diff options
author | Lennert Buytenhek <buytenh@wantstofly.org> | 2006-09-18 22:16:23 (GMT) |
---|---|---|
committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2006-09-25 09:25:39 (GMT) |
commit | 0cb015f9dea8a40d82d170be1a4f39ff909890bf (patch) | |
tree | 5621ee188d4a48dc8f412370a8153503f0dd545e /arch | |
parent | e25d64f1242e8586f6e20c26fd876a4d956a6c45 (diff) | |
download | linux-0cb015f9dea8a40d82d170be1a4f39ff909890bf.tar.xz |
[ARM] 3820/1: iop3xx: factor out shared pci code
Merge the iop32x PCI code and iop33x PCI code into plat-iop/pci.c.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/plat-iop/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/plat-iop/pci.c | 247 |
2 files changed, 248 insertions, 1 deletions
diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile index be6ab7c..efde7a5 100644 --- a/arch/arm/plat-iop/Makefile +++ b/arch/arm/plat-iop/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := i2c.o setup.o +obj-y := i2c.o pci.o setup.o obj-m := obj-n := obj- := diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c new file mode 100644 index 0000000..e647812 --- /dev/null +++ b/arch/arm/plat-iop/pci.c @@ -0,0 +1,247 @@ +/* + * arch/arm/plat-iop/pci.c + * + * PCI support for the Intel IOP32X and IOP33X processors + * + * Author: Rory Bolt <rorybolt@pacbell.net> + * Copyright (C) 2002 Rory Bolt + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/hardware.h> +#include <asm/mach/pci.h> +#include <asm/hardware/iop3xx.h> + +// #define DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) do { } while (0) +#endif + +/* + * This routine builds either a type0 or type1 configuration command. If the + * bus is on the 803xx then a type0 made, else a type1 is created. + */ +static u32 iop3xx_cfg_address(struct pci_bus *bus, int devfn, int where) +{ + struct pci_sys_data *sys = bus->sysdata; + u32 addr; + + if (sys->busnr == bus->number) + addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11); + else + addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1; + + addr |= PCI_FUNC(devfn) << 8 | (where & ~3); + + return addr; +} + +/* + * This routine checks the status of the last configuration cycle. If an error + * was detected it returns a 1, else it returns a 0. The errors being checked + * are parity, master abort, target abort (master and target). These types of + * errors occure during a config cycle where there is no device, like during + * the discovery stage. + */ +static int iop3xx_pci_status(void) +{ + unsigned int status; + int ret = 0; + + /* + * Check the status registers. + */ + status = *IOP3XX_ATUSR; + if (status & 0xf900) { + DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status); + *IOP3XX_ATUSR = status & 0xf900; + ret = 1; + } + + status = *IOP3XX_ATUISR; + if (status & 0x679f) { + DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status); + *IOP3XX_ATUISR = status & 0x679f; + ret = 1; + } + + return ret; +} + +/* + * Simply write the address register and read the configuration + * data. Note that the 4 nop's ensure that we are able to handle + * a delayed abort (in theory.) + */ +static inline u32 iop3xx_read(unsigned long addr) +{ + u32 val; + + __asm__ __volatile__( + "str %1, [%2]\n\t" + "ldr %0, [%3]\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + : "=r" (val) + : "r" (addr), "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR)); + + return val; +} + +/* + * The read routines must check the error status of the last configuration + * cycle. If there was an error, the routine returns all hex f's. + */ +static int +iop3xx_read_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *value) +{ + unsigned long addr = iop3xx_cfg_address(bus, devfn, where); + u32 val = iop3xx_read(addr) >> ((where & 3) * 8); + + if (iop3xx_pci_status()) + val = 0xffffffff; + + *value = val; + + return PCIBIOS_SUCCESSFUL; +} + +static int +iop3xx_write_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 value) +{ + unsigned long addr = iop3xx_cfg_address(bus, devfn, where); + u32 val; + + if (size != 4) { + val = iop3xx_read(addr); + if (iop3xx_pci_status()) + return PCIBIOS_SUCCESSFUL; + + where = (where & 3) * 8; + + if (size == 1) + val &= ~(0xff << where); + else + val &= ~(0xffff << where); + + *IOP3XX_OCCDR = val | value << where; + } else { + asm volatile( + "str %1, [%2]\n\t" + "str %0, [%3]\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + : + : "r" (value), "r" (addr), + "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR)); + } + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops iop3xx_ops = { + .read = iop3xx_read_config, + .write = iop3xx_write_config, +}; + +/* + * When a PCI device does not exist during config cycles, the 80200 gets a + * bus error instead of returning 0xffffffff. This handler simply returns. + */ +static int +iop3xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) +{ + DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n", + addr, fsr, regs->ARM_pc, regs->ARM_lr); + + /* + * If it was an imprecise abort, then we need to correct the + * return address to be _after_ the instruction. + */ + if (fsr & (1 << 10)) + regs->ARM_pc += 4; + + return 0; +} + +int iop3xx_pci_setup(int nr, struct pci_sys_data *sys) +{ + struct resource *res; + + if (nr != 0) + return 0; + + res = kzalloc(2 * sizeof(struct resource), GFP_KERNEL); + if (!res) + panic("PCI: unable to alloc resources"); + + res[0].start = IOP3XX_PCI_LOWER_IO_VA; + res[0].end = IOP3XX_PCI_LOWER_IO_VA + IOP3XX_PCI_IO_WINDOW_SIZE - 1; + res[0].name = "IOP3XX PCI I/O Space"; + res[0].flags = IORESOURCE_IO; + request_resource(&ioport_resource, &res[0]); + + res[1].start = IOP3XX_PCI_LOWER_MEM_PA; + res[1].end = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1; + res[1].name = "IOP3XX PCI Memory Space"; + res[1].flags = IORESOURCE_MEM; + request_resource(&iomem_resource, &res[1]); + + sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - IOP3XX_PCI_LOWER_MEM_BA; + sys->io_offset = IOP3XX_PCI_LOWER_IO_VA - IOP3XX_PCI_LOWER_IO_BA; + + sys->resource[0] = &res[0]; + sys->resource[1] = &res[1]; + sys->resource[2] = NULL; + + return 1; +} + +struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *sys) +{ + return pci_scan_bus(sys->busnr, &iop3xx_ops, sys); +} + +void iop3xx_pci_preinit(void) +{ + DBG("PCI: Intel 803xx PCI init code.\n"); + DBG("ATU: IOP3XX_ATUCMD=0x%04x\n", *IOP3XX_ATUCMD); + DBG("ATU: IOP3XX_OMWTVR0=0x%04x, IOP3XX_OIOWTVR=0x%04x\n", + *IOP3XX_OMWTVR0, + *IOP3XX_OIOWTVR); + DBG("ATU: IOP3XX_ATUCR=0x%08x\n", *IOP3XX_ATUCR); + DBG("ATU: IOP3XX_IABAR0=0x%08x IOP3XX_IALR0=0x%08x IOP3XX_IATVR0=%08x\n", + *IOP3XX_IABAR0, *IOP3XX_IALR0, *IOP3XX_IATVR0); + DBG("ATU: IOP3XX_OMWTVR0=0x%08x\n", *IOP3XX_OMWTVR0); + DBG("ATU: IOP3XX_IABAR1=0x%08x IOP3XX_IALR1=0x%08x\n", + *IOP3XX_IABAR1, *IOP3XX_IALR1); + DBG("ATU: IOP3XX_ERBAR=0x%08x IOP3XX_ERLR=0x%08x IOP3XX_ERTVR=%08x\n", + *IOP3XX_ERBAR, *IOP3XX_ERLR, *IOP3XX_ERTVR); + DBG("ATU: IOP3XX_IABAR2=0x%08x IOP3XX_IALR2=0x%08x IOP3XX_IATVR2=%08x\n", + *IOP3XX_IABAR2, *IOP3XX_IALR2, *IOP3XX_IATVR2); + DBG("ATU: IOP3XX_IABAR3=0x%08x IOP3XX_IALR3=0x%08x IOP3XX_IATVR3=%08x\n", + *IOP3XX_IABAR3, *IOP3XX_IALR3, *IOP3XX_IATVR3); + + hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, "imprecise external abort"); +} |