diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-10-08 22:07:14 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-10-08 22:07:14 (GMT) |
commit | f5a246eab9a268f51ba8189ea5b098a1bfff200e (patch) | |
tree | a6ff7169e0bcaca498d9aec8b0624de1b74eaecb /arch | |
parent | d5bbd43d5f450c3fca058f5b85f3dfb4e8cc88c9 (diff) | |
parent | 7ff34ad80b7080fafaac8efa9ef0061708eddd51 (diff) | |
download | linux-f5a246eab9a268f51ba8189ea5b098a1bfff200e.tar.xz |
Merge tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This contains pretty many small commits covering fairly large range of
files in sound/ directory. Partly because of additional API support
and partly because of constantly developed ASoC and ARM stuff.
Some highlights:
- Introduced the helper function and documentation for exposing the
channel map via control API, as discussed in Plumbers; most of PCI
drivers are covered, will follow more drivers later
- Most of drivers have been replaced with the new PM callbacks (if
the bus is supported)
- HD-audio controller got the support of runtime PM and the support
of D3 clock-stop. Also changing the power_save option in sysfs
kicks off immediately to enable / disable the power-save mode.
- Another significant code change in HD-audio is the rewrite of
firmware loading code. Other than that, most of changes in
HD-audio are continued cleanups and standardization for the generic
auto parser and bug fixes (HBR, device-specific fixups), in
addition to the support of channel-map API.
- Addition of ASoC bindings for the compressed API, used by the
mid-x86 drivers.
- Lots of cleanups and API refreshes for ASoC codec drivers and
DaVinci.
- Conversion of OMAP to dmaengine.
- New machine driver for Wolfson Microelectronics Bells.
- New CODEC driver for Wolfson Microelectronics WM0010.
- Enhancements to the ux500 and wm2000 drivers
- A new driver for DA9055 and the support for regulator bypass mode."
Fix up various arm soc header file reorg conflicts.
* tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (339 commits)
ALSA: hda - Add new codec ALC283 ALC290 support
ALSA: hda - avoid unneccesary indices on "Headphone Jack" controls
ALSA: hda - fix indices on boost volume on Conexant
ALSA: aloop - add locking to timer access
ALSA: hda - Fix hang caused by race during suspend.
sound: Remove unnecessary semicolon
ALSA: hda/realtek - Fix detection of ALC271X codec
ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310
ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event
ALSA: hda - make a generic unsol event handler
ASoC: codecs: Add DA9055 codec driver
ASoC: eukrea-tlv320: Convert it to platform driver
ALSA: ASoC: add DT bindings for CS4271
ASoC: wm_hubs: Ensure volume updates are handled during class W startup
ASoC: wm5110: Adding missing volume update bits
ASoC: wm5110: Add OUT3R support
ASoC: wm5110: Add AEC loopback support
ASoC: wm5110: Rename EPOUT to HPOUT3
ASoC: arizona: Add more clock rates
ASoC: arizona: Add more DSP options for mixer input muxes
...
Diffstat (limited to 'arch')
35 files changed, 262 insertions, 315 deletions
diff --git a/arch/arm/mach-davinci/asp.h b/arch/arm/mach-davinci/asp.h new file mode 100644 index 0000000..d9b2acd --- /dev/null +++ b/arch/arm/mach-davinci/asp.h @@ -0,0 +1,49 @@ +/* + * TI DaVinci Audio definitions + */ +#ifndef __ASM_ARCH_DAVINCI_ASP_H +#define __ASM_ARCH_DAVINCI_ASP_H + +/* Bases of dm644x and dm355 register banks */ +#define DAVINCI_ASP0_BASE 0x01E02000 +#define DAVINCI_ASP1_BASE 0x01E04000 + +/* Bases of dm365 register banks */ +#define DAVINCI_DM365_ASP0_BASE 0x01D02000 + +/* Bases of dm646x register banks */ +#define DAVINCI_DM646X_MCASP0_REG_BASE 0x01D01000 +#define DAVINCI_DM646X_MCASP1_REG_BASE 0x01D01800 + +/* Bases of da850/da830 McASP0 register banks */ +#define DAVINCI_DA8XX_MCASP0_REG_BASE 0x01D00000 + +/* Bases of da830 McASP1 register banks */ +#define DAVINCI_DA830_MCASP1_REG_BASE 0x01D04000 + +/* EDMA channels of dm644x and dm355 */ +#define DAVINCI_DMA_ASP0_TX 2 +#define DAVINCI_DMA_ASP0_RX 3 +#define DAVINCI_DMA_ASP1_TX 8 +#define DAVINCI_DMA_ASP1_RX 9 + +/* EDMA channels of dm646x */ +#define DAVINCI_DM646X_DMA_MCASP0_AXEVT0 6 +#define DAVINCI_DM646X_DMA_MCASP0_AREVT0 9 +#define DAVINCI_DM646X_DMA_MCASP1_AXEVT1 12 + +/* EDMA channels of da850/da830 McASP0 */ +#define DAVINCI_DA8XX_DMA_MCASP0_AREVT 0 +#define DAVINCI_DA8XX_DMA_MCASP0_AXEVT 1 + +/* EDMA channels of da830 McASP1 */ +#define DAVINCI_DA830_DMA_MCASP1_AREVT 2 +#define DAVINCI_DA830_DMA_MCASP1_AXEVT 3 + +/* Interrupts */ +#define DAVINCI_ASP0_RX_INT IRQ_MBRINT +#define DAVINCI_ASP0_TX_INT IRQ_MBXINT +#define DAVINCI_ASP1_RX_INT IRQ_MBRINT +#define DAVINCI_ASP1_TX_INT IRQ_MBXINT + +#endif /* __ASM_ARCH_DAVINCI_ASP_H */ diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h index a37fc44..12d544b 100644 --- a/arch/arm/mach-davinci/davinci.h +++ b/arch/arm/mach-davinci/davinci.h @@ -22,10 +22,10 @@ #include <linux/davinci_emac.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> - -#include <mach/asp.h> +#include <linux/platform_data/davinci_asp.h> #include <linux/platform_data/keyscan-davinci.h> #include <mach/hardware.h> +#include <mach/edma.h> #include <media/davinci/vpfe_capture.h> #include <media/davinci/vpif_types.h> diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 783eab6..bd2f72b 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -24,6 +24,7 @@ #include <mach/cpuidle.h> #include "clock.h" +#include "asp.h" #define DA8XX_TPCC_BASE 0x01c00000 #define DA8XX_TPTC0_BASE 0x01c08000 @@ -505,15 +506,8 @@ static struct platform_device da850_mcasp_device = { .resource = da850_mcasp_resources, }; -static struct platform_device davinci_pcm_device = { - .name = "davinci-pcm-audio", - .id = -1, -}; - void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata) { - platform_device_register(&davinci_pcm_device); - /* DA830/OMAP-L137 has 3 instances of McASP */ if (cpu_is_davinci_da830() && id == 1) { da830_mcasp1_device.dev.platform_data = pdata; diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 3a42b6f..4c48a36 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -313,16 +313,6 @@ static void davinci_init_wdt(void) /*-------------------------------------------------------------------------*/ -static struct platform_device davinci_pcm_device = { - .name = "davinci-pcm-audio", - .id = -1, -}; - -static void davinci_init_pcm(void) -{ - platform_device_register(&davinci_pcm_device); -} - /*-------------------------------------------------------------------------*/ struct davinci_timer_instance davinci_timer_instance[2] = { @@ -345,7 +335,6 @@ static int __init davinci_init_devices(void) /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ - davinci_init_pcm(); davinci_init_wdt(); return 0; diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index adbde33..a255434 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -26,13 +26,13 @@ #include <mach/time.h> #include <mach/serial.h> #include <mach/common.h> -#include <mach/asp.h> #include <linux/platform_data/spi-davinci.h> #include <mach/gpio-davinci.h> #include "davinci.h" #include "clock.h" #include "mux.h" +#include "asp.h" #define DM355_UART2_BASE (IO_PHYS + 0x206000) diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 719e22f..b680c83 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -29,7 +29,6 @@ #include <mach/time.h> #include <mach/serial.h> #include <mach/common.h> -#include <mach/asp.h> #include <linux/platform_data/keyscan-davinci.h> #include <linux/platform_data/spi-davinci.h> #include <mach/gpio-davinci.h> @@ -37,6 +36,7 @@ #include "davinci.h" #include "clock.h" #include "mux.h" +#include "asp.h" #define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 EVM */ diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index c8b8666..0755d46 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -23,12 +23,12 @@ #include <mach/time.h> #include <mach/serial.h> #include <mach/common.h> -#include <mach/asp.h> #include <mach/gpio-davinci.h> #include "davinci.h" #include "clock.h" #include "mux.h" +#include "asp.h" /* * Device specific clocks diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 9eb87c1..97c0f8e 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -24,12 +24,12 @@ #include <mach/time.h> #include <mach/serial.h> #include <mach/common.h> -#include <mach/asp.h> #include <mach/gpio-davinci.h> #include "davinci.h" #include "clock.h" #include "mux.h" +#include "asp.h" #define DAVINCI_VPIF_BASE (0x01C12000) diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h deleted file mode 100644 index 9aa2409..0000000 --- a/arch/arm/mach-davinci/include/mach/asp.h +++ /dev/null @@ -1,137 +0,0 @@ -/* - * <mach/asp.h> - DaVinci Audio Serial Port support - */ -#ifndef __ASM_ARCH_DAVINCI_ASP_H -#define __ASM_ARCH_DAVINCI_ASP_H - -#include <mach/irqs.h> -#include <mach/edma.h> - -/* Bases of dm644x and dm355 register banks */ -#define DAVINCI_ASP0_BASE 0x01E02000 -#define DAVINCI_ASP1_BASE 0x01E04000 - -/* Bases of dm365 register banks */ -#define DAVINCI_DM365_ASP0_BASE 0x01D02000 - -/* Bases of dm646x register banks */ -#define DAVINCI_DM646X_MCASP0_REG_BASE 0x01D01000 -#define DAVINCI_DM646X_MCASP1_REG_BASE 0x01D01800 - -/* Bases of da850/da830 McASP0 register banks */ -#define DAVINCI_DA8XX_MCASP0_REG_BASE 0x01D00000 - -/* Bases of da830 McASP1 register banks */ -#define DAVINCI_DA830_MCASP1_REG_BASE 0x01D04000 - -/* EDMA channels of dm644x and dm355 */ -#define DAVINCI_DMA_ASP0_TX 2 -#define DAVINCI_DMA_ASP0_RX 3 -#define DAVINCI_DMA_ASP1_TX 8 -#define DAVINCI_DMA_ASP1_RX 9 - -/* EDMA channels of dm646x */ -#define DAVINCI_DM646X_DMA_MCASP0_AXEVT0 6 -#define DAVINCI_DM646X_DMA_MCASP0_AREVT0 9 -#define DAVINCI_DM646X_DMA_MCASP1_AXEVT1 12 - -/* EDMA channels of da850/da830 McASP0 */ -#define DAVINCI_DA8XX_DMA_MCASP0_AREVT 0 -#define DAVINCI_DA8XX_DMA_MCASP0_AXEVT 1 - -/* EDMA channels of da830 McASP1 */ -#define DAVINCI_DA830_DMA_MCASP1_AREVT 2 -#define DAVINCI_DA830_DMA_MCASP1_AXEVT 3 - -/* Interrupts */ -#define DAVINCI_ASP0_RX_INT IRQ_MBRINT -#define DAVINCI_ASP0_TX_INT IRQ_MBXINT -#define DAVINCI_ASP1_RX_INT IRQ_MBRINT -#define DAVINCI_ASP1_TX_INT IRQ_MBXINT - -struct snd_platform_data { - u32 tx_dma_offset; - u32 rx_dma_offset; - enum dma_event_q asp_chan_q; /* event queue number for ASP channel */ - enum dma_event_q ram_chan_q; /* event queue number for RAM channel */ - unsigned int codec_fmt; - /* - * Allowing this is more efficient and eliminates left and right swaps - * caused by underruns, but will swap the left and right channels - * when compared to previous behavior. - */ - unsigned enable_channel_combine:1; - unsigned sram_size_playback; - unsigned sram_size_capture; - - /* - * If McBSP peripheral gets the clock from an external pin, - * there are three chooses, that are MCBSP_CLKX, MCBSP_CLKR - * and MCBSP_CLKS. - * Depending on different hardware connections it is possible - * to use this setting to change the behaviour of McBSP - * driver. The dm365_clk_input_pin enum is available for dm365 - */ - int clk_input_pin; - - /* - * This flag works when both clock and FS are outputs for the cpu - * and makes clock more accurate (FS is not symmetrical and the - * clock is very fast. - * The clock becoming faster is named - * i2s continuous serial clock (I2S_SCK) and it is an externally - * visible bit clock. - * - * first line : WordSelect - * second line : ContinuousSerialClock - * third line: SerialData - * - * SYMMETRICAL APPROACH: - * _______________________ LEFT - * _| RIGHT |______________________| - * _ _ _ _ _ _ _ _ - * _| |_| |_ x16 _| |_| |_| |_| |_ x16 _| |_| |_ - * _ _ _ _ _ _ _ _ - * _/ \_/ \_ ... _/ \_/ \_/ \_/ \_ ... _/ \_/ \_ - * \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ - * - * ACCURATE CLOCK APPROACH: - * ______________ LEFT - * _| RIGHT |_______________________________| - * _ _ _ _ _ _ _ _ _ - * _| |_ x16 _| |_| |_ x16 _| |_| |_| |_| |_| |_| | - * _ _ _ _ dummy cycles - * _/ \_ ... _/ \_/ \_ ... _/ \__________________ - * \_/ \_/ \_/ \_/ - * - */ - bool i2s_accurate_sck; - - /* McASP specific fields */ - int tdm_slots; - u8 op_mode; - u8 num_serializer; - u8 *serial_dir; - u8 version; - u8 txnumevt; - u8 rxnumevt; -}; - -enum { - MCASP_VERSION_1 = 0, /* DM646x */ - MCASP_VERSION_2, /* DA8xx/OMAPL1x */ -}; - -enum dm365_clk_input_pin { - MCBSP_CLKR = 0, /* DM365 */ - MCBSP_CLKS, -}; - -#define INACTIVE_MODE 0 -#define TX_MODE 1 -#define RX_MODE 2 - -#define DAVINCI_MCASP_IIS_MODE 0 -#define DAVINCI_MCASP_DIT_MODE 1 - -#endif /* __ASM_ARCH_DAVINCI_ASP_H */ diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 33e78ae..c9ee723 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -16,10 +16,10 @@ #include <linux/platform_device.h> #include <linux/davinci_emac.h> #include <linux/spi/spi.h> +#include <linux/platform_data/davinci_asp.h> #include <mach/serial.h> #include <mach/edma.h> -#include <mach/asp.h> #include <mach/pm.h> #include <linux/platform_data/i2c-davinci.h> #include <linux/platform_data/mmc-davinci.h> diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index fd3177f..98aef57 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -348,4 +348,5 @@ void __init eukrea_mbimx27_baseboard_init(void) imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data); gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info); + imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); } diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c index dfd2da8..0b84666 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c @@ -306,4 +306,5 @@ void __init eukrea_mbimxsd25_baseboard_init(void) platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); gpio_led_register_device(-1, &eukrea_mbimxsd_led_info); imx_add_gpio_keys(&eukrea_mbimxsd_button_data); + imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); } diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c index 6e9dd12..c6532a0 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c @@ -315,4 +315,5 @@ void __init eukrea_mbimxsd35_baseboard_init(void) platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); gpio_led_register_device(-1, &eukrea_mbimxsd_led_info); imx_add_gpio_keys(&eukrea_mbimxsd_button_data); + imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); } diff --git a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c index 96a24b7..8b0de30 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c @@ -228,4 +228,5 @@ void __init eukrea_mbimxsd51_baseboard_init(void) gpio_led_register_device(-1, &eukrea_mbimxsd51_led_info); imx_add_gpio_keys(&eukrea_mbimxsd51_button_data); + imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); } diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 821d6aa..141756f 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -32,6 +32,7 @@ #include <linux/delay.h> #include <linux/dma-mapping.h> #include <linux/leds.h> +#include <linux/platform_data/asoc-mx27vis.h> #include <media/soc_camera.h> #include <sound/tlv320aic32x4.h> #include <asm/mach-types.h> @@ -58,6 +59,11 @@ #define EXPBOARD_BIT1 (GPIO_PORTD + 27) #define EXPBOARD_BIT0 (GPIO_PORTD + 28) +#define AMP_GAIN_0 (GPIO_PORTF + 9) +#define AMP_GAIN_1 (GPIO_PORTF + 8) +#define AMP_MUTE_SDL (GPIO_PORTE + 5) +#define AMP_MUTE_SDR (GPIO_PORTF + 7) + static const int visstrim_m10_pins[] __initconst = { /* UART1 (console) */ PE12_PF_UART1_TXD, @@ -139,6 +145,11 @@ static const int visstrim_m10_pins[] __initconst = { EXPBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, EXPBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, EXPBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, + /* Audio AMP control */ + AMP_GAIN_0 | GPIO_GPIO | GPIO_OUT, + AMP_GAIN_1 | GPIO_GPIO | GPIO_OUT, + AMP_MUTE_SDL | GPIO_GPIO | GPIO_OUT, + AMP_MUTE_SDR | GPIO_GPIO | GPIO_OUT, }; static struct gpio visstrim_m10_version_gpios[] = { @@ -166,6 +177,26 @@ static const struct gpio visstrim_m10_gpios[] __initconst = { .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW, .label = "usbotg_cs", }, + { + .gpio = AMP_GAIN_0, + .flags = GPIOF_DIR_OUT, + .label = "amp-gain-0", + }, + { + .gpio = AMP_GAIN_1, + .flags = GPIOF_DIR_OUT, + .label = "amp-gain-1", + }, + { + .gpio = AMP_MUTE_SDL, + .flags = GPIOF_DIR_OUT, + .label = "amp-mute-sdl", + }, + { + .gpio = AMP_MUTE_SDR, + .flags = GPIOF_DIR_OUT, + .label = "amp-mute-sdr", + }, }; /* Camera */ @@ -444,6 +475,14 @@ static void __init visstrim_deinterlace_init(void) } +/* Audio */ +static const struct snd_mx27vis_platform_data snd_mx27vis_pdata __initconst = { + .amp_gain0_gpio = AMP_GAIN_0, + .amp_gain1_gpio = AMP_GAIN_1, + .amp_mutel_gpio = AMP_MUTE_SDL, + .amp_muter_gpio = AMP_MUTE_SDR, +}; + static void __init visstrim_m10_revision(void) { int exp_version = 0; @@ -502,7 +541,8 @@ static void __init visstrim_m10_board_init(void) imx27_add_fec(NULL); imx_add_gpio_keys(&visstrim_gpio_keys_platform_data); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx_add_platform_device("mx27vis", 0, NULL, 0, NULL, 0); + imx_add_platform_device("mx27vis", 0, NULL, 0, &snd_mx27vis_pdata, + sizeof(snd_mx27vis_pdata)); platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0, &iclink_tvp5150, sizeof(iclink_tvp5150)); gpio_led_register_device(0, &visstrim_m10_led_data); diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 0d99c91..e162897 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -263,6 +263,16 @@ static __init void am3517_evm_musb_init(void) usb_musb_init(&musb_board_data); } +static __init void am3517_evm_mcbsp1_init(void) +{ + u32 devconf0; + + /* McBSP1 CLKR/FSR signal to be connected to CLKX/FSX pin */ + devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + devconf0 |= OMAP2_MCBSP1_CLKR_MASK | OMAP2_MCBSP1_FSR_MASK; + omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0); +} + static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ @@ -366,6 +376,9 @@ static void __init am3517_evm_init(void) /* MUSB */ am3517_evm_musb_init(); + /* McBSP1 */ + am3517_evm_mcbsp1_init(); + /* MMC init function */ omap_hsmmc_init(mmc); } diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 8ffd612..376d26e 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -723,6 +723,7 @@ static void __init cm_t3x_common_init(void) cm_t35_init_ethernet(); cm_t35_init_led(); cm_t35_init_display(); + omap_twl4030_audio_init("cm-t3x"); usb_musb_init(NULL); cm_t35_init_usbh(); diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 7bb8056..1fd161e 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -623,6 +623,7 @@ static void __init devkit8000_init(void) usbhs_init(&usbhs_bdata); omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions, ARRAY_SIZE(devkit8000_nand_partitions)); + omap_twl4030_audio_init("omap3beagle"); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index fb8bd83..48d5e41 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -625,6 +625,7 @@ static void __init igep_init(void) igep_flash_init(); igep_leds_init(); + omap_twl4030_audio_init("igep2"); /* * WLAN-BT combo module from MuRata which has a Marvell WLAN diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 68ff8d5..a08bebc 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -514,6 +514,7 @@ static void __init omap3_beagle_init(void) usbhs_init(&usbhs_bdata); omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, ARRAY_SIZE(omap3beagle_nand_partitions)); + omap_twl4030_audio_init("omap3beagle"); /* Ensure msecure is mux'd to be able to set the RTC. */ omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index c64e565..a3959de 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -739,6 +739,7 @@ static void __init omap3_evm_init(void) omap3evm_init_smsc911x(); omap3_evm_display_init(); omap3_evm_wl12xx_init(); + omap_twl4030_audio_init("omap3evm"); } MACHINE_START(OMAP3EVM, "OMAP3 EVM") diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 2e7f240..b700685 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -504,6 +504,7 @@ static void __init overo_init(void) overo_display_init(); overo_init_led(); overo_init_keys(); + omap_twl4030_audio_init("overo"); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 6bcc107..67f8540 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -35,6 +35,7 @@ #include "common-board-devices.h" #define OMAP_ZOOM_WLAN_PMENA_GPIO (101) +#define ZOOM2_HEADSET_EXTMUTE_GPIO (153) #define OMAP_ZOOM_WLAN_IRQ_GPIO (162) #define LCD_PANEL_ENABLE_GPIO (7 + OMAP_MAX_GPIO_LINES) @@ -245,12 +246,6 @@ static int zoom_twl_gpio_setup(struct device *dev, return ret; } -/* EXTMUTE callback function */ -static void zoom2_set_hs_extmute(int mute) -{ - gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute); -} - static struct twl4030_gpio_platform_data zoom_gpio_data = { .setup = zoom_twl_gpio_setup, }; @@ -277,7 +272,7 @@ static int __init omap_i2c_init(void) codec_data->ramp_delay_value = 3; /* 161 ms */ codec_data->hs_extmute = 1; - codec_data->set_hs_extmute = zoom2_set_hs_extmute; + codec_data->hs_extmute_gpio = ZOOM2_HEADSET_EXTMUTE_GPIO; } omap_pmic_init(1, 2400, "twl5030", 7 + OMAP_INTC_START, &zoom_twldata); omap_register_i2c_bus(2, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/include/mach/board-zoom.h index 775fdc3..2e94869 100644 --- a/arch/arm/mach-omap2/include/mach/board-zoom.h +++ b/arch/arm/mach-omap2/include/mach/board-zoom.h @@ -8,5 +8,3 @@ extern int __init zoom_debugboard_init(void); extern void __init zoom_peripherals_init(void); extern void __init zoom_display_init(void); - -#define ZOOM2_HEADSET_EXTMUTE_GPIO 153 diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 7d47407..37f8f94 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -15,6 +15,7 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/platform_data/asoc-ti-mcbsp.h> @@ -23,8 +24,6 @@ #include <plat/omap_device.h> #include <linux/pm_runtime.h> -#include "control.h" - /* * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle. * Sidetone needs non-gated ICLK and sidetone autoidle is broken. @@ -32,112 +31,6 @@ #include "cm2xxx_3xxx.h" #include "cm-regbits-34xx.h" -/* McBSP1 internal signal muxing function for OMAP2/3 */ -static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal, - const char *src) -{ - u32 v; - - v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - - if (!strcmp(signal, "clkr")) { - if (!strcmp(src, "clkr")) - v &= ~OMAP2_MCBSP1_CLKR_MASK; - else if (!strcmp(src, "clkx")) - v |= OMAP2_MCBSP1_CLKR_MASK; - else - return -EINVAL; - } else if (!strcmp(signal, "fsr")) { - if (!strcmp(src, "fsr")) - v &= ~OMAP2_MCBSP1_FSR_MASK; - else if (!strcmp(src, "fsx")) - v |= OMAP2_MCBSP1_FSR_MASK; - else - return -EINVAL; - } else { - return -EINVAL; - } - - omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); - - return 0; -} - -/* McBSP4 internal signal muxing function for OMAP4 */ -#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX (1 << 31) -#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX (1 << 30) -static int omap4_mcbsp4_mux_rx_clk(struct device *dev, const char *signal, - const char *src) -{ - u32 v; - - /* - * In CONTROL_MCBSPLP register only bit 30 (CLKR mux), and bit 31 (FSR - * mux) is used */ - v = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP); - - if (!strcmp(signal, "clkr")) { - if (!strcmp(src, "clkr")) - v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX; - else if (!strcmp(src, "clkx")) - v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX; - else - return -EINVAL; - } else if (!strcmp(signal, "fsr")) { - if (!strcmp(src, "fsr")) - v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX; - else if (!strcmp(src, "fsx")) - v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX; - else - return -EINVAL; - } else { - return -EINVAL; - } - - omap4_ctrl_pad_writel(v, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP); - - return 0; -} - -/* McBSP CLKS source switching function */ -static int omap2_mcbsp_set_clk_src(struct device *dev, struct clk *clk, - const char *src) -{ - struct clk *fck_src; - char *fck_src_name; - int r; - - if (!strcmp(src, "clks_ext")) - fck_src_name = "pad_fck"; - else if (!strcmp(src, "clks_fclk")) - fck_src_name = "prcm_fck"; - else - return -EINVAL; - - fck_src = clk_get(dev, fck_src_name); - if (IS_ERR_OR_NULL(fck_src)) { - pr_err("omap-mcbsp: %s: could not clk_get() %s\n", "clks", - fck_src_name); - return -EINVAL; - } - - pm_runtime_put_sync(dev); - - r = clk_set_parent(clk, fck_src); - if (IS_ERR_VALUE(r)) { - pr_err("omap-mcbsp: %s: could not clk_set_parent() to %s\n", - "clks", fck_src_name); - clk_put(fck_src); - return -EINVAL; - } - - pm_runtime_get_sync(dev); - - clk_put(fck_src); - - return 0; -} - static int omap3_enable_st_clock(unsigned int id, bool enable) { unsigned int w; @@ -179,17 +72,11 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused) pdata->reg_size = 4; pdata->has_ccr = true; } - pdata->set_clk_src = omap2_mcbsp_set_clk_src; - - /* On OMAP2/3 the McBSP1 port has 6 pin configuration */ - if (id == 1 && oh->class->rev < MCBSP_CONFIG_TYPE4) - pdata->mux_signal = omap2_mcbsp1_mux_rx_clk; - /* On OMAP4 the McBSP4 port has 6 pin configuration */ - if (id == 4 && oh->class->rev == MCBSP_CONFIG_TYPE4) - pdata->mux_signal = omap4_mcbsp4_mux_rx_clk; - - if (oh->class->rev == MCBSP_CONFIG_TYPE3) { + if (oh->class->rev == MCBSP_CONFIG_TYPE2) { + /* The FIFO has 128 locations */ + pdata->buffer_size = 0x80; + } else if (oh->class->rev == MCBSP_CONFIG_TYPE3) { if (id == 2) /* The FIFO has 1024 + 256 locations */ pdata->buffer_size = 0x500; @@ -225,7 +112,8 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused) static int __init omap2_mcbsp_init(void) { - omap_hwmod_for_each_by_class("mcbsp", omap_init_mcbsp, NULL); + if (!of_have_populated_dt()) + omap_hwmod_for_each_by_class("mcbsp", omap_init_mcbsp, NULL); return 0; } diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 8d7a935..652d028 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -5269,6 +5269,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__mcbsp4 = { static struct omap_hwmod_addr_space omap44xx_mcpdm_addrs[] = { { + .name = "mpu", .pa_start = 0x40132000, .pa_end = 0x4013207f, .flags = ADDR_TYPE_RT @@ -5287,6 +5288,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm = { static struct omap_hwmod_addr_space omap44xx_mcpdm_dma_addrs[] = { { + .name = "dma", .pa_start = 0x49032000, .pa_end = 0x4903207f, .flags = ADDR_TYPE_RT diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 45f7741..18a8519 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -519,3 +519,30 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, pmic_data->v2v1 = &omap4_v2v1_idata; } #endif /* CONFIG_ARCH_OMAP4 */ + +#if defined(CONFIG_SND_OMAP_SOC_OMAP_TWL4030) || \ + defined(CONFIG_SND_OMAP_SOC_OMAP_TWL4030_MODULE) +#include <linux/platform_data/omap-twl4030.h> + +static struct omap_tw4030_pdata omap_twl4030_audio_data; + +static struct platform_device audio_device = { + .name = "omap-twl4030", + .id = -1, + .dev = { + .platform_data = &omap_twl4030_audio_data, + }, +}; + +void __init omap_twl4030_audio_init(char *card_name) +{ + omap_twl4030_audio_data.card_name = card_name; + platform_device_register(&audio_device); +} + +#else /* SOC_OMAP_TWL4030 */ +void __init omap_twl4030_audio_init(char *card_name) +{ + return; +} +#endif /* SOC_OMAP_TWL4030 */ diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index 2256efe..dcfbad5 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -60,4 +60,6 @@ void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, void omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags); +void omap_twl4030_audio_init(char *card_name); + #endif /* __OMAP_PMIC_COMMON__ */ diff --git a/arch/arm/mach-tegra/include/mach/tegra_wm8903_pdata.h b/arch/arm/mach-tegra/include/mach/tegra_wm8903_pdata.h deleted file mode 100644 index 9d29334..0000000 --- a/arch/arm/mach-tegra/include/mach/tegra_wm8903_pdata.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/arm/mach-tegra/include/mach/tegra_wm8903_pdata.h - * - * Copyright 2011 NVIDIA, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -struct tegra_wm8903_platform_data { - int gpio_spkr_en; - int gpio_hp_det; - int gpio_hp_mute; - int gpio_int_mic_en; - int gpio_ext_mic_en; -}; diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c index c38d754..d088afa 100644 --- a/arch/arm/plat-samsung/dma-ops.c +++ b/arch/arm/plat-samsung/dma-ops.c @@ -91,7 +91,8 @@ static int samsung_dmadev_prepare(unsigned ch, break; case DMA_CYCLIC: desc = dmaengine_prep_dma_cyclic(chan, param->buf, - param->len, param->period, param->direction); + param->len, param->period, param->direction, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); break; default: dev_err(&chan->dev->device, "unsupported format\n"); diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index fc179ca..29f16e5 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -587,6 +587,21 @@ static struct platform_device bfin_tdm = { }; #endif +#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \ + || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +static const char * const ad1836_link[] = { + "bfin-tdm.0", + "spi0.4", +}; +static struct platform_device bfin_ad1836_machine = { + .name = "bfin-snd-ad1836", + .id = -1, + .dev = { + .platform_data = (void *)ad1836_link, + }, +}; +#endif + static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -1269,6 +1284,11 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) &bfin_tdm, #endif + +#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \ + defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) + &bfin_ad1836_machine, +#endif }; static int __init ezkit_init(void) diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index ce88a71..6fca869 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -617,6 +617,21 @@ static struct platform_device bfin_ac97_pcm = { }; #endif +#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \ + || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +static const char * const ad1836_link[] = { + "bfin-tdm.0", + "spi0.4", +}; +static struct platform_device bfin_ad1836_machine = { + .name = "bfin-snd-ad1836", + .id = -1, + .dev = { + .platform_data = (void *)ad1836_link, + }, +}; +#endif + #if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \ defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) static const unsigned ad73311_gpio[] = { @@ -754,6 +769,11 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_ac97_pcm, #endif +#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \ + defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) + &bfin_ad1836_machine, +#endif + #if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \ defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) &bfin_ad73311_machine, diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 5ed654a..307bd7e 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -2641,6 +2641,21 @@ static struct platform_device bfin_ac97_pcm = { }; #endif +#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \ + || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +static const char * const ad1836_link[] = { + "bfin-tdm.0", + "spi0.4", +}; +static struct platform_device bfin_ad1836_machine = { + .name = "bfin-snd-ad1836", + .id = -1, + .dev = { + .platform_data = (void *)ad1836_link, + }, +}; +#endif + #if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \ defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) static const unsigned ad73311_gpio[] = { @@ -2927,6 +2942,11 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_ac97_pcm, #endif +#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \ + defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) + &bfin_ad1836_machine, +#endif + #if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \ defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) &bfin_ad73311_machine, diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 7c36777..551f866 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -539,6 +539,21 @@ static struct platform_device bfin_ac97 = { }; #endif +#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \ + || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +static const char * const ad1836_link[] = { + "bfin-tdm.0", + "spi0.4", +}; +static struct platform_device bfin_ad1836_machine = { + .name = "bfin-snd-ad1836", + .id = -1, + .dev = { + .platform_data = (void *)ad1836_link, + }, +}; +#endif + static struct platform_device *ezkit_devices[] __initdata = { &bfin_dpmc, @@ -603,6 +618,11 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) &bfin_ac97, #endif + +#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \ + defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) + &bfin_ad1836_machine, +#endif }; static int __init net2272_init(void) diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c index c2cf1ae..61c1f47 100644 --- a/arch/blackfin/mach-bf609/boards/ezkit.c +++ b/arch/blackfin/mach-bf609/boards/ezkit.c @@ -818,6 +818,21 @@ static struct platform_device bfin_i2s = { }; #endif +#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \ + || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +static const char * const ad1836_link[] = { + "bfin-tdm.0", + "spi0.76", +}; +static struct platform_device bfin_ad1836_machine = { + .name = "bfin-snd-ad1836", + .id = -1, + .dev = { + .platform_data = (void *)ad1836_link, + }, +}; +#endif + #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) || \ defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61_MODULE) static struct platform_device adau1761_device = { @@ -1557,6 +1572,10 @@ static struct platform_device *ezkit_devices[] __initdata = { defined(CONFIG_SND_BF6XX_SOC_I2S_MODULE) &bfin_i2s, #endif +#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \ + defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) + &bfin_ad1836_machine, +#endif #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) || \ defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61_MODULE) &adau1761_device, |