diff options
author | Tuomas Tynkkynen <ttynkkynen@nvidia.com> | 2013-08-01 15:00:17 (GMT) |
---|---|---|
committer | Stephen Warren <swarren@nvidia.com> | 2013-08-13 18:40:47 (GMT) |
commit | cc34c9f79c1dae776ebec069bb49376462221595 (patch) | |
tree | 0d99b21d7412a280178fa93473b18d543a1f8842 /arch | |
parent | d7283c11f7e87e40c44bbffc4397309ef8bc5c7b (diff) | |
download | linux-cc34c9f79c1dae776ebec069bb49376462221595.tar.xz |
ARM: tegra: add USB DT entries for Tegra30
Add device tree entries for the 3 USB controllers and PHYs and
enable the third controller on Cardhu and Beaver boards.
Fix VBUS regulator entries on Beaver. The GPIO pins were wrong.
Also, internal pullups need to be enabled on those pins.
Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/boot/dts/tegra30-beaver.dts | 22 | ||||
-rw-r--r-- | arch/arm/boot/dts/tegra30-cardhu.dtsi | 9 | ||||
-rw-r--r-- | arch/arm/boot/dts/tegra30.dtsi | 86 |
3 files changed, 115 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 51a0ee7..4f1f01c 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -110,6 +110,11 @@ nvidia,pull = <0>; nvidia,tristate = <0>; }; + pex_l1_prsnt_n_pdd4 { + nvidia,pins = "pex_l1_prsnt_n_pdd4", + "pex_l1_clkreq_n_pdd6"; + nvidia,pull = <2>; + }; sdio3 { nvidia,pins = "drive_sdio3"; nvidia,high-speed-mode = <0>; @@ -119,6 +124,10 @@ nvidia,slew-rate-rising = <1>; nvidia,slew-rate-falling = <1>; }; + gpv { + nvidia,pins = "drive_gpv"; + nvidia,pull-up-strength = <16>; + }; }; }; @@ -319,6 +328,15 @@ non-removable; }; + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + vbus-supply = <&usb3_vbus_reg>; + status = "okay"; + }; + clocks { compatible = "simple-bus"; #address-cells = <1>; @@ -391,7 +409,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>; + gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&vdd_5v_in_reg>; }; @@ -403,7 +421,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>; + gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&vdd_5v_in_reg>; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 1ecd470..e19dbf2 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -357,6 +357,15 @@ non-removable; }; + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + vbus-supply = <&usb3_vbus_reg>; + status = "okay"; + }; + clocks { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index d81c52e..0022c12 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -631,6 +631,92 @@ status = "disabled"; }; + usb@7d000000 { + compatible = "nvidia,tegra30-ehci", "usb-ehci"; + reg = <0x7d000000 0x4000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA30_CLK_USBD>; + nvidia,needs-double-reset; + nvidia,phy = <&phy1>; + status = "disabled"; + }; + + phy1: usb-phy@7d000000 { + compatible = "nvidia,tegra30-usb-phy"; + reg = <0x7d000000 0x4000 0x7d000000 0x4000>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA30_CLK_USBD>, + <&tegra_car TEGRA30_CLK_PLL_U>, + <&tegra_car TEGRA30_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + nvidia,hssync-start-delay = <9>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <51>; + nvidia.xcvr-setup-use-fuses; + nvidia,xcvr-lsfslew = <1>; + nvidia,xcvr-lsrslew = <1>; + nvidia,xcvr-hsslew = <32>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; + status = "disabled"; + }; + + usb@7d004000 { + compatible = "nvidia,tegra30-ehci", "usb-ehci"; + reg = <0x7d004000 0x4000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + phy_type = "ulpi"; + clocks = <&tegra_car TEGRA30_CLK_USB2>; + nvidia,phy = <&phy2>; + status = "disabled"; + }; + + phy2: usb-phy@7d004000 { + compatible = "nvidia,tegra30-usb-phy"; + reg = <0x7d004000 0x4000>; + phy_type = "ulpi"; + clocks = <&tegra_car TEGRA30_CLK_USB2>, + <&tegra_car TEGRA30_CLK_PLL_U>, + <&tegra_car TEGRA30_CLK_CDEV2>; + clock-names = "reg", "pll_u", "ulpi-link"; + status = "disabled"; + }; + + usb@7d008000 { + compatible = "nvidia,tegra30-ehci", "usb-ehci"; + reg = <0x7d008000 0x4000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA30_CLK_USB3>; + nvidia,phy = <&phy3>; + status = "disabled"; + }; + + phy3: usb-phy@7d008000 { + compatible = "nvidia,tegra30-usb-phy"; + reg = <0x7d008000 0x4000 0x7d000000 0x4000>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA30_CLK_USB3>, + <&tegra_car TEGRA30_CLK_PLL_U>, + <&tegra_car TEGRA30_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + nvidia,hssync-start-delay = <0>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <51>; + nvidia.xcvr-setup-use-fuses; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + nvidia,xcvr-hsslew = <32>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; + status = "disabled"; + }; + cpus { #address-cells = <1>; #size-cells = <0>; |