Merge commit 'v2.6.27-rc1' into x86/microcode

Conflicts:

	arch/x86/kernel/microcode.c

Manual resolutions:

	arch/x86/kernel/microcode_amd.c
	arch/x86/kernel/microcode_intel.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>

468 files changed, 40227 insertions, 2099 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c8f5282..257033c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -17,6 +17,7 @@ config ARM
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
 	select HAVE_FTRACE if (!XIP_KERNEL)
 	select HAVE_DYNAMIC_FTRACE if (HAVE_FTRACE)
+	select HAVE_GENERIC_DMA_COHERENT
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -234,6 +235,7 @@ config ARCH_VERSATILE
 config ARCH_AT91
 	bool "Atmel AT91"
 	select GENERIC_GPIO
+	select HAVE_CLK
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 and AT91CAP9 processors.
@@ -267,7 +269,6 @@ config ARCH_EP93XX
 	select ARM_VIC
 	select GENERIC_GPIO
 	select HAVE_CLK
-	select HAVE_CLK
 	select ARCH_REQUIRE_GPIOLIB
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c
index 333a82a..db7b3e3 100644
--- a/arch/arm/mm/consistent.c
+++ b/arch/arm/mm/consistent.c
@@ -274,6 +274,11 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 void *
 dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
 {
+	void *memory;
+
+	if (dma_alloc_from_coherent(dev, size, handle, &memory))
+		return memory;
+
 	if (arch_is_coherent()) {
 		void *virt;
 
@@ -362,6 +367,9 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr
 
 	WARN_ON(irqs_disabled());
 
+	if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
+		return;
+
 	if (arch_is_coherent()) {
 		kfree(cpu_addr);
 		return;
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index 2a92cb1..7a64fce 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -641,6 +641,7 @@ config PCI
        bool
        depends on ETRAX_CARDBUS
        default y
+       select HAVE_GENERIC_DMA_COHERENT
 
 config ETRAX_IOP_FW_LOAD
 	tristate "IO-processor hotplug firmware loading support"
diff --git a/arch/cris/arch-v32/drivers/pci/dma.c b/arch/cris/arch-v32/drivers/pci/dma.c
index e036465..fbe6595 100644
--- a/arch/cris/arch-v32/drivers/pci/dma.c
+++ b/arch/cris/arch-v32/drivers/pci/dma.c
@@ -15,35 +15,16 @@
 #include <linux/pci.h>
 #include <asm/io.h>
 
-struct dma_coherent_mem {
-	void		*virt_base;
-	u32		device_base;
-	int		size;
-	int		flags;
-	unsigned long	*bitmap;
-};
-
 void *dma_alloc_coherent(struct device *dev, size_t size,
 			   dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret;
-	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
 	int order = get_order(size);
 	/* ignore region specifiers */
 	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
 
-	if (mem) {
-		int page = bitmap_find_free_region(mem->bitmap, mem->size,
-						     order);
-		if (page >= 0) {
-			*dma_handle = mem->device_base + (page << PAGE_SHIFT);
-			ret = mem->virt_base + (page << PAGE_SHIFT);
-			memset(ret, 0, size);
-			return ret;
-		}
-		if (mem->flags & DMA_MEMORY_EXCLUSIVE)
-			return NULL;
-	}
+	if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
+		return ret;
 
 	if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff))
 		gfp |= GFP_DMA;
@@ -60,90 +41,9 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 void dma_free_coherent(struct device *dev, size_t size,
 			 void *vaddr, dma_addr_t dma_handle)
 {
-	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
 	int order = get_order(size);
 
-	if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) {
-		int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
-
-		bitmap_release_region(mem->bitmap, page, order);
-	} else
+	if (!dma_release_from_coherent(dev, order, vaddr))
 		free_pages((unsigned long)vaddr, order);
 }
 
-int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-				dma_addr_t device_addr, size_t size, int flags)
-{
-	void __iomem *mem_base;
-	int pages = size >> PAGE_SHIFT;
-	int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
-
-	if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0)
-		goto out;
-	if (!size)
-		goto out;
-	if (dev->dma_mem)
-		goto out;
-
-	/* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */
-
-	mem_base = ioremap(bus_addr, size);
-	if (!mem_base)
-		goto out;
-
-	dev->dma_mem = kzalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
-	if (!dev->dma_mem)
-		goto iounmap_out;
-	dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
-	if (!dev->dma_mem->bitmap)
-		goto free1_out;
-
-	dev->dma_mem->virt_base = mem_base;
-	dev->dma_mem->device_base = device_addr;
-	dev->dma_mem->size = pages;
-	dev->dma_mem->flags = flags;
-
-	if (flags & DMA_MEMORY_MAP)
-		return DMA_MEMORY_MAP;
-
-	return DMA_MEMORY_IO;
-
- free1_out:
-	kfree(dev->dma_mem);
- iounmap_out:
-	iounmap(mem_base);
- out:
-	return 0;
-}
-EXPORT_SYMBOL(dma_declare_coherent_memory);
-
-void dma_release_declared_memory(struct device *dev)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-
-	if(!mem)
-		return;
-	dev->dma_mem = NULL;
-	iounmap(mem->virt_base);
-	kfree(mem->bitmap);
-	kfree(mem);
-}
-EXPORT_SYMBOL(dma_release_declared_memory);
-
-void *dma_mark_declared_memory_occupied(struct device *dev,
-					dma_addr_t device_addr, size_t size)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-	int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1) >> PAGE_SHIFT;
-	int pos, err;
-
-	if (!mem)
-		return ERR_PTR(-EINVAL);
-
-	pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
-	err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages));
-	if (err != 0)
-		return ERR_PTR(err);
-	return mem->virt_base + (pos << PAGE_SHIFT);
-}
-EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index fe88418..587da5e 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -117,6 +117,7 @@ config PPC
 	select HAVE_KPROBES
 	select HAVE_ARCH_KGDB
 	select HAVE_KRETPROBES
+	select HAVE_ARCH_TRACEHOOK
 	select HAVE_LMB
 	select HAVE_DMA_ATTRS if PPC64
 	select USE_GENERIC_SMP_HELPERS if SMP
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 81c8324..1cbbf70 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -148,7 +148,7 @@ transfer_to_handler:
 	/* Check to see if the dbcr0 register is set up to debug.  Use the
 	   internal debug mode bit to do this. */
 	lwz	r12,THREAD_DBCR0(r12)
-	andis.	r12,r12,(DBCR0_IDM  | DBSR_DAC1R | DBSR_DAC1W)@h
+	andis.	r12,r12,DBCR0_IDM@h
 	beq+	3f
 	/* From user and task is ptraced - load up global dbcr0 */
 	li	r12,-1			/* clear all pending debug events */
@@ -292,7 +292,7 @@ syscall_exit_cont:
 	/* If the process has its own DBCR0 value, load it up.  The internal
 	   debug mode bit tells us that dbcr0 should be loaded. */
 	lwz	r0,THREAD+THREAD_DBCR0(r2)
-	andis.	r10,r0,(DBCR0_IDM  | DBSR_DAC1R | DBSR_DAC1W)@h
+	andis.	r10,r0,DBCR0_IDM@h
 	bnel-	load_dbcr0
 #endif
 #ifdef CONFIG_44x
@@ -343,7 +343,12 @@ syscall_dotrace:
 	stw	r0,_TRAP(r1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	do_syscall_trace_enter
-	lwz	r0,GPR0(r1)	/* Restore original registers */
+	/*
+	 * Restore argument registers possibly just changed.
+	 * We use the return value of do_syscall_trace_enter
+	 * for call number to look up in the table (r0).
+	 */
+	mr	r0,r3
 	lwz	r3,GPR3(r1)
 	lwz	r4,GPR4(r1)
 	lwz	r5,GPR5(r1)
@@ -720,7 +725,7 @@ restore_user:
 	/* Check whether this process has its own DBCR0 value.  The internal
 	   debug mode bit tells us that dbcr0 should be loaded. */
 	lwz	r0,THREAD+THREAD_DBCR0(r2)
-	andis.	r10,r0,(DBCR0_IDM  | DBSR_DAC1R | DBSR_DAC1W)@h
+	andis.	r10,r0,DBCR0_IDM@h
 	bnel-	load_dbcr0
 #endif
 
@@ -1055,8 +1060,8 @@ do_user_signal:			/* r10 contains MSR_KERNEL here */
 	SAVE_NVGPRS(r1)
 	rlwinm	r3,r3,0,0,30
 	stw	r3,_TRAP(r1)
-2:	li	r3,0
-	addi	r4,r1,STACK_FRAME_OVERHEAD
+2:	addi	r3,r1,STACK_FRAME_OVERHEAD
+	mr	r4,r9
 	bl	do_signal
 	REST_NVGPRS(r1)
 	b	recheck
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index d736924..2d802e9 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -214,7 +214,12 @@ syscall_dotrace:
 	bl	.save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.do_syscall_trace_enter
-	ld	r0,GPR0(r1)	/* Restore original registers */
+	/*
+	 * Restore argument registers possibly just changed.
+	 * We use the return value of do_syscall_trace_enter
+	 * for the call number to look up in the table (r0).
+	 */
+	mr	r0,r3
 	ld	r3,GPR3(r1)
 	ld	r4,GPR4(r1)
 	ld	r5,GPR5(r1)
@@ -638,8 +643,7 @@ user_work:
 	b	.ret_from_except_lite
 
 1:	bl	.save_nvgprs
-	li	r3,0
-	addi	r4,r1,STACK_FRAME_OVERHEAD
+	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.do_signal
 	b	.ret_from_except
 
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 4d96e1d..9ddfaef 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -493,18 +493,18 @@ static int __init serial_dev_init(void)
 device_initcall(serial_dev_init);
 
 
+#ifdef CONFIG_SERIAL_8250_CONSOLE
 /*
  * This is called very early, as part of console_init() (typically just after
  * time_init()). This function is respondible for trying to find a good
  * default console on serial ports. It tries to match the open firmware
- * default output with one of the available serial console drivers, either
- * one of the platform serial ports that have been probed earlier by
- * find_legacy_serial_ports() or some more platform specific ones.
+ * default output with one of the available serial console drivers that have
+ * been probed earlier by find_legacy_serial_ports()
  */
 static int __init check_legacy_serial_console(void)
 {
 	struct device_node *prom_stdout = NULL;
-	int speed = 0, offset = 0;
+	int i, speed = 0, offset = 0;
 	const char *name;
 	const u32 *spd;
 
@@ -548,31 +548,20 @@ static int __init check_legacy_serial_console(void)
 	if (spd)
 		speed = *spd;
 
-	if (0)
-		;
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	else if (strcmp(name, "serial") == 0) {
-		int i;
-		/* Look for it in probed array */
-		for (i = 0; i < legacy_serial_count; i++) {
-			if (prom_stdout != legacy_serial_infos[i].np)
-				continue;
-			offset = i;
-			speed = legacy_serial_infos[i].speed;
-			break;
-		}
-		if (i >= legacy_serial_count)
-			goto not_found;
+	if (strcmp(name, "serial") != 0)
+		goto not_found;
+
+	/* Look for it in probed array */
+	for (i = 0; i < legacy_serial_count; i++) {
+		if (prom_stdout != legacy_serial_infos[i].np)
+			continue;
+		offset = i;
+		speed = legacy_serial_infos[i].speed;
+		break;
 	}
-#endif /* CONFIG_SERIAL_8250_CONSOLE */
-#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
-	else if (strcmp(name, "ch-a") == 0)
-		offset = 0;
-	else if (strcmp(name, "ch-b") == 0)
-		offset = 1;
-#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
-	else
+	if (i >= legacy_serial_count)
 		goto not_found;
+
 	of_node_put(prom_stdout);
 
 	DBG("Found serial console at ttyS%d\n", offset);
@@ -591,3 +580,4 @@ static int __init check_legacy_serial_console(void)
 }
 console_initcall(check_legacy_serial_console);
 
+#endif /* CONFIG_SERIAL_8250_CONSOLE */
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index db2497c..e030f3b 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -254,7 +254,7 @@ void do_dabr(struct pt_regs *regs, unsigned long address,
 		return;
 
 	/* Clear the DAC and struct entries.  One shot trigger */
-#if (defined(CONFIG_44x) || defined(CONFIG_BOOKE))
+#if defined(CONFIG_BOOKE)
 	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | DBSR_DAC1W
 							| DBCR0_IDM));
 #endif
@@ -286,7 +286,7 @@ int set_dabr(unsigned long dabr)
 	mtspr(SPRN_DABR, dabr);
 #endif
 
-#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+#if defined(CONFIG_BOOKE)
 	mtspr(SPRN_DAC1, dabr);
 #endif
 
@@ -373,7 +373,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
 		set_dabr(new->thread.dabr);
 
-#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+#if defined(CONFIG_BOOKE)
 	/* If new thread DAC (HW breakpoint) is the same then leave it */
 	if (new->thread.dabr)
 		set_dabr(new->thread.dabr);
@@ -568,7 +568,7 @@ void flush_thread(void)
 		current->thread.dabr = 0;
 		set_dabr(0);
 
-#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+#if defined(CONFIG_BOOKE)
 		current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W);
 #endif
 	}
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index c4ab219..b72849a 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -205,8 +205,6 @@ static int __initdata mem_reserve_cnt;
 static cell_t __initdata regbuf[1024];
 
 
-#define MAX_CPU_THREADS 2
-
 /*
  * Error results ... some OF calls will return "-1" on error, some
  * will return 0, some will return either. To simplify, here are
@@ -1339,10 +1337,6 @@ static void __init prom_hold_cpus(void)
 	unsigned int reg;
 	phandle node;
 	char type[64];
-	int cpuid = 0;
-	unsigned int interrupt_server[MAX_CPU_THREADS];
-	unsigned int cpu_threads, hw_cpu_num;
-	int propsize;
 	struct prom_t *_prom = &RELOC(prom);
 	unsigned long *spinloop
 		= (void *) LOW_ADDR(__secondary_hold_spinloop);
@@ -1386,7 +1380,6 @@ static void __init prom_hold_cpus(void)
 		reg = -1;
 		prom_getprop(node, "reg", &reg, sizeof(reg));
 
-		prom_debug("\ncpuid        = 0x%x\n", cpuid);
 		prom_debug("cpu hw idx   = 0x%x\n", reg);
 
 		/* Init the acknowledge var which will be reset by
@@ -1395,28 +1388,9 @@ static void __init prom_hold_cpus(void)
 		 */
 		*acknowledge = (unsigned long)-1;
 
-		propsize = prom_getprop(node, "ibm,ppc-interrupt-server#s",
-					&interrupt_server,
-					sizeof(interrupt_server));
-		if (propsize < 0) {
-			/* no property.  old hardware has no SMT */
-			cpu_threads = 1;
-			interrupt_server[0] = reg; /* fake it with phys id */
-		} else {
-			/* We have a threaded processor */
-			cpu_threads = propsize / sizeof(u32);
-			if (cpu_threads > MAX_CPU_THREADS) {
-				prom_printf("SMT: too many threads!\n"
-					    "SMT: found %x, max is %x\n",
-					    cpu_threads, MAX_CPU_THREADS);
-				cpu_threads = 1; /* ToDo: panic? */
-			}
-		}
-
-		hw_cpu_num = interrupt_server[0];
-		if (hw_cpu_num != _prom->cpu) {
+		if (reg != _prom->cpu) {
 			/* Primary Thread of non-boot cpu */
-			prom_printf("%x : starting cpu hw idx %x... ", cpuid, reg);
+			prom_printf("starting cpu hw idx %x... ", reg);
 			call_prom("start-cpu", 3, 0, node,
 				  secondary_hold, reg);
 
@@ -1431,17 +1405,10 @@ static void __init prom_hold_cpus(void)
 		}
 #ifdef CONFIG_SMP
 		else
-			prom_printf("%x : boot cpu     %x\n", cpuid, reg);
+			prom_printf("boot cpu hw idx %x\n", reg);
 #endif /* CONFIG_SMP */
-
-		/* Reserve cpu #s for secondary threads.   They start later. */
-		cpuid += cpu_threads;
 	}
 
-	if (cpuid > NR_CPUS)
-		prom_printf("WARNING: maximum CPUs (" __stringify(NR_CPUS)
-			    ") exceeded: ignoring extras\n");
-
 	prom_debug("prom_hold_cpus: end...\n");
 }
 
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index a5d0e78..6b66cd8 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -22,6 +22,7 @@
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/regset.h>
+#include <linux/tracehook.h>
 #include <linux/elf.h>
 #include <linux/user.h>
 #include <linux/security.h>
@@ -717,7 +718,7 @@ void user_disable_single_step(struct task_struct *task)
 	struct pt_regs *regs = task->thread.regs;
 
 
-#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+#if defined(CONFIG_BOOKE)
 	/* If DAC then do not single step, skip */
 	if (task->thread.dabr)
 		return;
@@ -744,10 +745,11 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 	if (addr > 0)
 		return -EINVAL;
 
+	/* The bottom 3 bits in dabr are flags */
 	if ((data & ~0x7UL) >= TASK_SIZE)
 		return -EIO;
 
-#ifdef CONFIG_PPC64
+#ifndef CONFIG_BOOKE
 
 	/* For processors using DABR (i.e. 970), the bottom 3 bits are flags.
 	 *  It was assumed, on previous implementations, that 3 bits were
@@ -769,7 +771,7 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 	task->thread.dabr = data;
 
 #endif
-#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+#if defined(CONFIG_BOOKE)
 
 	/* As described above, it was assumed 3 bits were passed with the data
 	 *  address, but we will assume only the mode bits will be passed
@@ -1013,31 +1015,24 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return ret;
 }
 
-static void do_syscall_trace(void)
+/*
+ * We must return the syscall number to actually look up in the table.
+ * This can be -1L to skip running any syscall at all.
+ */
+long do_syscall_trace_enter(struct pt_regs *regs)
 {
-	/* the 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-}
+	long ret = 0;
 
-void do_syscall_trace_enter(struct pt_regs *regs)
-{
 	secure_computing(regs->gpr[0]);
 
-	if (test_thread_flag(TIF_SYSCALL_TRACE)
-	    && (current->ptrace & PT_PTRACED))
-		do_syscall_trace();
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    tracehook_report_syscall_entry(regs))
+		/*
+		 * Tracing decided this syscall should not happen.
+		 * We'll return a bogus call number to get an ENOSYS
+		 * error, but leave the original number in regs->gpr[0].
+		 */
+		ret = -1L;
 
 	if (unlikely(current->audit_context)) {
 #ifdef CONFIG_PPC64
@@ -1055,16 +1050,19 @@ void do_syscall_trace_enter(struct pt_regs *regs)
 					    regs->gpr[5] & 0xffffffff,
 					    regs->gpr[6] & 0xffffffff);
 	}
+
+	return ret ?: regs->gpr[0];
 }
 
 void do_syscall_trace_leave(struct pt_regs *regs)
 {
+	int step;
+
 	if (unlikely(current->audit_context))
 		audit_syscall_exit((regs->ccr&0x10000000)?AUDITSC_FAILURE:AUDITSC_SUCCESS,
 				   regs->result);
 
-	if ((test_thread_flag(TIF_SYSCALL_TRACE)
-	     || test_thread_flag(TIF_SINGLESTEP))
-	    && (current->ptrace & PT_PTRACED))
-		do_syscall_trace();
+	step = test_thread_flag(TIF_SINGLESTEP);
+	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, step);
 }
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 61a3f413..9cc5a52 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -367,7 +367,6 @@ static void __init cpu_init_thread_core_maps(int tpc)
  * setup_cpu_maps - initialize the following cpu maps:
  *                  cpu_possible_map
  *                  cpu_present_map
- *                  cpu_sibling_map
  *
  * Having the possible map set up early allows us to restrict allocations
  * of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
@@ -475,29 +474,6 @@ void __init smp_setup_cpu_maps(void)
 	 */
 	cpu_init_thread_core_maps(nthreads);
 }
-
-/*
- * Being that cpu_sibling_map is now a per_cpu array, then it cannot
- * be initialized until the per_cpu areas have been created.  This
- * function is now called from setup_per_cpu_areas().
- */
-void __init smp_setup_cpu_sibling_map(void)
-{
-#ifdef CONFIG_PPC64
-	int i, cpu, base;
-
-	for_each_possible_cpu(cpu) {
-		DBG("Sibling map for CPU %d:", cpu);
-		base = cpu_first_thread_in_core(cpu);
-		for (i = 0; i < threads_per_core; i++) {
-			cpu_set(base + i, per_cpu(cpu_sibling_map, cpu));
-			DBG(" %d", base + i);
-		}
-		DBG("\n");
-	}
-
-#endif /* CONFIG_PPC64 */
-}
 #endif /* CONFIG_SMP */
 
 #ifdef CONFIG_PCSPKR_PLATFORM
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 04d8de9..8b25f51 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -611,9 +611,6 @@ void __init setup_per_cpu_areas(void)
 		paca[i].data_offset = ptr - __per_cpu_start;
 		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
 	}
-
-	/* Now that per_cpu is setup, initialize cpu_sibling_map */
-	smp_setup_cpu_sibling_map();
 }
 #endif
 
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index 7aada78..a54405e 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -9,7 +9,7 @@
  * this archive for more details.
  */
 
-#include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/signal.h>
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
@@ -112,7 +112,7 @@ static void check_syscall_restart(struct pt_regs *regs, struct k_sigaction *ka,
 	}
 }
 
-int do_signal(sigset_t *oldset, struct pt_regs *regs)
+static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
 {
 	siginfo_t info;
 	int signr;
@@ -147,7 +147,7 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
 	 */
 	if (current->thread.dabr) {
 		set_dabr(current->thread.dabr);
-#if defined(CONFIG_44x) || defined(CONFIG_BOOKE)
+#if defined(CONFIG_BOOKE)
 		mtspr(SPRN_DBCR0, current->thread.dbcr0);
 #endif
 	}
@@ -177,11 +177,28 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
 		 * its frame, and we can clear the TLF_RESTORE_SIGMASK flag.
 		 */
 		current_thread_info()->local_flags &= ~_TLF_RESTORE_SIGMASK;
+
+		/*
+		 * Let tracing know that we've done the handler setup.
+		 */
+		tracehook_signal_handler(signr, &info, &ka, regs,
+					 test_thread_flag(TIF_SINGLESTEP));
 	}
 
 	return ret;
 }
 
+void do_signal(struct pt_regs *regs, unsigned long thread_info_flags)
+{
+	if (thread_info_flags & _TIF_SIGPENDING)
+		do_signal_pending(NULL, regs);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
+}
+
 long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 		unsigned long r5, unsigned long r6, unsigned long r7,
 		unsigned long r8, struct pt_regs *regs)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index f5ae9fa..5337ca7 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -41,6 +41,7 @@
 #include <asm/smp.h>
 #include <asm/time.h>
 #include <asm/machdep.h>
+#include <asm/cputhreads.h>
 #include <asm/cputable.h>
 #include <asm/system.h>
 #include <asm/mpic.h>
@@ -62,10 +63,12 @@ struct thread_info *secondary_ti;
 cpumask_t cpu_possible_map = CPU_MASK_NONE;
 cpumask_t cpu_online_map = CPU_MASK_NONE;
 DEFINE_PER_CPU(cpumask_t, cpu_sibling_map) = CPU_MASK_NONE;
+DEFINE_PER_CPU(cpumask_t, cpu_core_map) = CPU_MASK_NONE;
 
 EXPORT_SYMBOL(cpu_online_map);
 EXPORT_SYMBOL(cpu_possible_map);
 EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
+EXPORT_PER_CPU_SYMBOL(cpu_core_map);
 
 /* SMP operations for this machine */
 struct smp_ops_t *smp_ops;
@@ -228,6 +231,8 @@ void __devinit smp_prepare_boot_cpu(void)
 	BUG_ON(smp_processor_id() != boot_cpuid);
 
 	cpu_set(boot_cpuid, cpu_online_map);
+	cpu_set(boot_cpuid, per_cpu(cpu_sibling_map, boot_cpuid));
+	cpu_set(boot_cpuid, per_cpu(cpu_core_map, boot_cpuid));
 #ifdef CONFIG_PPC64
 	paca[boot_cpuid].__current = current;
 #endif
@@ -375,11 +380,60 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	return 0;
 }
 
+/* Return the value of the reg property corresponding to the given
+ * logical cpu.
+ */
+int cpu_to_core_id(int cpu)
+{
+	struct device_node *np;
+	const int *reg;
+	int id = -1;
+
+	np = of_get_cpu_node(cpu, NULL);
+	if (!np)
+		goto out;
+
+	reg = of_get_property(np, "reg", NULL);
+	if (!reg)
+		goto out;
+
+	id = *reg;
+out:
+	of_node_put(np);
+	return id;
+}
+
+/* Must be called when no change can occur to cpu_present_map,
+ * i.e. during cpu online or offline.
+ */
+static struct device_node *cpu_to_l2cache(int cpu)
+{
+	struct device_node *np;
+	const phandle *php;
+	phandle ph;
+
+	if (!cpu_present(cpu))
+		return NULL;
+
+	np = of_get_cpu_node(cpu, NULL);
+	if (np == NULL)
+		return NULL;
+
+	php = of_get_property(np, "l2-cache", NULL);
+	if (php == NULL)
+		return NULL;
+	ph = *php;
+	of_node_put(np);
+
+	return of_find_node_by_phandle(ph);
+}
 
 /* Activate a secondary processor. */
 int __devinit start_secondary(void *unused)
 {
 	unsigned int cpu = smp_processor_id();
+	struct device_node *l2_cache;
+	int i, base;
 
 	atomic_inc(&init_mm.mm_count);
 	current->active_mm = &init_mm;
@@ -400,6 +454,33 @@ int __devinit start_secondary(void *unused)
 
 	ipi_call_lock();
 	cpu_set(cpu, cpu_online_map);
+	/* Update sibling maps */
+	base = cpu_first_thread_in_core(cpu);
+	for (i = 0; i < threads_per_core; i++) {
+		if (cpu_is_offline(base + i))
+			continue;
+		cpu_set(cpu, per_cpu(cpu_sibling_map, base + i));
+		cpu_set(base + i, per_cpu(cpu_sibling_map, cpu));
+
+		/* cpu_core_map should be a superset of
+		 * cpu_sibling_map even if we don't have cache
+		 * information, so update the former here, too.
+		 */
+		cpu_set(cpu, per_cpu(cpu_core_map, base +i));
+		cpu_set(base + i, per_cpu(cpu_core_map, cpu));
+	}
+	l2_cache = cpu_to_l2cache(cpu);
+	for_each_online_cpu(i) {
+		struct device_node *np = cpu_to_l2cache(i);
+		if (!np)
+			continue;
+		if (np == l2_cache) {
+			cpu_set(cpu, per_cpu(cpu_core_map, i));
+			cpu_set(i, per_cpu(cpu_core_map, cpu));
+		}
+		of_node_put(np);
+	}
+	of_node_put(l2_cache);
 	ipi_call_unlock();
 
 	local_irq_enable();
@@ -437,10 +518,42 @@ void __init smp_cpus_done(unsigned int max_cpus)
 #ifdef CONFIG_HOTPLUG_CPU
 int __cpu_disable(void)
 {
-	if (smp_ops->cpu_disable)
-		return smp_ops->cpu_disable();
+	struct device_node *l2_cache;
+	int cpu = smp_processor_id();
+	int base, i;
+	int err;
 
-	return -ENOSYS;
+	if (!smp_ops->cpu_disable)
+		return -ENOSYS;
+
+	err = smp_ops->cpu_disable();
+	if (err)
+		return err;
+
+	/* Update sibling maps */
+	base = cpu_first_thread_in_core(cpu);
+	for (i = 0; i < threads_per_core; i++) {
+		cpu_clear(cpu, per_cpu(cpu_sibling_map, base + i));
+		cpu_clear(base + i, per_cpu(cpu_sibling_map, cpu));
+		cpu_clear(cpu, per_cpu(cpu_core_map, base +i));
+		cpu_clear(base + i, per_cpu(cpu_core_map, cpu));
+	}
+
+	l2_cache = cpu_to_l2cache(cpu);
+	for_each_present_cpu(i) {
+		struct device_node *np = cpu_to_l2cache(i);
+		if (!np)
+			continue;
+		if (np == l2_cache) {
+			cpu_clear(cpu, per_cpu(cpu_core_map, i));
+			cpu_clear(i, per_cpu(cpu_core_map, cpu));
+		}
+		of_node_put(np);
+	}
+	of_node_put(l2_cache);
+
+
+	return 0;
 }
 
 void __cpu_die(unsigned int cpu)
diff --git a/arch/powerpc/kernel/stacktrace.c b/arch/powerpc/kernel/stacktrace.c
index f258964..b0dbb1d 100644
--- a/arch/powerpc/kernel/stacktrace.c
+++ b/arch/powerpc/kernel/stacktrace.c
@@ -13,7 +13,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
-#include <linux/module.h>
 #include <asm/ptrace.h>
 #include <asm/processor.h>
 
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index 800e5e9..56d172d 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -22,6 +22,8 @@
 
 static DEFINE_PER_CPU(struct cpu, cpu_devices);
 
+static DEFINE_PER_CPU(struct kobject *, cache_toplevel);
+
 /* SMT stuff */
 
 #ifdef CONFIG_PPC_MULTIPLATFORM
@@ -297,8 +299,289 @@ static struct sysdev_attribute pa6t_attrs[] = {
 #endif /* CONFIG_DEBUG_KERNEL */
 };
 
+struct cache_desc {
+	struct kobject kobj;
+	struct cache_desc *next;
+	const char *type;	/* Instruction, Data, or Unified */
+	u32 size;		/* total cache size in KB */
+	u32 line_size;		/* in bytes */
+	u32 nr_sets;		/* number of sets */
+	u32 level;		/* e.g. 1, 2, 3... */
+	u32 associativity;	/* e.g. 8-way... 0 is fully associative */
+};
+
+DEFINE_PER_CPU(struct cache_desc *, cache_desc);
+
+static struct cache_desc *kobj_to_cache_desc(struct kobject *k)
+{
+	return container_of(k, struct cache_desc, kobj);
+}
+
+static void cache_desc_release(struct kobject *k)
+{
+	struct cache_desc *desc = kobj_to_cache_desc(k);
+
+	pr_debug("%s: releasing %s\n", __func__, kobject_name(k));
+
+	if (desc->next)
+		kobject_put(&desc->next->kobj);
+
+	kfree(kobj_to_cache_desc(k));
+}
+
+static ssize_t cache_desc_show(struct kobject *k, struct attribute *attr, char *buf)
+{
+	struct kobj_attribute *kobj_attr;
+
+	kobj_attr = container_of(attr, struct kobj_attribute, attr);
+
+	return kobj_attr->show(k, kobj_attr, buf);
+}
+
+static struct sysfs_ops cache_desc_sysfs_ops = {
+	.show = cache_desc_show,
+};
+
+static struct kobj_type cache_desc_type = {
+	.release = cache_desc_release,
+	.sysfs_ops = &cache_desc_sysfs_ops,
+};
+
+static ssize_t cache_size_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+	struct cache_desc *cache = kobj_to_cache_desc(k);
+
+	return sprintf(buf, "%uK\n", cache->size);
+}
+
+static struct kobj_attribute cache_size_attr =
+	__ATTR(size, 0444, cache_size_show, NULL);
+
+static ssize_t cache_line_size_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+	struct cache_desc *cache = kobj_to_cache_desc(k);
+
+	return sprintf(buf, "%u\n", cache->line_size);
+}
+
+static struct kobj_attribute cache_line_size_attr =
+	__ATTR(coherency_line_size, 0444, cache_line_size_show, NULL);
+
+static ssize_t cache_nr_sets_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+	struct cache_desc *cache = kobj_to_cache_desc(k);
+
+	return sprintf(buf, "%u\n", cache->nr_sets);
+}
+
+static struct kobj_attribute cache_nr_sets_attr =
+	__ATTR(number_of_sets, 0444, cache_nr_sets_show, NULL);
+
+static ssize_t cache_type_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+	struct cache_desc *cache = kobj_to_cache_desc(k);
+
+	return sprintf(buf, "%s\n", cache->type);
+}
+
+static struct kobj_attribute cache_type_attr =
+	__ATTR(type, 0444, cache_type_show, NULL);
+
+static ssize_t cache_level_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+	struct cache_desc *cache = kobj_to_cache_desc(k);
+
+	return sprintf(buf, "%u\n", cache->level);
+}
+
+static struct kobj_attribute cache_level_attr =
+	__ATTR(level, 0444, cache_level_show, NULL);
+
+static ssize_t cache_assoc_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+	struct cache_desc *cache = kobj_to_cache_desc(k);
+
+	return sprintf(buf, "%u\n", cache->associativity);
+}
+
+static struct kobj_attribute cache_assoc_attr =
+	__ATTR(ways_of_associativity, 0444, cache_assoc_show, NULL);
+
+struct cache_desc_info {
+	const char *type;
+	const char *size_prop;
+	const char *line_size_prop;
+	const char *nr_sets_prop;
+};
+
+/* PowerPC Processor binding says the [di]-cache-* must be equal on
+ * unified caches, so just use d-cache properties. */
+static struct cache_desc_info ucache_info = {
+	.type = "Unified",
+	.size_prop = "d-cache-size",
+	.line_size_prop = "d-cache-line-size",
+	.nr_sets_prop = "d-cache-sets",
+};
 
-static void register_cpu_online(unsigned int cpu)
+static struct cache_desc_info dcache_info = {
+	.type = "Data",
+	.size_prop = "d-cache-size",
+	.line_size_prop = "d-cache-line-size",
+	.nr_sets_prop = "d-cache-sets",
+};
+
+static struct cache_desc_info icache_info = {
+	.type = "Instruction",
+	.size_prop = "i-cache-size",
+	.line_size_prop = "i-cache-line-size",
+	.nr_sets_prop = "i-cache-sets",
+};
+
+static struct cache_desc * __cpuinit create_cache_desc(struct device_node *np, struct kobject *parent, int index, int level, struct cache_desc_info *info)
+{
+	const u32 *cache_line_size;
+	struct cache_desc *new;
+	const u32 *cache_size;
+	const u32 *nr_sets;
+	int rc;
+
+	new = kzalloc(sizeof(*new), GFP_KERNEL);
+	if (!new)
+		return NULL;
+
+	rc = kobject_init_and_add(&new->kobj, &cache_desc_type, parent,
+				  "index%d", index);
+	if (rc)
+		goto err;
+
+	/* type */
+	new->type = info->type;
+	rc = sysfs_create_file(&new->kobj, &cache_type_attr.attr);
+	WARN_ON(rc);
+
+	/* level */
+	new->level = level;
+	rc = sysfs_create_file(&new->kobj, &cache_level_attr.attr);
+	WARN_ON(rc);
+
+	/* size */
+	cache_size = of_get_property(np, info->size_prop, NULL);
+	if (cache_size) {
+		new->size = *cache_size / 1024;
+		rc = sysfs_create_file(&new->kobj,
+				       &cache_size_attr.attr);
+		WARN_ON(rc);
+	}
+
+	/* coherency_line_size */
+	cache_line_size = of_get_property(np, info->line_size_prop, NULL);
+	if (cache_line_size) {
+		new->line_size = *cache_line_size;
+		rc = sysfs_create_file(&new->kobj,
+				       &cache_line_size_attr.attr);
+		WARN_ON(rc);
+	}
+
+	/* number_of_sets */
+	nr_sets = of_get_property(np, info->nr_sets_prop, NULL);
+	if (nr_sets) {
+		new->nr_sets = *nr_sets;
+		rc = sysfs_create_file(&new->kobj,
+				       &cache_nr_sets_attr.attr);
+		WARN_ON(rc);
+	}
+
+	/* ways_of_associativity */
+	if (new->nr_sets == 1) {
+		/* fully associative */
+		new->associativity = 0;
+		goto create_assoc;
+	}
+
+	if (new->nr_sets && new->size && new->line_size) {
+		/* If we have values for all of these we can derive
+		 * the associativity. */
+		new->associativity =
+			((new->size * 1024) / new->nr_sets) / new->line_size;
+create_assoc:
+		rc = sysfs_create_file(&new->kobj,
+				       &cache_assoc_attr.attr);
+		WARN_ON(rc);
+	}
+
+	return new;
+err:
+	kfree(new);
+	return NULL;
+}
+
+static bool cache_is_unified(struct device_node *np)
+{
+	return of_get_property(np, "cache-unified", NULL);
+}
+
+static struct cache_desc * __cpuinit create_cache_index_info(struct device_node *np, struct kobject *parent, int index, int level)
+{
+	const phandle *next_cache_phandle;
+	struct device_node *next_cache;
+	struct cache_desc *new, **end;
+
+	pr_debug("%s(node = %s, index = %d)\n", __func__, np->full_name, index);
+
+	if (cache_is_unified(np)) {
+		new = create_cache_desc(np, parent, index, level,
+					&ucache_info);
+	} else {
+		new = create_cache_desc(np, parent, index, level,
+					&dcache_info);
+		if (new) {
+			index++;
+			new->next = create_cache_desc(np, parent, index, level,
+						      &icache_info);
+		}
+	}
+	if (!new)
+		return NULL;
+
+	end = &new->next;
+	while (*end)
+		end = &(*end)->next;
+
+	next_cache_phandle = of_get_property(np, "l2-cache", NULL);
+	if (!next_cache_phandle)
+		goto out;
+
+	next_cache = of_find_node_by_phandle(*next_cache_phandle);
+	if (!next_cache)
+		goto out;
+
+	*end = create_cache_index_info(next_cache, parent, ++index, ++level);
+
+	of_node_put(next_cache);
+out:
+	return new;
+}
+
+static void __cpuinit create_cache_info(struct sys_device *sysdev)
+{
+	struct kobject *cache_toplevel;
+	struct device_node *np = NULL;
+	int cpu = sysdev->id;
+
+	cache_toplevel = kobject_create_and_add("cache", &sysdev->kobj);
+	if (!cache_toplevel)
+		return;
+	per_cpu(cache_toplevel, cpu) = cache_toplevel;
+	np = of_get_cpu_node(cpu, NULL);
+	if (np != NULL) {
+		per_cpu(cache_desc, cpu) =
+			create_cache_index_info(np, cache_toplevel, 0, 1);
+		of_node_put(np);
+	}
+	return;
+}
+
+static void __cpuinit register_cpu_online(unsigned int cpu)
 {
 	struct cpu *c = &per_cpu(cpu_devices, cpu);
 	struct sys_device *s = &c->sysdev;
@@ -346,9 +629,33 @@ static void register_cpu_online(unsigned int cpu)
 
 	if (cpu_has_feature(CPU_FTR_DSCR))
 		sysdev_create_file(s, &attr_dscr);
+
+	create_cache_info(s);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
+static void remove_cache_info(struct sys_device *sysdev)
+{
+	struct kobject *cache_toplevel;
+	struct cache_desc *cache_desc;
+	int cpu = sysdev->id;
+
+	cache_desc = per_cpu(cache_desc, cpu);
+	if (cache_desc != NULL) {
+		sysfs_remove_file(&cache_desc->kobj, &cache_size_attr.attr);
+		sysfs_remove_file(&cache_desc->kobj, &cache_line_size_attr.attr);
+		sysfs_remove_file(&cache_desc->kobj, &cache_type_attr.attr);
+		sysfs_remove_file(&cache_desc->kobj, &cache_level_attr.attr);
+		sysfs_remove_file(&cache_desc->kobj, &cache_nr_sets_attr.attr);
+		sysfs_remove_file(&cache_desc->kobj, &cache_assoc_attr.attr);
+
+		kobject_put(&cache_desc->kobj);
+	}
+	cache_toplevel = per_cpu(cache_toplevel, cpu);
+	if (cache_toplevel != NULL)
+		kobject_put(cache_toplevel);
+}
+
 static void unregister_cpu_online(unsigned int cpu)
 {
 	struct cpu *c = &per_cpu(cpu_devices, cpu);
@@ -399,6 +706,8 @@ static void unregister_cpu_online(unsigned int cpu)
 
 	if (cpu_has_feature(CPU_FTR_DSCR))
 		sysdev_remove_file(s, &attr_dscr);
+
+	remove_cache_info(s);
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index ade8aea..22a3c33 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -530,7 +530,7 @@ static dma_addr_t vio_dma_iommu_map_single(struct device *dev, void *vaddr,
 	}
 
 	ret = dma_iommu_ops.map_single(dev, vaddr, size, direction, attrs);
-	if (unlikely(dma_mapping_error(ret))) {
+	if (unlikely(dma_mapping_error(dev, ret))) {
 		vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
 		atomic_inc(&viodev->cmo.allocs_failed);
 	}
@@ -1031,8 +1031,8 @@ void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired) {}
 static int vio_cmo_bus_probe(struct vio_dev *viodev) { return 0; }
 static void vio_cmo_bus_remove(struct vio_dev *viodev) {}
 static void vio_cmo_set_dma_ops(struct vio_dev *viodev) {}
-static void vio_cmo_bus_init() {}
-static void vio_cmo_sysfs_init() { }
+static void vio_cmo_bus_init(void) {}
+static void vio_cmo_sysfs_init(void) { }
 #endif /* CONFIG_PPC_SMLPAR */
 EXPORT_SYMBOL(vio_cmo_entitlement_update);
 EXPORT_SYMBOL(vio_cmo_set_dev_desired);
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index ed0aab0..f1c2d55 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -736,14 +736,21 @@ static int __init hugetlbpage_init(void)
 
 	if (!cpu_has_feature(CPU_FTR_16M_PAGE))
 		return -ENODEV;
+
 	/* Add supported huge page sizes.  Need to change HUGE_MAX_HSTATE
 	 * and adjust PTE_NONCACHE_NUM if the number of supported huge page
 	 * sizes changes.
 	 */
 	set_huge_psize(MMU_PAGE_16M);
-	set_huge_psize(MMU_PAGE_64K);
 	set_huge_psize(MMU_PAGE_16G);
 
+	/* Temporarily disable support for 64K huge pages when 64K SPU local
+	 * store support is enabled as the current implementation conflicts.
+	 */
+#ifndef CONFIG_SPU_FS_64K_LS
+	set_huge_psize(MMU_PAGE_64K);
+#endif
+
 	for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
 		if (mmu_huge_psizes[psize]) {
 			huge_pgtable_cache(psize) = kmem_cache_create(
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 3163544..88ccf3a 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -541,6 +541,78 @@ static int __init pmac_declare_of_platform_devices(void)
 }
 machine_device_initcall(powermac, pmac_declare_of_platform_devices);
 
+#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
+/*
+ * This is called very early, as part of console_init() (typically just after
+ * time_init()). This function is respondible for trying to find a good
+ * default console on serial ports. It tries to match the open firmware
+ * default output with one of the available serial console drivers.
+ */
+static int __init check_pmac_serial_console(void)
+{
+	struct device_node *prom_stdout = NULL;
+	int offset = 0;
+	const char *name;
+#ifdef CONFIG_SERIAL_PMACZILOG_TTYS
+	char *devname = "ttyS";
+#else
+	char *devname = "ttyPZ";
+#endif
+
+	pr_debug(" -> check_pmac_serial_console()\n");
+
+	/* The user has requested a console so this is already set up. */
+	if (strstr(boot_command_line, "console=")) {
+		pr_debug(" console was specified !\n");
+		return -EBUSY;
+	}
+
+	if (!of_chosen) {
+		pr_debug(" of_chosen is NULL !\n");
+		return -ENODEV;
+	}
+
+	/* We are getting a weird phandle from OF ... */
+	/* ... So use the full path instead */
+	name = of_get_property(of_chosen, "linux,stdout-path", NULL);
+	if (name == NULL) {
+		pr_debug(" no linux,stdout-path !\n");
+		return -ENODEV;
+	}
+	prom_stdout = of_find_node_by_path(name);
+	if (!prom_stdout) {
+		pr_debug(" can't find stdout package %s !\n", name);
+		return -ENODEV;
+	}
+	pr_debug("stdout is %s\n", prom_stdout->full_name);
+
+	name = of_get_property(prom_stdout, "name", NULL);
+	if (!name) {
+		pr_debug(" stdout package has no name !\n");
+		goto not_found;
+	}
+
+	if (strcmp(name, "ch-a") == 0)
+		offset = 0;
+	else if (strcmp(name, "ch-b") == 0)
+		offset = 1;
+	else
+		goto not_found;
+	of_node_put(prom_stdout);
+
+	pr_debug("Found serial console at %s%d\n", devname, offset);
+
+	return add_preferred_console(devname, offset, NULL);
+
+ not_found:
+	pr_debug("No preferred console found !\n");
+	of_node_put(prom_stdout);
+	return -ENODEV;
+}
+console_initcall(check_pmac_serial_console);
+
+#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
+
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
  */
diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c
index 47de4d3..572771f 100644
--- a/arch/powerpc/platforms/powermac/udbg_scc.c
+++ b/arch/powerpc/platforms/powermac/udbg_scc.c
@@ -125,13 +125,23 @@ void udbg_scc_init(int force_scc)
 	out_8(sccc, 0xc0);
 
 	/* If SCC was the OF output port, read the BRG value, else
-	 * Setup for 57600 8N1
+	 * Setup for 38400 or 57600 8N1 depending on the machine
 	 */
 	if (ch_def != NULL) {
 		out_8(sccc, 13);
 		scc_inittab[1] = in_8(sccc);
 		out_8(sccc, 12);
 		scc_inittab[3] = in_8(sccc);
+	} else if (machine_is_compatible("RackMac1,1")
+		   || machine_is_compatible("RackMac1,2")
+		   || machine_is_compatible("MacRISC4")) {
+		/* Xserves and G5s default to 57600 */
+		scc_inittab[1] = 0;
+		scc_inittab[3] = 0;
+	} else {
+		/* Others default to 38400 */
+		scc_inittab[1] = 0;
+		scc_inittab[3] = 1;
 	}
 
 	for (i = 0; i < sizeof(scc_inittab); ++i)
diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c
index c6b3be0..38fe32a 100644
--- a/arch/powerpc/platforms/pseries/cmm.c
+++ b/arch/powerpc/platforms/pseries/cmm.c
@@ -289,7 +289,9 @@ static int cmm_thread(void *dummy)
 }
 
 #define CMM_SHOW(name, format, args...)			\
-	static ssize_t show_##name(struct sys_device *dev, char *buf)	\
+	static ssize_t show_##name(struct sys_device *dev,	\
+				   struct sysdev_attribute *attr,	\
+				   char *buf)			\
 	{							\
 		return sprintf(buf, format, ##args);		\
 	}							\
@@ -298,12 +300,14 @@ static int cmm_thread(void *dummy)
 CMM_SHOW(loaned_kb, "%lu\n", PAGES2KB(loaned_pages));
 CMM_SHOW(loaned_target_kb, "%lu\n", PAGES2KB(loaned_pages_target));
 
-static ssize_t show_oom_pages(struct sys_device *dev, char *buf)
+static ssize_t show_oom_pages(struct sys_device *dev,
+			      struct sysdev_attribute *attr, char *buf)
 {
 	return sprintf(buf, "%lu\n", PAGES2KB(oom_freed_pages));
 }
 
 static ssize_t store_oom_pages(struct sys_device *dev,
+			       struct sysdev_attribute *attr,
 			       const char *buf, size_t count)
 {
 	unsigned long val = simple_strtoul (buf, NULL, 10);
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 4f82e5b..569079e 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -197,7 +197,7 @@ void __kprobes arch_arm_kprobe(struct kprobe *p)
 	args.new = BREAKPOINT_INSTRUCTION;
 
 	kcb->kprobe_status = KPROBE_SWAP_INST;
-	stop_machine_run(swap_instruction, &args, NR_CPUS);
+	stop_machine(swap_instruction, &args, NULL);
 	kcb->kprobe_status = status;
 }
 
@@ -212,7 +212,7 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p)
 	args.new = p->opcode;
 
 	kcb->kprobe_status = KPROBE_SWAP_INST;
-	stop_machine_run(swap_instruction, &args, NR_CPUS);
+	stop_machine(swap_instruction, &args, NULL);
 	kcb->kprobe_status = status;
 }
 
@@ -331,7 +331,7 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 		 * No kprobe at this address. The fault has not been
 		 * caused by a kprobe breakpoint. The race of breakpoint
 		 * vs. kprobe remove does not exist because on s390 we
-		 * use stop_machine_run to arm/disarm the breakpoints.
+		 * use stop_machine to arm/disarm the breakpoints.
 		 */
 		goto no_kprobe;
 
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 8879938..0b88dc4 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -11,6 +11,7 @@ config SUPERH
 	select HAVE_CLK
 	select HAVE_IDE
 	select HAVE_OPROFILE
+	select HAVE_GENERIC_DMA_COHERENT
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast
@@ -477,6 +478,10 @@ config SH_RTS7751R2D
 	  Select RTS7751R2D if configuring for a Renesas Technology
 	  Sales SH-Graphics board.
 
+config SH_RSK7203
+	bool "RSK7203"
+	depends on CPU_SUBTYPE_SH7203
+
 config SH_SDK7780
 	bool "SDK7780R3"
 	depends on CPU_SUBTYPE_SH7780
@@ -491,6 +496,21 @@ config SH_HIGHLANDER
 	select SYS_SUPPORTS_PCI
 	select IO_TRAPPED
 
+config SH_SH7785LCR
+	bool "SH7785LCR"
+	depends on CPU_SUBTYPE_SH7785
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED
+
+config SH_SH7785LCR_29BIT_PHYSMAPS
+	bool "SH7785LCR 29bit physmaps"
+	depends on SH_SH7785LCR
+	default y
+	help
+	  This board has 2 physical memory maps. It can be changed with
+	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
+	  you can access all on-board device in 29bit address mode.
+
 config SH_MIGOR
 	bool "Migo-R"
 	depends on CPU_SUBTYPE_SH7722
@@ -498,6 +518,20 @@ config SH_MIGOR
 	  Select Migo-R if configuring for the SH7722 Migo-R platform
           by Renesas System Solutions Asia Pte. Ltd.
 
+config SH_AP325RXA
+	bool "AP-325RXA"
+	depends on CPU_SUBTYPE_SH7723
+	help
+	  Renesas "AP-325RXA" support.
+	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
+
+config SH_SH7763RDP
+	bool "SH7763RDP"
+	depends on CPU_SUBTYPE_SH7763
+	help
+	  Select SH7763RDP if configuring for a Renesas SH7763
+	  evaluation board.
+
 config SH_EDOSK7705
 	bool "EDOSK7705"
 	depends on CPU_SUBTYPE_SH7705
@@ -559,6 +593,7 @@ endmenu
 source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
 source "arch/sh/boards/renesas/r7780rp/Kconfig"
 source "arch/sh/boards/renesas/sdk7780/Kconfig"
+source "arch/sh/boards/renesas/migor/Kconfig"
 source "arch/sh/boards/magicpanelr2/Kconfig"
 
 menu "Timer and clock configuration"
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 0f45498..36f4b1f 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -36,7 +36,8 @@ config EARLY_SCIF_CONSOLE_PORT
 	default "0xff804000" if CPU_SUBTYPE_MXG
 	default "0xffc30000" if CPU_SUBTYPE_SHX3
 	default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \
-				CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366
+				CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \
+				CPU_SUBTYPE_SH7343
 	default "0xffe80000" if CPU_SH4
 	default "0xffea0000" if CPU_SUBTYPE_SH7785
 	default "0xfffe8000" if CPU_SUBTYPE_SH7203
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index fb7b1b1..c627e45 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -121,6 +121,10 @@ machdir-$(CONFIG_SH_HIGHLANDER)			+= renesas/r7780rp
 machdir-$(CONFIG_SH_MIGOR)			+= renesas/migor
 machdir-$(CONFIG_SH_SDK7780)			+= renesas/sdk7780
 machdir-$(CONFIG_SH_X3PROTO)			+= renesas/x3proto
+machdir-$(CONFIG_SH_RSK7203)			+= renesas/rsk7203
+machdir-$(CONFIG_SH_AP325RXA)			+= renesas/ap325rxa
+machdir-$(CONFIG_SH_SH7763RDP)			+= renesas/sh7763rdp
+machdir-$(CONFIG_SH_SH7785LCR)			+= renesas/sh7785lcr
 machdir-$(CONFIG_SH_SH4202_MICRODEV)		+= superh/microdev
 machdir-$(CONFIG_SH_LANDISK)			+= landisk
 machdir-$(CONFIG_SH_TITAN)			+= titan
diff --git a/arch/sh/boards/dreamcast/rtc.c b/arch/sh/boards/dreamcast/rtc.c
index b3a876a..a743368 100644
--- a/arch/sh/boards/dreamcast/rtc.c
+++ b/arch/sh/boards/dreamcast/rtc.c
@@ -30,7 +30,7 @@
  *
  * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch.
  */
-void aica_rtc_gettimeofday(struct timespec *ts)
+static void aica_rtc_gettimeofday(struct timespec *ts)
 {
 	unsigned long val1, val2;
 
@@ -54,7 +54,7 @@ void aica_rtc_gettimeofday(struct timespec *ts)
  *
  * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter.
  */
-int aica_rtc_settimeofday(const time_t secs)
+static int aica_rtc_settimeofday(const time_t secs)
 {
 	unsigned long val1, val2;
 	unsigned long adj = secs + TWENTY_YEARS;
diff --git a/arch/sh/boards/renesas/ap325rxa/Makefile b/arch/sh/boards/renesas/ap325rxa/Makefile
new file mode 100644
index 0000000..f663768
--- /dev/null
+++ b/arch/sh/boards/renesas/ap325rxa/Makefile
@@ -0,0 +1 @@
+obj-y	:= setup.o
diff --git a/arch/sh/boards/renesas/ap325rxa/setup.c b/arch/sh/boards/renesas/ap325rxa/setup.c
new file mode 100644
index 0000000..7fa7446
--- /dev/null
+++ b/arch/sh/boards/renesas/ap325rxa/setup.c
@@ -0,0 +1,313 @@
+/*
+ * Renesas - AP-325RXA
+ * (Compatible with Algo System ., LTD. - AP-320A)
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Author : Yusuke Goda <goda.yuske@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/smc911x.h>
+#include <media/soc_camera_platform.h>
+#include <media/sh_mobile_ceu.h>
+#include <asm/sh_mobile_lcdc.h>
+#include <asm/io.h>
+#include <asm/clock.h>
+
+static struct smc911x_platdata smc911x_info = {
+	.flags = SMC911X_USE_32BIT,
+	.irq_flags = IRQF_TRIGGER_LOW,
+};
+
+static struct resource smc9118_resources[] = {
+	[0] = {
+		.start	= 0xb6080000,
+		.end	= 0xb60fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 35,
+		.end	= 35,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device smc9118_device = {
+	.name		= "smc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc9118_resources),
+	.resource	= smc9118_resources,
+	.dev		= {
+		.platform_data = &smc911x_info,
+	},
+};
+
+static struct mtd_partition ap325rxa_nor_flash_partitions[] = {
+	{
+		 .name = "uboot",
+		 .offset = 0,
+		 .size = (1 * 1024 * 1024),
+		 .mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		 .name = "kernel",
+		 .offset = MTDPART_OFS_APPEND,
+		 .size = (2 * 1024 * 1024),
+	}, {
+		 .name = "other",
+		 .offset = MTDPART_OFS_APPEND,
+		 .size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data ap325rxa_nor_flash_data = {
+	.width		= 2,
+	.parts		= ap325rxa_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(ap325rxa_nor_flash_partitions),
+};
+
+static struct resource ap325rxa_nor_flash_resources[] = {
+	[0] = {
+		.name	= "NOR Flash",
+		.start	= 0x00000000,
+		.end	= 0x00ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device ap325rxa_nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= ap325rxa_nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(ap325rxa_nor_flash_resources),
+	.dev		= {
+		.platform_data = &ap325rxa_nor_flash_data,
+	},
+};
+
+#define FPGA_LCDREG	0xB4100180
+#define FPGA_BKLREG	0xB4100212
+#define FPGA_LCDREG_VAL	0x0018
+#define PORT_PHCR	0xA405010E
+#define PORT_PLCR	0xA4050114
+#define PORT_PMCR	0xA4050116
+#define PORT_PRCR	0xA405011C
+#define PORT_PSCR	0xA405011E
+#define PORT_PZCR	0xA405014C
+#define PORT_HIZCRA	0xA4050158
+#define PORT_MSELCRB	0xA4050182
+#define PORT_PSDR	0xA405013E
+#define PORT_PZDR	0xA405016C
+#define PORT_PSELD	0xA4050154
+
+static void ap320_wvga_power_on(void *board_data)
+{
+	msleep(100);
+
+	/* ASD AP-320/325 LCD ON */
+	ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG);
+
+	/* backlight */
+	ctrl_outw((ctrl_inw(PORT_PSCR) & ~0x00C0) | 0x40, PORT_PSCR);
+	ctrl_outb(ctrl_inb(PORT_PSDR) & ~0x08, PORT_PSDR);
+	ctrl_outw(0x100, FPGA_BKLREG);
+}
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.clock_source = LCDC_CLK_EXTERNAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.interface_type = RGB18,
+		.clock_divider = 1,
+		.lcd_cfg = {
+			.name = "LB070WV1",
+			.xres = 800,
+			.yres = 480,
+			.left_margin = 40,
+			.right_margin = 160,
+			.hsync_len = 8,
+			.upper_margin = 63,
+			.lower_margin = 80,
+			.vsync_len = 1,
+			.sync = 0, /* hsync and vsync are active low */
+		},
+		.board_cfg = {
+			.display_on = ap320_wvga_power_on,
+		},
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe941fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev		= {
+		.platform_data	= &lcdc_info,
+	},
+};
+
+static unsigned char camera_ncm03j_magic[] =
+{
+	0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
+	0x1D, 0x00, 0x1E, 0x8A, 0x21, 0x00, 0x33, 0x36,
+	0x36, 0x60, 0x37, 0x08, 0x3B, 0x31, 0x44, 0x0F,
+	0x46, 0xF0, 0x4B, 0x28, 0x4C, 0x21, 0x4D, 0x55,
+	0x4E, 0x1B, 0x4F, 0xC7, 0x50, 0xFC, 0x51, 0x12,
+	0x58, 0x02, 0x66, 0xC0, 0x67, 0x46, 0x6B, 0xA0,
+	0x6C, 0x34, 0x7E, 0x25, 0x7F, 0x25, 0x8D, 0x0F,
+	0x92, 0x40, 0x93, 0x04, 0x94, 0x26, 0x95, 0x0A,
+	0x99, 0x03, 0x9A, 0xF0, 0x9B, 0x14, 0x9D, 0x7A,
+	0xC5, 0x02, 0xD6, 0x07, 0x59, 0x00, 0x5A, 0x1A,
+	0x5B, 0x2A, 0x5C, 0x37, 0x5D, 0x42, 0x5E, 0x56,
+	0xC8, 0x00, 0xC9, 0x1A, 0xCA, 0x2A, 0xCB, 0x37,
+	0xCC, 0x42, 0xCD, 0x56, 0xCE, 0x00, 0xCF, 0x1A,
+	0xD0, 0x2A, 0xD1, 0x37, 0xD2, 0x42, 0xD3, 0x56,
+	0x5F, 0x68, 0x60, 0x87, 0x61, 0xA3, 0x62, 0xBC,
+	0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F,
+};
+
+static int camera_set_capture(struct soc_camera_platform_info *info,
+			      int enable)
+{
+	struct i2c_adapter *a = i2c_get_adapter(0);
+	struct i2c_msg msg;
+	int ret = 0;
+	int i;
+
+	if (!enable)
+		return 0; /* no disable for now */
+
+	for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) {
+		u_int8_t buf[8];
+
+		msg.addr = 0x6e;
+		msg.buf = buf;
+		msg.len = 2;
+		msg.flags = 0;
+
+		buf[0] = camera_ncm03j_magic[i];
+		buf[1] = camera_ncm03j_magic[i + 1];
+
+		ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
+	}
+
+	return ret;
+}
+
+static struct soc_camera_platform_info camera_info = {
+	.iface = 0,
+	.format_name = "UYVY",
+	.format_depth = 16,
+	.format = {
+		.pixelformat = V4L2_PIX_FMT_UYVY,
+		.colorspace = V4L2_COLORSPACE_SMPTE170M,
+		.width = 640,
+		.height = 480,
+	},
+	.bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+	.set_capture = camera_set_capture,
+};
+
+static struct platform_device camera_device = {
+	.name		= "soc_camera_platform",
+	.dev		= {
+		.platform_data	= &camera_info,
+	},
+};
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+	.flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+};
+
+static struct resource ceu_resources[] = {
+	[0] = {
+		.name	= "CEU",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 52,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu_device = {
+	.name		= "sh_mobile_ceu",
+	.num_resources	= ARRAY_SIZE(ceu_resources),
+	.resource	= ceu_resources,
+	.dev		= {
+		.platform_data	= &sh_mobile_ceu_info,
+	},
+};
+
+static struct platform_device *ap325rxa_devices[] __initdata = {
+	&smc9118_device,
+	&ap325rxa_nor_flash_device,
+	&lcdc_device,
+	&ceu_device,
+	&camera_device,
+};
+
+static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
+};
+
+static int __init ap325rxa_devices_setup(void)
+{
+	clk_always_enable("mstp200"); /* LCDC */
+	clk_always_enable("mstp203"); /* CEU */
+
+	platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);
+
+	i2c_register_board_info(0, ap325rxa_i2c_devices,
+				ARRAY_SIZE(ap325rxa_i2c_devices));
+ 
+	return platform_add_devices(ap325rxa_devices,
+				ARRAY_SIZE(ap325rxa_devices));
+}
+device_initcall(ap325rxa_devices_setup);
+
+static void __init ap325rxa_setup(char **cmdline_p)
+{
+	/* LCDC configuration */
+	ctrl_outw(ctrl_inw(PORT_PHCR) & ~0xffff, PORT_PHCR);
+	ctrl_outw(ctrl_inw(PORT_PLCR) & ~0xffff, PORT_PLCR);
+	ctrl_outw(ctrl_inw(PORT_PMCR) & ~0xffff, PORT_PMCR);
+	ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x03ff, PORT_PRCR);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01C0, PORT_HIZCRA);
+
+	/* CEU */
+	ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
+	ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x0003, PORT_PSELD);
+	ctrl_outw((ctrl_inw(PORT_PZCR) & ~0xff00) | 0x5500, PORT_PZCR);
+	ctrl_outb((ctrl_inb(PORT_PZDR) & ~0xf0) | 0x20, PORT_PZDR);
+}
+
+static struct sh_machine_vector mv_ap325rxa __initmv = {
+	.mv_name = "AP-325RXA",
+	.mv_setup = ap325rxa_setup,
+};
diff --git a/arch/sh/boards/renesas/migor/Kconfig b/arch/sh/boards/renesas/migor/Kconfig
new file mode 100644
index 0000000..a7b3b72
--- /dev/null
+++ b/arch/sh/boards/renesas/migor/Kconfig
@@ -0,0 +1,15 @@
+if SH_MIGOR
+
+choice
+	prompt "Migo-R LCD Panel Board Selection"
+	default SH_MIGOR_QVGA
+
+config SH_MIGOR_QVGA
+	bool "QVGA (320x240)"
+
+config SH_MIGOR_RTA_WVGA
+	bool "RTA WVGA (800x480)"
+
+endchoice
+
+endif
diff --git a/arch/sh/boards/renesas/migor/Makefile b/arch/sh/boards/renesas/migor/Makefile
index 7703756..5f231dd 100644
--- a/arch/sh/boards/renesas/migor/Makefile
+++ b/arch/sh/boards/renesas/migor/Makefile
@@ -1 +1,2 @@
 obj-y	 := setup.o
+obj-$(CONFIG_SH_MIGOR_QVGA)	+=  lcd_qvga.o
diff --git a/arch/sh/boards/renesas/migor/lcd_qvga.c b/arch/sh/boards/renesas/migor/lcd_qvga.c
new file mode 100644
index 0000000..6e96095
--- /dev/null
+++ b/arch/sh/boards/renesas/migor/lcd_qvga.c
@@ -0,0 +1,165 @@
+/*
+ * Support for SuperH MigoR Quarter VGA LCD Panel
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd.
+ * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>,
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/sh_mobile_lcdc.h>
+#include <asm/migor.h>
+
+/* LCD Module is a PH240320T according to board schematics. This module
+ * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?)
+ * Driver IC. This IC is connected to the SH7722 built-in LCDC using a
+ * SYS-80 interface configured in 16 bit mode.
+ *
+ * Index 0: "Device Code Read" returns 0x1505.
+ */
+
+static void reset_lcd_module(void)
+{
+	ctrl_outb(ctrl_inb(PORT_PHDR) & ~0x04, PORT_PHDR);
+	mdelay(2);
+	ctrl_outb(ctrl_inb(PORT_PHDR) | 0x04, PORT_PHDR);
+	mdelay(1);
+}
+
+/* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */
+
+static unsigned long adjust_reg18(unsigned short data)
+{
+	unsigned long tmp1, tmp2;
+
+	tmp1 = (data<<1 | 0x00000001) & 0x000001FF;
+	tmp2 = (data<<2 | 0x00000200) & 0x0003FE00;
+	return tmp1 | tmp2;
+}
+
+static void write_reg(void *sys_ops_handle,
+		       struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+		       unsigned short reg, unsigned short data)
+{
+	sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data));
+}
+
+static void write_reg16(void *sys_ops_handle,
+			struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+			unsigned short reg, unsigned short data)
+{
+	sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
+	sys_ops->write_data(sys_ops_handle, adjust_reg18(data));
+}
+
+static unsigned long read_reg16(void *sys_ops_handle,
+				struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+				unsigned short reg)
+{
+	unsigned long data;
+
+	sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
+	data = sys_ops->read_data(sys_ops_handle);
+	return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00);
+}
+
+static void migor_lcd_qvga_seq(void *sys_ops_handle,
+			       struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+			       unsigned short const *data, int no_data)
+{
+	int i;
+
+	for (i = 0; i < no_data; i += 2)
+		write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]);
+}
+
+static const unsigned short sync_data[] = {
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+};
+
+static const unsigned short magic0_data[] = {
+	0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001,
+	0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116,
+	0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8,
+};
+
+static const unsigned short magic1_data[] = {
+	0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202,
+	0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303,
+	0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102,
+	0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300,
+	0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000,
+	0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000,
+	0x0015, 0x8000,
+};
+
+static const unsigned short magic2_data[] = {
+	0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021,
+};
+
+static const unsigned short magic3_data[] = {
+	0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061,
+};
+
+int migor_lcd_qvga_setup(void *board_data, void *sohandle,
+			 struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	unsigned long xres = 320;
+	unsigned long yres = 240;
+	int k;
+
+	reset_lcd_module();
+	migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
+
+	if (read_reg16(sohandle, so, 0) != 0x1505)
+		return -ENODEV;
+
+	pr_info("Migo-R QVGA LCD Module detected.\n");
+
+	migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
+	write_reg16(sohandle, so, 0x00A4, 0x0001);
+	mdelay(10);
+
+	migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data));
+	mdelay(100);
+
+	migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data));
+	write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1));
+	write_reg16(sohandle, so, 0x0051, 0x00ef);
+	write_reg16(sohandle, so, 0x0052, 0x0000);
+	write_reg16(sohandle, so, 0x0053, xres - 1);
+
+	migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data));
+	mdelay(10);
+
+	migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data));
+	mdelay(40);
+
+	/* clear GRAM to avoid displaying garbage */
+
+	write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */
+	write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */
+
+	for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */
+		write_reg16(sohandle, so, 0x0022, 0x0000);
+
+	write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */
+	write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */
+	write_reg16(sohandle, so, 0x0007, 0x0173);
+	mdelay(40);
+
+	/* enable display */
+	write_reg(sohandle, so, 0x00, 0x22);
+	mdelay(100);
+	return 0;
+}
diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c
index 963c993..7bd365a 100644
--- a/arch/sh/boards/renesas/migor/setup.c
+++ b/arch/sh/boards/renesas/migor/setup.c
@@ -15,9 +15,15 @@
 #include <linux/mtd/nand.h>
 #include <linux/i2c.h>
 #include <linux/smc91x.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <media/soc_camera_platform.h>
+#include <media/sh_mobile_ceu.h>
+#include <asm/clock.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
 #include <asm/sh_keysc.h>
+#include <asm/sh_mobile_lcdc.h>
 #include <asm/migor.h>
 
 /* Address     IRQ  Size  Bus  Description
@@ -198,14 +204,237 @@ static struct platform_device migor_nand_flash_device = {
 	}
 };
 
+static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA
+	.clock_source = LCDC_CLK_BUS,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.interface_type = RGB16,
+		.clock_divider = 2,
+		.lcd_cfg = {
+			.name = "LB070WV1",
+			.xres = 800,
+			.yres = 480,
+			.left_margin = 64,
+			.right_margin = 16,
+			.hsync_len = 120,
+			.upper_margin = 1,
+			.lower_margin = 17,
+			.vsync_len = 2,
+			.sync = 0,
+		},
+	}
+#endif
+#ifdef CONFIG_SH_MIGOR_QVGA
+	.clock_source = LCDC_CLK_PERIPHERAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.interface_type = SYS16A,
+		.clock_divider = 10,
+		.lcd_cfg = {
+			.name = "PH240320T",
+			.xres = 320,
+			.yres = 240,
+			.left_margin = 0,
+			.right_margin = 16,
+			.hsync_len = 8,
+			.upper_margin = 1,
+			.lower_margin = 17,
+			.vsync_len = 2,
+			.sync = FB_SYNC_HOR_HIGH_ACT,
+		},
+		.board_cfg = {
+			.setup_sys = migor_lcd_qvga_setup,
+		},
+		.sys_bus_cfg = {
+			.ldmt2r = 0x06000a09,
+			.ldmt3r = 0x180e3418,
+		},
+	}
+#endif
+};
+
+static struct resource migor_lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe941fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device migor_lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(migor_lcdc_resources),
+	.resource	= migor_lcdc_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_lcdc_info,
+	},
+};
+
+static struct clk *camera_clk;
+
+static void camera_power_on(void)
+{
+	unsigned char value;
+
+	camera_clk = clk_get(NULL, "video_clk");
+	clk_set_rate(camera_clk, 24000000);
+	clk_enable(camera_clk);	/* start VIO_CKO */
+
+	mdelay(10);
+	value = ctrl_inb(PORT_PTDR);
+	value &= ~0x09;
+#ifndef CONFIG_SH_MIGOR_RTA_WVGA
+	value |= 0x01;
+#endif
+	ctrl_outb(value, PORT_PTDR);
+	mdelay(10);
+
+	ctrl_outb(value | 8, PORT_PTDR);
+}
+
+static void camera_power_off(void)
+{
+	clk_disable(camera_clk); /* stop VIO_CKO */
+	clk_put(camera_clk);
+
+	ctrl_outb(ctrl_inb(PORT_PTDR) & ~0x08, PORT_PTDR);
+}
+
+static unsigned char camera_ov772x_magic[] =
+{
+	0x09, 0x01, 0x0c, 0x10, 0x0d, 0x41, 0x0e, 0x01,
+	0x12, 0x00, 0x13, 0x8F, 0x14, 0x4A, 0x15, 0x00,
+	0x16, 0x00, 0x17, 0x23, 0x18, 0xa0, 0x19, 0x07,
+	0x1a, 0xf0, 0x1b, 0x40, 0x1f, 0x00, 0x20, 0x10,
+	0x22, 0xff, 0x23, 0x01, 0x28, 0x00, 0x29, 0xa0,
+	0x2a, 0x00, 0x2b, 0x00, 0x2c, 0xf0, 0x2d, 0x00,
+	0x2e, 0x00, 0x30, 0x80, 0x31, 0x60, 0x32, 0x00,
+	0x33, 0x00, 0x34, 0x00, 0x3d, 0x80, 0x3e, 0xe2,
+	0x3f, 0x1f, 0x42, 0x80, 0x43, 0x80, 0x44, 0x80,
+	0x45, 0x80, 0x46, 0x00, 0x47, 0x00, 0x48, 0x00,
+	0x49, 0x50, 0x4a, 0x30, 0x4b, 0x50, 0x4c, 0x50,
+	0x4d, 0x00, 0x4e, 0xef, 0x4f, 0x10, 0x50, 0x60,
+	0x51, 0x00, 0x52, 0x00, 0x53, 0x24, 0x54, 0x7a,
+	0x55, 0xfc, 0x62, 0xff, 0x63, 0xf0, 0x64, 0x1f,
+	0x65, 0x00, 0x66, 0x10, 0x67, 0x00, 0x68, 0x00,
+	0x69, 0x5c, 0x6a, 0x11, 0x6b, 0xa2, 0x6c, 0x01,
+	0x6d, 0x50, 0x6e, 0x80, 0x6f, 0x80, 0x70, 0x0f,
+	0x71, 0x00, 0x72, 0x00, 0x73, 0x0f, 0x74, 0x0f,
+	0x75, 0xff, 0x78, 0x10, 0x79, 0x70, 0x7a, 0x70,
+	0x7b, 0xf0, 0x7c, 0xf0, 0x7d, 0xf0, 0x7e, 0x0e,
+	0x7f, 0x1a, 0x80, 0x31, 0x81, 0x5a, 0x82, 0x69,
+	0x83, 0x75, 0x84, 0x7e, 0x85, 0x88, 0x86, 0x8f,
+	0x87, 0x96, 0x88, 0xa3, 0x89, 0xaf, 0x8a, 0xc4,
+	0x8b, 0xd7, 0x8c, 0xe8, 0x8d, 0x20, 0x8e, 0x00,
+	0x8f, 0x00, 0x90, 0x08, 0x91, 0x10, 0x92, 0x1f,
+	0x93, 0x01, 0x94, 0x2c, 0x95, 0x24, 0x96, 0x08,
+	0x97, 0x14, 0x98, 0x24, 0x99, 0x38, 0x9a, 0x9e,
+	0x9b, 0x00, 0x9c, 0x40, 0x9e, 0x11, 0x9f, 0x02,
+	0xa0, 0x00, 0xa1, 0x40, 0xa2, 0x40, 0xa3, 0x06,
+	0xa4, 0x00, 0xa6, 0x00, 0xa7, 0x40, 0xa8, 0x40,
+	0xa9, 0x80, 0xaa, 0x80, 0xab, 0x06, 0xac, 0xff,
+	0x12, 0x06, 0x64, 0x3f, 0x12, 0x46, 0x17, 0x3f,
+	0x18, 0x50, 0x19, 0x03, 0x1a, 0x78, 0x29, 0x50,
+	0x2c, 0x78,
+};
+
+static int ov772x_set_capture(struct soc_camera_platform_info *info,
+			      int enable)
+{
+	struct i2c_adapter *a = i2c_get_adapter(0);
+	struct i2c_msg msg;
+	int ret = 0;
+	int i;
+
+	if (!enable)
+		return 0; /* camera_power_off() is enough */
+
+	for (i = 0; i < ARRAY_SIZE(camera_ov772x_magic); i += 2) {
+		u_int8_t buf[8];
+
+		msg.addr = 0x21;
+		msg.buf = buf;
+		msg.len = 2;
+		msg.flags = 0;
+
+		buf[0] = camera_ov772x_magic[i];
+		buf[1] = camera_ov772x_magic[i + 1];
+
+		ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
+	}
+
+	return ret;
+}
+
+static struct soc_camera_platform_info ov772x_info = {
+	.iface = 0,
+	.format_name = "RGB565",
+	.format_depth = 16,
+	.format = {
+		.pixelformat = V4L2_PIX_FMT_RGB565,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.width = 320,
+		.height = 240,
+	},
+	.bus_param =  SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+	.set_capture = ov772x_set_capture,
+};
+
+static struct platform_device migor_camera_device = {
+	.name		= "soc_camera_platform",
+	.dev	= {
+		.platform_data	= &ov772x_info,
+	},
+};
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+	.flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \
+	| SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH,
+	.enable_camera = camera_power_on,
+	.disable_camera = camera_power_off,
+};
+
+static struct resource migor_ceu_resources[] = {
+	[0] = {
+		.name	= "CEU",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 52,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device migor_ceu_device = {
+	.name		= "sh_mobile_ceu",
+	.num_resources	= ARRAY_SIZE(migor_ceu_resources),
+	.resource	= migor_ceu_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu_info,
+	},
+};
+
 static struct platform_device *migor_devices[] __initdata = {
 	&smc91x_eth_device,
 	&sh_keysc_device,
+	&migor_lcdc_device,
+	&migor_ceu_device,
+	&migor_camera_device,
 	&migor_nor_flash_device,
 	&migor_nand_flash_device,
 };
 
-static struct i2c_board_info __initdata migor_i2c_devices[] = {
+static struct i2c_board_info migor_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("rs5c372b", 0x32),
 	},
@@ -217,6 +446,12 @@ static struct i2c_board_info __initdata migor_i2c_devices[] = {
 
 static int __init migor_devices_setup(void)
 {
+	clk_always_enable("mstp214"); /* KEYSC */
+	clk_always_enable("mstp200"); /* LCDC */
+	clk_always_enable("mstp203"); /* CEU */
+
+	platform_resource_setup_memory(&migor_ceu_device, "ceu", 4 << 20);
+
 	i2c_register_board_info(0, migor_i2c_devices,
 				ARRAY_SIZE(migor_i2c_devices));
  
@@ -235,20 +470,51 @@ static void __init migor_setup(char **cmdline_p)
 	ctrl_outw(ctrl_inw(PORT_PSELA) & ~0x4100, PORT_PSELA);
 	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
 	ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
-	ctrl_outl(ctrl_inl(MSTPCR2) & ~0x00004000, MSTPCR2);
 
 	/* NAND Flash */
 	ctrl_outw(ctrl_inw(PORT_PXCR) & 0x0fff, PORT_PXCR);
 	ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x00000600) | 0x00000200,
 		  BSC_CS6ABCR);
 
-	/* I2C */
-	ctrl_outl(ctrl_inl(MSTPCR1) & ~0x00000200, MSTPCR1);
-
 	/* Touch Panel - Enable IRQ6 */
 	ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR);
 	ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA);
 	ctrl_outw((ctrl_inw(PORT_HIZCRC) & ~0x4000), PORT_HIZCRC);
+
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA
+	/* LCDC - WVGA - Enable RGB Interface signals */
+	ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR);
+	ctrl_outw(0x0000, PORT_PHCR);
+	ctrl_outw(0x0000, PORT_PLCR);
+	ctrl_outw(0x0000, PORT_PMCR);
+	ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x000f, PORT_PRCR);
+	ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x000d) | 0x0400, PORT_PSELD);
+	ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0100, PORT_MSELCRB);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA);
+#endif
+#ifdef CONFIG_SH_MIGOR_QVGA
+	/* LCDC - QVGA - Enable SYS Interface signals */
+	ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR);
+	ctrl_outw((ctrl_inw(PORT_PHCR) & ~0xcfff) | 0x0010, PORT_PHCR);
+	ctrl_outw(0x0000, PORT_PLCR);
+	ctrl_outw(0x0000, PORT_PMCR);
+	ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x030f, PORT_PRCR);
+	ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x0001) | 0x0420, PORT_PSELD);
+	ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x0100, PORT_MSELCRB);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA);
+#endif
+
+	/* CEU */
+	ctrl_outw((ctrl_inw(PORT_PTCR) & ~0x03c3) | 0x0051, PORT_PTCR);
+	ctrl_outw(ctrl_inw(PORT_PUCR) & ~0x03ff, PORT_PUCR);
+	ctrl_outw(ctrl_inw(PORT_PVCR) & ~0x03ff, PORT_PVCR);
+	ctrl_outw(ctrl_inw(PORT_PWCR) & ~0x3c00, PORT_PWCR);
+	ctrl_outw(ctrl_inw(PORT_PSELC) | 0x0001, PORT_PSELC);
+	ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x2000, PORT_PSELD);
+	ctrl_outw(ctrl_inw(PORT_PSELE) | 0x000f, PORT_PSELE);
+	ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x2200, PORT_MSELCRB);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x0a00, PORT_HIZCRA);
+	ctrl_outw(ctrl_inw(PORT_HIZCRB) & ~0x0003, PORT_HIZCRB);
 }
 
 static struct sh_machine_vector mv_migor __initmv = {
diff --git a/arch/sh/boards/renesas/rsk7203/Makefile b/arch/sh/boards/renesas/rsk7203/Makefile
new file mode 100644
index 0000000..f663768
--- /dev/null
+++ b/arch/sh/boards/renesas/rsk7203/Makefile
@@ -0,0 +1 @@
+obj-y	:= setup.o
diff --git a/arch/sh/boards/renesas/rsk7203/setup.c b/arch/sh/boards/renesas/rsk7203/setup.c
new file mode 100644
index 0000000..0bbda04
--- /dev/null
+++ b/arch/sh/boards/renesas/rsk7203/setup.c
@@ -0,0 +1,126 @@
+/*
+ * Renesas Technology Europe RSK+ 7203 Support.
+ *
+ * Copyright (C) 2008 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/map.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+static struct resource smc911x_resources[] = {
+	[0] = {
+		.start		= 0x24000000,
+		.end		= 0x24000000 + 0x100,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 64,
+		.end		= 64,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc911x_device = {
+	.name		= "smc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc911x_resources),
+	.resource	= smc911x_resources,
+};
+
+static const char *probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition *parsed_partitions;
+
+static struct mtd_partition rsk7203_partitions[] = {
+	{
+		.name		= "Bootloader",
+		.offset		= 0x00000000,
+		.size		= 0x00040000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 0x001c0000,
+	}, {
+		.name		= "Flash_FS",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct physmap_flash_data flash_data = {
+	.width		= 2,
+};
+
+static struct resource flash_resource = {
+	.start		= 0x20000000,
+	.end		= 0x20400000,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &flash_resource,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data = &flash_data,
+	},
+};
+
+static struct mtd_info *flash_mtd;
+
+static struct map_info rsk7203_flash_map = {
+	.name		= "RSK+ Flash",
+	.size		= 0x400000,
+	.bankwidth	= 2,
+};
+
+static void __init set_mtd_partitions(void)
+{
+	int nr_parts = 0;
+
+	simple_map_init(&rsk7203_flash_map);
+	flash_mtd = do_map_probe("cfi_probe", &rsk7203_flash_map);
+	nr_parts = parse_mtd_partitions(flash_mtd, probes,
+					&parsed_partitions, 0);
+	/* If there is no partition table, used the hard coded table */
+	if (nr_parts <= 0) {
+		flash_data.parts = rsk7203_partitions;
+		flash_data.nr_parts = ARRAY_SIZE(rsk7203_partitions);
+	} else {
+		flash_data.nr_parts = nr_parts;
+		flash_data.parts = parsed_partitions;
+	}
+}
+
+
+static struct platform_device *rsk7203_devices[] __initdata = {
+	&smc911x_device,
+	&flash_device,
+};
+
+static int __init rsk7203_devices_setup(void)
+{
+	set_mtd_partitions();
+	return platform_add_devices(rsk7203_devices,
+				    ARRAY_SIZE(rsk7203_devices));
+}
+device_initcall(rsk7203_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_rsk7203 __initmv = {
+	.mv_name        = "RSK+7203",
+};
diff --git a/arch/sh/boards/renesas/sh7763rdp/Makefile b/arch/sh/boards/renesas/sh7763rdp/Makefile
new file mode 100644
index 0000000..f6c0b55
--- /dev/null
+++ b/arch/sh/boards/renesas/sh7763rdp/Makefile
@@ -0,0 +1 @@
+obj-y    := setup.o irq.o
diff --git a/arch/sh/boards/renesas/sh7763rdp/irq.c b/arch/sh/boards/renesas/sh7763rdp/irq.c
new file mode 100644
index 0000000..fd850ba
--- /dev/null
+++ b/arch/sh/boards/renesas/sh7763rdp/irq.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/sh/boards/renesas/sh7763rdp/irq.c
+ *
+ * Renesas Solutions SH7763RDP Support.
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008  Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/sh7763rdp.h>
+
+#define INTC_BASE		(0xFFD00000)
+#define INTC_INT2PRI7   (INTC_BASE+0x4001C)
+#define INTC_INT2MSKCR	(INTC_BASE+0x4003C)
+#define INTC_INT2MSKCR1	(INTC_BASE+0x400D4)
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_sh7763rdp_IRQ(void)
+{
+	/* GPIO enabled */
+	ctrl_outl(1 << 25, INTC_INT2MSKCR);
+
+	/* enable GPIO interrupts */
+	ctrl_outl((ctrl_inl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000,
+		  INTC_INT2PRI7);
+
+	/* USBH enabled */
+	ctrl_outl(1 << 17, INTC_INT2MSKCR1);
+
+	/* GETHER enabled */
+	ctrl_outl(1 << 16, INTC_INT2MSKCR1);
+
+	/* DMAC enabled */
+	ctrl_outl(1 << 8, INTC_INT2MSKCR);
+}
diff --git a/arch/sh/boards/renesas/sh7763rdp/setup.c b/arch/sh/boards/renesas/sh7763rdp/setup.c
new file mode 100644
index 0000000..925f16a
--- /dev/null
+++ b/arch/sh/boards/renesas/sh7763rdp/setup.c
@@ -0,0 +1,128 @@
+/*
+ * linux/arch/sh/boards/renesas/sh7763rdp/setup.c
+ *
+ * Renesas Solutions sh7763rdp board
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/mtd/physmap.h>
+#include <asm/io.h>
+#include <asm/sh7763rdp.h>
+
+/* NOR Flash */
+static struct mtd_partition sh7763rdp_nor_flash_partitions[] = {
+	{
+		.name = "U-Boot",
+		.offset = 0,
+		.size = (2 * 128 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		.name = "Linux-Kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (20 * 128 * 1024),
+	}, {
+		.name = "Root Filesystem",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data sh7763rdp_nor_flash_data = {
+	.width = 2,
+	.parts = sh7763rdp_nor_flash_partitions,
+	.nr_parts = ARRAY_SIZE(sh7763rdp_nor_flash_partitions),
+};
+
+static struct resource sh7763rdp_nor_flash_resources[] = {
+	[0] = {
+		.name = "NOR Flash",
+		.start = 0,
+		.end = (64 * 1024 * 1024),
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device sh7763rdp_nor_flash_device = {
+	.name = "physmap-flash",
+	.resource = sh7763rdp_nor_flash_resources,
+	.num_resources = ARRAY_SIZE(sh7763rdp_nor_flash_resources),
+	.dev = {
+		.platform_data = &sh7763rdp_nor_flash_data,
+	},
+};
+
+static struct platform_device *sh7763rdp_devices[] __initdata = {
+	&sh7763rdp_nor_flash_device,
+};
+
+static int __init sh7763rdp_devices_setup(void)
+{
+	return platform_add_devices(sh7763rdp_devices,
+				    ARRAY_SIZE(sh7763rdp_devices));
+}
+__initcall(sh7763rdp_devices_setup);
+
+static void __init sh7763rdp_setup(char **cmdline_p)
+{
+	/* Board version check */
+	if (ctrl_inw(CPLD_BOARD_ID_ERV_REG) == 0xECB1)
+		printk(KERN_INFO "RTE Standard Configuration\n");
+	else
+		printk(KERN_INFO "RTA Standard Configuration\n");
+
+	/* USB pin select bits (clear bit 5-2 to 0) */
+	ctrl_outw((ctrl_inw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2);
+	/* USBH setup port I controls to other (clear bits 4-9 to 0) */
+	ctrl_outw(ctrl_inw(PORT_PICR) & 0xFC0F, PORT_PICR);
+
+	/* Select USB Host controller */
+	ctrl_outw(0x00, USB_USBHSC);
+
+	/* For LCD */
+	/* set PTJ7-1, bits 15-2 of PJCR to 0 */
+	ctrl_outw(ctrl_inw(PORT_PJCR) & 0x0003, PORT_PJCR);
+	/* set PTI5, bits 11-10 of PICR to 0 */
+	ctrl_outw(ctrl_inw(PORT_PICR) & 0xF3FF, PORT_PICR);
+	ctrl_outw(0, PORT_PKCR);
+	ctrl_outw(0, PORT_PLCR);
+	/* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */
+	ctrl_outw((ctrl_inw(PORT_PSEL2) & 0x00C0), PORT_PSEL2);
+	/* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */
+	ctrl_outw((ctrl_inw(PORT_PSEL3) & 0x0700), PORT_PSEL3);
+
+	/* For HAC */
+	/* bit3-0  0100:HAC & SSI1 enable */
+	ctrl_outw((ctrl_inw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1);
+	/* bit14      1:SSI_HAC_CLK enable */
+	ctrl_outw(ctrl_inw(PORT_PSEL4) | 0x4000, PORT_PSEL4);
+
+	/* SH-Ether */
+	ctrl_outw((ctrl_inw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1);
+	ctrl_outw(0x0, PORT_PFCR);
+	ctrl_outw(0x0, PORT_PFCR);
+	ctrl_outw(0x0, PORT_PFCR);
+
+	/* MMC */
+	/*selects SCIF and MMC other functions */
+	ctrl_outw(0x0001, PORT_PSEL0);
+	/* MMC clock operates */
+	ctrl_outl(ctrl_inl(MSTPCR1) & ~0x8, MSTPCR1);
+	ctrl_outw(ctrl_inw(PORT_PACR) & ~0x3000, PORT_PACR);
+	ctrl_outw(ctrl_inw(PORT_PCCR) & ~0xCFC3, PORT_PCCR);
+}
+
+static struct sh_machine_vector mv_sh7763rdp __initmv = {
+	.mv_name = "sh7763drp",
+	.mv_setup = sh7763rdp_setup,
+	.mv_nr_irqs = 112,
+	.mv_init_irq = init_sh7763rdp_IRQ,
+};
diff --git a/arch/sh/boards/renesas/sh7785lcr/Makefile b/arch/sh/boards/renesas/sh7785lcr/Makefile
new file mode 100644
index 0000000..7703756
--- /dev/null
+++ b/arch/sh/boards/renesas/sh7785lcr/Makefile
@@ -0,0 +1 @@
+obj-y	 := setup.o
diff --git a/arch/sh/boards/renesas/sh7785lcr/setup.c b/arch/sh/boards/renesas/sh7785lcr/setup.c
new file mode 100644
index 0000000..b95d674
--- /dev/null
+++ b/arch/sh/boards/renesas/sh7785lcr/setup.c
@@ -0,0 +1,302 @@
+/*
+ * Renesas Technology Corp. R0P7785LC0011RL Support.
+ *
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+#include <linux/fb.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c-pca-platform.h>
+#include <linux/i2c-algo-pca.h>
+#include <asm/heartbeat.h>
+#include <asm/sh7785lcr.h>
+
+/*
+ * NOTE: This board has 2 physical memory maps.
+ *	 Please look at include/asm-sh/sh7785lcr.h or hardware manual.
+ */
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PLD_LEDCR,
+		.end	= PLD_LEDCR,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 8,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 4 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 4,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= NOR_FLASH_ADDR,
+		.end	= NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+static struct resource r8a66597_usb_host_resources[] = {
+	[0] = {
+		.name	= "r8a66597_hcd",
+		.start	= R8A66597_ADDR,
+		.end	= R8A66597_ADDR + R8A66597_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "r8a66597_hcd",
+		.start	= 2,
+		.end	= 2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device r8a66597_usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
+	.resource	= r8a66597_usb_host_resources,
+};
+
+static struct resource sm501_resources[] = {
+	[0]	= {
+		.start	= SM107_MEM_ADDR,
+		.end	= SM107_MEM_ADDR + SM107_MEM_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1]	= {
+		.start	= SM107_REG_ADDR,
+		.end	= SM107_REG_ADDR + SM107_REG_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2]	= {
+		.start	= 10,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct fb_videomode sm501_default_mode_crt = {
+	.pixclock	= 35714,	/* 28MHz */
+	.xres		= 640,
+	.yres		= 480,
+	.left_margin	= 105,
+	.right_margin	= 16,
+	.upper_margin	= 33,
+	.lower_margin	= 10,
+	.hsync_len	= 39,
+	.vsync_len	= 2,
+	.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct fb_videomode sm501_default_mode_pnl = {
+	.pixclock	= 40000,	/* 25MHz */
+	.xres		= 640,
+	.yres		= 480,
+	.left_margin	= 2,
+	.right_margin	= 16,
+	.upper_margin	= 33,
+	.lower_margin	= 10,
+	.hsync_len	= 39,
+	.vsync_len	= 2,
+	.sync		= 0,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
+	.def_bpp	= 16,
+	.def_mode	= &sm501_default_mode_pnl,
+	.flags		= SM501FB_FLAG_USE_INIT_MODE |
+			  SM501FB_FLAG_USE_HWCURSOR |
+			  SM501FB_FLAG_USE_HWACCEL |
+			  SM501FB_FLAG_DISABLE_AT_EXIT |
+			  SM501FB_FLAG_PANEL_NO_VBIASEN,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
+	.def_bpp	= 16,
+	.def_mode	= &sm501_default_mode_crt,
+	.flags		= SM501FB_FLAG_USE_INIT_MODE |
+			  SM501FB_FLAG_USE_HWCURSOR |
+			  SM501FB_FLAG_USE_HWACCEL |
+			  SM501FB_FLAG_DISABLE_AT_EXIT,
+};
+
+static struct sm501_platdata_fb sm501_fb_pdata = {
+	.fb_route	= SM501_FB_OWN,
+	.fb_crt		= &sm501_pdata_fbsub_crt,
+	.fb_pnl		= &sm501_pdata_fbsub_pnl,
+};
+
+static struct sm501_initdata sm501_initdata = {
+	.gpio_high	= {
+		.set	= 0x00001fe0,
+		.mask	= 0x0,
+	},
+	.devices	= 0,
+	.mclk		= 84 * 1000000,
+	.m1xclk		= 112 * 1000000,
+};
+
+static struct sm501_platdata sm501_platform_data = {
+	.init		= &sm501_initdata,
+	.fb		= &sm501_fb_pdata,
+};
+
+static struct platform_device sm501_device = {
+	.name		= "sm501",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &sm501_platform_data,
+	},
+	.num_resources	= ARRAY_SIZE(sm501_resources),
+	.resource	= sm501_resources,
+};
+
+static struct resource i2c_resources[] = {
+	[0] = {
+		.start	= PCA9564_ADDR,
+		.end	= PCA9564_ADDR + PCA9564_SIZE - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+	},
+	[1] = {
+		.start	= 12,
+		.end	= 12,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct i2c_pca9564_pf_platform_data i2c_platform_data = {
+	.gpio			= 0,
+	.i2c_clock_speed	= I2C_PCA_CON_330kHz,
+	.timeout		= 100,
+};
+
+static struct platform_device i2c_device = {
+	.name		= "i2c-pca-platform",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &i2c_platform_data,
+	},
+	.num_resources	= ARRAY_SIZE(i2c_resources),
+	.resource	= i2c_resources,
+};
+
+static struct platform_device *sh7785lcr_devices[] __initdata = {
+	&heartbeat_device,
+	&nor_flash_device,
+	&r8a66597_usb_host_device,
+	&sm501_device,
+	&i2c_device,
+};
+
+static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("r2025sd", 0x32),
+	},
+};
+
+static int __init sh7785lcr_devices_setup(void)
+{
+	i2c_register_board_info(0, sh7785lcr_i2c_devices,
+				ARRAY_SIZE(sh7785lcr_i2c_devices));
+
+	return platform_add_devices(sh7785lcr_devices,
+				    ARRAY_SIZE(sh7785lcr_devices));
+}
+__initcall(sh7785lcr_devices_setup);
+
+/* Initialize IRQ setting */
+void __init init_sh7785lcr_IRQ(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ7654);
+	plat_irq_setup_pins(IRQ_MODE_IRQ3210);
+}
+
+static void sh7785lcr_power_off(void)
+{
+	ctrl_outb(0x01, P2SEGADDR(PLD_POFCR));
+}
+
+/* Initialize the board */
+static void __init sh7785lcr_setup(char **cmdline_p)
+{
+	void __iomem *sm501_reg;
+
+	printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n");
+
+	pm_power_off = sh7785lcr_power_off;
+
+	/* sm501 DRAM configuration */
+	sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
+	writel(0x000307c2, sm501_reg);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_sh7785lcr __initmv = {
+	.mv_name		= "SH7785LCR",
+	.mv_setup		= sh7785lcr_setup,
+	.mv_init_irq		= init_sh7785lcr_IRQ,
+};
+
diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/se/7343/irq.c
index 763f6de..1112e86 100644
--- a/arch/sh/boards/se/7343/irq.c
+++ b/arch/sh/boards/se/7343/irq.c
@@ -1,202 +1,80 @@
 /*
- * arch/sh/boards/se/7343/irq.c
+ * linux/arch/sh/boards/se/7343/irq.c
  *
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * Based on linux/arch/sh/boards/se/7722/irq.c
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
  */
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/interrupt.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/mach/se7343.h>
+#include <asm/se7343.h>
 
-static void
-disable_intreq_irq(unsigned int irq)
+static void disable_se7343_irq(unsigned int irq)
 {
-	int bit = irq - OFFCHIP_IRQ_BASE;
-	u16 val;
-
-	val = ctrl_inw(PA_CPLD_IMSK);
-	val |= 1 << bit;
-	ctrl_outw(val, PA_CPLD_IMSK);
+	unsigned int bit = irq - SE7343_FPGA_IRQ_BASE;
+	ctrl_outw(ctrl_inw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK);
 }
 
-static void
-enable_intreq_irq(unsigned int irq)
+static void enable_se7343_irq(unsigned int irq)
 {
-	int bit = irq - OFFCHIP_IRQ_BASE;
-	u16 val;
-
-	val = ctrl_inw(PA_CPLD_IMSK);
-	val &= ~(1 << bit);
-	ctrl_outw(val, PA_CPLD_IMSK);
+	unsigned int bit = irq - SE7343_FPGA_IRQ_BASE;
+	ctrl_outw(ctrl_inw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK);
 }
 
-static void
-mask_and_ack_intreq_irq(unsigned int irq)
-{
-	disable_intreq_irq(irq);
-}
-
-static unsigned int
-startup_intreq_irq(unsigned int irq)
-{
-	enable_intreq_irq(irq);
-	return 0;
-}
-
-static void
-shutdown_intreq_irq(unsigned int irq)
-{
-	disable_intreq_irq(irq);
-}
-
-static void
-end_intreq_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		enable_intreq_irq(irq);
-}
-
-static struct hw_interrupt_type intreq_irq_type = {
-	.typename = "FPGA-IRQ",
-	.startup = startup_intreq_irq,
-	.shutdown = shutdown_intreq_irq,
-	.enable = enable_intreq_irq,
-	.disable = disable_intreq_irq,
-	.ack = mask_and_ack_intreq_irq,
-	.end = end_intreq_irq
+static struct irq_chip se7343_irq_chip __read_mostly = {
+	.name           = "SE7343-FPGA",
+	.mask           = disable_se7343_irq,
+	.unmask         = enable_se7343_irq,
+	.mask_ack       = disable_se7343_irq,
 };
 
-static void
-make_intreq_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	irq_desc[irq].chip = &intreq_irq_type;
-	disable_intreq_irq(irq);
-}
-
-int
-shmse_irq_demux(int irq)
+static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
-	int bit;
-	volatile u16 val;
-
-	if (irq == IRQ5_IRQ) {
-		/* Read status Register */
-		val = ctrl_inw(PA_CPLD_ST);
-		bit = ffs(val);
-		if (bit != 0)
-			return OFFCHIP_IRQ_BASE + bit - 1;
+	unsigned short intv = ctrl_inw(PA_CPLD_ST);
+	struct irq_desc *ext_desc;
+	unsigned int ext_irq = SE7343_FPGA_IRQ_BASE;
+
+	intv &= (1 << SE7343_FPGA_IRQ_NR) - 1;
+
+	while (intv) {
+		if (intv & 1) {
+			ext_desc = irq_desc + ext_irq;
+			handle_level_irq(ext_irq, ext_desc);
+		}
+		intv >>= 1;
+		ext_irq++;
 	}
-	return irq;
 }
 
-/* IRQ5 is multiplexed between the following sources:
- * 1. PC Card socket
- * 2. Extension slot
- * 3. USB Controller
- * 4. Serial Controller
- *
- * We configure IRQ5 as a cascade IRQ.
- */
-static struct irqaction irq5 = {
-	.handler = no_action,
-	.mask = CPU_MASK_NONE,
-	.name = "IRQ5-cascade",
-};
-
-static struct ipr_data se7343_irq5_ipr_map[] = {
-	{ IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY },
-};
-static struct ipr_data se7343_siof0_vpu_ipr_map[] = {
-	{ SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
-	{ VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8 },
-};
-static struct ipr_data se7343_other_ipr_map[] = {
-	{ DMTE0_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE1_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
-	{ DMTE5_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
-
-	/* I2C block */
-	{ IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-	{ IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-	{ IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-	{ IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-
-	{ IIC1_ALI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-	{ IIC1_TACKI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-	{ IIC1_WAITI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-	{ IIC1_DTEI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-
-	/* SIOF */
-	{ SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
-
-	/* SIU */
-	{ SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY },
-
-	/* VIO interrupt */
-	{ CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-	{ BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-	{ VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-
-	/*MFI interrupt*/
-
-	{ MFI_IRQ, MFI_IPR_ADDR, MFI_IPR_POS, MFI_PRIORITY },
-
-	/* LCD controller */
-	{ LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY },
-};
-
 /*
  * Initialize IRQ setting
  */
-void __init
-init_7343se_IRQ(void)
+void __init init_7343se_IRQ(void)
 {
-	/* Setup Multiplexed interrupts */
-	ctrl_outw(8, PA_CPLD_MODESET);	/* Set all CPLD interrupts to active
-					 * low.
-					 */
-	/* Mask all CPLD controller interrupts */
-	ctrl_outw(0x0fff, PA_CPLD_IMSK);
-
-	/* PC Card interrupts */
-	make_intreq_irq(PC_IRQ0);
-	make_intreq_irq(PC_IRQ1);
-	make_intreq_irq(PC_IRQ2);
-	make_intreq_irq(PC_IRQ3);
-
-	/* Extension Slot Interrupts */
-	make_intreq_irq(EXT_IRQ0);
-	make_intreq_irq(EXT_IRQ1);
-	make_intreq_irq(EXT_IRQ2);
-	make_intreq_irq(EXT_IRQ3);
-
-	/* USB Controller interrupts */
-	make_intreq_irq(USB_IRQ0);
-	make_intreq_irq(USB_IRQ1);
-
-	/* Serial Controller interrupts */
-	make_intreq_irq(UART_IRQ0);
-	make_intreq_irq(UART_IRQ1);
-
-	/* Setup all external interrupts to be active low */
-	ctrl_outw(0xaaaa, INTC_ICR1);
-
-	make_ipr_irq(se7343_irq5_ipr_map, ARRAY_SIZE(se7343_irq5_ipr_map));
-
-	setup_irq(IRQ5_IRQ, &irq5);
-	/* Set port control to use IRQ5 */
-	*(u16 *)0xA4050108 &= ~0xc;
-
-	make_ipr_irq(se7343_siof0_vpu_ipr_map, ARRAY_SIZE(se7343_siof0_vpu_ipr_map));
-
-	ctrl_outb(0x0f, INTC_IMCR5);	/* enable SCIF IRQ */
-
-	make_ipr_irq(se7343_other_ipr_map, ARRAY_SIZE(se7343_other_ipr_map));
-
-	ctrl_outw(0x2000, PA_MRSHPC + 0x0c);	/* mrshpc irq enable */
+	int i;
+
+	ctrl_outw(0, PA_CPLD_IMSK);	/* disable all irqs */
+	ctrl_outw(0x2000, 0xb03fffec);	/* mrshpc irq enable */
+
+	for (i = 0; i < SE7343_FPGA_IRQ_NR; i++)
+		set_irq_chip_and_handler_name(SE7343_FPGA_IRQ_BASE + i,
+					      &se7343_irq_chip,
+					      handle_level_irq, "level");
+
+	set_irq_chained_handler(IRQ0_IRQ, se7343_irq_demux);
+	set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_chained_handler(IRQ1_IRQ, se7343_irq_demux);
+	set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_chained_handler(IRQ4_IRQ, se7343_irq_demux);
+	set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_chained_handler(IRQ5_IRQ, se7343_irq_demux);
+	set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW);
 }
diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c
index c9431b3..8ae718d 100644
--- a/arch/sh/boards/se/7343/setup.c
+++ b/arch/sh/boards/se/7343/setup.c
@@ -1,10 +1,11 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
 #include <asm/machvec.h>
 #include <asm/mach/se7343.h>
+#include <asm/heartbeat.h>
 #include <asm/irq.h>
-
-void init_7343se_IRQ(void);
+#include <asm/io.h>
 
 static struct resource smc91x_resources[] = {
 	[0] = {
@@ -17,8 +18,8 @@ static struct resource smc91x_resources[] = {
 		 * shared with other devices via externel
 		 * interrupt controller in FPGA...
 		 */
-		.start	= EXT_IRQ2,
-		.end	= EXT_IRQ2,
+		.start	= SMC_IRQ,
+		.end	= SMC_IRQ,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -38,16 +39,65 @@ static struct resource heartbeat_resources[] = {
 	},
 };
 
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 16,
+};
+
 static struct platform_device heartbeat_device = {
 	.name		= "heartbeat",
 	.id		= -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
 	.num_resources	= ARRAY_SIZE(heartbeat_resources),
 	.resource	= heartbeat_resources,
 };
 
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 128 * 1024,
+	},
+	{
+		.name		= "rootfs",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 31 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= 0x00000000,
+		.end	= 0x01ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
 static struct platform_device *sh7343se_platform_devices[] __initdata = {
 	&smc91x_device,
 	&heartbeat_device,
+	&nor_flash_device,
 };
 
 static int __init sh7343se_devices_setup(void)
@@ -55,10 +105,19 @@ static int __init sh7343se_devices_setup(void)
 	return platform_add_devices(sh7343se_platform_devices,
 				    ARRAY_SIZE(sh7343se_platform_devices));
 }
+device_initcall(sh7343se_devices_setup);
 
+/*
+ * Initialize the board
+ */
 static void __init sh7343se_setup(char **cmdline_p)
 {
-	device_initcall(sh7343se_devices_setup);
+	ctrl_outw(0xf900, FPGA_OUT);	/* FPGA */
+
+	ctrl_outw(0x0002, PORT_PECR);	/* PORT E 1 = IRQ5 */
+	ctrl_outw(0x0020, PORT_PSELD);
+
+	printk(KERN_INFO "MS7343CP01 Setup...done\n");
 }
 
 /*
@@ -90,5 +149,4 @@ static struct sh_machine_vector mv_7343se __initmv = {
 	.mv_outsl = sh7343se_outsl,
 
 	.mv_init_irq = init_7343se_IRQ,
-	.mv_irq_demux = shmse_irq_demux,
 };
diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/se/770x/io.c
index c455047..b1ec085 100644
--- a/arch/sh/boards/se/770x/io.c
+++ b/arch/sh/boards/se/770x/io.c
@@ -1,25 +1,13 @@
-/* $Id: io.c,v 1.7 2006/02/05 21:55:29 lethal Exp $
- *
- * linux/arch/sh/kernel/io_se.c
- *
+/*
  * Copyright (C) 2000  Kazumoto Kojima
  *
  * I/O routine for Hitachi SolutionEngine.
- *
  */
-
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <asm/io.h>
 #include <asm/se.h>
 
-/* SH pcmcia io window base, start and end.  */
-int sh_pcic_io_wbase = 0xb8400000;
-int sh_pcic_io_start;
-int sh_pcic_io_stop;
-int sh_pcic_io_type;
-int sh_pcic_io_dummy;
-
 /* MS7750 requires special versions of in*, out* routines, since
    PC-like io ports are located at upper half byte of 16-bit word which
    can be accessed only with 16-bit wide.  */
@@ -33,8 +21,6 @@ port2adr(unsigned int port)
 		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
 	else if (port >= 0x1000)
 		return (volatile __u16 *) (PA_83902 + (port << 1));
-	else if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		return (volatile __u16 *) (sh_pcic_io_wbase + (port &~ 1));
 	else
 		return (volatile __u16 *) (PA_SUPERIO + (port << 1));
 }
@@ -51,32 +37,27 @@ shifted_port(unsigned long port)
 
 unsigned char se_inb(unsigned long port)
 {
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		return *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); 
-	else if (shifted_port(port))
-		return (*port2adr(port) >> 8); 
+	if (shifted_port(port))
+		return (*port2adr(port) >> 8);
 	else
-		return (*port2adr(port))&0xff; 
+		return (*port2adr(port))&0xff;
 }
 
 unsigned char se_inb_p(unsigned long port)
 {
 	unsigned long v;
 
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		v = *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); 
-	else if (shifted_port(port))
-		v = (*port2adr(port) >> 8); 
+	if (shifted_port(port))
+		v = (*port2adr(port) >> 8);
 	else
-		v = (*port2adr(port))&0xff; 
+		v = (*port2adr(port))&0xff;
 	ctrl_delay();
 	return v;
 }
 
 unsigned short se_inw(unsigned long port)
 {
-	if (port >= 0x2000 ||
-	    (sh_pcic_io_start <= port && port <= sh_pcic_io_stop))
+	if (port >= 0x2000)
 		return *port2adr(port);
 	else
 		maybebadio(port);
@@ -91,9 +72,7 @@ unsigned int se_inl(unsigned long port)
 
 void se_outb(unsigned char value, unsigned long port)
 {
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		*(__u8 *)(sh_pcic_io_wbase + port) = value; 
-	else if (shifted_port(port))
+	if (shifted_port(port))
 		*(port2adr(port)) = value << 8;
 	else
 		*(port2adr(port)) = value;
@@ -101,9 +80,7 @@ void se_outb(unsigned char value, unsigned long port)
 
 void se_outb_p(unsigned char value, unsigned long port)
 {
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		*(__u8 *)(sh_pcic_io_wbase + port) = value; 
-	else if (shifted_port(port))
+	if (shifted_port(port))
 		*(port2adr(port)) = value << 8;
 	else
 		*(port2adr(port)) = value;
@@ -112,8 +89,7 @@ void se_outb_p(unsigned char value, unsigned long port)
 
 void se_outw(unsigned short value, unsigned long port)
 {
-	if (port >= 0x2000 ||
-	    (sh_pcic_io_start <= port && port <= sh_pcic_io_stop))
+	if (port >= 0x2000)
 		*port2adr(port) = value;
 	else
 		maybebadio(port);
@@ -129,11 +105,7 @@ void se_insb(unsigned long port, void *addr, unsigned long count)
 	volatile __u16 *p = port2adr(port);
 	__u8 *ap = addr;
 
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) {
-		volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + 0x40000 + port); 
-		while (count--)
-			*ap++ = *bp;
-	} else if (shifted_port(port)) {
+	if (shifted_port(port)) {
 		while (count--)
 			*ap++ = *p >> 8;
 	} else {
@@ -160,11 +132,7 @@ void se_outsb(unsigned long port, const void *addr, unsigned long count)
 	volatile __u16 *p = port2adr(port);
 	const __u8 *ap = addr;
 
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) {
-		volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + port); 
-		while (count--)
-			*bp = *ap++;
-	} else if (shifted_port(port)) {
+	if (shifted_port(port)) {
 		while (count--)
 			*p = *ap++ << 8;
 	} else {
@@ -177,6 +145,7 @@ void se_outsw(unsigned long port, const void *addr, unsigned long count)
 {
 	volatile __u16 *p = port2adr(port);
 	const __u16 *ap = addr;
+
 	while (count--)
 		*p = *ap++;
 }
diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c
index 318bc8a..cf4a5ba 100644
--- a/arch/sh/boards/se/770x/setup.c
+++ b/arch/sh/boards/se/770x/setup.c
@@ -14,8 +14,6 @@
 #include <asm/smc37c93x.h>
 #include <asm/heartbeat.h>
 
-void init_se_IRQ(void);
-
 /*
  * Configure the Super I/O chip
  */
@@ -73,7 +71,7 @@ static struct resource cf_ide_resources[] = {
 	},
 	[1] = {
 		.start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
-		.end    = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
+		.end    = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
 		.flags  = IORESOURCE_MEM,
 	},
 	[2] = {
@@ -115,9 +113,58 @@ static struct platform_device heartbeat_device = {
 	.resource	= heartbeat_resources,
 };
 
+/* SH771X Ethernet driver */
+static struct resource sh_eth0_resources[] = {
+	[0] = {
+		.start = SH_ETH0_BASE,
+		.end = SH_ETH0_BASE + 0x1B8,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = SH_ETH0_IRQ,
+		.end = SH_ETH0_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_eth0_device = {
+	.name = "sh-eth",
+	.id	= 0,
+	.dev = {
+		.platform_data = PHY_ID,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth0_resources),
+	.resource = sh_eth0_resources,
+};
+
+static struct resource sh_eth1_resources[] = {
+	[0] = {
+		.start = SH_ETH1_BASE,
+		.end = SH_ETH1_BASE + 0x1B8,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = SH_ETH1_IRQ,
+		.end = SH_ETH1_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_eth1_device = {
+	.name = "sh-eth",
+	.id	= 1,
+	.dev = {
+		.platform_data = PHY_ID,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth1_resources),
+	.resource = sh_eth1_resources,
+};
+
 static struct platform_device *se_devices[] __initdata = {
 	&heartbeat_device,
 	&cf_ide_device,
+	&sh_eth0_device,
+	&sh_eth1_device,
 };
 
 static int __init se_devices_setup(void)
diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c
index ede3957..6e228ea 100644
--- a/arch/sh/boards/se/7722/setup.c
+++ b/arch/sh/boards/se/7722/setup.c
@@ -16,6 +16,7 @@
 #include <linux/input.h>
 #include <linux/smc91x.h>
 #include <asm/machvec.h>
+#include <asm/clock.h>
 #include <asm/se7722.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
@@ -145,6 +146,8 @@ static struct platform_device *se7722_devices[] __initdata = {
 
 static int __init se7722_devices_setup(void)
 {
+	clk_always_enable("mstp214"); /* KEYSC */
+
 	return platform_add_devices(se7722_devices,
 		ARRAY_SIZE(se7722_devices));
 }
@@ -154,11 +157,6 @@ static void __init se7722_setup(char **cmdline_p)
 {
 	ctrl_outw(0x010D, FPGA_OUT);    /* FPGA */
 
-	ctrl_outl(0x00051001, MSTPCR0);
-	ctrl_outl(0x00000000, MSTPCR1);
-	/* KEYSC, VOU, BEU, CEU, VEU, VPU, LCDC, USB */
-	ctrl_outl(0xffffb7c0, MSTPCR2);
-
 	ctrl_outw(0x0000, PORT_PECR);   /* PORT E 1 = IRQ5 ,E 0 = BS */
 	ctrl_outw(0x1000, PORT_PJCR);   /* PORT J 1 = IRQ1,J 0 =IRQ0 */
 
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index 89b4086..8b37869 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -40,7 +40,7 @@ KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%08x" \
 KERNEL_ENTRY	:= $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_PAGE_OFFSET)  + \
 			$(CONFIG_MEMORY_START) + \
-			$(CONFIG_ZERO_PAGE_OFFSET)+0x1000]')
+			$(CONFIG_ZERO_PAGE_OFFSET) + $(CONFIG_ENTRY_OFFSET)]')
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \
diff --git a/arch/sh/boot/compressed/Makefile_32 b/arch/sh/boot/compressed/Makefile_32
index c0d25fb..47685f6 100644
--- a/arch/sh/boot/compressed/Makefile_32
+++ b/arch/sh/boot/compressed/Makefile_32
@@ -35,8 +35,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh-linux -T
 OBJCOPYFLAGS += -R .empty_zero_page
 
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,ld)
+$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
+	$(call if_changed,as_o_S)
diff --git a/arch/sh/boot/compressed/Makefile_64 b/arch/sh/boot/compressed/Makefile_64
index 912f3e2..658d4f9 100644
--- a/arch/sh/boot/compressed/Makefile_64
+++ b/arch/sh/boot/compressed/Makefile_64
@@ -37,8 +37,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh64-linux -T
 OBJCOPYFLAGS += -R .empty_zero_page
 
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,ld)
+$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
+	$(call if_changed,as_o_S)
diff --git a/arch/sh/boot/compressed/piggy.S b/arch/sh/boot/compressed/piggy.S
new file mode 100644
index 0000000..5660719
--- /dev/null
+++ b/arch/sh/boot/compressed/piggy.S
@@ -0,0 +1,8 @@
+	.global	input_len, input_data
+	.data
+input_len:
+	.long	input_data_end - input_data
+input_data:
+	.incbin	"arch/sh/boot/compressed/vmlinux.bin.gz"
+input_data_end:
+	.end
diff --git a/arch/sh/boot/compressed/vmlinux.scr b/arch/sh/boot/compressed/vmlinux.scr
deleted file mode 100644
index 1ed9d79..0000000
--- a/arch/sh/boot/compressed/vmlinux.scr
+++ /dev/null
@@ -1,9 +0,0 @@
-SECTIONS
-{
-  .data : { 
-	input_len = .;
-	LONG(input_data_end - input_data) input_data = .; 
-	*(.data) 
-	input_data_end = .; 
-	}
-}
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
new file mode 100644
index 0000000..5471df5
--- /dev/null
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -0,0 +1,947 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc4
+# Wed Jun  4 17:30:00 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+CONFIG_CPU_SUBTYPE_SH7723=y
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+CONFIG_SH_AP325RXA=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xffffffff
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+# CONFIG_SMC91X is not set
+CONFIG_SMC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
index 84c0075..7b72736 100644
--- a/arch/sh/configs/se7343_defconfig
+++ b/arch/sh/configs/se7343_defconfig
@@ -1,40 +1,55 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 11:46:17 2006
+# Linux kernel version: 2.6.26-rc8
+# Mon Jul  7 13:12:45 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -46,33 +61,41 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
+CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 # CONFIG_KMOD is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -86,62 +109,28 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-CONFIG_SOLUTION_ENGINE=y
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-CONFIG_SH_7343_SOLUTION_ENGINE=y
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SH4AL_DSP=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -150,67 +139,88 @@ CONFIG_CPU_SH4AL_DSP=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 CONFIG_CPU_SUBTYPE_SH7343=y
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_32BIT=y
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_SH_FPU is not set
+# CONFIG_CPU_BIG_ENDIAN is not set
 # CONFIG_SH_FPU_EMU is not set
 CONFIG_SH_DSP=y
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_DSP=y
+
+#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_7343_SOLUTION_ENGINE=y
 
 #
-# Timer support
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=27000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -225,57 +235,50 @@ CONFIG_SH_PCLK_FREQ=27000000
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
 CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
 # CONFIG_CMDLINE_BOOL is not set
 
 #
 # Bus options
 #
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_CF_ENABLER is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -283,22 +286,20 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
+# CONFIG_IP_PNP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
@@ -310,29 +311,18 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -345,10 +335,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -356,9 +342,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -367,36 +364,32 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -422,13 +415,15 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -445,130 +440,101 @@ CONFIG_MTD_RAM=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
+# SCSI support type (disk, tape, CD-ROM)
 #
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
 
 #
-# I2O device support
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# Network device support
+# SCSI Transports
 #
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -576,13 +542,13 @@ CONFIG_SMC91X=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -592,6 +558,7 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -608,6 +575,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -626,147 +594,102 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_UNIX98_PTYS is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
+# CONFIG_I2C is not set
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
-# Misc devices
+# Multimedia devices
 #
 
 #
-# Multimedia devices
+# Multimedia core support
 #
 CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
 CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-
-#
-# Video Capture Adapters
-#
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
 
 #
-# Video Capture Adapters
+# Multimedia drivers
 #
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-
-#
-# Radio Adapters
-#
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_EPSON1355 is not set
+
+#
+# Frame buffer hardware drivers
+#
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Console display driver support
+# Display device support
 #
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# Logo configuration
+# Console display driver support
 #
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
 # CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -802,85 +725,63 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_MPU401 is not set
 
 #
-# Open Sound System
+# SUPERH devices
 #
-# CONFIG_SOUND_PRIME is not set
 
 #
-# USB support
+# System on Chip audio support
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_SND_SOC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# SoC Audio support for SuperH
 #
 
 #
-# USB Gadget Support
+# ALSA SoC audio for Freescale SOCs
 #
-# CONFIG_USB_GADGET is not set
 
 #
-# MMC/SD Card support
+# SoC Audio for the Texas Instruments OMAP
 #
-# CONFIG_MMC is not set
 
 #
-# LED devices
+# Open Sound System
 #
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_UIO is not set
 
 #
 # File systems
 #
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -909,7 +810,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -922,40 +822,39 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
+# CONFIG_NFSD_V4 is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -963,56 +862,130 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
+CONFIG_EARLY_SCIF_CONSOLE=y
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
+CONFIG_EARLY_PRINTK=y
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
index 2dd83af..7be79cd 100644
--- a/arch/sh/configs/se7712_defconfig
+++ b/arch/sh/configs/se7712_defconfig
@@ -1,53 +1,57 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc4
-# Wed Mar 28 10:19:02 2007
+# Linux kernel version: 2.6.26-rc6
+# Wed Jun 18 16:36:08 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -55,33 +59,41 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 # CONFIG_KMOD is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -95,57 +107,17 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-CONFIG_SOLUTION_ENGINE=y
-CONFIG_SH_SOLUTION_ENGINE=y
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_LBOX_RE2 is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH3=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -153,10 +125,8 @@ CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 CONFIG_CPU_SUBTYPE_SH7712=y
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -165,37 +135,37 @@ CONFIG_CPU_SUBTYPE_SH7712=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x02000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -203,21 +173,21 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -230,6 +200,14 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_DSP=y
+
+#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_SOLUTION_ENGINE=y
+# CONFIG_SH_AP325RXA is not set
 
 #
 # Timer and clock configuration
@@ -237,6 +215,10 @@ CONFIG_CPU_HAS_SR_RB=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=66666666
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -251,7 +233,6 @@ CONFIG_SH_PCLK_FREQ=66666666
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
 
 #
 # Additional SuperH Device Drivers
@@ -267,48 +248,40 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 
 #
 # Bus options
 #
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -316,7 +289,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -324,6 +296,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -334,11 +307,10 @@ CONFIG_ASK_IP_FIB_HASH=y
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
+CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
@@ -355,30 +327,17 @@ CONFIG_INET_TUNNEL=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -391,15 +350,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
 
 #
 # Queueing/Scheduling
@@ -408,6 +359,7 @@ CONFIG_NET_SCH_CBQ=y
 CONFIG_NET_SCH_HTB=y
 CONFIG_NET_SCH_HFSC=y
 CONFIG_NET_SCH_PRIO=y
+# CONFIG_NET_SCH_RR is not set
 CONFIG_NET_SCH_RED=y
 CONFIG_NET_SCH_SFQ=y
 CONFIG_NET_SCH_TEQL=y
@@ -415,7 +367,6 @@ CONFIG_NET_SCH_TBF=y
 CONFIG_NET_SCH_GRED=y
 CONFIG_NET_SCH_DSMARK=y
 CONFIG_NET_SCH_NETEM=y
-CONFIG_NET_SCH_INGRESS=y
 
 #
 # Classification
@@ -429,50 +380,55 @@ CONFIG_NET_CLS_FW=y
 # CONFIG_NET_CLS_U32 is not set
 # CONFIG_NET_CLS_RSVP is not set
 # CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_POLICE is not set
 CONFIG_NET_CLS_IND=y
-CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_SCH_FIFO=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
 
 #
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
 # Device Drivers
 #
 
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -485,6 +441,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -510,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -533,44 +489,25 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -578,6 +515,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -599,6 +537,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -606,94 +545,72 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 CONFIG_PATA_PLATFORM=y
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SH_ETH=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -711,6 +628,7 @@ CONFIG_NETDEVICES=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -728,99 +646,78 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=m
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Hardware Monitoring support
+# Sonics Silicon Backplane
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# USB support
+# Sound
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -834,40 +731,10 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -877,20 +744,21 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -919,7 +787,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -935,68 +802,67 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
 # CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DETECT_SOFTLOCKUP is not set
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1004,21 +870,28 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DEBUG_BOOTMEM is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_SH_KGDB is not set
 
 #
@@ -1026,62 +899,100 @@ CONFIG_FRAME_POINTER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Hardware crypto devices
+# Compression
 #
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
new file mode 100644
index 0000000..83f3fe5
--- /dev/null
+++ b/arch/sh/configs/sh7763rdp_defconfig
@@ -0,0 +1,1052 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc4
+# Fri Jun  6 12:20:17 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+CONFIG_CPU_SUBTYPE_SH7763=y
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+CONFIG_SH_SH7763RDP=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_PCLK_FREQ=66666666
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig
new file mode 100644
index 0000000..ff72697
--- /dev/null
+++ b/arch/sh/configs/sh7785lcr_defconfig
@@ -0,0 +1,1388 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc8
+# Tue Jul 15 21:37:59 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_NUMA=y
+CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+CONFIG_CPU_SUBTYPE_SH7785=y
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
+# CONFIG_PMB is not set
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+# CONFIG_NUMA is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=2
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_HIGHLANDER is not set
+CONFIG_SH_SH7785LCR=y
+CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_PCLK_FREQ=50000000
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x00000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_R8169=y
+# CONFIG_R8169_NAPI is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_ALGOPCA=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+CONFIG_I2C_PCA_PLATFORM=y
+# CONFIG_I2C_SH_MOBILE is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+CONFIG_FB_SM501=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DEBUG_BOOTMEM is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
index 07188057..847e9089 100644
--- a/arch/sh/drivers/pci/Makefile
+++ b/arch/sh/drivers/pci/Makefile
@@ -23,3 +23,4 @@ obj-$(CONFIG_SH_LANDISK)		+= ops-landisk.o
 obj-$(CONFIG_SH_LBOX_RE2)		+= ops-lboxre2.o fixups-lboxre2.o
 obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= ops-se7780.o fixups-se7780.o
 obj-$(CONFIG_SH_CAYMAN)			+= ops-cayman.o
+obj-$(CONFIG_SH_SH7785LCR)		+= ops-sh7785lcr.o fixups-sh7785lcr.o
diff --git a/arch/sh/drivers/pci/fixups-sh7785lcr.c b/arch/sh/drivers/pci/fixups-sh7785lcr.c
new file mode 100644
index 0000000..4949e60
--- /dev/null
+++ b/arch/sh/drivers/pci/fixups-sh7785lcr.c
@@ -0,0 +1,46 @@
+/*
+ * arch/sh/drivers/pci/fixups-sh7785lcr.c
+ *
+ * R0P7785LC0011RL PCI fixups
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * Based on arch/sh/drivers/pci/fixups-r7780rp.c
+ * Copyright (C) 2003  Lineo uSolutions, Inc.
+ * Copyright (C) 2004 - 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/pci.h>
+#include "pci-sh4.h"
+
+int pci_fixup_pcic(void)
+{
+	pci_write_reg(0x000043ff, SH4_PCIINTM);
+	pci_write_reg(0x0000380f, SH4_PCIAINTM);
+
+	pci_write_reg(0xfbb00047, SH7780_PCICMD);
+	pci_write_reg(0x00000000, SH7780_PCIIBAR);
+
+	pci_write_reg(0x00011912, SH7780_PCISVID);
+	pci_write_reg(0x08000000, SH7780_PCICSCR0);
+	pci_write_reg(0x0000001b, SH7780_PCICSAR0);
+	pci_write_reg(0xfd000000, SH7780_PCICSCR1);
+	pci_write_reg(0x0000000f, SH7780_PCICSAR1);
+
+	pci_write_reg(0xfd000000, SH7780_PCIMBR0);
+	pci_write_reg(0x00fc0000, SH7780_PCIMBMR0);
+
+#ifdef CONFIG_32BIT
+	pci_write_reg(0xc0000000, SH7780_PCIMBR2);
+	pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
+#endif
+
+	/* Set IOBR for windows containing area specified in pci.h */
+	pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)),
+		      SH7780_PCIIOBR);
+	pci_write_reg(((SH7780_PCI_IO_SIZE - 1) & (7 << 18)), SH7780_PCIIOBMR);
+
+	return 0;
+}
diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c
index e1284fc..f54c291 100644
--- a/arch/sh/drivers/pci/ops-dreamcast.c
+++ b/arch/sh/drivers/pci/ops-dreamcast.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/pci.h>
+#include <linux/module.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -48,6 +49,7 @@ struct pci_channel board_pci_channels[] = {
 	  &gapspci_mem_resource, 0, 1 },
 	{ 0, }
 };
+EXPORT_SYMBOL(board_pci_channels);
 
 /*
  * The !gapspci_config_access case really shouldn't happen, ever, unless
diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c
new file mode 100644
index 0000000..b3bd687
--- /dev/null
+++ b/arch/sh/drivers/pci/ops-sh7785lcr.c
@@ -0,0 +1,66 @@
+/*
+ * Author:  Ian DaSilva (idasilva@mvista.com)
+ *
+ * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * PCI initialization for the Renesas R0P7785LC0011RL board
+ * Based on arch/sh/drivers/pci/ops-r7780rp.c
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include "pci-sh4.h"
+
+static char irq_tab[] __initdata = {
+	65, 66, 67, 68,
+};
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+	return irq_tab[slot];
+}
+
+static struct resource sh7785_io_resource = {
+	.name	= "SH7785_IO",
+	.start	= SH7780_PCI_IO_BASE,
+	.end	= SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
+	.flags	= IORESOURCE_IO
+};
+
+static struct resource sh7785_mem_resource = {
+	.name	= "SH7785_mem",
+	.start	= SH7780_PCI_MEMORY_BASE,
+	.end	= SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
+	.flags	= IORESOURCE_MEM
+};
+
+struct pci_channel board_pci_channels[] = {
+	{ &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff },
+	{ NULL, NULL, NULL, 0, 0 },
+};
+EXPORT_SYMBOL(board_pci_channels);
+
+static struct sh4_pci_address_map sh7785_pci_map = {
+	.window0	= {
+		.base	= SH7780_CS2_BASE_ADDR,
+		.size	= 0x04000000,
+	},
+
+	.window1	= {
+		.base	= SH7780_CS3_BASE_ADDR,
+		.size	= 0x04000000,
+	},
+
+	.flags	= SH4_PCIC_NO_RESET,
+};
+
+int __init pcibios_init_platform(void)
+{
+	return sh7780_pcic_init(&sh7785_pci_map);
+}
diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c
index ea40470..cf48b12 100644
--- a/arch/sh/drivers/pci/pci-auto.c
+++ b/arch/sh/drivers/pci/pci-auto.c
@@ -78,7 +78,7 @@ static struct pci_dev *fake_pci_dev(struct pci_channel *hose,
 }
 
 #define EARLY_PCI_OP(rw, size, type)					\
-int early_##rw##_config_##size(struct pci_channel *hose,		\
+static int early_##rw##_config_##size(struct pci_channel *hose,		\
 	int top_bus, int bus, int devfn, int offset, type value)	\
 {									\
 	return pci_##rw##_config_##size(				\
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index f57095a..d3839e6 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -135,7 +135,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
  *  If we set up a device for bus mastering, we need to check and set
  *  the latency timer as it may not be properly set.
  */
-unsigned int pcibios_max_latency = 255;
+static unsigned int pcibios_max_latency = 255;
 
 void pcibios_set_master(struct pci_dev *dev)
 {
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
index 4bbdce3..0e6905f 100644
--- a/arch/sh/kernel/Makefile_32
+++ b/arch/sh/kernel/Makefile_32
@@ -21,7 +21,7 @@ obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
-obj-$(CONFIG_BINFMT_ELF)	+= dump_task.o
+obj-$(CONFIG_ELF_CORE)		+= dump_task.o
 obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c
index 01ff4d0..d3d9f32 100644
--- a/arch/sh/kernel/cf-enabler.c
+++ b/arch/sh/kernel/cf-enabler.c
@@ -157,7 +157,7 @@ static int __init cf_init_se(void)
 }
 #endif
 
-int __init cf_init(void)
+static int __init cf_init(void)
 {
 	if (mach_is_se() || mach_is_7722se() || mach_is_7721se())
 		return cf_init_se();
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index b5f1e23..f5eb56e 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -88,7 +88,7 @@ static void propagate_rate(struct clk *clk)
 	}
 }
 
-int __clk_enable(struct clk *clk)
+static int __clk_enable(struct clk *clk)
 {
 	/*
 	 * See if this is the first time we're enabling the clock, some
@@ -111,7 +111,6 @@ int __clk_enable(struct clk *clk)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(__clk_enable);
 
 int clk_enable(struct clk *clk)
 {
@@ -131,7 +130,7 @@ static void clk_kref_release(struct kref *kref)
 	/* Nothing to do */
 }
 
-void __clk_disable(struct clk *clk)
+static void __clk_disable(struct clk *clk)
 {
 	int count = kref_put(&clk->kref, clk_kref_release);
 
@@ -143,7 +142,6 @@ void __clk_disable(struct clk *clk)
 			clk->ops->disable(clk);
 	}
 }
-EXPORT_SYMBOL_GPL(__clk_disable);
 
 void clk_disable(struct clk *clk)
 {
@@ -310,15 +308,11 @@ static int show_clocks(char *buf, char **start, off_t off,
 	list_for_each_entry_reverse(clk, &clock_list, node) {
 		unsigned long rate = clk_get_rate(clk);
 
-		/*
-		 * Don't bother listing dummy clocks with no ancestry
-		 * that only support enable and disable ops.
-		 */
-		if (unlikely(!rate && !clk->parent))
-			continue;
-
-		p += sprintf(p, "%-12s\t: %ld.%02ldMHz\n", clk->name,
-			     rate / 1000000, (rate % 1000000) / 10000);
+		p += sprintf(p, "%-12s\t: %ld.%02ldMHz\t%s\n", clk->name,
+			     rate / 1000000, (rate % 1000000) / 10000,
+			     ((clk->flags & CLK_ALWAYS_ENABLED) ||
+			      (atomic_read(&clk->kref.refcount) != 1)) ?
+			     "enabled" : "disabled");
 	}
 
 	return p - buf;
diff --git a/arch/sh/kernel/cpu/irq/intc.c b/arch/sh/kernel/cpu/irq/intc.c
index da5dae7..8c70e20 100644
--- a/arch/sh/kernel/cpu/irq/intc.c
+++ b/arch/sh/kernel/cpu/irq/intc.c
@@ -62,7 +62,7 @@ struct intc_desc_int {
 #endif
 
 static unsigned int intc_prio_level[NR_IRQS]; /* for now */
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 static unsigned long ack_handle[NR_IRQS];
 #endif
 
@@ -231,7 +231,7 @@ static void intc_disable(unsigned int irq)
 	}
 }
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 static void intc_mask_ack(unsigned int irq)
 {
 	struct intc_desc_int *d = get_intc_desc(irq);
@@ -244,8 +244,23 @@ static void intc_mask_ack(unsigned int irq)
 
 	if (handle) {
 		addr = INTC_REG(d, _INTC_ADDR_D(handle), 0);
-		ctrl_inb(addr);
-		ctrl_outb(0x3f ^ set_field(0, 1, handle), addr);
+		switch (_INTC_FN(handle)) {
+		case REG_FN_MODIFY_BASE + 0:	/* 8bit */
+			ctrl_inb(addr);
+			ctrl_outb(0xff ^ set_field(0, 1, handle), addr);
+			break;
+		case REG_FN_MODIFY_BASE + 1:	/* 16bit */
+			ctrl_inw(addr);
+			ctrl_outw(0xffff ^ set_field(0, 1, handle), addr);
+			break;
+		case REG_FN_MODIFY_BASE + 3:	/* 32bit */
+			ctrl_inl(addr);
+			ctrl_outl(0xffffffff ^ set_field(0, 1, handle), addr);
+			break;
+		default:
+			BUG();
+			break;
+		}
 	}
 }
 #endif
@@ -466,7 +481,7 @@ static unsigned int __init intc_prio_data(struct intc_desc *desc,
 	return 0;
 }
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 static unsigned int __init intc_ack_data(struct intc_desc *desc,
 					  struct intc_desc_int *d,
 					  intc_enum enum_id)
@@ -601,7 +616,7 @@ static void __init intc_register_irq(struct intc_desc *desc,
 	/* irq should be disabled by default */
 	d->chip.mask(irq);
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 	if (desc->ack_regs)
 		ack_handle[irq] = intc_ack_data(desc, d, enum_id);
 #endif
@@ -635,7 +650,7 @@ void __init register_intc_controller(struct intc_desc *desc)
 	d->nr_reg += desc->prio_regs ? desc->nr_prio_regs * 2 : 0;
 	d->nr_reg += desc->sense_regs ? desc->nr_sense_regs : 0;
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 	d->nr_reg += desc->ack_regs ? desc->nr_ack_regs : 0;
 #endif
 	d->reg = alloc_bootmem(d->nr_reg * sizeof(*d->reg));
@@ -676,7 +691,7 @@ void __init register_intc_controller(struct intc_desc *desc)
 	d->chip.mask_ack = intc_disable;
 	d->chip.set_type = intc_set_sense;
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 	if (desc->ack_regs) {
 		for (i = 0; i < desc->nr_ack_regs; i++)
 			k += save_reg(d, k, desc->ack_regs[i].set_reg, 0);
diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S
index 0fc8906..ee894e5 100644
--- a/arch/sh/kernel/cpu/sh2/entry.S
+++ b/arch/sh/kernel/cpu/sh2/entry.S
@@ -3,7 +3,7 @@
  *
  * The SH-2 exception entry
  *
- * Copyright (C) 2005,2006 Yoshinori Sato
+ * Copyright (C) 2005-2008 Yoshinori Sato
  * Copyright (C) 2005  AXE,Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -36,43 +36,41 @@ OFF_TRA	=  (16*4+6*4)
 #include <asm/entry-macros.S>
 
 ENTRY(exception_handler)
-	! already saved r0/r1
+	! stack
+	! r0 <- point sp
+	! r1
+	! pc
+	! sr
+	! r0 = temporary
+	! r1 = vector (pseudo EXPEVT / INTEVT / TRA)
 	mov.l	r2,@-sp
 	mov.l	r3,@-sp
-	mov	r0,r1
 	cli
 	mov.l	$cpu_mode,r2
 	mov.l	@r2,r0
 	mov.l	@(5*4,r15),r3	! previous SR
-	shll2	r3		! set "S" flag
-	rotl	r0		! T <- "S" flag
-	rotl	r0		! "S" flag is LSB
-	rotcr	r3		! T -> r3:b30
-	shlr	r3
-	shlr	r0
-	bt/s	1f
-	 mov.l	r3,@(5*4,r15)	! copy cpu mode to SR
+	or	r0,r3		! set MD
+	tst	r0,r0
+	bf/s	1f		! previous mode check
+	 mov.l	r3,@(5*4,r15)	! update SR
 	! switch to kernel mode
-	mov	#1,r0
-	rotr	r0
-	rotr	r0
+	mov.l	__md_bit,r0
 	mov.l	r0,@r2		! enter kernel mode
 	mov.l	$current_thread_info,r2
 	mov.l	@r2,r2
-	mov	#0x20,r0
+	mov	#(THREAD_SIZE >> 8),r0
 	shll8	r0
 	add	r2,r0
 	mov	r15,r2		! r2 = user stack top
 	mov	r0,r15		! switch kernel stack
-	add	#-4,r15		! dummy
 	mov.l	r1,@-r15	! TRA
 	sts.l	macl, @-r15
 	sts.l	mach, @-r15
 	stc.l	gbr, @-r15
-	mov.l	@(4*4,r2),r0
-	mov.l	@(5*4,r2),r1
-	mov.l	r1,@-r15	! original SR
+	mov.l	@(5*4,r2),r0
+	mov.l	r0,@-r15	! original SR
 	sts.l	pr,@-r15
+	mov.l	@(4*4,r2),r0
 	mov.l	r0,@-r15	! original PC
 	mov	r2,r3
 	add	#(4+2)*4,r3	! rewind r0 - r3 + exception frame
@@ -88,14 +86,15 @@ ENTRY(exception_handler)
 	mov.l	r6,@-r15
 	mov.l	r5,@-r15
 	mov.l	r4,@-r15
+	mov	r1,r9		! save TRA
 	mov	r2,r8		! copy user -> kernel stack
-	mov.l	@r8+,r3
+	mov.l	@(0,r8),r3
 	mov.l	r3,@-r15
-	mov.l	@r8+,r2
+	mov.l	@(4,r8),r2
 	mov.l	r2,@-r15
-	mov.l	@r8+,r1
+	mov.l	@(12,r8),r1
 	mov.l	r1,@-r15
-	mov.l	@r8+,r0
+	mov.l	@(8,r8),r0
 	bra	2f
 	 mov.l	r0,@-r15
 1:
@@ -107,10 +106,11 @@ ENTRY(exception_handler)
 	mov.l	r0,@-r15	
 	mov.l	@r2+,r0		! old R2
 	mov.l	r0,@-r15	
-	mov.l	@r2+,r0		! old R1
-	mov.l	r0,@-r15	
-	mov.l	@r2+,r0		! old R0
+	mov.l	@(4,r2),r0	! old R1
 	mov.l	r0,@-r15	
+	mov.l	@r2,r0		! old R0
+	mov.l	r0,@-r15
+	add	#8,r2
 	mov.l	@r2+,r3		! old PC
 	mov.l	@r2+,r0		! old SR
 	add	#-4,r2		! exception frame stub (sr)
@@ -135,14 +135,12 @@ ENTRY(exception_handler)
 	mov.l	r6,@-r2
 	mov.l	r5,@-r2
 	mov.l	r4,@-r2
+	mov	r1,r9
 	mov.l	@(OFF_R0,r15),r0
 	mov.l	@(OFF_R1,r15),r1
 	mov.l	@(OFF_R2,r15),r2
 	mov.l	@(OFF_R3,r15),r3
 2:
-	mov	#OFF_TRA,r8
-	add	r15,r8
-	mov.l	@r8,r9	
 	mov	#64,r8
 	cmp/hs	r8,r9
 	bt	interrupt_entry	! vec >= 64 is interrupt
@@ -150,26 +148,14 @@ ENTRY(exception_handler)
 	cmp/hs	r8,r9
 	bt	trap_entry	! 64 > vec >= 32  is trap
 
-#if defined(CONFIG_SH_FPU)
-	mov     #13,r8
-	cmp/eq  r8,r9
-	bt      10f             ! fpu
-	nop
-#endif
-
 	mov.l	4f,r8
 	mov	r9,r4
 	shll2	r9
 	add	r9,r8
-	mov.l	@r8,r8
-	mov	#0,r9
-	cmp/eq	r9,r8
+	mov.l	@r8,r8		! exception handler address
+	tst	r8,r8
 	bf	3f
 	mov.l	8f,r8		! unhandled exception
-#if defined(CONFIG_SH_FPU)
-10:
-	mov.l	9f, r8		! unhandled exception
-#endif
 3:
 	mov.l	5f,r10
 	jmp	@r8
@@ -188,10 +174,7 @@ interrupt_entry:
 5:	.long	ret_from_exception
 6:	.long	ret_from_irq
 7:	.long	do_IRQ
-8:	.long	do_exception_error
-#ifdef CONFIG_SH_FPU
-9:	.long	fpu_error_trap_handler
-#endif
+8:	.long	exception_error
 
 trap_entry:
 	mov	#0x30,r8
@@ -200,24 +183,9 @@ trap_entry:
 	add	#-0x10,r9	! convert SH2 to SH3/4 ABI
 1:	
 	shll2	r9			! TRA
-	mov	#OFF_TRA,r8
-	add	r15,r8
-	mov.l	r9,@r8
-	mov	r9,r8
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	2f, r9
-	jsr	@r9
-	 nop
-#endif
-	sti
-	bra	system_call
-	 nop
+	bra	system_call	! jump common systemcall entry
+	 mov	r9,r8
 	
-	.align	2
-#ifdef CONFIG_TRACE_IRQFLAGS
-2:	.long	trace_hardirqs_on
-#endif
-
 #if defined(CONFIG_SH_STANDARD_BIOS)
 	/* Unwind the stack and jmp to the debug entry */
 ENTRY(sh_bios_handler)
@@ -240,7 +208,7 @@ ENTRY(sh_bios_handler)
 	mov.l	@r2,r2
 	stc	sr,r3
 	mov.l	r2,@r0
-	mov.l	r3,@r0
+	mov.l	r3,@(4,r0)
 	mov.l	r1,@(8,r0)	
 	mov.l	@r15+, r0
 	mov.l	@r15+, r1
@@ -272,22 +240,30 @@ ENTRY(address_error_trap_handler)
 	mov.l	1f,r0
 	jmp	@r0
 	 mov	#0,r5				! writeaccess is unknown
-	.align	2
 
+	.align	2
 1:	.long	do_address_error
 
 restore_all:
-	cli
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	1f, r0
-	jsr	@r0
-	 nop
-#endif
+	stc	sr,r0
+	or	#0xf0,r0
+	ldc	r0,sr				! all interrupt block (same BL = 1)
+	! restore special register
+	! overlap exception frame
+	mov	r15,r0
+	add	#17*4,r0
+	lds.l	@r0+,pr
+	add	#4,r0
+	ldc.l	@r0+,gbr
+	lds.l	@r0+,mach
+	lds.l	@r0+,macl
 	mov	r15,r0
 	mov.l	$cpu_mode,r2
 	mov	#OFF_SR,r3
 	mov.l	@(r0,r3),r1
-	mov.l	r1,@r2
+	mov.l	__md_bit,r3
+	and	r1,r3				! copy MD bit
+	mov.l	r3,@r2
 	shll2	r1				! clear MD bit
 	shlr2	r1
 	mov.l	@(OFF_SP,r0),r2
@@ -297,12 +273,6 @@ restore_all:
 	mov	#OFF_PC,r3
 	mov.l	@(r0,r3),r1
 	mov.l	r1,@r2				! set pc
-	add	#4*16+4,r0
-	lds.l	@r0+,pr
-	add	#4,r0				! skip sr
-	ldc.l	@r0+,gbr
-	lds.l	@r0+,mach
-	lds.l	@r0+,macl
 	get_current_thread_info r0, r1
 	mov.l	$current_thread_info,r1
 	mov.l	r0,@r1
@@ -326,9 +296,8 @@ restore_all:
 	 nop
 
 	.align 2
-#ifdef CONFIG_TRACE_IRQFLAGS
-1:     .long   trace_hardirqs_off
-#endif
+__md_bit:
+	.long	0x40000000
 $current_thread_info:
 	.long	__current_thread_info
 $cpu_mode:	
diff --git a/arch/sh/kernel/cpu/sh2/ex.S b/arch/sh/kernel/cpu/sh2/ex.S
index 6d285af..85b0bf8 100644
--- a/arch/sh/kernel/cpu/sh2/ex.S
+++ b/arch/sh/kernel/cpu/sh2/ex.S
@@ -18,16 +18,17 @@
 exception_entry:	
 no	=	0
 	.rept	256
-	mov.l	r0,@-sp
-	mov	#no,r0
+	mov.l	r1,@-sp
 	bra	exception_trampoline
-	and	#0xff,r0
+	mov	#no,r1
 no	=	no + 1
 	.endr
 exception_trampoline:
-	mov.l	r1,@-sp
-	mov.l	$exception_handler,r1
-	jmp	@r1
+	mov.l	r0,@-sp
+	mov.l	$exception_handler,r0
+	extu.b	r1,r1
+	jmp	@r0
+	  extu.w	r1,r1
 
 	.align	2
 $exception_entry:
@@ -41,6 +42,6 @@ $exception_handler:
 ENTRY(vbr_base)
 vector	=	0
 	.rept	256
-	.long	exception_entry + vector * 8
+	.long	exception_entry + vector * 6
 vector	=	vector + 1
 	.endr
diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
index cc530f4..56e5878 100644
--- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
@@ -96,8 +96,32 @@ static struct platform_device sci_device = {
 	},
 };
 
+static struct resource eth_resources[] = {
+	[0] = {
+		.start = 0xfb000000,
+		.end =   0xfb0001c8,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = 85,
+		.end = 85,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device eth_device = {
+	.name = "sh-eth",
+	.id	= -1,
+	.dev = {
+		.platform_data = (void *)1,
+	},
+	.num_resources = ARRAY_SIZE(eth_resources),
+	.resource = eth_resources,
+};
+
 static struct platform_device *sh7619_devices[] __initdata = {
 	&sci_device,
+	&eth_device,
 };
 
 static int __init sh7619_devices_setup(void)
diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile
index 7e2b90c..1ab1ecf 100644
--- a/arch/sh/kernel/cpu/sh2a/Makefile
+++ b/arch/sh/kernel/cpu/sh2a/Makefile
@@ -4,7 +4,7 @@
 
 obj-y	:= common.o probe.o opcode_helper.o
 
-common-y	+= $(addprefix ../sh2/, ex.o entry.o)
+common-y	+= ex.o entry.o
 
 obj-$(CONFIG_SH_FPU)	+= fpu.o
 
diff --git a/arch/sh/kernel/cpu/sh2a/entry.S b/arch/sh/kernel/cpu/sh2a/entry.S
new file mode 100644
index 0000000..47096dc
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2a/entry.S
@@ -0,0 +1,249 @@
+/*
+ * arch/sh/kernel/cpu/sh2a/entry.S
+ *
+ * The SH-2A exception entry
+ *
+ * Copyright (C) 2008 Yoshinori Sato
+ * Based on arch/sh/kernel/cpu/sh2/entry.S
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/cpu/mmu_context.h>
+#include <asm/unistd.h>
+#include <asm/errno.h>
+#include <asm/page.h>
+	
+/* Offsets to the stack */
+OFF_R0  =  0		/* Return value. New ABI also arg4 */
+OFF_R1  =  4     	/* New ABI: arg5 */
+OFF_R2  =  8     	/* New ABI: arg6 */
+OFF_R3  =  12     	/* New ABI: syscall_nr */
+OFF_R4  =  16     	/* New ABI: arg0 */
+OFF_R5  =  20     	/* New ABI: arg1 */
+OFF_R6  =  24     	/* New ABI: arg2 */
+OFF_R7  =  28     	/* New ABI: arg3 */
+OFF_SP	=  (15*4)
+OFF_PC  =  (16*4)
+OFF_SR	=  (16*4+2*4)
+OFF_TRA	=  (16*4+6*4)
+
+#include <asm/entry-macros.S>
+
+ENTRY(exception_handler)
+	! stack
+	! r0 <- point sp
+	! r1
+	! pc
+	! sr
+	! r0 = temporary
+	! r1 = vector (pseudo EXPEVT / INTEVT / TRA)
+	mov.l	r2,@-sp
+	cli
+	mov.l	$cpu_mode,r2
+	bld.b	#6,@(0,r2)	!previus SR.MD
+	bst.b	#6,@(4*4,r15)	!set cpu mode to SR.MD
+	bt	1f
+	! switch to kernel mode
+	bset.b	#6,@(0,r2)	!set SR.MD
+	mov.l	$current_thread_info,r2
+	mov.l	@r2,r2
+	mov	#(THREAD_SIZE >> 8),r0
+	shll8	r0
+	add	r2,r0		! r0 = kernel stack tail
+	mov	r15,r2		! r2 = user stack top
+	mov	r0,r15		! switch kernel stack
+	mov.l	r1,@-r15	! TRA
+	sts.l	macl, @-r15
+	sts.l	mach, @-r15
+	stc.l	gbr, @-r15
+	mov.l	@(4*4,r2),r0
+	mov.l	r0,@-r15	! original SR
+	sts.l	pr,@-r15
+	mov.l	@(3*4,r2),r0
+	mov.l	r0,@-r15	! original PC
+	mov	r2,r0
+	add	#(3+2)*4,r0	! rewind r0 - r3 + exception frame
+	lds	r0,pr		! pr = original SP
+	movmu.l	r3,@-r15	! save regs
+	mov	r2,r8		! r8 =  previus stack top
+	mov	r1,r9		! r9 = interrupt vector
+	! restore previous stack
+	mov.l	@r8+,r2
+	mov.l	@r8+,r0
+	mov.l	@r8+,r1
+	bra	2f
+	 movml.l r2,@-r15
+1:
+	! in kernel exception
+	mov	r15,r2
+	add	#-((OFF_TRA + 4) - OFF_PC) + 5*4,r15
+	movmu.l	r3,@-r15
+	mov	r2,r8		! r8 = previous stack top
+	mov	r1,r9		! r9 = interrupt vector
+	! restore exception frame & regs
+	mov.l	@r8+,r2		! old R2
+	mov.l	@r8+,r0		! old R0
+	mov.l	@r8+,r1		! old R1
+	mov.l	@r8+,r10	! old PC
+	mov.l	@r8+,r11	! old SR
+	movml.l	r2,@-r15
+	mov.l	r10,@(OFF_PC,r15)
+	mov.l	r11,@(OFF_SR,r15)
+	mov.l	r8,@(OFF_SP,r15)	! save old sp
+	mov	r15,r8
+	add	#OFF_TRA + 4,r8
+	mov.l	r9,@-r8
+	sts.l	macl,@-r8
+	sts.l	mach,@-r8
+	stc.l	gbr,@-r8
+	add	#-4,r8
+	sts.l	pr,@-r8
+2:
+	! dispatch exception / interrupt
+	mov	#64,r8
+	cmp/hs	r8,r9
+	bt	interrupt_entry	! vec >= 64 is interrupt
+	mov	#32,r8
+	cmp/hs	r8,r9
+	bt	trap_entry	! 64 > vec >= 32  is trap
+
+	mov.l	4f,r8
+	mov	r9,r4
+	shll2	r9
+	add	r9,r8
+	mov.l	@r8,r8		! exception handler address
+	tst	r8,r8
+	bf	3f
+	mov.l	8f,r8		! unhandled exception
+3:
+	mov.l	5f,r10
+	jmp	@r8
+	 lds	r10,pr
+
+interrupt_entry:
+	mov	r9,r4
+	mov	r15,r5
+	mov.l	7f,r8
+	mov.l	6f,r9
+	jmp	@r8
+	 lds	r9,pr
+
+	.align	2
+4:	.long	exception_handling_table
+5:	.long	ret_from_exception
+6:	.long	ret_from_irq
+7:	.long	do_IRQ
+8:	.long	exception_error
+
+trap_entry:
+	mov	#0x30,r8
+	cmp/ge	r8,r9		! vector 0x20-0x2f is systemcall
+	bt	1f
+	add	#-0x10,r9	! convert SH2 to SH3/4 ABI
+1:	
+	shll2	r9			! TRA
+	bra	system_call	! jump common systemcall entry
+	 mov	r9,r8
+	
+#if defined(CONFIG_SH_STANDARD_BIOS)
+	/* Unwind the stack and jmp to the debug entry */
+ENTRY(sh_bios_handler)
+	mov	r15,r0
+	add	#(22-4)*4-4,r0
+	ldc.l	@r0+,gbr
+	lds.l	@r0+,mach
+	lds.l	@r0+,macl
+	mov	r15,r0
+	mov.l	@(OFF_SP,r0),r1
+	mov.l	@(OFF_SR,r2),r3
+	mov.l	r3,@-r1
+	mov.l	@(OFF_SP,r2),r3
+	mov.l	r3,@-r1
+	mov	r15,r0
+	add	#(22-4)*4-8,r0
+	mov.l	1f,r2
+	mov.l	@r2,r2
+	stc	sr,r3
+	mov.l	r2,@r0
+	mov.l	r3,@(4,r0)
+	mov.l	r1,@(8,r0)
+	movml.l	@r15+,r14
+	add	#8,r15
+	lds.l	@r15+, pr
+	rte
+	 mov.l	@r15+,r15
+	.align	2
+1:	.long	gdb_vbr_vector
+#endif /* CONFIG_SH_STANDARD_BIOS */
+
+ENTRY(address_error_trap_handler)
+	mov	r15,r4				! regs
+	mov.l	@(OFF_PC,r15),r6		! pc
+	mov.l	1f,r0
+	jmp	@r0
+	 mov	#0,r5				! writeaccess is unknown
+
+	.align	2
+1:	.long	do_address_error
+
+restore_all:
+	stc	sr,r0
+	or	#0xf0,r0
+	ldc	r0,sr				! all interrupt block (same BL = 1)
+	! restore special register
+	! overlap exception frame
+	mov	r15,r0
+	add	#17*4,r0
+	lds.l	@r0+,pr
+	add	#4,r0
+	ldc.l	@r0+,gbr
+	lds.l	@r0+,mach
+	lds.l	@r0+,macl
+	mov	r15,r0
+	mov.l	$cpu_mode,r2
+	bld.b	#6,@(OFF_SR,r15)
+	bst.b	#6,@(0,r2)			! save CPU mode
+	mov.l	@(OFF_SR,r0),r1
+	shll2	r1
+	shlr2	r1				! clear MD bit
+	mov.l	@(OFF_SP,r0),r2
+	add	#-8,r2
+	mov.l	r2,@(OFF_SP,r0)			! point exception frame top
+	mov.l	r1,@(4,r2)			! set sr
+	mov.l	@(OFF_PC,r0),r1
+	mov.l	r1,@r2				! set pc
+	get_current_thread_info r0, r1
+	mov.l	$current_thread_info,r1
+	mov.l	r0,@r1
+	movml.l	@r15+,r14
+	mov.l	@r15,r15
+	rte
+	 nop
+
+	.align 2
+$current_thread_info:
+	.long	__current_thread_info
+$cpu_mode:	
+	.long	__cpu_mode
+		
+! common exception handler
+#include "../../entry-common.S"
+	
+	.data
+! cpu operation mode 
+! bit30 = MD (compatible SH3/4)
+__cpu_mode:
+	.long	0x40000000
+		
+	.section	.bss
+__current_thread_info:
+	.long	0
+
+ENTRY(exception_handling_table)
+	.space	4*32
diff --git a/arch/sh/kernel/cpu/sh2a/ex.S b/arch/sh/kernel/cpu/sh2a/ex.S
new file mode 100644
index 0000000..3ead9e6
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2a/ex.S
@@ -0,0 +1,72 @@
+/*
+ * arch/sh/kernel/cpu/sh2a/ex.S
+ *
+ * The SH-2A exception vector table
+ *
+ * Copyright (C) 2008 Yoshinori Sato
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/linkage.h>
+
+!
+! convert Exception Vector to Exception Number
+!
+
+! exception no 0 to 255
+exception_entry0:
+no	=	0
+	.rept	256
+	mov.l	r1,@-sp
+	bra	exception_trampoline0
+	mov	#no,r1
+no	=	no + 1
+	.endr
+exception_trampoline0:
+	mov.l	r0,@-sp
+	mov.l	1f,r0
+	extu.b	r1,r1
+	jmp	@r0
+	  extu.w	r1,r1
+	 
+	.align	2
+1:	.long	exception_handler
+
+! exception no 256 to 511
+exception_entry1:
+no	=	0
+	.rept	256
+	mov.l	r1,@-sp
+	bra	exception_trampoline1
+	mov	#no,r1
+no	=	no + 1
+	.endr
+exception_trampoline1:
+	mov.l	r0,@-sp
+	extu.b	r1,r1
+	movi20	#0x100,r0
+	add	r0,r1
+	mov.l	1f,r0
+	jmp	@r0
+	  extu.w	r1,r1
+	
+	.align	2
+1:	.long	exception_handler
+
+	!
+! Exception Vector Base
+!
+	.align	2
+ENTRY(vbr_base)
+vector	=	0
+	.rept	256
+	.long	exception_entry0 + vector * 6
+vector	=	vector + 1
+	.endr
+	.rept	256
+	.long	exception_entry1 + vector * 6
+vector	=	vector + 1
+	.endr
diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S
index 11b6d9c..dac4297 100644
--- a/arch/sh/kernel/cpu/sh3/ex.S
+++ b/arch/sh/kernel/cpu/sh3/ex.S
@@ -4,7 +4,7 @@
  *  The SH-3 and SH-4 exception vector table.
 
  *  Copyright (C) 1999, 2000, 2002  Niibe Yutaka
- *  Copyright (C) 2003 - 2006  Paul Mundt
+ *  Copyright (C) 2003 - 2008  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -12,13 +12,30 @@
  */
 #include <linux/linkage.h>
 
+#if !defined(CONFIG_MMU)
+#define	tlb_miss_load			exception_error
+#define tlb_miss_store			exception_error
+#define initial_page_write		exception_error
+#define tlb_protection_violation_load	exception_error
+#define tlb_protection_violation_store	exception_error
+#define address_error_load		exception_error
+#define address_error_store		exception_error
+#endif
+
+#if !defined(CONFIG_SH_FPU)
+#define	fpu_error_trap_handler		exception_error
+#endif
+
+#if !defined(CONFIG_KGDB_NMI)
+#define kgdb_handle_exception		exception_error
+#endif
+
 	.align 2
 	.data
 
 ENTRY(exception_handling_table)
 	.long	exception_error		/* 000 */
 	.long	exception_error
-#if defined(CONFIG_MMU)
 	.long	tlb_miss_load		/* 040 */
 	.long	tlb_miss_store
 	.long	initial_page_write
@@ -26,30 +43,13 @@ ENTRY(exception_handling_table)
 	.long	tlb_protection_violation_store
 	.long	address_error_load
 	.long	address_error_store	/* 100 */
-#else
-	.long	exception_error	! tlb miss load		/* 040 */
-	.long	exception_error	! tlb miss store
-	.long	exception_error	! initial page write
-	.long	exception_error	! tlb prot violation load
-	.long	exception_error	! tlb prot violation store
-	.long	exception_error	! address error load
-	.long	exception_error	! address error store	/* 100 */
-#endif
-#if defined(CONFIG_SH_FPU)
 	.long	fpu_error_trap_handler	/* 120 */
-#else
-	.long	exception_error		/* 120 */
-#endif
 	.long	exception_error		/* 140 */
 	.long	system_call	! Unconditional Trap	 /* 160 */
 	.long	exception_error	! reserved_instruction (filled by trap_init) /* 180 */
 	.long	exception_error	! illegal_slot_instruction (filled by trap_init) /*1A0*/
 ENTRY(nmi_slot)
-#if defined (CONFIG_KGDB_NMI)
 	.long	kgdb_handle_exception	/* 1C0 */	! Allow trap to debugger
-#else
-	.long	exception_none	/* 1C0 */	! Not implemented yet
-#endif
 ENTRY(user_break_point_trap)
 	.long	break_point_trap	/* 1E0 */
 
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index be49269..2e42572 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -50,14 +50,18 @@ int __init detect_cpu_and_cache_system(void)
 	boot_cpu_data.dcache.ways		= 1;
 	boot_cpu_data.dcache.linesz		= L1_CACHE_BYTES;
 
+	/* We don't know the chip cut */
+	boot_cpu_data.cut_major = boot_cpu_data.cut_minor = -1;
+
 	/*
 	 * Setup some generic flags we can probe on SH-4A parts
 	 */
-	if (((pvr >> 24) & 0xff) == 0x10) {
+	if (((pvr >> 16) & 0xff) == 0x10) {
 		if ((cvr & 0x10000000) == 0)
 			boot_cpu_data.flags |= CPU_HAS_DSP;
 
 		boot_cpu_data.flags |= CPU_HAS_LLSC;
+		boot_cpu_data.cut_major = pvr & 0x7f;
 	}
 
 	/* FPU detection works for everyone */
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index a880e79..9381ad8 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -21,7 +21,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7763)	:= clock-sh7763.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7770)	:= clock-sh7770.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7780)	:= clock-sh7780.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7785)	:= clock-sh7785.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7343.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7722)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7723)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7366)	:= clock-sh7722.o
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
deleted file mode 100644
index 7adc4f1..0000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7343.c
- *
- * SH7343/SH7722 support for the clock framework
- *
- *  Copyright (C) 2006  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-
-/*
- * SH7343/SH7722 uses a common set of multipliers and divisors, so this
- * is quite simple..
- */
-static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
-static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
-
-#define pll_calc() (((ctrl_inl(FRQCR) >> 24) & 0x1f) + 1)
-
-static void master_clk_init(struct clk *clk)
-{
-	clk->parent = clk_get(NULL, "cpu_clk");
-}
-
-static void master_clk_recalc(struct clk *clk)
-{
-	int idx = (ctrl_inl(FRQCR) & 0x000f);
-	clk->rate *= clk->parent->rate * multipliers[idx] / divisors[idx];
-}
-
-static struct clk_ops sh7343_master_clk_ops = {
-	.init		= master_clk_init,
-	.recalc		= master_clk_recalc,
-};
-
-static void module_clk_init(struct clk *clk)
-{
-	clk->parent = NULL;
-	clk->rate = CONFIG_SH_PCLK_FREQ;
-}
-
-static struct clk_ops sh7343_module_clk_ops = {
-	.init		= module_clk_init,
-};
-
-static void bus_clk_init(struct clk *clk)
-{
-	clk->parent = clk_get(NULL, "cpu_clk");
-}
-
-static void bus_clk_recalc(struct clk *clk)
-{
-	int idx = (ctrl_inl(FRQCR) >> 8) & 0x000f;
-	clk->rate = clk->parent->rate * multipliers[idx] / divisors[idx];
-}
-
-static struct clk_ops sh7343_bus_clk_ops = {
-	.init		= bus_clk_init,
-	.recalc		= bus_clk_recalc,
-};
-
-static void cpu_clk_init(struct clk *clk)
-{
-	clk->parent = clk_get(NULL, "module_clk");
-	clk->flags |= CLK_RATE_PROPAGATES;
-	clk_set_rate(clk, clk_get_rate(clk));
-}
-
-static void cpu_clk_recalc(struct clk *clk)
-{
-	int idx = (ctrl_inl(FRQCR) >> 20) & 0x000f;
-	clk->rate = clk->parent->rate * pll_calc() *
-		multipliers[idx] / divisors[idx];
-}
-
-static struct clk_ops sh7343_cpu_clk_ops = {
-	.init		= cpu_clk_init,
-	.recalc		= cpu_clk_recalc,
-};
-
-static struct clk_ops *sh7343_clk_ops[] = {
-	&sh7343_master_clk_ops,
-	&sh7343_module_clk_ops,
-	&sh7343_bus_clk_ops,
-	&sh7343_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
-{
-	if (idx < ARRAY_SIZE(sh7343_clk_ops))
-		*ops = sh7343_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
index 299138e..db91385 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
@@ -1,7 +1,7 @@
 /*
  * arch/sh/kernel/cpu/sh4a/clock-sh7722.c
  *
- * SH7722 & SH7366 support for the clock framework
+ * SH7343, SH7722, SH7723 & SH7366 support for the clock framework
  *
  * Copyright (c) 2006-2007 Nomad Global Solutions Inc
  * Based on code for sh7343 by Paul Mundt
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/errno.h>
+#include <linux/stringify.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
 
@@ -411,40 +412,40 @@ static struct clk_ops sh7722_frqcr_clk_ops = {
  * clock ops methods for SIU A/B and IrDA clock
  *
  */
-static int sh7722_siu_which(struct clk *clk)
+
+#ifndef CONFIG_CPU_SUBTYPE_SH7343
+
+static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id)
 {
-	if (!strcmp(clk->name, "siu_a_clk"))
-		return 0;
-	if (!strcmp(clk->name, "siu_b_clk"))
-		return 1;
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
-	if (!strcmp(clk->name, "irda_clk"))
-		return 2;
-#endif
-	return -EINVAL;
+	unsigned long r;
+	int div;
+
+	r = ctrl_inl(clk->arch_flags);
+	div = sh7722_find_divisors(clk->parent->rate, rate);
+	if (div < 0)
+		return div;
+	r = (r & ~0xF) | div;
+	ctrl_outl(r, clk->arch_flags);
+	return 0;
 }
 
-static unsigned long sh7722_siu_regs[] = {
-	[0] = SCLKACR,
-	[1] = SCLKBCR,
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
-	[2] = IrDACLKCR,
-#endif
-};
+static void sh7722_siu_recalc(struct clk *clk)
+{
+	unsigned long r;
+
+	r = ctrl_inl(clk->arch_flags);
+	clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF];
+}
 
 static int sh7722_siu_start_stop(struct clk *clk, int enable)
 {
-	int siu = sh7722_siu_which(clk);
 	unsigned long r;
 
-	if (siu < 0)
-		return siu;
-	BUG_ON(siu > 2);
-	r = ctrl_inl(sh7722_siu_regs[siu]);
+	r = ctrl_inl(clk->arch_flags);
 	if (enable)
-		ctrl_outl(r & ~(1 << 8), sh7722_siu_regs[siu]);
+		ctrl_outl(r & ~(1 << 8), clk->arch_flags);
 	else
-		ctrl_outl(r | (1 << 8), sh7722_siu_regs[siu]);
+		ctrl_outl(r | (1 << 8), clk->arch_flags);
 	return 0;
 }
 
@@ -458,6 +459,15 @@ static void sh7722_siu_disable(struct clk *clk)
 	sh7722_siu_start_stop(clk, 0);
 }
 
+static struct clk_ops sh7722_siu_clk_ops = {
+	.recalc = sh7722_siu_recalc,
+	.set_rate = sh7722_siu_set_rate,
+	.enable = sh7722_siu_enable,
+	.disable = sh7722_siu_disable,
+};
+
+#endif /* CONFIG_CPU_SUBTYPE_SH7343 */
+
 static void sh7722_video_enable(struct clk *clk)
 {
 	unsigned long r;
@@ -494,43 +504,6 @@ static void sh7722_video_recalc(struct clk *clk)
 	clk->rate = clk->parent->rate / ((r & 0x3F) + 1);
 }
 
-static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id)
-{
-	int siu = sh7722_siu_which(clk);
-	unsigned long r;
-	int div;
-
-	if (siu < 0)
-		return siu;
-	BUG_ON(siu > 2);
-	r = ctrl_inl(sh7722_siu_regs[siu]);
-	div = sh7722_find_divisors(clk->parent->rate, rate);
-	if (div < 0)
-		return div;
-	r = (r & ~0xF) | div;
-	ctrl_outl(r, sh7722_siu_regs[siu]);
-	return 0;
-}
-
-static void sh7722_siu_recalc(struct clk *clk)
-{
-	int siu = sh7722_siu_which(clk);
-	unsigned long r;
-
-	if (siu < 0)
-		return /* siu */ ;
-	BUG_ON(siu > 2);
-	r = ctrl_inl(sh7722_siu_regs[siu]);
-	clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF];
-}
-
-static struct clk_ops sh7722_siu_clk_ops = {
-	.recalc = sh7722_siu_recalc,
-	.set_rate = sh7722_siu_set_rate,
-	.enable = sh7722_siu_enable,
-	.disable = sh7722_siu_disable,
-};
-
 static struct clk_ops sh7722_video_clk_ops = {
 	.recalc = sh7722_video_recalc,
 	.set_rate = sh7722_video_set_rate,
@@ -560,6 +533,9 @@ static struct clk sh7722_sdram_clock = {
 	.ops = &sh7722_frqcr_clk_ops,
 };
 
+
+#ifndef CONFIG_CPU_SUBTYPE_SH7343
+
 /*
  * these three clocks - SIU A, SIU B, IrDA - share the same clk_ops
  * methods of clk_ops determine which register they should access by
@@ -567,36 +543,151 @@ static struct clk sh7722_sdram_clock = {
  */
 static struct clk sh7722_siu_a_clock = {
 	.name = "siu_a_clk",
+	.arch_flags = SCLKACR,
 	.ops = &sh7722_siu_clk_ops,
 };
 
 static struct clk sh7722_siu_b_clock = {
 	.name = "siu_b_clk",
+	.arch_flags = SCLKBCR,
 	.ops = &sh7722_siu_clk_ops,
 };
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7722)
 static struct clk sh7722_irda_clock = {
 	.name = "irda_clk",
+	.arch_flags = IrDACLKCR,
 	.ops = &sh7722_siu_clk_ops,
 };
 #endif
+#endif /* CONFIG_CPU_SUBTYPE_SH7343 */
 
 static struct clk sh7722_video_clock = {
 	.name = "video_clk",
 	.ops = &sh7722_video_clk_ops,
 };
 
+static int sh7722_mstpcr_start_stop(struct clk *clk, unsigned long reg,
+				    int enable)
+{
+	unsigned long bit = clk->arch_flags;
+	unsigned long r;
+
+	r = ctrl_inl(reg);
+
+	if (enable)
+		r &= ~(1 << bit);
+	else
+		r |= (1 << bit);
+
+	ctrl_outl(r, reg);
+	return 0;
+}
+
+static void sh7722_mstpcr0_enable(struct clk *clk)
+{
+	sh7722_mstpcr_start_stop(clk, MSTPCR0, 1);
+}
+
+static void sh7722_mstpcr0_disable(struct clk *clk)
+{
+	sh7722_mstpcr_start_stop(clk, MSTPCR0, 0);
+}
+
+static void sh7722_mstpcr1_enable(struct clk *clk)
+{
+	sh7722_mstpcr_start_stop(clk, MSTPCR1, 1);
+}
+
+static void sh7722_mstpcr1_disable(struct clk *clk)
+{
+	sh7722_mstpcr_start_stop(clk, MSTPCR1, 0);
+}
+
+static void sh7722_mstpcr2_enable(struct clk *clk)
+{
+	sh7722_mstpcr_start_stop(clk, MSTPCR2, 1);
+}
+
+static void sh7722_mstpcr2_disable(struct clk *clk)
+{
+	sh7722_mstpcr_start_stop(clk, MSTPCR2, 0);
+}
+
+static struct clk_ops sh7722_mstpcr0_clk_ops = {
+	.enable = sh7722_mstpcr0_enable,
+	.disable = sh7722_mstpcr0_disable,
+};
+
+static struct clk_ops sh7722_mstpcr1_clk_ops = {
+	.enable = sh7722_mstpcr1_enable,
+	.disable = sh7722_mstpcr1_disable,
+};
+
+static struct clk_ops sh7722_mstpcr2_clk_ops = {
+	.enable = sh7722_mstpcr2_enable,
+	.disable = sh7722_mstpcr2_disable,
+};
+
+#define DECLARE_MSTPCRN(regnr, bitnr, bitstr)		\
+{							\
+	.name = "mstp" __stringify(regnr) bitstr,	\
+	.arch_flags = bitnr,				\
+	.ops = &sh7722_mstpcr ## regnr ## _clk_ops,	\
+}
+
+#define DECLARE_MSTPCR(regnr) \
+	DECLARE_MSTPCRN(regnr, 31, "31"), \
+	DECLARE_MSTPCRN(regnr, 30, "30"), \
+	DECLARE_MSTPCRN(regnr, 29, "29"), \
+	DECLARE_MSTPCRN(regnr, 28, "28"), \
+	DECLARE_MSTPCRN(regnr, 27, "27"), \
+	DECLARE_MSTPCRN(regnr, 26, "26"), \
+	DECLARE_MSTPCRN(regnr, 25, "25"), \
+	DECLARE_MSTPCRN(regnr, 24, "24"), \
+	DECLARE_MSTPCRN(regnr, 23, "23"), \
+	DECLARE_MSTPCRN(regnr, 22, "22"), \
+	DECLARE_MSTPCRN(regnr, 21, "21"), \
+	DECLARE_MSTPCRN(regnr, 20, "20"), \
+	DECLARE_MSTPCRN(regnr, 19, "19"), \
+	DECLARE_MSTPCRN(regnr, 18, "18"), \
+	DECLARE_MSTPCRN(regnr, 17, "17"), \
+	DECLARE_MSTPCRN(regnr, 16, "16"), \
+	DECLARE_MSTPCRN(regnr, 15, "15"), \
+	DECLARE_MSTPCRN(regnr, 14, "14"), \
+	DECLARE_MSTPCRN(regnr, 13, "13"), \
+	DECLARE_MSTPCRN(regnr, 12, "12"), \
+	DECLARE_MSTPCRN(regnr, 11, "11"), \
+	DECLARE_MSTPCRN(regnr, 10, "10"), \
+	DECLARE_MSTPCRN(regnr, 9, "09"), \
+	DECLARE_MSTPCRN(regnr, 8, "08"), \
+	DECLARE_MSTPCRN(regnr, 7, "07"), \
+	DECLARE_MSTPCRN(regnr, 6, "06"), \
+	DECLARE_MSTPCRN(regnr, 5, "05"), \
+	DECLARE_MSTPCRN(regnr, 4, "04"), \
+	DECLARE_MSTPCRN(regnr, 3, "03"), \
+	DECLARE_MSTPCRN(regnr, 2, "02"), \
+	DECLARE_MSTPCRN(regnr, 1, "01"), \
+	DECLARE_MSTPCRN(regnr, 0, "00")
+
+static struct clk sh7722_mstpcr[] = {
+	DECLARE_MSTPCR(0),
+	DECLARE_MSTPCR(1),
+	DECLARE_MSTPCR(2),
+};
+
 static struct clk *sh7722_clocks[] = {
 	&sh7722_umem_clock,
 	&sh7722_sh_clock,
 	&sh7722_peripheral_clock,
 	&sh7722_sdram_clock,
+#ifndef CONFIG_CPU_SUBTYPE_SH7343
 	&sh7722_siu_a_clock,
 	&sh7722_siu_b_clock,
 #if defined(CONFIG_CPU_SUBTYPE_SH7722)
 	&sh7722_irda_clock,
 #endif
+#endif
 	&sh7722_video_clock,
 };
 
@@ -629,5 +720,11 @@ int __init arch_clk_init(void)
 		clk_register(sh7722_clocks[i]);
 	}
 	clk_put(master);
+
+	for (i = 0; i < ARRAY_SIZE(sh7722_mstpcr); i++) {
+		pr_debug( "Registering mstpcr '%s'\n", sh7722_mstpcr[i].name);
+		clk_register(&sh7722_mstpcr[i]);
+	}
+
 	return 0;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
index 6d4f50c..78881b4 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
@@ -11,6 +11,104 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <asm/clock.h>
+
+static struct resource iic0_resources[] = {
+	[0] = {
+		.name	= "IIC0",
+		.start  = 0x04470000,
+		.end    = 0x04470017,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 96,
+		.end    = 99,
+		.flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic0_device = {
+	.name           = "i2c-sh_mobile",
+	.num_resources  = ARRAY_SIZE(iic0_resources),
+	.resource       = iic0_resources,
+};
+
+static struct resource iic1_resources[] = {
+	[0] = {
+		.name	= "IIC1",
+		.start  = 0x04750000,
+		.end    = 0x04750017,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 44,
+		.end    = 47,
+		.flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic1_device = {
+	.name           = "i2c-sh_mobile",
+	.num_resources  = ARRAY_SIZE(iic1_resources),
+	.resource       = iic1_resources,
+};
+
+static struct uio_info vpu_platform_data = {
+	.name = "VPU4",
+	.version = "0",
+	.irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+	[0] = {
+		.name	= "VPU",
+		.start	= 0xfe900000,
+		.end	= 0xfe9022eb,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device vpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &vpu_platform_data,
+	},
+	.resource	= vpu_resources,
+	.num_resources	= ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu_platform_data = {
+	.name = "VEU",
+	.version = "0",
+	.irq = 54,
+};
+
+static struct resource veu_resources[] = {
+	[0] = {
+		.name	= "VEU",
+		.start	= 0xfe920000,
+		.end	= 0xfe9200b7,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &veu_platform_data,
+	},
+	.resource	= veu_resources,
+	.num_resources	= ARRAY_SIZE(veu_resources),
+};
 
 static struct plat_sci_port sci_platform_data[] = {
 	{
@@ -32,16 +130,171 @@ static struct platform_device sci_device = {
 };
 
 static struct platform_device *sh7343_devices[] __initdata = {
+	&iic0_device,
+	&iic1_device,
 	&sci_device,
+	&vpu_device,
+	&veu_device,
 };
 
 static int __init sh7343_devices_setup(void)
 {
+	clk_always_enable("mstp031"); /* TLB */
+	clk_always_enable("mstp030"); /* IC */
+	clk_always_enable("mstp029"); /* OC */
+	clk_always_enable("mstp028"); /* URAM */
+	clk_always_enable("mstp026"); /* XYMEM */
+	clk_always_enable("mstp023"); /* INTC3 */
+	clk_always_enable("mstp022"); /* INTC */
+	clk_always_enable("mstp020"); /* SuperHyway */
+	clk_always_enable("mstp109"); /* I2C0 */
+	clk_always_enable("mstp108"); /* I2C1 */
+	clk_always_enable("mstp202"); /* VEU */
+	clk_always_enable("mstp201"); /* VPU */
+
+	platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
+	platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
+
 	return platform_add_devices(sh7343_devices,
 				    ARRAY_SIZE(sh7343_devices));
 }
 __initcall(sh7343_devices_setup);
 
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	DMAC0, DMAC1, DMAC2, DMAC3,
+	VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU,
+	MFI, VPU, TPU, Z3D4, USBI0, USBI1,
+	MMC_ERR, MMC_TRAN, MMC_FSTAT, MMC_FRDY,
+	DMAC4, DMAC5, DMAC_DADERR,
+	KEYSC,
+	SCIF, SCIF1, SCIF2, SCIF3, SCIF4,
+	SIOF0, SIOF1, SIO,
+	FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+	I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI,
+	I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI,
+	SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI,
+	IRDA,
+	SDHI0, SDHI1, SDHI2, SDHI3,
+	CMT, TSIF, SIU,
+	TMU0, TMU1, TMU2,
+	JPU, LCDC,
+
+	/* interrupt groups */
+
+	DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C0, I2C1, SIM, SDHI, USB,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+	INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+	INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+	INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
+	INTC_VECT(I2C1_ALI, 0x780), INTC_VECT(I2C1_TACKI, 0x7a0),
+	INTC_VECT(I2C1_WAITI, 0x7c0), INTC_VECT(I2C1_DTEI, 0x7e0),
+	INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820),
+	INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860),
+	INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0),
+	INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0),
+	INTC_VECT(MFI, 0x900), INTC_VECT(VPU, 0x980),
+	INTC_VECT(TPU, 0x9a0), INTC_VECT(Z3D4, 0x9e0),
+	INTC_VECT(USBI0, 0xa20), INTC_VECT(USBI1, 0xa40),
+	INTC_VECT(MMC_ERR, 0xb00), INTC_VECT(MMC_TRAN, 0xb20),
+	INTC_VECT(MMC_FSTAT, 0xb40), INTC_VECT(MMC_FRDY, 0xb60),
+	INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0),
+	INTC_VECT(DMAC_DADERR, 0xbc0), INTC_VECT(KEYSC, 0xbe0),
+	INTC_VECT(SCIF, 0xc00), INTC_VECT(SCIF1, 0xc20),
+	INTC_VECT(SCIF2, 0xc40), INTC_VECT(SCIF3, 0xc60),
+	INTC_VECT(SIOF0, 0xc80), INTC_VECT(SIOF1, 0xca0),
+	INTC_VECT(SIO, 0xd00),
+	INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0),
+	INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
+	INTC_VECT(I2C0_ALI, 0xe00), INTC_VECT(I2C0_TACKI, 0xe20),
+	INTC_VECT(I2C0_WAITI, 0xe40), INTC_VECT(I2C0_DTEI, 0xe60),
+	INTC_VECT(SDHI0, 0xe80), INTC_VECT(SDHI1, 0xea0),
+	INTC_VECT(SDHI2, 0xec0), INTC_VECT(SDHI3, 0xee0),
+	INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
+	INTC_VECT(SIU, 0xf80),
+	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+	INTC_VECT(TMU2, 0x440),
+	INTC_VECT(JPU, 0x560), INTC_VECT(LCDC, 0x580),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3),
+	INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU),
+	INTC_GROUP(MMC, MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR),
+	INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR),
+	INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
+		   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+	INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI),
+	INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI),
+	INTC_GROUP(SIM, SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI),
+	INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3),
+	INTC_GROUP(USB, USBI0, USBI1),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
+	  { VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } },
+	{ 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
+	  { 0, 0, 0, VPU, 0, 0, 0, MFI } },
+	{ 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
+	  { SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI, 0, 0, 0, IRDA } },
+	{ 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
+	  { 0, TMU2, TMU1, TMU0, JPU, 0, 0, LCDC } },
+	{ 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
+	  { KEYSC, DMAC_DADERR, DMAC5, DMAC4, SCIF3, SCIF2, SCIF1, SCIF } },
+	{ 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
+	  { 0, 0, 0, SIO, Z3D4, 0, SIOF1, SIOF0 } },
+	{ 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
+	  { I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI,
+	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
+	{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
+	  { SDHI3, SDHI2, SDHI1, SDHI0, 0, 0, 0, SIU } },
+	{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
+	  { 0, 0, 0, CMT, 0, USBI1, USBI0 } },
+	{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
+	  { MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR } },
+	{ 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
+	  { I2C1_DTEI, I2C1_WAITI, I2C1_TACKI, I2C1_ALI, TPU, 0, 0, TSIF } },
+	{ 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } },
+	{ 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, SIM } },
+	{ 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, MFI, VPU } },
+	{ 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC45, USB, CMT } },
+	{ 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF, SCIF1, SCIF2, SCIF3 } },
+	{ 0xa408001c, 0, 16, 4, /* IPRH */ { SIOF0, SIOF1, FLCTL, I2C0 } },
+	{ 0xa4080020, 0, 16, 4, /* IPRI */ { SIO, 0, TSIF, I2C1 } },
+	{ 0xa4080024, 0, 16, 4, /* IPRJ */ { Z3D4, 0, SIU } },
+	{ 0xa4080028, 0, 16, 4, /* IPRK */ { 0, MMC, 0, SDHI } },
+	{ 0xa408002c, 0, 16, 4, /* IPRL */ { 0, 0, TPU } },
+	{ 0xa4140010, 0, 32, 4, /* INTPRI00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+	{ 0xa414001c, 16, 2, /* ICR1 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xa4140024, 0, 8, /* INTREQ00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7343", vectors, groups,
+			     mask_registers, prio_registers, sense_registers,
+			     ack_registers);
+
 void __init plat_irq_setup(void)
 {
+	register_intc_controller(&intc_desc);
 }
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
index f26b5cd..6851dba 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
@@ -13,6 +13,112 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <asm/clock.h>
+
+static struct resource iic_resources[] = {
+	[0] = {
+		.name	= "IIC",
+		.start  = 0x04470000,
+		.end    = 0x04470017,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 96,
+		.end    = 99,
+		.flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic_device = {
+	.name           = "i2c-sh_mobile",
+	.num_resources  = ARRAY_SIZE(iic_resources),
+	.resource       = iic_resources,
+};
+
+static struct uio_info vpu_platform_data = {
+	.name = "VPU5",
+	.version = "0",
+	.irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+	[0] = {
+		.name	= "VPU",
+		.start	= 0xfe900000,
+		.end	= 0xfe902807,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device vpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &vpu_platform_data,
+	},
+	.resource	= vpu_resources,
+	.num_resources	= ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu0_platform_data = {
+	.name = "VEU",
+	.version = "0",
+	.irq = 54,
+};
+
+static struct resource veu0_resources[] = {
+	[0] = {
+		.name	= "VEU(1)",
+		.start	= 0xfe920000,
+		.end	= 0xfe9200b7,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu0_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &veu0_platform_data,
+	},
+	.resource	= veu0_resources,
+	.num_resources	= ARRAY_SIZE(veu0_resources),
+};
+
+static struct uio_info veu1_platform_data = {
+	.name = "VEU",
+	.version = "0",
+	.irq = 27,
+};
+
+static struct resource veu1_resources[] = {
+	[0] = {
+		.name	= "VEU(2)",
+		.start	= 0xfe924000,
+		.end	= 0xfe9240b7,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu1_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &veu1_platform_data,
+	},
+	.resource	= veu1_resources,
+	.num_resources	= ARRAY_SIZE(veu1_resources),
+};
 
 static struct plat_sci_port sci_platform_data[] = {
 	{
@@ -34,11 +140,32 @@ static struct platform_device sci_device = {
 };
 
 static struct platform_device *sh7366_devices[] __initdata = {
+	&iic_device,
 	&sci_device,
+	&vpu_device,
+	&veu0_device,
+	&veu1_device,
 };
 
 static int __init sh7366_devices_setup(void)
 {
+	clk_always_enable("mstp031"); /* TLB */
+	clk_always_enable("mstp030"); /* IC */
+	clk_always_enable("mstp029"); /* OC */
+	clk_always_enable("mstp028"); /* RSMEM */
+	clk_always_enable("mstp026"); /* XYMEM */
+	clk_always_enable("mstp023"); /* INTC3 */
+	clk_always_enable("mstp022"); /* INTC */
+	clk_always_enable("mstp020"); /* SuperHyway */
+	clk_always_enable("mstp109"); /* I2C */
+	clk_always_enable("mstp207"); /* VEU-2 */
+	clk_always_enable("mstp202"); /* VEU-1 */
+	clk_always_enable("mstp201"); /* VPU */
+
+	platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
+	platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
+	platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
+
 	return platform_add_devices(sh7366_devices,
 				    ARRAY_SIZE(sh7366_devices));
 }
@@ -97,7 +224,7 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_VECT(SIU, 0xf80),
 	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
 	INTC_VECT(TMU2, 0x440),
-	INTC_VECT(VEU2, 0x580), INTC_VECT(LCDC, 0x580),
+	INTC_VECT(VEU2, 0x560), INTC_VECT(LCDC, 0x580),
 };
 
 static struct intc_group groups[] __initdata = {
@@ -163,8 +290,14 @@ static struct intc_sense_reg sense_registers[] __initdata = {
 	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7366", vectors, groups,
-			 mask_registers, prio_registers, sense_registers);
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xa4140024, 0, 8, /* INTREQ00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7366", vectors, groups,
+			     mask_registers, prio_registers, sense_registers,
+			     ack_registers);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 62ebccf..de1ede9 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -12,6 +12,8 @@
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
 #include <linux/mm.h>
+#include <linux/uio_driver.h>
+#include <asm/clock.h>
 #include <asm/mmzone.h>
 
 static struct resource usbf_resources[] = {
@@ -59,6 +61,62 @@ static struct platform_device iic_device = {
 	.resource       = iic_resources,
 };
 
+static struct uio_info vpu_platform_data = {
+	.name = "VPU4",
+	.version = "0",
+	.irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+	[0] = {
+		.name	= "VPU",
+		.start	= 0xfe900000,
+		.end	= 0xfe9022eb,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device vpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &vpu_platform_data,
+	},
+	.resource	= vpu_resources,
+	.num_resources	= ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu_platform_data = {
+	.name = "VEU",
+	.version = "0",
+	.irq = 54,
+};
+
+static struct resource veu_resources[] = {
+	[0] = {
+		.name	= "VEU",
+		.start	= 0xfe920000,
+		.end	= 0xfe9200b7,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &veu_platform_data,
+	},
+	.resource	= veu_resources,
+	.num_resources	= ARRAY_SIZE(veu_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase	= 0xffe00000,
@@ -95,10 +153,27 @@ static struct platform_device *sh7722_devices[] __initdata = {
 	&usbf_device,
 	&iic_device,
 	&sci_device,
+	&vpu_device,
+	&veu_device,
 };
 
 static int __init sh7722_devices_setup(void)
 {
+	clk_always_enable("mstp031"); /* TLB */
+	clk_always_enable("mstp030"); /* IC */
+	clk_always_enable("mstp029"); /* OC */
+	clk_always_enable("mstp028"); /* URAM */
+	clk_always_enable("mstp026"); /* XYMEM */
+	clk_always_enable("mstp022"); /* INTC */
+	clk_always_enable("mstp020"); /* SuperHyway */
+	clk_always_enable("mstp109"); /* I2C */
+	clk_always_enable("mstp211"); /* USB */
+	clk_always_enable("mstp202"); /* VEU */
+	clk_always_enable("mstp201"); /* VPU */
+
+	platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
+	platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
+
 	return platform_add_devices(sh7722_devices,
 				    ARRAY_SIZE(sh7722_devices));
 }
@@ -229,8 +304,14 @@ static struct intc_sense_reg sense_registers[] __initdata = {
 	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7722", vectors, groups,
-			 mask_registers, prio_registers, sense_registers);
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xa4140024, 0, 8, /* INTREQ00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7722", vectors, groups,
+			     mask_registers, prio_registers, sense_registers,
+			     ack_registers);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index a0470f2..cd6baff 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -12,8 +12,94 @@
 #include <linux/serial.h>
 #include <linux/mm.h>
 #include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <asm/clock.h>
 #include <asm/mmzone.h>
 
+static struct uio_info vpu_platform_data = {
+	.name = "VPU5",
+	.version = "0",
+	.irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+	[0] = {
+		.name	= "VPU",
+		.start	= 0xfe900000,
+		.end	= 0xfe902807,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device vpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &vpu_platform_data,
+	},
+	.resource	= vpu_resources,
+	.num_resources	= ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu0_platform_data = {
+	.name = "VEU",
+	.version = "0",
+	.irq = 54,
+};
+
+static struct resource veu0_resources[] = {
+	[0] = {
+		.name	= "VEU2H0",
+		.start	= 0xfe920000,
+		.end	= 0xfe92027b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu0_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &veu0_platform_data,
+	},
+	.resource	= veu0_resources,
+	.num_resources	= ARRAY_SIZE(veu0_resources),
+};
+
+static struct uio_info veu1_platform_data = {
+	.name = "VEU",
+	.version = "0",
+	.irq = 27,
+};
+
+static struct resource veu1_resources[] = {
+	[0] = {
+		.name	= "VEU2H1",
+		.start	= 0xfe924000,
+		.end	= 0xfe92427b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu1_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &veu1_platform_data,
+	},
+	.resource	= veu1_resources,
+	.num_resources	= ARRAY_SIZE(veu1_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase        = 0xffe00000,
@@ -113,14 +199,56 @@ static struct platform_device sh7723_usb_host_device = {
 	.resource	= sh7723_usb_host_resources,
 };
 
+static struct resource iic_resources[] = {
+	[0] = {
+		.name	= "IIC",
+		.start  = 0x04470000,
+		.end    = 0x04470017,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 96,
+		.end    = 99,
+		.flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic_device = {
+	.name           = "i2c-sh_mobile",
+	.num_resources  = ARRAY_SIZE(iic_resources),
+	.resource       = iic_resources,
+};
+
 static struct platform_device *sh7723_devices[] __initdata = {
 	&sci_device,
 	&rtc_device,
+	&iic_device,
 	&sh7723_usb_host_device,
+	&vpu_device,
+	&veu0_device,
+	&veu1_device,
 };
 
 static int __init sh7723_devices_setup(void)
 {
+	clk_always_enable("mstp031"); /* TLB */
+	clk_always_enable("mstp030"); /* IC */
+	clk_always_enable("mstp029"); /* OC */
+	clk_always_enable("mstp024"); /* FPU */
+	clk_always_enable("mstp022"); /* INTC */
+	clk_always_enable("mstp020"); /* SuperHyway */
+	clk_always_enable("mstp000"); /* MERAM */
+	clk_always_enable("mstp109"); /* I2C */
+	clk_always_enable("mstp108"); /* RTC */
+	clk_always_enable("mstp211"); /* USB */
+	clk_always_enable("mstp206"); /* VEU2H1 */
+	clk_always_enable("mstp202"); /* VEU2H0 */
+	clk_always_enable("mstp201"); /* VPU */
+
+	platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
+	platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
+	platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
+
 	return platform_add_devices(sh7723_devices,
 				    ARRAY_SIZE(sh7723_devices));
 }
@@ -326,8 +454,14 @@ static struct intc_sense_reg sense_registers[] __initdata = {
 	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7723", vectors, groups,
-			 mask_registers, prio_registers, sense_registers);
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xa4140024, 0, 8, /* INTREQ00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7723", vectors, groups,
+			     mask_registers, prio_registers, sense_registers,
+			     ack_registers);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index f189a55..3c5b629 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -3,6 +3,7 @@
  *
  *  Copyright (C) 2006  Paul Mundt
  *  Copyright (C) 2007  Yoshihiro Shimoda
+ *  Copyright (C) 2008  Nobuhiro Iwamatsu
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -56,6 +57,11 @@ static struct plat_sci_port sci_platform_data[] = {
 		.type		= PORT_SCIF,
 		.irqs		= { 76, 77, 79, 78 },
 	}, {
+		.mapbase	= 0xffe10000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 104, 105, 107, 106 },
+	}, {
 		.flags = 0,
 	}
 };
@@ -208,8 +214,8 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_VECT(TMU5, 0xe40), INTC_VECT(ADC, 0xe60),
 	INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0),
 	INTC_VECT(SSI2, 0xec0), INTC_VECT(SSI3, 0xee0),
-	INTC_VECT(SCIF1_ERI, 0xf00), INTC_VECT(SCIF1_RXI, 0xf20),
-	INTC_VECT(SCIF1_BRI, 0xf40), INTC_VECT(SCIF1_TXI, 0xf60),
+	INTC_VECT(SCIF2_ERI, 0xf00), INTC_VECT(SCIF2_RXI, 0xf20),
+	INTC_VECT(SCIF2_BRI, 0xf40), INTC_VECT(SCIF2_TXI, 0xf60),
 	INTC_VECT(GPIO_CH0, 0xf80), INTC_VECT(GPIO_CH1, 0xfa0),
 	INTC_VECT(GPIO_CH2, 0xfc0), INTC_VECT(GPIO_CH3, 0xfe0),
 };
@@ -290,9 +296,14 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = {
 					    IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors,
-			NULL, irq_mask_registers, irq_prio_registers,
-			irq_sense_registers);
+static struct intc_mask_reg irq_ack_registers[] __initdata = {
+	{ 0xffd00024, 0, 32, /* INTREQ */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7763-irq", irq_vectors,
+			     NULL, irq_mask_registers, irq_prio_registers,
+			     irq_sense_registers, irq_ack_registers);
 
 
 /* External interrupt pins in IRL mode */
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index 18dbbe2..fb8200c 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -217,9 +217,14 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = {
 					    IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_irq_desc, "sh7780-irq", irq_vectors,
-			 NULL, irq_mask_registers, irq_prio_registers,
-			 irq_sense_registers);
+static struct intc_mask_reg irq_ack_registers[] __initdata = {
+	{ 0xffd00024, 0, 32, /* INTREQ */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7780-irq", irq_vectors,
+			     NULL, irq_mask_registers, irq_prio_registers,
+			     irq_sense_registers, irq_ack_registers);
 
 /* External interrupt pins in IRL mode */
 
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
index 621e732..30baa63 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -238,13 +238,18 @@ static struct intc_sense_reg sense_registers[] __initdata = {
 					    IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc_irq0123, "sh7785-irq0123", vectors_irq0123,
-			 NULL, mask_registers, prio_registers,
-			 sense_registers);
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xffd00024, 0, 32, /* INTREQ */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7785-irq0123",
+			     vectors_irq0123, NULL, mask_registers,
+			     prio_registers, sense_registers, ack_registers);
 
-static DECLARE_INTC_DESC(intc_desc_irq4567, "sh7785-irq4567", vectors_irq4567,
-			 NULL, mask_registers, prio_registers,
-			 sense_registers);
+static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7785-irq4567",
+			     vectors_irq4567, NULL, mask_registers,
+			     prio_registers, sense_registers, ack_registers);
 
 /* External interrupt pins in IRL mode */
 
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index 718bd23..5e0dd19 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -192,7 +192,7 @@ work_resched:
 	.align	2
 1:	.long	schedule
 2:	.long	do_notify_resume
-3:	.long	restore_all
+3:	.long	resume_userspace
 #ifdef CONFIG_TRACE_IRQFLAGS
 4:	.long	trace_hardirqs_on
 5:	.long	trace_hardirqs_off
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index 921892c..3326a45 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -34,18 +34,6 @@ void (*pm_idle)(void);
 void (*pm_power_off)(void);
 EXPORT_SYMBOL(pm_power_off);
 
-void disable_hlt(void)
-{
-	hlt_counter++;
-}
-EXPORT_SYMBOL(disable_hlt);
-
-void enable_hlt(void)
-{
-	hlt_counter--;
-}
-EXPORT_SYMBOL(enable_hlt);
-
 static int __init nohlt_setup(char *__unused)
 {
 	hlt_counter = 1;
@@ -60,7 +48,7 @@ static int __init hlt_setup(char *__unused)
 }
 __setup("hlt", hlt_setup);
 
-void default_idle(void)
+static void default_idle(void)
 {
 	if (!hlt_counter) {
 		clear_thread_flag(TIF_POLLING_NRFLAG);
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index 0283d81..b9dbd2d 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -36,16 +36,6 @@ static int hlt_counter = 1;
 
 #define HARD_IDLE_TIMEOUT (HZ / 3)
 
-void disable_hlt(void)
-{
-	hlt_counter++;
-}
-
-void enable_hlt(void)
-{
-	hlt_counter--;
-}
-
 static int __init nohlt_setup(char *__unused)
 {
 	hlt_counter = 1;
diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c
index fddb547..2bc72de 100644
--- a/arch/sh/kernel/ptrace_32.c
+++ b/arch/sh/kernel/ptrace_32.c
@@ -241,6 +241,29 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 	}
 #endif
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+	case PTRACE_GETFDPIC: {
+		unsigned long tmp = 0;
+
+		switch (addr) {
+		case PTRACE_GETFDPIC_EXEC:
+			tmp = child->mm->context.exec_fdpic_loadmap;
+			break;
+		case PTRACE_GETFDPIC_INTERP:
+			tmp = child->mm->context.interp_fdpic_loadmap;
+			break;
+		default:
+			break;
+		}
+
+		ret = 0;
+		if (put_user(tmp, (unsigned long *) data)) {
+			ret = -EFAULT;
+			break;
+		}
+		break;
+	}
+#endif
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index bca2bbc..6339d0c 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -398,6 +398,7 @@ const char *get_cpu_subtype(struct sh_cpuinfo *c)
 {
 	return cpu_name[c->type];
 }
+EXPORT_SYMBOL(get_cpu_subtype);
 
 #ifdef CONFIG_PROC_FS
 /* Symbolic CPU flags, keep in sync with asm/cpu-features.h */
@@ -452,6 +453,12 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	seq_printf(m, "processor\t: %d\n", cpu);
 	seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine);
 	seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c));
+	if (c->cut_major == -1)
+		seq_printf(m, "cut\t\t: unknown\n");
+	else if (c->cut_minor == -1)
+		seq_printf(m, "cut\t\t: %d.x\n", c->cut_major);
+	else
+		seq_printf(m, "cut\t\t: %d.%d\n", c->cut_major, c->cut_minor);
 
 	show_cpuflags(m, c);
 
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index f311551..4bbbde8 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -33,6 +33,11 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
+struct fdpic_func_descriptor {
+	unsigned long	text;
+	unsigned long	GOT;
+};
+
 /*
  * Atomically swap in the new signal mask, and wait for a signal.
  */
@@ -368,6 +373,7 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 		err |= __put_user(OR_R0_R0, &frame->retcode[6]);
 		err |= __put_user((__NR_sigreturn), &frame->retcode[7]);
 		regs->pr = (unsigned long) frame->retcode;
+		flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
 	}
 
 	if (err)
@@ -378,18 +384,21 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 	regs->regs[4] = signal; /* Arg for signal handler */
 	regs->regs[5] = 0;
 	regs->regs[6] = (unsigned long) &frame->sc;
-	regs->pc = (unsigned long) ka->sa.sa_handler;
+
+	if (current->personality & FDPIC_FUNCPTRS) {
+		struct fdpic_func_descriptor __user *funcptr =
+			(struct fdpic_func_descriptor __user *)ka->sa.sa_handler;
+
+		__get_user(regs->pc, &funcptr->text);
+		__get_user(regs->regs[12], &funcptr->GOT);
+	} else
+		regs->pc = (unsigned long)ka->sa.sa_handler;
 
 	set_fs(USER_DS);
 
 	pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
 		 current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
 
-	flush_cache_sigtramp(regs->pr);
-
-	if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode))
-		flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES);
-
 	return 0;
 
 give_sigsegv:
@@ -458,17 +467,22 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	regs->regs[4] = signal; /* Arg for signal handler */
 	regs->regs[5] = (unsigned long) &frame->info;
 	regs->regs[6] = (unsigned long) &frame->uc;
-	regs->pc = (unsigned long) ka->sa.sa_handler;
+
+	if (current->personality & FDPIC_FUNCPTRS) {
+		struct fdpic_func_descriptor __user *funcptr =
+			(struct fdpic_func_descriptor __user *)ka->sa.sa_handler;
+
+		__get_user(regs->pc, &funcptr->text);
+		__get_user(regs->regs[12], &funcptr->GOT);
+	} else
+		regs->pc = (unsigned long)ka->sa.sa_handler;
 
 	set_fs(USER_DS);
 
 	pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
 		 current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
 
-	flush_cache_sigtramp(regs->pr);
-
-	if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode))
-		flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES);
+	flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
 
 	return 0;
 
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
index a46cc3a..0af693e 100644
--- a/arch/sh/kernel/syscalls_32.S
+++ b/arch/sh/kernel/syscalls_32.S
@@ -343,3 +343,9 @@ ENTRY(sys_call_table)
 	.long sys_fallocate
 	.long sys_timerfd_settime	/* 325 */
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S
index d5d7843..0b436aa 100644
--- a/arch/sh/kernel/syscalls_64.S
+++ b/arch/sh/kernel/syscalls_64.S
@@ -381,3 +381,9 @@ sys_call_table:
 	.long sys_fallocate
 	.long sys_timerfd_settime
 	.long sys_timerfd_gettime
+	.long sys_signalfd4		/* 355 */
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3
+	.long sys_pipe2
+	.long sys_inotify_init1		/* 360 */
diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c
index 7281342..0758b5e 100644
--- a/arch/sh/kernel/time_32.c
+++ b/arch/sh/kernel/time_32.c
@@ -211,7 +211,7 @@ unsigned long sh_hpt_frequency = 0;
 
 #define NSEC_PER_CYC_SHIFT	10
 
-struct clocksource clocksource_sh = {
+static struct clocksource clocksource_sh = {
 	.name		= "SuperH",
 	.rating		= 200,
 	.mask		= CLOCKSOURCE_MASK(32),
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
index 8935570..1ca9ad4 100644
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -209,7 +209,7 @@ static int tmu_timer_init(void)
 	return 0;
 }
 
-struct sys_timer_ops tmu_timer_ops = {
+static struct sys_timer_ops tmu_timer_ops = {
 	.init		= tmu_timer_init,
 	.start		= tmu_timer_start,
 	.stop		= tmu_timer_stop,
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index e08b3bf..511a942 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -43,6 +43,7 @@
 # define TRAP_ILLEGAL_SLOT_INST	6
 # define TRAP_ADDRESS_ERROR	9
 # ifdef CONFIG_CPU_SH2A
+#  define TRAP_FPU_ERROR	13
 #  define TRAP_DIVZERO_ERROR	17
 #  define TRAP_DIVOVF_ERROR	18
 # endif
@@ -851,6 +852,9 @@ void __init trap_init(void)
 #ifdef CONFIG_CPU_SH2A
 	set_exception_table_vec(TRAP_DIVZERO_ERROR, do_divide_error);
 	set_exception_table_vec(TRAP_DIVOVF_ERROR, do_divide_error);
+#ifdef CONFIG_SH_FPU
+	set_exception_table_vec(TRAP_FPU_ERROR, fpu_error_trap_handler);
+#endif
 #endif
 
 	/* Setup VBR for boot cpu */
diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile
index ebb55d1..8596cc7 100644
--- a/arch/sh/lib/Makefile
+++ b/arch/sh/lib/Makefile
@@ -2,9 +2,11 @@
 # Makefile for SuperH-specific library files..
 #
 
-lib-y  = delay.o io.o memset.o memmove.o memchr.o \
+lib-y  = delay.o memset.o memmove.o memchr.o \
 	 checksum.o strlen.o div64.o div64-generic.o
 
+obj-y				+= io.o
+
 memcpy-y			:= memcpy.o
 memcpy-$(CONFIG_CPU_SH4)	:= memcpy-sh4.o
 
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 5fd2184..56d0a7d 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -145,25 +145,39 @@ choice
 
 config PAGE_SIZE_4KB
 	bool "4kB"
-	depends on !X2TLB
+	depends on !MMU || !X2TLB
 	help
 	  This is the default page size used by all SuperH CPUs.
 
 config PAGE_SIZE_8KB
 	bool "8kB"
-	depends on X2TLB
+	depends on !MMU || X2TLB
 	help
 	  This enables 8kB pages as supported by SH-X2 and later MMUs.
 
+config PAGE_SIZE_16KB
+	bool "16kB"
+	depends on !MMU
+	help
+	  This enables 16kB pages on MMU-less SH systems.
+
 config PAGE_SIZE_64KB
 	bool "64kB"
-	depends on CPU_SH4 || CPU_SH5
+	depends on !MMU || CPU_SH4 || CPU_SH5
 	help
 	  This enables support for 64kB pages, possible on all SH-4
 	  CPUs and later.
 
 endchoice
 
+config ENTRY_OFFSET
+	hex
+	default "0x00001000" if PAGE_SIZE_4KB
+	default "0x00002000" if PAGE_SIZE_8KB
+	default "0x00004000" if PAGE_SIZE_16KB
+	default "0x00010000" if PAGE_SIZE_64KB
+	default "0x00000000"
+
 choice
 	prompt "HugeTLB page size"
 	depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU
diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c
index c5b56d5..0e189cc 100644
--- a/arch/sh/mm/cache-debugfs.c
+++ b/arch/sh/mm/cache-debugfs.c
@@ -120,7 +120,7 @@ static const struct file_operations cache_debugfs_fops = {
 	.open		= cache_debugfs_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
-	.release	= seq_release,
+	.release	= single_release,
 };
 
 static int __init cache_debugfs_init(void)
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 43d7ff6b..1fdc8d9 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -4,6 +4,7 @@
  * Copyright (C) 1999, 2000, 2002  Niibe Yutaka
  * Copyright (C) 2001 - 2007  Paul Mundt
  * Copyright (C) 2003  Richard Curnow
+ * Copyright (c) 2007 STMicroelectronics (R&D) Ltd.
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -22,6 +23,7 @@
  * entirety.
  */
 #define MAX_DCACHE_PAGES	64	/* XXX: Tune for ways */
+#define MAX_ICACHE_PAGES	32
 
 static void __flush_dcache_segment_1way(unsigned long start,
 					unsigned long extent);
@@ -178,42 +180,45 @@ void __flush_invalidate_region(void *start, int size)
 /*
  * Write back the range of D-cache, and purge the I-cache.
  *
- * Called from kernel/module.c:sys_init_module and routine for a.out format.
+ * Called from kernel/module.c:sys_init_module and routine for a.out format,
+ * signal handler code and kprobes code
  */
 void flush_icache_range(unsigned long start, unsigned long end)
 {
-	flush_cache_all();
-}
-
-/*
- * Write back the D-cache and purge the I-cache for signal trampoline.
- * .. which happens to be the same behavior as flush_icache_range().
- * So, we simply flush out a line.
- */
-void __uses_jump_to_uncached flush_cache_sigtramp(unsigned long addr)
-{
-	unsigned long v, index;
-	unsigned long flags;
+	int icacheaddr;
+	unsigned long flags, v;
 	int i;
 
-	v = addr & ~(L1_CACHE_BYTES-1);
-	asm volatile("ocbwb	%0"
-		     : /* no output */
-		     : "m" (__m(v)));
-
-	index = CACHE_IC_ADDRESS_ARRAY |
-			(v & boot_cpu_data.icache.entry_mask);
-
-	local_irq_save(flags);
-	jump_to_uncached();
-
-	for (i = 0; i < boot_cpu_data.icache.ways;
-	     i++, index += boot_cpu_data.icache.way_incr)
-		ctrl_outl(0, index);	/* Clear out Valid-bit */
-
-	back_to_cached();
-	wmb();
-	local_irq_restore(flags);
+       /* If there are too many pages then just blow the caches */
+        if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
+                flush_cache_all();
+       } else {
+               /* selectively flush d-cache then invalidate the i-cache */
+               /* this is inefficient, so only use for small ranges */
+               start &= ~(L1_CACHE_BYTES-1);
+               end += L1_CACHE_BYTES-1;
+               end &= ~(L1_CACHE_BYTES-1);
+
+               local_irq_save(flags);
+               jump_to_uncached();
+
+               for (v = start; v < end; v+=L1_CACHE_BYTES) {
+                       asm volatile("ocbwb     %0"
+                                    : /* no output */
+                                    : "m" (__m(v)));
+
+                       icacheaddr = CACHE_IC_ADDRESS_ARRAY | (
+                                       v & cpu_data->icache.entry_mask);
+
+                       for (i = 0; i < cpu_data->icache.ways;
+                               i++, icacheaddr += cpu_data->icache.way_incr)
+                                       /* Clear i-cache line valid-bit */
+                                       ctrl_outl(0, icacheaddr);
+               }
+
+		back_to_cached();
+		local_irq_restore(flags);
+	}
 }
 
 static inline void flush_cache_4096(unsigned long start,
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index d3c33fc..b2ce014 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -10,6 +10,7 @@
  * for more details.
  */
 #include <linux/mm.h>
+#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <asm/cacheflush.h>
 #include <asm/addrspace.h>
@@ -27,21 +28,10 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 			   dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret, *ret_nocache;
-	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
 	int order = get_order(size);
 
-	if (mem) {
-		int page = bitmap_find_free_region(mem->bitmap, mem->size,
-						     order);
-		if (page >= 0) {
-			*dma_handle = mem->device_base + (page << PAGE_SHIFT);
-			ret = mem->virt_base + (page << PAGE_SHIFT);
-			memset(ret, 0, size);
-			return ret;
-		}
-		if (mem->flags & DMA_MEMORY_EXCLUSIVE)
-			return NULL;
-	}
+	if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
+		return ret;
 
 	ret = (void *)__get_free_pages(gfp, order);
 	if (!ret)
@@ -71,11 +61,7 @@ void dma_free_coherent(struct device *dev, size_t size,
 	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
 	int order = get_order(size);
 
-	if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) {
-		int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
-
-		bitmap_release_region(mem->bitmap, page, order);
-	} else {
+	if (!dma_release_from_coherent(dev, order, vaddr)) {
 		WARN_ON(irqs_disabled());	/* for portability */
 		BUG_ON(mem && mem->flags & DMA_MEMORY_EXCLUSIVE);
 		free_pages((unsigned long)phys_to_virt(dma_handle), order);
@@ -84,83 +70,6 @@ void dma_free_coherent(struct device *dev, size_t size,
 }
 EXPORT_SYMBOL(dma_free_coherent);
 
-int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-				dma_addr_t device_addr, size_t size, int flags)
-{
-	void __iomem *mem_base = NULL;
-	int pages = size >> PAGE_SHIFT;
-	int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
-
-	if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0)
-		goto out;
-	if (!size)
-		goto out;
-	if (dev->dma_mem)
-		goto out;
-
-	/* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */
-
-	mem_base = ioremap_nocache(bus_addr, size);
-	if (!mem_base)
-		goto out;
-
-	dev->dma_mem = kmalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
-	if (!dev->dma_mem)
-		goto out;
-	dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
-	if (!dev->dma_mem->bitmap)
-		goto free1_out;
-
-	dev->dma_mem->virt_base = mem_base;
-	dev->dma_mem->device_base = device_addr;
-	dev->dma_mem->size = pages;
-	dev->dma_mem->flags = flags;
-
-	if (flags & DMA_MEMORY_MAP)
-		return DMA_MEMORY_MAP;
-
-	return DMA_MEMORY_IO;
-
- free1_out:
-	kfree(dev->dma_mem);
- out:
-	if (mem_base)
-		iounmap(mem_base);
-	return 0;
-}
-EXPORT_SYMBOL(dma_declare_coherent_memory);
-
-void dma_release_declared_memory(struct device *dev)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-
-	if (!mem)
-		return;
-	dev->dma_mem = NULL;
-	iounmap(mem->virt_base);
-	kfree(mem->bitmap);
-	kfree(mem);
-}
-EXPORT_SYMBOL(dma_release_declared_memory);
-
-void *dma_mark_declared_memory_occupied(struct device *dev,
-					dma_addr_t device_addr, size_t size)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-	int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1) >> PAGE_SHIFT;
-	int pos, err;
-
-	if (!mem)
-		return ERR_PTR(-EINVAL);
-
-	pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
-	err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages));
-	if (err != 0)
-		return ERR_PTR(err);
-	return mem->virt_base + (pos << PAGE_SHIFT);
-}
-EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
-
 void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 		    enum dma_data_direction direction)
 {
@@ -185,3 +94,32 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	}
 }
 EXPORT_SYMBOL(dma_cache_sync);
+
+int platform_resource_setup_memory(struct platform_device *pdev,
+				   char *name, unsigned long memsize)
+{
+	struct resource *r;
+	dma_addr_t dma_handle;
+	void *buf;
+
+	r = pdev->resource + pdev->num_resources - 1;
+	if (r->flags) {
+		pr_warning("%s: unable to find empty space for resource\n",
+			name);
+		return -EINVAL;
+	}
+
+	buf = dma_alloc_coherent(NULL, memsize, &dma_handle, GFP_KERNEL);
+	if (!buf) {
+		pr_warning("%s: unable to allocate memory\n", name);
+		return -ENOMEM;
+	}
+
+	memset(buf, 0, memsize);
+
+	r->flags = IORESOURCE_MEM;
+	r->start = dma_handle;
+	r->end = r->start + memsize - 1;
+	r->name = name;
+	return 0;
+}
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index d1fa275..0c776fd 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -37,16 +37,12 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 	int fault;
 	siginfo_t info;
 
-	trace_hardirqs_on();
-	local_irq_enable();
-
 #ifdef CONFIG_SH_KGDB
 	if (kgdb_nofault && kgdb_bus_err_hook)
 		kgdb_bus_err_hook();
 #endif
 
 	tsk = current;
-	mm = tsk->mm;
 	si_code = SEGV_MAPERR;
 
 	if (unlikely(address >= TASK_SIZE)) {
@@ -88,6 +84,14 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 		return;
 	}
 
+	/* Only enable interrupts if they were on before the fault */
+	if ((regs->sr & SR_IMASK) != SR_IMASK) {
+		trace_hardirqs_on();
+		local_irq_enable();
+	}
+
+	mm = tsk->mm;
+
 	/*
 	 * If we're in an interrupt or have no user
 	 * context, we must not take the fault..
diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c
index 8c7a9ca..38870e0 100644
--- a/arch/sh/mm/pg-sh4.c
+++ b/arch/sh/mm/pg-sh4.c
@@ -111,7 +111,7 @@ EXPORT_SYMBOL(copy_user_highpage);
 /*
  * For SH-4, we have our own implementation for ptep_get_and_clear
  */
-inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
 	pte_t pte = *ptep;
 
diff --git a/arch/sh/mm/pg-sh7705.c b/arch/sh/mm/pg-sh7705.c
index 7f885b7..eaf2514 100644
--- a/arch/sh/mm/pg-sh7705.c
+++ b/arch/sh/mm/pg-sh7705.c
@@ -118,7 +118,7 @@ void copy_user_page(void *to, void *from, unsigned long address, struct page *pg
  * For SH7705, we have our own implementation for ptep_get_and_clear
  * Copied from pg-sh4.c
  */
-inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
 	pte_t pte = *ptep;
 
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index 46911bc..cef7276 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -385,7 +385,7 @@ static const struct file_operations pmb_debugfs_fops = {
 	.open		= pmb_debugfs_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
-	.release	= seq_release,
+	.release	= single_release,
 };
 
 static int __init pmb_debugfs_init(void)
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 1bba7d3..0a11cc08 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -46,3 +46,7 @@ R2D_1			RTS7751R2D_1
 CAYMAN			SH_CAYMAN
 SDK7780			SH_SDK7780
 MIGOR			SH_MIGOR
+RSK7203			SH_RSK7203
+AP325RXA		SH_AP325RXA
+SH7763RDP		SH_SH7763RDP
+SH7785LCR		SH_SH7785LCR
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 375de7c..a214002 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -68,6 +68,7 @@ config SPARC
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_ARCH_KGDB if !SMP
+	select HAVE_ARCH_TRACEHOOK
 
 # Identify this as a Sparc32 build
 config SPARC32
diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild
new file mode 100644
index 0000000..a5f0ce7
--- /dev/null
+++ b/arch/sparc/include/asm/Kbuild
@@ -0,0 +1,45 @@
+# User exported sparc header files
+include include/asm-generic/Kbuild.asm
+
+header-y += ipcbuf_32.h
+header-y += ipcbuf_64.h
+header-y += posix_types_32.h
+header-y += posix_types_64.h
+header-y += ptrace_32.h
+header-y += ptrace_64.h
+header-y += sigcontext_32.h
+header-y += sigcontext_64.h
+header-y += siginfo_32.h
+header-y += siginfo_64.h
+header-y += signal_32.h
+header-y += signal_64.h
+header-y += stat_32.h
+header-y += stat_64.h
+header-y += statfs_32.h
+header-y += statfs_64.h
+header-y += unistd_32.h
+header-y += unistd_64.h
+
+header-y += apc.h
+header-y += asi.h
+header-y += bpp.h
+header-y += display7seg.h
+header-y += envctrl.h
+header-y += fbio.h
+header-y += jsflash.h
+header-y += openprom.h
+header-y += openprom_32.h
+header-y += openprom_64.h
+header-y += openpromio.h
+header-y += perfctr.h
+header-y += psrcompat.h
+header-y += psr.h
+header-y += pstate.h
+header-y += reg.h
+header-y += reg_32.h
+header-y += reg_64.h
+header-y += traps.h
+header-y += uctx.h
+header-y += utrap.h
+header-y += vfc_ioctls.h
+header-y += watchdog.h
diff --git a/arch/sparc/include/asm/agp.h b/arch/sparc/include/asm/agp.h
new file mode 100644
index 0000000..c245687
--- /dev/null
+++ b/arch/sparc/include/asm/agp.h
@@ -0,0 +1,20 @@
+#ifndef AGP_H
+#define AGP_H 1
+
+/* dummy for now */
+
+#define map_page_into_agp(page)
+#define unmap_page_from_agp(page)
+#define flush_agp_cache() mb()
+
+/* Convert a physical address to an address suitable for the GART. */
+#define phys_to_gart(x) (x)
+#define gart_to_phys(x) (x)
+
+/* GATT allocation. Returns/accepts GATT kernel virtual address. */
+#define alloc_gatt_pages(order)		\
+	((char *)__get_free_pages(GFP_KERNEL, (order)))
+#define free_gatt_pages(table, order)	\
+	free_pages((unsigned long)(table), (order))
+
+#endif
diff --git a/arch/sparc/include/asm/apb.h b/arch/sparc/include/asm/apb.h
new file mode 100644
index 0000000..8f3b57d
--- /dev/null
+++ b/arch/sparc/include/asm/apb.h
@@ -0,0 +1,36 @@
+/*
+ * apb.h: Advanced PCI Bridge Configuration Registers and Bits
+ *
+ * Copyright (C) 1998  Eddie C. Dost  (ecd@skynet.be)
+ */
+
+#ifndef _SPARC64_APB_H
+#define _SPARC64_APB_H
+
+#define APB_TICK_REGISTER			0xb0
+#define APB_INT_ACK				0xb8
+#define APB_PRIMARY_MASTER_RETRY_LIMIT		0xc0
+#define APB_DMA_ASFR				0xc8
+#define APB_DMA_AFAR				0xd0
+#define APB_PIO_TARGET_RETRY_LIMIT		0xd8
+#define APB_PIO_TARGET_LATENCY_TIMER		0xd9
+#define APB_DMA_TARGET_RETRY_LIMIT		0xda
+#define APB_DMA_TARGET_LATENCY_TIMER		0xdb
+#define APB_SECONDARY_MASTER_RETRY_LIMIT	0xdc
+#define APB_SECONDARY_CONTROL			0xdd
+#define APB_IO_ADDRESS_MAP			0xde
+#define APB_MEM_ADDRESS_MAP			0xdf
+
+#define APB_PCI_CONTROL_LOW			0xe0
+#  define APB_PCI_CTL_LOW_ARB_PARK			(1 << 21)
+#  define APB_PCI_CTL_LOW_ERRINT_EN			(1 << 8)
+
+#define APB_PCI_CONTROL_HIGH			0xe4
+#  define APB_PCI_CTL_HIGH_SERR				(1 << 2)
+#  define APB_PCI_CTL_HIGH_ARBITER_EN			(1 << 0)
+
+#define APB_PIO_ASFR				0xe8
+#define APB_PIO_AFAR				0xf0
+#define APB_DIAG_REGISTER			0xf8
+
+#endif /* !(_SPARC64_APB_H) */
diff --git a/arch/sparc/include/asm/apc.h b/arch/sparc/include/asm/apc.h
new file mode 100644
index 0000000..24e9a7d
--- /dev/null
+++ b/arch/sparc/include/asm/apc.h
@@ -0,0 +1,64 @@
+/* apc - Driver definitions for power management functions
+ * of Aurora Personality Chip (APC) on SPARCstation-4/5 and 
+ * derivatives
+ *
+ * Copyright (c) 2001 Eric Brower (ebrower@usa.net)
+ *
+ */
+
+#ifndef _SPARC_APC_H
+#define _SPARC_APC_H
+
+#include <linux/ioctl.h>
+
+#define APC_IOC	'A'
+
+#define APCIOCGFANCTL _IOR(APC_IOC, 0x00, int)	/* Get fan speed	*/
+#define APCIOCSFANCTL _IOW(APC_IOC, 0x01, int)	/* Set fan speed	*/
+
+#define APCIOCGCPWR   _IOR(APC_IOC, 0x02, int)	/* Get CPOWER state	*/
+#define APCIOCSCPWR   _IOW(APC_IOC, 0x03, int)	/* Set CPOWER state	*/
+
+#define APCIOCGBPORT   _IOR(APC_IOC, 0x04, int)	/* Get BPORT state 	*/
+#define APCIOCSBPORT   _IOW(APC_IOC, 0x05, int)	/* Set BPORT state	*/
+
+/*
+ * Register offsets
+ */
+#define APC_IDLE_REG	0x00
+#define APC_FANCTL_REG	0x20
+#define APC_CPOWER_REG	0x24
+#define APC_BPORT_REG	0x30
+
+#define APC_REGMASK		0x01
+#define APC_BPMASK		0x03
+
+/*
+ * IDLE - CPU standby values (set to initiate standby)
+ */
+#define APC_IDLE_ON		0x01
+
+/*
+ * FANCTL - Fan speed control state values
+ */
+#define APC_FANCTL_HI	0x00	/* Fan speed high	*/
+#define APC_FANCTL_LO	0x01	/* Fan speed low	*/
+
+/*
+ * CPWR - Convenience power outlet state values 
+ */
+#define APC_CPOWER_ON	0x00	/* Conv power on	*/
+#define APC_CPOWER_OFF	0x01	/* Conv power off	*/
+
+/*
+ * BPA/BPB - Read-Write "Bit Ports" state values (reset to 0 at power-on)
+ *
+ * WARNING: Internal usage of bit ports is platform dependent--
+ * don't modify BPORT settings unless you know what you are doing.
+ * 
+ * On SS5 BPA seems to toggle onboard ethernet loopback... -E
+ */
+#define APC_BPORT_A		0x01	/* Bit Port A		*/
+#define APC_BPORT_B		0x02	/* Bit Port B		*/
+
+#endif /* !(_SPARC_APC_H) */
diff --git a/arch/sparc/include/asm/asi.h b/arch/sparc/include/asm/asi.h
new file mode 100644
index 0000000..74703c5
--- /dev/null
+++ b/arch/sparc/include/asm/asi.h
@@ -0,0 +1,262 @@
+#ifndef _SPARC_ASI_H
+#define _SPARC_ASI_H
+
+/* asi.h:  Address Space Identifier values for the sparc.
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * Pioneer work for sun4m: Paul Hatchman (paul@sfe.com.au)
+ * Joint edition for sun4c+sun4m: Pete A. Zaitcev <zaitcev@ipmce.su>
+ */
+
+/* The first batch are for the sun4c. */
+
+#define ASI_NULL1           0x00
+#define ASI_NULL2           0x01
+
+/* sun4c and sun4 control registers and mmu/vac ops */
+#define ASI_CONTROL         0x02
+#define ASI_SEGMAP          0x03
+#define ASI_PTE             0x04
+#define ASI_HWFLUSHSEG      0x05
+#define ASI_HWFLUSHPAGE     0x06
+#define ASI_REGMAP          0x06
+#define ASI_HWFLUSHCONTEXT  0x07
+
+#define ASI_USERTXT         0x08
+#define ASI_KERNELTXT       0x09
+#define ASI_USERDATA        0x0a
+#define ASI_KERNELDATA      0x0b
+
+/* VAC Cache flushing on sun4c and sun4 */
+#define ASI_FLUSHSEG        0x0c
+#define ASI_FLUSHPG         0x0d
+#define ASI_FLUSHCTX        0x0e
+
+/* SPARCstation-5: only 6 bits are decoded. */
+/* wo = Write Only, rw = Read Write;        */
+/* ss = Single Size, as = All Sizes;        */
+#define ASI_M_RES00         0x00   /* Don't touch... */
+#define ASI_M_UNA01         0x01   /* Same here... */
+#define ASI_M_MXCC          0x02   /* Access to TI VIKING MXCC registers */
+#define ASI_M_FLUSH_PROBE   0x03   /* Reference MMU Flush/Probe; rw, ss */
+#define ASI_M_MMUREGS       0x04   /* MMU Registers; rw, ss */
+#define ASI_M_TLBDIAG       0x05   /* MMU TLB only Diagnostics */
+#define ASI_M_DIAGS         0x06   /* Reference MMU Diagnostics */
+#define ASI_M_IODIAG        0x07   /* MMU I/O TLB only Diagnostics */
+#define ASI_M_USERTXT       0x08   /* Same as ASI_USERTXT; rw, as */
+#define ASI_M_KERNELTXT     0x09   /* Same as ASI_KERNELTXT; rw, as */
+#define ASI_M_USERDATA      0x0A   /* Same as ASI_USERDATA; rw, as */
+#define ASI_M_KERNELDATA    0x0B   /* Same as ASI_KERNELDATA; rw, as */
+#define ASI_M_TXTC_TAG      0x0C   /* Instruction Cache Tag; rw, ss */
+#define ASI_M_TXTC_DATA     0x0D   /* Instruction Cache Data; rw, ss */
+#define ASI_M_DATAC_TAG     0x0E   /* Data Cache Tag; rw, ss */
+#define ASI_M_DATAC_DATA    0x0F   /* Data Cache Data; rw, ss */
+
+/* The following cache flushing ASIs work only with the 'sta'
+ * instruction. Results are unpredictable for 'swap' and 'ldstuba',
+ * so don't do it.
+ */
+
+/* These ASI flushes affect external caches too. */
+#define ASI_M_FLUSH_PAGE    0x10   /* Flush I&D Cache Line (page); wo, ss */
+#define ASI_M_FLUSH_SEG     0x11   /* Flush I&D Cache Line (seg); wo, ss */
+#define ASI_M_FLUSH_REGION  0x12   /* Flush I&D Cache Line (region); wo, ss */
+#define ASI_M_FLUSH_CTX     0x13   /* Flush I&D Cache Line (context); wo, ss */
+#define ASI_M_FLUSH_USER    0x14   /* Flush I&D Cache Line (user); wo, ss */
+
+/* Block-copy operations are available only on certain V8 cpus. */
+#define ASI_M_BCOPY         0x17   /* Block copy */
+
+/* These affect only the ICACHE and are Ross HyperSparc and TurboSparc specific. */
+#define ASI_M_IFLUSH_PAGE   0x18   /* Flush I Cache Line (page); wo, ss */
+#define ASI_M_IFLUSH_SEG    0x19   /* Flush I Cache Line (seg); wo, ss */
+#define ASI_M_IFLUSH_REGION 0x1A   /* Flush I Cache Line (region); wo, ss */
+#define ASI_M_IFLUSH_CTX    0x1B   /* Flush I Cache Line (context); wo, ss */
+#define ASI_M_IFLUSH_USER   0x1C   /* Flush I Cache Line (user); wo, ss */
+
+/* Block-fill operations are available on certain V8 cpus */
+#define ASI_M_BFILL         0x1F
+
+/* This allows direct access to main memory, actually 0x20 to 0x2f are
+ * the available ASI's for physical ram pass-through, but I don't have
+ * any idea what the other ones do....
+ */
+
+#define ASI_M_BYPASS       0x20   /* Reference MMU bypass; rw, as */
+#define ASI_M_FBMEM        0x29   /* Graphics card frame buffer access */
+#define ASI_M_VMEUS        0x2A   /* VME user 16-bit access */
+#define ASI_M_VMEPS        0x2B   /* VME priv 16-bit access */
+#define ASI_M_VMEUT        0x2C   /* VME user 32-bit access */
+#define ASI_M_VMEPT        0x2D   /* VME priv 32-bit access */
+#define ASI_M_SBUS         0x2E   /* Direct SBus access */
+#define ASI_M_CTL          0x2F   /* Control Space (ECC and MXCC are here) */
+
+
+/* This is ROSS HyperSparc only. */
+#define ASI_M_FLUSH_IWHOLE 0x31   /* Flush entire ICACHE; wo, ss */
+
+/* Tsunami/Viking/TurboSparc i/d cache flash clear. */
+#define ASI_M_IC_FLCLEAR   0x36
+#define ASI_M_DC_FLCLEAR   0x37
+
+#define ASI_M_DCDR         0x39   /* Data Cache Diagnostics Register rw, ss */
+
+#define ASI_M_VIKING_TMP1  0x40	  /* Emulation temporary 1 on Viking */
+/* only available on SuperSparc I */
+/* #define ASI_M_VIKING_TMP2  0x41 */  /* Emulation temporary 2 on Viking */
+
+#define ASI_M_ACTION       0x4c   /* Breakpoint Action Register (GNU/Viking) */
+
+/* V9 Architecture mandary ASIs. */
+#define ASI_N			0x04 /* Nucleus				*/
+#define ASI_NL			0x0c /* Nucleus, little endian		*/
+#define ASI_AIUP		0x10 /* Primary, user			*/
+#define ASI_AIUS		0x11 /* Secondary, user			*/
+#define ASI_AIUPL		0x18 /* Primary, user, little endian	*/
+#define ASI_AIUSL		0x19 /* Secondary, user, little endian	*/
+#define ASI_P			0x80 /* Primary, implicit		*/
+#define ASI_S			0x81 /* Secondary, implicit		*/
+#define ASI_PNF			0x82 /* Primary, no fault		*/
+#define ASI_SNF			0x83 /* Secondary, no fault		*/
+#define ASI_PL			0x88 /* Primary, implicit, l-endian	*/
+#define ASI_SL			0x89 /* Secondary, implicit, l-endian	*/
+#define ASI_PNFL		0x8a /* Primary, no fault, l-endian	*/
+#define ASI_SNFL		0x8b /* Secondary, no fault, l-endian	*/
+
+/* SpitFire and later extended ASIs.  The "(III)" marker designates
+ * UltraSparc-III and later specific ASIs.  The "(CMT)" marker designates
+ * Chip Multi Threading specific ASIs.  "(NG)" designates Niagara specific
+ * ASIs, "(4V)" designates SUN4V specific ASIs.
+ */
+#define ASI_PHYS_USE_EC		0x14 /* PADDR, E-cachable		*/
+#define ASI_PHYS_BYPASS_EC_E	0x15 /* PADDR, E-bit			*/
+#define ASI_BLK_AIUP_4V		0x16 /* (4V) Prim, user, block ld/st	*/
+#define ASI_BLK_AIUS_4V		0x17 /* (4V) Sec, user, block ld/st	*/
+#define ASI_PHYS_USE_EC_L	0x1c /* PADDR, E-cachable, little endian*/
+#define ASI_PHYS_BYPASS_EC_E_L	0x1d /* PADDR, E-bit, little endian	*/
+#define ASI_BLK_AIUP_L_4V	0x1e /* (4V) Prim, user, block, l-endian*/
+#define ASI_BLK_AIUS_L_4V	0x1f /* (4V) Sec, user, block, l-endian	*/
+#define ASI_SCRATCHPAD		0x20 /* (4V) Scratch Pad Registers	*/
+#define ASI_MMU			0x21 /* (4V) MMU Context Registers	*/
+#define ASI_BLK_INIT_QUAD_LDD_AIUS 0x23 /* (NG) init-store, twin load,
+					 * secondary, user
+					 */
+#define ASI_NUCLEUS_QUAD_LDD	0x24 /* Cachable, qword load		*/
+#define ASI_QUEUE		0x25 /* (4V) Interrupt Queue Registers	*/
+#define ASI_QUAD_LDD_PHYS_4V	0x26 /* (4V) Physical, qword load	*/
+#define ASI_NUCLEUS_QUAD_LDD_L	0x2c /* Cachable, qword load, l-endian 	*/
+#define ASI_QUAD_LDD_PHYS_L_4V	0x2e /* (4V) Phys, qword load, l-endian	*/
+#define ASI_PCACHE_DATA_STATUS	0x30 /* (III) PCache data stat RAM diag	*/
+#define ASI_PCACHE_DATA		0x31 /* (III) PCache data RAM diag	*/
+#define ASI_PCACHE_TAG		0x32 /* (III) PCache tag RAM diag	*/
+#define ASI_PCACHE_SNOOP_TAG	0x33 /* (III) PCache snoop tag RAM diag	*/
+#define ASI_QUAD_LDD_PHYS	0x34 /* (III+) PADDR, qword load	*/
+#define ASI_WCACHE_VALID_BITS	0x38 /* (III) WCache Valid Bits diag	*/
+#define ASI_WCACHE_DATA		0x39 /* (III) WCache data RAM diag	*/
+#define ASI_WCACHE_TAG		0x3a /* (III) WCache tag RAM diag	*/
+#define ASI_WCACHE_SNOOP_TAG	0x3b /* (III) WCache snoop tag RAM diag	*/
+#define ASI_QUAD_LDD_PHYS_L	0x3c /* (III+) PADDR, qw-load, l-endian	*/
+#define ASI_SRAM_FAST_INIT	0x40 /* (III+) Fast SRAM init		*/
+#define ASI_CORE_AVAILABLE	0x41 /* (CMT) LP Available		*/
+#define ASI_CORE_ENABLE_STAT	0x41 /* (CMT) LP Enable Status		*/
+#define ASI_CORE_ENABLE		0x41 /* (CMT) LP Enable RW		*/
+#define ASI_XIR_STEERING	0x41 /* (CMT) XIR Steering RW		*/
+#define ASI_CORE_RUNNING_RW	0x41 /* (CMT) LP Running RW		*/
+#define ASI_CORE_RUNNING_W1S	0x41 /* (CMT) LP Running Write-One Set	*/
+#define ASI_CORE_RUNNING_W1C	0x41 /* (CMT) LP Running Write-One Clr	*/
+#define ASI_CORE_RUNNING_STAT	0x41 /* (CMT) LP Running Status		*/
+#define ASI_CMT_ERROR_STEERING	0x41 /* (CMT) Error Steering RW		*/
+#define ASI_DCACHE_INVALIDATE	0x42 /* (III) DCache Invalidate diag	*/
+#define ASI_DCACHE_UTAG		0x43 /* (III) DCache uTag diag		*/
+#define ASI_DCACHE_SNOOP_TAG	0x44 /* (III) DCache snoop tag RAM diag	*/
+#define ASI_LSU_CONTROL		0x45 /* Load-store control unit		*/
+#define ASI_DCU_CONTROL_REG	0x45 /* (III) DCache Unit Control reg	*/
+#define ASI_DCACHE_DATA		0x46 /* DCache data-ram diag access	*/
+#define ASI_DCACHE_TAG		0x47 /* Dcache tag/valid ram diag access*/
+#define ASI_INTR_DISPATCH_STAT	0x48 /* IRQ vector dispatch status	*/
+#define ASI_INTR_RECEIVE	0x49 /* IRQ vector receive status	*/
+#define ASI_UPA_CONFIG		0x4a /* UPA config space		*/
+#define ASI_JBUS_CONFIG		0x4a /* (IIIi) JBUS Config Register	*/
+#define ASI_SAFARI_CONFIG	0x4a /* (III) Safari Config Register	*/
+#define ASI_SAFARI_ADDRESS	0x4a /* (III) Safari Address Register	*/
+#define ASI_ESTATE_ERROR_EN	0x4b /* E-cache error enable space	*/
+#define ASI_AFSR		0x4c /* Async fault status register	*/
+#define ASI_AFAR		0x4d /* Async fault address register	*/
+#define ASI_EC_TAG_DATA		0x4e /* E-cache tag/valid ram diag acc	*/
+#define ASI_IMMU		0x50 /* Insn-MMU main register space	*/
+#define ASI_IMMU_TSB_8KB_PTR	0x51 /* Insn-MMU 8KB TSB pointer reg	*/
+#define ASI_IMMU_TSB_64KB_PTR	0x52 /* Insn-MMU 64KB TSB pointer reg	*/
+#define ASI_ITLB_DATA_IN	0x54 /* Insn-MMU TLB data in reg	*/
+#define ASI_ITLB_DATA_ACCESS	0x55 /* Insn-MMU TLB data access reg	*/
+#define ASI_ITLB_TAG_READ	0x56 /* Insn-MMU TLB tag read reg	*/
+#define ASI_IMMU_DEMAP		0x57 /* Insn-MMU TLB demap		*/
+#define ASI_DMMU		0x58 /* Data-MMU main register space	*/
+#define ASI_DMMU_TSB_8KB_PTR	0x59 /* Data-MMU 8KB TSB pointer reg	*/
+#define ASI_DMMU_TSB_64KB_PTR	0x5a /* Data-MMU 16KB TSB pointer reg	*/
+#define ASI_DMMU_TSB_DIRECT_PTR	0x5b /* Data-MMU TSB direct pointer reg	*/
+#define ASI_DTLB_DATA_IN	0x5c /* Data-MMU TLB data in reg	*/
+#define ASI_DTLB_DATA_ACCESS	0x5d /* Data-MMU TLB data access reg	*/
+#define ASI_DTLB_TAG_READ	0x5e /* Data-MMU TLB tag read reg	*/
+#define ASI_DMMU_DEMAP		0x5f /* Data-MMU TLB demap		*/
+#define ASI_IIU_INST_TRAP	0x60 /* (III) Instruction Breakpoint	*/
+#define ASI_INTR_ID		0x63 /* (CMT) Interrupt ID register	*/
+#define ASI_CORE_ID		0x63 /* (CMT) LP ID register		*/
+#define ASI_CESR_ID		0x63 /* (CMT) CESR ID register		*/
+#define ASI_IC_INSTR		0x66 /* Insn cache instrucion ram diag	*/
+#define ASI_IC_TAG		0x67 /* Insn cache tag/valid ram diag 	*/
+#define ASI_IC_STAG		0x68 /* (III) Insn cache snoop tag ram	*/
+#define ASI_IC_PRE_DECODE	0x6e /* Insn cache pre-decode ram diag	*/
+#define ASI_IC_NEXT_FIELD	0x6f /* Insn cache next-field ram diag	*/
+#define ASI_BRPRED_ARRAY	0x6f /* (III) Branch Prediction RAM diag*/
+#define ASI_BLK_AIUP		0x70 /* Primary, user, block load/store	*/
+#define ASI_BLK_AIUS		0x71 /* Secondary, user, block ld/st	*/
+#define ASI_MCU_CTRL_REG	0x72 /* (III) Memory controller regs	*/
+#define ASI_EC_DATA		0x74 /* (III) E-cache data staging reg	*/
+#define ASI_EC_CTRL		0x75 /* (III) E-cache control reg	*/
+#define ASI_EC_W		0x76 /* E-cache diag write access	*/
+#define ASI_UDB_ERROR_W		0x77 /* External UDB error regs W	*/
+#define ASI_UDB_CONTROL_W	0x77 /* External UDB control regs W	*/
+#define ASI_INTR_W		0x77 /* IRQ vector dispatch write	*/
+#define ASI_INTR_DATAN_W	0x77 /* (III) Out irq vector data reg N	*/
+#define ASI_INTR_DISPATCH_W	0x77 /* (III) Interrupt vector dispatch	*/
+#define ASI_BLK_AIUPL		0x78 /* Primary, user, little, blk ld/st*/
+#define ASI_BLK_AIUSL		0x79 /* Secondary, user, little, blk ld/st*/
+#define ASI_EC_R		0x7e /* E-cache diag read access	*/
+#define ASI_UDBH_ERROR_R	0x7f /* External UDB error regs rd hi	*/
+#define ASI_UDBL_ERROR_R	0x7f /* External UDB error regs rd low	*/
+#define ASI_UDBH_CONTROL_R	0x7f /* External UDB control regs rd hi	*/
+#define ASI_UDBL_CONTROL_R	0x7f /* External UDB control regs rd low*/
+#define ASI_INTR_R		0x7f /* IRQ vector dispatch read	*/
+#define ASI_INTR_DATAN_R	0x7f /* (III) In irq vector data reg N	*/
+#define ASI_PST8_P		0xc0 /* Primary, 8 8-bit, partial	*/
+#define ASI_PST8_S		0xc1 /* Secondary, 8 8-bit, partial	*/
+#define ASI_PST16_P		0xc2 /* Primary, 4 16-bit, partial	*/
+#define ASI_PST16_S		0xc3 /* Secondary, 4 16-bit, partial	*/
+#define ASI_PST32_P		0xc4 /* Primary, 2 32-bit, partial	*/
+#define ASI_PST32_S		0xc5 /* Secondary, 2 32-bit, partial	*/
+#define ASI_PST8_PL		0xc8 /* Primary, 8 8-bit, partial, L	*/
+#define ASI_PST8_SL		0xc9 /* Secondary, 8 8-bit, partial, L	*/
+#define ASI_PST16_PL		0xca /* Primary, 4 16-bit, partial, L	*/
+#define ASI_PST16_SL		0xcb /* Secondary, 4 16-bit, partial, L	*/
+#define ASI_PST32_PL		0xcc /* Primary, 2 32-bit, partial, L	*/
+#define ASI_PST32_SL		0xcd /* Secondary, 2 32-bit, partial, L	*/
+#define ASI_FL8_P		0xd0 /* Primary, 1 8-bit, fpu ld/st	*/
+#define ASI_FL8_S		0xd1 /* Secondary, 1 8-bit, fpu ld/st	*/
+#define ASI_FL16_P		0xd2 /* Primary, 1 16-bit, fpu ld/st	*/
+#define ASI_FL16_S		0xd3 /* Secondary, 1 16-bit, fpu ld/st	*/
+#define ASI_FL8_PL		0xd8 /* Primary, 1 8-bit, fpu ld/st, L	*/
+#define ASI_FL8_SL		0xd9 /* Secondary, 1 8-bit, fpu ld/st, L*/
+#define ASI_FL16_PL		0xda /* Primary, 1 16-bit, fpu ld/st, L	*/
+#define ASI_FL16_SL		0xdb /* Secondary, 1 16-bit, fpu ld/st,L*/
+#define ASI_BLK_COMMIT_P	0xe0 /* Primary, blk store commit	*/
+#define ASI_BLK_COMMIT_S	0xe1 /* Secondary, blk store commit	*/
+#define ASI_BLK_INIT_QUAD_LDD_P	0xe2 /* (NG) init-store, twin load,
+				      * primary, implicit
+				      */
+#define ASI_BLK_P		0xf0 /* Primary, blk ld/st		*/
+#define ASI_BLK_S		0xf1 /* Secondary, blk ld/st		*/
+#define ASI_BLK_PL		0xf8 /* Primary, blk ld/st, little	*/
+#define ASI_BLK_SL		0xf9 /* Secondary, blk ld/st, little	*/
+
+#endif /* _SPARC_ASI_H */
diff --git a/arch/sparc/include/asm/asmmacro.h b/arch/sparc/include/asm/asmmacro.h
new file mode 100644
index 0000000..a619a4d
--- /dev/null
+++ b/arch/sparc/include/asm/asmmacro.h
@@ -0,0 +1,45 @@
+/* asmmacro.h: Assembler macros.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caipfs.rutgers.edu)
+ */
+
+#ifndef _SPARC_ASMMACRO_H
+#define _SPARC_ASMMACRO_H
+
+#include <asm/btfixup.h>
+#include <asm/asi.h>
+
+#define GET_PROCESSOR4M_ID(reg) \
+	rd	%tbr, %reg; \
+	srl	%reg, 12, %reg; \
+	and	%reg, 3, %reg;
+
+#define GET_PROCESSOR4D_ID(reg) \
+	lda	[%g0] ASI_M_VIKING_TMP1, %reg;
+
+/* All trap entry points _must_ begin with this macro or else you
+ * lose.  It makes sure the kernel has a proper window so that
+ * c-code can be called.
+ */
+#define SAVE_ALL_HEAD \
+	sethi	%hi(trap_setup), %l4; \
+	jmpl	%l4 + %lo(trap_setup), %l6;
+#define SAVE_ALL \
+	SAVE_ALL_HEAD \
+	 nop;
+
+/* All traps low-level code here must end with this macro. */
+#define RESTORE_ALL b ret_trap_entry; clr %l6;
+
+/* sun4 probably wants half word accesses to ASI_SEGMAP, while sun4c+
+   likes byte accesses. These are to avoid ifdef mania. */
+
+#ifdef CONFIG_SUN4
+#define lduXa	lduha
+#define stXa	stha
+#else
+#define lduXa	lduba
+#define stXa	stba
+#endif
+
+#endif /* !(_SPARC_ASMMACRO_H) */
diff --git a/arch/sparc/include/asm/atomic.h b/arch/sparc/include/asm/atomic.h
new file mode 100644
index 0000000..8ff83d8
--- /dev/null
+++ b/arch/sparc/include/asm/atomic.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_ATOMIC_H
+#define ___ASM_SPARC_ATOMIC_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/atomic_64.h>
+#else
+#include <asm/atomic_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/atomic_32.h b/arch/sparc/include/asm/atomic_32.h
new file mode 100644
index 0000000..5c944b5
--- /dev/null
+++ b/arch/sparc/include/asm/atomic_32.h
@@ -0,0 +1,165 @@
+/* atomic.h: These still suck, but the I-cache hit rate is higher.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 2000 Anton Blanchard (anton@linuxcare.com.au)
+ * Copyright (C) 2007 Kyle McMartin (kyle@parisc-linux.org)
+ *
+ * Additions by Keith M Wesolowski (wesolows@foobazco.org) based
+ * on asm-parisc/atomic.h Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>.
+ */
+
+#ifndef __ARCH_SPARC_ATOMIC__
+#define __ARCH_SPARC_ATOMIC__
+
+#include <linux/types.h>
+
+typedef struct { volatile int counter; } atomic_t;
+
+#ifdef __KERNEL__
+
+#define ATOMIC_INIT(i)  { (i) }
+
+extern int __atomic_add_return(int, atomic_t *);
+extern int atomic_cmpxchg(atomic_t *, int, int);
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+extern int atomic_add_unless(atomic_t *, int, int);
+extern void atomic_set(atomic_t *, int);
+
+#define atomic_read(v)          ((v)->counter)
+
+#define atomic_add(i, v)	((void)__atomic_add_return( (int)(i), (v)))
+#define atomic_sub(i, v)	((void)__atomic_add_return(-(int)(i), (v)))
+#define atomic_inc(v)		((void)__atomic_add_return(        1, (v)))
+#define atomic_dec(v)		((void)__atomic_add_return(       -1, (v)))
+
+#define atomic_add_return(i, v)	(__atomic_add_return( (int)(i), (v)))
+#define atomic_sub_return(i, v)	(__atomic_add_return(-(int)(i), (v)))
+#define atomic_inc_return(v)	(__atomic_add_return(        1, (v)))
+#define atomic_dec_return(v)	(__atomic_add_return(       -1, (v)))
+
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0)
+#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0)
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+/* This is the old 24-bit implementation.  It's still used internally
+ * by some sparc-specific code, notably the semaphore implementation.
+ */
+typedef struct { volatile int counter; } atomic24_t;
+
+#ifndef CONFIG_SMP
+
+#define ATOMIC24_INIT(i)  { (i) }
+#define atomic24_read(v)          ((v)->counter)
+#define atomic24_set(v, i)        (((v)->counter) = i)
+
+#else
+/* We do the bulk of the actual work out of line in two common
+ * routines in assembler, see arch/sparc/lib/atomic.S for the
+ * "fun" details.
+ *
+ * For SMP the trick is you embed the spin lock byte within
+ * the word, use the low byte so signedness is easily retained
+ * via a quick arithmetic shift.  It looks like this:
+ *
+ *	----------------------------------------
+ *	| signed 24-bit counter value |  lock  |  atomic_t
+ *	----------------------------------------
+ *	 31                          8 7      0
+ */
+
+#define ATOMIC24_INIT(i)	{ ((i) << 8) }
+
+static inline int atomic24_read(const atomic24_t *v)
+{
+	int ret = v->counter;
+
+	while(ret & 0xff)
+		ret = v->counter;
+
+	return ret >> 8;
+}
+
+#define atomic24_set(v, i)	(((v)->counter) = ((i) << 8))
+#endif
+
+static inline int __atomic24_add(int i, atomic24_t *v)
+{
+	register volatile int *ptr asm("g1");
+	register int increment asm("g2");
+	register int tmp1 asm("g3");
+	register int tmp2 asm("g4");
+	register int tmp3 asm("g7");
+
+	ptr = &v->counter;
+	increment = i;
+
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___atomic24_add\n\t"
+	" add	%%o7, 8, %%o7\n"
+	: "=&r" (increment), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3)
+	: "0" (increment), "r" (ptr)
+	: "memory", "cc");
+
+	return increment;
+}
+
+static inline int __atomic24_sub(int i, atomic24_t *v)
+{
+	register volatile int *ptr asm("g1");
+	register int increment asm("g2");
+	register int tmp1 asm("g3");
+	register int tmp2 asm("g4");
+	register int tmp3 asm("g7");
+
+	ptr = &v->counter;
+	increment = i;
+
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___atomic24_sub\n\t"
+	" add	%%o7, 8, %%o7\n"
+	: "=&r" (increment), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3)
+	: "0" (increment), "r" (ptr)
+	: "memory", "cc");
+
+	return increment;
+}
+
+#define atomic24_add(i, v) ((void)__atomic24_add((i), (v)))
+#define atomic24_sub(i, v) ((void)__atomic24_sub((i), (v)))
+
+#define atomic24_dec_return(v) __atomic24_sub(1, (v))
+#define atomic24_inc_return(v) __atomic24_add(1, (v))
+
+#define atomic24_sub_and_test(i, v) (__atomic24_sub((i), (v)) == 0)
+#define atomic24_dec_and_test(v) (__atomic24_sub(1, (v)) == 0)
+
+#define atomic24_inc(v) ((void)__atomic24_add(1, (v)))
+#define atomic24_dec(v) ((void)__atomic24_sub(1, (v)))
+
+#define atomic24_add_negative(i, v) (__atomic24_add((i), (v)) < 0)
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#endif /* !(__KERNEL__) */
+
+#include <asm-generic/atomic.h>
+#endif /* !(__ARCH_SPARC_ATOMIC__) */
diff --git a/arch/sparc/include/asm/atomic_64.h b/arch/sparc/include/asm/atomic_64.h
new file mode 100644
index 0000000..2c71ec4a
--- /dev/null
+++ b/arch/sparc/include/asm/atomic_64.h
@@ -0,0 +1,128 @@
+/* atomic.h: Thankfully the V9 is at least reasonable for this
+ *           stuff.
+ *
+ * Copyright (C) 1996, 1997, 2000 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef __ARCH_SPARC64_ATOMIC__
+#define __ARCH_SPARC64_ATOMIC__
+
+#include <linux/types.h>
+#include <asm/system.h>
+
+typedef struct { volatile int counter; } atomic_t;
+typedef struct { volatile __s64 counter; } atomic64_t;
+
+#define ATOMIC_INIT(i)		{ (i) }
+#define ATOMIC64_INIT(i)	{ (i) }
+
+#define atomic_read(v)		((v)->counter)
+#define atomic64_read(v)	((v)->counter)
+
+#define atomic_set(v, i)	(((v)->counter) = i)
+#define atomic64_set(v, i)	(((v)->counter) = i)
+
+extern void atomic_add(int, atomic_t *);
+extern void atomic64_add(int, atomic64_t *);
+extern void atomic_sub(int, atomic_t *);
+extern void atomic64_sub(int, atomic64_t *);
+
+extern int atomic_add_ret(int, atomic_t *);
+extern int atomic64_add_ret(int, atomic64_t *);
+extern int atomic_sub_ret(int, atomic_t *);
+extern int atomic64_sub_ret(int, atomic64_t *);
+
+#define atomic_dec_return(v) atomic_sub_ret(1, v)
+#define atomic64_dec_return(v) atomic64_sub_ret(1, v)
+
+#define atomic_inc_return(v) atomic_add_ret(1, v)
+#define atomic64_inc_return(v) atomic64_add_ret(1, v)
+
+#define atomic_sub_return(i, v) atomic_sub_ret(i, v)
+#define atomic64_sub_return(i, v) atomic64_sub_ret(i, v)
+
+#define atomic_add_return(i, v) atomic_add_ret(i, v)
+#define atomic64_add_return(i, v) atomic64_add_ret(i, v)
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0)
+
+#define atomic_sub_and_test(i, v) (atomic_sub_ret(i, v) == 0)
+#define atomic64_sub_and_test(i, v) (atomic64_sub_ret(i, v) == 0)
+
+#define atomic_dec_and_test(v) (atomic_sub_ret(1, v) == 0)
+#define atomic64_dec_and_test(v) (atomic64_sub_ret(1, v) == 0)
+
+#define atomic_inc(v) atomic_add(1, v)
+#define atomic64_inc(v) atomic64_add(1, v)
+
+#define atomic_dec(v) atomic_sub(1, v)
+#define atomic64_dec(v) atomic64_sub(1, v)
+
+#define atomic_add_negative(i, v) (atomic_add_ret(i, v) < 0)
+#define atomic64_add_negative(i, v) (atomic64_add_ret(i, v) < 0)
+
+#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+	c = atomic_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#define atomic64_cmpxchg(v, o, n) \
+	((__typeof__((v)->counter))cmpxchg(&((v)->counter), (o), (n)))
+#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+
+static inline int atomic64_add_unless(atomic64_t *v, long a, long u)
+{
+	long c, old;
+	c = atomic64_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic64_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
+
+/* Atomic operations are already serializing */
+#ifdef CONFIG_SMP
+#define smp_mb__before_atomic_dec()	membar_storeload_loadload();
+#define smp_mb__after_atomic_dec()	membar_storeload_storestore();
+#define smp_mb__before_atomic_inc()	membar_storeload_loadload();
+#define smp_mb__after_atomic_inc()	membar_storeload_storestore();
+#else
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+#endif
+
+#include <asm-generic/atomic.h>
+#endif /* !(__ARCH_SPARC64_ATOMIC__) */
diff --git a/arch/sparc/include/asm/auxio.h b/arch/sparc/include/asm/auxio.h
new file mode 100644
index 0000000..13dc67f
--- /dev/null
+++ b/arch/sparc/include/asm/auxio.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_AUXIO_H
+#define ___ASM_SPARC_AUXIO_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/auxio_64.h>
+#else
+#include <asm/auxio_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/auxio_32.h b/arch/sparc/include/asm/auxio_32.h
new file mode 100644
index 0000000..e03e088
--- /dev/null
+++ b/arch/sparc/include/asm/auxio_32.h
@@ -0,0 +1,89 @@
+/*
+ * auxio.h:  Definitions and code for the Auxiliary I/O register.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_AUXIO_H
+#define _SPARC_AUXIO_H
+
+#include <asm/system.h>
+#include <asm/vaddrs.h>
+
+/* This register is an unsigned char in IO space.  It does two things.
+ * First, it is used to control the front panel LED light on machines
+ * that have it (good for testing entry points to trap handlers and irq's)
+ * Secondly, it controls various floppy drive parameters.
+ */
+#define AUXIO_ORMEIN      0xf0    /* All writes must set these bits. */
+#define AUXIO_ORMEIN4M    0xc0    /* sun4m - All writes must set these bits. */
+#define AUXIO_FLPY_DENS   0x20    /* Floppy density, high if set. Read only. */
+#define AUXIO_FLPY_DCHG   0x10    /* A disk change occurred.  Read only. */
+#define AUXIO_EDGE_ON     0x10    /* sun4m - On means Jumper block is in. */
+#define AUXIO_FLPY_DSEL   0x08    /* Drive select/start-motor. Write only. */
+#define AUXIO_LINK_TEST   0x08    /* sun4m - On means TPE Carrier detect. */
+
+/* Set the following to one, then zero, after doing a pseudo DMA transfer. */
+#define AUXIO_FLPY_TCNT   0x04    /* Floppy terminal count. Write only. */
+
+/* Set the following to zero to eject the floppy. */
+#define AUXIO_FLPY_EJCT   0x02    /* Eject floppy disk.  Write only. */
+#define AUXIO_LED         0x01    /* On if set, off if unset. Read/Write */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * NOTE: these routines are implementation dependent--
+ * understand the hardware you are querying!
+ */
+extern void set_auxio(unsigned char bits_on, unsigned char bits_off);
+extern unsigned char get_auxio(void); /* .../asm/floppy.h */
+
+/*
+ * The following routines are provided for driver-compatibility
+ * with sparc64 (primarily sunlance.c)
+ */
+
+#define AUXIO_LTE_ON    1
+#define AUXIO_LTE_OFF   0
+
+/* auxio_set_lte - Set Link Test Enable (TPE Link Detect)
+ *
+ * on - AUXIO_LTE_ON or AUXIO_LTE_OFF
+ */
+#define auxio_set_lte(on) \
+do { \
+	if(on) { \
+		set_auxio(AUXIO_LINK_TEST, 0); \
+	} else { \
+		set_auxio(0, AUXIO_LINK_TEST); \
+	} \
+} while (0)
+
+#define AUXIO_LED_ON    1
+#define AUXIO_LED_OFF   0
+
+/* auxio_set_led - Set system front panel LED
+ *
+ * on - AUXIO_LED_ON or AUXIO_LED_OFF
+ */
+#define auxio_set_led(on) \
+do { \
+	if(on) { \
+		set_auxio(AUXIO_LED, 0); \
+	} else { \
+		set_auxio(0, AUXIO_LED); \
+	} \
+} while (0)
+
+#endif /* !(__ASSEMBLY__) */
+
+
+/* AUXIO2 (Power Off Control) */
+extern __volatile__ unsigned char * auxio_power_register;
+
+#define	AUXIO_POWER_DETECT_FAILURE	32
+#define	AUXIO_POWER_CLEAR_FAILURE	2
+#define	AUXIO_POWER_OFF			1
+
+
+#endif /* !(_SPARC_AUXIO_H) */
diff --git a/arch/sparc/include/asm/auxio_64.h b/arch/sparc/include/asm/auxio_64.h
new file mode 100644
index 0000000..f61cd1e
--- /dev/null
+++ b/arch/sparc/include/asm/auxio_64.h
@@ -0,0 +1,100 @@
+/*
+ * auxio.h:  Definitions and code for the Auxiliary I/O registers.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * Refactoring for unified NCR/PCIO support 2002 Eric Brower (ebrower@usa.net)
+ */
+#ifndef _SPARC64_AUXIO_H
+#define _SPARC64_AUXIO_H
+
+/* AUXIO implementations:
+ * sbus-based NCR89C105 "Slavio"
+ *	LED/Floppy (AUX1) register
+ *	Power (AUX2) register
+ *
+ * ebus-based auxio on PCIO
+ *	LED Auxio Register
+ *	Power Auxio Register
+ *
+ * Register definitions from NCR _NCR89C105 Chip Specification_
+ *
+ * SLAVIO AUX1 @ 0x1900000
+ * -------------------------------------------------
+ * | (R) | (R) |  D  | (R) |  E  |  M  |  T  |  L  |
+ * -------------------------------------------------
+ * (R) - bit 7:6,4 are reserved and should be masked in s/w
+ *  D  - Floppy Density Sense (1=high density) R/O
+ *  E  - Link Test Enable, directly reflected on AT&T 7213 LTE pin
+ *  M  - Monitor/Mouse Mux, directly reflected on MON_MSE_MUX pin
+ *  T  - Terminal Count: sends TC pulse to 82077 floppy controller
+ *  L  - System LED on front panel (0=off, 1=on)
+ */
+#define AUXIO_AUX1_MASK		0xc0 /* Mask bits 		*/
+#define AUXIO_AUX1_FDENS	0x20 /* Floppy Density Sense	*/
+#define AUXIO_AUX1_LTE 		0x08 /* Link Test Enable 	*/
+#define AUXIO_AUX1_MMUX		0x04 /* Monitor/Mouse Mux	*/
+#define AUXIO_AUX1_FTCNT	0x02 /* Terminal Count, 	*/
+#define AUXIO_AUX1_LED		0x01 /* System LED		*/
+
+/* SLAVIO AUX2 @ 0x1910000
+ * -------------------------------------------------
+ * | (R) | (R) |  D  | (R) | (R) | (R) |  C  |  F  |
+ * -------------------------------------------------
+ * (R) - bits 7:6,4:2 are reserved and should be masked in s/w
+ *  D  - Power Failure Detect (1=power fail)
+ *  C  - Clear Power Failure Detect Int (1=clear)
+ *  F  - Power Off (1=power off)
+ */
+#define AUXIO_AUX2_MASK		0xdc /* Mask Bits		*/
+#define AUXIO_AUX2_PFAILDET	0x20 /* Power Fail Detect	*/
+#define AUXIO_AUX2_PFAILCLR 	0x02 /* Clear Pwr Fail Det Intr	*/
+#define AUXIO_AUX2_PWR_OFF	0x01 /* Power Off		*/
+
+/* Register definitions from Sun Microsystems _PCIO_ p/n 802-7837
+ *
+ * PCIO LED Auxio @ 0x726000
+ * -------------------------------------------------
+ * |             31:1 Unused                 | LED |
+ * -------------------------------------------------
+ * Bits 31:1 unused
+ * LED - System LED on front panel (0=off, 1=on)
+ */
+#define AUXIO_PCIO_LED		0x01 /* System LED 		*/
+
+/* PCIO Power Auxio @ 0x724000
+ * -------------------------------------------------
+ * |             31:2 Unused           | CPO | SPO |
+ * -------------------------------------------------
+ * Bits 31:2 unused
+ * CPO - Courtesy Power Off (1=off)
+ * SPO - System Power Off   (1=off)
+ */
+#define AUXIO_PCIO_CPWR_OFF	0x02 /* Courtesy Power Off	*/
+#define AUXIO_PCIO_SPWR_OFF	0x01 /* System Power Off	*/
+
+#ifndef __ASSEMBLY__
+
+extern void __iomem *auxio_register;
+
+#define AUXIO_LTE_ON	1
+#define AUXIO_LTE_OFF	0
+
+/* auxio_set_lte - Set Link Test Enable (TPE Link Detect)
+ *
+ * on - AUXIO_LTE_ON or AUXIO_LTE_OFF
+ */
+extern void auxio_set_lte(int on);
+
+#define AUXIO_LED_ON	1
+#define AUXIO_LED_OFF	0
+
+/* auxio_set_led - Set system front panel LED
+ *
+ * on - AUXIO_LED_ON or AUXIO_LED_OFF
+ */
+extern void auxio_set_led(int on);
+
+#endif /* ifndef __ASSEMBLY__ */
+
+#endif /* !(_SPARC64_AUXIO_H) */
diff --git a/arch/sparc/include/asm/auxvec.h b/arch/sparc/include/asm/auxvec.h
new file mode 100644
index 0000000..ad6f360
--- /dev/null
+++ b/arch/sparc/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef __ASMSPARC_AUXVEC_H
+#define __ASMSPARC_AUXVEC_H
+
+#endif /* !(__ASMSPARC_AUXVEC_H) */
diff --git a/arch/sparc/include/asm/backoff.h b/arch/sparc/include/asm/backoff.h
new file mode 100644
index 0000000..fa1fdf6
--- /dev/null
+++ b/arch/sparc/include/asm/backoff.h
@@ -0,0 +1,31 @@
+#ifndef _SPARC64_BACKOFF_H
+#define _SPARC64_BACKOFF_H
+
+#define BACKOFF_LIMIT	(4 * 1024)
+
+#ifdef CONFIG_SMP
+
+#define BACKOFF_SETUP(reg)	\
+	mov	1, reg
+
+#define BACKOFF_SPIN(reg, tmp, label)	\
+	mov	reg, tmp; \
+88:	brnz,pt	tmp, 88b; \
+	 sub	tmp, 1, tmp; \
+	set	BACKOFF_LIMIT, tmp; \
+	cmp	reg, tmp; \
+	bg,pn	%xcc, label; \
+	 nop; \
+	ba,pt	%xcc, label; \
+	 sllx	reg, 1, reg;
+
+#else
+
+#define BACKOFF_SETUP(reg)
+#define BACKOFF_SPIN(reg, tmp, label) \
+	ba,pt	%xcc, label; \
+	 nop;
+
+#endif
+
+#endif /* _SPARC64_BACKOFF_H */
diff --git a/arch/sparc/include/asm/bbc.h b/arch/sparc/include/asm/bbc.h
new file mode 100644
index 0000000..423a858
--- /dev/null
+++ b/arch/sparc/include/asm/bbc.h
@@ -0,0 +1,225 @@
+/*
+ * bbc.h: Defines for BootBus Controller found on UltraSPARC-III
+ *        systems.
+ *
+ * Copyright (C) 2000 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _SPARC64_BBC_H
+#define _SPARC64_BBC_H
+
+/* Register sizes are indicated by "B" (Byte, 1-byte),
+ * "H" (Half-word, 2 bytes), "W" (Word, 4 bytes) or
+ * "Q" (Quad, 8 bytes) inside brackets.
+ */
+
+#define BBC_AID		0x00	/* [B] Agent ID			*/
+#define BBC_DEVP	0x01	/* [B] Device Present		*/
+#define BBC_ARB		0x02	/* [B] Arbitration		*/
+#define BBC_QUIESCE	0x03	/* [B] Quiesce			*/
+#define BBC_WDACTION	0x04	/* [B] Watchdog Action		*/
+#define BBC_SPG		0x06	/* [B] Soft POR Gen		*/
+#define BBC_SXG		0x07	/* [B] Soft XIR Gen		*/
+#define BBC_PSRC	0x08	/* [W] POR Source		*/
+#define BBC_XSRC	0x0c	/* [B] XIR Source		*/
+#define BBC_CSC		0x0d	/* [B] Clock Synthesizers Control*/
+#define BBC_ES_CTRL	0x0e	/* [H] Energy Star Control	*/
+#define BBC_ES_ACT	0x10	/* [W] E* Assert Change Time	*/
+#define BBC_ES_DACT	0x14	/* [B] E* De-Assert Change Time	*/
+#define BBC_ES_DABT	0x15	/* [B] E* De-Assert Bypass Time	*/
+#define BBC_ES_ABT	0x16	/* [H] E* Assert Bypass Time	*/
+#define BBC_ES_PST	0x18	/* [W] E* PLL Settle Time	*/
+#define BBC_ES_FSL	0x1c	/* [W] E* Frequency Switch Latency*/
+#define BBC_EBUST	0x20	/* [Q] EBUS Timing		*/
+#define BBC_JTAG_CMD	0x28	/* [W] JTAG+ Command		*/
+#define BBC_JTAG_CTRL	0x2c	/* [B] JTAG+ Control		*/
+#define BBC_I2C_SEL	0x2d	/* [B] I2C Selection		*/
+#define BBC_I2C_0_S1	0x2e	/* [B] I2C ctrlr-0 reg S1	*/
+#define BBC_I2C_0_S0	0x2f	/* [B] I2C ctrlr-0 regs S0,S0',S2,S3*/
+#define BBC_I2C_1_S1	0x30	/* [B] I2C ctrlr-1 reg S1	*/
+#define BBC_I2C_1_S0	0x31	/* [B] I2C ctrlr-1 regs S0,S0',S2,S3*/
+#define BBC_KBD_BEEP	0x32	/* [B] Keyboard Beep		*/
+#define BBC_KBD_BCNT	0x34	/* [W] Keyboard Beep Counter	*/
+
+#define BBC_REGS_SIZE	0x40
+
+/* There is a 2K scratch ram area at offset 0x80000 but I doubt
+ * we will use it for anything.
+ */
+
+/* Agent ID register.  This register shows the Safari Agent ID
+ * for the processors.  The value returned depends upon which
+ * cpu is reading the register.
+ */
+#define BBC_AID_ID	0x07	/* Safari ID		*/
+#define BBC_AID_RESV	0xf8	/* Reserved		*/
+
+/* Device Present register.  One can determine which cpus are actually
+ * present in the machine by interrogating this register.
+ */
+#define BBC_DEVP_CPU0	0x01	/* Processor 0 present	*/
+#define BBC_DEVP_CPU1	0x02	/* Processor 1 present	*/
+#define BBC_DEVP_CPU2	0x04	/* Processor 2 present	*/
+#define BBC_DEVP_CPU3	0x08	/* Processor 3 present	*/
+#define BBC_DEVP_RESV	0xf0	/* Reserved		*/
+
+/* Arbitration register.  This register is used to block access to
+ * the BBC from a particular cpu.
+ */
+#define BBC_ARB_CPU0	0x01	/* Enable cpu 0 BBC arbitratrion */
+#define BBC_ARB_CPU1	0x02	/* Enable cpu 1 BBC arbitratrion */
+#define BBC_ARB_CPU2	0x04	/* Enable cpu 2 BBC arbitratrion */
+#define BBC_ARB_CPU3	0x08	/* Enable cpu 3 BBC arbitratrion */
+#define BBC_ARB_RESV	0xf0	/* Reserved			 */
+
+/* Quiesce register.  Bus and BBC segments for cpus can be disabled
+ * with this register, ie. for hot plugging.
+ */
+#define BBC_QUIESCE_S02	0x01	/* Quiesce Safari segment for cpu 0 and 2 */
+#define BBC_QUIESCE_S13	0x02	/* Quiesce Safari segment for cpu 1 and 3 */
+#define BBC_QUIESCE_B02	0x04	/* Quiesce BBC segment for cpu 0 and 2    */
+#define BBC_QUIESCE_B13	0x08	/* Quiesce BBC segment for cpu 1 and 3    */
+#define BBC_QUIESCE_FD0 0x10	/* Disable Fatal_Error[0] reporting	  */
+#define BBC_QUIESCE_FD1 0x20	/* Disable Fatal_Error[1] reporting	  */
+#define BBC_QUIESCE_FD2 0x40	/* Disable Fatal_Error[2] reporting	  */
+#define BBC_QUIESCE_FD3 0x80	/* Disable Fatal_Error[3] reporting	  */
+
+/* Watchdog Action register.  When the watchdog device timer expires
+ * a line is enabled to the BBC.  The action BBC takes when this line
+ * is asserted can be controlled by this regiser.
+ */
+#define BBC_WDACTION_RST  0x01	/* When set, watchdog causes system reset.
+				 * When clear, BBC ignores watchdog signal.
+				 */
+#define BBC_WDACTION_RESV 0xfe	/* Reserved */
+
+/* Soft_POR_GEN register.  The POR (Power On Reset) signal may be asserted
+ * for specific processors or all processors via this register.
+ */
+#define BBC_SPG_CPU0	0x01 /* Assert POR for processor 0	*/
+#define BBC_SPG_CPU1	0x02 /* Assert POR for processor 1	*/
+#define BBC_SPG_CPU2	0x04 /* Assert POR for processor 2	*/
+#define BBC_SPG_CPU3	0x08 /* Assert POR for processor 3	*/
+#define BBC_SPG_CPUALL	0x10 /* Reset all processors and reset
+			      * the entire system.
+			      */
+#define BBC_SPG_RESV	0xe0 /* Reserved			*/
+
+/* Soft_XIR_GEN register.  The XIR (eXternally Initiated Reset) signal
+ * may be asserted to specific processors via this register.
+ */
+#define BBC_SXG_CPU0	0x01 /* Assert XIR for processor 0	*/
+#define BBC_SXG_CPU1	0x02 /* Assert XIR for processor 1	*/
+#define BBC_SXG_CPU2	0x04 /* Assert XIR for processor 2	*/
+#define BBC_SXG_CPU3	0x08 /* Assert XIR for processor 3	*/
+#define BBC_SXG_RESV	0xf0 /* Reserved			*/
+
+/* POR Source register.  One may identify the cause of the most recent
+ * reset by reading this register.
+ */
+#define BBC_PSRC_SPG0	0x0001 /* CPU 0 reset via BBC_SPG register	*/
+#define BBC_PSRC_SPG1	0x0002 /* CPU 1 reset via BBC_SPG register	*/
+#define BBC_PSRC_SPG2	0x0004 /* CPU 2 reset via BBC_SPG register	*/
+#define BBC_PSRC_SPG3	0x0008 /* CPU 3 reset via BBC_SPG register	*/
+#define BBC_PSRC_SPGSYS	0x0010 /* System reset via BBC_SPG register	*/
+#define BBC_PSRC_JTAG	0x0020 /* System reset via JTAG+		*/
+#define BBC_PSRC_BUTTON	0x0040 /* System reset via push-button dongle	*/
+#define BBC_PSRC_PWRUP	0x0080 /* System reset via power-up		*/
+#define BBC_PSRC_FE0	0x0100 /* CPU 0 reported Fatal_Error		*/
+#define BBC_PSRC_FE1	0x0200 /* CPU 1 reported Fatal_Error		*/
+#define BBC_PSRC_FE2	0x0400 /* CPU 2 reported Fatal_Error		*/
+#define BBC_PSRC_FE3	0x0800 /* CPU 3 reported Fatal_Error		*/
+#define BBC_PSRC_FE4	0x1000 /* Schizo reported Fatal_Error		*/
+#define BBC_PSRC_FE5	0x2000 /* Safari device 5 reported Fatal_Error	*/
+#define BBC_PSRC_FE6	0x4000 /* CPMS reported Fatal_Error		*/
+#define BBC_PSRC_SYNTH	0x8000 /* System reset when on-board clock synthesizers
+				* were updated.
+				*/
+#define BBC_PSRC_WDT   0x10000 /* System reset via Super I/O watchdog	*/
+#define BBC_PSRC_RSC   0x20000 /* System reset via RSC remote monitoring
+				* device
+				*/
+
+/* XIR Source register.  The source of an XIR event sent to a processor may
+ * be determined via this register.
+ */
+#define BBC_XSRC_SXG0	0x01	/* CPU 0 received XIR via Soft_XIR_GEN reg */
+#define BBC_XSRC_SXG1	0x02	/* CPU 1 received XIR via Soft_XIR_GEN reg */
+#define BBC_XSRC_SXG2	0x04	/* CPU 2 received XIR via Soft_XIR_GEN reg */
+#define BBC_XSRC_SXG3	0x08	/* CPU 3 received XIR via Soft_XIR_GEN reg */
+#define BBC_XSRC_JTAG	0x10	/* All CPUs received XIR via JTAG+         */
+#define BBC_XSRC_W_OR_B	0x20	/* All CPUs received XIR either because:
+				 * a) Super I/O watchdog fired, or
+				 * b) XIR push button was activated
+				 */
+#define BBC_XSRC_RESV	0xc0	/* Reserved				   */
+
+/* Clock Synthesizers Control register.  This register provides the big-bang
+ * programming interface to the two clock synthesizers of the machine.
+ */
+#define BBC_CSC_SLOAD	0x01	/* Directly connected to S_LOAD pins	*/
+#define BBC_CSC_SDATA	0x02	/* Directly connected to S_DATA pins	*/
+#define BBC_CSC_SCLOCK	0x04	/* Directly connected to S_CLOCK pins	*/
+#define BBC_CSC_RESV	0x78	/* Reserved				*/
+#define BBC_CSC_RST	0x80	/* Generate system reset when S_LOAD==1	*/
+
+/* Energy Star Control register.  This register is used to generate the
+ * clock frequency change trigger to the main system devices (Schizo and
+ * the processors).  The transition occurs when bits in this register
+ * go from 0 to 1, only one bit must be set at once else no action
+ * occurs.  Basically the sequence of events is:
+ * a) Choose new frequency: full, 1/2 or 1/32
+ * b) Program this desired frequency into the cpus and Schizo.
+ * c) Set the same value in this register.
+ * d) 16 system clocks later, clear this register.
+ */
+#define BBC_ES_CTRL_1_1		0x01	/* Full frequency	*/
+#define BBC_ES_CTRL_1_2		0x02	/* 1/2 frequency	*/
+#define BBC_ES_CTRL_1_32	0x20	/* 1/32 frequency	*/
+#define BBC_ES_RESV		0xdc	/* Reserved		*/
+
+/* Energy Star Assert Change Time register.  This determines the number
+ * of BBC clock cycles (which is half the system frequency) between
+ * the detection of FREEZE_ACK being asserted and the assertion of
+ * the CLK_CHANGE_L[2:0] signals.
+ */
+#define BBC_ES_ACT_VAL	0xff
+
+/* Energy Star Assert Bypass Time register.  This determines the number
+ * of BBC clock cycles (which is half the system frequency) between
+ * the assertion of the CLK_CHANGE_L[2:0] signals and the assertion of
+ * the ESTAR_PLL_BYPASS signal.
+ */
+#define BBC_ES_ABT_VAL	0xffff
+
+/* Energy Star PLL Settle Time register.  This determines the number of
+ * BBC clock cycles (which is half the system frequency) between the
+ * de-assertion of CLK_CHANGE_L[2:0] and the de-assertion of the FREEZE_L
+ * signal.
+ */
+#define BBC_ES_PST_VAL	0xffffffff
+
+/* Energy Star Frequency Switch Latency register.  This is the number of
+ * BBC clocks between the de-assertion of CLK_CHANGE_L[2:0] and the first
+ * edge of the Safari clock at the new frequency.
+ */
+#define BBC_ES_FSL_VAL	0xffffffff
+
+/* Keyboard Beep control register.  This is a simple enabler for the audio
+ * beep sound.
+ */
+#define BBC_KBD_BEEP_ENABLE	0x01 /* Enable beep	*/
+#define BBC_KBD_BEEP_RESV	0xfe /* Reserved	*/
+
+/* Keyboard Beep Counter register.  There is a free-running counter inside
+ * the BBC which runs at half the system clock.  The bit set in this register
+ * determines when the audio sound is generated.  So for example if bit
+ * 10 is set, the audio beep will oscillate at 1/(2**12).  The keyboard beep
+ * generator automatically selects a different bit to use if the system clock
+ * is changed via Energy Star.
+ */
+#define BBC_KBD_BCNT_BITS	0x0007fc00
+#define BBC_KBC_BCNT_RESV	0xfff803ff
+
+#endif /* _SPARC64_BBC_H */
+
diff --git a/arch/sparc/include/asm/bitext.h b/arch/sparc/include/asm/bitext.h
new file mode 100644
index 0000000..297b2f2
--- /dev/null
+++ b/arch/sparc/include/asm/bitext.h
@@ -0,0 +1,27 @@
+/*
+ * bitext.h: Bit string operations on the sparc, specific to architecture.
+ *
+ * Copyright 2002 Pete Zaitcev <zaitcev@yahoo.com>
+ */
+
+#ifndef _SPARC_BITEXT_H
+#define _SPARC_BITEXT_H
+
+#include <linux/spinlock.h>
+
+struct bit_map {
+	spinlock_t lock;
+	unsigned long *map;
+	int size;
+	int used;
+	int last_off;
+	int last_size;
+	int first_free;
+	int num_colors;
+};
+
+extern int bit_map_string_get(struct bit_map *t, int len, int align);
+extern void bit_map_clear(struct bit_map *t, int offset, int len);
+extern void bit_map_init(struct bit_map *t, unsigned long *map, int size);
+
+#endif /* defined(_SPARC_BITEXT_H) */
diff --git a/arch/sparc/include/asm/bitops.h b/arch/sparc/include/asm/bitops.h
new file mode 100644
index 0000000..b1edd94
--- /dev/null
+++ b/arch/sparc/include/asm/bitops.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_BITOPS_H
+#define ___ASM_SPARC_BITOPS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/bitops_64.h>
+#else
+#include <asm/bitops_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/bitops_32.h b/arch/sparc/include/asm/bitops_32.h
new file mode 100644
index 0000000..68b98a7e
--- /dev/null
+++ b/arch/sparc/include/asm/bitops_32.h
@@ -0,0 +1,111 @@
+/*
+ * bitops.h: Bit string operations on the Sparc.
+ *
+ * Copyright 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright 1996 Eddie C. Dost   (ecd@skynet.be)
+ * Copyright 2001 Anton Blanchard (anton@samba.org)
+ */
+
+#ifndef _SPARC_BITOPS_H
+#define _SPARC_BITOPS_H
+
+#include <linux/compiler.h>
+#include <asm/byteorder.h>
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+extern unsigned long ___set_bit(unsigned long *addr, unsigned long mask);
+extern unsigned long ___clear_bit(unsigned long *addr, unsigned long mask);
+extern unsigned long ___change_bit(unsigned long *addr, unsigned long mask);
+
+/*
+ * Set bit 'nr' in 32-bit quantity at address 'addr' where bit '0'
+ * is in the highest of the four bytes and bit '31' is the high bit
+ * within the first byte. Sparc is BIG-Endian. Unless noted otherwise
+ * all bit-ops return 0 if bit was previously clear and != 0 otherwise.
+ */
+static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long *ADDR, mask;
+
+	ADDR = ((unsigned long *) addr) + (nr >> 5);
+	mask = 1 << (nr & 31);
+
+	return ___set_bit(ADDR, mask) != 0;
+}
+
+static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long *ADDR, mask;
+
+	ADDR = ((unsigned long *) addr) + (nr >> 5);
+	mask = 1 << (nr & 31);
+
+	(void) ___set_bit(ADDR, mask);
+}
+
+static inline int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long *ADDR, mask;
+
+	ADDR = ((unsigned long *) addr) + (nr >> 5);
+	mask = 1 << (nr & 31);
+
+	return ___clear_bit(ADDR, mask) != 0;
+}
+
+static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long *ADDR, mask;
+
+	ADDR = ((unsigned long *) addr) + (nr >> 5);
+	mask = 1 << (nr & 31);
+
+	(void) ___clear_bit(ADDR, mask);
+}
+
+static inline int test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long *ADDR, mask;
+
+	ADDR = ((unsigned long *) addr) + (nr >> 5);
+	mask = 1 << (nr & 31);
+
+	return ___change_bit(ADDR, mask) != 0;
+}
+
+static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long *ADDR, mask;
+
+	ADDR = ((unsigned long *) addr) + (nr >> 5);
+	mask = 1 << (nr & 31);
+
+	(void) ___change_bit(ADDR, mask);
+}
+
+#include <asm-generic/bitops/non-atomic.h>
+
+#define smp_mb__before_clear_bit()	do { } while(0)
+#define smp_mb__after_clear_bit()	do { } while(0)
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* defined(_SPARC_BITOPS_H) */
diff --git a/arch/sparc/include/asm/bitops_64.h b/arch/sparc/include/asm/bitops_64.h
new file mode 100644
index 0000000..bb87b80
--- /dev/null
+++ b/arch/sparc/include/asm/bitops_64.h
@@ -0,0 +1,107 @@
+/*
+ * bitops.h: Bit string operations on the V9.
+ *
+ * Copyright 1996, 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC64_BITOPS_H
+#define _SPARC64_BITOPS_H
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+#include <asm/byteorder.h>
+
+extern int test_and_set_bit(unsigned long nr, volatile unsigned long *addr);
+extern int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr);
+extern int test_and_change_bit(unsigned long nr, volatile unsigned long *addr);
+extern void set_bit(unsigned long nr, volatile unsigned long *addr);
+extern void clear_bit(unsigned long nr, volatile unsigned long *addr);
+extern void change_bit(unsigned long nr, volatile unsigned long *addr);
+
+#include <asm-generic/bitops/non-atomic.h>
+
+#ifdef CONFIG_SMP
+#define smp_mb__before_clear_bit()	membar_storeload_loadload()
+#define smp_mb__after_clear_bit()	membar_storeload_storestore()
+#else
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+#endif
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/ffs.h>
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#ifdef ULTRA_HAS_POPULATION_COUNT
+
+static inline unsigned int hweight64(unsigned long w)
+{
+	unsigned int res;
+
+	__asm__ ("popc %1,%0" : "=r" (res) : "r" (w));
+	return res;
+}
+
+static inline unsigned int hweight32(unsigned int w)
+{
+	unsigned int res;
+
+	__asm__ ("popc %1,%0" : "=r" (res) : "r" (w & 0xffffffff));
+	return res;
+}
+
+static inline unsigned int hweight16(unsigned int w)
+{
+	unsigned int res;
+
+	__asm__ ("popc %1,%0" : "=r" (res) : "r" (w & 0xffff));
+	return res;
+}
+
+static inline unsigned int hweight8(unsigned int w)
+{
+	unsigned int res;
+
+	__asm__ ("popc %1,%0" : "=r" (res) : "r" (w & 0xff));
+	return res;
+}
+
+#else
+
+#include <asm-generic/bitops/hweight.h>
+
+#endif
+#include <asm-generic/bitops/lock.h>
+#endif /* __KERNEL__ */
+
+#include <asm-generic/bitops/find.h>
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/ext2-non-atomic.h>
+
+#define ext2_set_bit_atomic(lock,nr,addr) \
+	test_and_set_bit((nr) ^ 0x38,(unsigned long *)(addr))
+#define ext2_clear_bit_atomic(lock,nr,addr) \
+	test_and_clear_bit((nr) ^ 0x38,(unsigned long *)(addr))
+
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* defined(_SPARC64_BITOPS_H) */
diff --git a/arch/sparc/include/asm/bpp.h b/arch/sparc/include/asm/bpp.h
new file mode 100644
index 0000000..31f515e
--- /dev/null
+++ b/arch/sparc/include/asm/bpp.h
@@ -0,0 +1,73 @@
+#ifndef _SPARC_BPP_H
+#define _SPARC_BPP_H
+
+/*
+ * Copyright (c) 1995 Picture Elements
+ *	Stephen Williams
+ *	Gus Baldauf
+ *
+ * Linux/SPARC port by Peter Zaitcev.
+ * Integration into SPARC tree by Tom Dyas.
+ */
+
+#include  <linux/ioctl.h>
+
+/*
+ * This is a driver that supports IEEE Std 1284-1994 communications
+ * with compliant or compatible devices. It will use whatever features
+ * the device supports, prefering those that are typically faster.
+ *
+ * When the device is opened, it is left in COMPATIBILITY mode, and
+ * writes work like any printer device. The driver only attempt to
+ * negotiate 1284 modes when needed so that plugs can be pulled,
+ * switch boxes switched, etc., without disrupting things. It will
+ * also leave the device in compatibility mode when closed.
+ */
+
+
+
+/*
+ * This driver also supplies ioctls to manually manipulate the
+ * pins. This is great for testing devices, or writing code to deal
+ * with bizzarro-mode of the ACME Special TurboThingy Plus.
+ *
+ * NOTE: These ioctl currently do not interact well with
+ * read/write. Caveat emptor.
+ *
+ * PUT_PINS allows us to assign the sense of all the pins, including
+ * the data pins if being driven by the host. The GET_PINS returns the
+ * pins that the peripheral drives, including data if appropriate.
+ */
+
+# define BPP_PUT_PINS _IOW('B', 1, int)
+# define BPP_GET_PINS _IOR('B', 2, char) /* that's bogus - should've been _IO */
+# define BPP_PUT_DATA _IOW('B', 3, int)
+# define BPP_GET_DATA _IOR('B', 4, char) /* ditto */
+
+/*
+ * Set the data bus to input mode. Disengage the data bin driver and
+ * be prepared to read values from the peripheral. If the arg is 0,
+ * then revert the bus to output mode.
+ */
+# define BPP_SET_INPUT _IOW('B', 5, int)
+
+/*
+ * These bits apply to the PUT operation...
+ */
+# define BPP_PP_nStrobe   0x0001
+# define BPP_PP_nAutoFd   0x0002
+# define BPP_PP_nInit     0x0004
+# define BPP_PP_nSelectIn 0x0008
+
+/*
+ * These apply to the GET operation, which also reads the current value
+ * of the previously put values. A bit mask of these will be returned
+ * as a bit mask in the return code of the ioctl().
+ */
+# define BPP_GP_nAck   0x0100
+# define BPP_GP_Busy   0x0200
+# define BPP_GP_PError 0x0400
+# define BPP_GP_Select 0x0800
+# define BPP_GP_nFault 0x1000
+
+#endif
diff --git a/arch/sparc/include/asm/btfixup.h b/arch/sparc/include/asm/btfixup.h
new file mode 100644
index 0000000..797722c
--- /dev/null
+++ b/arch/sparc/include/asm/btfixup.h
@@ -0,0 +1,208 @@
+/*
+ *  asm/btfixup.h:    Macros for boot time linking.
+ *
+ *  Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+ 
+#ifndef _SPARC_BTFIXUP_H
+#define _SPARC_BTFIXUP_H
+
+#include <linux/init.h>
+
+#ifndef __ASSEMBLY__
+
+#ifdef MODULE
+extern unsigned int ___illegal_use_of_BTFIXUP_SIMM13_in_module(void);
+extern unsigned int ___illegal_use_of_BTFIXUP_SETHI_in_module(void);
+extern unsigned int ___illegal_use_of_BTFIXUP_HALF_in_module(void);
+extern unsigned int ___illegal_use_of_BTFIXUP_INT_in_module(void);
+
+#define BTFIXUP_SIMM13(__name) ___illegal_use_of_BTFIXUP_SIMM13_in_module()
+#define BTFIXUP_HALF(__name) ___illegal_use_of_BTFIXUP_HALF_in_module()
+#define BTFIXUP_SETHI(__name) ___illegal_use_of_BTFIXUP_SETHI_in_module()
+#define BTFIXUP_INT(__name) ___illegal_use_of_BTFIXUP_INT_in_module()
+#define BTFIXUP_BLACKBOX(__name) ___illegal_use_of_BTFIXUP_BLACKBOX_in_module
+
+#else
+
+#define BTFIXUP_SIMM13(__name) ___sf_##__name()
+#define BTFIXUP_HALF(__name) ___af_##__name()
+#define BTFIXUP_SETHI(__name) ___hf_##__name()
+#define BTFIXUP_INT(__name) ((unsigned int)&___i_##__name)
+/* This must be written in assembly and present in a sethi */
+#define BTFIXUP_BLACKBOX(__name) ___b_##__name
+#endif /* MODULE */
+
+/* Fixup call xx */
+
+#define BTFIXUPDEF_CALL(__type, __name, __args...) 					\
+	extern __type ___f_##__name(__args);						\
+	extern unsigned ___fs_##__name[3];
+#define BTFIXUPDEF_CALL_CONST(__type, __name, __args...) 				\
+	extern __type ___f_##__name(__args) __attribute_const__;			\
+	extern unsigned ___fs_##__name[3];
+#define BTFIXUP_CALL(__name) ___f_##__name
+
+#define BTFIXUPDEF_BLACKBOX(__name)							\
+	extern unsigned ___bs_##__name[2];
+
+/* Put bottom 13bits into some register variable */
+
+#define BTFIXUPDEF_SIMM13(__name)							\
+	static inline unsigned int ___sf_##__name(void) __attribute_const__;		\
+	extern unsigned ___ss_##__name[2];						\
+	static inline unsigned int ___sf_##__name(void) {				\
+		unsigned int ret;							\
+		__asm__ ("or %%g0, ___s_" #__name ", %0" : "=r"(ret));			\
+		return ret;								\
+	}
+#define BTFIXUPDEF_SIMM13_INIT(__name,__val)						\
+	static inline unsigned int ___sf_##__name(void) __attribute_const__;		\
+	extern unsigned ___ss_##__name[2];						\
+	static inline unsigned int ___sf_##__name(void) {				\
+		unsigned int ret;							\
+		__asm__ ("or %%g0, ___s_" #__name "__btset_" #__val ", %0" : "=r"(ret));\
+		return ret;								\
+	}
+
+/* Put either bottom 13 bits, or upper 22 bits into some register variable
+ * (depending on the value, this will lead into sethi FIX, reg; or
+ * mov FIX, reg; )
+ */
+
+#define BTFIXUPDEF_HALF(__name)								\
+	static inline unsigned int ___af_##__name(void) __attribute_const__;		\
+	extern unsigned ___as_##__name[2];						\
+	static inline unsigned int ___af_##__name(void) {				\
+		unsigned int ret;							\
+		__asm__ ("or %%g0, ___a_" #__name ", %0" : "=r"(ret));			\
+		return ret;								\
+	}
+#define BTFIXUPDEF_HALF_INIT(__name,__val)						\
+	static inline unsigned int ___af_##__name(void) __attribute_const__;		\
+	extern unsigned ___as_##__name[2];						\
+	static inline unsigned int ___af_##__name(void) {				\
+		unsigned int ret;							\
+		__asm__ ("or %%g0, ___a_" #__name "__btset_" #__val ", %0" : "=r"(ret));\
+		return ret;								\
+	}
+
+/* Put upper 22 bits into some register variable */
+
+#define BTFIXUPDEF_SETHI(__name)							\
+	static inline unsigned int ___hf_##__name(void) __attribute_const__;		\
+	extern unsigned ___hs_##__name[2];						\
+	static inline unsigned int ___hf_##__name(void) {				\
+		unsigned int ret;							\
+		__asm__ ("sethi %%hi(___h_" #__name "), %0" : "=r"(ret));		\
+		return ret;								\
+	}
+#define BTFIXUPDEF_SETHI_INIT(__name,__val)						\
+	static inline unsigned int ___hf_##__name(void) __attribute_const__;		\
+	extern unsigned ___hs_##__name[2];						\
+	static inline unsigned int ___hf_##__name(void) {				\
+		unsigned int ret;							\
+		__asm__ ("sethi %%hi(___h_" #__name "__btset_" #__val "), %0" : 	\
+			 "=r"(ret));							\
+		return ret;								\
+	}
+
+/* Put a full 32bit integer into some register variable */
+
+#define BTFIXUPDEF_INT(__name)								\
+	extern unsigned char ___i_##__name;						\
+	extern unsigned ___is_##__name[2];
+
+#define BTFIXUPCALL_NORM	0x00000000			/* Always call */
+#define BTFIXUPCALL_NOP		0x01000000			/* Possibly optimize to nop */
+#define BTFIXUPCALL_RETINT(i)	(0x90102000|((i) & 0x1fff))	/* Possibly optimize to mov i, %o0 */
+#define BTFIXUPCALL_ORINT(i)	(0x90122000|((i) & 0x1fff))	/* Possibly optimize to or %o0, i, %o0 */
+#define BTFIXUPCALL_RETO0	0x01000000			/* Return first parameter, actually a nop */
+#define BTFIXUPCALL_ANDNINT(i)	(0x902a2000|((i) & 0x1fff))	/* Possibly optimize to andn %o0, i, %o0 */
+#define BTFIXUPCALL_SWAPO0O1	0xd27a0000			/* Possibly optimize to swap [%o0],%o1 */
+#define BTFIXUPCALL_SWAPO0G0	0xc07a0000			/* Possibly optimize to swap [%o0],%g0 */
+#define BTFIXUPCALL_SWAPG1G2	0xc4784000			/* Possibly optimize to swap [%g1],%g2 */
+#define BTFIXUPCALL_STG0O0	0xc0220000			/* Possibly optimize to st %g0,[%o0] */
+#define BTFIXUPCALL_STO1O0	0xd2220000			/* Possibly optimize to st %o1,[%o0] */
+
+#define BTFIXUPSET_CALL(__name, __addr, __insn)						\
+	do {										\
+		___fs_##__name[0] |= 1;							\
+		___fs_##__name[1] = (unsigned long)__addr;				\
+		___fs_##__name[2] = __insn;						\
+	} while (0)
+	
+#define BTFIXUPSET_BLACKBOX(__name, __func)						\
+	do {										\
+		___bs_##__name[0] |= 1;							\
+		___bs_##__name[1] = (unsigned long)__func;				\
+	} while (0)
+	
+#define BTFIXUPCOPY_CALL(__name, __from)						\
+	do {										\
+		___fs_##__name[0] |= 1;							\
+		___fs_##__name[1] = ___fs_##__from[1];					\
+		___fs_##__name[2] = ___fs_##__from[2];					\
+	} while (0)
+		
+#define BTFIXUPSET_SIMM13(__name, __val)						\
+	do {										\
+		___ss_##__name[0] |= 1;							\
+		___ss_##__name[1] = (unsigned)__val;					\
+	} while (0)
+	
+#define BTFIXUPCOPY_SIMM13(__name, __from)						\
+	do {										\
+		___ss_##__name[0] |= 1;							\
+		___ss_##__name[1] = ___ss_##__from[1];					\
+	} while (0)
+		
+#define BTFIXUPSET_HALF(__name, __val)							\
+	do {										\
+		___as_##__name[0] |= 1;							\
+		___as_##__name[1] = (unsigned)__val;					\
+	} while (0)
+	
+#define BTFIXUPCOPY_HALF(__name, __from)						\
+	do {										\
+		___as_##__name[0] |= 1;							\
+		___as_##__name[1] = ___as_##__from[1];					\
+	} while (0)
+		
+#define BTFIXUPSET_SETHI(__name, __val)							\
+	do {										\
+		___hs_##__name[0] |= 1;							\
+		___hs_##__name[1] = (unsigned)__val;					\
+	} while (0)
+	
+#define BTFIXUPCOPY_SETHI(__name, __from)						\
+	do {										\
+		___hs_##__name[0] |= 1;							\
+		___hs_##__name[1] = ___hs_##__from[1];					\
+	} while (0)
+		
+#define BTFIXUPSET_INT(__name, __val)							\
+	do {										\
+		___is_##__name[0] |= 1;							\
+		___is_##__name[1] = (unsigned)__val;					\
+	} while (0)
+	
+#define BTFIXUPCOPY_INT(__name, __from)							\
+	do {										\
+		___is_##__name[0] |= 1;							\
+		___is_##__name[1] = ___is_##__from[1];					\
+	} while (0)
+	
+#define BTFIXUPVAL_CALL(__name)								\
+	((unsigned long)___fs_##__name[1])
+	
+extern void btfixup(void);
+
+#else /* __ASSEMBLY__ */
+
+#define BTFIXUP_SETHI(__name)			%hi(___h_ ## __name)
+#define BTFIXUP_SETHI_INIT(__name,__val)	%hi(___h_ ## __name ## __btset_ ## __val)
+
+#endif /* __ASSEMBLY__ */
+	
+#endif /* !(_SPARC_BTFIXUP_H) */
diff --git a/arch/sparc/include/asm/bug.h b/arch/sparc/include/asm/bug.h
new file mode 100644
index 0000000..8a59e5a
--- /dev/null
+++ b/arch/sparc/include/asm/bug.h
@@ -0,0 +1,22 @@
+#ifndef _SPARC_BUG_H
+#define _SPARC_BUG_H
+
+#ifdef CONFIG_BUG
+#include <linux/compiler.h>
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+extern void do_BUG(const char *file, int line);
+#define BUG() do {					\
+	do_BUG(__FILE__, __LINE__);			\
+	__builtin_trap();				\
+} while (0)
+#else
+#define BUG()		__builtin_trap()
+#endif
+
+#define HAVE_ARCH_BUG
+#endif
+
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/arch/sparc/include/asm/bugs.h b/arch/sparc/include/asm/bugs.h
new file mode 100644
index 0000000..e179bc1
--- /dev/null
+++ b/arch/sparc/include/asm/bugs.h
@@ -0,0 +1,24 @@
+/* include/asm/bugs.h:  Sparc probes for various bugs.
+ *
+ * Copyright (C) 1996, 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#ifdef CONFIG_SPARC32
+#include <asm/cpudata.h>
+#endif
+
+#ifdef CONFIG_SPARC64
+#include <asm/sstate.h>
+#endif
+
+extern unsigned long loops_per_jiffy;
+
+static void __init check_bugs(void)
+{
+#if defined(CONFIG_SPARC32) && !defined(CONFIG_SMP)
+	cpu_data(0).udelay_val = loops_per_jiffy;
+#endif
+#ifdef CONFIG_SPARC64
+	sstate_running();
+#endif
+}
diff --git a/arch/sparc/include/asm/byteorder.h b/arch/sparc/include/asm/byteorder.h
new file mode 100644
index 0000000..bcd83aa
--- /dev/null
+++ b/arch/sparc/include/asm/byteorder.h
@@ -0,0 +1,57 @@
+#ifndef _SPARC_BYTEORDER_H
+#define _SPARC_BYTEORDER_H
+
+#include <asm/types.h>
+#include <asm/asi.h>
+
+#ifdef __GNUC__
+
+#ifdef CONFIG_SPARC32
+#define __SWAB_64_THRU_32__
+#endif
+
+#ifdef CONFIG_SPARC64
+
+static inline __u16 ___arch__swab16p(const __u16 *addr)
+{
+	__u16 ret;
+
+	__asm__ __volatile__ ("lduha [%1] %2, %0"
+			      : "=r" (ret)
+			      : "r" (addr), "i" (ASI_PL));
+	return ret;
+}
+
+static inline __u32 ___arch__swab32p(const __u32 *addr)
+{
+	__u32 ret;
+
+	__asm__ __volatile__ ("lduwa [%1] %2, %0"
+			      : "=r" (ret)
+			      : "r" (addr), "i" (ASI_PL));
+	return ret;
+}
+
+static inline __u64 ___arch__swab64p(const __u64 *addr)
+{
+	__u64 ret;
+
+	__asm__ __volatile__ ("ldxa [%1] %2, %0"
+			      : "=r" (ret)
+			      : "r" (addr), "i" (ASI_PL));
+	return ret;
+}
+
+#define __arch__swab16p(x) ___arch__swab16p(x)
+#define __arch__swab32p(x) ___arch__swab32p(x)
+#define __arch__swab64p(x) ___arch__swab64p(x)
+
+#endif /* CONFIG_SPARC64 */
+
+#define __BYTEORDER_HAS_U64__
+
+#endif
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _SPARC_BYTEORDER_H */
diff --git a/arch/sparc/include/asm/cache.h b/arch/sparc/include/asm/cache.h
new file mode 100644
index 0000000..41f85ae
--- /dev/null
+++ b/arch/sparc/include/asm/cache.h
@@ -0,0 +1,138 @@
+/* cache.h:  Cache specific code for the Sparc.  These include flushing
+ *           and direct tag/data line access.
+ *
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC_CACHE_H
+#define _SPARC_CACHE_H
+
+#define L1_CACHE_SHIFT 5
+#define L1_CACHE_BYTES 32
+#define L1_CACHE_ALIGN(x) ((((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1)))
+
+#ifdef CONFIG_SPARC32
+#define SMP_CACHE_BYTES_SHIFT 5
+#else
+#define SMP_CACHE_BYTES_SHIFT 6
+#endif
+
+#define SMP_CACHE_BYTES (1 << SMP_CACHE_BYTES_SHIFT)
+
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+
+#ifdef CONFIG_SPARC32
+#include <asm/asi.h>
+
+/* Direct access to the instruction cache is provided through and
+ * alternate address space.  The IDC bit must be off in the ICCR on
+ * HyperSparcs for these accesses to work.  The code below does not do
+ * any checking, the caller must do so.  These routines are for
+ * diagnostics only, but could end up being useful.  Use with care.
+ * Also, you are asking for trouble if you execute these in one of the
+ * three instructions following a %asr/%psr access or modification.
+ */
+
+/* First, cache-tag access. */
+static inline unsigned int get_icache_tag(int setnum, int tagnum)
+{
+	unsigned int vaddr, retval;
+
+	vaddr = ((setnum&1) << 12) | ((tagnum&0x7f) << 5);
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (retval) :
+			     "r" (vaddr), "i" (ASI_M_TXTC_TAG));
+	return retval;
+}
+
+static inline void put_icache_tag(int setnum, int tagnum, unsigned int entry)
+{
+	unsigned int vaddr;
+
+	vaddr = ((setnum&1) << 12) | ((tagnum&0x7f) << 5);
+	__asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+			     "r" (entry), "r" (vaddr), "i" (ASI_M_TXTC_TAG) :
+			     "memory");
+}
+
+/* Second cache-data access.  The data is returned two-32bit quantities
+ * at a time.
+ */
+static inline void get_icache_data(int setnum, int tagnum, int subblock,
+				       unsigned int *data)
+{
+	unsigned int value1, value2, vaddr;
+
+	vaddr = ((setnum&0x1) << 12) | ((tagnum&0x7f) << 5) |
+		((subblock&0x3) << 3);
+	__asm__ __volatile__("ldda [%2] %3, %%g2\n\t"
+			     "or %%g0, %%g2, %0\n\t"
+			     "or %%g0, %%g3, %1\n\t" :
+			     "=r" (value1), "=r" (value2) :
+			     "r" (vaddr), "i" (ASI_M_TXTC_DATA) :
+			     "g2", "g3");
+	data[0] = value1; data[1] = value2;
+}
+
+static inline void put_icache_data(int setnum, int tagnum, int subblock,
+				       unsigned int *data)
+{
+	unsigned int value1, value2, vaddr;
+
+	vaddr = ((setnum&0x1) << 12) | ((tagnum&0x7f) << 5) |
+		((subblock&0x3) << 3);
+	value1 = data[0]; value2 = data[1];
+	__asm__ __volatile__("or %%g0, %0, %%g2\n\t"
+			     "or %%g0, %1, %%g3\n\t"
+			     "stda %%g2, [%2] %3\n\t" : :
+			     "r" (value1), "r" (value2), 
+			     "r" (vaddr), "i" (ASI_M_TXTC_DATA) :
+			     "g2", "g3", "memory" /* no joke */);
+}
+
+/* Different types of flushes with the ICACHE.  Some of the flushes
+ * affect both the ICACHE and the external cache.  Others only clear
+ * the ICACHE entries on the cpu itself.  V8's (most) allow
+ * granularity of flushes on the packet (element in line), whole line,
+ * and entire cache (ie. all lines) level.  The ICACHE only flushes are
+ * ROSS HyperSparc specific and are in ross.h
+ */
+
+/* Flushes which clear out both the on-chip and external caches */
+static inline void flush_ei_page(unsigned int addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_PAGE) :
+			     "memory");
+}
+
+static inline void flush_ei_seg(unsigned int addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_SEG) :
+			     "memory");
+}
+
+static inline void flush_ei_region(unsigned int addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_REGION) :
+			     "memory");
+}
+
+static inline void flush_ei_ctx(unsigned int addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_CTX) :
+			     "memory");
+}
+
+static inline void flush_ei_user(unsigned int addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_USER) :
+			     "memory");
+}
+#endif /* CONFIG_SPARC32 */
+
+#endif /* !(_SPARC_CACHE_H) */
diff --git a/arch/sparc/include/asm/cacheflush.h b/arch/sparc/include/asm/cacheflush.h
new file mode 100644
index 0000000..0491680
--- /dev/null
+++ b/arch/sparc/include/asm/cacheflush.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_CACHEFLUSH_H
+#define ___ASM_SPARC_CACHEFLUSH_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/cacheflush_64.h>
+#else
+#include <asm/cacheflush_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/cacheflush_32.h b/arch/sparc/include/asm/cacheflush_32.h
new file mode 100644
index 0000000..68ac109
--- /dev/null
+++ b/arch/sparc/include/asm/cacheflush_32.h
@@ -0,0 +1,85 @@
+#ifndef _SPARC_CACHEFLUSH_H
+#define _SPARC_CACHEFLUSH_H
+
+#include <linux/mm.h>		/* Common for other includes */
+// #include <linux/kernel.h> from pgalloc.h
+// #include <linux/sched.h>  from pgalloc.h
+
+// #include <asm/page.h>
+#include <asm/btfixup.h>
+
+/*
+ * Fine grained cache flushing.
+ */
+#ifdef CONFIG_SMP
+
+BTFIXUPDEF_CALL(void, local_flush_cache_all, void)
+BTFIXUPDEF_CALL(void, local_flush_cache_mm, struct mm_struct *)
+BTFIXUPDEF_CALL(void, local_flush_cache_range, struct vm_area_struct *, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, local_flush_cache_page, struct vm_area_struct *, unsigned long)
+
+#define local_flush_cache_all() BTFIXUP_CALL(local_flush_cache_all)()
+#define local_flush_cache_mm(mm) BTFIXUP_CALL(local_flush_cache_mm)(mm)
+#define local_flush_cache_range(vma,start,end) BTFIXUP_CALL(local_flush_cache_range)(vma,start,end)
+#define local_flush_cache_page(vma,addr) BTFIXUP_CALL(local_flush_cache_page)(vma,addr)
+
+BTFIXUPDEF_CALL(void, local_flush_page_to_ram, unsigned long)
+BTFIXUPDEF_CALL(void, local_flush_sig_insns, struct mm_struct *, unsigned long)
+
+#define local_flush_page_to_ram(addr) BTFIXUP_CALL(local_flush_page_to_ram)(addr)
+#define local_flush_sig_insns(mm,insn_addr) BTFIXUP_CALL(local_flush_sig_insns)(mm,insn_addr)
+
+extern void smp_flush_cache_all(void);
+extern void smp_flush_cache_mm(struct mm_struct *mm);
+extern void smp_flush_cache_range(struct vm_area_struct *vma,
+				  unsigned long start,
+				  unsigned long end);
+extern void smp_flush_cache_page(struct vm_area_struct *vma, unsigned long page);
+
+extern void smp_flush_page_to_ram(unsigned long page);
+extern void smp_flush_sig_insns(struct mm_struct *mm, unsigned long insn_addr);
+
+#endif /* CONFIG_SMP */
+
+BTFIXUPDEF_CALL(void, flush_cache_all, void)
+BTFIXUPDEF_CALL(void, flush_cache_mm, struct mm_struct *)
+BTFIXUPDEF_CALL(void, flush_cache_range, struct vm_area_struct *, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, flush_cache_page, struct vm_area_struct *, unsigned long)
+
+#define flush_cache_all() BTFIXUP_CALL(flush_cache_all)()
+#define flush_cache_mm(mm) BTFIXUP_CALL(flush_cache_mm)(mm)
+#define flush_cache_dup_mm(mm) BTFIXUP_CALL(flush_cache_mm)(mm)
+#define flush_cache_range(vma,start,end) BTFIXUP_CALL(flush_cache_range)(vma,start,end)
+#define flush_cache_page(vma,addr,pfn) BTFIXUP_CALL(flush_cache_page)(vma,addr)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma, pg)		do { } while (0)
+
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));\
+		memcpy(dst, src, len);				\
+	} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));\
+		memcpy(dst, src, len);				\
+	} while (0)
+
+BTFIXUPDEF_CALL(void, __flush_page_to_ram, unsigned long)
+BTFIXUPDEF_CALL(void, flush_sig_insns, struct mm_struct *, unsigned long)
+
+#define __flush_page_to_ram(addr) BTFIXUP_CALL(__flush_page_to_ram)(addr)
+#define flush_sig_insns(mm,insn_addr) BTFIXUP_CALL(flush_sig_insns)(mm,insn_addr)
+
+extern void sparc_flush_page_to_ram(struct page *page);
+
+#define flush_dcache_page(page)			sparc_flush_page_to_ram(page)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+#define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vunmap(start, end)		flush_cache_all()
+
+#endif /* _SPARC_CACHEFLUSH_H */
diff --git a/arch/sparc/include/asm/cacheflush_64.h b/arch/sparc/include/asm/cacheflush_64.h
new file mode 100644
index 0000000..c433217
--- /dev/null
+++ b/arch/sparc/include/asm/cacheflush_64.h
@@ -0,0 +1,76 @@
+#ifndef _SPARC64_CACHEFLUSH_H
+#define _SPARC64_CACHEFLUSH_H
+
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/mm.h>
+
+/* Cache flush operations. */
+
+/* These are the same regardless of whether this is an SMP kernel or not. */
+#define flush_cache_mm(__mm) \
+	do { if ((__mm) == current->mm) flushw_user(); } while(0)
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+#define flush_cache_range(vma, start, end) \
+	flush_cache_mm((vma)->vm_mm)
+#define flush_cache_page(vma, page, pfn) \
+	flush_cache_mm((vma)->vm_mm)
+
+/*
+ * On spitfire, the icache doesn't snoop local stores and we don't
+ * use block commit stores (which invalidate icache lines) during
+ * module load, so we need this.
+ */
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void __flush_icache_page(unsigned long);
+
+extern void __flush_dcache_page(void *addr, int flush_icache);
+extern void flush_dcache_page_impl(struct page *page);
+#ifdef CONFIG_SMP
+extern void smp_flush_dcache_page_impl(struct page *page, int cpu);
+extern void flush_dcache_page_all(struct mm_struct *mm, struct page *page);
+#else
+#define smp_flush_dcache_page_impl(page,cpu) flush_dcache_page_impl(page)
+#define flush_dcache_page_all(mm,page) flush_dcache_page_impl(page)
+#endif
+
+extern void __flush_dcache_range(unsigned long start, unsigned long end);
+extern void flush_dcache_page(struct page *page);
+
+#define flush_icache_page(vma, pg)	do { } while(0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+
+extern void flush_ptrace_access(struct vm_area_struct *, struct page *,
+				unsigned long uaddr, void *kaddr,
+				unsigned long len, int write);
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)		\
+	do {								\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));	\
+		memcpy(dst, src, len);					\
+		flush_ptrace_access(vma, page, vaddr, src, len, 0);	\
+	} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) 		\
+	do {								\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));	\
+		memcpy(dst, src, len);					\
+		flush_ptrace_access(vma, page, vaddr, dst, len, 1);	\
+	} while (0)
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+/* internal debugging function */
+void kernel_map_pages(struct page *page, int numpages, int enable);
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _SPARC64_CACHEFLUSH_H */
diff --git a/arch/sparc/include/asm/chafsr.h b/arch/sparc/include/asm/chafsr.h
new file mode 100644
index 0000000..85c69b3
--- /dev/null
+++ b/arch/sparc/include/asm/chafsr.h
@@ -0,0 +1,241 @@
+#ifndef _SPARC64_CHAFSR_H
+#define _SPARC64_CHAFSR_H
+
+/* Cheetah Asynchronous Fault Status register, ASI=0x4C VA<63:0>=0x0 */
+
+/* Comments indicate which processor variants on which the bit definition
+ * is valid.  Codes are:
+ * ch	-->	cheetah
+ * ch+	-->	cheetah plus
+ * jp	-->	jalapeno
+ */
+
+/* All bits of this register except M_SYNDROME and E_SYNDROME are
+ * read, write 1 to clear.  M_SYNDROME and E_SYNDROME are read-only.
+ */
+
+/* Software bit set by linux trap handlers to indicate that the trap was
+ * signalled at %tl >= 1.
+ */
+#define CHAFSR_TL1		(1UL << 63UL) /* n/a */
+
+/* Unmapped error from system bus for prefetch queue or
+ * store queue read operation
+ */
+#define CHPAFSR_DTO		(1UL << 59UL) /* ch+ */
+
+/* Bus error from system bus for prefetch queue or store queue
+ * read operation
+ */
+#define CHPAFSR_DBERR		(1UL << 58UL) /* ch+ */
+
+/* Hardware corrected E-cache Tag ECC error */
+#define CHPAFSR_THCE		(1UL << 57UL) /* ch+ */
+/* System interface protocol error, hw timeout caused */
+#define JPAFSR_JETO		(1UL << 57UL) /* jp */
+
+/* SW handled correctable E-cache Tag ECC error */
+#define CHPAFSR_TSCE		(1UL << 56UL) /* ch+ */
+/* Parity error on system snoop results */
+#define JPAFSR_SCE		(1UL << 56UL) /* jp */
+
+/* Uncorrectable E-cache Tag ECC error */
+#define CHPAFSR_TUE		(1UL << 55UL) /* ch+ */
+/* System interface protocol error, illegal command detected */
+#define JPAFSR_JEIC		(1UL << 55UL) /* jp */
+
+/* Uncorrectable system bus data ECC error due to prefetch
+ * or store fill request
+ */
+#define CHPAFSR_DUE		(1UL << 54UL) /* ch+ */
+/* System interface protocol error, illegal ADTYPE detected */
+#define JPAFSR_JEIT		(1UL << 54UL) /* jp */
+
+/* Multiple errors of the same type have occurred.  This bit is set when
+ * an uncorrectable error or a SW correctable error occurs and the status
+ * bit to report that error is already set.  When multiple errors of
+ * different types are indicated by setting multiple status bits.
+ *
+ * This bit is not set if multiple HW corrected errors with the same
+ * status bit occur, only uncorrectable and SW correctable ones have
+ * this behavior.
+ *
+ * This bit is not set when multiple ECC errors happen within a single
+ * 64-byte system bus transaction.  Only the first ECC error in a 16-byte
+ * subunit will be logged.  All errors in subsequent 16-byte subunits
+ * from the same 64-byte transaction are ignored.
+ */
+#define CHAFSR_ME		(1UL << 53UL) /* ch,ch+,jp */
+
+/* Privileged state error has occurred.  This is a capture of PSTATE.PRIV
+ * at the time the error is detected.
+ */
+#define CHAFSR_PRIV		(1UL << 52UL) /* ch,ch+,jp */
+
+/* The following bits 51 (CHAFSR_PERR) to 33 (CHAFSR_CE) are sticky error
+ * bits and record the most recently detected errors.  Bits accumulate
+ * errors that have been detected since the last write to clear the bit.
+ */
+
+/* System interface protocol error.  The processor asserts its' ERROR
+ * pin when this event occurs and it also logs a specific cause code
+ * into a JTAG scannable flop.
+ */
+#define CHAFSR_PERR		(1UL << 51UL) /* ch,ch+,jp */
+
+/* Internal processor error.  The processor asserts its' ERROR
+ * pin when this event occurs and it also logs a specific cause code
+ * into a JTAG scannable flop.
+ */
+#define CHAFSR_IERR		(1UL << 50UL) /* ch,ch+,jp */
+
+/* System request parity error on incoming address */
+#define CHAFSR_ISAP		(1UL << 49UL) /* ch,ch+,jp */
+
+/* HW Corrected system bus MTAG ECC error */
+#define CHAFSR_EMC		(1UL << 48UL) /* ch,ch+ */
+/* Parity error on L2 cache tag SRAM */
+#define JPAFSR_ETP		(1UL << 48UL) /* jp */
+
+/* Uncorrectable system bus MTAG ECC error */
+#define CHAFSR_EMU		(1UL << 47UL) /* ch,ch+ */
+/* Out of range memory error has occurred */
+#define JPAFSR_OM		(1UL << 47UL) /* jp */
+
+/* HW Corrected system bus data ECC error for read of interrupt vector */
+#define CHAFSR_IVC		(1UL << 46UL) /* ch,ch+ */
+/* Error due to unsupported store */
+#define JPAFSR_UMS		(1UL << 46UL) /* jp */
+
+/* Uncorrectable system bus data ECC error for read of interrupt vector */
+#define CHAFSR_IVU		(1UL << 45UL) /* ch,ch+,jp */
+
+/* Unmapped error from system bus */
+#define CHAFSR_TO		(1UL << 44UL) /* ch,ch+,jp */
+
+/* Bus error response from system bus */
+#define CHAFSR_BERR		(1UL << 43UL) /* ch,ch+,jp */
+
+/* SW Correctable E-cache ECC error for instruction fetch or data access
+ * other than block load.
+ */
+#define CHAFSR_UCC		(1UL << 42UL) /* ch,ch+,jp */
+
+/* Uncorrectable E-cache ECC error for instruction fetch or data access
+ * other than block load.
+ */
+#define CHAFSR_UCU		(1UL << 41UL) /* ch,ch+,jp */
+
+/* Copyout HW Corrected ECC error */
+#define CHAFSR_CPC		(1UL << 40UL) /* ch,ch+,jp */
+
+/* Copyout Uncorrectable ECC error */
+#define CHAFSR_CPU		(1UL << 39UL) /* ch,ch+,jp */
+
+/* HW Corrected ECC error from E-cache for writeback */
+#define CHAFSR_WDC		(1UL << 38UL) /* ch,ch+,jp */
+
+/* Uncorrectable ECC error from E-cache for writeback */
+#define CHAFSR_WDU		(1UL << 37UL) /* ch,ch+,jp */
+
+/* HW Corrected ECC error from E-cache for store merge or block load */
+#define CHAFSR_EDC		(1UL << 36UL) /* ch,ch+,jp */
+
+/* Uncorrectable ECC error from E-cache for store merge or block load */
+#define CHAFSR_EDU		(1UL << 35UL) /* ch,ch+,jp */
+
+/* Uncorrectable system bus data ECC error for read of memory or I/O */
+#define CHAFSR_UE		(1UL << 34UL) /* ch,ch+,jp */
+
+/* HW Corrected system bus data ECC error for read of memory or I/O */
+#define CHAFSR_CE		(1UL << 33UL) /* ch,ch+,jp */
+
+/* Uncorrectable ECC error from remote cache/memory */
+#define JPAFSR_RUE		(1UL << 32UL) /* jp */
+
+/* Correctable ECC error from remote cache/memory */
+#define JPAFSR_RCE		(1UL << 31UL) /* jp */
+
+/* JBUS parity error on returned read data */
+#define JPAFSR_BP		(1UL << 30UL) /* jp */
+
+/* JBUS parity error on data for writeback or block store */
+#define JPAFSR_WBP		(1UL << 29UL) /* jp */
+
+/* Foreign read to DRAM incurring correctable ECC error */
+#define JPAFSR_FRC		(1UL << 28UL) /* jp */
+
+/* Foreign read to DRAM incurring uncorrectable ECC error */
+#define JPAFSR_FRU		(1UL << 27UL) /* jp */
+
+#define CHAFSR_ERRORS		(CHAFSR_PERR | CHAFSR_IERR | CHAFSR_ISAP | CHAFSR_EMC | \
+				 CHAFSR_EMU | CHAFSR_IVC | CHAFSR_IVU | CHAFSR_TO | \
+				 CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | CHAFSR_CPC | \
+				 CHAFSR_CPU | CHAFSR_WDC | CHAFSR_WDU | CHAFSR_EDC | \
+				 CHAFSR_EDU | CHAFSR_UE | CHAFSR_CE)
+#define CHPAFSR_ERRORS		(CHPAFSR_DTO | CHPAFSR_DBERR | CHPAFSR_THCE | \
+				 CHPAFSR_TSCE | CHPAFSR_TUE | CHPAFSR_DUE | \
+				 CHAFSR_PERR | CHAFSR_IERR | CHAFSR_ISAP | CHAFSR_EMC | \
+				 CHAFSR_EMU | CHAFSR_IVC | CHAFSR_IVU | CHAFSR_TO | \
+				 CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | CHAFSR_CPC | \
+				 CHAFSR_CPU | CHAFSR_WDC | CHAFSR_WDU | CHAFSR_EDC | \
+				 CHAFSR_EDU | CHAFSR_UE | CHAFSR_CE)
+#define JPAFSR_ERRORS		(JPAFSR_JETO | JPAFSR_SCE | JPAFSR_JEIC | \
+				 JPAFSR_JEIT | CHAFSR_PERR | CHAFSR_IERR | \
+				 CHAFSR_ISAP | JPAFSR_ETP | JPAFSR_OM | \
+				 JPAFSR_UMS | CHAFSR_IVU | CHAFSR_TO | \
+				 CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | \
+				 CHAFSR_CPC | CHAFSR_CPU | CHAFSR_WDC | \
+				 CHAFSR_WDU | CHAFSR_EDC | CHAFSR_EDU | \
+				 CHAFSR_UE | CHAFSR_CE | JPAFSR_RUE | \
+				 JPAFSR_RCE | JPAFSR_BP | JPAFSR_WBP | \
+				 JPAFSR_FRC | JPAFSR_FRU)
+
+/* Active JBUS request signal when error occurred */
+#define JPAFSR_JBREQ		(0x7UL << 24UL) /* jp */
+#define JPAFSR_JBREQ_SHIFT	24UL
+
+/* L2 cache way information */
+#define JPAFSR_ETW		(0x3UL << 22UL) /* jp */
+#define JPAFSR_ETW_SHIFT	22UL
+
+/* System bus MTAG ECC syndrome.  This field captures the status of the
+ * first occurrence of the highest-priority error according to the M_SYND
+ * overwrite policy.  After the AFSR sticky bit, corresponding to the error
+ * for which the M_SYND is reported, is cleared, the contents of the M_SYND
+ * field will be unchanged by will be unfrozen for further error capture.
+ */
+#define CHAFSR_M_SYNDROME	(0xfUL << 16UL) /* ch,ch+,jp */
+#define CHAFSR_M_SYNDROME_SHIFT	16UL
+
+/* Agenid Id of the foreign device causing the UE/CE errors */
+#define JPAFSR_AID		(0x1fUL << 9UL) /* jp */
+#define JPAFSR_AID_SHIFT	9UL
+
+/* System bus or E-cache data ECC syndrome.  This field captures the status
+ * of the first occurrence of the highest-priority error according to the
+ * E_SYND overwrite policy.  After the AFSR sticky bit, corresponding to the
+ * error for which the E_SYND is reported, is cleare, the contents of the E_SYND
+ * field will be unchanged but will be unfrozen for further error capture.
+ */
+#define CHAFSR_E_SYNDROME	(0x1ffUL << 0UL) /* ch,ch+,jp */
+#define CHAFSR_E_SYNDROME_SHIFT	0UL
+
+/* The AFSR must be explicitly cleared by software, it is not cleared automatically
+ * by a read.  Writes to bits <51:33> with bits set will clear the corresponding
+ * bits in the AFSR.  Bits associated with disrupting traps must be cleared before
+ * interrupts are re-enabled to prevent multiple traps for the same error.  I.e.
+ * PSTATE.IE and AFSR bits control delivery of disrupting traps.
+ *
+ * Since there is only one AFAR, when multiple events have been logged by the
+ * bits in the AFSR, at most one of these events will have its status captured
+ * in the AFAR.  The highest priority of those event bits will get AFAR logging.
+ * The AFAR will be unlocked and available to capture the address of another event
+ * as soon as the one bit in AFSR that corresponds to the event logged in AFAR is
+ * cleared.  For example, if AFSR.CE is detected, then AFSR.UE (which overwrites
+ * the AFAR), and AFSR.UE is cleared by not AFSR.CE, then the AFAR will be unlocked
+ * and ready for another event, even though AFSR.CE is still set.  The same rules
+ * also apply to the M_SYNDROME and E_SYNDROME fields of the AFSR.
+ */
+
+#endif /* _SPARC64_CHAFSR_H */
diff --git a/arch/sparc/include/asm/checksum.h b/arch/sparc/include/asm/checksum.h
new file mode 100644
index 0000000..7ac0d74
--- /dev/null
+++ b/arch/sparc/include/asm/checksum.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_CHECKSUM_H
+#define ___ASM_SPARC_CHECKSUM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/checksum_64.h>
+#else
+#include <asm/checksum_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/checksum_32.h b/arch/sparc/include/asm/checksum_32.h
new file mode 100644
index 0000000..bdbda14
--- /dev/null
+++ b/arch/sparc/include/asm/checksum_32.h
@@ -0,0 +1,241 @@
+#ifndef __SPARC_CHECKSUM_H
+#define __SPARC_CHECKSUM_H
+
+/*  checksum.h:  IP/UDP/TCP checksum routines on the Sparc.
+ *
+ *  Copyright(C) 1995 Linus Torvalds
+ *  Copyright(C) 1995 Miguel de Icaza
+ *  Copyright(C) 1996 David S. Miller
+ *  Copyright(C) 1996 Eddie C. Dost
+ *  Copyright(C) 1997 Jakub Jelinek
+ *
+ * derived from:
+ *	Alpha checksum c-code
+ *      ix86 inline assembly
+ *      RFC1071 Computing the Internet Checksum
+ */
+
+#include <linux/in6.h>
+#include <asm/uaccess.h>
+
+/* computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/* the same as csum_partial, but copies from fs:src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern unsigned int __csum_partial_copy_sparc_generic (const unsigned char *, unsigned char *);
+
+static inline __wsum
+csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
+{
+	register unsigned int ret asm("o0") = (unsigned int)src;
+	register char *d asm("o1") = dst;
+	register int l asm("g1") = len;
+
+	__asm__ __volatile__ (
+		"call __csum_partial_copy_sparc_generic\n\t"
+		" mov %6, %%g7\n"
+	: "=&r" (ret), "=&r" (d), "=&r" (l)
+	: "0" (ret), "1" (d), "2" (l), "r" (sum)
+	: "o2", "o3", "o4", "o5", "o7",
+	  "g2", "g3", "g4", "g5", "g7",
+	  "memory", "cc");
+	return (__force __wsum)ret;
+}
+
+static inline __wsum
+csum_partial_copy_from_user(const void __user *src, void *dst, int len,
+			    __wsum sum, int *err)
+  {
+	register unsigned long ret asm("o0") = (unsigned long)src;
+	register char *d asm("o1") = dst;
+	register int l asm("g1") = len;
+	register __wsum s asm("g7") = sum;
+
+	__asm__ __volatile__ (
+	".section __ex_table,#alloc\n\t"
+	".align 4\n\t"
+	".word 1f,2\n\t"
+	".previous\n"
+	"1:\n\t"
+	"call __csum_partial_copy_sparc_generic\n\t"
+	" st %8, [%%sp + 64]\n"
+	: "=&r" (ret), "=&r" (d), "=&r" (l), "=&r" (s)
+	: "0" (ret), "1" (d), "2" (l), "3" (s), "r" (err)
+	: "o2", "o3", "o4", "o5", "o7", "g2", "g3", "g4", "g5",
+	  "cc", "memory");
+	return (__force __wsum)ret;
+}
+
+static inline __wsum
+csum_partial_copy_to_user(const void *src, void __user *dst, int len,
+			  __wsum sum, int *err)
+{
+	if (!access_ok (VERIFY_WRITE, dst, len)) {
+		*err = -EFAULT;
+		return sum;
+	} else {
+		register unsigned long ret asm("o0") = (unsigned long)src;
+		register char __user *d asm("o1") = dst;
+		register int l asm("g1") = len;
+		register __wsum s asm("g7") = sum;
+
+		__asm__ __volatile__ (
+		".section __ex_table,#alloc\n\t"
+		".align 4\n\t"
+		".word 1f,1\n\t"
+		".previous\n"
+		"1:\n\t"
+		"call __csum_partial_copy_sparc_generic\n\t"
+		" st %8, [%%sp + 64]\n"
+		: "=&r" (ret), "=&r" (d), "=&r" (l), "=&r" (s)
+		: "0" (ret), "1" (d), "2" (l), "3" (s), "r" (err)
+		: "o2", "o3", "o4", "o5", "o7",
+		  "g2", "g3", "g4", "g5",
+		  "cc", "memory");
+		return (__force __wsum)ret;
+	}
+}
+
+#define HAVE_CSUM_COPY_USER
+#define csum_and_copy_to_user csum_partial_copy_to_user
+
+/* ihl is always 5 or greater, almost always is 5, and iph is word aligned
+ * the majority of the time.
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	__sum16 sum;
+
+	/* Note: We must read %2 before we touch %0 for the first time,
+	 *       because GCC can legitimately use the same register for
+	 *       both operands.
+	 */
+	__asm__ __volatile__("sub\t%2, 4, %%g4\n\t"
+			     "ld\t[%1 + 0x00], %0\n\t"
+			     "ld\t[%1 + 0x04], %%g2\n\t"
+			     "ld\t[%1 + 0x08], %%g3\n\t"
+			     "addcc\t%%g2, %0, %0\n\t"
+			     "addxcc\t%%g3, %0, %0\n\t"
+			     "ld\t[%1 + 0x0c], %%g2\n\t"
+			     "ld\t[%1 + 0x10], %%g3\n\t"
+			     "addxcc\t%%g2, %0, %0\n\t"
+			     "addx\t%0, %%g0, %0\n"
+			     "1:\taddcc\t%%g3, %0, %0\n\t"
+			     "add\t%1, 4, %1\n\t"
+			     "addxcc\t%0, %%g0, %0\n\t"
+			     "subcc\t%%g4, 1, %%g4\n\t"
+			     "be,a\t2f\n\t"
+			     "sll\t%0, 16, %%g2\n\t"
+			     "b\t1b\n\t"
+			     "ld\t[%1 + 0x10], %%g3\n"
+			     "2:\taddcc\t%0, %%g2, %%g2\n\t"
+			     "srl\t%%g2, 16, %0\n\t"
+			     "addx\t%0, %%g0, %0\n\t"
+			     "xnor\t%%g0, %0, %0"
+			     : "=r" (sum), "=&r" (iph)
+			     : "r" (ihl), "1" (iph)
+			     : "g2", "g3", "g4", "cc", "memory");
+	return sum;
+}
+
+/* Fold a partial checksum without adding pseudo headers. */
+static inline __sum16 csum_fold(__wsum sum)
+{
+	unsigned int tmp;
+
+	__asm__ __volatile__("addcc\t%0, %1, %1\n\t"
+			     "srl\t%1, 16, %1\n\t"
+			     "addx\t%1, %%g0, %1\n\t"
+			     "xnor\t%%g0, %1, %0"
+			     : "=&r" (sum), "=r" (tmp)
+			     : "0" (sum), "1" ((__force u32)sum<<16)
+			     : "cc");
+	return (__force __sum16)sum;
+}
+
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+					       unsigned short len,
+					       unsigned short proto,
+					       __wsum sum)
+{
+	__asm__ __volatile__("addcc\t%1, %0, %0\n\t"
+			     "addxcc\t%2, %0, %0\n\t"
+			     "addxcc\t%3, %0, %0\n\t"
+			     "addx\t%0, %%g0, %0\n\t"
+			     : "=r" (sum), "=r" (saddr)
+			     : "r" (daddr), "r" (proto + len), "0" (sum),
+			       "1" (saddr)
+			     : "cc");
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+
+static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+				      const struct in6_addr *daddr,
+				      __u32 len, unsigned short proto,
+				      __wsum sum)
+{
+	__asm__ __volatile__ (
+		"addcc	%3, %4, %%g4\n\t"
+		"addxcc	%5, %%g4, %%g4\n\t"
+		"ld	[%2 + 0x0c], %%g2\n\t"
+		"ld	[%2 + 0x08], %%g3\n\t"
+		"addxcc	%%g2, %%g4, %%g4\n\t"
+		"ld	[%2 + 0x04], %%g2\n\t"
+		"addxcc	%%g3, %%g4, %%g4\n\t"
+		"ld	[%2 + 0x00], %%g3\n\t"
+		"addxcc	%%g2, %%g4, %%g4\n\t"
+		"ld	[%1 + 0x0c], %%g2\n\t"
+		"addxcc	%%g3, %%g4, %%g4\n\t"
+		"ld	[%1 + 0x08], %%g3\n\t"
+		"addxcc	%%g2, %%g4, %%g4\n\t"
+		"ld	[%1 + 0x04], %%g2\n\t"
+		"addxcc	%%g3, %%g4, %%g4\n\t"
+		"ld	[%1 + 0x00], %%g3\n\t"
+		"addxcc	%%g2, %%g4, %%g4\n\t"
+		"addxcc	%%g3, %%g4, %0\n\t"
+		"addx	0, %0, %0\n"
+		: "=&r" (sum)
+		: "r" (saddr), "r" (daddr),
+		  "r"(htonl(len)), "r"(htonl(proto)), "r"(sum)
+		: "g2", "g3", "g4", "cc");
+
+	return csum_fold(sum);
+}
+
+/* this routine is used for miscellaneous IP-like checksums, mainly in icmp.c */
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#endif /* !(__SPARC_CHECKSUM_H) */
diff --git a/arch/sparc/include/asm/checksum_64.h b/arch/sparc/include/asm/checksum_64.h
new file mode 100644
index 0000000..019b961
--- /dev/null
+++ b/arch/sparc/include/asm/checksum_64.h
@@ -0,0 +1,167 @@
+#ifndef __SPARC64_CHECKSUM_H
+#define __SPARC64_CHECKSUM_H
+
+/*  checksum.h:  IP/UDP/TCP checksum routines on the V9.
+ *
+ *  Copyright(C) 1995 Linus Torvalds
+ *  Copyright(C) 1995 Miguel de Icaza
+ *  Copyright(C) 1996 David S. Miller
+ *  Copyright(C) 1996 Eddie C. Dost
+ *  Copyright(C) 1997 Jakub Jelinek
+ *
+ * derived from:
+ *	Alpha checksum c-code
+ *      ix86 inline assembly
+ *      RFC1071 Computing the Internet Checksum
+ */
+
+#include <linux/in6.h>
+#include <asm/uaccess.h>
+
+/* computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern __wsum csum_partial(const void * buff, int len, __wsum sum);
+
+/* the same as csum_partial, but copies from user space while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern __wsum csum_partial_copy_nocheck(const void *src, void *dst,
+					      int len, __wsum sum);
+
+extern long __csum_partial_copy_from_user(const void __user *src,
+					  void *dst, int len,
+					  __wsum sum);
+
+static inline __wsum
+csum_partial_copy_from_user(const void __user *src,
+			    void *dst, int len,
+			    __wsum sum, int *err)
+{
+	long ret = __csum_partial_copy_from_user(src, dst, len, sum);
+	if (ret < 0)
+		*err = -EFAULT;
+	return (__force __wsum) ret;
+}
+
+/*
+ *	Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+extern long __csum_partial_copy_to_user(const void *src,
+					void __user *dst, int len,
+					  __wsum sum);
+
+static inline __wsum
+csum_and_copy_to_user(const void *src,
+		      void __user *dst, int len,
+		      __wsum sum, int *err)
+{
+	long ret = __csum_partial_copy_to_user(src, dst, len, sum);
+	if (ret < 0)
+		*err = -EFAULT;
+	return (__force __wsum) ret;
+}
+
+/* ihl is always 5 or greater, almost always is 5, and iph is word aligned
+ * the majority of the time.
+ */
+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+/* Fold a partial checksum without adding pseudo headers. */
+static inline __sum16 csum_fold(__wsum sum)
+{
+	unsigned int tmp;
+
+	__asm__ __volatile__(
+"	addcc		%0, %1, %1\n"
+"	srl		%1, 16, %1\n"
+"	addc		%1, %%g0, %1\n"
+"	xnor		%%g0, %1, %0\n"
+	: "=&r" (sum), "=r" (tmp)
+	: "0" (sum), "1" ((__force u32)sum<<16)
+	: "cc");
+	return (__force __sum16)sum;
+}
+
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+					       unsigned int len,
+					       unsigned short proto,
+					       __wsum sum)
+{
+	__asm__ __volatile__(
+"	addcc		%1, %0, %0\n"
+"	addccc		%2, %0, %0\n"
+"	addccc		%3, %0, %0\n"
+"	addc		%0, %%g0, %0\n"
+	: "=r" (sum), "=r" (saddr)
+	: "r" (daddr), "r" (proto + len), "0" (sum), "1" (saddr)
+	: "cc");
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+
+static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+				      const struct in6_addr *daddr,
+				      __u32 len, unsigned short proto,
+				      __wsum sum)
+{
+	__asm__ __volatile__ (
+"	addcc		%3, %4, %%g7\n"
+"	addccc		%5, %%g7, %%g7\n"
+"	lduw		[%2 + 0x0c], %%g2\n"
+"	lduw		[%2 + 0x08], %%g3\n"
+"	addccc		%%g2, %%g7, %%g7\n"
+"	lduw		[%2 + 0x04], %%g2\n"
+"	addccc		%%g3, %%g7, %%g7\n"
+"	lduw		[%2 + 0x00], %%g3\n"
+"	addccc		%%g2, %%g7, %%g7\n"
+"	lduw		[%1 + 0x0c], %%g2\n"
+"	addccc		%%g3, %%g7, %%g7\n"
+"	lduw		[%1 + 0x08], %%g3\n"
+"	addccc		%%g2, %%g7, %%g7\n"
+"	lduw		[%1 + 0x04], %%g2\n"
+"	addccc		%%g3, %%g7, %%g7\n"
+"	lduw		[%1 + 0x00], %%g3\n"
+"	addccc		%%g2, %%g7, %%g7\n"
+"	addccc		%%g3, %%g7, %0\n"
+"	addc		0, %0, %0\n"
+	: "=&r" (sum)
+	: "r" (saddr), "r" (daddr), "r"(htonl(len)),
+	  "r"(htonl(proto)), "r"(sum)
+	: "g2", "g3", "g7", "cc");
+
+	return csum_fold(sum);
+}
+
+/* this routine is used for miscellaneous IP-like checksums, mainly in icmp.c */
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#endif /* !(__SPARC64_CHECKSUM_H) */
diff --git a/arch/sparc/include/asm/chmctrl.h b/arch/sparc/include/asm/chmctrl.h
new file mode 100644
index 0000000..859b4a4
--- /dev/null
+++ b/arch/sparc/include/asm/chmctrl.h
@@ -0,0 +1,183 @@
+#ifndef _SPARC64_CHMCTRL_H
+#define _SPARC64_CHMCTRL_H
+
+/* Cheetah memory controller programmable registers. */
+#define CHMCTRL_TCTRL1		0x00 /* Memory Timing Control I		*/
+#define CHMCTRL_TCTRL2		0x08 /* Memory Timing Control II	*/
+#define CHMCTRL_TCTRL3		0x38 /* Memory Timing Control III	*/
+#define CHMCTRL_TCTRL4		0x40 /* Memory Timing Control IV	*/
+#define CHMCTRL_DECODE1		0x10 /* Memory Address Decode I		*/
+#define CHMCTRL_DECODE2		0x18 /* Memory Address Decode II	*/
+#define CHMCTRL_DECODE3		0x20 /* Memory Address Decode III	*/
+#define CHMCTRL_DECODE4		0x28 /* Memory Address Decode IV	*/
+#define CHMCTRL_MACTRL		0x30 /* Memory Address Control		*/
+
+/* Memory Timing Control I */
+#define TCTRL1_SDRAMCTL_DLY	0xf000000000000000UL
+#define TCTRL1_SDRAMCTL_DLY_SHIFT     60
+#define TCTRL1_SDRAMCLK_DLY	0x0e00000000000000UL
+#define TCTRL1_SDRAMCLK_DLY_SHIFT     57
+#define TCTRL1_R		0x0100000000000000UL
+#define TCTRL1_R_SHIFT 		      56
+#define TCTRL1_AUTORFR_CYCLE	0x00fe000000000000UL
+#define TCTRL1_AUTORFR_CYCLE_SHIFT    49
+#define TCTRL1_RD_WAIT		0x0001f00000000000UL
+#define TCTRL1_RD_WAIT_SHIFT	      44
+#define TCTRL1_PC_CYCLE		0x00000fc000000000UL
+#define TCTRL1_PC_CYCLE_SHIFT	      38
+#define TCTRL1_WR_MORE_RAS_PW	0x0000003f00000000UL
+#define TCTRL1_WR_MORE_RAS_PW_SHIFT   32
+#define TCTRL1_RD_MORE_RAW_PW	0x00000000fc000000UL
+#define TCTRL1_RD_MORE_RAS_PW_SHIFT   26
+#define TCTRL1_ACT_WR_DLY	0x0000000003f00000UL
+#define TCTRL1_ACT_WR_DLY_SHIFT	      20
+#define TCTRL1_ACT_RD_DLY	0x00000000000fc000UL
+#define TCTRL1_ACT_RD_DLY_SHIFT	      14
+#define TCTRL1_BANK_PRESENT	0x0000000000003000UL
+#define TCTRL1_BANK_PRESENT_SHIFT     12
+#define TCTRL1_RFR_INT		0x0000000000000ff8UL
+#define TCTRL1_RFR_INT_SHIFT	      3
+#define TCTRL1_SET_MODE_REG	0x0000000000000004UL
+#define TCTRL1_SET_MODE_REG_SHIFT     2
+#define TCTRL1_RFR_ENABLE	0x0000000000000002UL
+#define TCTRL1_RFR_ENABLE_SHIFT	      1
+#define TCTRL1_PRECHG_ALL	0x0000000000000001UL
+#define TCTRL1_PRECHG_ALL_SHIFT	      0
+
+/* Memory Timing Control II */
+#define TCTRL2_WR_MSEL_DLY	0xfc00000000000000UL
+#define TCTRL2_WR_MSEL_DLY_SHIFT      58
+#define TCTRL2_RD_MSEL_DLY	0x03f0000000000000UL
+#define TCTRL2_RD_MSEL_DLY_SHIFT      52
+#define TCTRL2_WRDATA_THLD	0x000c000000000000UL
+#define TCTRL2_WRDATA_THLD_SHIFT      50
+#define TCTRL2_RDWR_RD_TI_DLY	0x0003f00000000000UL
+#define TCTRL2_RDWR_RD_TI_DLY_SHIFT   44
+#define TCTRL2_AUTOPRECHG_ENBL	0x0000080000000000UL
+#define TCTRL2_AUTOPRECHG_ENBL_SHIFT  43
+#define TCTRL2_RDWR_PI_MORE_DLY	0x000007c000000000UL
+#define TCTRL2_RDWR_PI_MORE_DLY_SHIFT 38
+#define TCTRL2_RDWR_1_DLY	0x0000003f00000000UL
+#define TCTRL2_RDWR_1_DLY_SHIFT       32
+#define TCTRL2_WRWR_PI_MORE_DLY	0x00000000f8000000UL
+#define TCTRL2_WRWR_PI_MORE_DLY_SHIFT 27
+#define TCTRL2_WRWR_1_DLY	0x0000000007e00000UL
+#define TCTRL2_WRWR_1_DLY_SHIFT       21
+#define TCTRL2_RDWR_RD_PI_MORE_DLY 0x00000000001f0000UL
+#define TCTRL2_RDWR_RD_PI_MORE_DLY_SHIFT 16
+#define TCTRL2_R		0x0000000000008000UL
+#define TCTRL2_R_SHIFT		      15
+#define TCTRL2_SDRAM_MODE_REG_DATA 0x0000000000007fffUL
+#define TCTRL2_SDRAM_MODE_REG_DATA_SHIFT 0
+
+/* Memory Timing Control III */
+#define TCTRL3_SDRAM_CTL_DLY	0xf000000000000000UL
+#define TCTRL3_SDRAM_CTL_DLY_SHIFT    60
+#define TCTRL3_SDRAM_CLK_DLY	0x0e00000000000000UL
+#define TCTRL3_SDRAM_CLK_DLY_SHIFT    57
+#define TCTRL3_R		0x0100000000000000UL
+#define TCTRL3_R_SHIFT		      56
+#define TCTRL3_AUTO_RFR_CYCLE	0x00fe000000000000UL
+#define TCTRL3_AUTO_RFR_CYCLE_SHIFT   49
+#define TCTRL3_RD_WAIT		0x0001f00000000000UL
+#define TCTRL3_RD_WAIT_SHIFT	      44
+#define TCTRL3_PC_CYCLE		0x00000fc000000000UL
+#define TCTRL3_PC_CYCLE_SHIFT	      38
+#define TCTRL3_WR_MORE_RAW_PW	0x0000003f00000000UL
+#define TCTRL3_WR_MORE_RAW_PW_SHIFT   32
+#define TCTRL3_RD_MORE_RAW_PW	0x00000000fc000000UL
+#define TCTRL3_RD_MORE_RAW_PW_SHIFT   26
+#define TCTRL3_ACT_WR_DLY	0x0000000003f00000UL
+#define TCTRL3_ACT_WR_DLY_SHIFT       20
+#define TCTRL3_ACT_RD_DLY	0x00000000000fc000UL
+#define TCTRL3_ACT_RD_DLY_SHIFT       14
+#define TCTRL3_BANK_PRESENT	0x0000000000003000UL
+#define TCTRL3_BANK_PRESENT_SHIFT     12
+#define TCTRL3_RFR_INT		0x0000000000000ff8UL
+#define TCTRL3_RFR_INT_SHIFT	      3
+#define TCTRL3_SET_MODE_REG	0x0000000000000004UL
+#define TCTRL3_SET_MODE_REG_SHIFT     2
+#define TCTRL3_RFR_ENABLE	0x0000000000000002UL
+#define TCTRL3_RFR_ENABLE_SHIFT       1
+#define TCTRL3_PRECHG_ALL	0x0000000000000001UL
+#define TCTRL3_PRECHG_ALL_SHIFT	      0
+
+/* Memory Timing Control IV */
+#define TCTRL4_WR_MSEL_DLY	0xfc00000000000000UL
+#define TCTRL4_WR_MSEL_DLY_SHIFT      58
+#define TCTRL4_RD_MSEL_DLY	0x03f0000000000000UL
+#define TCTRL4_RD_MSEL_DLY_SHIFT      52
+#define TCTRL4_WRDATA_THLD	0x000c000000000000UL
+#define TCTRL4_WRDATA_THLD_SHIFT      50
+#define TCTRL4_RDWR_RD_RI_DLY	0x0003f00000000000UL
+#define TCTRL4_RDWR_RD_RI_DLY_SHIFT   44
+#define TCTRL4_AUTO_PRECHG_ENBL	0x0000080000000000UL
+#define TCTRL4_AUTO_PRECHG_ENBL_SHIFT 43
+#define TCTRL4_RD_WR_PI_MORE_DLY 0x000007c000000000UL
+#define TCTRL4_RD_WR_PI_MORE_DLY_SHIFT 38
+#define TCTRL4_RD_WR_TI_DLY	0x0000003f00000000UL
+#define TCTRL4_RD_WR_TI_DLY_SHIFT     32
+#define TCTRL4_WR_WR_PI_MORE_DLY 0x00000000f8000000UL
+#define TCTRL4_WR_WR_PI_MORE_DLY_SHIFT 27
+#define TCTRL4_WR_WR_TI_DLY	0x0000000007e00000UL
+#define TCTRL4_WR_WR_TI_DLY_SHIFT     21
+#define TCTRL4_RDWR_RD_PI_MORE_DLY 0x00000000001f000UL0
+#define TCTRL4_RDWR_RD_PI_MORE_DLY_SHIFT 16
+#define TCTRL4_R		0x0000000000008000UL
+#define TCTRL4_R_SHIFT		      15
+#define TCTRL4_SDRAM_MODE_REG_DATA 0x0000000000007fffUL
+#define TCTRL4_SDRAM_MODE_REG_DATA_SHIFT 0
+
+/* All 4 memory address decoding registers have the
+ * same layout.
+ */
+#define MEM_DECODE_VALID	0x8000000000000000UL /* Valid */
+#define MEM_DECODE_VALID_SHIFT	      63
+#define MEM_DECODE_UK		0x001ffe0000000000UL /* Upper mask */
+#define MEM_DECODE_UK_SHIFT	      41
+#define MEM_DECODE_UM		0x0000001ffff00000UL /* Upper match */
+#define MEM_DECODE_UM_SHIFT	      20
+#define MEM_DECODE_LK		0x000000000003c000UL /* Lower mask */
+#define MEM_DECODE_LK_SHIFT	      14
+#define MEM_DECODE_LM		0x0000000000000f00UL /* Lower match */
+#define MEM_DECODE_LM_SHIFT           8
+
+#define PA_UPPER_BITS		0x000007fffc000000UL
+#define PA_UPPER_BITS_SHIFT	26
+#define PA_LOWER_BITS		0x00000000000003c0UL
+#define PA_LOWER_BITS_SHIFT	6
+
+#define MACTRL_R0		         0x8000000000000000UL
+#define MACTRL_R0_SHIFT		         63
+#define MACTRL_ADDR_LE_PW                0x7000000000000000UL
+#define MACTRL_ADDR_LE_PW_SHIFT		 60
+#define MACTRL_CMD_PW                    0x0f00000000000000UL
+#define MACTRL_CMD_PW_SHIFT		 56
+#define MACTRL_HALF_MODE_WR_MSEL_DLY     0x00fc000000000000UL
+#define MACTRL_HALF_MODE_WR_MSEL_DLY_SHIFT 50
+#define MACTRL_HALF_MODE_RD_MSEL_DLY     0x0003f00000000000UL
+#define MACTRL_HALF_MODE_RD_MSEL_DLY_SHIFT 44
+#define MACTRL_HALF_MODE_SDRAM_CTL_DLY   0x00000f0000000000UL
+#define MACTRL_HALF_MODE_SDRAM_CTL_DLY_SHIFT 40
+#define MACTRL_HALF_MODE_SDRAM_CLK_DLY   0x000000e000000000UL
+#define MACTRL_HALF_MODE_SDRAM_CLK_DLY_SHIFT 37
+#define MACTRL_R1                        0x0000001000000000UL
+#define MACTRL_R1_SHIFT                      36
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B3 0x0000000f00000000UL
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B3_SHIFT 32
+#define MACTRL_ENC_INTLV_B3              0x00000000f8000000UL
+#define MACTRL_ENC_INTLV_B3_SHIFT              27
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B2 0x0000000007800000UL
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B2_SHIFT 23
+#define MACTRL_ENC_INTLV_B2              0x00000000007c0000UL
+#define MACTRL_ENC_INTLV_B2_SHIFT              18
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B1 0x000000000003c000UL
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B1_SHIFT 14
+#define MACTRL_ENC_INTLV_B1              0x0000000000003e00UL
+#define MACTRL_ENC_INTLV_B1_SHIFT               9
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B0 0x00000000000001e0UL
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B0_SHIFT  5
+#define MACTRL_ENC_INTLV_B0              0x000000000000001fUL
+#define MACTRL_ENC_INTLV_B0_SHIFT               0
+
+#endif /* _SPARC64_CHMCTRL_H */
diff --git a/arch/sparc/include/asm/clock.h b/arch/sparc/include/asm/clock.h
new file mode 100644
index 0000000..2cf99da
--- /dev/null
+++ b/arch/sparc/include/asm/clock.h
@@ -0,0 +1,11 @@
+/*
+ * clock.h:  Definitions for clock operations on the Sparc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_CLOCK_H
+#define _SPARC_CLOCK_H
+
+/* Foo for now. */
+
+#endif /* !(_SPARC_CLOCK_H) */
diff --git a/arch/sparc/include/asm/cmt.h b/arch/sparc/include/asm/cmt.h
new file mode 100644
index 0000000..870db59
--- /dev/null
+++ b/arch/sparc/include/asm/cmt.h
@@ -0,0 +1,59 @@
+#ifndef _SPARC64_CMT_H
+#define _SPARC64_CMT_H
+
+/* cmt.h: Chip Multi-Threading register definitions
+ *
+ * Copyright (C) 2004 David S. Miller (davem@redhat.com)
+ */
+
+/* ASI_CORE_ID - private */
+#define LP_ID		0x0000000000000010UL
+#define  LP_ID_MAX	0x00000000003f0000UL
+#define  LP_ID_ID	0x000000000000003fUL
+
+/* ASI_INTR_ID - private */
+#define LP_INTR_ID	0x0000000000000000UL
+#define  LP_INTR_ID_ID	0x00000000000003ffUL
+
+/* ASI_CESR_ID - private */
+#define CESR_ID		0x0000000000000040UL
+#define  CESR_ID_ID	0x00000000000000ffUL
+
+/* ASI_CORE_AVAILABLE - shared */
+#define LP_AVAIL	0x0000000000000000UL
+#define  LP_AVAIL_1	0x0000000000000002UL
+#define  LP_AVAIL_0	0x0000000000000001UL
+
+/* ASI_CORE_ENABLE_STATUS - shared */
+#define LP_ENAB_STAT	0x0000000000000010UL
+#define  LP_ENAB_STAT_1	0x0000000000000002UL
+#define  LP_ENAB_STAT_0	0x0000000000000001UL
+
+/* ASI_CORE_ENABLE - shared */
+#define LP_ENAB		0x0000000000000020UL
+#define  LP_ENAB_1	0x0000000000000002UL
+#define  LP_ENAB_0	0x0000000000000001UL
+
+/* ASI_CORE_RUNNING - shared */
+#define LP_RUNNING_RW	0x0000000000000050UL
+#define LP_RUNNING_W1S	0x0000000000000060UL
+#define LP_RUNNING_W1C	0x0000000000000068UL
+#define  LP_RUNNING_1	0x0000000000000002UL
+#define  LP_RUNNING_0	0x0000000000000001UL
+
+/* ASI_CORE_RUNNING_STAT - shared */
+#define LP_RUN_STAT	0x0000000000000058UL
+#define  LP_RUN_STAT_1	0x0000000000000002UL
+#define  LP_RUN_STAT_0	0x0000000000000001UL
+
+/* ASI_XIR_STEERING - shared */
+#define LP_XIR_STEER	0x0000000000000030UL
+#define  LP_XIR_STEER_1	0x0000000000000002UL
+#define  LP_XIR_STEER_0	0x0000000000000001UL
+
+/* ASI_CMT_ERROR_STEERING - shared */
+#define CMT_ER_STEER	0x0000000000000040UL
+#define  CMT_ER_STEER_1	0x0000000000000002UL
+#define  CMT_ER_STEER_0	0x0000000000000001UL
+
+#endif /* _SPARC64_CMT_H */
diff --git a/arch/sparc/include/asm/compat.h b/arch/sparc/include/asm/compat.h
new file mode 100644
index 0000000..f260b58
--- /dev/null
+++ b/arch/sparc/include/asm/compat.h
@@ -0,0 +1,243 @@
+#ifndef _ASM_SPARC64_COMPAT_H
+#define _ASM_SPARC64_COMPAT_H
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+
+#define COMPAT_USER_HZ	100
+
+typedef u32		compat_size_t;
+typedef s32		compat_ssize_t;
+typedef s32		compat_time_t;
+typedef s32		compat_clock_t;
+typedef s32		compat_pid_t;
+typedef u16		__compat_uid_t;
+typedef u16		__compat_gid_t;
+typedef u32		__compat_uid32_t;
+typedef u32		__compat_gid32_t;
+typedef u16		compat_mode_t;
+typedef u32		compat_ino_t;
+typedef u16		compat_dev_t;
+typedef s32		compat_off_t;
+typedef s64		compat_loff_t;
+typedef s16		compat_nlink_t;
+typedef u16		compat_ipc_pid_t;
+typedef s32		compat_daddr_t;
+typedef u32		compat_caddr_t;
+typedef __kernel_fsid_t	compat_fsid_t;
+typedef s32		compat_key_t;
+typedef s32		compat_timer_t;
+
+typedef s32		compat_int_t;
+typedef s32		compat_long_t;
+typedef s64		compat_s64;
+typedef u32		compat_uint_t;
+typedef u32		compat_ulong_t;
+typedef u64		compat_u64;
+
+struct compat_timespec {
+	compat_time_t	tv_sec;
+	s32		tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t	tv_sec;
+	s32		tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t	st_dev;
+	compat_ino_t	st_ino;
+	compat_mode_t	st_mode;
+	compat_nlink_t	st_nlink;
+	__compat_uid_t	st_uid;
+	__compat_gid_t	st_gid;
+	compat_dev_t	st_rdev;
+	compat_off_t	st_size;
+	compat_time_t	st_atime;
+	compat_ulong_t	st_atime_nsec;
+	compat_time_t	st_mtime;
+	compat_ulong_t	st_mtime_nsec;
+	compat_time_t	st_ctime;
+	compat_ulong_t	st_ctime_nsec;
+	compat_off_t	st_blksize;
+	compat_off_t	st_blocks;
+	u32		__unused4[2];
+};
+
+struct compat_stat64 {
+	unsigned long long	st_dev;
+
+	unsigned long long	st_ino;
+
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+
+	unsigned long long	st_rdev;
+
+	unsigned char	__pad3[8];
+
+	long long	st_size;
+	unsigned int	st_blksize;
+
+	unsigned char	__pad4[8];
+	unsigned int	st_blocks;
+
+	unsigned int	st_atime;
+	unsigned int	st_atime_nsec;
+
+	unsigned int	st_mtime;
+	unsigned int	st_mtime_nsec;
+
+	unsigned int	st_ctime;
+	unsigned int	st_ctime_nsec;
+
+	unsigned int	__unused4;
+	unsigned int	__unused5;
+};
+
+struct compat_flock {
+	short		l_type;
+	short		l_whence;
+	compat_off_t	l_start;
+	compat_off_t	l_len;
+	compat_pid_t	l_pid;
+	short		__unused;
+};
+
+#define F_GETLK64	12
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+struct compat_flock64 {
+	short		l_type;
+	short		l_whence;
+	compat_loff_t	l_start;
+	compat_loff_t	l_len;
+	compat_pid_t	l_pid;
+	short		__unused;
+};
+
+struct compat_statfs {
+	int		f_type;
+	int		f_bsize;
+	int		f_blocks;
+	int		f_bfree;
+	int		f_bavail;
+	int		f_files;
+	int		f_ffree;
+	compat_fsid_t	f_fsid;
+	int		f_namelen;	/* SunOS ignores this field. */
+	int		f_frsize;
+	int		f_spare[5];
+};
+
+#define COMPAT_RLIM_INFINITY 0x7fffffff
+
+typedef u32		compat_old_sigset_t;
+
+#define _COMPAT_NSIG		64
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32		compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately converted them already.
+ */
+typedef	u32		compat_uptr_t;
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+	return (void __user *)(unsigned long)uptr;
+}
+
+static inline compat_uptr_t ptr_to_compat(void __user *uptr)
+{
+	return (u32)(unsigned long)uptr;
+}
+
+static inline void __user *compat_alloc_user_space(long len)
+{
+	struct pt_regs *regs = current_thread_info()->kregs;
+	unsigned long usp = regs->u_regs[UREG_I6];
+
+	if (!(test_thread_flag(TIF_32BIT)))
+		usp += STACK_BIAS;
+	else
+		usp &= 0xffffffffUL;
+
+	usp -= len;
+	usp &= ~0x7UL;
+
+	return (void __user *) usp;
+}
+
+struct compat_ipc64_perm {
+	compat_key_t key;
+	__compat_uid32_t uid;
+	__compat_gid32_t gid;
+	__compat_uid32_t cuid;
+	__compat_gid32_t cgid;
+	unsigned short __pad1;
+	compat_mode_t mode;
+	unsigned short __pad2;
+	unsigned short seq;
+	unsigned long __unused1;	/* yes they really are 64bit pads */
+	unsigned long __unused2;
+};
+
+struct compat_semid64_ds {
+	struct compat_ipc64_perm sem_perm;
+	unsigned int	__pad1;
+	compat_time_t	sem_otime;
+	unsigned int	__pad2;
+	compat_time_t	sem_ctime;
+	u32		sem_nsems;
+	u32		__unused1;
+	u32		__unused2;
+};
+
+struct compat_msqid64_ds {
+	struct compat_ipc64_perm msg_perm;
+	unsigned int	__pad1;
+	compat_time_t	msg_stime;
+	unsigned int	__pad2;
+	compat_time_t	msg_rtime;
+	unsigned int	__pad3;
+	compat_time_t	msg_ctime;
+	unsigned int	msg_cbytes;
+	unsigned int	msg_qnum;
+	unsigned int	msg_qbytes;
+	compat_pid_t	msg_lspid;
+	compat_pid_t	msg_lrpid;
+	unsigned int	__unused1;
+	unsigned int	__unused2;
+};
+
+struct compat_shmid64_ds {
+	struct compat_ipc64_perm shm_perm;
+	unsigned int	__pad1;
+	compat_time_t	shm_atime;
+	unsigned int	__pad2;
+	compat_time_t	shm_dtime;
+	unsigned int	__pad3;
+	compat_time_t	shm_ctime;
+	compat_size_t	shm_segsz;
+	compat_pid_t	shm_cpid;
+	compat_pid_t	shm_lpid;
+	unsigned int	shm_nattch;
+	unsigned int	__unused1;
+	unsigned int	__unused2;
+};
+
+#endif /* _ASM_SPARC64_COMPAT_H */
diff --git a/arch/sparc/include/asm/compat_signal.h b/arch/sparc/include/asm/compat_signal.h
new file mode 100644
index 0000000..b759eab
--- /dev/null
+++ b/arch/sparc/include/asm/compat_signal.h
@@ -0,0 +1,29 @@
+#ifndef _COMPAT_SIGNAL_H
+#define _COMPAT_SIGNAL_H
+
+#include <linux/compat.h>
+#include <asm/signal.h>
+
+#ifdef CONFIG_COMPAT
+struct __new_sigaction32 {
+	unsigned		sa_handler;
+	unsigned int    	sa_flags;
+	unsigned		sa_restorer;     /* not used by Linux/SPARC yet */
+	compat_sigset_t 	sa_mask;
+};
+
+struct __old_sigaction32 {
+	unsigned		sa_handler;
+	compat_old_sigset_t  	sa_mask;
+	unsigned int    	sa_flags;
+	unsigned		sa_restorer;     /* not used by Linux/SPARC yet */
+};
+
+typedef struct sigaltstack32 {
+	u32			ss_sp;
+	int			ss_flags;
+	compat_size_t		ss_size;
+} stack_t32;
+#endif
+
+#endif /* !(_COMPAT_SIGNAL_H) */
diff --git a/arch/sparc/include/asm/contregs.h b/arch/sparc/include/asm/contregs.h
new file mode 100644
index 0000000..48fa8a4
--- /dev/null
+++ b/arch/sparc/include/asm/contregs.h
@@ -0,0 +1,53 @@
+#ifndef _SPARC_CONTREGS_H
+#define _SPARC_CONTREGS_H
+
+/* contregs.h:  Addresses of registers in the ASI_CONTROL alternate address
+ *              space. These are for the mmu's context register, etc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* 3=sun3
+   4=sun4 (as in sun4 sysmaint student book)
+   c=sun4c (according to davem) */
+
+#define AC_IDPROM     0x00000000    /* 34  ID PROM, R/O, byte, 32 bytes      */
+#define AC_PAGEMAP    0x10000000    /* 3   Pagemap R/W, long                 */
+#define AC_SEGMAP     0x20000000    /* 3   Segment map, byte                 */
+#define AC_CONTEXT    0x30000000    /* 34c current mmu-context               */
+#define AC_SENABLE    0x40000000    /* 34c system dvma/cache/reset enable reg*/
+#define AC_UDVMA_ENB  0x50000000    /* 34  Not used on Sun boards, byte      */
+#define AC_BUS_ERROR  0x60000000    /* 34  Not cleared on read, byte.        */
+#define AC_SYNC_ERR   0x60000000    /*  c fault type                         */
+#define AC_SYNC_VA    0x60000004    /*  c fault virtual address              */
+#define AC_ASYNC_ERR  0x60000008    /*  c asynchronous fault type            */
+#define AC_ASYNC_VA   0x6000000c    /*  c async fault virtual address        */
+#define AC_LEDS       0x70000000    /* 34  Zero turns on LEDs, byte          */
+#define AC_CACHETAGS  0x80000000    /* 34c direct access to the VAC tags     */
+#define AC_CACHEDDATA 0x90000000    /* 3 c direct access to the VAC data     */
+#define AC_UDVMA_MAP  0xD0000000    /* 4  Not used on Sun boards, byte       */
+#define AC_VME_VECTOR 0xE0000000    /* 4  For non-Autovector VME, byte       */
+#define AC_BOOT_SCC   0xF0000000    /* 34  bypass to access Zilog 8530. byte.*/
+
+/* s=Swift, h=Ross_HyperSPARC, v=TI_Viking, t=Tsunami, r=Ross_Cypress        */
+#define AC_M_PCR      0x0000        /* shv Processor Control Reg             */
+#define AC_M_CTPR     0x0100        /* shv Context Table Pointer Reg         */
+#define AC_M_CXR      0x0200        /* shv Context Register                  */
+#define AC_M_SFSR     0x0300        /* shv Synchronous Fault Status Reg      */
+#define AC_M_SFAR     0x0400        /* shv Synchronous Fault Address Reg     */
+#define AC_M_AFSR     0x0500        /*  hv Asynchronous Fault Status Reg     */
+#define AC_M_AFAR     0x0600        /*  hv Asynchronous Fault Address Reg    */
+#define AC_M_RESET    0x0700        /*  hv Reset Reg                         */
+#define AC_M_RPR      0x1000        /*  hv Root Pointer Reg                  */
+#define AC_M_TSUTRCR  0x1000        /* s   TLB Replacement Ctrl Reg          */
+#define AC_M_IAPTP    0x1100        /*  hv Instruction Access PTP            */
+#define AC_M_DAPTP    0x1200        /*  hv Data Access PTP                   */
+#define AC_M_ITR      0x1300        /*  hv Index Tag Register                */
+#define AC_M_TRCR     0x1400        /*  hv TLB Replacement Control Reg       */
+#define AC_M_SFSRX    0x1300        /* s   Synch Fault Status Reg prim       */
+#define AC_M_SFARX    0x1400        /* s   Synch Fault Address Reg prim      */
+#define AC_M_RPR1     0x1500        /*  h  Root Pointer Reg (entry 2)        */
+#define AC_M_IAPTP1   0x1600        /*  h  Instruction Access PTP (entry 2)  */
+#define AC_M_DAPTP1   0x1700        /*  h  Data Access PTP (entry 2)         */
+
+#endif /* _SPARC_CONTREGS_H */
diff --git a/arch/sparc/include/asm/cpudata.h b/arch/sparc/include/asm/cpudata.h
new file mode 100644
index 0000000..b5976de
--- /dev/null
+++ b/arch/sparc/include/asm/cpudata.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_CPUDATA_H
+#define ___ASM_SPARC_CPUDATA_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/cpudata_64.h>
+#else
+#include <asm/cpudata_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/cpudata_32.h b/arch/sparc/include/asm/cpudata_32.h
new file mode 100644
index 0000000..31d48a0
--- /dev/null
+++ b/arch/sparc/include/asm/cpudata_32.h
@@ -0,0 +1,27 @@
+/* cpudata.h: Per-cpu parameters.
+ *
+ * Copyright (C) 2004 Keith M Wesolowski (wesolows@foobazco.org)
+ *
+ * Based on include/asm/cpudata.h and Linux 2.4 smp.h
+ * both (C) David S. Miller.
+ */
+
+#ifndef _SPARC_CPUDATA_H
+#define _SPARC_CPUDATA_H
+
+#include <linux/percpu.h>
+
+typedef struct {
+	unsigned long udelay_val;
+	unsigned long clock_tick;
+	unsigned int multiplier;
+	unsigned int counter;
+	int prom_node;
+	int mid;
+	int next;
+} cpuinfo_sparc;
+
+DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data);
+#define cpu_data(__cpu) per_cpu(__cpu_data, (__cpu))
+
+#endif /* _SPARC_CPUDATA_H */
diff --git a/arch/sparc/include/asm/cpudata_64.h b/arch/sparc/include/asm/cpudata_64.h
new file mode 100644
index 0000000..532975e
--- /dev/null
+++ b/arch/sparc/include/asm/cpudata_64.h
@@ -0,0 +1,240 @@
+/* cpudata.h: Per-cpu parameters.
+ *
+ * Copyright (C) 2003, 2005, 2006 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC64_CPUDATA_H
+#define _SPARC64_CPUDATA_H
+
+#include <asm/hypervisor.h>
+#include <asm/asi.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/percpu.h>
+#include <linux/threads.h>
+
+typedef struct {
+	/* Dcache line 1 */
+	unsigned int	__softirq_pending; /* must be 1st, see rtrap.S */
+	unsigned int	__pad0;
+	unsigned long	clock_tick;	/* %tick's per second */
+	unsigned long	__pad;
+	unsigned int	__pad1;
+	unsigned int	__pad2;
+
+	/* Dcache line 2, rarely used */
+	unsigned int	dcache_size;
+	unsigned int	dcache_line_size;
+	unsigned int	icache_size;
+	unsigned int	icache_line_size;
+	unsigned int	ecache_size;
+	unsigned int	ecache_line_size;
+	int		core_id;
+	int		proc_id;
+} cpuinfo_sparc;
+
+DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data);
+#define cpu_data(__cpu)		per_cpu(__cpu_data, (__cpu))
+#define local_cpu_data()	__get_cpu_var(__cpu_data)
+
+/* Trap handling code needs to get at a few critical values upon
+ * trap entry and to process TSB misses.  These cannot be in the
+ * per_cpu() area as we really need to lock them into the TLB and
+ * thus make them part of the main kernel image.  As a result we
+ * try to make this as small as possible.
+ *
+ * This is padded out and aligned to 64-bytes to avoid false sharing
+ * on SMP.
+ */
+
+/* If you modify the size of this structure, please update
+ * TRAP_BLOCK_SZ_SHIFT below.
+ */
+struct thread_info;
+struct trap_per_cpu {
+/* D-cache line 1: Basic thread information, cpu and device mondo queues */
+	struct thread_info	*thread;
+	unsigned long		pgd_paddr;
+	unsigned long		cpu_mondo_pa;
+	unsigned long		dev_mondo_pa;
+
+/* D-cache line 2: Error Mondo Queue and kernel buffer pointers */
+	unsigned long		resum_mondo_pa;
+	unsigned long		resum_kernel_buf_pa;
+	unsigned long		nonresum_mondo_pa;
+	unsigned long		nonresum_kernel_buf_pa;
+
+/* Dcache lines 3, 4, 5, and 6: Hypervisor Fault Status */
+	struct hv_fault_status	fault_info;
+
+/* Dcache line 7: Physical addresses of CPU send mondo block and CPU list.  */
+	unsigned long		cpu_mondo_block_pa;
+	unsigned long		cpu_list_pa;
+	unsigned long		tsb_huge;
+	unsigned long		tsb_huge_temp;
+
+/* Dcache line 8: IRQ work list, and keep trap_block a power-of-2 in size.  */
+	unsigned long		irq_worklist_pa;
+	unsigned int		cpu_mondo_qmask;
+	unsigned int		dev_mondo_qmask;
+	unsigned int		resum_qmask;
+	unsigned int		nonresum_qmask;
+	void			*hdesc;
+} __attribute__((aligned(64)));
+extern struct trap_per_cpu trap_block[NR_CPUS];
+extern void init_cur_cpu_trap(struct thread_info *);
+extern void setup_tba(void);
+extern int ncpus_probed;
+extern void __init cpu_probe(void);
+extern const struct seq_operations cpuinfo_op;
+
+extern unsigned long real_hard_smp_processor_id(void);
+
+struct cpuid_patch_entry {
+	unsigned int	addr;
+	unsigned int	cheetah_safari[4];
+	unsigned int	cheetah_jbus[4];
+	unsigned int	starfire[4];
+	unsigned int	sun4v[4];
+};
+extern struct cpuid_patch_entry __cpuid_patch, __cpuid_patch_end;
+
+struct sun4v_1insn_patch_entry {
+	unsigned int	addr;
+	unsigned int	insn;
+};
+extern struct sun4v_1insn_patch_entry __sun4v_1insn_patch,
+	__sun4v_1insn_patch_end;
+
+struct sun4v_2insn_patch_entry {
+	unsigned int	addr;
+	unsigned int	insns[2];
+};
+extern struct sun4v_2insn_patch_entry __sun4v_2insn_patch,
+	__sun4v_2insn_patch_end;
+
+#endif /* !(__ASSEMBLY__) */
+
+#define TRAP_PER_CPU_THREAD		0x00
+#define TRAP_PER_CPU_PGD_PADDR		0x08
+#define TRAP_PER_CPU_CPU_MONDO_PA	0x10
+#define TRAP_PER_CPU_DEV_MONDO_PA	0x18
+#define TRAP_PER_CPU_RESUM_MONDO_PA	0x20
+#define TRAP_PER_CPU_RESUM_KBUF_PA	0x28
+#define TRAP_PER_CPU_NONRESUM_MONDO_PA	0x30
+#define TRAP_PER_CPU_NONRESUM_KBUF_PA	0x38
+#define TRAP_PER_CPU_FAULT_INFO		0x40
+#define TRAP_PER_CPU_CPU_MONDO_BLOCK_PA	0xc0
+#define TRAP_PER_CPU_CPU_LIST_PA	0xc8
+#define TRAP_PER_CPU_TSB_HUGE		0xd0
+#define TRAP_PER_CPU_TSB_HUGE_TEMP	0xd8
+#define TRAP_PER_CPU_IRQ_WORKLIST_PA	0xe0
+#define TRAP_PER_CPU_CPU_MONDO_QMASK	0xe8
+#define TRAP_PER_CPU_DEV_MONDO_QMASK	0xec
+#define TRAP_PER_CPU_RESUM_QMASK	0xf0
+#define TRAP_PER_CPU_NONRESUM_QMASK	0xf4
+
+#define TRAP_BLOCK_SZ_SHIFT		8
+
+#include <asm/scratchpad.h>
+
+#define __GET_CPUID(REG)				\
+	/* Spitfire implementation (default). */	\
+661:	ldxa		[%g0] ASI_UPA_CONFIG, REG;	\
+	srlx		REG, 17, REG;			\
+	 and		REG, 0x1f, REG;			\
+	nop;						\
+	.section	.cpuid_patch, "ax";		\
+	/* Instruction location. */			\
+	.word		661b;				\
+	/* Cheetah Safari implementation. */		\
+	ldxa		[%g0] ASI_SAFARI_CONFIG, REG;	\
+	srlx		REG, 17, REG;			\
+	and		REG, 0x3ff, REG;		\
+	nop;						\
+	/* Cheetah JBUS implementation. */		\
+	ldxa		[%g0] ASI_JBUS_CONFIG, REG;	\
+	srlx		REG, 17, REG;			\
+	and		REG, 0x1f, REG;			\
+	nop;						\
+	/* Starfire implementation. */			\
+	sethi		%hi(0x1fff40000d0 >> 9), REG;	\
+	sllx		REG, 9, REG;			\
+	or		REG, 0xd0, REG;			\
+	lduwa		[REG] ASI_PHYS_BYPASS_EC_E, REG;\
+	/* sun4v implementation. */			\
+	mov		SCRATCHPAD_CPUID, REG;		\
+	ldxa		[REG] ASI_SCRATCHPAD, REG;	\
+	nop;						\
+	nop;						\
+	.previous;
+
+#ifdef CONFIG_SMP
+
+#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	__GET_CPUID(TMP)			\
+	sethi	%hi(trap_block), DEST;		\
+	sllx	TMP, TRAP_BLOCK_SZ_SHIFT, TMP;	\
+	or	DEST, %lo(trap_block), DEST;	\
+	add	DEST, TMP, DEST;		\
+
+/* Clobbers TMP, current address space PGD phys address into DEST.  */
+#define TRAP_LOAD_PGD_PHYS(DEST, TMP)		\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	ldx	[DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
+
+/* Clobbers TMP, loads local processor's IRQ work area into DEST.  */
+#define TRAP_LOAD_IRQ_WORK_PA(DEST, TMP)	\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	add	DEST, TRAP_PER_CPU_IRQ_WORKLIST_PA, DEST;
+
+/* Clobbers TMP, loads DEST with current thread info pointer.  */
+#define TRAP_LOAD_THREAD_REG(DEST, TMP)		\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	ldx	[DEST + TRAP_PER_CPU_THREAD], DEST;
+
+/* Given the current thread info pointer in THR, load the per-cpu
+ * area base of the current processor into DEST.  REG1, REG2, and REG3 are
+ * clobbered.
+ *
+ * You absolutely cannot use DEST as a temporary in this code.  The
+ * reason is that traps can happen during execution, and return from
+ * trap will load the fully resolved DEST per-cpu base.  This can corrupt
+ * the calculations done by the macro mid-stream.
+ */
+#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3)	\
+	lduh	[THR + TI_CPU], REG1;			\
+	sethi	%hi(__per_cpu_shift), REG3;		\
+	sethi	%hi(__per_cpu_base), REG2;		\
+	ldx	[REG3 + %lo(__per_cpu_shift)], REG3;	\
+	ldx	[REG2 + %lo(__per_cpu_base)], REG2;	\
+	sllx	REG1, REG3, REG3;			\
+	add	REG3, REG2, DEST;
+
+#else
+
+#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	sethi	%hi(trap_block), DEST;		\
+	or	DEST, %lo(trap_block), DEST;	\
+
+/* Uniprocessor versions, we know the cpuid is zero.  */
+#define TRAP_LOAD_PGD_PHYS(DEST, TMP)		\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	ldx	[DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
+
+/* Clobbers TMP, loads local processor's IRQ work area into DEST.  */
+#define TRAP_LOAD_IRQ_WORK_PA(DEST, TMP)	\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	add	DEST, TRAP_PER_CPU_IRQ_WORKLIST_PA, DEST;
+
+#define TRAP_LOAD_THREAD_REG(DEST, TMP)		\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	ldx	[DEST + TRAP_PER_CPU_THREAD], DEST;
+
+/* No per-cpu areas on uniprocessor, so no need to load DEST.  */
+#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3)
+
+#endif /* !(CONFIG_SMP) */
+
+#endif /* _SPARC64_CPUDATA_H */
diff --git a/arch/sparc/include/asm/cputime.h b/arch/sparc/include/asm/cputime.h
new file mode 100644
index 0000000..1a642b8
--- /dev/null
+++ b/arch/sparc/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __SPARC_CPUTIME_H
+#define __SPARC_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __SPARC_CPUTIME_H */
diff --git a/arch/sparc/include/asm/current.h b/arch/sparc/include/asm/current.h
new file mode 100644
index 0000000..10a0df5
--- /dev/null
+++ b/arch/sparc/include/asm/current.h
@@ -0,0 +1,34 @@
+/* include/asm/current.h
+ *
+ * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright (C) 2002 Pete Zaitcev (zaitcev@yahoo.com)
+ * Copyright (C) 2007 David S. Miller (davem@davemloft.net)
+ *
+ *  Derived from "include/asm-s390/current.h" by
+ *  Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *  Derived from "include/asm-i386/current.h"
+*/
+#ifndef _SPARC_CURRENT_H
+#define _SPARC_CURRENT_H
+
+#include <linux/thread_info.h>
+
+#ifdef CONFIG_SPARC64
+register struct task_struct *current asm("g4");
+#endif
+
+#ifdef CONFIG_SPARC32
+/* We might want to consider using %g4 like sparc64 to shave a few cycles.
+ *
+ * Two stage process (inline + #define) for type-checking.
+ * We also obfuscate get_current() to check if anyone used that by mistake.
+ */
+struct task_struct;
+static inline struct task_struct *__get_current(void)
+{
+	return current_thread_info()->task;
+}
+#define current __get_current()
+#endif
+
+#endif /* !(_SPARC_CURRENT_H) */
diff --git a/arch/sparc/include/asm/cypress.h b/arch/sparc/include/asm/cypress.h
new file mode 100644
index 0000000..95e9772
--- /dev/null
+++ b/arch/sparc/include/asm/cypress.h
@@ -0,0 +1,79 @@
+/*
+ * cypress.h: Cypress module specific definitions and defines.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_CYPRESS_H
+#define _SPARC_CYPRESS_H
+
+/* Cypress chips have %psr 'impl' of '0001' and 'vers' of '0001'. */
+
+/* The MMU control register fields on the Sparc Cypress 604/605 MMU's.
+ *
+ * ---------------------------------------------------------------
+ * |implvers| MCA | MCM |MV| MID |BM| C|RSV|MR|CM|CL|CE|RSV|NF|ME|
+ * ---------------------------------------------------------------
+ *  31    24 23-22 21-20 19 18-15 14 13  12 11 10  9  8 7-2  1  0
+ *
+ * MCA: MultiChip Access -- Used for configuration of multiple
+ *      CY7C604/605 cache units.
+ * MCM: MultiChip Mask -- Again, for multiple cache unit config.
+ * MV: MultiChip Valid -- Indicates MCM and MCA have valid settings.
+ * MID: ModuleID -- Unique processor ID for MBus transactions. (605 only)
+ * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
+ * C: Cacheable -- Indicates whether accesses are cacheable while
+ *    the MMU is off.  0=no 1=yes
+ * MR: MemoryReflection -- Indicates whether the bus attached to the
+ *     MBus supports memory reflection. 0=no 1=yes (605 only)
+ * CM: CacheMode -- Indicates whether the cache is operating in write
+ *     through or copy-back mode. 0=write-through 1=copy-back
+ * CL: CacheLock -- Indicates if the entire cache is locked or not.
+ *     0=not-locked 1=locked  (604 only)
+ * CE: CacheEnable -- Is the virtual cache on? 0=no 1=yes
+ * NF: NoFault -- Do faults generate traps? 0=yes 1=no
+ * ME: MmuEnable -- Is the MMU doing translations? 0=no 1=yes
+ */
+
+#define CYPRESS_MCA       0x00c00000
+#define CYPRESS_MCM       0x00300000
+#define CYPRESS_MVALID    0x00080000
+#define CYPRESS_MIDMASK   0x00078000   /* Only on 605 */
+#define CYPRESS_BMODE     0x00004000
+#define CYPRESS_ACENABLE  0x00002000
+#define CYPRESS_MRFLCT    0x00000800   /* Only on 605 */
+#define CYPRESS_CMODE     0x00000400
+#define CYPRESS_CLOCK     0x00000200   /* Only on 604 */
+#define CYPRESS_CENABLE   0x00000100
+#define CYPRESS_NFAULT    0x00000002
+#define CYPRESS_MENABLE   0x00000001
+
+static inline void cypress_flush_page(unsigned long page)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (page), "i" (ASI_M_FLUSH_PAGE));
+}
+
+static inline void cypress_flush_segment(unsigned long addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_SEG));
+}
+
+static inline void cypress_flush_region(unsigned long addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_REGION));
+}
+
+static inline void cypress_flush_context(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" : :
+			     "i" (ASI_M_FLUSH_CTX));
+}
+
+/* XXX Displacement flushes for buggy chips and initial testing
+ * XXX go here.
+ */
+
+#endif /* !(_SPARC_CYPRESS_H) */
diff --git a/arch/sparc/include/asm/dcr.h b/arch/sparc/include/asm/dcr.h
new file mode 100644
index 0000000..620c9ba
--- /dev/null
+++ b/arch/sparc/include/asm/dcr.h
@@ -0,0 +1,14 @@
+#ifndef _SPARC64_DCR_H
+#define _SPARC64_DCR_H
+
+/* UltraSparc-III/III+ Dispatch Control Register, ASR 0x12 */
+#define DCR_DPE		0x0000000000001000 /* III+: D$ Parity Error Enable	*/
+#define DCR_OBS		0x0000000000000fc0 /* Observability Bus Controls	*/
+#define DCR_BPE		0x0000000000000020 /* Branch Predict Enable		*/
+#define DCR_RPE		0x0000000000000010 /* Return Address Prediction Enable	*/
+#define DCR_SI		0x0000000000000008 /* Single Instruction Disable	*/
+#define DCR_IPE		0x0000000000000004 /* III+: I$ Parity Error Enable	*/
+#define DCR_IFPOE	0x0000000000000002 /* IRQ FP Operation Enable		*/
+#define DCR_MS		0x0000000000000001 /* Multi-Scalar dispatch		*/
+
+#endif /* _SPARC64_DCR_H */
diff --git a/arch/sparc/include/asm/dcu.h b/arch/sparc/include/asm/dcu.h
new file mode 100644
index 0000000..0f704e10
--- /dev/null
+++ b/arch/sparc/include/asm/dcu.h
@@ -0,0 +1,27 @@
+#ifndef _SPARC64_DCU_H
+#define _SPARC64_DCU_H
+
+#include <linux/const.h>
+
+/* UltraSparc-III Data Cache Unit Control Register */
+#define DCU_CP	_AC(0x0002000000000000,UL) /* Phys Cache Enable w/o mmu	*/
+#define DCU_CV	_AC(0x0001000000000000,UL) /* Virt Cache Enable w/o mmu	*/
+#define DCU_ME	_AC(0x0000800000000000,UL) /* NC-store Merging Enable	*/
+#define DCU_RE	_AC(0x0000400000000000,UL) /* RAW bypass Enable		*/
+#define DCU_PE	_AC(0x0000200000000000,UL) /* PCache Enable		*/
+#define DCU_HPE	_AC(0x0000100000000000,UL) /* HW prefetch Enable	*/
+#define DCU_SPE	_AC(0x0000080000000000,UL) /* SW prefetch Enable	*/
+#define DCU_SL	_AC(0x0000040000000000,UL) /* Secondary ld-steering Enab*/
+#define DCU_WE	_AC(0x0000020000000000,UL) /* WCache enable		*/
+#define DCU_PM	_AC(0x000001fe00000000,UL) /* PA Watchpoint Byte Mask	*/
+#define DCU_VM	_AC(0x00000001fe000000,UL) /* VA Watchpoint Byte Mask	*/
+#define DCU_PR	_AC(0x0000000001000000,UL) /* PA Watchpoint Read Enable	*/
+#define DCU_PW	_AC(0x0000000000800000,UL) /* PA Watchpoint Write Enable*/
+#define DCU_VR	_AC(0x0000000000400000,UL) /* VA Watchpoint Read Enable	*/
+#define DCU_VW	_AC(0x0000000000200000,UL) /* VA Watchpoint Write Enable*/
+#define DCU_DM	_AC(0x0000000000000008,UL) /* DMMU Enable		*/
+#define DCU_IM	_AC(0x0000000000000004,UL) /* IMMU Enable		*/
+#define DCU_DC	_AC(0x0000000000000002,UL) /* Data Cache Enable		*/
+#define DCU_IC	_AC(0x0000000000000001,UL) /* Instruction Cache Enable	*/
+
+#endif /* _SPARC64_DCU_H */
diff --git a/arch/sparc/include/asm/delay.h b/arch/sparc/include/asm/delay.h
new file mode 100644
index 0000000..467caa2
--- /dev/null
+++ b/arch/sparc/include/asm/delay.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_DELAY_H
+#define ___ASM_SPARC_DELAY_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/delay_64.h>
+#else
+#include <asm/delay_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/delay_32.h b/arch/sparc/include/asm/delay_32.h
new file mode 100644
index 0000000..bc9aba2
--- /dev/null
+++ b/arch/sparc/include/asm/delay_32.h
@@ -0,0 +1,34 @@
+/*
+ * delay.h: Linux delay routines on the Sparc.
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu).
+ */
+
+#ifndef __SPARC_DELAY_H
+#define __SPARC_DELAY_H
+
+#include <asm/cpudata.h>
+
+static inline void __delay(unsigned long loops)
+{
+	__asm__ __volatile__("cmp %0, 0\n\t"
+			     "1: bne 1b\n\t"
+			     "subcc %0, 1, %0\n" :
+			     "=&r" (loops) :
+			     "0" (loops) :
+			     "cc");
+}
+
+/* This is too messy with inline asm on the Sparc. */
+extern void __udelay(unsigned long usecs, unsigned long lpj);
+extern void __ndelay(unsigned long nsecs, unsigned long lpj);
+
+#ifdef CONFIG_SMP
+#define __udelay_val	cpu_data(smp_processor_id()).udelay_val
+#else /* SMP */
+#define __udelay_val	loops_per_jiffy
+#endif /* SMP */
+#define udelay(__usecs)	__udelay(__usecs, __udelay_val)
+#define ndelay(__nsecs)	__ndelay(__nsecs, __udelay_val)
+
+#endif /* defined(__SPARC_DELAY_H) */
diff --git a/arch/sparc/include/asm/delay_64.h b/arch/sparc/include/asm/delay_64.h
new file mode 100644
index 0000000..a77aa62
--- /dev/null
+++ b/arch/sparc/include/asm/delay_64.h
@@ -0,0 +1,17 @@
+/* delay.h: Linux delay routines on sparc64.
+ *
+ * Copyright (C) 1996, 2004, 2007 David S. Miller (davem@davemloft.net).
+ */
+
+#ifndef _SPARC64_DELAY_H
+#define _SPARC64_DELAY_H
+
+#ifndef __ASSEMBLY__
+
+extern void __delay(unsigned long loops);
+extern void udelay(unsigned long usecs);
+#define mdelay(n)	udelay((n) * 1000)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _SPARC64_DELAY_H */
diff --git a/arch/sparc/include/asm/device.h b/arch/sparc/include/asm/device.h
new file mode 100644
index 0000000..19790eb
--- /dev/null
+++ b/arch/sparc/include/asm/device.h
@@ -0,0 +1,23 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#ifndef _ASM_SPARC_DEVICE_H
+#define _ASM_SPARC_DEVICE_H
+
+struct device_node;
+struct of_device;
+
+struct dev_archdata {
+	void			*iommu;
+	void			*stc;
+	void			*host_controller;
+
+	struct device_node	*prom_node;
+	struct of_device	*op;
+
+	int			numa_node;
+};
+
+#endif /* _ASM_SPARC_DEVICE_H */
diff --git a/arch/sparc/include/asm/display7seg.h b/arch/sparc/include/asm/display7seg.h
new file mode 100644
index 0000000..86d4a90
--- /dev/null
+++ b/arch/sparc/include/asm/display7seg.h
@@ -0,0 +1,79 @@
+/*
+ *
+ * display7seg - Driver interface for the 7-segment display
+ * present on Sun Microsystems CP1400 and CP1500
+ *
+ * Copyright (c) 2000 Eric Brower <ebrower@usa.net>
+ *
+ */
+
+#ifndef __display7seg_h__
+#define __display7seg_h__
+
+#define D7S_IOC	'p'
+
+#define D7SIOCRD _IOR(D7S_IOC, 0x45, int)	/* Read device state	*/
+#define D7SIOCWR _IOW(D7S_IOC, 0x46, int)	/* Write device state	*/
+#define D7SIOCTM _IO (D7S_IOC, 0x47)		/* Translate mode (FLIP)*/
+
+/*
+ * ioctl flag definitions
+ *
+ * POINT	- Toggle decimal point	(0=absent 1=present)
+ * ALARM	- Toggle alarm LED 		(0=green  1=red)
+ * FLIP		- Toggle inverted mode 	(0=normal 1=flipped)
+ * bits 0-4	- Character displayed	(see definitions below)
+ *
+ * Display segments are defined as follows,
+ * subject to D7S_FLIP register state:
+ *
+ *    a
+ *   ---
+ * f|   |b
+ *   -g-
+ * e|   |c
+ *   ---
+ *    d
+ */
+
+#define D7S_POINT	(1 << 7)	/* Decimal point*/
+#define D7S_ALARM	(1 << 6)	/* Alarm LED 	*/
+#define D7S_FLIP	(1 << 5)	/* Flip display */
+
+#define D7S_0		0x00		/* Numerals 0-9 */
+#define D7S_1		0x01
+#define D7S_2		0x02
+#define D7S_3		0x03
+#define D7S_4		0x04
+#define D7S_5		0x05
+#define D7S_6		0x06
+#define D7S_7		0x07
+#define D7S_8		0x08
+#define D7S_9		0x09
+#define D7S_A		0x0A		/* Letters A-F, H, L, P */
+#define D7S_B		0x0B
+#define D7S_C		0x0C
+#define D7S_D		0x0D
+#define D7S_E		0x0E
+#define D7S_F		0x0F
+#define D7S_H		0x10
+#define D7S_E2		0x11
+#define D7S_L		0x12
+#define D7S_P		0x13
+#define D7S_SEGA	0x14		/* Individual segments */
+#define D7S_SEGB	0x15
+#define D7S_SEGC	0x16
+#define D7S_SEGD	0x17
+#define D7S_SEGE	0x18
+#define D7S_SEGF	0x19
+#define D7S_SEGG	0x1A
+#define D7S_SEGABFG 0x1B		/* Segment groupings */
+#define D7S_SEGCDEG	0x1C
+#define D7S_SEGBCEF 0x1D
+#define D7S_SEGADG	0x1E
+#define D7S_BLANK	0x1F		/* Clear all segments */
+
+#define D7S_MIN_VAL	0x0
+#define D7S_MAX_VAL	0x1F
+
+#endif /* ifndef __display7seg_h__ */
diff --git a/arch/sparc/include/asm/div64.h b/arch/sparc/include/asm/div64.h
new file mode 100644
index 0000000..6cd978c
--- /dev/null
+++ b/arch/sparc/include/asm/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/sparc/include/asm/dma-mapping.h b/arch/sparc/include/asm/dma-mapping.h
new file mode 100644
index 0000000..0f4150e
--- /dev/null
+++ b/arch/sparc/include/asm/dma-mapping.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_DMA_MAPPING_H
+#define ___ASM_SPARC_DMA_MAPPING_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/dma-mapping_64.h>
+#else
+#include <asm/dma-mapping_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/dma-mapping_32.h b/arch/sparc/include/asm/dma-mapping_32.h
new file mode 100644
index 0000000..f3a641e
--- /dev/null
+++ b/arch/sparc/include/asm/dma-mapping_32.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_SPARC_DMA_MAPPING_H
+#define _ASM_SPARC_DMA_MAPPING_H
+
+
+#ifdef CONFIG_PCI
+#include <asm-generic/dma-mapping.h>
+#else
+#include <asm-generic/dma-mapping-broken.h>
+#endif /* PCI */
+
+#endif /* _ASM_SPARC_DMA_MAPPING_H */
diff --git a/arch/sparc/include/asm/dma-mapping_64.h b/arch/sparc/include/asm/dma-mapping_64.h
new file mode 100644
index 0000000..bfa64f9
--- /dev/null
+++ b/arch/sparc/include/asm/dma-mapping_64.h
@@ -0,0 +1,154 @@
+#ifndef _ASM_SPARC64_DMA_MAPPING_H
+#define _ASM_SPARC64_DMA_MAPPING_H
+
+#include <linux/scatterlist.h>
+#include <linux/mm.h>
+
+#define DMA_ERROR_CODE	(~(dma_addr_t)0x0)
+
+struct dma_ops {
+	void *(*alloc_coherent)(struct device *dev, size_t size,
+				dma_addr_t *dma_handle, gfp_t flag);
+	void (*free_coherent)(struct device *dev, size_t size,
+			      void *cpu_addr, dma_addr_t dma_handle);
+	dma_addr_t (*map_single)(struct device *dev, void *cpu_addr,
+				 size_t size,
+				 enum dma_data_direction direction);
+	void (*unmap_single)(struct device *dev, dma_addr_t dma_addr,
+			     size_t size,
+			     enum dma_data_direction direction);
+	int (*map_sg)(struct device *dev, struct scatterlist *sg, int nents,
+		      enum dma_data_direction direction);
+	void (*unmap_sg)(struct device *dev, struct scatterlist *sg,
+			 int nhwentries,
+			 enum dma_data_direction direction);
+	void (*sync_single_for_cpu)(struct device *dev,
+				    dma_addr_t dma_handle, size_t size,
+				    enum dma_data_direction direction);
+	void (*sync_sg_for_cpu)(struct device *dev, struct scatterlist *sg,
+				int nelems,
+				enum dma_data_direction direction);
+};
+extern const struct dma_ops *dma_ops;
+
+extern int dma_supported(struct device *dev, u64 mask);
+extern int dma_set_mask(struct device *dev, u64 dma_mask);
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t flag)
+{
+	return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+				     void *cpu_addr, dma_addr_t dma_handle)
+{
+	dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
+}
+
+static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
+					size_t size,
+					enum dma_data_direction direction)
+{
+	return dma_ops->map_single(dev, cpu_addr, size, direction);
+}
+
+static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+				    size_t size,
+				    enum dma_data_direction direction)
+{
+	dma_ops->unmap_single(dev, dma_addr, size, direction);
+}
+
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction direction)
+{
+	return dma_ops->map_single(dev, page_address(page) + offset,
+				   size, direction);
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+				  size_t size,
+				  enum dma_data_direction direction)
+{
+	dma_ops->unmap_single(dev, dma_address, size, direction);
+}
+
+static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
+			     int nents, enum dma_data_direction direction)
+{
+	return dma_ops->map_sg(dev, sg, nents, direction);
+}
+
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+				int nents, enum dma_data_direction direction)
+{
+	dma_ops->unmap_sg(dev, sg, nents, direction);
+}
+
+static inline void dma_sync_single_for_cpu(struct device *dev,
+					   dma_addr_t dma_handle, size_t size,
+					   enum dma_data_direction direction)
+{
+	dma_ops->sync_single_for_cpu(dev, dma_handle, size, direction);
+}
+
+static inline void dma_sync_single_for_device(struct device *dev,
+					      dma_addr_t dma_handle,
+					      size_t size,
+					      enum dma_data_direction direction)
+{
+	/* No flushing needed to sync cpu writes to the device.  */
+}
+
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+						 dma_addr_t dma_handle,
+						 unsigned long offset,
+						 size_t size,
+						 enum dma_data_direction direction)
+{
+	dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
+}
+
+static inline void dma_sync_single_range_for_device(struct device *dev,
+						    dma_addr_t dma_handle,
+						    unsigned long offset,
+						    size_t size,
+						    enum dma_data_direction direction)
+{
+	/* No flushing needed to sync cpu writes to the device.  */
+}
+
+
+static inline void dma_sync_sg_for_cpu(struct device *dev,
+				       struct scatterlist *sg, int nelems,
+				       enum dma_data_direction direction)
+{
+	dma_ops->sync_sg_for_cpu(dev, sg, nelems, direction);
+}
+
+static inline void dma_sync_sg_for_device(struct device *dev,
+					  struct scatterlist *sg, int nelems,
+					  enum dma_data_direction direction)
+{
+	/* No flushing needed to sync cpu writes to the device.  */
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return (dma_addr == DMA_ERROR_CODE);
+}
+
+static inline int dma_get_cache_alignment(void)
+{
+	/* no easy way to get cache size on all processors, so return
+	 * the maximum possible, to be safe */
+	return (1 << INTERNODE_CACHE_SHIFT);
+}
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#define dma_is_consistent(d, h)	(1)
+
+#endif /* _ASM_SPARC64_DMA_MAPPING_H */
diff --git a/arch/sparc/include/asm/dma.h b/arch/sparc/include/asm/dma.h
new file mode 100644
index 0000000..aa1d90a
--- /dev/null
+++ b/arch/sparc/include/asm/dma.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_DMA_H
+#define ___ASM_SPARC_DMA_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/dma_64.h>
+#else
+#include <asm/dma_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/dma_32.h b/arch/sparc/include/asm/dma_32.h
new file mode 100644
index 0000000..cf7189c
--- /dev/null
+++ b/arch/sparc/include/asm/dma_32.h
@@ -0,0 +1,288 @@
+/* include/asm/dma.h
+ *
+ * Copyright 1995 (C) David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _ASM_SPARC_DMA_H
+#define _ASM_SPARC_DMA_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include <asm/vac-ops.h>  /* for invalidate's, etc. */
+#include <asm/sbus.h>
+#include <asm/delay.h>
+#include <asm/oplib.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <linux/spinlock.h>
+
+struct page;
+extern spinlock_t  dma_spin_lock;
+
+static inline unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* These are irrelevant for Sparc DMA, but we leave it in so that
+ * things can compile.
+ */
+#define MAX_DMA_CHANNELS 8
+#define MAX_DMA_ADDRESS  (~0UL)
+#define DMA_MODE_READ    1
+#define DMA_MODE_WRITE   2
+
+/* Useful constants */
+#define SIZE_16MB      (16*1024*1024)
+#define SIZE_64K       (64*1024)
+
+/* SBUS DMA controller reg offsets */
+#define DMA_CSR		0x00UL		/* rw  DMA control/status register    0x00   */
+#define DMA_ADDR	0x04UL		/* rw  DMA transfer address register  0x04   */
+#define DMA_COUNT	0x08UL		/* rw  DMA transfer count register    0x08   */
+#define DMA_TEST	0x0cUL		/* rw  DMA test/debug register        0x0c   */
+
+/* DVMA chip revisions */
+enum dvma_rev {
+	dvmarev0,
+	dvmaesc1,
+	dvmarev1,
+	dvmarev2,
+	dvmarev3,
+	dvmarevplus,
+	dvmahme
+};
+
+#define DMA_HASCOUNT(rev)  ((rev)==dvmaesc1)
+
+/* Linux DMA information structure, filled during probe. */
+struct sbus_dma {
+	struct sbus_dma *next;
+	struct sbus_dev *sdev;
+	void __iomem *regs;
+
+	/* Status, misc info */
+	int node;                /* Prom node for this DMA device */
+	int running;             /* Are we doing DMA now? */
+	int allocated;           /* Are we "owned" by anyone yet? */
+
+	/* Transfer information. */
+	unsigned long addr;      /* Start address of current transfer */
+	int nbytes;              /* Size of current transfer */
+	int realbytes;           /* For splitting up large transfers, etc. */
+
+	/* DMA revision */
+	enum dvma_rev revision;
+};
+
+extern struct sbus_dma *dma_chain;
+
+/* Broken hardware... */
+#ifdef CONFIG_SUN4
+/* Have to sort this out. Does rev0 work fine on sun4[cmd] without isbroken?
+ * Or is rev0 present only on sun4 boxes? -jj */
+#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev0 || (dma)->revision == dvmarev1)
+#else
+#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev1)
+#endif
+#define DMA_ISESC1(dma)      ((dma)->revision == dvmaesc1)
+
+/* Main routines in dma.c */
+extern void dvma_init(struct sbus_bus *);
+
+/* Fields in the cond_reg register */
+/* First, the version identification bits */
+#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
+#define DMA_VERS0        0x00000000        /* Sunray DMA version */
+#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
+#define DMA_VERS1        0x80000000        /* DMA rev 1 */
+#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
+#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
+#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
+
+#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
+#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
+#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
+#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
+#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
+#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
+#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
+#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
+#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
+#define DMA_RST_BPP      DMA_RST_SCSI      /* Reset the BPP controller */
+#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
+#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
+#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
+#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
+#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
+#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
+#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
+#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
+#define DMA_SCSI_SBUS64  0x00008000        /* HME: Enable 64-bit SBUS mode. */
+#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
+#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
+#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
+#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
+#define DMA_E_BURSTS	 0x000c0000	   /* ENET: SBUS r/w burst mask */
+#define DMA_E_BURST32	 0x00040000	   /* ENET: SBUS 32 byte r/w burst */
+#define DMA_E_BURST16	 0x00000000	   /* ENET: SBUS 16 byte r/w burst */
+#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
+#define DMA_BRST64       0x00080000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
+#define DMA_BRST32       0x00040000        /* SCSI/BPP: 32byte bursts */
+#define DMA_BRST16       0x00000000        /* SCSI/BPP: 16byte bursts */
+#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
+#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
+#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
+#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
+#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
+#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
+#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
+#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
+#define DMA_BPP_ON       DMA_SCSI_ON       /* Enable BPP dma */
+#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
+#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
+#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
+#define DMA_RESET_FAS366 0x08000000        /* HME: Assert RESET to FAS366 */
+
+/* Values describing the burst-size property from the PROM */
+#define DMA_BURST1       0x01
+#define DMA_BURST2       0x02
+#define DMA_BURST4       0x04
+#define DMA_BURST8       0x08
+#define DMA_BURST16      0x10
+#define DMA_BURST32      0x20
+#define DMA_BURST64      0x40
+#define DMA_BURSTBITS    0x7f
+
+/* Determine highest possible final transfer address given a base */
+#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
+
+/* Yes, I hack a lot of elisp in my spare time... */
+#define DMA_ERROR_P(regs)  ((((regs)->cond_reg) & DMA_HNDL_ERROR))
+#define DMA_IRQ_P(regs)    ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)))
+#define DMA_WRITE_P(regs)  ((((regs)->cond_reg) & DMA_ST_WRITE))
+#define DMA_OFF(regs)      ((((regs)->cond_reg) &= (~DMA_ENABLE)))
+#define DMA_INTSOFF(regs)  ((((regs)->cond_reg) &= (~DMA_INT_ENAB)))
+#define DMA_INTSON(regs)   ((((regs)->cond_reg) |= (DMA_INT_ENAB)))
+#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV))
+#define DMA_SETSTART(regs, addr)  ((((regs)->st_addr) = (char *) addr))
+#define DMA_BEGINDMA_W(regs) \
+        ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB))))
+#define DMA_BEGINDMA_R(regs) \
+        ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE)))))
+
+/* For certain DMA chips, we need to disable ints upon irq entry
+ * and turn them back on when we are done.  So in any ESP interrupt
+ * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
+ * when leaving the handler.  You have been warned...
+ */
+#define DMA_IRQ_ENTRY(dma, dregs) do { \
+        if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
+   } while (0)
+
+#define DMA_IRQ_EXIT(dma, dregs) do { \
+	if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
+   } while(0)
+
+#if 0	/* P3 this stuff is inline in ledma.c:init_restart_ledma() */
+/* Pause until counter runs out or BIT isn't set in the DMA condition
+ * register.
+ */
+static inline void sparc_dma_pause(struct sparc_dma_registers *regs,
+				       unsigned long bit)
+{
+	int ctr = 50000;   /* Let's find some bugs ;) */
+
+	/* Busy wait until the bit is not set any more */
+	while((regs->cond_reg&bit) && (ctr>0)) {
+		ctr--;
+		__delay(5);
+	}
+
+	/* Check for bogus outcome. */
+	if(!ctr)
+		panic("DMA timeout");
+}
+
+/* Reset the friggin' thing... */
+#define DMA_RESET(dma) do { \
+	struct sparc_dma_registers *regs = dma->regs;                      \
+	/* Let the current FIFO drain itself */                            \
+	sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN));                         \
+	/* Reset the logic */                                              \
+	regs->cond_reg |= (DMA_RST_SCSI);     /* assert */                 \
+	__delay(400);                         /* let the bits set ;) */    \
+	regs->cond_reg &= ~(DMA_RST_SCSI);    /* de-assert */              \
+	sparc_dma_enable_interrupts(regs);    /* Re-enable interrupts */   \
+	/* Enable FAST transfers if available */                           \
+	if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS;            \
+	dma->running = 0;                                                  \
+} while(0)
+#endif
+
+#define for_each_dvma(dma) \
+        for((dma) = dma_chain; (dma); (dma) = (dma)->next)
+
+extern int get_dma_list(char *);
+extern int request_dma(unsigned int, __const__ char *);
+extern void free_dma(unsigned int);
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy	(0)
+#endif
+
+/* Routines for data transfer buffers. */
+BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long)
+BTFIXUPDEF_CALL(void,   mmu_unlockarea, char *, unsigned long)
+
+#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len)
+#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len)
+
+/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */
+BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, char *, unsigned long, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void,  mmu_get_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void,  mmu_release_scsi_one, __u32, unsigned long, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void,  mmu_release_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
+
+#define mmu_get_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_get_scsi_one)(vaddr,len,sbus)
+#define mmu_get_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_get_scsi_sgl)(sg,sz,sbus)
+#define mmu_release_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_release_scsi_one)(vaddr,len,sbus)
+#define mmu_release_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_release_scsi_sgl)(sg,sz,sbus)
+
+/*
+ * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep.
+ *
+ * The mmu_map_dma_area establishes two mappings in one go.
+ * These mappings point to pages normally mapped at 'va' (linear address).
+ * First mapping is for CPU visible address at 'a', uncached.
+ * This is an alias, but it works because it is an uncached mapping.
+ * Second mapping is for device visible address, or "bus" address.
+ * The bus address is returned at '*pba'.
+ *
+ * These functions seem distinct, but are hard to split. On sun4c,
+ * at least for now, 'a' is equal to bus address, and retured in *pba.
+ * On sun4m, page attributes depend on the CPU type, so we have to
+ * know if we are mapping RAM or I/O, so it has to be an additional argument
+ * to a separate mapping function for CPU visible mappings.
+ */
+BTFIXUPDEF_CALL(int,  mmu_map_dma_area, dma_addr_t *, unsigned long, unsigned long, int len)
+BTFIXUPDEF_CALL(struct page *, mmu_translate_dvma, unsigned long busa)
+BTFIXUPDEF_CALL(void,  mmu_unmap_dma_area, unsigned long busa, int len)
+
+#define mmu_map_dma_area(pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(pba,va,a,len)
+#define mmu_unmap_dma_area(ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(ba,len)
+#define mmu_translate_dvma(ba)     BTFIXUP_CALL(mmu_translate_dvma)(ba)
+
+#endif /* !(_ASM_SPARC_DMA_H) */
diff --git a/arch/sparc/include/asm/dma_64.h b/arch/sparc/include/asm/dma_64.h
new file mode 100644
index 0000000..46a8aec
--- /dev/null
+++ b/arch/sparc/include/asm/dma_64.h
@@ -0,0 +1,205 @@
+/*
+ * include/asm/dma.h
+ *
+ * Copyright 1996 (C) David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _ASM_SPARC64_DMA_H
+#define _ASM_SPARC64_DMA_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+
+#include <asm/sbus.h>
+#include <asm/delay.h>
+#include <asm/oplib.h>
+
+/* These are irrelevant for Sparc DMA, but we leave it in so that
+ * things can compile.
+ */
+#define MAX_DMA_CHANNELS 8
+#define DMA_MODE_READ    1
+#define DMA_MODE_WRITE   2
+#define MAX_DMA_ADDRESS  (~0UL)
+
+/* Useful constants */
+#define SIZE_16MB      (16*1024*1024)
+#define SIZE_64K       (64*1024)
+
+/* SBUS DMA controller reg offsets */
+#define DMA_CSR		0x00UL		/* rw  DMA control/status register    0x00   */
+#define DMA_ADDR	0x04UL		/* rw  DMA transfer address register  0x04   */
+#define DMA_COUNT	0x08UL		/* rw  DMA transfer count register    0x08   */
+#define DMA_TEST	0x0cUL		/* rw  DMA test/debug register        0x0c   */
+
+/* DVMA chip revisions */
+enum dvma_rev {
+	dvmarev0,
+	dvmaesc1,
+	dvmarev1,
+	dvmarev2,
+	dvmarev3,
+	dvmarevplus,
+	dvmahme
+};
+
+#define DMA_HASCOUNT(rev)  ((rev)==dvmaesc1)
+
+/* Linux DMA information structure, filled during probe. */
+struct sbus_dma {
+	struct sbus_dma *next;
+	struct sbus_dev *sdev;
+	void __iomem *regs;
+
+	/* Status, misc info */
+	int node;                /* Prom node for this DMA device */
+	int running;             /* Are we doing DMA now? */
+	int allocated;           /* Are we "owned" by anyone yet? */
+
+	/* Transfer information. */
+	u32 addr;                /* Start address of current transfer */
+	int nbytes;              /* Size of current transfer */
+	int realbytes;           /* For splitting up large transfers, etc. */
+
+	/* DMA revision */
+	enum dvma_rev revision;
+};
+
+extern struct sbus_dma *dma_chain;
+
+/* Broken hardware... */
+#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev1)
+#define DMA_ISESC1(dma)      ((dma)->revision == dvmaesc1)
+
+/* Main routines in dma.c */
+extern void dvma_init(struct sbus_bus *);
+
+/* Fields in the cond_reg register */
+/* First, the version identification bits */
+#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
+#define DMA_VERS0        0x00000000        /* Sunray DMA version */
+#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
+#define DMA_VERS1        0x80000000        /* DMA rev 1 */
+#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
+#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
+#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
+
+#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
+#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
+#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
+#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
+#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
+#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
+#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
+#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
+#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
+#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
+#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
+#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
+#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
+#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
+#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
+#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
+#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
+#define DMA_SCSI_SBUS64  0x00008000        /* HME: Enable 64-bit SBUS mode. */
+#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
+#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
+#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
+#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
+#define DMA_E_BURSTS	 0x000c0000	   /* ENET: SBUS r/w burst mask */
+#define DMA_E_BURST32	 0x00040000	   /* ENET: SBUS 32 byte r/w burst */
+#define DMA_E_BURST16	 0x00000000	   /* ENET: SBUS 16 byte r/w burst */
+#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
+#define DMA_BRST64       0x000c0000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
+#define DMA_BRST32       0x00040000        /* SCSI: 32byte bursts */
+#define DMA_BRST16       0x00000000        /* SCSI: 16byte bursts */
+#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
+#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
+#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
+#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
+#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
+#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
+#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
+#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
+#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
+#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
+#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
+#define DMA_RESET_FAS366 0x08000000        /* HME: Assert RESET to FAS366 */
+
+/* Values describing the burst-size property from the PROM */
+#define DMA_BURST1       0x01
+#define DMA_BURST2       0x02
+#define DMA_BURST4       0x04
+#define DMA_BURST8       0x08
+#define DMA_BURST16      0x10
+#define DMA_BURST32      0x20
+#define DMA_BURST64      0x40
+#define DMA_BURSTBITS    0x7f
+
+/* Determine highest possible final transfer address given a base */
+#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
+
+/* Yes, I hack a lot of elisp in my spare time... */
+#define DMA_ERROR_P(regs)  ((sbus_readl((regs) + DMA_CSR) & DMA_HNDL_ERROR))
+#define DMA_IRQ_P(regs)    ((sbus_readl((regs) + DMA_CSR)) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))
+#define DMA_WRITE_P(regs)  ((sbus_readl((regs) + DMA_CSR) & DMA_ST_WRITE))
+#define DMA_OFF(__regs)		\
+do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+	tmp &= ~DMA_ENABLE; \
+	sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_INTSOFF(__regs)	\
+do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+	tmp &= ~DMA_INT_ENAB; \
+	sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_INTSON(__regs)	\
+do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+	tmp |= DMA_INT_ENAB; \
+	sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_PUNTFIFO(__regs)	\
+do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+	tmp |= DMA_FIFO_INV; \
+	sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_SETSTART(__regs, __addr)	\
+	sbus_writel((u32)(__addr), (__regs) + DMA_ADDR);
+#define DMA_BEGINDMA_W(__regs)	\
+do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+	tmp |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB); \
+	sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_BEGINDMA_R(__regs)	\
+do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+	tmp |= (DMA_ENABLE|DMA_INT_ENAB); \
+	tmp &= ~DMA_ST_WRITE; \
+	sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+
+/* For certain DMA chips, we need to disable ints upon irq entry
+ * and turn them back on when we are done.  So in any ESP interrupt
+ * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
+ * when leaving the handler.  You have been warned...
+ */
+#define DMA_IRQ_ENTRY(dma, dregs) do { \
+        if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
+   } while (0)
+
+#define DMA_IRQ_EXIT(dma, dregs) do { \
+	if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
+   } while(0)
+
+#define for_each_dvma(dma) \
+        for((dma) = dma_chain; (dma); (dma) = (dma)->next)
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy 	(0)
+#endif
+
+#endif /* !(_ASM_SPARC64_DMA_H) */
diff --git a/arch/sparc/include/asm/ebus.h b/arch/sparc/include/asm/ebus.h
new file mode 100644
index 0000000..83a6d16
--- /dev/null
+++ b/arch/sparc/include/asm/ebus.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_EBUS_H
+#define ___ASM_SPARC_EBUS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/ebus_64.h>
+#else
+#include <asm/ebus_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/ebus_32.h b/arch/sparc/include/asm/ebus_32.h
new file mode 100644
index 0000000..29cb7df
--- /dev/null
+++ b/arch/sparc/include/asm/ebus_32.h
@@ -0,0 +1,99 @@
+/*
+ * ebus.h: PCI to Ebus pseudo driver software state.
+ *
+ * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
+ *
+ * Adopted for sparc by V. Roganov and G. Raiko.
+ */
+
+#ifndef __SPARC_EBUS_H
+#define __SPARC_EBUS_H
+
+#ifndef _LINUX_IOPORT_H
+#include <linux/ioport.h>
+#endif
+#include <asm/oplib.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+
+struct linux_ebus_child {
+	struct linux_ebus_child		*next;
+	struct linux_ebus_device	*parent;
+	struct linux_ebus		*bus;
+	struct device_node		*prom_node;
+	struct resource			 resource[PROMREG_MAX];
+	int				 num_addrs;
+	unsigned int			 irqs[PROMINTR_MAX];
+	int				 num_irqs;
+};
+
+struct linux_ebus_device {
+	struct of_device		ofdev;
+	struct linux_ebus_device	*next;
+	struct linux_ebus_child		*children;
+	struct linux_ebus		*bus;
+	struct device_node		*prom_node;
+	struct resource			 resource[PROMREG_MAX];
+	int				 num_addrs;
+	unsigned int			 irqs[PROMINTR_MAX];
+	int				 num_irqs;
+};
+#define to_ebus_device(d) container_of(d, struct linux_ebus_device, ofdev.dev)
+
+struct linux_ebus {
+	struct of_device		ofdev;
+	struct linux_ebus		*next;
+	struct linux_ebus_device	*devices;
+	struct linux_pbm_info		*parent;
+	struct pci_dev			*self;
+	struct device_node		*prom_node;
+};
+#define to_ebus(d) container_of(d, struct linux_ebus, ofdev.dev)
+
+struct linux_ebus_dma {
+	unsigned int dcsr;
+	unsigned int dacr;
+	unsigned int dbcr;
+};
+
+#define EBUS_DCSR_INT_PEND	0x00000001
+#define EBUS_DCSR_ERR_PEND	0x00000002
+#define EBUS_DCSR_DRAIN		0x00000004
+#define EBUS_DCSR_INT_EN	0x00000010
+#define EBUS_DCSR_RESET		0x00000080
+#define EBUS_DCSR_WRITE		0x00000100
+#define EBUS_DCSR_EN_DMA	0x00000200
+#define EBUS_DCSR_CYC_PEND	0x00000400
+#define EBUS_DCSR_DIAG_RD_DONE	0x00000800
+#define EBUS_DCSR_DIAG_WR_DONE	0x00001000
+#define EBUS_DCSR_EN_CNT	0x00002000
+#define EBUS_DCSR_TC		0x00004000
+#define EBUS_DCSR_DIS_CSR_DRN	0x00010000
+#define EBUS_DCSR_BURST_SZ_MASK	0x000c0000
+#define EBUS_DCSR_BURST_SZ_1	0x00080000
+#define EBUS_DCSR_BURST_SZ_4	0x00000000
+#define EBUS_DCSR_BURST_SZ_8	0x00040000
+#define EBUS_DCSR_BURST_SZ_16	0x000c0000
+#define EBUS_DCSR_DIAG_EN	0x00100000
+#define EBUS_DCSR_DIS_ERR_PEND	0x00400000
+#define EBUS_DCSR_TCI_DIS	0x00800000
+#define EBUS_DCSR_EN_NEXT	0x01000000
+#define EBUS_DCSR_DMA_ON	0x02000000
+#define EBUS_DCSR_A_LOADED	0x04000000
+#define EBUS_DCSR_NA_LOADED	0x08000000
+#define EBUS_DCSR_DEV_ID_MASK	0xf0000000
+
+extern struct linux_ebus		*ebus_chain;
+
+extern void ebus_init(void);
+
+#define for_each_ebus(bus)						\
+        for((bus) = ebus_chain; (bus); (bus) = (bus)->next)
+
+#define for_each_ebusdev(dev, bus)					\
+        for((dev) = (bus)->devices; (dev); (dev) = (dev)->next)
+
+#define for_each_edevchild(dev, child)					\
+        for((child) = (dev)->children; (child); (child) = (child)->next)
+
+#endif /* !(__SPARC_EBUS_H) */
diff --git a/arch/sparc/include/asm/ebus_64.h b/arch/sparc/include/asm/ebus_64.h
new file mode 100644
index 0000000..fcc62b9
--- /dev/null
+++ b/arch/sparc/include/asm/ebus_64.h
@@ -0,0 +1,94 @@
+/*
+ * ebus.h: PCI to Ebus pseudo driver software state.
+ *
+ * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
+ * Copyright (C) 1999 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef __SPARC64_EBUS_H
+#define __SPARC64_EBUS_H
+
+#include <asm/oplib.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+
+struct linux_ebus_child {
+	struct linux_ebus_child		*next;
+	struct linux_ebus_device	*parent;
+	struct linux_ebus		*bus;
+	struct device_node		*prom_node;
+	struct resource			 resource[PROMREG_MAX];
+	int				 num_addrs;
+	unsigned int			 irqs[PROMINTR_MAX];
+	int				 num_irqs;
+};
+
+struct linux_ebus_device {
+	struct of_device		ofdev;
+	struct linux_ebus_device	*next;
+	struct linux_ebus_child		*children;
+	struct linux_ebus		*bus;
+	struct device_node		*prom_node;
+	struct resource			 resource[PROMREG_MAX];
+	int				 num_addrs;
+	unsigned int			 irqs[PROMINTR_MAX];
+	int				 num_irqs;
+};
+#define to_ebus_device(d) container_of(d, struct linux_ebus_device, ofdev.dev)
+
+struct linux_ebus {
+	struct of_device		ofdev;
+	struct linux_ebus		*next;
+	struct linux_ebus_device	*devices;
+	struct pci_dev			*self;
+	int				 index;
+	int				 is_rio;
+	struct device_node		*prom_node;
+};
+#define to_ebus(d) container_of(d, struct linux_ebus, ofdev.dev)
+
+struct ebus_dma_info {
+	spinlock_t	lock;
+	void __iomem	*regs;
+
+	unsigned int	flags;
+#define EBUS_DMA_FLAG_USE_EBDMA_HANDLER		0x00000001
+#define EBUS_DMA_FLAG_TCI_DISABLE		0x00000002
+
+	/* These are only valid is EBUS_DMA_FLAG_USE_EBDMA_HANDLER is
+	 * set.
+	 */
+	void (*callback)(struct ebus_dma_info *p, int event, void *cookie);
+	void *client_cookie;
+	unsigned int	irq;
+#define EBUS_DMA_EVENT_ERROR	1
+#define EBUS_DMA_EVENT_DMA	2
+#define EBUS_DMA_EVENT_DEVICE	4
+
+	unsigned char	name[64];
+};
+
+extern int ebus_dma_register(struct ebus_dma_info *p);
+extern int ebus_dma_irq_enable(struct ebus_dma_info *p, int on);
+extern void ebus_dma_unregister(struct ebus_dma_info *p);
+extern int ebus_dma_request(struct ebus_dma_info *p, dma_addr_t bus_addr,
+			    size_t len);
+extern void ebus_dma_prepare(struct ebus_dma_info *p, int write);
+extern unsigned int ebus_dma_residue(struct ebus_dma_info *p);
+extern unsigned int ebus_dma_addr(struct ebus_dma_info *p);
+extern void ebus_dma_enable(struct ebus_dma_info *p, int on);
+
+extern struct linux_ebus		*ebus_chain;
+
+extern void ebus_init(void);
+
+#define for_each_ebus(bus)						\
+        for((bus) = ebus_chain; (bus); (bus) = (bus)->next)
+
+#define for_each_ebusdev(dev, bus)					\
+        for((dev) = (bus)->devices; (dev); (dev) = (dev)->next)
+
+#define for_each_edevchild(dev, child)					\
+        for((child) = (dev)->children; (child); (child) = (child)->next)
+
+#endif /* !(__SPARC64_EBUS_H) */
diff --git a/arch/sparc/include/asm/ecc.h b/arch/sparc/include/asm/ecc.h
new file mode 100644
index 0000000..ccb84b6
--- /dev/null
+++ b/arch/sparc/include/asm/ecc.h
@@ -0,0 +1,122 @@
+/*
+ * ecc.h: Definitions and defines for the external cache/memory
+ *        controller on the sun4m.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_ECC_H
+#define _SPARC_ECC_H
+
+/* These registers are accessed through the SRMMU passthrough ASI 0x20 */
+#define ECC_ENABLE     0x00000000       /* ECC enable register */
+#define ECC_FSTATUS    0x00000008       /* ECC fault status register */
+#define ECC_FADDR      0x00000010       /* ECC fault address register */
+#define ECC_DIGNOSTIC  0x00000018       /* ECC diagnostics register */
+#define ECC_MBAENAB    0x00000020       /* MBus arbiter enable register */
+#define ECC_DMESG      0x00001000       /* Diagnostic message passing area */
+
+/* ECC MBus Arbiter Enable register:
+ *
+ * ----------------------------------------
+ * |              |SBUS|MOD3|MOD2|MOD1|RSV|
+ * ----------------------------------------
+ *  31           5   4   3    2    1    0
+ *
+ * SBUS: Enable MBus Arbiter on the SBus 0=off 1=on
+ * MOD3: Enable MBus Arbiter on MBus module 3  0=off 1=on
+ * MOD2: Enable MBus Arbiter on MBus module 2  0=off 1=on
+ * MOD1: Enable MBus Arbiter on MBus module 1  0=off 1=on
+ */
+
+#define ECC_MBAE_SBUS     0x00000010
+#define ECC_MBAE_MOD3     0x00000008
+#define ECC_MBAE_MOD2     0x00000004
+#define ECC_MBAE_MOD1     0x00000002 
+
+/* ECC Fault Control Register layout:
+ *
+ * -----------------------------
+ * |    RESV   | ECHECK | EINT |
+ * -----------------------------
+ *  31        2     1       0
+ *
+ * ECHECK:  Enable ECC checking.  0=off 1=on
+ * EINT:  Enable Interrupts for correctable errors. 0=off 1=on
+ */ 
+#define ECC_FCR_CHECK    0x00000002
+#define ECC_FCR_INTENAB  0x00000001
+
+/* ECC Fault Address Register Zero layout:
+ *
+ * -----------------------------------------------------
+ * | MID | S | RSV |  VA   | BM |AT| C| SZ |TYP| PADDR |
+ * -----------------------------------------------------
+ *  31-28  27 26-22  21-14   13  12 11 10-8 7-4   3-0
+ *
+ * MID: ModuleID of the faulting processor. ie. who did it?
+ * S: Supervisor/Privileged access? 0=no 1=yes
+ * VA: Bits 19-12 of the virtual faulting address, these are the
+ *     superset bits in the virtual cache and can be used for
+ *     a flush operation if necessary.
+ * BM: Boot mode? 0=no 1=yes  This is just like the SRMMU boot
+ *     mode bit.
+ * AT: Did this fault happen during an atomic instruction? 0=no
+ *     1=yes.  This means either an 'ldstub' or 'swap' instruction
+ *     was in progress (but not finished) when this fault happened.
+ *     This indicated whether the bus was locked when the fault
+ *     occurred.
+ * C: Did the pte for this access indicate that it was cacheable?
+ *    0=no 1=yes
+ * SZ: The size of the transaction.
+ * TYP: The transaction type.
+ * PADDR: Bits 35-32 of the physical address for the fault.
+ */
+#define ECC_FADDR0_MIDMASK   0xf0000000
+#define ECC_FADDR0_S         0x08000000
+#define ECC_FADDR0_VADDR     0x003fc000
+#define ECC_FADDR0_BMODE     0x00002000
+#define ECC_FADDR0_ATOMIC    0x00001000
+#define ECC_FADDR0_CACHE     0x00000800
+#define ECC_FADDR0_SIZE      0x00000700
+#define ECC_FADDR0_TYPE      0x000000f0
+#define ECC_FADDR0_PADDR     0x0000000f
+
+/* ECC Fault Address Register One layout:
+ *
+ * -------------------------------------
+ * |          Physical Address 31-0    |
+ * -------------------------------------
+ *  31                               0
+ *
+ * You get the upper 4 bits of the physical address from the
+ * PADDR field in ECC Fault Address Zero register.
+ */
+
+/* ECC Fault Status Register layout:
+ *
+ * ----------------------------------------------
+ * | RESV|C2E|MULT|SYNDROME|DWORD|UNC|TIMEO|BS|C|
+ * ----------------------------------------------
+ *  31-18  17  16    15-8    7-4   3    2    1 0
+ *
+ * C2E: A C2 graphics error occurred. 0=no 1=yes (SS10 only)
+ * MULT: Multiple errors occurred ;-O 0=no 1=prom_panic(yes)
+ * SYNDROME: Controller is mentally unstable.
+ * DWORD:
+ * UNC: Uncorrectable error.  0=no 1=yes
+ * TIMEO: Timeout occurred. 0=no 1=yes
+ * BS: C2 graphics bad slot access. 0=no 1=yes (SS10 only)
+ * C: Correctable error? 0=no 1=yes
+ */
+
+#define ECC_FSR_C2ERR    0x00020000
+#define ECC_FSR_MULT     0x00010000
+#define ECC_FSR_SYND     0x0000ff00
+#define ECC_FSR_DWORD    0x000000f0
+#define ECC_FSR_UNC      0x00000008
+#define ECC_FSR_TIMEO    0x00000004
+#define ECC_FSR_BADSLOT  0x00000002
+#define ECC_FSR_C        0x00000001
+
+#endif /* !(_SPARC_ECC_H) */
diff --git a/arch/sparc/include/asm/eeprom.h b/arch/sparc/include/asm/eeprom.h
new file mode 100644
index 0000000..e17beec
--- /dev/null
+++ b/arch/sparc/include/asm/eeprom.h
@@ -0,0 +1,9 @@
+/*
+ * eeprom.h:  Definitions for the Sun eeprom.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* The EEPROM and the Mostek Mk48t02 use the same IO address space
+ * for their registers/data areas.  The IDPROM lives here too.
+ */
diff --git a/arch/sparc/include/asm/elf.h b/arch/sparc/include/asm/elf.h
new file mode 100644
index 0000000..0a2816c
--- /dev/null
+++ b/arch/sparc/include/asm/elf.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_ELF_H
+#define ___ASM_SPARC_ELF_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/elf_64.h>
+#else
+#include <asm/elf_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/elf_32.h b/arch/sparc/include/asm/elf_32.h
new file mode 100644
index 0000000..d043f80
--- /dev/null
+++ b/arch/sparc/include/asm/elf_32.h
@@ -0,0 +1,145 @@
+#ifndef __ASMSPARC_ELF_H
+#define __ASMSPARC_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+
+/*
+ * Sparc section types
+ */
+#define STT_REGISTER		13
+
+/*
+ * Sparc ELF relocation types
+ */
+#define	R_SPARC_NONE		0
+#define	R_SPARC_8		1
+#define	R_SPARC_16		2
+#define	R_SPARC_32		3
+#define	R_SPARC_DISP8		4
+#define	R_SPARC_DISP16		5
+#define	R_SPARC_DISP32		6
+#define	R_SPARC_WDISP30		7
+#define	R_SPARC_WDISP22		8
+#define	R_SPARC_HI22		9
+#define	R_SPARC_22		10
+#define	R_SPARC_13		11
+#define	R_SPARC_LO10		12
+#define	R_SPARC_GOT10		13
+#define	R_SPARC_GOT13		14
+#define	R_SPARC_GOT22		15
+#define	R_SPARC_PC10		16
+#define	R_SPARC_PC22		17
+#define	R_SPARC_WPLT30		18
+#define	R_SPARC_COPY		19
+#define	R_SPARC_GLOB_DAT	20
+#define	R_SPARC_JMP_SLOT	21
+#define	R_SPARC_RELATIVE	22
+#define	R_SPARC_UA32		23
+#define R_SPARC_PLT32		24
+#define R_SPARC_HIPLT22		25
+#define R_SPARC_LOPLT10		26
+#define R_SPARC_PCPLT32		27
+#define R_SPARC_PCPLT22		28
+#define R_SPARC_PCPLT10		29
+#define R_SPARC_10		30
+#define R_SPARC_11		31
+#define R_SPARC_64		32
+#define R_SPARC_OLO10		33
+#define R_SPARC_WDISP16		40
+#define R_SPARC_WDISP19		41
+#define R_SPARC_7		43
+#define R_SPARC_5		44
+#define R_SPARC_6		45
+
+/* Bits present in AT_HWCAP, primarily for Sparc32.  */
+
+#define HWCAP_SPARC_FLUSH       1    /* CPU supports flush instruction. */
+#define HWCAP_SPARC_STBAR       2
+#define HWCAP_SPARC_SWAP        4
+#define HWCAP_SPARC_MULDIV      8
+#define HWCAP_SPARC_V9		16
+#define HWCAP_SPARC_ULTRA3	32
+
+#define CORE_DUMP_USE_REGSET
+
+/* Format is:
+ * 	G0 --> G7
+ *	O0 --> O7
+ *	L0 --> L7
+ *	I0 --> I7
+ *	PSR, PC, nPC, Y, WIM, TBR
+ */
+typedef unsigned long elf_greg_t;
+#define ELF_NGREG 38
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct {
+	union {
+		unsigned long	pr_regs[32];
+		double		pr_dregs[16];
+	} pr_fr;
+	unsigned long __unused;
+	unsigned long	pr_fsr;
+	unsigned char	pr_qcnt;
+	unsigned char	pr_q_entrysize;
+	unsigned char	pr_en;
+	unsigned int	pr_q[64];
+} elf_fpregset_t;
+
+#include <asm/mbus.h>
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_SPARC)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_ARCH	EM_SPARC
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2MSB
+
+#define USE_ELF_CORE_DUMP
+#ifndef CONFIG_SUN4
+#define ELF_EXEC_PAGESIZE	4096
+#else
+#define ELF_EXEC_PAGESIZE	8192
+#endif
+
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (TASK_UNMAPPED_BASE)
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  This can NOT be done in userspace
+   on Sparc.  */
+
+/* Sun4c has none of the capabilities, most sun4m's have them all.
+ * XXX This is gross, set some global variable at boot time. -DaveM
+ */
+#define ELF_HWCAP	((ARCH_SUN4C_SUN4) ? 0 : \
+			 (HWCAP_SPARC_FLUSH | HWCAP_SPARC_STBAR | \
+			  HWCAP_SPARC_SWAP | \
+			  ((srmmu_modtype != Cypress && \
+			    srmmu_modtype != Cypress_vE && \
+			    srmmu_modtype != Cypress_vD) ? \
+			   HWCAP_SPARC_MULDIV : 0)))
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo. */
+
+#define ELF_PLATFORM	(NULL)
+
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+
+#endif /* !(__ASMSPARC_ELF_H) */
diff --git a/arch/sparc/include/asm/elf_64.h b/arch/sparc/include/asm/elf_64.h
new file mode 100644
index 0000000..0818a13
--- /dev/null
+++ b/arch/sparc/include/asm/elf_64.h
@@ -0,0 +1,217 @@
+#ifndef __ASM_SPARC64_ELF_H
+#define __ASM_SPARC64_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/processor.h>
+#include <asm/uaccess.h>
+#include <asm/spitfire.h>
+
+/*
+ * Sparc section types
+ */
+#define STT_REGISTER		13
+
+/*
+ * Sparc ELF relocation types
+ */
+#define	R_SPARC_NONE		0
+#define	R_SPARC_8		1
+#define	R_SPARC_16		2
+#define	R_SPARC_32		3
+#define	R_SPARC_DISP8		4
+#define	R_SPARC_DISP16		5
+#define	R_SPARC_DISP32		6
+#define	R_SPARC_WDISP30		7
+#define	R_SPARC_WDISP22		8
+#define	R_SPARC_HI22		9
+#define	R_SPARC_22		10
+#define	R_SPARC_13		11
+#define	R_SPARC_LO10		12
+#define	R_SPARC_GOT10		13
+#define	R_SPARC_GOT13		14
+#define	R_SPARC_GOT22		15
+#define	R_SPARC_PC10		16
+#define	R_SPARC_PC22		17
+#define	R_SPARC_WPLT30		18
+#define	R_SPARC_COPY		19
+#define	R_SPARC_GLOB_DAT	20
+#define	R_SPARC_JMP_SLOT	21
+#define	R_SPARC_RELATIVE	22
+#define	R_SPARC_UA32		23
+#define R_SPARC_PLT32		24
+#define R_SPARC_HIPLT22		25
+#define R_SPARC_LOPLT10		26
+#define R_SPARC_PCPLT32		27
+#define R_SPARC_PCPLT22		28
+#define R_SPARC_PCPLT10		29
+#define R_SPARC_10		30
+#define R_SPARC_11		31
+#define R_SPARC_64		32
+#define R_SPARC_OLO10		33
+#define R_SPARC_WDISP16		40
+#define R_SPARC_WDISP19		41
+#define R_SPARC_7		43
+#define R_SPARC_5		44
+#define R_SPARC_6		45
+
+/* Bits present in AT_HWCAP, primarily for Sparc32.  */
+
+#define HWCAP_SPARC_FLUSH       1    /* CPU supports flush instruction. */
+#define HWCAP_SPARC_STBAR       2
+#define HWCAP_SPARC_SWAP        4
+#define HWCAP_SPARC_MULDIV      8
+#define HWCAP_SPARC_V9		16
+#define HWCAP_SPARC_ULTRA3	32
+#define HWCAP_SPARC_BLKINIT	64
+#define HWCAP_SPARC_N2		128
+
+#define CORE_DUMP_USE_REGSET
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_ARCH		EM_SPARCV9
+#define ELF_CLASS		ELFCLASS64
+#define ELF_DATA		ELFDATA2MSB
+
+/* Format of 64-bit elf_gregset_t is:
+ * 	G0 --> G7
+ * 	O0 --> O7
+ * 	L0 --> L7
+ * 	I0 --> I7
+ *	TSTATE
+ *	TPC
+ *	TNPC
+ *	Y
+ */
+typedef unsigned long elf_greg_t;
+#define ELF_NGREG 36
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct {
+	unsigned long	pr_regs[32];
+	unsigned long	pr_fsr;
+	unsigned long	pr_gsr;
+	unsigned long	pr_fprs;
+} elf_fpregset_t;
+
+/* Format of 32-bit elf_gregset_t is:
+ * 	G0 --> G7
+ *	O0 --> O7
+ *	L0 --> L7
+ *	I0 --> I7
+ *	PSR, PC, nPC, Y, WIM, TBR
+ */
+typedef unsigned int compat_elf_greg_t;
+#define COMPAT_ELF_NGREG 38
+typedef compat_elf_greg_t compat_elf_gregset_t[COMPAT_ELF_NGREG];
+
+typedef struct {
+	union {
+		unsigned int	pr_regs[32];
+		unsigned long	pr_dregs[16];
+	} pr_fr;
+	unsigned int __unused;
+	unsigned int	pr_fsr;
+	unsigned char	pr_qcnt;
+	unsigned char	pr_q_entrysize;
+	unsigned char	pr_en;
+	unsigned int	pr_q[64];
+} compat_elf_fpregset_t;
+
+/* UltraSparc extensions.  Still unused, but will be eventually.  */
+typedef struct {
+	unsigned int pr_type;
+	unsigned int pr_align;
+	union {
+		struct {
+			union {
+				unsigned int	pr_regs[32];
+				unsigned long	pr_dregs[16];
+				long double	pr_qregs[8];
+			} pr_xfr;
+		} pr_v8p;
+		unsigned int	pr_xfsr;
+		unsigned int	pr_fprs;
+		unsigned int	pr_xg[8];
+		unsigned int	pr_xo[8];
+		unsigned long	pr_tstate;
+		unsigned int	pr_filler[8];
+	} pr_un;
+} elf_xregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x)		((x)->e_machine == ELF_ARCH)
+#define compat_elf_check_arch(x)	((x)->e_machine == EM_SPARC || \
+					 (x)->e_machine == EM_SPARC32PLUS)
+#define compat_start_thread		start_thread32
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE		0x0000010000000000UL
+#define COMPAT_ELF_ET_DYN_BASE	0x0000000070000000UL
+
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  */
+
+/* On Ultra, we support all of the v8 capabilities. */
+static inline unsigned int sparc64_elf_hwcap(void)
+{
+	unsigned int cap = (HWCAP_SPARC_FLUSH | HWCAP_SPARC_STBAR |
+			    HWCAP_SPARC_SWAP | HWCAP_SPARC_MULDIV |
+			    HWCAP_SPARC_V9);
+
+	if (tlb_type == cheetah || tlb_type == cheetah_plus)
+		cap |= HWCAP_SPARC_ULTRA3;
+	else if (tlb_type == hypervisor) {
+		if (sun4v_chip_type == SUN4V_CHIP_NIAGARA1 ||
+		    sun4v_chip_type == SUN4V_CHIP_NIAGARA2)
+			cap |= HWCAP_SPARC_BLKINIT;
+		if (sun4v_chip_type == SUN4V_CHIP_NIAGARA2)
+			cap |= HWCAP_SPARC_N2;
+	}
+
+	return cap;
+}
+
+#define ELF_HWCAP	sparc64_elf_hwcap();
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM	(NULL)
+
+#define SET_PERSONALITY(ex, ibcs2)			\
+do {	unsigned long new_flags = current_thread_info()->flags; \
+	new_flags &= _TIF_32BIT;			\
+	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)	\
+		new_flags |= _TIF_32BIT;		\
+	else						\
+		new_flags &= ~_TIF_32BIT;		\
+	if ((current_thread_info()->flags & _TIF_32BIT) \
+	    != new_flags)				\
+		set_thread_flag(TIF_ABI_PENDING);	\
+	else						\
+		clear_thread_flag(TIF_ABI_PENDING);	\
+	/* flush_thread will update pgd cache */	\
+	if (ibcs2)					\
+		set_personality(PER_SVR4);		\
+	else if (current->personality != PER_LINUX32)	\
+		set_personality(PER_LINUX);		\
+} while (0)
+
+#endif /* !(__ASM_SPARC64_ELF_H) */
diff --git a/arch/sparc/include/asm/emergency-restart.h b/arch/sparc/include/asm/emergency-restart.h
new file mode 100644
index 0000000..108d8c4
--- /dev/null
+++ b/arch/sparc/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/sparc/include/asm/envctrl.h b/arch/sparc/include/asm/envctrl.h
new file mode 100644
index 0000000..624fa7e
--- /dev/null
+++ b/arch/sparc/include/asm/envctrl.h
@@ -0,0 +1,103 @@
+/*
+ *
+ * envctrl.h: Definitions for access to the i2c environment
+ *            monitoring on Ultrasparc systems.
+ *
+ * Copyright (C) 1998  Eddie C. Dost  (ecd@skynet.be)
+ * Copyright (C) 2000  Vinh Truong  (vinh.truong@eng.sun.com)
+ * VT - Add all ioctl commands and environment status definitions
+ * VT - Add application note
+ */
+#ifndef _SPARC64_ENVCTRL_H
+#define _SPARC64_ENVCTRL_H 1
+
+#include <linux/ioctl.h>
+
+/* Application note:
+ *
+ * The driver supports 4 operations: open(), close(), ioctl(), read()
+ * The device name is /dev/envctrl.
+ * Below is sample usage:
+ *
+ *	fd = open("/dev/envtrl", O_RDONLY);
+ *	if (ioctl(fd, ENVCTRL_READ_SHUTDOWN_TEMPERATURE, 0) < 0)
+ *		printf("error\n");
+ *	ret = read(fd, buf, 10);
+ *	close(fd);
+ *
+ * Notice in the case of cpu voltage and temperature, the default is
+ * cpu0.  If we need to know the info of cpu1, cpu2, cpu3, we need to
+ * pass in cpu number in ioctl() last parameter.  For example, to
+ * get the voltage of cpu2:
+ *
+ *	ioctlbuf[0] = 2;
+ *	if (ioctl(fd, ENVCTRL_READ_CPU_VOLTAGE, ioctlbuf) < 0)
+ *		printf("error\n");
+ *	ret = read(fd, buf, 10);
+ *
+ * All the return values are in ascii.  So check read return value
+ * and do appropriate conversions in your application.
+ */
+
+/* IOCTL commands */
+
+/* Note: these commands reflect possible monitor features.
+ * Some boards choose to support some of the features only.
+ */
+#define ENVCTRL_RD_CPU_TEMPERATURE	_IOR('p', 0x40, int)
+#define ENVCTRL_RD_CPU_VOLTAGE		_IOR('p', 0x41, int)
+#define ENVCTRL_RD_FAN_STATUS		_IOR('p', 0x42, int)
+#define ENVCTRL_RD_WARNING_TEMPERATURE	_IOR('p', 0x43, int)
+#define ENVCTRL_RD_SHUTDOWN_TEMPERATURE	_IOR('p', 0x44, int)
+#define ENVCTRL_RD_VOLTAGE_STATUS	_IOR('p', 0x45, int)
+#define ENVCTRL_RD_SCSI_TEMPERATURE	_IOR('p', 0x46, int)
+#define ENVCTRL_RD_ETHERNET_TEMPERATURE	_IOR('p', 0x47, int)
+#define ENVCTRL_RD_MTHRBD_TEMPERATURE	_IOR('p', 0x48, int)
+
+#define ENVCTRL_RD_GLOBALADDRESS	_IOR('p', 0x49, int)
+
+/* Read return values for a voltage status request. */
+#define ENVCTRL_VOLTAGE_POWERSUPPLY_GOOD	0x01
+#define ENVCTRL_VOLTAGE_BAD			0x02
+#define ENVCTRL_POWERSUPPLY_BAD			0x03
+#define ENVCTRL_VOLTAGE_POWERSUPPLY_BAD		0x04
+
+/* Read return values for a fan status request.
+ * A failure match means either the fan fails or
+ * the fan is not connected.  Some boards have optional
+ * connectors to connect extra fans.
+ *
+ * There are maximum 8 monitor fans.  Some are cpu fans
+ * some are system fans.  The mask below only indicates
+ * fan by order number.
+ * Below is a sample application:
+ *
+ *	if (ioctl(fd, ENVCTRL_READ_FAN_STATUS, 0) < 0) {
+ *		printf("ioctl fan failed\n");
+ *	}
+ *	if (read(fd, rslt, 1) <= 0) {
+ *		printf("error or fan not monitored\n");
+ *	} else {
+ *		if (rslt[0] == ENVCTRL_ALL_FANS_GOOD) {
+ *			printf("all fans good\n");
+ *	} else if (rslt[0] == ENVCTRL_ALL_FANS_BAD) {
+ *		printf("all fans bad\n");
+ *	} else {
+ *		if (rslt[0] & ENVCTRL_FAN0_FAILURE_MASK) {
+ *			printf("fan 0 failed or not connected\n");
+ *	}
+ *	......
+ */
+
+#define ENVCTRL_ALL_FANS_GOOD			0x00
+#define ENVCTRL_FAN0_FAILURE_MASK		0x01
+#define ENVCTRL_FAN1_FAILURE_MASK		0x02
+#define ENVCTRL_FAN2_FAILURE_MASK		0x04
+#define ENVCTRL_FAN3_FAILURE_MASK		0x08
+#define ENVCTRL_FAN4_FAILURE_MASK		0x10
+#define ENVCTRL_FAN5_FAILURE_MASK		0x20
+#define ENVCTRL_FAN6_FAILURE_MASK		0x40
+#define ENVCTRL_FAN7_FAILURE_MASK		0x80
+#define ENVCTRL_ALL_FANS_BAD 			0xFF
+
+#endif /* !(_SPARC64_ENVCTRL_H) */
diff --git a/arch/sparc/include/asm/errno.h b/arch/sparc/include/asm/errno.h
new file mode 100644
index 0000000..a9ef172
--- /dev/null
+++ b/arch/sparc/include/asm/errno.h
@@ -0,0 +1,113 @@
+#ifndef _SPARC_ERRNO_H
+#define _SPARC_ERRNO_H
+
+/* These match the SunOS error numbering scheme. */
+
+#include <asm-generic/errno-base.h>
+
+#define	EWOULDBLOCK	EAGAIN	/* Operation would block */
+#define	EINPROGRESS	36	/* Operation now in progress */
+#define	EALREADY	37	/* Operation already in progress */
+#define	ENOTSOCK	38	/* Socket operation on non-socket */
+#define	EDESTADDRREQ	39	/* Destination address required */
+#define	EMSGSIZE	40	/* Message too long */
+#define	EPROTOTYPE	41	/* Protocol wrong type for socket */
+#define	ENOPROTOOPT	42	/* Protocol not available */
+#define	EPROTONOSUPPORT	43	/* Protocol not supported */
+#define	ESOCKTNOSUPPORT	44	/* Socket type not supported */
+#define	EOPNOTSUPP	45	/* Op not supported on transport endpoint */
+#define	EPFNOSUPPORT	46	/* Protocol family not supported */
+#define	EAFNOSUPPORT	47	/* Address family not supported by protocol */
+#define	EADDRINUSE	48	/* Address already in use */
+#define	EADDRNOTAVAIL	49	/* Cannot assign requested address */
+#define	ENETDOWN	50	/* Network is down */
+#define	ENETUNREACH	51	/* Network is unreachable */
+#define	ENETRESET	52	/* Net dropped connection because of reset */
+#define	ECONNABORTED	53	/* Software caused connection abort */
+#define	ECONNRESET	54	/* Connection reset by peer */
+#define	ENOBUFS		55	/* No buffer space available */
+#define	EISCONN		56	/* Transport endpoint is already connected */
+#define	ENOTCONN	57	/* Transport endpoint is not connected */
+#define	ESHUTDOWN	58	/* No send after transport endpoint shutdown */
+#define	ETOOMANYREFS	59	/* Too many references: cannot splice */
+#define	ETIMEDOUT	60	/* Connection timed out */
+#define	ECONNREFUSED	61	/* Connection refused */
+#define	ELOOP		62	/* Too many symbolic links encountered */
+#define	ENAMETOOLONG	63	/* File name too long */
+#define	EHOSTDOWN	64	/* Host is down */
+#define	EHOSTUNREACH	65	/* No route to host */
+#define	ENOTEMPTY	66	/* Directory not empty */
+#define EPROCLIM        67      /* SUNOS: Too many processes */
+#define	EUSERS		68	/* Too many users */
+#define	EDQUOT		69	/* Quota exceeded */
+#define	ESTALE		70	/* Stale NFS file handle */
+#define	EREMOTE		71	/* Object is remote */
+#define	ENOSTR		72	/* Device not a stream */
+#define	ETIME		73	/* Timer expired */
+#define	ENOSR		74	/* Out of streams resources */
+#define	ENOMSG		75	/* No message of desired type */
+#define	EBADMSG		76	/* Not a data message */
+#define	EIDRM		77	/* Identifier removed */
+#define	EDEADLK		78	/* Resource deadlock would occur */
+#define	ENOLCK		79	/* No record locks available */
+#define	ENONET		80	/* Machine is not on the network */
+#define ERREMOTE        81      /* SunOS: Too many lvls of remote in path */
+#define	ENOLINK		82	/* Link has been severed */
+#define	EADV		83	/* Advertise error */
+#define	ESRMNT		84	/* Srmount error */
+#define	ECOMM		85      /* Communication error on send */
+#define	EPROTO		86	/* Protocol error */
+#define	EMULTIHOP	87	/* Multihop attempted */
+#define	EDOTDOT		88	/* RFS specific error */
+#define	EREMCHG		89	/* Remote address changed */
+#define	ENOSYS		90	/* Function not implemented */
+
+/* The rest have no SunOS equivalent. */
+#define	ESTRPIPE	91	/* Streams pipe error */
+#define	EOVERFLOW	92	/* Value too large for defined data type */
+#define	EBADFD		93	/* File descriptor in bad state */
+#define	ECHRNG		94	/* Channel number out of range */
+#define	EL2NSYNC	95	/* Level 2 not synchronized */
+#define	EL3HLT		96	/* Level 3 halted */
+#define	EL3RST		97	/* Level 3 reset */
+#define	ELNRNG		98	/* Link number out of range */
+#define	EUNATCH		99	/* Protocol driver not attached */
+#define	ENOCSI		100	/* No CSI structure available */
+#define	EL2HLT		101	/* Level 2 halted */
+#define	EBADE		102	/* Invalid exchange */
+#define	EBADR		103	/* Invalid request descriptor */
+#define	EXFULL		104	/* Exchange full */
+#define	ENOANO		105	/* No anode */
+#define	EBADRQC		106	/* Invalid request code */
+#define	EBADSLT		107	/* Invalid slot */
+#define	EDEADLOCK	108	/* File locking deadlock error */
+#define	EBFONT		109	/* Bad font file format */
+#define	ELIBEXEC	110	/* Cannot exec a shared library directly */
+#define	ENODATA		111	/* No data available */
+#define	ELIBBAD		112	/* Accessing a corrupted shared library */
+#define	ENOPKG		113	/* Package not installed */
+#define	ELIBACC		114	/* Can not access a needed shared library */
+#define	ENOTUNIQ	115	/* Name not unique on network */
+#define	ERESTART	116	/* Interrupted syscall should be restarted */
+#define	EUCLEAN		117	/* Structure needs cleaning */
+#define	ENOTNAM		118	/* Not a XENIX named type file */
+#define	ENAVAIL		119	/* No XENIX semaphores available */
+#define	EISNAM		120	/* Is a named type file */
+#define	EREMOTEIO	121	/* Remote I/O error */
+#define	EILSEQ		122	/* Illegal byte sequence */
+#define	ELIBMAX		123	/* Atmpt to link in too many shared libs */
+#define	ELIBSCN		124	/* .lib section in a.out corrupted */
+
+#define	ENOMEDIUM	125	/* No medium found */
+#define	EMEDIUMTYPE	126	/* Wrong medium type */
+#define	ECANCELED	127	/* Operation Cancelled */
+#define	ENOKEY		128	/* Required key not available */
+#define	EKEYEXPIRED	129	/* Key has expired */
+#define	EKEYREVOKED	130	/* Key has been revoked */
+#define	EKEYREJECTED	131	/* Key was rejected by service */
+
+/* for robust mutexes */
+#define	EOWNERDEAD	132	/* Owner died */
+#define	ENOTRECOVERABLE	133	/* State not recoverable */
+
+#endif
diff --git a/arch/sparc/include/asm/estate.h b/arch/sparc/include/asm/estate.h
new file mode 100644
index 0000000..520c085
--- /dev/null
+++ b/arch/sparc/include/asm/estate.h
@@ -0,0 +1,49 @@
+#ifndef _SPARC64_ESTATE_H
+#define _SPARC64_ESTATE_H
+
+/* UltraSPARC-III E-cache Error Enable */
+#define ESTATE_ERROR_FMT	0x0000000000040000 /* Force MTAG ECC		*/
+#define ESTATE_ERROR_FMESS	0x000000000003c000 /* Forced MTAG ECC val	*/
+#define ESTATE_ERROR_FMD	0x0000000000002000 /* Force DATA ECC		*/
+#define ESTATE_ERROR_FDECC	0x0000000000001ff0 /* Forced DATA ECC val	*/
+#define ESTATE_ERROR_UCEEN	0x0000000000000008 /* See below			*/
+#define ESTATE_ERROR_NCEEN	0x0000000000000002 /* See below			*/
+#define ESTATE_ERROR_CEEN	0x0000000000000001 /* See below			*/
+
+/* UCEEN enables the fast_ECC_error trap for: 1) software correctable E-cache
+ * errors 2) uncorrectable E-cache errors.  Such events only occur on reads
+ * of the E-cache by the local processor for: 1) data loads 2) instruction
+ * fetches 3) atomic operations.  Such events _cannot_ occur for: 1) merge
+ * 2) writeback 2) copyout.  The AFSR bits associated with these traps are
+ * UCC and UCU.
+ */
+
+/* NCEEN enables instruction_access_error, data_access_error, and ECC_error traps
+ * for uncorrectable ECC errors and system errors.
+ *
+ * Uncorrectable system bus data error or MTAG ECC error, system bus TimeOUT,
+ * or system bus BusERR:
+ * 1) As the result of an instruction fetch, will generate instruction_access_error
+ * 2) As the result of a load etc. will generate data_access_error.
+ * 3) As the result of store merge completion, writeback, or copyout will
+ *    generate a disrupting ECC_error trap.
+ * 4) As the result of such errors on instruction vector fetch can generate any
+ *    of the 3 trap types.
+ *
+ * The AFSR bits associated with these traps are EMU, EDU, WDU, CPU, IVU, UE,
+ * BERR, and TO.
+ */
+
+/* CEEN enables the ECC_error trap for hardware corrected ECC errors.  System bus
+ * reads resulting in a hardware corrected data or MTAG ECC error will generate an
+ * ECC_error disrupting trap with this bit enabled.
+ *
+ * This same trap will also be generated when a hardware corrected ECC error results
+ * during store merge, writeback, and copyout operations.
+ */
+
+/* In general, if the trap enable bits above are disabled the AFSR bits will still
+ * log the events even though the trap will not be generated by the processor.
+ */
+
+#endif /* _SPARC64_ESTATE_H */
diff --git a/arch/sparc/include/asm/fb.h b/arch/sparc/include/asm/fb.h
new file mode 100644
index 0000000..b83e447
--- /dev/null
+++ b/arch/sparc/include/asm/fb.h
@@ -0,0 +1,29 @@
+#ifndef _SPARC_FB_H_
+#define _SPARC_FB_H_
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+#include <asm/prom.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+#ifdef CONFIG_SPARC64
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+#endif
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	struct device *dev = info->device;
+	struct device_node *node;
+
+	node = dev->archdata.prom_node;
+	if (node &&
+	    node == of_console_device)
+		return 1;
+
+	return 0;
+}
+
+#endif /* _SPARC_FB_H_ */
diff --git a/arch/sparc/include/asm/fbio.h b/arch/sparc/include/asm/fbio.h
new file mode 100644
index 0000000..b9215a0
--- /dev/null
+++ b/arch/sparc/include/asm/fbio.h
@@ -0,0 +1,330 @@
+#ifndef __LINUX_FBIO_H
+#define __LINUX_FBIO_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/* Constants used for fbio SunOS compatibility */
+/* (C) 1996 Miguel de Icaza */
+
+/* Frame buffer types */
+#define FBTYPE_NOTYPE           -1
+#define FBTYPE_SUN1BW           0   /* mono */
+#define FBTYPE_SUN1COLOR        1 
+#define FBTYPE_SUN2BW           2 
+#define FBTYPE_SUN2COLOR        3 
+#define FBTYPE_SUN2GP           4 
+#define FBTYPE_SUN5COLOR        5 
+#define FBTYPE_SUN3COLOR        6 
+#define FBTYPE_MEMCOLOR         7 
+#define FBTYPE_SUN4COLOR        8 
+ 
+#define FBTYPE_NOTSUN1          9 
+#define FBTYPE_NOTSUN2          10
+#define FBTYPE_NOTSUN3          11
+ 
+#define FBTYPE_SUNFAST_COLOR    12  /* cg6 */
+#define FBTYPE_SUNROP_COLOR     13
+#define FBTYPE_SUNFB_VIDEO      14
+#define FBTYPE_SUNGIFB          15
+#define FBTYPE_SUNGPLAS         16
+#define FBTYPE_SUNGP3           17
+#define FBTYPE_SUNGT            18
+#define FBTYPE_SUNLEO           19      /* zx Leo card */
+#define FBTYPE_MDICOLOR         20      /* cg14 */
+#define FBTYPE_TCXCOLOR		21	/* SUNW,tcx card */
+
+#define FBTYPE_LASTPLUSONE      21	/* This is not last + 1 in fact... */
+
+/* Does not seem to be listed in the Sun file either */
+#define FBTYPE_CREATOR          22
+#define FBTYPE_PCI_IGA1682	23
+#define FBTYPE_P9100COLOR	24
+
+#define FBTYPE_PCI_GENERIC	1000
+#define FBTYPE_PCI_MACH64	1001
+
+/* fbio ioctls */
+/* Returned by FBIOGTYPE */
+struct  fbtype {
+        int     fb_type;        /* fb type, see above */
+        int     fb_height;      /* pixels */
+        int     fb_width;       /* pixels */
+        int     fb_depth;
+        int     fb_cmsize;      /* color map entries */
+        int     fb_size;        /* fb size in bytes */
+};
+#define FBIOGTYPE _IOR('F', 0, struct fbtype)
+
+struct  fbcmap {
+        int             index;          /* first element (0 origin) */
+        int             count;
+        unsigned char   __user *red;
+        unsigned char   __user *green;
+        unsigned char   __user *blue;
+};
+
+#ifdef __KERNEL__
+#define FBIOPUTCMAP_SPARC _IOW('F', 3, struct fbcmap)
+#define FBIOGETCMAP_SPARC _IOW('F', 4, struct fbcmap)
+#else
+#define FBIOPUTCMAP _IOW('F', 3, struct fbcmap)
+#define FBIOGETCMAP _IOW('F', 4, struct fbcmap)
+#endif
+
+/* # of device specific values */
+#define FB_ATTR_NDEVSPECIFIC    8
+/* # of possible emulations */
+#define FB_ATTR_NEMUTYPES       4
+ 
+struct fbsattr {
+        int     flags;
+        int     emu_type;	/* -1 if none */
+        int     dev_specific[FB_ATTR_NDEVSPECIFIC];
+};
+ 
+struct fbgattr {
+        int     real_type;	/* real frame buffer type */
+        int     owner;		/* unknown */
+        struct fbtype fbtype;	/* real frame buffer fbtype */
+        struct fbsattr sattr;   
+        int     emu_types[FB_ATTR_NEMUTYPES]; /* supported emulations */
+};
+#define FBIOSATTR  _IOW('F', 5, struct fbgattr) /* Unsupported: */
+#define FBIOGATTR  _IOR('F', 6, struct fbgattr)	/* supported */
+
+#define FBIOSVIDEO _IOW('F', 7, int)
+#define FBIOGVIDEO _IOR('F', 8, int)
+
+struct fbcursor {
+        short set;              /* what to set, choose from the list above */
+        short enable;           /* cursor on/off */
+        struct fbcurpos pos;    /* cursor position */
+        struct fbcurpos hot;    /* cursor hot spot */
+        struct fbcmap cmap;     /* color map info */
+        struct fbcurpos size;   /* cursor bit map size */
+        char __user *image;     /* cursor image bits */
+        char __user *mask;      /* cursor mask bits */
+};
+
+/* set/get cursor attributes/shape */
+#define FBIOSCURSOR     _IOW('F', 24, struct fbcursor)
+#define FBIOGCURSOR     _IOWR('F', 25, struct fbcursor)
+ 
+/* set/get cursor position */
+#define FBIOSCURPOS     _IOW('F', 26, struct fbcurpos)
+#define FBIOGCURPOS     _IOW('F', 27, struct fbcurpos)
+ 
+/* get max cursor size */
+#define FBIOGCURMAX     _IOR('F', 28, struct fbcurpos)
+
+/* wid manipulation */
+struct fb_wid_alloc {
+#define FB_WID_SHARED_8		0
+#define FB_WID_SHARED_24	1
+#define FB_WID_DBL_8		2
+#define FB_WID_DBL_24		3
+	__u32	wa_type;
+	__s32	wa_index;	/* Set on return */
+	__u32	wa_count;	
+};
+struct fb_wid_item {
+	__u32	wi_type;
+	__s32	wi_index;
+	__u32	wi_attrs;
+	__u32	wi_values[32];
+};
+struct fb_wid_list {
+	__u32	wl_flags;
+	__u32	wl_count;
+	struct fb_wid_item	*wl_list;
+};
+
+#define FBIO_WID_ALLOC	_IOWR('F', 30, struct fb_wid_alloc)
+#define FBIO_WID_FREE	_IOW('F', 31, struct fb_wid_alloc)
+#define FBIO_WID_PUT	_IOW('F', 32, struct fb_wid_list)
+#define FBIO_WID_GET	_IOWR('F', 33, struct fb_wid_list)
+
+/* Creator ioctls */
+#define FFB_IOCTL	('F'<<8)
+#define FFB_SYS_INFO		(FFB_IOCTL|80)
+#define FFB_CLUTREAD		(FFB_IOCTL|81)
+#define FFB_CLUTPOST		(FFB_IOCTL|82)
+#define FFB_SETDIAGMODE		(FFB_IOCTL|83)
+#define FFB_GETMONITORID	(FFB_IOCTL|84)
+#define FFB_GETVIDEOMODE	(FFB_IOCTL|85)
+#define FFB_SETVIDEOMODE	(FFB_IOCTL|86)
+#define FFB_SETSERVER		(FFB_IOCTL|87)
+#define FFB_SETOVCTL		(FFB_IOCTL|88)
+#define FFB_GETOVCTL		(FFB_IOCTL|89)
+#define FFB_GETSAXNUM		(FFB_IOCTL|90)
+#define FFB_FBDEBUG		(FFB_IOCTL|91)
+
+/* Cg14 ioctls */
+#define MDI_IOCTL          ('M'<<8)
+#define MDI_RESET          (MDI_IOCTL|1)
+#define MDI_GET_CFGINFO    (MDI_IOCTL|2)
+#define MDI_SET_PIXELMODE  (MDI_IOCTL|3)
+#    define MDI_32_PIX     32
+#    define MDI_16_PIX     16
+#    define MDI_8_PIX      8
+
+struct mdi_cfginfo {
+	int     mdi_ncluts;     /* Number of implemented CLUTs in this MDI */
+        int     mdi_type;       /* FBTYPE name */
+        int     mdi_height;     /* height */
+        int     mdi_width;      /* widht */
+        int     mdi_size;       /* available ram */
+        int     mdi_mode;       /* 8bpp, 16bpp or 32bpp */
+        int     mdi_pixfreq;    /* pixel clock (from PROM) */
+};
+
+/* SparcLinux specific ioctl for the MDI, should be replaced for
+ * the SET_XLUT/SET_CLUTn ioctls instead
+ */
+#define MDI_CLEAR_XLUT       (MDI_IOCTL|9)
+
+/* leo & ffb ioctls */
+struct fb_clut_alloc {
+	__u32	clutid;	/* Set on return */
+ 	__u32	flag;
+ 	__u32	index;
+};
+
+struct fb_clut {
+#define FB_CLUT_WAIT	0x00000001	/* Not yet implemented */
+ 	__u32	flag;
+ 	__u32	clutid;
+ 	__u32	offset;
+ 	__u32	count;
+ 	char *	red;
+ 	char *	green;
+ 	char *	blue;
+};
+
+struct fb_clut32 {
+ 	__u32	flag;
+ 	__u32	clutid;
+ 	__u32	offset;
+ 	__u32	count;
+ 	__u32	red;
+ 	__u32	green;
+ 	__u32	blue;
+};
+
+#define LEO_CLUTALLOC	_IOWR('L', 53, struct fb_clut_alloc)
+#define LEO_CLUTFREE	_IOW('L', 54, struct fb_clut_alloc)
+#define LEO_CLUTREAD	_IOW('L', 55, struct fb_clut)
+#define LEO_CLUTPOST	_IOW('L', 56, struct fb_clut)
+#define LEO_SETGAMMA	_IOW('L', 68, int) /* Not yet implemented */
+#define LEO_GETGAMMA	_IOR('L', 69, int) /* Not yet implemented */
+
+#ifdef __KERNEL__
+/* Addresses on the fd of a cgsix that are mappable */
+#define CG6_FBC    0x70000000
+#define CG6_TEC    0x70001000
+#define CG6_BTREGS 0x70002000
+#define CG6_FHC    0x70004000
+#define CG6_THC    0x70005000
+#define CG6_ROM    0x70006000
+#define CG6_RAM    0x70016000
+#define CG6_DHC    0x80000000
+
+#define CG3_MMAP_OFFSET 0x4000000
+
+/* Addresses on the fd of a tcx that are mappable */
+#define TCX_RAM8BIT   		0x00000000
+#define TCX_RAM24BIT   		0x01000000
+#define TCX_UNK3   		0x10000000
+#define TCX_UNK4   		0x20000000
+#define TCX_CONTROLPLANE   	0x28000000
+#define TCX_UNK6   		0x30000000
+#define TCX_UNK7   		0x38000000
+#define TCX_TEC    		0x70000000
+#define TCX_BTREGS 		0x70002000
+#define TCX_THC    		0x70004000
+#define TCX_DHC    		0x70008000
+#define TCX_ALT	   		0x7000a000
+#define TCX_SYNC   		0x7000e000
+#define TCX_UNK2    		0x70010000
+
+/* CG14 definitions */
+
+/* Offsets into the OBIO space: */
+#define CG14_REGS        0       /* registers */
+#define CG14_CURSORREGS  0x1000  /* cursor registers */
+#define CG14_DACREGS     0x2000  /* DAC registers */
+#define CG14_XLUT        0x3000  /* X Look Up Table -- ??? */
+#define CG14_CLUT1       0x4000  /* Color Look Up Table */
+#define CG14_CLUT2       0x5000  /* Color Look Up Table */
+#define CG14_CLUT3       0x6000  /* Color Look Up Table */
+#define CG14_AUTO	 0xf000
+
+#endif /* KERNEL */
+
+/* These are exported to userland for applications to use */
+/* Mappable offsets for the cg14: control registers */
+#define MDI_DIRECT_MAP 0x10000000
+#define MDI_CTLREG_MAP 0x20000000
+#define MDI_CURSOR_MAP 0x30000000
+#define MDI_SHDW_VRT_MAP 0x40000000
+
+/* Mappable offsets for the cg14: frame buffer resolutions */
+/* 32 bits */
+#define MDI_CHUNKY_XBGR_MAP 0x50000000
+#define MDI_CHUNKY_BGR_MAP 0x60000000
+
+/* 16 bits */
+#define MDI_PLANAR_X16_MAP 0x70000000
+#define MDI_PLANAR_C16_MAP 0x80000000
+
+/* 8 bit is done as CG3 MMAP offset */
+/* 32 bits, planar */
+#define MDI_PLANAR_X32_MAP 0x90000000
+#define MDI_PLANAR_B32_MAP 0xa0000000
+#define MDI_PLANAR_G32_MAP 0xb0000000
+#define MDI_PLANAR_R32_MAP 0xc0000000
+
+/* Mappable offsets on leo */
+#define LEO_SS0_MAP            0x00000000
+#define LEO_LC_SS0_USR_MAP     0x00800000
+#define LEO_LD_SS0_MAP         0x00801000
+#define LEO_LX_CURSOR_MAP      0x00802000
+#define LEO_SS1_MAP            0x00803000
+#define LEO_LC_SS1_USR_MAP     0x01003000
+#define LEO_LD_SS1_MAP         0x01004000
+#define LEO_UNK_MAP            0x01005000
+#define LEO_LX_KRN_MAP         0x01006000
+#define LEO_LC_SS0_KRN_MAP     0x01007000
+#define LEO_LC_SS1_KRN_MAP     0x01008000
+#define LEO_LD_GBL_MAP         0x01009000
+#define LEO_UNK2_MAP           0x0100a000
+
+#ifdef __KERNEL__
+struct  fbcmap32 {
+	int             index;          /* first element (0 origin) */
+	int             count;
+	u32		red;
+	u32		green;
+	u32		blue;
+};
+
+#define FBIOPUTCMAP32	_IOW('F', 3, struct fbcmap32)
+#define FBIOGETCMAP32	_IOW('F', 4, struct fbcmap32)
+
+struct fbcursor32 {
+	short set;		/* what to set, choose from the list above */
+	short enable;		/* cursor on/off */
+	struct fbcurpos pos;	/* cursor position */
+	struct fbcurpos hot;	/* cursor hot spot */
+	struct fbcmap32 cmap;	/* color map info */
+	struct fbcurpos size;	/* cursor bit map size */
+	u32	image;		/* cursor image bits */
+	u32	mask;		/* cursor mask bits */
+};
+
+#define FBIOSCURSOR32	_IOW('F', 24, struct fbcursor32)
+#define FBIOGCURSOR32	_IOW('F', 25, struct fbcursor32)
+#endif
+
+#endif /* __LINUX_FBIO_H */
diff --git a/arch/sparc/include/asm/fcntl.h b/arch/sparc/include/asm/fcntl.h
new file mode 100644
index 0000000..d4d9c9d
--- /dev/null
+++ b/arch/sparc/include/asm/fcntl.h
@@ -0,0 +1,40 @@
+#ifndef _SPARC_FCNTL_H
+#define _SPARC_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_APPEND	0x0008
+#define FASYNC		0x0040	/* fcntl, for BSD compatibility */
+#define O_CREAT		0x0200	/* not fcntl */
+#define O_TRUNC		0x0400	/* not fcntl */
+#define O_EXCL		0x0800	/* not fcntl */
+#define O_SYNC		0x2000
+#define O_NONBLOCK	0x4000
+#if defined(__sparc__) && defined(__arch64__)
+#define O_NDELAY	0x0004
+#else
+#define O_NDELAY	(0x0004 | O_NONBLOCK)
+#endif
+#define O_NOCTTY	0x8000	/* not fcntl */
+#define O_LARGEFILE	0x40000
+#define O_DIRECT        0x100000 /* direct disk access hint */
+#define O_NOATIME	0x200000
+#define O_CLOEXEC	0x400000
+
+#define F_GETOWN	5	/*  for sockets. */
+#define F_SETOWN	6	/*  for sockets. */
+#define F_GETLK		7
+#define F_SETLK		8
+#define F_SETLKW	9
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		1
+#define F_WRLCK		2
+#define F_UNLCK		3
+
+#define __ARCH_FLOCK_PAD	short __unused;
+#define __ARCH_FLOCK64_PAD	short __unused;
+
+#include <asm-generic/fcntl.h>
+
+#endif
diff --git a/arch/sparc/include/asm/fhc.h b/arch/sparc/include/asm/fhc.h
new file mode 100644
index 0000000..788cbc4
--- /dev/null
+++ b/arch/sparc/include/asm/fhc.h
@@ -0,0 +1,121 @@
+/*
+ * fhc.h: Structures for central/fhc pseudo driver on Sunfire/Starfire/Wildfire.
+ *
+ * Copyright (C) 1997, 1999 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _SPARC64_FHC_H
+#define _SPARC64_FHC_H
+
+#include <linux/timer.h>
+
+#include <asm/oplib.h>
+#include <asm/prom.h>
+#include <asm/upa.h>
+
+struct linux_fhc;
+
+/* Clock board register offsets. */
+#define CLOCK_CTRL	0x00UL	/* Main control */
+#define CLOCK_STAT1	0x10UL	/* Status one */
+#define CLOCK_STAT2	0x20UL	/* Status two */
+#define CLOCK_PWRSTAT	0x30UL	/* Power status */
+#define CLOCK_PWRPRES	0x40UL	/* Power presence */
+#define CLOCK_TEMP	0x50UL	/* Temperature */
+#define CLOCK_IRQDIAG	0x60UL	/* IRQ diagnostics */
+#define CLOCK_PWRSTAT2	0x70UL	/* Power status two */
+
+#define CLOCK_CTRL_LLED		0x04	/* Left LED, 0 == on */
+#define CLOCK_CTRL_MLED		0x02	/* Mid LED, 1 == on */
+#define CLOCK_CTRL_RLED		0x01	/* RIght LED, 1 == on */
+
+struct linux_central {
+	struct linux_fhc		*child;
+	unsigned long			cfreg;
+	unsigned long			clkregs;
+	unsigned long			clkver;
+	int				slots;
+	struct device_node		*prom_node;
+
+	struct linux_prom_ranges	central_ranges[PROMREG_MAX];
+	int				num_central_ranges;
+};
+
+/* Firehose controller register offsets */
+struct fhc_regs {
+	unsigned long			pregs;	/* FHC internal regs */
+#define FHC_PREGS_ID	0x00UL	/* FHC ID */
+#define  FHC_ID_VERS		0xf0000000 /* Version of this FHC		*/
+#define  FHC_ID_PARTID		0x0ffff000 /* Part ID code (0x0f9f == FHC)	*/
+#define  FHC_ID_MANUF		0x0000007e /* Manufacturer (0x3e == SUN's JEDEC)*/
+#define  FHC_ID_RESV		0x00000001 /* Read as one			*/
+#define FHC_PREGS_RCS	0x10UL	/* FHC Reset Control/Status Register */
+#define  FHC_RCS_POR		0x80000000 /* Last reset was a power cycle	*/
+#define  FHC_RCS_SPOR		0x40000000 /* Last reset was sw power on reset	*/
+#define  FHC_RCS_SXIR		0x20000000 /* Last reset was sw XIR reset	*/
+#define  FHC_RCS_BPOR		0x10000000 /* Last reset was due to POR button	*/
+#define  FHC_RCS_BXIR		0x08000000 /* Last reset was due to XIR button	*/
+#define  FHC_RCS_WEVENT		0x04000000 /* CPU reset was due to wakeup event	*/
+#define  FHC_RCS_CFATAL		0x02000000 /* Centerplane Fatal Error signalled	*/
+#define  FHC_RCS_FENAB		0x01000000 /* Fatal errors elicit system reset	*/
+#define FHC_PREGS_CTRL	0x20UL	/* FHC Control Register */
+#define  FHC_CONTROL_ICS	0x00100000 /* Ignore Centerplane Signals	*/
+#define  FHC_CONTROL_FRST	0x00080000 /* Fatal Error Reset Enable		*/
+#define  FHC_CONTROL_LFAT	0x00040000 /* AC/DC signalled a local error	*/
+#define  FHC_CONTROL_SLINE	0x00010000 /* Firmware Synchronization Line	*/
+#define  FHC_CONTROL_DCD	0x00008000 /* DC-->DC Converter Disable		*/
+#define  FHC_CONTROL_POFF	0x00004000 /* AC/DC Controller PLL Disable	*/
+#define  FHC_CONTROL_FOFF	0x00002000 /* FHC Controller PLL Disable	*/
+#define  FHC_CONTROL_AOFF	0x00001000 /* CPU A SRAM/SBD Low Power Mode	*/
+#define  FHC_CONTROL_BOFF	0x00000800 /* CPU B SRAM/SBD Low Power Mode	*/
+#define  FHC_CONTROL_PSOFF	0x00000400 /* Turns off this FHC's power supply	*/
+#define  FHC_CONTROL_IXIST	0x00000200 /* 0=FHC tells clock board it exists	*/
+#define  FHC_CONTROL_XMSTR	0x00000100 /* 1=Causes this FHC to be XIR master*/
+#define  FHC_CONTROL_LLED	0x00000040 /* 0=Left LED ON			*/
+#define  FHC_CONTROL_MLED	0x00000020 /* 1=Middle LED ON			*/
+#define  FHC_CONTROL_RLED	0x00000010 /* 1=Right LED			*/
+#define  FHC_CONTROL_BPINS	0x00000003 /* Spare Bidirectional Pins		*/
+#define FHC_PREGS_BSR	0x30UL	/* FHC Board Status Register */
+#define  FHC_BSR_DA64		0x00040000 /* Port A: 0=128bit 1=64bit data path */
+#define  FHC_BSR_DB64		0x00020000 /* Port B: 0=128bit 1=64bit data path */
+#define  FHC_BSR_BID		0x0001e000 /* Board ID                           */
+#define  FHC_BSR_SA		0x00001c00 /* Port A UPA Speed (from the pins)   */
+#define  FHC_BSR_SB		0x00000380 /* Port B UPA Speed (from the pins)   */
+#define  FHC_BSR_NDIAG		0x00000040 /* Not in Diag Mode                   */
+#define  FHC_BSR_NTBED		0x00000020 /* Not in TestBED Mode                */
+#define  FHC_BSR_NIA		0x0000001c /* Jumper, bit 18 in PROM space       */
+#define  FHC_BSR_SI		0x00000001 /* Spare input pin value              */
+#define FHC_PREGS_ECC	0x40UL	/* FHC ECC Control Register (16 bits) */
+#define FHC_PREGS_JCTRL	0xf0UL	/* FHC JTAG Control Register */
+#define  FHC_JTAG_CTRL_MENAB	0x80000000 /* Indicates this is JTAG Master	 */
+#define  FHC_JTAG_CTRL_MNONE	0x40000000 /* Indicates no JTAG Master present	 */
+#define FHC_PREGS_JCMD	0x100UL	/* FHC JTAG Command Register */
+	unsigned long			ireg;	/* FHC IGN reg */
+#define FHC_IREG_IGN	0x00UL	/* This FHC's IGN */
+	unsigned long			ffregs;	/* FHC fanfail regs */
+#define FHC_FFREGS_IMAP	0x00UL	/* FHC Fanfail IMAP */
+#define FHC_FFREGS_ICLR	0x10UL	/* FHC Fanfail ICLR */
+	unsigned long			sregs;	/* FHC system regs */
+#define FHC_SREGS_IMAP	0x00UL	/* FHC System IMAP */
+#define FHC_SREGS_ICLR	0x10UL	/* FHC System ICLR */
+	unsigned long			uregs;	/* FHC uart regs */
+#define FHC_UREGS_IMAP	0x00UL	/* FHC Uart IMAP */
+#define FHC_UREGS_ICLR	0x10UL	/* FHC Uart ICLR */
+	unsigned long			tregs;	/* FHC TOD regs */
+#define FHC_TREGS_IMAP	0x00UL	/* FHC TOD IMAP */
+#define FHC_TREGS_ICLR	0x10UL	/* FHC TOD ICLR */
+};
+
+struct linux_fhc {
+	struct linux_fhc		*next;
+	struct linux_central		*parent;	/* NULL if not central FHC */
+	struct fhc_regs			fhc_regs;
+	int				board;
+	int				jtag_master;
+	struct device_node		*prom_node;
+
+	struct linux_prom_ranges	fhc_ranges[PROMREG_MAX];
+	int				num_fhc_ranges;
+};
+
+#endif /* !(_SPARC64_FHC_H) */
diff --git a/arch/sparc/include/asm/fixmap.h b/arch/sparc/include/asm/fixmap.h
new file mode 100644
index 0000000..f18fc07
--- /dev/null
+++ b/arch/sparc/include/asm/fixmap.h
@@ -0,0 +1,110 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ *
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ */
+
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+#include <linux/kernel.h>
+#include <asm/page.h>
+#ifdef CONFIG_HIGHMEM
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#endif
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special  addresses
+ * from the top of unused virtual memory (0xfd000000 - 1 page) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+
+/*
+ * on UP currently we will have no trace of the fixmap mechanism,
+ * no page table allocations, etc. This might change in the
+ * future, say framebuffers for the console driver(s) could be
+ * fix-mapped?
+ */
+enum fixed_addresses {
+	FIX_HOLE,
+#ifdef CONFIG_HIGHMEM
+	FIX_KMAP_BEGIN,
+	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+	__end_of_fixed_addresses
+};
+
+extern void __set_fixmap (enum fixed_addresses idx,
+					unsigned long phys, pgprot_t flags);
+
+#define set_fixmap(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL)
+/*
+ * Some hardware wants to get fixmapped without caching.
+ */
+#define set_fixmap_nocache(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+/*
+ * used by vmalloc.c.
+ *
+ * Leave one empty page between IO pages at 0xfd000000 and
+ * the start of the fixmap.
+ */
+#define FIXADDR_TOP	(0xfcfff000UL)
+#define FIXADDR_SIZE	((__end_of_fixed_addresses) << PAGE_SHIFT)
+#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
+
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)	((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	/*
+	 * this branch gets completely eliminated after inlining,
+	 * except when someone tries to use fixaddr indices in an
+	 * illegal way. (such as mixing up address types or using
+	 * out-of-range indices).
+	 *
+	 * If it doesn't get removed, the linker will complain
+	 * loudly with a reasonably clear error message..
+	 */
+	if (idx >= __end_of_fixed_addresses)
+		__this_fixmap_does_not_exist();
+
+        return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+	return __virt_to_fix(vaddr);
+}
+
+#endif
diff --git a/arch/sparc/include/asm/floppy.h b/arch/sparc/include/asm/floppy.h
new file mode 100644
index 0000000..faebd33
--- /dev/null
+++ b/arch/sparc/include/asm/floppy.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_FLOPPY_H
+#define ___ASM_SPARC_FLOPPY_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/floppy_64.h>
+#else
+#include <asm/floppy_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/floppy_32.h b/arch/sparc/include/asm/floppy_32.h
new file mode 100644
index 0000000..ae3f00b
--- /dev/null
+++ b/arch/sparc/include/asm/floppy_32.h
@@ -0,0 +1,388 @@
+/* asm/floppy.h: Sparc specific parts of the Floppy driver.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef __ASM_SPARC_FLOPPY_H
+#define __ASM_SPARC_FLOPPY_H
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/idprom.h>
+#include <asm/machines.h>
+#include <asm/oplib.h>
+#include <asm/auxio.h>
+#include <asm/irq.h>
+
+/* We don't need no stinkin' I/O port allocation crap. */
+#undef release_region
+#undef request_region
+#define release_region(X, Y)	do { } while(0)
+#define request_region(X, Y, Z)	(1)
+
+/* References:
+ * 1) Netbsd Sun floppy driver.
+ * 2) NCR 82077 controller manual
+ * 3) Intel 82077 controller manual
+ */
+struct sun_flpy_controller {
+	volatile unsigned char status_82072;  /* Main Status reg. */
+#define dcr_82072              status_82072   /* Digital Control reg. */
+#define status1_82077          status_82072   /* Auxiliary Status reg. 1 */
+
+	volatile unsigned char data_82072;    /* Data fifo. */
+#define status2_82077          data_82072     /* Auxiliary Status reg. 2 */
+
+	volatile unsigned char dor_82077;     /* Digital Output reg. */
+	volatile unsigned char tapectl_82077; /* What the? Tape control reg? */
+
+	volatile unsigned char status_82077;  /* Main Status Register. */
+#define drs_82077              status_82077   /* Digital Rate Select reg. */
+
+	volatile unsigned char data_82077;    /* Data fifo. */
+	volatile unsigned char ___unused;
+	volatile unsigned char dir_82077;     /* Digital Input reg. */
+#define dcr_82077              dir_82077      /* Config Control reg. */
+};
+
+/* You'll only ever find one controller on a SparcStation anyways. */
+static struct sun_flpy_controller *sun_fdc = NULL;
+extern volatile unsigned char *fdc_status;
+
+struct sun_floppy_ops {
+	unsigned char (*fd_inb)(int port);
+	void (*fd_outb)(unsigned char value, int port);
+};
+
+static struct sun_floppy_ops sun_fdops;
+
+#define fd_inb(port)              sun_fdops.fd_inb(port)
+#define fd_outb(value,port)       sun_fdops.fd_outb(value,port)
+#define fd_enable_dma()           sun_fd_enable_dma()
+#define fd_disable_dma()          sun_fd_disable_dma()
+#define fd_request_dma()          (0) /* nothing... */
+#define fd_free_dma()             /* nothing... */
+#define fd_clear_dma_ff()         /* nothing... */
+#define fd_set_dma_mode(mode)     sun_fd_set_dma_mode(mode)
+#define fd_set_dma_addr(addr)     sun_fd_set_dma_addr(addr)
+#define fd_set_dma_count(count)   sun_fd_set_dma_count(count)
+#define fd_enable_irq()           /* nothing... */
+#define fd_disable_irq()          /* nothing... */
+#define fd_cacheflush(addr, size) /* nothing... */
+#define fd_request_irq()          sun_fd_request_irq()
+#define fd_free_irq()             /* nothing... */
+#if 0  /* P3: added by Alain, these cause a MMU corruption. 19960524 XXX */
+#define fd_dma_mem_alloc(size)    ((unsigned long) vmalloc(size))
+#define fd_dma_mem_free(addr,size) (vfree((void *)(addr)))
+#endif
+
+/* XXX This isn't really correct. XXX */
+#define get_dma_residue(x)        (0)
+
+#define FLOPPY0_TYPE  4
+#define FLOPPY1_TYPE  0
+
+/* Super paranoid... */
+#undef HAVE_DISABLE_HLT
+
+/* Here is where we catch the floppy driver trying to initialize,
+ * therefore this is where we call the PROM device tree probing
+ * routine etc. on the Sparc.
+ */
+#define FDC1                      sun_floppy_init()
+
+#define N_FDC    1
+#define N_DRIVE  8
+
+/* No 64k boundary crossing problems on the Sparc. */
+#define CROSS_64KB(a,s) (0)
+
+/* Routines unique to each controller type on a Sun. */
+static void sun_set_dor(unsigned char value, int fdc_82077)
+{
+	if (sparc_cpu_model == sun4c) {
+		unsigned int bits = 0;
+		if (value & 0x10)
+			bits |= AUXIO_FLPY_DSEL;
+		if ((value & 0x80) == 0)
+			bits |= AUXIO_FLPY_EJCT;
+		set_auxio(bits, (~bits) & (AUXIO_FLPY_DSEL|AUXIO_FLPY_EJCT));
+	}
+	if (fdc_82077) {
+		sun_fdc->dor_82077 = value;
+	}
+}
+
+static unsigned char sun_read_dir(void)
+{
+	if (sparc_cpu_model == sun4c)
+		return (get_auxio() & AUXIO_FLPY_DCHG) ? 0x80 : 0;
+	else
+		return sun_fdc->dir_82077;
+}
+
+static unsigned char sun_82072_fd_inb(int port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to read unknown port %d\n", port);
+		panic("floppy: Port bolixed.");
+	case 4: /* FD_STATUS */
+		return sun_fdc->status_82072 & ~STATUS_DMA;
+	case 5: /* FD_DATA */
+		return sun_fdc->data_82072;
+	case 7: /* FD_DIR */
+		return sun_read_dir();
+	};
+	panic("sun_82072_fd_inb: How did I get here?");
+}
+
+static void sun_82072_fd_outb(unsigned char value, int port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to write to unknown port %d\n", port);
+		panic("floppy: Port bolixed.");
+	case 2: /* FD_DOR */
+		sun_set_dor(value, 0);
+		break;
+	case 5: /* FD_DATA */
+		sun_fdc->data_82072 = value;
+		break;
+	case 7: /* FD_DCR */
+		sun_fdc->dcr_82072 = value;
+		break;
+	case 4: /* FD_STATUS */
+		sun_fdc->status_82072 = value;
+		break;
+	};
+	return;
+}
+
+static unsigned char sun_82077_fd_inb(int port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to read unknown port %d\n", port);
+		panic("floppy: Port bolixed.");
+	case 0: /* FD_STATUS_0 */
+		return sun_fdc->status1_82077;
+	case 1: /* FD_STATUS_1 */
+		return sun_fdc->status2_82077;
+	case 2: /* FD_DOR */
+		return sun_fdc->dor_82077;
+	case 3: /* FD_TDR */
+		return sun_fdc->tapectl_82077;
+	case 4: /* FD_STATUS */
+		return sun_fdc->status_82077 & ~STATUS_DMA;
+	case 5: /* FD_DATA */
+		return sun_fdc->data_82077;
+	case 7: /* FD_DIR */
+		return sun_read_dir();
+	};
+	panic("sun_82077_fd_inb: How did I get here?");
+}
+
+static void sun_82077_fd_outb(unsigned char value, int port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to write to unknown port %d\n", port);
+		panic("floppy: Port bolixed.");
+	case 2: /* FD_DOR */
+		sun_set_dor(value, 1);
+		break;
+	case 5: /* FD_DATA */
+		sun_fdc->data_82077 = value;
+		break;
+	case 7: /* FD_DCR */
+		sun_fdc->dcr_82077 = value;
+		break;
+	case 4: /* FD_STATUS */
+		sun_fdc->status_82077 = value;
+		break;
+	case 3: /* FD_TDR */
+		sun_fdc->tapectl_82077 = value;
+		break;
+	};
+	return;
+}
+
+/* For pseudo-dma (Sun floppy drives have no real DMA available to
+ * them so we must eat the data fifo bytes directly ourselves) we have
+ * three state variables.  doing_pdma tells our inline low-level
+ * assembly floppy interrupt entry point whether it should sit and eat
+ * bytes from the fifo or just transfer control up to the higher level
+ * floppy interrupt c-code.  I tried very hard but I could not get the
+ * pseudo-dma to work in c-code without getting many overruns and
+ * underruns.  If non-zero, doing_pdma encodes the direction of
+ * the transfer for debugging.  1=read 2=write
+ */
+extern char *pdma_vaddr;
+extern unsigned long pdma_size;
+extern volatile int doing_pdma;
+
+/* This is software state */
+extern char *pdma_base;
+extern unsigned long pdma_areasize;
+
+/* Common routines to all controller types on the Sparc. */
+static inline void virtual_dma_init(void)
+{
+	/* nothing... */
+}
+
+static inline void sun_fd_disable_dma(void)
+{
+	doing_pdma = 0;
+	if (pdma_base) {
+		mmu_unlockarea(pdma_base, pdma_areasize);
+		pdma_base = NULL;
+	}
+}
+
+static inline void sun_fd_set_dma_mode(int mode)
+{
+	switch(mode) {
+	case DMA_MODE_READ:
+		doing_pdma = 1;
+		break;
+	case DMA_MODE_WRITE:
+		doing_pdma = 2;
+		break;
+	default:
+		printk("Unknown dma mode %d\n", mode);
+		panic("floppy: Giving up...");
+	}
+}
+
+static inline void sun_fd_set_dma_addr(char *buffer)
+{
+	pdma_vaddr = buffer;
+}
+
+static inline void sun_fd_set_dma_count(int length)
+{
+	pdma_size = length;
+}
+
+static inline void sun_fd_enable_dma(void)
+{
+	pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size);
+	pdma_base = pdma_vaddr;
+	pdma_areasize = pdma_size;
+}
+
+/* Our low-level entry point in arch/sparc/kernel/entry.S */
+extern int sparc_floppy_request_irq(int irq, unsigned long flags,
+				    irq_handler_t irq_handler);
+
+static int sun_fd_request_irq(void)
+{
+	static int once = 0;
+	int error;
+
+	if(!once) {
+		once = 1;
+		error = sparc_floppy_request_irq(FLOPPY_IRQ,
+						 IRQF_DISABLED,
+						 floppy_interrupt);
+		return ((error == 0) ? 0 : -1);
+	} else return 0;
+}
+
+static struct linux_prom_registers fd_regs[2];
+
+static int sun_floppy_init(void)
+{
+	char state[128];
+	int tnode, fd_node, num_regs;
+	struct resource r;
+
+	use_virtual_dma = 1;
+
+	FLOPPY_IRQ = 11;
+	/* Forget it if we aren't on a machine that could possibly
+	 * ever have a floppy drive.
+	 */
+	if((sparc_cpu_model != sun4c && sparc_cpu_model != sun4m) ||
+	   ((idprom->id_machtype == (SM_SUN4C | SM_4C_SLC)) ||
+	    (idprom->id_machtype == (SM_SUN4C | SM_4C_ELC)))) {
+		/* We certainly don't have a floppy controller. */
+		goto no_sun_fdc;
+	}
+	/* Well, try to find one. */
+	tnode = prom_getchild(prom_root_node);
+	fd_node = prom_searchsiblings(tnode, "obio");
+	if(fd_node != 0) {
+		tnode = prom_getchild(fd_node);
+		fd_node = prom_searchsiblings(tnode, "SUNW,fdtwo");
+	} else {
+		fd_node = prom_searchsiblings(tnode, "fd");
+	}
+	if(fd_node == 0) {
+		goto no_sun_fdc;
+	}
+
+	/* The sun4m lets us know if the controller is actually usable. */
+	if(sparc_cpu_model == sun4m &&
+	   prom_getproperty(fd_node, "status", state, sizeof(state)) != -1) {
+		if(!strcmp(state, "disabled")) {
+			goto no_sun_fdc;
+		}
+	}
+	num_regs = prom_getproperty(fd_node, "reg", (char *) fd_regs, sizeof(fd_regs));
+	num_regs = (num_regs / sizeof(fd_regs[0]));
+	prom_apply_obio_ranges(fd_regs, num_regs);
+	memset(&r, 0, sizeof(r));
+	r.flags = fd_regs[0].which_io;
+	r.start = fd_regs[0].phys_addr;
+	sun_fdc = (struct sun_flpy_controller *)
+	    sbus_ioremap(&r, 0, fd_regs[0].reg_size, "floppy");
+
+	/* Last minute sanity check... */
+	if(sun_fdc->status_82072 == 0xff) {
+		sun_fdc = NULL;
+		goto no_sun_fdc;
+	}
+
+	sun_fdops.fd_inb = sun_82077_fd_inb;
+	sun_fdops.fd_outb = sun_82077_fd_outb;
+	fdc_status = &sun_fdc->status_82077;
+
+	if (sun_fdc->dor_82077 == 0x80) {
+		sun_fdc->dor_82077 = 0x02;
+		if (sun_fdc->dor_82077 == 0x80) {
+			sun_fdops.fd_inb = sun_82072_fd_inb;
+			sun_fdops.fd_outb = sun_82072_fd_outb;
+			fdc_status = &sun_fdc->status_82072;
+		}
+	}
+
+	/* Success... */
+	allowed_drive_mask = 0x01;
+	return (int) sun_fdc;
+
+no_sun_fdc:
+	return -1;
+}
+
+static int sparc_eject(void)
+{
+	set_dor(0x00, 0xff, 0x90);
+	udelay(500);
+	set_dor(0x00, 0x6f, 0x00);
+	udelay(500);
+	return 0;
+}
+
+#define fd_eject(drive) sparc_eject()
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* !(__ASM_SPARC_FLOPPY_H) */
diff --git a/arch/sparc/include/asm/floppy_64.h b/arch/sparc/include/asm/floppy_64.h
new file mode 100644
index 0000000..c39db10
--- /dev/null
+++ b/arch/sparc/include/asm/floppy_64.h
@@ -0,0 +1,782 @@
+/* floppy.h: Sparc specific parts of the Floppy driver.
+ *
+ * Copyright (C) 1996, 2007 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ *
+ * Ultra/PCI support added: Sep 1997  Eddie C. Dost  (ecd@skynet.be)
+ */
+
+#ifndef __ASM_SPARC64_FLOPPY_H
+#define __ASM_SPARC64_FLOPPY_H
+
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/idprom.h>
+#include <asm/oplib.h>
+#include <asm/auxio.h>
+#include <asm/sbus.h>
+#include <asm/irq.h>
+
+
+/*
+ * Define this to enable exchanging drive 0 and 1 if only drive 1 is
+ * probed on PCI machines.
+ */
+#undef PCI_FDC_SWAP_DRIVES
+
+
+/* References:
+ * 1) Netbsd Sun floppy driver.
+ * 2) NCR 82077 controller manual
+ * 3) Intel 82077 controller manual
+ */
+struct sun_flpy_controller {
+	volatile unsigned char status1_82077; /* Auxiliary Status reg. 1 */
+	volatile unsigned char status2_82077; /* Auxiliary Status reg. 2 */
+	volatile unsigned char dor_82077;     /* Digital Output reg. */
+	volatile unsigned char tapectl_82077; /* Tape Control reg */
+	volatile unsigned char status_82077;  /* Main Status Register. */
+#define drs_82077              status_82077   /* Digital Rate Select reg. */
+	volatile unsigned char data_82077;    /* Data fifo. */
+	volatile unsigned char ___unused;
+	volatile unsigned char dir_82077;     /* Digital Input reg. */
+#define dcr_82077              dir_82077      /* Config Control reg. */
+};
+
+/* You'll only ever find one controller on an Ultra anyways. */
+static struct sun_flpy_controller *sun_fdc = (struct sun_flpy_controller *)-1;
+unsigned long fdc_status;
+static struct sbus_dev *floppy_sdev = NULL;
+
+struct sun_floppy_ops {
+	unsigned char	(*fd_inb) (unsigned long port);
+	void		(*fd_outb) (unsigned char value, unsigned long port);
+	void		(*fd_enable_dma) (void);
+	void		(*fd_disable_dma) (void);
+	void		(*fd_set_dma_mode) (int);
+	void		(*fd_set_dma_addr) (char *);
+	void		(*fd_set_dma_count) (int);
+	unsigned int	(*get_dma_residue) (void);
+	int		(*fd_request_irq) (void);
+	void		(*fd_free_irq) (void);
+	int		(*fd_eject) (int);
+};
+
+static struct sun_floppy_ops sun_fdops;
+
+#define fd_inb(port)              sun_fdops.fd_inb(port)
+#define fd_outb(value,port)       sun_fdops.fd_outb(value,port)
+#define fd_enable_dma()           sun_fdops.fd_enable_dma()
+#define fd_disable_dma()          sun_fdops.fd_disable_dma()
+#define fd_request_dma()          (0) /* nothing... */
+#define fd_free_dma()             /* nothing... */
+#define fd_clear_dma_ff()         /* nothing... */
+#define fd_set_dma_mode(mode)     sun_fdops.fd_set_dma_mode(mode)
+#define fd_set_dma_addr(addr)     sun_fdops.fd_set_dma_addr(addr)
+#define fd_set_dma_count(count)   sun_fdops.fd_set_dma_count(count)
+#define get_dma_residue(x)        sun_fdops.get_dma_residue()
+#define fd_cacheflush(addr, size) /* nothing... */
+#define fd_request_irq()          sun_fdops.fd_request_irq()
+#define fd_free_irq()             sun_fdops.fd_free_irq()
+#define fd_eject(drive)           sun_fdops.fd_eject(drive)
+
+/* Super paranoid... */
+#undef HAVE_DISABLE_HLT
+
+static int sun_floppy_types[2] = { 0, 0 };
+
+/* Here is where we catch the floppy driver trying to initialize,
+ * therefore this is where we call the PROM device tree probing
+ * routine etc. on the Sparc.
+ */
+#define FLOPPY0_TYPE		sun_floppy_init()
+#define FLOPPY1_TYPE		sun_floppy_types[1]
+
+#define FDC1			((unsigned long)sun_fdc)
+
+#define N_FDC    1
+#define N_DRIVE  8
+
+/* No 64k boundary crossing problems on the Sparc. */
+#define CROSS_64KB(a,s) (0)
+
+static unsigned char sun_82077_fd_inb(unsigned long port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to read unknown port %lx\n", port);
+		panic("floppy: Port bolixed.");
+	case 4: /* FD_STATUS */
+		return sbus_readb(&sun_fdc->status_82077) & ~STATUS_DMA;
+	case 5: /* FD_DATA */
+		return sbus_readb(&sun_fdc->data_82077);
+	case 7: /* FD_DIR */
+		/* XXX: Is DCL on 0x80 in sun4m? */
+		return sbus_readb(&sun_fdc->dir_82077);
+	};
+	panic("sun_82072_fd_inb: How did I get here?");
+}
+
+static void sun_82077_fd_outb(unsigned char value, unsigned long port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to write to unknown port %lx\n", port);
+		panic("floppy: Port bolixed.");
+	case 2: /* FD_DOR */
+		/* Happily, the 82077 has a real DOR register. */
+		sbus_writeb(value, &sun_fdc->dor_82077);
+		break;
+	case 5: /* FD_DATA */
+		sbus_writeb(value, &sun_fdc->data_82077);
+		break;
+	case 7: /* FD_DCR */
+		sbus_writeb(value, &sun_fdc->dcr_82077);
+		break;
+	case 4: /* FD_STATUS */
+		sbus_writeb(value, &sun_fdc->status_82077);
+		break;
+	};
+	return;
+}
+
+/* For pseudo-dma (Sun floppy drives have no real DMA available to
+ * them so we must eat the data fifo bytes directly ourselves) we have
+ * three state variables.  doing_pdma tells our inline low-level
+ * assembly floppy interrupt entry point whether it should sit and eat
+ * bytes from the fifo or just transfer control up to the higher level
+ * floppy interrupt c-code.  I tried very hard but I could not get the
+ * pseudo-dma to work in c-code without getting many overruns and
+ * underruns.  If non-zero, doing_pdma encodes the direction of
+ * the transfer for debugging.  1=read 2=write
+ */
+unsigned char *pdma_vaddr;
+unsigned long pdma_size;
+volatile int doing_pdma = 0;
+
+/* This is software state */
+char *pdma_base = NULL;
+unsigned long pdma_areasize;
+
+/* Common routines to all controller types on the Sparc. */
+static void sun_fd_disable_dma(void)
+{
+	doing_pdma = 0;
+	if (pdma_base) {
+		mmu_unlockarea(pdma_base, pdma_areasize);
+		pdma_base = NULL;
+	}
+}
+
+static void sun_fd_set_dma_mode(int mode)
+{
+	switch(mode) {
+	case DMA_MODE_READ:
+		doing_pdma = 1;
+		break;
+	case DMA_MODE_WRITE:
+		doing_pdma = 2;
+		break;
+	default:
+		printk("Unknown dma mode %d\n", mode);
+		panic("floppy: Giving up...");
+	}
+}
+
+static void sun_fd_set_dma_addr(char *buffer)
+{
+	pdma_vaddr = buffer;
+}
+
+static void sun_fd_set_dma_count(int length)
+{
+	pdma_size = length;
+}
+
+static void sun_fd_enable_dma(void)
+{
+	pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size);
+	pdma_base = pdma_vaddr;
+	pdma_areasize = pdma_size;
+}
+
+irqreturn_t sparc_floppy_irq(int irq, void *dev_cookie)
+{
+	if (likely(doing_pdma)) {
+		void __iomem *stat = (void __iomem *) fdc_status;
+		unsigned char *vaddr = pdma_vaddr;
+		unsigned long size = pdma_size;
+		u8 val;
+
+		while (size) {
+			val = readb(stat);
+			if (unlikely(!(val & 0x80))) {
+				pdma_vaddr = vaddr;
+				pdma_size = size;
+				return IRQ_HANDLED;
+			}
+			if (unlikely(!(val & 0x20))) {
+				pdma_vaddr = vaddr;
+				pdma_size = size;
+				doing_pdma = 0;
+				goto main_interrupt;
+			}
+			if (val & 0x40) {
+				/* read */
+				*vaddr++ = readb(stat + 1);
+			} else {
+				unsigned char data = *vaddr++;
+
+				/* write */
+				writeb(data, stat + 1);
+			}
+			size--;
+		}
+
+		pdma_vaddr = vaddr;
+		pdma_size = size;
+
+		/* Send Terminal Count pulse to floppy controller. */
+		val = readb(auxio_register);
+		val |= AUXIO_AUX1_FTCNT;
+		writeb(val, auxio_register);
+		val &= ~AUXIO_AUX1_FTCNT;
+		writeb(val, auxio_register);
+
+		doing_pdma = 0;
+	}
+
+main_interrupt:
+	return floppy_interrupt(irq, dev_cookie);
+}
+
+static int sun_fd_request_irq(void)
+{
+	static int once = 0;
+	int error;
+
+	if(!once) {
+		once = 1;
+
+		error = request_irq(FLOPPY_IRQ, sparc_floppy_irq,
+				    IRQF_DISABLED, "floppy", NULL);
+
+		return ((error == 0) ? 0 : -1);
+	}
+	return 0;
+}
+
+static void sun_fd_free_irq(void)
+{
+}
+
+static unsigned int sun_get_dma_residue(void)
+{
+	/* XXX This isn't really correct. XXX */
+	return 0;
+}
+
+static int sun_fd_eject(int drive)
+{
+	set_dor(0x00, 0xff, 0x90);
+	udelay(500);
+	set_dor(0x00, 0x6f, 0x00);
+	udelay(500);
+	return 0;
+}
+
+#ifdef CONFIG_PCI
+#include <asm/ebus.h>
+#include <asm/ns87303.h>
+
+static struct ebus_dma_info sun_pci_fd_ebus_dma;
+static struct pci_dev *sun_pci_ebus_dev;
+static int sun_pci_broken_drive = -1;
+
+struct sun_pci_dma_op {
+	unsigned int 	addr;
+	int		len;
+	int		direction;
+	char		*buf;
+};
+static struct sun_pci_dma_op sun_pci_dma_current = { -1U, 0, 0, NULL};
+static struct sun_pci_dma_op sun_pci_dma_pending = { -1U, 0, 0, NULL};
+
+extern irqreturn_t floppy_interrupt(int irq, void *dev_id);
+
+static unsigned char sun_pci_fd_inb(unsigned long port)
+{
+	udelay(5);
+	return inb(port);
+}
+
+static void sun_pci_fd_outb(unsigned char val, unsigned long port)
+{
+	udelay(5);
+	outb(val, port);
+}
+
+static void sun_pci_fd_broken_outb(unsigned char val, unsigned long port)
+{
+	udelay(5);
+	/*
+	 * XXX: Due to SUN's broken floppy connector on AX and AXi
+	 *      we need to turn on MOTOR_0 also, if the floppy is
+	 *      jumpered to DS1 (like most PC floppies are). I hope
+	 *      this does not hurt correct hardware like the AXmp.
+	 *      (Eddie, Sep 12 1998).
+	 */
+	if (port == ((unsigned long)sun_fdc) + 2) {
+		if (((val & 0x03) == sun_pci_broken_drive) && (val & 0x20)) {
+			val |= 0x10;
+		}
+	}
+	outb(val, port);
+}
+
+#ifdef PCI_FDC_SWAP_DRIVES
+static void sun_pci_fd_lde_broken_outb(unsigned char val, unsigned long port)
+{
+	udelay(5);
+	/*
+	 * XXX: Due to SUN's broken floppy connector on AX and AXi
+	 *      we need to turn on MOTOR_0 also, if the floppy is
+	 *      jumpered to DS1 (like most PC floppies are). I hope
+	 *      this does not hurt correct hardware like the AXmp.
+	 *      (Eddie, Sep 12 1998).
+	 */
+	if (port == ((unsigned long)sun_fdc) + 2) {
+		if (((val & 0x03) == sun_pci_broken_drive) && (val & 0x10)) {
+			val &= ~(0x03);
+			val |= 0x21;
+		}
+	}
+	outb(val, port);
+}
+#endif /* PCI_FDC_SWAP_DRIVES */
+
+static void sun_pci_fd_enable_dma(void)
+{
+	BUG_ON((NULL == sun_pci_dma_pending.buf) 	||
+	    (0	  == sun_pci_dma_pending.len) 	||
+	    (0	  == sun_pci_dma_pending.direction));
+
+	sun_pci_dma_current.buf = sun_pci_dma_pending.buf;
+	sun_pci_dma_current.len = sun_pci_dma_pending.len;
+	sun_pci_dma_current.direction = sun_pci_dma_pending.direction;
+
+	sun_pci_dma_pending.buf  = NULL;
+	sun_pci_dma_pending.len  = 0;
+	sun_pci_dma_pending.direction = 0;
+	sun_pci_dma_pending.addr = -1U;
+
+	sun_pci_dma_current.addr =
+		pci_map_single(sun_pci_ebus_dev,
+			       sun_pci_dma_current.buf,
+			       sun_pci_dma_current.len,
+			       sun_pci_dma_current.direction);
+
+	ebus_dma_enable(&sun_pci_fd_ebus_dma, 1);
+
+	if (ebus_dma_request(&sun_pci_fd_ebus_dma,
+			     sun_pci_dma_current.addr,
+			     sun_pci_dma_current.len))
+		BUG();
+}
+
+static void sun_pci_fd_disable_dma(void)
+{
+	ebus_dma_enable(&sun_pci_fd_ebus_dma, 0);
+	if (sun_pci_dma_current.addr != -1U)
+		pci_unmap_single(sun_pci_ebus_dev,
+				 sun_pci_dma_current.addr,
+				 sun_pci_dma_current.len,
+				 sun_pci_dma_current.direction);
+	sun_pci_dma_current.addr = -1U;
+}
+
+static void sun_pci_fd_set_dma_mode(int mode)
+{
+	if (mode == DMA_MODE_WRITE)
+		sun_pci_dma_pending.direction = PCI_DMA_TODEVICE;
+	else
+		sun_pci_dma_pending.direction = PCI_DMA_FROMDEVICE;
+
+	ebus_dma_prepare(&sun_pci_fd_ebus_dma, mode != DMA_MODE_WRITE);
+}
+
+static void sun_pci_fd_set_dma_count(int length)
+{
+	sun_pci_dma_pending.len = length;
+}
+
+static void sun_pci_fd_set_dma_addr(char *buffer)
+{
+	sun_pci_dma_pending.buf = buffer;
+}
+
+static unsigned int sun_pci_get_dma_residue(void)
+{
+	return ebus_dma_residue(&sun_pci_fd_ebus_dma);
+}
+
+static int sun_pci_fd_request_irq(void)
+{
+	return ebus_dma_irq_enable(&sun_pci_fd_ebus_dma, 1);
+}
+
+static void sun_pci_fd_free_irq(void)
+{
+	ebus_dma_irq_enable(&sun_pci_fd_ebus_dma, 0);
+}
+
+static int sun_pci_fd_eject(int drive)
+{
+	return -EINVAL;
+}
+
+void sun_pci_fd_dma_callback(struct ebus_dma_info *p, int event, void *cookie)
+{
+	floppy_interrupt(0, NULL);
+}
+
+/*
+ * Floppy probing, we'd like to use /dev/fd0 for a single Floppy on PCI,
+ * even if this is configured using DS1, thus looks like /dev/fd1 with
+ * the cabling used in Ultras.
+ */
+#define DOR	(port + 2)
+#define MSR	(port + 4)
+#define FIFO	(port + 5)
+
+static void sun_pci_fd_out_byte(unsigned long port, unsigned char val,
+			        unsigned long reg)
+{
+	unsigned char status;
+	int timeout = 1000;
+
+	while (!((status = inb(MSR)) & 0x80) && --timeout)
+		udelay(100);
+	outb(val, reg);
+}
+
+static unsigned char sun_pci_fd_sensei(unsigned long port)
+{
+	unsigned char result[2] = { 0x70, 0x00 };
+	unsigned char status;
+	int i = 0;
+
+	sun_pci_fd_out_byte(port, 0x08, FIFO);
+	do {
+		int timeout = 1000;
+
+		while (!((status = inb(MSR)) & 0x80) && --timeout)
+			udelay(100);
+
+		if (!timeout)
+			break;
+
+		if ((status & 0xf0) == 0xd0)
+			result[i++] = inb(FIFO);
+		else
+			break;
+	} while (i < 2);
+
+	return result[0];
+}
+
+static void sun_pci_fd_reset(unsigned long port)
+{
+	unsigned char mask = 0x00;
+	unsigned char status;
+	int timeout = 10000;
+
+	outb(0x80, MSR);
+	do {
+		status = sun_pci_fd_sensei(port);
+		if ((status & 0xc0) == 0xc0)
+			mask |= 1 << (status & 0x03);
+		else
+			udelay(100);
+	} while ((mask != 0x0f) && --timeout);
+}
+
+static int sun_pci_fd_test_drive(unsigned long port, int drive)
+{
+	unsigned char status, data;
+	int timeout = 1000;
+	int ready;
+
+	sun_pci_fd_reset(port);
+
+	data = (0x10 << drive) | 0x0c | drive;
+	sun_pci_fd_out_byte(port, data, DOR);
+
+	sun_pci_fd_out_byte(port, 0x07, FIFO);
+	sun_pci_fd_out_byte(port, drive & 0x03, FIFO);
+
+	do {
+		udelay(100);
+		status = sun_pci_fd_sensei(port);
+	} while (((status & 0xc0) == 0x80) && --timeout);
+
+	if (!timeout)
+		ready = 0;
+	else
+		ready = (status & 0x10) ? 0 : 1;
+
+	sun_pci_fd_reset(port);
+	return ready;
+}
+#undef FIFO
+#undef MSR
+#undef DOR
+
+#endif /* CONFIG_PCI */
+
+#ifdef CONFIG_PCI
+static int __init ebus_fdthree_p(struct linux_ebus_device *edev)
+{
+	if (!strcmp(edev->prom_node->name, "fdthree"))
+		return 1;
+	if (!strcmp(edev->prom_node->name, "floppy")) {
+		const char *compat;
+
+		compat = of_get_property(edev->prom_node,
+					 "compatible", NULL);
+		if (compat && !strcmp(compat, "fdthree"))
+			return 1;
+	}
+	return 0;
+}
+#endif
+
+static unsigned long __init sun_floppy_init(void)
+{
+	char state[128];
+	struct sbus_bus *bus;
+	struct sbus_dev *sdev = NULL;
+	static int initialized = 0;
+
+	if (initialized)
+		return sun_floppy_types[0];
+	initialized = 1;
+
+	for_all_sbusdev (sdev, bus) {
+		if (!strcmp(sdev->prom_name, "SUNW,fdtwo"))
+			break;
+	}
+	if(sdev) {
+		floppy_sdev = sdev;
+		FLOPPY_IRQ = sdev->irqs[0];
+	} else {
+#ifdef CONFIG_PCI
+		struct linux_ebus *ebus;
+		struct linux_ebus_device *edev = NULL;
+		unsigned long config = 0;
+		void __iomem *auxio_reg;
+		const char *state_prop;
+
+		for_each_ebus(ebus) {
+			for_each_ebusdev(edev, ebus) {
+				if (ebus_fdthree_p(edev))
+					goto ebus_done;
+			}
+		}
+	ebus_done:
+		if (!edev)
+			return 0;
+
+		state_prop = of_get_property(edev->prom_node, "status", NULL);
+		if (state_prop && !strncmp(state_prop, "disabled", 8))
+			return 0;
+
+		FLOPPY_IRQ = edev->irqs[0];
+
+		/* Make sure the high density bit is set, some systems
+		 * (most notably Ultra5/Ultra10) come up with it clear.
+		 */
+		auxio_reg = (void __iomem *) edev->resource[2].start;
+		writel(readl(auxio_reg)|0x2, auxio_reg);
+
+		sun_pci_ebus_dev = ebus->self;
+
+		spin_lock_init(&sun_pci_fd_ebus_dma.lock);
+
+		/* XXX ioremap */
+		sun_pci_fd_ebus_dma.regs = (void __iomem *)
+			edev->resource[1].start;
+		if (!sun_pci_fd_ebus_dma.regs)
+			return 0;
+
+		sun_pci_fd_ebus_dma.flags = (EBUS_DMA_FLAG_USE_EBDMA_HANDLER |
+					     EBUS_DMA_FLAG_TCI_DISABLE);
+		sun_pci_fd_ebus_dma.callback = sun_pci_fd_dma_callback;
+		sun_pci_fd_ebus_dma.client_cookie = NULL;
+		sun_pci_fd_ebus_dma.irq = FLOPPY_IRQ;
+		strcpy(sun_pci_fd_ebus_dma.name, "floppy");
+		if (ebus_dma_register(&sun_pci_fd_ebus_dma))
+			return 0;
+
+		/* XXX ioremap */
+		sun_fdc = (struct sun_flpy_controller *)edev->resource[0].start;
+
+		sun_fdops.fd_inb = sun_pci_fd_inb;
+		sun_fdops.fd_outb = sun_pci_fd_outb;
+
+		can_use_virtual_dma = use_virtual_dma = 0;
+		sun_fdops.fd_enable_dma = sun_pci_fd_enable_dma;
+		sun_fdops.fd_disable_dma = sun_pci_fd_disable_dma;
+		sun_fdops.fd_set_dma_mode = sun_pci_fd_set_dma_mode;
+		sun_fdops.fd_set_dma_addr = sun_pci_fd_set_dma_addr;
+		sun_fdops.fd_set_dma_count = sun_pci_fd_set_dma_count;
+		sun_fdops.get_dma_residue = sun_pci_get_dma_residue;
+
+		sun_fdops.fd_request_irq = sun_pci_fd_request_irq;
+		sun_fdops.fd_free_irq = sun_pci_fd_free_irq;
+
+		sun_fdops.fd_eject = sun_pci_fd_eject;
+
+		fdc_status = (unsigned long) &sun_fdc->status_82077;
+
+		/*
+		 * XXX: Find out on which machines this is really needed.
+		 */
+		if (1) {
+			sun_pci_broken_drive = 1;
+			sun_fdops.fd_outb = sun_pci_fd_broken_outb;
+		}
+
+		allowed_drive_mask = 0;
+		if (sun_pci_fd_test_drive((unsigned long)sun_fdc, 0))
+			sun_floppy_types[0] = 4;
+		if (sun_pci_fd_test_drive((unsigned long)sun_fdc, 1))
+			sun_floppy_types[1] = 4;
+
+		/*
+		 * Find NS87303 SuperIO config registers (through ecpp).
+		 */
+		for_each_ebus(ebus) {
+			for_each_ebusdev(edev, ebus) {
+				if (!strcmp(edev->prom_node->name, "ecpp")) {
+					config = edev->resource[1].start;
+					goto config_done;
+				}
+			}
+		}
+	config_done:
+
+		/*
+		 * Sanity check, is this really the NS87303?
+		 */
+		switch (config & 0x3ff) {
+		case 0x02e:
+		case 0x15c:
+		case 0x26e:
+		case 0x398:
+			break;
+		default:
+			config = 0;
+		}
+
+		if (!config)
+			return sun_floppy_types[0];
+
+		/* Enable PC-AT mode. */
+		ns87303_modify(config, ASC, 0, 0xc0);
+
+#ifdef PCI_FDC_SWAP_DRIVES
+		/*
+		 * If only Floppy 1 is present, swap drives.
+		 */
+		if (!sun_floppy_types[0] && sun_floppy_types[1]) {
+			/*
+			 * Set the drive exchange bit in FCR on NS87303,
+			 * make sure other bits are sane before doing so.
+			 */
+			ns87303_modify(config, FER, FER_EDM, 0);
+			ns87303_modify(config, ASC, ASC_DRV2_SEL, 0);
+			ns87303_modify(config, FCR, 0, FCR_LDE);
+
+			config = sun_floppy_types[0];
+			sun_floppy_types[0] = sun_floppy_types[1];
+			sun_floppy_types[1] = config;
+
+			if (sun_pci_broken_drive != -1) {
+				sun_pci_broken_drive = 1 - sun_pci_broken_drive;
+				sun_fdops.fd_outb = sun_pci_fd_lde_broken_outb;
+			}
+		}
+#endif /* PCI_FDC_SWAP_DRIVES */
+
+		return sun_floppy_types[0];
+#else
+		return 0;
+#endif
+	}
+	prom_getproperty(sdev->prom_node, "status", state, sizeof(state));
+	if(!strncmp(state, "disabled", 8))
+		return 0;
+
+	/*
+	 * We cannot do sbus_ioremap here: it does request_region,
+	 * which the generic floppy driver tries to do once again.
+	 * But we must use the sdev resource values as they have
+	 * had parent ranges applied.
+	 */
+	sun_fdc = (struct sun_flpy_controller *)
+		(sdev->resource[0].start +
+		 ((sdev->resource[0].flags & 0x1ffUL) << 32UL));
+
+	/* Last minute sanity check... */
+	if(sbus_readb(&sun_fdc->status1_82077) == 0xff) {
+		sun_fdc = (struct sun_flpy_controller *)-1;
+		return 0;
+	}
+
+        sun_fdops.fd_inb = sun_82077_fd_inb;
+        sun_fdops.fd_outb = sun_82077_fd_outb;
+
+	can_use_virtual_dma = use_virtual_dma = 1;
+	sun_fdops.fd_enable_dma = sun_fd_enable_dma;
+	sun_fdops.fd_disable_dma = sun_fd_disable_dma;
+	sun_fdops.fd_set_dma_mode = sun_fd_set_dma_mode;
+	sun_fdops.fd_set_dma_addr = sun_fd_set_dma_addr;
+	sun_fdops.fd_set_dma_count = sun_fd_set_dma_count;
+	sun_fdops.get_dma_residue = sun_get_dma_residue;
+
+	sun_fdops.fd_request_irq = sun_fd_request_irq;
+	sun_fdops.fd_free_irq = sun_fd_free_irq;
+
+	sun_fdops.fd_eject = sun_fd_eject;
+
+        fdc_status = (unsigned long) &sun_fdc->status_82077;
+
+	/* Success... */
+	allowed_drive_mask = 0x01;
+	sun_floppy_types[0] = 4;
+	sun_floppy_types[1] = 0;
+
+	return sun_floppy_types[0];
+}
+
+#define EXTRA_FLOPPY_PARAMS
+
+static DEFINE_SPINLOCK(dma_spin_lock);
+
+#define claim_dma_lock() \
+({	unsigned long flags; \
+	spin_lock_irqsave(&dma_spin_lock, flags); \
+	flags; \
+})
+
+#define release_dma_lock(__flags) \
+	spin_unlock_irqrestore(&dma_spin_lock, __flags);
+
+#endif /* !(__ASM_SPARC64_FLOPPY_H) */
diff --git a/arch/sparc/include/asm/fpumacro.h b/arch/sparc/include/asm/fpumacro.h
new file mode 100644
index 0000000..cc463fe
--- /dev/null
+++ b/arch/sparc/include/asm/fpumacro.h
@@ -0,0 +1,33 @@
+/* fpumacro.h: FPU related macros.
+ *
+ * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC64_FPUMACRO_H
+#define _SPARC64_FPUMACRO_H
+
+#include <asm/asi.h>
+#include <asm/visasm.h>
+
+struct fpustate {
+	u32	regs[64];
+};
+
+#define FPUSTATE (struct fpustate *)(current_thread_info()->fpregs)
+
+static inline unsigned long fprs_read(void)
+{
+	unsigned long retval;
+
+	__asm__ __volatile__("rd %%fprs, %0" : "=r" (retval));
+
+	return retval;
+}
+
+static inline void fprs_write(unsigned long val)
+{
+	__asm__ __volatile__("wr %0, 0x0, %%fprs" : : "r" (val));
+}
+
+#endif /* !(_SPARC64_FPUMACRO_H) */
diff --git a/arch/sparc/include/asm/ftrace.h b/arch/sparc/include/asm/ftrace.h
new file mode 100644
index 0000000..d27716c
--- /dev/null
+++ b/arch/sparc/include/asm/ftrace.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_SPARC64_FTRACE
+#define _ASM_SPARC64_FTRACE
+
+#ifdef CONFIG_MCOUNT
+#define MCOUNT_ADDR		((long)(_mcount))
+#define MCOUNT_INSN_SIZE	4 /* sizeof mcount call */
+
+#ifndef __ASSEMBLY__
+extern void _mcount(void);
+#endif
+
+#endif
+
+#endif /* _ASM_SPARC64_FTRACE */
diff --git a/arch/sparc/include/asm/futex.h b/arch/sparc/include/asm/futex.h
new file mode 100644
index 0000000..736335f
--- /dev/null
+++ b/arch/sparc/include/asm/futex.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_FUTEX_H
+#define ___ASM_SPARC_FUTEX_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/futex_64.h>
+#else
+#include <asm/futex_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/futex_32.h b/arch/sparc/include/asm/futex_32.h
new file mode 100644
index 0000000..6a332a9
--- /dev/null
+++ b/arch/sparc/include/asm/futex_32.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#include <asm-generic/futex.h>
+
+#endif
diff --git a/arch/sparc/include/asm/futex_64.h b/arch/sparc/include/asm/futex_64.h
new file mode 100644
index 0000000..d837893
--- /dev/null
+++ b/arch/sparc/include/asm/futex_64.h
@@ -0,0 +1,110 @@
+#ifndef _SPARC64_FUTEX_H
+#define _SPARC64_FUTEX_H
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+#include <asm/system.h>
+
+#define __futex_cas_op(insn, ret, oldval, uaddr, oparg)	\
+	__asm__ __volatile__(				\
+	"\n1:	lduwa	[%3] %%asi, %2\n"		\
+	"	" insn "\n"				\
+	"2:	casa	[%3] %%asi, %2, %1\n"		\
+	"	cmp	%2, %1\n"			\
+	"	bne,pn	%%icc, 1b\n"			\
+	"	 mov	0, %0\n"			\
+	"3:\n"						\
+	"	.section .fixup,#alloc,#execinstr\n"	\
+	"	.align	4\n"				\
+	"4:	sethi	%%hi(3b), %0\n"			\
+	"	jmpl	%0 + %%lo(3b), %%g0\n"		\
+	"	 mov	%5, %0\n"			\
+	"	.previous\n"				\
+	"	.section __ex_table,\"a\"\n"		\
+	"	.align	4\n"				\
+	"	.word	1b, 4b\n"			\
+	"	.word	2b, 4b\n"			\
+	"	.previous\n"				\
+	: "=&r" (ret), "=&r" (oldval), "=&r" (tem)	\
+	: "r" (uaddr), "r" (oparg), "i" (-EFAULT)	\
+	: "memory")
+
+static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret, tem;
+
+	if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(int))))
+		return -EFAULT;
+	if (unlikely((((unsigned long) uaddr) & 0x3UL)))
+		return -EINVAL;
+
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	pagefault_disable();
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_cas_op("mov\t%4, %1", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ADD:
+		__futex_cas_op("add\t%2, %4, %1", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_cas_op("or\t%2, %4, %1", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_cas_op("and\t%2, %4, %1", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_cas_op("xor\t%2, %4, %1", ret, oldval, uaddr, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	pagefault_enable();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+	__asm__ __volatile__(
+	"\n1:	casa	[%3] %%asi, %2, %0\n"
+	"2:\n"
+	"	.section .fixup,#alloc,#execinstr\n"
+	"	.align	4\n"
+	"3:	sethi	%%hi(2b), %0\n"
+	"	jmpl	%0 + %%lo(2b), %%g0\n"
+	"	 mov	%4, %0\n"
+	"	.previous\n"
+	"	.section __ex_table,\"a\"\n"
+	"	.align	4\n"
+	"	.word	1b, 3b\n"
+	"	.previous\n"
+	: "=r" (newval)
+	: "0" (newval), "r" (oldval), "r" (uaddr), "i" (-EFAULT)
+	: "memory");
+
+	return newval;
+}
+
+#endif /* !(_SPARC64_FUTEX_H) */
diff --git a/arch/sparc/include/asm/hardirq.h b/arch/sparc/include/asm/hardirq.h
new file mode 100644
index 0000000..44d4e23
--- /dev/null
+++ b/arch/sparc/include/asm/hardirq.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_HARDIRQ_H
+#define ___ASM_SPARC_HARDIRQ_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/hardirq_64.h>
+#else
+#include <asm/hardirq_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/hardirq_32.h b/arch/sparc/include/asm/hardirq_32.h
new file mode 100644
index 0000000..4f63ed8
--- /dev/null
+++ b/arch/sparc/include/asm/hardirq_32.h
@@ -0,0 +1,23 @@
+/* hardirq.h: 32-bit Sparc hard IRQ support.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1998-2000 Anton Blanchard (anton@samba.org)
+ */
+
+#ifndef __SPARC_HARDIRQ_H
+#define __SPARC_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/spinlock.h>
+#include <linux/cache.h>
+
+/* entry.S is sensitive to the offsets of these fields */ /* XXX P3 Is it? */
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS    8
+
+#endif /* __SPARC_HARDIRQ_H */
diff --git a/arch/sparc/include/asm/hardirq_64.h b/arch/sparc/include/asm/hardirq_64.h
new file mode 100644
index 0000000..7c29fd1
--- /dev/null
+++ b/arch/sparc/include/asm/hardirq_64.h
@@ -0,0 +1,19 @@
+/* hardirq.h: 64-bit Sparc hard IRQ support.
+ *
+ * Copyright (C) 1997, 1998, 2005 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef __SPARC64_HARDIRQ_H
+#define __SPARC64_HARDIRQ_H
+
+#include <asm/cpudata.h>
+
+#define __ARCH_IRQ_STAT
+#define local_softirq_pending() \
+	(local_cpu_data().__softirq_pending)
+
+void ack_bad_irq(unsigned int irq);
+
+#define HARDIRQ_BITS	8
+
+#endif /* !(__SPARC64_HARDIRQ_H) */
diff --git a/arch/sparc/include/asm/head.h b/arch/sparc/include/asm/head.h
new file mode 100644
index 0000000..be8f03f
--- /dev/null
+++ b/arch/sparc/include/asm/head.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_HEAD_H
+#define ___ASM_SPARC_HEAD_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/head_64.h>
+#else
+#include <asm/head_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/head_32.h b/arch/sparc/include/asm/head_32.h
new file mode 100644
index 0000000..7c35491
--- /dev/null
+++ b/arch/sparc/include/asm/head_32.h
@@ -0,0 +1,102 @@
+#ifndef __SPARC_HEAD_H
+#define __SPARC_HEAD_H
+
+#define KERNBASE        0xf0000000  /* First address the kernel will eventually be */
+#define LOAD_ADDR       0x4000      /* prom jumps to us here unless this is elf /boot */
+#define SUN4C_SEGSZ     (1 << 18)
+#define SRMMU_L1_KBASE_OFFSET ((KERNBASE>>24)<<2)  /* Used in boot remapping. */
+#define INTS_ENAB        0x01           /* entry.S uses this. */
+
+#define SUN4_PROM_VECTOR 0xFFE81000     /* SUN4 PROM needs to be hardwired */
+
+#define WRITE_PAUSE      nop; nop; nop; /* Have to do this after %wim/%psr chg */
+#define NOP_INSN         0x01000000     /* Used to patch sparc_save_state */
+
+/* Here are some trap goodies */
+
+/* Generic trap entry. */
+#define TRAP_ENTRY(type, label) \
+	rd %psr, %l0; b label; rd %wim, %l3; nop;
+
+/* Data/text faults. Defaults to sun4c version at boot time. */
+#define SPARC_TFAULT rd %psr, %l0; rd %wim, %l3; b sun4c_fault; mov 1, %l7;
+#define SPARC_DFAULT rd %psr, %l0; rd %wim, %l3; b sun4c_fault; mov 0, %l7;
+#define SRMMU_TFAULT rd %psr, %l0; rd %wim, %l3; b srmmu_fault; mov 1, %l7;
+#define SRMMU_DFAULT rd %psr, %l0; rd %wim, %l3; b srmmu_fault; mov 0, %l7;
+
+/* This is for traps we should NEVER get. */
+#define BAD_TRAP(num) \
+        rd %psr, %l0; mov num, %l7; b bad_trap_handler; rd %wim, %l3;
+
+/* This is for traps when we want just skip the instruction which caused it */
+#define SKIP_TRAP(type, name) \
+	jmpl %l2, %g0; rett %l2 + 4; nop; nop;
+
+/* Notice that for the system calls we pull a trick.  We load up a
+ * different pointer to the system call vector table in %l7, but call
+ * the same generic system call low-level entry point.  The trap table
+ * entry sequences are also HyperSparc pipeline friendly ;-)
+ */
+
+/* Software trap for Linux system calls. */
+#define LINUX_SYSCALL_TRAP \
+        sethi %hi(sys_call_table), %l7; \
+        or %l7, %lo(sys_call_table), %l7; \
+        b linux_sparc_syscall; \
+        rd %psr, %l0;
+
+#define BREAKPOINT_TRAP \
+	b breakpoint_trap; \
+	rd %psr,%l0; \
+	nop; \
+	nop;
+
+#ifdef CONFIG_KGDB
+#define KGDB_TRAP(num) \
+	b kgdb_trap_low; \
+	rd %psr,%l0; \
+	nop; \
+	nop;
+#else
+#define KGDB_TRAP(num) \
+	BAD_TRAP(num)
+#endif
+
+/* The Get Condition Codes software trap for userland. */
+#define GETCC_TRAP \
+        b getcc_trap_handler; mov %psr, %l0; nop; nop;
+
+/* The Set Condition Codes software trap for userland. */
+#define SETCC_TRAP \
+        b setcc_trap_handler; mov %psr, %l0; nop; nop;
+
+/* The Get PSR software trap for userland. */
+#define GETPSR_TRAP \
+	mov %psr, %i0; jmp %l2; rett %l2 + 4; nop;
+
+/* This is for hard interrupts from level 1-14, 15 is non-maskable (nmi) and
+ * gets handled with another macro.
+ */
+#define TRAP_ENTRY_INTERRUPT(int_level) \
+        mov int_level, %l7; rd %psr, %l0; b real_irq_entry; rd %wim, %l3;
+
+/* NMI's (Non Maskable Interrupts) are special, you can't keep them
+ * from coming in, and basically if you get one, the shows over. ;(
+ * On the sun4c they are usually asynchronous memory errors, on the
+ * the sun4m they could be either due to mem errors or a software
+ * initiated interrupt from the prom/kern on an SMP box saying "I
+ * command you to do CPU tricks, read your mailbox for more info."
+ */
+#define NMI_TRAP \
+        rd %wim, %l3; b linux_trap_nmi_sun4c; mov %psr, %l0; nop;
+
+/* Window overflows/underflows are special and we need to try to be as
+ * efficient as possible here....
+ */
+#define WINDOW_SPILL \
+        rd %psr, %l0; rd %wim, %l3; b spill_window_entry; andcc %l0, PSR_PS, %g0;
+
+#define WINDOW_FILL \
+        rd %psr, %l0; rd %wim, %l3; b fill_window_entry; andcc %l0, PSR_PS, %g0;
+
+#endif /* __SPARC_HEAD_H */
diff --git a/arch/sparc/include/asm/head_64.h b/arch/sparc/include/asm/head_64.h
new file mode 100644
index 0000000..10e9dab
--- /dev/null
+++ b/arch/sparc/include/asm/head_64.h
@@ -0,0 +1,76 @@
+#ifndef _SPARC64_HEAD_H
+#define _SPARC64_HEAD_H
+
+#include <asm/pstate.h>
+
+	/* wrpr	%g0, val, %gl */
+#define SET_GL(val)	\
+	.word	0xa1902000 | val
+
+	/* rdpr %gl, %gN */
+#define GET_GL_GLOBAL(N)	\
+	.word	0x81540000 | (N << 25)
+
+#define KERNBASE	0x400000
+
+#define	PTREGS_OFF	(STACK_BIAS + STACKFRAME_SZ)
+
+#define __CHEETAH_ID	0x003e0014
+#define __JALAPENO_ID	0x003e0016
+#define __SERRANO_ID	0x003e0022
+
+#define CHEETAH_MANUF		0x003e
+#define CHEETAH_IMPL		0x0014 /* Ultra-III   */
+#define CHEETAH_PLUS_IMPL	0x0015 /* Ultra-III+  */
+#define JALAPENO_IMPL		0x0016 /* Ultra-IIIi  */
+#define JAGUAR_IMPL		0x0018 /* Ultra-IV    */
+#define PANTHER_IMPL		0x0019 /* Ultra-IV+   */
+#define SERRANO_IMPL		0x0022 /* Ultra-IIIi+ */
+
+#define BRANCH_IF_SUN4V(tmp1,label)		\
+	sethi	%hi(is_sun4v), %tmp1;		\
+	lduw	[%tmp1 + %lo(is_sun4v)], %tmp1; \
+	brnz,pn	%tmp1, label;			\
+	 nop
+
+#define BRANCH_IF_CHEETAH_BASE(tmp1,tmp2,label)	\
+	rdpr	%ver, %tmp1;			\
+	sethi	%hi(__CHEETAH_ID), %tmp2;	\
+	srlx	%tmp1, 32, %tmp1;		\
+	or	%tmp2, %lo(__CHEETAH_ID), %tmp2;\
+	cmp	%tmp1, %tmp2;			\
+	be,pn	%icc, label;			\
+	 nop;
+
+#define BRANCH_IF_JALAPENO(tmp1,tmp2,label)	\
+	rdpr	%ver, %tmp1;			\
+	sethi	%hi(__JALAPENO_ID), %tmp2;	\
+	srlx	%tmp1, 32, %tmp1;		\
+	or	%tmp2, %lo(__JALAPENO_ID), %tmp2;\
+	cmp	%tmp1, %tmp2;			\
+	be,pn	%icc, label;			\
+	 nop;
+
+#define BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(tmp1,tmp2,label)	\
+	rdpr	%ver, %tmp1;			\
+	srlx	%tmp1, (32 + 16), %tmp2;	\
+	cmp	%tmp2, CHEETAH_MANUF;		\
+	bne,pt	%xcc, 99f;			\
+	 sllx	%tmp1, 16, %tmp1;		\
+	srlx	%tmp1, (32 + 16), %tmp2;	\
+	cmp	%tmp2, CHEETAH_PLUS_IMPL;	\
+	bgeu,pt	%xcc, label;			\
+99:	 nop;
+
+#define BRANCH_IF_ANY_CHEETAH(tmp1,tmp2,label)	\
+	rdpr	%ver, %tmp1;			\
+	srlx	%tmp1, (32 + 16), %tmp2;	\
+	cmp	%tmp2, CHEETAH_MANUF;		\
+	bne,pt	%xcc, 99f;			\
+	 sllx	%tmp1, 16, %tmp1;		\
+	srlx	%tmp1, (32 + 16), %tmp2;	\
+	cmp	%tmp2, CHEETAH_IMPL;		\
+	bgeu,pt	%xcc, label;			\
+99:	 nop;
+
+#endif /* !(_SPARC64_HEAD_H) */
diff --git a/arch/sparc/include/asm/highmem.h b/arch/sparc/include/asm/highmem.h
new file mode 100644
index 0000000..3de42e7
--- /dev/null
+++ b/arch/sparc/include/asm/highmem.h
@@ -0,0 +1,81 @@
+/*
+ * highmem.h: virtual kernel memory mappings for high memory
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ *		      Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with 
+ * up to 16 Terrabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/interrupt.h>
+#include <asm/fixmap.h>
+#include <asm/vaddrs.h>
+#include <asm/kmap_types.h>
+#include <asm/pgtable.h>
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+extern void kmap_init(void) __init;
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.  Currently the simplest way to do this is to align the
+ * pkmap region on a pagetable boundary (4MB).
+ */
+#define LAST_PKMAP 1024
+#define PKMAP_SIZE (LAST_PKMAP << PAGE_SHIFT)
+#define PKMAP_BASE PMD_ALIGN(SRMMU_NOCACHE_VADDR + (SRMMU_MAX_NOCACHE_PAGES << PAGE_SHIFT))
+
+#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
+#define PKMAP_NR(virt)  ((virt - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+#define PKMAP_END (PKMAP_ADDR(LAST_PKMAP))
+
+extern void *kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+static inline void *kmap(struct page *page)
+{
+	BUG_ON(in_interrupt());
+	if (!PageHighMem(page))
+		return page_address(page);
+	return kmap_high(page);
+}
+
+static inline void kunmap(struct page *page)
+{
+	BUG_ON(in_interrupt());
+	if (!PageHighMem(page))
+		return;
+	kunmap_high(page);
+}
+
+extern void *kmap_atomic(struct page *page, enum km_type type);
+extern void kunmap_atomic(void *kvaddr, enum km_type type);
+extern struct page *kmap_atomic_to_page(void *vaddr);
+
+#define flush_cache_kmaps()	flush_cache_all()
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/arch/sparc/include/asm/hugetlb.h b/arch/sparc/include/asm/hugetlb.h
new file mode 100644
index 0000000..1770610
--- /dev/null
+++ b/arch/sparc/include/asm/hugetlb.h
@@ -0,0 +1,85 @@
+#ifndef _ASM_SPARC64_HUGETLB_H
+#define _ASM_SPARC64_HUGETLB_H
+
+#include <asm/page.h>
+
+
+void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+		     pte_t *ptep, pte_t pte);
+
+pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep);
+
+void hugetlb_prefault_arch_hook(struct mm_struct *mm);
+
+static inline int is_hugepage_only_range(struct mm_struct *mm,
+					 unsigned long addr,
+					 unsigned long len) {
+	return 0;
+}
+
+/*
+ * If the arch doesn't supply something else, assume that hugepage
+ * size aligned regions are ok without further preparation.
+ */
+static inline int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len)
+{
+	if (len & ~HPAGE_MASK)
+		return -EINVAL;
+	if (addr & ~HPAGE_MASK)
+		return -EINVAL;
+	return 0;
+}
+
+static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb,
+					  unsigned long addr, unsigned long end,
+					  unsigned long floor,
+					  unsigned long ceiling)
+{
+	free_pgd_range(tlb, addr, end, floor, ceiling);
+}
+
+static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
+					 unsigned long addr, pte_t *ptep)
+{
+}
+
+static inline int huge_pte_none(pte_t pte)
+{
+	return pte_none(pte);
+}
+
+static inline pte_t huge_pte_wrprotect(pte_t pte)
+{
+	return pte_wrprotect(pte);
+}
+
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+					   unsigned long addr, pte_t *ptep)
+{
+	ptep_set_wrprotect(mm, addr, ptep);
+}
+
+static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+					     unsigned long addr, pte_t *ptep,
+					     pte_t pte, int dirty)
+{
+	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+}
+
+static inline pte_t huge_ptep_get(pte_t *ptep)
+{
+	return *ptep;
+}
+
+static inline int arch_prepare_hugepage(struct page *page)
+{
+	return 0;
+}
+
+static inline void arch_release_hugepage(struct page *page)
+{
+}
+
+#endif /* _ASM_SPARC64_HUGETLB_H */
diff --git a/arch/sparc/include/asm/hvtramp.h b/arch/sparc/include/asm/hvtramp.h
new file mode 100644
index 0000000..b2b9b94
--- /dev/null
+++ b/arch/sparc/include/asm/hvtramp.h
@@ -0,0 +1,37 @@
+#ifndef _SPARC64_HVTRAP_H
+#define _SPARC64_HVTRAP_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+struct hvtramp_mapping {
+	__u64		vaddr;
+	__u64		tte;
+};
+
+struct hvtramp_descr {
+	__u32			cpu;
+	__u32			num_mappings;
+	__u64			fault_info_va;
+	__u64			fault_info_pa;
+	__u64			thread_reg;
+	struct hvtramp_mapping	maps[1];
+};
+
+extern void hv_cpu_startup(unsigned long hvdescr_pa);
+
+#endif
+
+#define HVTRAMP_DESCR_CPU		0x00
+#define HVTRAMP_DESCR_NUM_MAPPINGS	0x04
+#define HVTRAMP_DESCR_FAULT_INFO_VA	0x08
+#define HVTRAMP_DESCR_FAULT_INFO_PA	0x10
+#define HVTRAMP_DESCR_THREAD_REG	0x18
+#define HVTRAMP_DESCR_MAPS		0x20
+
+#define HVTRAMP_MAPPING_VADDR		0x00
+#define HVTRAMP_MAPPING_TTE		0x08
+#define HVTRAMP_MAPPING_SIZE		0x10
+
+#endif /* _SPARC64_HVTRAP_H */
diff --git a/arch/sparc/include/asm/hw_irq.h b/arch/sparc/include/asm/hw_irq.h
new file mode 100644
index 0000000..8d30a76
--- /dev/null
+++ b/arch/sparc/include/asm/hw_irq.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SPARC_HW_IRQ_H
+#define __ASM_SPARC_HW_IRQ_H
+
+/* Dummy include. */
+
+#endif
diff --git a/arch/sparc/include/asm/hypervisor.h b/arch/sparc/include/asm/hypervisor.h
new file mode 100644
index 0000000..109ae24
--- /dev/null
+++ b/arch/sparc/include/asm/hypervisor.h
@@ -0,0 +1,2949 @@
+#ifndef _SPARC64_HYPERVISOR_H
+#define _SPARC64_HYPERVISOR_H
+
+/* Sun4v hypervisor interfaces and defines.
+ *
+ * Hypervisor calls are made via traps to software traps number 0x80
+ * and above.  Registers %o0 to %o5 serve as argument, status, and
+ * return value registers.
+ *
+ * There are two kinds of these traps.  First there are the normal
+ * "fast traps" which use software trap 0x80 and encode the function
+ * to invoke by number in register %o5.  Argument and return value
+ * handling is as follows:
+ *
+ * -----------------------------------------------
+ * |  %o5  | function number |     undefined     |
+ * |  %o0  |   argument 0    |   return status   |
+ * |  %o1  |   argument 1    |   return value 1  |
+ * |  %o2  |   argument 2    |   return value 2  |
+ * |  %o3  |   argument 3    |   return value 3  |
+ * |  %o4  |   argument 4    |   return value 4  |
+ * -----------------------------------------------
+ *
+ * The second type are "hyper-fast traps" which encode the function
+ * number in the software trap number itself.  So these use trap
+ * numbers > 0x80.  The register usage for hyper-fast traps is as
+ * follows:
+ *
+ * -----------------------------------------------
+ * |  %o0  |   argument 0    |   return status   |
+ * |  %o1  |   argument 1    |   return value 1  |
+ * |  %o2  |   argument 2    |   return value 2  |
+ * |  %o3  |   argument 3    |   return value 3  |
+ * |  %o4  |   argument 4    |   return value 4  |
+ * -----------------------------------------------
+ *
+ * Registers providing explicit arguments to the hypervisor calls
+ * are volatile across the call.  Upon return their values are
+ * undefined unless explicitly specified as containing a particular
+ * return value by the specific call.  The return status is always
+ * returned in register %o0, zero indicates a successful execution of
+ * the hypervisor call and other values indicate an error status as
+ * defined below.  So, for example, if a hyper-fast trap takes
+ * arguments 0, 1, and 2, then %o0, %o1, and %o2 are volatile across
+ * the call and %o3, %o4, and %o5 would be preserved.
+ *
+ * If the hypervisor trap is invalid, or the fast trap function number
+ * is invalid, HV_EBADTRAP will be returned in %o0.  Also, all 64-bits
+ * of the argument and return values are significant.
+ */
+
+/* Trap numbers.  */
+#define HV_FAST_TRAP		0x80
+#define HV_MMU_MAP_ADDR_TRAP	0x83
+#define HV_MMU_UNMAP_ADDR_TRAP	0x84
+#define HV_TTRACE_ADDENTRY_TRAP	0x85
+#define HV_CORE_TRAP		0xff
+
+/* Error codes.  */
+#define HV_EOK				0  /* Successful return            */
+#define HV_ENOCPU			1  /* Invalid CPU id               */
+#define HV_ENORADDR			2  /* Invalid real address         */
+#define HV_ENOINTR			3  /* Invalid interrupt id         */
+#define HV_EBADPGSZ			4  /* Invalid pagesize encoding    */
+#define HV_EBADTSB			5  /* Invalid TSB description      */
+#define HV_EINVAL			6  /* Invalid argument             */
+#define HV_EBADTRAP			7  /* Invalid function number      */
+#define HV_EBADALIGN			8  /* Invalid address alignment    */
+#define HV_EWOULDBLOCK			9  /* Cannot complete w/o blocking */
+#define HV_ENOACCESS			10 /* No access to resource        */
+#define HV_EIO				11 /* I/O error                    */
+#define HV_ECPUERROR			12 /* CPU in error state           */
+#define HV_ENOTSUPPORTED		13 /* Function not supported       */
+#define HV_ENOMAP			14 /* No mapping found             */
+#define HV_ETOOMANY			15 /* Too many items specified     */
+#define HV_ECHANNEL			16 /* Invalid LDC channel          */
+#define HV_EBUSY			17 /* Resource busy                */
+
+/* mach_exit()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MACH_EXIT
+ * ARG0:	exit code
+ * ERRORS:	This service does not return.
+ *
+ * Stop all CPUs in the virtual domain and place them into the stopped
+ * state.  The 64-bit exit code may be passed to a service entity as
+ * the domain's exit status.  On systems without a service entity, the
+ * domain will undergo a reset, and the boot firmware will be
+ * reloaded.
+ *
+ * This function will never return to the guest that invokes it.
+ *
+ * Note: By convention an exit code of zero denotes a successful exit by
+ *       the guest code.  A non-zero exit code denotes a guest specific
+ *       error indication.
+ *
+ */
+#define HV_FAST_MACH_EXIT		0x00
+
+#ifndef __ASSEMBLY__
+extern void sun4v_mach_exit(unsigned long exit_code);
+#endif
+
+/* Domain services.  */
+
+/* mach_desc()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MACH_DESC
+ * ARG0:	buffer
+ * ARG1:	length
+ * RET0:	status
+ * RET1:	length
+ * ERRORS:	HV_EBADALIGN	Buffer is badly aligned
+ *		HV_ENORADDR	Buffer is to an illegal real address.
+ *		HV_EINVAL	Buffer length is too small for complete
+ *				machine description.
+ *
+ * Copy the most current machine description into the buffer indicated
+ * by the real address in ARG0.  The buffer provided must be 16 byte
+ * aligned.  Upon success or HV_EINVAL, this service returns the
+ * actual size of the machine description in the RET1 return value.
+ *
+ * Note: A method of determining the appropriate buffer size for the
+ *       machine description is to first call this service with a buffer
+ *       length of 0 bytes.
+ */
+#define HV_FAST_MACH_DESC		0x01
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mach_desc(unsigned long buffer_pa,
+				     unsigned long buf_len,
+				     unsigned long *real_buf_len);
+#endif
+
+/* mach_sir()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MACH_SIR
+ * ERRORS:	This service does not return.
+ *
+ * Perform a software initiated reset of the virtual machine domain.
+ * All CPUs are captured as soon as possible, all hardware devices are
+ * returned to the entry default state, and the domain is restarted at
+ * the SIR (trap type 0x04) real trap table (RTBA) entry point on one
+ * of the CPUs.  The single CPU restarted is selected as determined by
+ * platform specific policy.  Memory is preserved across this
+ * operation.
+ */
+#define HV_FAST_MACH_SIR		0x02
+
+#ifndef __ASSEMBLY__
+extern void sun4v_mach_sir(void);
+#endif
+
+/* mach_set_watchdog()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MACH_SET_WATCHDOG
+ * ARG0:	timeout in milliseconds
+ * RET0:	status
+ * RET1:	time remaining in milliseconds
+ *
+ * A guest uses this API to set a watchdog timer.  Once the gues has set
+ * the timer, it must call the timer service again either to disable or
+ * postpone the expiration.  If the timer expires before being reset or
+ * disabled, then the hypervisor take a platform specific action leading
+ * to guest termination within a bounded time period.  The platform action
+ * may include recovery actions such as reporting the expiration to a
+ * Service Processor, and/or automatically restarting the gues.
+ *
+ * The 'timeout' parameter is specified in milliseconds, however the
+ * implementated granularity is given by the 'watchdog-resolution'
+ * property in the 'platform' node of the guest's machine description.
+ * The largest allowed timeout value is specified by the
+ * 'watchdog-max-timeout' property of the 'platform' node.
+ *
+ * If the 'timeout' argument is not zero, the watchdog timer is set to
+ * expire after a minimum of 'timeout' milliseconds.
+ *
+ * If the 'timeout' argument is zero, the watchdog timer is disabled.
+ *
+ * If the 'timeout' value exceeds the value of the 'max-watchdog-timeout'
+ * property, the hypervisor leaves the watchdog timer state unchanged,
+ * and returns a status of EINVAL.
+ *
+ * The 'time remaining' return value is valid regardless of whether the
+ * return status is EOK or EINVAL.  A non-zero return value indicates the
+ * number of milliseconds that were remaining until the timer was to expire.
+ * If less than one millisecond remains, the return value is '1'.  If the
+ * watchdog timer was disabled at the time of the call, the return value is
+ * zero.
+ *
+ * If the hypervisor cannot support the exact timeout value requested, but
+ * can support a larger timeout value, the hypervisor may round the actual
+ * timeout to a value larger than the requested timeout, consequently the
+ * 'time remaining' return value may be larger than the previously requested
+ * timeout value.
+ *
+ * Any guest OS debugger should be aware that the watchdog service may be in
+ * use.  Consequently, it is recommended that the watchdog service is
+ * disabled upon debugger entry (e.g. reaching a breakpoint), and then
+ * re-enabled upon returning to normal execution.  The API has been designed
+ * with this in mind, and the 'time remaining' result of the disable call may
+ * be used directly as the timeout argument of the re-enable call.
+ */
+#define HV_FAST_MACH_SET_WATCHDOG	0x05
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mach_set_watchdog(unsigned long timeout,
+					     unsigned long *orig_timeout);
+#endif
+
+/* CPU services.
+ *
+ * CPUs represent devices that can execute software threads.  A single
+ * chip that contains multiple cores or strands is represented as
+ * multiple CPUs with unique CPU identifiers.  CPUs are exported to
+ * OBP via the machine description (and to the OS via the OBP device
+ * tree).  CPUs are always in one of three states: stopped, running,
+ * or error.
+ *
+ * A CPU ID is a pre-assigned 16-bit value that uniquely identifies a
+ * CPU within a logical domain.  Operations that are to be performed
+ * on multiple CPUs specify them via a CPU list.  A CPU list is an
+ * array in real memory, of which each 16-bit word is a CPU ID.  CPU
+ * lists are passed through the API as two arguments.  The first is
+ * the number of entries (16-bit words) in the CPU list, and the
+ * second is the (real address) pointer to the CPU ID list.
+ */
+
+/* cpu_start()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_START
+ * ARG0:	CPU ID
+ * ARG1:	PC
+ * ARG2:	RTBA
+ * ARG3:	target ARG0
+ * RET0:	status
+ * ERRORS:	ENOCPU		Invalid CPU ID
+ *		EINVAL		Target CPU ID is not in the stopped state
+ *		ENORADDR	Invalid PC or RTBA real address
+ *		EBADALIGN	Unaligned PC or unaligned RTBA
+ *		EWOULDBLOCK	Starting resources are not available
+ *
+ * Start CPU with given CPU ID with PC in %pc and with a real trap
+ * base address value of RTBA.  The indicated CPU must be in the
+ * stopped state.  The supplied RTBA must be aligned on a 256 byte
+ * boundary.  On successful completion, the specified CPU will be in
+ * the running state and will be supplied with "target ARG0" in %o0
+ * and RTBA in %tba.
+ */
+#define HV_FAST_CPU_START		0x10
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_start(unsigned long cpuid,
+				     unsigned long pc,
+				     unsigned long rtba,
+				     unsigned long arg0);
+#endif
+
+/* cpu_stop()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_STOP
+ * ARG0:	CPU ID
+ * RET0:	status
+ * ERRORS:	ENOCPU		Invalid CPU ID
+ *		EINVAL		Target CPU ID is the current cpu
+ *		EINVAL		Target CPU ID is not in the running state
+ *		EWOULDBLOCK	Stopping resources are not available
+ *		ENOTSUPPORTED	Not supported on this platform
+ *
+ * The specified CPU is stopped.  The indicated CPU must be in the
+ * running state.  On completion, it will be in the stopped state.  It
+ * is not legal to stop the current CPU.
+ *
+ * Note: As this service cannot be used to stop the current cpu, this service
+ *       may not be used to stop the last running CPU in a domain.  To stop
+ *       and exit a running domain, a guest must use the mach_exit() service.
+ */
+#define HV_FAST_CPU_STOP		0x11
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_stop(unsigned long cpuid);
+#endif
+
+/* cpu_yield()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_YIELD
+ * RET0:	status
+ * ERRORS:	No possible error.
+ *
+ * Suspend execution on the current CPU.  Execution will resume when
+ * an interrupt (device, %stick_compare, or cross-call) is targeted to
+ * the CPU.  On some CPUs, this API may be used by the hypervisor to
+ * save power by disabling hardware strands.
+ */
+#define HV_FAST_CPU_YIELD		0x12
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_yield(void);
+#endif
+
+/* cpu_qconf()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_QCONF
+ * ARG0:	queue
+ * ARG1:	base real address
+ * ARG2:	number of entries
+ * RET0:	status
+ * ERRORS:	ENORADDR	Invalid base real address
+ *		EINVAL		Invalid queue or number of entries is less
+ *				than 2 or too large.
+ *		EBADALIGN	Base real address is not correctly aligned
+ *				for size.
+ *
+ * Configure the given queue to be placed at the given base real
+ * address, with the given number of entries.  The number of entries
+ * must be a power of 2.  The base real address must be aligned
+ * exactly to match the queue size.  Each queue entry is 64 bytes
+ * long, so for example a 32 entry queue must be aligned on a 2048
+ * byte real address boundary.
+ *
+ * The specified queue is unconfigured if the number of entries is given
+ * as zero.
+ *
+ * For the current version of this API service, the argument queue is defined
+ * as follows:
+ *
+ *	queue		description
+ *	-----		-------------------------
+ *	0x3c		cpu mondo queue
+ *	0x3d		device mondo queue
+ *	0x3e		resumable error queue
+ *	0x3f		non-resumable error queue
+ *
+ * Note: The maximum number of entries for each queue for a specific cpu may
+ *       be determined from the machine description.
+ */
+#define HV_FAST_CPU_QCONF		0x14
+#define  HV_CPU_QUEUE_CPU_MONDO		 0x3c
+#define  HV_CPU_QUEUE_DEVICE_MONDO	 0x3d
+#define  HV_CPU_QUEUE_RES_ERROR		 0x3e
+#define  HV_CPU_QUEUE_NONRES_ERROR	 0x3f
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_qconf(unsigned long type,
+				     unsigned long queue_paddr,
+				     unsigned long num_queue_entries);
+#endif
+
+/* cpu_qinfo()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_QINFO
+ * ARG0:	queue
+ * RET0:	status
+ * RET1:	base real address
+ * RET1:	number of entries
+ * ERRORS:	EINVAL		Invalid queue
+ *
+ * Return the configuration info for the given queue.  The base real
+ * address and number of entries of the defined queue are returned.
+ * The queue argument values are the same as for cpu_qconf() above.
+ *
+ * If the specified queue is a valid queue number, but no queue has
+ * been defined, the number of entries will be set to zero and the
+ * base real address returned is undefined.
+ */
+#define HV_FAST_CPU_QINFO		0x15
+
+/* cpu_mondo_send()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_MONDO_SEND
+ * ARG0-1:	CPU list
+ * ARG2:	data real address
+ * RET0:	status
+ * ERRORS:	EBADALIGN	Mondo data is not 64-byte aligned or CPU list
+ *				is not 2-byte aligned.
+ *		ENORADDR	Invalid data mondo address, or invalid cpu list
+ *				address.
+ *		ENOCPU		Invalid cpu in CPU list
+ *		EWOULDBLOCK	Some or all of the listed CPUs did not receive
+ *				the mondo
+ *		ECPUERROR	One or more of the listed CPUs are in error
+ *				state, use HV_FAST_CPU_STATE to see which ones
+ *		EINVAL		CPU list includes caller's CPU ID
+ *
+ * Send a mondo interrupt to the CPUs in the given CPU list with the
+ * 64-bytes at the given data real address.  The data must be 64-byte
+ * aligned.  The mondo data will be delivered to the cpu_mondo queues
+ * of the recipient CPUs.
+ *
+ * In all cases, error or not, the CPUs in the CPU list to which the
+ * mondo has been successfully delivered will be indicated by having
+ * their entry in CPU list updated with the value 0xffff.
+ */
+#define HV_FAST_CPU_MONDO_SEND		0x42
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_mondo_send(unsigned long cpu_count, unsigned long cpu_list_pa, unsigned long mondo_block_pa);
+#endif
+
+/* cpu_myid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_MYID
+ * RET0:	status
+ * RET1:	CPU ID
+ * ERRORS:	No errors defined.
+ *
+ * Return the hypervisor ID handle for the current CPU.  Use by a
+ * virtual CPU to discover it's own identity.
+ */
+#define HV_FAST_CPU_MYID		0x16
+
+/* cpu_state()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_STATE
+ * ARG0:	CPU ID
+ * RET0:	status
+ * RET1:	state
+ * ERRORS:	ENOCPU		Invalid CPU ID
+ *
+ * Retrieve the current state of the CPU with the given CPU ID.
+ */
+#define HV_FAST_CPU_STATE		0x17
+#define  HV_CPU_STATE_STOPPED		 0x01
+#define  HV_CPU_STATE_RUNNING		 0x02
+#define  HV_CPU_STATE_ERROR		 0x03
+
+#ifndef __ASSEMBLY__
+extern long sun4v_cpu_state(unsigned long cpuid);
+#endif
+
+/* cpu_set_rtba()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_SET_RTBA
+ * ARG0:	RTBA
+ * RET0:	status
+ * RET1:	previous RTBA
+ * ERRORS:	ENORADDR	Invalid RTBA real address
+ *		EBADALIGN	RTBA is incorrectly aligned for a trap table
+ *
+ * Set the real trap base address of the local cpu to the given RTBA.
+ * The supplied RTBA must be aligned on a 256 byte boundary.  Upon
+ * success the previous value of the RTBA is returned in RET1.
+ *
+ * Note: This service does not affect %tba
+ */
+#define HV_FAST_CPU_SET_RTBA		0x18
+
+/* cpu_set_rtba()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_GET_RTBA
+ * RET0:	status
+ * RET1:	previous RTBA
+ * ERRORS:	No possible error.
+ *
+ * Returns the current value of RTBA in RET1.
+ */
+#define HV_FAST_CPU_GET_RTBA		0x19
+
+/* MMU services.
+ *
+ * Layout of a TSB description for mmu_tsb_ctx{,non}0() calls.
+ */
+#ifndef __ASSEMBLY__
+struct hv_tsb_descr {
+	unsigned short		pgsz_idx;
+	unsigned short		assoc;
+	unsigned int		num_ttes;	/* in TTEs */
+	unsigned int		ctx_idx;
+	unsigned int		pgsz_mask;
+	unsigned long		tsb_base;
+	unsigned long		resv;
+};
+#endif
+#define HV_TSB_DESCR_PGSZ_IDX_OFFSET	0x00
+#define HV_TSB_DESCR_ASSOC_OFFSET	0x02
+#define HV_TSB_DESCR_NUM_TTES_OFFSET	0x04
+#define HV_TSB_DESCR_CTX_IDX_OFFSET	0x08
+#define HV_TSB_DESCR_PGSZ_MASK_OFFSET	0x0c
+#define HV_TSB_DESCR_TSB_BASE_OFFSET	0x10
+#define HV_TSB_DESCR_RESV_OFFSET	0x18
+
+/* Page size bitmask.  */
+#define HV_PGSZ_MASK_8K			(1 << 0)
+#define HV_PGSZ_MASK_64K		(1 << 1)
+#define HV_PGSZ_MASK_512K		(1 << 2)
+#define HV_PGSZ_MASK_4MB		(1 << 3)
+#define HV_PGSZ_MASK_32MB		(1 << 4)
+#define HV_PGSZ_MASK_256MB		(1 << 5)
+#define HV_PGSZ_MASK_2GB		(1 << 6)
+#define HV_PGSZ_MASK_16GB		(1 << 7)
+
+/* Page size index.  The value given in the TSB descriptor must correspond
+ * to the smallest page size specified in the pgsz_mask page size bitmask.
+ */
+#define HV_PGSZ_IDX_8K			0
+#define HV_PGSZ_IDX_64K			1
+#define HV_PGSZ_IDX_512K		2
+#define HV_PGSZ_IDX_4MB			3
+#define HV_PGSZ_IDX_32MB		4
+#define HV_PGSZ_IDX_256MB		5
+#define HV_PGSZ_IDX_2GB			6
+#define HV_PGSZ_IDX_16GB		7
+
+/* MMU fault status area.
+ *
+ * MMU related faults have their status and fault address information
+ * placed into a memory region made available by privileged code.  Each
+ * virtual processor must make a mmu_fault_area_conf() call to tell the
+ * hypervisor where that processor's fault status should be stored.
+ *
+ * The fault status block is a multiple of 64-bytes and must be aligned
+ * on a 64-byte boundary.
+ */
+#ifndef __ASSEMBLY__
+struct hv_fault_status {
+	unsigned long		i_fault_type;
+	unsigned long		i_fault_addr;
+	unsigned long		i_fault_ctx;
+	unsigned long		i_reserved[5];
+	unsigned long		d_fault_type;
+	unsigned long		d_fault_addr;
+	unsigned long		d_fault_ctx;
+	unsigned long		d_reserved[5];
+};
+#endif
+#define HV_FAULT_I_TYPE_OFFSET	0x00
+#define HV_FAULT_I_ADDR_OFFSET	0x08
+#define HV_FAULT_I_CTX_OFFSET	0x10
+#define HV_FAULT_D_TYPE_OFFSET	0x40
+#define HV_FAULT_D_ADDR_OFFSET	0x48
+#define HV_FAULT_D_CTX_OFFSET	0x50
+
+#define HV_FAULT_TYPE_FAST_MISS	1
+#define HV_FAULT_TYPE_FAST_PROT	2
+#define HV_FAULT_TYPE_MMU_MISS	3
+#define HV_FAULT_TYPE_INV_RA	4
+#define HV_FAULT_TYPE_PRIV_VIOL	5
+#define HV_FAULT_TYPE_PROT_VIOL	6
+#define HV_FAULT_TYPE_NFO	7
+#define HV_FAULT_TYPE_NFO_SEFF	8
+#define HV_FAULT_TYPE_INV_VA	9
+#define HV_FAULT_TYPE_INV_ASI	10
+#define HV_FAULT_TYPE_NC_ATOMIC	11
+#define HV_FAULT_TYPE_PRIV_ACT	12
+#define HV_FAULT_TYPE_RESV1	13
+#define HV_FAULT_TYPE_UNALIGNED	14
+#define HV_FAULT_TYPE_INV_PGSZ	15
+/* Values 16 --> -2 are reserved.  */
+#define HV_FAULT_TYPE_MULTIPLE	-1
+
+/* Flags argument for mmu_{map,unmap}_addr(), mmu_demap_{page,context,all}(),
+ * and mmu_{map,unmap}_perm_addr().
+ */
+#define HV_MMU_DMMU			0x01
+#define HV_MMU_IMMU			0x02
+#define HV_MMU_ALL			(HV_MMU_DMMU | HV_MMU_IMMU)
+
+/* mmu_map_addr()
+ * TRAP:	HV_MMU_MAP_ADDR_TRAP
+ * ARG0:	virtual address
+ * ARG1:	mmu context
+ * ARG2:	TTE
+ * ARG3:	flags (HV_MMU_{IMMU,DMMU})
+ * ERRORS:	EINVAL		Invalid virtual address, mmu context, or flags
+ *		EBADPGSZ	Invalid page size value
+ *		ENORADDR	Invalid real address in TTE
+ *
+ * Create a non-permanent mapping using the given TTE, virtual
+ * address, and mmu context.  The flags argument determines which
+ * (data, or instruction, or both) TLB the mapping gets loaded into.
+ *
+ * The behavior is undefined if the valid bit is clear in the TTE.
+ *
+ * Note: This API call is for privileged code to specify temporary translation
+ *       mappings without the need to create and manage a TSB.
+ */
+
+/* mmu_unmap_addr()
+ * TRAP:	HV_MMU_UNMAP_ADDR_TRAP
+ * ARG0:	virtual address
+ * ARG1:	mmu context
+ * ARG2:	flags (HV_MMU_{IMMU,DMMU})
+ * ERRORS:	EINVAL		Invalid virtual address, mmu context, or flags
+ *
+ * Demaps the given virtual address in the given mmu context on this
+ * CPU.  This function is intended to be used to demap pages mapped
+ * with mmu_map_addr.  This service is equivalent to invoking
+ * mmu_demap_page() with only the current CPU in the CPU list. The
+ * flags argument determines which (data, or instruction, or both) TLB
+ * the mapping gets unmapped from.
+ *
+ * Attempting to perform an unmap operation for a previously defined
+ * permanent mapping will have undefined results.
+ */
+
+/* mmu_tsb_ctx0()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_TSB_CTX0
+ * ARG0:	number of TSB descriptions
+ * ARG1:	TSB descriptions pointer
+ * RET0:	status
+ * ERRORS:	ENORADDR		Invalid TSB descriptions pointer or
+ *					TSB base within a descriptor
+ *		EBADALIGN		TSB descriptions pointer is not aligned
+ *					to an 8-byte boundary, or TSB base
+ *					within a descriptor is not aligned for
+ *					the given TSB size
+ *		EBADPGSZ		Invalid page size in a TSB descriptor
+ *		EBADTSB			Invalid associativity or size in a TSB
+ *					descriptor
+ *		EINVAL			Invalid number of TSB descriptions, or
+ *					invalid context index in a TSB
+ *					descriptor, or index page size not
+ *					equal to smallest page size in page
+ *					size bitmask field.
+ *
+ * Configures the TSBs for the current CPU for virtual addresses with
+ * context zero.  The TSB descriptions pointer is a pointer to an
+ * array of the given number of TSB descriptions.
+ *
+ * Note: The maximum number of TSBs available to a virtual CPU is given by the
+ *       mmu-max-#tsbs property of the cpu's corresponding "cpu" node in the
+ *       machine description.
+ */
+#define HV_FAST_MMU_TSB_CTX0		0x20
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mmu_tsb_ctx0(unsigned long num_descriptions,
+					unsigned long tsb_desc_ra);
+#endif
+
+/* mmu_tsb_ctxnon0()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_TSB_CTXNON0
+ * ARG0:	number of TSB descriptions
+ * ARG1:	TSB descriptions pointer
+ * RET0:	status
+ * ERRORS:	Same as for mmu_tsb_ctx0() above.
+ *
+ * Configures the TSBs for the current CPU for virtual addresses with
+ * non-zero contexts.  The TSB descriptions pointer is a pointer to an
+ * array of the given number of TSB descriptions.
+ *
+ * Note: A maximum of 16 TSBs may be specified in the TSB description list.
+ */
+#define HV_FAST_MMU_TSB_CTXNON0		0x21
+
+/* mmu_demap_page()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_DEMAP_PAGE
+ * ARG0:	reserved, must be zero
+ * ARG1:	reserved, must be zero
+ * ARG2:	virtual address
+ * ARG3:	mmu context
+ * ARG4:	flags (HV_MMU_{IMMU,DMMU})
+ * RET0:	status
+ * ERRORS:	EINVAL			Invalid virutal address, context, or
+ *					flags value
+ *		ENOTSUPPORTED		ARG0 or ARG1 is non-zero
+ *
+ * Demaps any page mapping of the given virtual address in the given
+ * mmu context for the current virtual CPU.  Any virtually tagged
+ * caches are guaranteed to be kept consistent.  The flags argument
+ * determines which TLB (instruction, or data, or both) participate in
+ * the operation.
+ *
+ * ARG0 and ARG1 are both reserved and must be set to zero.
+ */
+#define HV_FAST_MMU_DEMAP_PAGE		0x22
+
+/* mmu_demap_ctx()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_DEMAP_CTX
+ * ARG0:	reserved, must be zero
+ * ARG1:	reserved, must be zero
+ * ARG2:	mmu context
+ * ARG3:	flags (HV_MMU_{IMMU,DMMU})
+ * RET0:	status
+ * ERRORS:	EINVAL			Invalid context or flags value
+ *		ENOTSUPPORTED		ARG0 or ARG1 is non-zero
+ *
+ * Demaps all non-permanent virtual page mappings previously specified
+ * for the given context for the current virtual CPU.  Any virtual
+ * tagged caches are guaranteed to be kept consistent.  The flags
+ * argument determines which TLB (instruction, or data, or both)
+ * participate in the operation.
+ *
+ * ARG0 and ARG1 are both reserved and must be set to zero.
+ */
+#define HV_FAST_MMU_DEMAP_CTX		0x23
+
+/* mmu_demap_all()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_DEMAP_ALL
+ * ARG0:	reserved, must be zero
+ * ARG1:	reserved, must be zero
+ * ARG2:	flags (HV_MMU_{IMMU,DMMU})
+ * RET0:	status
+ * ERRORS:	EINVAL			Invalid flags value
+ *		ENOTSUPPORTED		ARG0 or ARG1 is non-zero
+ *
+ * Demaps all non-permanent virtual page mappings previously specified
+ * for the current virtual CPU.  Any virtual tagged caches are
+ * guaranteed to be kept consistent.  The flags argument determines
+ * which TLB (instruction, or data, or both) participate in the
+ * operation.
+ *
+ * ARG0 and ARG1 are both reserved and must be set to zero.
+ */
+#define HV_FAST_MMU_DEMAP_ALL		0x24
+
+#ifndef __ASSEMBLY__
+extern void sun4v_mmu_demap_all(void);
+#endif
+
+/* mmu_map_perm_addr()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_MAP_PERM_ADDR
+ * ARG0:	virtual address
+ * ARG1:	reserved, must be zero
+ * ARG2:	TTE
+ * ARG3:	flags (HV_MMU_{IMMU,DMMU})
+ * RET0:	status
+ * ERRORS:	EINVAL			Invalid virutal address or flags value
+ *		EBADPGSZ		Invalid page size value
+ *		ENORADDR		Invalid real address in TTE
+ *		ETOOMANY		Too many mappings (max of 8 reached)
+ *
+ * Create a permanent mapping using the given TTE and virtual address
+ * for context 0 on the calling virtual CPU.  A maximum of 8 such
+ * permanent mappings may be specified by privileged code.  Mappings
+ * may be removed with mmu_unmap_perm_addr().
+ *
+ * The behavior is undefined if a TTE with the valid bit clear is given.
+ *
+ * Note: This call is used to specify address space mappings for which
+ *       privileged code does not expect to receive misses.  For example,
+ *       this mechanism can be used to map kernel nucleus code and data.
+ */
+#define HV_FAST_MMU_MAP_PERM_ADDR	0x25
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mmu_map_perm_addr(unsigned long vaddr,
+					     unsigned long set_to_zero,
+					     unsigned long tte,
+					     unsigned long flags);
+#endif
+
+/* mmu_fault_area_conf()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_FAULT_AREA_CONF
+ * ARG0:	real address
+ * RET0:	status
+ * RET1:	previous mmu fault area real address
+ * ERRORS:	ENORADDR		Invalid real address
+ *		EBADALIGN		Invalid alignment for fault area
+ *
+ * Configure the MMU fault status area for the calling CPU.  A 64-byte
+ * aligned real address specifies where MMU fault status information
+ * is placed.  The return value is the previously specified area, or 0
+ * for the first invocation.  Specifying a fault area at real address
+ * 0 is not allowed.
+ */
+#define HV_FAST_MMU_FAULT_AREA_CONF	0x26
+
+/* mmu_enable()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_ENABLE
+ * ARG0:	enable flag
+ * ARG1:	return target address
+ * RET0:	status
+ * ERRORS:	ENORADDR		Invalid real address when disabling
+ *					translation.
+ *		EBADALIGN		The return target address is not
+ *					aligned to an instruction.
+ *		EINVAL			The enable flag request the current
+ *					operating mode (e.g. disable if already
+ *					disabled)
+ *
+ * Enable or disable virtual address translation for the calling CPU
+ * within the virtual machine domain.  If the enable flag is zero,
+ * translation is disabled, any non-zero value will enable
+ * translation.
+ *
+ * When this function returns, the newly selected translation mode
+ * will be active.  If the mmu is being enabled, then the return
+ * target address is a virtual address else it is a real address.
+ *
+ * Upon successful completion, control will be returned to the given
+ * return target address (ie. the cpu will jump to that address).  On
+ * failure, the previous mmu mode remains and the trap simply returns
+ * as normal with the appropriate error code in RET0.
+ */
+#define HV_FAST_MMU_ENABLE		0x27
+
+/* mmu_unmap_perm_addr()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_UNMAP_PERM_ADDR
+ * ARG0:	virtual address
+ * ARG1:	reserved, must be zero
+ * ARG2:	flags (HV_MMU_{IMMU,DMMU})
+ * RET0:	status
+ * ERRORS:	EINVAL			Invalid virutal address or flags value
+ *		ENOMAP			Specified mapping was not found
+ *
+ * Demaps any permanent page mapping (established via
+ * mmu_map_perm_addr()) at the given virtual address for context 0 on
+ * the current virtual CPU.  Any virtual tagged caches are guaranteed
+ * to be kept consistent.
+ */
+#define HV_FAST_MMU_UNMAP_PERM_ADDR	0x28
+
+/* mmu_tsb_ctx0_info()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_TSB_CTX0_INFO
+ * ARG0:	max TSBs
+ * ARG1:	buffer pointer
+ * RET0:	status
+ * RET1:	number of TSBs
+ * ERRORS:	EINVAL			Supplied buffer is too small
+ *		EBADALIGN		The buffer pointer is badly aligned
+ *		ENORADDR		Invalid real address for buffer pointer
+ *
+ * Return the TSB configuration as previous defined by mmu_tsb_ctx0()
+ * into the provided buffer.  The size of the buffer is given in ARG1
+ * in terms of the number of TSB description entries.
+ *
+ * Upon return, RET1 always contains the number of TSB descriptions
+ * previously configured.  If zero TSBs were configured, EOK is
+ * returned with RET1 containing 0.
+ */
+#define HV_FAST_MMU_TSB_CTX0_INFO	0x29
+
+/* mmu_tsb_ctxnon0_info()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_TSB_CTXNON0_INFO
+ * ARG0:	max TSBs
+ * ARG1:	buffer pointer
+ * RET0:	status
+ * RET1:	number of TSBs
+ * ERRORS:	EINVAL			Supplied buffer is too small
+ *		EBADALIGN		The buffer pointer is badly aligned
+ *		ENORADDR		Invalid real address for buffer pointer
+ *
+ * Return the TSB configuration as previous defined by
+ * mmu_tsb_ctxnon0() into the provided buffer.  The size of the buffer
+ * is given in ARG1 in terms of the number of TSB description entries.
+ *
+ * Upon return, RET1 always contains the number of TSB descriptions
+ * previously configured.  If zero TSBs were configured, EOK is
+ * returned with RET1 containing 0.
+ */
+#define HV_FAST_MMU_TSB_CTXNON0_INFO	0x2a
+
+/* mmu_fault_area_info()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_FAULT_AREA_INFO
+ * RET0:	status
+ * RET1:	fault area real address
+ * ERRORS:	No errors defined.
+ *
+ * Return the currently defined MMU fault status area for the current
+ * CPU.  The real address of the fault status area is returned in
+ * RET1, or 0 is returned in RET1 if no fault status area is defined.
+ *
+ * Note: mmu_fault_area_conf() may be called with the return value (RET1)
+ *       from this service if there is a need to save and restore the fault
+ *	 area for a cpu.
+ */
+#define HV_FAST_MMU_FAULT_AREA_INFO	0x2b
+
+/* Cache and Memory services. */
+
+/* mem_scrub()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MEM_SCRUB
+ * ARG0:	real address
+ * ARG1:	length
+ * RET0:	status
+ * RET1:	length scrubbed
+ * ERRORS:	ENORADDR	Invalid real address
+ *		EBADALIGN	Start address or length are not correctly
+ *				aligned
+ *		EINVAL		Length is zero
+ *
+ * Zero the memory contents in the range real address to real address
+ * plus length minus 1.  Also, valid ECC will be generated for that
+ * memory address range.  Scrubbing is started at the given real
+ * address, but may not scrub the entire given length.  The actual
+ * length scrubbed will be returned in RET1.
+ *
+ * The real address and length must be aligned on an 8K boundary, or
+ * contain the start address and length from a sun4v error report.
+ *
+ * Note: There are two uses for this function.  The first use is to block clear
+ *       and initialize memory and the second is to scrub an u ncorrectable
+ *       error reported via a resumable or non-resumable trap.  The second
+ *       use requires the arguments to be equal to the real address and length
+ *       provided in a sun4v memory error report.
+ */
+#define HV_FAST_MEM_SCRUB		0x31
+
+/* mem_sync()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MEM_SYNC
+ * ARG0:	real address
+ * ARG1:	length
+ * RET0:	status
+ * RET1:	length synced
+ * ERRORS:	ENORADDR	Invalid real address
+ *		EBADALIGN	Start address or length are not correctly
+ *				aligned
+ *		EINVAL		Length is zero
+ *
+ * Force the next access within the real address to real address plus
+ * length minus 1 to be fetches from main system memory.  Less than
+ * the given length may be synced, the actual amount synced is
+ * returned in RET1.  The real address and length must be aligned on
+ * an 8K boundary.
+ */
+#define HV_FAST_MEM_SYNC		0x32
+
+/* Time of day services.
+ *
+ * The hypervisor maintains the time of day on a per-domain basis.
+ * Changing the time of day in one domain does not affect the time of
+ * day on any other domain.
+ *
+ * Time is described by a single unsigned 64-bit word which is the
+ * number of seconds since the UNIX Epoch (00:00:00 UTC, January 1,
+ * 1970).
+ */
+
+/* tod_get()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_TOD_GET
+ * RET0:	status
+ * RET1:	TOD
+ * ERRORS:	EWOULDBLOCK	TOD resource is temporarily unavailable
+ *		ENOTSUPPORTED	If TOD not supported on this platform
+ *
+ * Return the current time of day.  May block if TOD access is
+ * temporarily not possible.
+ */
+#define HV_FAST_TOD_GET			0x50
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_tod_get(unsigned long *time);
+#endif
+
+/* tod_set()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_TOD_SET
+ * ARG0:	TOD
+ * RET0:	status
+ * ERRORS:	EWOULDBLOCK	TOD resource is temporarily unavailable
+ *		ENOTSUPPORTED	If TOD not supported on this platform
+ *
+ * The current time of day is set to the value specified in ARG0.  May
+ * block if TOD access is temporarily not possible.
+ */
+#define HV_FAST_TOD_SET			0x51
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_tod_set(unsigned long time);
+#endif
+
+/* Console services */
+
+/* con_getchar()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CONS_GETCHAR
+ * RET0:	status
+ * RET1:	character
+ * ERRORS:	EWOULDBLOCK	No character available.
+ *
+ * Returns a character from the console device.  If no character is
+ * available then an EWOULDBLOCK error is returned.  If a character is
+ * available, then the returned status is EOK and the character value
+ * is in RET1.
+ *
+ * A virtual BREAK is represented by the 64-bit value -1.
+ *
+ * A virtual HUP signal is represented by the 64-bit value -2.
+ */
+#define HV_FAST_CONS_GETCHAR		0x60
+
+/* con_putchar()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CONS_PUTCHAR
+ * ARG0:	character
+ * RET0:	status
+ * ERRORS:	EINVAL		Illegal character
+ *		EWOULDBLOCK	Output buffer currently full, would block
+ *
+ * Send a character to the console device.  Only character values
+ * between 0 and 255 may be used.  Values outside this range are
+ * invalid except for the 64-bit value -1 which is used to send a
+ * virtual BREAK.
+ */
+#define HV_FAST_CONS_PUTCHAR		0x61
+
+/* con_read()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CONS_READ
+ * ARG0:	buffer real address
+ * ARG1:	buffer size in bytes
+ * RET0:	status
+ * RET1:	bytes read or BREAK or HUP
+ * ERRORS:	EWOULDBLOCK	No character available.
+ *
+ * Reads characters into a buffer from the console device.  If no
+ * character is available then an EWOULDBLOCK error is returned.
+ * If a character is available, then the returned status is EOK
+ * and the number of bytes read into the given buffer is provided
+ * in RET1.
+ *
+ * A virtual BREAK is represented by the 64-bit RET1 value -1.
+ *
+ * A virtual HUP signal is represented by the 64-bit RET1 value -2.
+ *
+ * If BREAK or HUP are indicated, no bytes were read into buffer.
+ */
+#define HV_FAST_CONS_READ		0x62
+
+/* con_write()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CONS_WRITE
+ * ARG0:	buffer real address
+ * ARG1:	buffer size in bytes
+ * RET0:	status
+ * RET1:	bytes written
+ * ERRORS:	EWOULDBLOCK	Output buffer currently full, would block
+ *
+ * Send a characters in buffer to the console device.  Breaks must be
+ * sent using con_putchar().
+ */
+#define HV_FAST_CONS_WRITE		0x63
+
+#ifndef __ASSEMBLY__
+extern long sun4v_con_getchar(long *status);
+extern long sun4v_con_putchar(long c);
+extern long sun4v_con_read(unsigned long buffer,
+			   unsigned long size,
+			   unsigned long *bytes_read);
+extern unsigned long sun4v_con_write(unsigned long buffer,
+				     unsigned long size,
+				     unsigned long *bytes_written);
+#endif
+
+/* mach_set_soft_state()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MACH_SET_SOFT_STATE
+ * ARG0:	software state
+ * ARG1:	software state description pointer
+ * RET0:	status
+ * ERRORS:	EINVAL		software state not valid or software state
+ *				description is not NULL terminated
+ *		ENORADDR	software state description pointer is not a
+ *				valid real address
+ *		EBADALIGNED	software state description is not correctly
+ *				aligned
+ *
+ * This allows the guest to report it's soft state to the hypervisor.  There
+ * are two primary components to this state.  The first part states whether
+ * the guest software is running or not.  The second containts optional
+ * details specific to the software.
+ *
+ * The software state argument is defined below in HV_SOFT_STATE_*, and
+ * indicates whether the guest is operating normally or in a transitional
+ * state.
+ *
+ * The software state description argument is a real address of a data buffer
+ * of size 32-bytes aligned on a 32-byte boundary.  It is treated as a NULL
+ * terminated 7-bit ASCII string of up to 31 characters not including the
+ * NULL termination.
+ */
+#define HV_FAST_MACH_SET_SOFT_STATE	0x70
+#define  HV_SOFT_STATE_NORMAL		 0x01
+#define  HV_SOFT_STATE_TRANSITION	 0x02
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mach_set_soft_state(unsigned long soft_state,
+					       unsigned long msg_string_ra);
+#endif
+
+/* mach_get_soft_state()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MACH_GET_SOFT_STATE
+ * ARG0:	software state description pointer
+ * RET0:	status
+ * RET1:	software state
+ * ERRORS:	ENORADDR	software state description pointer is not a
+ *				valid real address
+ *		EBADALIGNED	software state description is not correctly
+ *				aligned
+ *
+ * Retrieve the current value of the guest's software state.  The rules
+ * for the software state pointer are the same as for mach_set_soft_state()
+ * above.
+ */
+#define HV_FAST_MACH_GET_SOFT_STATE	0x71
+
+/* svc_send()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_SVC_SEND
+ * ARG0:	service ID
+ * ARG1:	buffer real address
+ * ARG2:	buffer size
+ * RET0:	STATUS
+ * RET1:	sent_bytes
+ *
+ * Be careful, all output registers are clobbered by this operation,
+ * so for example it is not possible to save away a value in %o4
+ * across the trap.
+ */
+#define HV_FAST_SVC_SEND		0x80
+
+/* svc_recv()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_SVC_RECV
+ * ARG0:	service ID
+ * ARG1:	buffer real address
+ * ARG2:	buffer size
+ * RET0:	STATUS
+ * RET1:	recv_bytes
+ *
+ * Be careful, all output registers are clobbered by this operation,
+ * so for example it is not possible to save away a value in %o4
+ * across the trap.
+ */
+#define HV_FAST_SVC_RECV		0x81
+
+/* svc_getstatus()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_SVC_GETSTATUS
+ * ARG0:	service ID
+ * RET0:	STATUS
+ * RET1:	status bits
+ */
+#define HV_FAST_SVC_GETSTATUS		0x82
+
+/* svc_setstatus()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_SVC_SETSTATUS
+ * ARG0:	service ID
+ * ARG1:	bits to set
+ * RET0:	STATUS
+ */
+#define HV_FAST_SVC_SETSTATUS		0x83
+
+/* svc_clrstatus()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_SVC_CLRSTATUS
+ * ARG0:	service ID
+ * ARG1:	bits to clear
+ * RET0:	STATUS
+ */
+#define HV_FAST_SVC_CLRSTATUS		0x84
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_svc_send(unsigned long svc_id,
+				    unsigned long buffer,
+				    unsigned long buffer_size,
+				    unsigned long *sent_bytes);
+extern unsigned long sun4v_svc_recv(unsigned long svc_id,
+				    unsigned long buffer,
+				    unsigned long buffer_size,
+				    unsigned long *recv_bytes);
+extern unsigned long sun4v_svc_getstatus(unsigned long svc_id,
+					 unsigned long *status_bits);
+extern unsigned long sun4v_svc_setstatus(unsigned long svc_id,
+					 unsigned long status_bits);
+extern unsigned long sun4v_svc_clrstatus(unsigned long svc_id,
+					 unsigned long status_bits);
+#endif
+
+/* Trap trace services.
+ *
+ * The hypervisor provides a trap tracing capability for privileged
+ * code running on each virtual CPU.  Privileged code provides a
+ * round-robin trap trace queue within which the hypervisor writes
+ * 64-byte entries detailing hyperprivileged traps taken n behalf of
+ * privileged code.  This is provided as a debugging capability for
+ * privileged code.
+ *
+ * The trap trace control structure is 64-bytes long and placed at the
+ * start (offset 0) of the trap trace buffer, and is described as
+ * follows:
+ */
+#ifndef __ASSEMBLY__
+struct hv_trap_trace_control {
+	unsigned long		head_offset;
+	unsigned long		tail_offset;
+	unsigned long		__reserved[0x30 / sizeof(unsigned long)];
+};
+#endif
+#define HV_TRAP_TRACE_CTRL_HEAD_OFFSET	0x00
+#define HV_TRAP_TRACE_CTRL_TAIL_OFFSET	0x08
+
+/* The head offset is the offset of the most recently completed entry
+ * in the trap-trace buffer.  The tail offset is the offset of the
+ * next entry to be written.  The control structure is owned and
+ * modified by the hypervisor.  A guest may not modify the control
+ * structure contents.  Attempts to do so will result in undefined
+ * behavior for the guest.
+ *
+ * Each trap trace buffer entry is layed out as follows:
+ */
+#ifndef __ASSEMBLY__
+struct hv_trap_trace_entry {
+	unsigned char	type;		/* Hypervisor or guest entry?	*/
+	unsigned char	hpstate;	/* Hyper-privileged state	*/
+	unsigned char	tl;		/* Trap level			*/
+	unsigned char	gl;		/* Global register level	*/
+	unsigned short	tt;		/* Trap type			*/
+	unsigned short	tag;		/* Extended trap identifier	*/
+	unsigned long	tstate;		/* Trap state			*/
+	unsigned long	tick;		/* Tick				*/
+	unsigned long	tpc;		/* Trap PC			*/
+	unsigned long	f1;		/* Entry specific		*/
+	unsigned long	f2;		/* Entry specific		*/
+	unsigned long	f3;		/* Entry specific		*/
+	unsigned long	f4;		/* Entry specific		*/
+};
+#endif
+#define HV_TRAP_TRACE_ENTRY_TYPE	0x00
+#define HV_TRAP_TRACE_ENTRY_HPSTATE	0x01
+#define HV_TRAP_TRACE_ENTRY_TL		0x02
+#define HV_TRAP_TRACE_ENTRY_GL		0x03
+#define HV_TRAP_TRACE_ENTRY_TT		0x04
+#define HV_TRAP_TRACE_ENTRY_TAG		0x06
+#define HV_TRAP_TRACE_ENTRY_TSTATE	0x08
+#define HV_TRAP_TRACE_ENTRY_TICK	0x10
+#define HV_TRAP_TRACE_ENTRY_TPC		0x18
+#define HV_TRAP_TRACE_ENTRY_F1		0x20
+#define HV_TRAP_TRACE_ENTRY_F2		0x28
+#define HV_TRAP_TRACE_ENTRY_F3		0x30
+#define HV_TRAP_TRACE_ENTRY_F4		0x38
+
+/* The type field is encoded as follows.  */
+#define HV_TRAP_TYPE_UNDEF		0x00 /* Entry content undefined     */
+#define HV_TRAP_TYPE_HV			0x01 /* Hypervisor trap entry       */
+#define HV_TRAP_TYPE_GUEST		0xff /* Added via ttrace_addentry() */
+
+/* ttrace_buf_conf()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_TTRACE_BUF_CONF
+ * ARG0:	real address
+ * ARG1:	number of entries
+ * RET0:	status
+ * RET1:	number of entries
+ * ERRORS:	ENORADDR	Invalid real address
+ *		EINVAL		Size is too small
+ *		EBADALIGN	Real address not aligned on 64-byte boundary
+ *
+ * Requests hypervisor trap tracing and declares a virtual CPU's trap
+ * trace buffer to the hypervisor.  The real address supplies the real
+ * base address of the trap trace queue and must be 64-byte aligned.
+ * Specifying a value of 0 for the number of entries disables trap
+ * tracing for the calling virtual CPU.  The buffer allocated must be
+ * sized for a power of two number of 64-byte trap trace entries plus
+ * an initial 64-byte control structure.
+ *
+ * This may be invoked any number of times so that a virtual CPU may
+ * relocate a trap trace buffer or create "snapshots" of information.
+ *
+ * If the real address is illegal or badly aligned, then trap tracing
+ * is disabled and an error is returned.
+ *
+ * Upon failure with EINVAL, this service call returns in RET1 the
+ * minimum number of buffer entries required.  Upon other failures
+ * RET1 is undefined.
+ */
+#define HV_FAST_TTRACE_BUF_CONF		0x90
+
+/* ttrace_buf_info()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_TTRACE_BUF_INFO
+ * RET0:	status
+ * RET1:	real address
+ * RET2:	size
+ * ERRORS:	None defined.
+ *
+ * Returns the size and location of the previously declared trap-trace
+ * buffer.  In the event that no buffer was previously defined, or the
+ * buffer is disabled, this call will return a size of zero bytes.
+ */
+#define HV_FAST_TTRACE_BUF_INFO		0x91
+
+/* ttrace_enable()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_TTRACE_ENABLE
+ * ARG0:	enable
+ * RET0:	status
+ * RET1:	previous enable state
+ * ERRORS:	EINVAL		No trap trace buffer currently defined
+ *
+ * Enable or disable trap tracing, and return the previous enabled
+ * state in RET1.  Future systems may define various flags for the
+ * enable argument (ARG0), for the moment a guest should pass
+ * "(uint64_t) -1" to enable, and "(uint64_t) 0" to disable all
+ * tracing - which will ensure future compatability.
+ */
+#define HV_FAST_TTRACE_ENABLE		0x92
+
+/* ttrace_freeze()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_TTRACE_FREEZE
+ * ARG0:	freeze
+ * RET0:	status
+ * RET1:	previous freeze state
+ * ERRORS:	EINVAL		No trap trace buffer currently defined
+ *
+ * Freeze or unfreeze trap tracing, returning the previous freeze
+ * state in RET1.  A guest should pass a non-zero value to freeze and
+ * a zero value to unfreeze all tracing.  The returned previous state
+ * is 0 for not frozen and 1 for frozen.
+ */
+#define HV_FAST_TTRACE_FREEZE		0x93
+
+/* ttrace_addentry()
+ * TRAP:	HV_TTRACE_ADDENTRY_TRAP
+ * ARG0:	tag (16-bits)
+ * ARG1:	data word 0
+ * ARG2:	data word 1
+ * ARG3:	data word 2
+ * ARG4:	data word 3
+ * RET0:	status
+ * ERRORS:	EINVAL		No trap trace buffer currently defined
+ *
+ * Add an entry to the trap trace buffer.  Upon return only ARG0/RET0
+ * is modified - none of the other registers holding arguments are
+ * volatile across this hypervisor service.
+ */
+
+/* Core dump services.
+ *
+ * Since the hypervisor viraulizes and thus obscures a lot of the
+ * physical machine layout and state, traditional OS crash dumps can
+ * be difficult to diagnose especially when the problem is a
+ * configuration error of some sort.
+ *
+ * The dump services provide an opaque buffer into which the
+ * hypervisor can place it's internal state in order to assist in
+ * debugging such situations.  The contents are opaque and extremely
+ * platform and hypervisor implementation specific.  The guest, during
+ * a core dump, requests that the hypervisor update any information in
+ * the dump buffer in preparation to being dumped as part of the
+ * domain's memory image.
+ */
+
+/* dump_buf_update()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_DUMP_BUF_UPDATE
+ * ARG0:	real address
+ * ARG1:	size
+ * RET0:	status
+ * RET1:	required size of dump buffer
+ * ERRORS:	ENORADDR	Invalid real address
+ *		EBADALIGN	Real address is not aligned on a 64-byte
+ *				boundary
+ *		EINVAL		Size is non-zero but less than minimum size
+ *				required
+ *		ENOTSUPPORTED	Operation not supported on current logical
+ *				domain
+ *
+ * Declare a domain dump buffer to the hypervisor.  The real address
+ * provided for the domain dump buffer must be 64-byte aligned.  The
+ * size specifies the size of the dump buffer and may be larger than
+ * the minimum size specified in the machine description.  The
+ * hypervisor will fill the dump buffer with opaque data.
+ *
+ * Note: A guest may elect to include dump buffer contents as part of a crash
+ *       dump to assist with debugging.  This function may be called any number
+ *       of times so that a guest may relocate a dump buffer, or create
+ *       "snapshots" of any dump-buffer information.  Each call to
+ *       dump_buf_update() atomically declares the new dump buffer to the
+ *       hypervisor.
+ *
+ * A specified size of 0 unconfigures the dump buffer.  If the real
+ * address is illegal or badly aligned, then any currently active dump
+ * buffer is disabled and an error is returned.
+ *
+ * In the event that the call fails with EINVAL, RET1 contains the
+ * minimum size requires by the hypervisor for a valid dump buffer.
+ */
+#define HV_FAST_DUMP_BUF_UPDATE		0x94
+
+/* dump_buf_info()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_DUMP_BUF_INFO
+ * RET0:	status
+ * RET1:	real address of current dump buffer
+ * RET2:	size of current dump buffer
+ * ERRORS:	No errors defined.
+ *
+ * Return the currently configures dump buffer description.  A
+ * returned size of 0 bytes indicates an undefined dump buffer.  In
+ * this case the return address in RET1 is undefined.
+ */
+#define HV_FAST_DUMP_BUF_INFO		0x95
+
+/* Device interrupt services.
+ *
+ * Device interrupts are allocated to system bus bridges by the hypervisor,
+ * and described to OBP in the machine description.  OBP then describes
+ * these interrupts to the OS via properties in the device tree.
+ *
+ * Terminology:
+ *
+ *	cpuid		Unique opaque value which represents a target cpu.
+ *
+ *	devhandle	Device handle.  It uniquely identifies a device, and
+ *			consistes of the lower 28-bits of the hi-cell of the
+ *			first entry of the device's "reg" property in the
+ *			OBP device tree.
+ *
+ *	devino		Device interrupt number.  Specifies the relative
+ *			interrupt number within the device.  The unique
+ *			combination of devhandle and devino are used to
+ *			identify a specific device interrupt.
+ *
+ *			Note: The devino value is the same as the values in the
+ *			      "interrupts" property or "interrupt-map" property
+ *			      in the OBP device tree for that device.
+ *
+ *	sysino		System interrupt number.  A 64-bit unsigned interger
+ *			representing a unique interrupt within a virtual
+ *			machine.
+ *
+ *	intr_state	A flag representing the interrupt state for a given
+ *			sysino.  The state values are defined below.
+ *
+ *	intr_enabled	A flag representing the 'enabled' state for a given
+ *			sysino.  The enable values are defined below.
+ */
+
+#define HV_INTR_STATE_IDLE		0 /* Nothing pending */
+#define HV_INTR_STATE_RECEIVED		1 /* Interrupt received by hardware */
+#define HV_INTR_STATE_DELIVERED		2 /* Interrupt delivered to queue */
+
+#define HV_INTR_DISABLED		0 /* sysino not enabled */
+#define HV_INTR_ENABLED			1 /* sysino enabled */
+
+/* intr_devino_to_sysino()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_INTR_DEVINO2SYSINO
+ * ARG0:	devhandle
+ * ARG1:	devino
+ * RET0:	status
+ * RET1:	sysino
+ * ERRORS:	EINVAL		Invalid devhandle/devino
+ *
+ * Converts a device specific interrupt number of the given
+ * devhandle/devino into a system specific ino (sysino).
+ */
+#define HV_FAST_INTR_DEVINO2SYSINO	0xa0
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_devino_to_sysino(unsigned long devhandle,
+					    unsigned long devino);
+#endif
+
+/* intr_getenabled()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_INTR_GETENABLED
+ * ARG0:	sysino
+ * RET0:	status
+ * RET1:	intr_enabled (HV_INTR_{DISABLED,ENABLED})
+ * ERRORS:	EINVAL		Invalid sysino
+ *
+ * Returns interrupt enabled state in RET1 for the interrupt defined
+ * by the given sysino.
+ */
+#define HV_FAST_INTR_GETENABLED		0xa1
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_getenabled(unsigned long sysino);
+#endif
+
+/* intr_setenabled()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_INTR_SETENABLED
+ * ARG0:	sysino
+ * ARG1:	intr_enabled (HV_INTR_{DISABLED,ENABLED})
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid sysino or intr_enabled value
+ *
+ * Set the 'enabled' state of the interrupt sysino.
+ */
+#define HV_FAST_INTR_SETENABLED		0xa2
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_setenabled(unsigned long sysino, unsigned long intr_enabled);
+#endif
+
+/* intr_getstate()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_INTR_GETSTATE
+ * ARG0:	sysino
+ * RET0:	status
+ * RET1:	intr_state (HV_INTR_STATE_*)
+ * ERRORS:	EINVAL		Invalid sysino
+ *
+ * Returns current state of the interrupt defined by the given sysino.
+ */
+#define HV_FAST_INTR_GETSTATE		0xa3
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_getstate(unsigned long sysino);
+#endif
+
+/* intr_setstate()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_INTR_SETSTATE
+ * ARG0:	sysino
+ * ARG1:	intr_state (HV_INTR_STATE_*)
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid sysino or intr_state value
+ *
+ * Sets the current state of the interrupt described by the given sysino
+ * value.
+ *
+ * Note: Setting the state to HV_INTR_STATE_IDLE clears any pending
+ *       interrupt for sysino.
+ */
+#define HV_FAST_INTR_SETSTATE		0xa4
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_setstate(unsigned long sysino, unsigned long intr_state);
+#endif
+
+/* intr_gettarget()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_INTR_GETTARGET
+ * ARG0:	sysino
+ * RET0:	status
+ * RET1:	cpuid
+ * ERRORS:	EINVAL		Invalid sysino
+ *
+ * Returns CPU that is the current target of the interrupt defined by
+ * the given sysino.  The CPU value returned is undefined if the target
+ * has not been set via intr_settarget().
+ */
+#define HV_FAST_INTR_GETTARGET		0xa5
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_gettarget(unsigned long sysino);
+#endif
+
+/* intr_settarget()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_INTR_SETTARGET
+ * ARG0:	sysino
+ * ARG1:	cpuid
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid sysino
+ *		ENOCPU		Invalid cpuid
+ *
+ * Set the target CPU for the interrupt defined by the given sysino.
+ */
+#define HV_FAST_INTR_SETTARGET		0xa6
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_settarget(unsigned long sysino, unsigned long cpuid);
+#endif
+
+/* vintr_get_cookie()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_VINTR_GET_COOKIE
+ * ARG0:	device handle
+ * ARG1:	device ino
+ * RET0:	status
+ * RET1:	cookie
+ */
+#define HV_FAST_VINTR_GET_COOKIE	0xa7
+
+/* vintr_set_cookie()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_VINTR_SET_COOKIE
+ * ARG0:	device handle
+ * ARG1:	device ino
+ * ARG2:	cookie
+ * RET0:	status
+ */
+#define HV_FAST_VINTR_SET_COOKIE	0xa8
+
+/* vintr_get_valid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_VINTR_GET_VALID
+ * ARG0:	device handle
+ * ARG1:	device ino
+ * RET0:	status
+ * RET1:	valid state
+ */
+#define HV_FAST_VINTR_GET_VALID		0xa9
+
+/* vintr_set_valid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_VINTR_SET_VALID
+ * ARG0:	device handle
+ * ARG1:	device ino
+ * ARG2:	valid state
+ * RET0:	status
+ */
+#define HV_FAST_VINTR_SET_VALID		0xaa
+
+/* vintr_get_state()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_VINTR_GET_STATE
+ * ARG0:	device handle
+ * ARG1:	device ino
+ * RET0:	status
+ * RET1:	state
+ */
+#define HV_FAST_VINTR_GET_STATE		0xab
+
+/* vintr_set_state()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_VINTR_SET_STATE
+ * ARG0:	device handle
+ * ARG1:	device ino
+ * ARG2:	state
+ * RET0:	status
+ */
+#define HV_FAST_VINTR_SET_STATE		0xac
+
+/* vintr_get_target()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_VINTR_GET_TARGET
+ * ARG0:	device handle
+ * ARG1:	device ino
+ * RET0:	status
+ * RET1:	cpuid
+ */
+#define HV_FAST_VINTR_GET_TARGET	0xad
+
+/* vintr_set_target()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_VINTR_SET_TARGET
+ * ARG0:	device handle
+ * ARG1:	device ino
+ * ARG2:	cpuid
+ * RET0:	status
+ */
+#define HV_FAST_VINTR_SET_TARGET	0xae
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_vintr_get_cookie(unsigned long dev_handle,
+					    unsigned long dev_ino,
+					    unsigned long *cookie);
+extern unsigned long sun4v_vintr_set_cookie(unsigned long dev_handle,
+					    unsigned long dev_ino,
+					    unsigned long cookie);
+extern unsigned long sun4v_vintr_get_valid(unsigned long dev_handle,
+					   unsigned long dev_ino,
+					   unsigned long *valid);
+extern unsigned long sun4v_vintr_set_valid(unsigned long dev_handle,
+					   unsigned long dev_ino,
+					   unsigned long valid);
+extern unsigned long sun4v_vintr_get_state(unsigned long dev_handle,
+					   unsigned long dev_ino,
+					   unsigned long *state);
+extern unsigned long sun4v_vintr_set_state(unsigned long dev_handle,
+					   unsigned long dev_ino,
+					   unsigned long state);
+extern unsigned long sun4v_vintr_get_target(unsigned long dev_handle,
+					    unsigned long dev_ino,
+					    unsigned long *cpuid);
+extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle,
+					    unsigned long dev_ino,
+					    unsigned long cpuid);
+#endif
+
+/* PCI IO services.
+ *
+ * See the terminology descriptions in the device interrupt services
+ * section above as those apply here too.  Here are terminology
+ * definitions specific to these PCI IO services:
+ *
+ *	tsbnum		TSB number.  Indentifies which io-tsb is used.
+ *			For this version of the specification, tsbnum
+ *			must be zero.
+ *
+ *	tsbindex	TSB index.  Identifies which entry in the TSB
+ *			is used.  The first entry is zero.
+ *
+ *	tsbid		A 64-bit aligned data structure which contains
+ *			a tsbnum and a tsbindex.  Bits 63:32 contain the
+ *			tsbnum and bits 31:00 contain the tsbindex.
+ *
+ *			Use the HV_PCI_TSBID() macro to construct such
+ * 			values.
+ *
+ *	io_attributes	IO attributes for IOMMU mappings.  One of more
+ *			of the attritbute bits are stores in a 64-bit
+ *			value.  The values are defined below.
+ *
+ *	r_addr		64-bit real address
+ *
+ *	pci_device	PCI device address.  A PCI device address identifies
+ *			a specific device on a specific PCI bus segment.
+ *			A PCI device address ia a 32-bit unsigned integer
+ *			with the following format:
+ *
+ *				00000000.bbbbbbbb.dddddfff.00000000
+ *
+ *			Use the HV_PCI_DEVICE_BUILD() macro to construct
+ *			such values.
+ *
+ *	pci_config_offset
+ *			PCI configureation space offset.  For conventional
+ *			PCI a value between 0 and 255.  For extended
+ *			configuration space, a value between 0 and 4095.
+ *
+ *			Note: For PCI configuration space accesses, the offset
+ *			      must be aligned to the access size.
+ *
+ *	error_flag	A return value which specifies if the action succeeded
+ *			or failed.  0 means no error, non-0 means some error
+ *			occurred while performing the service.
+ *
+ *	io_sync_direction
+ *			Direction definition for pci_dma_sync(), defined
+ *			below in HV_PCI_SYNC_*.
+ *
+ *	io_page_list	A list of io_page_addresses, an io_page_address is
+ *			a real address.
+ *
+ *	io_page_list_p	A pointer to an io_page_list.
+ *
+ *	"size based byte swap" - Some functions do size based byte swapping
+ *				 which allows sw to access pointers and
+ *				 counters in native form when the processor
+ *				 operates in a different endianness than the
+ *				 IO bus.  Size-based byte swapping converts a
+ *				 multi-byte field between big-endian and
+ *				 little-endian format.
+ */
+
+#define HV_PCI_MAP_ATTR_READ		0x01
+#define HV_PCI_MAP_ATTR_WRITE		0x02
+
+#define HV_PCI_DEVICE_BUILD(b,d,f)	\
+	((((b) & 0xff) << 16) | \
+	 (((d) & 0x1f) << 11) | \
+	 (((f) & 0x07) <<  8))
+
+#define HV_PCI_TSBID(__tsb_num, __tsb_index) \
+	((((u64)(__tsb_num)) << 32UL) | ((u64)(__tsb_index)))
+
+#define HV_PCI_SYNC_FOR_DEVICE		0x01
+#define HV_PCI_SYNC_FOR_CPU		0x02
+
+/* pci_iommu_map()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_IOMMU_MAP
+ * ARG0:	devhandle
+ * ARG1:	tsbid
+ * ARG2:	#ttes
+ * ARG3:	io_attributes
+ * ARG4:	io_page_list_p
+ * RET0:	status
+ * RET1:	#ttes mapped
+ * ERRORS:	EINVAL		Invalid devhandle/tsbnum/tsbindex/io_attributes
+ *		EBADALIGN	Improperly aligned real address
+ *		ENORADDR	Invalid real address
+ *
+ * Create IOMMU mappings in the sun4v device defined by the given
+ * devhandle.  The mappings are created in the TSB defined by the
+ * tsbnum component of the given tsbid.  The first mapping is created
+ * in the TSB i ndex defined by the tsbindex component of the given tsbid.
+ * The call creates up to #ttes mappings, the first one at tsbnum, tsbindex,
+ * the second at tsbnum, tsbindex + 1, etc.
+ *
+ * All mappings are created with the attributes defined by the io_attributes
+ * argument.  The page mapping addresses are described in the io_page_list
+ * defined by the given io_page_list_p, which is a pointer to the io_page_list.
+ * The first entry in the io_page_list is the address for the first iotte, the
+ * 2nd for the 2nd iotte, and so on.
+ *
+ * Each io_page_address in the io_page_list must be appropriately aligned.
+ * #ttes must be greater than zero.  For this version of the spec, the tsbnum
+ * component of the given tsbid must be zero.
+ *
+ * Returns the actual number of mappings creates, which may be less than
+ * or equal to the argument #ttes.  If the function returns a value which
+ * is less than the #ttes, the caller may continus to call the function with
+ * an updated tsbid, #ttes, io_page_list_p arguments until all pages are
+ * mapped.
+ *
+ * Note: This function does not imply an iotte cache flush.  The guest must
+ *       demap an entry before re-mapping it.
+ */
+#define HV_FAST_PCI_IOMMU_MAP		0xb0
+
+/* pci_iommu_demap()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_IOMMU_DEMAP
+ * ARG0:	devhandle
+ * ARG1:	tsbid
+ * ARG2:	#ttes
+ * RET0:	status
+ * RET1:	#ttes demapped
+ * ERRORS:	EINVAL		Invalid devhandle/tsbnum/tsbindex
+ *
+ * Demap and flush IOMMU mappings in the device defined by the given
+ * devhandle.  Demaps up to #ttes entries in the TSB defined by the tsbnum
+ * component of the given tsbid, starting at the TSB index defined by the
+ * tsbindex component of the given tsbid.
+ *
+ * For this version of the spec, the tsbnum of the given tsbid must be zero.
+ * #ttes must be greater than zero.
+ *
+ * Returns the actual number of ttes demapped, which may be less than or equal
+ * to the argument #ttes.  If #ttes demapped is less than #ttes, the caller
+ * may continue to call this function with updated tsbid and #ttes arguments
+ * until all pages are demapped.
+ *
+ * Note: Entries do not have to be mapped to be demapped.  A demap of an
+ *       unmapped page will flush the entry from the tte cache.
+ */
+#define HV_FAST_PCI_IOMMU_DEMAP		0xb1
+
+/* pci_iommu_getmap()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_IOMMU_GETMAP
+ * ARG0:	devhandle
+ * ARG1:	tsbid
+ * RET0:	status
+ * RET1:	io_attributes
+ * RET2:	real address
+ * ERRORS:	EINVAL		Invalid devhandle/tsbnum/tsbindex
+ *		ENOMAP		Mapping is not valid, no translation exists
+ *
+ * Read and return the mapping in the device described by the given devhandle
+ * and tsbid.  If successful, the io_attributes shall be returned in RET1
+ * and the page address of the mapping shall be returned in RET2.
+ *
+ * For this version of the spec, the tsbnum component of the given tsbid
+ * must be zero.
+ */
+#define HV_FAST_PCI_IOMMU_GETMAP	0xb2
+
+/* pci_iommu_getbypass()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_IOMMU_GETBYPASS
+ * ARG0:	devhandle
+ * ARG1:	real address
+ * ARG2:	io_attributes
+ * RET0:	status
+ * RET1:	io_addr
+ * ERRORS:	EINVAL		Invalid devhandle/io_attributes
+ *		ENORADDR	Invalid real address
+ *		ENOTSUPPORTED	Function not supported in this implementation.
+ *
+ * Create a "special" mapping in the device described by the given devhandle,
+ * for the given real address and attributes.  Return the IO address in RET1
+ * if successful.
+ */
+#define HV_FAST_PCI_IOMMU_GETBYPASS	0xb3
+
+/* pci_config_get()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_CONFIG_GET
+ * ARG0:	devhandle
+ * ARG1:	pci_device
+ * ARG2:	pci_config_offset
+ * ARG3:	size
+ * RET0:	status
+ * RET1:	error_flag
+ * RET2:	data
+ * ERRORS:	EINVAL		Invalid devhandle/pci_device/offset/size
+ *		EBADALIGN	pci_config_offset not size aligned
+ *		ENOACCESS	Access to this offset is not permitted
+ *
+ * Read PCI configuration space for the adapter described by the given
+ * devhandle.  Read size (1, 2, or 4) bytes of data from the given
+ * pci_device, at pci_config_offset from the beginning of the device's
+ * configuration space.  If there was no error, RET1 is set to zero and
+ * RET2 is set to the data read.  Insignificant bits in RET2 are not
+ * guarenteed to have any specific value and therefore must be ignored.
+ *
+ * The data returned in RET2 is size based byte swapped.
+ *
+ * If an error occurs during the read, set RET1 to a non-zero value.  The
+ * given pci_config_offset must be 'size' aligned.
+ */
+#define HV_FAST_PCI_CONFIG_GET		0xb4
+
+/* pci_config_put()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_CONFIG_PUT
+ * ARG0:	devhandle
+ * ARG1:	pci_device
+ * ARG2:	pci_config_offset
+ * ARG3:	size
+ * ARG4:	data
+ * RET0:	status
+ * RET1:	error_flag
+ * ERRORS:	EINVAL		Invalid devhandle/pci_device/offset/size
+ *		EBADALIGN	pci_config_offset not size aligned
+ *		ENOACCESS	Access to this offset is not permitted
+ *
+ * Write PCI configuration space for the adapter described by the given
+ * devhandle.  Write size (1, 2, or 4) bytes of data in a single operation,
+ * at pci_config_offset from the beginning of the device's configuration
+ * space.  The data argument contains the data to be written to configuration
+ * space.  Prior to writing, the data is size based byte swapped.
+ *
+ * If an error occurs during the write access, do not generate an error
+ * report, do set RET1 to a non-zero value.  Otherwise RET1 is zero.
+ * The given pci_config_offset must be 'size' aligned.
+ *
+ * This function is permitted to read from offset zero in the configuration
+ * space described by the given pci_device if necessary to ensure that the
+ * write access to config space completes.
+ */
+#define HV_FAST_PCI_CONFIG_PUT		0xb5
+
+/* pci_peek()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_PEEK
+ * ARG0:	devhandle
+ * ARG1:	real address
+ * ARG2:	size
+ * RET0:	status
+ * RET1:	error_flag
+ * RET2:	data
+ * ERRORS:	EINVAL		Invalid devhandle or size
+ *		EBADALIGN	Improperly aligned real address
+ *		ENORADDR	Bad real address
+ *		ENOACCESS	Guest access prohibited
+ *
+ * Attempt to read the IO address given by the given devhandle, real address,
+ * and size.  Size must be 1, 2, 4, or 8.  The read is performed as a single
+ * access operation using the given size.  If an error occurs when reading
+ * from the given location, do not generate an error report, but return a
+ * non-zero value in RET1.  If the read was successful, return zero in RET1
+ * and return the actual data read in RET2.  The data returned is size based
+ * byte swapped.
+ *
+ * Non-significant bits in RET2 are not guarenteed to have any specific value
+ * and therefore must be ignored.  If RET1 is returned as non-zero, the data
+ * value is not guarenteed to have any specific value and should be ignored.
+ *
+ * The caller must have permission to read from the given devhandle, real
+ * address, which must be an IO address.  The argument real address must be a
+ * size aligned address.
+ *
+ * The hypervisor implementation of this function must block access to any
+ * IO address that the guest does not have explicit permission to access.
+ */
+#define HV_FAST_PCI_PEEK		0xb6
+
+/* pci_poke()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_POKE
+ * ARG0:	devhandle
+ * ARG1:	real address
+ * ARG2:	size
+ * ARG3:	data
+ * ARG4:	pci_device
+ * RET0:	status
+ * RET1:	error_flag
+ * ERRORS:	EINVAL		Invalid devhandle, size, or pci_device
+ *		EBADALIGN	Improperly aligned real address
+ *		ENORADDR	Bad real address
+ *		ENOACCESS	Guest access prohibited
+ *		ENOTSUPPORTED	Function is not supported by implementation
+ *
+ * Attempt to write data to the IO address given by the given devhandle,
+ * real address, and size.  Size must be 1, 2, 4, or 8.  The write is
+ * performed as a single access operation using the given size. Prior to
+ * writing the data is size based swapped.
+ *
+ * If an error occurs when writing to the given location, do not generate an
+ * error report, but return a non-zero value in RET1.  If the write was
+ * successful, return zero in RET1.
+ *
+ * pci_device describes the configuration address of the device being
+ * written to.  The implementation may safely read from offset 0 with
+ * the configuration space of the device described by devhandle and
+ * pci_device in order to guarantee that the write portion of the operation
+ * completes
+ *
+ * Any error that occurs due to the read shall be reported using the normal
+ * error reporting mechanisms .. the read error is not suppressed.
+ *
+ * The caller must have permission to write to the given devhandle, real
+ * address, which must be an IO address.  The argument real address must be a
+ * size aligned address.  The caller must have permission to read from
+ * the given devhandle, pci_device cofiguration space offset 0.
+ *
+ * The hypervisor implementation of this function must block access to any
+ * IO address that the guest does not have explicit permission to access.
+ */
+#define HV_FAST_PCI_POKE		0xb7
+
+/* pci_dma_sync()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_DMA_SYNC
+ * ARG0:	devhandle
+ * ARG1:	real address
+ * ARG2:	size
+ * ARG3:	io_sync_direction
+ * RET0:	status
+ * RET1:	#synced
+ * ERRORS:	EINVAL		Invalid devhandle or io_sync_direction
+ *		ENORADDR	Bad real address
+ *
+ * Synchronize a memory region described by the given real address and size,
+ * for the device defined by the given devhandle using the direction(s)
+ * defined by the given io_sync_direction.  The argument size is the size of
+ * the memory region in bytes.
+ *
+ * Return the actual number of bytes synchronized in the return value #synced,
+ * which may be less than or equal to the argument size.  If the return
+ * value #synced is less than size, the caller must continue to call this
+ * function with updated real address and size arguments until the entire
+ * memory region is synchronized.
+ */
+#define HV_FAST_PCI_DMA_SYNC		0xb8
+
+/* PCI MSI services.  */
+
+#define HV_MSITYPE_MSI32		0x00
+#define HV_MSITYPE_MSI64		0x01
+
+#define HV_MSIQSTATE_IDLE		0x00
+#define HV_MSIQSTATE_ERROR		0x01
+
+#define HV_MSIQ_INVALID			0x00
+#define HV_MSIQ_VALID			0x01
+
+#define HV_MSISTATE_IDLE		0x00
+#define HV_MSISTATE_DELIVERED		0x01
+
+#define HV_MSIVALID_INVALID		0x00
+#define HV_MSIVALID_VALID		0x01
+
+#define HV_PCIE_MSGTYPE_PME_MSG		0x18
+#define HV_PCIE_MSGTYPE_PME_ACK_MSG	0x1b
+#define HV_PCIE_MSGTYPE_CORR_MSG	0x30
+#define HV_PCIE_MSGTYPE_NONFATAL_MSG	0x31
+#define HV_PCIE_MSGTYPE_FATAL_MSG	0x33
+
+#define HV_MSG_INVALID			0x00
+#define HV_MSG_VALID			0x01
+
+/* pci_msiq_conf()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_CONF
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * ARG2:	real address
+ * ARG3:	number of entries
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle, msiqid or nentries
+ *		EBADALIGN	Improperly aligned real address
+ *		ENORADDR	Bad real address
+ *
+ * Configure the MSI queue given by the devhandle and msiqid arguments,
+ * and to be placed at the given real address and be of the given
+ * number of entries.  The real address must be aligned exactly to match
+ * the queue size.  Each queue entry is 64-bytes long, so f.e. a 32 entry
+ * queue must be aligned on a 2048 byte real address boundary.  The MSI-EQ
+ * Head and Tail are initialized so that the MSI-EQ is 'empty'.
+ *
+ * Implementation Note: Certain implementations have fixed sized queues.  In
+ *                      that case, number of entries must contain the correct
+ *                      value.
+ */
+#define HV_FAST_PCI_MSIQ_CONF		0xc0
+
+/* pci_msiq_info()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_INFO
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * RET0:	status
+ * RET1:	real address
+ * RET2:	number of entries
+ * ERRORS:	EINVAL		Invalid devhandle or msiqid
+ *
+ * Return the configuration information for the MSI queue described
+ * by the given devhandle and msiqid.  The base address of the queue
+ * is returned in ARG1 and the number of entries is returned in ARG2.
+ * If the queue is unconfigured, the real address is undefined and the
+ * number of entries will be returned as zero.
+ */
+#define HV_FAST_PCI_MSIQ_INFO		0xc1
+
+/* pci_msiq_getvalid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_GETVALID
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * RET0:	status
+ * RET1:	msiqvalid	(HV_MSIQ_VALID or HV_MSIQ_INVALID)
+ * ERRORS:	EINVAL		Invalid devhandle or msiqid
+ *
+ * Get the valid state of the MSI-EQ described by the given devhandle and
+ * msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_GETVALID	0xc2
+
+/* pci_msiq_setvalid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_SETVALID
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * ARG2:	msiqvalid	(HV_MSIQ_VALID or HV_MSIQ_INVALID)
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle or msiqid or msiqvalid
+ *				value or MSI EQ is uninitialized
+ *
+ * Set the valid state of the MSI-EQ described by the given devhandle and
+ * msiqid to the given msiqvalid.
+ */
+#define HV_FAST_PCI_MSIQ_SETVALID	0xc3
+
+/* pci_msiq_getstate()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_GETSTATE
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * RET0:	status
+ * RET1:	msiqstate	(HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR)
+ * ERRORS:	EINVAL		Invalid devhandle or msiqid
+ *
+ * Get the state of the MSI-EQ described by the given devhandle and
+ * msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_GETSTATE	0xc4
+
+/* pci_msiq_getvalid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_GETVALID
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * ARG2:	msiqstate	(HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR)
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle or msiqid or msiqstate
+ *				value or MSI EQ is uninitialized
+ *
+ * Set the state of the MSI-EQ described by the given devhandle and
+ * msiqid to the given msiqvalid.
+ */
+#define HV_FAST_PCI_MSIQ_SETSTATE	0xc5
+
+/* pci_msiq_gethead()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_GETHEAD
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * RET0:	status
+ * RET1:	msiqhead
+ * ERRORS:	EINVAL		Invalid devhandle or msiqid
+ *
+ * Get the current MSI EQ queue head for the MSI-EQ described by the
+ * given devhandle and msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_GETHEAD	0xc6
+
+/* pci_msiq_sethead()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_SETHEAD
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * ARG2:	msiqhead
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle or msiqid or msiqhead,
+ *				or MSI EQ is uninitialized
+ *
+ * Set the current MSI EQ queue head for the MSI-EQ described by the
+ * given devhandle and msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_SETHEAD	0xc7
+
+/* pci_msiq_gettail()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_GETTAIL
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * RET0:	status
+ * RET1:	msiqtail
+ * ERRORS:	EINVAL		Invalid devhandle or msiqid
+ *
+ * Get the current MSI EQ queue tail for the MSI-EQ described by the
+ * given devhandle and msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_GETTAIL	0xc8
+
+/* pci_msi_getvalid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSI_GETVALID
+ * ARG0:	devhandle
+ * ARG1:	msinum
+ * RET0:	status
+ * RET1:	msivalidstate
+ * ERRORS:	EINVAL		Invalid devhandle or msinum
+ *
+ * Get the current valid/enabled state for the MSI defined by the
+ * given devhandle and msinum.
+ */
+#define HV_FAST_PCI_MSI_GETVALID	0xc9
+
+/* pci_msi_setvalid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSI_SETVALID
+ * ARG0:	devhandle
+ * ARG1:	msinum
+ * ARG2:	msivalidstate
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle or msinum or msivalidstate
+ *
+ * Set the current valid/enabled state for the MSI defined by the
+ * given devhandle and msinum.
+ */
+#define HV_FAST_PCI_MSI_SETVALID	0xca
+
+/* pci_msi_getmsiq()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSI_GETMSIQ
+ * ARG0:	devhandle
+ * ARG1:	msinum
+ * RET0:	status
+ * RET1:	msiqid
+ * ERRORS:	EINVAL		Invalid devhandle or msinum or MSI is unbound
+ *
+ * Get the MSI EQ that the MSI defined by the given devhandle and
+ * msinum is bound to.
+ */
+#define HV_FAST_PCI_MSI_GETMSIQ		0xcb
+
+/* pci_msi_setmsiq()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSI_SETMSIQ
+ * ARG0:	devhandle
+ * ARG1:	msinum
+ * ARG2:	msitype
+ * ARG3:	msiqid
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle or msinum or msiqid
+ *
+ * Set the MSI EQ that the MSI defined by the given devhandle and
+ * msinum is bound to.
+ */
+#define HV_FAST_PCI_MSI_SETMSIQ		0xcc
+
+/* pci_msi_getstate()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSI_GETSTATE
+ * ARG0:	devhandle
+ * ARG1:	msinum
+ * RET0:	status
+ * RET1:	msistate
+ * ERRORS:	EINVAL		Invalid devhandle or msinum
+ *
+ * Get the state of the MSI defined by the given devhandle and msinum.
+ * If not initialized, return HV_MSISTATE_IDLE.
+ */
+#define HV_FAST_PCI_MSI_GETSTATE	0xcd
+
+/* pci_msi_setstate()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSI_SETSTATE
+ * ARG0:	devhandle
+ * ARG1:	msinum
+ * ARG2:	msistate
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle or msinum or msistate
+ *
+ * Set the state of the MSI defined by the given devhandle and msinum.
+ */
+#define HV_FAST_PCI_MSI_SETSTATE	0xce
+
+/* pci_msg_getmsiq()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSG_GETMSIQ
+ * ARG0:	devhandle
+ * ARG1:	msgtype
+ * RET0:	status
+ * RET1:	msiqid
+ * ERRORS:	EINVAL		Invalid devhandle or msgtype
+ *
+ * Get the MSI EQ of the MSG defined by the given devhandle and msgtype.
+ */
+#define HV_FAST_PCI_MSG_GETMSIQ		0xd0
+
+/* pci_msg_setmsiq()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSG_SETMSIQ
+ * ARG0:	devhandle
+ * ARG1:	msgtype
+ * ARG2:	msiqid
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle, msgtype, or msiqid
+ *
+ * Set the MSI EQ of the MSG defined by the given devhandle and msgtype.
+ */
+#define HV_FAST_PCI_MSG_SETMSIQ		0xd1
+
+/* pci_msg_getvalid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSG_GETVALID
+ * ARG0:	devhandle
+ * ARG1:	msgtype
+ * RET0:	status
+ * RET1:	msgvalidstate
+ * ERRORS:	EINVAL		Invalid devhandle or msgtype
+ *
+ * Get the valid/enabled state of the MSG defined by the given
+ * devhandle and msgtype.
+ */
+#define HV_FAST_PCI_MSG_GETVALID	0xd2
+
+/* pci_msg_setvalid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSG_SETVALID
+ * ARG0:	devhandle
+ * ARG1:	msgtype
+ * ARG2:	msgvalidstate
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle or msgtype or msgvalidstate
+ *
+ * Set the valid/enabled state of the MSG defined by the given
+ * devhandle and msgtype.
+ */
+#define HV_FAST_PCI_MSG_SETVALID	0xd3
+
+/* Logical Domain Channel services.  */
+
+#define LDC_CHANNEL_DOWN		0
+#define LDC_CHANNEL_UP			1
+#define LDC_CHANNEL_RESETTING		2
+
+/* ldc_tx_qconf()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_TX_QCONF
+ * ARG0:	channel ID
+ * ARG1:	real address base of queue
+ * ARG2:	num entries in queue
+ * RET0:	status
+ *
+ * Configure transmit queue for the LDC endpoint specified by the
+ * given channel ID, to be placed at the given real address, and
+ * be of the given num entries.  Num entries must be a power of two.
+ * The real address base of the queue must be aligned on the queue
+ * size.  Each queue entry is 64-bytes, so for example, a 32 entry
+ * queue must be aligned on a 2048 byte real address boundary.
+ *
+ * Upon configuration of a valid transmit queue the head and tail
+ * pointers are set to a hypervisor specific identical value indicating
+ * that the queue initially is empty.
+ *
+ * The endpoint's transmit queue is un-configured if num entries is zero.
+ *
+ * The maximum number of entries for each queue for a specific cpu may be
+ * determined from the machine description.  A transmit queue may be
+ * specified even in the event that the LDC is down (peer endpoint has no
+ * receive queue specified).  Transmission will begin as soon as the peer
+ * endpoint defines a receive queue.
+ *
+ * It is recommended that a guest wait for a transmit queue to empty prior
+ * to reconfiguring it, or un-configuring it.  Re or un-configuring of a
+ * non-empty transmit queue behaves exactly as defined above, however it
+ * is undefined as to how many of the pending entries in the original queue
+ * will be delivered prior to the re-configuration taking effect.
+ * Furthermore, as the queue configuration causes a reset of the head and
+ * tail pointers there is no way for a guest to determine how many entries
+ * have been sent after the configuration operation.
+ */
+#define HV_FAST_LDC_TX_QCONF		0xe0
+
+/* ldc_tx_qinfo()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_TX_QINFO
+ * ARG0:	channel ID
+ * RET0:	status
+ * RET1:	real address base of queue
+ * RET2:	num entries in queue
+ *
+ * Return the configuration info for the transmit queue of LDC endpoint
+ * defined by the given channel ID.  The real address is the currently
+ * defined real address base of the defined queue, and num entries is the
+ * size of the queue in terms of number of entries.
+ *
+ * If the specified channel ID is a valid endpoint number, but no transmit
+ * queue has been defined this service will return success, but with num
+ * entries set to zero and the real address will have an undefined value.
+ */
+#define HV_FAST_LDC_TX_QINFO		0xe1
+
+/* ldc_tx_get_state()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_TX_GET_STATE
+ * ARG0:	channel ID
+ * RET0:	status
+ * RET1:	head offset
+ * RET2:	tail offset
+ * RET3:	channel state
+ *
+ * Return the transmit state, and the head and tail queue pointers, for
+ * the transmit queue of the LDC endpoint defined by the given channel ID.
+ * The head and tail values are the byte offset of the head and tail
+ * positions of the transmit queue for the specified endpoint.
+ */
+#define HV_FAST_LDC_TX_GET_STATE	0xe2
+
+/* ldc_tx_set_qtail()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_TX_SET_QTAIL
+ * ARG0:	channel ID
+ * ARG1:	tail offset
+ * RET0:	status
+ *
+ * Update the tail pointer for the transmit queue associated with the LDC
+ * endpoint defined by the given channel ID.  The tail offset specified
+ * must be aligned on a 64 byte boundary, and calculated so as to increase
+ * the number of pending entries on the transmit queue.  Any attempt to
+ * decrease the number of pending transmit queue entires is considered
+ * an invalid tail offset and will result in an EINVAL error.
+ *
+ * Since the tail of the transmit queue may not be moved backwards, the
+ * transmit queue may be flushed by configuring a new transmit queue,
+ * whereupon the hypervisor will configure the initial transmit head and
+ * tail pointers to be equal.
+ */
+#define HV_FAST_LDC_TX_SET_QTAIL	0xe3
+
+/* ldc_rx_qconf()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_RX_QCONF
+ * ARG0:	channel ID
+ * ARG1:	real address base of queue
+ * ARG2:	num entries in queue
+ * RET0:	status
+ *
+ * Configure receive queue for the LDC endpoint specified by the
+ * given channel ID, to be placed at the given real address, and
+ * be of the given num entries.  Num entries must be a power of two.
+ * The real address base of the queue must be aligned on the queue
+ * size.  Each queue entry is 64-bytes, so for example, a 32 entry
+ * queue must be aligned on a 2048 byte real address boundary.
+ *
+ * The endpoint's transmit queue is un-configured if num entries is zero.
+ *
+ * If a valid receive queue is specified for a local endpoint the LDC is
+ * in the up state for the purpose of transmission to this endpoint.
+ *
+ * The maximum number of entries for each queue for a specific cpu may be
+ * determined from the machine description.
+ *
+ * As receive queue configuration causes a reset of the queue's head and
+ * tail pointers there is no way for a gues to determine how many entries
+ * have been received between a preceeding ldc_get_rx_state() API call
+ * and the completion of the configuration operation.  It should be noted
+ * that datagram delivery is not guarenteed via domain channels anyway,
+ * and therefore any higher protocol should be resilient to datagram
+ * loss if necessary.  However, to overcome this specific race potential
+ * it is recommended, for example, that a higher level protocol be employed
+ * to ensure either retransmission, or ensure that no datagrams are pending
+ * on the peer endpoint's transmit queue prior to the configuration process.
+ */
+#define HV_FAST_LDC_RX_QCONF		0xe4
+
+/* ldc_rx_qinfo()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_RX_QINFO
+ * ARG0:	channel ID
+ * RET0:	status
+ * RET1:	real address base of queue
+ * RET2:	num entries in queue
+ *
+ * Return the configuration info for the receive queue of LDC endpoint
+ * defined by the given channel ID.  The real address is the currently
+ * defined real address base of the defined queue, and num entries is the
+ * size of the queue in terms of number of entries.
+ *
+ * If the specified channel ID is a valid endpoint number, but no receive
+ * queue has been defined this service will return success, but with num
+ * entries set to zero and the real address will have an undefined value.
+ */
+#define HV_FAST_LDC_RX_QINFO		0xe5
+
+/* ldc_rx_get_state()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_RX_GET_STATE
+ * ARG0:	channel ID
+ * RET0:	status
+ * RET1:	head offset
+ * RET2:	tail offset
+ * RET3:	channel state
+ *
+ * Return the receive state, and the head and tail queue pointers, for
+ * the receive queue of the LDC endpoint defined by the given channel ID.
+ * The head and tail values are the byte offset of the head and tail
+ * positions of the receive queue for the specified endpoint.
+ */
+#define HV_FAST_LDC_RX_GET_STATE	0xe6
+
+/* ldc_rx_set_qhead()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_RX_SET_QHEAD
+ * ARG0:	channel ID
+ * ARG1:	head offset
+ * RET0:	status
+ *
+ * Update the head pointer for the receive queue associated with the LDC
+ * endpoint defined by the given channel ID.  The head offset specified
+ * must be aligned on a 64 byte boundary, and calculated so as to decrease
+ * the number of pending entries on the receive queue.  Any attempt to
+ * increase the number of pending receive queue entires is considered
+ * an invalid head offset and will result in an EINVAL error.
+ *
+ * The receive queue may be flushed by setting the head offset equal
+ * to the current tail offset.
+ */
+#define HV_FAST_LDC_RX_SET_QHEAD	0xe7
+
+/* LDC Map Table Entry.  Each slot is defined by a translation table
+ * entry, as specified by the LDC_MTE_* bits below, and a 64-bit
+ * hypervisor invalidation cookie.
+ */
+#define LDC_MTE_PADDR	0x0fffffffffffe000 /* pa[55:13]          */
+#define LDC_MTE_COPY_W	0x0000000000000400 /* copy write access  */
+#define LDC_MTE_COPY_R	0x0000000000000200 /* copy read access   */
+#define LDC_MTE_IOMMU_W	0x0000000000000100 /* IOMMU write access */
+#define LDC_MTE_IOMMU_R	0x0000000000000080 /* IOMMU read access  */
+#define LDC_MTE_EXEC	0x0000000000000040 /* execute            */
+#define LDC_MTE_WRITE	0x0000000000000020 /* read               */
+#define LDC_MTE_READ	0x0000000000000010 /* write              */
+#define LDC_MTE_SZALL	0x000000000000000f /* page size bits     */
+#define LDC_MTE_SZ16GB	0x0000000000000007 /* 16GB page          */
+#define LDC_MTE_SZ2GB	0x0000000000000006 /* 2GB page           */
+#define LDC_MTE_SZ256MB	0x0000000000000005 /* 256MB page         */
+#define LDC_MTE_SZ32MB	0x0000000000000004 /* 32MB page          */
+#define LDC_MTE_SZ4MB	0x0000000000000003 /* 4MB page           */
+#define LDC_MTE_SZ512K	0x0000000000000002 /* 512K page          */
+#define LDC_MTE_SZ64K	0x0000000000000001 /* 64K page           */
+#define LDC_MTE_SZ8K	0x0000000000000000 /* 8K page            */
+
+#ifndef __ASSEMBLY__
+struct ldc_mtable_entry {
+	unsigned long	mte;
+	unsigned long	cookie;
+};
+#endif
+
+/* ldc_set_map_table()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_SET_MAP_TABLE
+ * ARG0:	channel ID
+ * ARG1:	table real address
+ * ARG2:	num entries
+ * RET0:	status
+ *
+ * Register the MTE table at the given table real address, with the
+ * specified num entries, for the LDC indicated by the given channel
+ * ID.
+ */
+#define HV_FAST_LDC_SET_MAP_TABLE	0xea
+
+/* ldc_get_map_table()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_GET_MAP_TABLE
+ * ARG0:	channel ID
+ * RET0:	status
+ * RET1:	table real address
+ * RET2:	num entries
+ *
+ * Return the configuration of the current mapping table registered
+ * for the given channel ID.
+ */
+#define HV_FAST_LDC_GET_MAP_TABLE	0xeb
+
+#define LDC_COPY_IN	0
+#define LDC_COPY_OUT	1
+
+/* ldc_copy()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_COPY
+ * ARG0:	channel ID
+ * ARG1:	LDC_COPY_* direction code
+ * ARG2:	target real address
+ * ARG3:	local real address
+ * ARG4:	length in bytes
+ * RET0:	status
+ * RET1:	actual length in bytes
+ */
+#define HV_FAST_LDC_COPY		0xec
+
+#define LDC_MEM_READ	1
+#define LDC_MEM_WRITE	2
+#define LDC_MEM_EXEC	4
+
+/* ldc_mapin()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_MAPIN
+ * ARG0:	channel ID
+ * ARG1:	cookie
+ * RET0:	status
+ * RET1:	real address
+ * RET2:	LDC_MEM_* permissions
+ */
+#define HV_FAST_LDC_MAPIN		0xed
+
+/* ldc_unmap()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_UNMAP
+ * ARG0:	real address
+ * RET0:	status
+ */
+#define HV_FAST_LDC_UNMAP		0xee
+
+/* ldc_revoke()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_REVOKE
+ * ARG0:	channel ID
+ * ARG1:	cookie
+ * ARG2:	ldc_mtable_entry cookie
+ * RET0:	status
+ */
+#define HV_FAST_LDC_REVOKE		0xef
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_ldc_tx_qconf(unsigned long channel,
+					unsigned long ra,
+					unsigned long num_entries);
+extern unsigned long sun4v_ldc_tx_qinfo(unsigned long channel,
+					unsigned long *ra,
+					unsigned long *num_entries);
+extern unsigned long sun4v_ldc_tx_get_state(unsigned long channel,
+					    unsigned long *head_off,
+					    unsigned long *tail_off,
+					    unsigned long *chan_state);
+extern unsigned long sun4v_ldc_tx_set_qtail(unsigned long channel,
+					    unsigned long tail_off);
+extern unsigned long sun4v_ldc_rx_qconf(unsigned long channel,
+					unsigned long ra,
+					unsigned long num_entries);
+extern unsigned long sun4v_ldc_rx_qinfo(unsigned long channel,
+					unsigned long *ra,
+					unsigned long *num_entries);
+extern unsigned long sun4v_ldc_rx_get_state(unsigned long channel,
+					    unsigned long *head_off,
+					    unsigned long *tail_off,
+					    unsigned long *chan_state);
+extern unsigned long sun4v_ldc_rx_set_qhead(unsigned long channel,
+					    unsigned long head_off);
+extern unsigned long sun4v_ldc_set_map_table(unsigned long channel,
+					     unsigned long ra,
+					     unsigned long num_entries);
+extern unsigned long sun4v_ldc_get_map_table(unsigned long channel,
+					     unsigned long *ra,
+					     unsigned long *num_entries);
+extern unsigned long sun4v_ldc_copy(unsigned long channel,
+				    unsigned long dir_code,
+				    unsigned long tgt_raddr,
+				    unsigned long lcl_raddr,
+				    unsigned long len,
+				    unsigned long *actual_len);
+extern unsigned long sun4v_ldc_mapin(unsigned long channel,
+				     unsigned long cookie,
+				     unsigned long *ra,
+				     unsigned long *perm);
+extern unsigned long sun4v_ldc_unmap(unsigned long ra);
+extern unsigned long sun4v_ldc_revoke(unsigned long channel,
+				      unsigned long cookie,
+				      unsigned long mte_cookie);
+#endif
+
+/* Performance counter services.  */
+
+#define HV_PERF_JBUS_PERF_CTRL_REG	0x00
+#define HV_PERF_JBUS_PERF_CNT_REG	0x01
+#define HV_PERF_DRAM_PERF_CTRL_REG_0	0x02
+#define HV_PERF_DRAM_PERF_CNT_REG_0	0x03
+#define HV_PERF_DRAM_PERF_CTRL_REG_1	0x04
+#define HV_PERF_DRAM_PERF_CNT_REG_1	0x05
+#define HV_PERF_DRAM_PERF_CTRL_REG_2	0x06
+#define HV_PERF_DRAM_PERF_CNT_REG_2	0x07
+#define HV_PERF_DRAM_PERF_CTRL_REG_3	0x08
+#define HV_PERF_DRAM_PERF_CNT_REG_3	0x09
+
+/* get_perfreg()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_GET_PERFREG
+ * ARG0:	performance reg number
+ * RET0:	status
+ * RET1:	performance reg value
+ * ERRORS:	EINVAL		Invalid performance register number
+ *		ENOACCESS	No access allowed to performance counters
+ *
+ * Read the value of the given DRAM/JBUS performance counter/control register.
+ */
+#define HV_FAST_GET_PERFREG		0x100
+
+/* set_perfreg()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_SET_PERFREG
+ * ARG0:	performance reg number
+ * ARG1:	performance reg value
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid performance register number
+ *		ENOACCESS	No access allowed to performance counters
+ *
+ * Write the given performance reg value to the given DRAM/JBUS
+ * performance counter/control register.
+ */
+#define HV_FAST_SET_PERFREG		0x101
+
+/* MMU statistics services.
+ *
+ * The hypervisor maintains MMU statistics and privileged code provides
+ * a buffer where these statistics can be collected.  It is continually
+ * updated once configured.  The layout is as follows:
+ */
+#ifndef __ASSEMBLY__
+struct hv_mmu_statistics {
+	unsigned long immu_tsb_hits_ctx0_8k_tte;
+	unsigned long immu_tsb_ticks_ctx0_8k_tte;
+	unsigned long immu_tsb_hits_ctx0_64k_tte;
+	unsigned long immu_tsb_ticks_ctx0_64k_tte;
+	unsigned long __reserved1[2];
+	unsigned long immu_tsb_hits_ctx0_4mb_tte;
+	unsigned long immu_tsb_ticks_ctx0_4mb_tte;
+	unsigned long __reserved2[2];
+	unsigned long immu_tsb_hits_ctx0_256mb_tte;
+	unsigned long immu_tsb_ticks_ctx0_256mb_tte;
+	unsigned long __reserved3[4];
+	unsigned long immu_tsb_hits_ctxnon0_8k_tte;
+	unsigned long immu_tsb_ticks_ctxnon0_8k_tte;
+	unsigned long immu_tsb_hits_ctxnon0_64k_tte;
+	unsigned long immu_tsb_ticks_ctxnon0_64k_tte;
+	unsigned long __reserved4[2];
+	unsigned long immu_tsb_hits_ctxnon0_4mb_tte;
+	unsigned long immu_tsb_ticks_ctxnon0_4mb_tte;
+	unsigned long __reserved5[2];
+	unsigned long immu_tsb_hits_ctxnon0_256mb_tte;
+	unsigned long immu_tsb_ticks_ctxnon0_256mb_tte;
+	unsigned long __reserved6[4];
+	unsigned long dmmu_tsb_hits_ctx0_8k_tte;
+	unsigned long dmmu_tsb_ticks_ctx0_8k_tte;
+	unsigned long dmmu_tsb_hits_ctx0_64k_tte;
+	unsigned long dmmu_tsb_ticks_ctx0_64k_tte;
+	unsigned long __reserved7[2];
+	unsigned long dmmu_tsb_hits_ctx0_4mb_tte;
+	unsigned long dmmu_tsb_ticks_ctx0_4mb_tte;
+	unsigned long __reserved8[2];
+	unsigned long dmmu_tsb_hits_ctx0_256mb_tte;
+	unsigned long dmmu_tsb_ticks_ctx0_256mb_tte;
+	unsigned long __reserved9[4];
+	unsigned long dmmu_tsb_hits_ctxnon0_8k_tte;
+	unsigned long dmmu_tsb_ticks_ctxnon0_8k_tte;
+	unsigned long dmmu_tsb_hits_ctxnon0_64k_tte;
+	unsigned long dmmu_tsb_ticks_ctxnon0_64k_tte;
+	unsigned long __reserved10[2];
+	unsigned long dmmu_tsb_hits_ctxnon0_4mb_tte;
+	unsigned long dmmu_tsb_ticks_ctxnon0_4mb_tte;
+	unsigned long __reserved11[2];
+	unsigned long dmmu_tsb_hits_ctxnon0_256mb_tte;
+	unsigned long dmmu_tsb_ticks_ctxnon0_256mb_tte;
+	unsigned long __reserved12[4];
+};
+#endif
+
+/* mmustat_conf()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMUSTAT_CONF
+ * ARG0:	real address
+ * RET0:	status
+ * RET1:	real address
+ * ERRORS:	ENORADDR	Invalid real address
+ *		EBADALIGN	Real address not aligned on 64-byte boundary
+ *		EBADTRAP	API not supported on this processor
+ *
+ * Enable MMU statistic gathering using the buffer at the given real
+ * address on the current virtual CPU.  The new buffer real address
+ * is given in ARG1, and the previously specified buffer real address
+ * is returned in RET1, or is returned as zero for the first invocation.
+ *
+ * If the passed in real address argument is zero, this will disable
+ * MMU statistic collection on the current virtual CPU.  If an error is
+ * returned then no statistics are collected.
+ *
+ * The buffer contents should be initialized to all zeros before being
+ * given to the hypervisor or else the statistics will be meaningless.
+ */
+#define HV_FAST_MMUSTAT_CONF		0x102
+
+/* mmustat_info()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMUSTAT_INFO
+ * RET0:	status
+ * RET1:	real address
+ * ERRORS:	EBADTRAP	API not supported on this processor
+ *
+ * Return the current state and real address of the currently configured
+ * MMU statistics buffer on the current virtual CPU.
+ */
+#define HV_FAST_MMUSTAT_INFO		0x103
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mmustat_conf(unsigned long ra, unsigned long *orig_ra);
+extern unsigned long sun4v_mmustat_info(unsigned long *ra);
+#endif
+
+/* NCS crypto services  */
+
+/* ncs_request() sub-function numbers */
+#define HV_NCS_QCONF			0x01
+#define HV_NCS_QTAIL_UPDATE		0x02
+
+#ifndef __ASSEMBLY__
+struct hv_ncs_queue_entry {
+	/* MAU Control Register */
+	unsigned long	mau_control;
+#define MAU_CONTROL_INV_PARITY	0x0000000000002000
+#define MAU_CONTROL_STRAND	0x0000000000001800
+#define MAU_CONTROL_BUSY	0x0000000000000400
+#define MAU_CONTROL_INT		0x0000000000000200
+#define MAU_CONTROL_OP		0x00000000000001c0
+#define MAU_CONTROL_OP_SHIFT	6
+#define MAU_OP_LOAD_MA_MEMORY	0x0
+#define MAU_OP_STORE_MA_MEMORY	0x1
+#define MAU_OP_MODULAR_MULT	0x2
+#define MAU_OP_MODULAR_REDUCE	0x3
+#define MAU_OP_MODULAR_EXP_LOOP	0x4
+#define MAU_CONTROL_LEN		0x000000000000003f
+#define MAU_CONTROL_LEN_SHIFT	0
+
+	/* Real address of bytes to load or store bytes
+	 * into/out-of the MAU.
+	 */
+	unsigned long	mau_mpa;
+
+	/* Modular Arithmetic MA Offset Register.  */
+	unsigned long	mau_ma;
+
+	/* Modular Arithmetic N Prime Register.  */
+	unsigned long	mau_np;
+};
+
+struct hv_ncs_qconf_arg {
+	unsigned long	mid;      /* MAU ID, 1 per core on Niagara */
+	unsigned long	base;     /* Real address base of queue */
+	unsigned long	end;	  /* Real address end of queue */
+	unsigned long	num_ents; /* Number of entries in queue */
+};
+
+struct hv_ncs_qtail_update_arg {
+	unsigned long	mid;      /* MAU ID, 1 per core on Niagara */
+	unsigned long	tail;     /* New tail index to use */
+	unsigned long	syncflag; /* only SYNCFLAG_SYNC is implemented */
+#define HV_NCS_SYNCFLAG_SYNC	0x00
+#define HV_NCS_SYNCFLAG_ASYNC	0x01
+};
+#endif
+
+/* ncs_request()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_NCS_REQUEST
+ * ARG0:	NCS sub-function
+ * ARG1:	sub-function argument real address
+ * ARG2:	size in bytes of sub-function argument
+ * RET0:	status
+ *
+ * The MAU chip of the Niagara processor is not directly accessible
+ * to privileged code, instead it is programmed indirectly via this
+ * hypervisor API.
+ *
+ * The interfaces defines a queue of MAU operations to perform.
+ * Privileged code registers a queue with the hypervisor by invoking
+ * this HVAPI with the HV_NCS_QCONF sub-function, which defines the
+ * base, end, and number of entries of the queue.  Each queue entry
+ * contains a MAU register struct block.
+ *
+ * The privileged code then proceeds to add entries to the queue and
+ * then invoke the HV_NCS_QTAIL_UPDATE sub-function.  Since only
+ * synchronous operations are supported by the current hypervisor,
+ * HV_NCS_QTAIL_UPDATE will run all the pending queue entries to
+ * completion and return HV_EOK, or return an error code.
+ *
+ * The real address of the sub-function argument must be aligned on at
+ * least an 8-byte boundary.
+ *
+ * The tail argument of HV_NCS_QTAIL_UPDATE is an index, not a byte
+ * offset, into the queue and must be less than or equal the 'num_ents'
+ * argument given in the HV_NCS_QCONF call.
+ */
+#define HV_FAST_NCS_REQUEST		0x110
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_ncs_request(unsigned long request,
+				       unsigned long arg_ra,
+				       unsigned long arg_size);
+#endif
+
+#define HV_FAST_FIRE_GET_PERFREG	0x120
+#define HV_FAST_FIRE_SET_PERFREG	0x121
+
+/* Function numbers for HV_CORE_TRAP.  */
+#define HV_CORE_SET_VER			0x00
+#define HV_CORE_PUTCHAR			0x01
+#define HV_CORE_EXIT			0x02
+#define HV_CORE_GET_VER			0x03
+
+/* Hypervisor API groups for use with HV_CORE_SET_VER and
+ * HV_CORE_GET_VER.
+ */
+#define HV_GRP_SUN4V			0x0000
+#define HV_GRP_CORE			0x0001
+#define HV_GRP_INTR			0x0002
+#define HV_GRP_SOFT_STATE		0x0003
+#define HV_GRP_PCI			0x0100
+#define HV_GRP_LDOM			0x0101
+#define HV_GRP_SVC_CHAN			0x0102
+#define HV_GRP_NCS			0x0103
+#define HV_GRP_RNG			0x0104
+#define HV_GRP_NIAG_PERF		0x0200
+#define HV_GRP_FIRE_PERF		0x0201
+#define HV_GRP_N2_CPU			0x0202
+#define HV_GRP_NIU			0x0204
+#define HV_GRP_VF_CPU			0x0205
+#define HV_GRP_DIAG			0x0300
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_get_version(unsigned long group,
+				       unsigned long *major,
+				       unsigned long *minor);
+extern unsigned long sun4v_set_version(unsigned long group,
+				       unsigned long major,
+				       unsigned long minor,
+				       unsigned long *actual_minor);
+
+extern int sun4v_hvapi_register(unsigned long group, unsigned long major,
+				unsigned long *minor);
+extern void sun4v_hvapi_unregister(unsigned long group);
+extern int sun4v_hvapi_get(unsigned long group,
+			   unsigned long *major,
+			   unsigned long *minor);
+extern void sun4v_hvapi_init(void);
+#endif
+
+#endif /* !(_SPARC64_HYPERVISOR_H) */
diff --git a/arch/sparc/include/asm/ide.h b/arch/sparc/include/asm/ide.h
new file mode 100644
index 0000000..b7af3d6
--- /dev/null
+++ b/arch/sparc/include/asm/ide.h
@@ -0,0 +1,97 @@
+/* ide.h: SPARC PCI specific IDE glue.
+ *
+ * Copyright (C) 1997  David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1998  Eddie C. Dost   (ecd@skynet.be)
+ * Adaptation from sparc64 version to sparc by Pete Zaitcev.
+ */
+
+#ifndef _SPARC_IDE_H
+#define _SPARC_IDE_H
+
+#ifdef __KERNEL__
+
+#include <asm/io.h>
+#ifdef CONFIG_SPARC64
+#include <asm/pgalloc.h>
+#include <asm/spitfire.h>
+#include <asm/cacheflush.h>
+#include <asm/page.h>
+#else
+#include <asm/pgtable.h>
+#include <asm/psr.h>
+#endif
+
+#define __ide_insl(data_reg, buffer, wcount) \
+	__ide_insw(data_reg, buffer, (wcount)<<1)
+#define __ide_outsl(data_reg, buffer, wcount) \
+	__ide_outsw(data_reg, buffer, (wcount)<<1)
+
+/* On sparc, I/O ports and MMIO registers are accessed identically.  */
+#define __ide_mm_insw	__ide_insw
+#define __ide_mm_insl	__ide_insl
+#define __ide_mm_outsw	__ide_outsw
+#define __ide_mm_outsl	__ide_outsl
+
+static inline void __ide_insw(void __iomem *port, void *dst, u32 count)
+{
+#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE)
+	unsigned long end = (unsigned long)dst + (count << 1);
+#endif
+	u16 *ps = dst;
+	u32 *pi;
+
+	if(((unsigned long)ps) & 0x2) {
+		*ps++ = __raw_readw(port);
+		count--;
+	}
+	pi = (u32 *)ps;
+	while(count >= 2) {
+		u32 w;
+
+		w  = __raw_readw(port) << 16;
+		w |= __raw_readw(port);
+		*pi++ = w;
+		count -= 2;
+	}
+	ps = (u16 *)pi;
+	if(count)
+		*ps++ = __raw_readw(port);
+
+#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE)
+	__flush_dcache_range((unsigned long)dst, end);
+#endif
+}
+
+static inline void __ide_outsw(void __iomem *port, const void *src, u32 count)
+{
+#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE)
+	unsigned long end = (unsigned long)src + (count << 1);
+#endif
+	const u16 *ps = src;
+	const u32 *pi;
+
+	if(((unsigned long)src) & 0x2) {
+		__raw_writew(*ps++, port);
+		count--;
+	}
+	pi = (const u32 *)ps;
+	while(count >= 2) {
+		u32 w;
+
+		w = *pi++;
+		__raw_writew((w >> 16), port);
+		__raw_writew(w, port);
+		count -= 2;
+	}
+	ps = (const u16 *)pi;
+	if(count)
+		__raw_writew(*ps, port);
+
+#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE)
+	__flush_dcache_range((unsigned long)src, end);
+#endif
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _SPARC_IDE_H */
diff --git a/arch/sparc/include/asm/idprom.h b/arch/sparc/include/asm/idprom.h
new file mode 100644
index 0000000..6976aa2
--- /dev/null
+++ b/arch/sparc/include/asm/idprom.h
@@ -0,0 +1,25 @@
+/*
+ * idprom.h: Macros and defines for idprom routines
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_IDPROM_H
+#define _SPARC_IDPROM_H
+
+#include <linux/types.h>
+
+struct idprom {
+	u8		id_format;	/* Format identifier (always 0x01) */
+	u8		id_machtype;	/* Machine type */
+	u8		id_ethaddr[6];	/* Hardware ethernet address */
+	s32		id_date;	/* Date of manufacture */
+	u32		id_sernum:24;	/* Unique serial number */
+	u8		id_cksum;	/* Checksum - xor of the data bytes */
+	u8		reserved[16];
+};
+
+extern struct idprom *idprom;
+extern void idprom_init(void);
+
+#endif /* !(_SPARC_IDPROM_H) */
diff --git a/arch/sparc/include/asm/intr_queue.h b/arch/sparc/include/asm/intr_queue.h
new file mode 100644
index 0000000..206077d
--- /dev/null
+++ b/arch/sparc/include/asm/intr_queue.h
@@ -0,0 +1,15 @@
+#ifndef _SPARC64_INTR_QUEUE_H
+#define _SPARC64_INTR_QUEUE_H
+
+/* Sun4v interrupt queue registers, accessed via ASI_QUEUE.  */
+
+#define INTRQ_CPU_MONDO_HEAD	  0x3c0 /* CPU mondo head	          */
+#define INTRQ_CPU_MONDO_TAIL	  0x3c8 /* CPU mondo tail	          */
+#define INTRQ_DEVICE_MONDO_HEAD	  0x3d0 /* Device mondo head	          */
+#define INTRQ_DEVICE_MONDO_TAIL	  0x3d8 /* Device mondo tail	          */
+#define INTRQ_RESUM_MONDO_HEAD	  0x3e0 /* Resumable error mondo head     */
+#define INTRQ_RESUM_MONDO_TAIL	  0x3e8 /* Resumable error mondo tail     */
+#define INTRQ_NONRESUM_MONDO_HEAD 0x3f0 /* Non-resumable error mondo head */
+#define INTRQ_NONRESUM_MONDO_TAIL 0x3f8 /* Non-resumable error mondo head */
+
+#endif /* !(_SPARC64_INTR_QUEUE_H) */
diff --git a/arch/sparc/include/asm/io-unit.h b/arch/sparc/include/asm/io-unit.h
new file mode 100644
index 0000000..96823b4
--- /dev/null
+++ b/arch/sparc/include/asm/io-unit.h
@@ -0,0 +1,62 @@
+/* io-unit.h: Definitions for the sun4d IO-UNIT.
+ *
+ * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+#ifndef _SPARC_IO_UNIT_H
+#define _SPARC_IO_UNIT_H
+
+#include <linux/spinlock.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+/* The io-unit handles all virtual to physical address translations
+ * that occur between the SBUS and physical memory.  Access by
+ * the cpu to IO registers and similar go over the xdbus so are
+ * translated by the on chip SRMMU.  The io-unit and the srmmu do
+ * not need to have the same translations at all, in fact most
+ * of the time the translations they handle are a disjunct set.
+ * Basically the io-unit handles all dvma sbus activity.
+ */
+ 
+/* AIEEE, unlike the nice sun4m, these monsters have 
+   fixed DMA range 64M */
+ 
+#define IOUNIT_DMA_BASE	    0xfc000000 /* TOP - 64M */
+#define IOUNIT_DMA_SIZE	    0x04000000 /* 64M */
+/* We use last 1M for sparc_dvma_malloc */
+#define IOUNIT_DVMA_SIZE    0x00100000 /* 1M */
+
+/* The format of an iopte in the external page tables */
+#define IOUPTE_PAGE          0xffffff00 /* Physical page number (PA[35:12])	*/
+#define IOUPTE_CACHE         0x00000080 /* Cached (in Viking/MXCC)		*/
+/* XXX Jakub, find out how to program SBUS streaming cache on XDBUS/sun4d.
+ * XXX Actually, all you should need to do is find out where the registers
+ * XXX are and copy over the sparc64 implementation I wrote.  There may be
+ * XXX some horrible hwbugs though, so be careful.  -DaveM
+ */
+#define IOUPTE_STREAM        0x00000040 /* Translation can use streaming cache	*/
+#define IOUPTE_INTRA	     0x00000008 /* SBUS direct slot->slot transfer	*/
+#define IOUPTE_WRITE         0x00000004 /* Writeable				*/
+#define IOUPTE_VALID         0x00000002 /* IOPTE is valid			*/
+#define IOUPTE_PARITY        0x00000001 /* Parity is checked during DVMA	*/
+
+struct iounit_struct {
+	unsigned long		bmap[(IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 3)) / sizeof(unsigned long)];
+	spinlock_t		lock;
+	iopte_t			*page_table;
+	unsigned long		rotor[3];
+	unsigned long		limit[4];
+};
+
+#define IOUNIT_BMAP1_START	0x00000000
+#define IOUNIT_BMAP1_END	(IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 1))
+#define IOUNIT_BMAP2_START	IOUNIT_BMAP1_END
+#define IOUNIT_BMAP2_END	IOUNIT_BMAP2_START + (IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 2))
+#define IOUNIT_BMAPM_START	IOUNIT_BMAP2_END
+#define IOUNIT_BMAPM_END	((IOUNIT_DMA_SIZE - IOUNIT_DVMA_SIZE) >> PAGE_SHIFT)
+
+extern __u32 iounit_map_dma_init(struct sbus_bus *, int);
+#define iounit_map_dma_finish(sbus, addr, len) mmu_release_scsi_one(addr, len, sbus)
+extern __u32 iounit_map_dma_page(__u32, void *, struct sbus_bus *);
+
+#endif /* !(_SPARC_IO_UNIT_H) */
diff --git a/arch/sparc/include/asm/io.h b/arch/sparc/include/asm/io.h
new file mode 100644
index 0000000..a34b299
--- /dev/null
+++ b/arch/sparc/include/asm/io.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IO_H
+#define ___ASM_SPARC_IO_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/io_64.h>
+#else
+#include <asm/io_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/io_32.h b/arch/sparc/include/asm/io_32.h
new file mode 100644
index 0000000..10d7da4
--- /dev/null
+++ b/arch/sparc/include/asm/io_32.h
@@ -0,0 +1,326 @@
+#ifndef __SPARC_IO_H
+#define __SPARC_IO_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ioport.h>  /* struct resource */
+
+#include <asm/page.h>      /* IO address mapping routines need this */
+#include <asm/system.h>
+
+#define page_to_phys(page)	(((page) - mem_map) << PAGE_SHIFT)
+
+static inline u32 flip_dword (u32 l)
+{
+	return ((l&0xff)<<24) | (((l>>8)&0xff)<<16) | (((l>>16)&0xff)<<8)| ((l>>24)&0xff);
+}
+
+static inline u16 flip_word (u16 w)
+{
+	return ((w&0xff) << 8) | ((w>>8)&0xff);
+}
+
+#define mmiowb()
+
+/*
+ * Memory mapped I/O to PCI
+ */
+
+static inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+	return *(__force volatile u8 *)addr;
+}
+
+static inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+	return *(__force volatile u16 *)addr;
+}
+
+static inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+	return *(__force volatile u32 *)addr;
+}
+
+static inline void __raw_writeb(u8 b, volatile void __iomem *addr)
+{
+	*(__force volatile u8 *)addr = b;
+}
+
+static inline void __raw_writew(u16 w, volatile void __iomem *addr)
+{
+	*(__force volatile u16 *)addr = w;
+}
+
+static inline void __raw_writel(u32 l, volatile void __iomem *addr)
+{
+	*(__force volatile u32 *)addr = l;
+}
+
+static inline u8 __readb(const volatile void __iomem *addr)
+{
+	return *(__force volatile u8 *)addr;
+}
+
+static inline u16 __readw(const volatile void __iomem *addr)
+{
+	return flip_word(*(__force volatile u16 *)addr);
+}
+
+static inline u32 __readl(const volatile void __iomem *addr)
+{
+	return flip_dword(*(__force volatile u32 *)addr);
+}
+
+static inline void __writeb(u8 b, volatile void __iomem *addr)
+{
+	*(__force volatile u8 *)addr = b;
+}
+
+static inline void __writew(u16 w, volatile void __iomem *addr)
+{
+	*(__force volatile u16 *)addr = flip_word(w);
+}
+
+static inline void __writel(u32 l, volatile void __iomem *addr)
+{
+	*(__force volatile u32 *)addr = flip_dword(l);
+}
+
+#define readb(__addr)		__readb(__addr)
+#define readw(__addr)		__readw(__addr)
+#define readl(__addr)		__readl(__addr)
+#define readb_relaxed(__addr)	readb(__addr)
+#define readw_relaxed(__addr)	readw(__addr)
+#define readl_relaxed(__addr)	readl(__addr)
+
+#define writeb(__b, __addr)	__writeb((__b),(__addr))
+#define writew(__w, __addr)	__writew((__w),(__addr))
+#define writel(__l, __addr)	__writel((__l),(__addr))
+
+/*
+ * I/O space operations
+ *
+ * Arrangement on a Sun is somewhat complicated.
+ *
+ * First of all, we want to use standard Linux drivers
+ * for keyboard, PC serial, etc. These drivers think
+ * they access I/O space and use inb/outb.
+ * On the other hand, EBus bridge accepts PCI *memory*
+ * cycles and converts them into ISA *I/O* cycles.
+ * Ergo, we want inb & outb to generate PCI memory cycles.
+ *
+ * If we want to issue PCI *I/O* cycles, we do this
+ * with a low 64K fixed window in PCIC. This window gets
+ * mapped somewhere into virtual kernel space and we
+ * can use inb/outb again.
+ */
+#define inb_local(__addr)	__readb((void __iomem *)(unsigned long)(__addr))
+#define inb(__addr)		__readb((void __iomem *)(unsigned long)(__addr))
+#define inw(__addr)		__readw((void __iomem *)(unsigned long)(__addr))
+#define inl(__addr)		__readl((void __iomem *)(unsigned long)(__addr))
+
+#define outb_local(__b, __addr)	__writeb(__b, (void __iomem *)(unsigned long)(__addr))
+#define outb(__b, __addr)	__writeb(__b, (void __iomem *)(unsigned long)(__addr))
+#define outw(__w, __addr)	__writew(__w, (void __iomem *)(unsigned long)(__addr))
+#define outl(__l, __addr)	__writel(__l, (void __iomem *)(unsigned long)(__addr))
+
+#define inb_p(__addr)		inb(__addr)
+#define outb_p(__b, __addr)	outb(__b, __addr)
+#define inw_p(__addr)		inw(__addr)
+#define outw_p(__w, __addr)	outw(__w, __addr)
+#define inl_p(__addr)		inl(__addr)
+#define outl_p(__l, __addr)	outl(__l, __addr)
+
+void outsb(unsigned long addr, const void *src, unsigned long cnt);
+void outsw(unsigned long addr, const void *src, unsigned long cnt);
+void outsl(unsigned long addr, const void *src, unsigned long cnt);
+void insb(unsigned long addr, void *dst, unsigned long count);
+void insw(unsigned long addr, void *dst, unsigned long count);
+void insl(unsigned long addr, void *dst, unsigned long count);
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * SBus accessors.
+ *
+ * SBus has only one, memory mapped, I/O space.
+ * We do not need to flip bytes for SBus of course.
+ */
+static inline u8 _sbus_readb(const volatile void __iomem *addr)
+{
+	return *(__force volatile u8 *)addr;
+}
+
+static inline u16 _sbus_readw(const volatile void __iomem *addr)
+{
+	return *(__force volatile u16 *)addr;
+}
+
+static inline u32 _sbus_readl(const volatile void __iomem *addr)
+{
+	return *(__force volatile u32 *)addr;
+}
+
+static inline void _sbus_writeb(u8 b, volatile void __iomem *addr)
+{
+	*(__force volatile u8 *)addr = b;
+}
+
+static inline void _sbus_writew(u16 w, volatile void __iomem *addr)
+{
+	*(__force volatile u16 *)addr = w;
+}
+
+static inline void _sbus_writel(u32 l, volatile void __iomem *addr)
+{
+	*(__force volatile u32 *)addr = l;
+}
+
+/*
+ * The only reason for #define's is to hide casts to unsigned long.
+ */
+#define sbus_readb(__addr)		_sbus_readb(__addr)
+#define sbus_readw(__addr)		_sbus_readw(__addr)
+#define sbus_readl(__addr)		_sbus_readl(__addr)
+#define sbus_writeb(__b, __addr)	_sbus_writeb(__b, __addr)
+#define sbus_writew(__w, __addr)	_sbus_writew(__w, __addr)
+#define sbus_writel(__l, __addr)	_sbus_writel(__l, __addr)
+
+static inline void sbus_memset_io(volatile void __iomem *__dst, int c, __kernel_size_t n)
+{
+	while(n--) {
+		sbus_writeb(c, __dst);
+		__dst++;
+	}
+}
+
+static inline void
+_memset_io(volatile void __iomem *dst, int c, __kernel_size_t n)
+{
+	volatile void __iomem *d = dst;
+
+	while (n--) {
+		writeb(c, d);
+		d++;
+	}
+}
+
+#define memset_io(d,c,sz)	_memset_io(d,c,sz)
+
+static inline void
+_memcpy_fromio(void *dst, const volatile void __iomem *src, __kernel_size_t n)
+{
+	char *d = dst;
+
+	while (n--) {
+		char tmp = readb(src);
+		*d++ = tmp;
+		src++;
+	}
+}
+
+#define memcpy_fromio(d,s,sz)	_memcpy_fromio(d,s,sz)
+
+static inline void
+_memcpy_toio(volatile void __iomem *dst, const void *src, __kernel_size_t n)
+{
+	const char *s = src;
+	volatile void __iomem *d = dst;
+
+	while (n--) {
+		char tmp = *s++;
+		writeb(tmp, d);
+		d++;
+	}
+}
+
+#define memcpy_toio(d,s,sz)	_memcpy_toio(d,s,sz)
+
+#ifdef __KERNEL__
+
+/*
+ * Bus number may be embedded in the higher bits of the physical address.
+ * This is why we have no bus number argument to ioremap().
+ */
+extern void __iomem *ioremap(unsigned long offset, unsigned long size);
+#define ioremap_nocache(X,Y)	ioremap((X),(Y))
+#define ioremap_wc(X,Y)		ioremap((X),(Y))
+extern void iounmap(volatile void __iomem *addr);
+
+#define ioread8(X)			readb(X)
+#define ioread16(X)			readw(X)
+#define ioread32(X)			readl(X)
+#define iowrite8(val,X)			writeb(val,X)
+#define iowrite16(val,X)		writew(val,X)
+#define iowrite32(val,X)		writel(val,X)
+
+static inline void ioread8_rep(void __iomem *port, void *buf, unsigned long count)
+{
+	insb((unsigned long __force)port, buf, count);
+}
+static inline void ioread16_rep(void __iomem *port, void *buf, unsigned long count)
+{
+	insw((unsigned long __force)port, buf, count);
+}
+
+static inline void ioread32_rep(void __iomem *port, void *buf, unsigned long count)
+{
+	insl((unsigned long __force)port, buf, count);
+}
+
+static inline void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+	outsb((unsigned long __force)port, buf, count);
+}
+
+static inline void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+	outsw((unsigned long __force)port, buf, count);
+}
+
+static inline void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+	outsl((unsigned long __force)port, buf, count);
+}
+
+/* Create a virtual mapping cookie for an IO port range */
+extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
+extern void ioport_unmap(void __iomem *);
+
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+
+/*
+ * Bus number may be in res->flags... somewhere.
+ */
+extern void __iomem *sbus_ioremap(struct resource *res, unsigned long offset,
+    unsigned long size, char *name);
+extern void sbus_iounmap(volatile void __iomem *vaddr, unsigned long size);
+
+
+/*
+ * At the moment, we do not use CMOS_READ anywhere outside of rtc.c,
+ * so rtc_port is static in it. This should not change unless a new
+ * hardware pops up.
+ */
+#define RTC_PORT(x)   (rtc_port + (x))
+#define RTC_ALWAYS_BCD  0
+
+#endif
+
+#define __ARCH_HAS_NO_PAGE_ZERO_MAPPED		1
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* !(__SPARC_IO_H) */
diff --git a/arch/sparc/include/asm/io_64.h b/arch/sparc/include/asm/io_64.h
new file mode 100644
index 0000000..0bff078
--- /dev/null
+++ b/arch/sparc/include/asm/io_64.h
@@ -0,0 +1,511 @@
+#ifndef __SPARC64_IO_H
+#define __SPARC64_IO_H
+
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+#include <asm/page.h>      /* IO address mapping routines need this */
+#include <asm/system.h>
+#include <asm/asi.h>
+
+/* PC crapola... */
+#define __SLOW_DOWN_IO	do { } while (0)
+#define SLOW_DOWN_IO	do { } while (0)
+
+/* BIO layer definitions. */
+extern unsigned long kern_base, kern_size;
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+
+static inline u8 _inb(unsigned long addr)
+{
+	u8 ret;
+
+	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_inb */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+
+	return ret;
+}
+
+static inline u16 _inw(unsigned long addr)
+{
+	u16 ret;
+
+	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_inw */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+
+	return ret;
+}
+
+static inline u32 _inl(unsigned long addr)
+{
+	u32 ret;
+
+	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_inl */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+
+	return ret;
+}
+
+static inline void _outb(u8 b, unsigned long addr)
+{
+	__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_outb */"
+			     : /* no outputs */
+			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+}
+
+static inline void _outw(u16 w, unsigned long addr)
+{
+	__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_outw */"
+			     : /* no outputs */
+			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+}
+
+static inline void _outl(u32 l, unsigned long addr)
+{
+	__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_outl */"
+			     : /* no outputs */
+			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+}
+
+#define inb(__addr)		(_inb((unsigned long)(__addr)))
+#define inw(__addr)		(_inw((unsigned long)(__addr)))
+#define inl(__addr)		(_inl((unsigned long)(__addr)))
+#define outb(__b, __addr)	(_outb((u8)(__b), (unsigned long)(__addr)))
+#define outw(__w, __addr)	(_outw((u16)(__w), (unsigned long)(__addr)))
+#define outl(__l, __addr)	(_outl((u32)(__l), (unsigned long)(__addr)))
+
+#define inb_p(__addr) 		inb(__addr)
+#define outb_p(__b, __addr)	outb(__b, __addr)
+#define inw_p(__addr)		inw(__addr)
+#define outw_p(__w, __addr)	outw(__w, __addr)
+#define inl_p(__addr)		inl(__addr)
+#define outl_p(__l, __addr)	outl(__l, __addr)
+
+extern void outsb(unsigned long, const void *, unsigned long);
+extern void outsw(unsigned long, const void *, unsigned long);
+extern void outsl(unsigned long, const void *, unsigned long);
+extern void insb(unsigned long, void *, unsigned long);
+extern void insw(unsigned long, void *, unsigned long);
+extern void insl(unsigned long, void *, unsigned long);
+
+static inline void ioread8_rep(void __iomem *port, void *buf, unsigned long count)
+{
+	insb((unsigned long __force)port, buf, count);
+}
+static inline void ioread16_rep(void __iomem *port, void *buf, unsigned long count)
+{
+	insw((unsigned long __force)port, buf, count);
+}
+
+static inline void ioread32_rep(void __iomem *port, void *buf, unsigned long count)
+{
+	insl((unsigned long __force)port, buf, count);
+}
+
+static inline void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+	outsb((unsigned long __force)port, buf, count);
+}
+
+static inline void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+	outsw((unsigned long __force)port, buf, count);
+}
+
+static inline void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+	outsl((unsigned long __force)port, buf, count);
+}
+
+/* Memory functions, same as I/O accesses on Ultra. */
+static inline u8 _readb(const volatile void __iomem *addr)
+{	u8 ret;
+
+	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_readb */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+	return ret;
+}
+
+static inline u16 _readw(const volatile void __iomem *addr)
+{	u16 ret;
+
+	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_readw */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+
+	return ret;
+}
+
+static inline u32 _readl(const volatile void __iomem *addr)
+{	u32 ret;
+
+	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_readl */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+
+	return ret;
+}
+
+static inline u64 _readq(const volatile void __iomem *addr)
+{	u64 ret;
+
+	__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* pci_readq */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+
+	return ret;
+}
+
+static inline void _writeb(u8 b, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_writeb */"
+			     : /* no outputs */
+			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+}
+
+static inline void _writew(u16 w, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_writew */"
+			     : /* no outputs */
+			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+}
+
+static inline void _writel(u32 l, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_writel */"
+			     : /* no outputs */
+			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+}
+
+static inline void _writeq(u64 q, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* pci_writeq */"
+			     : /* no outputs */
+			     : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+}
+
+#define readb(__addr)		_readb(__addr)
+#define readw(__addr)		_readw(__addr)
+#define readl(__addr)		_readl(__addr)
+#define readq(__addr)		_readq(__addr)
+#define readb_relaxed(__addr)	_readb(__addr)
+#define readw_relaxed(__addr)	_readw(__addr)
+#define readl_relaxed(__addr)	_readl(__addr)
+#define readq_relaxed(__addr)	_readq(__addr)
+#define writeb(__b, __addr)	_writeb(__b, __addr)
+#define writew(__w, __addr)	_writew(__w, __addr)
+#define writel(__l, __addr)	_writel(__l, __addr)
+#define writeq(__q, __addr)	_writeq(__q, __addr)
+
+/* Now versions without byte-swapping. */
+static inline u8 _raw_readb(unsigned long addr)
+{
+	u8 ret;
+
+	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_raw_readb */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline u16 _raw_readw(unsigned long addr)
+{
+	u16 ret;
+
+	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_raw_readw */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline u32 _raw_readl(unsigned long addr)
+{
+	u32 ret;
+
+	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_raw_readl */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline u64 _raw_readq(unsigned long addr)
+{
+	u64 ret;
+
+	__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* pci_raw_readq */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline void _raw_writeb(u8 b, unsigned long addr)
+{
+	__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_raw_writeb */"
+			     : /* no outputs */
+			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _raw_writew(u16 w, unsigned long addr)
+{
+	__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_raw_writew */"
+			     : /* no outputs */
+			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _raw_writel(u32 l, unsigned long addr)
+{
+	__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_raw_writel */"
+			     : /* no outputs */
+			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _raw_writeq(u64 q, unsigned long addr)
+{
+	__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* pci_raw_writeq */"
+			     : /* no outputs */
+			     : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+#define __raw_readb(__addr)		(_raw_readb((unsigned long)(__addr)))
+#define __raw_readw(__addr)		(_raw_readw((unsigned long)(__addr)))
+#define __raw_readl(__addr)		(_raw_readl((unsigned long)(__addr)))
+#define __raw_readq(__addr)		(_raw_readq((unsigned long)(__addr)))
+#define __raw_writeb(__b, __addr)	(_raw_writeb((u8)(__b), (unsigned long)(__addr)))
+#define __raw_writew(__w, __addr)	(_raw_writew((u16)(__w), (unsigned long)(__addr)))
+#define __raw_writel(__l, __addr)	(_raw_writel((u32)(__l), (unsigned long)(__addr)))
+#define __raw_writeq(__q, __addr)	(_raw_writeq((u64)(__q), (unsigned long)(__addr)))
+
+/* Valid I/O Space regions are anywhere, because each PCI bus supported
+ * can live in an arbitrary area of the physical address range.
+ */
+#define IO_SPACE_LIMIT 0xffffffffffffffffUL
+
+/* Now, SBUS variants, only difference from PCI is that we do
+ * not use little-endian ASIs.
+ */
+static inline u8 _sbus_readb(const volatile void __iomem *addr)
+{
+	u8 ret;
+
+	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* sbus_readb */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+
+	return ret;
+}
+
+static inline u16 _sbus_readw(const volatile void __iomem *addr)
+{
+	u16 ret;
+
+	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* sbus_readw */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+
+	return ret;
+}
+
+static inline u32 _sbus_readl(const volatile void __iomem *addr)
+{
+	u32 ret;
+
+	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* sbus_readl */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+
+	return ret;
+}
+
+static inline u64 _sbus_readq(const volatile void __iomem *addr)
+{
+	u64 ret;
+
+	__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* sbus_readq */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+
+	return ret;
+}
+
+static inline void _sbus_writeb(u8 b, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stba\t%r0, [%1] %2\t/* sbus_writeb */"
+			     : /* no outputs */
+			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+}
+
+static inline void _sbus_writew(u16 w, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stha\t%r0, [%1] %2\t/* sbus_writew */"
+			     : /* no outputs */
+			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+}
+
+static inline void _sbus_writel(u32 l, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* sbus_writel */"
+			     : /* no outputs */
+			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+}
+
+static inline void _sbus_writeq(u64 l, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* sbus_writeq */"
+			     : /* no outputs */
+			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+}
+
+#define sbus_readb(__addr)		_sbus_readb(__addr)
+#define sbus_readw(__addr)		_sbus_readw(__addr)
+#define sbus_readl(__addr)		_sbus_readl(__addr)
+#define sbus_readq(__addr)		_sbus_readq(__addr)
+#define sbus_writeb(__b, __addr)	_sbus_writeb(__b, __addr)
+#define sbus_writew(__w, __addr)	_sbus_writew(__w, __addr)
+#define sbus_writel(__l, __addr)	_sbus_writel(__l, __addr)
+#define sbus_writeq(__l, __addr)	_sbus_writeq(__l, __addr)
+
+static inline void _sbus_memset_io(volatile void __iomem *dst, int c, __kernel_size_t n)
+{
+	while(n--) {
+		sbus_writeb(c, dst);
+		dst++;
+	}
+}
+
+#define sbus_memset_io(d,c,sz)	_sbus_memset_io(d,c,sz)
+
+static inline void
+_memset_io(volatile void __iomem *dst, int c, __kernel_size_t n)
+{
+	volatile void __iomem *d = dst;
+
+	while (n--) {
+		writeb(c, d);
+		d++;
+	}
+}
+
+#define memset_io(d,c,sz)	_memset_io(d,c,sz)
+
+static inline void
+_memcpy_fromio(void *dst, const volatile void __iomem *src, __kernel_size_t n)
+{
+	char *d = dst;
+
+	while (n--) {
+		char tmp = readb(src);
+		*d++ = tmp;
+		src++;
+	}
+}
+
+#define memcpy_fromio(d,s,sz)	_memcpy_fromio(d,s,sz)
+
+static inline void
+_memcpy_toio(volatile void __iomem *dst, const void *src, __kernel_size_t n)
+{
+	const char *s = src;
+	volatile void __iomem *d = dst;
+
+	while (n--) {
+		char tmp = *s++;
+		writeb(tmp, d);
+		d++;
+	}
+}
+
+#define memcpy_toio(d,s,sz)	_memcpy_toio(d,s,sz)
+
+#define mmiowb()
+
+#ifdef __KERNEL__
+
+/* On sparc64 we have the whole physical IO address space accessible
+ * using physically addressed loads and stores, so this does nothing.
+ */
+static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
+{
+	return (void __iomem *)offset;
+}
+
+#define ioremap_nocache(X,Y)		ioremap((X),(Y))
+#define ioremap_wc(X,Y)			ioremap((X),(Y))
+
+static inline void iounmap(volatile void __iomem *addr)
+{
+}
+
+#define ioread8(X)			readb(X)
+#define ioread16(X)			readw(X)
+#define ioread32(X)			readl(X)
+#define iowrite8(val,X)			writeb(val,X)
+#define iowrite16(val,X)		writew(val,X)
+#define iowrite32(val,X)		writel(val,X)
+
+/* Create a virtual mapping cookie for an IO port range */
+extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
+extern void ioport_unmap(void __iomem *);
+
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+
+/* Similarly for SBUS. */
+#define sbus_ioremap(__res, __offset, __size, __name) \
+({	unsigned long __ret; \
+	__ret  = (__res)->start + (((__res)->flags & 0x1ffUL) << 32UL); \
+	__ret += (unsigned long) (__offset); \
+	if (! request_region((__ret), (__size), (__name))) \
+		__ret = 0UL; \
+	(void __iomem *) __ret; \
+})
+
+#define sbus_iounmap(__addr, __size)	\
+	release_region((unsigned long)(__addr), (__size))
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif
+
+#endif /* !(__SPARC64_IO_H) */
diff --git a/arch/sparc/include/asm/ioctl.h b/arch/sparc/include/asm/ioctl.h
new file mode 100644
index 0000000..7d6bd51
--- /dev/null
+++ b/arch/sparc/include/asm/ioctl.h
@@ -0,0 +1,67 @@
+#ifndef _SPARC_IOCTL_H
+#define _SPARC_IOCTL_H
+
+/*
+ * Our DIR and SIZE overlap in order to simulteneously provide
+ * a non-zero _IOC_NONE (for binary compatibility) and
+ * 14 bits of size as on i386. Here's the layout:
+ *
+ *   0xE0000000   DIR
+ *   0x80000000     DIR = WRITE
+ *   0x40000000     DIR = READ
+ *   0x20000000     DIR = NONE
+ *   0x3FFF0000   SIZE (overlaps NONE bit)
+ *   0x0000FF00   TYPE
+ *   0x000000FF   NR (CMD)
+ */
+
+#define _IOC_NRBITS      8
+#define _IOC_TYPEBITS    8
+#define _IOC_SIZEBITS   13	/* Actually 14, see below. */
+#define _IOC_DIRBITS     3
+
+#define _IOC_NRMASK      ((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK    ((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK    ((1 << _IOC_SIZEBITS)-1)
+#define _IOC_XSIZEMASK   ((1 << (_IOC_SIZEBITS+1))-1)
+#define _IOC_DIRMASK     ((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT     0
+#define _IOC_TYPESHIFT   (_IOC_NRSHIFT + _IOC_NRBITS)
+#define _IOC_SIZESHIFT   (_IOC_TYPESHIFT + _IOC_TYPEBITS)
+#define _IOC_DIRSHIFT    (_IOC_SIZESHIFT + _IOC_SIZEBITS)
+
+#define _IOC_NONE        1U
+#define _IOC_READ        2U
+#define _IOC_WRITE       4U
+
+#define _IOC(dir,type,nr,size) \
+        (((dir)  << _IOC_DIRSHIFT) | \
+         ((type) << _IOC_TYPESHIFT) | \
+         ((nr)   << _IOC_NRSHIFT) | \
+         ((size) << _IOC_SIZESHIFT))
+
+#define _IO(type,nr)        _IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)  _IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW(type,nr,size)  _IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* Used to decode ioctl numbers in drivers despite the leading underscore... */
+#define _IOC_DIR(nr)    \
+ ( (((((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) & (_IOC_WRITE|_IOC_READ)) != 0)?   \
+                            (((nr) >> _IOC_DIRSHIFT) & (_IOC_WRITE|_IOC_READ)):  \
+                            (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) )
+#define _IOC_TYPE(nr)       (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)         (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)   \
+ ((((((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) & (_IOC_WRITE|_IOC_READ)) == 0)?    \
+                         0: (((nr) >> _IOC_SIZESHIFT) & _IOC_XSIZEMASK))
+
+/* ...and for the PCMCIA and sound. */
+#define IOC_IN          (_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT         (_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT       ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK    (_IOC_XSIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT   (_IOC_SIZESHIFT)
+
+#endif /* !(_SPARC_IOCTL_H) */
diff --git a/arch/sparc/include/asm/ioctls.h b/arch/sparc/include/asm/ioctls.h
new file mode 100644
index 0000000..1fe6855
--- /dev/null
+++ b/arch/sparc/include/asm/ioctls.h
@@ -0,0 +1,136 @@
+#ifndef _ASM_SPARC_IOCTLS_H
+#define _ASM_SPARC_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+/* Big T */
+#define TCGETA		_IOR('T', 1, struct termio)
+#define TCSETA		_IOW('T', 2, struct termio)
+#define TCSETAW		_IOW('T', 3, struct termio)
+#define TCSETAF		_IOW('T', 4, struct termio)
+#define TCSBRK		_IO('T', 5)
+#define TCXONC		_IO('T', 6)
+#define TCFLSH		_IO('T', 7)
+#define TCGETS		_IOR('T', 8, struct termios)
+#define TCSETS		_IOW('T', 9, struct termios)
+#define TCSETSW		_IOW('T', 10, struct termios)
+#define TCSETSF		_IOW('T', 11, struct termios)
+#define TCGETS2		_IOR('T', 12, struct termios2)
+#define TCSETS2		_IOW('T', 13, struct termios2)
+#define TCSETSW2	_IOW('T', 14, struct termios2)
+#define TCSETSF2	_IOW('T', 15, struct termios2)
+
+/* Note that all the ioctls that are not available in Linux have a 
+ * double underscore on the front to: a) avoid some programs to
+ * think we support some ioctls under Linux (autoconfiguration stuff)
+ */
+/* Little t */
+#define TIOCGETD	_IOR('t', 0, int)
+#define TIOCSETD	_IOW('t', 1, int)
+#define __TIOCHPCL        _IO('t', 2) /* SunOS Specific */
+#define __TIOCMODG        _IOR('t', 3, int) /* SunOS Specific */
+#define __TIOCMODS        _IOW('t', 4, int) /* SunOS Specific */
+#define __TIOCGETP        _IOR('t', 8, struct sgttyb) /* SunOS Specific */
+#define __TIOCSETP        _IOW('t', 9, struct sgttyb) /* SunOS Specific */
+#define __TIOCSETN        _IOW('t', 10, struct sgttyb) /* SunOS Specific */
+#define TIOCEXCL	_IO('t', 13)
+#define TIOCNXCL	_IO('t', 14)
+#define __TIOCFLUSH       _IOW('t', 16, int) /* SunOS Specific */
+#define __TIOCSETC        _IOW('t', 17, struct tchars) /* SunOS Specific */
+#define __TIOCGETC        _IOR('t', 18, struct tchars) /* SunOS Specific */
+#define __TIOCTCNTL       _IOW('t', 32, int) /* SunOS Specific */
+#define __TIOCSIGNAL      _IOW('t', 33, int) /* SunOS Specific */
+#define __TIOCSETX        _IOW('t', 34, int) /* SunOS Specific */
+#define __TIOCGETX        _IOR('t', 35, int) /* SunOS Specific */
+#define TIOCCONS	_IO('t', 36)
+#define TIOCGSOFTCAR	_IOR('t', 100, int)
+#define TIOCSSOFTCAR	_IOW('t', 101, int)
+#define __TIOCUCNTL       _IOW('t', 102, int) /* SunOS Specific */
+#define TIOCSWINSZ	_IOW('t', 103, struct winsize)
+#define TIOCGWINSZ	_IOR('t', 104, struct winsize)
+#define __TIOCREMOTE      _IOW('t', 105, int) /* SunOS Specific */
+#define TIOCMGET	_IOR('t', 106, int)
+#define TIOCMBIC	_IOW('t', 107, int)
+#define TIOCMBIS	_IOW('t', 108, int)
+#define TIOCMSET	_IOW('t', 109, int)
+#define TIOCSTART       _IO('t', 110)
+#define TIOCSTOP        _IO('t', 111)
+#define TIOCPKT		_IOW('t', 112, int)
+#define TIOCNOTTY	_IO('t', 113)
+#define TIOCSTI		_IOW('t', 114, char)
+#define TIOCOUTQ	_IOR('t', 115, int)
+#define __TIOCGLTC        _IOR('t', 116, struct ltchars) /* SunOS Specific */
+#define __TIOCSLTC        _IOW('t', 117, struct ltchars) /* SunOS Specific */
+/* 118 is the non-posix setpgrp tty ioctl */
+/* 119 is the non-posix getpgrp tty ioctl */
+#define __TIOCCDTR        _IO('t', 120) /* SunOS Specific */
+#define __TIOCSDTR        _IO('t', 121) /* SunOS Specific */
+#define TIOCCBRK        _IO('t', 122)
+#define TIOCSBRK        _IO('t', 123)
+#define __TIOCLGET        _IOW('t', 124, int) /* SunOS Specific */
+#define __TIOCLSET        _IOW('t', 125, int) /* SunOS Specific */
+#define __TIOCLBIC        _IOW('t', 126, int) /* SunOS Specific */
+#define __TIOCLBIS        _IOW('t', 127, int) /* SunOS Specific */
+#define __TIOCISPACE      _IOR('t', 128, int) /* SunOS Specific */
+#define __TIOCISIZE       _IOR('t', 129, int) /* SunOS Specific */
+#define TIOCSPGRP	_IOW('t', 130, int)
+#define TIOCGPGRP	_IOR('t', 131, int)
+#define TIOCSCTTY	_IO('t', 132)
+#define TIOCGSID	_IOR('t', 133, int)
+/* Get minor device of a pty master's FD -- Solaris equiv is ISPTM */
+#define TIOCGPTN	_IOR('t', 134, unsigned int) /* Get Pty Number */
+#define TIOCSPTLCK	_IOW('t', 135, int) /* Lock/unlock PTY */
+
+/* Little f */
+#define FIOCLEX		_IO('f', 1)
+#define FIONCLEX	_IO('f', 2)
+#define FIOASYNC	_IOW('f', 125, int)
+#define FIONBIO		_IOW('f', 126, int)
+#define FIONREAD	_IOR('f', 127, int)
+#define TIOCINQ		FIONREAD
+#define FIOQSIZE	_IOR('f', 128, loff_t)
+
+/* SCARY Rutgers local SunOS kernel hackery, perhaps I will support it
+ * someday.  This is completely bogus, I know...
+ */
+#define __TCGETSTAT       _IO('T', 200) /* Rutgers specific */
+#define __TCSETSTAT       _IO('T', 201) /* Rutgers specific */
+
+/* Linux specific, no SunOS equivalent. */
+#define TIOCLINUX	0x541C
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TCSBRKP		0x5425
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+#define TIOCMIWAIT	0x545C /* Wait for change on serial input line(s) */
+#define TIOCGICOUNT	0x545D /* Read serial port inline interrupt counts */
+
+/* Kernel definitions */
+#ifdef __KERNEL__
+#define TIOCGETC __TIOCGETC
+#define TIOCGETP __TIOCGETP
+#define TIOCGLTC __TIOCGLTC
+#define TIOCSLTC __TIOCSLTC
+#define TIOCSETP __TIOCSETP
+#define TIOCSETN __TIOCSETN
+#define TIOCSETC __TIOCSETC
+#endif
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#endif /* !(_ASM_SPARC_IOCTLS_H) */
diff --git a/arch/sparc/include/asm/iommu.h b/arch/sparc/include/asm/iommu.h
new file mode 100644
index 0000000..e650965
--- /dev/null
+++ b/arch/sparc/include/asm/iommu.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IOMMU_H
+#define ___ASM_SPARC_IOMMU_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/iommu_64.h>
+#else
+#include <asm/iommu_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/iommu_32.h b/arch/sparc/include/asm/iommu_32.h
new file mode 100644
index 0000000..70c589c
--- /dev/null
+++ b/arch/sparc/include/asm/iommu_32.h
@@ -0,0 +1,121 @@
+/* iommu.h: Definitions for the sun4m IOMMU.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_IOMMU_H
+#define _SPARC_IOMMU_H
+
+#include <asm/page.h>
+#include <asm/bitext.h>
+
+/* The iommu handles all virtual to physical address translations
+ * that occur between the SBUS and physical memory.  Access by
+ * the cpu to IO registers and similar go over the mbus so are
+ * translated by the on chip SRMMU.  The iommu and the srmmu do
+ * not need to have the same translations at all, in fact most
+ * of the time the translations they handle are a disjunct set.
+ * Basically the iommu handles all dvma sbus activity.
+ */
+
+/* The IOMMU registers occupy three pages in IO space. */
+struct iommu_regs {
+	/* First page */
+	volatile unsigned long control;    /* IOMMU control */
+	volatile unsigned long base;       /* Physical base of iopte page table */
+	volatile unsigned long _unused1[3];
+	volatile unsigned long tlbflush;   /* write only */
+	volatile unsigned long pageflush;  /* write only */
+	volatile unsigned long _unused2[1017];
+	/* Second page */
+	volatile unsigned long afsr;       /* Async-fault status register */
+	volatile unsigned long afar;       /* Async-fault physical address */
+	volatile unsigned long _unused3[2];
+	volatile unsigned long sbuscfg0;   /* SBUS configuration registers, per-slot */
+	volatile unsigned long sbuscfg1;
+	volatile unsigned long sbuscfg2;
+	volatile unsigned long sbuscfg3;
+	volatile unsigned long mfsr;       /* Memory-fault status register */
+	volatile unsigned long mfar;       /* Memory-fault physical address */
+	volatile unsigned long _unused4[1014];
+	/* Third page */
+	volatile unsigned long mid;        /* IOMMU module-id */
+};
+
+#define IOMMU_CTRL_IMPL     0xf0000000 /* Implementation */
+#define IOMMU_CTRL_VERS     0x0f000000 /* Version */
+#define IOMMU_CTRL_RNGE     0x0000001c /* Mapping RANGE */
+#define IOMMU_RNGE_16MB     0x00000000 /* 0xff000000 -> 0xffffffff */
+#define IOMMU_RNGE_32MB     0x00000004 /* 0xfe000000 -> 0xffffffff */
+#define IOMMU_RNGE_64MB     0x00000008 /* 0xfc000000 -> 0xffffffff */
+#define IOMMU_RNGE_128MB    0x0000000c /* 0xf8000000 -> 0xffffffff */
+#define IOMMU_RNGE_256MB    0x00000010 /* 0xf0000000 -> 0xffffffff */
+#define IOMMU_RNGE_512MB    0x00000014 /* 0xe0000000 -> 0xffffffff */
+#define IOMMU_RNGE_1GB      0x00000018 /* 0xc0000000 -> 0xffffffff */
+#define IOMMU_RNGE_2GB      0x0000001c /* 0x80000000 -> 0xffffffff */
+#define IOMMU_CTRL_ENAB     0x00000001 /* IOMMU Enable */
+
+#define IOMMU_AFSR_ERR      0x80000000 /* LE, TO, or BE asserted */
+#define IOMMU_AFSR_LE       0x40000000 /* SBUS reports error after transaction */
+#define IOMMU_AFSR_TO       0x20000000 /* Write access took more than 12.8 us. */
+#define IOMMU_AFSR_BE       0x10000000 /* Write access received error acknowledge */
+#define IOMMU_AFSR_SIZE     0x0e000000 /* Size of transaction causing error */
+#define IOMMU_AFSR_S        0x01000000 /* Sparc was in supervisor mode */
+#define IOMMU_AFSR_RESV     0x00f00000 /* Reserver, forced to 0x8 by hardware */
+#define IOMMU_AFSR_ME       0x00080000 /* Multiple errors occurred */
+#define IOMMU_AFSR_RD       0x00040000 /* A read operation was in progress */
+#define IOMMU_AFSR_FAV      0x00020000 /* IOMMU afar has valid contents */
+
+#define IOMMU_SBCFG_SAB30   0x00010000 /* Phys-address bit 30 when bypass enabled */
+#define IOMMU_SBCFG_BA16    0x00000004 /* Slave supports 16 byte bursts */
+#define IOMMU_SBCFG_BA8     0x00000002 /* Slave supports 8 byte bursts */
+#define IOMMU_SBCFG_BYPASS  0x00000001 /* Bypass IOMMU, treat all addresses
+					  produced by this device as pure
+					  physical. */
+
+#define IOMMU_MFSR_ERR      0x80000000 /* One or more of PERR1 or PERR0 */
+#define IOMMU_MFSR_S        0x01000000 /* Sparc was in supervisor mode */
+#define IOMMU_MFSR_CPU      0x00800000 /* CPU transaction caused parity error */
+#define IOMMU_MFSR_ME       0x00080000 /* Multiple parity errors occurred */
+#define IOMMU_MFSR_PERR     0x00006000 /* high bit indicates parity error occurred
+					  on the even word of the access, low bit
+					  indicated odd word caused the parity error */
+#define IOMMU_MFSR_BM       0x00001000 /* Error occurred while in boot mode */
+#define IOMMU_MFSR_C        0x00000800 /* Address causing error was marked cacheable */
+#define IOMMU_MFSR_RTYP     0x000000f0 /* Memory request transaction type */
+
+#define IOMMU_MID_SBAE      0x001f0000 /* SBus arbitration enable */
+#define IOMMU_MID_SE        0x00100000 /* Enables SCSI/ETHERNET arbitration */
+#define IOMMU_MID_SB3       0x00080000 /* Enable SBUS device 3 arbitration */
+#define IOMMU_MID_SB2       0x00040000 /* Enable SBUS device 2 arbitration */
+#define IOMMU_MID_SB1       0x00020000 /* Enable SBUS device 1 arbitration */
+#define IOMMU_MID_SB0       0x00010000 /* Enable SBUS device 0 arbitration */
+#define IOMMU_MID_MID       0x0000000f /* Module-id, hardcoded to 0x8 */
+
+/* The format of an iopte in the page tables */
+#define IOPTE_PAGE          0x07ffff00 /* Physical page number (PA[30:12]) */
+#define IOPTE_CACHE         0x00000080 /* Cached (in vme IOCACHE or Viking/MXCC) */
+#define IOPTE_WRITE         0x00000004 /* Writeable */
+#define IOPTE_VALID         0x00000002 /* IOPTE is valid */
+#define IOPTE_WAZ           0x00000001 /* Write as zeros */
+
+struct iommu_struct {
+	struct iommu_regs *regs;
+	iopte_t *page_table;
+	/* For convenience */
+	unsigned long start; /* First managed virtual address */
+	unsigned long end;   /* Last managed virtual address */
+
+	struct bit_map usemap;
+};
+
+static inline void iommu_invalidate(struct iommu_regs *regs)
+{
+	regs->tlbflush = 0;
+}
+
+static inline void iommu_invalidate_page(struct iommu_regs *regs, unsigned long ba)
+{
+	regs->pageflush = (ba & PAGE_MASK);
+}
+
+#endif /* !(_SPARC_IOMMU_H) */
diff --git a/arch/sparc/include/asm/iommu_64.h b/arch/sparc/include/asm/iommu_64.h
new file mode 100644
index 0000000..d7b9afc
--- /dev/null
+++ b/arch/sparc/include/asm/iommu_64.h
@@ -0,0 +1,62 @@
+/* iommu.h: Definitions for the sun5 IOMMU.
+ *
+ * Copyright (C) 1996, 1999, 2007 David S. Miller (davem@davemloft.net)
+ */
+#ifndef _SPARC64_IOMMU_H
+#define _SPARC64_IOMMU_H
+
+/* The format of an iopte in the page tables. */
+#define IOPTE_VALID   0x8000000000000000UL
+#define IOPTE_64K     0x2000000000000000UL
+#define IOPTE_STBUF   0x1000000000000000UL
+#define IOPTE_INTRA   0x0800000000000000UL
+#define IOPTE_CONTEXT 0x07ff800000000000UL
+#define IOPTE_PAGE    0x00007fffffffe000UL
+#define IOPTE_CACHE   0x0000000000000010UL
+#define IOPTE_WRITE   0x0000000000000002UL
+
+#define IOMMU_NUM_CTXS	4096
+
+struct iommu_arena {
+	unsigned long	*map;
+	unsigned int	hint;
+	unsigned int	limit;
+};
+
+struct iommu {
+	spinlock_t		lock;
+	struct iommu_arena	arena;
+	void			(*flush_all)(struct iommu *);
+	iopte_t			*page_table;
+	u32			page_table_map_base;
+	unsigned long		iommu_control;
+	unsigned long		iommu_tsbbase;
+	unsigned long		iommu_flush;
+	unsigned long		iommu_flushinv;
+	unsigned long		iommu_tags;
+	unsigned long		iommu_ctxflush;
+	unsigned long		write_complete_reg;
+	unsigned long		dummy_page;
+	unsigned long		dummy_page_pa;
+	unsigned long		ctx_lowest_free;
+	DECLARE_BITMAP(ctx_bitmap, IOMMU_NUM_CTXS);
+	u32			dma_addr_mask;
+};
+
+struct strbuf {
+	int			strbuf_enabled;
+	unsigned long		strbuf_control;
+	unsigned long		strbuf_pflush;
+	unsigned long		strbuf_fsync;
+	unsigned long		strbuf_ctxflush;
+	unsigned long		strbuf_ctxmatch_base;
+	unsigned long		strbuf_flushflag_pa;
+	volatile unsigned long *strbuf_flushflag;
+	volatile unsigned long	__flushflag_buf[(64+(64-1)) / sizeof(long)];
+};
+
+extern int iommu_table_init(struct iommu *iommu, int tsbsize,
+			    u32 dma_offset, u32 dma_addr_mask,
+			    int numa_node);
+
+#endif /* !(_SPARC64_IOMMU_H) */
diff --git a/arch/sparc/include/asm/ipcbuf.h b/arch/sparc/include/asm/ipcbuf.h
new file mode 100644
index 0000000..17d6ef7
--- /dev/null
+++ b/arch/sparc/include/asm/ipcbuf.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IPCBUF_H
+#define ___ASM_SPARC_IPCBUF_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/ipcbuf_64.h>
+#else
+#include <asm/ipcbuf_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/ipcbuf_32.h b/arch/sparc/include/asm/ipcbuf_32.h
new file mode 100644
index 0000000..6387209
--- /dev/null
+++ b/arch/sparc/include/asm/ipcbuf_32.h
@@ -0,0 +1,31 @@
+#ifndef _SPARC_IPCBUF_H
+#define _SPARC_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for sparc architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode
+ * - 32-bit seq
+ * - 2 miscellaneous 64-bit values (so that this structure matches
+ *				    sparc64 ipc64_perm)
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	unsigned short		__pad1;
+	__kernel_mode_t		mode;
+	unsigned short		__pad2;
+	unsigned short		seq;
+	unsigned long long	__unused1;
+	unsigned long long	__unused2;
+};
+
+#endif /* _SPARC_IPCBUF_H */
diff --git a/arch/sparc/include/asm/ipcbuf_64.h b/arch/sparc/include/asm/ipcbuf_64.h
new file mode 100644
index 0000000..a44b855
--- /dev/null
+++ b/arch/sparc/include/asm/ipcbuf_64.h
@@ -0,0 +1,28 @@
+#ifndef _SPARC64_IPCBUF_H
+#define _SPARC64_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for sparc64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit seq
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t	key;
+	__kernel_uid_t	uid;
+	__kernel_gid_t	gid;
+	__kernel_uid_t	cuid;
+	__kernel_gid_t	cgid;
+	__kernel_mode_t	mode;
+	unsigned short	__pad1;
+	unsigned short	seq;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _SPARC64_IPCBUF_H */
diff --git a/arch/sparc/include/asm/irq.h b/arch/sparc/include/asm/irq.h
new file mode 100644
index 0000000..3b44a6a
--- /dev/null
+++ b/arch/sparc/include/asm/irq.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IRQ_H
+#define ___ASM_SPARC_IRQ_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/irq_64.h>
+#else
+#include <asm/irq_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/irq_32.h b/arch/sparc/include/asm/irq_32.h
new file mode 100644
index 0000000..fe205cc
--- /dev/null
+++ b/arch/sparc/include/asm/irq_32.h
@@ -0,0 +1,15 @@
+/* irq.h: IRQ registers on the Sparc.
+ *
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC_IRQ_H
+#define _SPARC_IRQ_H
+
+#include <linux/interrupt.h>
+
+#define NR_IRQS    16
+
+#define irq_canonicalize(irq)	(irq)
+
+#endif
diff --git a/arch/sparc/include/asm/irq_64.h b/arch/sparc/include/asm/irq_64.h
new file mode 100644
index 0000000..0bb9bf5
--- /dev/null
+++ b/arch/sparc/include/asm/irq_64.h
@@ -0,0 +1,93 @@
+/* irq.h: IRQ registers on the 64-bit Sparc.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz)
+ */
+
+#ifndef _SPARC64_IRQ_H
+#define _SPARC64_IRQ_H
+
+#include <linux/linkage.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <asm/pil.h>
+#include <asm/ptrace.h>
+
+/* IMAP/ICLR register defines */
+#define IMAP_VALID		0x80000000UL	/* IRQ Enabled		*/
+#define IMAP_TID_UPA		0x7c000000UL	/* UPA TargetID		*/
+#define IMAP_TID_JBUS		0x7c000000UL	/* JBUS TargetID	*/
+#define IMAP_TID_SHIFT		26
+#define IMAP_AID_SAFARI		0x7c000000UL	/* Safari AgentID	*/
+#define IMAP_AID_SHIFT		26
+#define IMAP_NID_SAFARI		0x03e00000UL	/* Safari NodeID	*/
+#define IMAP_NID_SHIFT		21
+#define IMAP_IGN		0x000007c0UL	/* IRQ Group Number	*/
+#define IMAP_INO		0x0000003fUL	/* IRQ Number		*/
+#define IMAP_INR		0x000007ffUL	/* Full interrupt number*/
+
+#define ICLR_IDLE		0x00000000UL	/* Idle state		*/
+#define ICLR_TRANSMIT		0x00000001UL	/* Transmit state	*/
+#define ICLR_PENDING		0x00000003UL	/* Pending state	*/
+
+/* The largest number of unique interrupt sources we support.
+ * If this needs to ever be larger than 255, you need to change
+ * the type of ino_bucket->virt_irq as appropriate.
+ *
+ * ino_bucket->virt_irq allocation is made during {sun4v_,}build_irq().
+ */
+#define NR_IRQS    255
+
+extern void irq_install_pre_handler(int virt_irq,
+				    void (*func)(unsigned int, void *, void *),
+				    void *arg1, void *arg2);
+#define irq_canonicalize(irq)	(irq)
+extern unsigned int build_irq(int inofixup, unsigned long iclr, unsigned long imap);
+extern unsigned int sun4v_build_irq(u32 devhandle, unsigned int devino);
+extern unsigned int sun4v_build_virq(u32 devhandle, unsigned int devino);
+extern unsigned int sun4v_build_msi(u32 devhandle, unsigned int *virt_irq_p,
+				    unsigned int msi_devino_start,
+				    unsigned int msi_devino_end);
+extern void sun4v_destroy_msi(unsigned int virt_irq);
+extern unsigned int sun4u_build_msi(u32 portid, unsigned int *virt_irq_p,
+				    unsigned int msi_devino_start,
+				    unsigned int msi_devino_end,
+				    unsigned long imap_base,
+				    unsigned long iclr_base);
+extern void sun4u_destroy_msi(unsigned int virt_irq);
+extern unsigned int sbus_build_irq(void *sbus, unsigned int ino);
+
+extern unsigned char virt_irq_alloc(unsigned int dev_handle,
+				    unsigned int dev_ino);
+#ifdef CONFIG_PCI_MSI
+extern void virt_irq_free(unsigned int virt_irq);
+#endif
+
+extern void __init init_IRQ(void);
+extern void fixup_irqs(void);
+
+static inline void set_softint(unsigned long bits)
+{
+	__asm__ __volatile__("wr	%0, 0x0, %%set_softint"
+			     : /* No outputs */
+			     : "r" (bits));
+}
+
+static inline void clear_softint(unsigned long bits)
+{
+	__asm__ __volatile__("wr	%0, 0x0, %%clear_softint"
+			     : /* No outputs */
+			     : "r" (bits));
+}
+
+static inline unsigned long get_softint(void)
+{
+	unsigned long retval;
+
+	__asm__ __volatile__("rd	%%softint, %0"
+			     : "=r" (retval));
+	return retval;
+}
+
+#endif
diff --git a/arch/sparc/include/asm/irq_regs.h b/arch/sparc/include/asm/irq_regs.h
new file mode 100644
index 0000000..3dd9c0b
--- /dev/null
+++ b/arch/sparc/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/sparc/include/asm/irqflags.h b/arch/sparc/include/asm/irqflags.h
new file mode 100644
index 0000000..1e13863
--- /dev/null
+++ b/arch/sparc/include/asm/irqflags.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IRQFLAGS_H
+#define ___ASM_SPARC_IRQFLAGS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/irqflags_64.h>
+#else
+#include <asm/irqflags_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/irqflags_32.h b/arch/sparc/include/asm/irqflags_32.h
new file mode 100644
index 0000000..0fca9d9
--- /dev/null
+++ b/arch/sparc/include/asm/irqflags_32.h
@@ -0,0 +1,39 @@
+/*
+ * include/asm/irqflags.h
+ *
+ * IRQ flags handling
+ *
+ * This file gets included from lowlevel asm headers too, to provide
+ * wrapped versions of the local_irq_*() APIs, based on the
+ * raw_local_irq_*() functions from the lowlevel headers.
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#ifndef __ASSEMBLY__
+
+extern void raw_local_irq_restore(unsigned long);
+extern unsigned long __raw_local_irq_save(void);
+extern void raw_local_irq_enable(void);
+
+static inline unsigned long getipl(void)
+{
+        unsigned long retval;
+
+        __asm__ __volatile__("rd        %%psr, %0" : "=r" (retval));
+        return retval;
+}
+
+#define raw_local_save_flags(flags) ((flags) = getipl())
+#define raw_local_irq_save(flags)   ((flags) = __raw_local_irq_save())
+#define raw_local_irq_disable()     ((void) __raw_local_irq_save())
+#define raw_irqs_disabled()         ((getipl() & PSR_PIL) != 0)
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+        return ((flags & PSR_PIL) != 0);
+}
+
+#endif /* (__ASSEMBLY__) */
+
+#endif /* !(_ASM_IRQFLAGS_H) */
diff --git a/arch/sparc/include/asm/irqflags_64.h b/arch/sparc/include/asm/irqflags_64.h
new file mode 100644
index 0000000..bb42e59
--- /dev/null
+++ b/arch/sparc/include/asm/irqflags_64.h
@@ -0,0 +1,89 @@
+/*
+ * include/asm/irqflags.h
+ *
+ * IRQ flags handling
+ *
+ * This file gets included from lowlevel asm headers too, to provide
+ * wrapped versions of the local_irq_*() APIs, based on the
+ * raw_local_irq_*() functions from the lowlevel headers.
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+	unsigned long flags;
+
+	__asm__ __volatile__(
+		"rdpr	%%pil, %0"
+		: "=r" (flags)
+	);
+
+	return flags;
+}
+
+#define raw_local_save_flags(flags) \
+		do { (flags) = __raw_local_save_flags(); } while (0)
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+	__asm__ __volatile__(
+		"wrpr	%0, %%pil"
+		: /* no output */
+		: "r" (flags)
+		: "memory"
+	);
+}
+
+static inline void raw_local_irq_disable(void)
+{
+	__asm__ __volatile__(
+		"wrpr	15, %%pil"
+		: /* no outputs */
+		: /* no inputs */
+		: "memory"
+	);
+}
+
+static inline void raw_local_irq_enable(void)
+{
+	__asm__ __volatile__(
+		"wrpr	0, %%pil"
+		: /* no outputs */
+		: /* no inputs */
+		: "memory"
+	);
+}
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+	return (flags > 0);
+}
+
+static inline int raw_irqs_disabled(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+
+	return raw_irqs_disabled_flags(flags);
+}
+
+/*
+ * For spinlocks, etc:
+ */
+static inline unsigned long __raw_local_irq_save(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+
+	raw_local_irq_disable();
+
+	return flags;
+}
+
+#define raw_local_irq_save(flags) \
+		do { (flags) = __raw_local_irq_save(); } while (0)
+
+#endif /* (__ASSEMBLY__) */
+
+#endif /* !(_ASM_IRQFLAGS_H) */
diff --git a/arch/sparc/include/asm/jsflash.h b/arch/sparc/include/asm/jsflash.h
new file mode 100644
index 0000000..3457f29
--- /dev/null
+++ b/arch/sparc/include/asm/jsflash.h
@@ -0,0 +1,39 @@
+/*
+ * jsflash.h: OS Flash SIMM support for JavaStations.
+ *
+ * Copyright (C) 1999  Pete Zaitcev
+ */
+
+#ifndef _SPARC_JSFLASH_H
+#define _SPARC_JSFLASH_H
+
+#ifndef _SPARC_TYPES_H
+#include <asm/types.h>
+#endif
+
+/*
+ * Semantics of the offset is a full address.
+ * Hardcode it or get it from probe ioctl.
+ *
+ * We use full bus address, so that we would be
+ * automatically compatible with possible future systems.
+ */
+
+#define JSFLASH_IDENT   (('F'<<8)|54)
+struct jsflash_ident_arg {
+	__u64 off;                /* 0x20000000 is included */
+	__u32 size;
+	char name[32];		/* With trailing zero */
+};
+
+#define JSFLASH_ERASE   (('F'<<8)|55)
+/* Put 0 as argument, may be flags or sector number... */
+
+#define JSFLASH_PROGRAM (('F'<<8)|56)
+struct jsflash_program_arg {
+	__u64 data;		/* char* for sparc and sparc64 */
+	__u64 off;
+	__u32 size;
+};
+
+#endif /* _SPARC_JSFLASH_H */
diff --git a/arch/sparc/include/asm/kdebug.h b/arch/sparc/include/asm/kdebug.h
new file mode 100644
index 0000000..8d12581
--- /dev/null
+++ b/arch/sparc/include/asm/kdebug.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_KDEBUG_H
+#define ___ASM_SPARC_KDEBUG_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/kdebug_64.h>
+#else
+#include <asm/kdebug_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/kdebug_32.h b/arch/sparc/include/asm/kdebug_32.h
new file mode 100644
index 0000000..f69fe7d
--- /dev/null
+++ b/arch/sparc/include/asm/kdebug_32.h
@@ -0,0 +1,73 @@
+/*
+ * kdebug.h:  Defines and definitions for debugging the Linux kernel
+ *            under various kernel debuggers.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_KDEBUG_H
+#define _SPARC_KDEBUG_H
+
+#include <asm/openprom.h>
+#include <asm/vaddrs.h>
+
+/* Breakpoints are enter through trap table entry 126.  So in sparc assembly
+ * if you want to drop into the debugger you do:
+ *
+ * t DEBUG_BP_TRAP
+ */
+
+#define DEBUG_BP_TRAP     126
+
+#ifndef __ASSEMBLY__
+/* The debug vector is passed in %o1 at boot time.  It is a pointer to
+ * a structure in the debuggers address space.  Here is its format.
+ */
+
+typedef unsigned int (*debugger_funct)(void);
+
+struct kernel_debug {
+	/* First the entry point into the debugger.  You jump here
+	 * to give control over to the debugger.
+	 */
+	unsigned long kdebug_entry;
+	unsigned long kdebug_trapme;   /* Figure out later... */
+	/* The following is the number of pages that the debugger has
+	 * taken from to total pool.
+	 */
+	unsigned long *kdebug_stolen_pages;
+	/* Ok, after you remap yourself and/or change the trap table
+	 * from what you were left with at boot time you have to call
+	 * this synchronization function so the debugger can check out
+	 * what you have done.
+	 */
+	debugger_funct teach_debugger;
+}; /* I think that is it... */
+
+extern struct kernel_debug *linux_dbvec;
+
+/* Use this macro in C-code to enter the debugger. */
+static inline void sp_enter_debugger(void)
+{
+	__asm__ __volatile__("jmpl %0, %%o7\n\t"
+			     "nop\n\t" : :
+			     "r" (linux_dbvec) : "o7", "memory");
+}
+
+#define SP_ENTER_DEBUGGER do { \
+	     if((linux_dbvec!=0) && ((*(short *)linux_dbvec)!=-1)) \
+	       sp_enter_debugger(); \
+		       } while(0)
+
+enum die_val {
+	DIE_UNUSED,
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+/* Some nice offset defines for assembler code. */
+#define KDEBUG_ENTRY_OFF    0x0
+#define KDEBUG_DUNNO_OFF    0x4
+#define KDEBUG_DUNNO2_OFF   0x8
+#define KDEBUG_TEACH_OFF    0xc
+
+#endif /* !(_SPARC_KDEBUG_H) */
diff --git a/arch/sparc/include/asm/kdebug_64.h b/arch/sparc/include/asm/kdebug_64.h
new file mode 100644
index 0000000..f905b77
--- /dev/null
+++ b/arch/sparc/include/asm/kdebug_64.h
@@ -0,0 +1,19 @@
+#ifndef _SPARC64_KDEBUG_H
+#define _SPARC64_KDEBUG_H
+
+struct pt_regs;
+
+extern void bad_trap(struct pt_regs *, long);
+
+/* Grossly misnamed. */
+enum die_val {
+	DIE_OOPS = 1,
+	DIE_DEBUG,	/* ta 0x70 */
+	DIE_DEBUG_2,	/* ta 0x71 */
+	DIE_DIE,
+	DIE_TRAP,
+	DIE_TRAP_TL1,
+	DIE_CALL,
+};
+
+#endif
diff --git a/arch/sparc/include/asm/kgdb.h b/arch/sparc/include/asm/kgdb.h
new file mode 100644
index 0000000..b6ef301
--- /dev/null
+++ b/arch/sparc/include/asm/kgdb.h
@@ -0,0 +1,38 @@
+#ifndef _SPARC_KGDB_H
+#define _SPARC_KGDB_H
+
+#ifdef CONFIG_SPARC32
+#define BUFMAX			2048
+#else
+#define BUFMAX			4096
+#endif
+
+enum regnames {
+	GDB_G0, GDB_G1, GDB_G2, GDB_G3, GDB_G4, GDB_G5, GDB_G6, GDB_G7,
+	GDB_O0, GDB_O1, GDB_O2, GDB_O3, GDB_O4, GDB_O5, GDB_SP, GDB_O7,
+	GDB_L0, GDB_L1, GDB_L2, GDB_L3, GDB_L4, GDB_L5, GDB_L6, GDB_L7,
+	GDB_I0, GDB_I1, GDB_I2, GDB_I3, GDB_I4, GDB_I5, GDB_FP, GDB_I7,
+	GDB_F0,
+	GDB_F31 = GDB_F0 + 31,
+#ifdef CONFIG_SPARC32
+	GDB_Y, GDB_PSR, GDB_WIM, GDB_TBR, GDB_PC, GDB_NPC,
+	GDB_FSR, GDB_CSR,
+#else
+	GDB_F32 = GDB_F0 + 32,
+	GDB_F62 = GDB_F32 + 15,
+	GDB_PC, GDB_NPC, GDB_STATE, GDB_FSR, GDB_FPRS, GDB_Y,
+#endif
+};
+
+#ifdef CONFIG_SPARC32
+#define NUMREGBYTES		((GDB_CSR + 1) * 4)
+#else
+#define NUMREGBYTES		((GDB_Y + 1) * 8)
+#endif
+
+extern void arch_kgdb_breakpoint(void);
+
+#define BREAK_INSTR_SIZE	4
+#define CACHE_FLUSH_IS_SAFE	1
+
+#endif /* _SPARC_KGDB_H */
diff --git a/arch/sparc/include/asm/kmap_types.h b/arch/sparc/include/asm/kmap_types.h
new file mode 100644
index 0000000..602f5e0
--- /dev/null
+++ b/arch/sparc/include/asm/kmap_types.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+/* Dummy header just to define km_type.  None of this
+ * is actually used on sparc.  -DaveM
+ */
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_TYPE_NR
+};
+
+#endif
diff --git a/arch/sparc/include/asm/kprobes.h b/arch/sparc/include/asm/kprobes.h
new file mode 100644
index 0000000..5879d71
--- /dev/null
+++ b/arch/sparc/include/asm/kprobes.h
@@ -0,0 +1,49 @@
+#ifndef _SPARC64_KPROBES_H
+#define _SPARC64_KPROBES_H
+
+#include <linux/types.h>
+#include <linux/percpu.h>
+
+typedef u32 kprobe_opcode_t;
+
+#define BREAKPOINT_INSTRUCTION   0x91d02070 /* ta 0x70 */
+#define BREAKPOINT_INSTRUCTION_2 0x91d02071 /* ta 0x71 */
+#define MAX_INSN_SIZE 2
+
+#define kretprobe_blacklist_size 0
+
+#define arch_remove_kprobe(p)	do {} while (0)
+
+#define flush_insn_slot(p)		\
+do { 	flushi(&(p)->ainsn.insn[0]);	\
+	flushi(&(p)->ainsn.insn[1]);	\
+} while (0)
+
+void kretprobe_trampoline(void);
+
+/* Architecture specific copy of original instruction*/
+struct arch_specific_insn {
+	/* copy of the original instruction */
+	kprobe_opcode_t insn[MAX_INSN_SIZE];
+};
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned long status;
+	unsigned long orig_tnpc;
+	unsigned long orig_tstate_pil;
+};
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+	unsigned long kprobe_status;
+	unsigned long kprobe_orig_tnpc;
+	unsigned long kprobe_orig_tstate_pil;
+	struct pt_regs jprobe_saved_regs;
+	struct prev_kprobe prev_kprobe;
+};
+
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+				    unsigned long val, void *data);
+extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
+#endif /* _SPARC64_KPROBES_H */
diff --git a/arch/sparc/include/asm/ldc.h b/arch/sparc/include/asm/ldc.h
new file mode 100644
index 0000000..bdb524a
--- /dev/null
+++ b/arch/sparc/include/asm/ldc.h
@@ -0,0 +1,138 @@
+#ifndef _SPARC64_LDC_H
+#define _SPARC64_LDC_H
+
+#include <asm/hypervisor.h>
+
+extern int ldom_domaining_enabled;
+extern void ldom_set_var(const char *var, const char *value);
+extern void ldom_reboot(const char *boot_command);
+extern void ldom_power_off(void);
+
+/* The event handler will be evoked when link state changes
+ * or data becomes available on the receive side.
+ *
+ * For non-RAW links, if the LDC_EVENT_RESET event arrives the
+ * driver should reset all of it's internal state and reinvoke
+ * ldc_connect() to try and bring the link up again.
+ *
+ * For RAW links, ldc_connect() is not used.  Instead the driver
+ * just waits for the LDC_EVENT_UP event.
+ */
+struct ldc_channel_config {
+	void (*event)(void *arg, int event);
+
+	u32			mtu;
+	unsigned int		rx_irq;
+	unsigned int		tx_irq;
+	u8			mode;
+#define LDC_MODE_RAW		0x00
+#define LDC_MODE_UNRELIABLE	0x01
+#define LDC_MODE_RESERVED	0x02
+#define LDC_MODE_STREAM		0x03
+
+	u8			debug;
+#define LDC_DEBUG_HS		0x01
+#define LDC_DEBUG_STATE		0x02
+#define LDC_DEBUG_RX		0x04
+#define LDC_DEBUG_TX		0x08
+#define LDC_DEBUG_DATA		0x10
+};
+
+#define LDC_EVENT_RESET		0x01
+#define LDC_EVENT_UP		0x02
+#define LDC_EVENT_DATA_READY	0x04
+
+#define LDC_STATE_INVALID	0x00
+#define LDC_STATE_INIT		0x01
+#define LDC_STATE_BOUND		0x02
+#define LDC_STATE_READY		0x03
+#define LDC_STATE_CONNECTED	0x04
+
+struct ldc_channel;
+
+/* Allocate state for a channel.  */
+extern struct ldc_channel *ldc_alloc(unsigned long id,
+				     const struct ldc_channel_config *cfgp,
+				     void *event_arg);
+
+/* Shut down and free state for a channel.  */
+extern void ldc_free(struct ldc_channel *lp);
+
+/* Register TX and RX queues of the link with the hypervisor.  */
+extern int ldc_bind(struct ldc_channel *lp, const char *name);
+
+/* For non-RAW protocols we need to complete a handshake before
+ * communication can proceed.  ldc_connect() does that, if the
+ * handshake completes successfully, an LDC_EVENT_UP event will
+ * be sent up to the driver.
+ */
+extern int ldc_connect(struct ldc_channel *lp);
+extern int ldc_disconnect(struct ldc_channel *lp);
+
+extern int ldc_state(struct ldc_channel *lp);
+
+/* Read and write operations.  Only valid when the link is up.  */
+extern int ldc_write(struct ldc_channel *lp, const void *buf,
+		     unsigned int size);
+extern int ldc_read(struct ldc_channel *lp, void *buf, unsigned int size);
+
+#define LDC_MAP_SHADOW	0x01
+#define LDC_MAP_DIRECT	0x02
+#define LDC_MAP_IO	0x04
+#define LDC_MAP_R	0x08
+#define LDC_MAP_W	0x10
+#define LDC_MAP_X	0x20
+#define LDC_MAP_RW	(LDC_MAP_R | LDC_MAP_W)
+#define LDC_MAP_RWX	(LDC_MAP_R | LDC_MAP_W | LDC_MAP_X)
+#define LDC_MAP_ALL	0x03f
+
+struct ldc_trans_cookie {
+	u64			cookie_addr;
+	u64			cookie_size;
+};
+
+struct scatterlist;
+extern int ldc_map_sg(struct ldc_channel *lp,
+		      struct scatterlist *sg, int num_sg,
+		      struct ldc_trans_cookie *cookies, int ncookies,
+		      unsigned int map_perm);
+
+extern int ldc_map_single(struct ldc_channel *lp,
+			  void *buf, unsigned int len,
+			  struct ldc_trans_cookie *cookies, int ncookies,
+			  unsigned int map_perm);
+
+extern void ldc_unmap(struct ldc_channel *lp, struct ldc_trans_cookie *cookies,
+		      int ncookies);
+
+extern int ldc_copy(struct ldc_channel *lp, int copy_dir,
+		    void *buf, unsigned int len, unsigned long offset,
+		    struct ldc_trans_cookie *cookies, int ncookies);
+
+static inline int ldc_get_dring_entry(struct ldc_channel *lp,
+				      void *buf, unsigned int len,
+				      unsigned long offset,
+				      struct ldc_trans_cookie *cookies,
+				      int ncookies)
+{
+	return ldc_copy(lp, LDC_COPY_IN, buf, len, offset, cookies, ncookies);
+}
+
+static inline int ldc_put_dring_entry(struct ldc_channel *lp,
+				      void *buf, unsigned int len,
+				      unsigned long offset,
+				      struct ldc_trans_cookie *cookies,
+				      int ncookies)
+{
+	return ldc_copy(lp, LDC_COPY_OUT, buf, len, offset, cookies, ncookies);
+}
+
+extern void *ldc_alloc_exp_dring(struct ldc_channel *lp, unsigned int len,
+				 struct ldc_trans_cookie *cookies,
+				 int *ncookies, unsigned int map_perm);
+
+extern void ldc_free_exp_dring(struct ldc_channel *lp, void *buf,
+			       unsigned int len,
+			       struct ldc_trans_cookie *cookies, int ncookies);
+
+#endif /* _SPARC64_LDC_H */
diff --git a/arch/sparc/include/asm/linkage.h b/arch/sparc/include/asm/linkage.h
new file mode 100644
index 0000000..291c2d0
--- /dev/null
+++ b/arch/sparc/include/asm/linkage.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+/* Nothing to see here... */
+
+#endif
diff --git a/arch/sparc/include/asm/lmb.h b/arch/sparc/include/asm/lmb.h
new file mode 100644
index 0000000..6a352cb
--- /dev/null
+++ b/arch/sparc/include/asm/lmb.h
@@ -0,0 +1,10 @@
+#ifndef _SPARC64_LMB_H
+#define _SPARC64_LMB_H
+
+#include <asm/oplib.h>
+
+#define LMB_DBG(fmt...) prom_printf(fmt)
+
+#define LMB_REAL_LIMIT	0
+
+#endif /* !(_SPARC64_LMB_H) */
diff --git a/arch/sparc/include/asm/local.h b/arch/sparc/include/asm/local.h
new file mode 100644
index 0000000..bc80815
--- /dev/null
+++ b/arch/sparc/include/asm/local.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC_LOCAL_H
+#define _SPARC_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif
diff --git a/arch/sparc/include/asm/lsu.h b/arch/sparc/include/asm/lsu.h
new file mode 100644
index 0000000..7190f8d
--- /dev/null
+++ b/arch/sparc/include/asm/lsu.h
@@ -0,0 +1,19 @@
+#ifndef _SPARC64_LSU_H
+#define _SPARC64_LSU_H
+
+#include <linux/const.h>
+
+/* LSU Control Register */
+#define LSU_CONTROL_PM _AC(0x000001fe00000000,UL) /* Phys-watchpoint byte mask*/
+#define LSU_CONTROL_VM _AC(0x00000001fe000000,UL) /* Virt-watchpoint byte mask*/
+#define LSU_CONTROL_PR _AC(0x0000000001000000,UL) /* Phys-rd watchpoint enable*/
+#define LSU_CONTROL_PW _AC(0x0000000000800000,UL) /* Phys-wr watchpoint enable*/
+#define LSU_CONTROL_VR _AC(0x0000000000400000,UL) /* Virt-rd watchpoint enable*/
+#define LSU_CONTROL_VW _AC(0x0000000000200000,UL) /* Virt-wr watchpoint enable*/
+#define LSU_CONTROL_FM _AC(0x00000000000ffff0,UL) /* Parity mask enables.     */
+#define LSU_CONTROL_DM _AC(0x0000000000000008,UL) /* Data MMU enable.         */
+#define LSU_CONTROL_IM _AC(0x0000000000000004,UL) /* Instruction MMU enable.  */
+#define LSU_CONTROL_DC _AC(0x0000000000000002,UL) /* Data cache enable.       */
+#define LSU_CONTROL_IC _AC(0x0000000000000001,UL) /* Instruction cache enable.*/
+
+#endif /* !(_SPARC64_LSU_H) */
diff --git a/arch/sparc/include/asm/machines.h b/arch/sparc/include/asm/machines.h
new file mode 100644
index 0000000..c28c2f2
--- /dev/null
+++ b/arch/sparc/include/asm/machines.h
@@ -0,0 +1,67 @@
+/*
+ * machines.h:  Defines for taking apart the machine type value in the
+ *              idprom and determining the kind of machine we are on.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_MACHINES_H
+#define _SPARC_MACHINES_H
+
+struct Sun_Machine_Models {
+	char *name;
+	unsigned char id_machtype;
+};
+
+/* Current number of machines we know about that has an IDPROM
+ * machtype entry including one entry for the 0x80 OBP machines.
+ */
+#define NUM_SUN_MACHINES   15
+
+/* The machine type in the idprom area looks like this:
+ *
+ * ---------------
+ * | ARCH | MACH |
+ * ---------------
+ *  7    4 3    0
+ *
+ * The ARCH field determines the architecture line (sun4, sun4c, etc).
+ * The MACH field determines the machine make within that architecture.
+ */
+
+#define SM_ARCH_MASK  0xf0
+#define SM_SUN4       0x20
+#define SM_SUN4C      0x50
+#define SM_SUN4M      0x70
+#define SM_SUN4M_OBP  0x80
+
+#define SM_TYP_MASK   0x0f
+/* Sun4 machines */
+#define SM_4_260      0x01    /* Sun 4/200 series */
+#define SM_4_110      0x02    /* Sun 4/100 series */
+#define SM_4_330      0x03    /* Sun 4/300 series */
+#define SM_4_470      0x04    /* Sun 4/400 series */
+
+/* Sun4c machines                Full Name              - PROM NAME */
+#define SM_4C_SS1     0x01    /* Sun4c SparcStation 1   - Sun 4/60  */
+#define SM_4C_IPC     0x02    /* Sun4c SparcStation IPC - Sun 4/40  */
+#define SM_4C_SS1PLUS 0x03    /* Sun4c SparcStation 1+  - Sun 4/65  */
+#define SM_4C_SLC     0x04    /* Sun4c SparcStation SLC - Sun 4/20  */
+#define SM_4C_SS2     0x05    /* Sun4c SparcStation 2   - Sun 4/75  */
+#define SM_4C_ELC     0x06    /* Sun4c SparcStation ELC - Sun 4/25  */
+#define SM_4C_IPX     0x07    /* Sun4c SparcStation IPX - Sun 4/50  */
+
+/* Sun4m machines, these predate the OpenBoot.  These values only mean
+ * something if the value in the ARCH field is SM_SUN4M, if it is
+ * SM_SUN4M_OBP then you have the following situation:
+ * 1) You either have a sun4d, a sun4e, or a recently made sun4m.
+ * 2) You have to consult OpenBoot to determine which machine this is.
+ */
+#define SM_4M_SS60    0x01    /* Sun4m SparcSystem 600                  */
+#define SM_4M_SS50    0x02    /* Sun4m SparcStation 10                  */
+#define SM_4M_SS40    0x03    /* Sun4m SparcStation 5                   */
+
+/* Sun4d machines -- N/A */
+/* Sun4e machines -- N/A */
+/* Sun4u machines -- N/A */
+
+#endif /* !(_SPARC_MACHINES_H) */
diff --git a/arch/sparc/include/asm/mbus.h b/arch/sparc/include/asm/mbus.h
new file mode 100644
index 0000000..69f07a0
--- /dev/null
+++ b/arch/sparc/include/asm/mbus.h
@@ -0,0 +1,100 @@
+/*
+ * mbus.h:  Various defines for MBUS modules.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_MBUS_H
+#define _SPARC_MBUS_H
+
+#include <asm/ross.h>    /* HyperSparc stuff */
+#include <asm/cypress.h> /* Cypress Chips */
+#include <asm/viking.h>  /* Ugh, bug city... */
+
+enum mbus_module {
+	HyperSparc        = 0,
+	Cypress           = 1,
+	Cypress_vE        = 2,
+	Cypress_vD        = 3,
+	Swift_ok          = 4,
+	Swift_bad_c       = 5,
+	Swift_lots_o_bugs = 6,
+	Tsunami           = 7,
+	Viking_12         = 8,
+	Viking_2x         = 9,
+	Viking_30         = 10,
+	Viking_35         = 11,
+	Viking_new        = 12,
+	TurboSparc	  = 13,
+	SRMMU_INVAL_MOD   = 14,
+};
+
+extern enum mbus_module srmmu_modtype;
+extern unsigned int viking_rev, swift_rev, cypress_rev;
+
+/* HW Mbus module bugs we have to deal with */
+#define HWBUG_COPYBACK_BROKEN        0x00000001
+#define HWBUG_ASIFLUSH_BROKEN        0x00000002
+#define HWBUG_VACFLUSH_BITROT        0x00000004
+#define HWBUG_KERN_ACCBROKEN         0x00000008
+#define HWBUG_KERN_CBITBROKEN        0x00000010
+#define HWBUG_MODIFIED_BITROT        0x00000020
+#define HWBUG_PC_BADFAULT_ADDR       0x00000040
+#define HWBUG_SUPERSCALAR_BAD        0x00000080
+#define HWBUG_PACINIT_BITROT         0x00000100
+
+/* First the module type values. To find out which you have, just load
+ * the mmu control register from ASI_M_MMUREG alternate address space and
+ * shift the value right 28 bits.
+ */
+/* IMPL field means the company which produced the chip. */
+#define MBUS_VIKING        0x4   /* bleech, Texas Instruments Module */
+#define MBUS_LSI           0x3   /* LSI Logics */
+#define MBUS_ROSS          0x1   /* Ross is nice */
+#define MBUS_FMI           0x0   /* Fujitsu Microelectronics/Swift */
+
+/* Ross Module versions */
+#define ROSS_604_REV_CDE        0x0   /* revisions c, d, and e */
+#define ROSS_604_REV_F          0x1   /* revision f */
+#define ROSS_605                0xf   /* revision a, a.1, and a.2 */
+#define ROSS_605_REV_B          0xe   /* revision b */
+
+/* TI Viking Module versions */
+#define VIKING_REV_12           0x1   /* Version 1.2 or SPARCclassic's CPU */
+#define VIKING_REV_2            0x2   /* Version 2.1, 2.2, 2.3, and 2.4 */
+#define VIKING_REV_30           0x3   /* Version 3.0 */
+#define VIKING_REV_35           0x4   /* Version 3.5 */
+
+/* LSI Logics. */
+#define LSI_L64815		0x0
+
+/* Fujitsu */
+#define FMI_AURORA		0x4   /* MB8690x, a Swift module... */
+#define FMI_TURBO		0x5   /* MB86907, a TurboSparc module... */
+
+/* For multiprocessor support we need to be able to obtain the CPU id and
+ * the MBUS Module id.
+ */
+
+/* The CPU ID is encoded in the trap base register, 20 bits to the left of
+ * bit zero, with 2 bits being significant.
+ */
+#define TBR_ID_SHIFT            20
+
+static inline int get_cpuid(void)
+{
+	register int retval;
+	__asm__ __volatile__("rd %%tbr, %0\n\t"
+			     "srl %0, %1, %0\n\t" :
+			     "=r" (retval) :
+			     "i" (TBR_ID_SHIFT));
+	return (retval & 3);
+}
+
+static inline int get_modid(void)
+{
+	return (get_cpuid() | 0x8);
+}
+
+	
+#endif /* !(_SPARC_MBUS_H) */
diff --git a/arch/sparc/include/asm/mc146818rtc.h b/arch/sparc/include/asm/mc146818rtc.h
new file mode 100644
index 0000000..67ed9e3
--- /dev/null
+++ b/arch/sparc/include/asm/mc146818rtc.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MC146818RTC_H
+#define ___ASM_SPARC_MC146818RTC_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/mc146818rtc_64.h>
+#else
+#include <asm/mc146818rtc_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/mc146818rtc_32.h b/arch/sparc/include/asm/mc146818rtc_32.h
new file mode 100644
index 0000000..fa7eac9
--- /dev/null
+++ b/arch/sparc/include/asm/mc146818rtc_32.h
@@ -0,0 +1,29 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef __ASM_SPARC_MC146818RTC_H
+#define __ASM_SPARC_MC146818RTC_H
+
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#define RTC_IRQ 8
+
+#endif /* __ASM_SPARC_MC146818RTC_H */
diff --git a/arch/sparc/include/asm/mc146818rtc_64.h b/arch/sparc/include/asm/mc146818rtc_64.h
new file mode 100644
index 0000000..e9c0fcc
--- /dev/null
+++ b/arch/sparc/include/asm/mc146818rtc_64.h
@@ -0,0 +1,34 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef __ASM_SPARC64_MC146818RTC_H
+#define __ASM_SPARC64_MC146818RTC_H
+
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#ifdef CONFIG_PCI
+extern unsigned long ds1287_regs;
+#else
+#define ds1287_regs (0UL)
+#endif
+#define RTC_PORT(x)	(ds1287_regs + (x))
+#define RTC_ALWAYS_BCD	0
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#define RTC_IRQ 8
+
+#endif /* __ASM_SPARC64_MC146818RTC_H */
diff --git a/arch/sparc/include/asm/mdesc.h b/arch/sparc/include/asm/mdesc.h
new file mode 100644
index 0000000..1acc727
--- /dev/null
+++ b/arch/sparc/include/asm/mdesc.h
@@ -0,0 +1,78 @@
+#ifndef _SPARC64_MDESC_H
+#define _SPARC64_MDESC_H
+
+#include <linux/types.h>
+#include <linux/cpumask.h>
+#include <asm/prom.h>
+
+struct mdesc_handle;
+
+/* Machine description operations are to be surrounded by grab and
+ * release calls.  The mdesc_handle returned from the grab is
+ * the first argument to all of the operational calls that work
+ * on mdescs.
+ */
+extern struct mdesc_handle *mdesc_grab(void);
+extern void mdesc_release(struct mdesc_handle *);
+
+#define MDESC_NODE_NULL		(~(u64)0)
+
+extern u64 mdesc_node_by_name(struct mdesc_handle *handle,
+			      u64 from_node, const char *name);
+#define mdesc_for_each_node_by_name(__hdl, __node, __name) \
+	for (__node = mdesc_node_by_name(__hdl, MDESC_NODE_NULL, __name); \
+	     (__node) != MDESC_NODE_NULL; \
+	     __node = mdesc_node_by_name(__hdl, __node, __name))
+
+/* Access to property values returned from mdesc_get_property() are
+ * only valid inside of a mdesc_grab()/mdesc_release() sequence.
+ * Once mdesc_release() is called, the memory backed up by these
+ * pointers may reference freed up memory.
+ *
+ * Therefore callers must make copies of any property values
+ * they need.
+ *
+ * These same rules apply to mdesc_node_name().
+ */
+extern const void *mdesc_get_property(struct mdesc_handle *handle,
+				      u64 node, const char *name, int *lenp);
+extern const char *mdesc_node_name(struct mdesc_handle *hp, u64 node);
+
+/* MD arc iteration, the standard sequence is:
+ *
+ *	unsigned long arc;
+ *	mdesc_for_each_arc(arc, handle, node, MDESC_ARC_TYPE_{FWD,BACK}) {
+ *		unsigned long target = mdesc_arc_target(handle, arc);
+ *		...
+ *	}
+ */
+
+#define MDESC_ARC_TYPE_FWD	"fwd"
+#define MDESC_ARC_TYPE_BACK	"back"
+
+extern u64 mdesc_next_arc(struct mdesc_handle *handle, u64 from,
+			  const char *arc_type);
+#define mdesc_for_each_arc(__arc, __hdl, __node, __type) \
+	for (__arc = mdesc_next_arc(__hdl, __node, __type); \
+	     (__arc) != MDESC_NODE_NULL; \
+	     __arc = mdesc_next_arc(__hdl, __arc, __type))
+
+extern u64 mdesc_arc_target(struct mdesc_handle *hp, u64 arc);
+
+extern void mdesc_update(void);
+
+struct mdesc_notifier_client {
+	void (*add)(struct mdesc_handle *handle, u64 node);
+	void (*remove)(struct mdesc_handle *handle, u64 node);
+
+	const char			*node_name;
+	struct mdesc_notifier_client	*next;
+};
+
+extern void mdesc_register_notifier(struct mdesc_notifier_client *client);
+
+extern void mdesc_fill_in_cpu_data(cpumask_t mask);
+
+extern void sun4v_mdesc_init(void);
+
+#endif
diff --git a/arch/sparc/include/asm/memreg.h b/arch/sparc/include/asm/memreg.h
new file mode 100644
index 0000000..845ad2b
--- /dev/null
+++ b/arch/sparc/include/asm/memreg.h
@@ -0,0 +1,51 @@
+#ifndef _SPARC_MEMREG_H
+#define _SPARC_MEMREG_H
+/* memreg.h:  Definitions of the values found in the synchronous
+ *            and asynchronous memory error registers when a fault
+ *            occurs on the sun4c.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* First the synchronous error codes, these are usually just
+ * normal page faults.
+ */
+
+#define SUN4C_SYNC_WDRESET   0x0001  /* watchdog reset */
+#define SUN4C_SYNC_SIZE      0x0002  /* bad access size? whuz this? */
+#define SUN4C_SYNC_PARITY    0x0008  /* bad ram chips caused a parity error */
+#define SUN4C_SYNC_SBUS      0x0010  /* the SBUS had some problems... */
+#define SUN4C_SYNC_NOMEM     0x0020  /* translation to non-existent ram */
+#define SUN4C_SYNC_PROT      0x0040  /* access violated pte protections */
+#define SUN4C_SYNC_NPRESENT  0x0080  /* pte said that page was not present */
+#define SUN4C_SYNC_BADWRITE  0x8000  /* while writing something went bogus */
+
+#define SUN4C_SYNC_BOLIXED  \
+        (SUN4C_SYNC_WDRESET | SUN4C_SYNC_SIZE | SUN4C_SYNC_SBUS | \
+         SUN4C_SYNC_NOMEM | SUN4C_SYNC_PARITY)
+
+/* Now the asynchronous error codes, these are almost always produced
+ * by the cache writing things back to memory and getting a bad translation.
+ * Bad DVMA transactions can cause these faults too.
+ */
+
+#define SUN4C_ASYNC_BADDVMA 0x0010  /* error during DVMA access */
+#define SUN4C_ASYNC_NOMEM   0x0020  /* write back pointed to bad phys addr */
+#define SUN4C_ASYNC_BADWB   0x0080  /* write back points to non-present page */
+
+/* Memory parity error register with associated bit constants. */
+#ifndef __ASSEMBLY__
+extern __volatile__ unsigned long __iomem *sun4c_memerr_reg;
+#endif
+
+#define	SUN4C_MPE_ERROR	0x80	/* Parity error detected. (ro) */
+#define	SUN4C_MPE_MULTI	0x40	/* Multiple parity errors detected. (ro) */
+#define	SUN4C_MPE_TEST	0x20	/* Write inverse parity. (rw) */
+#define	SUN4C_MPE_CHECK	0x10	/* Enable parity checking. (rw) */
+#define	SUN4C_MPE_ERR00	0x08	/* Parity error in bits 0-7. (ro) */
+#define	SUN4C_MPE_ERR08	0x04	/* Parity error in bits 8-15. (ro) */
+#define	SUN4C_MPE_ERR16	0x02	/* Parity error in bits 16-23. (ro) */
+#define	SUN4C_MPE_ERR24	0x01	/* Parity error in bits 24-31. (ro) */
+#define	SUN4C_MPE_ERRS	0x0F	/* Bit mask for the error bits. (ro) */
+
+#endif /* !(_SPARC_MEMREG_H) */
diff --git a/arch/sparc/include/asm/mman.h b/arch/sparc/include/asm/mman.h
new file mode 100644
index 0000000..fdfbbf0
--- /dev/null
+++ b/arch/sparc/include/asm/mman.h
@@ -0,0 +1,31 @@
+#ifndef __SPARC_MMAN_H__
+#define __SPARC_MMAN_H__
+
+#include <asm-generic/mman.h>
+
+/* SunOS'ified... */
+
+#define MAP_RENAME      MAP_ANONYMOUS   /* In SunOS terminology */
+#define MAP_NORESERVE   0x40            /* don't reserve swap pages */
+#define MAP_INHERIT     0x80            /* SunOS doesn't do this, but... */
+#define MAP_LOCKED      0x100           /* lock the mapping */
+#define _MAP_NEW        0x80000000      /* Binary compatibility is fun... */
+
+#define MAP_GROWSDOWN	0x0200		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+
+#define MCL_CURRENT     0x2000          /* lock all currently mapped pages */
+#define MCL_FUTURE      0x4000          /* lock all additions to address space */
+
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#define arch_mmap_check(addr,len,flags)	sparc_mmap_check(addr,len)
+int sparc_mmap_check(unsigned long addr, unsigned long len);
+#endif
+#endif
+
+#endif /* __SPARC_MMAN_H__ */
diff --git a/arch/sparc/include/asm/mmu.h b/arch/sparc/include/asm/mmu.h
new file mode 100644
index 0000000..88fa313
--- /dev/null
+++ b/arch/sparc/include/asm/mmu.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MMU_H
+#define ___ASM_SPARC_MMU_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/mmu_64.h>
+#else
+#include <asm/mmu_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/mmu_32.h b/arch/sparc/include/asm/mmu_32.h
new file mode 100644
index 0000000..ccd36d2
--- /dev/null
+++ b/arch/sparc/include/asm/mmu_32.h
@@ -0,0 +1,7 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+#endif
diff --git a/arch/sparc/include/asm/mmu_64.h b/arch/sparc/include/asm/mmu_64.h
new file mode 100644
index 0000000..9067dc5
--- /dev/null
+++ b/arch/sparc/include/asm/mmu_64.h
@@ -0,0 +1,123 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+#include <linux/const.h>
+#include <asm/page.h>
+#include <asm/hypervisor.h>
+
+#define CTX_NR_BITS		13
+
+#define TAG_CONTEXT_BITS	((_AC(1,UL) << CTX_NR_BITS) - _AC(1,UL))
+
+/* UltraSPARC-III+ and later have a feature whereby you can
+ * select what page size the various Data-TLB instances in the
+ * chip.  In order to gracefully support this, we put the version
+ * field in a spot outside of the areas of the context register
+ * where this parameter is specified.
+ */
+#define CTX_VERSION_SHIFT	22
+#define CTX_VERSION_MASK	((~0UL) << CTX_VERSION_SHIFT)
+
+#define CTX_PGSZ_8KB		_AC(0x0,UL)
+#define CTX_PGSZ_64KB		_AC(0x1,UL)
+#define CTX_PGSZ_512KB		_AC(0x2,UL)
+#define CTX_PGSZ_4MB		_AC(0x3,UL)
+#define CTX_PGSZ_BITS		_AC(0x7,UL)
+#define CTX_PGSZ0_NUC_SHIFT	61
+#define CTX_PGSZ1_NUC_SHIFT	58
+#define CTX_PGSZ0_SHIFT		16
+#define CTX_PGSZ1_SHIFT		19
+#define CTX_PGSZ_MASK		((CTX_PGSZ_BITS << CTX_PGSZ0_SHIFT) | \
+				 (CTX_PGSZ_BITS << CTX_PGSZ1_SHIFT))
+
+#if defined(CONFIG_SPARC64_PAGE_SIZE_8KB)
+#define CTX_PGSZ_BASE	CTX_PGSZ_8KB
+#elif defined(CONFIG_SPARC64_PAGE_SIZE_64KB)
+#define CTX_PGSZ_BASE	CTX_PGSZ_64KB
+#else
+#error No page size specified in kernel configuration
+#endif
+
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#define CTX_PGSZ_HUGE		CTX_PGSZ_4MB
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K)
+#define CTX_PGSZ_HUGE		CTX_PGSZ_512KB
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define CTX_PGSZ_HUGE		CTX_PGSZ_64KB
+#endif
+
+#define CTX_PGSZ_KERN	CTX_PGSZ_4MB
+
+/* Thus, when running on UltraSPARC-III+ and later, we use the following
+ * PRIMARY_CONTEXT register values for the kernel context.
+ */
+#define CTX_CHEETAH_PLUS_NUC \
+	((CTX_PGSZ_KERN << CTX_PGSZ0_NUC_SHIFT) | \
+	 (CTX_PGSZ_BASE << CTX_PGSZ1_NUC_SHIFT))
+
+#define CTX_CHEETAH_PLUS_CTX0 \
+	((CTX_PGSZ_KERN << CTX_PGSZ0_SHIFT) | \
+	 (CTX_PGSZ_BASE << CTX_PGSZ1_SHIFT))
+
+/* If you want "the TLB context number" use CTX_NR_MASK.  If you
+ * want "the bits I program into the context registers" use
+ * CTX_HW_MASK.
+ */
+#define CTX_NR_MASK		TAG_CONTEXT_BITS
+#define CTX_HW_MASK		(CTX_NR_MASK | CTX_PGSZ_MASK)
+
+#define CTX_FIRST_VERSION	((_AC(1,UL) << CTX_VERSION_SHIFT) + _AC(1,UL))
+#define CTX_VALID(__ctx)	\
+	 (!(((__ctx.sparc64_ctx_val) ^ tlb_context_cache) & CTX_VERSION_MASK))
+#define CTX_HWBITS(__ctx)	((__ctx.sparc64_ctx_val) & CTX_HW_MASK)
+#define CTX_NRBITS(__ctx)	((__ctx.sparc64_ctx_val) & CTX_NR_MASK)
+
+#ifndef __ASSEMBLY__
+
+#define TSB_ENTRY_ALIGNMENT	16
+
+struct tsb {
+	unsigned long tag;
+	unsigned long pte;
+} __attribute__((aligned(TSB_ENTRY_ALIGNMENT)));
+
+extern void __tsb_insert(unsigned long ent, unsigned long tag, unsigned long pte);
+extern void tsb_flush(unsigned long ent, unsigned long tag);
+extern void tsb_init(struct tsb *tsb, unsigned long size);
+
+struct tsb_config {
+	struct tsb		*tsb;
+	unsigned long		tsb_rss_limit;
+	unsigned long		tsb_nentries;
+	unsigned long		tsb_reg_val;
+	unsigned long		tsb_map_vaddr;
+	unsigned long		tsb_map_pte;
+};
+
+#define MM_TSB_BASE	0
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define MM_TSB_HUGE	1
+#define MM_NUM_TSBS	2
+#else
+#define MM_NUM_TSBS	1
+#endif
+
+typedef struct {
+	spinlock_t		lock;
+	unsigned long		sparc64_ctx_val;
+	unsigned long		huge_pte_count;
+	struct tsb_config	tsb_block[MM_NUM_TSBS];
+	struct hv_tsb_descr	tsb_descr[MM_NUM_TSBS];
+} mm_context_t;
+
+#endif /* !__ASSEMBLY__ */
+
+#define TSB_CONFIG_TSB		0x00
+#define TSB_CONFIG_RSS_LIMIT	0x08
+#define TSB_CONFIG_NENTRIES	0x10
+#define TSB_CONFIG_REG_VAL	0x18
+#define TSB_CONFIG_MAP_VADDR	0x20
+#define TSB_CONFIG_MAP_PTE	0x28
+
+#endif /* __MMU_H */
diff --git a/arch/sparc/include/asm/mmu_context.h b/arch/sparc/include/asm/mmu_context.h
new file mode 100644
index 0000000..5531346
--- /dev/null
+++ b/arch/sparc/include/asm/mmu_context.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MMU_CONTEXT_H
+#define ___ASM_SPARC_MMU_CONTEXT_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/mmu_context_64.h>
+#else
+#include <asm/mmu_context_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/mmu_context_32.h b/arch/sparc/include/asm/mmu_context_32.h
new file mode 100644
index 0000000..671a997b
--- /dev/null
+++ b/arch/sparc/include/asm/mmu_context_32.h
@@ -0,0 +1,42 @@
+#ifndef __SPARC_MMU_CONTEXT_H
+#define __SPARC_MMU_CONTEXT_H
+
+#include <asm/btfixup.h>
+
+#ifndef __ASSEMBLY__
+
+#include <asm-generic/mm_hooks.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ * Initialize a new mmu context.  This is invoked when a new
+ * address space instance (unique or shared) is instantiated.
+ */
+#define init_new_context(tsk, mm) (((mm)->context = NO_CONTEXT), 0)
+
+/*
+ * Destroy a dead context.  This occurs when mmput drops the
+ * mm_users count to zero, the mmaps have been released, and
+ * all the page tables have been flushed.  Our job is to destroy
+ * any remaining processor-specific state.
+ */
+BTFIXUPDEF_CALL(void, destroy_context, struct mm_struct *)
+
+#define destroy_context(mm) BTFIXUP_CALL(destroy_context)(mm)
+
+/* Switch the current MM context. */
+BTFIXUPDEF_CALL(void, switch_mm, struct mm_struct *, struct mm_struct *, struct task_struct *)
+
+#define switch_mm(old_mm, mm, tsk) BTFIXUP_CALL(switch_mm)(old_mm, mm, tsk)
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+/* Activate a new MM instance for the current task. */
+#define activate_mm(active_mm, mm) switch_mm((active_mm), (mm), NULL)
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC_MMU_CONTEXT_H) */
diff --git a/arch/sparc/include/asm/mmu_context_64.h b/arch/sparc/include/asm/mmu_context_64.h
new file mode 100644
index 0000000..5693ab4
--- /dev/null
+++ b/arch/sparc/include/asm/mmu_context_64.h
@@ -0,0 +1,155 @@
+#ifndef __SPARC64_MMU_CONTEXT_H
+#define __SPARC64_MMU_CONTEXT_H
+
+/* Derived heavily from Linus's Alpha/AXP ASN code... */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/spinlock.h>
+#include <asm/system.h>
+#include <asm/spitfire.h>
+#include <asm-generic/mm_hooks.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+extern spinlock_t ctx_alloc_lock;
+extern unsigned long tlb_context_cache;
+extern unsigned long mmu_context_bmap[];
+
+extern void get_new_mmu_context(struct mm_struct *mm);
+#ifdef CONFIG_SMP
+extern void smp_new_mmu_context_version(void);
+#else
+#define smp_new_mmu_context_version() do { } while (0)
+#endif
+
+extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+extern void destroy_context(struct mm_struct *mm);
+
+extern void __tsb_context_switch(unsigned long pgd_pa,
+				 struct tsb_config *tsb_base,
+				 struct tsb_config *tsb_huge,
+				 unsigned long tsb_descr_pa);
+
+static inline void tsb_context_switch(struct mm_struct *mm)
+{
+	__tsb_context_switch(__pa(mm->pgd),
+			     &mm->context.tsb_block[0],
+#ifdef CONFIG_HUGETLB_PAGE
+			     (mm->context.tsb_block[1].tsb ?
+			      &mm->context.tsb_block[1] :
+			      NULL)
+#else
+			     NULL
+#endif
+			     , __pa(&mm->context.tsb_descr[0]));
+}
+
+extern void tsb_grow(struct mm_struct *mm, unsigned long tsb_index, unsigned long mm_rss);
+#ifdef CONFIG_SMP
+extern void smp_tsb_sync(struct mm_struct *mm);
+#else
+#define smp_tsb_sync(__mm) do { } while (0)
+#endif
+
+/* Set MMU context in the actual hardware. */
+#define load_secondary_context(__mm) \
+	__asm__ __volatile__( \
+	"\n661:	stxa		%0, [%1] %2\n" \
+	"	.section	.sun4v_1insn_patch, \"ax\"\n" \
+	"	.word		661b\n" \
+	"	stxa		%0, [%1] %3\n" \
+	"	.previous\n" \
+	"	flush		%%g6\n" \
+	: /* No outputs */ \
+	: "r" (CTX_HWBITS((__mm)->context)), \
+	  "r" (SECONDARY_CONTEXT), "i" (ASI_DMMU), "i" (ASI_MMU))
+
+extern void __flush_tlb_mm(unsigned long, unsigned long);
+
+/* Switch the current MM context.  Interrupts are disabled.  */
+static inline void switch_mm(struct mm_struct *old_mm, struct mm_struct *mm, struct task_struct *tsk)
+{
+	unsigned long ctx_valid, flags;
+	int cpu;
+
+	if (unlikely(mm == &init_mm))
+		return;
+
+	spin_lock_irqsave(&mm->context.lock, flags);
+	ctx_valid = CTX_VALID(mm->context);
+	if (!ctx_valid)
+		get_new_mmu_context(mm);
+
+	/* We have to be extremely careful here or else we will miss
+	 * a TSB grow if we switch back and forth between a kernel
+	 * thread and an address space which has it's TSB size increased
+	 * on another processor.
+	 *
+	 * It is possible to play some games in order to optimize the
+	 * switch, but the safest thing to do is to unconditionally
+	 * perform the secondary context load and the TSB context switch.
+	 *
+	 * For reference the bad case is, for address space "A":
+	 *
+	 *		CPU 0			CPU 1
+	 *	run address space A
+	 *	set cpu0's bits in cpu_vm_mask
+	 *	switch to kernel thread, borrow
+	 *	address space A via entry_lazy_tlb
+	 *					run address space A
+	 *					set cpu1's bit in cpu_vm_mask
+	 *					flush_tlb_pending()
+	 *					reset cpu_vm_mask to just cpu1
+	 *					TSB grow
+	 *	run address space A
+	 *	context was valid, so skip
+	 *	TSB context switch
+	 *
+	 * At that point cpu0 continues to use a stale TSB, the one from
+	 * before the TSB grow performed on cpu1.  cpu1 did not cross-call
+	 * cpu0 to update it's TSB because at that point the cpu_vm_mask
+	 * only had cpu1 set in it.
+	 */
+	load_secondary_context(mm);
+	tsb_context_switch(mm);
+
+	/* Any time a processor runs a context on an address space
+	 * for the first time, we must flush that context out of the
+	 * local TLB.
+	 */
+	cpu = smp_processor_id();
+	if (!ctx_valid || !cpu_isset(cpu, mm->cpu_vm_mask)) {
+		cpu_set(cpu, mm->cpu_vm_mask);
+		__flush_tlb_mm(CTX_HWBITS(mm->context),
+			       SECONDARY_CONTEXT);
+	}
+	spin_unlock_irqrestore(&mm->context.lock, flags);
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+/* Activate a new MM instance for the current task. */
+static inline void activate_mm(struct mm_struct *active_mm, struct mm_struct *mm)
+{
+	unsigned long flags;
+	int cpu;
+
+	spin_lock_irqsave(&mm->context.lock, flags);
+	if (!CTX_VALID(mm->context))
+		get_new_mmu_context(mm);
+	cpu = smp_processor_id();
+	if (!cpu_isset(cpu, mm->cpu_vm_mask))
+		cpu_set(cpu, mm->cpu_vm_mask);
+
+	load_secondary_context(mm);
+	__flush_tlb_mm(CTX_HWBITS(mm->context), SECONDARY_CONTEXT);
+	tsb_context_switch(mm);
+	spin_unlock_irqrestore(&mm->context.lock, flags);
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC64_MMU_CONTEXT_H) */
diff --git a/arch/sparc/include/asm/mmzone.h b/arch/sparc/include/asm/mmzone.h
new file mode 100644
index 0000000..ebf5986
--- /dev/null
+++ b/arch/sparc/include/asm/mmzone.h
@@ -0,0 +1,17 @@
+#ifndef _SPARC64_MMZONE_H
+#define _SPARC64_MMZONE_H
+
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+
+extern struct pglist_data *node_data[];
+
+#define NODE_DATA(nid)		(node_data[nid])
+#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
+#define node_end_pfn(nid)	(NODE_DATA(nid)->node_end_pfn)
+
+extern int numa_cpu_lookup_table[];
+extern cpumask_t numa_cpumask_lookup_table[];
+
+#endif /* CONFIG_NEED_MULTIPLE_NODES */
+
+#endif /* _SPARC64_MMZONE_H */
diff --git a/arch/sparc/include/asm/module.h b/arch/sparc/include/asm/module.h
new file mode 100644
index 0000000..e82cf9a
--- /dev/null
+++ b/arch/sparc/include/asm/module.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MODULE_H
+#define ___ASM_SPARC_MODULE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/module_64.h>
+#else
+#include <asm/module_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/module_32.h b/arch/sparc/include/asm/module_32.h
new file mode 100644
index 0000000..cbd9e67
--- /dev/null
+++ b/arch/sparc/include/asm/module_32.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_SPARC_MODULE_H
+#define _ASM_SPARC_MODULE_H
+struct mod_arch_specific { };
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+#endif /* _ASM_SPARC_MODULE_H */
diff --git a/arch/sparc/include/asm/module_64.h b/arch/sparc/include/asm/module_64.h
new file mode 100644
index 0000000..3d77ba4
--- /dev/null
+++ b/arch/sparc/include/asm/module_64.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_SPARC64_MODULE_H
+#define _ASM_SPARC64_MODULE_H
+struct mod_arch_specific { };
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Sym Elf64_Sym
+#define Elf_Ehdr Elf64_Ehdr
+#endif /* _ASM_SPARC64_MODULE_H */
diff --git a/arch/sparc/include/asm/mostek.h b/arch/sparc/include/asm/mostek.h
new file mode 100644
index 0000000..433be3e
--- /dev/null
+++ b/arch/sparc/include/asm/mostek.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MOSTEK_H
+#define ___ASM_SPARC_MOSTEK_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/mostek_64.h>
+#else
+#include <asm/mostek_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/mostek_32.h b/arch/sparc/include/asm/mostek_32.h
new file mode 100644
index 0000000..a99590c
--- /dev/null
+++ b/arch/sparc/include/asm/mostek_32.h
@@ -0,0 +1,171 @@
+/*
+ * mostek.h:  Describes the various Mostek time of day clock registers.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ * Added intersil code 05/25/98 Chris Davis (cdavis@cois.on.ca)
+ */
+
+#ifndef _SPARC_MOSTEK_H
+#define _SPARC_MOSTEK_H
+
+#include <asm/idprom.h>
+#include <asm/io.h>
+
+/*       M48T02 Register Map (adapted from Sun NVRAM/Hostid FAQ)
+ *
+ *                             Data
+ * Address                                                 Function
+ *        Bit 7 Bit 6 Bit 5 Bit 4Bit 3 Bit 2 Bit 1 Bit 0
+ *   7ff  -     -     -     -    -     -     -     -       Year 00-99
+ *   7fe  0     0     0     -    -     -     -     -      Month 01-12
+ *   7fd  0     0     -     -    -     -     -     -       Date 01-31
+ *   7fc  0     FT    0     0    0     -     -     -        Day 01-07
+ *   7fb  KS    0     -     -    -     -     -     -      Hours 00-23
+ *   7fa  0     -     -     -    -     -     -     -    Minutes 00-59
+ *   7f9  ST    -     -     -    -     -     -     -    Seconds 00-59
+ *   7f8  W     R     S     -    -     -     -     -    Control
+ *
+ *   * ST is STOP BIT
+ *   * W is WRITE BIT
+ *   * R is READ BIT
+ *   * S is SIGN BIT
+ *   * FT is FREQ TEST BIT
+ *   * KS is KICK START BIT
+ */
+
+/* The Mostek 48t02 real time clock and NVRAM chip. The registers
+ * other than the control register are in binary coded decimal. Some
+ * control bits also live outside the control register.
+ */
+#define mostek_read(_addr)		readb(_addr)
+#define mostek_write(_addr,_val)	writeb(_val, _addr)
+#define MOSTEK_EEPROM		0x0000UL
+#define MOSTEK_IDPROM		0x07d8UL
+#define MOSTEK_CREG		0x07f8UL
+#define MOSTEK_SEC		0x07f9UL
+#define MOSTEK_MIN		0x07faUL
+#define MOSTEK_HOUR		0x07fbUL
+#define MOSTEK_DOW		0x07fcUL
+#define MOSTEK_DOM		0x07fdUL
+#define MOSTEK_MONTH		0x07feUL
+#define MOSTEK_YEAR		0x07ffUL
+
+struct mostek48t02 {
+	volatile char eeprom[2008];	/* This is the eeprom, don't touch! */
+	struct idprom idprom;		/* The idprom lives here. */
+	volatile unsigned char creg;	/* Control register */
+	volatile unsigned char sec;	/* Seconds (0-59) */
+	volatile unsigned char min;	/* Minutes (0-59) */
+	volatile unsigned char hour;	/* Hour (0-23) */
+	volatile unsigned char dow;	/* Day of the week (1-7) */
+	volatile unsigned char dom;	/* Day of the month (1-31) */
+	volatile unsigned char month;	/* Month of year (1-12) */
+	volatile unsigned char year;	/* Year (0-99) */
+};
+
+extern spinlock_t mostek_lock;
+extern void __iomem *mstk48t02_regs;
+
+/* Control register values. */
+#define	MSTK_CREG_WRITE	0x80	/* Must set this before placing values. */
+#define	MSTK_CREG_READ	0x40	/* Stop updates to allow a clean read. */
+#define	MSTK_CREG_SIGN	0x20	/* Slow/speed clock in calibration mode. */
+
+/* Control bits that live in the other registers. */
+#define	MSTK_STOP	0x80	/* Stop the clock oscillator. (sec) */
+#define	MSTK_KICK_START	0x80	/* Kick start the clock chip. (hour) */
+#define MSTK_FREQ_TEST	0x40	/* Frequency test mode. (day) */
+
+#define MSTK_YEAR_ZERO       1968   /* If year reg has zero, it is 1968. */
+#define MSTK_CVT_YEAR(yr)  ((yr) + MSTK_YEAR_ZERO)
+
+/* Masks that define how much space each value takes up. */
+#define	MSTK_SEC_MASK	0x7f
+#define	MSTK_MIN_MASK	0x7f
+#define	MSTK_HOUR_MASK	0x3f
+#define	MSTK_DOW_MASK	0x07
+#define	MSTK_DOM_MASK	0x3f
+#define	MSTK_MONTH_MASK	0x1f
+#define	MSTK_YEAR_MASK	0xffU
+
+/* Binary coded decimal conversion macros. */
+#define MSTK_REGVAL_TO_DECIMAL(x)  (((x) & 0x0F) + 0x0A * ((x) >> 0x04))
+#define MSTK_DECIMAL_TO_REGVAL(x)  ((((x) / 0x0A) << 0x04) + ((x) % 0x0A))
+
+/* Generic register set and get macros for internal use. */
+#define MSTK_GET(regs,var,mask) (MSTK_REGVAL_TO_DECIMAL(((struct mostek48t02 *)regs)->var & MSTK_ ## mask ## _MASK))
+#define MSTK_SET(regs,var,value,mask) do { ((struct mostek48t02 *)regs)->var &= ~(MSTK_ ## mask ## _MASK); ((struct mostek48t02 *)regs)->var |= MSTK_DECIMAL_TO_REGVAL(value) & (MSTK_ ## mask ## _MASK); } while (0)
+
+/* Macros to make register access easier on our fingers. These give you
+ * the decimal value of the register requested if applicable. You pass
+ * the a pointer to a 'struct mostek48t02'.
+ */
+#define	MSTK_REG_CREG(regs)	(((struct mostek48t02 *)regs)->creg)
+#define	MSTK_REG_SEC(regs)	MSTK_GET(regs,sec,SEC)
+#define	MSTK_REG_MIN(regs)	MSTK_GET(regs,min,MIN)
+#define	MSTK_REG_HOUR(regs)	MSTK_GET(regs,hour,HOUR)
+#define	MSTK_REG_DOW(regs)	MSTK_GET(regs,dow,DOW)
+#define	MSTK_REG_DOM(regs)	MSTK_GET(regs,dom,DOM)
+#define	MSTK_REG_MONTH(regs)	MSTK_GET(regs,month,MONTH)
+#define	MSTK_REG_YEAR(regs)	MSTK_GET(regs,year,YEAR)
+
+#define	MSTK_SET_REG_SEC(regs,value)	MSTK_SET(regs,sec,value,SEC)
+#define	MSTK_SET_REG_MIN(regs,value)	MSTK_SET(regs,min,value,MIN)
+#define	MSTK_SET_REG_HOUR(regs,value)	MSTK_SET(regs,hour,value,HOUR)
+#define	MSTK_SET_REG_DOW(regs,value)	MSTK_SET(regs,dow,value,DOW)
+#define	MSTK_SET_REG_DOM(regs,value)	MSTK_SET(regs,dom,value,DOM)
+#define	MSTK_SET_REG_MONTH(regs,value)	MSTK_SET(regs,month,value,MONTH)
+#define	MSTK_SET_REG_YEAR(regs,value)	MSTK_SET(regs,year,value,YEAR)
+
+
+/* The Mostek 48t08 clock chip. Found on Sun4m's I think. It has the
+ * same (basically) layout of the 48t02 chip except for the extra
+ * NVRAM on board (8 KB against the 48t02's 2 KB).
+ */
+struct mostek48t08 {
+	char offset[6*1024];         /* Magic things may be here, who knows? */
+	struct mostek48t02 regs;     /* Here is what we are interested in.   */
+};
+
+#ifdef CONFIG_SUN4
+enum sparc_clock_type {	MSTK48T02, MSTK48T08, \
+INTERSIL, MSTK_INVALID };
+#else
+enum sparc_clock_type {	MSTK48T02, MSTK48T08, \
+MSTK_INVALID };
+#endif
+
+#ifdef CONFIG_SUN4
+/* intersil on a sun 4/260 code  data from harris doc */
+struct intersil_dt {
+        volatile unsigned char int_csec;
+        volatile unsigned char int_hour;
+        volatile unsigned char int_min;
+        volatile unsigned char int_sec;
+        volatile unsigned char int_month;
+        volatile unsigned char int_day;
+        volatile unsigned char int_year;
+        volatile unsigned char int_dow;
+};
+
+struct intersil {
+	struct intersil_dt clk;
+	struct intersil_dt cmp;
+	volatile unsigned char int_intr_reg;
+	volatile unsigned char int_cmd_reg;
+};
+
+#define INTERSIL_STOP        0x0
+#define INTERSIL_START       0x8
+#define INTERSIL_INTR_DISABLE   0x0
+#define INTERSIL_INTR_ENABLE   0x10
+#define INTERSIL_32K		0x0
+#define INTERSIL_NORMAL		0x0
+#define INTERSIL_24H		0x4
+#define INTERSIL_INT_100HZ	0x2
+
+/* end of intersil info */
+#endif
+
+#endif /* !(_SPARC_MOSTEK_H) */
diff --git a/arch/sparc/include/asm/mostek_64.h b/arch/sparc/include/asm/mostek_64.h
new file mode 100644
index 0000000..c5652de
--- /dev/null
+++ b/arch/sparc/include/asm/mostek_64.h
@@ -0,0 +1,143 @@
+/* mostek.h:  Describes the various Mostek time of day clock registers.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ */
+
+#ifndef _SPARC64_MOSTEK_H
+#define _SPARC64_MOSTEK_H
+
+#include <asm/idprom.h>
+
+/*       M48T02 Register Map (adapted from Sun NVRAM/Hostid FAQ)
+ *
+ *                             Data
+ * Address                                                 Function
+ *        Bit 7 Bit 6 Bit 5 Bit 4Bit 3 Bit 2 Bit 1 Bit 0
+ *   7ff  -     -     -     -    -     -     -     -       Year 00-99
+ *   7fe  0     0     0     -    -     -     -     -      Month 01-12
+ *   7fd  0     0     -     -    -     -     -     -       Date 01-31
+ *   7fc  0     FT    0     0    0     -     -     -        Day 01-07
+ *   7fb  KS    0     -     -    -     -     -     -      Hours 00-23
+ *   7fa  0     -     -     -    -     -     -     -    Minutes 00-59
+ *   7f9  ST    -     -     -    -     -     -     -    Seconds 00-59
+ *   7f8  W     R     S     -    -     -     -     -    Control
+ *
+ *   * ST is STOP BIT
+ *   * W is WRITE BIT
+ *   * R is READ BIT
+ *   * S is SIGN BIT
+ *   * FT is FREQ TEST BIT
+ *   * KS is KICK START BIT
+ */
+
+/* The Mostek 48t02 real time clock and NVRAM chip. The registers
+ * other than the control register are in binary coded decimal. Some
+ * control bits also live outside the control register.
+ *
+ * We now deal with physical addresses for I/O to the chip. -DaveM
+ */
+static inline u8 mostek_read(void __iomem *addr)
+{
+	u8 ret;
+
+	__asm__ __volatile__("lduba	[%1] %2, %0"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+	return ret;
+}
+
+static inline void mostek_write(void __iomem *addr, u8 val)
+{
+	__asm__ __volatile__("stba	%0, [%1] %2"
+			     : /* no outputs */
+			     : "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+#define MOSTEK_EEPROM		0x0000UL
+#define MOSTEK_IDPROM		0x07d8UL
+#define MOSTEK_CREG		0x07f8UL
+#define MOSTEK_SEC		0x07f9UL
+#define MOSTEK_MIN		0x07faUL
+#define MOSTEK_HOUR		0x07fbUL
+#define MOSTEK_DOW		0x07fcUL
+#define MOSTEK_DOM		0x07fdUL
+#define MOSTEK_MONTH		0x07feUL
+#define MOSTEK_YEAR		0x07ffUL
+
+extern spinlock_t mostek_lock;
+extern void __iomem *mstk48t02_regs;
+
+/* Control register values. */
+#define	MSTK_CREG_WRITE	0x80	/* Must set this before placing values. */
+#define	MSTK_CREG_READ	0x40	/* Stop updates to allow a clean read. */
+#define	MSTK_CREG_SIGN	0x20	/* Slow/speed clock in calibration mode. */
+
+/* Control bits that live in the other registers. */
+#define	MSTK_STOP	0x80	/* Stop the clock oscillator. (sec) */
+#define	MSTK_KICK_START	0x80	/* Kick start the clock chip. (hour) */
+#define MSTK_FREQ_TEST	0x40	/* Frequency test mode. (day) */
+
+#define MSTK_YEAR_ZERO       1968   /* If year reg has zero, it is 1968. */
+#define MSTK_CVT_YEAR(yr)  ((yr) + MSTK_YEAR_ZERO)
+
+/* Masks that define how much space each value takes up. */
+#define	MSTK_SEC_MASK	0x7f
+#define	MSTK_MIN_MASK	0x7f
+#define	MSTK_HOUR_MASK	0x3f
+#define	MSTK_DOW_MASK	0x07
+#define	MSTK_DOM_MASK	0x3f
+#define	MSTK_MONTH_MASK	0x1f
+#define	MSTK_YEAR_MASK	0xffU
+
+/* Binary coded decimal conversion macros. */
+#define MSTK_REGVAL_TO_DECIMAL(x)  (((x) & 0x0F) + 0x0A * ((x) >> 0x04))
+#define MSTK_DECIMAL_TO_REGVAL(x)  ((((x) / 0x0A) << 0x04) + ((x) % 0x0A))
+
+/* Generic register set and get macros for internal use. */
+#define MSTK_GET(regs,name)	\
+	(MSTK_REGVAL_TO_DECIMAL(mostek_read(regs + MOSTEK_ ## name) & MSTK_ ## name ## _MASK))
+#define MSTK_SET(regs,name,value) \
+do {	u8 __val = mostek_read(regs + MOSTEK_ ## name); \
+	__val &= ~(MSTK_ ## name ## _MASK); \
+	__val |= (MSTK_DECIMAL_TO_REGVAL(value) & \
+		  (MSTK_ ## name ## _MASK)); \
+	mostek_write(regs + MOSTEK_ ## name, __val); \
+} while(0)
+
+/* Macros to make register access easier on our fingers. These give you
+ * the decimal value of the register requested if applicable. You pass
+ * the a pointer to a 'struct mostek48t02'.
+ */
+#define	MSTK_REG_CREG(regs)	(mostek_read((regs) + MOSTEK_CREG))
+#define	MSTK_REG_SEC(regs)	MSTK_GET(regs,SEC)
+#define	MSTK_REG_MIN(regs)	MSTK_GET(regs,MIN)
+#define	MSTK_REG_HOUR(regs)	MSTK_GET(regs,HOUR)
+#define	MSTK_REG_DOW(regs)	MSTK_GET(regs,DOW)
+#define	MSTK_REG_DOM(regs)	MSTK_GET(regs,DOM)
+#define	MSTK_REG_MONTH(regs)	MSTK_GET(regs,MONTH)
+#define	MSTK_REG_YEAR(regs)	MSTK_GET(regs,YEAR)
+
+#define	MSTK_SET_REG_SEC(regs,value)	MSTK_SET(regs,SEC,value)
+#define	MSTK_SET_REG_MIN(regs,value)	MSTK_SET(regs,MIN,value)
+#define	MSTK_SET_REG_HOUR(regs,value)	MSTK_SET(regs,HOUR,value)
+#define	MSTK_SET_REG_DOW(regs,value)	MSTK_SET(regs,DOW,value)
+#define	MSTK_SET_REG_DOM(regs,value)	MSTK_SET(regs,DOM,value)
+#define	MSTK_SET_REG_MONTH(regs,value)	MSTK_SET(regs,MONTH,value)
+#define	MSTK_SET_REG_YEAR(regs,value)	MSTK_SET(regs,YEAR,value)
+
+
+/* The Mostek 48t08 clock chip. Found on Sun4m's I think. It has the
+ * same (basically) layout of the 48t02 chip except for the extra
+ * NVRAM on board (8 KB against the 48t02's 2 KB).
+ */
+#define MOSTEK_48T08_OFFSET	0x0000UL	/* Lower NVRAM portions */
+#define MOSTEK_48T08_48T02	0x1800UL	/* Offset to 48T02 chip */
+
+/* SUN5 systems usually have 48t59 model clock chipsets.  But we keep the older
+ * clock chip definitions around just in case.
+ */
+#define MOSTEK_48T59_OFFSET	0x0000UL	/* Lower NVRAM portions */
+#define MOSTEK_48T59_48T02	0x1800UL	/* Offset to 48T02 chip */
+
+#endif /* !(_SPARC64_MOSTEK_H) */
diff --git a/arch/sparc/include/asm/mpmbox.h b/arch/sparc/include/asm/mpmbox.h
new file mode 100644
index 0000000..f842303
--- /dev/null
+++ b/arch/sparc/include/asm/mpmbox.h
@@ -0,0 +1,67 @@
+/*
+ * mpmbox.h:  Interface and defines for the OpenProm mailbox
+ *               facilities for MP machines under Linux.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_MPMBOX_H
+#define _SPARC_MPMBOX_H
+
+/* The prom allocates, for each CPU on the machine an unsigned
+ * byte in physical ram.  You probe the device tree prom nodes
+ * for these values.  The purpose of this byte is to be able to
+ * pass messages from one cpu to another.
+ */
+
+/* These are the main message types we have to look for in our
+ * Cpu mailboxes, based upon these values we decide what course
+ * of action to take.
+ */
+
+/* The CPU is executing code in the kernel. */
+#define MAILBOX_ISRUNNING     0xf0
+
+/* Another CPU called romvec->pv_exit(), you should call
+ * prom_stopcpu() when you see this in your mailbox.
+ */
+#define MAILBOX_EXIT          0xfb
+
+/* Another CPU called romvec->pv_enter(), you should call
+ * prom_cpuidle() when this is seen.
+ */
+#define MAILBOX_GOSPIN        0xfc
+
+/* Another CPU has hit a breakpoint either into kadb or the prom
+ * itself.  Just like MAILBOX_GOSPIN, you should call prom_cpuidle()
+ * at this point.
+ */
+#define MAILBOX_BPT_SPIN      0xfd
+
+/* Oh geese, some other nitwit got a damn watchdog reset.  The party's
+ * over so go call prom_stopcpu().
+ */
+#define MAILBOX_WDOG_STOP     0xfe
+
+#ifndef __ASSEMBLY__
+
+/* Handy macro's to determine a cpu's state. */
+
+/* Is the cpu still in Power On Self Test? */
+#define MBOX_POST_P(letter)  ((letter) >= 0x00 && (letter) <= 0x7f)
+
+/* Is the cpu at the 'ok' prompt of the PROM? */
+#define MBOX_PROMPROMPT_P(letter) ((letter) >= 0x80 && (letter) <= 0x8f)
+
+/* Is the cpu spinning in the PROM? */
+#define MBOX_PROMSPIN_P(letter) ((letter) >= 0x90 && (letter) <= 0xef)
+
+/* Sanity check... This is junk mail, throw it out. */
+#define MBOX_BOGON_P(letter) ((letter) >= 0xf1 && (letter) <= 0xfa)
+
+/* Is the cpu actively running an application/kernel-code? */
+#define MBOX_RUNNING_P(letter) ((letter) == MAILBOX_ISRUNNING)
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_MPMBOX_H) */
diff --git a/arch/sparc/include/asm/msgbuf.h b/arch/sparc/include/asm/msgbuf.h
new file mode 100644
index 0000000..efc7cbe9
--- /dev/null
+++ b/arch/sparc/include/asm/msgbuf.h
@@ -0,0 +1,38 @@
+#ifndef _SPARC_MSGBUF_H
+#define _SPARC_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for sparc64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+#if defined(__sparc__) && defined(__arch64__)
+# define PADDING(x)
+#else
+# define PADDING(x) unsigned int x;
+#endif
+
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	PADDING(__pad1)
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	PADDING(__pad2)
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	PADDING(__pad3)
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused1;
+	unsigned long  __unused2;
+};
+#undef PADDING
+#endif /* _SPARC_MSGBUF_H */
diff --git a/arch/sparc/include/asm/msi.h b/arch/sparc/include/asm/msi.h
new file mode 100644
index 0000000..724ca56
--- /dev/null
+++ b/arch/sparc/include/asm/msi.h
@@ -0,0 +1,31 @@
+/*
+ * msi.h:  Defines specific to the MBus - Sbus - Interface.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996 Eddie C. Dost   (ecd@skynet.be)
+ */
+
+#ifndef _SPARC_MSI_H
+#define _SPARC_MSI_H
+
+/*
+ * Locations of MSI Registers.
+ */
+#define MSI_MBUS_ARBEN	0xe0001008	/* MBus Arbiter Enable register */
+
+/*
+ * Useful bits in the MSI Registers.
+ */
+#define MSI_ASYNC_MODE  0x80000000	/* Operate the MSI asynchronously */
+
+
+static inline void msi_set_sync(void)
+{
+	__asm__ __volatile__ ("lda [%0] %1, %%g3\n\t"
+			      "andn %%g3, %2, %%g3\n\t"
+			      "sta %%g3, [%0] %1\n\t" : :
+			      "r" (MSI_MBUS_ARBEN),
+			      "i" (ASI_M_CTL), "r" (MSI_ASYNC_MODE) : "g3");
+}
+
+#endif /* !(_SPARC_MSI_H) */
diff --git a/arch/sparc/include/asm/mutex.h b/arch/sparc/include/asm/mutex.h
new file mode 100644
index 0000000..458c1f7
--- /dev/null
+++ b/arch/sparc/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/sparc/include/asm/mxcc.h b/arch/sparc/include/asm/mxcc.h
new file mode 100644
index 0000000..c0517bd
--- /dev/null
+++ b/arch/sparc/include/asm/mxcc.h
@@ -0,0 +1,137 @@
+/*
+ * mxcc.h:  Definitions of the Viking MXCC registers
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_MXCC_H
+#define _SPARC_MXCC_H
+
+/* These registers are accessed through ASI 0x2. */
+#define MXCC_DATSTREAM       0x1C00000  /* Data stream register */
+#define MXCC_SRCSTREAM       0x1C00100  /* Source stream register */
+#define MXCC_DESSTREAM       0x1C00200  /* Destination stream register */
+#define MXCC_RMCOUNT         0x1C00300  /* Count of references and misses */
+#define MXCC_STEST           0x1C00804  /* Internal self-test */
+#define MXCC_CREG            0x1C00A04  /* Control register */
+#define MXCC_SREG            0x1C00B00  /* Status register */
+#define MXCC_RREG            0x1C00C04  /* Reset register */
+#define MXCC_EREG            0x1C00E00  /* Error code register */
+#define MXCC_PREG            0x1C00F04  /* Address port register */
+
+/* Some MXCC constants. */
+#define MXCC_STREAM_SIZE     0x20       /* Size in bytes of one stream r/w */
+
+/* The MXCC Control Register:
+ *
+ * ----------------------------------------------------------------------
+ * |                                   | RRC | RSV |PRE|MCE|PARE|ECE|RSV|
+ * ----------------------------------------------------------------------
+ *  31                              10    9    8-6   5   4    3   2  1-0
+ *
+ * RRC: Controls what you read from MXCC_RMCOUNT reg.
+ *      0=Misses 1=References
+ * PRE: Prefetch enable
+ * MCE: Multiple Command Enable
+ * PARE: Parity enable
+ * ECE: External cache enable
+ */
+
+#define MXCC_CTL_RRC   0x00000200
+#define MXCC_CTL_PRE   0x00000020
+#define MXCC_CTL_MCE   0x00000010
+#define MXCC_CTL_PARE  0x00000008
+#define MXCC_CTL_ECE   0x00000004
+
+/* The MXCC Error Register:
+ *
+ * --------------------------------------------------------
+ * |ME| RSV|CE|PEW|PEE|ASE|EIV| MOPC|ECODE|PRIV|RSV|HPADDR|
+ * --------------------------------------------------------
+ *  31   30 29  28  27  26  25 24-15  14-7   6  5-3   2-0
+ *
+ * ME: Multiple Errors have occurred
+ * CE: Cache consistency Error
+ * PEW: Parity Error during a Write operation
+ * PEE: Parity Error involving the External cache
+ * ASE: ASynchronous Error
+ * EIV: This register is toast
+ * MOPC: MXCC Operation Code for instance causing error
+ * ECODE: The Error CODE
+ * PRIV: A privileged mode error? 0=no 1=yes
+ * HPADDR: High PhysicalADDRess bits (35-32)
+ */
+
+#define MXCC_ERR_ME     0x80000000
+#define MXCC_ERR_CE     0x20000000
+#define MXCC_ERR_PEW    0x10000000
+#define MXCC_ERR_PEE    0x08000000
+#define MXCC_ERR_ASE    0x04000000
+#define MXCC_ERR_EIV    0x02000000
+#define MXCC_ERR_MOPC   0x01FF8000
+#define MXCC_ERR_ECODE  0x00007F80
+#define MXCC_ERR_PRIV   0x00000040
+#define MXCC_ERR_HPADDR 0x0000000f
+
+/* The MXCC Port register:
+ *
+ * -----------------------------------------------------
+ * |                | MID |                            |
+ * -----------------------------------------------------
+ *  31            21 20-18 17                         0
+ *
+ * MID: The moduleID of the cpu your read this from.
+ */
+
+#ifndef __ASSEMBLY__
+
+static inline void mxcc_set_stream_src(unsigned long *paddr)
+{
+	unsigned long data0 = paddr[0];
+	unsigned long data1 = paddr[1];
+
+	__asm__ __volatile__ ("or %%g0, %0, %%g2\n\t"
+			      "or %%g0, %1, %%g3\n\t"
+			      "stda %%g2, [%2] %3\n\t" : :
+			      "r" (data0), "r" (data1),
+			      "r" (MXCC_SRCSTREAM),
+			      "i" (ASI_M_MXCC) : "g2", "g3");
+}
+
+static inline void mxcc_set_stream_dst(unsigned long *paddr)
+{
+	unsigned long data0 = paddr[0];
+	unsigned long data1 = paddr[1];
+
+	__asm__ __volatile__ ("or %%g0, %0, %%g2\n\t"
+			      "or %%g0, %1, %%g3\n\t"
+			      "stda %%g2, [%2] %3\n\t" : :
+			      "r" (data0), "r" (data1),
+			      "r" (MXCC_DESSTREAM),
+			      "i" (ASI_M_MXCC) : "g2", "g3");
+}
+
+static inline unsigned long mxcc_get_creg(void)
+{
+	unsigned long mxcc_control;
+
+	__asm__ __volatile__("set 0xffffffff, %%g2\n\t"
+			     "set 0xffffffff, %%g3\n\t"
+			     "stda %%g2, [%1] %2\n\t"
+			     "lda [%3] %2, %0\n\t" :
+			     "=r" (mxcc_control) :
+			     "r" (MXCC_EREG), "i" (ASI_M_MXCC),
+			     "r" (MXCC_CREG) : "g2", "g3");
+	return mxcc_control;
+}
+
+static inline void mxcc_set_creg(unsigned long mxcc_control)
+{
+	__asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+			     "r" (mxcc_control), "r" (MXCC_CREG),
+			     "i" (ASI_M_MXCC));
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_MXCC_H) */
diff --git a/arch/sparc/include/asm/ns87303.h b/arch/sparc/include/asm/ns87303.h
new file mode 100644
index 0000000..686defe
--- /dev/null
+++ b/arch/sparc/include/asm/ns87303.h
@@ -0,0 +1,118 @@
+/* ns87303.h: Configuration Register Description for the
+ *            National Semiconductor PC87303 (SuperIO).
+ *
+ * Copyright (C) 1997  Eddie C. Dost  (ecd@skynet.be)
+ */
+
+#ifndef _SPARC_NS87303_H
+#define _SPARC_NS87303_H 1
+
+/*
+ * Control Register Index Values
+ */
+#define FER	0x00
+#define FAR	0x01
+#define PTR	0x02
+#define FCR	0x03
+#define PCR	0x04
+#define KRR	0x05
+#define PMC	0x06
+#define TUP	0x07
+#define SID	0x08
+#define ASC	0x09
+#define CS0CF0	0x0a
+#define CS0CF1	0x0b
+#define CS1CF0	0x0c
+#define CS1CF1	0x0d
+
+/* Function Enable Register (FER) bits */
+#define FER_EDM		0x10	/* Encoded Drive and Motor pin information   */
+
+/* Function Address Register (FAR) bits */
+#define FAR_LPT_MASK	0x03
+#define FAR_LPTB	0x00
+#define FAR_LPTA	0x01
+#define FAR_LPTC	0x02
+
+/* Power and Test Register (PTR) bits */
+#define PTR_LPTB_IRQ7	0x08
+#define PTR_LEVEL_IRQ	0x80	/* When not ECP/EPP: Use level IRQ           */
+#define PTR_LPT_REG_DIR	0x80	/* When ECP/EPP: LPT CTR controlls direction */
+				/*               of the parallel port	     */
+
+/* Function Control Register (FCR) bits */
+#define FCR_LDE		0x10	/* Logical Drive Exchange                    */
+#define FCR_ZWS_ENA	0x20	/* Enable short host read/write in ECP/EPP   */
+
+/* Printer Control Register (PCR) bits */
+#define PCR_EPP_ENABLE	0x01
+#define PCR_EPP_IEEE	0x02	/* Enable EPP Version 1.9 (IEEE 1284)        */
+#define PCR_ECP_ENABLE	0x04
+#define PCR_ECP_CLK_ENA	0x08	/* If 0 ECP Clock is stopped on Power down   */
+#define PCR_IRQ_POLAR	0x20	/* If 0 IRQ is level high or negative pulse, */
+				/* if 1 polarity is inverted                 */
+#define PCR_IRQ_ODRAIN	0x40	/* If 1, IRQ is open drain                   */
+
+/* Tape UARTs and Parallel Port Config Register (TUP) bits */
+#define TUP_EPP_TIMO	0x02	/* Enable EPP timeout IRQ                    */
+
+/* Advanced SuperIO Config Register (ASC) bits */
+#define ASC_LPT_IRQ7	0x01	/* Always use IRQ7 for LPT                  */
+#define ASC_DRV2_SEL	0x02	/* Logical Drive Exchange controlled by TDR  */
+
+#define FER_RESERVED	0x00
+#define FAR_RESERVED	0x00
+#define PTR_RESERVED	0x73
+#define FCR_RESERVED	0xc4
+#define PCR_RESERVED	0x10
+#define KRR_RESERVED	0x00
+#define PMC_RESERVED	0x98
+#define TUP_RESERVED	0xfb
+#define SIP_RESERVED	0x00
+#define ASC_RESERVED	0x18
+#define CS0CF0_RESERVED	0x00
+#define CS0CF1_RESERVED	0x08
+#define CS1CF0_RESERVED	0x00
+#define CS1CF1_RESERVED	0x08
+
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+
+extern spinlock_t ns87303_lock;
+
+static inline int ns87303_modify(unsigned long port, unsigned int index,
+				     unsigned char clr, unsigned char set)
+{
+	static unsigned char reserved[] = {
+		FER_RESERVED, FAR_RESERVED, PTR_RESERVED, FCR_RESERVED,
+		PCR_RESERVED, KRR_RESERVED, PMC_RESERVED, TUP_RESERVED,
+		SIP_RESERVED, ASC_RESERVED, CS0CF0_RESERVED, CS0CF1_RESERVED,
+		CS1CF0_RESERVED, CS1CF1_RESERVED
+	};
+	unsigned long flags;
+	unsigned char value;
+
+	if (index > 0x0d)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ns87303_lock, flags);
+
+	outb(index, port);
+	value = inb(port + 1);
+	value &= ~(reserved[index] | clr);
+	value |= set;
+	outb(value, port + 1);
+	outb(value, port + 1);
+
+	spin_unlock_irqrestore(&ns87303_lock, flags);
+
+	return 0;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* !(_SPARC_NS87303_H) */
diff --git a/arch/sparc/include/asm/obio.h b/arch/sparc/include/asm/obio.h
new file mode 100644
index 0000000..1a7544c
--- /dev/null
+++ b/arch/sparc/include/asm/obio.h
@@ -0,0 +1,249 @@
+/*
+ * obio.h:  Some useful locations in 0xFXXXXXXXX PA obio space on sun4d.
+ *
+ * Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz>
+ */
+
+#ifndef _SPARC_OBIO_H
+#define _SPARC_OBIO_H
+
+#include <asm/asi.h>
+
+/* This weird monster likes to use the very upper parts of
+   36bit PA for these things :) */
+   
+/* CSR space (for each XDBUS)
+ *  ------------------------------------------------------------------------
+ *  |   0xFE  |   DEVID    |                | XDBUS ID |                   |
+ *  ------------------------------------------------------------------------
+ *  35      28 27        20 19            10 9        8 7                 0
+ */
+   
+#define CSR_BASE_ADDR		0xe0000000
+#define CSR_CPU_SHIFT		(32 - 4 - 5)
+#define CSR_XDBUS_SHIFT		8
+
+#define CSR_BASE(cpu) (((CSR_BASE_ADDR >> CSR_CPU_SHIFT) + cpu) << CSR_CPU_SHIFT)
+
+/* ECSR space (not for each XDBUS)
+ *  ------------------------------------------------------------------------
+ *  |   0xF  | DEVID[7:1] |                			           |
+ *  ------------------------------------------------------------------------
+ *  35     32 31        25 24                 				  0
+ */
+   
+#define ECSR_BASE_ADDR		0x00000000
+#define ECSR_CPU_SHIFT		(32 - 5)
+#define ECSR_DEV_SHIFT		(32 - 8)
+
+#define ECSR_BASE(cpu) ((cpu) << ECSR_CPU_SHIFT)
+#define ECSR_DEV_BASE(devid) ((devid) << ECSR_DEV_SHIFT) 
+
+/* Bus Watcher */
+#define BW_LOCAL_BASE		0xfff00000
+
+#define BW_CID			0x00000000
+#define BW_DBUS_CTRL		0x00000008
+#define BW_DBUS_DATA		0x00000010
+#define BW_CTRL			0x00001000
+#define BW_INTR_TABLE		0x00001040
+#define BW_INTR_TABLE_CLEAR	0x00001080
+#define BW_PRESCALER		0x000010c0
+#define BW_PTIMER_LIMIT		0x00002000
+#define BW_PTIMER_COUNTER2	0x00002004
+#define BW_PTIMER_NDLIMIT	0x00002008
+#define BW_PTIMER_CTRL		0x0000200c
+#define BW_PTIMER_COUNTER	0x00002010
+#define BW_TIMER_LIMIT		0x00003000
+#define BW_TIMER_COUNTER2	0x00003004
+#define BW_TIMER_NDLIMIT	0x00003008
+#define BW_TIMER_CTRL		0x0000300c
+#define BW_TIMER_COUNTER	0x00003010
+
+/* BW Control */
+#define BW_CTRL_USER_TIMER	0x00000004	/* Is User Timer Free run enabled */
+
+/* Boot Bus */
+#define BB_LOCAL_BASE		0xf0000000
+
+#define BB_STAT1		0x00100000
+#define BB_STAT2		0x00120000
+#define BB_STAT3		0x00140000
+#define BB_LEDS			0x002e0000
+
+/* Bits in BB_STAT2 */
+#define BB_STAT2_AC_INTR	0x04	/* Aiee! 5ms and power is gone... */
+#define BB_STAT2_TMP_INTR	0x10	/* My Penguins are burning. Are you able to smell it? */
+#define BB_STAT2_FAN_INTR	0x20	/* My fan refuses to work */
+#define BB_STAT2_PWR_INTR	0x40	/* On SC2000, one of the two ACs died. Ok, we go on... */
+#define BB_STAT2_MASK		(BB_STAT2_AC_INTR|BB_STAT2_TMP_INTR|BB_STAT2_FAN_INTR|BB_STAT2_PWR_INTR)
+
+/* Cache Controller */
+#define CC_BASE		0x1F00000
+#define CC_DATSTREAM	0x1F00000  /* Data stream register */
+#define CC_DATSIZE	0x1F0003F  /* Size */
+#define CC_SRCSTREAM	0x1F00100  /* Source stream register */
+#define CC_DESSTREAM	0x1F00200  /* Destination stream register */
+#define CC_RMCOUNT	0x1F00300  /* Count of references and misses */
+#define CC_IPEN		0x1F00406  /* Pending Interrupts */
+#define CC_IMSK		0x1F00506  /* Interrupt Mask */
+#define CC_ICLR		0x1F00606  /* Clear pending Interrupts */
+#define CC_IGEN		0x1F00704  /* Generate Interrupt register */
+#define CC_STEST	0x1F00804  /* Internal self-test */
+#define CC_CREG		0x1F00A04  /* Control register */
+#define CC_SREG		0x1F00B00  /* Status register */
+#define CC_RREG		0x1F00C04  /* Reset register */
+#define CC_EREG		0x1F00E00  /* Error code register */
+#define CC_CID		0x1F00F04  /* Component ID */
+
+#ifndef __ASSEMBLY__
+
+static inline int bw_get_intr_mask(int sbus_level)
+{
+	int mask;
+	
+	__asm__ __volatile__ ("lduha [%1] %2, %0" :
+			      "=r" (mask) :
+			      "r" (BW_LOCAL_BASE + BW_INTR_TABLE + (sbus_level << 3)),
+			      "i" (ASI_M_CTL));
+	return mask;
+}
+
+static inline void bw_clear_intr_mask(int sbus_level, int mask)
+{
+	__asm__ __volatile__ ("stha %0, [%1] %2" : :
+			      "r" (mask),
+			      "r" (BW_LOCAL_BASE + BW_INTR_TABLE_CLEAR + (sbus_level << 3)),
+			      "i" (ASI_M_CTL));
+}
+
+static inline unsigned bw_get_prof_limit(int cpu)
+{
+	unsigned limit;
+	
+	__asm__ __volatile__ ("lda [%1] %2, %0" :
+			      "=r" (limit) :
+			      "r" (CSR_BASE(cpu) + BW_PTIMER_LIMIT),
+			      "i" (ASI_M_CTL));
+	return limit;
+}
+
+static inline void bw_set_prof_limit(int cpu, unsigned limit)
+{
+	__asm__ __volatile__ ("sta %0, [%1] %2" : :
+			      "r" (limit),
+			      "r" (CSR_BASE(cpu) + BW_PTIMER_LIMIT),
+			      "i" (ASI_M_CTL));
+}
+
+static inline unsigned bw_get_ctrl(int cpu)
+{
+	unsigned ctrl;
+	
+	__asm__ __volatile__ ("lda [%1] %2, %0" :
+			      "=r" (ctrl) :
+			      "r" (CSR_BASE(cpu) + BW_CTRL),
+			      "i" (ASI_M_CTL));
+	return ctrl;
+}
+
+static inline void bw_set_ctrl(int cpu, unsigned ctrl)
+{
+	__asm__ __volatile__ ("sta %0, [%1] %2" : :
+			      "r" (ctrl),
+			      "r" (CSR_BASE(cpu) + BW_CTRL),
+			      "i" (ASI_M_CTL));
+}
+
+extern unsigned char cpu_leds[32];
+
+static inline void show_leds(int cpuid)
+{
+	cpuid &= 0x1e;
+	__asm__ __volatile__ ("stba %0, [%1] %2" : :
+			      "r" ((cpu_leds[cpuid] << 4) | cpu_leds[cpuid+1]),
+			      "r" (ECSR_BASE(cpuid) | BB_LEDS),
+			      "i" (ASI_M_CTL));
+}
+
+static inline unsigned cc_get_ipen(void)
+{
+	unsigned pending;
+	
+	__asm__ __volatile__ ("lduha [%1] %2, %0" :
+			      "=r" (pending) :
+			      "r" (CC_IPEN),
+			      "i" (ASI_M_MXCC));
+	return pending;
+}
+
+static inline void cc_set_iclr(unsigned clear)
+{
+	__asm__ __volatile__ ("stha %0, [%1] %2" : :
+			      "r" (clear),
+			      "r" (CC_ICLR),
+			      "i" (ASI_M_MXCC));
+}
+
+static inline unsigned cc_get_imsk(void)
+{
+	unsigned mask;
+	
+	__asm__ __volatile__ ("lduha [%1] %2, %0" :
+			      "=r" (mask) :
+			      "r" (CC_IMSK),
+			      "i" (ASI_M_MXCC));
+	return mask;
+}
+
+static inline void cc_set_imsk(unsigned mask)
+{
+	__asm__ __volatile__ ("stha %0, [%1] %2" : :
+			      "r" (mask),
+			      "r" (CC_IMSK),
+			      "i" (ASI_M_MXCC));
+}
+
+static inline unsigned cc_get_imsk_other(int cpuid)
+{
+	unsigned mask;
+	
+	__asm__ __volatile__ ("lduha [%1] %2, %0" :
+			      "=r" (mask) :
+			      "r" (ECSR_BASE(cpuid) | CC_IMSK),
+			      "i" (ASI_M_CTL));
+	return mask;
+}
+
+static inline void cc_set_imsk_other(int cpuid, unsigned mask)
+{
+	__asm__ __volatile__ ("stha %0, [%1] %2" : :
+			      "r" (mask),
+			      "r" (ECSR_BASE(cpuid) | CC_IMSK),
+			      "i" (ASI_M_CTL));
+}
+
+static inline void cc_set_igen(unsigned gen)
+{
+	__asm__ __volatile__ ("sta %0, [%1] %2" : :
+			      "r" (gen),
+			      "r" (CC_IGEN),
+			      "i" (ASI_M_MXCC));
+}
+
+/* +-------+-------------+-----------+------------------------------------+
+ * | bcast |  devid      |   sid     |              levels mask           |
+ * +-------+-------------+-----------+------------------------------------+
+ *  31      30         23 22       15 14                                 0
+ */
+#define IGEN_MESSAGE(bcast, devid, sid, levels) \
+	(((bcast) << 31) | ((devid) << 23) | ((sid) << 15) | (levels))
+            
+static inline void sun4d_send_ipi(int cpu, int level)
+{
+	cc_set_igen(IGEN_MESSAGE(0, cpu << 3, 6 + ((level >> 1) & 7), 1 << (level - 1)));
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_OBIO_H) */
diff --git a/arch/sparc/include/asm/of_device.h b/arch/sparc/include/asm/of_device.h
new file mode 100644
index 0000000..e5f5aed
--- /dev/null
+++ b/arch/sparc/include/asm/of_device.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_SPARC_OF_DEVICE_H
+#define _ASM_SPARC_OF_DEVICE_H
+#ifdef __KERNEL__
+
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/mod_devicetable.h>
+#include <asm/openprom.h>
+
+/*
+ * The of_device is a kind of "base class" that is a superset of
+ * struct device for use by devices attached to an OF node and
+ * probed using OF properties.
+ */
+struct of_device
+{
+	struct device_node		*node;
+	struct device			dev;
+	struct resource			resource[PROMREG_MAX];
+	unsigned int			irqs[PROMINTR_MAX];
+	int				num_irqs;
+
+	void				*sysdata;
+
+	int				slot;
+	int				portid;
+	int				clock_freq;
+};
+
+extern void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name);
+extern void of_iounmap(struct resource *res, void __iomem *base, unsigned long size);
+
+/* These are just here during the transition */
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_SPARC_OF_DEVICE_H */
diff --git a/arch/sparc/include/asm/of_platform.h b/arch/sparc/include/asm/of_platform.h
new file mode 100644
index 0000000..aa69977
--- /dev/null
+++ b/arch/sparc/include/asm/of_platform.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_OF_PLATFORM_H
+#define ___ASM_SPARC_OF_PLATFORM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/of_platform_64.h>
+#else
+#include <asm/of_platform_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/of_platform_32.h b/arch/sparc/include/asm/of_platform_32.h
new file mode 100644
index 0000000..723f7c9
--- /dev/null
+++ b/arch/sparc/include/asm/of_platform_32.h
@@ -0,0 +1,24 @@
+#ifndef _ASM_SPARC_OF_PLATFORM_H
+#define _ASM_SPARC_OF_PLATFORM_H
+/*
+ *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
+ *			 <benh@kernel.crashing.org>
+ *    Modified for Sparc by merging parts of asm/of_device.h
+ *		by Stephen Rothwell
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+/* This is just here during the transition */
+#include <linux/of_platform.h>
+
+extern struct bus_type ebus_bus_type;
+extern struct bus_type sbus_bus_type;
+
+#define of_bus_type	of_platform_bus_type	/* for compatibility */
+
+#endif	/* _ASM_SPARC_OF_PLATFORM_H */
diff --git a/arch/sparc/include/asm/of_platform_64.h b/arch/sparc/include/asm/of_platform_64.h
new file mode 100644
index 0000000..4f66a5f
--- /dev/null
+++ b/arch/sparc/include/asm/of_platform_64.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_SPARC64_OF_PLATFORM_H
+#define _ASM_SPARC64_OF_PLATFORM_H
+/*
+ *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
+ *			 <benh@kernel.crashing.org>
+ *    Modified for Sparc by merging parts of asm/of_device.h
+ *		by Stephen Rothwell
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+/* This is just here during the transition */
+#include <linux/of_platform.h>
+
+extern struct bus_type isa_bus_type;
+extern struct bus_type ebus_bus_type;
+extern struct bus_type sbus_bus_type;
+
+#define of_bus_type	of_platform_bus_type	/* for compatibility */
+
+#endif	/* _ASM_SPARC64_OF_PLATFORM_H */
diff --git a/arch/sparc/include/asm/openprom.h b/arch/sparc/include/asm/openprom.h
new file mode 100644
index 0000000..aaeae905
--- /dev/null
+++ b/arch/sparc/include/asm/openprom.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_OPENPROM_H
+#define ___ASM_SPARC_OPENPROM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/openprom_64.h>
+#else
+#include <asm/openprom_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/openprom_32.h b/arch/sparc/include/asm/openprom_32.h
new file mode 100644
index 0000000..8b1649f
--- /dev/null
+++ b/arch/sparc/include/asm/openprom_32.h
@@ -0,0 +1,255 @@
+#ifndef __SPARC_OPENPROM_H
+#define __SPARC_OPENPROM_H
+
+/* openprom.h:  Prom structures and defines for access to the OPENBOOT
+ *              prom routines and data areas.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* Empirical constants... */
+#define	LINUX_OPPROM_MAGIC      0x10010407
+
+#ifndef __ASSEMBLY__
+/* V0 prom device operations. */
+struct linux_dev_v0_funcs {
+	int (*v0_devopen)(char *device_str);
+	int (*v0_devclose)(int dev_desc);
+	int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+	int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+	int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf);
+	int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf);
+	int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+	int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+	int (*v0_seekdev)(int dev_desc, long logical_offst, int from);
+};
+
+/* V2 and later prom device operations. */
+struct linux_dev_v2_funcs {
+	int (*v2_inst2pkg)(int d);	/* Convert ihandle to phandle */
+	char * (*v2_dumb_mem_alloc)(char *va, unsigned sz);
+	void (*v2_dumb_mem_free)(char *va, unsigned sz);
+
+	/* To map devices into virtual I/O space. */
+	char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz);
+	void (*v2_dumb_munmap)(char *virta, unsigned size);
+
+	int (*v2_dev_open)(char *devpath);
+	void (*v2_dev_close)(int d);
+	int (*v2_dev_read)(int d, char *buf, int nbytes);
+	int (*v2_dev_write)(int d, char *buf, int nbytes);
+	int (*v2_dev_seek)(int d, int hi, int lo);
+
+	/* Never issued (multistage load support) */
+	void (*v2_wheee2)(void);
+	void (*v2_wheee3)(void);
+};
+
+struct linux_mlist_v0 {
+	struct linux_mlist_v0 *theres_more;
+	char *start_adr;
+	unsigned num_bytes;
+};
+
+struct linux_mem_v0 {
+	struct linux_mlist_v0 **v0_totphys;
+	struct linux_mlist_v0 **v0_prommap;
+	struct linux_mlist_v0 **v0_available; /* What we can use */
+};
+
+/* Arguments sent to the kernel from the boot prompt. */
+struct linux_arguments_v0 {
+	char *argv[8];
+	char args[100];
+	char boot_dev[2];
+	int boot_dev_ctrl;
+	int boot_dev_unit;
+	int dev_partition;
+	char *kernel_file_name;
+	void *aieee1;           /* XXX */
+};
+
+/* V2 and up boot things. */
+struct linux_bootargs_v2 {
+	char **bootpath;
+	char **bootargs;
+	int *fd_stdin;
+	int *fd_stdout;
+};
+
+/* The top level PROM vector. */
+struct linux_romvec {
+	/* Version numbers. */
+	unsigned int pv_magic_cookie;
+	unsigned int pv_romvers;
+	unsigned int pv_plugin_revision;
+	unsigned int pv_printrev;
+
+	/* Version 0 memory descriptors. */
+	struct linux_mem_v0 pv_v0mem;
+
+	/* Node operations. */
+	struct linux_nodeops *pv_nodeops;
+
+	char **pv_bootstr;
+	struct linux_dev_v0_funcs pv_v0devops;
+
+	char *pv_stdin;
+	char *pv_stdout;
+#define	PROMDEV_KBD	0		/* input from keyboard */
+#define	PROMDEV_SCREEN	0		/* output to screen */
+#define	PROMDEV_TTYA	1		/* in/out to ttya */
+#define	PROMDEV_TTYB	2		/* in/out to ttyb */
+
+	/* Blocking getchar/putchar.  NOT REENTRANT! (grr) */
+	int (*pv_getchar)(void);
+	void (*pv_putchar)(int ch);
+
+	/* Non-blocking variants. */
+	int (*pv_nbgetchar)(void);
+	int (*pv_nbputchar)(int ch);
+
+	void (*pv_putstr)(char *str, int len);
+
+	/* Miscellany. */
+	void (*pv_reboot)(char *bootstr);
+	void (*pv_printf)(__const__ char *fmt, ...);
+	void (*pv_abort)(void);
+	__volatile__ int *pv_ticks;
+	void (*pv_halt)(void);
+	void (**pv_synchook)(void);
+
+	/* Evaluate a forth string, not different proto for V0 and V2->up. */
+	union {
+		void (*v0_eval)(int len, char *str);
+		void (*v2_eval)(char *str);
+	} pv_fortheval;
+
+	struct linux_arguments_v0 **pv_v0bootargs;
+
+	/* Get ether address. */
+	unsigned int (*pv_enaddr)(int d, char *enaddr);
+
+	struct linux_bootargs_v2 pv_v2bootargs;
+	struct linux_dev_v2_funcs pv_v2devops;
+
+	int filler[15];
+
+	/* This one is sun4c/sun4 only. */
+	void (*pv_setctxt)(int ctxt, char *va, int pmeg);
+
+	/* Prom version 3 Multiprocessor routines. This stuff is crazy.
+	 * No joke. Calling these when there is only one cpu probably
+	 * crashes the machine, have to test this. :-)
+	 */
+
+	/* v3_cpustart() will start the cpu 'whichcpu' in mmu-context
+	 * 'thiscontext' executing at address 'prog_counter'
+	 */
+	int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr,
+			   int thiscontext, char *prog_counter);
+
+	/* v3_cpustop() will cause cpu 'whichcpu' to stop executing
+	 * until a resume cpu call is made.
+	 */
+	int (*v3_cpustop)(unsigned int whichcpu);
+
+	/* v3_cpuidle() will idle cpu 'whichcpu' until a stop or
+	 * resume cpu call is made.
+	 */
+	int (*v3_cpuidle)(unsigned int whichcpu);
+
+	/* v3_cpuresume() will resume processor 'whichcpu' executing
+	 * starting with whatever 'pc' and 'npc' were left at the
+	 * last 'idle' or 'stop' call.
+	 */
+	int (*v3_cpuresume)(unsigned int whichcpu);
+};
+
+/* Routines for traversing the prom device tree. */
+struct linux_nodeops {
+	int (*no_nextnode)(int node);
+	int (*no_child)(int node);
+	int (*no_proplen)(int node, char *name);
+	int (*no_getprop)(int node, char *name, char *val);
+	int (*no_setprop)(int node, char *name, char *val, int len);
+	char * (*no_nextprop)(int node, char *name);
+};
+
+/* More fun PROM structures for device probing. */
+#define PROMREG_MAX     16
+#define PROMVADDR_MAX   16
+#define PROMINTR_MAX    15
+
+struct linux_prom_registers {
+	unsigned int which_io;         /* is this in OBIO space? */
+	unsigned int phys_addr;        /* The physical address of this register */
+	unsigned int reg_size;         /* How many bytes does this register take up? */
+};
+
+struct linux_prom_irqs {
+	int pri;    /* IRQ priority */
+	int vector; /* This is foobar, what does it do? */
+};
+
+/* Element of the "ranges" vector */
+struct linux_prom_ranges {
+	unsigned int ot_child_space;
+	unsigned int ot_child_base;		/* Bus feels this */
+	unsigned int ot_parent_space;
+	unsigned int ot_parent_base;		/* CPU looks from here */
+	unsigned int or_size;
+};
+
+/* Ranges and reg properties are a bit different for PCI. */
+struct linux_prom_pci_registers {
+	/*
+	 * We don't know what information this field contain.
+	 * We guess, PCI device function is in bits 15:8
+	 * So, ...
+	 */
+	unsigned int which_io;  /* Let it be which_io */
+
+	unsigned int phys_hi;
+	unsigned int phys_lo;
+
+	unsigned int size_hi;
+	unsigned int size_lo;
+};
+
+struct linux_prom_pci_ranges {
+	unsigned int child_phys_hi;	/* Only certain bits are encoded here. */
+	unsigned int child_phys_mid;
+	unsigned int child_phys_lo;
+
+	unsigned int parent_phys_hi;
+	unsigned int parent_phys_lo;
+
+	unsigned int size_hi;
+	unsigned int size_lo;
+};
+
+struct linux_prom_pci_assigned_addresses {
+	unsigned int which_io;
+
+	unsigned int phys_hi;
+	unsigned int phys_lo;
+
+	unsigned int size_hi;
+	unsigned int size_lo;
+};
+
+struct linux_prom_ebus_ranges {
+	unsigned int child_phys_hi;
+	unsigned int child_phys_lo;
+
+	unsigned int parent_phys_hi;
+	unsigned int parent_phys_mid;
+	unsigned int parent_phys_lo;
+
+	unsigned int size;
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC_OPENPROM_H) */
diff --git a/arch/sparc/include/asm/openprom_64.h b/arch/sparc/include/asm/openprom_64.h
new file mode 100644
index 0000000..b69e4a8
--- /dev/null
+++ b/arch/sparc/include/asm/openprom_64.h
@@ -0,0 +1,280 @@
+#ifndef __SPARC64_OPENPROM_H
+#define __SPARC64_OPENPROM_H
+
+/* openprom.h:  Prom structures and defines for access to the OPENBOOT
+ *              prom routines and data areas.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __ASSEMBLY__
+/* V0 prom device operations. */
+struct linux_dev_v0_funcs {
+	int (*v0_devopen)(char *device_str);
+	int (*v0_devclose)(int dev_desc);
+	int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+	int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+	int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf);
+	int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf);
+	int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+	int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+	int (*v0_seekdev)(int dev_desc, long logical_offst, int from);
+};
+
+/* V2 and later prom device operations. */
+struct linux_dev_v2_funcs {
+	int (*v2_inst2pkg)(int d);	/* Convert ihandle to phandle */
+	char * (*v2_dumb_mem_alloc)(char *va, unsigned sz);
+	void (*v2_dumb_mem_free)(char *va, unsigned sz);
+
+	/* To map devices into virtual I/O space. */
+	char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz);
+	void (*v2_dumb_munmap)(char *virta, unsigned size);
+
+	int (*v2_dev_open)(char *devpath);
+	void (*v2_dev_close)(int d);
+	int (*v2_dev_read)(int d, char *buf, int nbytes);
+	int (*v2_dev_write)(int d, char *buf, int nbytes);
+	int (*v2_dev_seek)(int d, int hi, int lo);
+
+	/* Never issued (multistage load support) */
+	void (*v2_wheee2)(void);
+	void (*v2_wheee3)(void);
+};
+
+struct linux_mlist_v0 {
+	struct linux_mlist_v0 *theres_more;
+	unsigned start_adr;
+	unsigned num_bytes;
+};
+
+struct linux_mem_v0 {
+	struct linux_mlist_v0 **v0_totphys;
+	struct linux_mlist_v0 **v0_prommap;
+	struct linux_mlist_v0 **v0_available; /* What we can use */
+};
+
+/* Arguments sent to the kernel from the boot prompt. */
+struct linux_arguments_v0 {
+	char *argv[8];
+	char args[100];
+	char boot_dev[2];
+	int boot_dev_ctrl;
+	int boot_dev_unit;
+	int dev_partition;
+	char *kernel_file_name;
+	void *aieee1;           /* XXX */
+};
+
+/* V2 and up boot things. */
+struct linux_bootargs_v2 {
+	char **bootpath;
+	char **bootargs;
+	int *fd_stdin;
+	int *fd_stdout;
+};
+
+/* The top level PROM vector. */
+struct linux_romvec {
+	/* Version numbers. */
+	unsigned int pv_magic_cookie;
+	unsigned int pv_romvers;
+	unsigned int pv_plugin_revision;
+	unsigned int pv_printrev;
+
+	/* Version 0 memory descriptors. */
+	struct linux_mem_v0 pv_v0mem;
+
+	/* Node operations. */
+	struct linux_nodeops *pv_nodeops;
+
+	char **pv_bootstr;
+	struct linux_dev_v0_funcs pv_v0devops;
+
+	char *pv_stdin;
+	char *pv_stdout;
+#define	PROMDEV_KBD	0		/* input from keyboard */
+#define	PROMDEV_SCREEN	0		/* output to screen */
+#define	PROMDEV_TTYA	1		/* in/out to ttya */
+#define	PROMDEV_TTYB	2		/* in/out to ttyb */
+
+	/* Blocking getchar/putchar.  NOT REENTRANT! (grr) */
+	int (*pv_getchar)(void);
+	void (*pv_putchar)(int ch);
+
+	/* Non-blocking variants. */
+	int (*pv_nbgetchar)(void);
+	int (*pv_nbputchar)(int ch);
+
+	void (*pv_putstr)(char *str, int len);
+
+	/* Miscellany. */
+	void (*pv_reboot)(char *bootstr);
+	void (*pv_printf)(__const__ char *fmt, ...);
+	void (*pv_abort)(void);
+	__volatile__ int *pv_ticks;
+	void (*pv_halt)(void);
+	void (**pv_synchook)(void);
+
+	/* Evaluate a forth string, not different proto for V0 and V2->up. */
+	union {
+		void (*v0_eval)(int len, char *str);
+		void (*v2_eval)(char *str);
+	} pv_fortheval;
+
+	struct linux_arguments_v0 **pv_v0bootargs;
+
+	/* Get ether address. */
+	unsigned int (*pv_enaddr)(int d, char *enaddr);
+
+	struct linux_bootargs_v2 pv_v2bootargs;
+	struct linux_dev_v2_funcs pv_v2devops;
+
+	int filler[15];
+
+	/* This one is sun4c/sun4 only. */
+	void (*pv_setctxt)(int ctxt, char *va, int pmeg);
+
+	/* Prom version 3 Multiprocessor routines. This stuff is crazy.
+	 * No joke. Calling these when there is only one cpu probably
+	 * crashes the machine, have to test this. :-)
+	 */
+
+	/* v3_cpustart() will start the cpu 'whichcpu' in mmu-context
+	 * 'thiscontext' executing at address 'prog_counter'
+	 */
+	int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr,
+			   int thiscontext, char *prog_counter);
+
+	/* v3_cpustop() will cause cpu 'whichcpu' to stop executing
+	 * until a resume cpu call is made.
+	 */
+	int (*v3_cpustop)(unsigned int whichcpu);
+
+	/* v3_cpuidle() will idle cpu 'whichcpu' until a stop or
+	 * resume cpu call is made.
+	 */
+	int (*v3_cpuidle)(unsigned int whichcpu);
+
+	/* v3_cpuresume() will resume processor 'whichcpu' executing
+	 * starting with whatever 'pc' and 'npc' were left at the
+	 * last 'idle' or 'stop' call.
+	 */
+	int (*v3_cpuresume)(unsigned int whichcpu);
+};
+
+/* Routines for traversing the prom device tree. */
+struct linux_nodeops {
+	int (*no_nextnode)(int node);
+	int (*no_child)(int node);
+	int (*no_proplen)(int node, char *name);
+	int (*no_getprop)(int node, char *name, char *val);
+	int (*no_setprop)(int node, char *name, char *val, int len);
+	char * (*no_nextprop)(int node, char *name);
+};
+
+/* More fun PROM structures for device probing. */
+#define PROMREG_MAX     24
+#define PROMVADDR_MAX   16
+#define PROMINTR_MAX    32
+
+struct linux_prom_registers {
+	unsigned which_io;	/* hi part of physical address			*/
+	unsigned phys_addr;	/* The physical address of this register	*/
+	int reg_size;		/* How many bytes does this register take up?	*/
+};
+
+struct linux_prom64_registers {
+	unsigned long phys_addr;
+	unsigned long reg_size;
+};
+
+struct linux_prom_irqs {
+	int pri;    /* IRQ priority */
+	int vector; /* This is foobar, what does it do? */
+};
+
+/* Element of the "ranges" vector */
+struct linux_prom_ranges {
+	unsigned int ot_child_space;
+	unsigned int ot_child_base;		/* Bus feels this */
+	unsigned int ot_parent_space;
+	unsigned int ot_parent_base;		/* CPU looks from here */
+	unsigned int or_size;
+};
+
+struct linux_prom64_ranges {
+	unsigned long ot_child_base;		/* Bus feels this */
+	unsigned long ot_parent_base;		/* CPU looks from here */
+	unsigned long or_size;
+};
+
+/* Ranges and reg properties are a bit different for PCI. */
+struct linux_prom_pci_registers {
+	unsigned int phys_hi;
+	unsigned int phys_mid;
+	unsigned int phys_lo;
+
+	unsigned int size_hi;
+	unsigned int size_lo;
+};
+
+struct linux_prom_pci_ranges {
+	unsigned int child_phys_hi;	/* Only certain bits are encoded here. */
+	unsigned int child_phys_mid;
+	unsigned int child_phys_lo;
+
+	unsigned int parent_phys_hi;
+	unsigned int parent_phys_lo;
+
+	unsigned int size_hi;
+	unsigned int size_lo;
+};
+
+struct linux_prom_pci_intmap {
+	unsigned int phys_hi;
+	unsigned int phys_mid;
+	unsigned int phys_lo;
+
+	unsigned int interrupt;
+
+	int          cnode;
+	unsigned int cinterrupt;
+};
+
+struct linux_prom_pci_intmask {
+	unsigned int phys_hi;
+	unsigned int phys_mid;
+	unsigned int phys_lo;
+	unsigned int interrupt;
+};
+
+struct linux_prom_ebus_ranges {
+	unsigned int child_phys_hi;
+	unsigned int child_phys_lo;
+
+	unsigned int parent_phys_hi;
+	unsigned int parent_phys_mid;
+	unsigned int parent_phys_lo;
+
+	unsigned int size;
+};
+
+struct linux_prom_ebus_intmap {
+	unsigned int phys_hi;
+	unsigned int phys_lo;
+
+	unsigned int interrupt;
+
+	int          cnode;
+	unsigned int cinterrupt;
+};
+
+struct linux_prom_ebus_intmask {
+	unsigned int phys_hi;
+	unsigned int phys_lo;
+	unsigned int interrupt;
+};
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC64_OPENPROM_H) */
diff --git a/arch/sparc/include/asm/openpromio.h b/arch/sparc/include/asm/openpromio.h
new file mode 100644
index 0000000..917fb8e
--- /dev/null
+++ b/arch/sparc/include/asm/openpromio.h
@@ -0,0 +1,69 @@
+#ifndef	_SPARC_OPENPROMIO_H
+#define	_SPARC_OPENPROMIO_H
+
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/*
+ * SunOS and Solaris /dev/openprom definitions. The ioctl values
+ * were chosen to be exactly equal to the SunOS equivalents.
+ */
+
+struct openpromio
+{
+	u_int	oprom_size;		/* Actual size of the oprom_array. */
+	char	oprom_array[1];		/* Holds property names and values. */
+};
+
+#define	OPROMMAXPARAM	4096		/* Maximum size of oprom_array. */
+
+#define	OPROMGETOPT		0x20004F01
+#define	OPROMSETOPT		0x20004F02
+#define	OPROMNXTOPT		0x20004F03
+#define	OPROMSETOPT2		0x20004F04
+#define	OPROMNEXT		0x20004F05
+#define	OPROMCHILD		0x20004F06
+#define	OPROMGETPROP		0x20004F07
+#define	OPROMNXTPROP		0x20004F08
+#define	OPROMU2P		0x20004F09
+#define	OPROMGETCONS		0x20004F0A
+#define	OPROMGETFBNAME		0x20004F0B
+#define	OPROMGETBOOTARGS	0x20004F0C
+/* Linux extensions */				/* Arguments in oprom_array: */
+#define OPROMSETCUR		0x20004FF0	/* int node - Sets current node */
+#define OPROMPCI2NODE		0x20004FF1	/* int pci_bus, pci_devfn - Sets current node to PCI device's node */
+#define OPROMPATH2NODE		0x20004FF2	/* char path[] - Set current node from fully qualified PROM path */
+
+/*
+ * Return values from OPROMGETCONS:
+ */
+
+#define OPROMCONS_NOT_WSCONS    0
+#define OPROMCONS_STDIN_IS_KBD  0x1     /* stdin device is kbd */
+#define OPROMCONS_STDOUT_IS_FB  0x2     /* stdout is a framebuffer */
+#define OPROMCONS_OPENPROM      0x4     /* supports openboot */
+
+
+/*
+ *  NetBSD/OpenBSD /dev/openprom definitions.
+ */
+
+struct opiocdesc
+{
+	int	op_nodeid;		/* PROM Node ID (value-result) */
+	int	op_namelen;		/* Length of op_name. */
+	char	__user *op_name;	/* Pointer to the property name. */
+	int	op_buflen;		/* Length of op_buf (value-result) */
+	char	__user *op_buf;		/* Pointer to buffer. */
+};
+
+#define	OPIOCGET	_IOWR('O', 1, struct opiocdesc)
+#define	OPIOCSET	_IOW('O', 2, struct opiocdesc)
+#define	OPIOCNEXTPROP	_IOWR('O', 3, struct opiocdesc)
+#define	OPIOCGETOPTNODE	_IOR('O', 4, int)
+#define	OPIOCGETNEXT	_IOWR('O', 5, int)
+#define	OPIOCGETCHILD	_IOWR('O', 6, int)
+
+#endif /* _SPARC_OPENPROMIO_H */
+
diff --git a/arch/sparc/include/asm/oplib.h b/arch/sparc/include/asm/oplib.h
new file mode 100644
index 0000000..72e04e1
--- /dev/null
+++ b/arch/sparc/include/asm/oplib.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_OPLIB_H
+#define ___ASM_SPARC_OPLIB_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/oplib_64.h>
+#else
+#include <asm/oplib_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/oplib_32.h b/arch/sparc/include/asm/oplib_32.h
new file mode 100644
index 0000000..b2631da
--- /dev/null
+++ b/arch/sparc/include/asm/oplib_32.h
@@ -0,0 +1,272 @@
+/*
+ * oplib.h:  Describes the interface and available routines in the
+ *           Linux Prom library.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC_OPLIB_H
+#define __SPARC_OPLIB_H
+
+#include <asm/openprom.h>
+#include <linux/spinlock.h>
+#include <linux/compiler.h>
+
+/* The master romvec pointer... */
+extern struct linux_romvec *romvec;
+
+/* Enumeration to describe the prom major version we have detected. */
+enum prom_major_version {
+	PROM_V0,      /* Original sun4c V0 prom */
+	PROM_V2,      /* sun4c and early sun4m V2 prom */
+	PROM_V3,      /* sun4m and later, up to sun4d/sun4e machines V3 */
+	PROM_P1275,   /* IEEE compliant ISA based Sun PROM, only sun4u */
+	PROM_SUN4,    /* Old sun4 proms are totally different, but we'll shoehorn it to make it fit */
+};
+
+extern enum prom_major_version prom_vers;
+/* Revision, and firmware revision. */
+extern unsigned int prom_rev, prom_prev;
+
+/* Root node of the prom device tree, this stays constant after
+ * initialization is complete.
+ */
+extern int prom_root_node;
+
+/* Pointer to prom structure containing the device tree traversal
+ * and usage utility functions.  Only prom-lib should use these,
+ * users use the interface defined by the library only!
+ */
+extern struct linux_nodeops *prom_nodeops;
+
+/* The functions... */
+
+/* You must call prom_init() before using any of the library services,
+ * preferably as early as possible.  Pass it the romvec pointer.
+ */
+extern void prom_init(struct linux_romvec *rom_ptr);
+
+/* Boot argument acquisition, returns the boot command line string. */
+extern char *prom_getbootargs(void);
+
+/* Device utilities. */
+
+/* Map and unmap devices in IO space at virtual addresses. Note that the
+ * virtual address you pass is a request and the prom may put your mappings
+ * somewhere else, so check your return value as that is where your new
+ * mappings really are!
+ *
+ * Another note, these are only available on V2 or higher proms!
+ */
+extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes);
+extern void prom_unmapio(char *virt_addr, unsigned int num_bytes);
+
+/* Device operations. */
+
+/* Open the device described by the passed string.  Note, that the format
+ * of the string is different on V0 vs. V2->higher proms.  The caller must
+ * know what he/she is doing!  Returns the device descriptor, an int.
+ */
+extern int prom_devopen(char *device_string);
+
+/* Close a previously opened device described by the passed integer
+ * descriptor.
+ */
+extern int prom_devclose(int device_handle);
+
+/* Do a seek operation on the device described by the passed integer
+ * descriptor.
+ */
+extern void prom_seek(int device_handle, unsigned int seek_hival,
+		      unsigned int seek_lowval);
+
+/* Miscellaneous routines, don't really fit in any category per se. */
+
+/* Reboot the machine with the command line passed. */
+extern void prom_reboot(char *boot_command);
+
+/* Evaluate the forth string passed. */
+extern void prom_feval(char *forth_string);
+
+/* Enter the prom, with possibility of continuation with the 'go'
+ * command in newer proms.
+ */
+extern void prom_cmdline(void);
+
+/* Enter the prom, with no chance of continuation for the stand-alone
+ * which calls this.
+ */
+extern void prom_halt(void) __attribute__ ((noreturn));
+
+/* Set the PROM 'sync' callback function to the passed function pointer.
+ * When the user gives the 'sync' command at the prom prompt while the
+ * kernel is still active, the prom will call this routine.
+ *
+ * XXX The arguments are different on V0 vs. V2->higher proms, grrr! XXX
+ */
+typedef void (*sync_func_t)(void);
+extern void prom_setsync(sync_func_t func_ptr);
+
+/* Acquire the IDPROM of the root node in the prom device tree.  This
+ * gets passed a buffer where you would like it stuffed.  The return value
+ * is the format type of this idprom or 0xff on error.
+ */
+extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
+
+/* Get the prom major version. */
+extern int prom_version(void);
+
+/* Get the prom plugin revision. */
+extern int prom_getrev(void);
+
+/* Get the prom firmware revision. */
+extern int prom_getprev(void);
+
+/* Character operations to/from the console.... */
+
+/* Non-blocking get character from console. */
+extern int prom_nbgetchar(void);
+
+/* Non-blocking put character to console. */
+extern int prom_nbputchar(char character);
+
+/* Blocking get character from console. */
+extern char prom_getchar(void);
+
+/* Blocking put character to console. */
+extern void prom_putchar(char character);
+
+/* Prom's internal routines, don't use in kernel/boot code. */
+extern void prom_printf(char *fmt, ...);
+extern void prom_write(const char *buf, unsigned int len);
+
+/* Multiprocessor operations... */
+
+/* Start the CPU with the given device tree node, context table, and context
+ * at the passed program counter.
+ */
+extern int prom_startcpu(int cpunode, struct linux_prom_registers *context_table,
+			 int context, char *program_counter);
+
+/* Stop the CPU with the passed device tree node. */
+extern int prom_stopcpu(int cpunode);
+
+/* Idle the CPU with the passed device tree node. */
+extern int prom_idlecpu(int cpunode);
+
+/* Re-Start the CPU with the passed device tree node. */
+extern int prom_restartcpu(int cpunode);
+
+/* PROM memory allocation facilities... */
+
+/* Allocated at possibly the given virtual address a chunk of the
+ * indicated size.
+ */
+extern char *prom_alloc(char *virt_hint, unsigned int size);
+
+/* Free a previously allocated chunk. */
+extern void prom_free(char *virt_addr, unsigned int size);
+
+/* Sun4/sun4c specific memory-management startup hook. */
+
+/* Map the passed segment in the given context at the passed
+ * virtual address.
+ */
+extern void prom_putsegment(int context, unsigned long virt_addr,
+			    int physical_segment);
+
+
+/* PROM device tree traversal functions... */
+
+#ifdef PROMLIB_INTERNAL
+
+/* Internal version of prom_getchild. */
+extern int __prom_getchild(int parent_node);
+
+/* Internal version of prom_getsibling. */
+extern int __prom_getsibling(int node);
+
+#endif
+
+
+/* Get the child node of the given node, or zero if no child exists. */
+extern int prom_getchild(int parent_node);
+
+/* Get the next sibling node of the given node, or zero if no further
+ * siblings exist.
+ */
+extern int prom_getsibling(int node);
+
+/* Get the length, at the passed node, of the given property type.
+ * Returns -1 on error (ie. no such property at this node).
+ */
+extern int prom_getproplen(int thisnode, char *property);
+
+/* Fetch the requested property using the given buffer.  Returns
+ * the number of bytes the prom put into your buffer or -1 on error.
+ */
+extern int __must_check prom_getproperty(int thisnode, char *property,
+					 char *prop_buffer, int propbuf_size);
+
+/* Acquire an integer property. */
+extern int prom_getint(int node, char *property);
+
+/* Acquire an integer property, with a default value. */
+extern int prom_getintdefault(int node, char *property, int defval);
+
+/* Acquire a boolean property, 0=FALSE 1=TRUE. */
+extern int prom_getbool(int node, char *prop);
+
+/* Acquire a string property, null string on error. */
+extern void prom_getstring(int node, char *prop, char *buf, int bufsize);
+
+/* Does the passed node have the given "name"? YES=1 NO=0 */
+extern int prom_nodematch(int thisnode, char *name);
+
+/* Search all siblings starting at the passed node for "name" matching
+ * the given string.  Returns the node on success, zero on failure.
+ */
+extern int prom_searchsiblings(int node_start, char *name);
+
+/* Return the first property type, as a string, for the given node.
+ * Returns a null string on error.
+ */
+extern char *prom_firstprop(int node, char *buffer);
+
+/* Returns the next property after the passed property for the given
+ * node.  Returns null string on failure.
+ */
+extern char *prom_nextprop(int node, char *prev_property, char *buffer);
+
+/* Returns phandle of the path specified */
+extern int prom_finddevice(char *name);
+
+/* Returns 1 if the specified node has given property. */
+extern int prom_node_has_property(int node, char *property);
+
+/* Set the indicated property at the given node with the passed value.
+ * Returns the number of bytes of your value that the prom took.
+ */
+extern int prom_setprop(int node, char *prop_name, char *prop_value,
+			int value_size);
+
+extern int prom_pathtoinode(char *path);
+extern int prom_inst2pkg(int);
+
+/* Dorking with Bus ranges... */
+
+/* Apply promlib probes OBIO ranges to registers. */
+extern void prom_apply_obio_ranges(struct linux_prom_registers *obioregs, int nregs);
+
+/* Apply ranges of any prom node (and optionally parent node as well) to registers. */
+extern void prom_apply_generic_ranges(int node, int parent,
+				      struct linux_prom_registers *sbusregs, int nregs);
+
+/* CPU probing helpers.  */
+int cpu_find_by_instance(int instance, int *prom_node, int *mid);
+int cpu_find_by_mid(int mid, int *prom_node);
+int cpu_get_hwmid(int prom_node);
+
+extern spinlock_t prom_lock;
+
+#endif /* !(__SPARC_OPLIB_H) */
diff --git a/arch/sparc/include/asm/oplib_64.h b/arch/sparc/include/asm/oplib_64.h
new file mode 100644
index 0000000..6d2c2ca
--- /dev/null
+++ b/arch/sparc/include/asm/oplib_64.h
@@ -0,0 +1,322 @@
+/* oplib.h:  Describes the interface and available routines in the
+ *           Linux Prom library.
+ *
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1996 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __SPARC64_OPLIB_H
+#define __SPARC64_OPLIB_H
+
+#include <asm/openprom.h>
+
+/* OBP version string. */
+extern char prom_version[];
+
+/* Root node of the prom device tree, this stays constant after
+ * initialization is complete.
+ */
+extern int prom_root_node;
+
+/* PROM stdin and stdout */
+extern int prom_stdin, prom_stdout;
+
+/* /chosen node of the prom device tree, this stays constant after
+ * initialization is complete.
+ */
+extern int prom_chosen_node;
+
+/* Helper values and strings in arch/sparc64/kernel/head.S */
+extern const char prom_peer_name[];
+extern const char prom_compatible_name[];
+extern const char prom_root_compatible[];
+extern const char prom_cpu_compatible[];
+extern const char prom_finddev_name[];
+extern const char prom_chosen_path[];
+extern const char prom_cpu_path[];
+extern const char prom_getprop_name[];
+extern const char prom_mmu_name[];
+extern const char prom_callmethod_name[];
+extern const char prom_translate_name[];
+extern const char prom_map_name[];
+extern const char prom_unmap_name[];
+extern int prom_mmu_ihandle_cache;
+extern unsigned int prom_boot_mapped_pc;
+extern unsigned int prom_boot_mapping_mode;
+extern unsigned long prom_boot_mapping_phys_high, prom_boot_mapping_phys_low;
+
+struct linux_mlist_p1275 {
+	struct linux_mlist_p1275 *theres_more;
+	unsigned long start_adr;
+	unsigned long num_bytes;
+};
+
+struct linux_mem_p1275 {
+	struct linux_mlist_p1275 **p1275_totphys;
+	struct linux_mlist_p1275 **p1275_prommap;
+	struct linux_mlist_p1275 **p1275_available; /* What we can use */
+};
+
+/* The functions... */
+
+/* You must call prom_init() before using any of the library services,
+ * preferably as early as possible.  Pass it the romvec pointer.
+ */
+extern void prom_init(void *cif_handler, void *cif_stack);
+
+/* Boot argument acquisition, returns the boot command line string. */
+extern char *prom_getbootargs(void);
+
+/* Device utilities. */
+
+/* Device operations. */
+
+/* Open the device described by the passed string.  Note, that the format
+ * of the string is different on V0 vs. V2->higher proms.  The caller must
+ * know what he/she is doing!  Returns the device descriptor, an int.
+ */
+extern int prom_devopen(const char *device_string);
+
+/* Close a previously opened device described by the passed integer
+ * descriptor.
+ */
+extern int prom_devclose(int device_handle);
+
+/* Do a seek operation on the device described by the passed integer
+ * descriptor.
+ */
+extern void prom_seek(int device_handle, unsigned int seek_hival,
+		      unsigned int seek_lowval);
+
+/* Miscellaneous routines, don't really fit in any category per se. */
+
+/* Reboot the machine with the command line passed. */
+extern void prom_reboot(const char *boot_command);
+
+/* Evaluate the forth string passed. */
+extern void prom_feval(const char *forth_string);
+
+/* Enter the prom, with possibility of continuation with the 'go'
+ * command in newer proms.
+ */
+extern void prom_cmdline(void);
+
+/* Enter the prom, with no chance of continuation for the stand-alone
+ * which calls this.
+ */
+extern void prom_halt(void) __attribute__ ((noreturn));
+
+/* Halt and power-off the machine. */
+extern void prom_halt_power_off(void) __attribute__ ((noreturn));
+
+/* Set the PROM 'sync' callback function to the passed function pointer.
+ * When the user gives the 'sync' command at the prom prompt while the
+ * kernel is still active, the prom will call this routine.
+ *
+ */
+typedef int (*callback_func_t)(long *cmd);
+extern void prom_setcallback(callback_func_t func_ptr);
+
+/* Acquire the IDPROM of the root node in the prom device tree.  This
+ * gets passed a buffer where you would like it stuffed.  The return value
+ * is the format type of this idprom or 0xff on error.
+ */
+extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
+
+/* Character operations to/from the console.... */
+
+/* Non-blocking get character from console. */
+extern int prom_nbgetchar(void);
+
+/* Non-blocking put character to console. */
+extern int prom_nbputchar(char character);
+
+/* Blocking get character from console. */
+extern char prom_getchar(void);
+
+/* Blocking put character to console. */
+extern void prom_putchar(char character);
+
+/* Prom's internal routines, don't use in kernel/boot code. */
+extern void prom_printf(const char *fmt, ...);
+extern void prom_write(const char *buf, unsigned int len);
+
+/* Multiprocessor operations... */
+#ifdef CONFIG_SMP
+/* Start the CPU with the given device tree node at the passed program
+ * counter with the given arg passed in via register %o0.
+ */
+extern void prom_startcpu(int cpunode, unsigned long pc, unsigned long arg);
+
+/* Start the CPU with the given cpu ID at the passed program
+ * counter with the given arg passed in via register %o0.
+ */
+extern void prom_startcpu_cpuid(int cpuid, unsigned long pc, unsigned long arg);
+
+/* Stop the CPU with the given cpu ID.  */
+extern void prom_stopcpu_cpuid(int cpuid);
+
+/* Stop the current CPU. */
+extern void prom_stopself(void);
+
+/* Idle the current CPU. */
+extern void prom_idleself(void);
+
+/* Resume the CPU with the passed device tree node. */
+extern void prom_resumecpu(int cpunode);
+#endif
+
+/* Power management interfaces. */
+
+/* Put the current CPU to sleep. */
+extern void prom_sleepself(void);
+
+/* Put the entire system to sleep. */
+extern int prom_sleepsystem(void);
+
+/* Initiate a wakeup event. */
+extern int prom_wakeupsystem(void);
+
+/* MMU and memory related OBP interfaces. */
+
+/* Get unique string identifying SIMM at given physical address. */
+extern int prom_getunumber(int syndrome_code,
+			   unsigned long phys_addr,
+			   char *buf, int buflen);
+
+/* Retain physical memory to the caller across soft resets. */
+extern unsigned long prom_retain(const char *name,
+				 unsigned long pa_low, unsigned long pa_high,
+				 long size, long align);
+
+/* Load explicit I/D TLB entries into the calling processor. */
+extern long prom_itlb_load(unsigned long index,
+			   unsigned long tte_data,
+			   unsigned long vaddr);
+
+extern long prom_dtlb_load(unsigned long index,
+			   unsigned long tte_data,
+			   unsigned long vaddr);
+
+/* Map/Unmap client program address ranges.  First the format of
+ * the mapping mode argument.
+ */
+#define PROM_MAP_WRITE	0x0001 /* Writable */
+#define PROM_MAP_READ	0x0002 /* Readable - sw */
+#define PROM_MAP_EXEC	0x0004 /* Executable - sw */
+#define PROM_MAP_LOCKED	0x0010 /* Locked, use i/dtlb load calls for this instead */
+#define PROM_MAP_CACHED	0x0020 /* Cacheable in both L1 and L2 caches */
+#define PROM_MAP_SE	0x0040 /* Side-Effects */
+#define PROM_MAP_GLOB	0x0080 /* Global */
+#define PROM_MAP_IE	0x0100 /* Invert-Endianness */
+#define PROM_MAP_DEFAULT (PROM_MAP_WRITE | PROM_MAP_READ | PROM_MAP_EXEC | PROM_MAP_CACHED)
+
+extern int prom_map(int mode, unsigned long size,
+		    unsigned long vaddr, unsigned long paddr);
+extern void prom_unmap(unsigned long size, unsigned long vaddr);
+
+
+/* PROM device tree traversal functions... */
+
+#ifdef PROMLIB_INTERNAL
+
+/* Internal version of prom_getchild. */
+extern int __prom_getchild(int parent_node);
+
+/* Internal version of prom_getsibling. */
+extern int __prom_getsibling(int node);
+
+#endif
+
+/* Get the child node of the given node, or zero if no child exists. */
+extern int prom_getchild(int parent_node);
+
+/* Get the next sibling node of the given node, or zero if no further
+ * siblings exist.
+ */
+extern int prom_getsibling(int node);
+
+/* Get the length, at the passed node, of the given property type.
+ * Returns -1 on error (ie. no such property at this node).
+ */
+extern int prom_getproplen(int thisnode, const char *property);
+
+/* Fetch the requested property using the given buffer.  Returns
+ * the number of bytes the prom put into your buffer or -1 on error.
+ */
+extern int prom_getproperty(int thisnode, const char *property,
+			    char *prop_buffer, int propbuf_size);
+
+/* Acquire an integer property. */
+extern int prom_getint(int node, const char *property);
+
+/* Acquire an integer property, with a default value. */
+extern int prom_getintdefault(int node, const char *property, int defval);
+
+/* Acquire a boolean property, 0=FALSE 1=TRUE. */
+extern int prom_getbool(int node, const char *prop);
+
+/* Acquire a string property, null string on error. */
+extern void prom_getstring(int node, const char *prop, char *buf, int bufsize);
+
+/* Does the passed node have the given "name"? YES=1 NO=0 */
+extern int prom_nodematch(int thisnode, const char *name);
+
+/* Search all siblings starting at the passed node for "name" matching
+ * the given string.  Returns the node on success, zero on failure.
+ */
+extern int prom_searchsiblings(int node_start, const char *name);
+
+/* Return the first property type, as a string, for the given node.
+ * Returns a null string on error. Buffer should be at least 32B long.
+ */
+extern char *prom_firstprop(int node, char *buffer);
+
+/* Returns the next property after the passed property for the given
+ * node.  Returns null string on failure. Buffer should be at least 32B long.
+ */
+extern char *prom_nextprop(int node, const char *prev_property, char *buffer);
+
+/* Returns 1 if the specified node has given property. */
+extern int prom_node_has_property(int node, const char *property);
+
+/* Returns phandle of the path specified */
+extern int prom_finddevice(const char *name);
+
+/* Set the indicated property at the given node with the passed value.
+ * Returns the number of bytes of your value that the prom took.
+ */
+extern int prom_setprop(int node, const char *prop_name, char *prop_value,
+			int value_size);
+
+extern int prom_pathtoinode(const char *path);
+extern int prom_inst2pkg(int);
+extern int prom_service_exists(const char *service_name);
+extern void prom_sun4v_guest_soft_state(void);
+
+extern int prom_ihandle2path(int handle, char *buffer, int bufsize);
+
+/* Client interface level routines. */
+extern long p1275_cmd(const char *, long, ...);
+
+#if 0
+#define P1275_SIZE(x) ((((long)((x) / 32)) << 32) | (x))
+#else
+#define P1275_SIZE(x) x
+#endif
+
+/* We support at most 16 input and 1 output argument */
+#define P1275_ARG_NUMBER		0
+#define P1275_ARG_IN_STRING		1
+#define P1275_ARG_OUT_BUF		2
+#define P1275_ARG_OUT_32B		3
+#define P1275_ARG_IN_FUNCTION		4
+#define P1275_ARG_IN_BUF		5
+#define P1275_ARG_IN_64B		6
+
+#define P1275_IN(x) ((x) & 0xf)
+#define P1275_OUT(x) (((x) << 4) & 0xf0)
+#define P1275_INOUT(i,o) (P1275_IN(i)|P1275_OUT(o))
+#define P1275_ARG(n,x) ((x) << ((n)*3 + 8))
+
+#endif /* !(__SPARC64_OPLIB_H) */
diff --git a/arch/sparc/include/asm/page.h b/arch/sparc/include/asm/page.h
new file mode 100644
index 0000000..f21de03
--- /dev/null
+++ b/arch/sparc/include/asm/page.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PAGE_H
+#define ___ASM_SPARC_PAGE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/page_64.h>
+#else
+#include <asm/page_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/page_32.h b/arch/sparc/include/asm/page_32.h
new file mode 100644
index 0000000..cf5fb70
--- /dev/null
+++ b/arch/sparc/include/asm/page_32.h
@@ -0,0 +1,160 @@
+/*
+ * page.h:  Various defines and such for MMU operations on the Sparc for
+ *          the Linux kernel.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_PAGE_H
+#define _SPARC_PAGE_H
+
+#ifdef CONFIG_SUN4
+#define PAGE_SHIFT   13
+#else
+#define PAGE_SHIFT   12
+#endif
+#ifndef __ASSEMBLY__
+/* I have my suspicions... -DaveM */
+#define PAGE_SIZE    (1UL << PAGE_SHIFT)
+#else
+#define PAGE_SIZE    (1 << PAGE_SHIFT)
+#endif
+#define PAGE_MASK    (~(PAGE_SIZE-1))
+
+#include <asm/btfixup.h>
+
+#ifndef __ASSEMBLY__
+
+#define clear_page(page)	 memset((void *)(page), 0, PAGE_SIZE)
+#define copy_page(to,from) 	memcpy((void *)(to), (void *)(from), PAGE_SIZE)
+#define clear_user_page(addr, vaddr, page)	\
+	do { 	clear_page(addr);		\
+		sparc_flush_page_to_ram(page);	\
+	} while (0)
+#define copy_user_page(to, from, vaddr, page)	\
+	do {	copy_page(to, from);		\
+		sparc_flush_page_to_ram(page);	\
+	} while (0)
+
+/* The following structure is used to hold the physical
+ * memory configuration of the machine.  This is filled in
+ * prom_meminit() and is later used by mem_init() to set up
+ * mem_map[].  We statically allocate SPARC_PHYS_BANKS+1 of
+ * these structs, this is arbitrary.  The entry after the
+ * last valid one has num_bytes==0.
+ */
+struct sparc_phys_banks {
+  unsigned long base_addr;
+  unsigned long num_bytes;
+};
+
+#define SPARC_PHYS_BANKS 32
+
+extern struct sparc_phys_banks sp_banks[SPARC_PHYS_BANKS+1];
+
+/* Cache alias structure.  Entry is valid if context != -1. */
+struct cache_palias {
+	unsigned long vaddr;
+	int context;
+};
+
+/* passing structs on the Sparc slow us down tremendously... */
+
+/* #define STRICT_MM_TYPECHECKS */
+
+#ifdef STRICT_MM_TYPECHECKS
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long iopte; } iopte_t;
+typedef struct { unsigned long pmdv[16]; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long ctxd; } ctxd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct { unsigned long iopgprot; } iopgprot_t;
+
+#define pte_val(x)	((x).pte)
+#define iopte_val(x)	((x).iopte)
+#define pmd_val(x)      ((x).pmdv[0])
+#define pgd_val(x)	((x).pgd)
+#define ctxd_val(x)	((x).ctxd)
+#define pgprot_val(x)	((x).pgprot)
+#define iopgprot_val(x)	((x).iopgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __iopte(x)	((iopte_t) { (x) } )
+/* #define __pmd(x)        ((pmd_t) { (x) } ) */ /* XXX procedure with loop */
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __ctxd(x)	((ctxd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+#define __iopgprot(x)	((iopgprot_t) { (x) } )
+
+#else
+/*
+ * .. while these make it easier on the compiler
+ */
+typedef unsigned long pte_t;
+typedef unsigned long iopte_t;
+typedef struct { unsigned long pmdv[16]; } pmd_t;
+typedef unsigned long pgd_t;
+typedef unsigned long ctxd_t;
+typedef unsigned long pgprot_t;
+typedef unsigned long iopgprot_t;
+
+#define pte_val(x)	(x)
+#define iopte_val(x)	(x)
+#define pmd_val(x)      ((x).pmdv[0])
+#define pgd_val(x)	(x)
+#define ctxd_val(x)	(x)
+#define pgprot_val(x)	(x)
+#define iopgprot_val(x)	(x)
+
+#define __pte(x)	(x)
+#define __iopte(x)	(x)
+/* #define __pmd(x)        (x) */ /* XXX later */
+#define __pgd(x)	(x)
+#define __ctxd(x)	(x)
+#define __pgprot(x)	(x)
+#define __iopgprot(x)	(x)
+
+#endif
+
+typedef struct page *pgtable_t;
+
+extern unsigned long sparc_unmapped_base;
+
+BTFIXUPDEF_SETHI(sparc_unmapped_base)
+
+#define TASK_UNMAPPED_BASE	BTFIXUP_SETHI(sparc_unmapped_base)
+
+#else /* !(__ASSEMBLY__) */
+
+#define __pgprot(x)	(x)
+
+#endif /* !(__ASSEMBLY__) */
+
+#define PAGE_OFFSET	0xf0000000
+#ifndef __ASSEMBLY__
+extern unsigned long phys_base;
+extern unsigned long pfn_base;
+#endif
+#define __pa(x)			((unsigned long)(x) - PAGE_OFFSET + phys_base)
+#define __va(x)			((void *)((unsigned long) (x) - phys_base + PAGE_OFFSET))
+
+#define virt_to_phys		__pa
+#define phys_to_virt		__va
+
+#define ARCH_PFN_OFFSET		(pfn_base)
+#define virt_to_page(kaddr)	(mem_map + ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT)))
+
+#define pfn_valid(pfn)		(((pfn) >= (pfn_base)) && (((pfn)-(pfn_base)) < max_mapnr))
+#define virt_addr_valid(kaddr)	((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT) < max_mapnr)
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+#endif /* _SPARC_PAGE_H */
diff --git a/arch/sparc/include/asm/page_64.h b/arch/sparc/include/asm/page_64.h
new file mode 100644
index 0000000..b579b91
--- /dev/null
+++ b/arch/sparc/include/asm/page_64.h
@@ -0,0 +1,135 @@
+#ifndef _SPARC64_PAGE_H
+#define _SPARC64_PAGE_H
+
+#include <linux/const.h>
+
+#if defined(CONFIG_SPARC64_PAGE_SIZE_8KB)
+#define PAGE_SHIFT   13
+#elif defined(CONFIG_SPARC64_PAGE_SIZE_64KB)
+#define PAGE_SHIFT   16
+#else
+#error No page size specified in kernel configuration
+#endif
+
+#define PAGE_SIZE    (_AC(1,UL) << PAGE_SHIFT)
+#define PAGE_MASK    (~(PAGE_SIZE-1))
+
+/* Flushing for D-cache alias handling is only needed if
+ * the page size is smaller than 16K.
+ */
+#if PAGE_SHIFT < 14
+#define DCACHE_ALIASING_POSSIBLE
+#endif
+
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#define HPAGE_SHIFT		22
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K)
+#define HPAGE_SHIFT		19
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define HPAGE_SHIFT		16
+#endif
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HPAGE_SIZE		(_AC(1,UL) << HPAGE_SHIFT)
+#define HPAGE_MASK		(~(HPAGE_SIZE - 1UL))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+#endif
+
+#ifndef __ASSEMBLY__
+
+extern void _clear_page(void *page);
+#define clear_page(X)	_clear_page((void *)(X))
+struct page;
+extern void clear_user_page(void *addr, unsigned long vaddr, struct page *page);
+#define copy_page(X,Y)	memcpy((void *)(X), (void *)(Y), PAGE_SIZE)
+extern void copy_user_page(void *to, void *from, unsigned long vaddr, struct page *topage);
+
+/* Unlike sparc32, sparc64's parameter passing API is more
+ * sane in that structures which as small enough are passed
+ * in registers instead of on the stack.  Thus, setting
+ * STRICT_MM_TYPECHECKS does not generate worse code so
+ * let's enable it to get the type checking.
+ */
+
+#define STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+/* These are used to make use of C type-checking.. */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long iopte; } iopte_t;
+typedef struct { unsigned int pmd; } pmd_t;
+typedef struct { unsigned int pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)	((x).pte)
+#define iopte_val(x)	((x).iopte)
+#define pmd_val(x)      ((x).pmd)
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __iopte(x)	((iopte_t) { (x) } )
+#define __pmd(x)        ((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+#else
+/* .. while these make it easier on the compiler */
+typedef unsigned long pte_t;
+typedef unsigned long iopte_t;
+typedef unsigned int pmd_t;
+typedef unsigned int pgd_t;
+typedef unsigned long pgprot_t;
+
+#define pte_val(x)	(x)
+#define iopte_val(x)	(x)
+#define pmd_val(x)      (x)
+#define pgd_val(x)	(x)
+#define pgprot_val(x)	(x)
+
+#define __pte(x)	(x)
+#define __iopte(x)	(x)
+#define __pmd(x)        (x)
+#define __pgd(x)	(x)
+#define __pgprot(x)	(x)
+
+#endif /* (STRICT_MM_TYPECHECKS) */
+
+typedef struct page *pgtable_t;
+
+#define TASK_UNMAPPED_BASE	(test_thread_flag(TIF_32BIT) ? \
+				 (_AC(0x0000000070000000,UL)) : \
+				 (_AC(0xfffff80000000000,UL) + (1UL << 32UL)))
+
+#include <asm-generic/memory_model.h>
+
+#endif /* !(__ASSEMBLY__) */
+
+/* We used to stick this into a hard-coded global register (%g4)
+ * but that does not make sense anymore.
+ */
+#define PAGE_OFFSET		_AC(0xFFFFF80000000000,UL)
+
+#ifndef __ASSEMBLY__
+
+#define __pa(x)			((unsigned long)(x) - PAGE_OFFSET)
+#define __va(x)			((void *)((unsigned long) (x) + PAGE_OFFSET))
+
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr)>>PAGE_SHIFT)
+
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define virt_to_phys __pa
+#define phys_to_virt __va
+
+#endif /* !(__ASSEMBLY__) */
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/page.h>
+
+#endif /* _SPARC64_PAGE_H */
diff --git a/arch/sparc/include/asm/param.h b/arch/sparc/include/asm/param.h
new file mode 100644
index 0000000..9836d9a
--- /dev/null
+++ b/arch/sparc/include/asm/param.h
@@ -0,0 +1,22 @@
+#ifndef _ASMSPARC_PARAM_H
+#define _ASMSPARC_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
+# define USER_HZ	100	/* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC (USER_HZ)
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	8192    /* Thanks for sun4's we carry baggage... */
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif
diff --git a/arch/sparc/include/asm/parport.h b/arch/sparc/include/asm/parport.h
new file mode 100644
index 0000000..7818b25
--- /dev/null
+++ b/arch/sparc/include/asm/parport.h
@@ -0,0 +1,246 @@
+/* parport.h: sparc64 specific parport initialization and dma.
+ *
+ * Copyright (C) 1999  Eddie C. Dost  (ecd@skynet.be)
+ */
+
+#ifndef _ASM_SPARC64_PARPORT_H
+#define _ASM_SPARC64_PARPORT_H 1
+
+#include <asm/ebus.h>
+#include <asm/ns87303.h>
+#include <asm/of_device.h>
+#include <asm/prom.h>
+
+#define PARPORT_PC_MAX_PORTS	PARPORT_MAX
+
+/*
+ * While sparc64 doesn't have an ISA DMA API, we provide something that looks
+ * close enough to make parport_pc happy
+ */
+#define HAS_DMA
+
+static DEFINE_SPINLOCK(dma_spin_lock);
+
+#define claim_dma_lock() \
+({	unsigned long flags; \
+	spin_lock_irqsave(&dma_spin_lock, flags); \
+	flags; \
+})
+
+#define release_dma_lock(__flags) \
+	spin_unlock_irqrestore(&dma_spin_lock, __flags);
+
+static struct sparc_ebus_info {
+	struct ebus_dma_info info;
+	unsigned int addr;
+	unsigned int count;
+	int lock;
+
+	struct parport *port;
+} sparc_ebus_dmas[PARPORT_PC_MAX_PORTS];
+
+static DECLARE_BITMAP(dma_slot_map, PARPORT_PC_MAX_PORTS);
+
+static inline int request_dma(unsigned int dmanr, const char *device_id)
+{
+	if (dmanr >= PARPORT_PC_MAX_PORTS)
+		return -EINVAL;
+	if (xchg(&sparc_ebus_dmas[dmanr].lock, 1) != 0)
+		return -EBUSY;
+	return 0;
+}
+
+static inline void free_dma(unsigned int dmanr)
+{
+	if (dmanr >= PARPORT_PC_MAX_PORTS) {
+		printk(KERN_WARNING "Trying to free DMA%d\n", dmanr);
+		return;
+	}
+	if (xchg(&sparc_ebus_dmas[dmanr].lock, 0) == 0) {
+		printk(KERN_WARNING "Trying to free free DMA%d\n", dmanr);
+		return;
+	}
+}
+
+static inline void enable_dma(unsigned int dmanr)
+{
+	ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 1);
+
+	if (ebus_dma_request(&sparc_ebus_dmas[dmanr].info,
+			     sparc_ebus_dmas[dmanr].addr,
+			     sparc_ebus_dmas[dmanr].count))
+		BUG();
+}
+
+static inline void disable_dma(unsigned int dmanr)
+{
+	ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 0);
+}
+
+static inline void clear_dma_ff(unsigned int dmanr)
+{
+	/* nothing */
+}
+
+static inline void set_dma_mode(unsigned int dmanr, char mode)
+{
+	ebus_dma_prepare(&sparc_ebus_dmas[dmanr].info, (mode != DMA_MODE_WRITE));
+}
+
+static inline void set_dma_addr(unsigned int dmanr, unsigned int addr)
+{
+	sparc_ebus_dmas[dmanr].addr = addr;
+}
+
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+	sparc_ebus_dmas[dmanr].count = count;
+}
+
+static inline unsigned int get_dma_residue(unsigned int dmanr)
+{
+	return ebus_dma_residue(&sparc_ebus_dmas[dmanr].info);
+}
+
+static int __devinit ecpp_probe(struct of_device *op, const struct of_device_id *match)
+{
+	unsigned long base = op->resource[0].start;
+	unsigned long config = op->resource[1].start;
+	unsigned long d_base = op->resource[2].start;
+	unsigned long d_len;
+	struct device_node *parent;
+	struct parport *p;
+	int slot, err;
+
+	parent = op->node->parent;
+	if (!strcmp(parent->name, "dma")) {
+		p = parport_pc_probe_port(base, base + 0x400,
+					  op->irqs[0], PARPORT_DMA_NOFIFO,
+					  op->dev.parent->parent);
+		if (!p)
+			return -ENOMEM;
+		dev_set_drvdata(&op->dev, p);
+		return 0;
+	}
+
+	for (slot = 0; slot < PARPORT_PC_MAX_PORTS; slot++) {
+		if (!test_and_set_bit(slot, dma_slot_map))
+			break;
+	}
+	err = -ENODEV;
+	if (slot >= PARPORT_PC_MAX_PORTS)
+		goto out_err;
+
+	spin_lock_init(&sparc_ebus_dmas[slot].info.lock);
+
+	d_len = (op->resource[2].end - d_base) + 1UL;
+	sparc_ebus_dmas[slot].info.regs =
+		of_ioremap(&op->resource[2], 0, d_len, "ECPP DMA");
+
+	if (!sparc_ebus_dmas[slot].info.regs)
+		goto out_clear_map;
+
+	sparc_ebus_dmas[slot].info.flags = 0;
+	sparc_ebus_dmas[slot].info.callback = NULL;
+	sparc_ebus_dmas[slot].info.client_cookie = NULL;
+	sparc_ebus_dmas[slot].info.irq = 0xdeadbeef;
+	strcpy(sparc_ebus_dmas[slot].info.name, "parport");
+	if (ebus_dma_register(&sparc_ebus_dmas[slot].info))
+		goto out_unmap_regs;
+
+	ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 1);
+
+	/* Configure IRQ to Push Pull, Level Low */
+	/* Enable ECP, set bit 2 of the CTR first */
+	outb(0x04, base + 0x02);
+	ns87303_modify(config, PCR,
+		       PCR_EPP_ENABLE |
+		       PCR_IRQ_ODRAIN,
+		       PCR_ECP_ENABLE |
+		       PCR_ECP_CLK_ENA |
+		       PCR_IRQ_POLAR);
+
+	/* CTR bit 5 controls direction of port */
+	ns87303_modify(config, PTR,
+		       0, PTR_LPT_REG_DIR);
+
+	p = parport_pc_probe_port(base, base + 0x400,
+				  op->irqs[0],
+				  slot,
+				  op->dev.parent);
+	err = -ENOMEM;
+	if (!p)
+		goto out_disable_irq;
+
+	dev_set_drvdata(&op->dev, p);
+
+	return 0;
+
+out_disable_irq:
+	ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 0);
+	ebus_dma_unregister(&sparc_ebus_dmas[slot].info);
+
+out_unmap_regs:
+	of_iounmap(&op->resource[2], sparc_ebus_dmas[slot].info.regs, d_len);
+
+out_clear_map:
+	clear_bit(slot, dma_slot_map);
+
+out_err:
+	return err;
+}
+
+static int __devexit ecpp_remove(struct of_device *op)
+{
+	struct parport *p = dev_get_drvdata(&op->dev);
+	int slot = p->dma;
+
+	parport_pc_unregister_port(p);
+
+	if (slot != PARPORT_DMA_NOFIFO) {
+		unsigned long d_base = op->resource[2].start;
+		unsigned long d_len;
+
+		d_len = (op->resource[2].end - d_base) + 1UL;
+
+		ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 0);
+		ebus_dma_unregister(&sparc_ebus_dmas[slot].info);
+		of_iounmap(&op->resource[2],
+			   sparc_ebus_dmas[slot].info.regs,
+			   d_len);
+		clear_bit(slot, dma_slot_map);
+	}
+
+	return 0;
+}
+
+static struct of_device_id ecpp_match[] = {
+	{
+		.name = "ecpp",
+	},
+	{
+		.name = "parallel",
+		.compatible = "ecpp",
+	},
+	{
+		.name = "parallel",
+		.compatible = "ns87317-ecpp",
+	},
+	{},
+};
+
+static struct of_platform_driver ecpp_driver = {
+	.name			= "ecpp",
+	.match_table		= ecpp_match,
+	.probe			= ecpp_probe,
+	.remove			= __devexit_p(ecpp_remove),
+};
+
+static int parport_pc_find_nonpci_ports(int autoirq, int autodma)
+{
+	of_register_driver(&ecpp_driver, &of_bus_type);
+
+	return 0;
+}
+
+#endif /* !(_ASM_SPARC64_PARPORT_H */
diff --git a/arch/sparc/include/asm/pbm.h b/arch/sparc/include/asm/pbm.h
new file mode 100644
index 0000000..458a491
--- /dev/null
+++ b/arch/sparc/include/asm/pbm.h
@@ -0,0 +1,47 @@
+/*
+ *
+ * pbm.h: PCI bus module pseudo driver software state
+ *        Adopted from sparc64 by V. Roganov and G. Raiko
+ *
+ * Original header:
+ * pbm.h: U2P PCI bus module pseudo driver software state.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * To put things into perspective, consider sparc64 with a few PCI controllers.
+ * Each type would have an own structure, with instances related one to one.
+ * We have only pcic on sparc, but we want to be compatible with sparc64 pbm.h.
+ * All three represent different abstractions.
+ *   pci_bus  - Linux PCI subsystem view of a PCI bus (including bridged buses)
+ *   pbm      - Arch-specific view of a PCI bus (sparc or sparc64)
+ *   pcic     - Chip-specific information for PCIC.
+ */
+
+#ifndef __SPARC_PBM_H
+#define __SPARC_PBM_H
+
+#include <linux/pci.h>
+#include <asm/oplib.h>
+#include <asm/prom.h>
+
+struct linux_pbm_info {
+	int		prom_node;
+	char		prom_name[64];
+	/* struct linux_prom_pci_ranges	pbm_ranges[PROMREG_MAX]; */
+	/* int		num_pbm_ranges; */
+
+	/* Now things for the actual PCI bus probes. */
+	unsigned int	pci_first_busno;	/* Can it be nonzero? */
+	struct pci_bus	*pci_bus;		/* Was inline, MJ allocs now */
+};
+
+/* PCI devices which are not bridges have this placed in their pci_dev
+ * sysdata member.  This makes OBP aware PCI device drivers easier to
+ * code.
+ */
+struct pcidev_cookie {
+	struct linux_pbm_info		*pbm;
+	struct device_node		*prom_node;
+};
+
+#endif /* !(__SPARC_PBM_H) */
diff --git a/arch/sparc/include/asm/pci.h b/arch/sparc/include/asm/pci.h
new file mode 100644
index 0000000..6e14fd1
--- /dev/null
+++ b/arch/sparc/include/asm/pci.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PCI_H
+#define ___ASM_SPARC_PCI_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/pci_64.h>
+#else
+#include <asm/pci_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/pci_32.h b/arch/sparc/include/asm/pci_32.h
new file mode 100644
index 0000000..0ee949d
--- /dev/null
+++ b/arch/sparc/include/asm/pci_32.h
@@ -0,0 +1,171 @@
+#ifndef __SPARC_PCI_H
+#define __SPARC_PCI_H
+
+#ifdef __KERNEL__
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+ * already-configured bus numbers - to be used for buggy BIOSes
+ * or architectures with incomplete PCI setup by the loader.
+ */
+#define pcibios_assign_all_busses()	0
+#define pcibios_scan_all_fns(a, b)	0
+
+#define PCIBIOS_MIN_IO		0UL
+#define PCIBIOS_MIN_MEM		0UL
+
+#define PCI_IRQ_NONE		0xffffffff
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/* Dynamic DMA mapping stuff.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(0)
+
+#include <asm/scatterlist.h>
+
+struct pci_dev;
+
+/* Allocate and map kernel buffer using consistent mode DMA for a device.
+ * hwdev should be valid struct pci_dev pointer for PCI devices.
+ */
+extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle);
+
+/* Free and unmap a consistent DMA buffer.
+ * cpu_addr is what was returned from pci_alloc_consistent,
+ * size must be the same as what as passed into pci_alloc_consistent,
+ * and likewise dma_addr must be the same as what *dma_addrp was set to.
+ *
+ * References to the memory and mappings assosciated with cpu_addr/dma_addr
+ * past this call are illegal.
+ */
+extern void pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle);
+
+/* Map a single buffer of the indicated size for DMA in streaming mode.
+ * The 32-bit bus address to use is returned.
+ *
+ * Once the device is given the dma address, the device owns this memory
+ * until either pci_unmap_single or pci_dma_sync_single_for_cpu is performed.
+ */
+extern dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction);
+
+/* Unmap a single streaming mode DMA translation.  The dma_addr and size
+ * must match what was provided for in a previous pci_map_single call.  All
+ * other usages are undefined.
+ *
+ * After this call, reads by the cpu to the buffer are guaranteed to see
+ * whatever the device wrote there.
+ */
+extern void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t size, int direction);
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+/*
+ * Same as above, only with pages instead of mapped addresses.
+ */
+extern dma_addr_t pci_map_page(struct pci_dev *hwdev, struct page *page,
+			unsigned long offset, size_t size, int direction);
+extern void pci_unmap_page(struct pci_dev *hwdev,
+			dma_addr_t dma_address, size_t size, int direction);
+
+/* Map a set of buffers described by scatterlist in streaming
+ * mode for DMA.  This is the scather-gather version of the
+ * above pci_map_single interface.  Here the scatter gather list
+ * elements are each tagged with the appropriate dma address
+ * and length.  They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of
+ *       DMA address/length pairs than there are SG table elements.
+ *       (for example via virtual mapping capabilities)
+ *       The routine returns the number of addr/length pairs actually
+ *       used, at most nents.
+ *
+ * Device ownership issues as mentioned above for pci_map_single are
+ * the same here.
+ */
+extern int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents, int direction);
+
+/* Unmap a set of streaming mode DMA translations.
+ * Again, cpu read rules concerning calls here are the same as for
+ * pci_unmap_single() above.
+ */
+extern void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nhwents, int direction);
+
+/* Make physical memory consistent for a single
+ * streaming mode DMA translation after a transfer.
+ *
+ * If you perform a pci_map_single() but wish to interrogate the
+ * buffer using the cpu, yet do not wish to teardown the PCI dma
+ * mapping, you must call this function before doing so.  At the
+ * next point you give the PCI dma address back to the card, you
+ * must first perform a pci_dma_sync_for_device, and then the device
+ * again owns the buffer.
+ */
+extern void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction);
+extern void pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction);
+
+/* Make physical memory consistent for a set of streaming
+ * mode DMA translations after a transfer.
+ *
+ * The same as pci_dma_sync_single_* but for a scatter-gather list,
+ * same rules and usage.
+ */
+extern void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
+extern void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
+
+/* Return whether the given PCI device DMA address mask can
+ * be supported properly.  For example, if your device can
+ * only drive the low 24-bits during PCI bus mastering, then
+ * you would pass 0x00ffffff as the mask to this function.
+ */
+static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
+{
+	return 1;
+}
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
+#define PCI_DMA_ERROR_CODE      (~(dma_addr_t)0x0)
+
+static inline int pci_dma_mapping_error(struct pci_dev *pdev,
+					dma_addr_t dma_addr)
+{
+        return (dma_addr == PCI_DMA_ERROR_CODE);
+}
+
+struct device_node;
+extern struct device_node *pci_device_to_OF_node(struct pci_dev *pdev);
+
+#endif /* __KERNEL__ */
+
+/* generic pci stuff */
+#include <asm-generic/pci.h>
+
+#endif /* __SPARC_PCI_H */
diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h
new file mode 100644
index 0000000..4f79a54
--- /dev/null
+++ b/arch/sparc/include/asm/pci_64.h
@@ -0,0 +1,210 @@
+#ifndef __SPARC64_PCI_H
+#define __SPARC64_PCI_H
+
+#ifdef __KERNEL__
+
+#include <linux/dma-mapping.h>
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+ * already-configured bus numbers - to be used for buggy BIOSes
+ * or architectures with incomplete PCI setup by the loader.
+ */
+#define pcibios_assign_all_busses()	0
+#define pcibios_scan_all_fns(a, b)	0
+
+#define PCIBIOS_MIN_IO		0UL
+#define PCIBIOS_MIN_MEM		0UL
+
+#define PCI_IRQ_NONE		0xffffffff
+
+#define PCI_CACHE_LINE_BYTES	64
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/* The PCI address space does not equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(0)
+
+static inline void *pci_alloc_consistent(struct pci_dev *pdev, size_t size,
+					 dma_addr_t *dma_handle)
+{
+	return dma_alloc_coherent(&pdev->dev, size, dma_handle, GFP_ATOMIC);
+}
+
+static inline void pci_free_consistent(struct pci_dev *pdev, size_t size,
+				       void *vaddr, dma_addr_t dma_handle)
+{
+	return dma_free_coherent(&pdev->dev, size, vaddr, dma_handle);
+}
+
+static inline dma_addr_t pci_map_single(struct pci_dev *pdev, void *ptr,
+					size_t size, int direction)
+{
+	return dma_map_single(&pdev->dev, ptr, size,
+			      (enum dma_data_direction) direction);
+}
+
+static inline void pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr,
+				    size_t size, int direction)
+{
+	dma_unmap_single(&pdev->dev, dma_addr, size,
+			 (enum dma_data_direction) direction);
+}
+
+#define pci_map_page(dev, page, off, size, dir) \
+	pci_map_single(dev, (page_address(page) + (off)), size, dir)
+#define pci_unmap_page(dev,addr,sz,dir) \
+	pci_unmap_single(dev,addr,sz,dir)
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+static inline int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sg,
+			     int nents, int direction)
+{
+	return dma_map_sg(&pdev->dev, sg, nents,
+			  (enum dma_data_direction) direction);
+}
+
+static inline void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg,
+				int nents, int direction)
+{
+	dma_unmap_sg(&pdev->dev, sg, nents,
+		     (enum dma_data_direction) direction);
+}
+
+static inline void pci_dma_sync_single_for_cpu(struct pci_dev *pdev,
+					       dma_addr_t dma_handle,
+					       size_t size, int direction)
+{
+	dma_sync_single_for_cpu(&pdev->dev, dma_handle, size,
+				(enum dma_data_direction) direction);
+}
+
+static inline void pci_dma_sync_single_for_device(struct pci_dev *pdev,
+						  dma_addr_t dma_handle,
+						  size_t size, int direction)
+{
+	/* No flushing needed to sync cpu writes to the device.  */
+}
+
+static inline void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev,
+					   struct scatterlist *sg,
+					   int nents, int direction)
+{
+	dma_sync_sg_for_cpu(&pdev->dev, sg, nents,
+			    (enum dma_data_direction) direction);
+}
+
+static inline void pci_dma_sync_sg_for_device(struct pci_dev *pdev,
+					      struct scatterlist *sg,
+					      int nelems, int direction)
+{
+	/* No flushing needed to sync cpu writes to the device.  */
+}
+
+/* Return whether the given PCI device DMA address mask can
+ * be supported properly.  For example, if your device can
+ * only drive the low 24-bits during PCI bus mastering, then
+ * you would pass 0x00ffffff as the mask to this function.
+ */
+extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask);
+
+/* PCI IOMMU mapping bypass support. */
+
+/* PCI 64-bit addressing works for all slots on all controller
+ * types on sparc64.  However, it requires that the device
+ * can drive enough of the 64 bits.
+ */
+#define PCI64_REQUIRED_MASK	(~(dma64_addr_t)0)
+#define PCI64_ADDR_BASE		0xfffc000000000000UL
+
+static inline int pci_dma_mapping_error(struct pci_dev *pdev,
+					dma_addr_t dma_addr)
+{
+	return dma_mapping_error(&pdev->dev, dma_addr);
+}
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	unsigned long cacheline_size;
+	u8 byte;
+
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
+	if (byte == 0)
+		cacheline_size = 1024;
+	else
+		cacheline_size = (int) byte * 4;
+
+	*strat = PCI_DMA_BURST_BOUNDARY;
+	*strategy_parameter = cacheline_size;
+}
+#endif
+
+/* Return the index of the PCI controller for device PDEV. */
+
+extern int pci_domain_nr(struct pci_bus *bus);
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	return 1;
+}
+
+/* Platform support for /proc/bus/pci/X/Y mmap()s. */
+
+#define HAVE_PCI_MMAP
+#define HAVE_ARCH_PCI_GET_UNMAPPED_AREA
+#define get_pci_unmapped_area get_fb_unmapped_area
+
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+			       enum pci_mmap_state mmap_state,
+			       int write_combine);
+
+extern void
+pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+			struct resource *res);
+
+extern void
+pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+			struct pci_bus_region *region);
+
+extern struct resource *pcibios_select_root(struct pci_dev *, struct resource *);
+
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	return PCI_IRQ_NONE;
+}
+
+struct device_node;
+extern struct device_node *pci_device_to_OF_node(struct pci_dev *pdev);
+
+#define HAVE_ARCH_PCI_RESOURCE_TO_USER
+extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
+				 const struct resource *rsrc,
+				 resource_size_t *start, resource_size_t *end);
+#endif /* __KERNEL__ */
+
+#endif /* __SPARC64_PCI_H */
diff --git a/arch/sparc/include/asm/pcic.h b/arch/sparc/include/asm/pcic.h
new file mode 100644
index 0000000..f20ef56
--- /dev/null
+++ b/arch/sparc/include/asm/pcic.h
@@ -0,0 +1,123 @@
+/*
+ * pcic.h: JavaEngine 1 specific PCI definitions.
+ *
+ * Copyright (C) 1998 V. Roganov and G. Raiko
+ */
+
+#ifndef __SPARC_PCIC_H
+#define __SPARC_PCIC_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/smp.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <asm/pbm.h>
+
+struct linux_pcic {
+        void __iomem            *pcic_regs;
+        unsigned long           pcic_io;
+        void __iomem            *pcic_config_space_addr;
+        void __iomem            *pcic_config_space_data;
+	struct resource		pcic_res_regs;
+	struct resource		pcic_res_io;
+	struct resource		pcic_res_cfg_addr;
+	struct resource		pcic_res_cfg_data;
+        struct linux_pbm_info   pbm;
+	struct pcic_ca2irq	*pcic_imap;
+	int			pcic_imdim;
+};
+
+extern int pcic_probe(void);
+/* Erm... MJ redefined pcibios_present() so that it does not work early. */
+extern int pcic_present(void);
+extern void sun4m_pci_init_IRQ(void);
+
+#endif
+
+/* Size of PCI I/O space which we relocate. */
+#define PCI_SPACE_SIZE                  0x1000000       /* 16 MB */
+
+/* PCIC Register Set. */
+#define PCI_DIAGNOSTIC_0                0x40    /* 32 bits */
+#define PCI_SIZE_0                      0x44    /* 32 bits */
+#define PCI_SIZE_1                      0x48    /* 32 bits */
+#define PCI_SIZE_2                      0x4c    /* 32 bits */
+#define PCI_SIZE_3                      0x50    /* 32 bits */
+#define PCI_SIZE_4                      0x54    /* 32 bits */
+#define PCI_SIZE_5                      0x58    /* 32 bits */
+#define PCI_PIO_CONTROL                 0x60    /* 8  bits */
+#define PCI_DVMA_CONTROL                0x62    /* 8  bits */
+#define  PCI_DVMA_CONTROL_INACTIVITY_REQ        (1<<0)
+#define  PCI_DVMA_CONTROL_IOTLB_ENABLE          (1<<0)
+#define  PCI_DVMA_CONTROL_IOTLB_DISABLE         0
+#define  PCI_DVMA_CONTROL_INACTIVITY_ACK        (1<<4)
+#define PCI_INTERRUPT_CONTROL           0x63    /* 8  bits */
+#define PCI_CPU_INTERRUPT_PENDING       0x64    /* 32 bits */
+#define PCI_DIAGNOSTIC_1                0x68    /* 16 bits */
+#define PCI_SOFTWARE_INT_CLEAR          0x6a    /* 16 bits */
+#define PCI_SOFTWARE_INT_SET            0x6e    /* 16 bits */
+#define PCI_SYS_INT_PENDING             0x70    /* 32 bits */
+#define  PCI_SYS_INT_PENDING_PIO		0x40000000
+#define  PCI_SYS_INT_PENDING_DMA		0x20000000
+#define  PCI_SYS_INT_PENDING_PCI		0x10000000
+#define  PCI_SYS_INT_PENDING_APSR		0x08000000
+#define PCI_SYS_INT_TARGET_MASK         0x74    /* 32 bits */
+#define PCI_SYS_INT_TARGET_MASK_CLEAR   0x78    /* 32 bits */
+#define PCI_SYS_INT_TARGET_MASK_SET     0x7c    /* 32 bits */
+#define PCI_SYS_INT_PENDING_CLEAR       0x83    /* 8  bits */
+#define  PCI_SYS_INT_PENDING_CLEAR_ALL		0x80
+#define  PCI_SYS_INT_PENDING_CLEAR_PIO		0x40
+#define  PCI_SYS_INT_PENDING_CLEAR_DMA		0x20
+#define  PCI_SYS_INT_PENDING_CLEAR_PCI		0x10
+#define PCI_IOTLB_CONTROL               0x84    /* 8  bits */
+#define PCI_INT_SELECT_LO               0x88    /* 16 bits */
+#define PCI_ARBITRATION_SELECT          0x8a    /* 16 bits */
+#define PCI_INT_SELECT_HI               0x8c    /* 16 bits */
+#define PCI_HW_INT_OUTPUT               0x8e    /* 16 bits */
+#define PCI_IOTLB_RAM_INPUT             0x90    /* 32 bits */
+#define PCI_IOTLB_CAM_INPUT             0x94    /* 32 bits */
+#define PCI_IOTLB_RAM_OUTPUT            0x98    /* 32 bits */
+#define PCI_IOTLB_CAM_OUTPUT            0x9c    /* 32 bits */
+#define PCI_SMBAR0                      0xa0    /* 8  bits */
+#define PCI_MSIZE0                      0xa1    /* 8  bits */
+#define PCI_PMBAR0                      0xa2    /* 8  bits */
+#define PCI_SMBAR1                      0xa4    /* 8  bits */
+#define PCI_MSIZE1                      0xa5    /* 8  bits */
+#define PCI_PMBAR1                      0xa6    /* 8  bits */
+#define PCI_SIBAR                       0xa8    /* 8  bits */
+#define   PCI_SIBAR_ADDRESS_MASK        0xf
+#define PCI_ISIZE                       0xa9    /* 8  bits */
+#define   PCI_ISIZE_16M                 0xf
+#define   PCI_ISIZE_32M                 0xe
+#define   PCI_ISIZE_64M                 0xc
+#define   PCI_ISIZE_128M                0x8
+#define   PCI_ISIZE_256M                0x0
+#define PCI_PIBAR                       0xaa    /* 8  bits */
+#define PCI_CPU_COUNTER_LIMIT_HI        0xac    /* 32 bits */
+#define PCI_CPU_COUNTER_LIMIT_LO        0xb0    /* 32 bits */
+#define PCI_CPU_COUNTER_LIMIT           0xb4    /* 32 bits */
+#define PCI_SYS_LIMIT                   0xb8    /* 32 bits */
+#define PCI_SYS_COUNTER                 0xbc    /* 32 bits */
+#define   PCI_SYS_COUNTER_OVERFLOW      (1<<31) /* Limit reached */
+#define PCI_SYS_LIMIT_PSEUDO            0xc0    /* 32 bits */
+#define PCI_USER_TIMER_CONTROL          0xc4    /* 8  bits */
+#define PCI_USER_TIMER_CONFIG           0xc5    /* 8  bits */
+#define PCI_COUNTER_IRQ                 0xc6    /* 8  bits */
+#define  PCI_COUNTER_IRQ_SET(sys_irq, cpu_irq)  ((((sys_irq) & 0xf) << 4) | \
+                                                  ((cpu_irq) & 0xf))
+#define  PCI_COUNTER_IRQ_SYS(v)                 (((v) >> 4) & 0xf)
+#define  PCI_COUNTER_IRQ_CPU(v)                 ((v) & 0xf)
+#define PCI_PIO_ERROR_COMMAND           0xc7    /* 8  bits */
+#define PCI_PIO_ERROR_ADDRESS           0xc8    /* 32 bits */
+#define PCI_IOTLB_ERROR_ADDRESS         0xcc    /* 32 bits */
+#define PCI_SYS_STATUS                  0xd0    /* 8  bits */
+#define   PCI_SYS_STATUS_RESET_ENABLE           (1<<0)
+#define   PCI_SYS_STATUS_RESET                  (1<<1)
+#define   PCI_SYS_STATUS_WATCHDOG_RESET         (1<<4)
+#define   PCI_SYS_STATUS_PCI_RESET              (1<<5)
+#define   PCI_SYS_STATUS_PCI_RESET_ENABLE       (1<<6)
+#define   PCI_SYS_STATUS_PCI_SATTELITE_MODE     (1<<7)
+
+#endif /* !(__SPARC_PCIC_H) */
diff --git a/arch/sparc/include/asm/percpu.h b/arch/sparc/include/asm/percpu.h
new file mode 100644
index 0000000..bfb1d19
--- /dev/null
+++ b/arch/sparc/include/asm/percpu.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PERCPU_H
+#define ___ASM_SPARC_PERCPU_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/percpu_64.h>
+#else
+#include <asm/percpu_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/percpu_32.h b/arch/sparc/include/asm/percpu_32.h
new file mode 100644
index 0000000..06066a7
--- /dev/null
+++ b/arch/sparc/include/asm/percpu_32.h
@@ -0,0 +1,6 @@
+#ifndef __ARCH_SPARC_PERCPU__
+#define __ARCH_SPARC_PERCPU__
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_SPARC_PERCPU__ */
diff --git a/arch/sparc/include/asm/percpu_64.h b/arch/sparc/include/asm/percpu_64.h
new file mode 100644
index 0000000..bee6459
--- /dev/null
+++ b/arch/sparc/include/asm/percpu_64.h
@@ -0,0 +1,28 @@
+#ifndef __ARCH_SPARC64_PERCPU__
+#define __ARCH_SPARC64_PERCPU__
+
+#include <linux/compiler.h>
+
+register unsigned long __local_per_cpu_offset asm("g5");
+
+#ifdef CONFIG_SMP
+
+extern void real_setup_per_cpu_areas(void);
+
+extern unsigned long __per_cpu_base;
+extern unsigned long __per_cpu_shift;
+#define __per_cpu_offset(__cpu) \
+	(__per_cpu_base + ((unsigned long)(__cpu) << __per_cpu_shift))
+#define per_cpu_offset(x) (__per_cpu_offset(x))
+
+#define __my_cpu_offset __local_per_cpu_offset
+
+#else /* ! SMP */
+
+#define real_setup_per_cpu_areas()		do { } while (0)
+
+#endif	/* SMP */
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_SPARC64_PERCPU__ */
diff --git a/arch/sparc/include/asm/perfctr.h b/arch/sparc/include/asm/perfctr.h
new file mode 100644
index 0000000..8368730
--- /dev/null
+++ b/arch/sparc/include/asm/perfctr.h
@@ -0,0 +1,173 @@
+/*----------------------------------------
+  PERFORMANCE INSTRUMENTATION  
+  Guillaume Thouvenin           08/10/98
+  David S. Miller               10/06/98
+  ---------------------------------------*/
+#ifndef PERF_COUNTER_API
+#define PERF_COUNTER_API
+
+/* sys_perfctr() interface.  First arg is operation code
+ * from enumeration below.  The meaning of further arguments
+ * are determined by the operation code.
+ *
+ * int sys_perfctr(int opcode, unsigned long arg0,
+ *                 unsigned long arg1, unsigned long arg2)
+ *
+ * Pointers which are passed by the user are pointers to 64-bit
+ * integers.
+ *
+ * Once enabled, performance counter state is retained until the
+ * process either exits or performs an exec.  That is, performance
+ * counters remain enabled for fork/clone children.
+ */
+enum perfctr_opcode {
+	/* Enable UltraSparc performance counters, ARG0 is pointer
+	 * to 64-bit accumulator for D0 counter in PIC, ARG1 is pointer
+	 * to 64-bit accumulator for D1 counter.  ARG2 is a pointer to
+	 * the initial PCR register value to use.
+	 */
+	PERFCTR_ON,
+
+	/* Disable UltraSparc performance counters.  The PCR is written
+	 * with zero and the user counter accumulator pointers and
+	 * working PCR register value are forgotten.
+	 */
+	PERFCTR_OFF,
+
+	/* Add current D0 and D1 PIC values into user pointers given
+	 * in PERFCTR_ON operation.  The PIC is cleared before returning.
+	 */
+	PERFCTR_READ,
+
+	/* Clear the PIC register. */
+	PERFCTR_CLRPIC,
+
+	/* Begin using a new PCR value, the pointer to which is passed
+	 * in ARG0.  The PIC is also cleared after the new PCR value is
+	 * written.
+	 */
+	PERFCTR_SETPCR,
+
+	/* Store in pointer given in ARG0 the current PCR register value
+	 * being used.
+	 */
+	PERFCTR_GETPCR
+};
+
+/* I don't want the kernel's namespace to be polluted with this
+ * stuff when this file is included.  --DaveM
+ */
+#ifndef __KERNEL__
+
+#define  PRIV 0x00000001
+#define  SYS  0x00000002
+#define  USR  0x00000004
+
+/* Pic.S0 Selection Bit Field Encoding, Ultra-I/II  */
+#define  CYCLE_CNT            0x00000000
+#define  INSTR_CNT            0x00000010
+#define  DISPATCH0_IC_MISS    0x00000020
+#define  DISPATCH0_STOREBUF   0x00000030
+#define  IC_REF               0x00000080
+#define  DC_RD                0x00000090
+#define  DC_WR                0x000000A0
+#define  LOAD_USE             0x000000B0
+#define  EC_REF               0x000000C0
+#define  EC_WRITE_HIT_RDO     0x000000D0
+#define  EC_SNOOP_INV         0x000000E0
+#define  EC_RD_HIT            0x000000F0
+
+/* Pic.S0 Selection Bit Field Encoding, Ultra-III  */
+#define  US3_CYCLE_CNT	      	0x00000000
+#define  US3_INSTR_CNT	      	0x00000010
+#define  US3_DISPATCH0_IC_MISS	0x00000020
+#define  US3_DISPATCH0_BR_TGT	0x00000030
+#define  US3_DISPATCH0_2ND_BR	0x00000040
+#define  US3_RSTALL_STOREQ	0x00000050
+#define  US3_RSTALL_IU_USE	0x00000060
+#define  US3_IC_REF		0x00000080
+#define  US3_DC_RD		0x00000090
+#define  US3_DC_WR		0x000000a0
+#define  US3_EC_REF		0x000000c0
+#define  US3_EC_WR_HIT_RTO	0x000000d0
+#define  US3_EC_SNOOP_INV	0x000000e0
+#define  US3_EC_RD_MISS		0x000000f0
+#define  US3_PC_PORT0_RD	0x00000100
+#define  US3_SI_SNOOP		0x00000110
+#define  US3_SI_CIQ_FLOW	0x00000120
+#define  US3_SI_OWNED		0x00000130
+#define  US3_SW_COUNT_0		0x00000140
+#define  US3_IU_BR_MISS_TAKEN	0x00000150
+#define  US3_IU_BR_COUNT_TAKEN	0x00000160
+#define  US3_DISP_RS_MISPRED	0x00000170
+#define  US3_FA_PIPE_COMPL	0x00000180
+#define  US3_MC_READS_0		0x00000200
+#define  US3_MC_READS_1		0x00000210
+#define  US3_MC_READS_2		0x00000220
+#define  US3_MC_READS_3		0x00000230
+#define  US3_MC_STALLS_0	0x00000240
+#define  US3_MC_STALLS_2	0x00000250
+
+/* Pic.S1 Selection Bit Field Encoding, Ultra-I/II  */
+#define  CYCLE_CNT_D1         0x00000000
+#define  INSTR_CNT_D1         0x00000800
+#define  DISPATCH0_IC_MISPRED 0x00001000
+#define  DISPATCH0_FP_USE     0x00001800
+#define  IC_HIT               0x00004000
+#define  DC_RD_HIT            0x00004800
+#define  DC_WR_HIT            0x00005000
+#define  LOAD_USE_RAW         0x00005800
+#define  EC_HIT               0x00006000
+#define  EC_WB                0x00006800
+#define  EC_SNOOP_CB          0x00007000
+#define  EC_IT_HIT            0x00007800
+
+/* Pic.S1 Selection Bit Field Encoding, Ultra-III  */
+#define  US3_CYCLE_CNT_D1	0x00000000
+#define  US3_INSTR_CNT_D1	0x00000800
+#define  US3_DISPATCH0_MISPRED	0x00001000
+#define  US3_IC_MISS_CANCELLED	0x00001800
+#define  US3_RE_ENDIAN_MISS	0x00002000
+#define  US3_RE_FPU_BYPASS	0x00002800
+#define  US3_RE_DC_MISS		0x00003000
+#define  US3_RE_EC_MISS		0x00003800
+#define  US3_IC_MISS		0x00004000
+#define  US3_DC_RD_MISS		0x00004800
+#define  US3_DC_WR_MISS		0x00005000
+#define  US3_RSTALL_FP_USE	0x00005800
+#define  US3_EC_MISSES		0x00006000
+#define  US3_EC_WB		0x00006800
+#define  US3_EC_SNOOP_CB	0x00007000
+#define  US3_EC_IC_MISS		0x00007800
+#define  US3_RE_PC_MISS		0x00008000
+#define  US3_ITLB_MISS		0x00008800
+#define  US3_DTLB_MISS		0x00009000
+#define  US3_WC_MISS		0x00009800
+#define  US3_WC_SNOOP_CB	0x0000a000
+#define  US3_WC_SCRUBBED	0x0000a800
+#define  US3_WC_WB_WO_READ	0x0000b000
+#define  US3_PC_SOFT_HIT	0x0000c000
+#define  US3_PC_SNOOP_INV	0x0000c800
+#define  US3_PC_HARD_HIT	0x0000d000
+#define  US3_PC_PORT1_RD	0x0000d800
+#define  US3_SW_COUNT_1		0x0000e000
+#define  US3_IU_STAT_BR_MIS_UNTAKEN	0x0000e800
+#define  US3_IU_STAT_BR_COUNT_UNTAKEN	0x0000f000
+#define  US3_PC_MS_MISSES	0x0000f800
+#define  US3_MC_WRITES_0	0x00010800
+#define  US3_MC_WRITES_1	0x00011000
+#define  US3_MC_WRITES_2	0x00011800
+#define  US3_MC_WRITES_3	0x00012000
+#define  US3_MC_STALLS_1	0x00012800
+#define  US3_MC_STALLS_3	0x00013000
+#define  US3_RE_RAW_MISS	0x00013800
+#define  US3_FM_PIPE_COMPLETION	0x00014000
+
+struct vcounter_struct {
+  unsigned long long vcnt0;
+  unsigned long long vcnt1;
+};
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(PERF_COUNTER_API) */
diff --git a/arch/sparc/include/asm/pgalloc.h b/arch/sparc/include/asm/pgalloc.h
new file mode 100644
index 0000000..b6db1f7
--- /dev/null
+++ b/arch/sparc/include/asm/pgalloc.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PGALLOC_H
+#define ___ASM_SPARC_PGALLOC_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/pgalloc_64.h>
+#else
+#include <asm/pgalloc_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/pgalloc_32.h b/arch/sparc/include/asm/pgalloc_32.h
new file mode 100644
index 0000000..681582d
--- /dev/null
+++ b/arch/sparc/include/asm/pgalloc_32.h
@@ -0,0 +1,68 @@
+#ifndef _SPARC_PGALLOC_H
+#define _SPARC_PGALLOC_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+#include <asm/page.h>
+#include <asm/btfixup.h>
+
+struct page;
+
+extern struct pgtable_cache_struct {
+	unsigned long *pgd_cache;
+	unsigned long *pte_cache;
+	unsigned long pgtable_cache_sz;
+	unsigned long pgd_cache_sz;
+} pgt_quicklists;
+#define pgd_quicklist           (pgt_quicklists.pgd_cache)
+#define pmd_quicklist           ((unsigned long *)0)
+#define pte_quicklist           (pgt_quicklists.pte_cache)
+#define pgtable_cache_size      (pgt_quicklists.pgtable_cache_sz)
+#define pgd_cache_size		(pgt_quicklists.pgd_cache_sz)
+
+extern void check_pgt_cache(void);
+BTFIXUPDEF_CALL(void,	 do_check_pgt_cache, int, int)
+#define do_check_pgt_cache(low,high) BTFIXUP_CALL(do_check_pgt_cache)(low,high)
+
+BTFIXUPDEF_CALL(pgd_t *, get_pgd_fast, void)
+#define get_pgd_fast()		BTFIXUP_CALL(get_pgd_fast)()
+
+BTFIXUPDEF_CALL(void, free_pgd_fast, pgd_t *)
+#define free_pgd_fast(pgd)	BTFIXUP_CALL(free_pgd_fast)(pgd)
+
+#define pgd_free(mm, pgd)	free_pgd_fast(pgd)
+#define pgd_alloc(mm)	get_pgd_fast()
+
+BTFIXUPDEF_CALL(void, pgd_set, pgd_t *, pmd_t *)
+#define pgd_set(pgdp,pmdp) BTFIXUP_CALL(pgd_set)(pgdp,pmdp)
+#define pgd_populate(MM, PGD, PMD)      pgd_set(PGD, PMD)
+
+BTFIXUPDEF_CALL(pmd_t *, pmd_alloc_one, struct mm_struct *, unsigned long)
+#define pmd_alloc_one(mm, address)	BTFIXUP_CALL(pmd_alloc_one)(mm, address)
+
+BTFIXUPDEF_CALL(void, free_pmd_fast, pmd_t *)
+#define free_pmd_fast(pmd)	BTFIXUP_CALL(free_pmd_fast)(pmd)
+
+#define pmd_free(mm, pmd)	free_pmd_fast(pmd)
+#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd)
+
+BTFIXUPDEF_CALL(void, pmd_populate, pmd_t *, struct page *)
+#define pmd_populate(MM, PMD, PTE)        BTFIXUP_CALL(pmd_populate)(PMD, PTE)
+#define pmd_pgtable(pmd) pmd_page(pmd)
+BTFIXUPDEF_CALL(void, pmd_set, pmd_t *, pte_t *)
+#define pmd_populate_kernel(MM, PMD, PTE) BTFIXUP_CALL(pmd_set)(PMD, PTE)
+
+BTFIXUPDEF_CALL(pgtable_t , pte_alloc_one, struct mm_struct *, unsigned long)
+#define pte_alloc_one(mm, address)	BTFIXUP_CALL(pte_alloc_one)(mm, address)
+BTFIXUPDEF_CALL(pte_t *, pte_alloc_one_kernel, struct mm_struct *, unsigned long)
+#define pte_alloc_one_kernel(mm, addr)	BTFIXUP_CALL(pte_alloc_one_kernel)(mm, addr)
+
+BTFIXUPDEF_CALL(void, free_pte_fast, pte_t *)
+#define pte_free_kernel(mm, pte)	BTFIXUP_CALL(free_pte_fast)(pte)
+
+BTFIXUPDEF_CALL(void, pte_free, pgtable_t )
+#define pte_free(mm, pte)	BTFIXUP_CALL(pte_free)(pte)
+#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, pte)
+
+#endif /* _SPARC_PGALLOC_H */
diff --git a/arch/sparc/include/asm/pgalloc_64.h b/arch/sparc/include/asm/pgalloc_64.h
new file mode 100644
index 0000000..5bdfa2c
--- /dev/null
+++ b/arch/sparc/include/asm/pgalloc_64.h
@@ -0,0 +1,81 @@
+#ifndef _SPARC64_PGALLOC_H
+#define _SPARC64_PGALLOC_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/quicklist.h>
+
+#include <asm/spitfire.h>
+#include <asm/cpudata.h>
+#include <asm/cacheflush.h>
+#include <asm/page.h>
+
+/* Page table allocation/freeing. */
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	return quicklist_alloc(0, GFP_KERNEL, NULL);
+}
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	quicklist_free(0, NULL, pgd);
+}
+
+#define pud_populate(MM, PUD, PMD)	pud_set(PUD, PMD)
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return quicklist_alloc(0, GFP_KERNEL, NULL);
+}
+
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+	quicklist_free(0, NULL, pmd);
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+					  unsigned long address)
+{
+	return quicklist_alloc(0, GFP_KERNEL, NULL);
+}
+
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
+					unsigned long address)
+{
+	struct page *page;
+	void *pg;
+
+	pg = quicklist_alloc(0, GFP_KERNEL, NULL);
+	if (!pg)
+		return NULL;
+	page = virt_to_page(pg);
+	pgtable_page_ctor(page);
+	return page;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	quicklist_free(0, NULL, pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage)
+{
+	pgtable_page_dtor(ptepage);
+	quicklist_free_page(0, NULL, ptepage);
+}
+
+
+#define pmd_populate_kernel(MM, PMD, PTE)	pmd_set(PMD, PTE)
+#define pmd_populate(MM,PMD,PTE_PAGE)		\
+	pmd_populate_kernel(MM,PMD,page_address(PTE_PAGE))
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+static inline void check_pgt_cache(void)
+{
+	quicklist_trim(0, NULL, 25, 16);
+}
+
+#endif /* _SPARC64_PGALLOC_H */
diff --git a/arch/sparc/include/asm/pgtable.h b/arch/sparc/include/asm/pgtable.h
new file mode 100644
index 0000000..59ba6f6
--- /dev/null
+++ b/arch/sparc/include/asm/pgtable.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PGTABLE_H
+#define ___ASM_SPARC_PGTABLE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/pgtable_64.h>
+#else
+#include <asm/pgtable_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h
new file mode 100644
index 0000000..08237fd
--- /dev/null
+++ b/arch/sparc/include/asm/pgtable_32.h
@@ -0,0 +1,480 @@
+#ifndef _SPARC_PGTABLE_H
+#define _SPARC_PGTABLE_H
+
+/*  asm/pgtable.h:  Defines and functions used to work
+ *                        with Sparc page tables.
+ *
+ *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *  Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __ASSEMBLY__
+#include <asm-generic/4level-fixup.h>
+
+#include <linux/spinlock.h>
+#include <linux/swap.h>
+#include <asm/types.h>
+#ifdef CONFIG_SUN4
+#include <asm/pgtsun4.h>
+#else
+#include <asm/pgtsun4c.h>
+#endif
+#include <asm/pgtsrmmu.h>
+#include <asm/vac-ops.h>
+#include <asm/oplib.h>
+#include <asm/btfixup.h>
+#include <asm/system.h>
+
+
+struct vm_area_struct;
+struct page;
+
+extern void load_mmu(void);
+extern unsigned long calc_highpages(void);
+
+BTFIXUPDEF_SIMM13(pgdir_shift)
+BTFIXUPDEF_SETHI(pgdir_size)
+BTFIXUPDEF_SETHI(pgdir_mask)
+
+BTFIXUPDEF_SIMM13(ptrs_per_pmd)
+BTFIXUPDEF_SIMM13(ptrs_per_pgd)
+BTFIXUPDEF_SIMM13(user_ptrs_per_pgd)
+
+#define pte_ERROR(e)   __builtin_trap()
+#define pmd_ERROR(e)   __builtin_trap()
+#define pgd_ERROR(e)   __builtin_trap()
+
+BTFIXUPDEF_INT(page_none)
+BTFIXUPDEF_INT(page_copy)
+BTFIXUPDEF_INT(page_readonly)
+BTFIXUPDEF_INT(page_kernel)
+
+#define PMD_SHIFT		SUN4C_PMD_SHIFT
+#define PMD_SIZE        	(1UL << PMD_SHIFT)
+#define PMD_MASK        	(~(PMD_SIZE-1))
+#define PMD_ALIGN(__addr) 	(((__addr) + ~PMD_MASK) & PMD_MASK)
+#define PGDIR_SHIFT     	BTFIXUP_SIMM13(pgdir_shift)
+#define PGDIR_SIZE      	BTFIXUP_SETHI(pgdir_size)
+#define PGDIR_MASK      	BTFIXUP_SETHI(pgdir_mask)
+#define PTRS_PER_PTE    	1024
+#define PTRS_PER_PMD    	BTFIXUP_SIMM13(ptrs_per_pmd)
+#define PTRS_PER_PGD    	BTFIXUP_SIMM13(ptrs_per_pgd)
+#define USER_PTRS_PER_PGD	BTFIXUP_SIMM13(user_ptrs_per_pgd)
+#define FIRST_USER_ADDRESS	0
+#define PTE_SIZE		(PTRS_PER_PTE*4)
+
+#define PAGE_NONE      __pgprot(BTFIXUP_INT(page_none))
+extern pgprot_t PAGE_SHARED;
+#define PAGE_COPY      __pgprot(BTFIXUP_INT(page_copy))
+#define PAGE_READONLY  __pgprot(BTFIXUP_INT(page_readonly))
+
+extern unsigned long page_kernel;
+
+#ifdef MODULE
+#define PAGE_KERNEL	page_kernel
+#else
+#define PAGE_KERNEL    __pgprot(BTFIXUP_INT(page_kernel))
+#endif
+
+/* Top-level page directory */
+extern pgd_t swapper_pg_dir[1024];
+
+extern void paging_init(void);
+
+/* Page table for 0-4MB for everybody, on the Sparc this
+ * holds the same as on the i386.
+ */
+extern pte_t pg0[1024];
+extern pte_t pg1[1024];
+extern pte_t pg2[1024];
+extern pte_t pg3[1024];
+
+extern unsigned long ptr_in_current_pgd;
+
+/* Here is a trick, since mmap.c need the initializer elements for
+ * protection_map[] to be constant at compile time, I set the following
+ * to all zeros.  I set it to the real values after I link in the
+ * appropriate MMU page table routines at boot time.
+ */
+#define __P000  __pgprot(0)
+#define __P001  __pgprot(0)
+#define __P010  __pgprot(0)
+#define __P011  __pgprot(0)
+#define __P100  __pgprot(0)
+#define __P101  __pgprot(0)
+#define __P110  __pgprot(0)
+#define __P111  __pgprot(0)
+
+#define __S000	__pgprot(0)
+#define __S001	__pgprot(0)
+#define __S010	__pgprot(0)
+#define __S011	__pgprot(0)
+#define __S100	__pgprot(0)
+#define __S101	__pgprot(0)
+#define __S110	__pgprot(0)
+#define __S111	__pgprot(0)
+
+extern int num_contexts;
+
+/* First physical page can be anywhere, the following is needed so that
+ * va-->pa and vice versa conversions work properly without performance
+ * hit for all __pa()/__va() operations.
+ */
+extern unsigned long phys_base;
+extern unsigned long pfn_base;
+
+/*
+ * BAD_PAGETABLE is used when we need a bogus page-table, while
+ * BAD_PAGE is used for a bogus page.
+ *
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern pte_t * __bad_pagetable(void);
+extern pte_t __bad_page(void);
+extern unsigned long empty_zero_page;
+
+#define BAD_PAGETABLE __bad_pagetable()
+#define BAD_PAGE __bad_page()
+#define ZERO_PAGE(vaddr) (virt_to_page(&empty_zero_page))
+
+/*
+ */
+BTFIXUPDEF_CALL_CONST(struct page *, pmd_page, pmd_t)
+BTFIXUPDEF_CALL_CONST(unsigned long, pgd_page_vaddr, pgd_t)
+
+#define pmd_page(pmd) BTFIXUP_CALL(pmd_page)(pmd)
+#define pgd_page_vaddr(pgd) BTFIXUP_CALL(pgd_page_vaddr)(pgd)
+
+BTFIXUPDEF_SETHI(none_mask)
+BTFIXUPDEF_CALL_CONST(int, pte_present, pte_t)
+BTFIXUPDEF_CALL(void, pte_clear, pte_t *)
+
+static inline int pte_none(pte_t pte)
+{
+	return !(pte_val(pte) & ~BTFIXUP_SETHI(none_mask));
+}
+
+#define pte_present(pte) BTFIXUP_CALL(pte_present)(pte)
+#define pte_clear(mm,addr,pte) BTFIXUP_CALL(pte_clear)(pte)
+
+BTFIXUPDEF_CALL_CONST(int, pmd_bad, pmd_t)
+BTFIXUPDEF_CALL_CONST(int, pmd_present, pmd_t)
+BTFIXUPDEF_CALL(void, pmd_clear, pmd_t *)
+
+static inline int pmd_none(pmd_t pmd)
+{
+	return !(pmd_val(pmd) & ~BTFIXUP_SETHI(none_mask));
+}
+
+#define pmd_bad(pmd) BTFIXUP_CALL(pmd_bad)(pmd)
+#define pmd_present(pmd) BTFIXUP_CALL(pmd_present)(pmd)
+#define pmd_clear(pmd) BTFIXUP_CALL(pmd_clear)(pmd)
+
+BTFIXUPDEF_CALL_CONST(int, pgd_none, pgd_t)
+BTFIXUPDEF_CALL_CONST(int, pgd_bad, pgd_t)
+BTFIXUPDEF_CALL_CONST(int, pgd_present, pgd_t)
+BTFIXUPDEF_CALL(void, pgd_clear, pgd_t *)
+
+#define pgd_none(pgd) BTFIXUP_CALL(pgd_none)(pgd)
+#define pgd_bad(pgd) BTFIXUP_CALL(pgd_bad)(pgd)
+#define pgd_present(pgd) BTFIXUP_CALL(pgd_present)(pgd)
+#define pgd_clear(pgd) BTFIXUP_CALL(pgd_clear)(pgd)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+BTFIXUPDEF_HALF(pte_writei)
+BTFIXUPDEF_HALF(pte_dirtyi)
+BTFIXUPDEF_HALF(pte_youngi)
+
+static int pte_write(pte_t pte) __attribute_const__;
+static inline int pte_write(pte_t pte)
+{
+	return pte_val(pte) & BTFIXUP_HALF(pte_writei);
+}
+
+static int pte_dirty(pte_t pte) __attribute_const__;
+static inline int pte_dirty(pte_t pte)
+{
+	return pte_val(pte) & BTFIXUP_HALF(pte_dirtyi);
+}
+
+static int pte_young(pte_t pte) __attribute_const__;
+static inline int pte_young(pte_t pte)
+{
+	return pte_val(pte) & BTFIXUP_HALF(pte_youngi);
+}
+
+/*
+ * The following only work if pte_present() is not true.
+ */
+BTFIXUPDEF_HALF(pte_filei)
+
+static int pte_file(pte_t pte) __attribute_const__;
+static inline int pte_file(pte_t pte)
+{
+	return pte_val(pte) & BTFIXUP_HALF(pte_filei);
+}
+
+static inline int pte_special(pte_t pte)
+{
+	return 0;
+}
+
+/*
+ */
+BTFIXUPDEF_HALF(pte_wrprotecti)
+BTFIXUPDEF_HALF(pte_mkcleani)
+BTFIXUPDEF_HALF(pte_mkoldi)
+
+static pte_t pte_wrprotect(pte_t pte) __attribute_const__;
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_wrprotecti));
+}
+
+static pte_t pte_mkclean(pte_t pte) __attribute_const__;
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkcleani));
+}
+
+static pte_t pte_mkold(pte_t pte) __attribute_const__;
+static inline pte_t pte_mkold(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkoldi));
+}
+
+BTFIXUPDEF_CALL_CONST(pte_t, pte_mkwrite, pte_t)
+BTFIXUPDEF_CALL_CONST(pte_t, pte_mkdirty, pte_t)
+BTFIXUPDEF_CALL_CONST(pte_t, pte_mkyoung, pte_t)
+
+#define pte_mkwrite(pte) BTFIXUP_CALL(pte_mkwrite)(pte)
+#define pte_mkdirty(pte) BTFIXUP_CALL(pte_mkdirty)(pte)
+#define pte_mkyoung(pte) BTFIXUP_CALL(pte_mkyoung)(pte)
+
+#define pte_mkspecial(pte)    (pte)
+
+#define pfn_pte(pfn, prot)		mk_pte(pfn_to_page(pfn), prot)
+
+BTFIXUPDEF_CALL(unsigned long,	 pte_pfn, pte_t)
+#define pte_pfn(pte) BTFIXUP_CALL(pte_pfn)(pte)
+#define pte_page(pte)	pfn_to_page(pte_pfn(pte))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+BTFIXUPDEF_CALL_CONST(pte_t, mk_pte, struct page *, pgprot_t)
+
+BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_phys, unsigned long, pgprot_t)
+BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_io, unsigned long, pgprot_t, int)
+BTFIXUPDEF_CALL_CONST(pgprot_t, pgprot_noncached, pgprot_t)
+
+#define mk_pte(page,pgprot) BTFIXUP_CALL(mk_pte)(page,pgprot)
+#define mk_pte_phys(page,pgprot) BTFIXUP_CALL(mk_pte_phys)(page,pgprot)
+#define mk_pte_io(page,pgprot,space) BTFIXUP_CALL(mk_pte_io)(page,pgprot,space)
+
+#define pgprot_noncached(pgprot) BTFIXUP_CALL(pgprot_noncached)(pgprot)
+
+BTFIXUPDEF_INT(pte_modify_mask)
+
+static pte_t pte_modify(pte_t pte, pgprot_t newprot) __attribute_const__;
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	return __pte((pte_val(pte) & BTFIXUP_INT(pte_modify_mask)) |
+		pgprot_val(newprot));
+}
+
+#define pgd_index(address) ((address) >> PGDIR_SHIFT)
+
+/* to find an entry in a page-table-directory */
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* Find an entry in the second-level page table.. */
+BTFIXUPDEF_CALL(pmd_t *, pmd_offset, pgd_t *, unsigned long)
+#define pmd_offset(dir,addr) BTFIXUP_CALL(pmd_offset)(dir,addr)
+
+/* Find an entry in the third-level page table.. */
+BTFIXUPDEF_CALL(pte_t *, pte_offset_kernel, pmd_t *, unsigned long)
+#define pte_offset_kernel(dir,addr) BTFIXUP_CALL(pte_offset_kernel)(dir,addr)
+
+/*
+ * This shortcut works on sun4m (and sun4d) because the nocache area is static,
+ * and sun4c is guaranteed to have no highmem anyway.
+ */
+#define pte_offset_map(d, a)		pte_offset_kernel(d,a)
+#define pte_offset_map_nested(d, a)	pte_offset_kernel(d,a)
+
+#define pte_unmap(pte)		do{}while(0)
+#define pte_unmap_nested(pte)	do{}while(0)
+
+/* Certain architectures need to do special things when pte's
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+
+BTFIXUPDEF_CALL(void, set_pte, pte_t *, pte_t)
+
+#define set_pte(ptep,pteval) BTFIXUP_CALL(set_pte)(ptep,pteval)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+struct seq_file;
+BTFIXUPDEF_CALL(void, mmu_info, struct seq_file *)
+
+#define mmu_info(p) BTFIXUP_CALL(mmu_info)(p)
+
+/* Fault handler stuff... */
+#define FAULT_CODE_PROT     0x1
+#define FAULT_CODE_WRITE    0x2
+#define FAULT_CODE_USER     0x4
+
+BTFIXUPDEF_CALL(void, update_mmu_cache, struct vm_area_struct *, unsigned long, pte_t)
+
+#define update_mmu_cache(vma,addr,pte) BTFIXUP_CALL(update_mmu_cache)(vma,addr,pte)
+
+BTFIXUPDEF_CALL(void, sparc_mapiorange, unsigned int, unsigned long,
+    unsigned long, unsigned int)
+BTFIXUPDEF_CALL(void, sparc_unmapiorange, unsigned long, unsigned int)
+#define sparc_mapiorange(bus,pa,va,len) BTFIXUP_CALL(sparc_mapiorange)(bus,pa,va,len)
+#define sparc_unmapiorange(va,len) BTFIXUP_CALL(sparc_unmapiorange)(va,len)
+
+extern int invalid_segment;
+
+/* Encode and de-code a swap entry */
+BTFIXUPDEF_CALL(unsigned long, __swp_type, swp_entry_t)
+BTFIXUPDEF_CALL(unsigned long, __swp_offset, swp_entry_t)
+BTFIXUPDEF_CALL(swp_entry_t, __swp_entry, unsigned long, unsigned long)
+
+#define __swp_type(__x)			BTFIXUP_CALL(__swp_type)(__x)
+#define __swp_offset(__x)		BTFIXUP_CALL(__swp_offset)(__x)
+#define __swp_entry(__type,__off)	BTFIXUP_CALL(__swp_entry)(__type,__off)
+
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+/* file-offset-in-pte helpers */
+BTFIXUPDEF_CALL(unsigned long, pte_to_pgoff, pte_t pte);
+BTFIXUPDEF_CALL(pte_t, pgoff_to_pte, unsigned long pgoff);
+
+#define pte_to_pgoff(pte) BTFIXUP_CALL(pte_to_pgoff)(pte)
+#define pgoff_to_pte(off) BTFIXUP_CALL(pgoff_to_pte)(off)
+
+/*
+ * This is made a constant because mm/fremap.c required a constant.
+ * Note that layout of these bits is different between sun4c.c and srmmu.c.
+ */
+#define PTE_FILE_MAX_BITS 24
+
+/*
+ */
+struct ctx_list {
+	struct ctx_list *next;
+	struct ctx_list *prev;
+	unsigned int ctx_number;
+	struct mm_struct *ctx_mm;
+};
+
+extern struct ctx_list *ctx_list_pool;  /* Dynamically allocated */
+extern struct ctx_list ctx_free;        /* Head of free list */
+extern struct ctx_list ctx_used;        /* Head of used contexts list */
+
+#define NO_CONTEXT     -1
+
+static inline void remove_from_ctx_list(struct ctx_list *entry)
+{
+	entry->next->prev = entry->prev;
+	entry->prev->next = entry->next;
+}
+
+static inline void add_to_ctx_list(struct ctx_list *head, struct ctx_list *entry)
+{
+	entry->next = head;
+	(entry->prev = head->prev)->next = entry;
+	head->prev = entry;
+}
+#define add_to_free_ctxlist(entry) add_to_ctx_list(&ctx_free, entry)
+#define add_to_used_ctxlist(entry) add_to_ctx_list(&ctx_used, entry)
+
+static inline unsigned long
+__get_phys (unsigned long addr)
+{
+	switch (sparc_cpu_model){
+	case sun4:
+	case sun4c:
+		return sun4c_get_pte (addr) << PAGE_SHIFT;
+	case sun4m:
+	case sun4d:
+		return ((srmmu_get_pte (addr) & 0xffffff00) << 4);
+	default:
+		return 0;
+	}
+}
+
+static inline int
+__get_iospace (unsigned long addr)
+{
+	switch (sparc_cpu_model){
+	case sun4:
+	case sun4c:
+		return -1; /* Don't check iospace on sun4c */
+	case sun4m:
+	case sun4d:
+		return (srmmu_get_pte (addr) >> 28);
+	default:
+		return -1;
+	}
+}
+
+extern unsigned long *sparc_valid_addr_bitmap;
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define kern_addr_valid(addr) \
+	(test_bit(__pa((unsigned long)(addr))>>20, sparc_valid_addr_bitmap))
+
+extern int io_remap_pfn_range(struct vm_area_struct *vma,
+			      unsigned long from, unsigned long pfn,
+			      unsigned long size, pgprot_t prot);
+
+/*
+ * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
+ * its high 4 bits.  These macros/functions put it there or get it from there.
+ */
+#define MK_IOSPACE_PFN(space, pfn)	(pfn | (space << (BITS_PER_LONG - 4)))
+#define GET_IOSPACE(pfn)		(pfn >> (BITS_PER_LONG - 4))
+#define GET_PFN(pfn)			(pfn & 0x0fffffffUL)
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
+({									  \
+	int __changed = !pte_same(*(__ptep), __entry);			  \
+	if (__changed) {						  \
+		set_pte_at((__vma)->vm_mm, (__address), __ptep, __entry); \
+		flush_tlb_page(__vma, __address);			  \
+	}								  \
+	(sparc_cpu_model == sun4c) || __changed;			  \
+})
+
+#include <asm-generic/pgtable.h>
+
+#endif /* !(__ASSEMBLY__) */
+
+#define VMALLOC_START           0xfe600000
+/* XXX Alter this when I get around to fixing sun4c - Anton */
+#define VMALLOC_END             0xffc00000
+
+
+/* We provide our own get_unmapped_area to cope with VA holes for userland */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+#endif /* !(_SPARC_PGTABLE_H) */
diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
new file mode 100644
index 0000000..bb9ec2c
--- /dev/null
+++ b/arch/sparc/include/asm/pgtable_64.h
@@ -0,0 +1,775 @@
+/*
+ * pgtable.h: SpitFire page table operations.
+ *
+ * Copyright 1996,1997 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef _SPARC64_PGTABLE_H
+#define _SPARC64_PGTABLE_H
+
+/* This file contains the functions and defines necessary to modify and use
+ * the SpitFire page tables.
+ */
+
+#include <asm-generic/pgtable-nopud.h>
+
+#include <linux/compiler.h>
+#include <linux/const.h>
+#include <asm/types.h>
+#include <asm/spitfire.h>
+#include <asm/asi.h>
+#include <asm/system.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+
+/* The kernel image occupies 0x4000000 to 0x6000000 (4MB --> 96MB).
+ * The page copy blockops can use 0x6000000 to 0x8000000.
+ * The TSB is mapped in the 0x8000000 to 0xa000000 range.
+ * The PROM resides in an area spanning 0xf0000000 to 0x100000000.
+ * The vmalloc area spans 0x100000000 to 0x200000000.
+ * Since modules need to be in the lowest 32-bits of the address space,
+ * we place them right before the OBP area from 0x10000000 to 0xf0000000.
+ * There is a single static kernel PMD which maps from 0x0 to address
+ * 0x400000000.
+ */
+#define	TLBTEMP_BASE		_AC(0x0000000006000000,UL)
+#define	TSBMAP_BASE		_AC(0x0000000008000000,UL)
+#define MODULES_VADDR		_AC(0x0000000010000000,UL)
+#define MODULES_LEN		_AC(0x00000000e0000000,UL)
+#define MODULES_END		_AC(0x00000000f0000000,UL)
+#define LOW_OBP_ADDRESS		_AC(0x00000000f0000000,UL)
+#define HI_OBP_ADDRESS		_AC(0x0000000100000000,UL)
+#define VMALLOC_START		_AC(0x0000000100000000,UL)
+#define VMALLOC_END		_AC(0x0000000200000000,UL)
+#define VMEMMAP_BASE		_AC(0x0000000200000000,UL)
+
+#define vmemmap			((struct page *)VMEMMAP_BASE)
+
+/* XXX All of this needs to be rethought so we can take advantage
+ * XXX cheetah's full 64-bit virtual address space, ie. no more hole
+ * XXX in the middle like on spitfire. -DaveM
+ */
+/*
+ * Given a virtual address, the lowest PAGE_SHIFT bits determine offset
+ * into the page; the next higher PAGE_SHIFT-3 bits determine the pte#
+ * in the proper pagetable (the -3 is from the 8 byte ptes, and each page
+ * table is a single page long). The next higher PMD_BITS determine pmd#
+ * in the proper pmdtable (where we must have PMD_BITS <= (PAGE_SHIFT-2)
+ * since the pmd entries are 4 bytes, and each pmd page is a single page
+ * long). Finally, the higher few bits determine pgde#.
+ */
+
+/* PMD_SHIFT determines the size of the area a second-level page
+ * table can map
+ */
+#define PMD_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT-3))
+#define PMD_SIZE	(_AC(1,UL) << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+#define PMD_BITS	(PAGE_SHIFT - 2)
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define PGDIR_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT-3) + PMD_BITS)
+#define PGDIR_SIZE	(_AC(1,UL) << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+#define PGDIR_BITS	(PAGE_SHIFT - 2)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/sched.h>
+
+/* Entries per page directory level. */
+#define PTRS_PER_PTE	(1UL << (PAGE_SHIFT-3))
+#define PTRS_PER_PMD	(1UL << PMD_BITS)
+#define PTRS_PER_PGD	(1UL << PGDIR_BITS)
+
+/* Kernel has a separate 44bit address space. */
+#define FIRST_USER_ADDRESS	0
+
+#define pte_ERROR(e)	__builtin_trap()
+#define pmd_ERROR(e)	__builtin_trap()
+#define pgd_ERROR(e)	__builtin_trap()
+
+#endif /* !(__ASSEMBLY__) */
+
+/* PTE bits which are the same in SUN4U and SUN4V format.  */
+#define _PAGE_VALID	  _AC(0x8000000000000000,UL) /* Valid TTE            */
+#define _PAGE_R	  	  _AC(0x8000000000000000,UL) /* Keep ref bit uptodate*/
+
+/* SUN4U pte bits... */
+#define _PAGE_SZ4MB_4U	  _AC(0x6000000000000000,UL) /* 4MB Page             */
+#define _PAGE_SZ512K_4U	  _AC(0x4000000000000000,UL) /* 512K Page            */
+#define _PAGE_SZ64K_4U	  _AC(0x2000000000000000,UL) /* 64K Page             */
+#define _PAGE_SZ8K_4U	  _AC(0x0000000000000000,UL) /* 8K Page              */
+#define _PAGE_NFO_4U	  _AC(0x1000000000000000,UL) /* No Fault Only        */
+#define _PAGE_IE_4U	  _AC(0x0800000000000000,UL) /* Invert Endianness    */
+#define _PAGE_SOFT2_4U	  _AC(0x07FC000000000000,UL) /* Software bits, set 2 */
+#define _PAGE_RES1_4U	  _AC(0x0002000000000000,UL) /* Reserved             */
+#define _PAGE_SZ32MB_4U	  _AC(0x0001000000000000,UL) /* (Panther) 32MB page  */
+#define _PAGE_SZ256MB_4U  _AC(0x2001000000000000,UL) /* (Panther) 256MB page */
+#define _PAGE_SZALL_4U	  _AC(0x6001000000000000,UL) /* All pgsz bits        */
+#define _PAGE_SN_4U	  _AC(0x0000800000000000,UL) /* (Cheetah) Snoop      */
+#define _PAGE_RES2_4U	  _AC(0x0000780000000000,UL) /* Reserved             */
+#define _PAGE_PADDR_4U	  _AC(0x000007FFFFFFE000,UL) /* (Cheetah) pa[42:13]  */
+#define _PAGE_SOFT_4U	  _AC(0x0000000000001F80,UL) /* Software bits:       */
+#define _PAGE_EXEC_4U	  _AC(0x0000000000001000,UL) /* Executable SW bit    */
+#define _PAGE_MODIFIED_4U _AC(0x0000000000000800,UL) /* Modified (dirty)     */
+#define _PAGE_FILE_4U	  _AC(0x0000000000000800,UL) /* Pagecache page       */
+#define _PAGE_ACCESSED_4U _AC(0x0000000000000400,UL) /* Accessed (ref'd)     */
+#define _PAGE_READ_4U	  _AC(0x0000000000000200,UL) /* Readable SW Bit      */
+#define _PAGE_WRITE_4U	  _AC(0x0000000000000100,UL) /* Writable SW Bit      */
+#define _PAGE_PRESENT_4U  _AC(0x0000000000000080,UL) /* Present              */
+#define _PAGE_L_4U	  _AC(0x0000000000000040,UL) /* Locked TTE           */
+#define _PAGE_CP_4U	  _AC(0x0000000000000020,UL) /* Cacheable in P-Cache */
+#define _PAGE_CV_4U	  _AC(0x0000000000000010,UL) /* Cacheable in V-Cache */
+#define _PAGE_E_4U	  _AC(0x0000000000000008,UL) /* side-Effect          */
+#define _PAGE_P_4U	  _AC(0x0000000000000004,UL) /* Privileged Page      */
+#define _PAGE_W_4U	  _AC(0x0000000000000002,UL) /* Writable             */
+
+/* SUN4V pte bits... */
+#define _PAGE_NFO_4V	  _AC(0x4000000000000000,UL) /* No Fault Only        */
+#define _PAGE_SOFT2_4V	  _AC(0x3F00000000000000,UL) /* Software bits, set 2 */
+#define _PAGE_MODIFIED_4V _AC(0x2000000000000000,UL) /* Modified (dirty)     */
+#define _PAGE_ACCESSED_4V _AC(0x1000000000000000,UL) /* Accessed (ref'd)     */
+#define _PAGE_READ_4V	  _AC(0x0800000000000000,UL) /* Readable SW Bit      */
+#define _PAGE_WRITE_4V	  _AC(0x0400000000000000,UL) /* Writable SW Bit      */
+#define _PAGE_PADDR_4V	  _AC(0x00FFFFFFFFFFE000,UL) /* paddr[55:13]         */
+#define _PAGE_IE_4V	  _AC(0x0000000000001000,UL) /* Invert Endianness    */
+#define _PAGE_E_4V	  _AC(0x0000000000000800,UL) /* side-Effect          */
+#define _PAGE_CP_4V	  _AC(0x0000000000000400,UL) /* Cacheable in P-Cache */
+#define _PAGE_CV_4V	  _AC(0x0000000000000200,UL) /* Cacheable in V-Cache */
+#define _PAGE_P_4V	  _AC(0x0000000000000100,UL) /* Privileged Page      */
+#define _PAGE_EXEC_4V	  _AC(0x0000000000000080,UL) /* Executable Page      */
+#define _PAGE_W_4V	  _AC(0x0000000000000040,UL) /* Writable             */
+#define _PAGE_SOFT_4V	  _AC(0x0000000000000030,UL) /* Software bits        */
+#define _PAGE_FILE_4V	  _AC(0x0000000000000020,UL) /* Pagecache page       */
+#define _PAGE_PRESENT_4V  _AC(0x0000000000000010,UL) /* Present              */
+#define _PAGE_RESV_4V	  _AC(0x0000000000000008,UL) /* Reserved             */
+#define _PAGE_SZ16GB_4V	  _AC(0x0000000000000007,UL) /* 16GB Page            */
+#define _PAGE_SZ2GB_4V	  _AC(0x0000000000000006,UL) /* 2GB Page             */
+#define _PAGE_SZ256MB_4V  _AC(0x0000000000000005,UL) /* 256MB Page           */
+#define _PAGE_SZ32MB_4V	  _AC(0x0000000000000004,UL) /* 32MB Page            */
+#define _PAGE_SZ4MB_4V	  _AC(0x0000000000000003,UL) /* 4MB Page             */
+#define _PAGE_SZ512K_4V	  _AC(0x0000000000000002,UL) /* 512K Page            */
+#define _PAGE_SZ64K_4V	  _AC(0x0000000000000001,UL) /* 64K Page             */
+#define _PAGE_SZ8K_4V	  _AC(0x0000000000000000,UL) /* 8K Page              */
+#define _PAGE_SZALL_4V	  _AC(0x0000000000000007,UL) /* All pgsz bits        */
+
+#if PAGE_SHIFT == 13
+#define _PAGE_SZBITS_4U	_PAGE_SZ8K_4U
+#define _PAGE_SZBITS_4V	_PAGE_SZ8K_4V
+#elif PAGE_SHIFT == 16
+#define _PAGE_SZBITS_4U	_PAGE_SZ64K_4U
+#define _PAGE_SZBITS_4V	_PAGE_SZ64K_4V
+#else
+#error Wrong PAGE_SHIFT specified
+#endif
+
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#define _PAGE_SZHUGE_4U	_PAGE_SZ4MB_4U
+#define _PAGE_SZHUGE_4V	_PAGE_SZ4MB_4V
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K)
+#define _PAGE_SZHUGE_4U	_PAGE_SZ512K_4U
+#define _PAGE_SZHUGE_4V	_PAGE_SZ512K_4V
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define _PAGE_SZHUGE_4U	_PAGE_SZ64K_4U
+#define _PAGE_SZHUGE_4V	_PAGE_SZ64K_4V
+#endif
+
+/* These are actually filled in at boot time by sun4{u,v}_pgprot_init() */
+#define __P000	__pgprot(0)
+#define __P001	__pgprot(0)
+#define __P010	__pgprot(0)
+#define __P011	__pgprot(0)
+#define __P100	__pgprot(0)
+#define __P101	__pgprot(0)
+#define __P110	__pgprot(0)
+#define __P111	__pgprot(0)
+
+#define __S000	__pgprot(0)
+#define __S001	__pgprot(0)
+#define __S010	__pgprot(0)
+#define __S011	__pgprot(0)
+#define __S100	__pgprot(0)
+#define __S101	__pgprot(0)
+#define __S110	__pgprot(0)
+#define __S111	__pgprot(0)
+
+#ifndef __ASSEMBLY__
+
+extern pte_t mk_pte_io(unsigned long, pgprot_t, int, unsigned long);
+
+extern unsigned long pte_sz_bits(unsigned long size);
+
+extern pgprot_t PAGE_KERNEL;
+extern pgprot_t PAGE_KERNEL_LOCKED;
+extern pgprot_t PAGE_COPY;
+extern pgprot_t PAGE_SHARED;
+
+/* XXX This uglyness is for the atyfb driver's sparc mmap() support. XXX */
+extern unsigned long _PAGE_IE;
+extern unsigned long _PAGE_E;
+extern unsigned long _PAGE_CACHE;
+
+extern unsigned long pg_iobits;
+extern unsigned long _PAGE_ALL_SZ_BITS;
+extern unsigned long _PAGE_SZBITS;
+
+extern struct page *mem_map_zero;
+#define ZERO_PAGE(vaddr)	(mem_map_zero)
+
+/* PFNs are real physical page numbers.  However, mem_map only begins to record
+ * per-page information starting at pfn_base.  This is to handle systems where
+ * the first physical page in the machine is at some huge physical address,
+ * such as 4GB.   This is common on a partitioned E10000, for example.
+ */
+static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
+{
+	unsigned long paddr = pfn << PAGE_SHIFT;
+	unsigned long sz_bits;
+
+	sz_bits = 0UL;
+	if (_PAGE_SZBITS_4U != 0UL || _PAGE_SZBITS_4V != 0UL) {
+		__asm__ __volatile__(
+		"\n661:	sethi		%%uhi(%1), %0\n"
+		"	sllx		%0, 32, %0\n"
+		"	.section	.sun4v_2insn_patch, \"ax\"\n"
+		"	.word		661b\n"
+		"	mov		%2, %0\n"
+		"	nop\n"
+		"	.previous\n"
+		: "=r" (sz_bits)
+		: "i" (_PAGE_SZBITS_4U), "i" (_PAGE_SZBITS_4V));
+	}
+	return __pte(paddr | sz_bits | pgprot_val(prot));
+}
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+/* This one can be done with two shifts.  */
+static inline unsigned long pte_pfn(pte_t pte)
+{
+	unsigned long ret;
+
+	__asm__ __volatile__(
+	"\n661:	sllx		%1, %2, %0\n"
+	"	srlx		%0, %3, %0\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sllx		%1, %4, %0\n"
+	"	srlx		%0, %5, %0\n"
+	"	.previous\n"
+	: "=r" (ret)
+	: "r" (pte_val(pte)),
+	  "i" (21), "i" (21 + PAGE_SHIFT),
+	  "i" (8), "i" (8 + PAGE_SHIFT));
+
+	return ret;
+}
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t prot)
+{
+	unsigned long mask, tmp;
+
+	/* SUN4U: 0x600307ffffffecb8 (negated == 0x9ffcf80000001347)
+	 * SUN4V: 0x30ffffffffffee17 (negated == 0xcf000000000011e8)
+	 *
+	 * Even if we use negation tricks the result is still a 6
+	 * instruction sequence, so don't try to play fancy and just
+	 * do the most straightforward implementation.
+	 *
+	 * Note: We encode this into 3 sun4v 2-insn patch sequences.
+	 */
+
+	__asm__ __volatile__(
+	"\n661:	sethi		%%uhi(%2), %1\n"
+	"	sethi		%%hi(%2), %0\n"
+	"\n662:	or		%1, %%ulo(%2), %1\n"
+	"	or		%0, %%lo(%2), %0\n"
+	"\n663:	sllx		%1, 32, %1\n"
+	"	or		%0, %1, %0\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%3), %1\n"
+	"	sethi		%%hi(%3), %0\n"
+	"	.word		662b\n"
+	"	or		%1, %%ulo(%3), %1\n"
+	"	or		%0, %%lo(%3), %0\n"
+	"	.word		663b\n"
+	"	sllx		%1, 32, %1\n"
+	"	or		%0, %1, %0\n"
+	"	.previous\n"
+	: "=r" (mask), "=r" (tmp)
+	: "i" (_PAGE_PADDR_4U | _PAGE_MODIFIED_4U | _PAGE_ACCESSED_4U |
+	       _PAGE_CP_4U | _PAGE_CV_4U | _PAGE_E_4U | _PAGE_PRESENT_4U |
+	       _PAGE_SZBITS_4U),
+	  "i" (_PAGE_PADDR_4V | _PAGE_MODIFIED_4V | _PAGE_ACCESSED_4V |
+	       _PAGE_CP_4V | _PAGE_CV_4V | _PAGE_E_4V | _PAGE_PRESENT_4V |
+	       _PAGE_SZBITS_4V));
+
+	return __pte((pte_val(pte) & mask) | (pgprot_val(prot) & ~mask));
+}
+
+static inline pte_t pgoff_to_pte(unsigned long off)
+{
+	off <<= PAGE_SHIFT;
+
+	__asm__ __volatile__(
+	"\n661:	or		%0, %2, %0\n"
+	"	.section	.sun4v_1insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	or		%0, %3, %0\n"
+	"	.previous\n"
+	: "=r" (off)
+	: "0" (off), "i" (_PAGE_FILE_4U), "i" (_PAGE_FILE_4V));
+
+	return __pte(off);
+}
+
+static inline pgprot_t pgprot_noncached(pgprot_t prot)
+{
+	unsigned long val = pgprot_val(prot);
+
+	__asm__ __volatile__(
+	"\n661:	andn		%0, %2, %0\n"
+	"	or		%0, %3, %0\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	andn		%0, %4, %0\n"
+	"	or		%0, %5, %0\n"
+	"	.previous\n"
+	: "=r" (val)
+	: "0" (val), "i" (_PAGE_CP_4U | _PAGE_CV_4U), "i" (_PAGE_E_4U),
+	             "i" (_PAGE_CP_4V | _PAGE_CV_4V), "i" (_PAGE_E_4V));
+
+	return __pgprot(val);
+}
+/* Various pieces of code check for platform support by ifdef testing
+ * on "pgprot_noncached".  That's broken and should be fixed, but for
+ * now...
+ */
+#define pgprot_noncached pgprot_noncached
+
+#ifdef CONFIG_HUGETLB_PAGE
+static inline pte_t pte_mkhuge(pte_t pte)
+{
+	unsigned long mask;
+
+	__asm__ __volatile__(
+	"\n661:	sethi		%%uhi(%1), %0\n"
+	"	sllx		%0, 32, %0\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	mov		%2, %0\n"
+	"	nop\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_SZHUGE_4U), "i" (_PAGE_SZHUGE_4V));
+
+	return __pte(pte_val(pte) | mask);
+}
+#endif
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	unsigned long val = pte_val(pte), tmp;
+
+	__asm__ __volatile__(
+	"\n661:	or		%0, %3, %0\n"
+	"	nop\n"
+	"\n662:	nop\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%4), %1\n"
+	"	sllx		%1, 32, %1\n"
+	"	.word		662b\n"
+	"	or		%1, %%lo(%4), %1\n"
+	"	or		%0, %1, %0\n"
+	"	.previous\n"
+	: "=r" (val), "=r" (tmp)
+	: "0" (val), "i" (_PAGE_MODIFIED_4U | _PAGE_W_4U),
+	  "i" (_PAGE_MODIFIED_4V | _PAGE_W_4V));
+
+	return __pte(val);
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	unsigned long val = pte_val(pte), tmp;
+
+	__asm__ __volatile__(
+	"\n661:	andn		%0, %3, %0\n"
+	"	nop\n"
+	"\n662:	nop\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%4), %1\n"
+	"	sllx		%1, 32, %1\n"
+	"	.word		662b\n"
+	"	or		%1, %%lo(%4), %1\n"
+	"	andn		%0, %1, %0\n"
+	"	.previous\n"
+	: "=r" (val), "=r" (tmp)
+	: "0" (val), "i" (_PAGE_MODIFIED_4U | _PAGE_W_4U),
+	  "i" (_PAGE_MODIFIED_4V | _PAGE_W_4V));
+
+	return __pte(val);
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	unsigned long val = pte_val(pte), mask;
+
+	__asm__ __volatile__(
+	"\n661:	mov		%1, %0\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%2), %0\n"
+	"	sllx		%0, 32, %0\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_WRITE_4U), "i" (_PAGE_WRITE_4V));
+
+	return __pte(val | mask);
+}
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	unsigned long val = pte_val(pte), tmp;
+
+	__asm__ __volatile__(
+	"\n661:	andn		%0, %3, %0\n"
+	"	nop\n"
+	"\n662:	nop\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%4), %1\n"
+	"	sllx		%1, 32, %1\n"
+	"	.word		662b\n"
+	"	or		%1, %%lo(%4), %1\n"
+	"	andn		%0, %1, %0\n"
+	"	.previous\n"
+	: "=r" (val), "=r" (tmp)
+	: "0" (val), "i" (_PAGE_WRITE_4U | _PAGE_W_4U),
+	  "i" (_PAGE_WRITE_4V | _PAGE_W_4V));
+
+	return __pte(val);
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	unsigned long mask;
+
+	__asm__ __volatile__(
+	"\n661:	mov		%1, %0\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%2), %0\n"
+	"	sllx		%0, 32, %0\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_ACCESSED_4U), "i" (_PAGE_ACCESSED_4V));
+
+	mask |= _PAGE_R;
+
+	return __pte(pte_val(pte) & ~mask);
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	unsigned long mask;
+
+	__asm__ __volatile__(
+	"\n661:	mov		%1, %0\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%2), %0\n"
+	"	sllx		%0, 32, %0\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_ACCESSED_4U), "i" (_PAGE_ACCESSED_4V));
+
+	mask |= _PAGE_R;
+
+	return __pte(pte_val(pte) | mask);
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+	return pte;
+}
+
+static inline unsigned long pte_young(pte_t pte)
+{
+	unsigned long mask;
+
+	__asm__ __volatile__(
+	"\n661:	mov		%1, %0\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%2), %0\n"
+	"	sllx		%0, 32, %0\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_ACCESSED_4U), "i" (_PAGE_ACCESSED_4V));
+
+	return (pte_val(pte) & mask);
+}
+
+static inline unsigned long pte_dirty(pte_t pte)
+{
+	unsigned long mask;
+
+	__asm__ __volatile__(
+	"\n661:	mov		%1, %0\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%2), %0\n"
+	"	sllx		%0, 32, %0\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_MODIFIED_4U), "i" (_PAGE_MODIFIED_4V));
+
+	return (pte_val(pte) & mask);
+}
+
+static inline unsigned long pte_write(pte_t pte)
+{
+	unsigned long mask;
+
+	__asm__ __volatile__(
+	"\n661:	mov		%1, %0\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%2), %0\n"
+	"	sllx		%0, 32, %0\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_WRITE_4U), "i" (_PAGE_WRITE_4V));
+
+	return (pte_val(pte) & mask);
+}
+
+static inline unsigned long pte_exec(pte_t pte)
+{
+	unsigned long mask;
+
+	__asm__ __volatile__(
+	"\n661:	sethi		%%hi(%1), %0\n"
+	"	.section	.sun4v_1insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	mov		%2, %0\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_EXEC_4U), "i" (_PAGE_EXEC_4V));
+
+	return (pte_val(pte) & mask);
+}
+
+static inline unsigned long pte_file(pte_t pte)
+{
+	unsigned long val = pte_val(pte);
+
+	__asm__ __volatile__(
+	"\n661:	and		%0, %2, %0\n"
+	"	.section	.sun4v_1insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	and		%0, %3, %0\n"
+	"	.previous\n"
+	: "=r" (val)
+	: "0" (val), "i" (_PAGE_FILE_4U), "i" (_PAGE_FILE_4V));
+
+	return val;
+}
+
+static inline unsigned long pte_present(pte_t pte)
+{
+	unsigned long val = pte_val(pte);
+
+	__asm__ __volatile__(
+	"\n661:	and		%0, %2, %0\n"
+	"	.section	.sun4v_1insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	and		%0, %3, %0\n"
+	"	.previous\n"
+	: "=r" (val)
+	: "0" (val), "i" (_PAGE_PRESENT_4U), "i" (_PAGE_PRESENT_4V));
+
+	return val;
+}
+
+static inline int pte_special(pte_t pte)
+{
+	return 0;
+}
+
+#define pmd_set(pmdp, ptep)	\
+	(pmd_val(*(pmdp)) = (__pa((unsigned long) (ptep)) >> 11UL))
+#define pud_set(pudp, pmdp)	\
+	(pud_val(*(pudp)) = (__pa((unsigned long) (pmdp)) >> 11UL))
+#define __pmd_page(pmd)		\
+	((unsigned long) __va((((unsigned long)pmd_val(pmd))<<11UL)))
+#define pmd_page(pmd) 			virt_to_page((void *)__pmd_page(pmd))
+#define pud_page_vaddr(pud)		\
+	((unsigned long) __va((((unsigned long)pud_val(pud))<<11UL)))
+#define pud_page(pud) 			virt_to_page((void *)pud_page_vaddr(pud))
+#define pmd_none(pmd)			(!pmd_val(pmd))
+#define pmd_bad(pmd)			(0)
+#define pmd_present(pmd)		(pmd_val(pmd) != 0U)
+#define pmd_clear(pmdp)			(pmd_val(*(pmdp)) = 0U)
+#define pud_none(pud)			(!pud_val(pud))
+#define pud_bad(pud)			(0)
+#define pud_present(pud)		(pud_val(pud) != 0U)
+#define pud_clear(pudp)			(pud_val(*(pudp)) = 0U)
+
+/* Same in both SUN4V and SUN4U.  */
+#define pte_none(pte) 			(!pte_val(pte))
+
+/* to find an entry in a page-table-directory. */
+#define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+#define pgd_offset(mm, address)	((mm)->pgd + pgd_index(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* Find an entry in the second-level page table.. */
+#define pmd_offset(pudp, address)	\
+	((pmd_t *) pud_page_vaddr(*(pudp)) + \
+	 (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)))
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(dir, address)	\
+	((pte_t *) __pmd_page(*(dir)) + \
+	 ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)))
+#define pte_offset_kernel		pte_index
+#define pte_offset_map			pte_index
+#define pte_offset_map_nested		pte_index
+#define pte_unmap(pte)			do { } while (0)
+#define pte_unmap_nested(pte)		do { } while (0)
+
+/* Actual page table PTE updates.  */
+extern void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t orig);
+
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte)
+{
+	pte_t orig = *ptep;
+
+	*ptep = pte;
+
+	/* It is more efficient to let flush_tlb_kernel_range()
+	 * handle init_mm tlb flushes.
+	 *
+	 * SUN4V NOTE: _PAGE_VALID is the same value in both the SUN4U
+	 *             and SUN4V pte layout, so this inline test is fine.
+	 */
+	if (likely(mm != &init_mm) && (pte_val(orig) & _PAGE_VALID))
+		tlb_batch_add(mm, addr, ptep, orig);
+}
+
+#define pte_clear(mm,addr,ptep)		\
+	set_pte_at((mm), (addr), (ptep), __pte(0UL))
+
+#ifdef DCACHE_ALIASING_POSSIBLE
+#define __HAVE_ARCH_MOVE_PTE
+#define move_pte(pte, prot, old_addr, new_addr)				\
+({									\
+	pte_t newpte = (pte);						\
+	if (tlb_type != hypervisor && pte_present(pte)) {		\
+		unsigned long this_pfn = pte_pfn(pte);			\
+									\
+		if (pfn_valid(this_pfn) &&				\
+		    (((old_addr) ^ (new_addr)) & (1 << 13)))		\
+			flush_dcache_page_all(current->mm,		\
+					      pfn_to_page(this_pfn));	\
+	}								\
+	newpte;								\
+})
+#endif
+
+extern pgd_t swapper_pg_dir[2048];
+extern pmd_t swapper_low_pmd_dir[2048];
+
+extern void paging_init(void);
+extern unsigned long find_ecache_flush_span(unsigned long size);
+
+/* These do nothing with the way I have things setup. */
+#define mmu_lockarea(vaddr, len)		(vaddr)
+#define mmu_unlockarea(vaddr, len)		do { } while(0)
+
+struct vm_area_struct;
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+
+/* Encode and de-code a swap entry */
+#define __swp_type(entry)	(((entry).val >> PAGE_SHIFT) & 0xffUL)
+#define __swp_offset(entry)	((entry).val >> (PAGE_SHIFT + 8UL))
+#define __swp_entry(type, offset)	\
+	( (swp_entry_t) \
+	  { \
+		(((long)(type) << PAGE_SHIFT) | \
+                 ((long)(offset) << (PAGE_SHIFT + 8UL))) \
+	  } )
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+/* File offset in PTE support. */
+extern unsigned long pte_file(pte_t);
+#define pte_to_pgoff(pte)	(pte_val(pte) >> PAGE_SHIFT)
+extern pte_t pgoff_to_pte(unsigned long);
+#define PTE_FILE_MAX_BITS	(64UL - PAGE_SHIFT - 1UL)
+
+extern unsigned long *sparc64_valid_addr_bitmap;
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define kern_addr_valid(addr)	\
+	(test_bit(__pa((unsigned long)(addr))>>22, sparc64_valid_addr_bitmap))
+
+extern int page_in_phys_avail(unsigned long paddr);
+
+extern int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
+			       unsigned long pfn,
+			       unsigned long size, pgprot_t prot);
+
+/*
+ * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
+ * its high 4 bits.  These macros/functions put it there or get it from there.
+ */
+#define MK_IOSPACE_PFN(space, pfn)	(pfn | (space << (BITS_PER_LONG - 4)))
+#define GET_IOSPACE(pfn)		(pfn >> (BITS_PER_LONG - 4))
+#define GET_PFN(pfn)			(pfn & 0x0fffffffffffffffUL)
+
+#include <asm-generic/pgtable.h>
+
+/* We provide our own get_unmapped_area to cope with VA holes and
+ * SHM area cache aliasing for userland.
+ */
+#define HAVE_ARCH_UNMAPPED_AREA
+#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
+
+/* We provide a special get_unmapped_area for framebuffer mmaps to try and use
+ * the largest alignment possible such that larget PTEs can be used.
+ */
+extern unsigned long get_fb_unmapped_area(struct file *filp, unsigned long,
+					  unsigned long, unsigned long,
+					  unsigned long);
+#define HAVE_ARCH_FB_UNMAPPED_AREA
+
+extern void pgtable_cache_init(void);
+extern void sun4v_register_fault_status(void);
+extern void sun4v_ktsb_register(void);
+extern void __init cheetah_ecache_flush_init(void);
+extern void sun4v_patch_tlb_handlers(void);
+
+extern unsigned long cmdline_memory_size;
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC64_PGTABLE_H) */
diff --git a/arch/sparc/include/asm/pgtsrmmu.h b/arch/sparc/include/asm/pgtsrmmu.h
new file mode 100644
index 0000000..808555f
--- /dev/null
+++ b/arch/sparc/include/asm/pgtsrmmu.h
@@ -0,0 +1,298 @@
+/*
+ * pgtsrmmu.h:  SRMMU page table defines and code.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_PGTSRMMU_H
+#define _SPARC_PGTSRMMU_H
+
+#include <asm/page.h>
+
+#ifdef __ASSEMBLY__
+#include <asm/thread_info.h>	/* TI_UWINMASK for WINDOW_FLUSH */
+#endif
+
+/* Number of contexts is implementation-dependent; 64k is the most we support */
+#define SRMMU_MAX_CONTEXTS	65536
+
+/* PMD_SHIFT determines the size of the area a second-level page table entry can map */
+#define SRMMU_REAL_PMD_SHIFT		18
+#define SRMMU_REAL_PMD_SIZE		(1UL << SRMMU_REAL_PMD_SHIFT)
+#define SRMMU_REAL_PMD_MASK		(~(SRMMU_REAL_PMD_SIZE-1))
+#define SRMMU_REAL_PMD_ALIGN(__addr)	(((__addr)+SRMMU_REAL_PMD_SIZE-1)&SRMMU_REAL_PMD_MASK)
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define SRMMU_PGDIR_SHIFT       24
+#define SRMMU_PGDIR_SIZE        (1UL << SRMMU_PGDIR_SHIFT)
+#define SRMMU_PGDIR_MASK        (~(SRMMU_PGDIR_SIZE-1))
+#define SRMMU_PGDIR_ALIGN(addr) (((addr)+SRMMU_PGDIR_SIZE-1)&SRMMU_PGDIR_MASK)
+
+#define SRMMU_REAL_PTRS_PER_PTE	64
+#define SRMMU_REAL_PTRS_PER_PMD	64
+#define SRMMU_PTRS_PER_PGD	256
+
+#define SRMMU_REAL_PTE_TABLE_SIZE	(SRMMU_REAL_PTRS_PER_PTE*4)
+#define SRMMU_PMD_TABLE_SIZE		(SRMMU_REAL_PTRS_PER_PMD*4)
+#define SRMMU_PGD_TABLE_SIZE		(SRMMU_PTRS_PER_PGD*4)
+
+/*
+ * To support pagetables in highmem, Linux introduces APIs which
+ * return struct page* and generally manipulate page tables when
+ * they are not mapped into kernel space. Our hardware page tables
+ * are smaller than pages. We lump hardware tabes into big, page sized
+ * software tables.
+ *
+ * PMD_SHIFT determines the size of the area a second-level page table entry
+ * can map, and our pmd_t is 16 times larger than normal.  The values which
+ * were once defined here are now generic for 4c and srmmu, so they're
+ * found in pgtable.h.
+ */
+#define SRMMU_PTRS_PER_PMD	4
+
+/* Definition of the values in the ET field of PTD's and PTE's */
+#define SRMMU_ET_MASK         0x3
+#define SRMMU_ET_INVALID      0x0
+#define SRMMU_ET_PTD          0x1
+#define SRMMU_ET_PTE          0x2
+#define SRMMU_ET_REPTE        0x3 /* AIEEE, SuperSparc II reverse endian page! */
+
+/* Physical page extraction from PTP's and PTE's. */
+#define SRMMU_CTX_PMASK    0xfffffff0
+#define SRMMU_PTD_PMASK    0xfffffff0
+#define SRMMU_PTE_PMASK    0xffffff00
+
+/* The pte non-page bits.  Some notes:
+ * 1) cache, dirty, valid, and ref are frobbable
+ *    for both supervisor and user pages.
+ * 2) exec and write will only give the desired effect
+ *    on user pages
+ * 3) use priv and priv_readonly for changing the
+ *    characteristics of supervisor ptes
+ */
+#define SRMMU_CACHE        0x80
+#define SRMMU_DIRTY        0x40
+#define SRMMU_REF          0x20
+#define SRMMU_NOREAD       0x10
+#define SRMMU_EXEC         0x08
+#define SRMMU_WRITE        0x04
+#define SRMMU_VALID        0x02 /* SRMMU_ET_PTE */
+#define SRMMU_PRIV         0x1c
+#define SRMMU_PRIV_RDONLY  0x18
+
+#define SRMMU_FILE         0x40	/* Implemented in software */
+
+#define SRMMU_PTE_FILE_SHIFT     8	/* == 32-PTE_FILE_MAX_BITS */
+
+#define SRMMU_CHG_MASK    (0xffffff00 | SRMMU_REF | SRMMU_DIRTY)
+
+/* SRMMU swap entry encoding
+ *
+ * We use 5 bits for the type and 19 for the offset.  This gives us
+ * 32 swapfiles of 4GB each.  Encoding looks like:
+ *
+ * oooooooooooooooooootttttRRRRRRRR
+ * fedcba9876543210fedcba9876543210
+ *
+ * The bottom 8 bits are reserved for protection and status bits, especially
+ * FILE and PRESENT.
+ */
+#define SRMMU_SWP_TYPE_MASK	0x1f
+#define SRMMU_SWP_TYPE_SHIFT	SRMMU_PTE_FILE_SHIFT
+#define SRMMU_SWP_OFF_MASK	0x7ffff
+#define SRMMU_SWP_OFF_SHIFT	(SRMMU_PTE_FILE_SHIFT + 5)
+
+/* Some day I will implement true fine grained access bits for
+ * user pages because the SRMMU gives us the capabilities to
+ * enforce all the protection levels that vma's can have.
+ * XXX But for now...
+ */
+#define SRMMU_PAGE_NONE    __pgprot(SRMMU_CACHE | \
+				    SRMMU_PRIV | SRMMU_REF)
+#define SRMMU_PAGE_SHARED  __pgprot(SRMMU_VALID | SRMMU_CACHE | \
+				    SRMMU_EXEC | SRMMU_WRITE | SRMMU_REF)
+#define SRMMU_PAGE_COPY    __pgprot(SRMMU_VALID | SRMMU_CACHE | \
+				    SRMMU_EXEC | SRMMU_REF)
+#define SRMMU_PAGE_RDONLY  __pgprot(SRMMU_VALID | SRMMU_CACHE | \
+				    SRMMU_EXEC | SRMMU_REF)
+#define SRMMU_PAGE_KERNEL  __pgprot(SRMMU_VALID | SRMMU_CACHE | SRMMU_PRIV | \
+				    SRMMU_DIRTY | SRMMU_REF)
+
+/* SRMMU Register addresses in ASI 0x4.  These are valid for all
+ * current SRMMU implementations that exist.
+ */
+#define SRMMU_CTRL_REG           0x00000000
+#define SRMMU_CTXTBL_PTR         0x00000100
+#define SRMMU_CTX_REG            0x00000200
+#define SRMMU_FAULT_STATUS       0x00000300
+#define SRMMU_FAULT_ADDR         0x00000400
+
+#define WINDOW_FLUSH(tmp1, tmp2)					\
+	mov	0, tmp1;						\
+98:	ld	[%g6 + TI_UWINMASK], tmp2;				\
+	orcc	%g0, tmp2, %g0;						\
+	add	tmp1, 1, tmp1;						\
+	bne	98b;							\
+	 save	%sp, -64, %sp;						\
+99:	subcc	tmp1, 1, tmp1;						\
+	bne	99b;							\
+	 restore %g0, %g0, %g0;
+
+#ifndef __ASSEMBLY__
+
+/* This makes sense. Honest it does - Anton */
+/* XXX Yes but it's ugly as sin.  FIXME. -KMW */
+extern void *srmmu_nocache_pool;
+#define __nocache_pa(VADDR) (((unsigned long)VADDR) - SRMMU_NOCACHE_VADDR + __pa((unsigned long)srmmu_nocache_pool))
+#define __nocache_va(PADDR) (__va((unsigned long)PADDR) - (unsigned long)srmmu_nocache_pool + SRMMU_NOCACHE_VADDR)
+#define __nocache_fix(VADDR) __va(__nocache_pa(VADDR))
+
+/* Accessing the MMU control register. */
+static inline unsigned int srmmu_get_mmureg(void)
+{
+        unsigned int retval;
+	__asm__ __volatile__("lda [%%g0] %1, %0\n\t" :
+			     "=r" (retval) :
+			     "i" (ASI_M_MMUREGS));
+	return retval;
+}
+
+static inline void srmmu_set_mmureg(unsigned long regval)
+{
+	__asm__ __volatile__("sta %0, [%%g0] %1\n\t" : :
+			     "r" (regval), "i" (ASI_M_MMUREGS) : "memory");
+
+}
+
+static inline void srmmu_set_ctable_ptr(unsigned long paddr)
+{
+	paddr = ((paddr >> 4) & SRMMU_CTX_PMASK);
+	__asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+			     "r" (paddr), "r" (SRMMU_CTXTBL_PTR),
+			     "i" (ASI_M_MMUREGS) :
+			     "memory");
+}
+
+static inline unsigned long srmmu_get_ctable_ptr(void)
+{
+	unsigned int retval;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (retval) :
+			     "r" (SRMMU_CTXTBL_PTR),
+			     "i" (ASI_M_MMUREGS));
+	return (retval & SRMMU_CTX_PMASK) << 4;
+}
+
+static inline void srmmu_set_context(int context)
+{
+	__asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+			     "r" (context), "r" (SRMMU_CTX_REG),
+			     "i" (ASI_M_MMUREGS) : "memory");
+}
+
+static inline int srmmu_get_context(void)
+{
+	register int retval;
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (retval) :
+			     "r" (SRMMU_CTX_REG),
+			     "i" (ASI_M_MMUREGS));
+	return retval;
+}
+
+static inline unsigned int srmmu_get_fstatus(void)
+{
+	unsigned int retval;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (retval) :
+			     "r" (SRMMU_FAULT_STATUS), "i" (ASI_M_MMUREGS));
+	return retval;
+}
+
+static inline unsigned int srmmu_get_faddr(void)
+{
+	unsigned int retval;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (retval) :
+			     "r" (SRMMU_FAULT_ADDR), "i" (ASI_M_MMUREGS));
+	return retval;
+}
+
+/* This is guaranteed on all SRMMU's. */
+static inline void srmmu_flush_whole_tlb(void)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+			     "r" (0x400),        /* Flush entire TLB!! */
+			     "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+/* These flush types are not available on all chips... */
+static inline void srmmu_flush_tlb_ctx(void)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+			     "r" (0x300),        /* Flush TLB ctx.. */
+			     "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+static inline void srmmu_flush_tlb_region(unsigned long addr)
+{
+	addr &= SRMMU_PGDIR_MASK;
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+			     "r" (addr | 0x200), /* Flush TLB region.. */
+			     "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+
+static inline void srmmu_flush_tlb_segment(unsigned long addr)
+{
+	addr &= SRMMU_REAL_PMD_MASK;
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+			     "r" (addr | 0x100), /* Flush TLB segment.. */
+			     "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+static inline void srmmu_flush_tlb_page(unsigned long page)
+{
+	page &= PAGE_MASK;
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+			     "r" (page),        /* Flush TLB page.. */
+			     "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+static inline unsigned long srmmu_hwprobe(unsigned long vaddr)
+{
+	unsigned long retval;
+
+	vaddr &= PAGE_MASK;
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (retval) :
+			     "r" (vaddr | 0x400), "i" (ASI_M_FLUSH_PROBE));
+
+	return retval;
+}
+
+static inline int
+srmmu_get_pte (unsigned long addr)
+{
+	register unsigned long entry;
+        
+	__asm__ __volatile__("\n\tlda [%1] %2,%0\n\t" :
+				"=r" (entry):
+				"r" ((addr & 0xfffff000) | 0x400), "i" (ASI_M_FLUSH_PROBE));
+	return entry;
+}
+
+extern unsigned long (*srmmu_read_physical)(unsigned long paddr);
+extern void (*srmmu_write_physical)(unsigned long paddr, unsigned long word);
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_PGTSRMMU_H) */
diff --git a/arch/sparc/include/asm/pgtsun4.h b/arch/sparc/include/asm/pgtsun4.h
new file mode 100644
index 0000000..5a0d661
--- /dev/null
+++ b/arch/sparc/include/asm/pgtsun4.h
@@ -0,0 +1,171 @@
+/*
+ * pgtsun4.h:  Sun4 specific pgtable.h defines and code.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+#ifndef _SPARC_PGTSUN4C_H
+#define _SPARC_PGTSUN4C_H
+
+#include <asm/contregs.h>
+
+/* PMD_SHIFT determines the size of the area a second-level page table can map */
+#define SUN4C_PMD_SHIFT       23
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define SUN4C_PGDIR_SHIFT       23
+#define SUN4C_PGDIR_SIZE        (1UL << SUN4C_PGDIR_SHIFT)
+#define SUN4C_PGDIR_MASK        (~(SUN4C_PGDIR_SIZE-1))
+#define SUN4C_PGDIR_ALIGN(addr) (((addr)+SUN4C_PGDIR_SIZE-1)&SUN4C_PGDIR_MASK)
+
+/* To represent how the sun4c mmu really lays things out. */
+#define SUN4C_REAL_PGDIR_SHIFT       18
+#define SUN4C_REAL_PGDIR_SIZE        (1UL << SUN4C_REAL_PGDIR_SHIFT)
+#define SUN4C_REAL_PGDIR_MASK        (~(SUN4C_REAL_PGDIR_SIZE-1))
+#define SUN4C_REAL_PGDIR_ALIGN(addr) (((addr)+SUN4C_REAL_PGDIR_SIZE-1)&SUN4C_REAL_PGDIR_MASK)
+
+/* 19 bit PFN on sun4 */
+#define SUN4C_PFN_MASK 0x7ffff
+ 
+/* Don't increase these unless the structures in sun4c.c are fixed */
+#define SUN4C_MAX_SEGMAPS 256
+#define SUN4C_MAX_CONTEXTS 16
+
+/*
+ * To be efficient, and not have to worry about allocating such
+ * a huge pgd, we make the kernel sun4c tables each hold 1024
+ * entries and the pgd similarly just like the i386 tables.
+ */
+#define SUN4C_PTRS_PER_PTE    1024
+#define SUN4C_PTRS_PER_PMD    1
+#define SUN4C_PTRS_PER_PGD    1024
+
+/*
+ * Sparc SUN4C pte fields.
+ */
+#define _SUN4C_PAGE_VALID        0x80000000
+#define _SUN4C_PAGE_SILENT_READ  0x80000000   /* synonym */
+#define _SUN4C_PAGE_DIRTY        0x40000000
+#define _SUN4C_PAGE_SILENT_WRITE 0x40000000   /* synonym */
+#define _SUN4C_PAGE_PRIV         0x20000000   /* privileged page */
+#define _SUN4C_PAGE_NOCACHE      0x10000000   /* non-cacheable page */
+#define _SUN4C_PAGE_PRESENT      0x08000000   /* implemented in software */
+#define _SUN4C_PAGE_IO           0x04000000   /* I/O page */
+#define _SUN4C_PAGE_FILE         0x02000000   /* implemented in software */
+#define _SUN4C_PAGE_READ         0x00800000   /* implemented in software */
+#define _SUN4C_PAGE_WRITE        0x00400000   /* implemented in software */
+#define _SUN4C_PAGE_ACCESSED     0x00200000   /* implemented in software */
+#define _SUN4C_PAGE_MODIFIED     0x00100000   /* implemented in software */
+
+#define _SUN4C_READABLE		(_SUN4C_PAGE_READ|_SUN4C_PAGE_SILENT_READ|\
+				 _SUN4C_PAGE_ACCESSED)
+#define _SUN4C_WRITEABLE	(_SUN4C_PAGE_WRITE|_SUN4C_PAGE_SILENT_WRITE|\
+				 _SUN4C_PAGE_MODIFIED)
+
+#define _SUN4C_PAGE_CHG_MASK	(0xffff|_SUN4C_PAGE_ACCESSED|_SUN4C_PAGE_MODIFIED)
+
+#define SUN4C_PAGE_NONE		__pgprot(_SUN4C_PAGE_PRESENT)
+#define SUN4C_PAGE_SHARED	__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE|\
+					 _SUN4C_PAGE_WRITE)
+#define SUN4C_PAGE_COPY		__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
+#define SUN4C_PAGE_READONLY	__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
+#define SUN4C_PAGE_KERNEL	__pgprot(_SUN4C_READABLE|_SUN4C_WRITEABLE|\
+					 _SUN4C_PAGE_DIRTY|_SUN4C_PAGE_PRIV)
+
+/* SUN4C swap entry encoding
+ *
+ * We use 5 bits for the type and 19 for the offset.  This gives us
+ * 32 swapfiles of 4GB each.  Encoding looks like:
+ *
+ * RRRRRRRRooooooooooooooooooottttt
+ * fedcba9876543210fedcba9876543210
+ *
+ * The top 8 bits are reserved for protection and status bits, especially
+ * FILE and PRESENT.
+ */
+#define SUN4C_SWP_TYPE_MASK	0x1f
+#define SUN4C_SWP_OFF_MASK	0x7ffff
+#define SUN4C_SWP_OFF_SHIFT	5
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long sun4c_get_synchronous_error(void)
+{
+	unsigned long sync_err;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (sync_err) :
+			     "r" (AC_SYNC_ERR), "i" (ASI_CONTROL));
+	return sync_err;
+}
+
+static inline unsigned long sun4c_get_synchronous_address(void)
+{
+	unsigned long sync_addr;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (sync_addr) :
+			     "r" (AC_SYNC_VA), "i" (ASI_CONTROL));
+	return sync_addr;
+}
+
+/* SUN4 pte, segmap, and context manipulation */
+static inline unsigned long sun4c_get_segmap(unsigned long addr)
+{
+  register unsigned long entry;
+
+  __asm__ __volatile__("\n\tlduha [%1] %2, %0\n\t" : 
+		       "=r" (entry) :
+		       "r" (addr), "i" (ASI_SEGMAP));
+  return entry;
+}
+
+static inline void sun4c_put_segmap(unsigned long addr, unsigned long entry)
+{
+  __asm__ __volatile__("\n\tstha %1, [%0] %2; nop; nop; nop;\n\t" : :
+		       "r" (addr), "r" (entry),
+		       "i" (ASI_SEGMAP)
+		       : "memory");
+}
+
+static inline unsigned long sun4c_get_pte(unsigned long addr)
+{
+  register unsigned long entry;
+
+  __asm__ __volatile__("\n\tlda [%1] %2, %0\n\t" : 
+		       "=r" (entry) :
+		       "r" (addr), "i" (ASI_PTE));
+  return entry;
+}
+
+static inline void sun4c_put_pte(unsigned long addr, unsigned long entry)
+{
+  __asm__ __volatile__("\n\tsta %1, [%0] %2; nop; nop; nop;\n\t" : :
+		       "r" (addr), 
+		       "r" ((entry & ~(_SUN4C_PAGE_PRESENT))), "i" (ASI_PTE)
+		       : "memory");
+}
+
+static inline int sun4c_get_context(void)
+{
+  register int ctx;
+
+  __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" :
+		       "=r" (ctx) :
+		       "r" (AC_CONTEXT), "i" (ASI_CONTROL));
+
+  return ctx;
+}
+
+static inline int sun4c_set_context(int ctx)
+{
+  __asm__ __volatile__("\n\tstba %0, [%1] %2; nop; nop; nop;\n\t" : :
+		       "r" (ctx), "r" (AC_CONTEXT), "i" (ASI_CONTROL)
+		       : "memory");
+
+  return ctx;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_PGTSUN4_H) */
diff --git a/arch/sparc/include/asm/pgtsun4c.h b/arch/sparc/include/asm/pgtsun4c.h
new file mode 100644
index 0000000..aeb25e9
--- /dev/null
+++ b/arch/sparc/include/asm/pgtsun4c.h
@@ -0,0 +1,172 @@
+/*
+ * pgtsun4c.h:  Sun4c specific pgtable.h defines and code.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_PGTSUN4C_H
+#define _SPARC_PGTSUN4C_H
+
+#include <asm/contregs.h>
+
+/* PMD_SHIFT determines the size of the area a second-level page table can map */
+#define SUN4C_PMD_SHIFT       22
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define SUN4C_PGDIR_SHIFT       22
+#define SUN4C_PGDIR_SIZE        (1UL << SUN4C_PGDIR_SHIFT)
+#define SUN4C_PGDIR_MASK        (~(SUN4C_PGDIR_SIZE-1))
+#define SUN4C_PGDIR_ALIGN(addr) (((addr)+SUN4C_PGDIR_SIZE-1)&SUN4C_PGDIR_MASK)
+
+/* To represent how the sun4c mmu really lays things out. */
+#define SUN4C_REAL_PGDIR_SHIFT       18
+#define SUN4C_REAL_PGDIR_SIZE        (1UL << SUN4C_REAL_PGDIR_SHIFT)
+#define SUN4C_REAL_PGDIR_MASK        (~(SUN4C_REAL_PGDIR_SIZE-1))
+#define SUN4C_REAL_PGDIR_ALIGN(addr) (((addr)+SUN4C_REAL_PGDIR_SIZE-1)&SUN4C_REAL_PGDIR_MASK)
+
+/* 16 bit PFN on sun4c */
+#define SUN4C_PFN_MASK 0xffff
+
+/* Don't increase these unless the structures in sun4c.c are fixed */
+#define SUN4C_MAX_SEGMAPS 256
+#define SUN4C_MAX_CONTEXTS 16
+
+/*
+ * To be efficient, and not have to worry about allocating such
+ * a huge pgd, we make the kernel sun4c tables each hold 1024
+ * entries and the pgd similarly just like the i386 tables.
+ */
+#define SUN4C_PTRS_PER_PTE    1024
+#define SUN4C_PTRS_PER_PMD    1
+#define SUN4C_PTRS_PER_PGD    1024
+
+/*
+ * Sparc SUN4C pte fields.
+ */
+#define _SUN4C_PAGE_VALID        0x80000000
+#define _SUN4C_PAGE_SILENT_READ  0x80000000   /* synonym */
+#define _SUN4C_PAGE_DIRTY        0x40000000
+#define _SUN4C_PAGE_SILENT_WRITE 0x40000000   /* synonym */
+#define _SUN4C_PAGE_PRIV         0x20000000   /* privileged page */
+#define _SUN4C_PAGE_NOCACHE      0x10000000   /* non-cacheable page */
+#define _SUN4C_PAGE_PRESENT      0x08000000   /* implemented in software */
+#define _SUN4C_PAGE_IO           0x04000000   /* I/O page */
+#define _SUN4C_PAGE_FILE         0x02000000   /* implemented in software */
+#define _SUN4C_PAGE_READ         0x00800000   /* implemented in software */
+#define _SUN4C_PAGE_WRITE        0x00400000   /* implemented in software */
+#define _SUN4C_PAGE_ACCESSED     0x00200000   /* implemented in software */
+#define _SUN4C_PAGE_MODIFIED     0x00100000   /* implemented in software */
+
+#define _SUN4C_READABLE		(_SUN4C_PAGE_READ|_SUN4C_PAGE_SILENT_READ|\
+				 _SUN4C_PAGE_ACCESSED)
+#define _SUN4C_WRITEABLE	(_SUN4C_PAGE_WRITE|_SUN4C_PAGE_SILENT_WRITE|\
+				 _SUN4C_PAGE_MODIFIED)
+
+#define _SUN4C_PAGE_CHG_MASK	(0xffff|_SUN4C_PAGE_ACCESSED|_SUN4C_PAGE_MODIFIED)
+
+#define SUN4C_PAGE_NONE		__pgprot(_SUN4C_PAGE_PRESENT)
+#define SUN4C_PAGE_SHARED	__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE|\
+					 _SUN4C_PAGE_WRITE)
+#define SUN4C_PAGE_COPY		__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
+#define SUN4C_PAGE_READONLY	__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
+#define SUN4C_PAGE_KERNEL	__pgprot(_SUN4C_READABLE|_SUN4C_WRITEABLE|\
+					 _SUN4C_PAGE_DIRTY|_SUN4C_PAGE_PRIV)
+
+/* SUN4C swap entry encoding
+ *
+ * We use 5 bits for the type and 19 for the offset.  This gives us
+ * 32 swapfiles of 4GB each.  Encoding looks like:
+ *
+ * RRRRRRRRooooooooooooooooooottttt
+ * fedcba9876543210fedcba9876543210
+ *
+ * The top 8 bits are reserved for protection and status bits, especially
+ * FILE and PRESENT.
+ */
+#define SUN4C_SWP_TYPE_MASK	0x1f
+#define SUN4C_SWP_OFF_MASK	0x7ffff
+#define SUN4C_SWP_OFF_SHIFT	5
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long sun4c_get_synchronous_error(void)
+{
+	unsigned long sync_err;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (sync_err) :
+			     "r" (AC_SYNC_ERR), "i" (ASI_CONTROL));
+	return sync_err;
+}
+
+static inline unsigned long sun4c_get_synchronous_address(void)
+{
+	unsigned long sync_addr;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (sync_addr) :
+			     "r" (AC_SYNC_VA), "i" (ASI_CONTROL));
+	return sync_addr;
+}
+
+/* SUN4C pte, segmap, and context manipulation */
+static inline unsigned long sun4c_get_segmap(unsigned long addr)
+{
+  register unsigned long entry;
+
+  __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" : 
+		       "=r" (entry) :
+		       "r" (addr), "i" (ASI_SEGMAP));
+
+  return entry;
+}
+
+static inline void sun4c_put_segmap(unsigned long addr, unsigned long entry)
+{
+
+  __asm__ __volatile__("\n\tstba %1, [%0] %2; nop; nop; nop;\n\t" : :
+		       "r" (addr), "r" (entry),
+		       "i" (ASI_SEGMAP)
+		       : "memory");
+}
+
+static inline unsigned long sun4c_get_pte(unsigned long addr)
+{
+  register unsigned long entry;
+
+  __asm__ __volatile__("\n\tlda [%1] %2, %0\n\t" : 
+		       "=r" (entry) :
+		       "r" (addr), "i" (ASI_PTE));
+  return entry;
+}
+
+static inline void sun4c_put_pte(unsigned long addr, unsigned long entry)
+{
+  __asm__ __volatile__("\n\tsta %1, [%0] %2; nop; nop; nop;\n\t" : :
+		       "r" (addr), 
+		       "r" ((entry & ~(_SUN4C_PAGE_PRESENT))), "i" (ASI_PTE)
+		       : "memory");
+}
+
+static inline int sun4c_get_context(void)
+{
+  register int ctx;
+
+  __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" :
+		       "=r" (ctx) :
+		       "r" (AC_CONTEXT), "i" (ASI_CONTROL));
+
+  return ctx;
+}
+
+static inline int sun4c_set_context(int ctx)
+{
+  __asm__ __volatile__("\n\tstba %0, [%1] %2; nop; nop; nop;\n\t" : :
+		       "r" (ctx), "r" (AC_CONTEXT), "i" (ASI_CONTROL)
+		       : "memory");
+
+  return ctx;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_PGTSUN4C_H) */
diff --git a/arch/sparc/include/asm/pil.h b/arch/sparc/include/asm/pil.h
new file mode 100644
index 0000000..71819bb
--- /dev/null
+++ b/arch/sparc/include/asm/pil.h
@@ -0,0 +1,22 @@
+#ifndef _SPARC64_PIL_H
+#define _SPARC64_PIL_H
+
+/* To avoid some locking problems, we hard allocate certain PILs
+ * for SMP cross call messages that must do a etrap/rtrap.
+ *
+ * A local_irq_disable() does not block the cross call delivery, so
+ * when SMP locking is an issue we reschedule the event into a PIL
+ * interrupt which is blocked by local_irq_disable().
+ *
+ * In fact any XCALL which has to etrap/rtrap has a problem because
+ * it is difficult to prevent rtrap from running BH's, and that would
+ * need to be done if the XCALL arrived while %pil==15.
+ */
+#define PIL_SMP_CALL_FUNC	1
+#define PIL_SMP_RECEIVE_SIGNAL	2
+#define PIL_SMP_CAPTURE		3
+#define PIL_SMP_CTX_NEW_VERSION	4
+#define PIL_DEVICE_IRQ		5
+#define PIL_SMP_CALL_FUNC_SNGL	6
+
+#endif /* !(_SPARC64_PIL_H) */
diff --git a/arch/sparc/include/asm/poll.h b/arch/sparc/include/asm/poll.h
new file mode 100644
index 0000000..091d3ad
--- /dev/null
+++ b/arch/sparc/include/asm/poll.h
@@ -0,0 +1,12 @@
+#ifndef __SPARC_POLL_H
+#define __SPARC_POLL_H
+
+#define POLLWRNORM	POLLOUT
+#define POLLWRBAND	256
+#define POLLMSG		512
+#define POLLREMOVE	1024
+#define POLLRDHUP       2048
+
+#include <asm-generic/poll.h>
+
+#endif
diff --git a/arch/sparc/include/asm/posix_types.h b/arch/sparc/include/asm/posix_types.h
new file mode 100644
index 0000000..03a0e09
--- /dev/null
+++ b/arch/sparc/include/asm/posix_types.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_POSIX_TYPES_H
+#define ___ASM_SPARC_POSIX_TYPES_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/posix_types_64.h>
+#else
+#include <asm/posix_types_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/posix_types_32.h b/arch/sparc/include/asm/posix_types_32.h
new file mode 100644
index 0000000..6bb6eb1
--- /dev/null
+++ b/arch/sparc/include/asm/posix_types_32.h
@@ -0,0 +1,118 @@
+#ifndef __ARCH_SPARC_POSIX_TYPES_H
+#define __ARCH_SPARC_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned int           __kernel_size_t;
+typedef int                    __kernel_ssize_t;
+typedef long int               __kernel_ptrdiff_t;
+typedef long                   __kernel_time_t;
+typedef long		       __kernel_suseconds_t;
+typedef long                   __kernel_clock_t;
+typedef int                    __kernel_pid_t;
+typedef unsigned short         __kernel_ipc_pid_t;
+typedef unsigned short         __kernel_uid_t;
+typedef unsigned short         __kernel_gid_t;
+typedef unsigned long          __kernel_ino_t;
+typedef unsigned short         __kernel_mode_t;
+typedef unsigned short         __kernel_umode_t;
+typedef short                  __kernel_nlink_t;
+typedef long                   __kernel_daddr_t;
+typedef long                   __kernel_off_t;
+typedef char *                 __kernel_caddr_t;
+typedef unsigned short	       __kernel_uid16_t;
+typedef unsigned short	       __kernel_gid16_t;
+typedef unsigned int	       __kernel_uid32_t;
+typedef unsigned int	       __kernel_gid32_t;
+typedef unsigned short	       __kernel_old_uid_t;
+typedef unsigned short	       __kernel_old_gid_t;
+typedef unsigned short	       __kernel_old_dev_t;
+typedef int                    __kernel_clockid_t;
+typedef int                    __kernel_timer_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef __FD_SET
+static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static inline void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static inline int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant cases (8 or 32 longs,
+ * for 256 and 1024-bit fd_sets respectively)
+ */
+#undef __FD_ZERO
+static inline void __FD_ZERO(__kernel_fd_set *p)
+{
+	unsigned long *tmp = p->fds_bits;
+	int i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+			case 32:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			  tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			  tmp[16] = 0; tmp[17] = 0; tmp[18] = 0; tmp[19] = 0;
+			  tmp[20] = 0; tmp[21] = 0; tmp[22] = 0; tmp[23] = 0;
+			  tmp[24] = 0; tmp[25] = 0; tmp[26] = 0; tmp[27] = 0;
+			  tmp[28] = 0; tmp[29] = 0; tmp[30] = 0; tmp[31] = 0;
+			  return;
+			case 16:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			  tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			  return;
+			case 8:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  return;
+			case 4:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  return;
+		}
+	}
+	i = __FDSET_LONGS;
+	while (i) {
+		i--;
+		*tmp = 0;
+		tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) */
+
+#endif /* !(__ARCH_SPARC_POSIX_TYPES_H) */
diff --git a/arch/sparc/include/asm/posix_types_64.h b/arch/sparc/include/asm/posix_types_64.h
new file mode 100644
index 0000000..ba8f932
--- /dev/null
+++ b/arch/sparc/include/asm/posix_types_64.h
@@ -0,0 +1,122 @@
+#ifndef __ARCH_SPARC64_POSIX_TYPES_H
+#define __ARCH_SPARC64_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long          __kernel_size_t;
+typedef long                   __kernel_ssize_t;
+typedef long                   __kernel_ptrdiff_t;
+typedef long                   __kernel_time_t;
+typedef long                   __kernel_clock_t;
+typedef int                    __kernel_pid_t;
+typedef int                    __kernel_ipc_pid_t;
+typedef unsigned int           __kernel_uid_t;
+typedef unsigned int           __kernel_gid_t;
+typedef unsigned long          __kernel_ino_t;
+typedef unsigned int           __kernel_mode_t;
+typedef unsigned short         __kernel_umode_t;
+typedef unsigned int           __kernel_nlink_t;
+typedef int                    __kernel_daddr_t;
+typedef long                   __kernel_off_t;
+typedef char *                 __kernel_caddr_t;
+typedef unsigned short	       __kernel_uid16_t;
+typedef unsigned short	       __kernel_gid16_t;
+typedef int                    __kernel_clockid_t;
+typedef int                    __kernel_timer_t;
+
+typedef unsigned short 	       __kernel_old_uid_t;
+typedef unsigned short         __kernel_old_gid_t;
+typedef __kernel_uid_t	       __kernel_uid32_t;
+typedef __kernel_gid_t	       __kernel_gid32_t;
+
+typedef unsigned int	       __kernel_old_dev_t;
+
+/* Note this piece of asymmetry from the v9 ABI.  */
+typedef int		       __kernel_suseconds_t;
+
+#ifdef __GNUC__
+typedef long long              __kernel_loff_t;
+#endif
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef __FD_SET
+static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static inline void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static inline int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant cases (8 or 32 longs,
+ * for 256 and 1024-bit fd_sets respectively)
+ */
+#undef __FD_ZERO
+static inline void __FD_ZERO(__kernel_fd_set *p)
+{
+	unsigned long *tmp = p->fds_bits;
+	int i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+			case 32:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			  tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			  tmp[16] = 0; tmp[17] = 0; tmp[18] = 0; tmp[19] = 0;
+			  tmp[20] = 0; tmp[21] = 0; tmp[22] = 0; tmp[23] = 0;
+			  tmp[24] = 0; tmp[25] = 0; tmp[26] = 0; tmp[27] = 0;
+			  tmp[28] = 0; tmp[29] = 0; tmp[30] = 0; tmp[31] = 0;
+			  return;
+			case 16:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			  tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			  return;
+			case 8:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  return;
+			case 4:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  return;
+		}
+	}
+	i = __FDSET_LONGS;
+	while (i) {
+		i--;
+		*tmp = 0;
+		tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) */
+
+#endif /* !(__ARCH_SPARC64_POSIX_TYPES_H) */
diff --git a/arch/sparc/include/asm/processor.h b/arch/sparc/include/asm/processor.h
new file mode 100644
index 0000000..9da9646
--- /dev/null
+++ b/arch/sparc/include/asm/processor.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PROCESSOR_H
+#define ___ASM_SPARC_PROCESSOR_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/processor_64.h>
+#else
+#include <asm/processor_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/processor_32.h b/arch/sparc/include/asm/processor_32.h
new file mode 100644
index 0000000..2ae67a2
--- /dev/null
+++ b/arch/sparc/include/asm/processor_32.h
@@ -0,0 +1,129 @@
+/* include/asm/processor.h
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __ASM_SPARC_PROCESSOR_H
+#define __ASM_SPARC_PROCESSOR_H
+
+/*
+ * Sparc32 implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; __asm__("sethi %%hi(1f), %0; or %0, %%lo(1f), %0;\n1:" : "=r" (pc)); pc; })
+
+#include <asm/psr.h>
+#include <asm/ptrace.h>
+#include <asm/head.h>
+#include <asm/signal.h>
+#include <asm/btfixup.h>
+#include <asm/page.h>
+
+/*
+ * The sparc has no problems with write protection
+ */
+#define wp_works_ok 1
+#define wp_works_ok__is_a_macro /* for versions in ksyms.c */
+
+/* Whee, this is STACK_TOP + PAGE_SIZE and the lowest kernel address too...
+ * That one page is used to protect kernel from intruders, so that
+ * we can make our access_ok test faster
+ */
+#define TASK_SIZE	PAGE_OFFSET
+#ifdef __KERNEL__
+#define STACK_TOP	(PAGE_OFFSET - PAGE_SIZE)
+#define STACK_TOP_MAX	STACK_TOP
+#endif /* __KERNEL__ */
+
+struct task_struct;
+
+#ifdef __KERNEL__
+struct fpq {
+	unsigned long *insn_addr;
+	unsigned long insn;
+};
+#endif
+
+typedef struct {
+	int seg;
+} mm_segment_t;
+
+/* The Sparc processor specific thread struct. */
+struct thread_struct {
+	struct pt_regs *kregs;
+	unsigned int _pad1;
+
+	/* Special child fork kpsr/kwim values. */
+	unsigned long fork_kpsr __attribute__ ((aligned (8)));
+	unsigned long fork_kwim;
+
+	/* Floating point regs */
+	unsigned long   float_regs[32] __attribute__ ((aligned (8)));
+	unsigned long   fsr;
+	unsigned long   fpqdepth;
+	struct fpq	fpqueue[16];
+	unsigned long flags;
+	mm_segment_t current_ds;
+};
+
+#define SPARC_FLAG_KTHREAD      0x1    /* task is a kernel thread */
+#define SPARC_FLAG_UNALIGNED    0x2    /* is allowed to do unaligned accesses */
+
+#define INIT_THREAD  { \
+	.flags = SPARC_FLAG_KTHREAD, \
+	.current_ds = KERNEL_DS, \
+}
+
+/* Return saved PC of a blocked thread. */
+extern unsigned long thread_saved_pc(struct task_struct *t);
+
+/* Do necessary setup to start up a newly executed thread. */
+static inline void start_thread(struct pt_regs * regs, unsigned long pc,
+				    unsigned long sp)
+{
+	register unsigned long zero asm("g1");
+
+	regs->psr = (regs->psr & (PSR_CWP)) | PSR_S;
+	regs->pc = ((pc & (~3)) - 4);
+	regs->npc = regs->pc + 4;
+	regs->y = 0;
+	zero = 0;
+	__asm__ __volatile__("std\t%%g0, [%0 + %3 + 0x00]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x08]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x10]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x18]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x20]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x28]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x30]\n\t"
+			     "st\t%1, [%0 + %3 + 0x38]\n\t"
+			     "st\t%%g0, [%0 + %3 + 0x3c]"
+			     : /* no outputs */
+			     : "r" (regs),
+			       "r" (sp - sizeof(struct reg_window)),
+			       "r" (zero),
+			       "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))
+			     : "memory");
+}
+
+/* Free all resources held by a thread. */
+#define release_thread(tsk)		do { } while(0)
+extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern unsigned long get_wchan(struct task_struct *);
+
+#define task_pt_regs(tsk) ((tsk)->thread.kregs)
+#define KSTK_EIP(tsk)  ((tsk)->thread.kregs->pc)
+#define KSTK_ESP(tsk)  ((tsk)->thread.kregs->u_regs[UREG_FP])
+
+#ifdef __KERNEL__
+
+extern struct task_struct *last_task_used_math;
+
+#define cpu_relax()	barrier()
+
+#endif
+
+#endif /* __ASM_SPARC_PROCESSOR_H */
diff --git a/arch/sparc/include/asm/processor_64.h b/arch/sparc/include/asm/processor_64.h
new file mode 100644
index 0000000..137a6bd
--- /dev/null
+++ b/arch/sparc/include/asm/processor_64.h
@@ -0,0 +1,237 @@
+/*
+ * include/asm/processor.h
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __ASM_SPARC64_PROCESSOR_H
+#define __ASM_SPARC64_PROCESSOR_H
+
+/*
+ * Sparc64 implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; __asm__("rd %%pc, %0" : "=r" (pc)); pc; })
+
+#include <asm/asi.h>
+#include <asm/pstate.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/* The sparc has no problems with write protection */
+#define wp_works_ok 1
+#define wp_works_ok__is_a_macro /* for versions in ksyms.c */
+
+/*
+ * User lives in his very own context, and cannot reference us. Note
+ * that TASK_SIZE is a misnomer, it really gives maximum user virtual
+ * address that the kernel will allocate out.
+ *
+ * XXX No longer using virtual page tables, kill this upper limit...
+ */
+#define VA_BITS		44
+#ifndef __ASSEMBLY__
+#define VPTE_SIZE	(1UL << (VA_BITS - PAGE_SHIFT + 3))
+#else
+#define VPTE_SIZE	(1 << (VA_BITS - PAGE_SHIFT + 3))
+#endif
+
+#define TASK_SIZE	((unsigned long)-VPTE_SIZE)
+#define TASK_SIZE_OF(tsk) \
+	(test_tsk_thread_flag(tsk,TIF_32BIT) ? \
+	 (1UL << 32UL) : TASK_SIZE)
+#ifdef __KERNEL__
+
+#define STACK_TOP32	((1UL << 32UL) - PAGE_SIZE)
+#define STACK_TOP64	(0x0000080000000000UL - (1UL << 32UL))
+
+#define STACK_TOP	(test_thread_flag(TIF_32BIT) ? \
+			 STACK_TOP32 : STACK_TOP64)
+
+#define STACK_TOP_MAX	STACK_TOP64
+
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned char seg;
+} mm_segment_t;
+
+/* The Sparc processor specific thread struct. */
+/* XXX This should die, everything can go into thread_info now. */
+struct thread_struct {
+#ifdef CONFIG_DEBUG_SPINLOCK
+	/* How many spinlocks held by this thread.
+	 * Used with spin lock debugging to catch tasks
+	 * sleeping illegally with locks held.
+	 */
+	int smp_lock_count;
+	unsigned int smp_lock_pc;
+#else
+	int dummy; /* f'in gcc bug... */
+#endif
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+#ifndef CONFIG_DEBUG_SPINLOCK
+#define INIT_THREAD  {			\
+	0,				\
+}
+#else /* CONFIG_DEBUG_SPINLOCK */
+#define INIT_THREAD  {					\
+/* smp_lock_count, smp_lock_pc, */			\
+   0,		   0,					\
+}
+#endif /* !(CONFIG_DEBUG_SPINLOCK) */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+/* Return saved PC of a blocked thread. */
+struct task_struct;
+extern unsigned long thread_saved_pc(struct task_struct *);
+
+/* On Uniprocessor, even in RMO processes see TSO semantics */
+#ifdef CONFIG_SMP
+#define TSTATE_INITIAL_MM	TSTATE_TSO
+#else
+#define TSTATE_INITIAL_MM	TSTATE_RMO
+#endif
+
+/* Do necessary setup to start up a newly executed thread. */
+#define start_thread(regs, pc, sp) \
+do { \
+	unsigned long __asi = ASI_PNF; \
+	regs->tstate = (regs->tstate & (TSTATE_CWP)) | (TSTATE_INITIAL_MM|TSTATE_IE) | (__asi << 24UL); \
+	regs->tpc = ((pc & (~3)) - 4); \
+	regs->tnpc = regs->tpc + 4; \
+	regs->y = 0; \
+	set_thread_wstate(1 << 3); \
+	if (current_thread_info()->utraps) { \
+		if (*(current_thread_info()->utraps) < 2) \
+			kfree(current_thread_info()->utraps); \
+		else \
+			(*(current_thread_info()->utraps))--; \
+		current_thread_info()->utraps = NULL; \
+	} \
+	__asm__ __volatile__( \
+	"stx		%%g0, [%0 + %2 + 0x00]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x08]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x10]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x18]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x20]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x28]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x30]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x38]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x40]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x48]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x50]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x58]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x60]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x68]\n\t" \
+	"stx		%1,   [%0 + %2 + 0x70]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x78]\n\t" \
+	"wrpr		%%g0, (1 << 3), %%wstate\n\t" \
+	: \
+	: "r" (regs), "r" (sp - sizeof(struct reg_window) - STACK_BIAS), \
+	  "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))); \
+} while (0)
+
+#define start_thread32(regs, pc, sp) \
+do { \
+	unsigned long __asi = ASI_PNF; \
+	pc &= 0x00000000ffffffffUL; \
+	sp &= 0x00000000ffffffffUL; \
+	regs->tstate = (regs->tstate & (TSTATE_CWP))|(TSTATE_INITIAL_MM|TSTATE_IE|TSTATE_AM) | (__asi << 24UL); \
+	regs->tpc = ((pc & (~3)) - 4); \
+	regs->tnpc = regs->tpc + 4; \
+	regs->y = 0; \
+	set_thread_wstate(2 << 3); \
+	if (current_thread_info()->utraps) { \
+		if (*(current_thread_info()->utraps) < 2) \
+			kfree(current_thread_info()->utraps); \
+		else \
+			(*(current_thread_info()->utraps))--; \
+		current_thread_info()->utraps = NULL; \
+	} \
+	__asm__ __volatile__( \
+	"stx		%%g0, [%0 + %2 + 0x00]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x08]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x10]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x18]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x20]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x28]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x30]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x38]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x40]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x48]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x50]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x58]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x60]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x68]\n\t" \
+	"stx		%1,   [%0 + %2 + 0x70]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x78]\n\t" \
+	"wrpr		%%g0, (2 << 3), %%wstate\n\t" \
+	: \
+	: "r" (regs), "r" (sp - sizeof(struct reg_window32)), \
+	  "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))); \
+} while (0)
+
+/* Free all resources held by a thread. */
+#define release_thread(tsk)		do { } while (0)
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+extern unsigned long get_wchan(struct task_struct *task);
+
+#define task_pt_regs(tsk) (task_thread_info(tsk)->kregs)
+#define KSTK_EIP(tsk)  (task_pt_regs(tsk)->tpc)
+#define KSTK_ESP(tsk)  (task_pt_regs(tsk)->u_regs[UREG_FP])
+
+#define cpu_relax()	barrier()
+
+/* Prefetch support.  This is tuned for UltraSPARC-III and later.
+ * UltraSPARC-I will treat these as nops, and UltraSPARC-II has
+ * a shallower prefetch queue than later chips.
+ */
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+#define ARCH_HAS_SPINLOCK_PREFETCH
+
+static inline void prefetch(const void *x)
+{
+	/* We do not use the read prefetch mnemonic because that
+	 * prefetches into the prefetch-cache which only is accessible
+	 * by floating point operations in UltraSPARC-III and later.
+	 * By contrast, "#one_write" prefetches into the L2 cache
+	 * in shared state.
+	 */
+	__asm__ __volatile__("prefetch [%0], #one_write"
+			     : /* no outputs */
+			     : "r" (x));
+}
+
+static inline void prefetchw(const void *x)
+{
+	/* The most optimal prefetch to use for writes is
+	 * "#n_writes".  This brings the cacheline into the
+	 * L2 cache in "owned" state.
+	 */
+	__asm__ __volatile__("prefetch [%0], #n_writes"
+			     : /* no outputs */
+			     : "r" (x));
+}
+
+#define spin_lock_prefetch(x)	prefetchw(x)
+
+#define HAVE_ARCH_PICK_MMAP_LAYOUT
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__ASM_SPARC64_PROCESSOR_H) */
diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h
new file mode 100644
index 0000000..fd55522
--- /dev/null
+++ b/arch/sparc/include/asm/prom.h
@@ -0,0 +1,108 @@
+#ifndef _SPARC_PROM_H
+#define _SPARC_PROM_H
+#ifdef __KERNEL__
+
+/*
+ * Definitions for talking to the Open Firmware PROM on
+ * Power Macintosh computers.
+ *
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
+ * Updates for SPARC by David S. Miller
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <asm/atomic.h>
+
+#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT	2
+#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT	1
+
+#define of_compat_cmp(s1, s2, l)	strncmp((s1), (s2), (l))
+#define of_prop_cmp(s1, s2)		strcasecmp((s1), (s2))
+#define of_node_cmp(s1, s2)		strcmp((s1), (s2))
+
+typedef u32 phandle;
+typedef u32 ihandle;
+
+struct property {
+	char	*name;
+	int	length;
+	void	*value;
+	struct property *next;
+	unsigned long _flags;
+	unsigned int unique_id;
+};
+
+struct of_irq_controller;
+struct device_node {
+	const char	*name;
+	const char	*type;
+	phandle	node;
+	char	*path_component_name;
+	char	*full_name;
+
+	struct	property *properties;
+	struct  property *deadprops; /* removed properties */
+	struct	device_node *parent;
+	struct	device_node *child;
+	struct	device_node *sibling;
+	struct	device_node *next;	/* next device of same type */
+	struct	device_node *allnext;	/* next in list of all nodes */
+	struct  proc_dir_entry *pde;	/* this node's proc directory */
+	struct  kref kref;
+	unsigned long _flags;
+	void	*data;
+	unsigned int unique_id;
+
+	struct of_irq_controller *irq_trans;
+};
+
+struct of_irq_controller {
+	unsigned int	(*irq_build)(struct device_node *, unsigned int, void *);
+	void		*data;
+};
+
+#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags)
+#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags)
+
+extern struct device_node *of_find_node_by_cpuid(int cpuid);
+extern int of_set_property(struct device_node *node, const char *name, void *val, int len);
+extern int of_getintprop_default(struct device_node *np,
+				 const char *name,
+				 int def);
+extern int of_find_in_proplist(const char *list, const char *match, int len);
+#ifdef CONFIG_NUMA
+extern int of_node_to_nid(struct device_node *dp);
+#else
+#define of_node_to_nid(dp)	(-1)
+#endif
+
+extern void prom_build_devicetree(void);
+
+/* Dummy ref counting routines - to be implemented later */
+static inline struct device_node *of_node_get(struct device_node *node)
+{
+	return node;
+}
+static inline void of_node_put(struct device_node *node)
+{
+}
+
+/*
+ * NB:  This is here while we transition from using asm/prom.h
+ * to linux/of.h
+ */
+#include <linux/of.h>
+
+extern struct device_node *of_console_device;
+extern char *of_console_path;
+extern char *of_console_options;
+
+#endif /* __KERNEL__ */
+#endif /* _SPARC_PROM_H */
diff --git a/arch/sparc/include/asm/psr.h b/arch/sparc/include/asm/psr.h
new file mode 100644
index 0000000..b8c0e5f
--- /dev/null
+++ b/arch/sparc/include/asm/psr.h
@@ -0,0 +1,93 @@
+/*
+ * psr.h: This file holds the macros for masking off various parts of
+ *        the processor status register on the Sparc. This is valid
+ *        for Version 8. On the V9 this is renamed to the PSTATE
+ *        register and its members are accessed as fields like
+ *        PSTATE.PRIV for the current CPU privilege level.
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __LINUX_SPARC_PSR_H
+#define __LINUX_SPARC_PSR_H
+
+/* The Sparc PSR fields are laid out as the following:
+ *
+ *  ------------------------------------------------------------------------
+ *  | impl  | vers  | icc   | resv  | EC | EF | PIL  | S | PS | ET |  CWP  |
+ *  | 31-28 | 27-24 | 23-20 | 19-14 | 13 | 12 | 11-8 | 7 | 6  | 5  |  4-0  |
+ *  ------------------------------------------------------------------------
+ */
+#define PSR_CWP     0x0000001f         /* current window pointer     */
+#define PSR_ET      0x00000020         /* enable traps field         */
+#define PSR_PS      0x00000040         /* previous privilege level   */
+#define PSR_S       0x00000080         /* current privilege level    */
+#define PSR_PIL     0x00000f00         /* processor interrupt level  */
+#define PSR_EF      0x00001000         /* enable floating point      */
+#define PSR_EC      0x00002000         /* enable co-processor        */
+#define PSR_SYSCALL 0x00004000         /* inside of a syscall        */
+#define PSR_LE      0x00008000         /* SuperSparcII little-endian */
+#define PSR_ICC     0x00f00000         /* integer condition codes    */
+#define PSR_C       0x00100000         /* carry bit                  */
+#define PSR_V       0x00200000         /* overflow bit               */
+#define PSR_Z       0x00400000         /* zero bit                   */
+#define PSR_N       0x00800000         /* negative bit               */
+#define PSR_VERS    0x0f000000         /* cpu-version field          */
+#define PSR_IMPL    0xf0000000         /* cpu-implementation field   */
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+/* Get the %psr register. */
+static inline unsigned int get_psr(void)
+{
+	unsigned int psr;
+	__asm__ __volatile__(
+		"rd	%%psr, %0\n\t"
+		"nop\n\t"
+		"nop\n\t"
+		"nop\n\t"
+	: "=r" (psr)
+	: /* no inputs */
+	: "memory");
+
+	return psr;
+}
+
+static inline void put_psr(unsigned int new_psr)
+{
+	__asm__ __volatile__(
+		"wr	%0, 0x0, %%psr\n\t"
+		"nop\n\t"
+		"nop\n\t"
+		"nop\n\t"
+	: /* no outputs */
+	: "r" (new_psr)
+	: "memory", "cc");
+}
+
+/* Get the %fsr register.  Be careful, make sure the floating point
+ * enable bit is set in the %psr when you execute this or you will
+ * incur a trap.
+ */
+
+extern unsigned int fsr_storage;
+
+static inline unsigned int get_fsr(void)
+{
+	unsigned int fsr = 0;
+
+	__asm__ __volatile__(
+		"st	%%fsr, %1\n\t"
+		"ld	%1, %0\n\t"
+	: "=r" (fsr)
+	: "m" (fsr_storage));
+
+	return fsr;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* (__KERNEL__) */
+
+#endif /* !(__LINUX_SPARC_PSR_H) */
diff --git a/arch/sparc/include/asm/psrcompat.h b/arch/sparc/include/asm/psrcompat.h
new file mode 100644
index 0000000..44b6327
--- /dev/null
+++ b/arch/sparc/include/asm/psrcompat.h
@@ -0,0 +1,45 @@
+#ifndef _SPARC64_PSRCOMPAT_H
+#define _SPARC64_PSRCOMPAT_H
+
+#include <asm/pstate.h>
+
+/* Old 32-bit PSR fields for the compatibility conversion code. */
+#define PSR_CWP     0x0000001f         /* current window pointer     */
+#define PSR_ET      0x00000020         /* enable traps field         */
+#define PSR_PS      0x00000040         /* previous privilege level   */
+#define PSR_S       0x00000080         /* current privilege level    */
+#define PSR_PIL     0x00000f00         /* processor interrupt level  */
+#define PSR_EF      0x00001000         /* enable floating point      */
+#define PSR_EC      0x00002000         /* enable co-processor        */
+#define PSR_SYSCALL 0x00004000         /* inside of a syscall        */
+#define PSR_LE      0x00008000         /* SuperSparcII little-endian */
+#define PSR_ICC     0x00f00000         /* integer condition codes    */
+#define PSR_C       0x00100000         /* carry bit                  */
+#define PSR_V       0x00200000         /* overflow bit               */
+#define PSR_Z       0x00400000         /* zero bit                   */
+#define PSR_N       0x00800000         /* negative bit               */
+#define PSR_VERS    0x0f000000         /* cpu-version field          */
+#define PSR_IMPL    0xf0000000         /* cpu-implementation field   */
+
+#define PSR_V8PLUS  0xff000000         /* fake impl/ver, meaning a 64bit CPU is present */
+#define PSR_XCC	    0x000f0000         /* if PSR_V8PLUS, this is %xcc */
+
+static inline unsigned int tstate_to_psr(unsigned long tstate)
+{
+	return ((tstate & TSTATE_CWP)			|
+		PSR_S					|
+		((tstate & TSTATE_ICC) >> 12)		|
+		((tstate & TSTATE_XCC) >> 20)		|
+		((tstate & TSTATE_SYSCALL) ? PSR_SYSCALL : 0) |
+		PSR_V8PLUS);
+}
+
+static inline unsigned long psr_to_tstate_icc(unsigned int psr)
+{
+	unsigned long tstate = ((unsigned long)(psr & PSR_ICC)) << 12;
+	if ((psr & (PSR_VERS|PSR_IMPL)) == PSR_V8PLUS)
+		tstate |= ((unsigned long)(psr & PSR_XCC)) << 20;
+	return tstate;
+}
+
+#endif /* !(_SPARC64_PSRCOMPAT_H) */
diff --git a/arch/sparc/include/asm/pstate.h b/arch/sparc/include/asm/pstate.h
new file mode 100644
index 0000000..a26a537
--- /dev/null
+++ b/arch/sparc/include/asm/pstate.h
@@ -0,0 +1,91 @@
+#ifndef _SPARC64_PSTATE_H
+#define _SPARC64_PSTATE_H
+
+#include <linux/const.h>
+
+/* The V9 PSTATE Register (with SpitFire extensions).
+ *
+ * -----------------------------------------------------------------------
+ * | Resv | IG | MG | CLE | TLE |  MM  | RED | PEF | AM | PRIV | IE | AG |
+ * -----------------------------------------------------------------------
+ *  63  12  11   10    9     8    7   6   5     4     3     2     1    0
+ */
+#define PSTATE_IG   _AC(0x0000000000000800,UL) /* Interrupt Globals.	*/
+#define PSTATE_MG   _AC(0x0000000000000400,UL) /* MMU Globals.		*/
+#define PSTATE_CLE  _AC(0x0000000000000200,UL) /* Current Little Endian.*/
+#define PSTATE_TLE  _AC(0x0000000000000100,UL) /* Trap Little Endian.	*/
+#define PSTATE_MM   _AC(0x00000000000000c0,UL) /* Memory Model.		*/
+#define PSTATE_TSO  _AC(0x0000000000000000,UL) /* MM: TotalStoreOrder	*/
+#define PSTATE_PSO  _AC(0x0000000000000040,UL) /* MM: PartialStoreOrder	*/
+#define PSTATE_RMO  _AC(0x0000000000000080,UL) /* MM: RelaxedMemoryOrder*/
+#define PSTATE_RED  _AC(0x0000000000000020,UL) /* Reset Error Debug.	*/
+#define PSTATE_PEF  _AC(0x0000000000000010,UL) /* Floating Point Enable.*/
+#define PSTATE_AM   _AC(0x0000000000000008,UL) /* Address Mask.		*/
+#define PSTATE_PRIV _AC(0x0000000000000004,UL) /* Privilege.		*/
+#define PSTATE_IE   _AC(0x0000000000000002,UL) /* Interrupt Enable.	*/
+#define PSTATE_AG   _AC(0x0000000000000001,UL) /* Alternate Globals.	*/
+
+/* The V9 TSTATE Register (with SpitFire and Linux extensions).
+ *
+ * ---------------------------------------------------------------------
+ * |  Resv |  GL  |  CCR  |  ASI  |  %pil  |  PSTATE  |  Resv  |  CWP  |
+ * ---------------------------------------------------------------------
+ *  63   43 42  40 39   32 31   24 23    20 19       8 7      5 4     0
+ */
+#define TSTATE_GL	_AC(0x0000070000000000,UL) /* Global reg level  */
+#define TSTATE_CCR	_AC(0x000000ff00000000,UL) /* Condition Codes.	*/
+#define TSTATE_XCC	_AC(0x000000f000000000,UL) /* Condition Codes.	*/
+#define TSTATE_XNEG	_AC(0x0000008000000000,UL) /* %xcc Negative.	*/
+#define TSTATE_XZERO	_AC(0x0000004000000000,UL) /* %xcc Zero.	*/
+#define TSTATE_XOVFL	_AC(0x0000002000000000,UL) /* %xcc Overflow.	*/
+#define TSTATE_XCARRY	_AC(0x0000001000000000,UL) /* %xcc Carry.	*/
+#define TSTATE_ICC	_AC(0x0000000f00000000,UL) /* Condition Codes.	*/
+#define TSTATE_INEG	_AC(0x0000000800000000,UL) /* %icc Negative.	*/
+#define TSTATE_IZERO	_AC(0x0000000400000000,UL) /* %icc Zero.	*/
+#define TSTATE_IOVFL	_AC(0x0000000200000000,UL) /* %icc Overflow.	*/
+#define TSTATE_ICARRY	_AC(0x0000000100000000,UL) /* %icc Carry.	*/
+#define TSTATE_ASI	_AC(0x00000000ff000000,UL) /* AddrSpace ID.	*/
+#define TSTATE_PIL	_AC(0x0000000000f00000,UL) /* %pil (Linux traps)*/
+#define TSTATE_PSTATE	_AC(0x00000000000fff00,UL) /* PSTATE.		*/
+#define TSTATE_IG	_AC(0x0000000000080000,UL) /* Interrupt Globals.*/
+#define TSTATE_MG	_AC(0x0000000000040000,UL) /* MMU Globals.	*/
+#define TSTATE_CLE	_AC(0x0000000000020000,UL) /* CurrLittleEndian.	*/
+#define TSTATE_TLE	_AC(0x0000000000010000,UL) /* TrapLittleEndian.	*/
+#define TSTATE_MM	_AC(0x000000000000c000,UL) /* Memory Model.	*/
+#define TSTATE_TSO	_AC(0x0000000000000000,UL) /* MM: TSO		*/
+#define TSTATE_PSO	_AC(0x0000000000004000,UL) /* MM: PSO		*/
+#define TSTATE_RMO	_AC(0x0000000000008000,UL) /* MM: RMO		*/
+#define TSTATE_RED	_AC(0x0000000000002000,UL) /* Reset Error Debug.*/
+#define TSTATE_PEF	_AC(0x0000000000001000,UL) /* FPU Enable.	*/
+#define TSTATE_AM	_AC(0x0000000000000800,UL) /* Address Mask.	*/
+#define TSTATE_PRIV	_AC(0x0000000000000400,UL) /* Privilege.	*/
+#define TSTATE_IE	_AC(0x0000000000000200,UL) /* Interrupt Enable.	*/
+#define TSTATE_AG	_AC(0x0000000000000100,UL) /* Alternate Globals.*/
+#define TSTATE_SYSCALL	_AC(0x0000000000000020,UL) /* in syscall trap   */
+#define TSTATE_CWP	_AC(0x000000000000001f,UL) /* Curr Win-Pointer.	*/
+
+/* Floating-Point Registers State Register.
+ *
+ * --------------------------------
+ * |  Resv  |  FEF  |  DU  |  DL  |
+ * --------------------------------
+ *  63     3    2       1      0
+ */
+#define FPRS_FEF	_AC(0x0000000000000004,UL) /* FPU Enable.	*/
+#define FPRS_DU		_AC(0x0000000000000002,UL) /* Dirty Upper.	*/
+#define FPRS_DL		_AC(0x0000000000000001,UL) /* Dirty Lower.	*/
+
+/* Version Register.
+ *
+ * ------------------------------------------------------
+ * | MANUF | IMPL | MASK | Resv | MAXTL | Resv | MAXWIN |
+ * ------------------------------------------------------
+ *  63   48 47  32 31  24 23  16 15    8 7    5 4      0
+ */
+#define VERS_MANUF	_AC(0xffff000000000000,UL) /* Manufacturer.	*/
+#define VERS_IMPL	_AC(0x0000ffff00000000,UL) /* Implementation.	*/
+#define VERS_MASK	_AC(0x00000000ff000000,UL) /* Mask Set Revision.*/
+#define VERS_MAXTL	_AC(0x000000000000ff00,UL) /* Max Trap Level.	*/
+#define VERS_MAXWIN	_AC(0x000000000000001f,UL) /* Max RegWindow Idx.*/
+
+#endif /* !(_SPARC64_PSTATE_H) */
diff --git a/arch/sparc/include/asm/ptrace.h b/arch/sparc/include/asm/ptrace.h
new file mode 100644
index 0000000..6dcbe2e
--- /dev/null
+++ b/arch/sparc/include/asm/ptrace.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PTRACE_H
+#define ___ASM_SPARC_PTRACE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/ptrace_64.h>
+#else
+#include <asm/ptrace_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/ptrace_32.h b/arch/sparc/include/asm/ptrace_32.h
new file mode 100644
index 0000000..d43c88b
--- /dev/null
+++ b/arch/sparc/include/asm/ptrace_32.h
@@ -0,0 +1,176 @@
+#ifndef _SPARC_PTRACE_H
+#define _SPARC_PTRACE_H
+
+#include <asm/psr.h>
+
+/* This struct defines the way the registers are stored on the
+ * stack during a system call and basically all traps.
+ */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+struct pt_regs {
+	unsigned long psr;
+	unsigned long pc;
+	unsigned long npc;
+	unsigned long y;
+	unsigned long u_regs[16]; /* globals and ins */
+};
+
+#define UREG_G0        0
+#define UREG_G1        1
+#define UREG_G2        2
+#define UREG_G3        3
+#define UREG_G4        4
+#define UREG_G5        5
+#define UREG_G6        6
+#define UREG_G7        7
+#define UREG_I0        8
+#define UREG_I1        9
+#define UREG_I2        10
+#define UREG_I3        11
+#define UREG_I4        12
+#define UREG_I5        13
+#define UREG_I6        14
+#define UREG_I7        15
+#define UREG_WIM       UREG_G0
+#define UREG_FADDR     UREG_G0
+#define UREG_FP        UREG_I6
+#define UREG_RETPC     UREG_I7
+
+static inline bool pt_regs_is_syscall(struct pt_regs *regs)
+{
+	return (regs->psr & PSR_SYSCALL);
+}
+
+static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
+{
+	return (regs->psr &= ~PSR_SYSCALL);
+}
+
+/* A register window */
+struct reg_window {
+	unsigned long locals[8];
+	unsigned long ins[8];
+};
+
+/* A Sparc stack frame */
+struct sparc_stackf {
+	unsigned long locals[8];
+        unsigned long ins[6];
+	struct sparc_stackf *fp;
+	unsigned long callers_pc;
+	char *structptr;
+	unsigned long xargs[6];
+	unsigned long xxargs[1];
+};
+
+#define TRACEREG_SZ   sizeof(struct pt_regs)
+#define STACKFRAME_SZ sizeof(struct sparc_stackf)
+
+#ifdef __KERNEL__
+
+#define user_mode(regs) (!((regs)->psr & PSR_PS))
+#define instruction_pointer(regs) ((regs)->pc)
+#define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP])
+unsigned long profile_pc(struct pt_regs *);
+extern void show_regs(struct pt_regs *);
+#endif
+
+#else /* __ASSEMBLY__ */
+/* For assembly code. */
+#define TRACEREG_SZ       0x50
+#define STACKFRAME_SZ     0x60
+#endif
+
+/*
+ * The asm-offsets.h is a generated file, so we cannot include it.
+ * It may be OK for glibc headers, but it's utterly pointless for C code.
+ * The assembly code using those offsets has to include it explicitly.
+ */
+/* #include <asm/asm-offsets.h> */
+
+/* These are for pt_regs. */
+#define PT_PSR    0x0
+#define PT_PC     0x4
+#define PT_NPC    0x8
+#define PT_Y      0xc
+#define PT_G0     0x10
+#define PT_WIM    PT_G0
+#define PT_G1     0x14
+#define PT_G2     0x18
+#define PT_G3     0x1c
+#define PT_G4     0x20
+#define PT_G5     0x24
+#define PT_G6     0x28
+#define PT_G7     0x2c
+#define PT_I0     0x30
+#define PT_I1     0x34
+#define PT_I2     0x38
+#define PT_I3     0x3c
+#define PT_I4     0x40
+#define PT_I5     0x44
+#define PT_I6     0x48
+#define PT_FP     PT_I6
+#define PT_I7     0x4c
+
+/* Reg_window offsets */
+#define RW_L0     0x00
+#define RW_L1     0x04
+#define RW_L2     0x08
+#define RW_L3     0x0c
+#define RW_L4     0x10
+#define RW_L5     0x14
+#define RW_L6     0x18
+#define RW_L7     0x1c
+#define RW_I0     0x20
+#define RW_I1     0x24
+#define RW_I2     0x28
+#define RW_I3     0x2c
+#define RW_I4     0x30
+#define RW_I5     0x34
+#define RW_I6     0x38
+#define RW_I7     0x3c
+
+/* Stack_frame offsets */
+#define SF_L0     0x00
+#define SF_L1     0x04
+#define SF_L2     0x08
+#define SF_L3     0x0c
+#define SF_L4     0x10
+#define SF_L5     0x14
+#define SF_L6     0x18
+#define SF_L7     0x1c
+#define SF_I0     0x20
+#define SF_I1     0x24
+#define SF_I2     0x28
+#define SF_I3     0x2c
+#define SF_I4     0x30
+#define SF_I5     0x34
+#define SF_FP     0x38
+#define SF_PC     0x3c
+#define SF_RETP   0x40
+#define SF_XARG0  0x44
+#define SF_XARG1  0x48
+#define SF_XARG2  0x4c
+#define SF_XARG3  0x50
+#define SF_XARG4  0x54
+#define SF_XARG5  0x58
+#define SF_XXARG  0x5c
+
+/* Stuff for the ptrace system call */
+#define PTRACE_SPARC_DETACH       11
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+#define PTRACE_READDATA           16
+#define PTRACE_WRITEDATA          17
+#define PTRACE_READTEXT           18
+#define PTRACE_WRITETEXT          19
+#define PTRACE_GETFPAREGS         20
+#define PTRACE_SETFPAREGS         21
+
+#endif /* !(_SPARC_PTRACE_H) */
diff --git a/arch/sparc/include/asm/ptrace_64.h b/arch/sparc/include/asm/ptrace_64.h
new file mode 100644
index 0000000..ec6d45c
--- /dev/null
+++ b/arch/sparc/include/asm/ptrace_64.h
@@ -0,0 +1,347 @@
+#ifndef _SPARC64_PTRACE_H
+#define _SPARC64_PTRACE_H
+
+#include <asm/pstate.h>
+
+/* This struct defines the way the registers are stored on the
+ * stack during a system call and basically all traps.
+ */
+
+/* This magic value must have the low 9 bits clear,
+ * as that is where we encode the %tt value, see below.
+ */
+#define PT_REGS_MAGIC 0x57ac6c00
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+struct pt_regs {
+	unsigned long u_regs[16]; /* globals and ins */
+	unsigned long tstate;
+	unsigned long tpc;
+	unsigned long tnpc;
+	unsigned int y;
+
+	/* We encode a magic number, PT_REGS_MAGIC, along
+	 * with the %tt (trap type) register value at trap
+	 * entry time.  The magic number allows us to identify
+	 * accurately a trap stack frame in the stack
+	 * unwinder, and the %tt value allows us to test
+	 * things like "in a system call" etc. for an arbitray
+	 * process.
+	 *
+	 * The PT_REGS_MAGIC is choosen such that it can be
+	 * loaded completely using just a sethi instruction.
+	 */
+	unsigned int magic;
+};
+
+static inline int pt_regs_trap_type(struct pt_regs *regs)
+{
+	return regs->magic & 0x1ff;
+}
+
+static inline bool pt_regs_is_syscall(struct pt_regs *regs)
+{
+	return (regs->tstate & TSTATE_SYSCALL);
+}
+
+static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
+{
+	return (regs->tstate &= ~TSTATE_SYSCALL);
+}
+
+struct pt_regs32 {
+	unsigned int psr;
+	unsigned int pc;
+	unsigned int npc;
+	unsigned int y;
+	unsigned int u_regs[16]; /* globals and ins */
+};
+
+#define UREG_G0        0
+#define UREG_G1        1
+#define UREG_G2        2
+#define UREG_G3        3
+#define UREG_G4        4
+#define UREG_G5        5
+#define UREG_G6        6
+#define UREG_G7        7
+#define UREG_I0        8
+#define UREG_I1        9
+#define UREG_I2        10
+#define UREG_I3        11
+#define UREG_I4        12
+#define UREG_I5        13
+#define UREG_I6        14
+#define UREG_I7        15
+#define UREG_FP        UREG_I6
+#define UREG_RETPC     UREG_I7
+
+/* A V9 register window */
+struct reg_window {
+	unsigned long locals[8];
+	unsigned long ins[8];
+};
+
+/* A 32-bit register window. */
+struct reg_window32 {
+	unsigned int locals[8];
+	unsigned int ins[8];
+};
+
+/* A V9 Sparc stack frame */
+struct sparc_stackf {
+	unsigned long locals[8];
+        unsigned long ins[6];
+	struct sparc_stackf *fp;
+	unsigned long callers_pc;
+	char *structptr;
+	unsigned long xargs[6];
+	unsigned long xxargs[1];
+};
+
+/* A 32-bit Sparc stack frame */
+struct sparc_stackf32 {
+	unsigned int locals[8];
+        unsigned int ins[6];
+	unsigned int fp;
+	unsigned int callers_pc;
+	unsigned int structptr;
+	unsigned int xargs[6];
+	unsigned int xxargs[1];
+};
+
+struct sparc_trapf {
+	unsigned long locals[8];
+	unsigned long ins[8];
+	unsigned long _unused;
+	struct pt_regs *regs;
+};
+
+#define TRACEREG_SZ	sizeof(struct pt_regs)
+#define STACKFRAME_SZ	sizeof(struct sparc_stackf)
+
+#define TRACEREG32_SZ	sizeof(struct pt_regs32)
+#define STACKFRAME32_SZ	sizeof(struct sparc_stackf32)
+
+#ifdef __KERNEL__
+
+struct global_reg_snapshot {
+	unsigned long		tstate;
+	unsigned long		tpc;
+	unsigned long		tnpc;
+	unsigned long		o7;
+	unsigned long		i7;
+	struct thread_info	*thread;
+	unsigned long		pad1;
+	unsigned long		pad2;
+};
+
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+
+#define force_successful_syscall_return()	    \
+do {	current_thread_info()->syscall_noerror = 1; \
+} while (0)
+#define user_mode(regs) (!((regs)->tstate & TSTATE_PRIV))
+#define instruction_pointer(regs) ((regs)->tpc)
+#define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP])
+#define regs_return_value(regs) ((regs)->u_regs[UREG_I0])
+#ifdef CONFIG_SMP
+extern unsigned long profile_pc(struct pt_regs *);
+#else
+#define profile_pc(regs) instruction_pointer(regs)
+#endif
+extern void show_regs(struct pt_regs *);
+extern void __show_regs(struct pt_regs *);
+#endif
+
+#else /* __ASSEMBLY__ */
+/* For assembly code. */
+#define TRACEREG_SZ		0xa0
+#define STACKFRAME_SZ		0xc0
+
+#define TRACEREG32_SZ		0x50
+#define STACKFRAME32_SZ		0x60
+#endif
+
+#ifdef __KERNEL__
+#define STACK_BIAS		2047
+#endif
+
+/* These are for pt_regs. */
+#define PT_V9_G0     0x00
+#define PT_V9_G1     0x08
+#define PT_V9_G2     0x10
+#define PT_V9_G3     0x18
+#define PT_V9_G4     0x20
+#define PT_V9_G5     0x28
+#define PT_V9_G6     0x30
+#define PT_V9_G7     0x38
+#define PT_V9_I0     0x40
+#define PT_V9_I1     0x48
+#define PT_V9_I2     0x50
+#define PT_V9_I3     0x58
+#define PT_V9_I4     0x60
+#define PT_V9_I5     0x68
+#define PT_V9_I6     0x70
+#define PT_V9_FP     PT_V9_I6
+#define PT_V9_I7     0x78
+#define PT_V9_TSTATE 0x80
+#define PT_V9_TPC    0x88
+#define PT_V9_TNPC   0x90
+#define PT_V9_Y      0x98
+#define PT_V9_MAGIC  0x9c
+#define PT_TSTATE	PT_V9_TSTATE
+#define PT_TPC		PT_V9_TPC
+#define PT_TNPC		PT_V9_TNPC
+
+/* These for pt_regs32. */
+#define PT_PSR    0x0
+#define PT_PC     0x4
+#define PT_NPC    0x8
+#define PT_Y      0xc
+#define PT_G0     0x10
+#define PT_WIM    PT_G0
+#define PT_G1     0x14
+#define PT_G2     0x18
+#define PT_G3     0x1c
+#define PT_G4     0x20
+#define PT_G5     0x24
+#define PT_G6     0x28
+#define PT_G7     0x2c
+#define PT_I0     0x30
+#define PT_I1     0x34
+#define PT_I2     0x38
+#define PT_I3     0x3c
+#define PT_I4     0x40
+#define PT_I5     0x44
+#define PT_I6     0x48
+#define PT_FP     PT_I6
+#define PT_I7     0x4c
+
+/* Reg_window offsets */
+#define RW_V9_L0     0x00
+#define RW_V9_L1     0x08
+#define RW_V9_L2     0x10
+#define RW_V9_L3     0x18
+#define RW_V9_L4     0x20
+#define RW_V9_L5     0x28
+#define RW_V9_L6     0x30
+#define RW_V9_L7     0x38
+#define RW_V9_I0     0x40
+#define RW_V9_I1     0x48
+#define RW_V9_I2     0x50
+#define RW_V9_I3     0x58
+#define RW_V9_I4     0x60
+#define RW_V9_I5     0x68
+#define RW_V9_I6     0x70
+#define RW_V9_I7     0x78
+
+#define RW_L0     0x00
+#define RW_L1     0x04
+#define RW_L2     0x08
+#define RW_L3     0x0c
+#define RW_L4     0x10
+#define RW_L5     0x14
+#define RW_L6     0x18
+#define RW_L7     0x1c
+#define RW_I0     0x20
+#define RW_I1     0x24
+#define RW_I2     0x28
+#define RW_I3     0x2c
+#define RW_I4     0x30
+#define RW_I5     0x34
+#define RW_I6     0x38
+#define RW_I7     0x3c
+
+/* Stack_frame offsets */
+#define SF_V9_L0     0x00
+#define SF_V9_L1     0x08
+#define SF_V9_L2     0x10
+#define SF_V9_L3     0x18
+#define SF_V9_L4     0x20
+#define SF_V9_L5     0x28
+#define SF_V9_L6     0x30
+#define SF_V9_L7     0x38
+#define SF_V9_I0     0x40
+#define SF_V9_I1     0x48
+#define SF_V9_I2     0x50
+#define SF_V9_I3     0x58
+#define SF_V9_I4     0x60
+#define SF_V9_I5     0x68
+#define SF_V9_FP     0x70
+#define SF_V9_PC     0x78
+#define SF_V9_RETP   0x80
+#define SF_V9_XARG0  0x88
+#define SF_V9_XARG1  0x90
+#define SF_V9_XARG2  0x98
+#define SF_V9_XARG3  0xa0
+#define SF_V9_XARG4  0xa8
+#define SF_V9_XARG5  0xb0
+#define SF_V9_XXARG  0xb8
+
+#define SF_L0     0x00
+#define SF_L1     0x04
+#define SF_L2     0x08
+#define SF_L3     0x0c
+#define SF_L4     0x10
+#define SF_L5     0x14
+#define SF_L6     0x18
+#define SF_L7     0x1c
+#define SF_I0     0x20
+#define SF_I1     0x24
+#define SF_I2     0x28
+#define SF_I3     0x2c
+#define SF_I4     0x30
+#define SF_I5     0x34
+#define SF_FP     0x38
+#define SF_PC     0x3c
+#define SF_RETP   0x40
+#define SF_XARG0  0x44
+#define SF_XARG1  0x48
+#define SF_XARG2  0x4c
+#define SF_XARG3  0x50
+#define SF_XARG4  0x54
+#define SF_XARG5  0x58
+#define SF_XXARG  0x5c
+
+#ifdef __KERNEL__
+
+/* global_reg_snapshot offsets */
+#define GR_SNAP_TSTATE	0x00
+#define GR_SNAP_TPC	0x08
+#define GR_SNAP_TNPC	0x10
+#define GR_SNAP_O7	0x18
+#define GR_SNAP_I7	0x20
+#define GR_SNAP_THREAD	0x28
+#define GR_SNAP_PAD1	0x30
+#define GR_SNAP_PAD2	0x38
+
+#endif  /*  __KERNEL__  */
+
+/* Stuff for the ptrace system call */
+#define PTRACE_SPARC_DETACH       11
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+#define PTRACE_READDATA           16
+#define PTRACE_WRITEDATA          17
+#define PTRACE_READTEXT           18
+#define PTRACE_WRITETEXT          19
+#define PTRACE_GETFPAREGS         20
+#define PTRACE_SETFPAREGS         21
+
+/* There are for debugging 64-bit processes, either from a 32 or 64 bit
+ * parent.  Thus their complements are for debugging 32-bit processes only.
+ */
+
+#define PTRACE_GETREGS64	  22
+#define PTRACE_SETREGS64	  23
+/* PTRACE_SYSCALL is 24 */
+#define PTRACE_GETFPREGS64	  25
+#define PTRACE_SETFPREGS64	  26
+
+#endif /* !(_SPARC64_PTRACE_H) */
diff --git a/arch/sparc/include/asm/reboot.h b/arch/sparc/include/asm/reboot.h
new file mode 100644
index 0000000..3f3f43f
--- /dev/null
+++ b/arch/sparc/include/asm/reboot.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC64_REBOOT_H
+#define _SPARC64_REBOOT_H
+
+extern void machine_alt_power_off(void);
+
+#endif /* _SPARC64_REBOOT_H */
diff --git a/arch/sparc/include/asm/reg.h b/arch/sparc/include/asm/reg.h
new file mode 100644
index 0000000..0c16e19
--- /dev/null
+++ b/arch/sparc/include/asm/reg.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_REG_H
+#define ___ASM_SPARC_REG_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/reg_64.h>
+#else
+#include <asm/reg_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/reg_32.h b/arch/sparc/include/asm/reg_32.h
new file mode 100644
index 0000000..1efb056
--- /dev/null
+++ b/arch/sparc/include/asm/reg_32.h
@@ -0,0 +1,79 @@
+/*
+ * linux/include/asm/reg.h
+ * Layout of the registers as expected by gdb on the Sparc
+ * we should replace the user.h definitions with those in
+ * this file, we don't even use the other
+ * -miguel
+ *
+ * The names of the structures, constants and aliases in this file
+ * have the same names as the sunos ones, some programs rely on these
+ * names (gdb for example).
+ *
+ */
+
+#ifndef __SPARC_REG_H
+#define __SPARC_REG_H
+
+struct regs {
+	int     r_psr;
+#define r_ps r_psr
+        int     r_pc;
+        int     r_npc;
+        int     r_y;
+        int     r_g1;
+        int     r_g2;
+        int     r_g3;
+        int     r_g4;
+        int     r_g5;
+        int     r_g6;
+        int     r_g7;
+        int     r_o0;
+        int     r_o1;
+        int     r_o2;
+        int     r_o3;
+        int     r_o4;
+        int     r_o5;
+        int     r_o6;
+        int     r_o7;
+};
+
+struct fpq {
+        unsigned long *addr;
+        unsigned long instr;
+};
+
+struct  fq {
+        union {
+                double  whole;
+                struct  fpq fpq;
+        } FQu;
+};
+
+#define FPU_REGS_TYPE unsigned int
+#define FPU_FSR_TYPE unsigned
+
+struct fp_status {
+        union {
+                FPU_REGS_TYPE Fpu_regs[32];
+                double  Fpu_dregs[16];
+        } fpu_fr;
+        FPU_FSR_TYPE Fpu_fsr;
+        unsigned Fpu_flags;
+        unsigned Fpu_extra;
+        unsigned Fpu_qcnt;
+        struct fq Fpu_q[16];
+};
+
+#define fpu_regs  f_fpstatus.fpu_fr.Fpu_regs
+#define fpu_dregs f_fpstatus.fpu_fr.Fpu_dregs
+#define fpu_fsr   f_fpstatus.Fpu_fsr
+#define fpu_flags f_fpstatus.Fpu_flags
+#define fpu_extra f_fpstatus.Fpu_extra
+#define fpu_q     f_fpstatus.Fpu_q
+#define fpu_qcnt  f_fpstatus.Fpu_qcnt
+
+struct fpu {
+        struct fp_status f_fpstatus;
+};
+
+#endif /* __SPARC_REG_H */
diff --git a/arch/sparc/include/asm/reg_64.h b/arch/sparc/include/asm/reg_64.h
new file mode 100644
index 0000000..6f277d7
--- /dev/null
+++ b/arch/sparc/include/asm/reg_64.h
@@ -0,0 +1,56 @@
+/*
+ * linux/asm/reg.h
+ * Layout of the registers as expected by gdb on the Sparc
+ * we should replace the user.h definitions with those in
+ * this file, we don't even use the other
+ * -miguel
+ *
+ * The names of the structures, constants and aliases in this file
+ * have the same names as the sunos ones, some programs rely on these
+ * names (gdb for example).
+ *
+ */
+
+#ifndef __SPARC64_REG_H
+#define __SPARC64_REG_H
+
+struct regs {
+        unsigned long r_g1;
+        unsigned long r_g2;
+        unsigned long r_g3;
+        unsigned long r_g4;
+        unsigned long r_g5;
+        unsigned long r_g6;
+        unsigned long r_g7;
+        unsigned long r_o0;
+        unsigned long r_o1;
+        unsigned long r_o2;
+        unsigned long r_o3;
+        unsigned long r_o4;
+        unsigned long r_o5;
+        unsigned long r_o6;
+        unsigned long r_o7;
+        unsigned long __pad;
+        unsigned long r_tstate;
+        unsigned long r_tpc;
+        unsigned long r_tnpc;
+        unsigned int  r_y;
+        unsigned int  r_fprs;
+};
+
+#define FPU_REGS_TYPE unsigned int
+#define FPU_FSR_TYPE unsigned long
+
+struct fp_status {
+        unsigned long fpu_fr[32];
+        unsigned long Fpu_fsr;
+};
+
+struct fpu {
+	struct fp_status f_fpstatus;
+};
+
+#define fpu_regs  f_fpstatus.fpu_fr
+#define fpu_fsr   f_fpstatus.Fpu_fsr
+
+#endif /* __SPARC64_REG_H */
diff --git a/arch/sparc/include/asm/resource.h b/arch/sparc/include/asm/resource.h
new file mode 100644
index 0000000..fe163ca
--- /dev/null
+++ b/arch/sparc/include/asm/resource.h
@@ -0,0 +1,30 @@
+/*
+ * resource.h: Resource definitions.
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_RESOURCE_H
+#define _SPARC_RESOURCE_H
+
+/*
+ * These two resource limit IDs have a Sparc/Linux-specific ordering,
+ * the rest comes from the generic header:
+ */
+#define RLIMIT_NOFILE		6	/* max number of open files */
+#define RLIMIT_NPROC		7	/* max number of processes */
+
+#if defined(__sparc__) && defined(__arch64__)
+/* Use generic version */
+#else
+/*
+ * SuS says limits have to be unsigned.
+ * We make this unsigned, but keep the
+ * old value for compatibility:
+ */
+#define RLIM_INFINITY		0x7fffffff
+#endif
+
+#include <asm-generic/resource.h>
+
+#endif /* !(_SPARC_RESOURCE_H) */
diff --git a/arch/sparc/include/asm/ross.h b/arch/sparc/include/asm/ross.h
new file mode 100644
index 0000000..ecb6e81
--- /dev/null
+++ b/arch/sparc/include/asm/ross.h
@@ -0,0 +1,191 @@
+/*
+ * ross.h: Ross module specific definitions and defines.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_ROSS_H
+#define _SPARC_ROSS_H
+
+#include <asm/asi.h>
+#include <asm/page.h>
+
+/* Ross made Hypersparcs have a %psr 'impl' field of '0001'.  The 'vers'
+ * field has '1111'.
+ */
+
+/* The MMU control register fields on the HyperSparc.
+ *
+ * -----------------------------------------------------------------
+ * |implvers| RSV |CWR|SE|WBE| MID |BM| C|CS|MR|CM|RSV|CE|RSV|NF|ME|
+ * -----------------------------------------------------------------
+ *  31    24 23-22 21  20  19 18-15 14 13 12 11 10  9   8 7-2  1  0
+ *
+ * Phew, lots of fields there ;-)
+ *
+ * CWR: Cache Wrapping Enabled, if one cache wrapping is on.
+ * SE: Snoop Enable, turns on bus snooping for cache activity if one.
+ * WBE: Write Buffer Enable, one turns it on.
+ * MID: The ModuleID of the chip for MBus transactions.
+ * BM: Boot-Mode. One indicates the MMU is in boot mode.
+ * C: Indicates whether accesses are cachable while the MMU is
+ *    disabled.
+ * CS: Cache Size -- 0 = 128k, 1 = 256k
+ * MR: Memory Reflection, one indicates that the memory bus connected
+ *     to the MBus supports memory reflection.
+ * CM: Cache Mode -- 0 = write-through, 1 = copy-back
+ * CE: Cache Enable -- 0 = no caching, 1 = cache is on
+ * NF: No Fault -- 0 = faults trap the CPU from supervisor mode
+ *                 1 = faults from supervisor mode do not generate traps
+ * ME: MMU Enable -- 0 = MMU is off, 1 = MMU is on
+ */
+
+#define HYPERSPARC_CWENABLE   0x00200000
+#define HYPERSPARC_SBENABLE   0x00100000
+#define HYPERSPARC_WBENABLE   0x00080000
+#define HYPERSPARC_MIDMASK    0x00078000
+#define HYPERSPARC_BMODE      0x00004000
+#define HYPERSPARC_ACENABLE   0x00002000
+#define HYPERSPARC_CSIZE      0x00001000
+#define HYPERSPARC_MRFLCT     0x00000800
+#define HYPERSPARC_CMODE      0x00000400
+#define HYPERSPARC_CENABLE    0x00000100
+#define HYPERSPARC_NFAULT     0x00000002
+#define HYPERSPARC_MENABLE    0x00000001
+
+
+/* The ICCR instruction cache register on the HyperSparc.
+ *
+ * -----------------------------------------------
+ * |                                 | FTD | ICE |
+ * -----------------------------------------------
+ *  31                                  1     0
+ *
+ * This register is accessed using the V8 'wrasr' and 'rdasr'
+ * opcodes, since not all assemblers understand them and those
+ * that do use different semantics I will just hard code the
+ * instruction with a '.word' statement.
+ *
+ * FTD:  If set to one flush instructions executed during an
+ *       instruction cache hit occurs, the corresponding line
+ *       for said cache-hit is invalidated.  If FTD is zero,
+ *       an unimplemented 'flush' trap will occur when any
+ *       flush is executed by the processor.
+ *
+ * ICE:  If set to one, the instruction cache is enabled.  If
+ *       zero, the cache will not be used for instruction fetches.
+ *
+ * All other bits are read as zeros, and writes to them have no
+ * effect.
+ *
+ * Wheee, not many assemblers understand the %iccr register nor
+ * the generic asr r/w instructions.
+ *
+ *  1000 0011 0100 0111 1100 0000 0000 0000   ! rd %iccr, %g1
+ *
+ * 0x  8    3    4    7    c    0    0    0   ! 0x8347c000
+ *
+ *  1011 1111 1000 0000 0110 0000 0000 0000   ! wr %g1, 0x0, %iccr
+ *
+ * 0x  b    f    8    0    6    0    0    0   ! 0xbf806000
+ *
+ */
+
+#define HYPERSPARC_ICCR_FTD     0x00000002
+#define HYPERSPARC_ICCR_ICE     0x00000001
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned int get_ross_icr(void)
+{
+	unsigned int icreg;
+
+	__asm__ __volatile__(".word 0x8347c000\n\t" /* rd %iccr, %g1 */
+			     "mov %%g1, %0\n\t"
+			     : "=r" (icreg)
+			     : /* no inputs */
+			     : "g1", "memory");
+
+	return icreg;
+}
+
+static inline void put_ross_icr(unsigned int icreg)
+{
+	__asm__ __volatile__("or %%g0, %0, %%g1\n\t"
+			     ".word 0xbf806000\n\t" /* wr %g1, 0x0, %iccr */
+			     "nop\n\t"
+			     "nop\n\t"
+			     "nop\n\t"
+			     : /* no outputs */
+			     : "r" (icreg)
+			     : "g1", "memory");
+
+	return;
+}
+
+/* HyperSparc specific cache flushing. */
+
+/* This is for the on-chip instruction cache. */
+static inline void hyper_flush_whole_icache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_FLUSH_IWHOLE)
+			     : "memory");
+	return;
+}
+
+extern int vac_cache_size;
+extern int vac_line_size;
+
+static inline void hyper_clear_all_tags(void)
+{
+	unsigned long addr;
+
+	for(addr = 0; addr < vac_cache_size; addr += vac_line_size)
+		__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+				     : /* no outputs */
+				     : "r" (addr), "i" (ASI_M_DATAC_TAG)
+				     : "memory");
+}
+
+static inline void hyper_flush_unconditional_combined(void)
+{
+	unsigned long addr;
+
+	for (addr = 0; addr < vac_cache_size; addr += vac_line_size)
+		__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+				     : /* no outputs */
+				     : "r" (addr), "i" (ASI_M_FLUSH_CTX)
+				     : "memory");
+}
+
+static inline void hyper_flush_cache_user(void)
+{
+	unsigned long addr;
+
+	for (addr = 0; addr < vac_cache_size; addr += vac_line_size)
+		__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+				     : /* no outputs */
+				     : "r" (addr), "i" (ASI_M_FLUSH_USER)
+				     : "memory");
+}
+
+static inline void hyper_flush_cache_page(unsigned long page)
+{
+	unsigned long end;
+
+	page &= PAGE_MASK;
+	end = page + PAGE_SIZE;
+	while (page < end) {
+		__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+				     : /* no outputs */
+				     : "r" (page), "i" (ASI_M_FLUSH_PAGE)
+				     : "memory");
+		page += vac_line_size;
+	}
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_ROSS_H) */
diff --git a/arch/sparc/include/asm/rtc.h b/arch/sparc/include/asm/rtc.h
new file mode 100644
index 0000000..f9ecb1f
--- /dev/null
+++ b/arch/sparc/include/asm/rtc.h
@@ -0,0 +1,26 @@
+/*
+ * rtc.h: Definitions for access to the Mostek real time clock
+ *
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ */
+
+#ifndef _RTC_H
+#define _RTC_H
+
+#include <linux/ioctl.h>
+
+struct rtc_time
+{
+	int	sec;	/* Seconds (0-59) */
+	int	min;	/* Minutes (0-59) */
+	int	hour;	/* Hour (0-23) */
+	int	dow;	/* Day of the week (1-7) */
+	int	dom;	/* Day of the month (1-31) */
+	int	month;	/* Month of year (1-12) */
+	int	year;	/* Year (0-99) */
+};
+
+#define RTCGET _IOR('p', 20, struct rtc_time)
+#define RTCSET _IOW('p', 21, struct rtc_time)
+
+#endif
diff --git a/arch/sparc/include/asm/rwsem-const.h b/arch/sparc/include/asm/rwsem-const.h
new file mode 100644
index 0000000..a303c9d
--- /dev/null
+++ b/arch/sparc/include/asm/rwsem-const.h
@@ -0,0 +1,12 @@
+/* rwsem-const.h: RW semaphore counter constants.  */
+#ifndef _SPARC64_RWSEM_CONST_H
+#define _SPARC64_RWSEM_CONST_H
+
+#define RWSEM_UNLOCKED_VALUE		0x00000000
+#define RWSEM_ACTIVE_BIAS		0x00000001
+#define RWSEM_ACTIVE_MASK		0x0000ffff
+#define RWSEM_WAITING_BIAS		0xffff0000
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+
+#endif /* _SPARC64_RWSEM_CONST_H */
diff --git a/arch/sparc/include/asm/rwsem.h b/arch/sparc/include/asm/rwsem.h
new file mode 100644
index 0000000..1dc129a
--- /dev/null
+++ b/arch/sparc/include/asm/rwsem.h
@@ -0,0 +1,84 @@
+/*
+ * rwsem.h: R/W semaphores implemented using CAS
+ *
+ * Written by David S. Miller (davem@redhat.com), 2001.
+ * Derived from asm-i386/rwsem.h
+ */
+#ifndef _SPARC64_RWSEM_H
+#define _SPARC64_RWSEM_H
+
+#ifndef _LINUX_RWSEM_H
+#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
+#endif
+
+#ifdef __KERNEL__
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/rwsem-const.h>
+
+struct rwsem_waiter;
+
+struct rw_semaphore {
+	signed int count;
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map	dep_map;
+#endif
+};
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
+#else
+# define __RWSEM_DEP_MAP_INIT(lockname)
+#endif
+
+#define __RWSEM_INITIALIZER(name) \
+{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) \
+  __RWSEM_DEP_MAP_INIT(name) }
+
+#define DECLARE_RWSEM(name) \
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
+			 struct lock_class_key *key);
+
+#define init_rwsem(sem)						\
+do {								\
+	static struct lock_class_key __key;			\
+								\
+	__init_rwsem((sem), #sem, &__key);			\
+} while (0)
+
+extern void __down_read(struct rw_semaphore *sem);
+extern int __down_read_trylock(struct rw_semaphore *sem);
+extern void __down_write(struct rw_semaphore *sem);
+extern int __down_write_trylock(struct rw_semaphore *sem);
+extern void __up_read(struct rw_semaphore *sem);
+extern void __up_write(struct rw_semaphore *sem);
+extern void __downgrade_write(struct rw_semaphore *sem);
+
+static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
+{
+	__down_write(sem);
+}
+
+static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
+{
+	return atomic_add_return(delta, (atomic_t *)(&sem->count));
+}
+
+static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
+{
+	atomic_add(delta, (atomic_t *)(&sem->count));
+}
+
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+	return (sem->count != 0);
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _SPARC64_RWSEM_H */
diff --git a/arch/sparc/include/asm/sbi.h b/arch/sparc/include/asm/sbi.h
new file mode 100644
index 0000000..5eb7f19
--- /dev/null
+++ b/arch/sparc/include/asm/sbi.h
@@ -0,0 +1,115 @@
+/*
+ * sbi.h:  SBI (Sbus Interface on sun4d) definitions
+ *
+ * Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz>
+ */
+
+#ifndef _SPARC_SBI_H
+#define _SPARC_SBI_H
+
+#include <asm/obio.h>
+
+/* SBI */
+struct sbi_regs {
+/* 0x0000 */	u32		cid;		/* Component ID */
+/* 0x0004 */	u32		ctl;		/* Control */
+/* 0x0008 */	u32		status;		/* Status */
+		u32		_unused1;
+		
+/* 0x0010 */	u32		cfg0;		/* Slot0 config reg */
+/* 0x0014 */	u32		cfg1;		/* Slot1 config reg */
+/* 0x0018 */	u32		cfg2;		/* Slot2 config reg */
+/* 0x001c */	u32		cfg3;		/* Slot3 config reg */
+
+/* 0x0020 */	u32		stb0;		/* Streaming buf control for slot 0 */
+/* 0x0024 */	u32		stb1;		/* Streaming buf control for slot 1 */
+/* 0x0028 */	u32		stb2;		/* Streaming buf control for slot 2 */
+/* 0x002c */	u32		stb3;		/* Streaming buf control for slot 3 */
+
+/* 0x0030 */	u32		intr_state;	/* Interrupt state */
+/* 0x0034 */	u32		intr_tid;	/* Interrupt target ID */
+/* 0x0038 */	u32		intr_diag;	/* Interrupt diagnostics */
+};
+
+#define SBI_CID			0x02800000
+#define SBI_CTL			0x02800004
+#define SBI_STATUS		0x02800008
+#define SBI_CFG0		0x02800010
+#define SBI_CFG1		0x02800014
+#define SBI_CFG2		0x02800018
+#define SBI_CFG3		0x0280001c
+#define SBI_STB0		0x02800020
+#define SBI_STB1		0x02800024
+#define SBI_STB2		0x02800028
+#define SBI_STB3		0x0280002c
+#define SBI_INTR_STATE		0x02800030
+#define SBI_INTR_TID		0x02800034
+#define SBI_INTR_DIAG		0x02800038
+
+/* Burst bits for 8, 16, 32, 64 are in cfgX registers at bits 2, 3, 4, 5 respectively */
+#define SBI_CFG_BURST_MASK	0x0000001e
+
+/* How to make devid from sbi no */
+#define SBI2DEVID(sbino) ((sbino<<4)|2)
+
+/* intr_state has 4 bits for slots 0 .. 3 and these bits are repeated for each sbus irq level
+ *
+ *		   +-------+-------+-------+-------+-------+-------+-------+-------+
+ *  SBUS IRQ LEVEL |   7   |   6   |   5   |   4   |   3   |   2   |   1   |       |
+ *		   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Reser |
+ *  SLOT #         |3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|  ved  |
+ *                 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-------+
+ *  Bits           31      27      23      19      15      11      7       3      0
+ */
+
+
+#ifndef __ASSEMBLY__
+
+static inline int acquire_sbi(int devid, int mask)
+{
+	__asm__ __volatile__ ("swapa [%2] %3, %0" :
+			      "=r" (mask) :
+			      "0" (mask),
+			      "r" (ECSR_DEV_BASE(devid) | SBI_INTR_STATE),
+			      "i" (ASI_M_CTL));
+	return mask;
+}
+
+static inline void release_sbi(int devid, int mask)
+{
+	__asm__ __volatile__ ("sta %0, [%1] %2" : :
+			      "r" (mask),
+			      "r" (ECSR_DEV_BASE(devid) | SBI_INTR_STATE),
+			      "i" (ASI_M_CTL));
+}
+
+static inline void set_sbi_tid(int devid, int targetid)
+{
+	__asm__ __volatile__ ("sta %0, [%1] %2" : :
+			      "r" (targetid),
+			      "r" (ECSR_DEV_BASE(devid) | SBI_INTR_TID),
+			      "i" (ASI_M_CTL));
+}
+
+static inline int get_sbi_ctl(int devid, int cfgno)
+{
+	int cfg;
+	
+	__asm__ __volatile__ ("lda [%1] %2, %0" :
+			      "=r" (cfg) :
+			      "r" ((ECSR_DEV_BASE(devid) | SBI_CFG0) + (cfgno<<2)),
+			      "i" (ASI_M_CTL));
+	return cfg;
+}
+
+static inline void set_sbi_ctl(int devid, int cfgno, int cfg)
+{
+	__asm__ __volatile__ ("sta %0, [%1] %2" : :
+			      "r" (cfg),
+			      "r" ((ECSR_DEV_BASE(devid) | SBI_CFG0) + (cfgno<<2)),
+			      "i" (ASI_M_CTL));
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_SBI_H) */
diff --git a/arch/sparc/include/asm/sbus.h b/arch/sparc/include/asm/sbus.h
new file mode 100644
index 0000000..f82481a
--- /dev/null
+++ b/arch/sparc/include/asm/sbus.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SBUS_H
+#define ___ASM_SPARC_SBUS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/sbus_64.h>
+#else
+#include <asm/sbus_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/sbus_32.h b/arch/sparc/include/asm/sbus_32.h
new file mode 100644
index 0000000..77b5d3a
--- /dev/null
+++ b/arch/sparc/include/asm/sbus_32.h
@@ -0,0 +1,153 @@
+/*
+ * sbus.h:  Defines for the Sun SBus.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SBUS_H
+#define _SPARC_SBUS_H
+
+#include <linux/dma-mapping.h>
+#include <linux/ioport.h>
+
+#include <asm/oplib.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+#include <asm/scatterlist.h>
+
+/* We scan which devices are on the SBus using the PROM node device
+ * tree.  SBus devices are described in two different ways.  You can
+ * either get an absolute address at which to access the device, or
+ * you can get a SBus 'slot' number and an offset within that slot.
+ */
+
+/* The base address at which to calculate device OBIO addresses. */
+#define SUN_SBUS_BVADDR        0xf8000000
+#define SBUS_OFF_MASK          0x01ffffff
+
+/* These routines are used to calculate device address from slot
+ * numbers + offsets, and vice versa.
+ */
+
+static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset)
+{
+  return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<25)+(offset));
+}
+
+static inline int sbus_dev_slot(unsigned long dev_addr)
+{
+  return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>25);
+}
+
+struct sbus_bus;
+
+/* Linux SBUS device tables */
+struct sbus_dev {
+	struct of_device	ofdev;
+	struct sbus_bus		*bus;
+	struct sbus_dev		*next;
+	struct sbus_dev		*child;
+	struct sbus_dev		*parent;
+	int prom_node;
+	char prom_name[64];
+	int slot;
+
+	struct resource resource[PROMREG_MAX];
+
+	struct linux_prom_registers reg_addrs[PROMREG_MAX];
+	int num_registers;
+
+	struct linux_prom_ranges device_ranges[PROMREG_MAX];
+	int num_device_ranges;
+
+	unsigned int irqs[4];
+	int num_irqs;
+};
+#define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev)
+
+/* This struct describes the SBus(s) found on this machine. */
+struct sbus_bus {
+	struct of_device	ofdev;
+	struct sbus_dev		*devices;	/* Link to devices on this SBus */
+	struct sbus_bus		*next;		/* next SBus, if more than one SBus */
+	int			prom_node;	/* PROM device tree node for this SBus */
+	char			prom_name[64];  /* Usually "sbus" or "sbi" */
+	int			clock_freq;
+
+	struct linux_prom_ranges sbus_ranges[PROMREG_MAX];
+	int num_sbus_ranges;
+
+	int devid;
+	int board;
+};
+#define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev)
+
+extern struct sbus_bus *sbus_root;
+
+static inline int
+sbus_is_slave(struct sbus_dev *dev)
+{
+	/* XXX Have to write this for sun4c's */
+	return 0;
+}
+
+/* Device probing routines could find these handy */
+#define for_each_sbus(bus) \
+        for((bus) = sbus_root; (bus); (bus)=(bus)->next)
+
+#define for_each_sbusdev(device, bus) \
+        for((device) = (bus)->devices; (device); (device)=(device)->next)
+
+#define for_all_sbusdev(device, bus) \
+	for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \
+		for ((device) = (bus)->devices; (device); (device) = (device)->next)
+
+/* Driver DVMA interfaces. */
+#define sbus_can_dma_64bit(sdev)	(0) /* actually, sparc_cpu_model==sun4d */
+#define sbus_can_burst64(sdev)		(0) /* actually, sparc_cpu_model==sun4d */
+extern void sbus_set_sbus64(struct sbus_dev *, int);
+extern void sbus_fill_device_irq(struct sbus_dev *);
+
+/* These yield IOMMU mappings in consistent mode. */
+extern void *sbus_alloc_consistent(struct sbus_dev *, long, u32 *dma_addrp);
+extern void sbus_free_consistent(struct sbus_dev *, long, void *, u32);
+void prom_adjust_ranges(struct linux_prom_ranges *, int,
+			struct linux_prom_ranges *, int);
+
+#define SBUS_DMA_BIDIRECTIONAL	DMA_BIDIRECTIONAL
+#define SBUS_DMA_TODEVICE	DMA_TO_DEVICE
+#define SBUS_DMA_FROMDEVICE	DMA_FROM_DEVICE
+#define	SBUS_DMA_NONE		DMA_NONE
+
+/* All the rest use streaming mode mappings. */
+extern dma_addr_t sbus_map_single(struct sbus_dev *, void *, size_t, int);
+extern void sbus_unmap_single(struct sbus_dev *, dma_addr_t, size_t, int);
+extern int sbus_map_sg(struct sbus_dev *, struct scatterlist *, int, int);
+extern void sbus_unmap_sg(struct sbus_dev *, struct scatterlist *, int, int);
+
+/* Finally, allow explicit synchronization of streamable mappings. */
+extern void sbus_dma_sync_single_for_cpu(struct sbus_dev *, dma_addr_t, size_t, int);
+#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu
+extern void sbus_dma_sync_single_for_device(struct sbus_dev *, dma_addr_t, size_t, int);
+extern void sbus_dma_sync_sg_for_cpu(struct sbus_dev *, struct scatterlist *, int, int);
+#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu
+extern void sbus_dma_sync_sg_for_device(struct sbus_dev *, struct scatterlist *, int, int);
+
+/* Eric Brower (ebrower@usa.net)
+ * Translate SBus interrupt levels to ino values--
+ * this is used when converting sbus "interrupts" OBP
+ * node values to "intr" node values, and is platform
+ * dependent.  If only we could call OBP with
+ * "sbus-intr>cpu (sbint -- ino)" from kernel...
+ * See .../drivers/sbus/sbus.c for details.
+ */
+BTFIXUPDEF_CALL(unsigned int, sbint_to_irq, struct sbus_dev *sdev, unsigned int)
+#define sbint_to_irq(sdev, sbint) BTFIXUP_CALL(sbint_to_irq)(sdev, sbint)
+
+extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *);
+extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *);
+extern void sbus_setup_arch_props(struct sbus_bus *, struct device_node *);
+extern int sbus_arch_preinit(void);
+extern void sbus_arch_postinit(void);
+
+#endif /* !(_SPARC_SBUS_H) */
diff --git a/arch/sparc/include/asm/sbus_64.h b/arch/sparc/include/asm/sbus_64.h
new file mode 100644
index 0000000..0e16b6d
--- /dev/null
+++ b/arch/sparc/include/asm/sbus_64.h
@@ -0,0 +1,190 @@
+/* sbus.h: Defines for the Sun SBus.
+ *
+ * Copyright (C) 1996, 1999, 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC64_SBUS_H
+#define _SPARC64_SBUS_H
+
+#include <linux/dma-mapping.h>
+#include <linux/ioport.h>
+
+#include <asm/oplib.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+#include <asm/iommu.h>
+#include <asm/scatterlist.h>
+
+/* We scan which devices are on the SBus using the PROM node device
+ * tree.  SBus devices are described in two different ways.  You can
+ * either get an absolute address at which to access the device, or
+ * you can get a SBus 'slot' number and an offset within that slot.
+ */
+
+/* The base address at which to calculate device OBIO addresses. */
+#define SUN_SBUS_BVADDR        0x00000000
+#define SBUS_OFF_MASK          0x0fffffff
+
+/* These routines are used to calculate device address from slot
+ * numbers + offsets, and vice versa.
+ */
+
+static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset)
+{
+  return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<28)+(offset));
+}
+
+static inline int sbus_dev_slot(unsigned long dev_addr)
+{
+  return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>28);
+}
+
+struct sbus_bus;
+
+/* Linux SBUS device tables */
+struct sbus_dev {
+	struct of_device	ofdev;
+	struct sbus_bus		*bus;
+	struct sbus_dev		*next;
+	struct sbus_dev		*child;
+	struct sbus_dev		*parent;
+	int prom_node;
+	char prom_name[64];
+	int slot;
+
+	struct resource resource[PROMREG_MAX];
+
+	struct linux_prom_registers reg_addrs[PROMREG_MAX];
+	int num_registers;
+
+	struct linux_prom_ranges device_ranges[PROMREG_MAX];
+	int num_device_ranges;
+
+	unsigned int irqs[4];
+	int num_irqs;
+};
+#define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev)
+
+/* This struct describes the SBus(s) found on this machine. */
+struct sbus_bus {
+	struct of_device	ofdev;
+	struct sbus_dev		*devices;	/* Tree of SBUS devices	*/
+	struct sbus_bus		*next;		/* Next SBUS in system	*/
+	int			prom_node;      /* OBP node of SBUS	*/
+	char			prom_name[64];	/* Usually "sbus" or "sbi" */
+	int			clock_freq;
+
+	struct linux_prom_ranges sbus_ranges[PROMREG_MAX];
+	int num_sbus_ranges;
+
+	int portid;
+};
+#define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev)
+
+extern struct sbus_bus *sbus_root;
+
+/* Device probing routines could find these handy */
+#define for_each_sbus(bus) \
+        for((bus) = sbus_root; (bus); (bus)=(bus)->next)
+
+#define for_each_sbusdev(device, bus) \
+        for((device) = (bus)->devices; (device); (device)=(device)->next)
+
+#define for_all_sbusdev(device, bus) \
+	for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \
+		for ((device) = (bus)->devices; (device); (device) = (device)->next)
+
+/* Driver DVMA interfaces. */
+#define sbus_can_dma_64bit(sdev)	(1)
+#define sbus_can_burst64(sdev)		(1)
+extern void sbus_set_sbus64(struct sbus_dev *, int);
+extern void sbus_fill_device_irq(struct sbus_dev *);
+
+static inline void *sbus_alloc_consistent(struct sbus_dev *sdev , size_t size,
+					  dma_addr_t *dma_handle)
+{
+	return dma_alloc_coherent(&sdev->ofdev.dev, size,
+				  dma_handle, GFP_ATOMIC);
+}
+
+static inline void sbus_free_consistent(struct sbus_dev *sdev, size_t size,
+					void *vaddr, dma_addr_t dma_handle)
+{
+	return dma_free_coherent(&sdev->ofdev.dev, size, vaddr, dma_handle);
+}
+
+#define SBUS_DMA_BIDIRECTIONAL	DMA_BIDIRECTIONAL
+#define SBUS_DMA_TODEVICE	DMA_TO_DEVICE
+#define SBUS_DMA_FROMDEVICE	DMA_FROM_DEVICE
+#define	SBUS_DMA_NONE		DMA_NONE
+
+/* All the rest use streaming mode mappings. */
+static inline dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *ptr,
+					 size_t size, int direction)
+{
+	return dma_map_single(&sdev->ofdev.dev, ptr, size,
+			      (enum dma_data_direction) direction);
+}
+
+static inline void sbus_unmap_single(struct sbus_dev *sdev,
+				     dma_addr_t dma_addr, size_t size,
+				     int direction)
+{
+	dma_unmap_single(&sdev->ofdev.dev, dma_addr, size,
+			 (enum dma_data_direction) direction);
+}
+
+static inline int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg,
+			      int nents, int direction)
+{
+	return dma_map_sg(&sdev->ofdev.dev, sg, nents,
+			  (enum dma_data_direction) direction);
+}
+
+static inline void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg,
+				 int nents, int direction)
+{
+	dma_unmap_sg(&sdev->ofdev.dev, sg, nents,
+		     (enum dma_data_direction) direction);
+}
+
+/* Finally, allow explicit synchronization of streamable mappings. */
+static inline void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev,
+						dma_addr_t dma_handle,
+						size_t size, int direction)
+{
+	dma_sync_single_for_cpu(&sdev->ofdev.dev, dma_handle, size,
+				(enum dma_data_direction) direction);
+}
+#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu
+
+static inline void sbus_dma_sync_single_for_device(struct sbus_dev *sdev,
+						   dma_addr_t dma_handle,
+						   size_t size, int direction)
+{
+	/* No flushing needed to sync cpu writes to the device.  */
+}
+
+static inline void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev,
+					    struct scatterlist *sg,
+					    int nents, int direction)
+{
+	dma_sync_sg_for_cpu(&sdev->ofdev.dev, sg, nents,
+			    (enum dma_data_direction) direction);
+}
+#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu
+
+static inline void sbus_dma_sync_sg_for_device(struct sbus_dev *sdev,
+					       struct scatterlist *sg,
+					       int nents, int direction)
+{
+	/* No flushing needed to sync cpu writes to the device.  */
+}
+
+extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *);
+extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *);
+extern void sbus_setup_arch_props(struct sbus_bus *, struct device_node *);
+extern int sbus_arch_preinit(void);
+extern void sbus_arch_postinit(void);
+
+#endif /* !(_SPARC64_SBUS_H) */
diff --git a/arch/sparc/include/asm/scatterlist.h b/arch/sparc/include/asm/scatterlist.h
new file mode 100644
index 0000000..ec21a45
--- /dev/null
+++ b/arch/sparc/include/asm/scatterlist.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SCATTERLIST_H
+#define ___ASM_SPARC_SCATTERLIST_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/scatterlist_64.h>
+#else
+#include <asm/scatterlist_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/scatterlist_32.h b/arch/sparc/include/asm/scatterlist_32.h
new file mode 100644
index 0000000..c82609c
--- /dev/null
+++ b/arch/sparc/include/asm/scatterlist_32.h
@@ -0,0 +1,26 @@
+#ifndef _SPARC_SCATTERLIST_H
+#define _SPARC_SCATTERLIST_H
+
+#include <linux/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long sg_magic;
+#endif
+	unsigned long page_link;
+	unsigned int offset;
+
+	unsigned int length;
+
+	__u32 dvma_address; /* A place to hang host-specific addresses at. */
+	__u32 dvma_length;
+};
+
+#define sg_dma_address(sg) ((sg)->dvma_address)
+#define sg_dma_len(sg)     ((sg)->dvma_length)
+
+#define ISA_DMA_THRESHOLD (~0UL)
+
+#define ARCH_HAS_SG_CHAIN
+
+#endif /* !(_SPARC_SCATTERLIST_H) */
diff --git a/arch/sparc/include/asm/scatterlist_64.h b/arch/sparc/include/asm/scatterlist_64.h
new file mode 100644
index 0000000..81bd058
--- /dev/null
+++ b/arch/sparc/include/asm/scatterlist_64.h
@@ -0,0 +1,27 @@
+#ifndef _SPARC64_SCATTERLIST_H
+#define _SPARC64_SCATTERLIST_H
+
+#include <asm/page.h>
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long	sg_magic;
+#endif
+	unsigned long	page_link;
+	unsigned int	offset;
+
+	unsigned int	length;
+
+	dma_addr_t	dma_address;
+	__u32		dma_length;
+};
+
+#define sg_dma_address(sg)	((sg)->dma_address)
+#define sg_dma_len(sg)     	((sg)->dma_length)
+
+#define ISA_DMA_THRESHOLD	(~0UL)
+
+#define ARCH_HAS_SG_CHAIN
+
+#endif /* !(_SPARC64_SCATTERLIST_H) */
diff --git a/arch/sparc/include/asm/scratchpad.h b/arch/sparc/include/asm/scratchpad.h
new file mode 100644
index 0000000..5e8b01f
--- /dev/null
+++ b/arch/sparc/include/asm/scratchpad.h
@@ -0,0 +1,14 @@
+#ifndef _SPARC64_SCRATCHPAD_H
+#define _SPARC64_SCRATCHPAD_H
+
+/* Sun4v scratchpad registers, accessed via ASI_SCRATCHPAD.  */
+
+#define SCRATCHPAD_MMU_MISS	0x00 /* Shared with OBP - set by OBP	    */
+#define SCRATCHPAD_CPUID	0x08 /* Shared with OBP - set by hypervisor */
+#define SCRATCHPAD_UTSBREG1	0x10
+#define SCRATCHPAD_UTSBREG2	0x18
+	/* 0x20 and 0x28, hypervisor only... */
+#define SCRATCHPAD_UNUSED1	0x30
+#define SCRATCHPAD_UNUSED2	0x38 /* Reserved for OBP		    */
+
+#endif /* !(_SPARC64_SCRATCHPAD_H) */
diff --git a/arch/sparc/include/asm/seccomp.h b/arch/sparc/include/asm/seccomp.h
new file mode 100644
index 0000000..7fcd996
--- /dev/null
+++ b/arch/sparc/include/asm/seccomp.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_SECCOMP_H
+
+#include <linux/thread_info.h> /* already defines TIF_32BIT */
+
+#ifndef TIF_32BIT
+#error "unexpected TIF_32BIT on sparc64"
+#endif
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+#define __NR_seccomp_read_32 __NR_read
+#define __NR_seccomp_write_32 __NR_write
+#define __NR_seccomp_exit_32 __NR_exit
+#define __NR_seccomp_sigreturn_32 __NR_sigreturn
+
+#endif /* _ASM_SECCOMP_H */
diff --git a/arch/sparc/include/asm/sections.h b/arch/sparc/include/asm/sections.h
new file mode 100644
index 0000000..c7c69b0
--- /dev/null
+++ b/arch/sparc/include/asm/sections.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SECTIONS_H
+#define ___ASM_SPARC_SECTIONS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/sections_64.h>
+#else
+#include <asm/sections_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/sections_32.h b/arch/sparc/include/asm/sections_32.h
new file mode 100644
index 0000000..6832841
--- /dev/null
+++ b/arch/sparc/include/asm/sections_32.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC_SECTIONS_H
+#define _SPARC_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+#endif
diff --git a/arch/sparc/include/asm/sections_64.h b/arch/sparc/include/asm/sections_64.h
new file mode 100644
index 0000000..3f4b9fd
--- /dev/null
+++ b/arch/sparc/include/asm/sections_64.h
@@ -0,0 +1,9 @@
+#ifndef _SPARC64_SECTIONS_H
+#define _SPARC64_SECTIONS_H
+
+/* nothing to see, move along */
+#include <asm-generic/sections.h>
+
+extern char _start[];
+
+#endif
diff --git a/arch/sparc/include/asm/sembuf.h b/arch/sparc/include/asm/sembuf.h
new file mode 100644
index 0000000..faee1be
--- /dev/null
+++ b/arch/sparc/include/asm/sembuf.h
@@ -0,0 +1,31 @@
+#ifndef _SPARC_SEMBUF_H
+#define _SPARC_SEMBUF_H
+
+/*
+ * The semid64_ds structure for sparc architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+#if defined(__sparc__) && defined(__arch64__)
+# define PADDING(x)
+#else
+# define PADDING(x) unsigned int x;
+#endif
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	PADDING(__pad1)
+	__kernel_time_t	sem_otime;		/* last semop time */
+	PADDING(__pad2)
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+#undef PADDING
+
+#endif /* _SPARC64_SEMBUF_H */
diff --git a/arch/sparc/include/asm/setup.h b/arch/sparc/include/asm/setup.h
new file mode 100644
index 0000000..2643c62
--- /dev/null
+++ b/arch/sparc/include/asm/setup.h
@@ -0,0 +1,14 @@
+/*
+ *	Just a place holder. 
+ */
+
+#ifndef _SPARC_SETUP_H
+#define _SPARC_SETUP_H
+
+#if defined(__sparc__) && defined(__arch64__)
+# define COMMAND_LINE_SIZE 2048
+#else
+# define COMMAND_LINE_SIZE 256
+#endif
+
+#endif /* _SPARC_SETUP_H */
diff --git a/arch/sparc/include/asm/sfafsr.h b/arch/sparc/include/asm/sfafsr.h
new file mode 100644
index 0000000..e96137b
--- /dev/null
+++ b/arch/sparc/include/asm/sfafsr.h
@@ -0,0 +1,82 @@
+#ifndef _SPARC64_SFAFSR_H
+#define _SPARC64_SFAFSR_H
+
+#include <linux/const.h>
+
+/* Spitfire Asynchronous Fault Status register, ASI=0x4C VA<63:0>=0x0 */
+
+#define SFAFSR_ME		(_AC(1,UL) << SFAFSR_ME_SHIFT)
+#define SFAFSR_ME_SHIFT		32
+#define SFAFSR_PRIV		(_AC(1,UL) << SFAFSR_PRIV_SHIFT)
+#define SFAFSR_PRIV_SHIFT	31
+#define SFAFSR_ISAP		(_AC(1,UL) << SFAFSR_ISAP_SHIFT)
+#define SFAFSR_ISAP_SHIFT	30
+#define SFAFSR_ETP		(_AC(1,UL) << SFAFSR_ETP_SHIFT)
+#define SFAFSR_ETP_SHIFT	29
+#define SFAFSR_IVUE		(_AC(1,UL) << SFAFSR_IVUE_SHIFT)
+#define SFAFSR_IVUE_SHIFT	28
+#define SFAFSR_TO		(_AC(1,UL) << SFAFSR_TO_SHIFT)
+#define SFAFSR_TO_SHIFT		27
+#define SFAFSR_BERR		(_AC(1,UL) << SFAFSR_BERR_SHIFT)
+#define SFAFSR_BERR_SHIFT	26
+#define SFAFSR_LDP		(_AC(1,UL) << SFAFSR_LDP_SHIFT)
+#define SFAFSR_LDP_SHIFT	25
+#define SFAFSR_CP		(_AC(1,UL) << SFAFSR_CP_SHIFT)
+#define SFAFSR_CP_SHIFT		24
+#define SFAFSR_WP		(_AC(1,UL) << SFAFSR_WP_SHIFT)
+#define SFAFSR_WP_SHIFT		23
+#define SFAFSR_EDP		(_AC(1,UL) << SFAFSR_EDP_SHIFT)
+#define SFAFSR_EDP_SHIFT	22
+#define SFAFSR_UE		(_AC(1,UL) << SFAFSR_UE_SHIFT)
+#define SFAFSR_UE_SHIFT		21
+#define SFAFSR_CE		(_AC(1,UL) << SFAFSR_CE_SHIFT)
+#define SFAFSR_CE_SHIFT		20
+#define SFAFSR_ETS		(_AC(0xf,UL) << SFAFSR_ETS_SHIFT)
+#define SFAFSR_ETS_SHIFT	16
+#define SFAFSR_PSYND		(_AC(0xffff,UL) << SFAFSR_PSYND_SHIFT)
+#define SFAFSR_PSYND_SHIFT	0
+
+/* UDB Error Register, ASI=0x7f VA<63:0>=0x0(High),0x18(Low) for read
+ *                     ASI=0x77 VA<63:0>=0x0(High),0x18(Low) for write
+ */
+
+#define UDBE_UE			(_AC(1,UL) << 9)
+#define UDBE_CE			(_AC(1,UL) << 8)
+#define UDBE_E_SYNDR		(_AC(0xff,UL) << 0)
+
+/* The trap handlers for asynchronous errors encode the AFSR and
+ * other pieces of information into a 64-bit argument for C code
+ * encoded as follows:
+ *
+ * -----------------------------------------------
+ * |  UDB_H  |  UDB_L  | TL>1  |  TT  |   AFSR   |
+ * -----------------------------------------------
+ *  63     54 53     44    42   41  33 32       0
+ *
+ * The AFAR is passed in unchanged.
+ */
+#define SFSTAT_UDBH_MASK	(_AC(0x3ff,UL) << SFSTAT_UDBH_SHIFT)
+#define SFSTAT_UDBH_SHIFT	54
+#define SFSTAT_UDBL_MASK	(_AC(0x3ff,UL) << SFSTAT_UDBH_SHIFT)
+#define SFSTAT_UDBL_SHIFT	44
+#define SFSTAT_TL_GT_ONE	(_AC(1,UL) << SFSTAT_TL_GT_ONE_SHIFT)
+#define SFSTAT_TL_GT_ONE_SHIFT	42
+#define SFSTAT_TRAP_TYPE	(_AC(0x1FF,UL) << SFSTAT_TRAP_TYPE_SHIFT)
+#define SFSTAT_TRAP_TYPE_SHIFT	33
+#define SFSTAT_AFSR_MASK	(_AC(0x1ffffffff,UL) << SFSTAT_AFSR_SHIFT)
+#define SFSTAT_AFSR_SHIFT	0
+
+/* ESTATE Error Enable Register, ASI=0x4b VA<63:0>=0x0 */
+#define ESTATE_ERR_CE		0x1 /* Correctable errors                    */
+#define ESTATE_ERR_NCE		0x2 /* TO, BERR, LDP, ETP, EDP, WP, UE, IVUE */
+#define ESTATE_ERR_ISAP		0x4 /* System address parity error           */
+#define ESTATE_ERR_ALL		(ESTATE_ERR_CE | \
+				 ESTATE_ERR_NCE | \
+				 ESTATE_ERR_ISAP)
+
+/* The various trap types that report using the above state. */
+#define TRAP_TYPE_IAE		0x09 /* Instruction Access Error             */
+#define TRAP_TYPE_DAE		0x32 /* Data Access Error                    */
+#define TRAP_TYPE_CEE		0x63 /* Correctable ECC Error                */
+
+#endif /* _SPARC64_SFAFSR_H */
diff --git a/arch/sparc/include/asm/sfp-machine.h b/arch/sparc/include/asm/sfp-machine.h
new file mode 100644
index 0000000..4ebc382
--- /dev/null
+++ b/arch/sparc/include/asm/sfp-machine.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SFP_MACHINE_H
+#define ___ASM_SPARC_SFP_MACHINE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/sfp-machine_64.h>
+#else
+#include <asm/sfp-machine_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/sfp-machine_32.h b/arch/sparc/include/asm/sfp-machine_32.h
new file mode 100644
index 0000000..01d9c3b
--- /dev/null
+++ b/arch/sparc/include/asm/sfp-machine_32.h
@@ -0,0 +1,212 @@
+/* Machine-dependent software floating-point definitions.
+   Sparc userland (_Q_*) version.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef _SFP_MACHINE_H
+#define _SFP_MACHINE_H
+
+
+#define _FP_W_TYPE_SIZE		32
+#define _FP_W_TYPE		unsigned long
+#define _FP_WS_TYPE		signed long
+#define _FP_I_TYPE		long
+
+#define _FP_MUL_MEAT_S(R,X,Y)					\
+  _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_D(R,X,Y)					\
+  _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_Q(R,X,Y)					\
+  _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
+
+#define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_udiv(S,R,X,Y)
+#define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_2_udiv(D,R,X,Y)
+#define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_4_udiv(Q,R,X,Y)
+
+#define _FP_NANFRAC_S		((_FP_QNANBIT_S << 1) - 1)
+#define _FP_NANFRAC_D		((_FP_QNANBIT_D << 1) - 1), -1
+#define _FP_NANFRAC_Q		((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1
+#define _FP_NANSIGN_S		0
+#define _FP_NANSIGN_D		0
+#define _FP_NANSIGN_Q		0
+
+#define _FP_KEEPNANFRACP 1
+
+/* If one NaN is signaling and the other is not,
+ * we choose that one, otherwise we choose X.
+ */
+/* For _Qp_* and _Q_*, this should prefer X, for
+ * CPU instruction emulation this should prefer Y.
+ * (see SPAMv9 B.2.2 section).
+ */
+#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)			\
+  do {								\
+    if ((_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)		\
+	&& !(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs))	\
+      {								\
+	R##_s = X##_s;						\
+	_FP_FRAC_COPY_##wc(R,X);				\
+      }								\
+    else							\
+      {								\
+	R##_s = Y##_s;						\
+	_FP_FRAC_COPY_##wc(R,Y);				\
+      }								\
+    R##_c = FP_CLS_NAN;						\
+  } while (0)
+
+/* Some assembly to speed things up. */
+#define __FP_FRAC_ADD_3(r2,r1,r0,x2,x1,x0,y2,y1,y0)			\
+  __asm__ ("addcc %r7,%8,%2\n\t"					\
+	   "addxcc %r5,%6,%1\n\t"					\
+	   "addx %r3,%4,%0\n"						\
+	   : "=r" ((USItype)(r2)),					\
+	     "=&r" ((USItype)(r1)),					\
+	     "=&r" ((USItype)(r0))					\
+	   : "%rJ" ((USItype)(x2)),					\
+	     "rI" ((USItype)(y2)),					\
+	     "%rJ" ((USItype)(x1)),					\
+	     "rI" ((USItype)(y1)),					\
+	     "%rJ" ((USItype)(x0)),					\
+	     "rI" ((USItype)(y0))					\
+	   : "cc")
+
+#define __FP_FRAC_SUB_3(r2,r1,r0,x2,x1,x0,y2,y1,y0)			\
+  __asm__ ("subcc %r7,%8,%2\n\t"					\
+	    "subxcc %r5,%6,%1\n\t"					\
+	    "subx %r3,%4,%0\n"						\
+	   : "=r" ((USItype)(r2)),					\
+	     "=&r" ((USItype)(r1)),					\
+	     "=&r" ((USItype)(r0))					\
+	   : "%rJ" ((USItype)(x2)),					\
+	     "rI" ((USItype)(y2)),					\
+	     "%rJ" ((USItype)(x1)),					\
+	     "rI" ((USItype)(y1)),					\
+	     "%rJ" ((USItype)(x0)),					\
+	     "rI" ((USItype)(y0))					\
+	   : "cc")
+
+#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0)		\
+  do {									\
+    /* We need to fool gcc,  as we need to pass more than 10		\
+       input/outputs.  */						\
+    register USItype _t1 __asm__ ("g1"), _t2 __asm__ ("g2");		\
+    __asm__ __volatile__ (						\
+	    "addcc %r8,%9,%1\n\t"					\
+	    "addxcc %r6,%7,%0\n\t"					\
+	    "addxcc %r4,%5,%%g2\n\t"					\
+	    "addx %r2,%3,%%g1\n\t"					\
+	   : "=&r" ((USItype)(r1)),					\
+	     "=&r" ((USItype)(r0))					\
+	   : "%rJ" ((USItype)(x3)),					\
+	     "rI" ((USItype)(y3)),					\
+	     "%rJ" ((USItype)(x2)),					\
+	     "rI" ((USItype)(y2)),					\
+	     "%rJ" ((USItype)(x1)),					\
+	     "rI" ((USItype)(y1)),					\
+	     "%rJ" ((USItype)(x0)),					\
+	     "rI" ((USItype)(y0))					\
+	   : "cc", "g1", "g2");						\
+    __asm__ __volatile__ ("" : "=r" (_t1), "=r" (_t2));			\
+    r3 = _t1; r2 = _t2;							\
+  } while (0)
+
+#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0)		\
+  do {									\
+    /* We need to fool gcc,  as we need to pass more than 10		\
+       input/outputs.  */						\
+    register USItype _t1 __asm__ ("g1"), _t2 __asm__ ("g2");		\
+    __asm__ __volatile__ (						\
+	    "subcc %r8,%9,%1\n\t"					\
+	    "subxcc %r6,%7,%0\n\t"					\
+	    "subxcc %r4,%5,%%g2\n\t"					\
+	    "subx %r2,%3,%%g1\n\t"					\
+	   : "=&r" ((USItype)(r1)),					\
+	     "=&r" ((USItype)(r0))					\
+	   : "%rJ" ((USItype)(x3)),					\
+	     "rI" ((USItype)(y3)),					\
+	     "%rJ" ((USItype)(x2)),					\
+	     "rI" ((USItype)(y2)),					\
+	     "%rJ" ((USItype)(x1)),					\
+	     "rI" ((USItype)(y1)),					\
+	     "%rJ" ((USItype)(x0)),					\
+	     "rI" ((USItype)(y0))					\
+	   : "cc", "g1", "g2");						\
+    __asm__ __volatile__ ("" : "=r" (_t1), "=r" (_t2));			\
+    r3 = _t1; r2 = _t2;							\
+  } while (0)
+
+#define __FP_FRAC_DEC_3(x2,x1,x0,y2,y1,y0) __FP_FRAC_SUB_3(x2,x1,x0,x2,x1,x0,y2,y1,y0)
+
+#define __FP_FRAC_DEC_4(x3,x2,x1,x0,y3,y2,y1,y0) __FP_FRAC_SUB_4(x3,x2,x1,x0,x3,x2,x1,x0,y3,y2,y1,y0)
+
+#define __FP_FRAC_ADDI_4(x3,x2,x1,x0,i)					\
+  __asm__ ("addcc %3,%4,%3\n\t"						\
+	   "addxcc %2,%%g0,%2\n\t"					\
+	   "addxcc %1,%%g0,%1\n\t"					\
+	   "addx %0,%%g0,%0\n\t"					\
+	   : "=&r" ((USItype)(x3)),					\
+	     "=&r" ((USItype)(x2)),					\
+	     "=&r" ((USItype)(x1)),					\
+	     "=&r" ((USItype)(x0))					\
+	   : "rI" ((USItype)(i)),					\
+	     "0" ((USItype)(x3)),					\
+	     "1" ((USItype)(x2)),					\
+	     "2" ((USItype)(x1)),					\
+	     "3" ((USItype)(x0))					\
+	   : "cc")
+
+#ifndef CONFIG_SMP
+extern struct task_struct *last_task_used_math;
+#endif
+
+/* Obtain the current rounding mode. */
+#ifndef FP_ROUNDMODE
+#ifdef CONFIG_SMP
+#define FP_ROUNDMODE	((current->thread.fsr >> 30) & 0x3)
+#else
+#define FP_ROUNDMODE	((last_task_used_math->thread.fsr >> 30) & 0x3)
+#endif
+#endif
+
+/* Exception flags. */
+#define FP_EX_INVALID		(1 << 4)
+#define FP_EX_OVERFLOW		(1 << 3)
+#define FP_EX_UNDERFLOW		(1 << 2)
+#define FP_EX_DIVZERO		(1 << 1)
+#define FP_EX_INEXACT		(1 << 0)
+
+#define FP_HANDLE_EXCEPTIONS return _fex
+
+#ifdef CONFIG_SMP
+#define FP_INHIBIT_RESULTS ((current->thread.fsr >> 23) & _fex)
+#else
+#define FP_INHIBIT_RESULTS ((last_task_used_math->thread.fsr >> 23) & _fex)
+#endif
+
+#ifdef CONFIG_SMP
+#define FP_TRAPPING_EXCEPTIONS ((current->thread.fsr >> 23) & 0x1f)
+#else
+#define FP_TRAPPING_EXCEPTIONS ((last_task_used_math->thread.fsr >> 23) & 0x1f)
+#endif
+
+#endif
diff --git a/arch/sparc/include/asm/sfp-machine_64.h b/arch/sparc/include/asm/sfp-machine_64.h
new file mode 100644
index 0000000..ca913ef
--- /dev/null
+++ b/arch/sparc/include/asm/sfp-machine_64.h
@@ -0,0 +1,93 @@
+/* Machine-dependent software floating-point definitions.
+   Sparc64 kernel version.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz) and
+		  David S. Miller (davem@redhat.com).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef _SFP_MACHINE_H
+#define _SFP_MACHINE_H
+
+#define _FP_W_TYPE_SIZE		64
+#define _FP_W_TYPE		unsigned long
+#define _FP_WS_TYPE		signed long
+#define _FP_I_TYPE		long
+
+#define _FP_MUL_MEAT_S(R,X,Y)					\
+  _FP_MUL_MEAT_1_imm(_FP_WFRACBITS_S,R,X,Y)
+#define _FP_MUL_MEAT_D(R,X,Y)					\
+  _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_Q(R,X,Y)					\
+  _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
+
+#define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_imm(S,R,X,Y,_FP_DIV_HELP_imm)
+#define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_1_udiv_norm(D,R,X,Y)
+#define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_2_udiv(Q,R,X,Y)
+
+#define _FP_NANFRAC_S		((_FP_QNANBIT_S << 1) - 1)
+#define _FP_NANFRAC_D		((_FP_QNANBIT_D << 1) - 1)
+#define _FP_NANFRAC_Q		((_FP_QNANBIT_Q << 1) - 1), -1
+#define _FP_NANSIGN_S		0
+#define _FP_NANSIGN_D		0
+#define _FP_NANSIGN_Q		0
+
+#define _FP_KEEPNANFRACP 1
+
+/* If one NaN is signaling and the other is not,
+ * we choose that one, otherwise we choose X.
+ */
+/* For _Qp_* and _Q_*, this should prefer X, for
+ * CPU instruction emulation this should prefer Y.
+ * (see SPAMv9 B.2.2 section).
+ */
+#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)			\
+  do {								\
+    if ((_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)		\
+	&& !(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs))	\
+      {								\
+	R##_s = X##_s;						\
+	_FP_FRAC_COPY_##wc(R,X);				\
+      }								\
+    else							\
+      {								\
+	R##_s = Y##_s;						\
+	_FP_FRAC_COPY_##wc(R,Y);				\
+      }								\
+    R##_c = FP_CLS_NAN;						\
+  } while (0)
+
+/* Obtain the current rounding mode. */
+#ifndef FP_ROUNDMODE
+#define FP_ROUNDMODE	((current_thread_info()->xfsr[0] >> 30) & 0x3)
+#endif
+
+/* Exception flags. */
+#define FP_EX_INVALID		(1 << 4)
+#define FP_EX_OVERFLOW		(1 << 3)
+#define FP_EX_UNDERFLOW		(1 << 2)
+#define FP_EX_DIVZERO		(1 << 1)
+#define FP_EX_INEXACT		(1 << 0)
+
+#define FP_HANDLE_EXCEPTIONS return _fex
+
+#define FP_INHIBIT_RESULTS ((current_thread_info()->xfsr[0] >> 23) & _fex)
+
+#define FP_TRAPPING_EXCEPTIONS ((current_thread_info()->xfsr[0] >> 23) & 0x1f)
+
+#endif
diff --git a/arch/sparc/include/asm/shmbuf.h b/arch/sparc/include/asm/shmbuf.h
new file mode 100644
index 0000000..83a1605
--- /dev/null
+++ b/arch/sparc/include/asm/shmbuf.h
@@ -0,0 +1,50 @@
+#ifndef _SPARC_SHMBUF_H
+#define _SPARC_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for sparc architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+#if defined(__sparc__) && defined(__arch64__)
+# define PADDING(x)
+#else
+# define PADDING(x) unsigned int x;
+#endif
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	PADDING(__pad1)
+	__kernel_time_t		shm_atime;	/* last attach time */
+	PADDING(__pad2)
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	PADDING(__pad3)
+	__kernel_time_t		shm_ctime;	/* last change time */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#undef PADDING
+
+#endif /* _SPARC_SHMBUF_H */
diff --git a/arch/sparc/include/asm/shmparam.h b/arch/sparc/include/asm/shmparam.h
new file mode 100644
index 0000000..8bf0cfe
--- /dev/null
+++ b/arch/sparc/include/asm/shmparam.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SHMPARAM_H
+#define ___ASM_SPARC_SHMPARAM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/shmparam_64.h>
+#else
+#include <asm/shmparam_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/shmparam_32.h b/arch/sparc/include/asm/shmparam_32.h
new file mode 100644
index 0000000..59a1243
--- /dev/null
+++ b/arch/sparc/include/asm/shmparam_32.h
@@ -0,0 +1,11 @@
+#ifndef _ASMSPARC_SHMPARAM_H
+#define _ASMSPARC_SHMPARAM_H
+
+#define __ARCH_FORCE_SHMLBA 	1
+
+extern int vac_cache_size;
+#define SHMLBA (vac_cache_size ? vac_cache_size : \
+		(sparc_cpu_model == sun4c ? (64 * 1024) : \
+		 (sparc_cpu_model == sun4 ? (128 * 1024) : PAGE_SIZE)))
+
+#endif /* _ASMSPARC_SHMPARAM_H */
diff --git a/arch/sparc/include/asm/shmparam_64.h b/arch/sparc/include/asm/shmparam_64.h
new file mode 100644
index 0000000..1ed0d67
--- /dev/null
+++ b/arch/sparc/include/asm/shmparam_64.h
@@ -0,0 +1,10 @@
+#ifndef _ASMSPARC64_SHMPARAM_H
+#define _ASMSPARC64_SHMPARAM_H
+
+#include <asm/spitfire.h>
+
+#define __ARCH_FORCE_SHMLBA	1
+/* attach addr a multiple of this */
+#define	SHMLBA	((PAGE_SIZE > L1DCACHE_SIZE) ? PAGE_SIZE : L1DCACHE_SIZE)
+
+#endif /* _ASMSPARC64_SHMPARAM_H */
diff --git a/arch/sparc/include/asm/sigcontext.h b/arch/sparc/include/asm/sigcontext.h
new file mode 100644
index 0000000..e92de7e
--- /dev/null
+++ b/arch/sparc/include/asm/sigcontext.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SIGCONTEXT_H
+#define ___ASM_SPARC_SIGCONTEXT_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/sigcontext_64.h>
+#else
+#include <asm/sigcontext_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/sigcontext_32.h b/arch/sparc/include/asm/sigcontext_32.h
new file mode 100644
index 0000000..c5fb60d
--- /dev/null
+++ b/arch/sparc/include/asm/sigcontext_32.h
@@ -0,0 +1,62 @@
+#ifndef __SPARC_SIGCONTEXT_H
+#define __SPARC_SIGCONTEXT_H
+
+#ifdef __KERNEL__
+#include <asm/ptrace.h>
+
+#ifndef __ASSEMBLY__
+
+#define __SUNOS_MAXWIN   31
+
+/* This is what SunOS does, so shall I. */
+struct sigcontext {
+	int sigc_onstack;      /* state to restore */
+	int sigc_mask;         /* sigmask to restore */
+	int sigc_sp;           /* stack pointer */
+	int sigc_pc;           /* program counter */
+	int sigc_npc;          /* next program counter */
+	int sigc_psr;          /* for condition codes etc */
+	int sigc_g1;           /* User uses these two registers */
+	int sigc_o0;           /* within the trampoline code. */
+
+	/* Now comes information regarding the users window set
+	 * at the time of the signal.
+	 */
+	int sigc_oswins;       /* outstanding windows */
+
+	/* stack ptrs for each regwin buf */
+	char *sigc_spbuf[__SUNOS_MAXWIN];
+
+	/* Windows to restore after signal */
+	struct {
+		unsigned long	locals[8];
+		unsigned long	ins[8];
+	} sigc_wbuf[__SUNOS_MAXWIN];
+};
+
+typedef struct {
+	struct {
+		unsigned long psr;
+		unsigned long pc;
+		unsigned long npc;
+		unsigned long y;
+		unsigned long u_regs[16]; /* globals and ins */
+	}		si_regs;
+	int		si_mask;
+} __siginfo_t;
+
+typedef struct {
+	unsigned   long si_float_regs [32];
+	unsigned   long si_fsr;
+	unsigned   long si_fpqdepth;
+	struct {
+		unsigned long *insn_addr;
+		unsigned long insn;
+	} si_fpqueue [16];
+} __siginfo_fpu_t;
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* (__KERNEL__) */
+
+#endif /* !(__SPARC_SIGCONTEXT_H) */
diff --git a/arch/sparc/include/asm/sigcontext_64.h b/arch/sparc/include/asm/sigcontext_64.h
new file mode 100644
index 0000000..1c868d6
--- /dev/null
+++ b/arch/sparc/include/asm/sigcontext_64.h
@@ -0,0 +1,87 @@
+#ifndef __SPARC64_SIGCONTEXT_H
+#define __SPARC64_SIGCONTEXT_H
+
+#ifdef __KERNEL__
+#include <asm/ptrace.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+#ifdef __KERNEL__
+
+#define __SUNOS_MAXWIN   31
+
+/* This is what SunOS does, so shall I unless we use new 32bit signals or rt signals. */
+struct sigcontext32 {
+	int sigc_onstack;      /* state to restore */
+	int sigc_mask;         /* sigmask to restore */
+	int sigc_sp;           /* stack pointer */
+	int sigc_pc;           /* program counter */
+	int sigc_npc;          /* next program counter */
+	int sigc_psr;          /* for condition codes etc */
+	int sigc_g1;           /* User uses these two registers */
+	int sigc_o0;           /* within the trampoline code. */
+
+	/* Now comes information regarding the users window set
+	 * at the time of the signal.
+	 */
+	int sigc_oswins;       /* outstanding windows */
+
+	/* stack ptrs for each regwin buf */
+	unsigned sigc_spbuf[__SUNOS_MAXWIN];
+
+	/* Windows to restore after signal */
+	struct reg_window32 sigc_wbuf[__SUNOS_MAXWIN];
+};
+
+#endif
+
+#ifdef __KERNEL__
+
+/* This is what we use for 32bit new non-rt signals. */
+
+typedef struct {
+	struct {
+		unsigned int psr;
+		unsigned int pc;
+		unsigned int npc;
+		unsigned int y;
+		unsigned int u_regs[16]; /* globals and ins */
+	}			si_regs;
+	int			si_mask;
+} __siginfo32_t;
+
+#endif
+
+typedef struct {
+	unsigned   int si_float_regs [64];
+	unsigned   long si_fsr;
+	unsigned   long si_gsr;
+	unsigned   long si_fprs;
+} __siginfo_fpu_t;
+
+/* This is what SunOS doesn't, so we have to write this alone
+   and do it properly. */
+struct sigcontext {
+	/* The size of this array has to match SI_MAX_SIZE from siginfo.h */
+	char			sigc_info[128];
+	struct {
+		unsigned long	u_regs[16]; /* globals and ins */
+		unsigned long	tstate;
+		unsigned long	tpc;
+		unsigned long	tnpc;
+		unsigned int	y;
+		unsigned int	fprs;
+	}			sigc_regs;
+	__siginfo_fpu_t *	sigc_fpu_save;
+	struct {
+		void	*	ss_sp;
+		int		ss_flags;
+		unsigned long	ss_size;
+	}			sigc_stack;
+	unsigned long		sigc_mask;
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC64_SIGCONTEXT_H) */
diff --git a/arch/sparc/include/asm/siginfo.h b/arch/sparc/include/asm/siginfo.h
new file mode 100644
index 0000000..bd81f8d
--- /dev/null
+++ b/arch/sparc/include/asm/siginfo.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SIGINFO_H
+#define ___ASM_SPARC_SIGINFO_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/siginfo_64.h>
+#else
+#include <asm/siginfo_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/siginfo_32.h b/arch/sparc/include/asm/siginfo_32.h
new file mode 100644
index 0000000..3c71af1
--- /dev/null
+++ b/arch/sparc/include/asm/siginfo_32.h
@@ -0,0 +1,17 @@
+#ifndef _SPARC_SIGINFO_H
+#define _SPARC_SIGINFO_H
+
+#define __ARCH_SI_UID_T		unsigned int
+#define __ARCH_SI_TRAPNO
+
+#include <asm-generic/siginfo.h>
+
+#define SI_NOINFO	32767		/* no information in siginfo_t */
+
+/*
+ * SIGEMT si_codes
+ */
+#define EMT_TAGOVF	(__SI_FAULT|1)	/* tag overflow */
+#define NSIGEMT		1
+
+#endif /* !(_SPARC_SIGINFO_H) */
diff --git a/arch/sparc/include/asm/siginfo_64.h b/arch/sparc/include/asm/siginfo_64.h
new file mode 100644
index 0000000..c96e6c3
--- /dev/null
+++ b/arch/sparc/include/asm/siginfo_64.h
@@ -0,0 +1,32 @@
+#ifndef _SPARC64_SIGINFO_H
+#define _SPARC64_SIGINFO_H
+
+#define SI_PAD_SIZE32	((SI_MAX_SIZE/sizeof(int)) - 3)
+
+#define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
+#define __ARCH_SI_TRAPNO
+#define __ARCH_SI_BAND_T int
+
+#include <asm-generic/siginfo.h>
+
+#ifdef __KERNEL__
+
+#include <linux/compat.h>
+
+#ifdef CONFIG_COMPAT
+
+struct compat_siginfo;
+
+#endif /* CONFIG_COMPAT */
+
+#endif /* __KERNEL__ */
+
+#define SI_NOINFO	32767		/* no information in siginfo_t */
+
+/*
+ * SIGEMT si_codes
+ */
+#define EMT_TAGOVF	(__SI_FAULT|1)	/* tag overflow */
+#define NSIGEMT		1
+
+#endif
diff --git a/arch/sparc/include/asm/signal.h b/arch/sparc/include/asm/signal.h
new file mode 100644
index 0000000..27ab05d
--- /dev/null
+++ b/arch/sparc/include/asm/signal.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SIGNAL_H
+#define ___ASM_SPARC_SIGNAL_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/signal_64.h>
+#else
+#include <asm/signal_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/signal_32.h b/arch/sparc/include/asm/signal_32.h
new file mode 100644
index 0000000..96a60ab
--- /dev/null
+++ b/arch/sparc/include/asm/signal_32.h
@@ -0,0 +1,207 @@
+#ifndef _ASMSPARC_SIGNAL_H
+#define _ASMSPARC_SIGNAL_H
+
+#include <asm/sigcontext.h>
+#include <linux/compiler.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#include <linux/personality.h>
+#include <linux/types.h>
+#endif
+#endif
+
+/* On the Sparc the signal handlers get passed a 'sub-signal' code
+ * for certain signal types, which we document here.
+ */
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define    SUBSIG_STACK       0
+#define    SUBSIG_ILLINST     2
+#define    SUBSIG_PRIVINST    3
+#define    SUBSIG_BADTRAP(t)  (0x80 + (t))
+
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+
+#define SIGEMT           7
+#define    SUBSIG_TAG    10
+
+#define SIGFPE		 8
+#define    SUBSIG_FPDISABLED     0x400
+#define    SUBSIG_FPERROR        0x404
+#define    SUBSIG_FPINTOVFL      0x001
+#define    SUBSIG_FPSTSIG        0x002
+#define    SUBSIG_IDIVZERO       0x014
+#define    SUBSIG_FPINEXACT      0x0c4
+#define    SUBSIG_FPDIVZERO      0x0c8
+#define    SUBSIG_FPUNFLOW       0x0cc
+#define    SUBSIG_FPOPERROR      0x0d0
+#define    SUBSIG_FPOVFLOW       0x0d4
+
+#define SIGKILL		 9
+#define SIGBUS          10
+#define    SUBSIG_BUSTIMEOUT    1
+#define    SUBSIG_ALIGNMENT     2
+#define    SUBSIG_MISCERROR     5
+
+#define SIGSEGV		11
+#define    SUBSIG_NOMAPPING     3
+#define    SUBSIG_PROTECTION    4
+#define    SUBSIG_SEGERROR      5
+
+#define SIGSYS		12
+
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGURG          16
+
+/* SunOS values which deviate from the Linux/i386 ones */
+#define SIGSTOP		17
+#define SIGTSTP		18
+#define SIGCONT		19
+#define SIGCHLD		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGIO		23
+#define SIGPOLL		SIGIO   /* SysV name for SIGIO */
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGLOST		29
+#define SIGPWR		SIGLOST
+#define SIGUSR1		30
+#define SIGUSR2		31
+
+/* Most things should be clean enough to redefine this at will, if care
+ * is taken to make libc match.
+ */
+
+#define __OLD_NSIG	32
+#define __NEW_NSIG	64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(__NEW_NSIG / _NSIG_BPW)
+
+#define SIGRTMIN	32
+#define SIGRTMAX	__NEW_NSIG
+
+#if defined(__KERNEL__) || defined(__WANT_POSIX1B_SIGNALS__)
+#define	_NSIG		__NEW_NSIG
+#define __new_sigset_t	sigset_t
+#define __new_sigaction	sigaction
+#define __old_sigset_t	old_sigset_t
+#define __old_sigaction	old_sigaction
+#else
+#define _NSIG		__OLD_NSIG
+#define __old_sigset_t	sigset_t
+#define __old_sigaction	sigaction
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long __old_sigset_t;
+
+typedef struct {
+	unsigned long	sig[_NSIG_WORDS];
+} __new_sigset_t;
+
+
+#ifdef __KERNEL__
+/* A SunOS sigstack */
+struct sigstack {
+	char *the_stack;
+	int   cur_status;
+};
+#endif
+
+/* Sigvec flags */
+#define _SV_SSTACK    1u    /* This signal handler should use sig-stack */
+#define _SV_INTR      2u    /* Sig return should not restart system call */
+#define _SV_RESET     4u    /* Set handler to SIG_DFL upon taken signal */
+#define _SV_IGNCHILD  8u    /* Do not send SIGCHLD */
+
+/*
+ * sa_flags values: SA_STACK is not currently supported, but will allow the
+ * usage of signal stacks by using the (now obsolete) sa_restorer field in
+ * the sigaction structure as a stack pointer. This is now possible due to
+ * the changes in signal handling. LBT 010493.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ */
+#define SA_NOCLDSTOP	_SV_IGNCHILD
+#define SA_STACK	_SV_SSTACK
+#define SA_ONSTACK	_SV_SSTACK
+#define SA_RESTART	_SV_INTR
+#define SA_ONESHOT	_SV_RESET
+#define SA_NOMASK	0x20u
+#define SA_NOCLDWAIT	0x100u
+#define SA_SIGINFO	0x200u
+
+#define SIG_BLOCK          0x01	/* for blocking signals */
+#define SIG_UNBLOCK        0x02	/* for unblocking signals */
+#define SIG_SETMASK        0x04	/* for setting the signal mask */
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	4096
+#define SIGSTKSZ	16384
+
+#ifdef __KERNEL__
+/*
+ * DJHR
+ * SA_STATIC_ALLOC is used for the SPARC system to indicate that this
+ * interrupt handler's irq structure should be statically allocated
+ * by the request_irq routine.
+ * The alternative is that arch/sparc/kernel/irq.c has carnal knowledge
+ * of interrupt usage and that sucks. Also without a flag like this
+ * it may be possible for the free_irq routine to attempt to free
+ * statically allocated data.. which is NOT GOOD.
+ *
+ */
+#define SA_STATIC_ALLOC		0x8000
+#endif
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct __new_sigaction {
+	__sighandler_t	sa_handler;
+	unsigned long	sa_flags;
+	void		(*sa_restorer)(void);	/* Not used by Linux/SPARC */
+	__new_sigset_t	sa_mask;
+};
+
+struct k_sigaction {
+	struct __new_sigaction	sa;
+	void			__user *ka_restorer;
+};
+
+struct __old_sigaction {
+	__sighandler_t	sa_handler;
+	__old_sigset_t	sa_mask;
+	unsigned long	sa_flags;
+	void		(*sa_restorer) (void);	/* not used by Linux/SPARC */
+};
+
+typedef struct sigaltstack {
+	void		__user *ss_sp;
+	int		ss_flags;
+	size_t		ss_size;
+} stack_t;
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_ASMSPARC_SIGNAL_H) */
diff --git a/arch/sparc/include/asm/signal_64.h b/arch/sparc/include/asm/signal_64.h
new file mode 100644
index 0000000..ab1509a
--- /dev/null
+++ b/arch/sparc/include/asm/signal_64.h
@@ -0,0 +1,194 @@
+#ifndef _ASMSPARC64_SIGNAL_H
+#define _ASMSPARC64_SIGNAL_H
+
+#include <asm/sigcontext.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#include <linux/personality.h>
+#include <linux/types.h>
+#endif
+#endif
+
+/* On the Sparc the signal handlers get passed a 'sub-signal' code
+ * for certain signal types, which we document here.
+ */
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define    SUBSIG_STACK       0
+#define    SUBSIG_ILLINST     2
+#define    SUBSIG_PRIVINST    3
+#define    SUBSIG_BADTRAP(t)  (0x80 + (t))
+
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+
+#define SIGEMT           7
+#define    SUBSIG_TAG    10
+
+#define SIGFPE		 8
+#define    SUBSIG_FPDISABLED     0x400
+#define    SUBSIG_FPERROR        0x404
+#define    SUBSIG_FPINTOVFL      0x001
+#define    SUBSIG_FPSTSIG        0x002
+#define    SUBSIG_IDIVZERO       0x014
+#define    SUBSIG_FPINEXACT      0x0c4
+#define    SUBSIG_FPDIVZERO      0x0c8
+#define    SUBSIG_FPUNFLOW       0x0cc
+#define    SUBSIG_FPOPERROR      0x0d0
+#define    SUBSIG_FPOVFLOW       0x0d4
+
+#define SIGKILL		 9
+#define SIGBUS          10
+#define    SUBSIG_BUSTIMEOUT    1
+#define    SUBSIG_ALIGNMENT     2
+#define    SUBSIG_MISCERROR     5
+
+#define SIGSEGV		11
+#define    SUBSIG_NOMAPPING     3
+#define    SUBSIG_PROTECTION    4
+#define    SUBSIG_SEGERROR      5
+
+#define SIGSYS		12
+
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGURG          16
+
+/* SunOS values which deviate from the Linux/i386 ones */
+#define SIGSTOP		17
+#define SIGTSTP		18
+#define SIGCONT		19
+#define SIGCHLD		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGIO		23
+#define SIGPOLL		SIGIO   /* SysV name for SIGIO */
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGLOST		29
+#define SIGPWR		SIGLOST
+#define SIGUSR1		30
+#define SIGUSR2		31
+
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define __OLD_NSIG	32
+#define __NEW_NSIG      64
+#define _NSIG_BPW     	64
+#define _NSIG_WORDS   	(__NEW_NSIG / _NSIG_BPW)
+
+#define SIGRTMIN       32
+#define SIGRTMAX       __NEW_NSIG
+
+#if defined(__KERNEL__) || defined(__WANT_POSIX1B_SIGNALS__)
+#define _NSIG			__NEW_NSIG
+#define __new_sigset_t		sigset_t
+#define __new_sigaction		sigaction
+#define __new_sigaction32	sigaction32
+#define __old_sigset_t		old_sigset_t
+#define __old_sigaction		old_sigaction
+#define __old_sigaction32	old_sigaction32
+#else
+#define _NSIG			__OLD_NSIG
+#define NSIG			_NSIG
+#define __old_sigset_t		sigset_t
+#define __old_sigaction		sigaction
+#define __old_sigaction32	sigaction32
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long __old_sigset_t;            /* at least 32 bits */
+
+typedef struct {
+       unsigned long sig[_NSIG_WORDS];
+} __new_sigset_t;
+
+/* A SunOS sigstack */
+struct sigstack {
+	/* XXX 32-bit pointers pinhead XXX */
+	char *the_stack;
+	int   cur_status;
+};
+
+/* Sigvec flags */
+#define _SV_SSTACK    1u    /* This signal handler should use sig-stack */
+#define _SV_INTR      2u    /* Sig return should not restart system call */
+#define _SV_RESET     4u    /* Set handler to SIG_DFL upon taken signal */
+#define _SV_IGNCHILD  8u    /* Do not send SIGCHLD */
+
+/*
+ * sa_flags values: SA_STACK is not currently supported, but will allow the
+ * usage of signal stacks by using the (now obsolete) sa_restorer field in
+ * the sigaction structure as a stack pointer. This is now possible due to
+ * the changes in signal handling. LBT 010493.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ */
+#define SA_NOCLDSTOP	_SV_IGNCHILD
+#define SA_STACK	_SV_SSTACK
+#define SA_ONSTACK	_SV_SSTACK
+#define SA_RESTART	_SV_INTR
+#define SA_ONESHOT	_SV_RESET
+#define SA_NOMASK	0x20u
+#define SA_NOCLDWAIT    0x100u
+#define SA_SIGINFO      0x200u
+
+
+#define SIG_BLOCK          0x01	/* for blocking signals */
+#define SIG_UNBLOCK        0x02	/* for unblocking signals */
+#define SIG_SETMASK        0x04	/* for setting the signal mask */
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	4096
+#define SIGSTKSZ	16384
+
+#include <asm-generic/signal.h>
+
+struct __new_sigaction {
+	__sighandler_t		sa_handler;
+	unsigned long		sa_flags;
+	__sigrestore_t 		sa_restorer;  /* not used by Linux/SPARC yet */
+	__new_sigset_t		sa_mask;
+};
+
+struct __old_sigaction {
+	__sighandler_t  	sa_handler;
+	__old_sigset_t  	sa_mask;
+	unsigned long   	sa_flags;
+	void 			(*sa_restorer)(void);     /* not used by Linux/SPARC yet */
+};
+
+typedef struct sigaltstack {
+	void			__user *ss_sp;
+	int			ss_flags;
+	size_t			ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+struct k_sigaction {
+	struct __new_sigaction 	sa;
+	void __user		*ka_restorer;
+};
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_ASMSPARC64_SIGNAL_H) */
diff --git a/arch/sparc/include/asm/smp.h b/arch/sparc/include/asm/smp.h
new file mode 100644
index 0000000..b59672d
--- /dev/null
+++ b/arch/sparc/include/asm/smp.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SMP_H
+#define ___ASM_SPARC_SMP_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/smp_64.h>
+#else
+#include <asm/smp_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/smp_32.h b/arch/sparc/include/asm/smp_32.h
new file mode 100644
index 0000000..7201752
--- /dev/null
+++ b/arch/sparc/include/asm/smp_32.h
@@ -0,0 +1,173 @@
+/* smp.h: Sparc specific SMP stuff.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SMP_H
+#define _SPARC_SMP_H
+
+#include <linux/threads.h>
+#include <asm/head.h>
+#include <asm/btfixup.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/cpumask.h>
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_SMP
+
+#ifndef __ASSEMBLY__
+
+#include <asm/ptrace.h>
+#include <asm/asi.h>
+#include <asm/atomic.h>
+
+/*
+ *	Private routines/data
+ */
+
+extern unsigned char boot_cpu_id;
+extern cpumask_t phys_cpu_present_map;
+#define cpu_possible_map phys_cpu_present_map
+
+typedef void (*smpfunc_t)(unsigned long, unsigned long, unsigned long,
+		       unsigned long, unsigned long);
+
+/*
+ *	General functions that each host system must provide.
+ */
+
+void sun4m_init_smp(void);
+void sun4d_init_smp(void);
+
+void smp_callin(void);
+void smp_boot_cpus(void);
+void smp_store_cpu_info(int);
+
+struct seq_file;
+void smp_bogo(struct seq_file *);
+void smp_info(struct seq_file *);
+
+BTFIXUPDEF_CALL(void, smp_cross_call, smpfunc_t, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(int, __hard_smp_processor_id, void)
+BTFIXUPDEF_BLACKBOX(hard_smp_processor_id)
+BTFIXUPDEF_BLACKBOX(load_current)
+
+#define smp_cross_call(func,arg1,arg2,arg3,arg4,arg5) BTFIXUP_CALL(smp_cross_call)(func,arg1,arg2,arg3,arg4,arg5)
+
+static inline void xc0(smpfunc_t func) { smp_cross_call(func, 0, 0, 0, 0, 0); }
+static inline void xc1(smpfunc_t func, unsigned long arg1)
+{ smp_cross_call(func, arg1, 0, 0, 0, 0); }
+static inline void xc2(smpfunc_t func, unsigned long arg1, unsigned long arg2)
+{ smp_cross_call(func, arg1, arg2, 0, 0, 0); }
+static inline void xc3(smpfunc_t func, unsigned long arg1, unsigned long arg2,
+			   unsigned long arg3)
+{ smp_cross_call(func, arg1, arg2, arg3, 0, 0); }
+static inline void xc4(smpfunc_t func, unsigned long arg1, unsigned long arg2,
+			   unsigned long arg3, unsigned long arg4)
+{ smp_cross_call(func, arg1, arg2, arg3, arg4, 0); }
+static inline void xc5(smpfunc_t func, unsigned long arg1, unsigned long arg2,
+			   unsigned long arg3, unsigned long arg4, unsigned long arg5)
+{ smp_cross_call(func, arg1, arg2, arg3, arg4, arg5); }
+
+static inline int smp_call_function(void (*func)(void *info), void *info, int wait)
+{
+	xc1((smpfunc_t)func, (unsigned long)info);
+	return 0;
+}
+
+static inline int cpu_logical_map(int cpu)
+{
+	return cpu;
+}
+
+static inline int hard_smp4m_processor_id(void)
+{
+	int cpuid;
+
+	__asm__ __volatile__("rd %%tbr, %0\n\t"
+			     "srl %0, 12, %0\n\t"
+			     "and %0, 3, %0\n\t" :
+			     "=&r" (cpuid));
+	return cpuid;
+}
+
+static inline int hard_smp4d_processor_id(void)
+{
+	int cpuid;
+
+	__asm__ __volatile__("lda [%%g0] %1, %0\n\t" :
+			     "=&r" (cpuid) : "i" (ASI_M_VIKING_TMP1));
+	return cpuid;
+}
+
+#ifndef MODULE
+static inline int hard_smp_processor_id(void)
+{
+	int cpuid;
+
+	/* Black box - sun4m
+		__asm__ __volatile__("rd %%tbr, %0\n\t"
+				     "srl %0, 12, %0\n\t"
+				     "and %0, 3, %0\n\t" :
+				     "=&r" (cpuid));
+	             - sun4d
+		__asm__ __volatile__("lda [%g0] ASI_M_VIKING_TMP1, %0\n\t"
+				     "nop; nop" :
+				     "=&r" (cpuid));
+	   See btfixup.h and btfixupprep.c to understand how a blackbox works.
+	 */
+	__asm__ __volatile__("sethi %%hi(___b_hard_smp_processor_id), %0\n\t"
+			     "sethi %%hi(boot_cpu_id), %0\n\t"
+			     "ldub [%0 + %%lo(boot_cpu_id)], %0\n\t" :
+			     "=&r" (cpuid));
+	return cpuid;
+}
+#else
+static inline int hard_smp_processor_id(void)
+{
+	int cpuid;
+
+	__asm__ __volatile__("mov %%o7, %%g1\n\t"
+			     "call ___f___hard_smp_processor_id\n\t"
+			     " nop\n\t"
+			     "mov %%g2, %0\n\t" : "=r"(cpuid) : : "g1", "g2");
+	return cpuid;
+}
+#endif
+
+#define raw_smp_processor_id()		(current_thread_info()->cpu)
+
+#define prof_multiplier(__cpu)		cpu_data(__cpu).multiplier
+#define prof_counter(__cpu)		cpu_data(__cpu).counter
+
+void smp_setup_cpu_possible_map(void);
+
+#endif /* !(__ASSEMBLY__) */
+
+/* Sparc specific messages. */
+#define MSG_CROSS_CALL         0x0005       /* run func on cpus */
+
+/* Empirical PROM processor mailbox constants.  If the per-cpu mailbox
+ * contains something other than one of these then the ipi is from
+ * Linux's active_kernel_processor.  This facility exists so that
+ * the boot monitor can capture all the other cpus when one catches
+ * a watchdog reset or the user enters the monitor using L1-A keys.
+ */
+#define MBOX_STOPCPU          0xFB
+#define MBOX_IDLECPU          0xFC
+#define MBOX_IDLECPU2         0xFD
+#define MBOX_STOPCPU2         0xFE
+
+#else /* SMP */
+
+#define hard_smp_processor_id()		0
+#define smp_setup_cpu_possible_map() do { } while (0)
+
+#endif /* !(SMP) */
+
+#define NO_PROC_ID            0xFF
+
+#endif /* !(_SPARC_SMP_H) */
diff --git a/arch/sparc/include/asm/smp_64.h b/arch/sparc/include/asm/smp_64.h
new file mode 100644
index 0000000..57224dd
--- /dev/null
+++ b/arch/sparc/include/asm/smp_64.h
@@ -0,0 +1,67 @@
+/* smp.h: Sparc64 specific SMP stuff.
+ *
+ * Copyright (C) 1996, 2008 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC64_SMP_H
+#define _SPARC64_SMP_H
+
+#include <linux/threads.h>
+#include <asm/asi.h>
+#include <asm/starfire.h>
+#include <asm/spitfire.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/cpumask.h>
+#include <linux/cache.h>
+
+#endif /* !(__ASSEMBLY__) */
+
+#ifdef CONFIG_SMP
+
+#ifndef __ASSEMBLY__
+
+/*
+ *	Private routines/data
+ */
+
+#include <linux/bitops.h>
+#include <asm/atomic.h>
+#include <asm/percpu.h>
+
+DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
+extern cpumask_t cpu_core_map[NR_CPUS];
+extern int sparc64_multi_core;
+
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
+/*
+ *	General functions that each host system must provide.
+ */
+
+extern int hard_smp_processor_id(void);
+#define raw_smp_processor_id() (current_thread_info()->cpu)
+
+extern void smp_fill_in_sib_core_maps(void);
+extern void cpu_play_dead(void);
+
+extern void smp_fetch_global_regs(void);
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern int __cpu_disable(void);
+extern void __cpu_die(unsigned int cpu);
+#endif
+
+#endif /* !(__ASSEMBLY__) */
+
+#else
+
+#define hard_smp_processor_id()		0
+#define smp_fill_in_sib_core_maps() do { } while (0)
+#define smp_fetch_global_regs() do { } while (0)
+
+#endif /* !(CONFIG_SMP) */
+
+#endif /* !(_SPARC64_SMP_H) */
diff --git a/arch/sparc/include/asm/smpprim.h b/arch/sparc/include/asm/smpprim.h
new file mode 100644
index 0000000..eb849d8
--- /dev/null
+++ b/arch/sparc/include/asm/smpprim.h
@@ -0,0 +1,54 @@
+/*
+ *  smpprim.h:  SMP locking primitives on the Sparc
+ *
+ *  God knows we won't be actually using this code for some time
+ *  but I thought I'd write it since I knew how.
+ *
+ *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC_SMPPRIM_H
+#define __SPARC_SMPPRIM_H
+
+/* Test and set the unsigned byte at ADDR to 1.  Returns the previous
+ * value.  On the Sparc we use the ldstub instruction since it is
+ * atomic.
+ */
+
+static inline __volatile__ char test_and_set(void *addr)
+{
+	char state = 0;
+
+	__asm__ __volatile__("ldstub [%0], %1         ! test_and_set\n\t"
+			     "=r" (addr), "=r" (state) :
+			     "0" (addr), "1" (state) : "memory");
+
+	return state;
+}
+
+/* Initialize a spin-lock. */
+static inline __volatile__ smp_initlock(void *spinlock)
+{
+	/* Unset the lock. */
+	*((unsigned char *) spinlock) = 0;
+
+	return;
+}
+
+/* This routine spins until it acquires the lock at ADDR. */
+static inline __volatile__ smp_lock(void *addr)
+{
+	while(test_and_set(addr) == 0xff)
+		;
+
+	/* We now have the lock */
+	return;
+}
+
+/* This routine releases the lock at ADDR. */
+static inline __volatile__ smp_unlock(void *addr)
+{
+	*((unsigned char *) addr) = 0;
+}
+
+#endif /* !(__SPARC_SMPPRIM_H) */
diff --git a/arch/sparc/include/asm/socket.h b/arch/sparc/include/asm/socket.h
new file mode 100644
index 0000000..bf50d0c
--- /dev/null
+++ b/arch/sparc/include/asm/socket.h
@@ -0,0 +1,58 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	0xffff
+
+#define SO_DEBUG	0x0001
+#define SO_PASSCRED	0x0002
+#define SO_REUSEADDR	0x0004
+#define SO_KEEPALIVE	0x0008
+#define SO_DONTROUTE	0x0010
+#define SO_BROADCAST	0x0020
+#define SO_PEERCRED	0x0040
+#define SO_LINGER	0x0080
+#define SO_OOBINLINE	0x0100
+/* To add :#define SO_REUSEPORT 0x0200 */
+#define SO_BSDCOMPAT    0x0400
+#define SO_RCVLOWAT     0x0800
+#define SO_SNDLOWAT     0x1000
+#define SO_RCVTIMEO     0x2000
+#define SO_SNDTIMEO     0x4000
+#define SO_ACCEPTCONN	0x8000
+
+#define SO_SNDBUF	0x1001
+#define SO_RCVBUF	0x1002
+#define SO_SNDBUFFORCE	0x100a
+#define SO_RCVBUFFORCE	0x100b
+#define SO_ERROR	0x1007
+#define SO_TYPE		0x1008
+
+/* Linux specific, keep the same. */
+#define SO_NO_CHECK	0x000b
+#define SO_PRIORITY	0x000c
+
+#define SO_BINDTODEVICE 0x000d
+
+#define SO_ATTACH_FILTER	0x001a
+#define SO_DETACH_FILTER        0x001b
+
+#define SO_PEERNAME		0x001c
+#define SO_TIMESTAMP		0x001d
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_PEERSEC		0x001e
+#define SO_PASSSEC		0x001f
+#define SO_TIMESTAMPNS		0x0021
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			0x0022
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		0x5001
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	0x5002
+#define SO_SECURITY_ENCRYPTION_NETWORK		0x5004
+
+#endif /* _ASM_SOCKET_H */
diff --git a/arch/sparc/include/asm/sockios.h b/arch/sparc/include/asm/sockios.h
new file mode 100644
index 0000000..990ea74
--- /dev/null
+++ b/arch/sparc/include/asm/sockios.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_SPARC_SOCKIOS_H
+#define _ASM_SPARC_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif /* !(_ASM_SPARC_SOCKIOS_H) */
+
diff --git a/arch/sparc/include/asm/sparsemem.h b/arch/sparc/include/asm/sparsemem.h
new file mode 100644
index 0000000..b99d4e4
--- /dev/null
+++ b/arch/sparc/include/asm/sparsemem.h
@@ -0,0 +1,12 @@
+#ifndef _SPARC64_SPARSEMEM_H
+#define _SPARC64_SPARSEMEM_H
+
+#ifdef __KERNEL__
+
+#define SECTION_SIZE_BITS       30
+#define MAX_PHYSADDR_BITS       42
+#define MAX_PHYSMEM_BITS        42
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(_SPARC64_SPARSEMEM_H) */
diff --git a/arch/sparc/include/asm/spinlock.h b/arch/sparc/include/asm/spinlock.h
new file mode 100644
index 0000000..f276b00
--- /dev/null
+++ b/arch/sparc/include/asm/spinlock.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SPINLOCK_H
+#define ___ASM_SPARC_SPINLOCK_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/spinlock_64.h>
+#else
+#include <asm/spinlock_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/spinlock_32.h b/arch/sparc/include/asm/spinlock_32.h
new file mode 100644
index 0000000..de2249b
--- /dev/null
+++ b/arch/sparc/include/asm/spinlock_32.h
@@ -0,0 +1,192 @@
+/* spinlock.h: 32-bit Sparc spinlock support.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC_SPINLOCK_H
+#define __SPARC_SPINLOCK_H
+
+#include <linux/threads.h>	/* For NR_CPUS */
+
+#ifndef __ASSEMBLY__
+
+#include <asm/psr.h>
+
+#define __raw_spin_is_locked(lock) (*((volatile unsigned char *)(lock)) != 0)
+
+#define __raw_spin_unlock_wait(lock) \
+	do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
+
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+	__asm__ __volatile__(
+	"\n1:\n\t"
+	"ldstub	[%0], %%g2\n\t"
+	"orcc	%%g2, 0x0, %%g0\n\t"
+	"bne,a	2f\n\t"
+	" ldub	[%0], %%g2\n\t"
+	".subsection	2\n"
+	"2:\n\t"
+	"orcc	%%g2, 0x0, %%g0\n\t"
+	"bne,a	2b\n\t"
+	" ldub	[%0], %%g2\n\t"
+	"b,a	1b\n\t"
+	".previous\n"
+	: /* no outputs */
+	: "r" (lock)
+	: "g2", "memory", "cc");
+}
+
+static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+	unsigned int result;
+	__asm__ __volatile__("ldstub [%1], %0"
+			     : "=r" (result)
+			     : "r" (lock)
+			     : "memory");
+	return (result == 0);
+}
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+	__asm__ __volatile__("stb %%g0, [%0]" : : "r" (lock) : "memory");
+}
+
+/* Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ *
+ * XXX This might create some problems with my dual spinlock
+ * XXX scheme, deadlocks etc. -DaveM
+ *
+ * Sort of like atomic_t's on Sparc, but even more clever.
+ *
+ *	------------------------------------
+ *	| 24-bit counter           | wlock |  raw_rwlock_t
+ *	------------------------------------
+ *	 31                       8 7     0
+ *
+ * wlock signifies the one writer is in or somebody is updating
+ * counter. For a writer, if he successfully acquires the wlock,
+ * but counter is non-zero, he has to release the lock and wait,
+ * till both counter and wlock are zero.
+ *
+ * Unfortunately this scheme limits us to ~16,000,000 cpus.
+ */
+static inline void __read_lock(raw_rwlock_t *rw)
+{
+	register raw_rwlock_t *lp asm("g1");
+	lp = rw;
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___rw_read_enter\n\t"
+	" ldstub	[%%g1 + 3], %%g2\n"
+	: /* no outputs */
+	: "r" (lp)
+	: "g2", "g4", "memory", "cc");
+}
+
+#define __raw_read_lock(lock) \
+do {	unsigned long flags; \
+	local_irq_save(flags); \
+	__read_lock(lock); \
+	local_irq_restore(flags); \
+} while(0)
+
+static inline void __read_unlock(raw_rwlock_t *rw)
+{
+	register raw_rwlock_t *lp asm("g1");
+	lp = rw;
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___rw_read_exit\n\t"
+	" ldstub	[%%g1 + 3], %%g2\n"
+	: /* no outputs */
+	: "r" (lp)
+	: "g2", "g4", "memory", "cc");
+}
+
+#define __raw_read_unlock(lock) \
+do {	unsigned long flags; \
+	local_irq_save(flags); \
+	__read_unlock(lock); \
+	local_irq_restore(flags); \
+} while(0)
+
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
+	register raw_rwlock_t *lp asm("g1");
+	lp = rw;
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___rw_write_enter\n\t"
+	" ldstub	[%%g1 + 3], %%g2\n"
+	: /* no outputs */
+	: "r" (lp)
+	: "g2", "g4", "memory", "cc");
+	*(volatile __u32 *)&lp->lock = ~0U;
+}
+
+static inline int __raw_write_trylock(raw_rwlock_t *rw)
+{
+	unsigned int val;
+
+	__asm__ __volatile__("ldstub [%1 + 3], %0"
+			     : "=r" (val)
+			     : "r" (&rw->lock)
+			     : "memory");
+
+	if (val == 0) {
+		val = rw->lock & ~0xff;
+		if (val)
+			((volatile u8*)&rw->lock)[3] = 0;
+		else
+			*(volatile u32*)&rw->lock = ~0U;
+	}
+
+	return (val == 0);
+}
+
+static inline int __read_trylock(raw_rwlock_t *rw)
+{
+	register raw_rwlock_t *lp asm("g1");
+	register int res asm("o0");
+	lp = rw;
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___rw_read_try\n\t"
+	" ldstub	[%%g1 + 3], %%g2\n"
+	: "=r" (res)
+	: "r" (lp)
+	: "g2", "g4", "memory", "cc");
+	return res;
+}
+
+#define __raw_read_trylock(lock) \
+({	unsigned long flags; \
+	int res; \
+	local_irq_save(flags); \
+	res = __read_trylock(lock); \
+	local_irq_restore(flags); \
+	res; \
+})
+
+#define __raw_write_unlock(rw)	do { (rw)->lock = 0; } while(0)
+
+#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
+
+#define _raw_spin_relax(lock)	cpu_relax()
+#define _raw_read_relax(lock)	cpu_relax()
+#define _raw_write_relax(lock)	cpu_relax()
+
+#define __raw_read_can_lock(rw) (!((rw)->lock & 0xff))
+#define __raw_write_can_lock(rw) (!(rw)->lock)
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* __SPARC_SPINLOCK_H */
diff --git a/arch/sparc/include/asm/spinlock_64.h b/arch/sparc/include/asm/spinlock_64.h
new file mode 100644
index 0000000..0006fe9
--- /dev/null
+++ b/arch/sparc/include/asm/spinlock_64.h
@@ -0,0 +1,250 @@
+/* spinlock.h: 64-bit Sparc spinlock support.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC64_SPINLOCK_H
+#define __SPARC64_SPINLOCK_H
+
+#include <linux/threads.h>	/* For NR_CPUS */
+
+#ifndef __ASSEMBLY__
+
+/* To get debugging spinlocks which detect and catch
+ * deadlock situations, set CONFIG_DEBUG_SPINLOCK
+ * and rebuild your kernel.
+ */
+
+/* All of these locking primitives are expected to work properly
+ * even in an RMO memory model, which currently is what the kernel
+ * runs in.
+ *
+ * There is another issue.  Because we play games to save cycles
+ * in the non-contention case, we need to be extra careful about
+ * branch targets into the "spinning" code.  They live in their
+ * own section, but the newer V9 branches have a shorter range
+ * than the traditional 32-bit sparc branch variants.  The rule
+ * is that the branches that go into and out of the spinner sections
+ * must be pre-V9 branches.
+ */
+
+#define __raw_spin_is_locked(lp)	((lp)->lock != 0)
+
+#define __raw_spin_unlock_wait(lp)	\
+	do {	rmb();			\
+	} while((lp)->lock)
+
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+"1:	ldstub		[%1], %0\n"
+"	membar		#StoreLoad | #StoreStore\n"
+"	brnz,pn		%0, 2f\n"
+"	 nop\n"
+"	.subsection	2\n"
+"2:	ldub		[%1], %0\n"
+"	membar		#LoadLoad\n"
+"	brnz,pt		%0, 2b\n"
+"	 nop\n"
+"	ba,a,pt		%%xcc, 1b\n"
+"	.previous"
+	: "=&r" (tmp)
+	: "r" (lock)
+	: "memory");
+}
+
+static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+	unsigned long result;
+
+	__asm__ __volatile__(
+"	ldstub		[%1], %0\n"
+"	membar		#StoreLoad | #StoreStore"
+	: "=r" (result)
+	: "r" (lock)
+	: "memory");
+
+	return (result == 0UL);
+}
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+	__asm__ __volatile__(
+"	membar		#StoreStore | #LoadStore\n"
+"	stb		%%g0, [%0]"
+	: /* No outputs */
+	: "r" (lock)
+	: "memory");
+}
+
+static inline void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
+{
+	unsigned long tmp1, tmp2;
+
+	__asm__ __volatile__(
+"1:	ldstub		[%2], %0\n"
+"	membar		#StoreLoad | #StoreStore\n"
+"	brnz,pn		%0, 2f\n"
+"	 nop\n"
+"	.subsection	2\n"
+"2:	rdpr		%%pil, %1\n"
+"	wrpr		%3, %%pil\n"
+"3:	ldub		[%2], %0\n"
+"	membar		#LoadLoad\n"
+"	brnz,pt		%0, 3b\n"
+"	 nop\n"
+"	ba,pt		%%xcc, 1b\n"
+"	 wrpr		%1, %%pil\n"
+"	.previous"
+	: "=&r" (tmp1), "=&r" (tmp2)
+	: "r"(lock), "r"(flags)
+	: "memory");
+}
+
+/* Multi-reader locks, these are much saner than the 32-bit Sparc ones... */
+
+static void inline __read_lock(raw_rwlock_t *lock)
+{
+	unsigned long tmp1, tmp2;
+
+	__asm__ __volatile__ (
+"1:	ldsw		[%2], %0\n"
+"	brlz,pn		%0, 2f\n"
+"4:	 add		%0, 1, %1\n"
+"	cas		[%2], %0, %1\n"
+"	cmp		%0, %1\n"
+"	membar		#StoreLoad | #StoreStore\n"
+"	bne,pn		%%icc, 1b\n"
+"	 nop\n"
+"	.subsection	2\n"
+"2:	ldsw		[%2], %0\n"
+"	membar		#LoadLoad\n"
+"	brlz,pt		%0, 2b\n"
+"	 nop\n"
+"	ba,a,pt		%%xcc, 4b\n"
+"	.previous"
+	: "=&r" (tmp1), "=&r" (tmp2)
+	: "r" (lock)
+	: "memory");
+}
+
+static int inline __read_trylock(raw_rwlock_t *lock)
+{
+	int tmp1, tmp2;
+
+	__asm__ __volatile__ (
+"1:	ldsw		[%2], %0\n"
+"	brlz,a,pn	%0, 2f\n"
+"	 mov		0, %0\n"
+"	add		%0, 1, %1\n"
+"	cas		[%2], %0, %1\n"
+"	cmp		%0, %1\n"
+"	membar		#StoreLoad | #StoreStore\n"
+"	bne,pn		%%icc, 1b\n"
+"	 mov		1, %0\n"
+"2:"
+	: "=&r" (tmp1), "=&r" (tmp2)
+	: "r" (lock)
+	: "memory");
+
+	return tmp1;
+}
+
+static void inline __read_unlock(raw_rwlock_t *lock)
+{
+	unsigned long tmp1, tmp2;
+
+	__asm__ __volatile__(
+"	membar	#StoreLoad | #LoadLoad\n"
+"1:	lduw	[%2], %0\n"
+"	sub	%0, 1, %1\n"
+"	cas	[%2], %0, %1\n"
+"	cmp	%0, %1\n"
+"	bne,pn	%%xcc, 1b\n"
+"	 nop"
+	: "=&r" (tmp1), "=&r" (tmp2)
+	: "r" (lock)
+	: "memory");
+}
+
+static void inline __write_lock(raw_rwlock_t *lock)
+{
+	unsigned long mask, tmp1, tmp2;
+
+	mask = 0x80000000UL;
+
+	__asm__ __volatile__(
+"1:	lduw		[%2], %0\n"
+"	brnz,pn		%0, 2f\n"
+"4:	 or		%0, %3, %1\n"
+"	cas		[%2], %0, %1\n"
+"	cmp		%0, %1\n"
+"	membar		#StoreLoad | #StoreStore\n"
+"	bne,pn		%%icc, 1b\n"
+"	 nop\n"
+"	.subsection	2\n"
+"2:	lduw		[%2], %0\n"
+"	membar		#LoadLoad\n"
+"	brnz,pt		%0, 2b\n"
+"	 nop\n"
+"	ba,a,pt		%%xcc, 4b\n"
+"	.previous"
+	: "=&r" (tmp1), "=&r" (tmp2)
+	: "r" (lock), "r" (mask)
+	: "memory");
+}
+
+static void inline __write_unlock(raw_rwlock_t *lock)
+{
+	__asm__ __volatile__(
+"	membar		#LoadStore | #StoreStore\n"
+"	stw		%%g0, [%0]"
+	: /* no outputs */
+	: "r" (lock)
+	: "memory");
+}
+
+static int inline __write_trylock(raw_rwlock_t *lock)
+{
+	unsigned long mask, tmp1, tmp2, result;
+
+	mask = 0x80000000UL;
+
+	__asm__ __volatile__(
+"	mov		0, %2\n"
+"1:	lduw		[%3], %0\n"
+"	brnz,pn		%0, 2f\n"
+"	 or		%0, %4, %1\n"
+"	cas		[%3], %0, %1\n"
+"	cmp		%0, %1\n"
+"	membar		#StoreLoad | #StoreStore\n"
+"	bne,pn		%%icc, 1b\n"
+"	 nop\n"
+"	mov		1, %2\n"
+"2:"
+	: "=&r" (tmp1), "=&r" (tmp2), "=&r" (result)
+	: "r" (lock), "r" (mask)
+	: "memory");
+
+	return result;
+}
+
+#define __raw_read_lock(p)	__read_lock(p)
+#define __raw_read_trylock(p)	__read_trylock(p)
+#define __raw_read_unlock(p)	__read_unlock(p)
+#define __raw_write_lock(p)	__write_lock(p)
+#define __raw_write_unlock(p)	__write_unlock(p)
+#define __raw_write_trylock(p)	__write_trylock(p)
+
+#define __raw_read_can_lock(rw)		(!((rw)->lock & 0x80000000UL))
+#define __raw_write_can_lock(rw)	(!(rw)->lock)
+
+#define _raw_spin_relax(lock)	cpu_relax()
+#define _raw_read_relax(lock)	cpu_relax()
+#define _raw_write_relax(lock)	cpu_relax()
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC64_SPINLOCK_H) */
diff --git a/arch/sparc/include/asm/spinlock_types.h b/arch/sparc/include/asm/spinlock_types.h
new file mode 100644
index 0000000..37cbe01
--- /dev/null
+++ b/arch/sparc/include/asm/spinlock_types.h
@@ -0,0 +1,20 @@
+#ifndef __SPARC_SPINLOCK_TYPES_H
+#define __SPARC_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct {
+	volatile unsigned char lock;
+} raw_spinlock_t;
+
+#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
+
+typedef struct {
+	volatile unsigned int lock;
+} raw_rwlock_t;
+
+#define __RAW_RW_LOCK_UNLOCKED		{ 0 }
+
+#endif
diff --git a/arch/sparc/include/asm/spitfire.h b/arch/sparc/include/asm/spitfire.h
new file mode 100644
index 0000000..985ea7e
--- /dev/null
+++ b/arch/sparc/include/asm/spitfire.h
@@ -0,0 +1,342 @@
+/* spitfire.h: SpitFire/BlackBird/Cheetah inline MMU operations.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC64_SPITFIRE_H
+#define _SPARC64_SPITFIRE_H
+
+#include <asm/asi.h>
+
+/* The following register addresses are accessible via ASI_DMMU
+ * and ASI_IMMU, that is there is a distinct and unique copy of
+ * each these registers for each TLB.
+ */
+#define TSB_TAG_TARGET		0x0000000000000000 /* All chips				*/
+#define TLB_SFSR		0x0000000000000018 /* All chips				*/
+#define TSB_REG			0x0000000000000028 /* All chips				*/
+#define TLB_TAG_ACCESS		0x0000000000000030 /* All chips				*/
+#define VIRT_WATCHPOINT		0x0000000000000038 /* All chips				*/
+#define PHYS_WATCHPOINT		0x0000000000000040 /* All chips				*/
+#define TSB_EXTENSION_P		0x0000000000000048 /* Ultra-III and later		*/
+#define TSB_EXTENSION_S		0x0000000000000050 /* Ultra-III and later, D-TLB only	*/
+#define TSB_EXTENSION_N		0x0000000000000058 /* Ultra-III and later		*/
+#define TLB_TAG_ACCESS_EXT	0x0000000000000060 /* Ultra-III+ and later		*/
+
+/* These registers only exist as one entity, and are accessed
+ * via ASI_DMMU only.
+ */
+#define PRIMARY_CONTEXT		0x0000000000000008
+#define SECONDARY_CONTEXT	0x0000000000000010
+#define DMMU_SFAR		0x0000000000000020
+#define VIRT_WATCHPOINT		0x0000000000000038
+#define PHYS_WATCHPOINT		0x0000000000000040
+
+#define SPITFIRE_HIGHEST_LOCKED_TLBENT	(64 - 1)
+#define CHEETAH_HIGHEST_LOCKED_TLBENT	(16 - 1)
+
+#define L1DCACHE_SIZE		0x4000
+
+#define SUN4V_CHIP_INVALID	0x00
+#define SUN4V_CHIP_NIAGARA1	0x01
+#define SUN4V_CHIP_NIAGARA2	0x02
+#define SUN4V_CHIP_UNKNOWN	0xff
+
+#ifndef __ASSEMBLY__
+
+enum ultra_tlb_layout {
+	spitfire = 0,
+	cheetah = 1,
+	cheetah_plus = 2,
+	hypervisor = 3,
+};
+
+extern enum ultra_tlb_layout tlb_type;
+
+extern int sun4v_chip_type;
+
+extern int cheetah_pcache_forced_on;
+extern void cheetah_enable_pcache(void);
+
+#define sparc64_highest_locked_tlbent()	\
+	(tlb_type == spitfire ? \
+	 SPITFIRE_HIGHEST_LOCKED_TLBENT : \
+	 CHEETAH_HIGHEST_LOCKED_TLBENT)
+
+extern int num_kernel_image_mappings;
+
+/* The data cache is write through, so this just invalidates the
+ * specified line.
+ */
+static inline void spitfire_put_dcache_tag(unsigned long addr, unsigned long tag)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (tag), "r" (addr), "i" (ASI_DCACHE_TAG));
+}
+
+/* The instruction cache lines are flushed with this, but note that
+ * this does not flush the pipeline.  It is possible for a line to
+ * get flushed but stale instructions to still be in the pipeline,
+ * a flush instruction (to any address) is sufficient to handle
+ * this issue after the line is invalidated.
+ */
+static inline void spitfire_put_icache_tag(unsigned long addr, unsigned long tag)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (tag), "r" (addr), "i" (ASI_IC_TAG));
+}
+
+static inline unsigned long spitfire_get_dtlb_data(int entry)
+{
+	unsigned long data;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (data)
+			     : "r" (entry << 3), "i" (ASI_DTLB_DATA_ACCESS));
+
+	/* Clear TTE diag bits. */
+	data &= ~0x0003fe0000000000UL;
+
+	return data;
+}
+
+static inline unsigned long spitfire_get_dtlb_tag(int entry)
+{
+	unsigned long tag;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (tag)
+			     : "r" (entry << 3), "i" (ASI_DTLB_TAG_READ));
+	return tag;
+}
+
+static inline void spitfire_put_dtlb_data(int entry, unsigned long data)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (data), "r" (entry << 3),
+			       "i" (ASI_DTLB_DATA_ACCESS));
+}
+
+static inline unsigned long spitfire_get_itlb_data(int entry)
+{
+	unsigned long data;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (data)
+			     : "r" (entry << 3), "i" (ASI_ITLB_DATA_ACCESS));
+
+	/* Clear TTE diag bits. */
+	data &= ~0x0003fe0000000000UL;
+
+	return data;
+}
+
+static inline unsigned long spitfire_get_itlb_tag(int entry)
+{
+	unsigned long tag;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (tag)
+			     : "r" (entry << 3), "i" (ASI_ITLB_TAG_READ));
+	return tag;
+}
+
+static inline void spitfire_put_itlb_data(int entry, unsigned long data)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (data), "r" (entry << 3),
+			       "i" (ASI_ITLB_DATA_ACCESS));
+}
+
+static inline void spitfire_flush_dtlb_nucleus_page(unsigned long page)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (page | 0x20), "i" (ASI_DMMU_DEMAP));
+}
+
+static inline void spitfire_flush_itlb_nucleus_page(unsigned long page)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (page | 0x20), "i" (ASI_IMMU_DEMAP));
+}
+
+/* Cheetah has "all non-locked" tlb flushes. */
+static inline void cheetah_flush_dtlb_all(void)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (0x80), "i" (ASI_DMMU_DEMAP));
+}
+
+static inline void cheetah_flush_itlb_all(void)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (0x80), "i" (ASI_IMMU_DEMAP));
+}
+
+/* Cheetah has a 4-tlb layout so direct access is a bit different.
+ * The first two TLBs are fully assosciative, hold 16 entries, and are
+ * used only for locked and >8K sized translations.  One exists for
+ * data accesses and one for instruction accesses.
+ *
+ * The third TLB is for data accesses to 8K non-locked translations, is
+ * 2 way assosciative, and holds 512 entries.  The fourth TLB is for
+ * instruction accesses to 8K non-locked translations, is 2 way
+ * assosciative, and holds 128 entries.
+ *
+ * Cheetah has some bug where bogus data can be returned from
+ * ASI_{D,I}TLB_DATA_ACCESS loads, doing the load twice fixes
+ * the problem for me. -DaveM
+ */
+static inline unsigned long cheetah_get_ldtlb_data(int entry)
+{
+	unsigned long data;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %%g0\n\t"
+			     "ldxa	[%1] %2, %0"
+			     : "=r" (data)
+			     : "r" ((0 << 16) | (entry << 3)),
+			     "i" (ASI_DTLB_DATA_ACCESS));
+
+	return data;
+}
+
+static inline unsigned long cheetah_get_litlb_data(int entry)
+{
+	unsigned long data;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %%g0\n\t"
+			     "ldxa	[%1] %2, %0"
+			     : "=r" (data)
+			     : "r" ((0 << 16) | (entry << 3)),
+			     "i" (ASI_ITLB_DATA_ACCESS));
+
+	return data;
+}
+
+static inline unsigned long cheetah_get_ldtlb_tag(int entry)
+{
+	unsigned long tag;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (tag)
+			     : "r" ((0 << 16) | (entry << 3)),
+			     "i" (ASI_DTLB_TAG_READ));
+
+	return tag;
+}
+
+static inline unsigned long cheetah_get_litlb_tag(int entry)
+{
+	unsigned long tag;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (tag)
+			     : "r" ((0 << 16) | (entry << 3)),
+			     "i" (ASI_ITLB_TAG_READ));
+
+	return tag;
+}
+
+static inline void cheetah_put_ldtlb_data(int entry, unsigned long data)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (data),
+			       "r" ((0 << 16) | (entry << 3)),
+			       "i" (ASI_DTLB_DATA_ACCESS));
+}
+
+static inline void cheetah_put_litlb_data(int entry, unsigned long data)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (data),
+			       "r" ((0 << 16) | (entry << 3)),
+			       "i" (ASI_ITLB_DATA_ACCESS));
+}
+
+static inline unsigned long cheetah_get_dtlb_data(int entry, int tlb)
+{
+	unsigned long data;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %%g0\n\t"
+			     "ldxa	[%1] %2, %0"
+			     : "=r" (data)
+			     : "r" ((tlb << 16) | (entry << 3)), "i" (ASI_DTLB_DATA_ACCESS));
+
+	return data;
+}
+
+static inline unsigned long cheetah_get_dtlb_tag(int entry, int tlb)
+{
+	unsigned long tag;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (tag)
+			     : "r" ((tlb << 16) | (entry << 3)), "i" (ASI_DTLB_TAG_READ));
+	return tag;
+}
+
+static inline void cheetah_put_dtlb_data(int entry, unsigned long data, int tlb)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (data),
+			       "r" ((tlb << 16) | (entry << 3)),
+			       "i" (ASI_DTLB_DATA_ACCESS));
+}
+
+static inline unsigned long cheetah_get_itlb_data(int entry)
+{
+	unsigned long data;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %%g0\n\t"
+			     "ldxa	[%1] %2, %0"
+			     : "=r" (data)
+			     : "r" ((2 << 16) | (entry << 3)),
+                               "i" (ASI_ITLB_DATA_ACCESS));
+
+	return data;
+}
+
+static inline unsigned long cheetah_get_itlb_tag(int entry)
+{
+	unsigned long tag;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (tag)
+			     : "r" ((2 << 16) | (entry << 3)), "i" (ASI_ITLB_TAG_READ));
+	return tag;
+}
+
+static inline void cheetah_put_itlb_data(int entry, unsigned long data)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (data), "r" ((2 << 16) | (entry << 3)),
+			       "i" (ASI_ITLB_DATA_ACCESS));
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC64_SPITFIRE_H) */
diff --git a/arch/sparc/include/asm/sstate.h b/arch/sparc/include/asm/sstate.h
new file mode 100644
index 0000000..a7c35db
--- /dev/null
+++ b/arch/sparc/include/asm/sstate.h
@@ -0,0 +1,13 @@
+#ifndef _SPARC64_SSTATE_H
+#define _SPARC64_SSTATE_H
+
+extern void sstate_booting(void);
+extern void sstate_running(void);
+extern void sstate_halt(void);
+extern void sstate_poweroff(void);
+extern void sstate_panic(void);
+extern void sstate_reboot(void);
+
+extern void sun4v_sstate_init(void);
+
+#endif /* _SPARC64_SSTATE_H */
diff --git a/arch/sparc/include/asm/stacktrace.h b/arch/sparc/include/asm/stacktrace.h
new file mode 100644
index 0000000..6cee39a
--- /dev/null
+++ b/arch/sparc/include/asm/stacktrace.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC64_STACKTRACE_H
+#define _SPARC64_STACKTRACE_H
+
+extern void stack_trace_flush(void);
+
+#endif /* _SPARC64_STACKTRACE_H */
diff --git a/arch/sparc/include/asm/starfire.h b/arch/sparc/include/asm/starfire.h
new file mode 100644
index 0000000..07bafd3
--- /dev/null
+++ b/arch/sparc/include/asm/starfire.h
@@ -0,0 +1,21 @@
+/*
+ * starfire.h: Group all starfire specific code together.
+ *
+ * Copyright (C) 2000 Anton Blanchard (anton@samba.org)
+ */
+
+#ifndef _SPARC64_STARFIRE_H
+#define _SPARC64_STARFIRE_H
+
+#ifndef __ASSEMBLY__
+
+extern int this_is_starfire;
+
+extern void check_if_starfire(void);
+extern void starfire_cpu_setup(void);
+extern int starfire_hard_smp_processor_id(void);
+extern void starfire_hookup(int);
+extern unsigned int starfire_translate(unsigned long imap, unsigned int upaid);
+
+#endif
+#endif
diff --git a/arch/sparc/include/asm/stat.h b/arch/sparc/include/asm/stat.h
new file mode 100644
index 0000000..d815301
--- /dev/null
+++ b/arch/sparc/include/asm/stat.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_STAT_H
+#define ___ASM_SPARC_STAT_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/stat_64.h>
+#else
+#include <asm/stat_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/stat_32.h b/arch/sparc/include/asm/stat_32.h
new file mode 100644
index 0000000..2299e1d5
--- /dev/null
+++ b/arch/sparc/include/asm/stat_32.h
@@ -0,0 +1,76 @@
+#ifndef _SPARC_STAT_H
+#define _SPARC_STAT_H
+
+#include <linux/types.h>
+
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+
+struct stat {
+	unsigned short	st_dev;
+	unsigned long	st_ino;
+	unsigned short	st_mode;
+	short		st_nlink;
+	unsigned short	st_uid;
+	unsigned short	st_gid;
+	unsigned short	st_rdev;
+	long		st_size;
+	long		st_atime;
+	unsigned long	st_atime_nsec;
+	long		st_mtime;
+	unsigned long	st_mtime_nsec;
+	long		st_ctime;
+	unsigned long	st_ctime_nsec;
+	long		st_blksize;
+	long		st_blocks;
+	unsigned long	__unused4[2];
+};
+
+#define STAT_HAVE_NSEC 1
+
+struct stat64 {
+	unsigned long long st_dev;
+
+	unsigned long long st_ino;
+
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+
+	unsigned long long st_rdev;
+
+	unsigned char	__pad3[8];
+
+	long long	st_size;
+	unsigned int	st_blksize;
+
+	unsigned char	__pad4[8];
+	unsigned int	st_blocks;
+
+	unsigned int	st_atime;
+	unsigned int	st_atime_nsec;
+
+	unsigned int	st_mtime;
+	unsigned int	st_mtime_nsec;
+
+	unsigned int	st_ctime;
+	unsigned int	st_ctime_nsec;
+
+	unsigned int	__unused4;
+	unsigned int	__unused5;
+};
+
+#endif
diff --git a/arch/sparc/include/asm/stat_64.h b/arch/sparc/include/asm/stat_64.h
new file mode 100644
index 0000000..9650fde
--- /dev/null
+++ b/arch/sparc/include/asm/stat_64.h
@@ -0,0 +1,47 @@
+#ifndef _SPARC64_STAT_H
+#define _SPARC64_STAT_H
+
+#include <linux/types.h>
+
+struct stat {
+	unsigned   st_dev;
+	ino_t   st_ino;
+	mode_t  st_mode;
+	short   st_nlink;
+	uid_t   st_uid;
+	gid_t   st_gid;
+	unsigned   st_rdev;
+	off_t   st_size;
+	time_t  st_atime;
+	time_t  st_mtime;
+	time_t  st_ctime;
+	off_t   st_blksize;
+	off_t   st_blocks;
+	unsigned long  __unused4[2];
+};
+
+struct stat64 {
+	unsigned long	st_dev;
+	unsigned long	st_ino;
+	unsigned long	st_nlink;
+
+	unsigned int	st_mode;
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+	unsigned int	__pad0;
+
+	unsigned long	st_rdev;
+	long		st_size;
+	long		st_blksize;
+	long		st_blocks;
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+	long		__unused[3];
+};
+
+#endif
diff --git a/arch/sparc/include/asm/statfs.h b/arch/sparc/include/asm/statfs.h
new file mode 100644
index 0000000..5e937a7
--- /dev/null
+++ b/arch/sparc/include/asm/statfs.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_STATFS_H
+#define ___ASM_SPARC_STATFS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/statfs_64.h>
+#else
+#include <asm/statfs_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/statfs_32.h b/arch/sparc/include/asm/statfs_32.h
new file mode 100644
index 0000000..304520f
--- /dev/null
+++ b/arch/sparc/include/asm/statfs_32.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC_STATFS_H
+#define _SPARC_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif
diff --git a/arch/sparc/include/asm/statfs_64.h b/arch/sparc/include/asm/statfs_64.h
new file mode 100644
index 0000000..79b3c89
--- /dev/null
+++ b/arch/sparc/include/asm/statfs_64.h
@@ -0,0 +1,54 @@
+#ifndef _SPARC64_STATFS_H
+#define _SPARC64_STATFS_H
+
+#ifndef __KERNEL_STRICT_NAMES
+
+#include <linux/types.h>
+
+typedef __kernel_fsid_t	fsid_t;
+
+#endif
+
+struct statfs {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+struct statfs64 {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+struct compat_statfs64 {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u64 f_blocks;
+	__u64 f_bfree;
+	__u64 f_bavail;
+	__u64 f_files;
+	__u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_spare[5];
+};
+
+#endif
diff --git a/arch/sparc/include/asm/string.h b/arch/sparc/include/asm/string.h
new file mode 100644
index 0000000..98b72a0
--- /dev/null
+++ b/arch/sparc/include/asm/string.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_STRING_H
+#define ___ASM_SPARC_STRING_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/string_64.h>
+#else
+#include <asm/string_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/string_32.h b/arch/sparc/include/asm/string_32.h
new file mode 100644
index 0000000..6c5fddb
--- /dev/null
+++ b/arch/sparc/include/asm/string_32.h
@@ -0,0 +1,205 @@
+/*
+ * string.h: External definitions for optimized assembly string
+ *           routines for the Linux Kernel.
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __SPARC_STRING_H__
+#define __SPARC_STRING_H__
+
+#include <asm/page.h>
+
+/* Really, userland/ksyms should not see any of this stuff. */
+
+#ifdef __KERNEL__
+
+extern void __memmove(void *,const void *,__kernel_size_t);
+extern __kernel_size_t __memcpy(void *,const void *,__kernel_size_t);
+extern __kernel_size_t __memset(void *,int,__kernel_size_t);
+
+#ifndef EXPORT_SYMTAB_STROPS
+
+/* First the mem*() things. */
+#define __HAVE_ARCH_MEMMOVE
+#undef memmove
+#define memmove(_to, _from, _n) \
+({ \
+	void *_t = (_to); \
+	__memmove(_t, (_from), (_n)); \
+	_t; \
+})
+
+#define __HAVE_ARCH_MEMCPY
+
+static inline void *__constant_memcpy(void *to, const void *from, __kernel_size_t n)
+{
+	extern void __copy_1page(void *, const void *);
+
+	if(n <= 32) {
+		__builtin_memcpy(to, from, n);
+	} else if (((unsigned int) to & 7) != 0) {
+		/* Destination is not aligned on the double-word boundary */
+		__memcpy(to, from, n);
+	} else {
+		switch(n) {
+		case PAGE_SIZE:
+			__copy_1page(to, from);
+			break;
+		default:
+			__memcpy(to, from, n);
+			break;
+		}
+	}
+	return to;
+}
+
+static inline void *__nonconstant_memcpy(void *to, const void *from, __kernel_size_t n)
+{
+	__memcpy(to, from, n);
+	return to;
+}
+
+#undef memcpy
+#define memcpy(t, f, n) \
+(__builtin_constant_p(n) ? \
+ __constant_memcpy((t),(f),(n)) : \
+ __nonconstant_memcpy((t),(f),(n)))
+
+#define __HAVE_ARCH_MEMSET
+
+static inline void *__constant_c_and_count_memset(void *s, char c, __kernel_size_t count)
+{
+	extern void bzero_1page(void *);
+	extern __kernel_size_t __bzero(void *, __kernel_size_t);
+
+	if(!c) {
+		if(count == PAGE_SIZE)
+			bzero_1page(s);
+		else
+			__bzero(s, count);
+	} else {
+		__memset(s, c, count);
+	}
+	return s;
+}
+
+static inline void *__constant_c_memset(void *s, char c, __kernel_size_t count)
+{
+	extern __kernel_size_t __bzero(void *, __kernel_size_t);
+
+	if(!c)
+		__bzero(s, count);
+	else
+		__memset(s, c, count);
+	return s;
+}
+
+static inline void *__nonconstant_memset(void *s, char c, __kernel_size_t count)
+{
+	__memset(s, c, count);
+	return s;
+}
+
+#undef memset
+#define memset(s, c, count) \
+(__builtin_constant_p(c) ? (__builtin_constant_p(count) ? \
+                            __constant_c_and_count_memset((s), (c), (count)) : \
+                            __constant_c_memset((s), (c), (count))) \
+                          : __nonconstant_memset((s), (c), (count)))
+
+#define __HAVE_ARCH_MEMSCAN
+
+#undef memscan
+#define memscan(__arg0, __char, __arg2)						\
+({										\
+	extern void *__memscan_zero(void *, size_t);				\
+	extern void *__memscan_generic(void *, int, size_t);			\
+	void *__retval, *__addr = (__arg0);					\
+	size_t __size = (__arg2);						\
+										\
+	if(__builtin_constant_p(__char) && !(__char))				\
+		__retval = __memscan_zero(__addr, __size);			\
+	else									\
+		__retval = __memscan_generic(__addr, (__char), __size);		\
+										\
+	__retval;								\
+})
+
+#define __HAVE_ARCH_MEMCMP
+extern int memcmp(const void *,const void *,__kernel_size_t);
+
+/* Now the str*() stuff... */
+#define __HAVE_ARCH_STRLEN
+extern __kernel_size_t strlen(const char *);
+
+#define __HAVE_ARCH_STRNCMP
+
+extern int __strncmp(const char *, const char *, __kernel_size_t);
+
+static inline int __constant_strncmp(const char *src, const char *dest, __kernel_size_t count)
+{
+	register int retval;
+	switch(count) {
+	case 0: return 0;
+	case 1: return (src[0] - dest[0]);
+	case 2: retval = (src[0] - dest[0]);
+		if(!retval && src[0])
+		  retval = (src[1] - dest[1]);
+		return retval;
+	case 3: retval = (src[0] - dest[0]);
+		if(!retval && src[0]) {
+		  retval = (src[1] - dest[1]);
+		  if(!retval && src[1])
+		    retval = (src[2] - dest[2]);
+		}
+		return retval;
+	case 4: retval = (src[0] - dest[0]);
+		if(!retval && src[0]) {
+		  retval = (src[1] - dest[1]);
+		  if(!retval && src[1]) {
+		    retval = (src[2] - dest[2]);
+		    if (!retval && src[2])
+		      retval = (src[3] - dest[3]);
+		  }
+		}
+		return retval;
+	case 5: retval = (src[0] - dest[0]);
+		if(!retval && src[0]) {
+		  retval = (src[1] - dest[1]);
+		  if(!retval && src[1]) {
+		    retval = (src[2] - dest[2]);
+		    if (!retval && src[2]) {
+		      retval = (src[3] - dest[3]);
+		      if (!retval && src[3])
+		        retval = (src[4] - dest[4]);
+		    }
+		  }
+		}
+		return retval;
+	default:
+		retval = (src[0] - dest[0]);
+		if(!retval && src[0]) {
+		  retval = (src[1] - dest[1]);
+		  if(!retval && src[1]) {
+		    retval = (src[2] - dest[2]);
+		    if(!retval && src[2])
+		      retval = __strncmp(src+3,dest+3,count-3);
+		  }
+		}
+		return retval;
+	}
+}
+
+#undef strncmp
+#define strncmp(__arg0, __arg1, __arg2)	\
+(__builtin_constant_p(__arg2) ?	\
+ __constant_strncmp(__arg0, __arg1, __arg2) : \
+ __strncmp(__arg0, __arg1, __arg2))
+
+#endif /* !EXPORT_SYMTAB_STROPS */
+
+#endif /* __KERNEL__ */
+
+#endif /* !(__SPARC_STRING_H__) */
diff --git a/arch/sparc/include/asm/string_64.h b/arch/sparc/include/asm/string_64.h
new file mode 100644
index 0000000..43161f2
--- /dev/null
+++ b/arch/sparc/include/asm/string_64.h
@@ -0,0 +1,83 @@
+/*
+ * string.h: External definitions for optimized assembly string
+ *           routines for the Linux Kernel.
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996,1997,1999 Jakub Jelinek (jakub@redhat.com)
+ */
+
+#ifndef __SPARC64_STRING_H__
+#define __SPARC64_STRING_H__
+
+/* Really, userland/ksyms should not see any of this stuff. */
+
+#ifdef __KERNEL__
+
+#include <asm/asi.h>
+
+extern void *__memset(void *,int,__kernel_size_t);
+
+#ifndef EXPORT_SYMTAB_STROPS
+
+/* First the mem*() things. */
+#define __HAVE_ARCH_MEMMOVE
+extern void *memmove(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMSET
+extern void *__builtin_memset(void *,int,__kernel_size_t);
+
+static inline void *__constant_memset(void *s, int c, __kernel_size_t count)
+{
+	extern __kernel_size_t __bzero(void *, __kernel_size_t);
+
+	if (!c) {
+		__bzero(s, count);
+		return s;
+	} else
+		return __memset(s, c, count);
+}
+
+#undef memset
+#define memset(s, c, count) \
+((__builtin_constant_p(count) && (count) <= 32) ? \
+ __builtin_memset((s), (c), (count)) : \
+ (__builtin_constant_p(c) ? \
+  __constant_memset((s), (c), (count)) : \
+  __memset((s), (c), (count))))
+
+#define __HAVE_ARCH_MEMSCAN
+
+#undef memscan
+#define memscan(__arg0, __char, __arg2)					\
+({									\
+	extern void *__memscan_zero(void *, size_t);			\
+	extern void *__memscan_generic(void *, int, size_t);		\
+	void *__retval, *__addr = (__arg0);				\
+	size_t __size = (__arg2);					\
+									\
+	if(__builtin_constant_p(__char) && !(__char))			\
+		__retval = __memscan_zero(__addr, __size);		\
+	else								\
+		__retval = __memscan_generic(__addr, (__char), __size);	\
+									\
+	__retval;							\
+})
+
+#define __HAVE_ARCH_MEMCMP
+extern int memcmp(const void *,const void *,__kernel_size_t);
+
+/* Now the str*() stuff... */
+#define __HAVE_ARCH_STRLEN
+extern __kernel_size_t strlen(const char *);
+
+#define __HAVE_ARCH_STRNCMP
+extern int strncmp(const char *, const char *, __kernel_size_t);
+
+#endif /* !EXPORT_SYMTAB_STROPS */
+
+#endif /* __KERNEL__ */
+
+#endif /* !(__SPARC64_STRING_H__) */
diff --git a/arch/sparc/include/asm/sun4paddr.h b/arch/sparc/include/asm/sun4paddr.h
new file mode 100644
index 0000000..d52985f
--- /dev/null
+++ b/arch/sparc/include/asm/sun4paddr.h
@@ -0,0 +1,56 @@
+/*
+ * sun4paddr.h:  Various physical addresses on sun4 machines
+ *
+ * Copyright (C) 1997 Anton Blanchard (anton@progsoc.uts.edu.au)
+ * Copyright (C) 1998 Chris Davis (cdavis@cois.on.ca)
+ * 
+ * Now supports more sun4's
+ */
+
+#ifndef _SPARC_SUN4PADDR_H
+#define _SPARC_SUN4PADDR_H
+
+#define SUN4_IE_PHYSADDR		0xf5000000
+#define SUN4_UNUSED_PHYSADDR		0
+
+/* these work for me */
+#define SUN4_200_MEMREG_PHYSADDR	0xf4000000
+#define SUN4_200_CLOCK_PHYSADDR		0xf3000000
+#define SUN4_200_BWTWO_PHYSADDR		0xfd000000
+#define SUN4_200_ETH_PHYSADDR		0xf6000000
+#define SUN4_200_SI_PHYSADDR		0xff200000
+
+/* these were here before */
+#define SUN4_300_MEMREG_PHYSADDR	0xf4000000
+#define SUN4_300_CLOCK_PHYSADDR		0xf2000000
+#define SUN4_300_TIMER_PHYSADDR		0xef000000
+#define SUN4_300_ETH_PHYSADDR		0xf9000000
+#define SUN4_300_BWTWO_PHYSADDR		0xfb400000
+#define SUN4_300_DMA_PHYSADDR		0xfa001000
+#define SUN4_300_ESP_PHYSADDR		0xfa000000
+
+/* Are these right? */
+#define SUN4_400_MEMREG_PHYSADDR	0xf4000000
+#define SUN4_400_CLOCK_PHYSADDR		0xf2000000
+#define SUN4_400_TIMER_PHYSADDR		0xef000000
+#define SUN4_400_ETH_PHYSADDR		0xf9000000
+#define SUN4_400_BWTWO_PHYSADDR		0xfb400000
+#define SUN4_400_DMA_PHYSADDR		0xfa001000
+#define SUN4_400_ESP_PHYSADDR		0xfa000000
+
+/* 
+	these are the actual values set and used in the code. Unused items set 
+	to SUN_UNUSED_PHYSADDR 
+ */
+
+extern int sun4_memreg_physaddr; /* memory register (ecc?) */
+extern int sun4_clock_physaddr;  /* system clock */
+extern int sun4_timer_physaddr;  /* timer, where applicable */
+extern int sun4_eth_physaddr;    /* onboard ethernet (ie/le) */
+extern int sun4_si_physaddr;     /* sun3 scsi adapter */
+extern int sun4_bwtwo_physaddr;  /* onboard bw2 */
+extern int sun4_dma_physaddr;    /* scsi dma */
+extern int sun4_esp_physaddr;    /* esp scsi */
+extern int sun4_ie_physaddr;     /* interrupt enable */
+
+#endif /* !(_SPARC_SUN4PADDR_H) */
diff --git a/arch/sparc/include/asm/sun4prom.h b/arch/sparc/include/asm/sun4prom.h
new file mode 100644
index 0000000..9c8b4cb
--- /dev/null
+++ b/arch/sparc/include/asm/sun4prom.h
@@ -0,0 +1,83 @@
+/*
+ * sun4prom.h -- interface to sun4 PROM monitor.  We don't use most of this,
+ *               so most of these are just placeholders.
+ */
+
+#ifndef _SUN4PROM_H_
+#define _SUN4PROM_H_
+
+/*
+ * Although this looks similar to an romvec for a OpenProm machine, it is 
+ * actually closer to what was used in the Sun2 and Sun3.
+ *
+ * V2 entries exist only in version 2 PROMs and later, V3 in version 3 and later.
+ * 
+ * Many of the function prototypes are guesses.  Some are certainly wrong.
+ * Use with care.
+ */
+
+typedef struct {
+	char		*initSP;		/* Initial system stack ptr */
+	void		(*startmon)(void);	/* Initial PC for hardware */
+	int		*diagberr;		/* Bus err handler for diags */
+	struct linux_arguments_v0 **bootParam; /* Info for bootstrapped pgm */
+ 	unsigned int	*memorysize;		/* Usable memory in bytes */
+	unsigned char	(*getchar)(void);	/* Get char from input device */ 
+	void		(*putchar)(char);	/* Put char to output device */
+	int		(*mayget)(void);	/* Maybe get char, or -1 */
+	int		(*mayput)(int);		/* Maybe put char, or -1 */
+	unsigned char	*echo;			/* Should getchar echo? */
+	unsigned char	*insource;		/* Input source selector */
+	unsigned char	*outsink;		/* Output sink selector */
+	int		(*getkey)(void);	/* Get next key if one exists */
+	void		(*initgetkey)(void);	/* Initialize get key */
+	unsigned int	*translation;		/* Kbd translation selector */
+	unsigned char	*keybid;		/* Keyboard ID byte */
+	int		*screen_x;		/* V2: Screen x pos (r/o) */
+	int		*screen_y;		/* V2: Screen y pos (r/o) */
+	struct keybuf	*keybuf;		/* Up/down keycode buffer */
+	char		*monid;			/* Monitor version ID */
+	void		(*fbwritechar)(char);	/* Write a character to FB */
+	int		*fbAddr;		/* Address of frame buffer */
+	char		**font;			/* Font table for FB */
+	void		(*fbwritestr)(char *);	/* Write string to FB */
+	void		(*reboot)(char *);	/* e.g. reboot("sd()vmlinux") */
+	unsigned char	*linebuf;		/* The line input buffer */
+	unsigned char	**lineptr;		/* Cur pointer into linebuf */
+	int		*linesize;		/* length of line in linebuf */
+	void		(*getline)(char *);	/* Get line from user */
+	unsigned char	(*getnextchar)(void);	/* Get next char from linebuf */
+	unsigned char	(*peeknextchar)(void);	/* Peek at next char */
+	int		*fbthere;		/* =1 if frame buffer there */
+	int		(*getnum)(void);	/* Grab hex num from line */
+	int		(*printf)(char *, ...);	/* See prom_printf() instead */ 
+	void		(*printhex)(int);	/* Format N digits in hex */
+	unsigned char	*leds;			/* RAM copy of LED register */
+	void		(*setLEDs)(unsigned char *);	/* Sets LED's and RAM copy */
+	void		(*NMIaddr)(void *);	/* Addr for level 7 vector */
+	void		(*abortentry)(void);	/* Entry for keyboard abort */
+	int		*nmiclock;		/* Counts up in msec */
+	int		*FBtype;		/* Frame buffer type */
+ 	unsigned int	romvecversion;		/* Version number for this romvec */
+	struct globram  *globram;		/* monitor global variables ??? */
+	void *		kbdaddr;		/* Addr of keyboard in use */
+	int		*keyrinit;		/* ms before kbd repeat */
+	unsigned char	*keyrtick; 		/* ms between repetitions */
+	unsigned int	*memoryavail;		/* V1: Main mem usable size */
+	long		*resetaddr;		/* where to jump on a reset */
+	long		*resetmap;		/* pgmap entry for resetaddr */
+	void		(*exittomon)(void);	/* Exit from user program */
+	unsigned char	**memorybitmap;		/* V1: &{0 or &bits} */
+	void		(*setcxsegmap)(int ctxt, char *va, int pmeg);	/* Set seg in any context */
+	void		(**vector_cmd)(void *);	/* V2: Handler for 'v' cmd */
+	unsigned long	*expectedtrapsig;	/* V3: Location of the expected trap signal */
+	unsigned long	*trapvectorbasetable;	/* V3: Address of the trap vector table */
+	int		unused1;
+	int		unused2;
+	int		unused3;
+	int		unused4;
+} linux_sun4_romvec;
+
+extern linux_sun4_romvec *sun4_romvec;
+
+#endif /* _SUN4PROM_H_ */
diff --git a/arch/sparc/include/asm/sunbpp.h b/arch/sparc/include/asm/sunbpp.h
new file mode 100644
index 0000000..d81a02e
--- /dev/null
+++ b/arch/sparc/include/asm/sunbpp.h
@@ -0,0 +1,80 @@
+/*
+ * include/asm/sunbpp.h
+ */
+
+#ifndef _ASM_SPARC_SUNBPP_H
+#define _ASM_SPARC_SUNBPP_H
+
+struct bpp_regs {
+  /* DMA registers */
+  __volatile__ __u32 p_csr;		/* DMA Control/Status Register */
+  __volatile__ __u32 p_addr;		/* Address Register */
+  __volatile__ __u32 p_bcnt;		/* Byte Count Register */
+  __volatile__ __u32 p_tst_csr;		/* Test Control/Status (DMA2 only) */
+  /* Parallel Port registers */
+  __volatile__ __u16 p_hcr;		/* Hardware Configuration Register */
+  __volatile__ __u16 p_ocr;		/* Operation Configuration Register */
+  __volatile__ __u8 p_dr;		/* Parallel Data Register */
+  __volatile__ __u8 p_tcr;		/* Transfer Control Register */
+  __volatile__ __u8 p_or;		/* Output Register */
+  __volatile__ __u8 p_ir;		/* Input Register */
+  __volatile__ __u16 p_icr;		/* Interrupt Control Register */
+};
+
+/* P_HCR. Time is in increments of SBus clock. */
+#define P_HCR_TEST      0x8000      /* Allows buried counters to be read */
+#define P_HCR_DSW       0x7f00      /* Data strobe width (in ticks) */
+#define P_HCR_DDS       0x007f      /* Data setup before strobe (in ticks) */
+
+/* P_OCR. */
+#define P_OCR_MEM_CLR   0x8000
+#define P_OCR_DATA_SRC  0x4000      /* )                  */
+#define P_OCR_DS_DSEL   0x2000      /* )  Bidirectional      */
+#define P_OCR_BUSY_DSEL 0x1000      /* )    selects            */
+#define P_OCR_ACK_DSEL  0x0800      /* )                  */
+#define P_OCR_EN_DIAG   0x0400
+#define P_OCR_BUSY_OP   0x0200      /* Busy operation */
+#define P_OCR_ACK_OP    0x0100      /* Ack operation */
+#define P_OCR_SRST      0x0080      /* Reset state machines. Not selfcleaning. */
+#define P_OCR_IDLE      0x0008      /* PP data transfer state machine is idle */
+#define P_OCR_V_ILCK    0x0002      /* Versatec faded. Zebra only. */
+#define P_OCR_EN_VER    0x0001      /* Enable Versatec (0 - enable). Zebra only. */
+
+/* P_TCR */
+#define P_TCR_DIR       0x08
+#define P_TCR_BUSY      0x04
+#define P_TCR_ACK       0x02
+#define P_TCR_DS        0x01        /* Strobe */
+
+/* P_OR */
+#define P_OR_V3         0x20        /* )                 */
+#define P_OR_V2         0x10        /* ) on Zebra only   */
+#define P_OR_V1         0x08        /* )                 */
+#define P_OR_INIT       0x04
+#define P_OR_AFXN       0x02        /* Auto Feed */
+#define P_OR_SLCT_IN    0x01
+
+/* P_IR */
+#define P_IR_PE         0x04
+#define P_IR_SLCT       0x02
+#define P_IR_ERR        0x01
+
+/* P_ICR */
+#define P_DS_IRQ        0x8000      /* RW1  */
+#define P_ACK_IRQ       0x4000      /* RW1  */
+#define P_BUSY_IRQ      0x2000      /* RW1  */
+#define P_PE_IRQ        0x1000      /* RW1  */
+#define P_SLCT_IRQ      0x0800      /* RW1  */
+#define P_ERR_IRQ       0x0400      /* RW1  */
+#define P_DS_IRQ_EN     0x0200      /* RW   Always on rising edge */
+#define P_ACK_IRQ_EN    0x0100      /* RW   Always on rising edge */
+#define P_BUSY_IRP      0x0080      /* RW   1= rising edge */
+#define P_BUSY_IRQ_EN   0x0040      /* RW   */
+#define P_PE_IRP        0x0020      /* RW   1= rising edge */
+#define P_PE_IRQ_EN     0x0010      /* RW   */
+#define P_SLCT_IRP      0x0008      /* RW   1= rising edge */
+#define P_SLCT_IRQ_EN   0x0004      /* RW   */
+#define P_ERR_IRP       0x0002      /* RW1  1= rising edge */
+#define P_ERR_IRQ_EN    0x0001      /* RW   */
+
+#endif /* !(_ASM_SPARC_SUNBPP_H) */
diff --git a/arch/sparc/include/asm/swift.h b/arch/sparc/include/asm/swift.h
new file mode 100644
index 0000000..e535061
--- /dev/null
+++ b/arch/sparc/include/asm/swift.h
@@ -0,0 +1,106 @@
+/* swift.h: Specific definitions for the _broken_ Swift SRMMU
+ *          MMU module.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SWIFT_H
+#define _SPARC_SWIFT_H
+
+/* Swift is so brain damaged, here is the mmu control register. */
+#define SWIFT_ST       0x00800000   /* SW tablewalk enable */
+#define SWIFT_WP       0x00400000   /* Watchpoint enable   */
+
+/* Branch folding (buggy, disable on production systems!)  */
+#define SWIFT_BF       0x00200000
+#define SWIFT_PMC      0x00180000   /* Page mode control   */
+#define SWIFT_PE       0x00040000   /* Parity enable       */
+#define SWIFT_PC       0x00020000   /* Parity control      */
+#define SWIFT_AP       0x00010000   /* Graphics page mode control (TCX/SX) */
+#define SWIFT_AC       0x00008000   /* Alternate Cacheability (see viking.h) */
+#define SWIFT_BM       0x00004000   /* Boot mode */
+#define SWIFT_RC       0x00003c00   /* DRAM refresh control */
+#define SWIFT_IE       0x00000200   /* Instruction cache enable */
+#define SWIFT_DE       0x00000100   /* Data cache enable */
+#define SWIFT_SA       0x00000080   /* Store Allocate */
+#define SWIFT_NF       0x00000002   /* No fault mode */
+#define SWIFT_EN       0x00000001   /* MMU enable */
+
+/* Bits [13:5] select one of 512 instruction cache tags */
+static inline void swift_inv_insn_tag(unsigned long addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (addr), "i" (ASI_M_TXTC_TAG)
+			     : "memory");
+}
+
+/* Bits [12:4] select one of 512 data cache tags */
+static inline void swift_inv_data_tag(unsigned long addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (addr), "i" (ASI_M_DATAC_TAG)
+			     : "memory");
+}
+
+static inline void swift_flush_dcache(void)
+{
+	unsigned long addr;
+
+	for (addr = 0; addr < 0x2000; addr += 0x10)
+		swift_inv_data_tag(addr);
+}
+
+static inline void swift_flush_icache(void)
+{
+	unsigned long addr;
+
+	for (addr = 0; addr < 0x4000; addr += 0x20)
+		swift_inv_insn_tag(addr);
+}
+
+static inline void swift_idflash_clear(void)
+{
+	unsigned long addr;
+
+	for (addr = 0; addr < 0x2000; addr += 0x10) {
+		swift_inv_insn_tag(addr<<1);
+		swift_inv_data_tag(addr);
+	}
+}
+
+/* Swift is so broken, it isn't even safe to use the following. */
+static inline void swift_flush_page(unsigned long page)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (page), "i" (ASI_M_FLUSH_PAGE)
+			     : "memory");
+}
+
+static inline void swift_flush_segment(unsigned long addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (addr), "i" (ASI_M_FLUSH_SEG)
+			     : "memory");
+}
+
+static inline void swift_flush_region(unsigned long addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (addr), "i" (ASI_M_FLUSH_REGION)
+			     : "memory");
+}
+
+static inline void swift_flush_context(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_FLUSH_CTX)
+			     : "memory");
+}
+
+#endif /* !(_SPARC_SWIFT_H) */
diff --git a/arch/sparc/include/asm/syscall.h b/arch/sparc/include/asm/syscall.h
new file mode 100644
index 0000000..7486c60
--- /dev/null
+++ b/arch/sparc/include/asm/syscall.h
@@ -0,0 +1,120 @@
+#ifndef __ASM_SPARC_SYSCALL_H
+#define __ASM_SPARC_SYSCALL_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+
+/* The system call number is given by the user in %g1 */
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	int syscall_p = pt_regs_is_syscall(regs);
+
+	return (syscall_p ? regs->u_regs[UREG_G1] : -1L);
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	/* XXX This needs some thought.  On Sparc we don't
+	 * XXX save away the original %o0 value somewhere.
+	 * XXX Instead we hold it in register %l5 at the top
+	 * XXX level trap frame and pass this down to the signal
+	 * XXX dispatch code which is the only place that value
+	 * XXX ever was needed.
+	 */
+}
+
+#ifdef CONFIG_SPARC32
+static inline bool syscall_has_error(struct pt_regs *regs)
+{
+	return (regs->psr & PSR_C) ? true : false;
+}
+static inline void syscall_set_error(struct pt_regs *regs)
+{
+	regs->psr |= PSR_C;
+}
+static inline void syscall_clear_error(struct pt_regs *regs)
+{
+	regs->psr &= ~PSR_C;
+}
+#else
+static inline bool syscall_has_error(struct pt_regs *regs)
+{
+	return (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY)) ? true : false;
+}
+static inline void syscall_set_error(struct pt_regs *regs)
+{
+	regs->tstate |= (TSTATE_XCARRY | TSTATE_ICARRY);
+}
+static inline void syscall_clear_error(struct pt_regs *regs)
+{
+	regs->tstate &= ~(TSTATE_XCARRY | TSTATE_ICARRY);
+}
+#endif
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	long val = regs->u_regs[UREG_I0];
+
+	return (syscall_has_error(regs) ? -val : 0);
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	long val = regs->u_regs[UREG_I0];
+
+	return val;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	if (error) {
+		syscall_set_error(regs);
+		regs->u_regs[UREG_I0] = -error;
+	} else {
+		syscall_clear_error(regs);
+		regs->u_regs[UREG_I0] = val;
+	}
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	int zero_extend = 0;
+	unsigned int j;
+
+#ifdef CONFIG_SPARC64
+	if (test_tsk_thread_flag(task, TIF_32BIT))
+		zero_extend = 1;
+#endif
+
+	for (j = 0; j < n; j++) {
+		unsigned long val = regs->u_regs[UREG_I0 + i + j];
+
+		if (zero_extend)
+			args[j] = (u32) val;
+		else
+			args[j] = val;
+	}
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	unsigned int j;
+
+	for (j = 0; j < n; j++)
+		regs->u_regs[UREG_I0 + i + j] = args[j];
+}
+
+#endif /* __ASM_SPARC_SYSCALL_H */
diff --git a/arch/sparc/include/asm/syscalls.h b/arch/sparc/include/asm/syscalls.h
new file mode 100644
index 0000000..45a43f6
--- /dev/null
+++ b/arch/sparc/include/asm/syscalls.h
@@ -0,0 +1,13 @@
+#ifndef _SPARC64_SYSCALLS_H
+#define _SPARC64_SYSCALLS_H
+
+struct pt_regs;
+
+extern asmlinkage long sparc_do_fork(unsigned long clone_flags,
+				     unsigned long stack_start,
+				     struct pt_regs *regs,
+				     unsigned long stack_size);
+
+extern asmlinkage int sparc_execve(struct pt_regs *regs);
+
+#endif /* _SPARC64_SYSCALLS_H */
diff --git a/arch/sparc/include/asm/sysen.h b/arch/sparc/include/asm/sysen.h
new file mode 100644
index 0000000..6af34ab
--- /dev/null
+++ b/arch/sparc/include/asm/sysen.h
@@ -0,0 +1,15 @@
+/*
+ * sysen.h:  Bit fields within the "System Enable" register accessed via
+ *           the ASI_CONTROL address space at address AC_SYSENABLE.
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SYSEN_H
+#define _SPARC_SYSEN_H
+
+#define SENABLE_DVMA   0x20   /* enable dvma transfers */
+#define SENABLE_CACHE  0x10   /* enable VAC cache */
+#define SENABLE_RESET  0x04   /* reset whole machine, danger Will Robinson */
+
+#endif /* _SPARC_SYSEN_H */
diff --git a/arch/sparc/include/asm/system.h b/arch/sparc/include/asm/system.h
new file mode 100644
index 0000000..7944a7c
--- /dev/null
+++ b/arch/sparc/include/asm/system.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SYSTEM_H
+#define ___ASM_SPARC_SYSTEM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/system_64.h>
+#else
+#include <asm/system_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/system_32.h b/arch/sparc/include/asm/system_32.h
new file mode 100644
index 0000000..b4b0244
--- /dev/null
+++ b/arch/sparc/include/asm/system_32.h
@@ -0,0 +1,288 @@
+#ifndef __SPARC_SYSTEM_H
+#define __SPARC_SYSTEM_H
+
+#include <linux/kernel.h>
+#include <linux/threads.h>	/* NR_CPUS */
+#include <linux/thread_info.h>
+
+#include <asm/page.h>
+#include <asm/psr.h>
+#include <asm/ptrace.h>
+#include <asm/btfixup.h>
+#include <asm/smp.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/irqflags.h>
+
+/*
+ * Sparc (general) CPU types
+ */
+enum sparc_cpu {
+  sun4        = 0x00,
+  sun4c       = 0x01,
+  sun4m       = 0x02,
+  sun4d       = 0x03,
+  sun4e       = 0x04,
+  sun4u       = 0x05, /* V8 ploos ploos */
+  sun_unknown = 0x06,
+  ap1000      = 0x07, /* almost a sun4m */
+};
+
+/* Really, userland should not be looking at any of this... */
+#ifdef __KERNEL__
+
+extern enum sparc_cpu sparc_cpu_model;
+
+#ifndef CONFIG_SUN4
+#define ARCH_SUN4C_SUN4 (sparc_cpu_model==sun4c)
+#define ARCH_SUN4 0
+#else
+#define ARCH_SUN4C_SUN4 1
+#define ARCH_SUN4 1
+#endif
+
+#define SUN4M_NCPUS            4              /* Architectural limit of sun4m. */
+
+extern char reboot_command[];
+
+extern struct thread_info *current_set[NR_CPUS];
+
+extern unsigned long empty_bad_page;
+extern unsigned long empty_bad_page_table;
+extern unsigned long empty_zero_page;
+
+extern void sun_do_break(void);
+extern int serial_console;
+extern int stop_a_enabled;
+
+static inline int con_is_present(void)
+{
+	return serial_console ? 0 : 1;
+}
+
+/* When a context switch happens we must flush all user windows so that
+ * the windows of the current process are flushed onto its stack. This
+ * way the windows are all clean for the next process and the stack
+ * frames are up to date.
+ */
+extern void flush_user_windows(void);
+extern void kill_user_windows(void);
+extern void synchronize_user_stack(void);
+extern void fpsave(unsigned long *fpregs, unsigned long *fsr,
+		   void *fpqueue, unsigned long *fpqdepth);
+
+#ifdef CONFIG_SMP
+#define SWITCH_ENTER(prv) \
+	do {			\
+	if (test_tsk_thread_flag(prv, TIF_USEDFPU)) { \
+		put_psr(get_psr() | PSR_EF); \
+		fpsave(&(prv)->thread.float_regs[0], &(prv)->thread.fsr, \
+		       &(prv)->thread.fpqueue[0], &(prv)->thread.fpqdepth); \
+		clear_tsk_thread_flag(prv, TIF_USEDFPU); \
+		(prv)->thread.kregs->psr &= ~PSR_EF; \
+	} \
+	} while(0)
+
+#define SWITCH_DO_LAZY_FPU(next)	/* */
+#else
+#define SWITCH_ENTER(prv)		/* */
+#define SWITCH_DO_LAZY_FPU(nxt)	\
+	do {			\
+	if (last_task_used_math != (nxt))		\
+		(nxt)->thread.kregs->psr&=~PSR_EF;	\
+	} while(0)
+#endif
+
+extern void flushw_all(void);
+
+/*
+ * Flush windows so that the VM switch which follows
+ * would not pull the stack from under us.
+ *
+ * SWITCH_ENTER and SWITH_DO_LAZY_FPU do not work yet (e.g. SMP does not work)
+ * XXX WTF is the above comment? Found in late teen 2.4.x.
+ */
+#define prepare_arch_switch(next) do { \
+	__asm__ __volatile__( \
+	".globl\tflush_patch_switch\nflush_patch_switch:\n\t" \
+	"save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \
+	"save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \
+	"save %sp, -0x40, %sp\n\t" \
+	"restore; restore; restore; restore; restore; restore; restore"); \
+} while(0)
+
+	/* Much care has gone into this code, do not touch it.
+	 *
+	 * We need to loadup regs l0/l1 for the newly forked child
+	 * case because the trap return path relies on those registers
+	 * holding certain values, gcc is told that they are clobbered.
+	 * Gcc needs registers for 3 values in and 1 value out, so we
+	 * clobber every non-fixed-usage register besides l2/l3/o4/o5.  -DaveM
+	 *
+	 * Hey Dave, that do not touch sign is too much of an incentive
+	 * - Anton & Pete
+	 */
+#define switch_to(prev, next, last) do {						\
+	SWITCH_ENTER(prev);								\
+	SWITCH_DO_LAZY_FPU(next);							\
+	cpu_set(smp_processor_id(), next->active_mm->cpu_vm_mask);			\
+	__asm__ __volatile__(								\
+	"sethi	%%hi(here - 0x8), %%o7\n\t"						\
+	"mov	%%g6, %%g3\n\t"								\
+	"or	%%o7, %%lo(here - 0x8), %%o7\n\t"					\
+	"rd	%%psr, %%g4\n\t"							\
+	"std	%%sp, [%%g6 + %4]\n\t"							\
+	"rd	%%wim, %%g5\n\t"							\
+	"wr	%%g4, 0x20, %%psr\n\t"							\
+	"nop\n\t"									\
+	"std	%%g4, [%%g6 + %3]\n\t"							\
+	"ldd	[%2 + %3], %%g4\n\t"							\
+	"mov	%2, %%g6\n\t"								\
+	".globl	patchme_store_new_current\n"						\
+"patchme_store_new_current:\n\t"							\
+	"st	%2, [%1]\n\t"								\
+	"wr	%%g4, 0x20, %%psr\n\t"							\
+	"nop\n\t"									\
+	"nop\n\t"									\
+	"nop\n\t"	/* LEON needs all 3 nops: load to %sp depends on CWP. */		\
+	"ldd	[%%g6 + %4], %%sp\n\t"							\
+	"wr	%%g5, 0x0, %%wim\n\t"							\
+	"ldd	[%%sp + 0x00], %%l0\n\t"						\
+	"ldd	[%%sp + 0x38], %%i6\n\t"						\
+	"wr	%%g4, 0x0, %%psr\n\t"							\
+	"nop\n\t"									\
+	"nop\n\t"									\
+	"jmpl	%%o7 + 0x8, %%g0\n\t"							\
+	" ld	[%%g3 + %5], %0\n\t"							\
+	"here:\n"									\
+        : "=&r" (last)									\
+        : "r" (&(current_set[hard_smp_processor_id()])),	\
+	  "r" (task_thread_info(next)),				\
+	  "i" (TI_KPSR),					\
+	  "i" (TI_KSP),						\
+	  "i" (TI_TASK)						\
+	:       "g1", "g2", "g3", "g4", "g5",       "g7",	\
+	  "l0", "l1",       "l3", "l4", "l5", "l6", "l7",	\
+	  "i0", "i1", "i2", "i3", "i4", "i5",			\
+	  "o0", "o1", "o2", "o3",                   "o7");	\
+	} while(0)
+
+/* XXX Change this if we ever use a PSO mode kernel. */
+#define mb()	__asm__ __volatile__ ("" : : : "memory")
+#define rmb()	mb()
+#define wmb()	mb()
+#define read_barrier_depends()	do { } while(0)
+#define set_mb(__var, __value)  do { __var = __value; mb(); } while(0)
+#define smp_mb()	__asm__ __volatile__("":::"memory")
+#define smp_rmb()	__asm__ __volatile__("":::"memory")
+#define smp_wmb()	__asm__ __volatile__("":::"memory")
+#define smp_read_barrier_depends()	do { } while(0)
+
+#define nop() __asm__ __volatile__ ("nop")
+
+/* This has special calling conventions */
+#ifndef CONFIG_SMP
+BTFIXUPDEF_CALL(void, ___xchg32, void)
+#endif
+
+static inline unsigned long xchg_u32(__volatile__ unsigned long *m, unsigned long val)
+{
+#ifdef CONFIG_SMP
+	__asm__ __volatile__("swap [%2], %0"
+			     : "=&r" (val)
+			     : "0" (val), "r" (m)
+			     : "memory");
+	return val;
+#else
+	register unsigned long *ptr asm("g1");
+	register unsigned long ret asm("g2");
+
+	ptr = (unsigned long *) m;
+	ret = val;
+
+	/* Note: this is magic and the nop there is
+	   really needed. */
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___f____xchg32\n\t"
+	" nop\n\t"
+	: "=&r" (ret)
+	: "0" (ret), "r" (ptr)
+	: "g3", "g4", "g7", "memory", "cc");
+
+	return ret;
+#endif
+}
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+extern void __xchg_called_with_bad_pointer(void);
+
+static inline unsigned long __xchg(unsigned long x, __volatile__ void * ptr, int size)
+{
+	switch (size) {
+	case 4:
+		return xchg_u32(ptr, x);
+	};
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+/* Emulate cmpxchg() the same way we emulate atomics,
+ * by hashing the object address and indexing into an array
+ * of spinlocks to get a bit of performance...
+ *
+ * See arch/sparc/lib/atomic32.c for implementation.
+ *
+ * Cribbed from <asm-parisc/atomic.h>
+ */
+#define __HAVE_ARCH_CMPXCHG	1
+
+/* bug catcher for when unsupported size is used - won't link */
+extern void __cmpxchg_called_with_bad_pointer(void);
+/* we only need to support cmpxchg of a u32 on sparc */
+extern unsigned long __cmpxchg_u32(volatile u32 *m, u32 old, u32 new_);
+
+/* don't worry...optimizer will get rid of most of this */
+static inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new_, int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32((u32 *)ptr, (u32)old, (u32)new_);
+	default:
+		__cmpxchg_called_with_bad_pointer();
+		break;
+	}
+	return old;
+}
+
+#define cmpxchg(ptr, o, n)						\
+({									\
+	__typeof__(*(ptr)) _o_ = (o);					\
+	__typeof__(*(ptr)) _n_ = (n);					\
+	(__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,	\
+			(unsigned long)_n_, sizeof(*(ptr)));		\
+})
+
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n)				  	       \
+	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+			(unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noreturn));
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#define arch_align_stack(x) (x)
+
+#endif /* !(__SPARC_SYSTEM_H) */
diff --git a/arch/sparc/include/asm/system_64.h b/arch/sparc/include/asm/system_64.h
new file mode 100644
index 0000000..db9e742
--- /dev/null
+++ b/arch/sparc/include/asm/system_64.h
@@ -0,0 +1,355 @@
+#ifndef __SPARC64_SYSTEM_H
+#define __SPARC64_SYSTEM_H
+
+#include <asm/ptrace.h>
+#include <asm/processor.h>
+#include <asm/visasm.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/irqflags.h>
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * Sparc (general) CPU types
+ */
+enum sparc_cpu {
+  sun4        = 0x00,
+  sun4c       = 0x01,
+  sun4m       = 0x02,
+  sun4d       = 0x03,
+  sun4e       = 0x04,
+  sun4u       = 0x05, /* V8 ploos ploos */
+  sun_unknown = 0x06,
+  ap1000      = 0x07, /* almost a sun4m */
+};
+
+#define sparc_cpu_model sun4u
+
+/* This cannot ever be a sun4c nor sun4 :) That's just history. */
+#define ARCH_SUN4C_SUN4 0
+#define ARCH_SUN4 0
+
+extern char reboot_command[];
+
+/* These are here in an effort to more fully work around Spitfire Errata
+ * #51.  Essentially, if a memory barrier occurs soon after a mispredicted
+ * branch, the chip can stop executing instructions until a trap occurs.
+ * Therefore, if interrupts are disabled, the chip can hang forever.
+ *
+ * It used to be believed that the memory barrier had to be right in the
+ * delay slot, but a case has been traced recently wherein the memory barrier
+ * was one instruction after the branch delay slot and the chip still hung.
+ * The offending sequence was the following in sym_wakeup_done() of the
+ * sym53c8xx_2 driver:
+ *
+ *	call	sym_ccb_from_dsa, 0
+ *	 movge	%icc, 0, %l0
+ *	brz,pn	%o0, .LL1303
+ *	 mov	%o0, %l2
+ *	membar	#LoadLoad
+ *
+ * The branch has to be mispredicted for the bug to occur.  Therefore, we put
+ * the memory barrier explicitly into a "branch always, predicted taken"
+ * delay slot to avoid the problem case.
+ */
+#define membar_safe(type) \
+do {	__asm__ __volatile__("ba,pt	%%xcc, 1f\n\t" \
+			     " membar	" type "\n" \
+			     "1:\n" \
+			     : : : "memory"); \
+} while (0)
+
+#define mb()	\
+	membar_safe("#LoadLoad | #LoadStore | #StoreStore | #StoreLoad")
+#define rmb()	\
+	membar_safe("#LoadLoad")
+#define wmb()	\
+	membar_safe("#StoreStore")
+#define membar_storeload() \
+	membar_safe("#StoreLoad")
+#define membar_storeload_storestore() \
+	membar_safe("#StoreLoad | #StoreStore")
+#define membar_storeload_loadload() \
+	membar_safe("#StoreLoad | #LoadLoad")
+#define membar_storestore_loadstore() \
+	membar_safe("#StoreStore | #LoadStore")
+
+#endif
+
+#define nop() 		__asm__ __volatile__ ("nop")
+
+#define read_barrier_depends()		do { } while(0)
+#define set_mb(__var, __value) \
+	do { __var = __value; membar_storeload_storestore(); } while(0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	__asm__ __volatile__("":::"memory")
+#define smp_rmb()	__asm__ __volatile__("":::"memory")
+#define smp_wmb()	__asm__ __volatile__("":::"memory")
+#define smp_read_barrier_depends()	do { } while(0)
+#endif
+
+#define flushi(addr)	__asm__ __volatile__ ("flush %0" : : "r" (addr) : "memory")
+
+#define flushw_all()	__asm__ __volatile__("flushw")
+
+/* Performance counter register access. */
+#define read_pcr(__p)  __asm__ __volatile__("rd	%%pcr, %0" : "=r" (__p))
+#define write_pcr(__p) __asm__ __volatile__("wr	%0, 0x0, %%pcr" : : "r" (__p))
+#define read_pic(__p)  __asm__ __volatile__("rd %%pic, %0" : "=r" (__p))
+
+/* Blackbird errata workaround.  See commentary in
+ * arch/sparc64/kernel/smp.c:smp_percpu_timer_interrupt()
+ * for more information.
+ */
+#define reset_pic()    						\
+	__asm__ __volatile__("ba,pt	%xcc, 99f\n\t"		\
+			     ".align	64\n"			\
+			  "99:wr	%g0, 0x0, %pic\n\t"	\
+			     "rd	%pic, %g0")
+
+#ifndef __ASSEMBLY__
+
+extern void sun_do_break(void);
+extern int stop_a_enabled;
+
+extern void fault_in_user_windows(void);
+extern void synchronize_user_stack(void);
+
+extern void __flushw_user(void);
+#define flushw_user() __flushw_user()
+
+#define flush_user_windows flushw_user
+#define flush_register_windows flushw_all
+
+/* Don't hold the runqueue lock over context switch */
+#define __ARCH_WANT_UNLOCKED_CTXSW
+#define prepare_arch_switch(next)		\
+do {						\
+	flushw_all();				\
+} while (0)
+
+	/* See what happens when you design the chip correctly?
+	 *
+	 * We tell gcc we clobber all non-fixed-usage registers except
+	 * for l0/l1.  It will use one for 'next' and the other to hold
+	 * the output value of 'last'.  'next' is not referenced again
+	 * past the invocation of switch_to in the scheduler, so we need
+	 * not preserve it's value.  Hairy, but it lets us remove 2 loads
+	 * and 2 stores in this critical code path.  -DaveM
+	 */
+#define switch_to(prev, next, last)					\
+do {	if (test_thread_flag(TIF_PERFCTR)) {				\
+		unsigned long __tmp;					\
+		read_pcr(__tmp);					\
+		current_thread_info()->pcr_reg = __tmp;			\
+		read_pic(__tmp);					\
+		current_thread_info()->kernel_cntd0 += (unsigned int)(__tmp);\
+		current_thread_info()->kernel_cntd1 += ((__tmp) >> 32);	\
+	}								\
+	flush_tlb_pending();						\
+	save_and_clear_fpu();						\
+	/* If you are tempted to conditionalize the following */	\
+	/* so that ASI is only written if it changes, think again. */	\
+	__asm__ __volatile__("wr %%g0, %0, %%asi"			\
+	: : "r" (__thread_flag_byte_ptr(task_thread_info(next))[TI_FLAG_BYTE_CURRENT_DS]));\
+	trap_block[current_thread_info()->cpu].thread =			\
+		task_thread_info(next);					\
+	__asm__ __volatile__(						\
+	"mov	%%g4, %%g7\n\t"						\
+	"stx	%%i6, [%%sp + 2047 + 0x70]\n\t"				\
+	"stx	%%i7, [%%sp + 2047 + 0x78]\n\t"				\
+	"rdpr	%%wstate, %%o5\n\t"					\
+	"stx	%%o6, [%%g6 + %6]\n\t"					\
+	"stb	%%o5, [%%g6 + %5]\n\t"					\
+	"rdpr	%%cwp, %%o5\n\t"					\
+	"stb	%%o5, [%%g6 + %8]\n\t"					\
+	"mov	%4, %%g6\n\t"						\
+	"ldub	[%4 + %8], %%g1\n\t"					\
+	"wrpr	%%g1, %%cwp\n\t"					\
+	"ldx	[%%g6 + %6], %%o6\n\t"					\
+	"ldub	[%%g6 + %5], %%o5\n\t"					\
+	"ldub	[%%g6 + %7], %%o7\n\t"					\
+	"wrpr	%%o5, 0x0, %%wstate\n\t"				\
+	"ldx	[%%sp + 2047 + 0x70], %%i6\n\t"				\
+	"ldx	[%%sp + 2047 + 0x78], %%i7\n\t"				\
+	"ldx	[%%g6 + %9], %%g4\n\t"					\
+	"brz,pt %%o7, switch_to_pc\n\t"					\
+	" mov	%%g7, %0\n\t"						\
+	"sethi	%%hi(ret_from_syscall), %%g1\n\t"			\
+	"jmpl	%%g1 + %%lo(ret_from_syscall), %%g0\n\t"		\
+	" nop\n\t"							\
+	".globl switch_to_pc\n\t"					\
+	"switch_to_pc:\n\t"						\
+	: "=&r" (last), "=r" (current), "=r" (current_thread_info_reg),	\
+	  "=r" (__local_per_cpu_offset)					\
+	: "0" (task_thread_info(next)),					\
+	  "i" (TI_WSTATE), "i" (TI_KSP), "i" (TI_NEW_CHILD),            \
+	  "i" (TI_CWP), "i" (TI_TASK)					\
+	: "cc",								\
+	        "g1", "g2", "g3",                   "g7",		\
+	        "l1", "l2", "l3", "l4", "l5", "l6", "l7",		\
+	  "i0", "i1", "i2", "i3", "i4", "i5",				\
+	  "o0", "o1", "o2", "o3", "o4", "o5",       "o7");		\
+	/* If you fuck with this, update ret_from_syscall code too. */	\
+	if (test_thread_flag(TIF_PERFCTR)) {				\
+		write_pcr(current_thread_info()->pcr_reg);		\
+		reset_pic();						\
+	}								\
+} while(0)
+
+static inline unsigned long xchg32(__volatile__ unsigned int *m, unsigned int val)
+{
+	unsigned long tmp1, tmp2;
+
+	__asm__ __volatile__(
+"	membar		#StoreLoad | #LoadLoad\n"
+"	mov		%0, %1\n"
+"1:	lduw		[%4], %2\n"
+"	cas		[%4], %2, %0\n"
+"	cmp		%2, %0\n"
+"	bne,a,pn	%%icc, 1b\n"
+"	 mov		%1, %0\n"
+"	membar		#StoreLoad | #StoreStore\n"
+	: "=&r" (val), "=&r" (tmp1), "=&r" (tmp2)
+	: "0" (val), "r" (m)
+	: "cc", "memory");
+	return val;
+}
+
+static inline unsigned long xchg64(__volatile__ unsigned long *m, unsigned long val)
+{
+	unsigned long tmp1, tmp2;
+
+	__asm__ __volatile__(
+"	membar		#StoreLoad | #LoadLoad\n"
+"	mov		%0, %1\n"
+"1:	ldx		[%4], %2\n"
+"	casx		[%4], %2, %0\n"
+"	cmp		%2, %0\n"
+"	bne,a,pn	%%xcc, 1b\n"
+"	 mov		%1, %0\n"
+"	membar		#StoreLoad | #StoreStore\n"
+	: "=&r" (val), "=&r" (tmp1), "=&r" (tmp2)
+	: "0" (val), "r" (m)
+	: "cc", "memory");
+	return val;
+}
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+extern void __xchg_called_with_bad_pointer(void);
+
+static inline unsigned long __xchg(unsigned long x, __volatile__ void * ptr,
+				       int size)
+{
+	switch (size) {
+	case 4:
+		return xchg32(ptr, x);
+	case 8:
+		return xchg64(ptr, x);
+	};
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noreturn));
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long
+__cmpxchg_u32(volatile int *m, int old, int new)
+{
+	__asm__ __volatile__("membar #StoreLoad | #LoadLoad\n"
+			     "cas [%2], %3, %0\n\t"
+			     "membar #StoreLoad | #StoreStore"
+			     : "=&r" (new)
+			     : "0" (new), "r" (m), "r" (old)
+			     : "memory");
+
+	return new;
+}
+
+static inline unsigned long
+__cmpxchg_u64(volatile long *m, unsigned long old, unsigned long new)
+{
+	__asm__ __volatile__("membar #StoreLoad | #LoadLoad\n"
+			     "casx [%2], %3, %0\n\t"
+			     "membar #StoreLoad | #StoreStore"
+			     : "=&r" (new)
+			     : "0" (new), "r" (m), "r" (old)
+			     : "memory");
+
+	return new;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid cmpxchg().  */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
+{
+	switch (size) {
+		case 4:
+			return __cmpxchg_u32(ptr, old, new);
+		case 8:
+			return __cmpxchg_u64(ptr, old, new);
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+#define cmpxchg(ptr,o,n)						 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+				      unsigned long old,
+				      unsigned long new, int size)
+{
+	switch (size) {
+	case 4:
+	case 8:	return __cmpxchg(ptr, old, new, size);
+	default:
+		return __cmpxchg_local_generic(ptr, old, new, size);
+	}
+
+	return old;
+}
+
+#define cmpxchg_local(ptr, o, n)				  	\
+	((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o),	\
+			(unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n)					\
+  ({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg_local((ptr), (o), (n));					\
+  })
+
+#endif /* !(__ASSEMBLY__) */
+
+#define arch_align_stack(x) (x)
+
+#endif /* !(__SPARC64_SYSTEM_H) */
diff --git a/arch/sparc/include/asm/termbits.h b/arch/sparc/include/asm/termbits.h
new file mode 100644
index 0000000..d6ca3e2
--- /dev/null
+++ b/arch/sparc/include/asm/termbits.h
@@ -0,0 +1,266 @@
+#ifndef _SPARC_TERMBITS_H
+#define _SPARC_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char   cc_t;
+typedef unsigned int    speed_t;
+
+#if defined(__sparc__) && defined(__arch64__)
+typedef unsigned int    tcflag_t;
+#else
+typedef unsigned long   tcflag_t;
+#endif
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+#define NCCS 17
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+#ifdef __KERNEL__
+#define SIZEOF_USER_TERMIOS sizeof (struct termios) - (2*sizeof (cc_t))
+	cc_t _x_cc[2];                  /* We need them to hold vmin/vtime */
+#endif
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	cc_t _x_cc[2];                  /* padding to match ktermios */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	cc_t _x_cc[2];                  /* We need them to hold vmin/vtime */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR    0
+#define VQUIT    1
+#define VERASE   2
+#define VKILL    3
+#define VEOF     4
+#define VEOL     5
+#define VEOL2    6
+#define VSWTC    7
+#define VSTART   8
+#define VSTOP    9
+
+
+
+#define VSUSP    10
+#define VDSUSP   11  /* SunOS POSIX nicety I do believe... */
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE  14
+#define VLNEXT   15
+
+/* Kernel keeps vmin/vtime separated, user apps assume vmin/vtime is
+ * shared with eof/eol
+ */
+#ifdef __KERNEL__
+#define VMIN     16
+#define VTIME    17
+#else
+#define VMIN     VEOF
+#define VTIME    VEOL
+#endif
+
+/* c_iflag bits */
+#define IGNBRK	0x00000001
+#define BRKINT	0x00000002
+#define IGNPAR	0x00000004
+#define PARMRK	0x00000008
+#define INPCK	0x00000010
+#define ISTRIP	0x00000020
+#define INLCR	0x00000040
+#define IGNCR	0x00000080
+#define ICRNL	0x00000100
+#define IUCLC	0x00000200
+#define IXON	0x00000400
+#define IXANY	0x00000800
+#define IXOFF	0x00001000
+#define IMAXBEL	0x00002000
+#define IUTF8   0x00004000
+
+/* c_oflag bits */
+#define OPOST	0x00000001
+#define OLCUC	0x00000002
+#define ONLCR	0x00000004
+#define OCRNL	0x00000008
+#define ONOCR	0x00000010
+#define ONLRET	0x00000020
+#define OFILL	0x00000040
+#define OFDEL	0x00000080
+#define NLDLY	0x00000100
+#define   NL0	0x00000000
+#define   NL1	0x00000100
+#define CRDLY	0x00000600
+#define   CR0	0x00000000
+#define   CR1	0x00000200
+#define   CR2	0x00000400
+#define   CR3	0x00000600
+#define TABDLY	0x00001800
+#define   TAB0	0x00000000
+#define   TAB1	0x00000800
+#define   TAB2	0x00001000
+#define   TAB3	0x00001800
+#define   XTABS	0x00001800
+#define BSDLY	0x00002000
+#define   BS0	0x00000000
+#define   BS1	0x00002000
+#define VTDLY	0x00004000
+#define   VT0	0x00000000
+#define   VT1	0x00004000
+#define FFDLY	0x00008000
+#define   FF0	0x00000000
+#define   FF1	0x00008000
+#define PAGEOUT 0x00010000  /* SUNOS specific */
+#define WRAP    0x00020000  /* SUNOS specific */
+
+/* c_cflag bit meaning */
+#define CBAUD	  0x0000100f
+#define  B0	  0x00000000   /* hang up */
+#define  B50	  0x00000001
+#define  B75	  0x00000002
+#define  B110	  0x00000003
+#define  B134	  0x00000004
+#define  B150	  0x00000005
+#define  B200	  0x00000006
+#define  B300	  0x00000007
+#define  B600	  0x00000008
+#define  B1200	  0x00000009
+#define  B1800	  0x0000000a
+#define  B2400	  0x0000000b
+#define  B4800	  0x0000000c
+#define  B9600	  0x0000000d
+#define  B19200	  0x0000000e
+#define  B38400	  0x0000000f
+#define EXTA      B19200
+#define EXTB      B38400
+#define  CSIZE    0x00000030
+#define   CS5	  0x00000000
+#define   CS6	  0x00000010
+#define   CS7	  0x00000020
+#define   CS8	  0x00000030
+#define CSTOPB	  0x00000040
+#define CREAD	  0x00000080
+#define PARENB	  0x00000100
+#define PARODD	  0x00000200
+#define HUPCL	  0x00000400
+#define CLOCAL	  0x00000800
+#define CBAUDEX   0x00001000
+/* We'll never see these speeds with the Zilogs, but for completeness... */
+#define  BOTHER   0x00001000
+#define  B57600   0x00001001
+#define  B115200  0x00001002
+#define  B230400  0x00001003
+#define  B460800  0x00001004
+/* This is what we can do with the Zilogs. */
+#define  B76800   0x00001005
+/* This is what we can do with the SAB82532. */
+#define  B153600  0x00001006
+#define  B307200  0x00001007
+#define  B614400  0x00001008
+#define  B921600  0x00001009
+/* And these are the rest... */
+#define  B500000  0x0000100a
+#define  B576000  0x0000100b
+#define B1000000  0x0000100c
+#define B1152000  0x0000100d
+#define B1500000  0x0000100e
+#define B2000000  0x0000100f
+/* These have totally bogus values and nobody uses them
+   so far. Later on we'd have to use say 0x10000x and
+   adjust CBAUD constant and drivers accordingly.
+#define B2500000  0x00001010
+#define B3000000  0x00001011
+#define B3500000  0x00001012
+#define B4000000  0x00001013  */
+#define CIBAUD	  0x100f0000  /* input baud rate (not used) */
+#define CMSPAR	  0x40000000  /* mark or space (stick) parity */
+#define CRTSCTS	  0x80000000  /* flow control */
+
+#define IBSHIFT	  16		/* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG	0x00000001
+#define ICANON	0x00000002
+#define XCASE	0x00000004
+#define ECHO	0x00000008
+#define ECHOE	0x00000010
+#define ECHOK	0x00000020
+#define ECHONL	0x00000040
+#define NOFLSH	0x00000080
+#define TOSTOP	0x00000100
+#define ECHOCTL	0x00000200
+#define ECHOPRT	0x00000400
+#define ECHOKE	0x00000800
+#define DEFECHO 0x00001000  /* SUNOS thing, what is it? */
+#define FLUSHO	0x00002000
+#define PENDIN	0x00004000
+#define IEXTEN	0x00008000
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* !(_SPARC_TERMBITS_H) */
diff --git a/arch/sparc/include/asm/termios.h b/arch/sparc/include/asm/termios.h
new file mode 100644
index 0000000..e8ba953
--- /dev/null
+++ b/arch/sparc/include/asm/termios.h
@@ -0,0 +1,186 @@
+#ifndef _SPARC_TERMIOS_H
+#define _SPARC_TERMIOS_H
+
+#include <asm/ioctls.h>
+#include <asm/termbits.h>
+
+#if defined(__KERNEL__) || defined(__DEFINE_BSD_TERMIOS)
+struct sgttyb {
+	char	sg_ispeed;
+	char	sg_ospeed;
+	char	sg_erase;
+	char	sg_kill;
+	short	sg_flags;
+};
+
+struct tchars {
+	char	t_intrc;
+	char	t_quitc;
+	char	t_startc;
+	char	t_stopc;
+	char	t_eofc;
+	char	t_brkc;
+};
+
+struct ltchars {
+	char	t_suspc;
+	char	t_dsuspc;
+	char	t_rprntc;
+	char	t_flushc;
+	char	t_werasc;
+	char	t_lnextc;
+};
+#endif /* __KERNEL__ */
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#ifdef __KERNEL__
+#include <linux/module.h>
+
+/*
+ * c_cc characters in the termio structure.  Oh, how I love being
+ * backwardly compatible.  Notice that character 4 and 5 are
+ * interpreted differently depending on whether ICANON is set in
+ * c_lflag.  If it's set, they are used as _VEOF and _VEOL, otherwise
+ * as _VMIN and V_TIME.  This is for compatibility with OSF/1 (which
+ * is compatible with sysV)...
+ */
+#define _VMIN	4
+#define _VTIME	5
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		eol=\0		eol2=\0		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		dsusp=^Y
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	vmin=\1         vtime=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\000\000\000\021\023\032\031\022\025\027\026\001"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	unsigned short tmp; \
+	int err; \
+	err = get_user(tmp, &(termio)->c_iflag); \
+	(termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
+	err |= get_user(tmp, &(termio)->c_oflag); \
+	(termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
+	err |= get_user(tmp, &(termio)->c_cflag); \
+	(termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
+	err |= get_user(tmp, &(termio)->c_lflag); \
+	(termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
+	err |= copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+	err; \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ *
+ * Note the "fun" _VMIN overloading.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	int err; \
+	err  = put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	err |= put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	err |= put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	err |= put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	err |= put_user((termios)->c_line,  &(termio)->c_line); \
+	err |= copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+	if (!((termios)->c_lflag & ICANON)) { \
+		err |= put_user((termios)->c_cc[VMIN], &(termio)->c_cc[_VMIN]); \
+		err |= put_user((termios)->c_cc[VTIME], &(termio)->c_cc[_VTIME]); \
+	} \
+	err; \
+})
+
+#define user_termios_to_kernel_termios(k, u) \
+({ \
+	int err; \
+	err  = get_user((k)->c_iflag, &(u)->c_iflag); \
+	err |= get_user((k)->c_oflag, &(u)->c_oflag); \
+	err |= get_user((k)->c_cflag, &(u)->c_cflag); \
+	err |= get_user((k)->c_lflag, &(u)->c_lflag); \
+	err |= get_user((k)->c_line,  &(u)->c_line); \
+	err |= copy_from_user((k)->c_cc, (u)->c_cc, NCCS); \
+	if ((k)->c_lflag & ICANON) { \
+		err |= get_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
+		err |= get_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
+	} else { \
+		err |= get_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
+		err |= get_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
+	} \
+	err |= get_user((k)->c_ispeed,  &(u)->c_ispeed); \
+	err |= get_user((k)->c_ospeed,  &(u)->c_ospeed); \
+	err; \
+})
+
+#define kernel_termios_to_user_termios(u, k) \
+({ \
+	int err; \
+	err  = put_user((k)->c_iflag, &(u)->c_iflag); \
+	err |= put_user((k)->c_oflag, &(u)->c_oflag); \
+	err |= put_user((k)->c_cflag, &(u)->c_cflag); \
+	err |= put_user((k)->c_lflag, &(u)->c_lflag); \
+	err |= put_user((k)->c_line, &(u)->c_line); \
+	err |= copy_to_user((u)->c_cc, (k)->c_cc, NCCS); \
+	if (!((k)->c_lflag & ICANON)) { \
+		err |= put_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
+		err |= put_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
+	} else { \
+		err |= put_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
+		err |= put_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
+	} \
+	err |= put_user((k)->c_ispeed, &(u)->c_ispeed); \
+	err |= put_user((k)->c_ospeed, &(u)->c_ospeed); \
+	err; \
+})
+
+#define user_termios_to_kernel_termios_1(k, u) \
+({ \
+	int err; \
+	err  = get_user((k)->c_iflag, &(u)->c_iflag); \
+	err |= get_user((k)->c_oflag, &(u)->c_oflag); \
+	err |= get_user((k)->c_cflag, &(u)->c_cflag); \
+	err |= get_user((k)->c_lflag, &(u)->c_lflag); \
+	err |= get_user((k)->c_line,  &(u)->c_line); \
+	err |= copy_from_user((k)->c_cc, (u)->c_cc, NCCS); \
+	if ((k)->c_lflag & ICANON) { \
+		err |= get_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
+		err |= get_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
+	} else { \
+		err |= get_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
+		err |= get_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
+	} \
+	err; \
+})
+
+#define kernel_termios_to_user_termios_1(u, k) \
+({ \
+	int err; \
+	err  = put_user((k)->c_iflag, &(u)->c_iflag); \
+	err |= put_user((k)->c_oflag, &(u)->c_oflag); \
+	err |= put_user((k)->c_cflag, &(u)->c_cflag); \
+	err |= put_user((k)->c_lflag, &(u)->c_lflag); \
+	err |= put_user((k)->c_line, &(u)->c_line); \
+	err |= copy_to_user((u)->c_cc, (k)->c_cc, NCCS); \
+	if (!((k)->c_lflag & ICANON)) { \
+		err |= put_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
+		err |= put_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
+	} else { \
+		err |= put_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
+		err |= put_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
+	} \
+	err; \
+})
+
+#endif	/* __KERNEL__ */
+
+#endif /* _SPARC_TERMIOS_H */
diff --git a/arch/sparc/include/asm/thread_info.h b/arch/sparc/include/asm/thread_info.h
new file mode 100644
index 0000000..122d7ac
--- /dev/null
+++ b/arch/sparc/include/asm/thread_info.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_THREAD_INFO_H
+#define ___ASM_SPARC_THREAD_INFO_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/thread_info_64.h>
+#else
+#include <asm/thread_info_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/thread_info_32.h b/arch/sparc/include/asm/thread_info_32.h
new file mode 100644
index 0000000..cbb892d
--- /dev/null
+++ b/arch/sparc/include/asm/thread_info_32.h
@@ -0,0 +1,158 @@
+/*
+ * thread_info.h: sparc low-level thread information
+ * adapted from the ppc version by Pete Zaitcev, which was
+ * adapted from the i386 version by Paul Mackerras
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * Copyright (c) 2002  Pete Zaitcev (zaitcev@yahoo.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#include <asm/btfixup.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/*
+ * Low level task data.
+ *
+ * If you change this, change the TI_* offsets below to match.
+ */
+#define NSWINS 8
+struct thread_info {
+	unsigned long		uwinmask;
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	int			cpu;		/* cpu we're on */
+	int			preempt_count;	/* 0 => preemptable,
+						   <0 => BUG */
+	int			softirq_count;
+	int			hardirq_count;
+
+	/* Context switch saved kernel state. */
+	unsigned long ksp;	/* ... ksp __attribute__ ((aligned (8))); */
+	unsigned long kpc;
+	unsigned long kpsr;
+	unsigned long kwim;
+
+	/* A place to store user windows and stack pointers
+	 * when the stack needs inspection.
+	 */
+	struct reg_window	reg_window[NSWINS];	/* align for ldd! */
+	unsigned long		rwbuf_stkptrs[NSWINS];
+	unsigned long		w_saved;
+
+	struct restart_block	restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#define INIT_THREAD_INFO(tsk)				\
+{							\
+	.uwinmask	=	0,			\
+	.task		=	&tsk,			\
+	.exec_domain	=	&default_exec_domain,	\
+	.flags		=	0,			\
+	.cpu		=	0,			\
+	.preempt_count	=	1,			\
+	.restart_block	= {				\
+		.fn	=	do_no_restart_syscall,	\
+	},						\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+register struct thread_info *current_thread_info_reg asm("g6");
+#define current_thread_info()   (current_thread_info_reg)
+
+/*
+ * thread information allocation
+ */
+#if PAGE_SHIFT == 13
+#define THREAD_INFO_ORDER  0
+#else /* PAGE_SHIFT */
+#define THREAD_INFO_ORDER  1
+#endif
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+BTFIXUPDEF_CALL(struct thread_info *, alloc_thread_info, void)
+#define alloc_thread_info(tsk) BTFIXUP_CALL(alloc_thread_info)()
+
+BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *)
+#define free_thread_info(ti) BTFIXUP_CALL(free_thread_info)(ti)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Size of kernel stack for each process.
+ * Observe the order of get_free_pages() in alloc_thread_info().
+ * The sun4 has 8K stack too, because it's short on memory, and 16K is a waste.
+ */
+#define THREAD_SIZE		8192
+
+/*
+ * Offsets in thread_info structure, used in assembly code
+ * The "#define REGWIN_SZ 0x40" was abolished, so no multiplications.
+ */
+#define TI_UWINMASK	0x00	/* uwinmask */
+#define TI_TASK		0x04
+#define TI_EXECDOMAIN	0x08	/* exec_domain */
+#define TI_FLAGS	0x0c
+#define TI_CPU		0x10
+#define TI_PREEMPT	0x14	/* preempt_count */
+#define TI_SOFTIRQ	0x18	/* softirq_count */
+#define TI_HARDIRQ	0x1c	/* hardirq_count */
+#define TI_KSP		0x20	/* ksp */
+#define TI_KPC		0x24	/* kpc (ldd'ed with kpc) */
+#define TI_KPSR		0x28	/* kpsr */
+#define TI_KWIM		0x2c	/* kwim (ldd'ed with kpsr) */
+#define TI_REG_WINDOW	0x30
+#define TI_RWIN_SPTRS	0x230
+#define TI_W_SAVED	0x250
+/* #define TI_RESTART_BLOCK 0x25n */ /* Nobody cares */
+
+#define PREEMPT_ACTIVE		0x4000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_RESTORE_SIGMASK	4	/* restore signal mask in do_signal() */
+#define TIF_USEDFPU		8	/* FPU was used by this task
+					 * this quantum (SMP) */
+#define TIF_POLLING_NRFLAG	9	/* true if poll_idle() is polling
+					 * TIF_NEED_RESCHED */
+#define TIF_MEMDIE		10
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+#define _TIF_USEDFPU		(1<<TIF_USEDFPU)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+
+#define _TIF_DO_NOTIFY_RESUME_MASK	(_TIF_NOTIFY_RESUME | \
+					 _TIF_SIGPENDING | \
+					 _TIF_RESTORE_SIGMASK)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h
new file mode 100644
index 0000000..c0a737d
--- /dev/null
+++ b/arch/sparc/include/asm/thread_info_64.h
@@ -0,0 +1,281 @@
+/* thread_info.h: sparc64 low-level thread information
+ *
+ * Copyright (C) 2002  David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#define NSWINS		7
+
+#define TI_FLAG_BYTE_FAULT_CODE		0
+#define TI_FLAG_FAULT_CODE_SHIFT	56
+#define TI_FLAG_BYTE_WSTATE		1
+#define TI_FLAG_WSTATE_SHIFT		48
+#define TI_FLAG_BYTE_CWP		2
+#define TI_FLAG_CWP_SHIFT		40
+#define TI_FLAG_BYTE_CURRENT_DS		3
+#define TI_FLAG_CURRENT_DS_SHIFT	32
+#define TI_FLAG_BYTE_FPDEPTH		4
+#define TI_FLAG_FPDEPTH_SHIFT		24
+#define TI_FLAG_BYTE_WSAVED		5
+#define TI_FLAG_WSAVED_SHIFT		16
+
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+
+#include <asm/ptrace.h>
+#include <asm/types.h>
+
+struct task_struct;
+struct exec_domain;
+
+struct thread_info {
+	/* D$ line 1 */
+	struct task_struct	*task;
+	unsigned long		flags;
+	__u8			fpsaved[7];
+	__u8			status;
+	unsigned long		ksp;
+
+	/* D$ line 2 */
+	unsigned long		fault_address;
+	struct pt_regs		*kregs;
+	struct exec_domain	*exec_domain;
+	int			preempt_count;	/* 0 => preemptable, <0 => BUG */
+	__u8			new_child;
+	__u8			syscall_noerror;
+	__u16			cpu;
+
+	unsigned long		*utraps;
+
+	struct reg_window 	reg_window[NSWINS];
+	unsigned long 		rwbuf_stkptrs[NSWINS];
+
+	unsigned long		gsr[7];
+	unsigned long		xfsr[7];
+
+	__u64			__user *user_cntd0;
+	__u64			__user *user_cntd1;
+	__u64			kernel_cntd0, kernel_cntd1;
+	__u64			pcr_reg;
+
+	struct restart_block	restart_block;
+
+	struct pt_regs		*kern_una_regs;
+	unsigned int		kern_una_insn;
+
+	unsigned long		fpregs[0] __attribute__ ((aligned(64)));
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+/* offsets into the thread_info struct for assembly code access */
+#define TI_TASK		0x00000000
+#define TI_FLAGS	0x00000008
+#define TI_FAULT_CODE	(TI_FLAGS + TI_FLAG_BYTE_FAULT_CODE)
+#define TI_WSTATE	(TI_FLAGS + TI_FLAG_BYTE_WSTATE)
+#define TI_CWP		(TI_FLAGS + TI_FLAG_BYTE_CWP)
+#define TI_CURRENT_DS	(TI_FLAGS + TI_FLAG_BYTE_CURRENT_DS)
+#define TI_FPDEPTH	(TI_FLAGS + TI_FLAG_BYTE_FPDEPTH)
+#define TI_WSAVED	(TI_FLAGS + TI_FLAG_BYTE_WSAVED)
+#define TI_FPSAVED	0x00000010
+#define TI_KSP		0x00000018
+#define TI_FAULT_ADDR	0x00000020
+#define TI_KREGS	0x00000028
+#define TI_EXEC_DOMAIN	0x00000030
+#define TI_PRE_COUNT	0x00000038
+#define TI_NEW_CHILD	0x0000003c
+#define TI_SYS_NOERROR	0x0000003d
+#define TI_CPU		0x0000003e
+#define TI_UTRAPS	0x00000040
+#define TI_REG_WINDOW	0x00000048
+#define TI_RWIN_SPTRS	0x000003c8
+#define TI_GSR		0x00000400
+#define TI_XFSR		0x00000438
+#define TI_USER_CNTD0	0x00000470
+#define TI_USER_CNTD1	0x00000478
+#define TI_KERN_CNTD0	0x00000480
+#define TI_KERN_CNTD1	0x00000488
+#define TI_PCR		0x00000490
+#define TI_RESTART_BLOCK 0x00000498
+#define TI_KUNA_REGS	0x000004c0
+#define TI_KUNA_INSN	0x000004c8
+#define TI_FPREGS	0x00000500
+
+/* We embed this in the uppermost byte of thread_info->flags */
+#define FAULT_CODE_WRITE	0x01	/* Write access, implies D-TLB	   */
+#define FAULT_CODE_DTLB		0x02	/* Miss happened in D-TLB	   */
+#define FAULT_CODE_ITLB		0x04	/* Miss happened in I-TLB	   */
+#define FAULT_CODE_WINFIXUP	0x08	/* Miss happened during spill/fill */
+#define FAULT_CODE_BLKCOMMIT	0x10	/* Use blk-commit ASI in copy_page */
+
+#if PAGE_SHIFT == 13
+#define THREAD_SIZE (2*PAGE_SIZE)
+#define THREAD_SHIFT (PAGE_SHIFT + 1)
+#else /* PAGE_SHIFT == 13 */
+#define THREAD_SIZE PAGE_SIZE
+#define THREAD_SHIFT PAGE_SHIFT
+#endif /* PAGE_SHIFT == 13 */
+
+#define PREEMPT_ACTIVE		0x4000000
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+
+#define INIT_THREAD_INFO(tsk)				\
+{							\
+	.task		=	&tsk,			\
+	.flags		= ((unsigned long)ASI_P) << TI_FLAG_CURRENT_DS_SHIFT,	\
+	.exec_domain	=	&default_exec_domain,	\
+	.preempt_count	=	1,			\
+	.restart_block	= {				\
+		.fn	=	do_no_restart_syscall,	\
+	},						\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+register struct thread_info *current_thread_info_reg asm("g6");
+#define current_thread_info()	(current_thread_info_reg)
+
+/* thread information allocation */
+#if PAGE_SHIFT == 13
+#define __THREAD_INFO_ORDER	1
+#else /* PAGE_SHIFT == 13 */
+#define __THREAD_INFO_ORDER	0
+#endif /* PAGE_SHIFT == 13 */
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk)					\
+({								\
+	struct thread_info *ret;				\
+								\
+	ret = (struct thread_info *)				\
+	  __get_free_pages(GFP_KERNEL, __THREAD_INFO_ORDER);	\
+	if (ret)						\
+		memset(ret, 0, PAGE_SIZE<<__THREAD_INFO_ORDER);	\
+	ret;							\
+})
+#else
+#define alloc_thread_info(tsk) \
+	((struct thread_info *)__get_free_pages(GFP_KERNEL, __THREAD_INFO_ORDER))
+#endif
+
+#define free_thread_info(ti) \
+	free_pages((unsigned long)(ti),__THREAD_INFO_ORDER)
+
+#define __thread_flag_byte_ptr(ti)	\
+	((unsigned char *)(&((ti)->flags)))
+#define __cur_thread_flag_byte_ptr	__thread_flag_byte_ptr(current_thread_info())
+
+#define get_thread_fault_code()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FAULT_CODE])
+#define set_thread_fault_code(val)	(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FAULT_CODE] = (val))
+#define get_thread_wstate()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSTATE])
+#define set_thread_wstate(val)		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSTATE] = (val))
+#define get_thread_cwp()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CWP])
+#define set_thread_cwp(val)		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CWP] = (val))
+#define get_thread_current_ds()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CURRENT_DS])
+#define set_thread_current_ds(val)	(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CURRENT_DS] = (val))
+#define get_thread_fpdepth()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FPDEPTH])
+#define set_thread_fpdepth(val)		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FPDEPTH] = (val))
+#define get_thread_wsaved()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSAVED])
+#define set_thread_wsaved(val)		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSAVED] = (val))
+
+#endif /* !(__ASSEMBLY__) */
+
+/*
+ * Thread information flags, only 16 bits are available as we encode
+ * other values into the upper 6 bytes.
+ *
+ * On trap return we need to test several values:
+ *
+ * user:	need_resched, notify_resume, sigpending, wsaved, perfctr
+ * kernel:	fpdepth
+ *
+ * So to check for work in the kernel case we simply load the fpdepth
+ * byte out of the flags and test it.  For the user case we encode the
+ * lower 3 bytes of flags as follows:
+ *	----------------------------------------
+ *	| wsaved | flags byte 1 | flags byte 2 |
+ *	----------------------------------------
+ * This optimizes the user test into:
+ *	ldx		[%g6 + TI_FLAGS], REG1
+ *	sethi		%hi(_TIF_USER_WORK_MASK), REG2
+ *	or		REG2, %lo(_TIF_USER_WORK_MASK), REG2
+ *	andcc		REG1, REG2, %g0
+ *	be,pt		no_work_to_do
+ *	 nop
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_PERFCTR		4	/* performance counters active */
+#define TIF_UNALIGNED		5	/* allowed to do unaligned accesses */
+/* flag bit 6 is available */
+#define TIF_32BIT		7	/* 32-bit binary */
+/* flag bit 8 is available */
+#define TIF_SECCOMP		9	/* secure computing */
+#define TIF_SYSCALL_AUDIT	10	/* syscall auditing active */
+/* flag bit 11 is available */
+/* NOTE: Thread flags >= 12 should be ones we have no interest
+ *       in using in assembly, else we can't use the mask as
+ *       an immediate value in instructions such as andcc.
+ */
+#define TIF_ABI_PENDING		12
+#define TIF_MEMDIE		13
+#define TIF_POLLING_NRFLAG	14
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_PERFCTR		(1<<TIF_PERFCTR)
+#define _TIF_UNALIGNED		(1<<TIF_UNALIGNED)
+#define _TIF_32BIT		(1<<TIF_32BIT)
+#define _TIF_SECCOMP		(1<<TIF_SECCOMP)
+#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
+#define _TIF_ABI_PENDING	(1<<TIF_ABI_PENDING)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+
+#define _TIF_USER_WORK_MASK	((0xff << TI_FLAG_WSAVED_SHIFT) | \
+				 _TIF_DO_NOTIFY_RESUME_MASK | \
+				 _TIF_NEED_RESCHED | _TIF_PERFCTR)
+#define _TIF_DO_NOTIFY_RESUME_MASK	(_TIF_NOTIFY_RESUME | _TIF_SIGPENDING)
+
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ *
+ * Note that there are only 8 bits available.
+ */
+#define TS_RESTORE_SIGMASK	0x0001	/* restore signal mask in do_signal() */
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK	1
+static inline void set_restore_sigmask(void)
+{
+	struct thread_info *ti = current_thread_info();
+	ti->status |= TS_RESTORE_SIGMASK;
+	set_bit(TIF_SIGPENDING, &ti->flags);
+}
+#endif	/* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/sparc/include/asm/timer.h b/arch/sparc/include/asm/timer.h
new file mode 100644
index 0000000..612fd27
--- /dev/null
+++ b/arch/sparc/include/asm/timer.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TIMER_H
+#define ___ASM_SPARC_TIMER_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/timer_64.h>
+#else
+#include <asm/timer_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/timer_32.h b/arch/sparc/include/asm/timer_32.h
new file mode 100644
index 0000000..361e538
--- /dev/null
+++ b/arch/sparc/include/asm/timer_32.h
@@ -0,0 +1,107 @@
+/*
+ * timer.h:  Definitions for the timer chips on the Sparc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+
+#ifndef _SPARC_TIMER_H
+#define _SPARC_TIMER_H
+
+#include <asm/system.h>  /* For SUN4M_NCPUS */
+#include <asm/sun4paddr.h>
+#include <asm/btfixup.h>
+
+/* Timer structures. The interrupt timer has two properties which
+ * are the counter (which is handled in do_timer in sched.c) and the limit.
+ * This limit is where the timer's counter 'wraps' around. Oddly enough,
+ * the sun4c timer when it hits the limit wraps back to 1 and not zero
+ * thus when calculating the value at which it will fire a microsecond you
+ * must adjust by one.  Thanks SUN for designing such great hardware ;(
+ */
+
+/* Note that I am only going to use the timer that interrupts at
+ * Sparc IRQ 10.  There is another one available that can fire at
+ * IRQ 14. Currently it is left untouched, we keep the PROM's limit
+ * register value and let the prom take these interrupts.  This allows
+ * L1-A to work.
+ */
+
+struct sun4c_timer_info {
+  __volatile__ unsigned int cur_count10;
+  __volatile__ unsigned int timer_limit10;
+  __volatile__ unsigned int cur_count14;
+  __volatile__ unsigned int timer_limit14;
+};
+
+#define SUN4C_TIMER_PHYSADDR   0xf3000000
+#ifdef CONFIG_SUN4
+#define SUN_TIMER_PHYSADDR SUN4_300_TIMER_PHYSADDR
+#else
+#define SUN_TIMER_PHYSADDR SUN4C_TIMER_PHYSADDR
+#endif
+
+/* A sun4m has two blocks of registers which are probably of the same
+ * structure. LSI Logic's L64851 is told to _decrement_ from the limit
+ * value. Aurora behaves similarly but its limit value is compacted in
+ * other fashion (it's wider). Documented fields are defined here.
+ */
+
+/* As with the interrupt register, we have two classes of timer registers
+ * which are per-cpu and master.  Per-cpu timers only hit that cpu and are
+ * only level 14 ticks, master timer hits all cpus and is level 10.
+ */
+
+#define SUN4M_PRM_CNT_L       0x80000000
+#define SUN4M_PRM_CNT_LVALUE  0x7FFFFC00
+
+struct sun4m_timer_percpu_info {
+  __volatile__ unsigned int l14_timer_limit;    /* Initial value is 0x009c4000 */
+  __volatile__ unsigned int l14_cur_count;
+
+  /* This register appears to be write only and/or inaccessible
+   * on Uni-Processor sun4m machines.
+   */
+  __volatile__ unsigned int l14_limit_noclear;  /* Data access error is here */
+
+  __volatile__ unsigned int cntrl;            /* =1 after POST on Aurora */
+  __volatile__ unsigned char space[PAGE_SIZE - 16];
+};
+
+struct sun4m_timer_regs {
+	struct sun4m_timer_percpu_info cpu_timers[SUN4M_NCPUS];
+	volatile unsigned int l10_timer_limit;
+	volatile unsigned int l10_cur_count;
+
+	/* Again, this appears to be write only and/or inaccessible
+	 * on uni-processor sun4m machines.
+	 */
+	volatile unsigned int l10_limit_noclear;
+
+	/* This register too, it must be magic. */
+	volatile unsigned int foobar;
+
+	volatile unsigned int cfg;     /* equals zero at boot time... */
+};
+
+#define SUN4D_PRM_CNT_L       0x80000000
+#define SUN4D_PRM_CNT_LVALUE  0x7FFFFC00
+
+struct sun4d_timer_regs {
+	volatile unsigned int l10_timer_limit;
+	volatile unsigned int l10_cur_countx;
+	volatile unsigned int l10_limit_noclear;
+	volatile unsigned int ctrl;
+	volatile unsigned int l10_cur_count;
+};
+
+extern struct sun4d_timer_regs *sun4d_timers;
+
+extern __volatile__ unsigned int *master_l10_counter;
+extern __volatile__ unsigned int *master_l10_limit;
+
+/* FIXME: Make do_[gs]ettimeofday btfixup calls */
+BTFIXUPDEF_CALL(int, bus_do_settimeofday, struct timespec *tv)
+#define bus_do_settimeofday(tv) BTFIXUP_CALL(bus_do_settimeofday)(tv)
+
+#endif /* !(_SPARC_TIMER_H) */
diff --git a/arch/sparc/include/asm/timer_64.h b/arch/sparc/include/asm/timer_64.h
new file mode 100644
index 0000000..5b779fd
--- /dev/null
+++ b/arch/sparc/include/asm/timer_64.h
@@ -0,0 +1,30 @@
+/* timer.h: System timer definitions for sun5.
+ *
+ * Copyright (C) 1997, 2008 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC64_TIMER_H
+#define _SPARC64_TIMER_H
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+struct sparc64_tick_ops {
+	unsigned long (*get_tick)(void);
+	int (*add_compare)(unsigned long);
+	unsigned long softint_mask;
+	void (*disable_irq)(void);
+
+	void (*init_tick)(void);
+	unsigned long (*add_tick)(unsigned long);
+
+	char *name;
+};
+
+extern struct sparc64_tick_ops *tick_ops;
+
+extern unsigned long sparc64_get_clock_tick(unsigned int cpu);
+extern void __devinit setup_sparc64_timer(void);
+extern void __init time_init(void);
+
+#endif /* _SPARC64_TIMER_H */
diff --git a/arch/sparc/include/asm/timex.h b/arch/sparc/include/asm/timex.h
new file mode 100644
index 0000000..70cc37b
--- /dev/null
+++ b/arch/sparc/include/asm/timex.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TIMEX_H
+#define ___ASM_SPARC_TIMEX_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/timex_64.h>
+#else
+#include <asm/timex_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/timex_32.h b/arch/sparc/include/asm/timex_32.h
new file mode 100644
index 0000000..b6ccdb0
--- /dev/null
+++ b/arch/sparc/include/asm/timex_32.h
@@ -0,0 +1,15 @@
+/*
+ * linux/include/asm/timex.h
+ *
+ * sparc architecture timex specifications
+ */
+#ifndef _ASMsparc_TIMEX_H
+#define _ASMsparc_TIMEX_H
+
+#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
+
+/* XXX Maybe do something better at some point... -DaveM */
+typedef unsigned long cycles_t;
+#define get_cycles()	(0)
+
+#endif
diff --git a/arch/sparc/include/asm/timex_64.h b/arch/sparc/include/asm/timex_64.h
new file mode 100644
index 0000000..18b30bc
--- /dev/null
+++ b/arch/sparc/include/asm/timex_64.h
@@ -0,0 +1,19 @@
+/*
+ * linux/include/asm/timex.h
+ *
+ * sparc64 architecture timex specifications
+ */
+#ifndef _ASMsparc64_TIMEX_H
+#define _ASMsparc64_TIMEX_H
+
+#include <asm/timer.h>
+
+#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
+
+/* Getting on the cycle counter on sparc64. */
+typedef unsigned long cycles_t;
+#define get_cycles()	tick_ops->get_tick()
+
+#define ARCH_HAS_READ_CURRENT_TIMER
+
+#endif
diff --git a/arch/sparc/include/asm/tlb.h b/arch/sparc/include/asm/tlb.h
new file mode 100644
index 0000000..92d0393
--- /dev/null
+++ b/arch/sparc/include/asm/tlb.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TLB_H
+#define ___ASM_SPARC_TLB_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/tlb_64.h>
+#else
+#include <asm/tlb_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/tlb_32.h b/arch/sparc/include/asm/tlb_32.h
new file mode 100644
index 0000000..6d02d1c
--- /dev/null
+++ b/arch/sparc/include/asm/tlb_32.h
@@ -0,0 +1,24 @@
+#ifndef _SPARC_TLB_H
+#define _SPARC_TLB_H
+
+#define tlb_start_vma(tlb, vma) \
+do {								\
+	flush_cache_range(vma, vma->vm_start, vma->vm_end);	\
+} while (0)
+
+#define tlb_end_vma(tlb, vma) \
+do {								\
+	flush_tlb_range(vma, vma->vm_start, vma->vm_end);	\
+} while (0)
+
+#define __tlb_remove_tlb_entry(tlb, pte, address) \
+	do { } while (0)
+
+#define tlb_flush(tlb) \
+do {								\
+	flush_tlb_mm((tlb)->mm);				\
+} while (0)
+
+#include <asm-generic/tlb.h>
+
+#endif /* _SPARC_TLB_H */
diff --git a/arch/sparc/include/asm/tlb_64.h b/arch/sparc/include/asm/tlb_64.h
new file mode 100644
index 0000000..ec81cde
--- /dev/null
+++ b/arch/sparc/include/asm/tlb_64.h
@@ -0,0 +1,111 @@
+#ifndef _SPARC64_TLB_H
+#define _SPARC64_TLB_H
+
+#include <linux/swap.h>
+#include <linux/pagemap.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+
+#define TLB_BATCH_NR	192
+
+/*
+ * For UP we don't need to worry about TLB flush
+ * and page free order so much..
+ */
+#ifdef CONFIG_SMP
+  #define FREE_PTE_NR	506
+  #define tlb_fast_mode(bp) ((bp)->pages_nr == ~0U)
+#else
+  #define FREE_PTE_NR	1
+  #define tlb_fast_mode(bp) 1
+#endif
+
+struct mmu_gather {
+	struct mm_struct *mm;
+	unsigned int pages_nr;
+	unsigned int need_flush;
+	unsigned int fullmm;
+	unsigned int tlb_nr;
+	unsigned long vaddrs[TLB_BATCH_NR];
+	struct page *pages[FREE_PTE_NR];
+};
+
+DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+#ifdef CONFIG_SMP
+extern void smp_flush_tlb_pending(struct mm_struct *,
+				  unsigned long, unsigned long *);
+#endif
+
+extern void __flush_tlb_pending(unsigned long, unsigned long, unsigned long *);
+extern void flush_tlb_pending(void);
+
+static inline struct mmu_gather *tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
+{
+	struct mmu_gather *mp = &get_cpu_var(mmu_gathers);
+
+	BUG_ON(mp->tlb_nr);
+
+	mp->mm = mm;
+	mp->pages_nr = num_online_cpus() > 1 ? 0U : ~0U;
+	mp->fullmm = full_mm_flush;
+
+	return mp;
+}
+
+
+static inline void tlb_flush_mmu(struct mmu_gather *mp)
+{
+	if (mp->need_flush) {
+		free_pages_and_swap_cache(mp->pages, mp->pages_nr);
+		mp->pages_nr = 0;
+		mp->need_flush = 0;
+	}
+
+}
+
+#ifdef CONFIG_SMP
+extern void smp_flush_tlb_mm(struct mm_struct *mm);
+#define do_flush_tlb_mm(mm) smp_flush_tlb_mm(mm)
+#else
+#define do_flush_tlb_mm(mm) __flush_tlb_mm(CTX_HWBITS(mm->context), SECONDARY_CONTEXT)
+#endif
+
+static inline void tlb_finish_mmu(struct mmu_gather *mp, unsigned long start, unsigned long end)
+{
+	tlb_flush_mmu(mp);
+
+	if (mp->fullmm)
+		mp->fullmm = 0;
+	else
+		flush_tlb_pending();
+
+	/* keep the page table cache within bounds */
+	check_pgt_cache();
+
+	put_cpu_var(mmu_gathers);
+}
+
+static inline void tlb_remove_page(struct mmu_gather *mp, struct page *page)
+{
+	if (tlb_fast_mode(mp)) {
+		free_page_and_swap_cache(page);
+		return;
+	}
+	mp->need_flush = 1;
+	mp->pages[mp->pages_nr++] = page;
+	if (mp->pages_nr >= FREE_PTE_NR)
+		tlb_flush_mmu(mp);
+}
+
+#define tlb_remove_tlb_entry(mp,ptep,addr) do { } while (0)
+#define pte_free_tlb(mp, ptepage) pte_free((mp)->mm, ptepage)
+#define pmd_free_tlb(mp, pmdp) pmd_free((mp)->mm, pmdp)
+#define pud_free_tlb(tlb,pudp) __pud_free_tlb(tlb,pudp)
+
+#define tlb_migrate_finish(mm)	do { } while (0)
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma)	do { } while (0)
+
+#endif /* _SPARC64_TLB_H */
diff --git a/arch/sparc/include/asm/tlbflush.h b/arch/sparc/include/asm/tlbflush.h
new file mode 100644
index 0000000..2c9629f
--- /dev/null
+++ b/arch/sparc/include/asm/tlbflush.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TLBFLUSH_H
+#define ___ASM_SPARC_TLBFLUSH_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/tlbflush_64.h>
+#else
+#include <asm/tlbflush_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/tlbflush_32.h b/arch/sparc/include/asm/tlbflush_32.h
new file mode 100644
index 0000000..fe0a71a
--- /dev/null
+++ b/arch/sparc/include/asm/tlbflush_32.h
@@ -0,0 +1,60 @@
+#ifndef _SPARC_TLBFLUSH_H
+#define _SPARC_TLBFLUSH_H
+
+#include <linux/mm.h>
+// #include <asm/processor.h>
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb() flushes the current mm struct TLBs	XXX Exists?
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ */
+
+#ifdef CONFIG_SMP
+
+BTFIXUPDEF_CALL(void, local_flush_tlb_all, void)
+BTFIXUPDEF_CALL(void, local_flush_tlb_mm, struct mm_struct *)
+BTFIXUPDEF_CALL(void, local_flush_tlb_range, struct vm_area_struct *, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, local_flush_tlb_page, struct vm_area_struct *, unsigned long)
+
+#define local_flush_tlb_all() BTFIXUP_CALL(local_flush_tlb_all)()
+#define local_flush_tlb_mm(mm) BTFIXUP_CALL(local_flush_tlb_mm)(mm)
+#define local_flush_tlb_range(vma,start,end) BTFIXUP_CALL(local_flush_tlb_range)(vma,start,end)
+#define local_flush_tlb_page(vma,addr) BTFIXUP_CALL(local_flush_tlb_page)(vma,addr)
+
+extern void smp_flush_tlb_all(void);
+extern void smp_flush_tlb_mm(struct mm_struct *mm);
+extern void smp_flush_tlb_range(struct vm_area_struct *vma,
+				  unsigned long start,
+				  unsigned long end);
+extern void smp_flush_tlb_page(struct vm_area_struct *mm, unsigned long page);
+
+#endif /* CONFIG_SMP */
+
+BTFIXUPDEF_CALL(void, flush_tlb_all, void)
+BTFIXUPDEF_CALL(void, flush_tlb_mm, struct mm_struct *)
+BTFIXUPDEF_CALL(void, flush_tlb_range, struct vm_area_struct *, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, flush_tlb_page, struct vm_area_struct *, unsigned long)
+
+#define flush_tlb_all() BTFIXUP_CALL(flush_tlb_all)()
+#define flush_tlb_mm(mm) BTFIXUP_CALL(flush_tlb_mm)(mm)
+#define flush_tlb_range(vma,start,end) BTFIXUP_CALL(flush_tlb_range)(vma,start,end)
+#define flush_tlb_page(vma,addr) BTFIXUP_CALL(flush_tlb_page)(vma,addr)
+
+// #define flush_tlb() flush_tlb_mm(current->active_mm)	/* XXX Sure? */
+
+/*
+ * This is a kludge, until I know better. --zaitcev XXX
+ */
+static inline void flush_tlb_kernel_range(unsigned long start,
+					  unsigned long end)
+{
+	flush_tlb_all();
+}
+
+#endif /* _SPARC_TLBFLUSH_H */
diff --git a/arch/sparc/include/asm/tlbflush_64.h b/arch/sparc/include/asm/tlbflush_64.h
new file mode 100644
index 0000000..fbb675d
--- /dev/null
+++ b/arch/sparc/include/asm/tlbflush_64.h
@@ -0,0 +1,44 @@
+#ifndef _SPARC64_TLBFLUSH_H
+#define _SPARC64_TLBFLUSH_H
+
+#include <linux/mm.h>
+#include <asm/mmu_context.h>
+
+/* TSB flush operations. */
+struct mmu_gather;
+extern void flush_tsb_kernel_range(unsigned long start, unsigned long end);
+extern void flush_tsb_user(struct mmu_gather *mp);
+
+/* TLB flush operations. */
+
+extern void flush_tlb_pending(void);
+
+#define flush_tlb_range(vma,start,end)	\
+	do { (void)(start); flush_tlb_pending(); } while (0)
+#define flush_tlb_page(vma,addr)	flush_tlb_pending()
+#define flush_tlb_mm(mm)		flush_tlb_pending()
+
+/* Local cpu only.  */
+extern void __flush_tlb_all(void);
+
+extern void __flush_tlb_kernel_range(unsigned long start, unsigned long end);
+
+#ifndef CONFIG_SMP
+
+#define flush_tlb_kernel_range(start,end) \
+do {	flush_tsb_kernel_range(start,end); \
+	__flush_tlb_kernel_range(start,end); \
+} while (0)
+
+#else /* CONFIG_SMP */
+
+extern void smp_flush_tlb_kernel_range(unsigned long start, unsigned long end);
+
+#define flush_tlb_kernel_range(start, end) \
+do {	flush_tsb_kernel_range(start,end); \
+	smp_flush_tlb_kernel_range(start, end); \
+} while (0)
+
+#endif /* ! CONFIG_SMP */
+
+#endif /* _SPARC64_TLBFLUSH_H */
diff --git a/arch/sparc/include/asm/topology.h b/arch/sparc/include/asm/topology.h
new file mode 100644
index 0000000..ee4f191
--- /dev/null
+++ b/arch/sparc/include/asm/topology.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TOPOLOGY_H
+#define ___ASM_SPARC_TOPOLOGY_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/topology_64.h>
+#else
+#include <asm/topology_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/topology_32.h b/arch/sparc/include/asm/topology_32.h
new file mode 100644
index 0000000..ee5ac9c
--- /dev/null
+++ b/arch/sparc/include/asm/topology_32.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SPARC_TOPOLOGY_H
+#define _ASM_SPARC_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_SPARC_TOPOLOGY_H */
diff --git a/arch/sparc/include/asm/topology_64.h b/arch/sparc/include/asm/topology_64.h
new file mode 100644
index 0000000..001c040
--- /dev/null
+++ b/arch/sparc/include/asm/topology_64.h
@@ -0,0 +1,86 @@
+#ifndef _ASM_SPARC64_TOPOLOGY_H
+#define _ASM_SPARC64_TOPOLOGY_H
+
+#ifdef CONFIG_NUMA
+
+#include <asm/mmzone.h>
+
+static inline int cpu_to_node(int cpu)
+{
+	return numa_cpu_lookup_table[cpu];
+}
+
+#define parent_node(node)	(node)
+
+static inline cpumask_t node_to_cpumask(int node)
+{
+	return numa_cpumask_lookup_table[node];
+}
+
+/* Returns a pointer to the cpumask of CPUs on Node 'node'. */
+#define node_to_cpumask_ptr(v, node)		\
+		cpumask_t *v = &(numa_cpumask_lookup_table[node])
+
+#define node_to_cpumask_ptr_next(v, node)	\
+			   v = &(numa_cpumask_lookup_table[node])
+
+static inline int node_to_first_cpu(int node)
+{
+	cpumask_t tmp;
+	tmp = node_to_cpumask(node);
+	return first_cpu(tmp);
+}
+
+struct pci_bus;
+#ifdef CONFIG_PCI
+extern int pcibus_to_node(struct pci_bus *pbus);
+#else
+static inline int pcibus_to_node(struct pci_bus *pbus)
+{
+	return -1;
+}
+#endif
+
+#define pcibus_to_cpumask(bus)	\
+	(pcibus_to_node(bus) == -1 ? \
+	 CPU_MASK_ALL : \
+	 node_to_cpumask(pcibus_to_node(bus)))
+
+#define SD_NODE_INIT (struct sched_domain) {		\
+	.min_interval		= 8,			\
+	.max_interval		= 32,			\
+	.busy_factor		= 32,			\
+	.imbalance_pct		= 125,			\
+	.cache_nice_tries	= 2,			\
+	.busy_idx		= 3,			\
+	.idle_idx		= 2,			\
+	.newidle_idx		= 0, 			\
+	.wake_idx		= 1,			\
+	.forkexec_idx		= 1,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_FORK	\
+				| SD_BALANCE_EXEC	\
+				| SD_SERIALIZE		\
+				| SD_WAKE_BALANCE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+}
+
+#else /* CONFIG_NUMA */
+
+#include <asm-generic/topology.h>
+
+#endif /* !(CONFIG_NUMA) */
+
+#ifdef CONFIG_SMP
+#define topology_physical_package_id(cpu)	(cpu_data(cpu).proc_id)
+#define topology_core_id(cpu)			(cpu_data(cpu).core_id)
+#define topology_core_siblings(cpu)		(cpu_core_map[cpu])
+#define topology_thread_siblings(cpu)		(per_cpu(cpu_sibling_map, cpu))
+#define mc_capable()				(sparc64_multi_core)
+#define smt_capable()				(sparc64_multi_core)
+#endif /* CONFIG_SMP */
+
+#define cpu_coregroup_map(cpu)			(cpu_core_map[cpu])
+
+#endif /* _ASM_SPARC64_TOPOLOGY_H */
diff --git a/arch/sparc/include/asm/traps.h b/arch/sparc/include/asm/traps.h
new file mode 100644
index 0000000..bebdbf8
--- /dev/null
+++ b/arch/sparc/include/asm/traps.h
@@ -0,0 +1,140 @@
+/*
+ * traps.h:  Format of entries for the Sparc trap table.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_TRAPS_H
+#define _SPARC_TRAPS_H
+
+#define NUM_SPARC_TRAPS  255
+
+#ifndef __ASSEMBLY__
+
+/* This is for V8 compliant Sparc CPUS */
+struct tt_entry {
+	unsigned long inst_one;
+	unsigned long inst_two;
+	unsigned long inst_three;
+	unsigned long inst_four;
+};
+
+/* We set this to _start in system setup. */
+extern struct tt_entry *sparc_ttable;
+
+static inline unsigned long get_tbr(void)
+{
+	unsigned long tbr;
+
+	__asm__ __volatile__("rd %%tbr, %0\n\t" : "=r" (tbr));
+	return tbr;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+/* For patching the trap table at boot time, we need to know how to
+ * form various common Sparc instructions.  Thus these macros...
+ */
+
+#define SPARC_MOV_CONST_L3(const) (0xa6102000 | (const&0xfff))
+
+/* The following assumes that the branch lies before the place we
+ * are branching to.  This is the case for a trap vector...
+ * You have been warned.
+ */
+#define SPARC_BRANCH(dest_addr, inst_addr) \
+          (0x10800000 | (((dest_addr-inst_addr)>>2)&0x3fffff))
+
+#define SPARC_RD_PSR_L0  (0xa1480000)
+#define SPARC_RD_WIM_L3  (0xa7500000)
+#define SPARC_NOP (0x01000000)
+
+/* Various interesting trap levels. */
+/* First, hardware traps. */
+#define SP_TRAP_TFLT    0x1          /* Text fault */
+#define SP_TRAP_II      0x2          /* Illegal Instruction */
+#define SP_TRAP_PI      0x3          /* Privileged Instruction */
+#define SP_TRAP_FPD     0x4          /* Floating Point Disabled */
+#define SP_TRAP_WOVF    0x5          /* Window Overflow */
+#define SP_TRAP_WUNF    0x6          /* Window Underflow */
+#define SP_TRAP_MNA     0x7          /* Memory Address Unaligned */
+#define SP_TRAP_FPE     0x8          /* Floating Point Exception */
+#define SP_TRAP_DFLT    0x9          /* Data Fault */
+#define SP_TRAP_TOF     0xa          /* Tag Overflow */
+#define SP_TRAP_WDOG    0xb          /* Watchpoint Detected */
+#define SP_TRAP_IRQ1    0x11         /* IRQ level 1 */
+#define SP_TRAP_IRQ2    0x12         /* IRQ level 2 */
+#define SP_TRAP_IRQ3    0x13         /* IRQ level 3 */
+#define SP_TRAP_IRQ4    0x14         /* IRQ level 4 */
+#define SP_TRAP_IRQ5    0x15         /* IRQ level 5 */
+#define SP_TRAP_IRQ6    0x16         /* IRQ level 6 */
+#define SP_TRAP_IRQ7    0x17         /* IRQ level 7 */
+#define SP_TRAP_IRQ8    0x18         /* IRQ level 8 */
+#define SP_TRAP_IRQ9    0x19         /* IRQ level 9 */
+#define SP_TRAP_IRQ10   0x1a         /* IRQ level 10 */
+#define SP_TRAP_IRQ11   0x1b         /* IRQ level 11 */
+#define SP_TRAP_IRQ12   0x1c         /* IRQ level 12 */
+#define SP_TRAP_IRQ13   0x1d         /* IRQ level 13 */
+#define SP_TRAP_IRQ14   0x1e         /* IRQ level 14 */
+#define SP_TRAP_IRQ15   0x1f         /* IRQ level 15 Non-maskable */
+#define SP_TRAP_RACC    0x20         /* Register Access Error ??? */
+#define SP_TRAP_IACC    0x21         /* Instruction Access Error */
+#define SP_TRAP_CPDIS   0x24         /* Co-Processor Disabled */
+#define SP_TRAP_BADFL   0x25         /* Unimplemented Flush Instruction */
+#define SP_TRAP_CPEXP   0x28         /* Co-Processor Exception */
+#define SP_TRAP_DACC    0x29         /* Data Access Error */
+#define SP_TRAP_DIVZ    0x2a         /* Divide By Zero */
+#define SP_TRAP_DSTORE  0x2b         /* Data Store Error ??? */
+#define SP_TRAP_DMM     0x2c         /* Data Access MMU Miss ??? */
+#define SP_TRAP_IMM     0x3c         /* Instruction Access MMU Miss ??? */
+
+/* Now the Software Traps... */
+#define SP_TRAP_SUNOS   0x80         /* SunOS System Call */
+#define SP_TRAP_SBPT    0x81         /* Software Breakpoint */
+#define SP_TRAP_SDIVZ   0x82         /* Software Divide-by-Zero trap */
+#define SP_TRAP_FWIN    0x83         /* Flush Windows */
+#define SP_TRAP_CWIN    0x84         /* Clean Windows */
+#define SP_TRAP_RCHK    0x85         /* Range Check */
+#define SP_TRAP_FUNA    0x86         /* Fix Unaligned Access */
+#define SP_TRAP_IOWFL   0x87         /* Integer Overflow */
+#define SP_TRAP_SOLARIS 0x88         /* Solaris System Call */
+#define SP_TRAP_NETBSD  0x89         /* NetBSD System Call */
+#define SP_TRAP_LINUX   0x90         /* Linux System Call */
+
+/* Names used for compatibility with SunOS */
+#define ST_SYSCALL              0x00
+#define ST_BREAKPOINT           0x01
+#define ST_DIV0                 0x02
+#define ST_FLUSH_WINDOWS        0x03
+#define ST_CLEAN_WINDOWS        0x04
+#define ST_RANGE_CHECK          0x05
+#define ST_FIX_ALIGN            0x06
+#define ST_INT_OVERFLOW         0x07
+
+/* Special traps... */
+#define SP_TRAP_KBPT1   0xfe         /* KADB/PROM Breakpoint one */
+#define SP_TRAP_KBPT2   0xff         /* KADB/PROM Breakpoint two */
+
+/* Handy Macros */
+/* Is this a trap we never expect to get? */
+#define BAD_TRAP_P(level) \
+        ((level > SP_TRAP_WDOG && level < SP_TRAP_IRQ1) || \
+	 (level > SP_TRAP_IACC && level < SP_TRAP_CPDIS) || \
+	 (level > SP_TRAP_BADFL && level < SP_TRAP_CPEXP) || \
+	 (level > SP_TRAP_DMM && level < SP_TRAP_IMM) || \
+	 (level > SP_TRAP_IMM && level < SP_TRAP_SUNOS) || \
+	 (level > SP_TRAP_LINUX && level < SP_TRAP_KBPT1))
+
+/* Is this a Hardware trap? */
+#define HW_TRAP_P(level) ((level > 0) && (level < SP_TRAP_SUNOS))
+
+/* Is this a Software trap? */
+#define SW_TRAP_P(level) ((level >= SP_TRAP_SUNOS) && (level <= SP_TRAP_KBPT2))
+
+/* Is this a system call for some OS we know about? */
+#define SCALL_TRAP_P(level) ((level == SP_TRAP_SUNOS) || \
+			     (level == SP_TRAP_SOLARIS) || \
+			     (level == SP_TRAP_NETBSD) || \
+			     (level == SP_TRAP_LINUX))
+
+#endif /* !(_SPARC_TRAPS_H) */
diff --git a/arch/sparc/include/asm/tsb.h b/arch/sparc/include/asm/tsb.h
new file mode 100644
index 0000000..76e4299
--- /dev/null
+++ b/arch/sparc/include/asm/tsb.h
@@ -0,0 +1,283 @@
+#ifndef _SPARC64_TSB_H
+#define _SPARC64_TSB_H
+
+/* The sparc64 TSB is similar to the powerpc hashtables.  It's a
+ * power-of-2 sized table of TAG/PTE pairs.  The cpu precomputes
+ * pointers into this table for 8K and 64K page sizes, and also a
+ * comparison TAG based upon the virtual address and context which
+ * faults.
+ *
+ * TLB miss trap handler software does the actual lookup via something
+ * of the form:
+ *
+ * 	ldxa		[%g0] ASI_{D,I}MMU_TSB_8KB_PTR, %g1
+ * 	ldxa		[%g0] ASI_{D,I}MMU, %g6
+ *	sllx		%g6, 22, %g6
+ *	srlx		%g6, 22, %g6
+ * 	ldda		[%g1] ASI_NUCLEUS_QUAD_LDD, %g4
+ * 	cmp		%g4, %g6
+ * 	bne,pn	%xcc, tsb_miss_{d,i}tlb
+ * 	 mov		FAULT_CODE_{D,I}TLB, %g3
+ * 	stxa		%g5, [%g0] ASI_{D,I}TLB_DATA_IN
+ * 	retry
+ *
+ *
+ * Each 16-byte slot of the TSB is the 8-byte tag and then the 8-byte
+ * PTE.  The TAG is of the same layout as the TLB TAG TARGET mmu
+ * register which is:
+ *
+ * -------------------------------------------------
+ * |  -  |  CONTEXT |  -  |    VADDR bits 63:22    |
+ * -------------------------------------------------
+ *  63 61 60      48 47 42 41                     0
+ *
+ * But actually, since we use per-mm TSB's, we zero out the CONTEXT
+ * field.
+ *
+ * Like the powerpc hashtables we need to use locking in order to
+ * synchronize while we update the entries.  PTE updates need locking
+ * as well.
+ *
+ * We need to carefully choose a lock bits for the TSB entry.  We
+ * choose to use bit 47 in the tag.  Also, since we never map anything
+ * at page zero in context zero, we use zero as an invalid tag entry.
+ * When the lock bit is set, this forces a tag comparison failure.
+ */
+
+#define TSB_TAG_LOCK_BIT	47
+#define TSB_TAG_LOCK_HIGH	(1 << (TSB_TAG_LOCK_BIT - 32))
+
+#define TSB_TAG_INVALID_BIT	46
+#define TSB_TAG_INVALID_HIGH	(1 << (TSB_TAG_INVALID_BIT - 32))
+
+#define TSB_MEMBAR	membar	#StoreStore
+
+/* Some cpus support physical address quad loads.  We want to use
+ * those if possible so we don't need to hard-lock the TSB mapping
+ * into the TLB.  We encode some instruction patching in order to
+ * support this.
+ *
+ * The kernel TSB is locked into the TLB by virtue of being in the
+ * kernel image, so we don't play these games for swapper_tsb access.
+ */
+#ifndef __ASSEMBLY__
+struct tsb_ldquad_phys_patch_entry {
+	unsigned int	addr;
+	unsigned int	sun4u_insn;
+	unsigned int	sun4v_insn;
+};
+extern struct tsb_ldquad_phys_patch_entry __tsb_ldquad_phys_patch,
+	__tsb_ldquad_phys_patch_end;
+
+struct tsb_phys_patch_entry {
+	unsigned int	addr;
+	unsigned int	insn;
+};
+extern struct tsb_phys_patch_entry __tsb_phys_patch, __tsb_phys_patch_end;
+#endif
+#define TSB_LOAD_QUAD(TSB, REG)	\
+661:	ldda		[TSB] ASI_NUCLEUS_QUAD_LDD, REG; \
+	.section	.tsb_ldquad_phys_patch, "ax"; \
+	.word		661b; \
+	ldda		[TSB] ASI_QUAD_LDD_PHYS, REG; \
+	ldda		[TSB] ASI_QUAD_LDD_PHYS_4V, REG; \
+	.previous
+
+#define TSB_LOAD_TAG_HIGH(TSB, REG) \
+661:	lduwa		[TSB] ASI_N, REG; \
+	.section	.tsb_phys_patch, "ax"; \
+	.word		661b; \
+	lduwa		[TSB] ASI_PHYS_USE_EC, REG; \
+	.previous
+
+#define TSB_LOAD_TAG(TSB, REG) \
+661:	ldxa		[TSB] ASI_N, REG; \
+	.section	.tsb_phys_patch, "ax"; \
+	.word		661b; \
+	ldxa		[TSB] ASI_PHYS_USE_EC, REG; \
+	.previous
+
+#define TSB_CAS_TAG_HIGH(TSB, REG1, REG2) \
+661:	casa		[TSB] ASI_N, REG1, REG2; \
+	.section	.tsb_phys_patch, "ax"; \
+	.word		661b; \
+	casa		[TSB] ASI_PHYS_USE_EC, REG1, REG2; \
+	.previous
+
+#define TSB_CAS_TAG(TSB, REG1, REG2) \
+661:	casxa		[TSB] ASI_N, REG1, REG2; \
+	.section	.tsb_phys_patch, "ax"; \
+	.word		661b; \
+	casxa		[TSB] ASI_PHYS_USE_EC, REG1, REG2; \
+	.previous
+
+#define TSB_STORE(ADDR, VAL) \
+661:	stxa		VAL, [ADDR] ASI_N; \
+	.section	.tsb_phys_patch, "ax"; \
+	.word		661b; \
+	stxa		VAL, [ADDR] ASI_PHYS_USE_EC; \
+	.previous
+
+#define TSB_LOCK_TAG(TSB, REG1, REG2)	\
+99:	TSB_LOAD_TAG_HIGH(TSB, REG1);	\
+	sethi	%hi(TSB_TAG_LOCK_HIGH), REG2;\
+	andcc	REG1, REG2, %g0;	\
+	bne,pn	%icc, 99b;		\
+	 nop;				\
+	TSB_CAS_TAG_HIGH(TSB, REG1, REG2);	\
+	cmp	REG1, REG2;		\
+	bne,pn	%icc, 99b;		\
+	 nop;				\
+	TSB_MEMBAR
+
+#define TSB_WRITE(TSB, TTE, TAG) \
+	add	TSB, 0x8, TSB;   \
+	TSB_STORE(TSB, TTE);     \
+	sub	TSB, 0x8, TSB;   \
+	TSB_MEMBAR;              \
+	TSB_STORE(TSB, TAG);
+
+#define KTSB_LOAD_QUAD(TSB, REG) \
+	ldda		[TSB] ASI_NUCLEUS_QUAD_LDD, REG;
+
+#define KTSB_STORE(ADDR, VAL) \
+	stxa		VAL, [ADDR] ASI_N;
+
+#define KTSB_LOCK_TAG(TSB, REG1, REG2)	\
+99:	lduwa	[TSB] ASI_N, REG1;	\
+	sethi	%hi(TSB_TAG_LOCK_HIGH), REG2;\
+	andcc	REG1, REG2, %g0;	\
+	bne,pn	%icc, 99b;		\
+	 nop;				\
+	casa	[TSB] ASI_N, REG1, REG2;\
+	cmp	REG1, REG2;		\
+	bne,pn	%icc, 99b;		\
+	 nop;				\
+	TSB_MEMBAR
+
+#define KTSB_WRITE(TSB, TTE, TAG) \
+	add	TSB, 0x8, TSB;   \
+	stxa	TTE, [TSB] ASI_N;     \
+	sub	TSB, 0x8, TSB;   \
+	TSB_MEMBAR;              \
+	stxa	TAG, [TSB] ASI_N;
+
+	/* Do a kernel page table walk.  Leaves physical PTE pointer in
+	 * REG1.  Jumps to FAIL_LABEL on early page table walk termination.
+	 * VADDR will not be clobbered, but REG2 will.
+	 */
+#define KERN_PGTABLE_WALK(VADDR, REG1, REG2, FAIL_LABEL)	\
+	sethi		%hi(swapper_pg_dir), REG1; \
+	or		REG1, %lo(swapper_pg_dir), REG1; \
+	sllx		VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \
+	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
+	andn		REG2, 0x3, REG2; \
+	lduw		[REG1 + REG2], REG1; \
+	brz,pn		REG1, FAIL_LABEL; \
+	 sllx		VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \
+	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
+	sllx		REG1, 11, REG1; \
+	andn		REG2, 0x3, REG2; \
+	lduwa		[REG1 + REG2] ASI_PHYS_USE_EC, REG1; \
+	brz,pn		REG1, FAIL_LABEL; \
+	 sllx		VADDR, 64 - PMD_SHIFT, REG2; \
+	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
+	sllx		REG1, 11, REG1; \
+	andn		REG2, 0x7, REG2; \
+	add		REG1, REG2, REG1;
+
+	/* Do a user page table walk in MMU globals.  Leaves physical PTE
+	 * pointer in REG1.  Jumps to FAIL_LABEL on early page table walk
+	 * termination.  Physical base of page tables is in PHYS_PGD which
+	 * will not be modified.
+	 *
+	 * VADDR will not be clobbered, but REG1 and REG2 will.
+	 */
+#define USER_PGTABLE_WALK_TL1(VADDR, PHYS_PGD, REG1, REG2, FAIL_LABEL)	\
+	sllx		VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \
+	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
+	andn		REG2, 0x3, REG2; \
+	lduwa		[PHYS_PGD + REG2] ASI_PHYS_USE_EC, REG1; \
+	brz,pn		REG1, FAIL_LABEL; \
+	 sllx		VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \
+	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
+	sllx		REG1, 11, REG1; \
+	andn		REG2, 0x3, REG2; \
+	lduwa		[REG1 + REG2] ASI_PHYS_USE_EC, REG1; \
+	brz,pn		REG1, FAIL_LABEL; \
+	 sllx		VADDR, 64 - PMD_SHIFT, REG2; \
+	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
+	sllx		REG1, 11, REG1; \
+	andn		REG2, 0x7, REG2; \
+	add		REG1, REG2, REG1;
+
+/* Lookup a OBP mapping on VADDR in the prom_trans[] table at TL>0.
+ * If no entry is found, FAIL_LABEL will be branched to.  On success
+ * the resulting PTE value will be left in REG1.  VADDR is preserved
+ * by this routine.
+ */
+#define OBP_TRANS_LOOKUP(VADDR, REG1, REG2, REG3, FAIL_LABEL) \
+	sethi		%hi(prom_trans), REG1; \
+	or		REG1, %lo(prom_trans), REG1; \
+97:	ldx		[REG1 + 0x00], REG2; \
+	brz,pn		REG2, FAIL_LABEL; \
+	 nop; \
+	ldx		[REG1 + 0x08], REG3; \
+	add		REG2, REG3, REG3; \
+	cmp		REG2, VADDR; \
+	bgu,pt		%xcc, 98f; \
+	 cmp		VADDR, REG3; \
+	bgeu,pt		%xcc, 98f; \
+	 ldx		[REG1 + 0x10], REG3; \
+	sub		VADDR, REG2, REG2; \
+	ba,pt		%xcc, 99f; \
+	 add		REG3, REG2, REG1; \
+98:	ba,pt		%xcc, 97b; \
+	 add		REG1, (3 * 8), REG1; \
+99:
+
+	/* We use a 32K TSB for the whole kernel, this allows to
+	 * handle about 16MB of modules and vmalloc mappings without
+	 * incurring many hash conflicts.
+	 */
+#define KERNEL_TSB_SIZE_BYTES	(32 * 1024)
+#define KERNEL_TSB_NENTRIES	\
+	(KERNEL_TSB_SIZE_BYTES / 16)
+#define KERNEL_TSB4M_NENTRIES	4096
+
+	/* Do a kernel TSB lookup at tl>0 on VADDR+TAG, branch to OK_LABEL
+	 * on TSB hit.  REG1, REG2, REG3, and REG4 are used as temporaries
+	 * and the found TTE will be left in REG1.  REG3 and REG4 must
+	 * be an even/odd pair of registers.
+	 *
+	 * VADDR and TAG will be preserved and not clobbered by this macro.
+	 */
+#define KERN_TSB_LOOKUP_TL1(VADDR, TAG, REG1, REG2, REG3, REG4, OK_LABEL) \
+	sethi		%hi(swapper_tsb), REG1; \
+	or		REG1, %lo(swapper_tsb), REG1; \
+	srlx		VADDR, PAGE_SHIFT, REG2; \
+	and		REG2, (KERNEL_TSB_NENTRIES - 1), REG2; \
+	sllx		REG2, 4, REG2; \
+	add		REG1, REG2, REG2; \
+	KTSB_LOAD_QUAD(REG2, REG3); \
+	cmp		REG3, TAG; \
+	be,a,pt		%xcc, OK_LABEL; \
+	 mov		REG4, REG1;
+
+#ifndef CONFIG_DEBUG_PAGEALLOC
+	/* This version uses a trick, the TAG is already (VADDR >> 22) so
+	 * we can make use of that for the index computation.
+	 */
+#define KERN_TSB4M_LOOKUP_TL1(TAG, REG1, REG2, REG3, REG4, OK_LABEL) \
+	sethi		%hi(swapper_4m_tsb), REG1; \
+	or		REG1, %lo(swapper_4m_tsb), REG1; \
+	and		TAG, (KERNEL_TSB4M_NENTRIES - 1), REG2; \
+	sllx		REG2, 4, REG2; \
+	add		REG1, REG2, REG2; \
+	KTSB_LOAD_QUAD(REG2, REG3); \
+	cmp		REG3, TAG; \
+	be,a,pt		%xcc, OK_LABEL; \
+	 mov		REG4, REG1;
+#endif
+
+#endif /* !(_SPARC64_TSB_H) */
diff --git a/arch/sparc/include/asm/tsunami.h b/arch/sparc/include/asm/tsunami.h
new file mode 100644
index 0000000..5bbd1d5
--- /dev/null
+++ b/arch/sparc/include/asm/tsunami.h
@@ -0,0 +1,64 @@
+/*
+ * tsunami.h:  Module specific definitions for Tsunami V8 Sparcs
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_TSUNAMI_H
+#define _SPARC_TSUNAMI_H
+
+#include <asm/asi.h>
+
+/* The MMU control register on the Tsunami:
+ *
+ * -----------------------------------------------------------------------
+ * | implvers |SW|AV|DV|MV| RSV |PC|ITD|ALC| RSV |PE| RC |IE|DE|RSV|NF|ME|
+ * -----------------------------------------------------------------------
+ *  31      24 23 22 21 20 19-18 17  16 14  13-12 11 10-9  8  7 6-2  1  0
+ *
+ * SW: Enable Software Table Walks  0=off 1=on
+ * AV: Address View bit
+ * DV: Data View bit
+ * MV: Memory View bit
+ * PC: Parity Control
+ * ITD: ITBR disable
+ * ALC: Alternate Cacheable
+ * PE: Parity Enable   0=off 1=on
+ * RC: Refresh Control
+ * IE: Instruction cache Enable  0=off 1=on
+ * DE: Data cache Enable  0=off 1=on
+ * NF: No Fault, same as all other SRMMUs
+ * ME: MMU Enable, same as all other SRMMUs
+ */
+
+#define TSUNAMI_SW        0x00800000
+#define TSUNAMI_AV        0x00400000
+#define TSUNAMI_DV        0x00200000
+#define TSUNAMI_MV        0x00100000
+#define TSUNAMI_PC        0x00020000
+#define TSUNAMI_ITD       0x00010000
+#define TSUNAMI_ALC       0x00008000
+#define TSUNAMI_PE        0x00001000
+#define TSUNAMI_RCMASK    0x00000C00
+#define TSUNAMI_IENAB     0x00000200
+#define TSUNAMI_DENAB     0x00000100
+#define TSUNAMI_NF        0x00000002
+#define TSUNAMI_ME        0x00000001
+
+static inline void tsunami_flush_icache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_IC_FLCLEAR)
+			     : "memory");
+}
+
+static inline void tsunami_flush_dcache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_DC_FLCLEAR)
+			     : "memory");
+}
+
+#endif /* !(_SPARC_TSUNAMI_H) */
diff --git a/arch/sparc/include/asm/ttable.h b/arch/sparc/include/asm/ttable.h
new file mode 100644
index 0000000..5708ba2
--- /dev/null
+++ b/arch/sparc/include/asm/ttable.h
@@ -0,0 +1,658 @@
+#ifndef _SPARC64_TTABLE_H
+#define _SPARC64_TTABLE_H
+
+#include <asm/utrap.h>
+
+#ifdef __ASSEMBLY__
+#include <asm/thread_info.h>
+#endif
+
+#define BOOT_KERNEL b sparc64_boot; nop; nop; nop; nop; nop; nop; nop;
+
+/* We need a "cleaned" instruction... */
+#define CLEAN_WINDOW							\
+	rdpr	%cleanwin, %l0;		add	%l0, 1, %l0;		\
+	wrpr	%l0, 0x0, %cleanwin;					\
+	clr	%o0;	clr	%o1;	clr	%o2;	clr	%o3;	\
+	clr	%o4;	clr	%o5;	clr	%o6;	clr	%o7;	\
+	clr	%l0;	clr	%l1;	clr	%l2;	clr	%l3;	\
+	clr	%l4;	clr	%l5;	clr	%l6;	clr	%l7;	\
+	retry;								\
+	nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;
+
+#define TRAP(routine)					\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, etrap;				\
+109:	 or	%g7, %lo(109b), %g7;			\
+	call	routine;				\
+	 add	%sp, PTREGS_OFF, %o0;			\
+	ba,pt	%xcc, rtrap;				\
+	 nop;						\
+	nop;
+
+#define TRAP_7INSNS(routine)				\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, etrap;				\
+109:	 or	%g7, %lo(109b), %g7;			\
+	call	routine;				\
+	 add	%sp, PTREGS_OFF, %o0;			\
+	ba,pt	%xcc, rtrap;				\
+	 nop;
+
+#define TRAP_SAVEFPU(routine)				\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, do_fptrap;			\
+109:	 or	%g7, %lo(109b), %g7;			\
+	call	routine;				\
+	 add	%sp, PTREGS_OFF, %o0;			\
+	ba,pt	%xcc, rtrap;				\
+	 nop;						\
+	nop;
+
+#define TRAP_NOSAVE(routine)				\
+	ba,pt	%xcc, routine;				\
+	 nop;						\
+	nop; nop; nop; nop; nop; nop;
+
+#define TRAP_NOSAVE_7INSNS(routine)			\
+	ba,pt	%xcc, routine;				\
+	 nop;						\
+	nop; nop; nop; nop; nop;
+
+#define TRAPTL1(routine)				\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, etraptl1;				\
+109:	 or	%g7, %lo(109b), %g7;			\
+	call	routine;				\
+	 add	%sp, PTREGS_OFF, %o0;			\
+	ba,pt	%xcc, rtrap;				\
+	 nop;						\
+	nop;
+
+#define TRAP_ARG(routine, arg)				\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, etrap;				\
+109:	 or	%g7, %lo(109b), %g7;			\
+	add	%sp, PTREGS_OFF, %o0;			\
+	call	routine;				\
+	 mov	arg, %o1;				\
+	ba,pt	%xcc, rtrap;				\
+	 nop;
+
+#define TRAPTL1_ARG(routine, arg)			\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, etraptl1;				\
+109:	 or	%g7, %lo(109b), %g7;			\
+	add	%sp, PTREGS_OFF, %o0;			\
+	call	routine;				\
+	 mov	arg, %o1;				\
+	ba,pt	%xcc, rtrap;				\
+	 nop;
+
+#define SYSCALL_TRAP(routine, systbl)			\
+	rdpr	%pil, %g2;				\
+	mov	TSTATE_SYSCALL, %g3;			\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, etrap_syscall;			\
+109:	 or	%g7, %lo(109b), %g7;			\
+	sethi	%hi(systbl), %l7;			\
+	ba,pt	%xcc, routine;				\
+	 or	%l7, %lo(systbl), %l7;
+
+#define TRAP_UTRAP(handler,lvl)				\
+	mov	handler, %g3;				\
+	ba,pt	%xcc, utrap_trap;			\
+	 mov	lvl, %g4;				\
+	nop;						\
+	nop;						\
+	nop;						\
+	nop;						\
+	nop;
+
+#ifdef CONFIG_COMPAT
+#define	LINUX_32BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall32, sys_call_table32)
+#else
+#define	LINUX_32BIT_SYSCALL_TRAP BTRAP(0x110)
+#endif
+#define LINUX_64BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall, sys_call_table64)
+#define GETCC_TRAP TRAP(getcc)
+#define SETCC_TRAP TRAP(setcc)
+#define BREAKPOINT_TRAP TRAP(breakpoint_trap)
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+
+#define TRAP_IRQ(routine, level)			\
+	rdpr	%pil, %g2;				\
+	wrpr	%g0, 15, %pil;				\
+	sethi	%hi(1f-4), %g7;				\
+	ba,pt	%xcc, etrap_irq;			\
+	 or	%g7, %lo(1f-4), %g7;			\
+	nop;						\
+	nop;						\
+	nop;						\
+	.subsection	2;				\
+1:	call	trace_hardirqs_off;			\
+	 nop;						\
+	mov	level, %o0;				\
+	call	routine;				\
+	 add	%sp, PTREGS_OFF, %o1;			\
+	ba,a,pt	%xcc, rtrap_irq;			\
+	.previous;
+
+#else
+
+#define TRAP_IRQ(routine, level)			\
+	rdpr	%pil, %g2;				\
+	wrpr	%g0, 15, %pil;				\
+	ba,pt	%xcc, etrap_irq;			\
+	 rd	%pc, %g7;				\
+	mov	level, %o0;				\
+	call	routine;				\
+	 add	%sp, PTREGS_OFF, %o1;			\
+	ba,a,pt	%xcc, rtrap_irq;
+
+#endif
+
+#define TRAP_IVEC TRAP_NOSAVE(do_ivec)
+
+#define BTRAP(lvl) TRAP_ARG(bad_trap, lvl)
+
+#define BTRAPTL1(lvl) TRAPTL1_ARG(bad_trap_tl1, lvl)
+
+#define FLUSH_WINDOW_TRAP						\
+	ba,pt	%xcc, etrap;						\
+	 rd	%pc, %g7;						\
+	flushw;								\
+	ldx	[%sp + PTREGS_OFF + PT_V9_TNPC], %l1;			\
+	add	%l1, 4, %l2;						\
+	stx	%l1, [%sp + PTREGS_OFF + PT_V9_TPC];			\
+	ba,pt	%xcc, rtrap;						\
+	 stx	%l2, [%sp + PTREGS_OFF + PT_V9_TNPC];
+
+#ifdef CONFIG_KPROBES
+#define KPROBES_TRAP(lvl) TRAP_IRQ(kprobe_trap, lvl)
+#else
+#define KPROBES_TRAP(lvl) TRAP_ARG(bad_trap, lvl)
+#endif
+
+#ifdef CONFIG_KGDB
+#define KGDB_TRAP(lvl) TRAP_IRQ(kgdb_trap, lvl)
+#else
+#define KGDB_TRAP(lvl) TRAP_ARG(bad_trap, lvl)
+#endif
+
+#define SUN4V_ITSB_MISS					\
+	ldxa	[%g0] ASI_SCRATCHPAD, %g2;		\
+	ldx	[%g2 + HV_FAULT_I_ADDR_OFFSET], %g4;	\
+	ldx	[%g2 + HV_FAULT_I_CTX_OFFSET], %g5;	\
+	srlx	%g4, 22, %g6;				\
+	ba,pt	%xcc, sun4v_itsb_miss;			\
+	 nop;						\
+	nop;						\
+	nop;
+
+#define SUN4V_DTSB_MISS					\
+	ldxa	[%g0] ASI_SCRATCHPAD, %g2;		\
+	ldx	[%g2 + HV_FAULT_D_ADDR_OFFSET], %g4;	\
+	ldx	[%g2 + HV_FAULT_D_CTX_OFFSET], %g5;	\
+	srlx	%g4, 22, %g6;				\
+	ba,pt	%xcc, sun4v_dtsb_miss;			\
+	 nop;						\
+	nop;						\
+	nop;
+
+/* Before touching these macros, you owe it to yourself to go and
+ * see how arch/sparc64/kernel/winfixup.S works... -DaveM
+ *
+ * For the user cases we used to use the %asi register, but
+ * it turns out that the "wr xxx, %asi" costs ~5 cycles, so
+ * now we use immediate ASI loads and stores instead.  Kudos
+ * to Greg Onufer for pointing out this performance anomaly.
+ *
+ * Further note that we cannot use the g2, g4, g5, and g7 alternate
+ * globals in the spill routines, check out the save instruction in
+ * arch/sparc64/kernel/etrap.S to see what I mean about g2, and
+ * g4/g5 are the globals which are preserved by etrap processing
+ * for the caller of it.  The g7 register is the return pc for
+ * etrap.  Finally, g6 is the current thread register so we cannot
+ * us it in the spill handlers either.  Most of these rules do not
+ * apply to fill processing, only g6 is not usable.
+ */
+
+/* Normal kernel spill */
+#define SPILL_0_NORMAL					\
+	stx	%l0, [%sp + STACK_BIAS + 0x00];		\
+	stx	%l1, [%sp + STACK_BIAS + 0x08];		\
+	stx	%l2, [%sp + STACK_BIAS + 0x10];		\
+	stx	%l3, [%sp + STACK_BIAS + 0x18];		\
+	stx	%l4, [%sp + STACK_BIAS + 0x20];		\
+	stx	%l5, [%sp + STACK_BIAS + 0x28];		\
+	stx	%l6, [%sp + STACK_BIAS + 0x30];		\
+	stx	%l7, [%sp + STACK_BIAS + 0x38];		\
+	stx	%i0, [%sp + STACK_BIAS + 0x40];		\
+	stx	%i1, [%sp + STACK_BIAS + 0x48];		\
+	stx	%i2, [%sp + STACK_BIAS + 0x50];		\
+	stx	%i3, [%sp + STACK_BIAS + 0x58];		\
+	stx	%i4, [%sp + STACK_BIAS + 0x60];		\
+	stx	%i5, [%sp + STACK_BIAS + 0x68];		\
+	stx	%i6, [%sp + STACK_BIAS + 0x70];		\
+	stx	%i7, [%sp + STACK_BIAS + 0x78];		\
+	saved; retry; nop; nop; nop; nop; nop; nop;	\
+	nop; nop; nop; nop; nop; nop; nop; nop;
+
+#define SPILL_0_NORMAL_ETRAP				\
+etrap_kernel_spill:					\
+	stx	%l0, [%sp + STACK_BIAS + 0x00];		\
+	stx	%l1, [%sp + STACK_BIAS + 0x08];		\
+	stx	%l2, [%sp + STACK_BIAS + 0x10];		\
+	stx	%l3, [%sp + STACK_BIAS + 0x18];		\
+	stx	%l4, [%sp + STACK_BIAS + 0x20];		\
+	stx	%l5, [%sp + STACK_BIAS + 0x28];		\
+	stx	%l6, [%sp + STACK_BIAS + 0x30];		\
+	stx	%l7, [%sp + STACK_BIAS + 0x38];		\
+	stx	%i0, [%sp + STACK_BIAS + 0x40];		\
+	stx	%i1, [%sp + STACK_BIAS + 0x48];		\
+	stx	%i2, [%sp + STACK_BIAS + 0x50];		\
+	stx	%i3, [%sp + STACK_BIAS + 0x58];		\
+	stx	%i4, [%sp + STACK_BIAS + 0x60];		\
+	stx	%i5, [%sp + STACK_BIAS + 0x68];		\
+	stx	%i6, [%sp + STACK_BIAS + 0x70];		\
+	stx	%i7, [%sp + STACK_BIAS + 0x78];		\
+	saved;						\
+	sub	%g1, 2, %g1;				\
+	ba,pt	%xcc, etrap_save;			\
+	wrpr	%g1, %cwp;				\
+	nop; nop; nop; nop; nop; nop; nop; nop;		\
+	nop; nop; nop; nop;
+
+/* Normal 64bit spill */
+#define SPILL_1_GENERIC(ASI)				\
+	add	%sp, STACK_BIAS + 0x00, %g1;		\
+	stxa	%l0, [%g1 + %g0] ASI;			\
+	mov	0x08, %g3;				\
+	stxa	%l1, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%l2, [%g1 + %g0] ASI;			\
+	stxa	%l3, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%l4, [%g1 + %g0] ASI;			\
+	stxa	%l5, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%l6, [%g1 + %g0] ASI;			\
+	stxa	%l7, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%i0, [%g1 + %g0] ASI;			\
+	stxa	%i1, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%i2, [%g1 + %g0] ASI;			\
+	stxa	%i3, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%i4, [%g1 + %g0] ASI;			\
+	stxa	%i5, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%i6, [%g1 + %g0] ASI;			\
+	stxa	%i7, [%g1 + %g3] ASI;			\
+	saved;						\
+	retry; nop; nop;				\
+	b,a,pt	%xcc, spill_fixup_dax;			\
+	b,a,pt	%xcc, spill_fixup_mna;			\
+	b,a,pt	%xcc, spill_fixup;
+
+#define SPILL_1_GENERIC_ETRAP				\
+etrap_user_spill_64bit:					\
+	stxa	%l0, [%sp + STACK_BIAS + 0x00] %asi;	\
+	stxa	%l1, [%sp + STACK_BIAS + 0x08] %asi;	\
+	stxa	%l2, [%sp + STACK_BIAS + 0x10] %asi;	\
+	stxa	%l3, [%sp + STACK_BIAS + 0x18] %asi;	\
+	stxa	%l4, [%sp + STACK_BIAS + 0x20] %asi;	\
+	stxa	%l5, [%sp + STACK_BIAS + 0x28] %asi;	\
+	stxa	%l6, [%sp + STACK_BIAS + 0x30] %asi;	\
+	stxa	%l7, [%sp + STACK_BIAS + 0x38] %asi;	\
+	stxa	%i0, [%sp + STACK_BIAS + 0x40] %asi;	\
+	stxa	%i1, [%sp + STACK_BIAS + 0x48] %asi;	\
+	stxa	%i2, [%sp + STACK_BIAS + 0x50] %asi;	\
+	stxa	%i3, [%sp + STACK_BIAS + 0x58] %asi;	\
+	stxa	%i4, [%sp + STACK_BIAS + 0x60] %asi;	\
+	stxa	%i5, [%sp + STACK_BIAS + 0x68] %asi;	\
+	stxa	%i6, [%sp + STACK_BIAS + 0x70] %asi;	\
+	stxa	%i7, [%sp + STACK_BIAS + 0x78] %asi;	\
+	saved;						\
+	sub	%g1, 2, %g1;				\
+	ba,pt	%xcc, etrap_save;			\
+	 wrpr	%g1, %cwp;				\
+	nop; nop; nop; nop; nop;			\
+	nop; nop; nop; nop;				\
+	ba,a,pt	%xcc, etrap_spill_fixup_64bit;		\
+	ba,a,pt	%xcc, etrap_spill_fixup_64bit;		\
+	ba,a,pt	%xcc, etrap_spill_fixup_64bit;
+
+#define SPILL_1_GENERIC_ETRAP_FIXUP			\
+etrap_spill_fixup_64bit:				\
+	ldub	[%g6 + TI_WSAVED], %g1;			\
+	sll	%g1, 3, %g3;				\
+	add	%g6, %g3, %g3;				\
+	stx	%sp, [%g3 + TI_RWIN_SPTRS];		\
+	sll	%g1, 7, %g3;				\
+	add	%g6, %g3, %g3;				\
+	stx	%l0, [%g3 + TI_REG_WINDOW + 0x00];	\
+	stx	%l1, [%g3 + TI_REG_WINDOW + 0x08];	\
+	stx	%l2, [%g3 + TI_REG_WINDOW + 0x10];	\
+	stx	%l3, [%g3 + TI_REG_WINDOW + 0x18];	\
+	stx	%l4, [%g3 + TI_REG_WINDOW + 0x20];	\
+	stx	%l5, [%g3 + TI_REG_WINDOW + 0x28];	\
+	stx	%l6, [%g3 + TI_REG_WINDOW + 0x30];	\
+	stx	%l7, [%g3 + TI_REG_WINDOW + 0x38];	\
+	stx	%i0, [%g3 + TI_REG_WINDOW + 0x40];	\
+	stx	%i1, [%g3 + TI_REG_WINDOW + 0x48];	\
+	stx	%i2, [%g3 + TI_REG_WINDOW + 0x50];	\
+	stx	%i3, [%g3 + TI_REG_WINDOW + 0x58];	\
+	stx	%i4, [%g3 + TI_REG_WINDOW + 0x60];	\
+	stx	%i5, [%g3 + TI_REG_WINDOW + 0x68];	\
+	stx	%i6, [%g3 + TI_REG_WINDOW + 0x70];	\
+	stx	%i7, [%g3 + TI_REG_WINDOW + 0x78];	\
+	add	%g1, 1, %g1;				\
+	stb	%g1, [%g6 + TI_WSAVED];			\
+	saved;						\
+	rdpr	%cwp, %g1;				\
+	sub	%g1, 2, %g1;				\
+	ba,pt	%xcc, etrap_save;			\
+	 wrpr	%g1, %cwp;				\
+	nop; nop; nop
+
+/* Normal 32bit spill */
+#define SPILL_2_GENERIC(ASI)				\
+	srl	%sp, 0, %sp;				\
+	stwa	%l0, [%sp + %g0] ASI;			\
+	mov	0x04, %g3;				\
+	stwa	%l1, [%sp + %g3] ASI;			\
+	add	%sp, 0x08, %g1;				\
+	stwa	%l2, [%g1 + %g0] ASI;			\
+	stwa	%l3, [%g1 + %g3] ASI;			\
+	add	%g1, 0x08, %g1;				\
+	stwa	%l4, [%g1 + %g0] ASI;			\
+	stwa	%l5, [%g1 + %g3] ASI;			\
+	add	%g1, 0x08, %g1;				\
+	stwa	%l6, [%g1 + %g0] ASI;			\
+	stwa	%l7, [%g1 + %g3] ASI;			\
+	add	%g1, 0x08, %g1;				\
+	stwa	%i0, [%g1 + %g0] ASI;			\
+	stwa	%i1, [%g1 + %g3] ASI;			\
+	add	%g1, 0x08, %g1;				\
+	stwa	%i2, [%g1 + %g0] ASI;			\
+	stwa	%i3, [%g1 + %g3] ASI;			\
+	add	%g1, 0x08, %g1;				\
+	stwa	%i4, [%g1 + %g0] ASI;			\
+	stwa	%i5, [%g1 + %g3] ASI;			\
+	add	%g1, 0x08, %g1;				\
+	stwa	%i6, [%g1 + %g0] ASI;			\
+	stwa	%i7, [%g1 + %g3] ASI;			\
+	saved;						\
+        retry; nop; nop;				\
+	b,a,pt	%xcc, spill_fixup_dax;			\
+	b,a,pt	%xcc, spill_fixup_mna;			\
+	b,a,pt	%xcc, spill_fixup;
+
+#define SPILL_2_GENERIC_ETRAP		\
+etrap_user_spill_32bit:			\
+	srl	%sp, 0, %sp;		\
+	stwa	%l0, [%sp + 0x00] %asi;	\
+	stwa	%l1, [%sp + 0x04] %asi;	\
+	stwa	%l2, [%sp + 0x08] %asi;	\
+	stwa	%l3, [%sp + 0x0c] %asi;	\
+	stwa	%l4, [%sp + 0x10] %asi;	\
+	stwa	%l5, [%sp + 0x14] %asi;	\
+	stwa	%l6, [%sp + 0x18] %asi;	\
+	stwa	%l7, [%sp + 0x1c] %asi;	\
+	stwa	%i0, [%sp + 0x20] %asi;	\
+	stwa	%i1, [%sp + 0x24] %asi;	\
+	stwa	%i2, [%sp + 0x28] %asi;	\
+	stwa	%i3, [%sp + 0x2c] %asi;	\
+	stwa	%i4, [%sp + 0x30] %asi;	\
+	stwa	%i5, [%sp + 0x34] %asi;	\
+	stwa	%i6, [%sp + 0x38] %asi;	\
+	stwa	%i7, [%sp + 0x3c] %asi;	\
+	saved;				\
+	sub	%g1, 2, %g1;		\
+	ba,pt	%xcc, etrap_save;	\
+	 wrpr	%g1, %cwp;		\
+	nop; nop; nop; nop;		\
+	nop; nop; nop; nop;		\
+	ba,a,pt	%xcc, etrap_spill_fixup_32bit; \
+	ba,a,pt	%xcc, etrap_spill_fixup_32bit; \
+	ba,a,pt	%xcc, etrap_spill_fixup_32bit;
+
+#define SPILL_2_GENERIC_ETRAP_FIXUP			\
+etrap_spill_fixup_32bit:				\
+	ldub	[%g6 + TI_WSAVED], %g1;			\
+	sll	%g1, 3, %g3;				\
+	add	%g6, %g3, %g3;				\
+	stx	%sp, [%g3 + TI_RWIN_SPTRS];		\
+	sll	%g1, 7, %g3;				\
+	add	%g6, %g3, %g3;				\
+	stw	%l0, [%g3 + TI_REG_WINDOW + 0x00];	\
+	stw	%l1, [%g3 + TI_REG_WINDOW + 0x04];	\
+	stw	%l2, [%g3 + TI_REG_WINDOW + 0x08];	\
+	stw	%l3, [%g3 + TI_REG_WINDOW + 0x0c];	\
+	stw	%l4, [%g3 + TI_REG_WINDOW + 0x10];	\
+	stw	%l5, [%g3 + TI_REG_WINDOW + 0x14];	\
+	stw	%l6, [%g3 + TI_REG_WINDOW + 0x18];	\
+	stw	%l7, [%g3 + TI_REG_WINDOW + 0x1c];	\
+	stw	%i0, [%g3 + TI_REG_WINDOW + 0x20];	\
+	stw	%i1, [%g3 + TI_REG_WINDOW + 0x24];	\
+	stw	%i2, [%g3 + TI_REG_WINDOW + 0x28];	\
+	stw	%i3, [%g3 + TI_REG_WINDOW + 0x2c];	\
+	stw	%i4, [%g3 + TI_REG_WINDOW + 0x30];	\
+	stw	%i5, [%g3 + TI_REG_WINDOW + 0x34];	\
+	stw	%i6, [%g3 + TI_REG_WINDOW + 0x38];	\
+	stw	%i7, [%g3 + TI_REG_WINDOW + 0x3c];	\
+	add	%g1, 1, %g1;				\
+	stb	%g1, [%g6 + TI_WSAVED];			\
+	saved;						\
+	rdpr	%cwp, %g1;				\
+	sub	%g1, 2, %g1;				\
+	ba,pt	%xcc, etrap_save;			\
+	 wrpr	%g1, %cwp;				\
+	nop; nop; nop
+
+#define SPILL_1_NORMAL SPILL_1_GENERIC(ASI_AIUP)
+#define SPILL_2_NORMAL SPILL_2_GENERIC(ASI_AIUP)
+#define SPILL_3_NORMAL SPILL_0_NORMAL
+#define SPILL_4_NORMAL SPILL_0_NORMAL
+#define SPILL_5_NORMAL SPILL_0_NORMAL
+#define SPILL_6_NORMAL SPILL_0_NORMAL
+#define SPILL_7_NORMAL SPILL_0_NORMAL
+
+#define SPILL_0_OTHER SPILL_0_NORMAL
+#define SPILL_1_OTHER SPILL_1_GENERIC(ASI_AIUS)
+#define SPILL_2_OTHER SPILL_2_GENERIC(ASI_AIUS)
+#define SPILL_3_OTHER SPILL_3_NORMAL
+#define SPILL_4_OTHER SPILL_4_NORMAL
+#define SPILL_5_OTHER SPILL_5_NORMAL
+#define SPILL_6_OTHER SPILL_6_NORMAL
+#define SPILL_7_OTHER SPILL_7_NORMAL
+
+/* Normal kernel fill */
+#define FILL_0_NORMAL					\
+	ldx	[%sp + STACK_BIAS + 0x00], %l0;		\
+	ldx	[%sp + STACK_BIAS + 0x08], %l1;		\
+	ldx	[%sp + STACK_BIAS + 0x10], %l2;		\
+	ldx	[%sp + STACK_BIAS + 0x18], %l3;		\
+	ldx	[%sp + STACK_BIAS + 0x20], %l4;		\
+	ldx	[%sp + STACK_BIAS + 0x28], %l5;		\
+	ldx	[%sp + STACK_BIAS + 0x30], %l6;		\
+	ldx	[%sp + STACK_BIAS + 0x38], %l7;		\
+	ldx	[%sp + STACK_BIAS + 0x40], %i0;		\
+	ldx	[%sp + STACK_BIAS + 0x48], %i1;		\
+	ldx	[%sp + STACK_BIAS + 0x50], %i2;		\
+	ldx	[%sp + STACK_BIAS + 0x58], %i3;		\
+	ldx	[%sp + STACK_BIAS + 0x60], %i4;		\
+	ldx	[%sp + STACK_BIAS + 0x68], %i5;		\
+	ldx	[%sp + STACK_BIAS + 0x70], %i6;		\
+	ldx	[%sp + STACK_BIAS + 0x78], %i7;		\
+	restored; retry; nop; nop; nop; nop; nop; nop;	\
+	nop; nop; nop; nop; nop; nop; nop; nop;
+
+#define FILL_0_NORMAL_RTRAP				\
+kern_rtt_fill:						\
+	rdpr	%cwp, %g1;				\
+	sub	%g1, 1, %g1;				\
+	wrpr	%g1, %cwp;				\
+	ldx	[%sp + STACK_BIAS + 0x00], %l0;		\
+	ldx	[%sp + STACK_BIAS + 0x08], %l1;		\
+	ldx	[%sp + STACK_BIAS + 0x10], %l2;		\
+	ldx	[%sp + STACK_BIAS + 0x18], %l3;		\
+	ldx	[%sp + STACK_BIAS + 0x20], %l4;		\
+	ldx	[%sp + STACK_BIAS + 0x28], %l5;		\
+	ldx	[%sp + STACK_BIAS + 0x30], %l6;		\
+	ldx	[%sp + STACK_BIAS + 0x38], %l7;		\
+	ldx	[%sp + STACK_BIAS + 0x40], %i0;		\
+	ldx	[%sp + STACK_BIAS + 0x48], %i1;		\
+	ldx	[%sp + STACK_BIAS + 0x50], %i2;		\
+	ldx	[%sp + STACK_BIAS + 0x58], %i3;		\
+	ldx	[%sp + STACK_BIAS + 0x60], %i4;		\
+	ldx	[%sp + STACK_BIAS + 0x68], %i5;		\
+	ldx	[%sp + STACK_BIAS + 0x70], %i6;		\
+	ldx	[%sp + STACK_BIAS + 0x78], %i7;		\
+	restored;					\
+	add	%g1, 1, %g1;				\
+	ba,pt	%xcc, kern_rtt_restore;			\
+	 wrpr	%g1, %cwp;				\
+	nop; nop; nop; nop; nop;			\
+	nop; nop; nop; nop;
+
+
+/* Normal 64bit fill */
+#define FILL_1_GENERIC(ASI)				\
+	add	%sp, STACK_BIAS + 0x00, %g1;		\
+	ldxa	[%g1 + %g0] ASI, %l0;			\
+	mov	0x08, %g2;				\
+	mov	0x10, %g3;				\
+	ldxa	[%g1 + %g2] ASI, %l1;			\
+	mov	0x18, %g5;				\
+	ldxa	[%g1 + %g3] ASI, %l2;			\
+	ldxa	[%g1 + %g5] ASI, %l3;			\
+	add	%g1, 0x20, %g1;				\
+	ldxa	[%g1 + %g0] ASI, %l4;			\
+	ldxa	[%g1 + %g2] ASI, %l5;			\
+	ldxa	[%g1 + %g3] ASI, %l6;			\
+	ldxa	[%g1 + %g5] ASI, %l7;			\
+	add	%g1, 0x20, %g1;				\
+	ldxa	[%g1 + %g0] ASI, %i0;			\
+	ldxa	[%g1 + %g2] ASI, %i1;			\
+	ldxa	[%g1 + %g3] ASI, %i2;			\
+	ldxa	[%g1 + %g5] ASI, %i3;			\
+	add	%g1, 0x20, %g1;				\
+	ldxa	[%g1 + %g0] ASI, %i4;			\
+	ldxa	[%g1 + %g2] ASI, %i5;			\
+	ldxa	[%g1 + %g3] ASI, %i6;			\
+	ldxa	[%g1 + %g5] ASI, %i7;			\
+	restored;					\
+	retry; nop; nop; nop; nop;			\
+	b,a,pt	%xcc, fill_fixup_dax;			\
+	b,a,pt	%xcc, fill_fixup_mna;			\
+	b,a,pt	%xcc, fill_fixup;
+
+#define FILL_1_GENERIC_RTRAP				\
+user_rtt_fill_64bit:					\
+	ldxa	[%sp + STACK_BIAS + 0x00] %asi, %l0;	\
+	ldxa	[%sp + STACK_BIAS + 0x08] %asi, %l1;	\
+	ldxa	[%sp + STACK_BIAS + 0x10] %asi, %l2;	\
+	ldxa	[%sp + STACK_BIAS + 0x18] %asi, %l3;	\
+	ldxa	[%sp + STACK_BIAS + 0x20] %asi, %l4;	\
+	ldxa	[%sp + STACK_BIAS + 0x28] %asi, %l5;	\
+	ldxa	[%sp + STACK_BIAS + 0x30] %asi, %l6;	\
+	ldxa	[%sp + STACK_BIAS + 0x38] %asi, %l7;	\
+	ldxa	[%sp + STACK_BIAS + 0x40] %asi, %i0;	\
+	ldxa	[%sp + STACK_BIAS + 0x48] %asi, %i1;	\
+	ldxa	[%sp + STACK_BIAS + 0x50] %asi, %i2;	\
+	ldxa	[%sp + STACK_BIAS + 0x58] %asi, %i3;	\
+	ldxa	[%sp + STACK_BIAS + 0x60] %asi, %i4;	\
+	ldxa	[%sp + STACK_BIAS + 0x68] %asi, %i5;	\
+	ldxa	[%sp + STACK_BIAS + 0x70] %asi, %i6;	\
+	ldxa	[%sp + STACK_BIAS + 0x78] %asi, %i7;	\
+	ba,pt	%xcc, user_rtt_pre_restore;		\
+	 restored;					\
+	nop; nop; nop; nop; nop; nop;			\
+	nop; nop; nop; nop; nop;			\
+	ba,a,pt	%xcc, user_rtt_fill_fixup;		\
+	ba,a,pt	%xcc, user_rtt_fill_fixup;		\
+	ba,a,pt	%xcc, user_rtt_fill_fixup;
+
+
+/* Normal 32bit fill */
+#define FILL_2_GENERIC(ASI)				\
+	srl	%sp, 0, %sp;				\
+	lduwa	[%sp + %g0] ASI, %l0;			\
+	mov	0x04, %g2;				\
+	mov	0x08, %g3;				\
+	lduwa	[%sp + %g2] ASI, %l1;			\
+	mov	0x0c, %g5;				\
+	lduwa	[%sp + %g3] ASI, %l2;			\
+	lduwa	[%sp + %g5] ASI, %l3;			\
+	add	%sp, 0x10, %g1;				\
+	lduwa	[%g1 + %g0] ASI, %l4;			\
+	lduwa	[%g1 + %g2] ASI, %l5;			\
+	lduwa	[%g1 + %g3] ASI, %l6;			\
+	lduwa	[%g1 + %g5] ASI, %l7;			\
+	add	%g1, 0x10, %g1;				\
+	lduwa	[%g1 + %g0] ASI, %i0;			\
+	lduwa	[%g1 + %g2] ASI, %i1;			\
+	lduwa	[%g1 + %g3] ASI, %i2;			\
+	lduwa	[%g1 + %g5] ASI, %i3;			\
+	add	%g1, 0x10, %g1;				\
+	lduwa	[%g1 + %g0] ASI, %i4;			\
+	lduwa	[%g1 + %g2] ASI, %i5;			\
+	lduwa	[%g1 + %g3] ASI, %i6;			\
+	lduwa	[%g1 + %g5] ASI, %i7;			\
+	restored;					\
+	retry; nop; nop; nop; nop;			\
+	b,a,pt	%xcc, fill_fixup_dax;			\
+	b,a,pt	%xcc, fill_fixup_mna;			\
+	b,a,pt	%xcc, fill_fixup;
+
+#define FILL_2_GENERIC_RTRAP				\
+user_rtt_fill_32bit:					\
+	srl	%sp, 0, %sp;				\
+	lduwa	[%sp + 0x00] %asi, %l0;			\
+	lduwa	[%sp + 0x04] %asi, %l1;			\
+	lduwa	[%sp + 0x08] %asi, %l2;			\
+	lduwa	[%sp + 0x0c] %asi, %l3;			\
+	lduwa	[%sp + 0x10] %asi, %l4;			\
+	lduwa	[%sp + 0x14] %asi, %l5;			\
+	lduwa	[%sp + 0x18] %asi, %l6;			\
+	lduwa	[%sp + 0x1c] %asi, %l7;			\
+	lduwa	[%sp + 0x20] %asi, %i0;			\
+	lduwa	[%sp + 0x24] %asi, %i1;			\
+	lduwa	[%sp + 0x28] %asi, %i2;			\
+	lduwa	[%sp + 0x2c] %asi, %i3;			\
+	lduwa	[%sp + 0x30] %asi, %i4;			\
+	lduwa	[%sp + 0x34] %asi, %i5;			\
+	lduwa	[%sp + 0x38] %asi, %i6;			\
+	lduwa	[%sp + 0x3c] %asi, %i7;			\
+	ba,pt	%xcc, user_rtt_pre_restore;		\
+	 restored;					\
+	nop; nop; nop; nop; nop;			\
+	nop; nop; nop; nop; nop;			\
+	ba,a,pt	%xcc, user_rtt_fill_fixup;		\
+	ba,a,pt	%xcc, user_rtt_fill_fixup;		\
+	ba,a,pt	%xcc, user_rtt_fill_fixup;
+
+
+#define FILL_1_NORMAL FILL_1_GENERIC(ASI_AIUP)
+#define FILL_2_NORMAL FILL_2_GENERIC(ASI_AIUP)
+#define FILL_3_NORMAL FILL_0_NORMAL
+#define FILL_4_NORMAL FILL_0_NORMAL
+#define FILL_5_NORMAL FILL_0_NORMAL
+#define FILL_6_NORMAL FILL_0_NORMAL
+#define FILL_7_NORMAL FILL_0_NORMAL
+
+#define FILL_0_OTHER FILL_0_NORMAL
+#define FILL_1_OTHER FILL_1_GENERIC(ASI_AIUS)
+#define FILL_2_OTHER FILL_2_GENERIC(ASI_AIUS)
+#define FILL_3_OTHER FILL_3_NORMAL
+#define FILL_4_OTHER FILL_4_NORMAL
+#define FILL_5_OTHER FILL_5_NORMAL
+#define FILL_6_OTHER FILL_6_NORMAL
+#define FILL_7_OTHER FILL_7_NORMAL
+
+#endif /* !(_SPARC64_TTABLE_H) */
diff --git a/arch/sparc/include/asm/turbosparc.h b/arch/sparc/include/asm/turbosparc.h
new file mode 100644
index 0000000..17c7328
--- /dev/null
+++ b/arch/sparc/include/asm/turbosparc.h
@@ -0,0 +1,125 @@
+/*
+ * turbosparc.h:  Defines specific to the TurboSparc module.
+ *            This is SRMMU stuff.
+ *
+ * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+#ifndef _SPARC_TURBOSPARC_H
+#define _SPARC_TURBOSPARC_H
+
+#include <asm/asi.h>
+#include <asm/pgtsrmmu.h>
+
+/* Bits in the SRMMU control register for TurboSparc modules.
+ *
+ * -------------------------------------------------------------------
+ * |impl-vers| RSV| PMC |PE|PC| RSV |BM| RFR |IC|DC|PSO|RSV|ICS|NF|ME|
+ * -------------------------------------------------------------------
+ *  31    24 23-21 20-19 18 17 16-15 14 13-10  9  8  7  6-3   2  1  0
+ *
+ * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
+ *
+ * This indicates whether the TurboSparc is in boot-mode or not.
+ *
+ * IC: Instruction Cache -- 0 = off, 1 = on
+ * DC: Data Cache -- 0 = off, 1 = 0n
+ *
+ * These bits enable the on-cpu TurboSparc split I/D caches.
+ *
+ * ICS: ICache Snooping -- 0 = disable, 1 = enable snooping of icache
+ * NF: No Fault -- 0 = faults generate traps, 1 = faults don't trap
+ * ME: MMU enable -- 0 = mmu not translating, 1 = mmu translating
+ *
+ */
+
+#define TURBOSPARC_MMUENABLE    0x00000001
+#define TURBOSPARC_NOFAULT      0x00000002
+#define TURBOSPARC_ICSNOOP	0x00000004
+#define TURBOSPARC_PSO          0x00000080
+#define TURBOSPARC_DCENABLE     0x00000100   /* Enable data cache */
+#define TURBOSPARC_ICENABLE     0x00000200   /* Enable instruction cache */
+#define TURBOSPARC_BMODE        0x00004000   
+#define TURBOSPARC_PARITYODD	0x00020000   /* Parity odd, if enabled */
+#define TURBOSPARC_PCENABLE	0x00040000   /* Enable parity checking */
+
+/* Bits in the CPU configuration register for TurboSparc modules.
+ *
+ * -------------------------------------------------------
+ * |IOClk|SNP|AXClk| RAH |  WS |  RSV  |SBC|WT|uS2|SE|SCC|
+ * -------------------------------------------------------
+ *    31   30 29-28 27-26 25-23   22-8  7-6  5  4   3 2-0
+ *
+ */
+
+#define TURBOSPARC_SCENABLE 0x00000008	 /* Secondary cache enable */
+#define TURBOSPARC_uS2	    0x00000010   /* Swift compatibility mode */
+#define TURBOSPARC_WTENABLE 0x00000020	 /* Write thru for dcache */
+#define TURBOSPARC_SNENABLE 0x40000000	 /* DVMA snoop enable */
+
+#ifndef __ASSEMBLY__
+
+/* Bits [13:5] select one of 512 instruction cache tags */
+static inline void turbosparc_inv_insn_tag(unsigned long addr)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (addr), "i" (ASI_M_TXTC_TAG)
+			     : "memory");
+}
+
+/* Bits [13:5] select one of 512 data cache tags */
+static inline void turbosparc_inv_data_tag(unsigned long addr)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (addr), "i" (ASI_M_DATAC_TAG)
+			     : "memory");
+}
+
+static inline void turbosparc_flush_icache(void)
+{
+	unsigned long addr;
+
+        for (addr = 0; addr < 0x4000; addr += 0x20)
+                turbosparc_inv_insn_tag(addr);
+}
+
+static inline void turbosparc_flush_dcache(void)
+{
+	unsigned long addr;
+
+        for (addr = 0; addr < 0x4000; addr += 0x20)
+                turbosparc_inv_data_tag(addr);
+}
+
+static inline void turbosparc_idflash_clear(void)
+{
+	unsigned long addr;
+
+        for (addr = 0; addr < 0x4000; addr += 0x20) {
+                turbosparc_inv_insn_tag(addr);
+                turbosparc_inv_data_tag(addr);
+	}
+}
+
+static inline void turbosparc_set_ccreg(unsigned long regval)
+{
+	__asm__ __volatile__("sta %0, [%1] %2\n\t"
+			     : /* no outputs */
+			     : "r" (regval), "r" (0x600), "i" (ASI_M_MMUREGS)
+			     : "memory");
+}
+
+static inline unsigned long turbosparc_get_ccreg(void)
+{
+	unsigned long regval;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t"
+			     : "=r" (regval)
+			     : "r" (0x600), "i" (ASI_M_MMUREGS));
+	return regval;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_TURBOSPARC_H) */
diff --git a/arch/sparc/include/asm/types.h b/arch/sparc/include/asm/types.h
new file mode 100644
index 0000000..8c28fde
--- /dev/null
+++ b/arch/sparc/include/asm/types.h
@@ -0,0 +1,62 @@
+#ifndef _SPARC_TYPES_H
+#define _SPARC_TYPES_H
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+
+#if defined(__sparc__) && defined(__arch64__)
+
+/*** SPARC 64 bit ***/
+#include <asm-generic/int-l64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 64
+
+#ifndef __ASSEMBLY__
+
+/* Dma addresses come in generic and 64-bit flavours.  */
+
+typedef u32 dma_addr_t;
+typedef u64 dma64_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#else
+
+/*** SPARC 32 bit ***/
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+typedef u32 dma_addr_t;
+typedef u32 dma64_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* defined(__sparc__) && defined(__arch64__) */
+
+#endif /* defined(_SPARC_TYPES_H) */
diff --git a/arch/sparc/include/asm/uaccess.h b/arch/sparc/include/asm/uaccess.h
new file mode 100644
index 0000000..e88fbe5
--- /dev/null
+++ b/arch/sparc/include/asm/uaccess.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_UACCESS_H
+#define ___ASM_SPARC_UACCESS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/uaccess_64.h>
+#else
+#include <asm/uaccess_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/uaccess_32.h b/arch/sparc/include/asm/uaccess_32.h
new file mode 100644
index 0000000..47d5619
--- /dev/null
+++ b/arch/sparc/include/asm/uaccess_32.h
@@ -0,0 +1,336 @@
+/*
+ * uaccess.h: User space memore access functions.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+#ifdef __KERNEL__
+#include <linux/compiler.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <asm/vac-ops.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+/* Sparc is not segmented, however we need to be able to fool access_ok()
+ * when doing system calls from kernel mode legitimately.
+ *
+ * "For historical reasons, these macros are grossly misnamed." -Linus
+ */
+
+#define KERNEL_DS   ((mm_segment_t) { 0 })
+#define USER_DS     ((mm_segment_t) { -1 })
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current->thread.current_ds)
+#define set_fs(val)	((current->thread.current_ds) = (val))
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+/* We have there a nice not-mapped page at PAGE_OFFSET - PAGE_SIZE, so that this test
+ * can be fairly lightweight.
+ * No one can read/write anything from userland in the kernel space by setting
+ * large size and address near to PAGE_OFFSET - a fault will break his intentions.
+ */
+#define __user_ok(addr, size) ({ (void)(size); (addr) < STACK_TOP; })
+#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS))
+#define __access_ok(addr,size) (__user_ok((addr) & get_fs().seg,(size)))
+#define access_ok(type, addr, size)					\
+	({ (void)(type); __access_ok((unsigned long)(addr), size); })
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ *
+ * There is a special way how to put a range of potentially faulting
+ * insns (like twenty ldd/std's with now intervening other instructions)
+ * You specify address of first in insn and 0 in fixup and in the next
+ * exception_table_entry you specify last potentially faulting insn + 1
+ * and in fixup the routine which should handle the fault.
+ * That fixup code will get
+ * (faulting_insn_address - first_insn_in_the_range_address)/4
+ * in %g2 (ie. index of the faulting instruction in the range).
+ */
+
+struct exception_table_entry
+{
+        unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_extables_range(unsigned long addr, unsigned long *g2);
+
+extern void __ret_efault(void);
+
+/* Uh, these should become the main single-value transfer routines..
+ * They automatically use the right size if we just have the right
+ * pointer type..
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ */
+#define put_user(x,ptr) ({ \
+unsigned long __pu_addr = (unsigned long)(ptr); \
+__chk_user_ptr(ptr); \
+__put_user_check((__typeof__(*(ptr)))(x),__pu_addr,sizeof(*(ptr))); })
+
+#define get_user(x,ptr) ({ \
+unsigned long __gu_addr = (unsigned long)(ptr); \
+__chk_user_ptr(ptr); \
+__get_user_check((x),__gu_addr,sizeof(*(ptr)),__typeof__(*(ptr))); })
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the user has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x,ptr) __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr)),__typeof__(*(ptr)))
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) ((struct __large_struct __user *)(x))
+
+#define __put_user_check(x,addr,size) ({ \
+register int __pu_ret; \
+if (__access_ok(addr,size)) { \
+switch (size) { \
+case 1: __put_user_asm(x,b,addr,__pu_ret); break; \
+case 2: __put_user_asm(x,h,addr,__pu_ret); break; \
+case 4: __put_user_asm(x,,addr,__pu_ret); break; \
+case 8: __put_user_asm(x,d,addr,__pu_ret); break; \
+default: __pu_ret = __put_user_bad(); break; \
+} } else { __pu_ret = -EFAULT; } __pu_ret; })
+
+#define __put_user_nocheck(x,addr,size) ({ \
+register int __pu_ret; \
+switch (size) { \
+case 1: __put_user_asm(x,b,addr,__pu_ret); break; \
+case 2: __put_user_asm(x,h,addr,__pu_ret); break; \
+case 4: __put_user_asm(x,,addr,__pu_ret); break; \
+case 8: __put_user_asm(x,d,addr,__pu_ret); break; \
+default: __pu_ret = __put_user_bad(); break; \
+} __pu_ret; })
+
+#define __put_user_asm(x,size,addr,ret)					\
+__asm__ __volatile__(							\
+	"/* Put user asm, inline. */\n"					\
+"1:\t"	"st"#size " %1, %2\n\t"						\
+	"clr	%0\n"							\
+"2:\n\n\t"								\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"b	2b\n\t"							\
+	" mov	%3, %0\n\t"						\
+        ".previous\n\n\t"						\
+	".section __ex_table,#alloc\n\t"				\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\t"						\
+	".previous\n\n\t"						\
+       : "=&r" (ret) : "r" (x), "m" (*__m(addr)),			\
+	 "i" (-EFAULT))
+
+extern int __put_user_bad(void);
+
+#define __get_user_check(x,addr,size,type) ({ \
+register int __gu_ret; \
+register unsigned long __gu_val; \
+if (__access_ok(addr,size)) { \
+switch (size) { \
+case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \
+case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \
+case 4: __get_user_asm(__gu_val,,addr,__gu_ret); break; \
+case 8: __get_user_asm(__gu_val,d,addr,__gu_ret); break; \
+default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \
+} } else { __gu_val = 0; __gu_ret = -EFAULT; } x = (type) __gu_val; __gu_ret; })
+
+#define __get_user_check_ret(x,addr,size,type,retval) ({ \
+register unsigned long __gu_val __asm__ ("l1"); \
+if (__access_ok(addr,size)) { \
+switch (size) { \
+case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \
+case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \
+case 4: __get_user_asm_ret(__gu_val,,addr,retval); break; \
+case 8: __get_user_asm_ret(__gu_val,d,addr,retval); break; \
+default: if (__get_user_bad()) return retval; \
+} x = (type) __gu_val; } else return retval; })
+
+#define __get_user_nocheck(x,addr,size,type) ({ \
+register int __gu_ret; \
+register unsigned long __gu_val; \
+switch (size) { \
+case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \
+case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \
+case 4: __get_user_asm(__gu_val,,addr,__gu_ret); break; \
+case 8: __get_user_asm(__gu_val,d,addr,__gu_ret); break; \
+default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \
+} x = (type) __gu_val; __gu_ret; })
+
+#define __get_user_nocheck_ret(x,addr,size,type,retval) ({ \
+register unsigned long __gu_val __asm__ ("l1"); \
+switch (size) { \
+case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \
+case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \
+case 4: __get_user_asm_ret(__gu_val,,addr,retval); break; \
+case 8: __get_user_asm_ret(__gu_val,d,addr,retval); break; \
+default: if (__get_user_bad()) return retval; \
+} x = (type) __gu_val; })
+
+#define __get_user_asm(x,size,addr,ret)					\
+__asm__ __volatile__(							\
+	"/* Get user asm, inline. */\n"					\
+"1:\t"	"ld"#size " %2, %1\n\t"						\
+	"clr	%0\n"							\
+"2:\n\n\t"								\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"clr	%1\n\t"							\
+	"b	2b\n\t"							\
+	" mov	%3, %0\n\n\t"						\
+	".previous\n\t"							\
+	".section __ex_table,#alloc\n\t"				\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\n\t"						\
+	".previous\n\t"							\
+       : "=&r" (ret), "=&r" (x) : "m" (*__m(addr)),			\
+	 "i" (-EFAULT))
+
+#define __get_user_asm_ret(x,size,addr,retval)				\
+if (__builtin_constant_p(retval) && retval == -EFAULT)			\
+__asm__ __volatile__(							\
+	"/* Get user asm ret, inline. */\n"				\
+"1:\t"	"ld"#size " %1, %0\n\n\t"					\
+	".section __ex_table,#alloc\n\t"				\
+	".align	4\n\t"							\
+	".word	1b,__ret_efault\n\n\t"					\
+	".previous\n\t"							\
+       : "=&r" (x) : "m" (*__m(addr)));					\
+else									\
+__asm__ __volatile__(							\
+	"/* Get user asm ret, inline. */\n"				\
+"1:\t"	"ld"#size " %1, %0\n\n\t"					\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"ret\n\t"							\
+	" restore %%g0, %2, %%o0\n\n\t"					\
+	".previous\n\t"							\
+	".section __ex_table,#alloc\n\t"				\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\n\t"						\
+	".previous\n\t"							\
+       : "=&r" (x) : "m" (*__m(addr)), "i" (retval))
+
+extern int __get_user_bad(void);
+
+extern unsigned long __copy_user(void __user *to, const void __user *from, unsigned long size);
+
+static inline unsigned long copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	if (n && __access_ok((unsigned long) to, n))
+		return __copy_user(to, (__force void __user *) from, n);
+	else
+		return n;
+}
+
+static inline unsigned long __copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	return __copy_user(to, (__force void __user *) from, n);
+}
+
+static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	if (n && __access_ok((unsigned long) from, n))
+		return __copy_user((__force void __user *) to, from, n);
+	else
+		return n;
+}
+
+static inline unsigned long __copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	return __copy_user((__force void __user *) to, from, n);
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+static inline unsigned long __clear_user(void __user *addr, unsigned long size)
+{
+	unsigned long ret;
+
+	__asm__ __volatile__ (
+		".section __ex_table,#alloc\n\t"
+		".align 4\n\t"
+		".word 1f,3\n\t"
+		".previous\n\t"
+		"mov %2, %%o1\n"
+		"1:\n\t"
+		"call __bzero\n\t"
+		" mov %1, %%o0\n\t"
+		"mov %%o0, %0\n"
+		: "=r" (ret) : "r" (addr), "r" (size) :
+		"o0", "o1", "o2", "o3", "o4", "o5", "o7",
+		"g1", "g2", "g3", "g4", "g5", "g7", "cc");
+
+	return ret;
+}
+
+static inline unsigned long clear_user(void __user *addr, unsigned long n)
+{
+	if (n && __access_ok((unsigned long) addr, n))
+		return __clear_user(addr, n);
+	else
+		return n;
+}
+
+extern long __strncpy_from_user(char *dest, const char __user *src, long count);
+
+static inline long strncpy_from_user(char *dest, const char __user *src, long count)
+{
+	if (__access_ok((unsigned long) src, count))
+		return __strncpy_from_user(dest, src, count);
+	else
+		return -EFAULT;
+}
+
+extern long __strlen_user(const char __user *);
+extern long __strnlen_user(const char __user *, long len);
+
+static inline long strlen_user(const char __user *str)
+{
+	if (!access_ok(VERIFY_READ, str, 0))
+		return 0;
+	else
+		return __strlen_user(str);
+}
+
+static inline long strnlen_user(const char __user *str, long len)
+{
+	if (!access_ok(VERIFY_READ, str, 0))
+		return 0;
+	else
+		return __strnlen_user(str, len);
+}
+
+#endif  /* __ASSEMBLY__ */
+
+#endif /* _ASM_UACCESS_H */
diff --git a/arch/sparc/include/asm/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h
new file mode 100644
index 0000000..296ef30
--- /dev/null
+++ b/arch/sparc/include/asm/uaccess_64.h
@@ -0,0 +1,273 @@
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+
+#ifdef __KERNEL__
+#include <linux/compiler.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <asm/asi.h>
+#include <asm/system.h>
+#include <asm/spitfire.h>
+#include <asm-generic/uaccess.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Sparc64 is segmented, though more like the M68K than the I386.
+ * We use the secondary ASI to address user memory, which references a
+ * completely different VM map, thus there is zero chance of the user
+ * doing something queer and tricking us into poking kernel memory.
+ *
+ * What is left here is basically what is needed for the other parts of
+ * the kernel that expect to be able to manipulate, erum, "segments".
+ * Or perhaps more properly, permissions.
+ *
+ * "For historical reasons, these macros are grossly misnamed." -Linus
+ */
+
+#define KERNEL_DS   ((mm_segment_t) { ASI_P })
+#define USER_DS     ((mm_segment_t) { ASI_AIUS })	/* har har har */
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+#define get_fs() ((mm_segment_t) { get_thread_current_ds() })
+#define get_ds() (KERNEL_DS)
+
+#define segment_eq(a,b)  ((a).seg == (b).seg)
+
+#define set_fs(val)								\
+do {										\
+	set_thread_current_ds((val).seg);					\
+	__asm__ __volatile__ ("wr %%g0, %0, %%asi" : : "r" ((val).seg));	\
+} while(0)
+
+static inline int __access_ok(const void __user * addr, unsigned long size)
+{
+	return 1;
+}
+
+static inline int access_ok(int type, const void __user * addr, unsigned long size)
+{
+	return 1;
+}
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+        unsigned int insn, fixup;
+};
+
+extern void __ret_efault(void);
+extern void __retl_efault(void);
+
+/* Uh, these should become the main single-value transfer routines..
+ * They automatically use the right size if we just have the right
+ * pointer type..
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ */
+#define put_user(x,ptr) ({ \
+unsigned long __pu_addr = (unsigned long)(ptr); \
+__chk_user_ptr(ptr); \
+__put_user_nocheck((__typeof__(*(ptr)))(x),__pu_addr,sizeof(*(ptr))); })
+
+#define get_user(x,ptr) ({ \
+unsigned long __gu_addr = (unsigned long)(ptr); \
+__chk_user_ptr(ptr); \
+__get_user_nocheck((x),__gu_addr,sizeof(*(ptr)),__typeof__(*(ptr))); })
+
+#define __put_user(x,ptr) put_user(x,ptr)
+#define __get_user(x,ptr) get_user(x,ptr)
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) ((struct __large_struct *)(x))
+
+#define __put_user_nocheck(data,addr,size) ({ \
+register int __pu_ret; \
+switch (size) { \
+case 1: __put_user_asm(data,b,addr,__pu_ret); break; \
+case 2: __put_user_asm(data,h,addr,__pu_ret); break; \
+case 4: __put_user_asm(data,w,addr,__pu_ret); break; \
+case 8: __put_user_asm(data,x,addr,__pu_ret); break; \
+default: __pu_ret = __put_user_bad(); break; \
+} __pu_ret; })
+
+#define __put_user_asm(x,size,addr,ret)					\
+__asm__ __volatile__(							\
+	"/* Put user asm, inline. */\n"					\
+"1:\t"	"st"#size "a %1, [%2] %%asi\n\t"				\
+	"clr	%0\n"							\
+"2:\n\n\t"								\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"sethi	%%hi(2b), %0\n\t"					\
+	"jmpl	%0 + %%lo(2b), %%g0\n\t"				\
+	" mov	%3, %0\n\n\t"						\
+	".previous\n\t"							\
+	".section __ex_table,\"a\"\n\t"					\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\t"						\
+	".previous\n\n\t"						\
+       : "=r" (ret) : "r" (x), "r" (__m(addr)),				\
+	 "i" (-EFAULT))
+
+extern int __put_user_bad(void);
+
+#define __get_user_nocheck(data,addr,size,type) ({ \
+register int __gu_ret; \
+register unsigned long __gu_val; \
+switch (size) { \
+case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \
+case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \
+case 4: __get_user_asm(__gu_val,uw,addr,__gu_ret); break; \
+case 8: __get_user_asm(__gu_val,x,addr,__gu_ret); break; \
+default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \
+} data = (type) __gu_val; __gu_ret; })
+
+#define __get_user_nocheck_ret(data,addr,size,type,retval) ({ \
+register unsigned long __gu_val __asm__ ("l1"); \
+switch (size) { \
+case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \
+case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \
+case 4: __get_user_asm_ret(__gu_val,uw,addr,retval); break; \
+case 8: __get_user_asm_ret(__gu_val,x,addr,retval); break; \
+default: if (__get_user_bad()) return retval; \
+} data = (type) __gu_val; })
+
+#define __get_user_asm(x,size,addr,ret)					\
+__asm__ __volatile__(							\
+	"/* Get user asm, inline. */\n"					\
+"1:\t"	"ld"#size "a [%2] %%asi, %1\n\t"				\
+	"clr	%0\n"							\
+"2:\n\n\t"								\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"sethi	%%hi(2b), %0\n\t"					\
+	"clr	%1\n\t"							\
+	"jmpl	%0 + %%lo(2b), %%g0\n\t"				\
+	" mov	%3, %0\n\n\t"						\
+	".previous\n\t"							\
+	".section __ex_table,\"a\"\n\t"					\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\n\t"						\
+	".previous\n\t"							\
+       : "=r" (ret), "=r" (x) : "r" (__m(addr)),			\
+	 "i" (-EFAULT))
+
+#define __get_user_asm_ret(x,size,addr,retval)				\
+if (__builtin_constant_p(retval) && retval == -EFAULT)			\
+__asm__ __volatile__(							\
+	"/* Get user asm ret, inline. */\n"				\
+"1:\t"	"ld"#size "a [%1] %%asi, %0\n\n\t"				\
+	".section __ex_table,\"a\"\n\t"					\
+	".align	4\n\t"							\
+	".word	1b,__ret_efault\n\n\t"					\
+	".previous\n\t"							\
+       : "=r" (x) : "r" (__m(addr)));					\
+else									\
+__asm__ __volatile__(							\
+	"/* Get user asm ret, inline. */\n"				\
+"1:\t"	"ld"#size "a [%1] %%asi, %0\n\n\t"				\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"ret\n\t"							\
+	" restore %%g0, %2, %%o0\n\n\t"					\
+	".previous\n\t"							\
+	".section __ex_table,\"a\"\n\t"					\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\n\t"						\
+	".previous\n\t"							\
+       : "=r" (x) : "r" (__m(addr)), "i" (retval))
+
+extern int __get_user_bad(void);
+
+extern unsigned long __must_check ___copy_from_user(void *to,
+						    const void __user *from,
+						    unsigned long size);
+extern unsigned long copy_from_user_fixup(void *to, const void __user *from,
+					  unsigned long size);
+static inline unsigned long __must_check
+copy_from_user(void *to, const void __user *from, unsigned long size)
+{
+	unsigned long ret = ___copy_from_user(to, from, size);
+
+	if (unlikely(ret))
+		ret = copy_from_user_fixup(to, from, size);
+	return ret;
+}
+#define __copy_from_user copy_from_user
+
+extern unsigned long __must_check ___copy_to_user(void __user *to,
+						  const void *from,
+						  unsigned long size);
+extern unsigned long copy_to_user_fixup(void __user *to, const void *from,
+					unsigned long size);
+static inline unsigned long __must_check
+copy_to_user(void __user *to, const void *from, unsigned long size)
+{
+	unsigned long ret = ___copy_to_user(to, from, size);
+
+	if (unlikely(ret))
+		ret = copy_to_user_fixup(to, from, size);
+	return ret;
+}
+#define __copy_to_user copy_to_user
+
+extern unsigned long __must_check ___copy_in_user(void __user *to,
+						  const void __user *from,
+						  unsigned long size);
+extern unsigned long copy_in_user_fixup(void __user *to, void __user *from,
+					unsigned long size);
+static inline unsigned long __must_check
+copy_in_user(void __user *to, void __user *from, unsigned long size)
+{
+	unsigned long ret = ___copy_in_user(to, from, size);
+
+	if (unlikely(ret))
+		ret = copy_in_user_fixup(to, from, size);
+	return ret;
+}
+#define __copy_in_user copy_in_user
+
+extern unsigned long __must_check __clear_user(void __user *, unsigned long);
+
+#define clear_user __clear_user
+
+extern long __must_check __strncpy_from_user(char *dest, const char __user *src, long count);
+
+#define strncpy_from_user __strncpy_from_user
+
+extern long __strlen_user(const char __user *);
+extern long __strnlen_user(const char __user *, long len);
+
+#define strlen_user __strlen_user
+#define strnlen_user __strnlen_user
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+#endif  /* __ASSEMBLY__ */
+
+#endif /* _ASM_UACCESS_H */
diff --git a/arch/sparc/include/asm/uctx.h b/arch/sparc/include/asm/uctx.h
new file mode 100644
index 0000000..dc937c7
--- /dev/null
+++ b/arch/sparc/include/asm/uctx.h
@@ -0,0 +1,71 @@
+/*
+ * uctx.h: Sparc64 {set,get}context() register state layouts.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC64_UCTX_H
+#define __SPARC64_UCTX_H
+
+#define MC_TSTATE	0
+#define MC_PC		1
+#define MC_NPC		2
+#define MC_Y		3
+#define MC_G1		4
+#define MC_G2		5
+#define MC_G3		6
+#define MC_G4		7
+#define MC_G5		8
+#define MC_G6		9
+#define MC_G7		10
+#define MC_O0		11
+#define MC_O1		12
+#define MC_O2		13
+#define MC_O3		14
+#define MC_O4		15
+#define MC_O5		16
+#define MC_O6		17
+#define MC_O7		18
+#define MC_NGREG	19
+
+typedef unsigned long mc_greg_t;
+typedef mc_greg_t mc_gregset_t[MC_NGREG];
+
+#define MC_MAXFPQ	16
+struct mc_fq {
+	unsigned long	*mcfq_addr;
+	unsigned int	mcfq_insn;
+};
+
+struct mc_fpu {
+	union {
+		unsigned int	sregs[32];
+		unsigned long	dregs[32];
+		long double	qregs[16];
+	} mcfpu_fregs;
+	unsigned long	mcfpu_fsr;
+	unsigned long	mcfpu_fprs;
+	unsigned long	mcfpu_gsr;
+	struct mc_fq	*mcfpu_fq;
+	unsigned char	mcfpu_qcnt;
+	unsigned char	mcfpu_qentsz;
+	unsigned char	mcfpu_enab;
+};
+typedef struct mc_fpu mc_fpu_t;
+
+typedef struct {
+	mc_gregset_t	mc_gregs;
+	mc_greg_t	mc_fp;
+	mc_greg_t	mc_i7;
+	mc_fpu_t	mc_fpregs;
+} mcontext_t;
+
+struct ucontext {
+	struct ucontext		*uc_link;
+	unsigned long		uc_flags;
+	sigset_t		uc_sigmask;
+	mcontext_t		uc_mcontext;
+};
+typedef struct ucontext ucontext_t;
+
+#endif /* __SPARC64_UCTX_H */
diff --git a/arch/sparc/include/asm/unaligned.h b/arch/sparc/include/asm/unaligned.h
new file mode 100644
index 0000000..11d2d5f
--- /dev/null
+++ b/arch/sparc/include/asm/unaligned.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_SPARC_UNALIGNED_H
+#define _ASM_SPARC_UNALIGNED_H
+
+#include <linux/unaligned/be_struct.h>
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/generic.h>
+#define get_unaligned	__get_unaligned_be
+#define put_unaligned	__put_unaligned_be
+
+#endif /* _ASM_SPARC_UNALIGNED_H */
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
new file mode 100644
index 0000000..4207fb36
--- /dev/null
+++ b/arch/sparc/include/asm/unistd.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_UNISTD_H
+#define ___ASM_SPARC_UNISTD_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/unistd_64.h>
+#else
+#include <asm/unistd_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/unistd_32.h b/arch/sparc/include/asm/unistd_32.h
new file mode 100644
index 0000000..648643a
--- /dev/null
+++ b/arch/sparc/include/asm/unistd_32.h
@@ -0,0 +1,384 @@
+#ifndef _SPARC_UNISTD_H
+#define _SPARC_UNISTD_H
+
+/*
+ * System calls under the Sparc.
+ *
+ * Don't be scared by the ugly clobbers, it is the only way I can
+ * think of right now to force the arguments into fixed registers
+ * before the trap into the system call with gcc 'asm' statements.
+ *
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
+ *
+ * SunOS compatibility based upon preliminary work which is:
+ *
+ * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu)
+ */
+
+#define __NR_restart_syscall      0 /* Linux Specific				   */
+#define __NR_exit                 1 /* Common                                      */
+#define __NR_fork                 2 /* Common                                      */
+#define __NR_read                 3 /* Common                                      */
+#define __NR_write                4 /* Common                                      */
+#define __NR_open                 5 /* Common                                      */
+#define __NR_close                6 /* Common                                      */
+#define __NR_wait4                7 /* Common                                      */
+#define __NR_creat                8 /* Common                                      */
+#define __NR_link                 9 /* Common                                      */
+#define __NR_unlink              10 /* Common                                      */
+#define __NR_execv               11 /* SunOS Specific                              */
+#define __NR_chdir               12 /* Common                                      */
+#define __NR_chown		 13 /* Common					   */
+#define __NR_mknod               14 /* Common                                      */
+#define __NR_chmod               15 /* Common                                      */
+#define __NR_lchown              16 /* Common                                      */
+#define __NR_brk                 17 /* Common                                      */
+#define __NR_perfctr             18 /* Performance counter operations              */
+#define __NR_lseek               19 /* Common                                      */
+#define __NR_getpid              20 /* Common                                      */
+#define __NR_capget		 21 /* Linux Specific				   */
+#define __NR_capset		 22 /* Linux Specific				   */
+#define __NR_setuid              23 /* Implemented via setreuid in SunOS           */
+#define __NR_getuid              24 /* Common                                      */
+#define __NR_vmsplice	         25 /* ENOSYS under SunOS			   */
+#define __NR_ptrace              26 /* Common                                      */
+#define __NR_alarm               27 /* Implemented via setitimer in SunOS          */
+#define __NR_sigaltstack	 28 /* Common					   */
+#define __NR_pause               29 /* Is sigblock(0)->sigpause() in SunOS         */
+#define __NR_utime               30 /* Implemented via utimes() under SunOS        */
+#define __NR_lchown32            31 /* Linux sparc32 specific                      */
+#define __NR_fchown32            32 /* Linux sparc32 specific                      */
+#define __NR_access              33 /* Common                                      */
+#define __NR_nice                34 /* Implemented via get/setpriority() in SunOS  */
+#define __NR_chown32             35 /* Linux sparc32 specific                      */
+#define __NR_sync                36 /* Common                                      */
+#define __NR_kill                37 /* Common                                      */
+#define __NR_stat                38 /* Common                                      */
+#define __NR_sendfile		 39 /* Linux Specific				   */
+#define __NR_lstat               40 /* Common                                      */
+#define __NR_dup                 41 /* Common                                      */
+#define __NR_pipe                42 /* Common                                      */
+#define __NR_times               43 /* Implemented via getrusage() in SunOS        */
+#define __NR_getuid32            44 /* Linux sparc32 specific                      */
+#define __NR_umount2             45 /* Linux Specific                              */
+#define __NR_setgid              46 /* Implemented via setregid() in SunOS         */
+#define __NR_getgid              47 /* Common                                      */
+#define __NR_signal              48 /* Implemented via sigvec() in SunOS           */
+#define __NR_geteuid             49 /* SunOS calls getuid()                        */
+#define __NR_getegid             50 /* SunOS calls getgid()                        */
+#define __NR_acct                51 /* Common                                      */
+/* #define __NR_memory_ordering  52    Linux sparc64 specific			   */
+#define __NR_getgid32            53 /* Linux sparc32 specific                      */
+#define __NR_ioctl               54 /* Common                                      */
+#define __NR_reboot              55 /* Common                                      */
+#define __NR_mmap2		 56 /* Linux sparc32 Specific			   */
+#define __NR_symlink             57 /* Common                                      */
+#define __NR_readlink            58 /* Common                                      */
+#define __NR_execve              59 /* Common                                      */
+#define __NR_umask               60 /* Common                                      */
+#define __NR_chroot              61 /* Common                                      */
+#define __NR_fstat               62 /* Common                                      */
+#define __NR_fstat64		 63 /* Linux Specific			           */
+#define __NR_getpagesize         64 /* Common                                      */
+#define __NR_msync               65 /* Common in newer 1.3.x revs...               */
+#define __NR_vfork               66 /* Common                                      */
+#define __NR_pread64             67 /* Linux Specific                              */
+#define __NR_pwrite64            68 /* Linux Specific                              */
+#define __NR_geteuid32           69 /* Linux sparc32, sbrk under SunOS             */
+#define __NR_getegid32           70 /* Linux sparc32, sstk under SunOS             */
+#define __NR_mmap                71 /* Common                                      */
+#define __NR_setreuid32          72 /* Linux sparc32, vadvise under SunOS          */
+#define __NR_munmap              73 /* Common                                      */
+#define __NR_mprotect            74 /* Common                                      */
+#define __NR_madvise             75 /* Common                                      */
+#define __NR_vhangup             76 /* Common                                      */
+#define __NR_truncate64		 77 /* Linux sparc32 Specific			   */
+#define __NR_mincore             78 /* Common                                      */
+#define __NR_getgroups           79 /* Common                                      */
+#define __NR_setgroups           80 /* Common                                      */
+#define __NR_getpgrp             81 /* Common                                      */
+#define __NR_setgroups32         82 /* Linux sparc32, setpgrp under SunOS          */
+#define __NR_setitimer           83 /* Common                                      */
+#define __NR_ftruncate64	 84 /* Linux sparc32 Specific			   */
+#define __NR_swapon              85 /* Common                                      */
+#define __NR_getitimer           86 /* Common                                      */
+#define __NR_setuid32            87 /* Linux sparc32, gethostname under SunOS      */
+#define __NR_sethostname         88 /* Common                                      */
+#define __NR_setgid32            89 /* Linux sparc32, getdtablesize under SunOS    */
+#define __NR_dup2                90 /* Common                                      */
+#define __NR_setfsuid32          91 /* Linux sparc32, getdopt under SunOS          */
+#define __NR_fcntl               92 /* Common                                      */
+#define __NR_select              93 /* Common                                      */
+#define __NR_setfsgid32          94 /* Linux sparc32, setdopt under SunOS          */
+#define __NR_fsync               95 /* Common                                      */
+#define __NR_setpriority         96 /* Common                                      */
+#define __NR_socket              97 /* Common                                      */
+#define __NR_connect             98 /* Common                                      */
+#define __NR_accept              99 /* Common                                      */
+#define __NR_getpriority        100 /* Common                                      */
+#define __NR_rt_sigreturn       101 /* Linux Specific                              */
+#define __NR_rt_sigaction       102 /* Linux Specific                              */
+#define __NR_rt_sigprocmask     103 /* Linux Specific                              */
+#define __NR_rt_sigpending      104 /* Linux Specific                              */
+#define __NR_rt_sigtimedwait    105 /* Linux Specific                              */
+#define __NR_rt_sigqueueinfo    106 /* Linux Specific                              */
+#define __NR_rt_sigsuspend      107 /* Linux Specific                              */
+#define __NR_setresuid32        108 /* Linux Specific, sigvec under SunOS	   */
+#define __NR_getresuid32        109 /* Linux Specific, sigblock under SunOS	   */
+#define __NR_setresgid32        110 /* Linux Specific, sigsetmask under SunOS	   */
+#define __NR_getresgid32        111 /* Linux Specific, sigpause under SunOS	   */
+#define __NR_setregid32         112 /* Linux sparc32, sigstack under SunOS         */
+#define __NR_recvmsg            113 /* Common                                      */
+#define __NR_sendmsg            114 /* Common                                      */
+#define __NR_getgroups32        115 /* Linux sparc32, vtrace under SunOS           */
+#define __NR_gettimeofday       116 /* Common                                      */
+#define __NR_getrusage          117 /* Common                                      */
+#define __NR_getsockopt         118 /* Common                                      */
+#define __NR_getcwd		119 /* Linux Specific				   */
+#define __NR_readv              120 /* Common                                      */
+#define __NR_writev             121 /* Common                                      */
+#define __NR_settimeofday       122 /* Common                                      */
+#define __NR_fchown             123 /* Common                                      */
+#define __NR_fchmod             124 /* Common                                      */
+#define __NR_recvfrom           125 /* Common                                      */
+#define __NR_setreuid           126 /* Common                                      */
+#define __NR_setregid           127 /* Common                                      */
+#define __NR_rename             128 /* Common                                      */
+#define __NR_truncate           129 /* Common                                      */
+#define __NR_ftruncate          130 /* Common                                      */
+#define __NR_flock              131 /* Common                                      */
+#define __NR_lstat64		132 /* Linux Specific			           */
+#define __NR_sendto             133 /* Common                                      */
+#define __NR_shutdown           134 /* Common                                      */
+#define __NR_socketpair         135 /* Common                                      */
+#define __NR_mkdir              136 /* Common                                      */
+#define __NR_rmdir              137 /* Common                                      */
+#define __NR_utimes             138 /* SunOS Specific                              */
+#define __NR_stat64		139 /* Linux Specific			           */
+#define __NR_sendfile64         140 /* adjtime under SunOS                         */
+#define __NR_getpeername        141 /* Common                                      */
+#define __NR_futex              142 /* gethostid under SunOS                       */
+#define __NR_gettid             143 /* ENOSYS under SunOS                          */
+#define __NR_getrlimit          144 /* Common                                      */
+#define __NR_setrlimit          145 /* Common                                      */
+#define __NR_pivot_root		146 /* Linux Specific, killpg under SunOS          */
+#define __NR_prctl		147 /* ENOSYS under SunOS                          */
+#define __NR_pciconfig_read	148 /* ENOSYS under SunOS                          */
+#define __NR_pciconfig_write	149 /* ENOSYS under SunOS                          */
+#define __NR_getsockname        150 /* Common                                      */
+#define __NR_inotify_init       151 /* Linux specific                              */
+#define __NR_inotify_add_watch  152 /* Linux specific                              */
+#define __NR_poll               153 /* Common                                      */
+#define __NR_getdents64		154 /* Linux specific				   */
+#define __NR_fcntl64		155 /* Linux sparc32 Specific                      */
+#define __NR_inotify_rm_watch   156 /* Linux specific				   */
+#define __NR_statfs             157 /* Common                                      */
+#define __NR_fstatfs            158 /* Common                                      */
+#define __NR_umount             159 /* Common                                      */
+#define __NR_sched_set_affinity 160 /* Linux specific, async_daemon under SunOS    */
+#define __NR_sched_get_affinity 161 /* Linux specific, getfh under SunOS           */
+#define __NR_getdomainname      162 /* SunOS Specific                              */
+#define __NR_setdomainname      163 /* Common                                      */
+/* #define __NR_utrap_install   164    Linux sparc64 specific			   */
+#define __NR_quotactl           165 /* Common                                      */
+#define __NR_set_tid_address    166 /* Linux specific, exportfs under SunOS        */
+#define __NR_mount              167 /* Common                                      */
+#define __NR_ustat              168 /* Common                                      */
+#define __NR_setxattr           169 /* SunOS: semsys                               */
+#define __NR_lsetxattr          170 /* SunOS: msgsys                               */
+#define __NR_fsetxattr          171 /* SunOS: shmsys                               */
+#define __NR_getxattr           172 /* SunOS: auditsys                             */
+#define __NR_lgetxattr          173 /* SunOS: rfssys                               */
+#define __NR_getdents           174 /* Common                                      */
+#define __NR_setsid             175 /* Common                                      */
+#define __NR_fchdir             176 /* Common                                      */
+#define __NR_fgetxattr          177 /* SunOS: fchroot                              */
+#define __NR_listxattr          178 /* SunOS: vpixsys                              */
+#define __NR_llistxattr         179 /* SunOS: aioread                              */
+#define __NR_flistxattr         180 /* SunOS: aiowrite                             */
+#define __NR_removexattr        181 /* SunOS: aiowait                              */
+#define __NR_lremovexattr       182 /* SunOS: aiocancel                            */
+#define __NR_sigpending         183 /* Common                                      */
+#define __NR_query_module	184 /* Linux Specific				   */
+#define __NR_setpgid            185 /* Common                                      */
+#define __NR_fremovexattr       186 /* SunOS: pathconf                             */
+#define __NR_tkill              187 /* SunOS: fpathconf                            */
+#define __NR_exit_group		188 /* Linux specific, sysconf undef SunOS         */
+#define __NR_uname              189 /* Linux Specific                              */
+#define __NR_init_module        190 /* Linux Specific                              */
+#define __NR_personality        191 /* Linux Specific                              */
+#define __NR_remap_file_pages   192 /* Linux Specific                              */
+#define __NR_epoll_create       193 /* Linux Specific                              */
+#define __NR_epoll_ctl          194 /* Linux Specific                              */
+#define __NR_epoll_wait         195 /* Linux Specific                              */
+#define __NR_ioprio_set         196 /* Linux Specific                              */
+#define __NR_getppid            197 /* Linux Specific                              */
+#define __NR_sigaction          198 /* Linux Specific                              */
+#define __NR_sgetmask           199 /* Linux Specific                              */
+#define __NR_ssetmask           200 /* Linux Specific                              */
+#define __NR_sigsuspend         201 /* Linux Specific                              */
+#define __NR_oldlstat           202 /* Linux Specific                              */
+#define __NR_uselib             203 /* Linux Specific                              */
+#define __NR_readdir            204 /* Linux Specific                              */
+#define __NR_readahead          205 /* Linux Specific                              */
+#define __NR_socketcall         206 /* Linux Specific                              */
+#define __NR_syslog             207 /* Linux Specific                              */
+#define __NR_lookup_dcookie     208 /* Linux Specific                              */
+#define __NR_fadvise64          209 /* Linux Specific                              */
+#define __NR_fadvise64_64       210 /* Linux Specific                              */
+#define __NR_tgkill             211 /* Linux Specific                              */
+#define __NR_waitpid            212 /* Linux Specific                              */
+#define __NR_swapoff            213 /* Linux Specific                              */
+#define __NR_sysinfo            214 /* Linux Specific                              */
+#define __NR_ipc                215 /* Linux Specific                              */
+#define __NR_sigreturn          216 /* Linux Specific                              */
+#define __NR_clone              217 /* Linux Specific                              */
+#define __NR_ioprio_get         218 /* Linux Specific                              */
+#define __NR_adjtimex           219 /* Linux Specific                              */
+#define __NR_sigprocmask        220 /* Linux Specific                              */
+#define __NR_create_module      221 /* Linux Specific                              */
+#define __NR_delete_module      222 /* Linux Specific                              */
+#define __NR_get_kernel_syms    223 /* Linux Specific                              */
+#define __NR_getpgid            224 /* Linux Specific                              */
+#define __NR_bdflush            225 /* Linux Specific                              */
+#define __NR_sysfs              226 /* Linux Specific                              */
+#define __NR_afs_syscall        227 /* Linux Specific                              */
+#define __NR_setfsuid           228 /* Linux Specific                              */
+#define __NR_setfsgid           229 /* Linux Specific                              */
+#define __NR__newselect         230 /* Linux Specific                              */
+#define __NR_time               231 /* Linux Specific                              */
+#define __NR_splice             232 /* Linux Specific                              */
+#define __NR_stime              233 /* Linux Specific                              */
+#define __NR_statfs64           234 /* Linux Specific                              */
+#define __NR_fstatfs64          235 /* Linux Specific                              */
+#define __NR__llseek            236 /* Linux Specific                              */
+#define __NR_mlock              237
+#define __NR_munlock            238
+#define __NR_mlockall           239
+#define __NR_munlockall         240
+#define __NR_sched_setparam     241
+#define __NR_sched_getparam     242
+#define __NR_sched_setscheduler 243
+#define __NR_sched_getscheduler 244
+#define __NR_sched_yield        245
+#define __NR_sched_get_priority_max 246
+#define __NR_sched_get_priority_min 247
+#define __NR_sched_rr_get_interval  248
+#define __NR_nanosleep          249
+#define __NR_mremap             250
+#define __NR__sysctl            251
+#define __NR_getsid             252
+#define __NR_fdatasync          253
+#define __NR_nfsservctl         254
+#define __NR_sync_file_range	255
+#define __NR_clock_settime	256
+#define __NR_clock_gettime	257
+#define __NR_clock_getres	258
+#define __NR_clock_nanosleep	259
+#define __NR_sched_getaffinity	260
+#define __NR_sched_setaffinity	261
+#define __NR_timer_settime	262
+#define __NR_timer_gettime	263
+#define __NR_timer_getoverrun	264
+#define __NR_timer_delete	265
+#define __NR_timer_create	266
+/* #define __NR_vserver		267 Reserved for VSERVER */
+#define __NR_io_setup		268
+#define __NR_io_destroy		269
+#define __NR_io_submit		270
+#define __NR_io_cancel		271
+#define __NR_io_getevents	272
+#define __NR_mq_open		273
+#define __NR_mq_unlink		274
+#define __NR_mq_timedsend	275
+#define __NR_mq_timedreceive	276
+#define __NR_mq_notify		277
+#define __NR_mq_getsetattr	278
+#define __NR_waitid		279
+#define __NR_tee		280
+#define __NR_add_key		281
+#define __NR_request_key	282
+#define __NR_keyctl		283
+#define __NR_openat		284
+#define __NR_mkdirat		285
+#define __NR_mknodat		286
+#define __NR_fchownat		287
+#define __NR_futimesat		288
+#define __NR_fstatat64		289
+#define __NR_unlinkat		290
+#define __NR_renameat		291
+#define __NR_linkat		292
+#define __NR_symlinkat		293
+#define __NR_readlinkat		294
+#define __NR_fchmodat		295
+#define __NR_faccessat		296
+#define __NR_pselect6		297
+#define __NR_ppoll		298
+#define __NR_unshare		299
+#define __NR_set_robust_list	300
+#define __NR_get_robust_list	301
+#define __NR_migrate_pages	302
+#define __NR_mbind		303
+#define __NR_get_mempolicy	304
+#define __NR_set_mempolicy	305
+#define __NR_kexec_load		306
+#define __NR_move_pages		307
+#define __NR_getcpu		308
+#define __NR_epoll_pwait	309
+#define __NR_utimensat		310
+#define __NR_signalfd		311
+#define __NR_timerfd_create	312
+#define __NR_eventfd		313
+#define __NR_fallocate		314
+#define __NR_timerfd_settime	315
+#define __NR_timerfd_gettime	316
+#define __NR_signalfd4		317
+#define __NR_eventfd2		318
+#define __NR_epoll_create1	319
+#define __NR_dup3		320
+#define __NR_pipe2		321
+#define __NR_inotify_init1	322
+
+#define NR_SYSCALLS		323
+
+/* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
+ * it never had the plain ones and there is no value to adding those
+ * old versions into the syscall table.
+ */
+#define __IGNORE_setresuid
+#define __IGNORE_getresuid
+#define __IGNORE_setresgid
+#define __IGNORE_getresgid
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _SPARC_UNISTD_H */
diff --git a/arch/sparc/include/asm/unistd_64.h b/arch/sparc/include/asm/unistd_64.h
new file mode 100644
index 0000000..c5cc0e0
--- /dev/null
+++ b/arch/sparc/include/asm/unistd_64.h
@@ -0,0 +1,379 @@
+#ifndef _SPARC64_UNISTD_H
+#define _SPARC64_UNISTD_H
+
+/*
+ * System calls under the Sparc.
+ *
+ * Don't be scared by the ugly clobbers, it is the only way I can
+ * think of right now to force the arguments into fixed registers
+ * before the trap into the system call with gcc 'asm' statements.
+ *
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
+ *
+ * SunOS compatibility based upon preliminary work which is:
+ *
+ * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu)
+ */
+
+#define __NR_restart_syscall      0 /* Linux Specific				   */
+#define __NR_exit                 1 /* Common                                      */
+#define __NR_fork                 2 /* Common                                      */
+#define __NR_read                 3 /* Common                                      */
+#define __NR_write                4 /* Common                                      */
+#define __NR_open                 5 /* Common                                      */
+#define __NR_close                6 /* Common                                      */
+#define __NR_wait4                7 /* Common                                      */
+#define __NR_creat                8 /* Common                                      */
+#define __NR_link                 9 /* Common                                      */
+#define __NR_unlink              10 /* Common                                      */
+#define __NR_execv               11 /* SunOS Specific                              */
+#define __NR_chdir               12 /* Common                                      */
+#define __NR_chown		 13 /* Common					   */
+#define __NR_mknod               14 /* Common                                      */
+#define __NR_chmod               15 /* Common                                      */
+#define __NR_lchown              16 /* Common                                      */
+#define __NR_brk                 17 /* Common                                      */
+#define __NR_perfctr             18 /* Performance counter operations              */
+#define __NR_lseek               19 /* Common                                      */
+#define __NR_getpid              20 /* Common                                      */
+#define __NR_capget		 21 /* Linux Specific				   */
+#define __NR_capset		 22 /* Linux Specific				   */
+#define __NR_setuid              23 /* Implemented via setreuid in SunOS           */
+#define __NR_getuid              24 /* Common                                      */
+#define __NR_vmsplice	         25 /* ENOSYS under SunOS			   */
+#define __NR_ptrace              26 /* Common                                      */
+#define __NR_alarm               27 /* Implemented via setitimer in SunOS          */
+#define __NR_sigaltstack	 28 /* Common					   */
+#define __NR_pause               29 /* Is sigblock(0)->sigpause() in SunOS         */
+#define __NR_utime               30 /* Implemented via utimes() under SunOS        */
+/* #define __NR_lchown32         31    Linux sparc32 specific                      */
+/* #define __NR_fchown32         32    Linux sparc32 specific                      */
+#define __NR_access              33 /* Common                                      */
+#define __NR_nice                34 /* Implemented via get/setpriority() in SunOS  */
+/* #define __NR_chown32          35    Linux sparc32 specific                      */
+#define __NR_sync                36 /* Common                                      */
+#define __NR_kill                37 /* Common                                      */
+#define __NR_stat                38 /* Common                                      */
+#define __NR_sendfile		 39 /* Linux Specific				   */
+#define __NR_lstat               40 /* Common                                      */
+#define __NR_dup                 41 /* Common                                      */
+#define __NR_pipe                42 /* Common                                      */
+#define __NR_times               43 /* Implemented via getrusage() in SunOS        */
+/* #define __NR_getuid32         44    Linux sparc32 specific                      */
+#define __NR_umount2             45 /* Linux Specific                              */
+#define __NR_setgid              46 /* Implemented via setregid() in SunOS         */
+#define __NR_getgid              47 /* Common                                      */
+#define __NR_signal              48 /* Implemented via sigvec() in SunOS           */
+#define __NR_geteuid             49 /* SunOS calls getuid()                        */
+#define __NR_getegid             50 /* SunOS calls getgid()                        */
+#define __NR_acct                51 /* Common                                      */
+#define __NR_memory_ordering	 52 /* Linux Specific				   */
+/* #define __NR_getgid32         53    Linux sparc32 specific                      */
+#define __NR_ioctl               54 /* Common                                      */
+#define __NR_reboot              55 /* Common                                      */
+/* #define __NR_mmap2		 56    Linux sparc32 Specific                      */
+#define __NR_symlink             57 /* Common                                      */
+#define __NR_readlink            58 /* Common                                      */
+#define __NR_execve              59 /* Common                                      */
+#define __NR_umask               60 /* Common                                      */
+#define __NR_chroot              61 /* Common                                      */
+#define __NR_fstat               62 /* Common                                      */
+#define __NR_fstat64             63 /* Linux Specific                              */
+#define __NR_getpagesize         64 /* Common                                      */
+#define __NR_msync               65 /* Common in newer 1.3.x revs...               */
+#define __NR_vfork               66 /* Common                                      */
+#define __NR_pread64             67 /* Linux Specific                              */
+#define __NR_pwrite64            68 /* Linux Specific                              */
+/* #define __NR_geteuid32        69    Linux sparc32, sbrk under SunOS             */
+/* #define __NR_getegid32        70    Linux sparc32, sstk under SunOS             */
+#define __NR_mmap                71 /* Common                                      */
+/* #define __NR_setreuid32       72    Linux sparc32, vadvise under SunOS          */
+#define __NR_munmap              73 /* Common                                      */
+#define __NR_mprotect            74 /* Common                                      */
+#define __NR_madvise             75 /* Common                                      */
+#define __NR_vhangup             76 /* Common                                      */
+/* #define __NR_truncate64       77    Linux sparc32 Specific			   */
+#define __NR_mincore             78 /* Common                                      */
+#define __NR_getgroups           79 /* Common                                      */
+#define __NR_setgroups           80 /* Common                                      */
+#define __NR_getpgrp             81 /* Common                                      */
+/* #define __NR_setgroups32      82    Linux sparc32, setpgrp under SunOS          */
+#define __NR_setitimer           83 /* Common                                      */
+/* #define __NR_ftruncate64      84    Linux sparc32 Specific			   */
+#define __NR_swapon              85 /* Common                                      */
+#define __NR_getitimer           86 /* Common                                      */
+/* #define __NR_setuid32         87    Linux sparc32, gethostname under SunOS      */
+#define __NR_sethostname         88 /* Common                                      */
+/* #define __NR_setgid32         89    Linux sparc32, getdtablesize under SunOS    */
+#define __NR_dup2                90 /* Common                                      */
+/* #define __NR_setfsuid32       91    Linux sparc32, getdopt under SunOS          */
+#define __NR_fcntl               92 /* Common                                      */
+#define __NR_select              93 /* Common                                      */
+/* #define __NR_setfsgid32       94    Linux sparc32, setdopt under SunOS          */
+#define __NR_fsync               95 /* Common                                      */
+#define __NR_setpriority         96 /* Common                                      */
+#define __NR_socket              97 /* Common                                      */
+#define __NR_connect             98 /* Common                                      */
+#define __NR_accept              99 /* Common                                      */
+#define __NR_getpriority        100 /* Common                                      */
+#define __NR_rt_sigreturn       101 /* Linux Specific                              */
+#define __NR_rt_sigaction       102 /* Linux Specific                              */
+#define __NR_rt_sigprocmask     103 /* Linux Specific                              */
+#define __NR_rt_sigpending      104 /* Linux Specific                              */
+#define __NR_rt_sigtimedwait    105 /* Linux Specific                              */
+#define __NR_rt_sigqueueinfo    106 /* Linux Specific                              */
+#define __NR_rt_sigsuspend      107 /* Linux Specific                              */
+#define __NR_setresuid          108 /* Linux Specific, sigvec under SunOS	   */
+#define __NR_getresuid          109 /* Linux Specific, sigblock under SunOS	   */
+#define __NR_setresgid          110 /* Linux Specific, sigsetmask under SunOS	   */
+#define __NR_getresgid          111 /* Linux Specific, sigpause under SunOS	   */
+/* #define __NR_setregid32       75    Linux sparc32, sigstack under SunOS         */
+#define __NR_recvmsg            113 /* Common                                      */
+#define __NR_sendmsg            114 /* Common                                      */
+/* #define __NR_getgroups32     115    Linux sparc32, vtrace under SunOS           */
+#define __NR_gettimeofday       116 /* Common                                      */
+#define __NR_getrusage          117 /* Common                                      */
+#define __NR_getsockopt         118 /* Common                                      */
+#define __NR_getcwd		119 /* Linux Specific				   */
+#define __NR_readv              120 /* Common                                      */
+#define __NR_writev             121 /* Common                                      */
+#define __NR_settimeofday       122 /* Common                                      */
+#define __NR_fchown             123 /* Common                                      */
+#define __NR_fchmod             124 /* Common                                      */
+#define __NR_recvfrom           125 /* Common                                      */
+#define __NR_setreuid           126 /* Common                                      */
+#define __NR_setregid           127 /* Common                                      */
+#define __NR_rename             128 /* Common                                      */
+#define __NR_truncate           129 /* Common                                      */
+#define __NR_ftruncate          130 /* Common                                      */
+#define __NR_flock              131 /* Common                                      */
+#define __NR_lstat64		132 /* Linux Specific                              */
+#define __NR_sendto             133 /* Common                                      */
+#define __NR_shutdown           134 /* Common                                      */
+#define __NR_socketpair         135 /* Common                                      */
+#define __NR_mkdir              136 /* Common                                      */
+#define __NR_rmdir              137 /* Common                                      */
+#define __NR_utimes             138 /* SunOS Specific                              */
+#define __NR_stat64		139 /* Linux Specific			           */
+#define __NR_sendfile64         140 /* adjtime under SunOS                         */
+#define __NR_getpeername        141 /* Common                                      */
+#define __NR_futex              142 /* gethostid under SunOS                       */
+#define __NR_gettid             143 /* ENOSYS under SunOS                          */
+#define __NR_getrlimit		144 /* Common                                      */
+#define __NR_setrlimit          145 /* Common                                      */
+#define __NR_pivot_root		146 /* Linux Specific, killpg under SunOS          */
+#define __NR_prctl		147 /* ENOSYS under SunOS                          */
+#define __NR_pciconfig_read	148 /* ENOSYS under SunOS                          */
+#define __NR_pciconfig_write	149 /* ENOSYS under SunOS                          */
+#define __NR_getsockname        150 /* Common                                      */
+#define __NR_inotify_init       151 /* Linux specific                              */
+#define __NR_inotify_add_watch  152 /* Linux specific                              */
+#define __NR_poll               153 /* Common                                      */
+#define __NR_getdents64		154 /* Linux specific				   */
+/* #define __NR_fcntl64         155    Linux sparc32 Specific                      */
+#define __NR_inotify_rm_watch   156 /* Linux specific				   */
+#define __NR_statfs             157 /* Common                                      */
+#define __NR_fstatfs            158 /* Common                                      */
+#define __NR_umount             159 /* Common                                      */
+#define __NR_sched_set_affinity 160 /* Linux specific, async_daemon under SunOS    */
+#define __NR_sched_get_affinity 161 /* Linux specific, getfh under SunOS           */
+#define __NR_getdomainname      162 /* SunOS Specific                              */
+#define __NR_setdomainname      163 /* Common                                      */
+#define __NR_utrap_install	164 /* SYSV ABI/v9 required			   */
+#define __NR_quotactl           165 /* Common                                      */
+#define __NR_set_tid_address    166 /* Linux specific, exportfs under SunOS        */
+#define __NR_mount              167 /* Common                                      */
+#define __NR_ustat              168 /* Common                                      */
+#define __NR_setxattr           169 /* SunOS: semsys                               */
+#define __NR_lsetxattr          170 /* SunOS: msgsys                               */
+#define __NR_fsetxattr          171 /* SunOS: shmsys                               */
+#define __NR_getxattr           172 /* SunOS: auditsys                             */
+#define __NR_lgetxattr          173 /* SunOS: rfssys                               */
+#define __NR_getdents           174 /* Common                                      */
+#define __NR_setsid             175 /* Common                                      */
+#define __NR_fchdir             176 /* Common                                      */
+#define __NR_fgetxattr          177 /* SunOS: fchroot                              */
+#define __NR_listxattr          178 /* SunOS: vpixsys                              */
+#define __NR_llistxattr         179 /* SunOS: aioread                              */
+#define __NR_flistxattr         180 /* SunOS: aiowrite                             */
+#define __NR_removexattr        181 /* SunOS: aiowait                              */
+#define __NR_lremovexattr       182 /* SunOS: aiocancel                            */
+#define __NR_sigpending         183 /* Common                                      */
+#define __NR_query_module	184 /* Linux Specific				   */
+#define __NR_setpgid            185 /* Common                                      */
+#define __NR_fremovexattr       186 /* SunOS: pathconf                             */
+#define __NR_tkill              187 /* SunOS: fpathconf                            */
+#define __NR_exit_group		188 /* Linux specific, sysconf undef SunOS         */
+#define __NR_uname              189 /* Linux Specific                              */
+#define __NR_init_module        190 /* Linux Specific                              */
+#define __NR_personality        191 /* Linux Specific                              */
+#define __NR_remap_file_pages   192 /* Linux Specific                              */
+#define __NR_epoll_create       193 /* Linux Specific                              */
+#define __NR_epoll_ctl          194 /* Linux Specific                              */
+#define __NR_epoll_wait         195 /* Linux Specific                              */
+#define __NR_ioprio_set         196 /* Linux Specific                              */
+#define __NR_getppid            197 /* Linux Specific                              */
+#define __NR_sigaction          198 /* Linux Specific                              */
+#define __NR_sgetmask           199 /* Linux Specific                              */
+#define __NR_ssetmask           200 /* Linux Specific                              */
+#define __NR_sigsuspend         201 /* Linux Specific                              */
+#define __NR_oldlstat           202 /* Linux Specific                              */
+#define __NR_uselib             203 /* Linux Specific                              */
+#define __NR_readdir            204 /* Linux Specific                              */
+#define __NR_readahead          205 /* Linux Specific                              */
+#define __NR_socketcall         206 /* Linux Specific                              */
+#define __NR_syslog             207 /* Linux Specific                              */
+#define __NR_lookup_dcookie     208 /* Linux Specific                              */
+#define __NR_fadvise64          209 /* Linux Specific                              */
+#define __NR_fadvise64_64       210 /* Linux Specific                              */
+#define __NR_tgkill             211 /* Linux Specific                              */
+#define __NR_waitpid            212 /* Linux Specific                              */
+#define __NR_swapoff            213 /* Linux Specific                              */
+#define __NR_sysinfo            214 /* Linux Specific                              */
+#define __NR_ipc                215 /* Linux Specific                              */
+#define __NR_sigreturn          216 /* Linux Specific                              */
+#define __NR_clone              217 /* Linux Specific                              */
+#define __NR_ioprio_get         218 /* Linux Specific                              */
+#define __NR_adjtimex           219 /* Linux Specific                              */
+#define __NR_sigprocmask        220 /* Linux Specific                              */
+#define __NR_create_module      221 /* Linux Specific                              */
+#define __NR_delete_module      222 /* Linux Specific                              */
+#define __NR_get_kernel_syms    223 /* Linux Specific                              */
+#define __NR_getpgid            224 /* Linux Specific                              */
+#define __NR_bdflush            225 /* Linux Specific                              */
+#define __NR_sysfs              226 /* Linux Specific                              */
+#define __NR_afs_syscall        227 /* Linux Specific                              */
+#define __NR_setfsuid           228 /* Linux Specific                              */
+#define __NR_setfsgid           229 /* Linux Specific                              */
+#define __NR__newselect         230 /* Linux Specific                              */
+#ifdef __KERNEL__
+#define __NR_time		231 /* Linux sparc32                               */
+#endif
+#define __NR_splice             232 /* Linux Specific                              */
+#define __NR_stime              233 /* Linux Specific                              */
+#define __NR_statfs64           234 /* Linux Specific                              */
+#define __NR_fstatfs64          235 /* Linux Specific                              */
+#define __NR__llseek            236 /* Linux Specific                              */
+#define __NR_mlock              237
+#define __NR_munlock            238
+#define __NR_mlockall           239
+#define __NR_munlockall         240
+#define __NR_sched_setparam     241
+#define __NR_sched_getparam     242
+#define __NR_sched_setscheduler 243
+#define __NR_sched_getscheduler 244
+#define __NR_sched_yield        245
+#define __NR_sched_get_priority_max 246
+#define __NR_sched_get_priority_min 247
+#define __NR_sched_rr_get_interval  248
+#define __NR_nanosleep          249
+#define __NR_mremap             250
+#define __NR__sysctl            251
+#define __NR_getsid             252
+#define __NR_fdatasync          253
+#define __NR_nfsservctl         254
+#define __NR_sync_file_range	255
+#define __NR_clock_settime	256
+#define __NR_clock_gettime	257
+#define __NR_clock_getres	258
+#define __NR_clock_nanosleep	259
+#define __NR_sched_getaffinity	260
+#define __NR_sched_setaffinity	261
+#define __NR_timer_settime	262
+#define __NR_timer_gettime	263
+#define __NR_timer_getoverrun	264
+#define __NR_timer_delete	265
+#define __NR_timer_create	266
+/* #define __NR_vserver		267 Reserved for VSERVER */
+#define __NR_io_setup		268
+#define __NR_io_destroy		269
+#define __NR_io_submit		270
+#define __NR_io_cancel		271
+#define __NR_io_getevents	272
+#define __NR_mq_open		273
+#define __NR_mq_unlink		274
+#define __NR_mq_timedsend	275
+#define __NR_mq_timedreceive	276
+#define __NR_mq_notify		277
+#define __NR_mq_getsetattr	278
+#define __NR_waitid		279
+#define __NR_tee		280
+#define __NR_add_key		281
+#define __NR_request_key	282
+#define __NR_keyctl		283
+#define __NR_openat		284
+#define __NR_mkdirat		285
+#define __NR_mknodat		286
+#define __NR_fchownat		287
+#define __NR_futimesat		288
+#define __NR_fstatat64		289
+#define __NR_unlinkat		290
+#define __NR_renameat		291
+#define __NR_linkat		292
+#define __NR_symlinkat		293
+#define __NR_readlinkat		294
+#define __NR_fchmodat		295
+#define __NR_faccessat		296
+#define __NR_pselect6		297
+#define __NR_ppoll		298
+#define __NR_unshare		299
+#define __NR_set_robust_list	300
+#define __NR_get_robust_list	301
+#define __NR_migrate_pages	302
+#define __NR_mbind		303
+#define __NR_get_mempolicy	304
+#define __NR_set_mempolicy	305
+#define __NR_kexec_load		306
+#define __NR_move_pages		307
+#define __NR_getcpu		308
+#define __NR_epoll_pwait	309
+#define __NR_utimensat		310
+#define __NR_signalfd		311
+#define __NR_timerfd_create	312
+#define __NR_eventfd		313
+#define __NR_fallocate		314
+#define __NR_timerfd_settime	315
+#define __NR_timerfd_gettime	316
+#define __NR_signalfd4		317
+#define __NR_eventfd2		318
+#define __NR_epoll_create1	319
+#define __NR_dup3		320
+#define __NR_pipe2		321
+#define __NR_inotify_init1	322
+
+#define NR_SYSCALLS		323
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_COMPAT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _SPARC64_UNISTD_H */
diff --git a/arch/sparc/include/asm/upa.h b/arch/sparc/include/asm/upa.h
new file mode 100644
index 0000000..5b16332
--- /dev/null
+++ b/arch/sparc/include/asm/upa.h
@@ -0,0 +1,109 @@
+#ifndef _SPARC64_UPA_H
+#define _SPARC64_UPA_H
+
+#include <asm/asi.h>
+
+/* UPA level registers and defines. */
+
+/* UPA Config Register */
+#define UPA_CONFIG_RESV		0xffffffffc0000000 /* Reserved.                    */
+#define UPA_CONFIG_PCON		0x000000003fc00000 /* Depth of various sys queues. */
+#define UPA_CONFIG_MID		0x00000000003e0000 /* Module ID.                   */
+#define UPA_CONFIG_PCAP		0x000000000001ffff /* Port Capabilities.           */
+
+/* UPA Port ID Register */
+#define UPA_PORTID_FNP		0xff00000000000000 /* Hardcoded to 0xfc on ultra.  */
+#define UPA_PORTID_RESV		0x00fffff800000000 /* Reserved.                    */
+#define UPA_PORTID_ECCVALID     0x0000000400000000 /* Zero if mod can generate ECC */
+#define UPA_PORTID_ONEREAD      0x0000000200000000 /* Set if mod generates P_RASB  */
+#define UPA_PORTID_PINTRDQ      0x0000000180000000 /* # outstanding P_INT_REQ's    */
+#define UPA_PORTID_PREQDQ       0x000000007e000000 /* slave-wr's to mod supported  */
+#define UPA_PORTID_PREQRD       0x0000000001e00000 /* # incoming P_REQ's supported */
+#define UPA_PORTID_UPACAP       0x00000000001f0000 /* UPA capabilities of mod      */
+#define UPA_PORTID_ID           0x000000000000ffff /* Module Identification bits  */
+
+/* UPA I/O space accessors */
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+static inline unsigned char _upa_readb(unsigned long addr)
+{
+	unsigned char ret;
+
+	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* upa_readb */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline unsigned short _upa_readw(unsigned long addr)
+{
+	unsigned short ret;
+
+	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* upa_readw */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline unsigned int _upa_readl(unsigned long addr)
+{
+	unsigned int ret;
+
+	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* upa_readl */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline unsigned long _upa_readq(unsigned long addr)
+{
+	unsigned long ret;
+
+	__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* upa_readq */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline void _upa_writeb(unsigned char b, unsigned long addr)
+{
+	__asm__ __volatile__("stba\t%0, [%1] %2\t/* upa_writeb */"
+			     : /* no outputs */
+			     : "r" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _upa_writew(unsigned short w, unsigned long addr)
+{
+	__asm__ __volatile__("stha\t%0, [%1] %2\t/* upa_writew */"
+			     : /* no outputs */
+			     : "r" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _upa_writel(unsigned int l, unsigned long addr)
+{
+	__asm__ __volatile__("stwa\t%0, [%1] %2\t/* upa_writel */"
+			     : /* no outputs */
+			     : "r" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _upa_writeq(unsigned long q, unsigned long addr)
+{
+	__asm__ __volatile__("stxa\t%0, [%1] %2\t/* upa_writeq */"
+			     : /* no outputs */
+			     : "r" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+#define upa_readb(__addr)		(_upa_readb((unsigned long)(__addr)))
+#define upa_readw(__addr)		(_upa_readw((unsigned long)(__addr)))
+#define upa_readl(__addr)		(_upa_readl((unsigned long)(__addr)))
+#define upa_readq(__addr)		(_upa_readq((unsigned long)(__addr)))
+#define upa_writeb(__b, __addr)		(_upa_writeb((__b), (unsigned long)(__addr)))
+#define upa_writew(__w, __addr)		(_upa_writew((__w), (unsigned long)(__addr)))
+#define upa_writel(__l, __addr)		(_upa_writel((__l), (unsigned long)(__addr)))
+#define upa_writeq(__q, __addr)		(_upa_writeq((__q), (unsigned long)(__addr)))
+#endif /* __KERNEL__ && !__ASSEMBLY__ */
+
+#endif /* !(_SPARC64_UPA_H) */
diff --git a/arch/sparc/include/asm/user.h b/arch/sparc/include/asm/user.h
new file mode 100644
index 0000000..3400ea8
--- /dev/null
+++ b/arch/sparc/include/asm/user.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC_USER_H
+#define _SPARC_USER_H
+
+/* Nothing to define.  */
+
+#endif /* !(_SPARC_USER_H) */
diff --git a/arch/sparc/include/asm/utrap.h b/arch/sparc/include/asm/utrap.h
new file mode 100644
index 0000000..b10e527
--- /dev/null
+++ b/arch/sparc/include/asm/utrap.h
@@ -0,0 +1,51 @@
+/*
+ * include/asm/utrap.h
+ *
+ * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __ASM_SPARC64_UTRAP_H
+#define __ASM_SPARC64_UTRAP_H
+
+#define UT_INSTRUCTION_EXCEPTION		1
+#define UT_INSTRUCTION_ERROR			2
+#define UT_INSTRUCTION_PROTECTION		3
+#define UT_ILLTRAP_INSTRUCTION			4
+#define UT_ILLEGAL_INSTRUCTION			5
+#define UT_PRIVILEGED_OPCODE			6
+#define UT_FP_DISABLED				7
+#define UT_FP_EXCEPTION_IEEE_754		8
+#define UT_FP_EXCEPTION_OTHER			9
+#define UT_TAG_OVERVIEW				10
+#define UT_DIVISION_BY_ZERO			11
+#define UT_DATA_EXCEPTION			12
+#define UT_DATA_ERROR				13
+#define UT_DATA_PROTECTION			14
+#define UT_MEM_ADDRESS_NOT_ALIGNED		15
+#define UT_PRIVILEGED_ACTION			16
+#define UT_ASYNC_DATA_ERROR			17
+#define UT_TRAP_INSTRUCTION_16			18
+#define UT_TRAP_INSTRUCTION_17			19
+#define UT_TRAP_INSTRUCTION_18			20
+#define UT_TRAP_INSTRUCTION_19			21
+#define UT_TRAP_INSTRUCTION_20			22
+#define UT_TRAP_INSTRUCTION_21			23
+#define UT_TRAP_INSTRUCTION_22			24
+#define UT_TRAP_INSTRUCTION_23			25
+#define UT_TRAP_INSTRUCTION_24			26
+#define UT_TRAP_INSTRUCTION_25			27
+#define UT_TRAP_INSTRUCTION_26			28
+#define UT_TRAP_INSTRUCTION_27			29
+#define UT_TRAP_INSTRUCTION_28			30
+#define UT_TRAP_INSTRUCTION_29			31
+#define UT_TRAP_INSTRUCTION_30			32
+#define UT_TRAP_INSTRUCTION_31			33
+
+#define	UTH_NOCHANGE				(-1)
+
+#ifndef __ASSEMBLY__
+typedef int utrap_entry_t;
+typedef void *utrap_handler_t;
+#endif /* __ASSEMBLY__ */
+
+#endif /* !(__ASM_SPARC64_PROCESSOR_H) */
diff --git a/arch/sparc/include/asm/vac-ops.h b/arch/sparc/include/asm/vac-ops.h
new file mode 100644
index 0000000..d105276
--- /dev/null
+++ b/arch/sparc/include/asm/vac-ops.h
@@ -0,0 +1,134 @@
+#ifndef _SPARC_VAC_OPS_H
+#define _SPARC_VAC_OPS_H
+
+/* vac-ops.h: Inline assembly routines to do operations on the Sparc
+ *            VAC (virtual address cache) for the sun4c.
+ *
+ * Copyright (C) 1994, David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#include <asm/sysen.h>
+#include <asm/contregs.h>
+#include <asm/asi.h>
+
+/* The SUN4C models have a virtually addressed write-through
+ * cache.
+ *
+ * The cache tags are directly accessible through an ASI and
+ * each have the form:
+ *
+ * ------------------------------------------------------------
+ * | MBZ | CONTEXT | WRITE | PRIV | VALID | MBZ | TagID | MBZ |
+ * ------------------------------------------------------------
+ *  31 25  24   22     21     20     19    18 16  15   2  1  0
+ *
+ * MBZ: These bits are either unused and/or reserved and should
+ *      be written as zeroes.
+ *
+ * CONTEXT: Records the context to which this cache line belongs.
+ *
+ * WRITE: A copy of the writable bit from the mmu pte access bits.
+ *
+ * PRIV: A copy of the privileged bit from the pte access bits.
+ *
+ * VALID: If set, this line is valid, else invalid.
+ *
+ * TagID: Fourteen bits of tag ID.
+ *
+ * Every virtual address is seen by the cache like this:
+ *
+ * ----------------------------------------
+ * |  RESV  | TagID | LINE | BYTE-in-LINE |
+ * ----------------------------------------
+ *  31    30 29   16 15   4 3            0
+ *
+ * RESV: Unused/reserved.
+ *
+ * TagID: Used to match the Tag-ID in that vac tags.
+ *
+ * LINE: Which line within the cache
+ *
+ * BYTE-in-LINE: Which byte within the cache line.
+ */
+
+/* Sun4c VAC Tags */
+#define S4CVACTAG_CID      0x01c00000
+#define S4CVACTAG_W        0x00200000
+#define S4CVACTAG_P        0x00100000
+#define S4CVACTAG_V        0x00080000
+#define S4CVACTAG_TID      0x0000fffc
+
+/* Sun4c VAC Virtual Address */
+/* These aren't used, why bother? (Anton) */
+#if 0
+#define S4CVACVA_TID       0x3fff0000
+#define S4CVACVA_LINE      0x0000fff0
+#define S4CVACVA_BIL       0x0000000f
+#endif
+
+/* The indexing of cache lines creates a problem.  Because the line
+ * field of a virtual address extends past the page offset within
+ * the virtual address it is possible to have what are called
+ * 'bad aliases' which will create inconsistencies.  So we must make
+ * sure that within a context that if a physical page is mapped
+ * more than once, that 'extra' line bits are the same.  If this is
+ * not the case, and thus is a 'bad alias' we must turn off the
+ * cacheable bit in the pte's of all such pages.
+ */
+
+#ifdef CONFIG_SUN4
+#define S4CVAC_BADBITS     0x0001e000
+#else
+#define S4CVAC_BADBITS    0x0000f000
+#endif
+
+/* The following is true if vaddr1 and vaddr2 would cause
+ * a 'bad alias'.
+ */
+#define S4CVAC_BADALIAS(vaddr1, vaddr2) \
+        ((((unsigned long) (vaddr1)) ^ ((unsigned long) (vaddr2))) & \
+	 (S4CVAC_BADBITS))
+
+/* The following structure describes the characteristics of a sun4c
+ * VAC as probed from the prom during boot time.
+ */
+struct sun4c_vac_props {
+	unsigned int num_bytes;     /* Size of the cache */
+	unsigned int num_lines;     /* Number of cache lines */
+	unsigned int do_hwflushes;  /* Hardware flushing available? */
+	enum { VAC_NONE, VAC_WRITE_THROUGH,
+	    VAC_WRITE_BACK } type;  /* What type of VAC? */
+	unsigned int linesize;      /* Size of each line in bytes */
+	unsigned int log2lsize;     /* log2(linesize) */
+	unsigned int on;            /* VAC is enabled */
+};
+
+extern struct sun4c_vac_props sun4c_vacinfo;
+
+/* sun4c_enable_vac() enables the sun4c virtual address cache. */
+static inline void sun4c_enable_vac(void)
+{
+	__asm__ __volatile__("lduba [%0] %1, %%g1\n\t"
+			     "or    %%g1, %2, %%g1\n\t"
+			     "stba  %%g1, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" ((unsigned int) AC_SENABLE),
+			     "i" (ASI_CONTROL), "i" (SENABLE_CACHE)
+			     : "g1", "memory");
+	sun4c_vacinfo.on = 1;
+}
+
+/* sun4c_disable_vac() disables the virtual address cache. */
+static inline void sun4c_disable_vac(void)
+{
+	__asm__ __volatile__("lduba [%0] %1, %%g1\n\t"
+			     "andn  %%g1, %2, %%g1\n\t"
+			     "stba  %%g1, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" ((unsigned int) AC_SENABLE),
+			     "i" (ASI_CONTROL), "i" (SENABLE_CACHE)
+			     : "g1", "memory");
+	sun4c_vacinfo.on = 0;
+}
+
+#endif /* !(_SPARC_VAC_OPS_H) */
diff --git a/arch/sparc/include/asm/vaddrs.h b/arch/sparc/include/asm/vaddrs.h
new file mode 100644
index 0000000..541e137
--- /dev/null
+++ b/arch/sparc/include/asm/vaddrs.h
@@ -0,0 +1,64 @@
+#ifndef _SPARC_VADDRS_H
+#define _SPARC_VADDRS_H
+
+#include <asm/head.h>
+
+/*
+ * asm/vaddrs.h:  Here we define the virtual addresses at
+ *                      which important things will be mapped.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 2000 Anton Blanchard (anton@samba.org)
+ */
+
+#define SRMMU_MAXMEM		0x0c000000
+
+#define SRMMU_NOCACHE_VADDR	(KERNBASE + SRMMU_MAXMEM)
+				/* = 0x0fc000000 */
+/* XXX Empiricals - this needs to go away - KMW */
+#define SRMMU_MIN_NOCACHE_PAGES (550)
+#define SRMMU_MAX_NOCACHE_PAGES	(1280)
+
+/* The following constant is used in mm/srmmu.c::srmmu_nocache_calcsize()
+ * to determine the amount of memory that will be reserved as nocache:
+ *
+ * 256 pages will be taken as nocache per each
+ * SRMMU_NOCACHE_ALCRATIO MB of system memory.
+ *
+ * limits enforced:	nocache minimum = 256 pages
+ *			nocache maximum = 1280 pages
+ */
+#define SRMMU_NOCACHE_ALCRATIO	64	/* 256 pages per 64MB of system RAM */
+
+#define SUN4M_IOBASE_VADDR	0xfd000000 /* Base for mapping pages */
+#define IOBASE_VADDR		0xfe000000
+#define IOBASE_END		0xfe600000
+
+/*
+ * On the sun4/4c we need a place
+ * to reliably map locked down kernel data.  This includes the
+ * task_struct and kernel stack pages of each process plus the
+ * scsi buffers during dvma IO transfers, also the floppy buffers
+ * during pseudo dma which runs with traps off (no faults allowed).
+ * Some quick calculations yield:
+ *       NR_TASKS <512> * (3 * PAGE_SIZE) == 0x600000
+ * Subtract this from 0xc00000 and you get 0x927C0 of vm left
+ * over to map SCSI dvma + floppy pseudo-dma buffers.  So be
+ * careful if you change NR_TASKS or else there won't be enough
+ * room for it all.
+ */
+#define SUN4C_LOCK_VADDR	0xff000000
+#define SUN4C_LOCK_END		0xffc00000
+
+#define KADB_DEBUGGER_BEGVM	0xffc00000 /* Where kern debugger is in virt-mem */
+#define KADB_DEBUGGER_ENDVM	0xffd00000
+#define DEBUG_FIRSTVADDR	KADB_DEBUGGER_BEGVM
+#define DEBUG_LASTVADDR		KADB_DEBUGGER_ENDVM
+
+#define LINUX_OPPROM_BEGVM	0xffd00000
+#define LINUX_OPPROM_ENDVM	0xfff00000
+
+#define DVMA_VADDR		0xfff00000 /* Base area of the DVMA on suns */
+#define DVMA_END		0xfffc0000
+
+#endif /* !(_SPARC_VADDRS_H) */
diff --git a/arch/sparc/include/asm/vfc_ioctls.h b/arch/sparc/include/asm/vfc_ioctls.h
new file mode 100644
index 0000000..af8b690
--- /dev/null
+++ b/arch/sparc/include/asm/vfc_ioctls.h
@@ -0,0 +1,58 @@
+/* Copyright (c) 1996 by Manish Vachharajani */
+
+#ifndef _LINUX_VFC_IOCTLS_H_
+#define	_LINUX_VFC_IOCTLS_H_
+
+	/* IOCTLs */
+#define VFC_IOCTL(a)          (('j' << 8) | a)
+#define VFCGCTRL	(VFC_IOCTL (0))	        /* get vfc attributes */
+#define VFCSCTRL	(VFC_IOCTL (1))  	/* set vfc attributes */
+#define VFCGVID		(VFC_IOCTL (2)) 	/* get video decoder attributes */
+#define VFCSVID		(VFC_IOCTL (3))	        /* set video decoder attributes */
+#define VFCHUE		(VFC_IOCTL (4))   	/* set hue */
+#define VFCPORTCHG	(VFC_IOCTL (5))  	/* change port */
+#define VFCRDINFO	(VFC_IOCTL (6))  	/* read info */
+
+	/* Options for setting the vfc attributes and status */
+#define MEMPRST		0x1	/* reset FIFO ptr. */
+#define CAPTRCMD	0x2	/* start capture and wait */
+#define DIAGMODE	0x3	/* diag mode */
+#define NORMMODE	0x4	/* normal mode */
+#define CAPTRSTR	0x5	/* start capture */
+#define CAPTRWAIT	0x6	/* wait for capture to finish */
+
+
+	/* Options for the decoder */
+#define STD_NTSC	0x1	/* NTSC mode */
+#define STD_PAL		0x2	/* PAL mode */
+#define COLOR_ON	0x3	/* force color ON */
+#define MONO		0x4	/* force color OFF */
+
+	/* Values returned by ioctl 2 */
+
+#define NO_LOCK	        1
+#define NTSC_COLOR	2
+#define NTSC_NOCOLOR    3
+#define PAL_COLOR	4
+#define PAL_NOCOLOR	5
+
+/* Not too sure what this does yet */
+	/* Options for setting Field number */
+#define ODD_FIELD	0x1
+#define EVEN_FIELD	0x0
+#define ACTIVE_ONLY     0x2
+#define NON_ACTIVE	0x0
+
+/* Debug options */
+#define VFC_I2C_SEND 0
+#define VFC_I2C_RECV 1
+
+struct vfc_debug_inout
+{
+	unsigned long addr;
+	unsigned long ret;
+	unsigned long len;
+	unsigned char __user *buffer;
+};
+
+#endif /* _LINUX_VFC_IOCTLS_H_ */
diff --git a/arch/sparc/include/asm/vga.h b/arch/sparc/include/asm/vga.h
new file mode 100644
index 0000000..c69d5b2
--- /dev/null
+++ b/arch/sparc/include/asm/vga.h
@@ -0,0 +1,33 @@
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ */
+
+#ifndef _LINUX_ASM_VGA_H_
+#define _LINUX_ASM_VGA_H_
+
+#include <asm/types.h>
+
+#define VT_BUF_HAVE_RW
+
+#undef scr_writew
+#undef scr_readw
+
+static inline void scr_writew(u16 val, u16 *addr)
+{
+	BUG_ON((long) addr >= 0);
+
+	*addr = val;
+}
+
+static inline u16 scr_readw(const u16 *addr)
+{
+	BUG_ON((long) addr >= 0);
+
+	return *addr;
+}
+
+#define VGA_MAP_MEM(x,s) (x)
+
+#endif
diff --git a/arch/sparc/include/asm/viking.h b/arch/sparc/include/asm/viking.h
new file mode 100644
index 0000000..989930a
--- /dev/null
+++ b/arch/sparc/include/asm/viking.h
@@ -0,0 +1,253 @@
+/*
+ * viking.h:  Defines specific to the GNU/Viking MBUS module.
+ *            This is SRMMU stuff.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_VIKING_H
+#define _SPARC_VIKING_H
+
+#include <asm/asi.h>
+#include <asm/mxcc.h>
+#include <asm/pgtsrmmu.h>
+
+/* Bits in the SRMMU control register for GNU/Viking modules.
+ *
+ * -----------------------------------------------------------
+ * |impl-vers| RSV |TC|AC|SP|BM|PC|MBM|SB|IC|DC|PSO|RSV|NF|ME|
+ * -----------------------------------------------------------
+ *  31     24 23-17 16 15 14 13 12 11  10  9  8  7  6-2  1  0
+ *
+ * TC: Tablewalk Cacheable -- 0 = Twalks are not cacheable in E-cache
+ *                            1 = Twalks are cacheable in E-cache
+ *
+ * GNU/Viking will only cache tablewalks in the E-cache (mxcc) if present
+ * and never caches them internally (or so states the docs).  Therefore
+ * for machines lacking an E-cache (ie. in MBUS mode) this bit must
+ * remain cleared.
+ *
+ * AC: Alternate Cacheable -- 0 = Passthru physical accesses not cacheable
+ *                            1 = Passthru physical accesses cacheable
+ *
+ * This indicates whether accesses are cacheable when no cachable bit
+ * is present in the pte when the processor is in boot-mode or the
+ * access does not need pte's for translation (ie. pass-thru ASI's).
+ * "Cachable" is only referring to E-cache (if present) and not the
+ * on chip split I/D caches of the GNU/Viking.
+ *
+ * SP: SnooP Enable -- 0 = bus snooping off, 1 = bus snooping on
+ *
+ * This enables snooping on the GNU/Viking bus.  This must be on
+ * for the hardware cache consistency mechanisms of the GNU/Viking
+ * to work at all.  On non-mxcc GNU/Viking modules the split I/D
+ * caches will snoop regardless of whether they are enabled, this
+ * takes care of the case where the I or D or both caches are turned
+ * off yet still contain valid data.  Note also that this bit does
+ * not affect GNU/Viking store-buffer snoops, those happen if the
+ * store-buffer is enabled no matter what.
+ *
+ * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
+ *
+ * This indicates whether the GNU/Viking is in boot-mode or not,
+ * if it is then all instruction fetch physical addresses are
+ * computed as 0xff0000000 + low 28 bits of requested address.
+ * GNU/Viking boot-mode does not affect data accesses.  Also,
+ * in boot mode instruction accesses bypass the split on chip I/D
+ * caches, they may be cached by the GNU/MXCC if present and enabled.
+ *
+ * MBM: MBus Mode -- 0 = not in MBus mode, 1 = in MBus mode
+ *
+ * This indicated the GNU/Viking configuration present.  If in
+ * MBUS mode, the GNU/Viking lacks a GNU/MXCC E-cache.  If it is
+ * not then the GNU/Viking is on a module VBUS connected directly
+ * to a GNU/MXCC cache controller.  The GNU/MXCC can be thus connected
+ * to either an GNU/MBUS (sun4m) or the packet-switched GNU/XBus (sun4d).
+ *
+ * SB: StoreBuffer enable -- 0 = store buffer off, 1 = store buffer on
+ *
+ * The GNU/Viking store buffer allows the chip to continue execution
+ * after a store even if the data cannot be placed in one of the
+ * caches during that cycle.  If disabled, all stores operations
+ * occur synchronously.
+ *
+ * IC: Instruction Cache -- 0 = off, 1 = on
+ * DC: Data Cache -- 0 = off, 1 = 0n
+ *
+ * These bits enable the on-cpu GNU/Viking split I/D caches.  Note,
+ * as mentioned above, these caches will snoop the bus in GNU/MBUS
+ * configurations even when disabled to avoid data corruption.
+ *
+ * NF: No Fault -- 0 = faults generate traps, 1 = faults don't trap
+ * ME: MMU enable -- 0 = mmu not translating, 1 = mmu translating
+ *
+ */
+
+#define VIKING_MMUENABLE    0x00000001
+#define VIKING_NOFAULT      0x00000002
+#define VIKING_PSO          0x00000080
+#define VIKING_DCENABLE     0x00000100   /* Enable data cache */
+#define VIKING_ICENABLE     0x00000200   /* Enable instruction cache */
+#define VIKING_SBENABLE     0x00000400   /* Enable store buffer */
+#define VIKING_MMODE        0x00000800   /* MBUS mode */
+#define VIKING_PCENABLE     0x00001000   /* Enable parity checking */
+#define VIKING_BMODE        0x00002000   
+#define VIKING_SPENABLE     0x00004000   /* Enable bus cache snooping */
+#define VIKING_ACENABLE     0x00008000   /* Enable alternate caching */
+#define VIKING_TCENABLE     0x00010000   /* Enable table-walks to be cached */
+#define VIKING_DPENABLE     0x00040000   /* Enable the data prefetcher */
+
+/*
+ * GNU/Viking Breakpoint Action Register fields.
+ */
+#define VIKING_ACTION_MIX   0x00001000   /* Enable multiple instructions */
+
+/*
+ * GNU/Viking Cache Tags.
+ */
+#define VIKING_PTAG_VALID   0x01000000   /* Cache block is valid */
+#define VIKING_PTAG_DIRTY   0x00010000   /* Block has been modified */
+#define VIKING_PTAG_SHARED  0x00000100   /* Shared with some other cache */
+
+#ifndef __ASSEMBLY__
+
+static inline void viking_flush_icache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_IC_FLCLEAR)
+			     : "memory");
+}
+
+static inline void viking_flush_dcache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_DC_FLCLEAR)
+			     : "memory");
+}
+
+static inline void viking_unlock_icache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (0x80000000), "i" (ASI_M_IC_FLCLEAR)
+			     : "memory");
+}
+
+static inline void viking_unlock_dcache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (0x80000000), "i" (ASI_M_DC_FLCLEAR)
+			     : "memory");
+}
+
+static inline void viking_set_bpreg(unsigned long regval)
+{
+	__asm__ __volatile__("sta %0, [%%g0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (regval), "i" (ASI_M_ACTION)
+			     : "memory");
+}
+
+static inline unsigned long viking_get_bpreg(void)
+{
+	unsigned long regval;
+
+	__asm__ __volatile__("lda [%%g0] %1, %0\n\t"
+			     : "=r" (regval)
+			     : "i" (ASI_M_ACTION));
+	return regval;
+}
+
+static inline void viking_get_dcache_ptag(int set, int block,
+					      unsigned long *data)
+{
+	unsigned long ptag = ((set & 0x7f) << 5) | ((block & 0x3) << 26) |
+			     0x80000000;
+	unsigned long info, page;
+
+	__asm__ __volatile__ ("ldda [%2] %3, %%g2\n\t"
+			      "or %%g0, %%g2, %0\n\t"
+			      "or %%g0, %%g3, %1\n\t"
+			      : "=r" (info), "=r" (page)
+			      : "r" (ptag), "i" (ASI_M_DATAC_TAG)
+			      : "g2", "g3");
+	data[0] = info;
+	data[1] = page;
+}
+
+static inline void viking_mxcc_turn_off_parity(unsigned long *mregp,
+						   unsigned long *mxcc_cregp)
+{
+	unsigned long mreg = *mregp;
+	unsigned long mxcc_creg = *mxcc_cregp;
+
+	mreg &= ~(VIKING_PCENABLE);
+	mxcc_creg &= ~(MXCC_CTL_PARE);
+
+	__asm__ __volatile__ ("set 1f, %%g2\n\t"
+			      "andcc %%g2, 4, %%g0\n\t"
+			      "bne 2f\n\t"
+			      " nop\n"
+			      "1:\n\t"
+			      "sta %0, [%%g0] %3\n\t"
+			      "sta %1, [%2] %4\n\t"
+			      "b 1f\n\t"
+			      " nop\n\t"
+			      "nop\n"
+			      "2:\n\t"
+			      "sta %0, [%%g0] %3\n\t"
+			      "sta %1, [%2] %4\n"
+			      "1:\n\t"
+			      : /* no output */
+			      : "r" (mreg), "r" (mxcc_creg),
+			        "r" (MXCC_CREG), "i" (ASI_M_MMUREGS),
+			        "i" (ASI_M_MXCC)
+			      : "g2", "memory", "cc");
+	*mregp = mreg;
+	*mxcc_cregp = mxcc_creg;
+}
+
+static inline unsigned long viking_hwprobe(unsigned long vaddr)
+{
+	unsigned long val;
+
+	vaddr &= PAGE_MASK;
+	/* Probe all MMU entries. */
+	__asm__ __volatile__("lda [%1] %2, %0\n\t"
+			     : "=r" (val)
+			     : "r" (vaddr | 0x400), "i" (ASI_M_FLUSH_PROBE));
+	if (!val)
+		return 0;
+
+	/* Probe region. */
+	__asm__ __volatile__("lda [%1] %2, %0\n\t"
+			     : "=r" (val)
+			     : "r" (vaddr | 0x200), "i" (ASI_M_FLUSH_PROBE));
+	if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) {
+		vaddr &= ~SRMMU_PGDIR_MASK;
+		vaddr >>= PAGE_SHIFT;
+		return val | (vaddr << 8);
+	}
+
+	/* Probe segment. */
+	__asm__ __volatile__("lda [%1] %2, %0\n\t"
+			     : "=r" (val)
+			     : "r" (vaddr | 0x100), "i" (ASI_M_FLUSH_PROBE));
+	if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) {
+		vaddr &= ~SRMMU_REAL_PMD_MASK;
+		vaddr >>= PAGE_SHIFT;
+		return val | (vaddr << 8);
+	}
+
+	/* Probe page. */
+	__asm__ __volatile__("lda [%1] %2, %0\n\t"
+			     : "=r" (val)
+			     : "r" (vaddr), "i" (ASI_M_FLUSH_PROBE));
+	return val;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_VIKING_H) */
diff --git a/arch/sparc/include/asm/vio.h b/arch/sparc/include/asm/vio.h
new file mode 100644
index 0000000..d4de32f
--- /dev/null
+++ b/arch/sparc/include/asm/vio.h
@@ -0,0 +1,406 @@
+#ifndef _SPARC64_VIO_H
+#define _SPARC64_VIO_H
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/completion.h>
+#include <linux/list.h>
+#include <linux/log2.h>
+
+#include <asm/ldc.h>
+#include <asm/mdesc.h>
+
+struct vio_msg_tag {
+	u8			type;
+#define VIO_TYPE_CTRL		0x01
+#define VIO_TYPE_DATA		0x02
+#define VIO_TYPE_ERR		0x04
+
+	u8			stype;
+#define VIO_SUBTYPE_INFO	0x01
+#define VIO_SUBTYPE_ACK		0x02
+#define VIO_SUBTYPE_NACK	0x04
+
+	u16			stype_env;
+#define VIO_VER_INFO		0x0001
+#define VIO_ATTR_INFO		0x0002
+#define VIO_DRING_REG		0x0003
+#define VIO_DRING_UNREG		0x0004
+#define VIO_RDX			0x0005
+#define VIO_PKT_DATA		0x0040
+#define VIO_DESC_DATA		0x0041
+#define VIO_DRING_DATA		0x0042
+#define VNET_MCAST_INFO		0x0101
+
+	u32		sid;
+};
+
+struct vio_rdx {
+	struct vio_msg_tag	tag;
+	u64			resv[6];
+};
+
+struct vio_ver_info {
+	struct vio_msg_tag	tag;
+	u16			major;
+	u16			minor;
+	u8			dev_class;
+#define VDEV_NETWORK		0x01
+#define VDEV_NETWORK_SWITCH	0x02
+#define VDEV_DISK		0x03
+#define VDEV_DISK_SERVER	0x04
+
+	u8			resv1[3];
+	u64			resv2[5];
+};
+
+struct vio_dring_register {
+	struct vio_msg_tag	tag;
+	u64			dring_ident;
+	u32			num_descr;
+	u32			descr_size;
+	u16			options;
+#define VIO_TX_DRING		0x0001
+#define VIO_RX_DRING		0x0002
+	u16			resv;
+	u32			num_cookies;
+	struct ldc_trans_cookie	cookies[0];
+};
+
+struct vio_dring_unregister {
+	struct vio_msg_tag	tag;
+	u64			dring_ident;
+	u64			resv[5];
+};
+
+/* Data transfer modes */
+#define VIO_PKT_MODE		0x01 /* Packet based transfer	*/
+#define VIO_DESC_MODE		0x02 /* In-band descriptors	*/
+#define VIO_DRING_MODE		0x03 /* Descriptor rings	*/
+
+struct vio_dring_data {
+	struct vio_msg_tag	tag;
+	u64			seq;
+	u64			dring_ident;
+	u32			start_idx;
+	u32			end_idx;
+	u8			state;
+#define VIO_DRING_ACTIVE	0x01
+#define VIO_DRING_STOPPED	0x02
+
+	u8			__pad1;
+	u16			__pad2;
+	u32			__pad3;
+	u64			__par4[2];
+};
+
+struct vio_dring_hdr {
+	u8			state;
+#define VIO_DESC_FREE		0x01
+#define VIO_DESC_READY		0x02
+#define VIO_DESC_ACCEPTED	0x03
+#define VIO_DESC_DONE		0x04
+	u8			ack;
+#define VIO_ACK_ENABLE		0x01
+#define VIO_ACK_DISABLE		0x00
+
+	u16			__pad1;
+	u32			__pad2;
+};
+
+/* VIO disk specific structures and defines */
+struct vio_disk_attr_info {
+	struct vio_msg_tag	tag;
+	u8			xfer_mode;
+	u8			vdisk_type;
+#define VD_DISK_TYPE_SLICE	0x01 /* Slice in block device	*/
+#define VD_DISK_TYPE_DISK	0x02 /* Entire block device	*/
+	u16			resv1;
+	u32			vdisk_block_size;
+	u64			operations;
+	u64			vdisk_size;
+	u64			max_xfer_size;
+	u64			resv2[2];
+};
+
+struct vio_disk_desc {
+	struct vio_dring_hdr	hdr;
+	u64			req_id;
+	u8			operation;
+#define VD_OP_BREAD		0x01 /* Block read			*/
+#define VD_OP_BWRITE		0x02 /* Block write			*/
+#define VD_OP_FLUSH		0x03 /* Flush disk contents		*/
+#define VD_OP_GET_WCE		0x04 /* Get write-cache status		*/
+#define VD_OP_SET_WCE		0x05 /* Enable/disable write-cache	*/
+#define VD_OP_GET_VTOC		0x06 /* Get VTOC			*/
+#define VD_OP_SET_VTOC		0x07 /* Set VTOC			*/
+#define VD_OP_GET_DISKGEOM	0x08 /* Get disk geometry		*/
+#define VD_OP_SET_DISKGEOM	0x09 /* Set disk geometry		*/
+#define VD_OP_SCSICMD		0x0a /* SCSI control command		*/
+#define VD_OP_GET_DEVID		0x0b /* Get device ID			*/
+#define VD_OP_GET_EFI		0x0c /* Get EFI				*/
+#define VD_OP_SET_EFI		0x0d /* Set EFI				*/
+	u8			slice;
+	u16			resv1;
+	u32			status;
+	u64			offset;
+	u64			size;
+	u32			ncookies;
+	u32			resv2;
+	struct ldc_trans_cookie	cookies[0];
+};
+
+#define VIO_DISK_VNAME_LEN	8
+#define VIO_DISK_ALABEL_LEN	128
+#define VIO_DISK_NUM_PART	8
+
+struct vio_disk_vtoc {
+	u8			volume_name[VIO_DISK_VNAME_LEN];
+	u16			sector_size;
+	u16			num_partitions;
+	u8			ascii_label[VIO_DISK_ALABEL_LEN];
+	struct {
+		u16		id;
+		u16		perm_flags;
+		u32		resv;
+		u64		start_block;
+		u64		num_blocks;
+	} partitions[VIO_DISK_NUM_PART];
+};
+
+struct vio_disk_geom {
+	u16			num_cyl; /* Num data cylinders		*/
+	u16			alt_cyl; /* Num alternate cylinders	*/
+	u16			beg_cyl; /* Cyl off of fixed head area	*/
+	u16			num_hd;  /* Num heads			*/
+	u16			num_sec; /* Num sectors			*/
+	u16			ifact;   /* Interleave factor		*/
+	u16			apc;     /* Alts per cylinder (SCSI)	*/
+	u16			rpm;	 /* Revolutions per minute	*/
+	u16			phy_cyl; /* Num physical cylinders	*/
+	u16			wr_skip; /* Num sects to skip, writes	*/
+	u16			rd_skip; /* Num sects to skip, writes	*/
+};
+
+struct vio_disk_devid {
+	u16			resv;
+	u16			type;
+	u32			len;
+	char			id[0];
+};
+
+struct vio_disk_efi {
+	u64			lba;
+	u64			len;
+	char			data[0];
+};
+
+/* VIO net specific structures and defines */
+struct vio_net_attr_info {
+	struct vio_msg_tag	tag;
+	u8			xfer_mode;
+	u8			addr_type;
+#define VNET_ADDR_ETHERMAC	0x01
+	u16			ack_freq;
+	u32			resv1;
+	u64			addr;
+	u64			mtu;
+	u64			resv2[3];
+};
+
+#define VNET_NUM_MCAST		7
+
+struct vio_net_mcast_info {
+	struct vio_msg_tag	tag;
+	u8			set;
+	u8			count;
+	u8			mcast_addr[VNET_NUM_MCAST * 6];
+	u32			resv;
+};
+
+struct vio_net_desc {
+	struct vio_dring_hdr	hdr;
+	u32			size;
+	u32			ncookies;
+	struct ldc_trans_cookie	cookies[0];
+};
+
+#define VIO_MAX_RING_COOKIES	24
+
+struct vio_dring_state {
+	u64			ident;
+	void			*base;
+	u64			snd_nxt;
+	u64			rcv_nxt;
+	u32			entry_size;
+	u32			num_entries;
+	u32			prod;
+	u32			cons;
+	u32			pending;
+	int			ncookies;
+	struct ldc_trans_cookie	cookies[VIO_MAX_RING_COOKIES];
+};
+
+static inline void *vio_dring_cur(struct vio_dring_state *dr)
+{
+	return dr->base + (dr->entry_size * dr->prod);
+}
+
+static inline void *vio_dring_entry(struct vio_dring_state *dr,
+				    unsigned int index)
+{
+	return dr->base + (dr->entry_size * index);
+}
+
+static inline u32 vio_dring_avail(struct vio_dring_state *dr,
+				  unsigned int ring_size)
+{
+	BUILD_BUG_ON(!is_power_of_2(ring_size));
+
+	return (dr->pending -
+		((dr->prod - dr->cons) & (ring_size - 1)));
+}
+
+#define VIO_MAX_TYPE_LEN	32
+#define VIO_MAX_COMPAT_LEN	64
+
+struct vio_dev {
+	u64			mp;
+	struct device_node	*dp;
+
+	char			type[VIO_MAX_TYPE_LEN];
+	char			compat[VIO_MAX_COMPAT_LEN];
+	int			compat_len;
+
+	u64			dev_no;
+
+	unsigned long		channel_id;
+
+	unsigned int		tx_irq;
+	unsigned int		rx_irq;
+
+	struct device		dev;
+};
+
+struct vio_driver {
+	struct list_head		node;
+	const struct vio_device_id	*id_table;
+	int (*probe)(struct vio_dev *dev, const struct vio_device_id *id);
+	int (*remove)(struct vio_dev *dev);
+	void (*shutdown)(struct vio_dev *dev);
+	unsigned long			driver_data;
+	struct device_driver		driver;
+};
+
+struct vio_version {
+	u16		major;
+	u16		minor;
+};
+
+struct vio_driver_state;
+struct vio_driver_ops {
+	int	(*send_attr)(struct vio_driver_state *vio);
+	int	(*handle_attr)(struct vio_driver_state *vio, void *pkt);
+	void	(*handshake_complete)(struct vio_driver_state *vio);
+};
+
+struct vio_completion {
+	struct completion	com;
+	int			err;
+	int			waiting_for;
+};
+
+struct vio_driver_state {
+	/* Protects VIO handshake and, optionally, driver private state.  */
+	spinlock_t		lock;
+
+	struct ldc_channel	*lp;
+
+	u32			_peer_sid;
+	u32			_local_sid;
+	struct vio_dring_state	drings[2];
+#define VIO_DRIVER_TX_RING	0
+#define VIO_DRIVER_RX_RING	1
+
+	u8			hs_state;
+#define VIO_HS_INVALID		0x00
+#define VIO_HS_GOTVERS		0x01
+#define VIO_HS_GOT_ATTR		0x04
+#define VIO_HS_SENT_DREG	0x08
+#define VIO_HS_SENT_RDX		0x10
+#define VIO_HS_GOT_RDX_ACK	0x20
+#define VIO_HS_GOT_RDX		0x40
+#define VIO_HS_SENT_RDX_ACK	0x80
+#define VIO_HS_COMPLETE		(VIO_HS_GOT_RDX_ACK | VIO_HS_SENT_RDX_ACK)
+
+	u8			dev_class;
+
+	u8			dr_state;
+#define VIO_DR_STATE_TXREG	0x01
+#define VIO_DR_STATE_RXREG	0x02
+#define VIO_DR_STATE_TXREQ	0x10
+#define VIO_DR_STATE_RXREQ	0x20
+
+	u8			debug;
+#define VIO_DEBUG_HS		0x01
+#define VIO_DEBUG_DATA		0x02
+
+	void			*desc_buf;
+	unsigned int		desc_buf_len;
+
+	struct vio_completion	*cmp;
+
+	struct vio_dev		*vdev;
+
+	struct timer_list	timer;
+
+	struct vio_version	ver;
+
+	struct vio_version	*ver_table;
+	int			ver_table_entries;
+
+	char			*name;
+
+	struct vio_driver_ops	*ops;
+};
+
+#define viodbg(TYPE, f, a...) \
+do {	if (vio->debug & VIO_DEBUG_##TYPE) \
+		printk(KERN_INFO "vio: ID[%lu] " f, \
+		       vio->vdev->channel_id, ## a); \
+} while (0)
+
+extern int vio_register_driver(struct vio_driver *drv);
+extern void vio_unregister_driver(struct vio_driver *drv);
+
+static inline struct vio_driver *to_vio_driver(struct device_driver *drv)
+{
+	return container_of(drv, struct vio_driver, driver);
+}
+
+static inline struct vio_dev *to_vio_dev(struct device *dev)
+{
+	return container_of(dev, struct vio_dev, dev);
+}
+
+extern int vio_ldc_send(struct vio_driver_state *vio, void *data, int len);
+extern void vio_link_state_change(struct vio_driver_state *vio, int event);
+extern void vio_conn_reset(struct vio_driver_state *vio);
+extern int vio_control_pkt_engine(struct vio_driver_state *vio, void *pkt);
+extern int vio_validate_sid(struct vio_driver_state *vio,
+			    struct vio_msg_tag *tp);
+extern u32 vio_send_sid(struct vio_driver_state *vio);
+extern int vio_ldc_alloc(struct vio_driver_state *vio,
+			 struct ldc_channel_config *base_cfg, void *event_arg);
+extern void vio_ldc_free(struct vio_driver_state *vio);
+extern int vio_driver_init(struct vio_driver_state *vio, struct vio_dev *vdev,
+			   u8 dev_class, struct vio_version *ver_table,
+			   int ver_table_size, struct vio_driver_ops *ops,
+			   char *name);
+
+extern void vio_port_up(struct vio_driver_state *vio);
+
+#endif /* _SPARC64_VIO_H */
diff --git a/arch/sparc/include/asm/visasm.h b/arch/sparc/include/asm/visasm.h
new file mode 100644
index 0000000..de797b9
--- /dev/null
+++ b/arch/sparc/include/asm/visasm.h
@@ -0,0 +1,62 @@
+#ifndef _SPARC64_VISASM_H
+#define _SPARC64_VISASM_H
+
+/* visasm.h:  FPU saving macros for VIS routines
+ *
+ * Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz)
+ */
+
+#include <asm/pstate.h>
+#include <asm/ptrace.h>
+
+/* Clobbers %o5, %g1, %g2, %g3, %g7, %icc, %xcc */
+
+#define VISEntry					\
+	rd		%fprs, %o5;			\
+	andcc		%o5, (FPRS_FEF|FPRS_DU), %g0;	\
+	be,pt		%icc, 297f;			\
+	 sethi		%hi(297f), %g7;			\
+	sethi		%hi(VISenter), %g1;		\
+	jmpl		%g1 + %lo(VISenter), %g0;	\
+	 or		%g7, %lo(297f), %g7;		\
+297:	wr		%g0, FPRS_FEF, %fprs;		\
+
+#define VISExit						\
+	wr		%g0, 0, %fprs;
+
+/* Clobbers %o5, %g1, %g2, %g3, %g7, %icc, %xcc.
+ * Must preserve %o5 between VISEntryHalf and VISExitHalf */
+
+#define VISEntryHalf					\
+	rd		%fprs, %o5;			\
+	andcc		%o5, FPRS_FEF, %g0;		\
+	be,pt		%icc, 297f;			\
+	 sethi		%hi(298f), %g7;			\
+	sethi		%hi(VISenterhalf), %g1;		\
+	jmpl		%g1 + %lo(VISenterhalf), %g0;	\
+	 or		%g7, %lo(298f), %g7;		\
+	clr		%o5;				\
+297:	wr		%o5, FPRS_FEF, %fprs;		\
+298:
+
+#define VISExitHalf					\
+	wr		%o5, 0, %fprs;
+
+#ifndef __ASSEMBLY__
+static inline void save_and_clear_fpu(void) {
+	__asm__ __volatile__ (
+"		rd %%fprs, %%o5\n"
+"		andcc %%o5, %0, %%g0\n"
+"		be,pt %%icc, 299f\n"
+"		 sethi %%hi(298f), %%g7\n"
+"		sethi %%hi(VISenter), %%g1\n"
+"		jmpl %%g1 + %%lo(VISenter), %%g0\n"
+"		 or %%g7, %%lo(298f), %%g7\n"
+"	298:	wr %%g0, 0, %%fprs\n"
+"	299:\n"
+"		" : : "i" (FPRS_FEF|FPRS_DU) :
+		"o5", "g1", "g2", "g3", "g7", "cc");
+}
+#endif
+
+#endif /* _SPARC64_ASI_H */
diff --git a/arch/sparc/include/asm/watchdog.h b/arch/sparc/include/asm/watchdog.h
new file mode 100644
index 0000000..5baf2d3
--- /dev/null
+++ b/arch/sparc/include/asm/watchdog.h
@@ -0,0 +1,31 @@
+/*
+ *
+ * watchdog - Driver interface for the hardware watchdog timers
+ * present on Sun Microsystems boardsets
+ *
+ * Copyright (c) 2000 Eric Brower <ebrower@usa.net>
+ *
+ */
+
+#ifndef _SPARC64_WATCHDOG_H
+#define _SPARC64_WATCHDOG_H
+
+#include <linux/watchdog.h>
+
+/* Solaris compatibility ioctls--
+ * Ref. <linux/watchdog.h> for standard linux watchdog ioctls
+ */
+#define WIOCSTART _IO (WATCHDOG_IOCTL_BASE, 10)		/* Start Timer		*/
+#define WIOCSTOP  _IO (WATCHDOG_IOCTL_BASE, 11)		/* Stop Timer		*/
+#define WIOCGSTAT _IOR(WATCHDOG_IOCTL_BASE, 12, int)/* Get Timer Status	*/
+
+/* Status flags from WIOCGSTAT ioctl
+ */
+#define WD_FREERUN	0x01	/* timer is running, interrupts disabled	*/
+#define WD_EXPIRED	0x02	/* timer has expired						*/
+#define WD_RUNNING	0x04	/* timer is running, interrupts enabled		*/
+#define WD_STOPPED	0x08	/* timer has not been started				*/
+#define WD_SERVICED 0x10	/* timer interrupt was serviced				*/
+
+#endif /* ifndef _SPARC64_WATCHDOG_H */
+
diff --git a/arch/sparc/include/asm/winmacro.h b/arch/sparc/include/asm/winmacro.h
new file mode 100644
index 0000000..5b0a06d
--- /dev/null
+++ b/arch/sparc/include/asm/winmacro.h
@@ -0,0 +1,135 @@
+/*
+ * winmacro.h: Window loading-unloading macros.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_WINMACRO_H
+#define _SPARC_WINMACRO_H
+
+#include <asm/ptrace.h>
+
+/* Store the register window onto the 8-byte aligned area starting
+ * at %reg.  It might be %sp, it might not, we don't care.
+ */
+#define STORE_WINDOW(reg) \
+	std	%l0, [%reg + RW_L0]; \
+	std	%l2, [%reg + RW_L2]; \
+	std	%l4, [%reg + RW_L4]; \
+	std	%l6, [%reg + RW_L6]; \
+	std	%i0, [%reg + RW_I0]; \
+	std	%i2, [%reg + RW_I2]; \
+	std	%i4, [%reg + RW_I4]; \
+	std	%i6, [%reg + RW_I6];
+
+/* Load a register window from the area beginning at %reg. */
+#define LOAD_WINDOW(reg) \
+	ldd	[%reg + RW_L0], %l0; \
+	ldd	[%reg + RW_L2], %l2; \
+	ldd	[%reg + RW_L4], %l4; \
+	ldd	[%reg + RW_L6], %l6; \
+	ldd	[%reg + RW_I0], %i0; \
+	ldd	[%reg + RW_I2], %i2; \
+	ldd	[%reg + RW_I4], %i4; \
+	ldd	[%reg + RW_I6], %i6;
+
+/* Loading and storing struct pt_reg trap frames. */
+#define LOAD_PT_INS(base_reg) \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_I0], %i0; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_I2], %i2; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_I4], %i4; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_I6], %i6;
+
+#define LOAD_PT_GLOBALS(base_reg) \
+        ld      [%base_reg + STACKFRAME_SZ + PT_G1], %g1; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_G2], %g2; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_G4], %g4; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_G6], %g6;
+
+#define LOAD_PT_YREG(base_reg, scratch) \
+        ld      [%base_reg + STACKFRAME_SZ + PT_Y], %scratch; \
+        wr      %scratch, 0x0, %y;
+
+#define LOAD_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \
+        ld      [%base_reg + STACKFRAME_SZ + PT_PSR], %pt_psr; \
+        ld      [%base_reg + STACKFRAME_SZ + PT_PC], %pt_pc; \
+        ld      [%base_reg + STACKFRAME_SZ + PT_NPC], %pt_npc;
+
+#define LOAD_PT_ALL(base_reg, pt_psr, pt_pc, pt_npc, scratch) \
+        LOAD_PT_YREG(base_reg, scratch) \
+        LOAD_PT_INS(base_reg) \
+        LOAD_PT_GLOBALS(base_reg) \
+        LOAD_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc)
+
+#define STORE_PT_INS(base_reg) \
+        std     %i0, [%base_reg + STACKFRAME_SZ + PT_I0]; \
+        std     %i2, [%base_reg + STACKFRAME_SZ + PT_I2]; \
+        std     %i4, [%base_reg + STACKFRAME_SZ + PT_I4]; \
+        std     %i6, [%base_reg + STACKFRAME_SZ + PT_I6];
+
+#define STORE_PT_GLOBALS(base_reg) \
+        st      %g1, [%base_reg + STACKFRAME_SZ + PT_G1]; \
+        std     %g2, [%base_reg + STACKFRAME_SZ + PT_G2]; \
+        std     %g4, [%base_reg + STACKFRAME_SZ + PT_G4]; \
+        std     %g6, [%base_reg + STACKFRAME_SZ + PT_G6];
+
+#define STORE_PT_YREG(base_reg, scratch) \
+        rd      %y, %scratch; \
+        st      %scratch, [%base_reg + STACKFRAME_SZ + PT_Y];
+
+#define STORE_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \
+        st      %pt_psr, [%base_reg + STACKFRAME_SZ + PT_PSR]; \
+        st      %pt_pc,  [%base_reg + STACKFRAME_SZ + PT_PC]; \
+        st      %pt_npc, [%base_reg + STACKFRAME_SZ + PT_NPC];
+
+#define STORE_PT_ALL(base_reg, reg_psr, reg_pc, reg_npc, g_scratch) \
+        STORE_PT_PRIV(base_reg, reg_psr, reg_pc, reg_npc) \
+        STORE_PT_GLOBALS(base_reg) \
+        STORE_PT_YREG(base_reg, g_scratch) \
+        STORE_PT_INS(base_reg)
+
+#define SAVE_BOLIXED_USER_STACK(cur_reg, scratch) \
+        ld       [%cur_reg + TI_W_SAVED], %scratch; \
+        sll      %scratch, 2, %scratch; \
+        add      %scratch, %cur_reg, %scratch; \
+        st       %sp, [%scratch + TI_RWIN_SPTRS]; \
+        sub      %scratch, %cur_reg, %scratch; \
+        sll      %scratch, 4, %scratch; \
+        add      %scratch, %cur_reg, %scratch; \
+        STORE_WINDOW(scratch + TI_REG_WINDOW); \
+        sub      %scratch, %cur_reg, %scratch; \
+        srl      %scratch, 6, %scratch; \
+        add      %scratch, 1, %scratch; \
+        st       %scratch, [%cur_reg + TI_W_SAVED];
+
+#ifdef CONFIG_SMP
+#define LOAD_CURRENT4M(dest_reg, idreg) \
+        rd       %tbr, %idreg; \
+	sethi    %hi(current_set), %dest_reg; \
+        srl      %idreg, 10, %idreg; \
+	or       %dest_reg, %lo(current_set), %dest_reg; \
+	and      %idreg, 0xc, %idreg; \
+	ld       [%idreg + %dest_reg], %dest_reg;
+
+#define LOAD_CURRENT4D(dest_reg, idreg) \
+	lda	 [%g0] ASI_M_VIKING_TMP1, %idreg; \
+	sethi	%hi(C_LABEL(current_set)), %dest_reg; \
+	sll	%idreg, 2, %idreg; \
+	or	%dest_reg, %lo(C_LABEL(current_set)), %dest_reg; \
+	ld	[%idreg + %dest_reg], %dest_reg;
+
+/* Blackbox - take care with this... - check smp4m and smp4d before changing this. */
+#define LOAD_CURRENT(dest_reg, idreg) 					\
+	sethi	 %hi(___b_load_current), %idreg;			\
+	sethi    %hi(current_set), %dest_reg; 			\
+	sethi    %hi(boot_cpu_id4), %idreg; 			\
+	or       %dest_reg, %lo(current_set), %dest_reg; 	\
+	ldub	 [%idreg + %lo(boot_cpu_id4)], %idreg;		\
+	ld       [%idreg + %dest_reg], %dest_reg;
+#else
+#define LOAD_CURRENT(dest_reg, idreg) \
+        sethi    %hi(current_set), %idreg; \
+        ld       [%idreg + %lo(current_set)], %dest_reg;
+#endif
+
+#endif /* !(_SPARC_WINMACRO_H) */
diff --git a/arch/sparc/include/asm/xor.h b/arch/sparc/include/asm/xor.h
new file mode 100644
index 0000000..8ed591c
--- /dev/null
+++ b/arch/sparc/include/asm/xor.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_XOR_H
+#define ___ASM_SPARC_XOR_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/xor_64.h>
+#else
+#include <asm/xor_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/xor_32.h b/arch/sparc/include/asm/xor_32.h
new file mode 100644
index 0000000..44bfa07
--- /dev/null
+++ b/arch/sparc/include/asm/xor_32.h
@@ -0,0 +1,269 @@
+/*
+ * include/asm/xor.h
+ *
+ * Optimized RAID-5 checksumming functions for 32-bit Sparc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * High speed xor_block operation for RAID4/5 utilizing the
+ * ldd/std SPARC instructions.
+ *
+ * Copyright (C) 1999 Jakub Jelinek (jj@ultra.linux.cz)
+ */
+
+static void
+sparc_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	int lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		__asm__ __volatile__(
+		  "ldd [%0 + 0x00], %%g2\n\t"
+		  "ldd [%0 + 0x08], %%g4\n\t"
+		  "ldd [%0 + 0x10], %%o0\n\t"
+		  "ldd [%0 + 0x18], %%o2\n\t"
+		  "ldd [%1 + 0x00], %%o4\n\t"
+		  "ldd [%1 + 0x08], %%l0\n\t"
+		  "ldd [%1 + 0x10], %%l2\n\t"
+		  "ldd [%1 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "std %%g2, [%0 + 0x00]\n\t"
+		  "std %%g4, [%0 + 0x08]\n\t"
+		  "std %%o0, [%0 + 0x10]\n\t"
+		  "std %%o2, [%0 + 0x18]\n"
+		:
+		: "r" (p1), "r" (p2)
+		: "g2", "g3", "g4", "g5",
+		  "o0", "o1", "o2", "o3", "o4", "o5",
+		  "l0", "l1", "l2", "l3", "l4", "l5");
+		p1 += 8;
+		p2 += 8;
+	} while (--lines > 0);
+}
+
+static void
+sparc_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	unsigned long *p3)
+{
+	int lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		__asm__ __volatile__(
+		  "ldd [%0 + 0x00], %%g2\n\t"
+		  "ldd [%0 + 0x08], %%g4\n\t"
+		  "ldd [%0 + 0x10], %%o0\n\t"
+		  "ldd [%0 + 0x18], %%o2\n\t"
+		  "ldd [%1 + 0x00], %%o4\n\t"
+		  "ldd [%1 + 0x08], %%l0\n\t"
+		  "ldd [%1 + 0x10], %%l2\n\t"
+		  "ldd [%1 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "ldd [%2 + 0x00], %%o4\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "ldd [%2 + 0x08], %%l0\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "ldd [%2 + 0x10], %%l2\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "ldd [%2 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "std %%g2, [%0 + 0x00]\n\t"
+		  "std %%g4, [%0 + 0x08]\n\t"
+		  "std %%o0, [%0 + 0x10]\n\t"
+		  "std %%o2, [%0 + 0x18]\n"
+		:
+		: "r" (p1), "r" (p2), "r" (p3)
+		: "g2", "g3", "g4", "g5",
+		  "o0", "o1", "o2", "o3", "o4", "o5",
+		  "l0", "l1", "l2", "l3", "l4", "l5");
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+	} while (--lines > 0);
+}
+
+static void
+sparc_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	unsigned long *p3, unsigned long *p4)
+{
+	int lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		__asm__ __volatile__(
+		  "ldd [%0 + 0x00], %%g2\n\t"
+		  "ldd [%0 + 0x08], %%g4\n\t"
+		  "ldd [%0 + 0x10], %%o0\n\t"
+		  "ldd [%0 + 0x18], %%o2\n\t"
+		  "ldd [%1 + 0x00], %%o4\n\t"
+		  "ldd [%1 + 0x08], %%l0\n\t"
+		  "ldd [%1 + 0x10], %%l2\n\t"
+		  "ldd [%1 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "ldd [%2 + 0x00], %%o4\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "ldd [%2 + 0x08], %%l0\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "ldd [%2 + 0x10], %%l2\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "ldd [%2 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "ldd [%3 + 0x00], %%o4\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "ldd [%3 + 0x08], %%l0\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "ldd [%3 + 0x10], %%l2\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "ldd [%3 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "std %%g2, [%0 + 0x00]\n\t"
+		  "std %%g4, [%0 + 0x08]\n\t"
+		  "std %%o0, [%0 + 0x10]\n\t"
+		  "std %%o2, [%0 + 0x18]\n"
+		:
+		: "r" (p1), "r" (p2), "r" (p3), "r" (p4)
+		: "g2", "g3", "g4", "g5",
+		  "o0", "o1", "o2", "o3", "o4", "o5",
+		  "l0", "l1", "l2", "l3", "l4", "l5");
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+		p4 += 8;
+	} while (--lines > 0);
+}
+
+static void
+sparc_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	int lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		__asm__ __volatile__(
+		  "ldd [%0 + 0x00], %%g2\n\t"
+		  "ldd [%0 + 0x08], %%g4\n\t"
+		  "ldd [%0 + 0x10], %%o0\n\t"
+		  "ldd [%0 + 0x18], %%o2\n\t"
+		  "ldd [%1 + 0x00], %%o4\n\t"
+		  "ldd [%1 + 0x08], %%l0\n\t"
+		  "ldd [%1 + 0x10], %%l2\n\t"
+		  "ldd [%1 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "ldd [%2 + 0x00], %%o4\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "ldd [%2 + 0x08], %%l0\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "ldd [%2 + 0x10], %%l2\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "ldd [%2 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "ldd [%3 + 0x00], %%o4\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "ldd [%3 + 0x08], %%l0\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "ldd [%3 + 0x10], %%l2\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "ldd [%3 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "ldd [%4 + 0x00], %%o4\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "ldd [%4 + 0x08], %%l0\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "ldd [%4 + 0x10], %%l2\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "ldd [%4 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "std %%g2, [%0 + 0x00]\n\t"
+		  "std %%g4, [%0 + 0x08]\n\t"
+		  "std %%o0, [%0 + 0x10]\n\t"
+		  "std %%o2, [%0 + 0x18]\n"
+		:
+		: "r" (p1), "r" (p2), "r" (p3), "r" (p4), "r" (p5)
+		: "g2", "g3", "g4", "g5",
+		  "o0", "o1", "o2", "o3", "o4", "o5",
+		  "l0", "l1", "l2", "l3", "l4", "l5");
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+		p4 += 8;
+		p5 += 8;
+	} while (--lines > 0);
+}
+
+static struct xor_block_template xor_block_SPARC = {
+	.name	= "SPARC",
+	.do_2	= sparc_2,
+	.do_3	= sparc_3,
+	.do_4	= sparc_4,
+	.do_5	= sparc_5,
+};
+
+/* For grins, also test the generic routines.  */
+#include <asm-generic/xor.h>
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES				\
+	do {						\
+		xor_speed(&xor_block_8regs);		\
+		xor_speed(&xor_block_32regs);		\
+		xor_speed(&xor_block_SPARC);		\
+	} while (0)
diff --git a/arch/sparc/include/asm/xor_64.h b/arch/sparc/include/asm/xor_64.h
new file mode 100644
index 0000000..bee4bf4
--- /dev/null
+++ b/arch/sparc/include/asm/xor_64.h
@@ -0,0 +1,70 @@
+/*
+ * include/asm/xor.h
+ *
+ * High speed xor_block operation for RAID4/5 utilizing the
+ * UltraSparc Visual Instruction Set and Niagara block-init
+ * twin-load instructions.
+ *
+ * Copyright (C) 1997, 1999 Jakub Jelinek (jj@ultra.linux.cz)
+ * Copyright (C) 2006 David S. Miller <davem@davemloft.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <asm/spitfire.h>
+
+extern void xor_vis_2(unsigned long, unsigned long *, unsigned long *);
+extern void xor_vis_3(unsigned long, unsigned long *, unsigned long *,
+		      unsigned long *);
+extern void xor_vis_4(unsigned long, unsigned long *, unsigned long *,
+		      unsigned long *, unsigned long *);
+extern void xor_vis_5(unsigned long, unsigned long *, unsigned long *,
+		      unsigned long *, unsigned long *, unsigned long *);
+
+/* XXX Ugh, write cheetah versions... -DaveM */
+
+static struct xor_block_template xor_block_VIS = {
+        .name	= "VIS",
+        .do_2	= xor_vis_2,
+        .do_3	= xor_vis_3,
+        .do_4	= xor_vis_4,
+        .do_5	= xor_vis_5,
+};
+
+extern void xor_niagara_2(unsigned long, unsigned long *, unsigned long *);
+extern void xor_niagara_3(unsigned long, unsigned long *, unsigned long *,
+			  unsigned long *);
+extern void xor_niagara_4(unsigned long, unsigned long *, unsigned long *,
+			  unsigned long *, unsigned long *);
+extern void xor_niagara_5(unsigned long, unsigned long *, unsigned long *,
+			  unsigned long *, unsigned long *, unsigned long *);
+
+static struct xor_block_template xor_block_niagara = {
+        .name	= "Niagara",
+        .do_2	= xor_niagara_2,
+        .do_3	= xor_niagara_3,
+        .do_4	= xor_niagara_4,
+        .do_5	= xor_niagara_5,
+};
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES				\
+	do {						\
+		xor_speed(&xor_block_VIS);		\
+		xor_speed(&xor_block_niagara);		\
+	} while (0)
+
+/* For VIS for everything except Niagara.  */
+#define XOR_SELECT_TEMPLATE(FASTEST) \
+	((tlb_type == hypervisor && \
+	  (sun4v_chip_type == SUN4V_CHIP_NIAGARA1 || \
+	   sun4v_chip_type == SUN4V_CHIP_NIAGARA2)) ? \
+	 &xor_block_niagara : \
+	 &xor_block_VIS)
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index 2f96256..e8cdf71 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -1196,8 +1196,9 @@ sys_rt_sigreturn:
 	be	1f
 	 nop
 
+	add	%sp, STACKFRAME_SZ, %o0
 	call	syscall_trace
-	 nop
+	 mov	1, %o1
 
 1:
 	/* We are returning to a signal handler. */
@@ -1287,8 +1288,12 @@ linux_fast_syscall:
 	 mov	%i3, %o3
 
 linux_syscall_trace:
+	add	%sp, STACKFRAME_SZ, %o0
 	call	syscall_trace
-	 nop
+	 mov	0, %o1
+	cmp	%o0, 0
+	bne	3f
+	 mov	-ENOSYS, %o0
 	mov	%i0, %o0
 	mov	%i1, %o1
 	mov	%i2, %o2
@@ -1337,6 +1342,7 @@ syscall_is_too_hard:
 	call	%l7
 	 mov	%i5, %o5
 
+3:
 	st	%o0, [%sp + STACKFRAME_SZ + PT_I0]
 
 ret_sys_call:
@@ -1374,6 +1380,8 @@ ret_sys_call:
 	 st	%l2, [%sp + STACKFRAME_SZ + PT_NPC]
 
 linux_syscall_trace2:
+	add	%sp, STACKFRAME_SZ, %o0
+	mov	1, %o1
 	call	syscall_trace
 	 add	%l1, 0x4, %l2			/* npc = npc+4 */
 	st	%l1, [%sp + STACKFRAME_SZ + PT_PC]
diff --git a/arch/sparc/kernel/ptrace.c b/arch/sparc/kernel/ptrace.c
index 81f3b92..20699c7 100644
--- a/arch/sparc/kernel/ptrace.c
+++ b/arch/sparc/kernel/ptrace.c
@@ -21,6 +21,7 @@
 #include <linux/signal.h>
 #include <linux/regset.h>
 #include <linux/elf.h>
+#include <linux/tracehook.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -450,21 +451,16 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return ret;
 }
 
-asmlinkage void syscall_trace(void)
+asmlinkage int syscall_trace(struct pt_regs *regs, int syscall_exit_p)
 {
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return;
-	if (!(current->ptrace & PT_PTRACED))
-		return;
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig (current->exit_code, current, 1);
-		current->exit_code = 0;
+	int ret = 0;
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
+		if (syscall_exit_p)
+			tracehook_report_syscall_exit(regs, 0);
+		else
+			ret = tracehook_report_syscall_entry(regs);
 	}
+
+	return ret;
 }
diff --git a/arch/sparc/kernel/rtrap.S b/arch/sparc/kernel/rtrap.S
index 891f460..4da2e1f 100644
--- a/arch/sparc/kernel/rtrap.S
+++ b/arch/sparc/kernel/rtrap.S
@@ -69,12 +69,13 @@ ret_trap_lockless_ipi:
 
 	ld	[%curptr + TI_FLAGS], %g2
 signal_p:
-	andcc	%g2, (_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK), %g0
+	andcc	%g2, _TIF_DO_NOTIFY_RESUME_MASK, %g0
 	bz,a	ret_trap_continue
 	 ld	[%sp + STACKFRAME_SZ + PT_PSR], %t_psr
 
+	mov	%g2, %o2
 	mov	%l5, %o1
-	call	do_signal
+	call	do_notify_resume
 	 add	%sp, STACKFRAME_SZ, %o0	! pt_regs ptr
 
 	/* Fall through. */
diff --git a/arch/sparc/kernel/signal.c b/arch/sparc/kernel/signal.c
index 3fd1df9..c94f91c 100644
--- a/arch/sparc/kernel/signal.c
+++ b/arch/sparc/kernel/signal.c
@@ -18,6 +18,7 @@
 #include <linux/smp.h>
 #include <linux/binfmts.h>	/* do_coredum */
 #include <linux/bitops.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/ptrace.h>
@@ -513,7 +514,7 @@ static inline void syscall_restart(unsigned long orig_i0, struct pt_regs *regs,
  * want to handle. Thus you cannot kill init even with a SIGKILL even by
  * mistake.
  */
-asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0)
+static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
 {
 	struct k_sigaction ka;
 	int restart_syscall;
@@ -552,6 +553,8 @@ asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0)
 		 */
 		if (test_thread_flag(TIF_RESTORE_SIGMASK))
 			clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+		tracehook_signal_handler(signr, &info, &ka, regs, 0);
 		return;
 	}
 	if (restart_syscall &&
@@ -579,6 +582,17 @@ asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0)
 	}
 }
 
+void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0,
+		      unsigned long thread_info_flags)
+{
+	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+		do_signal(regs, orig_i0);
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
+}
+
 asmlinkage int
 do_sys_sigstack(struct sigstack __user *ssptr, struct sigstack __user *ossptr,
 		unsigned long sp)
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index 7c88263..923a989 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -17,6 +17,7 @@ config SPARC64
 	select HAVE_LMB
 	select HAVE_ARCH_KGDB
 	select USE_GENERIC_SMP_HELPERS if SMP
+	select HAVE_ARCH_TRACEHOOK
 
 config GENERIC_TIME
 	bool
diff --git a/arch/sparc64/kernel/compat_audit.c b/arch/sparc64/kernel/compat_audit.c
index c197948..c831b0a 100644
--- a/arch/sparc64/kernel/compat_audit.c
+++ b/arch/sparc64/kernel/compat_audit.c
@@ -1,4 +1,4 @@
-#include <asm-sparc/unistd.h>
+#include <asm/unistd_32.h>
 
 unsigned sparc32_dir_class[] = {
 #include <asm-generic/audit_dir_write.h>
diff --git a/arch/sparc64/kernel/entry.h b/arch/sparc64/kernel/entry.h
index 32fbab6..fc294a2 100644
--- a/arch/sparc64/kernel/entry.h
+++ b/arch/sparc64/kernel/entry.h
@@ -22,8 +22,7 @@ extern void do_notify_resume(struct pt_regs *regs,
 			     unsigned long orig_i0,
 			     unsigned long thread_info_flags);
 
-extern asmlinkage void syscall_trace(struct pt_regs *regs,
-				     int syscall_exit_p);
+extern asmlinkage int syscall_trace(struct pt_regs *regs, int syscall_exit_p);
 
 extern void bad_trap_tl1(struct pt_regs *regs, long lvl);
 
diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c
index f6c9fc9..bd578cc 100644
--- a/arch/sparc64/kernel/ptrace.c
+++ b/arch/sparc64/kernel/ptrace.c
@@ -23,6 +23,7 @@
 #include <linux/audit.h>
 #include <linux/signal.h>
 #include <linux/regset.h>
+#include <linux/tracehook.h>
 #include <linux/compat.h>
 #include <linux/elf.h>
 
@@ -1049,8 +1050,10 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return ret;
 }
 
-asmlinkage void syscall_trace(struct pt_regs *regs, int syscall_exit_p)
+asmlinkage int syscall_trace(struct pt_regs *regs, int syscall_exit_p)
 {
+	int ret = 0;
+
 	/* do the secure computing check first */
 	secure_computing(regs->u_regs[UREG_G1]);
 
@@ -1064,27 +1067,14 @@ asmlinkage void syscall_trace(struct pt_regs *regs, int syscall_exit_p)
 		audit_syscall_exit(result, regs->u_regs[UREG_I0]);
 	}
 
-	if (!(current->ptrace & PT_PTRACED))
-		goto out;
-
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		goto out;
-
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
+	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
+		if (syscall_exit_p)
+			tracehook_report_syscall_exit(regs, 0);
+		else
+			ret = tracehook_report_syscall_entry(regs);
 	}
 
-out:
-	if (unlikely(current->audit_context) && !syscall_exit_p)
+	if (unlikely(current->audit_context) && !syscall_exit_p && !ret)
 		audit_syscall_entry((test_thread_flag(TIF_32BIT) ?
 				     AUDIT_ARCH_SPARC :
 				     AUDIT_ARCH_SPARC64),
@@ -1093,4 +1083,6 @@ out:
 				    regs->u_regs[UREG_I1],
 				    regs->u_regs[UREG_I2],
 				    regs->u_regs[UREG_I3]);
+
+	return ret;
 }
diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S
index c6fc695..97a993c 100644
--- a/arch/sparc64/kernel/rtrap.S
+++ b/arch/sparc64/kernel/rtrap.S
@@ -46,7 +46,7 @@ __handle_user_windows:
 		wrpr			%g0, RTRAP_PSTATE_IRQOFF, %pstate
 		ldx			[%g6 + TI_FLAGS], %l0
 
-1:		andcc			%l0, _TIF_SIGPENDING, %g0
+1:		andcc			%l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0
 		be,pt			%xcc, __handle_user_windows_continue
 		 nop
 		mov			%l5, %o1
@@ -86,7 +86,7 @@ __handle_perfctrs:
 		 wrpr			%g0, RTRAP_PSTATE, %pstate
 		wrpr			%g0, RTRAP_PSTATE_IRQOFF, %pstate
 		ldx			[%g6 + TI_FLAGS], %l0
-1:		andcc			%l0, _TIF_SIGPENDING, %g0
+1:		andcc			%l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0
 
 		be,pt			%xcc, __handle_perfctrs_continue
 		 sethi			%hi(TSTATE_PEF), %o0
@@ -195,7 +195,7 @@ __handle_preemption_continue:
 		 andcc			%l1, %o0, %g0
 		andcc			%l0, _TIF_NEED_RESCHED, %g0
 		bne,pn			%xcc, __handle_preemption
-		 andcc			%l0, _TIF_SIGPENDING, %g0
+		 andcc			%l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0
 		bne,pn			%xcc, __handle_signal
 __handle_signal_continue:
 		 ldub			[%g6 + TI_WSAVED], %o2
diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c
index 9667e96..d1b8445 100644
--- a/arch/sparc64/kernel/signal.c
+++ b/arch/sparc64/kernel/signal.c
@@ -17,11 +17,13 @@
 #include <linux/errno.h>
 #include <linux/wait.h>
 #include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/unistd.h>
 #include <linux/mm.h>
 #include <linux/tty.h>
 #include <linux/binfmts.h>
 #include <linux/bitops.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/ptrace.h>
@@ -574,6 +576,8 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
 		 * clear the TS_RESTORE_SIGMASK flag.
 		 */
 		current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+
+		tracehook_signal_handler(signr, &info, &ka, regs, 0);
 		return;
 	}
 	if (restart_syscall &&
@@ -605,4 +609,8 @@ void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0, unsigned long
 {
 	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(regs, orig_i0);
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
 }
diff --git a/arch/sparc64/kernel/signal32.c b/arch/sparc64/kernel/signal32.c
index 97cdd1b..ba5b09a 100644
--- a/arch/sparc64/kernel/signal32.c
+++ b/arch/sparc64/kernel/signal32.c
@@ -19,6 +19,7 @@
 #include <linux/binfmts.h>
 #include <linux/compat.h>
 #include <linux/bitops.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/ptrace.h>
@@ -794,6 +795,8 @@ void do_signal32(sigset_t *oldset, struct pt_regs * regs,
 		 * clear the TS_RESTORE_SIGMASK flag.
 		 */
 		current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+
+		tracehook_signal_handler(signr, &info, &ka, regs, 0);
 		return;
 	}
 	if (restart_syscall &&
diff --git a/arch/sparc64/kernel/syscalls.S b/arch/sparc64/kernel/syscalls.S
index db19ed6..a2f2427 100644
--- a/arch/sparc64/kernel/syscalls.S
+++ b/arch/sparc64/kernel/syscalls.S
@@ -162,6 +162,8 @@ linux_syscall_trace32:
 	add	%sp, PTREGS_OFF, %o0
 	call	syscall_trace
 	 clr	%o1
+	brnz,pn	%o0, 3f
+	 mov	-ENOSYS, %o0
 	srl	%i0, 0, %o0
 	srl	%i4, 0, %o4
 	srl	%i1, 0, %o1
@@ -173,6 +175,8 @@ linux_syscall_trace:
 	add	%sp, PTREGS_OFF, %o0
 	call	syscall_trace
 	 clr	%o1
+	brnz,pn	%o0, 3f
+	 mov	-ENOSYS, %o0
 	mov	%i0, %o0
 	mov	%i1, %o1
 	mov	%i2, %o2
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 7bb4617..0e5bf1e 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -30,6 +30,7 @@ config X86
 	select HAVE_FTRACE
 	select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
 	select HAVE_ARCH_KGDB if !X86_VOYAGER
+	select HAVE_GENERIC_DMA_COHERENT if X86_32
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS
 
 config ARCH_DEFCONFIG
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index 9220cf4..c2502eb 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -73,7 +73,6 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 
 	cpumask_t saved_mask;
-	cpumask_of_cpu_ptr(new_mask, cpu);
 	int retval;
 	unsigned int eax, ebx, ecx, edx;
 	unsigned int edx_part;
@@ -92,7 +91,7 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
 
 	/* Make sure we are running on right CPU */
 	saved_mask = current->cpus_allowed;
-	retval = set_cpus_allowed_ptr(current, new_mask);
+	retval = set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 	if (retval)
 		return -1;
 
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 7469740..22d7d05 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -29,9 +29,6 @@
 
 #define CMD_SET_TYPE(cmd, t) ((cmd)->data[1] |= ((t) << 28))
 
-#define to_pages(addr, size) \
-	 (round_up(((addr) & ~PAGE_MASK) + (size), PAGE_SIZE) >> PAGE_SHIFT)
-
 #define EXIT_LOOP_COUNT 10000000
 
 static DEFINE_RWLOCK(amd_iommu_devtable_lock);
@@ -185,7 +182,7 @@ static int iommu_flush_pages(struct amd_iommu *iommu, u16 domid,
 		u64 address, size_t size)
 {
 	int s = 0;
-	unsigned pages = to_pages(address, size);
+	unsigned pages = iommu_num_pages(address, size);
 
 	address &= PAGE_MASK;
 
@@ -557,8 +554,8 @@ static struct dma_ops_domain *dma_ops_domain_alloc(struct amd_iommu *iommu,
 	if (iommu->exclusion_start &&
 	    iommu->exclusion_start < dma_dom->aperture_size) {
 		unsigned long startpage = iommu->exclusion_start >> PAGE_SHIFT;
-		int pages = to_pages(iommu->exclusion_start,
-				iommu->exclusion_length);
+		int pages = iommu_num_pages(iommu->exclusion_start,
+					    iommu->exclusion_length);
 		dma_ops_reserve_addresses(dma_dom, startpage, pages);
 	}
 
@@ -767,7 +764,7 @@ static dma_addr_t __map_single(struct device *dev,
 	unsigned int pages;
 	int i;
 
-	pages = to_pages(paddr, size);
+	pages = iommu_num_pages(paddr, size);
 	paddr &= PAGE_MASK;
 
 	address = dma_ops_alloc_addresses(dev, dma_dom, pages);
@@ -802,7 +799,7 @@ static void __unmap_single(struct amd_iommu *iommu,
 	if ((dma_addr == 0) || (dma_addr + size > dma_dom->aperture_size))
 		return;
 
-	pages = to_pages(dma_addr, size);
+	pages = iommu_num_pages(dma_addr, size);
 	dma_addr &= PAGE_MASK;
 	start = dma_addr;
 
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index ff2fff5..dd097b8 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -200,12 +200,10 @@ static void drv_read(struct drv_cmd *cmd)
 static void drv_write(struct drv_cmd *cmd)
 {
 	cpumask_t saved_mask = current->cpus_allowed;
-	cpumask_of_cpu_ptr_declare(cpu_mask);
 	unsigned int i;
 
 	for_each_cpu_mask_nr(i, cmd->mask) {
-		cpumask_of_cpu_ptr_next(cpu_mask, i);
-		set_cpus_allowed_ptr(current, cpu_mask);
+		set_cpus_allowed_ptr(current, &cpumask_of_cpu(i));
 		do_drv_write(cmd);
 	}
 
@@ -269,12 +267,11 @@ static unsigned int get_measured_perf(unsigned int cpu)
 	} aperf_cur, mperf_cur;
 
 	cpumask_t saved_mask;
-	cpumask_of_cpu_ptr(cpu_mask, cpu);
 	unsigned int perf_percent;
 	unsigned int retval;
 
 	saved_mask = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, cpu_mask);
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 	if (get_cpu() != cpu) {
 		/* We were not able to run on requested processor */
 		put_cpu();
@@ -340,7 +337,6 @@ static unsigned int get_measured_perf(unsigned int cpu)
 
 static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
 {
-	cpumask_of_cpu_ptr(cpu_mask, cpu);
 	struct acpi_cpufreq_data *data = per_cpu(drv_data, cpu);
 	unsigned int freq;
 	unsigned int cached_freq;
@@ -353,7 +349,7 @@ static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
 	}
 
 	cached_freq = data->freq_table[data->acpi_data->state].frequency;
-	freq = extract_freq(get_cur_val(cpu_mask), data);
+	freq = extract_freq(get_cur_val(&cpumask_of_cpu(cpu)), data);
 	if (freq != cached_freq) {
 		/*
 		 * The dreaded BIOS frequency change behind our back.
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 53c7b69..c45ca6d 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -479,12 +479,11 @@ static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvi
 static int check_supported_cpu(unsigned int cpu)
 {
 	cpumask_t oldmask;
-	cpumask_of_cpu_ptr(cpu_mask, cpu);
 	u32 eax, ebx, ecx, edx;
 	unsigned int rc = 0;
 
 	oldmask = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, cpu_mask);
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 
 	if (smp_processor_id() != cpu) {
 		printk(KERN_ERR PFX "limiting to cpu %u failed\n", cpu);
@@ -1017,7 +1016,6 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i
 static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsigned relation)
 {
 	cpumask_t oldmask;
-	cpumask_of_cpu_ptr(cpu_mask, pol->cpu);
 	struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
 	u32 checkfid;
 	u32 checkvid;
@@ -1032,7 +1030,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
 
 	/* only run on specific CPU from here on */
 	oldmask = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, cpu_mask);
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(pol->cpu));
 
 	if (smp_processor_id() != pol->cpu) {
 		printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
@@ -1107,7 +1105,6 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 {
 	struct powernow_k8_data *data;
 	cpumask_t oldmask;
-	cpumask_of_cpu_ptr_declare(newmask);
 	int rc;
 
 	if (!cpu_online(pol->cpu))
@@ -1159,8 +1156,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 
 	/* only run on specific CPU from here on */
 	oldmask = current->cpus_allowed;
-	cpumask_of_cpu_ptr_next(newmask, pol->cpu);
-	set_cpus_allowed_ptr(current, newmask);
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(pol->cpu));
 
 	if (smp_processor_id() != pol->cpu) {
 		printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
@@ -1182,7 +1178,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 	set_cpus_allowed_ptr(current, &oldmask);
 
 	if (cpu_family == CPU_HW_PSTATE)
-		pol->cpus = *newmask;
+		pol->cpus = cpumask_of_cpu(pol->cpu);
 	else
 		pol->cpus = per_cpu(cpu_core_map, pol->cpu);
 	data->available_cores = &(pol->cpus);
@@ -1248,7 +1244,6 @@ static unsigned int powernowk8_get (unsigned int cpu)
 {
 	struct powernow_k8_data *data;
 	cpumask_t oldmask = current->cpus_allowed;
-	cpumask_of_cpu_ptr(newmask, cpu);
 	unsigned int khz = 0;
 	unsigned int first;
 
@@ -1258,7 +1253,7 @@ static unsigned int powernowk8_get (unsigned int cpu)
 	if (!data)
 		return -EINVAL;
 
-	set_cpus_allowed_ptr(current, newmask);
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 	if (smp_processor_id() != cpu) {
 		printk(KERN_ERR PFX
 			"limiting to CPU %d failed in powernowk8_get\n", cpu);
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
index ca2ac13..15e13c0 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -324,10 +324,9 @@ static unsigned int get_cur_freq(unsigned int cpu)
 	unsigned l, h;
 	unsigned clock_freq;
 	cpumask_t saved_mask;
-	cpumask_of_cpu_ptr(new_mask, cpu);
 
 	saved_mask = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, new_mask);
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 	if (smp_processor_id() != cpu)
 		return 0;
 
@@ -585,15 +584,12 @@ static int centrino_target (struct cpufreq_policy *policy,
 		 * Best effort undo..
 		 */
 
-		if (!cpus_empty(*covered_cpus)) {
-			cpumask_of_cpu_ptr_declare(new_mask);
-
+		if (!cpus_empty(*covered_cpus))
 			for_each_cpu_mask_nr(j, *covered_cpus) {
-				cpumask_of_cpu_ptr_next(new_mask, j);
-				set_cpus_allowed_ptr(current, new_mask);
+				set_cpus_allowed_ptr(current,
+						     &cpumask_of_cpu(j));
 				wrmsr(MSR_IA32_PERF_CTL, oldmsr, h);
 			}
-		}
 
 		tmp = freqs.new;
 		freqs.new = freqs.old;
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
index 2f3728d..191f726 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
@@ -244,8 +244,7 @@ static unsigned int _speedstep_get(const cpumask_t *cpus)
 
 static unsigned int speedstep_get(unsigned int cpu)
 {
-	cpumask_of_cpu_ptr(newmask, cpu);
-	return _speedstep_get(newmask);
+	return _speedstep_get(&cpumask_of_cpu(cpu));
 }
 
 /**
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 650d40f..6b0a10b 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -516,7 +516,6 @@ static int __cpuinit detect_cache_attributes(unsigned int cpu)
 	unsigned long		j;
 	int			retval;
 	cpumask_t		oldmask;
-	cpumask_of_cpu_ptr(newmask, cpu);
 
 	if (num_cache_leaves == 0)
 		return -ENOENT;
@@ -527,7 +526,7 @@ static int __cpuinit detect_cache_attributes(unsigned int cpu)
 		return -ENOMEM;
 
 	oldmask = current->cpus_allowed;
-	retval = set_cpus_allowed_ptr(current, newmask);
+	retval = set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 	if (retval)
 		goto out;
 
diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c
index 3fee2aa..b68e21f 100644
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -62,12 +62,10 @@ static int alloc_ldt(mm_context_t *pc, int mincount, int reload)
 
 	if (reload) {
 #ifdef CONFIG_SMP
-		cpumask_of_cpu_ptr_declare(mask);
-
 		preempt_disable();
 		load_LDT(pc);
-		cpumask_of_cpu_ptr_next(mask, smp_processor_id());
-		if (!cpus_equal(current->mm->cpu_vm_mask, *mask))
+		if (!cpus_equal(current->mm->cpu_vm_mask,
+				cpumask_of_cpu(smp_processor_id())))
 			smp_call_function(flush_ldt, current->mm, 1);
 		preempt_enable();
 #else
diff --git a/arch/x86/kernel/microcode.c b/arch/x86/kernel/microcode.c
index 758b958..28dba1a 100644
--- a/arch/x86/kernel/microcode.c
+++ b/arch/x86/kernel/microcode.c
@@ -123,7 +123,6 @@ static int do_microcode_update (void)
 	void *new_mc = NULL;
 	int cpu;
 	cpumask_t old;
-	cpumask_of_cpu_ptr_declare(newmask);
 
 	old = current->cpus_allowed;
 
@@ -140,8 +139,7 @@ static int do_microcode_update (void)
 
 			if (!uci->valid)
 				continue;
-			cpumask_of_cpu_ptr_next(newmask, cpu);
-			set_cpus_allowed_ptr(current, newmask);
+			set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 			error = microcode_ops->get_matching_microcode(new_mc,
 								      cpu);
 			if (error < 0)
@@ -236,12 +234,11 @@ EXPORT_SYMBOL_GPL(microcode_pdev);
 static void microcode_init_cpu(int cpu, int resume)
 {
 	cpumask_t old;
-	cpumask_of_cpu_ptr(newmask, cpu);
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 
 	old = current->cpus_allowed;
 
-	set_cpus_allowed_ptr(current, newmask);
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 	mutex_lock(&microcode_mutex);
 	microcode_ops->collect_cpu_info(cpu);
 	if (uci->valid && system_state == SYSTEM_RUNNING && !resume)
@@ -263,13 +260,10 @@ static ssize_t reload_store(struct sys_device *dev,
 	if (end == buf)
 		return -EINVAL;
 	if (val == 1) {
-		cpumask_t old;
-		cpumask_of_cpu_ptr(newmask, cpu);
-
-		old = current->cpus_allowed;
+		cpumask_t old = current->cpus_allowed;
 
 		get_online_cpus();
-		set_cpus_allowed_ptr(current, newmask);
+		set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 
 		mutex_lock(&microcode_mutex);
 		if (uci->valid)
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index fd9e68e..07e52be 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -445,7 +445,6 @@ static int apply_microcode_check_cpu_amd(int cpu)
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 	unsigned int rev;
 	cpumask_t old;
-	cpumask_of_cpu_ptr(newmask, cpu);
 	int err = 0;
 
 	/* Check if the microcode is available */
@@ -453,7 +452,7 @@ static int apply_microcode_check_cpu_amd(int cpu)
 		return 0;
 
 	old = current->cpus_allowed;
-	set_cpus_allowed(current, newmask);
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 
 	/* Check if the microcode we have in memory matches the CPU */
 	if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 16)
diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c
index 831db53..6da4a85 100644
--- a/arch/x86/kernel/microcode_intel.c
+++ b/arch/x86/kernel/microcode_intel.c
@@ -461,7 +461,6 @@ static int apply_microcode_check_cpu(int cpu)
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 	cpumask_t old;
-	cpumask_of_cpu_ptr(newmask, cpu);
 	unsigned int val[2];
 	int err = 0;
 
@@ -470,7 +469,7 @@ static int apply_microcode_check_cpu(int cpu)
 		return 0;
 
 	old = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, newmask);
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 
 	/* Check if the microcode we have in memory matches the CPU */
 	if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 3754412..8dbffb8 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -192,124 +192,6 @@ static __init int iommu_setup(char *p)
 }
 early_param("iommu", iommu_setup);
 
-#ifdef CONFIG_X86_32
-int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-				dma_addr_t device_addr, size_t size, int flags)
-{
-	void __iomem *mem_base = NULL;
-	int pages = size >> PAGE_SHIFT;
-	int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
-
-	if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0)
-		goto out;
-	if (!size)
-		goto out;
-	if (dev->dma_mem)
-		goto out;
-
-	/* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */
-
-	mem_base = ioremap(bus_addr, size);
-	if (!mem_base)
-		goto out;
-
-	dev->dma_mem = kzalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
-	if (!dev->dma_mem)
-		goto out;
-	dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
-	if (!dev->dma_mem->bitmap)
-		goto free1_out;
-
-	dev->dma_mem->virt_base = mem_base;
-	dev->dma_mem->device_base = device_addr;
-	dev->dma_mem->size = pages;
-	dev->dma_mem->flags = flags;
-
-	if (flags & DMA_MEMORY_MAP)
-		return DMA_MEMORY_MAP;
-
-	return DMA_MEMORY_IO;
-
- free1_out:
-	kfree(dev->dma_mem);
- out:
-	if (mem_base)
-		iounmap(mem_base);
-	return 0;
-}
-EXPORT_SYMBOL(dma_declare_coherent_memory);
-
-void dma_release_declared_memory(struct device *dev)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-
-	if (!mem)
-		return;
-	dev->dma_mem = NULL;
-	iounmap(mem->virt_base);
-	kfree(mem->bitmap);
-	kfree(mem);
-}
-EXPORT_SYMBOL(dma_release_declared_memory);
-
-void *dma_mark_declared_memory_occupied(struct device *dev,
-					dma_addr_t device_addr, size_t size)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-	int pos, err;
-	int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1);
-
-	pages >>= PAGE_SHIFT;
-
-	if (!mem)
-		return ERR_PTR(-EINVAL);
-
-	pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
-	err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages));
-	if (err != 0)
-		return ERR_PTR(err);
-	return mem->virt_base + (pos << PAGE_SHIFT);
-}
-EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
-
-static int dma_alloc_from_coherent_mem(struct device *dev, ssize_t size,
-				       dma_addr_t *dma_handle, void **ret)
-{
-	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
-	int order = get_order(size);
-
-	if (mem) {
-		int page = bitmap_find_free_region(mem->bitmap, mem->size,
-						     order);
-		if (page >= 0) {
-			*dma_handle = mem->device_base + (page << PAGE_SHIFT);
-			*ret = mem->virt_base + (page << PAGE_SHIFT);
-			memset(*ret, 0, size);
-		}
-		if (mem->flags & DMA_MEMORY_EXCLUSIVE)
-			*ret = NULL;
-	}
-	return (mem != NULL);
-}
-
-static int dma_release_coherent(struct device *dev, int order, void *vaddr)
-{
-	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
-
-	if (mem && vaddr >= mem->virt_base && vaddr <
-		   (mem->virt_base + (mem->size << PAGE_SHIFT))) {
-		int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
-
-		bitmap_release_region(mem->bitmap, page, order);
-		return 1;
-	}
-	return 0;
-}
-#else
-#define dma_alloc_from_coherent_mem(dev, size, handle, ret) (0)
-#define dma_release_coherent(dev, order, vaddr) (0)
-#endif /* CONFIG_X86_32 */
-
 int dma_supported(struct device *dev, u64 mask)
 {
 	struct dma_mapping_ops *ops = get_dma_ops(dev);
@@ -379,7 +261,7 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 	/* ignore region specifiers */
 	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
 
-	if (dma_alloc_from_coherent_mem(dev, size, dma_handle, &memory))
+	if (dma_alloc_from_coherent(dev, size, dma_handle, &memory))
 		return memory;
 
 	if (!dev) {
@@ -484,7 +366,7 @@ void dma_free_coherent(struct device *dev, size_t size,
 
 	int order = get_order(size);
 	WARN_ON(irqs_disabled());	/* for portability */
-	if (dma_release_coherent(dev, order, vaddr))
+	if (dma_release_from_coherent(dev, order, vaddr))
 		return;
 	if (ops->unmap_single)
 		ops->unmap_single(dev, bus, size, 0);
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index 744126e..49285f8 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -67,9 +67,6 @@ static u32 gart_unmapped_entry;
 	(((x) & 0xfffff000) | (((x) >> 32) << 4) | GPTE_VALID | GPTE_COHERENT)
 #define GPTE_DECODE(x) (((x) & 0xfffff000) | (((u64)(x) & 0xff0) << 28))
 
-#define to_pages(addr, size) \
-	(round_up(((addr) & ~PAGE_MASK) + (size), PAGE_SIZE) >> PAGE_SHIFT)
-
 #define EMERGENCY_PAGES 32 /* = 128KB */
 
 #ifdef CONFIG_AGP
@@ -241,7 +238,7 @@ nonforced_iommu(struct device *dev, unsigned long addr, size_t size)
 static dma_addr_t dma_map_area(struct device *dev, dma_addr_t phys_mem,
 				size_t size, int dir)
 {
-	unsigned long npages = to_pages(phys_mem, size);
+	unsigned long npages = iommu_num_pages(phys_mem, size);
 	unsigned long iommu_page = alloc_iommu(dev, npages);
 	int i;
 
@@ -304,7 +301,7 @@ static void gart_unmap_single(struct device *dev, dma_addr_t dma_addr,
 		return;
 
 	iommu_page = (dma_addr - iommu_bus_base)>>PAGE_SHIFT;
-	npages = to_pages(dma_addr, size);
+	npages = iommu_num_pages(dma_addr, size);
 	for (i = 0; i < npages; i++) {
 		iommu_gatt_base[iommu_page + i] = gart_unmapped_entry;
 		CLEAR_LEAK(iommu_page + i);
@@ -387,7 +384,7 @@ static int __dma_map_cont(struct device *dev, struct scatterlist *start,
 		}
 
 		addr = phys_addr;
-		pages = to_pages(s->offset, s->length);
+		pages = iommu_num_pages(s->offset, s->length);
 		while (pages--) {
 			iommu_gatt_base[iommu_page] = GPTE_ENCODE(addr);
 			SET_LEAK(iommu_page);
@@ -470,7 +467,7 @@ gart_map_sg(struct device *dev, struct scatterlist *sg, int nents, int dir)
 
 		seg_size += s->length;
 		need = nextneed;
-		pages += to_pages(s->offset, s->length);
+		pages += iommu_num_pages(s->offset, s->length);
 		ps = s;
 	}
 	if (dma_map_cont(dev, start_sg, i - start, sgmap, pages, need) < 0)
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 06a9f64..724adfc 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -414,25 +414,20 @@ void native_machine_shutdown(void)
 
 	/* The boot cpu is always logical cpu 0 */
 	int reboot_cpu_id = 0;
-	cpumask_of_cpu_ptr(newmask, reboot_cpu_id);
 
 #ifdef CONFIG_X86_32
 	/* See if there has been given a command line override */
 	if ((reboot_cpu != -1) && (reboot_cpu < NR_CPUS) &&
-		cpu_online(reboot_cpu)) {
+		cpu_online(reboot_cpu))
 		reboot_cpu_id = reboot_cpu;
-		cpumask_of_cpu_ptr_next(newmask, reboot_cpu_id);
-	}
 #endif
 
 	/* Make certain the cpu I'm about to reboot on is online */
-	if (!cpu_online(reboot_cpu_id)) {
+	if (!cpu_online(reboot_cpu_id))
 		reboot_cpu_id = smp_processor_id();
-		cpumask_of_cpu_ptr_next(newmask, reboot_cpu_id);
-	}
 
 	/* Make certain I only run on the appropriate processor */
-	set_cpus_allowed_ptr(current, newmask);
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(reboot_cpu_id));
 
 	/* O.K Now that I'm on the appropriate processor,
 	 * stop all of the others.
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index f7745f9..76e305e 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -80,24 +80,6 @@ static void __init setup_per_cpu_maps(void)
 #endif
 }
 
-#ifdef CONFIG_HAVE_CPUMASK_OF_CPU_MAP
-cpumask_t *cpumask_of_cpu_map __read_mostly;
-EXPORT_SYMBOL(cpumask_of_cpu_map);
-
-/* requires nr_cpu_ids to be initialized */
-static void __init setup_cpumask_of_cpu(void)
-{
-	int i;
-
-	/* alloc_bootmem zeroes memory */
-	cpumask_of_cpu_map = alloc_bootmem_low(sizeof(cpumask_t) * nr_cpu_ids);
-	for (i = 0; i < nr_cpu_ids; i++)
-		cpu_set(i, cpumask_of_cpu_map[i]);
-}
-#else
-static inline void setup_cpumask_of_cpu(void) { }
-#endif
-
 #ifdef CONFIG_X86_32
 /*
  * Great future not-so-futuristic plan: make i386 and x86_64 do it
@@ -197,9 +179,6 @@ void __init setup_per_cpu_areas(void)
 
 	/* Setup node to cpumask map */
 	setup_node_to_cpumask_map();
-
-	/* Setup cpumask_of_cpu map */
-	setup_cpumask_of_cpu();
 }
 
 #endif
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index 8d45fab..ce3251c 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -21,6 +21,7 @@ config KVM
 	tristate "Kernel-based Virtual Machine (KVM) support"
 	depends on HAVE_KVM
 	select PREEMPT_NOTIFIERS
+	select MMU_NOTIFIER
 	select ANON_INODES
 	---help---
 	  Support hosting fully virtualized guest machines using hardware
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 0313a5e..d9249a8 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -1014,6 +1014,9 @@ __init void lguest_init(void)
 	init_pg_tables_start = __pa(pg0);
 	init_pg_tables_end = __pa(pg0);
 
+	/* As described in head_32.S, we map the first 128M of memory. */
+	max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT;
+
 	/* Load the %fs segment register (the per-cpu segment register) with
 	 * the normal data segment to get through booting. */
 	asm volatile ("mov %0, %%fs" : : "r" (__KERNEL_DS) : "memory");
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index 3085f25..007bb06 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -223,14 +223,17 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 			struct page **pages)
 {
 	struct mm_struct *mm = current->mm;
-	unsigned long end = start + (nr_pages << PAGE_SHIFT);
-	unsigned long addr = start;
+	unsigned long addr, len, end;
 	unsigned long next;
 	pgd_t *pgdp;
 	int nr = 0;
 
+	start &= PAGE_MASK;
+	addr = start;
+	len = (unsigned long) nr_pages << PAGE_SHIFT;
+	end = start + len;
 	if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
-					start, nr_pages*PAGE_SIZE)))
+					start, len)))
 		goto slow_irqon;
 
 	/*
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index ff3a6a3..4bdaa59 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -23,7 +23,8 @@ static void __devinit pci_fixup_i450nx(struct pci_dev *d)
 		pci_read_config_byte(d, reg++, &busno);
 		pci_read_config_byte(d, reg++, &suba);
 		pci_read_config_byte(d, reg++, &subb);
-		DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
+		dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno,
+			suba, subb);
 		if (busno)
 			pci_scan_bus_with_sysdata(busno);	/* Bus A */
 		if (suba < subb)
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index a095058..5807d1b 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -128,10 +128,8 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 				pr = pci_find_parent_resource(dev, r);
 				if (!r->start || !pr ||
 				    request_resource(pr, r) < 0) {
-					printk(KERN_ERR "PCI: Cannot allocate "
-						"resource region %d "
-						"of bridge %s\n",
-						idx, pci_name(dev));
+					dev_err(&dev->dev, "BAR %d: can't "
+						"allocate resource\n", idx);
 					/*
 					 * Something is wrong with the region.
 					 * Invalidate the resource to prevent
@@ -166,15 +164,15 @@ static void __init pcibios_allocate_resources(int pass)
 			else
 				disabled = !(command & PCI_COMMAND_MEMORY);
 			if (pass == disabled) {
-				DBG("PCI: Resource %08lx-%08lx "
-				    "(f=%lx, d=%d, p=%d)\n",
-				    r->start, r->end, r->flags, disabled, pass);
+				dev_dbg(&dev->dev, "resource %#08llx-%#08llx "
+					"(f=%lx, d=%d, p=%d)\n",
+					(unsigned long long) r->start,
+					(unsigned long long) r->end,
+					r->flags, disabled, pass);
 				pr = pci_find_parent_resource(dev, r);
 				if (!pr || request_resource(pr, r) < 0) {
-					printk(KERN_ERR "PCI: Cannot allocate "
-						"resource region %d "
-						"of device %s\n",
-						idx, pci_name(dev));
+					dev_err(&dev->dev, "BAR %d: can't "
+						"allocate resource\n", idx);
 					/* We'll assign a new address later */
 					r->end -= r->start;
 					r->start = 0;
@@ -187,8 +185,7 @@ static void __init pcibios_allocate_resources(int pass)
 				/* Turn the ROM off, leave the resource region,
 				 * but keep it unregistered. */
 				u32 reg;
-				DBG("PCI: Switching off ROM of %s\n",
-					pci_name(dev));
+				dev_dbg(&dev->dev, "disabling ROM\n");
 				r->flags &= ~IORESOURCE_ROM_ENABLE;
 				pci_read_config_dword(dev,
 						dev->rom_base_reg, &reg);
@@ -257,8 +254,7 @@ void pcibios_set_master(struct pci_dev *dev)
 		lat = pcibios_max_latency;
 	else
 		return;
-	printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n",
-		pci_name(dev), lat);
+	dev_printk(KERN_DEBUG, &dev->dev, "setting latency timer to %d\n", lat);
 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
 }
 
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 6a06a2e..fec0123 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -436,7 +436,7 @@ static int pirq_vlsi_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
 {
 	WARN_ON_ONCE(pirq >= 9);
 	if (pirq > 8) {
-		printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq);
+		dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq);
 		return 0;
 	}
 	return read_config_nybble(router, 0x74, pirq-1);
@@ -446,7 +446,7 @@ static int pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
 {
 	WARN_ON_ONCE(pirq >= 9);
 	if (pirq > 8) {
-		printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq);
+		dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq);
 		return 0;
 	}
 	write_config_nybble(router, 0x74, pirq-1, irq);
@@ -492,15 +492,17 @@ static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq
 	irq = 0;
 	if (pirq <= 4)
 		irq = read_config_nybble(router, 0x56, pirq - 1);
-	printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n",
-		dev->vendor, dev->device, pirq, irq);
+	dev_info(&dev->dev,
+		 "AMD756: dev [%04x/%04x], router PIRQ %d get IRQ %d\n",
+		 dev->vendor, dev->device, pirq, irq);
 	return irq;
 }
 
 static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
 {
-	printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n",
-		dev->vendor, dev->device, pirq, irq);
+	dev_info(&dev->dev,
+		 "AMD756: dev [%04x/%04x], router PIRQ %d set IRQ %d\n",
+		 dev->vendor, dev->device, pirq, irq);
 	if (pirq <= 4)
 		write_config_nybble(router, 0x56, pirq - 1, irq);
 	return 1;
@@ -730,7 +732,6 @@ static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router,
 	switch (device) {
 	case PCI_DEVICE_ID_AL_M1533:
 	case PCI_DEVICE_ID_AL_M1563:
-		printk(KERN_DEBUG "PCI: Using ALI IRQ Router\n");
 		r->name = "ALI";
 		r->get = pirq_ali_get;
 		r->set = pirq_ali_set;
@@ -840,11 +841,9 @@ static void __init pirq_find_router(struct irq_router *r)
 			h->probe(r, pirq_router_dev, pirq_router_dev->device))
 			break;
 	}
-	printk(KERN_INFO "PCI: Using IRQ router %s [%04x/%04x] at %s\n",
-		pirq_router.name,
-		pirq_router_dev->vendor,
-		pirq_router_dev->device,
-		pci_name(pirq_router_dev));
+	dev_info(&pirq_router_dev->dev, "%s IRQ router [%04x/%04x]\n",
+		 pirq_router.name,
+		 pirq_router_dev->vendor, pirq_router_dev->device);
 
 	/* The device remains referenced for the kernel lifetime */
 }
@@ -877,7 +876,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 	/* Find IRQ pin */
 	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
 	if (!pin) {
-		DBG(KERN_DEBUG " -> no interrupt pin\n");
+		dev_dbg(&dev->dev, "no interrupt pin\n");
 		return 0;
 	}
 	pin = pin - 1;
@@ -887,20 +886,20 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 	if (!pirq_table)
 		return 0;
 
-	DBG(KERN_DEBUG "IRQ for %s[%c]", pci_name(dev), 'A' + pin);
 	info = pirq_get_info(dev);
 	if (!info) {
-		DBG(" -> not found in routing table\n" KERN_DEBUG);
+		dev_dbg(&dev->dev, "PCI INT %c not found in routing table\n",
+			'A' + pin);
 		return 0;
 	}
 	pirq = info->irq[pin].link;
 	mask = info->irq[pin].bitmap;
 	if (!pirq) {
-		DBG(" -> not routed\n" KERN_DEBUG);
+		dev_dbg(&dev->dev, "PCI INT %c not routed\n", 'A' + pin);
 		return 0;
 	}
-	DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask,
-		pirq_table->exclusive_irqs);
+	dev_dbg(&dev->dev, "PCI INT %c -> PIRQ %02x, mask %04x, excl %04x",
+		'A' + pin, pirq, mask, pirq_table->exclusive_irqs);
 	mask &= pcibios_irq_mask;
 
 	/* Work around broken HP Pavilion Notebooks which assign USB to
@@ -930,10 +929,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 		if (pci_probe & PCI_USE_PIRQ_MASK)
 			newirq = 0;
 		else
-			printk("\n" KERN_WARNING
-				"PCI: IRQ %i for device %s doesn't match PIRQ mask - try pci=usepirqmask\n"
-				KERN_DEBUG, newirq,
-				pci_name(dev));
+			dev_warn(&dev->dev, "IRQ %d doesn't match PIRQ mask "
+				 "%#x; try pci=usepirqmask\n", newirq, mask);
 	}
 	if (!newirq && assign) {
 		for (i = 0; i < 16; i++) {
@@ -944,39 +941,35 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 				newirq = i;
 		}
 	}
-	DBG(" -> newirq=%d", newirq);
+	dev_dbg(&dev->dev, "PCI INT %c -> newirq %d", 'A' + pin, newirq);
 
 	/* Check if it is hardcoded */
 	if ((pirq & 0xf0) == 0xf0) {
 		irq = pirq & 0xf;
-		DBG(" -> hardcoded IRQ %d\n", irq);
-		msg = "Hardcoded";
+		msg = "hardcoded";
 	} else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
 	((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) {
-		DBG(" -> got IRQ %d\n", irq);
-		msg = "Found";
+		msg = "found";
 		eisa_set_level_irq(irq);
 	} else if (newirq && r->set &&
 		(dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
-		DBG(" -> assigning IRQ %d", newirq);
 		if (r->set(pirq_router_dev, dev, pirq, newirq)) {
 			eisa_set_level_irq(newirq);
-			DBG(" ... OK\n");
-			msg = "Assigned";
+			msg = "assigned";
 			irq = newirq;
 		}
 	}
 
 	if (!irq) {
-		DBG(" ... failed\n");
 		if (newirq && mask == (1 << newirq)) {
-			msg = "Guessed";
+			msg = "guessed";
 			irq = newirq;
-		} else
+		} else {
+			dev_dbg(&dev->dev, "can't route interrupt\n");
 			return 0;
+		}
 	}
-	printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq,
-		pci_name(dev));
+	dev_info(&dev->dev, "%s PCI INT %c -> IRQ %d\n", msg, 'A' + pin, irq);
 
 	/* Update IRQ for all devices with the same pirq value */
 	while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) {
@@ -996,17 +989,17 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 			(!(pci_probe & PCI_USE_PIRQ_MASK) || \
 			((1 << dev2->irq) & mask))) {
 #ifndef CONFIG_PCI_MSI
-				printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n",
-				       pci_name(dev2), dev2->irq, irq);
+				dev_info(&dev2->dev, "IRQ routing conflict: "
+					 "have IRQ %d, want IRQ %d\n",
+					 dev2->irq, irq);
 #endif
 				continue;
 			}
 			dev2->irq = irq;
 			pirq_penalty[irq]++;
 			if (dev != dev2)
-				printk(KERN_INFO
-					"PCI: Sharing IRQ %d with %s\n",
-					irq, pci_name(dev2));
+				dev_info(&dev->dev, "sharing IRQ %d with %s\n",
+					 irq, pci_name(dev2));
 		}
 	}
 	return 1;
@@ -1025,8 +1018,7 @@ static void __init pcibios_fixup_irqs(void)
 		 * already in use.
 		 */
 		if (dev->irq >= 16) {
-			DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n",
-				pci_name(dev), dev->irq);
+			dev_dbg(&dev->dev, "ignoring bogus IRQ %d\n", dev->irq);
 			dev->irq = 0;
 		}
 		/*
@@ -1070,12 +1062,12 @@ static void __init pcibios_fixup_irqs(void)
 					irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
 							PCI_SLOT(bridge->devfn), pin);
 					if (irq >= 0)
-						printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
-							pci_name(bridge), 'A' + pin, irq);
+						dev_warn(&dev->dev, "using bridge %s INT %c to get IRQ %d\n",
+							 pci_name(bridge),
+							 'A' + pin, irq);
 				}
 				if (irq >= 0) {
-					printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
-						pci_name(dev), 'A' + pin, irq);
+					dev_info(&dev->dev, "PCI->APIC IRQ transform: INT %c -> IRQ %d\n", 'A' + pin, irq);
 					dev->irq = irq;
 				}
 			}
@@ -1231,25 +1223,24 @@ static int pirq_enable_irq(struct pci_dev *dev)
 				irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
 						PCI_SLOT(bridge->devfn), pin);
 				if (irq >= 0)
-					printk(KERN_WARNING
-						"PCI: using PPB %s[%c] to get irq %d\n",
-						pci_name(bridge),
-						'A' + pin, irq);
+					dev_warn(&dev->dev, "using bridge %s "
+						 "INT %c to get IRQ %d\n",
+						 pci_name(bridge), 'A' + pin,
+						 irq);
 				dev = bridge;
 			}
 			dev = temp_dev;
 			if (irq >= 0) {
-				printk(KERN_INFO
-					"PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
-					pci_name(dev), 'A' + pin, irq);
+				dev_info(&dev->dev, "PCI->APIC IRQ transform: "
+					 "INT %c -> IRQ %d\n", 'A' + pin, irq);
 				dev->irq = irq;
 				return 0;
 			} else
-				msg = " Probably buggy MP table.";
+				msg = "; probably buggy MP table";
 		} else if (pci_probe & PCI_BIOS_IRQ_SCAN)
 			msg = "";
 		else
-			msg = " Please try using pci=biosirq.";
+			msg = "; please try using pci=biosirq";
 
 		/*
 		 * With IDE legacy devices the IRQ lookup failure is not
@@ -1259,9 +1250,8 @@ static int pirq_enable_irq(struct pci_dev *dev)
 				!(dev->class & 0x5))
 			return 0;
 
-		printk(KERN_WARNING
-			"PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
-			'A' + pin, pci_name(dev), msg);
+		dev_warn(&dev->dev, "can't find IRQ for PCI INT %c%s\n",
+			 'A' + pin, msg);
 	}
 	return 0;
 }
diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c
index f4b16dc..1177845 100644
--- a/arch/x86/pci/numaq_32.c
+++ b/arch/x86/pci/numaq_32.c
@@ -131,13 +131,14 @@ static void __devinit pci_fixup_i450nx(struct pci_dev *d)
 	u8 busno, suba, subb;
 	int quad = BUS2QUAD(d->bus->number);
 
-	printk("PCI: Searching for i450NX host bridges on %s\n", pci_name(d));
+	dev_info(&d->dev, "searching for i450NX host bridges\n");
 	reg = 0xd0;
 	for(pxb=0; pxb<2; pxb++) {
 		pci_read_config_byte(d, reg++, &busno);
 		pci_read_config_byte(d, reg++, &suba);
 		pci_read_config_byte(d, reg++, &subb);
-		DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
+		dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n",
+			pxb, busno, suba, subb);
 		if (busno) {
 			/* Bus A */
 			pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno));