diff options
author | Pawel Moll <pawel.moll@arm.com> | 2012-10-09 11:56:36 (GMT) |
---|---|---|
committer | Pawel Moll <pawel.moll@arm.com> | 2012-11-05 17:09:51 (GMT) |
commit | 38669e045dbf8f62a008898a7fb1e93975b3817c (patch) | |
tree | b989816e1a4625729189c08eb08367bc73b268ff /arch | |
parent | 842839a37a9a9ac12d88930b6605c620fc09bc1d (diff) | |
download | linux-38669e045dbf8f62a008898a7fb1e93975b3817c.tar.xz |
ARM: vexpress: Start using new Versatile Express infrastructure
This patch starts using all the configuration infrastructure.
- generic GPIO library is forced now
- sysreg GPIOs are used as MMC CD and WP information sources;
thanks to this MMCI auxiliary data is not longer necessary
- DVI muxer and mode control is removed from non-DT V2P-CA9 code
as this is now handled by the vexpress-dvi driver
- clock generators control is removed as is being handled by the
common clock driver now
- the sysreg and sysctl control is now delegated to the
appropriate drivers and all related code was removed
- NOR Flash set_vpp function has been removed as the control
bit used does _not_ control its VPP line, but the #WP signal
instead (which is de facto unusable in case of Linux MTD
drivers); this also allowed the remove its DT auxiliary
data
The non-DT code defines only minimal required number of
the config devices. Device Trees are updated to make use
of all new features.
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/include/asm/hardware/sp810.h | 6 | ||||
-rw-r--r-- | arch/arm/mach-vexpress/Kconfig | 4 | ||||
-rw-r--r-- | arch/arm/mach-vexpress/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/mach-vexpress/ct-ca9x4.c | 41 | ||||
-rw-r--r-- | arch/arm/mach-vexpress/include/mach/motherboard.h | 81 | ||||
-rw-r--r-- | arch/arm/mach-vexpress/platsmp.c | 3 | ||||
-rw-r--r-- | arch/arm/mach-vexpress/v2m.c | 332 |
7 files changed, 99 insertions, 370 deletions
diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h index afd7e91..6636430 100644 --- a/arch/arm/include/asm/hardware/sp810.h +++ b/arch/arm/include/asm/hardware/sp810.h @@ -50,12 +50,6 @@ #define SCPCELLID2 0xFF8 #define SCPCELLID3 0xFFC -#define SCCTRL_TIMEREN0SEL_REFCLK (0 << 15) -#define SCCTRL_TIMEREN0SEL_TIMCLK (1 << 15) - -#define SCCTRL_TIMEREN1SEL_REFCLK (0 << 17) -#define SCCTRL_TIMEREN1SEL_TIMCLK (1 << 17) - #define SCCTRL_TIMERENnSEL_SHIFT(n) (15 + ((n) * 2)) static inline void sysctl_soft_reset(void __iomem *base) diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index c952960..99e63f5 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -1,11 +1,12 @@ config ARCH_VEXPRESS bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7 - select ARCH_WANT_OPTIONAL_GPIOLIB + select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_GIC select ARM_TIMER_SP804 select CLKDEV_LOOKUP select COMMON_CLK + select COMMON_CLK_VERSATILE select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_CLK @@ -17,6 +18,7 @@ config ARCH_VEXPRESS select PLAT_VERSATILE select PLAT_VERSATILE_CLCD select REGULATOR_FIXED_VOLTAGE if REGULATOR + select VEXPRESS_CONFIG help This option enables support for systems using Cortex processor based ARM core and logic (FPGA) tiles on the Versatile Express motherboard, diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile index 42703e8..80b6497 100644 --- a/arch/arm/mach-vexpress/Makefile +++ b/arch/arm/mach-vexpress/Makefile @@ -4,7 +4,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ -I$(srctree)/arch/arm/plat-versatile/include -obj-y := v2m.o +obj-y := v2m.o reset.o obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 4f471fa..60838dd 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -9,6 +9,7 @@ #include <linux/amba/bus.h> #include <linux/amba/clcd.h> #include <linux/clkdev.h> +#include <linux/vexpress.h> #include <asm/hardware/arm_timer.h> #include <asm/hardware/cache-l2x0.h> @@ -64,19 +65,6 @@ static void __init ct_ca9x4_init_irq(void) ca9x4_twd_init(); } -static void ct_ca9x4_clcd_enable(struct clcd_fb *fb) -{ - u32 site = v2m_get_master_site(); - - /* - * Old firmware was using the "site" component of the command - * to control the DVI muxer (while it should be always 0 ie. MB). - * Newer firmware uses the data register. Keep both for compatibility. - */ - v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE(site), site); - v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE(SYS_CFG_SITE_MB), 2); -} - static int ct_ca9x4_clcd_setup(struct clcd_fb *fb) { unsigned long framesize = 1024 * 768 * 2; @@ -93,7 +81,6 @@ static struct clcd_board ct_ca9x4_clcd_data = { .caps = CLCD_CAP_5551 | CLCD_CAP_565, .check = clcdfb_check, .decode = clcdfb_decode, - .enable = ct_ca9x4_clcd_enable, .setup = ct_ca9x4_clcd_setup, .mmap = versatile_clcd_mmap_dma, .remove = versatile_clcd_remove_dma, @@ -111,14 +98,6 @@ static struct amba_device *ct_ca9x4_amba_devs[] __initdata = { &gpio_device, }; - -static struct v2m_osc ct_osc1 = { - .osc = 1, - .rate_min = 10000000, - .rate_max = 80000000, - .rate_default = 23750000, -}; - static struct resource pmu_resources[] = { [0] = { .start = IRQ_CT_CA9X4_PMU_CPU0, @@ -149,10 +128,18 @@ static struct platform_device pmu_device = { .resource = pmu_resources, }; +static struct platform_device osc1_device = { + .name = "vexpress-osc", + .id = 1, + .num_resources = 1, + .resource = (struct resource []) { + VEXPRESS_RES_FUNC(0xf, 1), + }, +}; + static void __init ct_ca9x4_init(void) { int i; - struct clk *clk; #ifdef CONFIG_CACHE_L2X0 void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K); @@ -164,14 +151,14 @@ static void __init ct_ca9x4_init(void) l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff); #endif - ct_osc1.site = v2m_get_master_site(); - clk = v2m_osc_register("ct:osc1", &ct_osc1); - clk_register_clkdev(clk, NULL, "ct:clcd"); - for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++) amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource); platform_device_register(&pmu_device); + platform_device_register(&osc1_device); + + WARN_ON(clk_register_clkdev(vexpress_osc_setup(&osc1_device.dev), + NULL, "ct:clcd")); } #ifdef CONFIG_SMP diff --git a/arch/arm/mach-vexpress/include/mach/motherboard.h b/arch/arm/mach-vexpress/include/mach/motherboard.h index 1e388c7..68abc8b 100644 --- a/arch/arm/mach-vexpress/include/mach/motherboard.h +++ b/arch/arm/mach-vexpress/include/mach/motherboard.h @@ -1,8 +1,6 @@ #ifndef __MACH_MOTHERBOARD_H #define __MACH_MOTHERBOARD_H -#include <linux/clk-provider.h> - /* * Physical addresses, offset from V2M_PA_CS0-3 */ @@ -41,31 +39,6 @@ #define V2M_CF (V2M_PA_CS7 + 0x0001a000) #define V2M_CLCD (V2M_PA_CS7 + 0x0001f000) -/* - * Offsets from SYSREGS base - */ -#define V2M_SYS_ID 0x000 -#define V2M_SYS_SW 0x004 -#define V2M_SYS_LED 0x008 -#define V2M_SYS_100HZ 0x024 -#define V2M_SYS_FLAGS 0x030 -#define V2M_SYS_FLAGSSET 0x030 -#define V2M_SYS_FLAGSCLR 0x034 -#define V2M_SYS_NVFLAGS 0x038 -#define V2M_SYS_NVFLAGSSET 0x038 -#define V2M_SYS_NVFLAGSCLR 0x03c -#define V2M_SYS_MCI 0x048 -#define V2M_SYS_FLASH 0x03c -#define V2M_SYS_CFGSW 0x058 -#define V2M_SYS_24MHZ 0x05c -#define V2M_SYS_MISC 0x060 -#define V2M_SYS_DMA 0x064 -#define V2M_SYS_PROCID0 0x084 -#define V2M_SYS_PROCID1 0x088 -#define V2M_SYS_CFGDATA 0x0a0 -#define V2M_SYS_CFGCTRL 0x0a4 -#define V2M_SYS_CFGSTAT 0x0a8 - /* * Interrupts. Those in {} are for AMBA devices @@ -91,43 +64,6 @@ /* - * Configuration - */ -#define SYS_CFG_START (1 << 31) -#define SYS_CFG_WRITE (1 << 30) -#define SYS_CFG_OSC (1 << 20) -#define SYS_CFG_VOLT (2 << 20) -#define SYS_CFG_AMP (3 << 20) -#define SYS_CFG_TEMP (4 << 20) -#define SYS_CFG_RESET (5 << 20) -#define SYS_CFG_SCC (6 << 20) -#define SYS_CFG_MUXFPGA (7 << 20) -#define SYS_CFG_SHUTDOWN (8 << 20) -#define SYS_CFG_REBOOT (9 << 20) -#define SYS_CFG_DVIMODE (11 << 20) -#define SYS_CFG_POWER (12 << 20) -#define SYS_CFG_SITE(n) ((n) << 16) -#define SYS_CFG_SITE_MB 0 -#define SYS_CFG_SITE_DB1 1 -#define SYS_CFG_SITE_DB2 2 -#define SYS_CFG_STACK(n) ((n) << 12) - -#define SYS_CFG_ERR (1 << 1) -#define SYS_CFG_COMPLETE (1 << 0) - -int v2m_cfg_write(u32 devfn, u32 data); -int v2m_cfg_read(u32 devfn, u32 *data); -void v2m_flags_set(u32 data); - -/* - * Miscellaneous - */ -#define SYS_MISC_MASTERSITE (1 << 14) -#define SYS_PROCIDx_HBI_MASK 0xfff - -int v2m_get_master_site(void); - -/* * Core tile IDs */ #define V2M_CT_ID_CA9 0x0c000191 @@ -149,21 +85,4 @@ struct ct_desc { extern struct ct_desc *ct_desc; -/* - * OSC clock provider - */ -struct v2m_osc { - struct clk_hw hw; - u8 site; /* 0 = motherboard, 1 = site 1, 2 = site 2 */ - u8 stack; /* board stack position */ - u16 osc; - unsigned long rate_min; - unsigned long rate_max; - unsigned long rate_default; -}; - -#define to_v2m_osc(osc) container_of(osc, struct v2m_osc, hw) - -struct clk *v2m_osc_register(const char *name, struct v2m_osc *osc); - #endif diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index 7db27c8..c5d70de 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -13,6 +13,7 @@ #include <linux/smp.h> #include <linux/io.h> #include <linux/of_fdt.h> +#include <linux/vexpress.h> #include <asm/smp_scu.h> #include <asm/hardware/gic.h> @@ -193,7 +194,7 @@ static void __init vexpress_smp_prepare_cpus(unsigned int max_cpus) * until it receives a soft interrupt, and then the * secondary CPU branches to this address. */ - v2m_flags_set(virt_to_phys(versatile_secondary_startup)); + vexpress_flags_set(virt_to_phys(versatile_secondary_startup)); } struct smp_operations __initdata vexpress_smp_ops = { diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 560e0df..99d4172 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -16,11 +16,10 @@ #include <linux/smsc911x.h> #include <linux/spinlock.h> #include <linux/usb/isp1760.h> -#include <linux/clkdev.h> -#include <linux/clk-provider.h> #include <linux/mtd/physmap.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> +#include <linux/vexpress.h> #include <asm/arch_timer.h> #include <asm/mach-types.h> @@ -33,7 +32,6 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/hardware/gic.h> #include <asm/hardware/timer-sp.h> -#include <asm/hardware/sp810.h> #include <mach/ct-ca9x4.h> #include <mach/motherboard.h> @@ -58,22 +56,6 @@ static struct map_desc v2m_io_desc[] __initdata = { }, }; -static void __iomem *v2m_sysreg_base; - -static void __init v2m_sysctl_init(void __iomem *base) -{ - u32 scctrl; - - if (WARN_ON(!base)) - return; - - /* Select 1MHz TIMCLK as the reference clock for SP804 timers */ - scctrl = readl(base + SCCTRL); - scctrl |= SCCTRL_TIMEREN0SEL_TIMCLK; - scctrl |= SCCTRL_TIMEREN1SEL_TIMCLK; - writel(scctrl, base + SCCTRL); -} - static void __init v2m_sp804_init(void __iomem *base, unsigned int irq) { if (WARN_ON(!base || irq == NO_IRQ)) @@ -87,69 +69,6 @@ static void __init v2m_sp804_init(void __iomem *base, unsigned int irq) } -static DEFINE_SPINLOCK(v2m_cfg_lock); - -int v2m_cfg_write(u32 devfn, u32 data) -{ - /* Configuration interface broken? */ - u32 val; - - printk("%s: writing %08x to %08x\n", __func__, data, devfn); - - devfn |= SYS_CFG_START | SYS_CFG_WRITE; - - spin_lock(&v2m_cfg_lock); - val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT); - writel(val & ~SYS_CFG_COMPLETE, v2m_sysreg_base + V2M_SYS_CFGSTAT); - - writel(data, v2m_sysreg_base + V2M_SYS_CFGDATA); - writel(devfn, v2m_sysreg_base + V2M_SYS_CFGCTRL); - - do { - val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT); - } while (val == 0); - spin_unlock(&v2m_cfg_lock); - - return !!(val & SYS_CFG_ERR); -} - -int v2m_cfg_read(u32 devfn, u32 *data) -{ - u32 val; - - devfn |= SYS_CFG_START; - - spin_lock(&v2m_cfg_lock); - writel(0, v2m_sysreg_base + V2M_SYS_CFGSTAT); - writel(devfn, v2m_sysreg_base + V2M_SYS_CFGCTRL); - - mb(); - - do { - cpu_relax(); - val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT); - } while (val == 0); - - *data = readl(v2m_sysreg_base + V2M_SYS_CFGDATA); - spin_unlock(&v2m_cfg_lock); - - return !!(val & SYS_CFG_ERR); -} - -void __init v2m_flags_set(u32 data) -{ - writel(~0, v2m_sysreg_base + V2M_SYS_FLAGSCLR); - writel(data, v2m_sysreg_base + V2M_SYS_FLAGSSET); -} - -int v2m_get_master_site(void) -{ - u32 misc = readl(v2m_sysreg_base + V2M_SYS_MISC); - - return misc & SYS_MISC_MASTERSITE ? SYS_CFG_SITE_DB2 : SYS_CFG_SITE_DB1; -} - - static struct resource v2m_pcie_i2c_resource = { .start = V2M_SERIAL_BUS_PCI, .end = V2M_SERIAL_BUS_PCI + SZ_4K - 1, @@ -237,14 +156,8 @@ static struct platform_device v2m_usb_device = { .dev.platform_data = &v2m_usb_config, }; -static void v2m_flash_set_vpp(struct platform_device *pdev, int on) -{ - writel(on != 0, v2m_sysreg_base + V2M_SYS_FLASH); -} - static struct physmap_flash_data v2m_flash_data = { .width = 4, - .set_vpp = v2m_flash_set_vpp, }; static struct resource v2m_flash_resources[] = { @@ -291,14 +204,61 @@ static struct platform_device v2m_cf_device = { .dev.platform_data = &v2m_pata_data, }; -static unsigned int v2m_mmci_status(struct device *dev) -{ - return readl(v2m_sysreg_base + V2M_SYS_MCI) & (1 << 0); -} - static struct mmci_platform_data v2m_mmci_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .status = v2m_mmci_status, + .gpio_wp = VEXPRESS_GPIO_MMC_WPROT, + .gpio_cd = VEXPRESS_GPIO_MMC_CARDIN, +}; + +static struct resource v2m_sysreg_resources[] = { + { + .start = V2M_SYSREGS, + .end = V2M_SYSREGS + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device v2m_sysreg_device = { + .name = "vexpress-sysreg", + .id = -1, + .resource = v2m_sysreg_resources, + .num_resources = ARRAY_SIZE(v2m_sysreg_resources), +}; + +static struct platform_device v2m_muxfpga_device = { + .name = "vexpress-muxfpga", + .id = 0, + .num_resources = 1, + .resource = (struct resource []) { + VEXPRESS_RES_FUNC(0, 7), + } +}; + +static struct platform_device v2m_shutdown_device = { + .name = "vexpress-shutdown", + .id = 0, + .num_resources = 1, + .resource = (struct resource []) { + VEXPRESS_RES_FUNC(0, 8), + } +}; + +static struct platform_device v2m_reboot_device = { + .name = "vexpress-reboot", + .id = 0, + .num_resources = 1, + .resource = (struct resource []) { + VEXPRESS_RES_FUNC(0, 9), + } +}; + +static struct platform_device v2m_dvimode_device = { + .name = "vexpress-dvimode", + .id = 0, + .num_resources = 1, + .resource = (struct resource []) { + VEXPRESS_RES_FUNC(0, 11), + } }; static AMBA_APB_DEVICE(aaci, "mb:aaci", 0, V2M_AACI, IRQ_V2M_AACI, NULL); @@ -325,123 +285,9 @@ static struct amba_device *v2m_amba_devs[] __initdata = { &rtc_device, }; - -static unsigned long v2m_osc_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct v2m_osc *osc = to_v2m_osc(hw); - - return !parent_rate ? osc->rate_default : parent_rate; -} - -static long v2m_osc_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *parent_rate) -{ - struct v2m_osc *osc = to_v2m_osc(hw); - - if (WARN_ON(rate < osc->rate_min)) - rate = osc->rate_min; - - if (WARN_ON(rate > osc->rate_max)) - rate = osc->rate_max; - - return rate; -} - -static int v2m_osc_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct v2m_osc *osc = to_v2m_osc(hw); - - v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE(osc->site) | - SYS_CFG_STACK(osc->stack) | osc->osc, rate); - - return 0; -} - -static struct clk_ops v2m_osc_ops = { - .recalc_rate = v2m_osc_recalc_rate, - .round_rate = v2m_osc_round_rate, - .set_rate = v2m_osc_set_rate, -}; - -struct clk * __init v2m_osc_register(const char *name, struct v2m_osc *osc) -{ - struct clk_init_data init; - - WARN_ON(osc->site > 2); - WARN_ON(osc->stack > 15); - WARN_ON(osc->osc > 4095); - - init.name = name; - init.ops = &v2m_osc_ops; - init.flags = CLK_IS_ROOT; - init.num_parents = 0; - - osc->hw.init = &init; - - return clk_register(NULL, &osc->hw); -} - -static struct v2m_osc v2m_mb_osc1 = { - .site = SYS_CFG_SITE_MB, - .osc = 1, - .rate_min = 23750000, - .rate_max = 63500000, - .rate_default = 23750000, -}; - -static const char *v2m_ref_clk_periphs[] __initconst = { - "mb:wdt", "1000f000.wdt", "1c0f0000.wdt", /* SP805 WDT */ -}; - -static const char *v2m_osc1_periphs[] __initconst = { - "mb:clcd", "1001f000.clcd", "1c1f0000.clcd", /* PL111 CLCD */ -}; - -static const char *v2m_osc2_periphs[] __initconst = { - "mb:mmci", "10005000.mmci", "1c050000.mmci", /* PL180 MMCI */ - "mb:kmi0", "10006000.kmi", "1c060000.kmi", /* PL050 KMI0 */ - "mb:kmi1", "10007000.kmi", "1c070000.kmi", /* PL050 KMI1 */ - "mb:uart0", "10009000.uart", "1c090000.uart", /* PL011 UART0 */ - "mb:uart1", "1000a000.uart", "1c0a0000.uart", /* PL011 UART1 */ - "mb:uart2", "1000b000.uart", "1c0b0000.uart", /* PL011 UART2 */ - "mb:uart3", "1000c000.uart", "1c0c0000.uart", /* PL011 UART3 */ -}; - -static void __init v2m_clk_init(void) -{ - struct clk *clk; - int i; - - clk = clk_register_fixed_rate(NULL, "dummy_apb_pclk", NULL, - CLK_IS_ROOT, 0); - WARN_ON(clk_register_clkdev(clk, "apb_pclk", NULL)); - - clk = clk_register_fixed_rate(NULL, "mb:ref_clk", NULL, - CLK_IS_ROOT, 32768); - for (i = 0; i < ARRAY_SIZE(v2m_ref_clk_periphs); i++) - WARN_ON(clk_register_clkdev(clk, NULL, v2m_ref_clk_periphs[i])); - - clk = clk_register_fixed_rate(NULL, "mb:sp804_clk", NULL, - CLK_IS_ROOT, 1000000); - WARN_ON(clk_register_clkdev(clk, "v2m-timer0", "sp804")); - WARN_ON(clk_register_clkdev(clk, "v2m-timer1", "sp804")); - - clk = v2m_osc_register("mb:osc1", &v2m_mb_osc1); - for (i = 0; i < ARRAY_SIZE(v2m_osc1_periphs); i++) - WARN_ON(clk_register_clkdev(clk, NULL, v2m_osc1_periphs[i])); - - clk = clk_register_fixed_rate(NULL, "mb:osc2", NULL, - CLK_IS_ROOT, 24000000); - for (i = 0; i < ARRAY_SIZE(v2m_osc2_periphs); i++) - WARN_ON(clk_register_clkdev(clk, NULL, v2m_osc2_periphs[i])); -} - static void __init v2m_timer_init(void) { - v2m_sysctl_init(ioremap(V2M_SYSCTL, SZ_4K)); - v2m_clk_init(); + vexpress_clk_init(ioremap(V2M_SYSCTL, SZ_4K)); v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0); } @@ -453,19 +299,7 @@ static void __init v2m_init_early(void) { if (ct_desc->init_early) ct_desc->init_early(); - versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000); -} - -static void v2m_power_off(void) -{ - if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE(SYS_CFG_SITE_MB), 0)) - printk(KERN_EMERG "Unable to shutdown\n"); -} - -static void v2m_restart(char str, const char *cmd) -{ - if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE(SYS_CFG_SITE_MB), 0)) - printk(KERN_EMERG "Unable to reboot\n"); + versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000); } struct ct_desc *ct_desc; @@ -482,7 +316,7 @@ static void __init v2m_populate_ct_desc(void) u32 current_tile_id; ct_desc = NULL; - current_tile_id = readl(v2m_sysreg_base + V2M_SYS_PROCID0) + current_tile_id = vexpress_get_procid(VEXPRESS_SITE_MASTER) & V2M_CT_ID_MASK; for (i = 0; i < ARRAY_SIZE(ct_descs) && !ct_desc; ++i) @@ -498,7 +332,7 @@ static void __init v2m_populate_ct_desc(void) static void __init v2m_map_io(void) { iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc)); - v2m_sysreg_base = ioremap(V2M_SYSREGS, SZ_4K); + vexpress_sysreg_early_init(ioremap(V2M_SYSREGS, SZ_4K)); v2m_populate_ct_desc(); ct_desc->map_io(); } @@ -515,6 +349,12 @@ static void __init v2m_init(void) regulator_register_fixed(0, v2m_eth_supplies, ARRAY_SIZE(v2m_eth_supplies)); + platform_device_register(&v2m_muxfpga_device); + platform_device_register(&v2m_shutdown_device); + platform_device_register(&v2m_reboot_device); + platform_device_register(&v2m_dvimode_device); + + platform_device_register(&v2m_sysreg_device); platform_device_register(&v2m_pcie_i2c_device); platform_device_register(&v2m_ddc_i2c_device); platform_device_register(&v2m_flash_device); @@ -525,7 +365,7 @@ static void __init v2m_init(void) for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++) amba_device_register(v2m_amba_devs[i], &iomem_resource); - pm_power_off = v2m_power_off; + pm_power_off = vexpress_power_off; ct_desc->init_tile(); } @@ -539,7 +379,7 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express") .timer = &v2m_timer, .handle_irq = gic_handle_irq, .init_machine = v2m_init, - .restart = v2m_restart, + .restart = vexpress_restart, MACHINE_END static struct map_desc v2m_rs1_io_desc __initdata = { @@ -580,20 +420,13 @@ void __init v2m_dt_map_io(void) void __init v2m_dt_init_early(void) { - struct device_node *node; u32 dt_hbi; - node = of_find_compatible_node(NULL, NULL, "arm,vexpress-sysreg"); - v2m_sysreg_base = of_iomap(node, 0); - if (WARN_ON(!v2m_sysreg_base)) - return; + vexpress_sysreg_of_early_init(); /* Confirm board type against DT property, if available */ if (of_property_read_u32(allnodes, "arm,hbi", &dt_hbi) == 0) { - int site = v2m_get_master_site(); - u32 id = readl(v2m_sysreg_base + (site == SYS_CFG_SITE_DB2 ? - V2M_SYS_PROCID1 : V2M_SYS_PROCID0)); - u32 hbi = id & SYS_PROCIDx_HBI_MASK; + u32 hbi = vexpress_get_hbi(VEXPRESS_SITE_MASTER); if (WARN_ON(dt_hbi != hbi)) pr_warning("vexpress: DT HBI (%x) is not matching " @@ -617,10 +450,7 @@ static void __init v2m_dt_timer_init(void) const char *path; int err; - node = of_find_compatible_node(NULL, NULL, "arm,sp810"); - v2m_sysctl_init(of_iomap(node, 0)); - - v2m_clk_init(); + vexpress_clk_of_init(); err = of_property_read_string(of_aliases, "arm,v2m_timer", &path); if (WARN_ON(err)) @@ -631,33 +461,29 @@ static void __init v2m_dt_timer_init(void) twd_local_timer_of_register(); if (arch_timer_sched_clock_init() != 0) - versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000); + versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), + 24000000); } static struct sys_timer v2m_dt_timer = { .init = v2m_dt_timer_init, }; -static struct of_dev_auxdata v2m_dt_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("arm,vexpress-flash", V2M_NOR0, "physmap-flash", - &v2m_flash_data), - OF_DEV_AUXDATA("arm,primecell", V2M_MMCI, "mb:mmci", &v2m_mmci_data), - /* RS1 memory map */ - OF_DEV_AUXDATA("arm,vexpress-flash", 0x08000000, "physmap-flash", - &v2m_flash_data), - OF_DEV_AUXDATA("arm,primecell", 0x1c050000, "mb:mmci", &v2m_mmci_data), +static const struct of_device_id v2m_dt_bus_match[] __initconst = { + { .compatible = "simple-bus", }, + { .compatible = "arm,amba-bus", }, + { .compatible = "arm,vexpress,config-bus", }, {} }; static void __init v2m_dt_init(void) { l2x0_of_init(0x00400000, 0xfe0fffff); - of_platform_populate(NULL, of_default_bus_match_table, - v2m_dt_auxdata_lookup, NULL); - pm_power_off = v2m_power_off; + of_platform_populate(NULL, v2m_dt_bus_match, NULL, NULL); + pm_power_off = vexpress_power_off; } -const static char *v2m_dt_match[] __initconst = { +static const char * const v2m_dt_match[] __initconst = { "arm,vexpress", "xen,xenvm", NULL, @@ -672,5 +498,5 @@ DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express") .timer = &v2m_dt_timer, .init_machine = v2m_dt_init, .handle_irq = gic_handle_irq, - .restart = v2m_restart, + .restart = vexpress_restart, MACHINE_END |