diff options
author | Jeff Garzik <jeff@garzik.org> | 2007-07-13 21:06:45 (GMT) |
---|---|---|
committer | Jeff Garzik <jeff@garzik.org> | 2007-07-20 09:58:25 (GMT) |
commit | 0ea9e179f436f153fc19fdaef7abbc1e0da20762 (patch) | |
tree | af89a85b97cf1eb34396d5941bb7a86d45904726 /drivers/ata | |
parent | 6c1153e00af8de755ec278d873a97c9ce2a72d10 (diff) | |
download | linux-0ea9e179f436f153fc19fdaef7abbc1e0da20762.tar.xz |
[libata] sata_mv: minor cleanups
* trim trailing whitespace
* document some flags, registers, and register bits
* fix locking around EDMA on/off and configuration
* continue replacing "constant OP var" with "var OP constant"
* use new pci_try_set_mwi()
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/ata')
-rw-r--r-- | drivers/ata/sata_mv.c | 62 |
1 files changed, 38 insertions, 24 deletions
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 0ccd990..80ade5b 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -35,8 +35,6 @@ 6) Add port multiplier support (intermediate) - 7) Test and verify 3.0 Gbps support - 8) Develop a low-power-consumption strategy, and implement it. 9) [Experiment, low priority] See if ATAPI can be supported using @@ -286,10 +284,10 @@ enum { EDMA_RSP_Q_OUT_PTR_OFS = 0x24, /* also contains BASE_LO */ EDMA_RSP_Q_PTR_SHIFT = 3, - EDMA_CMD_OFS = 0x28, - EDMA_EN = (1 << 0), - EDMA_DS = (1 << 1), - ATA_RST = (1 << 2), + EDMA_CMD_OFS = 0x28, /* EDMA command register */ + EDMA_EN = (1 << 0), /* enable EDMA */ + EDMA_DS = (1 << 1), /* disable EDMA; self-negated */ + ATA_RST = (1 << 2), /* reset trans/link/phy */ EDMA_IORDY_TMOUT = 0x34, EDMA_ARB_CFG = 0x38, @@ -301,14 +299,13 @@ enum { MV_HP_ERRATA_60X1B2 = (1 << 3), MV_HP_ERRATA_60X1C0 = (1 << 4), MV_HP_ERRATA_XX42A0 = (1 << 5), - MV_HP_GEN_I = (1 << 6), - MV_HP_GEN_II = (1 << 7), - MV_HP_GEN_IIE = (1 << 8), + MV_HP_GEN_I = (1 << 6), /* Generation I: 50xx */ + MV_HP_GEN_II = (1 << 7), /* Generation II: 60xx */ + MV_HP_GEN_IIE = (1 << 8), /* Generation IIE: 6042/7042 */ /* Port private flags (pp_flags) */ - MV_PP_FLAG_EDMA_EN = (1 << 0), - MV_PP_FLAG_EDMA_DS_ACT = (1 << 1), - MV_PP_FLAG_HAD_A_RESET = (1 << 2), + MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */ + MV_PP_FLAG_HAD_A_RESET = (1 << 2), /* 1st hard reset complete? */ }; #define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I) @@ -318,8 +315,12 @@ enum { enum { MV_DMA_BOUNDARY = 0xffffffffU, + /* mask of register bits containing lower 32 bits + * of EDMA request queue DMA address + */ EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U, + /* ditto, for response queue */ EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U, }; @@ -823,7 +824,7 @@ static void mv_start_dma(void __iomem *base, struct mv_host_priv *hpriv, } /** - * mv_stop_dma - Disable eDMA engine + * __mv_stop_dma - Disable eDMA engine * @ap: ATA channel to manipulate * * Verify the local cache of the eDMA state is accurate with a @@ -832,7 +833,7 @@ static void mv_start_dma(void __iomem *base, struct mv_host_priv *hpriv, * LOCKING: * Inherited from caller. */ -static int mv_stop_dma(struct ata_port *ap) +static int __mv_stop_dma(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); struct mv_port_priv *pp = ap->private_data; @@ -865,6 +866,18 @@ static int mv_stop_dma(struct ata_port *ap) return err; } +static int mv_stop_dma(struct ata_port *ap) +{ + unsigned long flags; + int rc; + + spin_lock_irqsave(&ap->host->lock, flags); + rc = __mv_stop_dma(ap); + spin_unlock_irqrestore(&ap->host->lock, flags); + + return rc; +} + #ifdef ATA_DEBUG static void mv_dump_mem(void __iomem *start, unsigned bytes) { @@ -965,7 +978,7 @@ static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in) { unsigned int ofs = mv_scr_offset(sc_reg_in); - if (0xffffffffU != ofs) + if (ofs != 0xffffffffU) return readl(mv_ap_base(ap) + ofs); else return (u32) ofs; @@ -975,7 +988,7 @@ static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) { unsigned int ofs = mv_scr_offset(sc_reg_in); - if (0xffffffffU != ofs) + if (ofs != 0xffffffffU) writelfl(val, mv_ap_base(ap) + ofs); } @@ -1029,6 +1042,7 @@ static int mv_port_start(struct ata_port *ap) void __iomem *port_mmio = mv_ap_base(ap); void *mem; dma_addr_t mem_dma; + unsigned long flags; int rc; pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); @@ -1067,10 +1081,14 @@ static int mv_port_start(struct ata_port *ap) pp->sg_tbl = mem; pp->sg_tbl_dma = mem_dma; + spin_lock_irqsave(&ap->host->lock, flags); + mv_edma_cfg(ap, hpriv, port_mmio); mv_set_edma_ptrs(port_mmio, hpriv, pp); + spin_unlock_irqrestore(&ap->host->lock, flags); + /* Don't turn on EDMA here...do it before DMA commands only. Else * we'll be unable to send non-data, PIO, etc due to restricted access * to shadow regs. @@ -1090,11 +1108,7 @@ static int mv_port_start(struct ata_port *ap) */ static void mv_port_stop(struct ata_port *ap) { - unsigned long flags; - - spin_lock_irqsave(&ap->host->lock, flags); mv_stop_dma(ap); - spin_unlock_irqrestore(&ap->host->lock, flags); } /** @@ -1325,7 +1339,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) * port. Turn off EDMA so there won't be problems accessing * shadow block, etc registers. */ - mv_stop_dma(ap); + __mv_stop_dma(ap); return ata_qc_issue_prot(qc); } @@ -1497,7 +1511,7 @@ static void mv_intr_edma(struct ata_port *ap) break; /* 50xx: get active ATA command */ - if (IS_GEN_I(hpriv)) + if (IS_GEN_I(hpriv)) tag = ap->active_tag; /* Gen II/IIE: get active ATA command via tag, to enable @@ -1532,7 +1546,7 @@ static void mv_intr_edma(struct ata_port *ap) ata_qc_complete(qc); } - /* advance software response queue pointer, to + /* advance software response queue pointer, to * indicate (after the loop completes) to hardware * that we have consumed a response queue entry. */ @@ -2206,7 +2220,7 @@ static int mv_prereset(struct ata_port *ap, unsigned long deadline) struct mv_port_priv *pp = ap->private_data; struct ata_eh_context *ehc = &ap->eh_context; int rc; - + rc = mv_stop_dma(ap); if (rc) ehc->i.action |= ATA_EH_HARDRESET; |