Merge with rsync://rsync.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6.git

42 files changed, 1195 insertions, 575 deletions

diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index e14278d..39a6c1b 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -24,48 +24,91 @@
 #include "entry-header.S"
 
 /*
+ * Interrupt handling.  Preserves r7, r8, r9
+ */
+	.macro	irq_handler
+1:	get_irqnr_and_base r0, r6, r5, lr
+	movne	r1, sp
+	@
+	@ routine called with r0 = irq number, r1 = struct pt_regs *
+	@
+	adrne	lr, 1b
+	bne	asm_do_IRQ
+
+#ifdef CONFIG_SMP
+	/*
+	 * XXX
+	 *
+	 * this macro assumes that irqstat (r6) and base (r5) are
+	 * preserved from get_irqnr_and_base above
+	 */
+	test_for_ipi r0, r6, r5, lr
+	movne	r0, sp
+	adrne	lr, 1b
+	bne	do_IPI
+#endif
+
+	.endm
+
+/*
  * Invalid mode handlers
  */
-	.macro	inv_entry, sym, reason
-	sub	sp, sp, #S_FRAME_SIZE		@ Allocate frame size in one go
-	stmia	sp, {r0 - lr}			@ Save XXX r0 - lr
-	ldr	r4, .LC\sym
+	.macro	inv_entry, reason
+	sub	sp, sp, #S_FRAME_SIZE
+	stmib	sp, {r1 - lr}
 	mov	r1, #\reason
 	.endm
 
 __pabt_invalid:
-	inv_entry abt, BAD_PREFETCH
-	b	1f
+	inv_entry BAD_PREFETCH
+	b	common_invalid
 
 __dabt_invalid:
-	inv_entry abt, BAD_DATA
-	b	1f
+	inv_entry BAD_DATA
+	b	common_invalid
 
 __irq_invalid:
-	inv_entry irq, BAD_IRQ
-	b	1f
+	inv_entry BAD_IRQ
+	b	common_invalid
 
 __und_invalid:
-	inv_entry und, BAD_UNDEFINSTR
+	inv_entry BAD_UNDEFINSTR
+
+	@
+	@ XXX fall through to common_invalid
+	@
+
+@
+@ common_invalid - generic code for failed exception (re-entrant version of handlers)
+@
+common_invalid:
+	zero_fp
+
+	ldmia	r0, {r4 - r6}
+	add	r0, sp, #S_PC		@ here for interlock avoidance
+	mov	r7, #-1			@  ""   ""    ""        ""
+	str	r4, [sp]		@ save preserved r0
+	stmia	r0, {r5 - r7}		@ lr_<exception>,
+					@ cpsr_<exception>, "old_r0"
 
-1:	zero_fp
-	ldmia	r4, {r5 - r7}			@ Get XXX pc, cpsr, old_r0
-	add	r4, sp, #S_PC
-	stmia	r4, {r5 - r7}			@ Save XXX pc, cpsr, old_r0
 	mov	r0, sp
-	and	r2, r6, #31			@ int mode
+	and	r2, r6, #0x1f
 	b	bad_mode
 
 /*
  * SVC mode handlers
  */
-	.macro	svc_entry, sym
+	.macro	svc_entry
 	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			@ save r0 - r12
-	ldr	r2, .LC\sym
-	add	r0, sp, #S_FRAME_SIZE
-	ldmia	r2, {r2 - r4}			@ get pc, cpsr
-	add	r5, sp, #S_SP
+	stmib	sp, {r1 - r12}
+
+	ldmia	r0, {r1 - r3}
+	add	r5, sp, #S_SP		@ here for interlock avoidance
+	mov	r4, #-1			@  ""  ""      ""       ""
+	add	r0, sp, #S_FRAME_SIZE   @  ""  ""      ""       ""
+	str	r1, [sp]		@ save the "real" r0 copied
+					@ from the exception stack
+
 	mov	r1, lr
 
 	@
@@ -82,7 +125,7 @@ __und_invalid:
 
 	.align	5
 __dabt_svc:
-	svc_entry abt
+	svc_entry
 
 	@
 	@ get ready to re-enable interrupts if appropriate
@@ -129,28 +172,24 @@ __dabt_svc:
 
 	.align	5
 __irq_svc:
-	svc_entry irq
+	svc_entry
+
 #ifdef CONFIG_PREEMPT
-	get_thread_info r8
-	ldr	r9, [r8, #TI_PREEMPT]		@ get preempt count
-	add	r7, r9, #1			@ increment it
-	str	r7, [r8, #TI_PREEMPT]
+	get_thread_info tsk
+	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
+	add	r7, r8, #1			@ increment it
+	str	r7, [tsk, #TI_PREEMPT]
 #endif
-1:	get_irqnr_and_base r0, r6, r5, lr
-	movne	r1, sp
-	@
-	@ routine called with r0 = irq number, r1 = struct pt_regs *
-	@
-	adrne	lr, 1b
-	bne	asm_do_IRQ
+
+	irq_handler
 #ifdef CONFIG_PREEMPT
-	ldr	r0, [r8, #TI_FLAGS]		@ get flags
+	ldr	r0, [tsk, #TI_FLAGS]		@ get flags
 	tst	r0, #_TIF_NEED_RESCHED
 	blne	svc_preempt
 preempt_return:
-	ldr	r0, [r8, #TI_PREEMPT]		@ read preempt value
+	ldr	r0, [tsk, #TI_PREEMPT]		@ read preempt value
+	str	r8, [tsk, #TI_PREEMPT]		@ restore preempt count
 	teq	r0, r7
-	str	r9, [r8, #TI_PREEMPT]		@ restore preempt count
 	strne	r0, [r0, -r0]			@ bug()
 #endif
 	ldr	r0, [sp, #S_PSR]		@ irqs are already disabled
@@ -161,7 +200,7 @@ preempt_return:
 
 #ifdef CONFIG_PREEMPT
 svc_preempt:
-	teq	r9, #0				@ was preempt count = 0
+	teq	r8, #0				@ was preempt count = 0
 	ldreq	r6, .LCirq_stat
 	movne	pc, lr				@ no
 	ldr	r0, [r6, #4]			@ local_irq_count
@@ -169,9 +208,9 @@ svc_preempt:
 	adds	r0, r0, r1
 	movne	pc, lr
 	mov	r7, #0				@ preempt_schedule_irq
-	str	r7, [r8, #TI_PREEMPT]		@ expects preempt_count == 0
+	str	r7, [tsk, #TI_PREEMPT]		@ expects preempt_count == 0
 1:	bl	preempt_schedule_irq		@ irq en/disable is done inside
-	ldr	r0, [r8, #TI_FLAGS]		@ get new tasks TI_FLAGS
+	ldr	r0, [tsk, #TI_FLAGS]		@ get new tasks TI_FLAGS
 	tst	r0, #_TIF_NEED_RESCHED
 	beq	preempt_return			@ go again
 	b	1b
@@ -179,7 +218,7 @@ svc_preempt:
 
 	.align	5
 __und_svc:
-	svc_entry und
+	svc_entry
 
 	@
 	@ call emulation code, which returns using r9 if it has emulated
@@ -209,7 +248,7 @@ __und_svc:
 
 	.align	5
 __pabt_svc:
-	svc_entry abt
+	svc_entry
 
 	@
 	@ re-enable interrupts if appropriate
@@ -242,12 +281,8 @@ __pabt_svc:
 	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
 
 	.align	5
-.LCirq:
-	.word	__temp_irq
-.LCund:
-	.word	__temp_und
-.LCabt:
-	.word	__temp_abt
+.LCcralign:
+	.word	cr_alignment
 #ifdef MULTI_ABORT
 .LCprocfns:
 	.word	processor
@@ -262,12 +297,16 @@ __pabt_svc:
 /*
  * User mode handlers
  */
-	.macro	usr_entry, sym
-	sub	sp, sp, #S_FRAME_SIZE		@ Allocate frame size in one go
-	stmia	sp, {r0 - r12}			@ save r0 - r12
-	ldr	r7, .LC\sym
-	add	r5, sp, #S_PC
-	ldmia	r7, {r2 - r4}			@ Get USR pc, cpsr
+	.macro	usr_entry
+	sub	sp, sp, #S_FRAME_SIZE
+	stmib	sp, {r1 - r12}
+
+	ldmia	r0, {r1 - r3}
+	add	r0, sp, #S_PC		@ here for interlock avoidance
+	mov	r4, #-1			@  ""  ""     ""        ""
+
+	str	r1, [sp]		@ save the "real" r0 copied
+					@ from the exception stack
 
 #if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
 	@ make sure our user space atomic helper is aborted
@@ -284,13 +323,13 @@ __pabt_svc:
 	@
 	@ Also, separately save sp_usr and lr_usr
 	@
-	stmia	r5, {r2 - r4}
-	stmdb	r5, {sp, lr}^
+	stmia	r0, {r2 - r4}
+	stmdb	r0, {sp, lr}^
 
 	@
 	@ Enable the alignment trap while in kernel mode
 	@
-	alignment_trap r7, r0, __temp_\sym
+	alignment_trap r0
 
 	@
 	@ Clear FP to mark the first stack frame
@@ -300,7 +339,7 @@ __pabt_svc:
 
 	.align	5
 __dabt_usr:
-	usr_entry abt
+	usr_entry
 
 	@
 	@ Call the processor-specific abort handler:
@@ -329,30 +368,23 @@ __dabt_usr:
 
 	.align	5
 __irq_usr:
-	usr_entry irq
+	usr_entry
 
+	get_thread_info tsk
 #ifdef CONFIG_PREEMPT
-	get_thread_info r8
-	ldr	r9, [r8, #TI_PREEMPT]		@ get preempt count
-	add	r7, r9, #1			@ increment it
-	str	r7, [r8, #TI_PREEMPT]
+	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
+	add	r7, r8, #1			@ increment it
+	str	r7, [tsk, #TI_PREEMPT]
 #endif
-1:	get_irqnr_and_base r0, r6, r5, lr
-	movne	r1, sp
-	adrne	lr, 1b
-	@
-	@ routine called with r0 = irq number, r1 = struct pt_regs *
-	@
-	bne	asm_do_IRQ
+
+	irq_handler
 #ifdef CONFIG_PREEMPT
-	ldr	r0, [r8, #TI_PREEMPT]
+	ldr	r0, [tsk, #TI_PREEMPT]
+	str	r8, [tsk, #TI_PREEMPT]
 	teq	r0, r7
-	str	r9, [r8, #TI_PREEMPT]
 	strne	r0, [r0, -r0]
-	mov	tsk, r8
-#else
-	get_thread_info tsk
 #endif
+
 	mov	why, #0
 	b	ret_to_user
 
@@ -360,7 +392,7 @@ __irq_usr:
 
 	.align	5
 __und_usr:
-	usr_entry und
+	usr_entry
 
 	tst	r3, #PSR_T_BIT			@ Thumb mode?
 	bne	fpundefinstr			@ ignore FP
@@ -476,7 +508,7 @@ fpundefinstr:
 
 	.align	5
 __pabt_usr:
-	usr_entry abt
+	usr_entry
 
 	enable_irq				@ Enable interrupts
 	mov	r0, r2				@ address (pc)
@@ -741,29 +773,41 @@ __kuser_helper_end:
  *
  * Common stub entry macro:
  *   Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
+ *
+ * SP points to a minimal amount of processor-private memory, the address
+ * of which is copied into r0 for the mode specific abort handler.
  */
-	.macro	vector_stub, name, sym, correction=0
+	.macro	vector_stub, name, correction=0
 	.align	5
 
 vector_\name:
-	ldr	r13, .LCs\sym
 	.if \correction
 	sub	lr, lr, #\correction
 	.endif
-	str	lr, [r13]			@ save lr_IRQ
+
+	@
+	@ Save r0, lr_<exception> (parent PC) and spsr_<exception>
+	@ (parent CPSR)
+	@
+	stmia	sp, {r0, lr}		@ save r0, lr
 	mrs	lr, spsr
-	str	lr, [r13, #4]			@ save spsr_IRQ
+	str	lr, [sp, #8]		@ save spsr
+
 	@
-	@ now branch to the relevant MODE handling routine
+	@ Prepare for SVC32 mode.  IRQs remain disabled.
 	@
-	mrs	r13, cpsr
-	bic	r13, r13, #MODE_MASK
-	orr	r13, r13, #SVC_MODE
-	msr	spsr_cxsf, r13			@ switch to SVC_32 mode
+	mrs	r0, cpsr
+	bic	r0, r0, #MODE_MASK
+	orr	r0, r0, #SVC_MODE
+	msr	spsr_cxsf, r0
 
-	and	lr, lr, #15
+	@
+	@ the branch table must immediately follow this code
+	@
+	mov	r0, sp
+	and	lr, lr, #0x0f
 	ldr	lr, [pc, lr, lsl #2]
-	movs	pc, lr				@ Changes mode and branches
+	movs	pc, lr			@ branch to handler in SVC mode
 	.endm
 
 	.globl	__stubs_start
@@ -771,7 +815,7 @@ __stubs_start:
 /*
  * Interrupt dispatcher
  */
-	vector_stub	irq, irq, 4
+	vector_stub	irq, 4
 
 	.long	__irq_usr			@  0  (USR_26 / USR_32)
 	.long	__irq_invalid			@  1  (FIQ_26 / FIQ_32)
@@ -794,7 +838,7 @@ __stubs_start:
  * Data abort dispatcher
  * Enter in ABT mode, spsr = USR CPSR, lr = USR PC
  */
-	vector_stub	dabt, abt, 8
+	vector_stub	dabt, 8
 
 	.long	__dabt_usr			@  0  (USR_26 / USR_32)
 	.long	__dabt_invalid			@  1  (FIQ_26 / FIQ_32)
@@ -817,7 +861,7 @@ __stubs_start:
  * Prefetch abort dispatcher
  * Enter in ABT mode, spsr = USR CPSR, lr = USR PC
  */
-	vector_stub	pabt, abt, 4
+	vector_stub	pabt, 4
 
 	.long	__pabt_usr			@  0 (USR_26 / USR_32)
 	.long	__pabt_invalid			@  1 (FIQ_26 / FIQ_32)
@@ -840,7 +884,7 @@ __stubs_start:
  * Undef instr entry dispatcher
  * Enter in UND mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
  */
-	vector_stub	und, und
+	vector_stub	und
 
 	.long	__und_usr			@  0 (USR_26 / USR_32)
 	.long	__und_invalid			@  1 (FIQ_26 / FIQ_32)
@@ -894,13 +938,6 @@ vector_addrexcptn:
 .LCvswi:
 	.word	vector_swi
 
-.LCsirq:
-	.word	__temp_irq
-.LCsund:
-	.word	__temp_und
-.LCsabt:
-	.word	__temp_abt
-
 	.globl	__stubs_end
 __stubs_end:
 
@@ -922,23 +959,6 @@ __vectors_end:
 
 	.data
 
-/*
- * Do not reorder these, and do not insert extra data between...
- */
-
-__temp_irq:
-	.word	0				@ saved lr_irq
-	.word	0				@ saved spsr_irq
-	.word	-1				@ old_r0
-__temp_und:
-	.word	0				@ Saved lr_und
-	.word	0				@ Saved spsr_und
-	.word	-1				@ old_r0
-__temp_abt:
-	.word	0				@ Saved lr_abt
-	.word	0				@ Saved spsr_abt
-	.word	-1				@ old_r0
-
 	.globl	cr_alignment
 	.globl	cr_no_alignment
 cr_alignment:
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index a3d40a0..afef212 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -59,11 +59,10 @@
 	mov	\rd, \rd, lsl #13
 	.endm
 
-	.macro	alignment_trap, rbase, rtemp, sym
+	.macro	alignment_trap, rtemp
 #ifdef CONFIG_ALIGNMENT_TRAP
-#define OFF_CR_ALIGNMENT(x)	cr_alignment - x
-
-	ldr	\rtemp, [\rbase, #OFF_CR_ALIGNMENT(\sym)]
+	ldr	\rtemp, .LCcralign
+	ldr	\rtemp, [\rtemp]
 	mcr	p15, 0, \rtemp, c1, c0
 #endif
 	.endm
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 4733877..bd4823c 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -2,6 +2,8 @@
  *  linux/arch/arm/kernel/head.S
  *
  *  Copyright (C) 1994-2002 Russell King
+ *  Copyright (c) 2003 ARM Limited
+ *  All Rights Reserved
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -165,6 +167,48 @@ __mmap_switched:
 	stmia	r6, {r0, r4}			@ Save control register values
 	b	start_kernel
 
+#if defined(CONFIG_SMP)
+	.type   secondary_startup, #function
+ENTRY(secondary_startup)
+	/*
+	 * Common entry point for secondary CPUs.
+	 *
+	 * Ensure that we're in SVC mode, and IRQs are disabled.  Lookup
+	 * the processor type - there is no need to check the machine type
+	 * as it has already been validated by the primary processor.
+	 */
+	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC
+	bl	__lookup_processor_type
+	movs	r10, r5				@ invalid processor?
+	moveq	r0, #'p'			@ yes, error 'p'
+	beq	__error
+
+	/*
+	 * Use the page tables supplied from  __cpu_up.
+	 */
+	adr	r4, __secondary_data
+	ldmia	r4, {r5, r6, r13}		@ address to jump to after
+	sub	r4, r4, r5			@ mmu has been enabled
+	ldr	r4, [r6, r4]			@ get secondary_data.pgdir
+	adr	lr, __enable_mmu		@ return address
+	add	pc, r10, #12			@ initialise processor
+						@ (return control reg)
+
+	/*
+	 * r6  = &secondary_data
+	 */
+ENTRY(__secondary_switched)
+	ldr	sp, [r6, #4]			@ get secondary_data.stack
+	mov	fp, #0
+	b	secondary_start_kernel
+
+	.type	__secondary_data, %object
+__secondary_data:
+	.long	.
+	.long	secondary_data
+	.long	__secondary_switched
+#endif /* defined(CONFIG_SMP) */
+
 
 
 /*
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index c2a7da3..9fed5fa 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -92,6 +92,14 @@ struct cpu_user_fns cpu_user;
 struct cpu_cache_fns cpu_cache;
 #endif
 
+struct stack {
+	u32 irq[3];
+	u32 abt[3];
+	u32 und[3];
+} ____cacheline_aligned;
+
+static struct stack stacks[NR_CPUS];
+
 char elf_platform[ELF_PLATFORM_SIZE];
 EXPORT_SYMBOL(elf_platform);
 
@@ -307,8 +315,6 @@ static void __init setup_processor(void)
 	       cpu_name, processor_id, (int)processor_id & 15,
 	       proc_arch[cpu_architecture()]);
 
-	dump_cpu_info(smp_processor_id());
-
 	sprintf(system_utsname.machine, "%s%c", list->arch_name, ENDIANNESS);
 	sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
 	elf_hwcap = list->elf_hwcap;
@@ -316,6 +322,46 @@ static void __init setup_processor(void)
 	cpu_proc_init();
 }
 
+/*
+ * cpu_init - initialise one CPU.
+ *
+ * cpu_init dumps the cache information, initialises SMP specific
+ * information, and sets up the per-CPU stacks.
+ */
+void cpu_init(void)
+{
+	unsigned int cpu = smp_processor_id();
+	struct stack *stk = &stacks[cpu];
+
+	if (cpu >= NR_CPUS) {
+		printk(KERN_CRIT "CPU%u: bad primary CPU number\n", cpu);
+		BUG();
+	}
+
+	dump_cpu_info(cpu);
+
+	/*
+	 * setup stacks for re-entrant exception handlers
+	 */
+	__asm__ (
+	"msr	cpsr_c, %1\n\t"
+	"add	sp, %0, %2\n\t"
+	"msr	cpsr_c, %3\n\t"
+	"add	sp, %0, %4\n\t"
+	"msr	cpsr_c, %5\n\t"
+	"add	sp, %0, %6\n\t"
+	"msr	cpsr_c, %7"
+	    :
+	    : "r" (stk),
+	      "I" (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
+	      "I" (offsetof(struct stack, irq[0])),
+	      "I" (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
+	      "I" (offsetof(struct stack, abt[0])),
+	      "I" (PSR_F_BIT | PSR_I_BIT | UND_MODE),
+	      "I" (offsetof(struct stack, und[0])),
+	      "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE));
+}
+
 static struct machine_desc * __init setup_machine(unsigned int nr)
 {
 	struct machine_desc *list;
@@ -715,6 +761,8 @@ void __init setup_arch(char **cmdline_p)
 	paging_init(&meminfo, mdesc);
 	request_standard_resources(&meminfo, mdesc);
 
+	cpu_init();
+
 	/*
 	 * Set up various architecture-specific pointers
 	 */
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index ecc8c33..45ed036 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -24,6 +24,9 @@
 #include <asm/atomic.h>
 #include <asm/cacheflush.h>
 #include <asm/cpu.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
 #include <asm/processor.h>
 #include <asm/tlbflush.h>
 #include <asm/ptrace.h>
@@ -37,6 +40,13 @@ cpumask_t cpu_present_mask;
 cpumask_t cpu_online_map;
 
 /*
+ * as from 2.5, kernels no longer have an init_tasks structure
+ * so we need some other way of telling a new secondary core
+ * where to place its SVC stack
+ */
+struct secondary_data secondary_data;
+
+/*
  * structures for inter-processor calls
  * - A collection of single bit ipi messages.
  */
@@ -71,6 +81,8 @@ static DEFINE_SPINLOCK(smp_call_function_lock);
 int __init __cpu_up(unsigned int cpu)
 {
 	struct task_struct *idle;
+	pgd_t *pgd;
+	pmd_t *pmd;
 	int ret;
 
 	/*
@@ -84,9 +96,54 @@ int __init __cpu_up(unsigned int cpu)
 	}
 
 	/*
+	 * Allocate initial page tables to allow the new CPU to
+	 * enable the MMU safely.  This essentially means a set
+	 * of our "standard" page tables, with the addition of
+	 * a 1:1 mapping for the physical address of the kernel.
+	 */
+	pgd = pgd_alloc(&init_mm);
+	pmd = pmd_offset(pgd, PHYS_OFFSET);
+	*pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) |
+		     PMD_TYPE_SECT | PMD_SECT_AP_WRITE);
+
+	/*
+	 * We need to tell the secondary core where to find
+	 * its stack and the page tables.
+	 */
+	secondary_data.stack = (void *)idle->thread_info + THREAD_SIZE - 8;
+	secondary_data.pgdir = virt_to_phys(pgd);
+	wmb();
+
+	/*
 	 * Now bring the CPU into our world.
 	 */
 	ret = boot_secondary(cpu, idle);
+	if (ret == 0) {
+		unsigned long timeout;
+
+		/*
+		 * CPU was successfully started, wait for it
+		 * to come online or time out.
+		 */
+		timeout = jiffies + HZ;
+		while (time_before(jiffies, timeout)) {
+			if (cpu_online(cpu))
+				break;
+
+			udelay(10);
+			barrier();
+		}
+
+		if (!cpu_online(cpu))
+			ret = -EIO;
+	}
+
+	secondary_data.stack = 0;
+	secondary_data.pgdir = 0;
+
+	*pmd_offset(pgd, PHYS_OFFSET) = __pmd(0);
+	pgd_free(pgd);
+
 	if (ret) {
 		printk(KERN_CRIT "cpu_up: processor %d failed to boot\n", cpu);
 		/*
@@ -98,6 +155,56 @@ int __init __cpu_up(unsigned int cpu)
 }
 
 /*
+ * This is the secondary CPU boot entry.  We're using this CPUs
+ * idle thread stack, but a set of temporary page tables.
+ */
+asmlinkage void __init secondary_start_kernel(void)
+{
+	struct mm_struct *mm = &init_mm;
+	unsigned int cpu = smp_processor_id();
+
+	printk("CPU%u: Booted secondary processor\n", cpu);
+
+	/*
+	 * All kernel threads share the same mm context; grab a
+	 * reference and switch to it.
+	 */
+	atomic_inc(&mm->mm_users);
+	atomic_inc(&mm->mm_count);
+	current->active_mm = mm;
+	cpu_set(cpu, mm->cpu_vm_mask);
+	cpu_switch_mm(mm->pgd, mm);
+	enter_lazy_tlb(mm, current);
+
+	cpu_init();
+
+	/*
+	 * Give the platform a chance to do its own initialisation.
+	 */
+	platform_secondary_init(cpu);
+
+	/*
+	 * Enable local interrupts.
+	 */
+	local_irq_enable();
+	local_fiq_enable();
+
+	calibrate_delay();
+
+	smp_store_cpu_info(cpu);
+
+	/*
+	 * OK, now it's safe to let the boot CPU continue
+	 */
+	cpu_set(cpu, cpu_online_map);
+
+	/*
+	 * OK, it's off to the idle thread for us
+	 */
+	cpu_idle();
+}
+
+/*
  * Called by both boot and secondaries to move global data into
  * per-processor storage.
  */
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
index 158daaf..ebb255b 100644
--- a/arch/arm/mach-integrator/Makefile
+++ b/arch/arm/mach-integrator/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_LEDS)			+= leds.o
 obj-$(CONFIG_PCI)			+= pci_v3.o pci.o
 obj-$(CONFIG_CPU_FREQ_INTEGRATOR)	+= cpu.o
 obj-$(CONFIG_INTEGRATOR_IMPD1)		+= impd1.o
+obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index bd17b51..d302f04 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -14,6 +14,7 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
+#include <linux/smp.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
@@ -221,7 +222,24 @@ integrator_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	 */
 	timer1->TimerClear = 1;
 
-	timer_tick(regs);
+	/*
+	 * the clock tick routines are only processed on the
+	 * primary CPU
+	 */
+	if (hard_smp_processor_id() == 0) {
+		nmi_tick();
+		timer_tick(regs);
+#ifdef CONFIG_SMP
+		smp_send_timer();
+#endif
+	}
+
+#ifdef CONFIG_SMP
+	/*
+	 * this is the ARM equivalent of the APIC timer interrupt
+	 */
+	update_process_times(user_mode(regs));
+#endif /* CONFIG_SMP */
 
 	write_sequnlock(&xtime_lock);
 
diff --git a/arch/arm/mach-integrator/headsmp.S b/arch/arm/mach-integrator/headsmp.S
new file mode 100644
index 0000000..ceaa88e
--- /dev/null
+++ b/arch/arm/mach-integrator/headsmp.S
@@ -0,0 +1,37 @@
+/*
+ *  linux/arch/arm/mach-integrator/headsmp.S
+ *
+ *  Copyright (c) 2003 ARM Limited
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+	__INIT
+
+/*
+ * Integrator specific entry point for secondary CPUs.  This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(integrator_secondary_startup)
+	adr	r4, 1f
+	ldmia	r4, {r5, r6}
+	sub	r4, r4, r5
+	ldr	r6, [r6, r4]
+pen:	ldr	r7, [r6]
+	cmp	r7, r0
+	bne	pen
+
+	/*
+	 * we've been released from the holding pen: secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+
+1:	.long	.
+	.long	phys_pen_release
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 3b948e8..e0a01ee 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -83,7 +83,6 @@ static struct map_desc intcp_io_desc[] __initdata = {
  { IO_ADDRESS(INTEGRATOR_UART1_BASE), INTEGRATOR_UART1_BASE, SZ_4K,  MT_DEVICE },
  { IO_ADDRESS(INTEGRATOR_DBG_BASE),   INTEGRATOR_DBG_BASE,   SZ_4K,  MT_DEVICE },
  { IO_ADDRESS(INTEGRATOR_GPIO_BASE),  INTEGRATOR_GPIO_BASE,  SZ_4K,  MT_DEVICE },
- { 0xfc900000, 0xc9000000, SZ_4K, MT_DEVICE },
  { 0xfca00000, 0xca000000, SZ_4K, MT_DEVICE },
  { 0xfcb00000, 0xcb000000, SZ_4K, MT_DEVICE },
 };
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index d2c0ab2..f1436e6 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -22,6 +22,8 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
@@ -85,4 +87,4 @@ static int __init leds_init(void)
 	return 0;
 }
 
-__initcall(leds_init);
+core_initcall(leds_init);
diff --git a/arch/arm/mach-integrator/platsmp.c b/arch/arm/mach-integrator/platsmp.c
new file mode 100644
index 0000000..ead15df
--- /dev/null
+++ b/arch/arm/mach-integrator/platsmp.c
@@ -0,0 +1,192 @@
+/*
+ *  linux/arch/arm/mach-cintegrator/platsmp.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+
+#include <asm/atomic.h>
+#include <asm/delay.h>
+#include <asm/mmu_context.h>
+#include <asm/procinfo.h>
+#include <asm/ptrace.h>
+#include <asm/smp.h>
+
+extern void integrator_secondary_startup(void);
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __initdata pen_release = -1;
+unsigned long __initdata phys_pen_release = 0;
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __init platform_secondary_init(unsigned int cpu)
+{
+	/*
+	 * the primary core may have used a "cross call" soft interrupt
+	 * to get this processor out of WFI in the BootMonitor - make
+	 * sure that we are no longer being sent this soft interrupt
+	 */
+	smp_cross_call_done(cpumask_of_cpu(cpu));
+
+	/*
+	 * if any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+	secondary_scan_irqs();
+
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	pen_release = -1;
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int __init boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * The secondary processor is waiting to be released from
+	 * the holding pen - release it, then wait for it to flag
+	 * that it has been released by resetting pen_release.
+	 *
+	 * Note that "pen_release" is the hardware CPU ID, whereas
+	 * "cpu" is Linux's internal ID.
+	 */
+	pen_release = cpu;
+
+	/*
+	 * XXX
+	 *
+	 * This is a later addition to the booting protocol: the
+	 * bootMonitor now puts secondary cores into WFI, so
+	 * poke_milo() no longer gets the cores moving; we need
+	 * to send a soft interrupt to wake the secondary core.
+	 * Use smp_cross_call() for this, since there's little
+	 * point duplicating the code here
+	 */
+	smp_cross_call(cpumask_of_cpu(cpu));
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		if (pen_release == -1)
+			break;
+
+		udelay(10);
+	}
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return pen_release != -1 ? -ENOSYS : 0;
+}
+
+static void __init poke_milo(void)
+{
+	extern void secondary_startup(void);
+
+	/* nobody is to be released from the pen yet */
+	pen_release = -1;
+
+	phys_pen_release = virt_to_phys(&pen_release);
+
+	/*
+	 * write the address of secondary startup into the system-wide
+	 * flags register, then clear the bottom two bits, which is what
+	 * BootMonitor is waiting for
+	 */
+#if 1
+#define CINTEGRATOR_HDR_FLAGSS_OFFSET 0x30
+	__raw_writel(virt_to_phys(integrator_secondary_startup),
+		     (IO_ADDRESS(INTEGRATOR_HDR_BASE) +
+		      CINTEGRATOR_HDR_FLAGSS_OFFSET));
+#define CINTEGRATOR_HDR_FLAGSC_OFFSET 0x34
+	__raw_writel(3,
+		     (IO_ADDRESS(INTEGRATOR_HDR_BASE) +
+		      CINTEGRATOR_HDR_FLAGSC_OFFSET));
+#endif
+
+	mb();
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned int ncores = get_core_count();
+	unsigned int cpu = smp_processor_id();
+	int i;
+
+	/* sanity check */
+	if (ncores == 0) {
+		printk(KERN_ERR
+		       "Integrator/CP: strange CM count of 0? Default to 1\n");
+
+		ncores = 1;
+	}
+
+	if (ncores > NR_CPUS) {
+		printk(KERN_WARNING
+		       "Integrator/CP: no. of cores (%d) greater than configured "
+		       "maximum of %d - clipping\n",
+		       ncores, NR_CPUS);
+		ncores = NR_CPUS;
+	}
+
+	/*
+	 * start with some more config for the Boot CPU, now that
+	 * the world is a bit more alive (which was not the case
+	 * when smp_prepare_boot_cpu() was called)
+	 */
+	smp_store_cpu_info(cpu);
+
+	/*
+	 * are we trying to boot more cores than exist?
+	 */
+	if (max_cpus > ncores)
+		max_cpus = ncores;
+
+	/*
+	 * Initialise the present mask - this tells us which CPUs should
+	 * be present.
+	 */
+	for (i = 0; i < max_cpus; i++) {
+		cpu_set(i, cpu_present_mask);
+	}
+
+	/*
+	 * Do we need any more CPUs? If so, then let them know where
+	 * to start. Note that, on modern versions of MILO, the "poke"
+	 * doesn't actually do anything until each individual core is
+	 * sent a soft interrupt to get it out of WFI
+	 */
+	if (max_cpus > 1)
+		poke_milo();
+}
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index dd012d6..f2c9e0d 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/sysdev.h>
 #include <linux/major.h>
 #include <linux/fb.h>
 #include <linux/interrupt.h>
@@ -106,6 +107,35 @@ static void __init lubbock_init_irq(void)
 	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
 }
 
+#ifdef CONFIG_PM
+
+static int lubbock_irq_resume(struct sys_device *dev)
+{
+	LUB_IRQ_MASK_EN = lubbock_irq_enabled;
+	return 0;
+}
+
+static struct sysdev_class lubbock_irq_sysclass = {
+	set_kset_name("cpld_irq"),
+	.resume = lubbock_irq_resume,
+};
+
+static struct sys_device lubbock_irq_device = {
+	.cls = &lubbock_irq_sysclass,
+};
+
+static int __init lubbock_irq_device_init(void)
+{
+	int ret = sysdev_class_register(&lubbock_irq_sysclass);
+	if (ret == 0)
+		ret = sysdev_register(&lubbock_irq_device);
+	return ret;
+}
+
+device_initcall(lubbock_irq_device_init);
+
+#endif
+
 static int lubbock_udc_is_connected(void)
 {
 	return (LUB_MISC_RD & (1 << 9)) == 0;
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 6823ae2..9896afc 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -15,6 +15,7 @@
 
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/sysdev.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/bitops.h>
@@ -62,7 +63,6 @@ static struct irqchip mainstone_irq_chip = {
 	.unmask		= mainstone_unmask_irq,
 };
 
-
 static void mainstone_irq_handler(unsigned int irq, struct irqdesc *desc,
 				  struct pt_regs *regs)
 {
@@ -100,6 +100,35 @@ static void __init mainstone_init_irq(void)
 	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
 }
 
+#ifdef CONFIG_PM
+
+static int mainstone_irq_resume(struct sys_device *dev)
+{
+	MST_INTMSKENA = mainstone_irq_enabled;
+	return 0;
+}
+
+static struct sysdev_class mainstone_irq_sysclass = {
+	set_kset_name("cpld_irq"),
+	.resume = mainstone_irq_resume,
+};
+
+static struct sys_device mainstone_irq_device = {
+	.cls = &mainstone_irq_sysclass,
+};
+
+static int __init mainstone_irq_device_init(void)
+{
+	int ret = sysdev_class_register(&mainstone_irq_sysclass);
+	if (ret == 0)
+		ret = sysdev_register(&mainstone_irq_device);
+	return ret;
+}
+
+device_initcall(mainstone_irq_device_init);
+
+#endif
+
 
 static struct resource smc91x_resources[] = {
 	[0] = {
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 9799fe8..ac4dd43 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -133,6 +133,8 @@ static int pxa_pm_enter(suspend_state_t state)
 	/* *** go zzz *** */
 	pxa_cpu_pm_enter(state);
 
+	cpu_init();
+
 	/* after sleeping, validate the checksum */
 	checksum = 0;
 	for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++)
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index b6d945a..7869c3b 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -16,6 +16,7 @@
  * initialization stuff for PXA machines which can be overridden later if
  * need be.
  */
+#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -103,6 +104,7 @@ unsigned int get_lcdclk_frequency_10khz(void)
 
 EXPORT_SYMBOL(get_lcdclk_frequency_10khz);
 
+#ifdef CONFIG_PM
 
 int pxa_cpu_pm_prepare(suspend_state_t state)
 {
@@ -131,3 +133,5 @@ void pxa_cpu_pm_enter(suspend_state_t state)
 		break;
 	}
 }
+
+#endif
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index aa3c3b2..893964f 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -120,6 +120,8 @@ EXPORT_SYMBOL(get_clk_frequency_khz);
 EXPORT_SYMBOL(get_memclk_frequency_10khz);
 EXPORT_SYMBOL(get_lcdclk_frequency_10khz);
 
+#ifdef CONFIG_PM
+
 int pxa_cpu_pm_prepare(suspend_state_t state)
 {
 	switch (state) {
@@ -153,6 +155,8 @@ void pxa_cpu_pm_enter(suspend_state_t state)
 	}
 }
 
+#endif
+
 /*
  * device registration specific to PXA27x.
  */
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index 379ea5e..59c7964 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -88,6 +88,8 @@ static int sa11x0_pm_enter(suspend_state_t state)
 	/* go zzz */
 	sa1100_cpu_suspend();
 
+	cpu_init();
+
 	/*
 	 * Ensure not to come back here if it wasn't intended
 	 */
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 554e1bd..302c2a7 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -543,7 +543,7 @@ static void versatile_clcd_enable(struct clcd_fb *fb)
 		val |= SYS_CLCD_MODE_5551;
 		break;
 	case 6:
-		val |= SYS_CLCD_MODE_565_BLSB;
+		val |= SYS_CLCD_MODE_565_RLSB;
 		break;
 	case 8:
 		val |= SYS_CLCD_MODE_888;
diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c
index 45641a8..0ff65ab 100644
--- a/arch/i386/kernel/apm.c
+++ b/arch/i386/kernel/apm.c
@@ -1222,6 +1222,7 @@ static int suspend(int vetoable)
 
 	save_processor_state();
 	err = set_system_power_state(APM_STATE_SUSPEND);
+	ignore_normal_resume = 1;
 	restore_processor_state();
 
 	local_irq_disable();
@@ -1229,7 +1230,6 @@ static int suspend(int vetoable)
 	spin_lock(&i8253_lock);
 	reinit_timer();
 	set_time();
-	ignore_normal_resume = 1;
 
 	spin_unlock(&i8253_lock);
 	write_sequnlock(&xtime_lock);
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 6e6377a..54ce6da 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -1083,6 +1083,23 @@ source "drivers/zorro/Kconfig"
 
 source kernel/power/Kconfig
 
+config SECCOMP
+	bool "Enable seccomp to safely compute untrusted bytecode"
+	depends on PROC_FS
+	default y
+	help
+	  This kernel feature is useful for number crunching applications
+	  that may need to compute untrusted bytecode during their
+	  execution. By using pipes or other transports made available to
+	  the process as file descriptors supporting the read/write
+	  syscalls, it's possible to isolate those applications in
+	  their own address space using seccomp. Once seccomp is
+	  enabled via /proc/<pid>/seccomp, it cannot be disabled
+	  and the task is only allowed to execute a few safe syscalls
+	  defined by each seccomp mode.
+
+	  If unsure, say Y. Only embedded should say N here.
+
 endmenu
 
 config ISA_DMA_API
diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S
index 5f075db..6615237 100644
--- a/arch/ppc/kernel/entry.S
+++ b/arch/ppc/kernel/entry.S
@@ -202,7 +202,7 @@ _GLOBAL(DoSyscall)
 	rlwinm	r11,r11,0,~_TIFL_FORCE_NOERROR
 	stw	r11,TI_LOCAL_FLAGS(r10)
 	lwz	r11,TI_FLAGS(r10)
-	andi.	r11,r11,_TIF_SYSCALL_TRACE
+	andi.	r11,r11,_TIF_SYSCALL_T_OR_A
 	bne-	syscall_dotrace
 syscall_dotrace_cont:
 	cmplwi	0,r0,NR_syscalls
@@ -237,7 +237,7 @@ ret_from_syscall:
 	SYNC
 	MTMSRD(r10)
 	lwz	r9,TI_FLAGS(r12)
-	andi.	r0,r9,(_TIF_SYSCALL_TRACE|_TIF_SIGPENDING|_TIF_NEED_RESCHED)
+	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED)
 	bne-	syscall_exit_work
 syscall_exit_cont:
 #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
@@ -277,7 +277,8 @@ syscall_dotrace:
 	SAVE_NVGPRS(r1)
 	li	r0,0xc00
 	stw	r0,TRAP(r1)
-	bl	do_syscall_trace
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	do_syscall_trace_enter
 	lwz	r0,GPR0(r1)	/* Restore original registers */
 	lwz	r3,GPR3(r1)
 	lwz	r4,GPR4(r1)
@@ -291,7 +292,7 @@ syscall_dotrace:
 syscall_exit_work:
 	stw	r6,RESULT(r1)	/* Save result */
 	stw	r3,GPR3(r1)	/* Update return value */
-	andi.	r0,r9,_TIF_SYSCALL_TRACE
+	andi.	r0,r9,_TIF_SYSCALL_T_OR_A
 	beq	5f
 	ori	r10,r10,MSR_EE
 	SYNC
@@ -303,7 +304,8 @@ syscall_exit_work:
 	li	r4,0xc00
 	stw	r4,TRAP(r1)
 4:
-	bl	do_syscall_trace
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	do_syscall_trace_leave
 	REST_NVGPRS(r1)
 2:
 	lwz	r3,GPR3(r1)
@@ -627,8 +629,8 @@ sigreturn_exit:
 	subi	r1,r3,STACK_FRAME_OVERHEAD
 	rlwinm	r12,r1,0,0,18	/* current_thread_info() */
 	lwz	r9,TI_FLAGS(r12)
-	andi.	r0,r9,_TIF_SYSCALL_TRACE
-	bnel-	do_syscall_trace
+	andi.	r0,r9,_TIF_SYSCALL_T_OR_A
+	bnel-	do_syscall_trace_leave
 	/* fall through */
 
 	.globl	ret_from_except_full
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index 2ccb58f..d59ad07 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -55,7 +55,6 @@
 #define EXPORT_SYMTAB_STROPS
 
 extern void transfer_to_handler(void);
-extern void do_syscall_trace(void);
 extern void do_IRQ(struct pt_regs *regs);
 extern void MachineCheckException(struct pt_regs *regs);
 extern void AlignmentException(struct pt_regs *regs);
@@ -74,7 +73,6 @@ extern unsigned long mm_ptov (unsigned long paddr);
 EXPORT_SYMBOL(clear_pages);
 EXPORT_SYMBOL(clear_user_page);
 EXPORT_SYMBOL(do_signal);
-EXPORT_SYMBOL(do_syscall_trace);
 EXPORT_SYMBOL(transfer_to_handler);
 EXPORT_SYMBOL(do_IRQ);
 EXPORT_SYMBOL(MachineCheckException);
diff --git a/arch/ppc/kernel/ptrace.c b/arch/ppc/kernel/ptrace.c
index 59d59a8..e7aee41 100644
--- a/arch/ppc/kernel/ptrace.c
+++ b/arch/ppc/kernel/ptrace.c
@@ -27,6 +27,9 @@
 #include <linux/user.h>
 #include <linux/security.h>
 #include <linux/signal.h>
+#include <linux/seccomp.h>
+#include <linux/audit.h>
+#include <linux/module.h>
 
 #include <asm/uaccess.h>
 #include <asm/page.h>
@@ -455,11 +458,10 @@ out:
 	return ret;
 }
 
-void do_syscall_trace(void)
+static void do_syscall_trace(void)
 {
-        if (!test_thread_flag(TIF_SYSCALL_TRACE)
-	    || !(current->ptrace & PT_PTRACED))
-		return;
+	/* the 0x80 provides a way for the tracing parent to distinguish
+	   between a syscall stop and SIGTRAP delivery */
 	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
 				 ? 0x80 : 0));
 
@@ -473,3 +475,33 @@ void do_syscall_trace(void)
 		current->exit_code = 0;
 	}
 }
+
+void do_syscall_trace_enter(struct pt_regs *regs)
+{
+	if (test_thread_flag(TIF_SYSCALL_TRACE)
+	    && (current->ptrace & PT_PTRACED))
+		do_syscall_trace();
+
+	if (unlikely(current->audit_context))
+		audit_syscall_entry(current, AUDIT_ARCH_PPC,
+				    regs->gpr[0],
+				    regs->gpr[3], regs->gpr[4],
+				    regs->gpr[5], regs->gpr[6]);
+}
+
+void do_syscall_trace_leave(struct pt_regs *regs)
+{
+	secure_computing(regs->gpr[0]);
+
+	if (unlikely(current->audit_context))
+		audit_syscall_exit(current,
+				   (regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS,
+				   regs->result);
+
+	if ((test_thread_flag(TIF_SYSCALL_TRACE))
+	    && (current->ptrace & PT_PTRACED))
+		do_syscall_trace();
+}
+
+EXPORT_SYMBOL(do_syscall_trace_enter);
+EXPORT_SYMBOL(do_syscall_trace_leave);
diff --git a/arch/ppc64/configs/g5_defconfig b/arch/ppc64/configs/g5_defconfig
index 0f90df0..1eb3339 100644
--- a/arch/ppc64/configs/g5_defconfig
+++ b/arch/ppc64/configs/g5_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11
-# Thu Mar 10 16:47:04 2005
+# Linux kernel version: 2.6.12-rc6
+# Tue Jun 14 16:59:20 2005
 #
 CONFIG_64BIT=y
 CONFIG_MMU=y
@@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
-CONFIG_FRAME_POINTER=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 
 #
@@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -31,19 +32,20 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=17
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
@@ -87,6 +89,8 @@ CONFIG_NR_CPUS=2
 # CONFIG_SCHED_SMT is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
 
 #
 # General setup
@@ -97,6 +101,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_PCI_LEGACY_PROC=y
 CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 # CONFIG_HOTPLUG_CPU is not set
 
 #
@@ -105,10 +110,6 @@ CONFIG_PCI_NAMES=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -293,7 +294,6 @@ CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
@@ -301,7 +301,6 @@ CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=y
@@ -310,6 +309,7 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -332,6 +332,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
 
 #
 # Fusion MPT device support
@@ -394,7 +395,6 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 CONFIG_NET_KEY=m
 CONFIG_INET=y
@@ -564,6 +564,8 @@ CONFIG_E1000=y
 # CONFIG_R8169 is not set
 # CONFIG_SK98LIN is not set
 CONFIG_TIGON3=m
+# CONFIG_BNX2 is not set
+# CONFIG_MV643XX_ETH is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -631,18 +633,6 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
@@ -660,6 +650,16 @@ CONFIG_INPUT_MOUSE=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -676,6 +676,7 @@ CONFIG_HW_CONSOLE=y
 # Non-8250 serial port support
 #
 # CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -698,9 +699,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Ftape, the floppy tape device driver
 #
+CONFIG_AGP=m
+CONFIG_AGP_UNINORTH=m
 # CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
 
 #
 # TPM devices
@@ -730,12 +734,11 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_ISA is not set
 CONFIG_I2C_KEYWEST=y
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
 # CONFIG_SCx200_ACB is not set
@@ -772,6 +775,7 @@ CONFIG_I2C_KEYWEST=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
@@ -785,6 +789,7 @@ CONFIG_I2C_KEYWEST=y
 #
 # Other I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -817,6 +822,11 @@ CONFIG_I2C_KEYWEST=y
 # Graphics support
 #
 CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+CONFIG_FB_MACMODES=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_CIRRUS is not set
@@ -830,6 +840,7 @@ CONFIG_FB_OF=y
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 # CONFIG_FB_VGA16 is not set
+# CONFIG_FB_NVIDIA is not set
 CONFIG_FB_RIVA=y
 # CONFIG_FB_RIVA_I2C is not set
 # CONFIG_FB_RIVA_DEBUG is not set
@@ -847,6 +858,7 @@ CONFIG_FB_RADEON_I2C=y
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -880,6 +892,8 @@ CONFIG_LCD_DEVICE=y
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -890,8 +904,6 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 
 #
 # USB Host Controller Drivers
@@ -917,7 +929,6 @@ CONFIG_USB_PRINTER=y
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_RW_DETECT=y
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
 CONFIG_USB_STORAGE_ISD200=y
@@ -1004,8 +1015,10 @@ CONFIG_USB_MON=y
 #
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
 CONFIG_USB_SERIAL_BELKIN=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -1034,6 +1047,7 @@ CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
 CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
 CONFIG_USB_SERIAL_SAFE_PADDED=y
 CONFIG_USB_SERIAL_TI=m
@@ -1270,11 +1284,13 @@ CONFIG_OPROFILE=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_PRINTK_TIME is not set
+CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
diff --git a/arch/ppc64/configs/iSeries_defconfig b/arch/ppc64/configs/iSeries_defconfig
index a39e9d2..f6a2b99 100644
--- a/arch/ppc64/configs/iSeries_defconfig
+++ b/arch/ppc64/configs/iSeries_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc3-bk6
-# Wed Feb  9 23:34:52 2005
+# Linux kernel version: 2.6.12-rc6
+# Tue Jun 14 17:01:28 2005
 #
 CONFIG_64BIT=y
 CONFIG_MMU=y
@@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
-CONFIG_FRAME_POINTER=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 
 #
@@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -30,24 +31,29 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=17
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -79,6 +85,8 @@ CONFIG_NR_CPUS=32
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_MSCHUNKS=y
 CONFIG_LPARCFG=y
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
 
 #
 # General setup
@@ -89,6 +97,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_PCI_LEGACY_PROC=y
 CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -96,10 +105,6 @@ CONFIG_PCI_NAMES=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -210,7 +215,6 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
@@ -219,7 +223,6 @@ CONFIG_SCSI_IBMVSCSI=m
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=y
@@ -228,6 +231,7 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -250,6 +254,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
 
 #
 # Fusion MPT device support
@@ -280,7 +285,6 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 CONFIG_NET_KEY=m
 CONFIG_INET=y
@@ -445,7 +449,6 @@ CONFIG_PCNET32=y
 # CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
@@ -471,6 +474,7 @@ CONFIG_E1000=m
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -539,14 +543,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -556,6 +552,12 @@ CONFIG_SOUND_GAMEPORT=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 # CONFIG_SERIAL_NONSTANDARD is not set
@@ -570,6 +572,7 @@ CONFIG_SOUND_GAMEPORT=y
 #
 CONFIG_SERIAL_CORE=m
 CONFIG_SERIAL_ICOM=m
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -592,9 +595,16 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Ftape, the floppy tape device driver
 #
+# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
 
 #
 # I2C support
@@ -633,13 +643,9 @@ CONFIG_MAX_RAW_DEVS=256
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -848,10 +854,13 @@ CONFIG_OPROFILE=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
@@ -881,6 +890,7 @@ CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
diff --git a/arch/ppc64/configs/maple_defconfig b/arch/ppc64/configs/maple_defconfig
index cf52750..8051b0f 100644
--- a/arch/ppc64/configs/maple_defconfig
+++ b/arch/ppc64/configs/maple_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc3-bk6
-# Wed Feb  9 23:34:53 2005
+# Linux kernel version: 2.6.12-rc6
+# Tue Jun 14 17:12:48 2005
 #
 CONFIG_64BIT=y
 CONFIG_MMU=y
@@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
-CONFIG_FRAME_POINTER=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 
 #
@@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -30,24 +31,28 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_AUDIT is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -84,6 +89,8 @@ CONFIG_NR_CPUS=2
 # CONFIG_SCHED_SMT is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
 
 #
 # General setup
@@ -94,6 +101,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_PCI_LEGACY_PROC=y
 CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -101,10 +109,6 @@ CONFIG_PCI_NAMES=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
@@ -261,7 +265,6 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -376,6 +379,8 @@ CONFIG_E1000=y
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_MV643XX_ETH is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -432,14 +437,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -449,6 +446,12 @@ CONFIG_SOUND_GAMEPORT=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -469,7 +472,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -492,8 +495,15 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Ftape, the floppy tape device driver
 #
+# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
 
 #
 # I2C support
@@ -518,8 +528,8 @@ CONFIG_I2C_ALGOBIT=y
 CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_ISA is not set
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -545,7 +555,9 @@ CONFIG_I2C_AMD8111=y
 # CONFIG_SENSORS_ASB100 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM75 is not set
@@ -556,9 +568,11 @@ CONFIG_I2C_AMD8111=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
@@ -568,6 +582,7 @@ CONFIG_I2C_AMD8111=y
 #
 # Other I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -615,6 +630,8 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -625,8 +642,6 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 
 #
 # USB Host Controller Drivers
@@ -635,6 +650,8 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_SPLIT_ISO=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
 
@@ -688,6 +705,7 @@ CONFIG_USB_HIDINPUT=y
 CONFIG_USB_PEGASUS=y
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -699,8 +717,10 @@ CONFIG_USB_PEGASUS=y
 CONFIG_USB_SERIAL=y
 # CONFIG_USB_SERIAL_CONSOLE is not set
 CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 # CONFIG_USB_SERIAL_EMPEG is not set
 # CONFIG_USB_SERIAL_FTDI_SIO is not set
@@ -729,6 +749,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_SERIAL_KOBIL_SCT is not set
 # CONFIG_USB_SERIAL_MCT_U232 is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
 CONFIG_USB_SERIAL_TI=m
 # CONFIG_USB_SERIAL_CYBERJACK is not set
@@ -750,6 +771,7 @@ CONFIG_USB_EZUSB=y
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -936,10 +958,13 @@ CONFIG_NLS_UTF8=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_SCHEDSTATS is not set
 CONFIG_DEBUG_SLAB=y
+# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
@@ -971,6 +996,7 @@ CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
diff --git a/arch/ppc64/configs/pSeries_defconfig b/arch/ppc64/configs/pSeries_defconfig
index 4fecf23..3eb5ef2 100644
--- a/arch/ppc64/configs/pSeries_defconfig
+++ b/arch/ppc64/configs/pSeries_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc3-bk6
-# Wed Feb  9 23:34:54 2005
+# Linux kernel version: 2.6.12-rc6
+# Tue Jun 14 17:13:47 2005
 #
 CONFIG_64BIT=y
 CONFIG_MMU=y
@@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
-CONFIG_FRAME_POINTER=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 
 #
@@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -30,24 +31,29 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=17
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_CPUSETS=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -89,9 +95,12 @@ CONFIG_SCHED_SMT=y
 CONFIG_EEH=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_PPC_RTAS=y
+CONFIG_RTAS_PROC=y
 CONFIG_RTAS_FLASH=m
 CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
 
 #
 # General setup
@@ -102,6 +111,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_PCI_LEGACY_PROC=y
 CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 CONFIG_HOTPLUG_CPU=y
 
 #
@@ -110,10 +120,6 @@ CONFIG_HOTPLUG_CPU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 CONFIG_HOTPLUG_PCI=m
@@ -147,11 +153,10 @@ CONFIG_FW_LOADER=y
 #
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_CML1=m
 # CONFIG_PARPORT_SERIAL is not set
 # CONFIG_PARPORT_PC_FIFO is not set
 # CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_OTHER is not set
+# CONFIG_PARPORT_GSC is not set
 # CONFIG_PARPORT_1284 is not set
 
 #
@@ -293,7 +298,6 @@ CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
@@ -310,7 +314,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 CONFIG_SCSI_IPR=y
 CONFIG_SCSI_IPR_TRACE=y
 CONFIG_SCSI_IPR_DUMP=y
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=y
@@ -319,6 +322,7 @@ CONFIG_SCSI_QLA22XX=m
 CONFIG_SCSI_QLA2300=m
 CONFIG_SCSI_QLA2322=m
 CONFIG_SCSI_QLA6312=m
+CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -341,6 +345,8 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
 
 #
 # Fusion MPT device support
@@ -371,7 +377,6 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 CONFIG_NET_KEY=m
 CONFIG_INET=y
@@ -539,7 +544,6 @@ CONFIG_PCNET32=y
 # CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
@@ -565,6 +569,8 @@ CONFIG_E1000=y
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
+# CONFIG_MV643XX_ETH is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -636,20 +642,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
@@ -669,6 +661,18 @@ CONFIG_INPUT_PCSPKR=m
 # CONFIG_INPUT_UINPUT is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -689,8 +693,8 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_PMACZILOG is not set
 CONFIG_SERIAL_ICOM=m
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -718,9 +722,16 @@ CONFIG_HVCS=m
 #
 # Ftape, the floppy tape device driver
 #
+# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=1024
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
 
 #
 # I2C support
@@ -745,8 +756,8 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_ISA is not set
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@@ -773,7 +784,9 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_SENSORS_ASB100 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM75 is not set
@@ -784,9 +797,11 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
@@ -796,6 +811,7 @@ CONFIG_I2C_ALGOBIT=y
 #
 # Other I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -828,8 +844,13 @@ CONFIG_I2C_ALGOBIT=y
 # Graphics support
 #
 CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+CONFIG_FB_MACMODES=y
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
@@ -838,6 +859,7 @@ CONFIG_FB_OF=y
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 # CONFIG_FB_VGA16 is not set
+# CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 CONFIG_FB_MATROX=y
 CONFIG_FB_MATROX_MILLENIUM=y
@@ -858,6 +880,7 @@ CONFIG_FB_RADEON_I2C=y
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -891,6 +914,8 @@ CONFIG_LCD_DEVICE=y
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -901,8 +926,6 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 
 #
 # USB Host Controller Drivers
@@ -911,6 +934,8 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 
@@ -926,12 +951,11 @@ CONFIG_USB_OHCI_HCD=y
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
@@ -975,6 +999,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1000,6 +1025,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -1208,10 +1234,13 @@ CONFIG_OPROFILE=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
@@ -1243,6 +1272,7 @@ CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
diff --git a/arch/ppc64/defconfig b/arch/ppc64/defconfig
index 537b1cc..2f31bf3 100644
--- a/arch/ppc64/defconfig
+++ b/arch/ppc64/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc3-bk6
-# Wed Feb  9 23:34:51 2005
+# Linux kernel version: 2.6.12-rc5-git9
+# Sun Jun  5 09:26:47 2005
 #
 CONFIG_64BIT=y
 CONFIG_MMU=y
@@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
-CONFIG_FRAME_POINTER=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 
 #
@@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -30,24 +31,28 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_AUDIT is not set
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_CPUSETS=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -91,9 +96,12 @@ CONFIG_DISCONTIGMEM=y
 CONFIG_EEH=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_PPC_RTAS=y
+CONFIG_RTAS_PROC=y
 CONFIG_RTAS_FLASH=m
 CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
 
 #
 # General setup
@@ -104,6 +112,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 # CONFIG_PCI_LEGACY_PROC is not set
 # CONFIG_PCI_NAMES is not set
+# CONFIG_PCI_DEBUG is not set
 CONFIG_HOTPLUG_CPU=y
 
 #
@@ -112,10 +121,6 @@ CONFIG_HOTPLUG_CPU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 CONFIG_HOTPLUG_PCI=m
@@ -149,11 +154,10 @@ CONFIG_FW_LOADER=y
 #
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_CML1=m
 # CONFIG_PARPORT_SERIAL is not set
 # CONFIG_PARPORT_PC_FIFO is not set
 # CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_OTHER is not set
+# CONFIG_PARPORT_GSC is not set
 # CONFIG_PARPORT_1284 is not set
 
 #
@@ -301,6 +305,7 @@ CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_ATA_PIIX is not set
 # CONFIG_SCSI_SATA_NV is not set
 # CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
 # CONFIG_SCSI_SATA_SX4 is not set
 # CONFIG_SCSI_SATA_SIL is not set
 # CONFIG_SCSI_SATA_SIS is not set
@@ -310,7 +315,6 @@ CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
@@ -327,7 +331,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 CONFIG_SCSI_IPR=y
 CONFIG_SCSI_IPR_TRACE=y
 CONFIG_SCSI_IPR_DUMP=y
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=y
@@ -336,6 +339,7 @@ CONFIG_SCSI_QLA22XX=m
 CONFIG_SCSI_QLA2300=m
 CONFIG_SCSI_QLA2322=m
 CONFIG_SCSI_QLA6312=m
+CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 CONFIG_SCSI_DEBUG=m
@@ -358,6 +362,8 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
 
 #
 # Fusion MPT device support
@@ -405,6 +411,7 @@ CONFIG_IEEE1394_AMDTP=m
 #
 CONFIG_ADB=y
 CONFIG_ADB_PMU=y
+CONFIG_PMAC_SMU=y
 # CONFIG_PMAC_PBOOK is not set
 # CONFIG_PMAC_BACKLIGHT is not set
 # CONFIG_INPUT_ADBHID is not set
@@ -420,7 +427,6 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 CONFIG_NET_KEY=m
 CONFIG_INET=y
@@ -588,7 +594,6 @@ CONFIG_PCNET32=y
 # CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
@@ -614,6 +619,8 @@ CONFIG_E1000=y
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
+# CONFIG_MV643XX_ETH is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -683,20 +690,6 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
@@ -716,6 +709,18 @@ CONFIG_INPUT_PCSPKR=m
 # CONFIG_INPUT_UINPUT is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -738,6 +743,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_PMACZILOG is not set
 CONFIG_SERIAL_ICOM=m
+CONFIG_SERIAL_JSM=m
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -766,9 +772,16 @@ CONFIG_HVCS=m
 #
 # Ftape, the floppy tape device driver
 #
+# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
 
 #
 # I2C support
@@ -793,9 +806,9 @@ CONFIG_I2C_ALGOBIT=y
 CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_ISA is not set
 CONFIG_I2C_KEYWEST=y
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@@ -822,7 +835,9 @@ CONFIG_I2C_KEYWEST=y
 # CONFIG_SENSORS_ASB100 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM75 is not set
@@ -833,9 +848,11 @@ CONFIG_I2C_KEYWEST=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
@@ -845,6 +862,7 @@ CONFIG_I2C_KEYWEST=y
 #
 # Other I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -877,6 +895,11 @@ CONFIG_I2C_KEYWEST=y
 # Graphics support
 #
 CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+CONFIG_FB_MACMODES=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_CIRRUS is not set
@@ -890,9 +913,8 @@ CONFIG_FB_OF=y
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 # CONFIG_FB_VGA16 is not set
-CONFIG_FB_RIVA=y
-CONFIG_FB_RIVA_I2C=y
-# CONFIG_FB_RIVA_DEBUG is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
 CONFIG_FB_MATROX=y
 CONFIG_FB_MATROX_MILLENIUM=y
 CONFIG_FB_MATROX_MYSTIQUE=y
@@ -913,6 +935,7 @@ CONFIG_FB_RADEON_I2C=y
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -946,6 +969,8 @@ CONFIG_LCD_DEVICE=y
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -956,8 +981,6 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 
 #
 # USB Host Controller Drivers
@@ -966,6 +989,8 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 
@@ -981,12 +1006,11 @@ CONFIG_USB_OHCI_HCD=y
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_RW_DETECT=y
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
@@ -1030,6 +1054,7 @@ CONFIG_USB_HIDDEV=y
 CONFIG_USB_PEGASUS=y
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -1055,6 +1080,7 @@ CONFIG_USB_PEGASUS=y
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -1276,10 +1302,13 @@ CONFIG_OPROFILE=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
@@ -1311,6 +1340,7 @@ CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
diff --git a/arch/um/drivers/Makefile b/arch/um/drivers/Makefile
index 323f72c..b2de991 100644
--- a/arch/um/drivers/Makefile
+++ b/arch/um/drivers/Makefile
@@ -22,8 +22,8 @@ obj-y := stdio_console.o fd.o chan_kern.o chan_user.o line.o
 obj-$(CONFIG_SSL) += ssl.o
 obj-$(CONFIG_STDERR_CONSOLE) += stderr_console.o
 
-obj-$(CONFIG_UML_NET_SLIP) += slip.o
-obj-$(CONFIG_UML_NET_SLIRP) += slirp.o
+obj-$(CONFIG_UML_NET_SLIP) += slip.o slip_common.o
+obj-$(CONFIG_UML_NET_SLIRP) += slirp.o slip_common.o
 obj-$(CONFIG_UML_NET_DAEMON) += daemon.o 
 obj-$(CONFIG_UML_NET_MCAST) += mcast.o 
 #obj-$(CONFIG_UML_NET_PCAP) += pcap.o $(PCAP)
@@ -41,6 +41,6 @@ obj-$(CONFIG_UML_WATCHDOG) += harddog.o
 obj-$(CONFIG_BLK_DEV_COW_COMMON) += cow_user.o
 obj-$(CONFIG_UML_RANDOM) += random.o
 
-USER_OBJS := fd.o null.o pty.o tty.o xterm.o
+USER_OBJS := fd.o null.o pty.o tty.o xterm.o slip_common.o
 
 include arch/um/scripts/Makefile.rules
diff --git a/arch/um/drivers/slip.h b/arch/um/drivers/slip.h
index d523618..bb0dab4 100644
--- a/arch/um/drivers/slip.h
+++ b/arch/um/drivers/slip.h
@@ -1,10 +1,7 @@
 #ifndef __UM_SLIP_H
 #define __UM_SLIP_H
 
-#define BUF_SIZE 1500
- /* two bytes each for a (pathological) max packet of escaped chars +  * 
-  * terminating END char + initial END char                            */
-#define ENC_BUF_SIZE (2 * BUF_SIZE + 2)
+#include "slip_common.h"
 
 struct slip_data {
 	void *dev;
@@ -12,28 +9,12 @@ struct slip_data {
 	char *addr;
 	char *gate_addr;
 	int slave;
-	unsigned char ibuf[ENC_BUF_SIZE];
-	unsigned char obuf[ENC_BUF_SIZE];
-	int more; /* more data: do not read fd until ibuf has been drained */
-	int pos;
-	int esc;
+	struct slip_proto slip;
 };
 
 extern struct net_user_info slip_user_info;
 
-extern int set_umn_addr(int fd, char *addr, char *ptp_addr);
 extern int slip_user_read(int fd, void *buf, int len, struct slip_data *pri);
 extern int slip_user_write(int fd, void *buf, int len, struct slip_data *pri);
 
 #endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/slip_common.c b/arch/um/drivers/slip_common.c
new file mode 100644
index 0000000..e89cfc6
--- /dev/null
+++ b/arch/um/drivers/slip_common.c
@@ -0,0 +1,54 @@
+#include <string.h>
+#include "slip_common.h"
+#include "net_user.h"
+
+int slip_proto_read(int fd, void *buf, int len, struct slip_proto *slip)
+{
+	int i, n, size, start;
+
+	if(slip->more > 0){
+		i = 0;
+		while(i < slip->more){
+			size = slip_unesc(slip->ibuf[i++], slip->ibuf,
+					  &slip->pos, &slip->esc);
+			if(size){
+				memcpy(buf, slip->ibuf, size);
+				memmove(slip->ibuf, &slip->ibuf[i],
+					slip->more - i);
+				slip->more = slip->more - i;
+				return size;
+			}
+		}
+		slip->more = 0;
+	}
+
+	n = net_read(fd, &slip->ibuf[slip->pos],
+		     sizeof(slip->ibuf) - slip->pos);
+	if(n <= 0)
+		return n;
+
+	start = slip->pos;
+	for(i = 0; i < n; i++){
+		size = slip_unesc(slip->ibuf[start + i], slip->ibuf,&slip->pos,
+				  &slip->esc);
+		if(size){
+			memcpy(buf, slip->ibuf, size);
+			memmove(slip->ibuf, &slip->ibuf[start+i+1],
+				n - (i + 1));
+			slip->more = n - (i + 1);
+			return size;
+		}
+	}
+	return 0;
+}
+
+int slip_proto_write(int fd, void *buf, int len, struct slip_proto *slip)
+{
+	int actual, n;
+
+	actual = slip_esc(buf, slip->obuf, len);
+	n = net_write(fd, slip->obuf, actual);
+	if(n < 0)
+		return n;
+	else return len;
+}
diff --git a/arch/um/drivers/slip_proto.h b/arch/um/drivers/slip_common.h
index 4c4d94a..2ae76d8 100644
--- a/arch/um/drivers/slip_proto.h
+++ b/arch/um/drivers/slip_common.h
@@ -1,10 +1,10 @@
-/* 
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
+#ifndef __UM_SLIP_COMMON_H
+#define __UM_SLIP_COMMON_H
 
-#ifndef __UM_SLIP_PROTO_H__
-#define __UM_SLIP_PROTO_H__
+#define BUF_SIZE 1500
+ /* two bytes each for a (pathological) max packet of escaped chars +  *
+  * terminating END char + initial END char                            */
+#define ENC_BUF_SIZE (2 * BUF_SIZE + 2)
 
 /* SLIP protocol characters. */
 #define SLIP_END             0300	/* indicates end of frame	*/
@@ -80,15 +80,25 @@ static inline int slip_esc(unsigned char *s, unsigned char *d, int len)
 	return (ptr - d);
 }
 
-#endif
+struct slip_proto {
+	unsigned char ibuf[ENC_BUF_SIZE];
+	unsigned char obuf[ENC_BUF_SIZE];
+	int more; /* more data: do not read fd until ibuf has been drained */
+	int pos;
+	int esc;
+};
+
+#define SLIP_PROTO_INIT { \
+	.ibuf  	= { '\0' }, \
+	.obuf  	= { '\0' }, \
+        .more	= 0, \
+	.pos	= 0, \
+	.esc	= 0 \
+}
 
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+extern int slip_proto_read(int fd, void *buf, int len,
+			   struct slip_proto *slip);
+extern int slip_proto_write(int fd, void *buf, int len,
+			    struct slip_proto *slip);
+
+#endif
diff --git a/arch/um/drivers/slip_kern.c b/arch/um/drivers/slip_kern.c
index 0886eed..9a6f5c8 100644
--- a/arch/um/drivers/slip_kern.c
+++ b/arch/um/drivers/slip_kern.c
@@ -26,16 +26,16 @@ void slip_init(struct net_device *dev, void *data)
 		  .addr		= NULL,
 		  .gate_addr 	= init->gate_addr,
 		  .slave  	= -1,
-		  .ibuf  	= { '\0' },
-		  .obuf  	= { '\0' },
-		  .pos 		= 0,
-		  .esc 		= 0,
+		  .slip		= SLIP_PROTO_INIT,
 		  .dev 		= dev });
 
 	dev->init = NULL;
+	dev->header_cache_update = NULL;
+	dev->hard_header_cache = NULL;
+	dev->hard_header = NULL;
 	dev->hard_header_len = 0;
-	dev->addr_len = 4;
-	dev->type = ARPHRD_ETHER;
+	dev->addr_len = 0;
+	dev->type = ARPHRD_SLIP;
 	dev->tx_queue_len = 256;
 	dev->flags = IFF_NOARP;
 	printk("SLIP backend - SLIP IP = %s\n", spri->gate_addr);
diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c
index d94846b..71af444 100644
--- a/arch/um/drivers/slip_user.c
+++ b/arch/um/drivers/slip_user.c
@@ -13,7 +13,7 @@
 #include "user.h"
 #include "net_user.h"
 #include "slip.h"
-#include "slip_proto.h"
+#include "slip_common.h"
 #include "helper.h"
 #include "os.h"
 
@@ -77,41 +77,51 @@ static int slip_tramp(char **argv, int fd)
 	err = os_pipe(fds, 1, 0);
 	if(err < 0){
 		printk("slip_tramp : pipe failed, err = %d\n", -err);
-		return(err);
+		goto out;
 	}
 
 	err = 0;
 	pe_data.stdin = fd;
 	pe_data.stdout = fds[1];
 	pe_data.close_me = fds[0];
-	pid = run_helper(slip_pre_exec, &pe_data, argv, NULL);
+	err = run_helper(slip_pre_exec, &pe_data, argv, NULL);
+	if(err < 0)
+		goto out_close;
+	pid = err;
+
+	output_len = page_size();
+	output = um_kmalloc(output_len);
+	if(output == NULL){
+		printk("slip_tramp : failed to allocate output buffer\n");
+		os_kill_process(pid, 1);
+		err = -ENOMEM;
+		goto out_free;
+	}
 
-	if(pid < 0) err = pid;
-	else {
-		output_len = page_size();
-		output = um_kmalloc(output_len);
-		if(output == NULL)
-			printk("slip_tramp : failed to allocate output "
-			       "buffer\n");
-
-		os_close_file(fds[1]);
-		read_output(fds[0], output, output_len);
-		if(output != NULL){
-			printk("%s", output);
-			kfree(output);
-		}
-		CATCH_EINTR(err = waitpid(pid, &status, 0));
-		if(err < 0)
-			err = errno;
-		else if(!WIFEXITED(status) || (WEXITSTATUS(status) != 0)){
-			printk("'%s' didn't exit with status 0\n", argv[0]);
-			err = -EINVAL;
-		}
+	os_close_file(fds[1]);
+	read_output(fds[0], output, output_len);
+	printk("%s", output);
+
+	CATCH_EINTR(err = waitpid(pid, &status, 0));
+	if(err < 0)
+		err = errno;
+	else if(!WIFEXITED(status) || (WEXITSTATUS(status) != 0)){
+		printk("'%s' didn't exit with status 0\n", argv[0]);
+		err = -EINVAL;
 	}
+	else err = 0;
 
 	os_close_file(fds[0]);
 
-	return(err);
+out_free:
+	kfree(output);
+	return err;
+
+out_close:
+	os_close_file(fds[0]);
+	os_close_file(fds[1]);
+out:
+	return err;
 }
 
 static int slip_open(void *data)
@@ -123,21 +133,26 @@ static int slip_open(void *data)
 			 NULL };
 	int sfd, mfd, err;
 
-	mfd = get_pty();
-	if(mfd < 0){
-		printk("umn : Failed to open pty, err = %d\n", -mfd);
-		return(mfd);
+	err = get_pty();
+	if(err < 0){
+		printk("slip-open : Failed to open pty, err = %d\n", -err);
+		goto out;
 	}
-	sfd = os_open_file(ptsname(mfd), of_rdwr(OPENFLAGS()), 0);
-	if(sfd < 0){
-		printk("Couldn't open tty for slip line, err = %d\n", -sfd);
-		os_close_file(mfd);
-		return(sfd);
+	mfd = err;
+
+	err = os_open_file(ptsname(mfd), of_rdwr(OPENFLAGS()), 0);
+	if(err < 0){
+		printk("Couldn't open tty for slip line, err = %d\n", -err);
+		goto out_close;
 	}
-	if(set_up_tty(sfd)) return(-1);
+	sfd = err;
+
+	if(set_up_tty(sfd))
+		goto out_close2;
+
 	pri->slave = sfd;
-	pri->pos = 0;
-	pri->esc = 0;
+	pri->slip.pos = 0;
+	pri->slip.esc = 0;
 	if(pri->gate_addr != NULL){
 		sprintf(version_buf, "%d", UML_NET_VERSION);
 		strcpy(gate_buf, pri->gate_addr);
@@ -146,12 +161,12 @@ static int slip_open(void *data)
 
 		if(err < 0){
 			printk("slip_tramp failed - err = %d\n", -err);
-			return(err);
+			goto out_close2;
 		}
 		err = os_get_ifname(pri->slave, pri->name);
 		if(err < 0){
 			printk("get_ifname failed, err = %d\n", -err);
-			return(err);
+			goto out_close2;
 		}
 		iter_addresses(pri->dev, open_addr, pri->name);
 	}
@@ -160,10 +175,16 @@ static int slip_open(void *data)
 		if(err < 0){
 			printk("Failed to set slip discipline encapsulation - "
 			       "err = %d\n", -err);
-			return(err);
+			goto out_close2;
 		}
 	}
 	return(mfd);
+out_close2:
+	os_close_file(sfd);
+out_close:
+	os_close_file(mfd);
+out:
+	return err;
 }
 
 static void slip_close(int fd, void *data)
@@ -190,48 +211,12 @@ static void slip_close(int fd, void *data)
 
 int slip_user_read(int fd, void *buf, int len, struct slip_data *pri)
 {
-	int i, n, size, start;
-
-	if(pri->more>0) {
-		i = 0;
-		while(i < pri->more) {
-			size = slip_unesc(pri->ibuf[i++],
-					pri->ibuf, &pri->pos, &pri->esc);
-			if(size){
-				memcpy(buf, pri->ibuf, size);
-				memmove(pri->ibuf, &pri->ibuf[i], pri->more-i);
-				pri->more=pri->more-i; 
-				return(size);
-			}
-		}
-		pri->more=0;
-	}
-
-	n = net_read(fd, &pri->ibuf[pri->pos], sizeof(pri->ibuf) - pri->pos);
-	if(n <= 0) return(n);
-
-	start = pri->pos;
-	for(i = 0; i < n; i++){
-		size = slip_unesc(pri->ibuf[start + i],
-				pri->ibuf, &pri->pos, &pri->esc);
-		if(size){
-			memcpy(buf, pri->ibuf, size);
-			memmove(pri->ibuf, &pri->ibuf[start+i+1], n-(i+1));
-			pri->more=n-(i+1); 
-			return(size);
-		}
-	}
-	return(0);
+	return slip_proto_read(fd, buf, len, &pri->slip);
 }
 
 int slip_user_write(int fd, void *buf, int len, struct slip_data *pri)
 {
-	int actual, n;
-
-	actual = slip_esc(buf, pri->obuf, len);
-	n = net_write(fd, pri->obuf, actual);
-	if(n < 0) return(n);
-	else return(len);
+	return slip_proto_write(fd, buf, len, &pri->slip);
 }
 
 static int slip_set_mtu(int mtu, void *data)
@@ -267,14 +252,3 @@ struct net_user_info slip_user_info = {
 	.delete_address = slip_del_addr,
 	.max_packet	= BUF_SIZE
 };
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/slirp.h b/arch/um/drivers/slirp.h
index afa4e30..6cf88ab 100644
--- a/arch/um/drivers/slirp.h
+++ b/arch/um/drivers/slirp.h
@@ -1,10 +1,7 @@
 #ifndef __UM_SLIRP_H
 #define __UM_SLIRP_H
 
-#define BUF_SIZE 1500
- /* two bytes each for a (pathological) max packet of escaped chars +  * 
-  * terminating END char + initial END char                            */
-#define ENC_BUF_SIZE (2 * BUF_SIZE + 2)
+#include "slip_common.h"
 
 #define SLIRP_MAX_ARGS 100
 /*
@@ -24,28 +21,13 @@ struct slirp_data {
 	struct arg_list_dummy_wrapper argw;
 	int pid;
 	int slave;
-	unsigned char ibuf[ENC_BUF_SIZE];
-	unsigned char obuf[ENC_BUF_SIZE];
-	int more; /* more data: do not read fd until ibuf has been drained */
-	int pos;
-	int esc;
+	struct slip_proto slip;
 };
 
 extern struct net_user_info slirp_user_info;
 
-extern int set_umn_addr(int fd, char *addr, char *ptp_addr);
 extern int slirp_user_read(int fd, void *buf, int len, struct slirp_data *pri);
-extern int slirp_user_write(int fd, void *buf, int len, struct slirp_data *pri);
+extern int slirp_user_write(int fd, void *buf, int len,
+			    struct slirp_data *pri);
 
 #endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/slirp_kern.c b/arch/um/drivers/slirp_kern.c
index c9d6b52..9864d27 100644
--- a/arch/um/drivers/slirp_kern.c
+++ b/arch/um/drivers/slirp_kern.c
@@ -25,10 +25,7 @@ void slirp_init(struct net_device *dev, void *data)
 		{ .argw 	= init->argw,
 		  .pid  	= -1,
 		  .slave  	= -1,
-		  .ibuf  	= { '\0' },
-		  .obuf  	= { '\0' },
-		  .pos 		= 0,
-		  .esc 		= 0,
+		  .slip		= SLIP_PROTO_INIT,
 		  .dev 		= dev });
 
 	dev->init = NULL;
diff --git a/arch/um/drivers/slirp_user.c b/arch/um/drivers/slirp_user.c
index c322515..8d91f66 100644
--- a/arch/um/drivers/slirp_user.c
+++ b/arch/um/drivers/slirp_user.c
@@ -12,7 +12,7 @@
 #include "user.h"
 #include "net_user.h"
 #include "slirp.h"
-#include "slip_proto.h"
+#include "slip_common.h"
 #include "helper.h"
 #include "os.h"
 
@@ -48,47 +48,32 @@ static int slirp_tramp(char **argv, int fd)
 	return(pid);
 }
 
-/* XXX This is just a trivial wrapper around os_pipe */
-static int slirp_datachan(int *mfd, int *sfd)
-{
-	int fds[2], err;
-
-	err = os_pipe(fds, 1, 1);
-	if(err < 0){
-		printk("slirp_datachan: Failed to open pipe, err = %d\n", -err);
-		return(err);
-	}
-
-	*mfd = fds[0];
-	*sfd = fds[1];
-	return(0);
-}
-
 static int slirp_open(void *data)
 {
 	struct slirp_data *pri = data;
-	int sfd, mfd, pid, err;
+	int fds[2], pid, err;
 
-	err = slirp_datachan(&mfd, &sfd);
+	err = os_pipe(fds, 1, 1);
 	if(err)
 		return(err);
 
-	pid = slirp_tramp(pri->argw.argv, sfd);
-
-	if(pid < 0){
-		printk("slirp_tramp failed - errno = %d\n", -pid);
-		os_close_file(sfd);	
-		os_close_file(mfd);	
-		return(pid);
+	err = slirp_tramp(pri->argw.argv, fds[1]);
+	if(err < 0){
+		printk("slirp_tramp failed - errno = %d\n", -err);
+		goto out;
 	}
-
-	pri->slave = sfd;
-	pri->pos = 0;
-	pri->esc = 0;
-
-	pri->pid = pid;
-
-	return(mfd);
+	pid = err;
+
+	pri->slave = fds[1];
+	pri->slip.pos = 0;
+	pri->slip.esc = 0;
+	pri->pid = err;
+
+	return(fds[0]);
+out:
+	os_close_file(fds[0]);
+	os_close_file(fds[1]);
+	return err;
 }
 
 static void slirp_close(int fd, void *data)
@@ -129,48 +114,12 @@ static void slirp_close(int fd, void *data)
 
 int slirp_user_read(int fd, void *buf, int len, struct slirp_data *pri)
 {
-	int i, n, size, start;
-
-	if(pri->more>0) {
-		i = 0;
-		while(i < pri->more) {
-			size = slip_unesc(pri->ibuf[i++],
-					pri->ibuf,&pri->pos,&pri->esc);
-			if(size){
-				memcpy(buf, pri->ibuf, size);
-				memmove(pri->ibuf, &pri->ibuf[i], pri->more-i);
-				pri->more=pri->more-i; 
-				return(size);
-			}
-		}
-		pri->more=0;
-	}
-
-	n = net_read(fd, &pri->ibuf[pri->pos], sizeof(pri->ibuf) - pri->pos);
-	if(n <= 0) return(n);
-
-	start = pri->pos;
-	for(i = 0; i < n; i++){
-		size = slip_unesc(pri->ibuf[start + i],
-				pri->ibuf,&pri->pos,&pri->esc);
-		if(size){
-			memcpy(buf, pri->ibuf, size);
-			memmove(pri->ibuf, &pri->ibuf[start+i+1], n-(i+1));
-			pri->more=n-(i+1); 
-			return(size);
-		}
-	}
-	return(0);
+	return slip_proto_read(fd, buf, len, &pri->slip);
 }
 
 int slirp_user_write(int fd, void *buf, int len, struct slirp_data *pri)
 {
-	int actual, n;
-
-	actual = slip_esc(buf, pri->obuf, len);
-	n = net_write(fd, pri->obuf, actual);
-	if(n < 0) return(n);
-	else return(len);
+	return slip_proto_write(fd, buf, len, &pri->slip);
 }
 
 static int slirp_set_mtu(int mtu, void *data)
@@ -188,14 +137,3 @@ struct net_user_info slirp_user_info = {
 	.delete_address = NULL,
 	.max_packet	= BUF_SIZE
 };
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/include/sysdep-i386/ptrace.h b/arch/um/include/sysdep-i386/ptrace.h
index 6eaeb99..c8ee955 100644
--- a/arch/um/include/sysdep-i386/ptrace.h
+++ b/arch/um/include/sysdep-i386/ptrace.h
@@ -8,6 +8,8 @@
 
 #include "uml-config.h"
 #include "user_constants.h"
+#include "sysdep/faultinfo.h"
+#include "choose-mode.h"
 
 #define MAX_REG_NR (UM_FRAME_SIZE / sizeof(unsigned long))
 #define MAX_REG_OFFSET (UM_FRAME_SIZE)
@@ -58,9 +60,6 @@ extern int sysemu_supported;
 #define PTRACE_SYSEMU_SINGLESTEP 32
 #endif
 
-#include "sysdep/faultinfo.h"
-#include "choose-mode.h"
-
 union uml_pt_regs {
 #ifdef UML_CONFIG_MODE_TT
 	struct tt_regs {
diff --git a/arch/um/kernel/main.c b/arch/um/kernel/main.c
index e42e636..e59f581 100644
--- a/arch/um/kernel/main.c
+++ b/arch/um/kernel/main.c
@@ -24,8 +24,6 @@
 #include "mode.h"
 #include "choose-mode.h"
 #include "uml-config.h"
-#include "irq_user.h"
-#include "time_user.h"
 #include "os.h"
 
 /* Set in set_stklim, which is called from main and __wrap_malloc.
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index 51f8e5a..1b5ef3e 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -30,7 +30,6 @@
 #include "init.h"
 #include "os.h"
 #include "uml-config.h"
-#include "ptrace_user.h"
 #include "choose-mode.h"
 #include "mode.h"
 #ifdef UML_CONFIG_MODE_SKAS
@@ -131,7 +130,7 @@ int start_fork_tramp(void *thread_arg, unsigned long temp_stack,
 	return(arg.pid);
 }
 
-static int ptrace_child(void *arg)
+static int ptrace_child(void)
 {
 	int ret;
 	int pid = os_getpid(), ppid = getppid();
@@ -160,20 +159,16 @@ static int ptrace_child(void *arg)
 	_exit(ret);
 }
 
-static int start_ptraced_child(void **stack_out)
+static int start_ptraced_child(void)
 {
-	void *stack;
-	unsigned long sp;
 	int pid, n, status;
 	
-	stack = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC,
-		     MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
-	if(stack == MAP_FAILED)
-		panic("check_ptrace : mmap failed, errno = %d", errno);
-	sp = (unsigned long) stack + PAGE_SIZE - sizeof(void *);
-	pid = clone(ptrace_child, (void *) sp, SIGCHLD, NULL);
+	pid = fork();
+	if(pid == 0)
+		ptrace_child();
+
 	if(pid < 0)
-		panic("check_ptrace : clone failed, errno = %d", errno);
+		panic("check_ptrace : fork failed, errno = %d", errno);
 	CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
 	if(n < 0)
 		panic("check_ptrace : wait failed, errno = %d", errno);
@@ -181,7 +176,6 @@ static int start_ptraced_child(void **stack_out)
 		panic("check_ptrace : expected SIGSTOP, got status = %d",
 		      status);
 
-	*stack_out = stack;
 	return(pid);
 }
 
@@ -189,12 +183,12 @@ static int start_ptraced_child(void **stack_out)
  * just avoid using sysemu, not panic, but only if SYSEMU features are broken.
  * So only for SYSEMU features we test mustpanic, while normal host features
  * must work anyway!*/
-static int stop_ptraced_child(int pid, void *stack, int exitcode, int mustpanic)
+static int stop_ptraced_child(int pid, int exitcode, int mustexit)
 {
 	int status, n, ret = 0;
 
 	if(ptrace(PTRACE_CONT, pid, 0, 0) < 0)
-		panic("check_ptrace : ptrace failed, errno = %d", errno);
+		panic("stop_ptraced_child : ptrace failed, errno = %d", errno);
 	CATCH_EINTR(n = waitpid(pid, &status, 0));
 	if(!WIFEXITED(status) || (WEXITSTATUS(status) != exitcode)) {
 		int exit_with = WEXITSTATUS(status);
@@ -205,15 +199,13 @@ static int stop_ptraced_child(int pid, void *stack, int exitcode, int mustpanic)
 		printk("check_ptrace : child exited with exitcode %d, while "
 		      "expecting %d; status 0x%x", exit_with,
 		      exitcode, status);
-		if (mustpanic)
+		if (mustexit)
 			panic("\n");
 		else
 			printk("\n");
 		ret = -1;
 	}
 
-	if(munmap(stack, PAGE_SIZE) < 0)
-		panic("check_ptrace : munmap failed, errno = %d", errno);
 	return ret;
 }
 
@@ -235,12 +227,11 @@ __uml_setup("nosysemu", nosysemu_cmd_param,
 
 static void __init check_sysemu(void)
 {
-	void *stack;
 	int pid, syscall, n, status, count=0;
 
 	printk("Checking syscall emulation patch for ptrace...");
 	sysemu_supported = 0;
-	pid = start_ptraced_child(&stack);
+	pid = start_ptraced_child();
 
 	if(ptrace(PTRACE_SYSEMU, pid, 0, 0) < 0)
 		goto fail;
@@ -258,7 +249,7 @@ static void __init check_sysemu(void)
 		panic("check_sysemu : failed to modify system "
 		      "call return, errno = %d", errno);
 
-	if (stop_ptraced_child(pid, stack, 0, 0) < 0)
+	if (stop_ptraced_child(pid, 0, 0) < 0)
 		goto fail_stopped;
 
 	sysemu_supported = 1;
@@ -266,7 +257,7 @@ static void __init check_sysemu(void)
 	set_using_sysemu(!force_sysemu_disabled);
 
 	printk("Checking advanced syscall emulation patch for ptrace...");
-	pid = start_ptraced_child(&stack);
+	pid = start_ptraced_child();
 	while(1){
 		count++;
 		if(ptrace(PTRACE_SYSEMU_SINGLESTEP, pid, 0, 0) < 0)
@@ -291,7 +282,7 @@ static void __init check_sysemu(void)
 			break;
 		}
 	}
-	if (stop_ptraced_child(pid, stack, 0, 0) < 0)
+	if (stop_ptraced_child(pid, 0, 0) < 0)
 		goto fail_stopped;
 
 	sysemu_supported = 2;
@@ -302,18 +293,17 @@ static void __init check_sysemu(void)
 	return;
 
 fail:
-	stop_ptraced_child(pid, stack, 1, 0);
+	stop_ptraced_child(pid, 1, 0);
 fail_stopped:
 	printk("missing\n");
 }
 
 void __init check_ptrace(void)
 {
-	void *stack;
 	int pid, syscall, n, status;
 
 	printk("Checking that ptrace can change system call numbers...");
-	pid = start_ptraced_child(&stack);
+	pid = start_ptraced_child();
 
 	if (ptrace(PTRACE_OLDSETOPTIONS, pid, 0, (void *)PTRACE_O_TRACESYSGOOD) < 0)
 		panic("check_ptrace: PTRACE_SETOPTIONS failed, errno = %d", errno);
@@ -340,7 +330,7 @@ void __init check_ptrace(void)
 			break;
 		}
 	}
-	stop_ptraced_child(pid, stack, 0, 1);
+	stop_ptraced_child(pid, 0, 1);
 	printk("OK\n");
 	check_sysemu();
 }
@@ -372,11 +362,10 @@ void forward_pending_sigio(int target)
 static inline int check_skas3_ptrace_support(void)
 {
 	struct ptrace_faultinfo fi;
-	void *stack;
 	int pid, n, ret = 1;
 
 	printf("Checking for the skas3 patch in the host...");
-	pid = start_ptraced_child(&stack);
+	pid = start_ptraced_child();
 
 	n = ptrace(PTRACE_FAULTINFO, pid, 0, &fi);
 	if (n < 0) {
@@ -391,7 +380,7 @@ static inline int check_skas3_ptrace_support(void)
 	}
 
 	init_registers(pid);
-	stop_ptraced_child(pid, stack, 1, 1);
+	stop_ptraced_child(pid, 1, 1);
 
 	return(ret);
 }
diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c
index 4184271..8736d09 100644
--- a/arch/um/kernel/um_arch.c
+++ b/arch/um/kernel/um_arch.c
@@ -26,7 +26,6 @@
 #include "asm/setup.h"
 #include "ubd_user.h"
 #include "asm/current.h"
-#include "asm/setup.h"
 #include "user_util.h"
 #include "kern_util.h"
 #include "kern.h"
diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules
index 0b24918..98346c7 100644
--- a/arch/um/scripts/Makefile.rules
+++ b/arch/um/scripts/Makefile.rules
@@ -14,7 +14,7 @@ quiet_cmd_make_link = SYMLINK $@
 cmd_make_link       = ln -sf $(srctree)/arch/$(SUBARCH)/$($(notdir $@)-dir)/$(notdir $@) $@
 
 # this needs to be before the foreach, because targets does not accept
-# complete paths like $(obj)/$(f). To make sure this works, use a := assignment,
+# complete paths like $(obj)/$(f). To make sure this works, use a := assignment
 # or we will get $(obj)/$(f) in the "targets" value.
 # Also, this forces you to use the := syntax when assigning to targets.
 # Otherwise the line below will cause an infinite loop (if you don't know why,