Merge tag 'v3.15-rc6' into sched/core, to pick up the latest fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

9 files changed, 264 insertions, 45 deletions

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 20e03a7..0033faf 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -116,7 +116,7 @@ config AHCI_ST
 
 config AHCI_IMX
 	tristate "Freescale i.MX AHCI SATA support"
-	depends on MFD_SYSCON
+	depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
 	help
 	  This option enables support for the Freescale i.MX SoC's
 	  onboard AHCI SATA.
@@ -134,8 +134,7 @@ config AHCI_SUNXI
 
 config AHCI_XGENE
 	tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
-	depends on ARM64 || COMPILE_TEST
-	select PHY_XGENE
+	depends on PHY_XGENE
 	help
 	 This option enables support for APM X-Gene SoC SATA host controller.
 
@@ -816,7 +815,7 @@ config PATA_AT32
 
 config PATA_AT91
 	tristate "PATA support for AT91SAM9260"
-	depends on ARM && ARCH_AT91
+	depends on ARM && SOC_AT91SAM9
 	help
 	  This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
 
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 5a0bf8e..6070781 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1115,6 +1115,17 @@ static bool ahci_broken_online(struct pci_dev *pdev)
 	return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff);
 }
 
+static bool ahci_broken_devslp(struct pci_dev *pdev)
+{
+	/* device with broken DEVSLP but still showing SDS capability */
+	static const struct pci_device_id ids[] = {
+		{ PCI_VDEVICE(INTEL, 0x0f23)}, /* Valleyview SoC */
+		{}
+	};
+
+	return pci_match_id(ids, pdev);
+}
+
 #ifdef CONFIG_ATA_ACPI
 static void ahci_gtf_filter_workaround(struct ata_host *host)
 {
@@ -1164,9 +1175,9 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host)
 #endif
 
 static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports,
-			 struct ahci_host_priv *hpriv)
+				struct ahci_host_priv *hpriv)
 {
-	int nvec;
+	int rc, nvec;
 
 	if (hpriv->flags & AHCI_HFLAG_NO_MSI)
 		goto intx;
@@ -1183,12 +1194,19 @@ static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports,
 	if (nvec < n_ports)
 		goto single_msi;
 
-	nvec = pci_enable_msi_range(pdev, nvec, nvec);
-	if (nvec == -ENOSPC)
+	rc = pci_enable_msi_exact(pdev, nvec);
+	if (rc == -ENOSPC)
 		goto single_msi;
-	else if (nvec < 0)
+	else if (rc < 0)
 		goto intx;
 
+	/* fallback to single MSI mode if the controller enforced MRSM mode */
+	if (readl(hpriv->mmio + HOST_CTL) & HOST_MRSM) {
+		pci_disable_msi(pdev);
+		printk(KERN_INFO "ahci: MRSM is on, fallback to single MSI\n");
+		goto single_msi;
+	}
+
 	return nvec;
 
 single_msi:
@@ -1232,18 +1250,18 @@ int ahci_host_activate(struct ata_host *host, int irq, unsigned int n_msis)
 		return rc;
 
 	for (i = 0; i < host->n_ports; i++) {
-		const char* desc;
 		struct ahci_port_priv *pp = host->ports[i]->private_data;
 
-		/* pp is NULL for dummy ports */
-		if (pp)
-			desc = pp->irq_desc;
-		else
-			desc = dev_driver_string(host->dev);
+		/* Do not receive interrupts sent by dummy ports */
+		if (!pp) {
+			disable_irq(irq + i);
+			continue;
+		}
 
-		rc = devm_request_threaded_irq(host->dev,
-			irq + i, ahci_hw_interrupt, ahci_thread_fn, IRQF_SHARED,
-			desc, host->ports[i]);
+		rc = devm_request_threaded_irq(host->dev, irq + i,
+					       ahci_hw_interrupt,
+					       ahci_thread_fn, IRQF_SHARED,
+					       pp->irq_desc, host->ports[i]);
 		if (rc)
 			goto out_free_irqs;
 	}
@@ -1357,6 +1375,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	hpriv->mmio = pcim_iomap_table(pdev)[ahci_pci_bar];
 
+	/* must set flag prior to save config in order to take effect */
+	if (ahci_broken_devslp(pdev))
+		hpriv->flags |= AHCI_HFLAG_NO_DEVSLP;
+
 	/* save initial config */
 	ahci_pci_save_initial_config(pdev, hpriv);
 
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 51af275..af63c75 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -94,6 +94,7 @@ enum {
 	/* HOST_CTL bits */
 	HOST_RESET		= (1 << 0),  /* reset controller; self-clear */
 	HOST_IRQ_EN		= (1 << 1),  /* global IRQ enable */
+	HOST_MRSM		= (1 << 2),  /* MSI Revert to Single Message */
 	HOST_AHCI_EN		= (1 << 31), /* AHCI enabled */
 
 	/* HOST_CAP bits */
@@ -235,6 +236,7 @@ enum {
 						        port start (wait until
 						        error-handling stage) */
 	AHCI_HFLAG_MULTI_MSI		= (1 << 16), /* multiple PCI MSIs */
+	AHCI_HFLAG_NO_DEVSLP		= (1 << 17), /* no device sleep */
 
 	/* ap->flags bits */
 
diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index 497c7ab..8befeb6 100644
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -29,9 +29,25 @@
 #include "ahci.h"
 
 enum {
-	PORT_PHY_CTL = 0x178,			/* Port0 PHY Control */
-	PORT_PHY_CTL_PDDQ_LOC = 0x100000,	/* PORT_PHY_CTL bits */
-	HOST_TIMER1MS = 0xe0,			/* Timer 1-ms */
+	/* Timer 1-ms Register */
+	IMX_TIMER1MS				= 0x00e0,
+	/* Port0 PHY Control Register */
+	IMX_P0PHYCR				= 0x0178,
+	IMX_P0PHYCR_TEST_PDDQ			= 1 << 20,
+	IMX_P0PHYCR_CR_READ			= 1 << 19,
+	IMX_P0PHYCR_CR_WRITE			= 1 << 18,
+	IMX_P0PHYCR_CR_CAP_DATA			= 1 << 17,
+	IMX_P0PHYCR_CR_CAP_ADDR			= 1 << 16,
+	/* Port0 PHY Status Register */
+	IMX_P0PHYSR				= 0x017c,
+	IMX_P0PHYSR_CR_ACK			= 1 << 18,
+	IMX_P0PHYSR_CR_DATA_OUT			= 0xffff << 0,
+	/* Lane0 Output Status Register */
+	IMX_LANE0_OUT_STAT			= 0x2003,
+	IMX_LANE0_OUT_STAT_RX_PLL_STATE		= 1 << 1,
+	/* Clock Reset Register */
+	IMX_CLOCK_RESET				= 0x7f3f,
+	IMX_CLOCK_RESET_RESET			= 1 << 0,
 };
 
 enum ahci_imx_type {
@@ -54,9 +70,149 @@ MODULE_PARM_DESC(hotplug, "AHCI IMX hot-plug support (0=Don't support, 1=support
 
 static void ahci_imx_host_stop(struct ata_host *host);
 
+static int imx_phy_crbit_assert(void __iomem *mmio, u32 bit, bool assert)
+{
+	int timeout = 10;
+	u32 crval;
+	u32 srval;
+
+	/* Assert or deassert the bit */
+	crval = readl(mmio + IMX_P0PHYCR);
+	if (assert)
+		crval |= bit;
+	else
+		crval &= ~bit;
+	writel(crval, mmio + IMX_P0PHYCR);
+
+	/* Wait for the cr_ack signal */
+	do {
+		srval = readl(mmio + IMX_P0PHYSR);
+		if ((assert ? srval : ~srval) & IMX_P0PHYSR_CR_ACK)
+			break;
+		usleep_range(100, 200);
+	} while (--timeout);
+
+	return timeout ? 0 : -ETIMEDOUT;
+}
+
+static int imx_phy_reg_addressing(u16 addr, void __iomem *mmio)
+{
+	u32 crval = addr;
+	int ret;
+
+	/* Supply the address on cr_data_in */
+	writel(crval, mmio + IMX_P0PHYCR);
+
+	/* Assert the cr_cap_addr signal */
+	ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_ADDR, true);
+	if (ret)
+		return ret;
+
+	/* Deassert cr_cap_addr */
+	ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_ADDR, false);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int imx_phy_reg_write(u16 val, void __iomem *mmio)
+{
+	u32 crval = val;
+	int ret;
+
+	/* Supply the data on cr_data_in */
+	writel(crval, mmio + IMX_P0PHYCR);
+
+	/* Assert the cr_cap_data signal */
+	ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_DATA, true);
+	if (ret)
+		return ret;
+
+	/* Deassert cr_cap_data */
+	ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_DATA, false);
+	if (ret)
+		return ret;
+
+	if (val & IMX_CLOCK_RESET_RESET) {
+		/*
+		 * In case we're resetting the phy, it's unable to acknowledge,
+		 * so we return immediately here.
+		 */
+		crval |= IMX_P0PHYCR_CR_WRITE;
+		writel(crval, mmio + IMX_P0PHYCR);
+		goto out;
+	}
+
+	/* Assert the cr_write signal */
+	ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_WRITE, true);
+	if (ret)
+		return ret;
+
+	/* Deassert cr_write */
+	ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_WRITE, false);
+	if (ret)
+		return ret;
+
+out:
+	return 0;
+}
+
+static int imx_phy_reg_read(u16 *val, void __iomem *mmio)
+{
+	int ret;
+
+	/* Assert the cr_read signal */
+	ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_READ, true);
+	if (ret)
+		return ret;
+
+	/* Capture the data from cr_data_out[] */
+	*val = readl(mmio + IMX_P0PHYSR) & IMX_P0PHYSR_CR_DATA_OUT;
+
+	/* Deassert cr_read */
+	ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_READ, false);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int imx_sata_phy_reset(struct ahci_host_priv *hpriv)
+{
+	void __iomem *mmio = hpriv->mmio;
+	int timeout = 10;
+	u16 val;
+	int ret;
+
+	/* Reset SATA PHY by setting RESET bit of PHY register CLOCK_RESET */
+	ret = imx_phy_reg_addressing(IMX_CLOCK_RESET, mmio);
+	if (ret)
+		return ret;
+	ret = imx_phy_reg_write(IMX_CLOCK_RESET_RESET, mmio);
+	if (ret)
+		return ret;
+
+	/* Wait for PHY RX_PLL to be stable */
+	do {
+		usleep_range(100, 200);
+		ret = imx_phy_reg_addressing(IMX_LANE0_OUT_STAT, mmio);
+		if (ret)
+			return ret;
+		ret = imx_phy_reg_read(&val, mmio);
+		if (ret)
+			return ret;
+		if (val & IMX_LANE0_OUT_STAT_RX_PLL_STATE)
+			break;
+	} while (--timeout);
+
+	return timeout ? 0 : -ETIMEDOUT;
+}
+
 static int imx_sata_enable(struct ahci_host_priv *hpriv)
 {
 	struct imx_ahci_priv *imxpriv = hpriv->plat_data;
+	struct device *dev = &imxpriv->ahci_pdev->dev;
 	int ret;
 
 	if (imxpriv->no_device)
@@ -101,6 +257,14 @@ static int imx_sata_enable(struct ahci_host_priv *hpriv)
 		regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
 				   IMX6Q_GPR13_SATA_MPLL_CLK_EN,
 				   IMX6Q_GPR13_SATA_MPLL_CLK_EN);
+
+		usleep_range(100, 200);
+
+		ret = imx_sata_phy_reset(hpriv);
+		if (ret) {
+			dev_err(dev, "failed to reset phy: %d\n", ret);
+			goto disable_regulator;
+		}
 	}
 
 	usleep_range(1000, 2000);
@@ -156,8 +320,8 @@ static void ahci_imx_error_handler(struct ata_port *ap)
 	 * without full reset once the pddq mode is enabled making it
 	 * impossible to use as part of libata LPM.
 	 */
-	reg_val = readl(mmio + PORT_PHY_CTL);
-	writel(reg_val | PORT_PHY_CTL_PDDQ_LOC, mmio + PORT_PHY_CTL);
+	reg_val = readl(mmio + IMX_P0PHYCR);
+	writel(reg_val | IMX_P0PHYCR_TEST_PDDQ, mmio + IMX_P0PHYCR);
 	imx_sata_disable(hpriv);
 	imxpriv->no_device = true;
 }
@@ -217,6 +381,7 @@ static int imx_ahci_probe(struct platform_device *pdev)
 	if (!imxpriv)
 		return -ENOMEM;
 
+	imxpriv->ahci_pdev = pdev;
 	imxpriv->no_device = false;
 	imxpriv->first_time = true;
 	imxpriv->type = (enum ahci_imx_type)of_id->data;
@@ -248,7 +413,7 @@ static int imx_ahci_probe(struct platform_device *pdev)
 
 	/*
 	 * Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL,
-	 * and IP vendor specific register HOST_TIMER1MS.
+	 * and IP vendor specific register IMX_TIMER1MS.
 	 * Configure CAP_SSS (support stagered spin up).
 	 * Implement the port0.
 	 * Get the ahb clock rate, and configure the TIMER1MS register.
@@ -265,7 +430,7 @@ static int imx_ahci_probe(struct platform_device *pdev)
 	}
 
 	reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000;
-	writel(reg_val, hpriv->mmio + HOST_TIMER1MS);
+	writel(reg_val, hpriv->mmio + IMX_TIMER1MS);
 
 	ret = ahci_platform_init_host(pdev, hpriv, &ahci_imx_port_info, 0, 0);
 	if (ret)
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 6bd4f66..b986145 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -452,6 +452,13 @@ void ahci_save_initial_config(struct device *dev,
 		cap &= ~HOST_CAP_SNTF;
 	}
 
+	if ((cap2 & HOST_CAP2_SDS) && (hpriv->flags & AHCI_HFLAG_NO_DEVSLP)) {
+		dev_info(dev,
+			 "controller can't do DEVSLP, turning off\n");
+		cap2 &= ~HOST_CAP2_SDS;
+		cap2 &= ~HOST_CAP2_SADM;
+	}
+
 	if (!(cap & HOST_CAP_FBS) && (hpriv->flags & AHCI_HFLAG_YES_FBS)) {
 		dev_info(dev, "controller can do FBS, turning on CAP_FBS\n");
 		cap |= HOST_CAP_FBS;
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c19734d..ea83828 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4224,8 +4224,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "PIONEER DVD-RW  DVR-216D",	NULL,	ATA_HORKAGE_NOSETXFER },
 
 	/* devices that don't properly handle queued TRIM commands */
-	{ "Micron_M500*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM, },
-	{ "Crucial_CT???M500SSD*",	NULL,	ATA_HORKAGE_NO_NCQ_TRIM, },
+	{ "Micron_M500*",		"MU0[1-4]*",	ATA_HORKAGE_NO_NCQ_TRIM, },
+	{ "Crucial_CT???M500SSD*",	"MU0[1-4]*",	ATA_HORKAGE_NO_NCQ_TRIM, },
+	{ "Micron_M550*",		NULL,		ATA_HORKAGE_NO_NCQ_TRIM, },
+	{ "Crucial_CT???M550SSD*",	NULL,		ATA_HORKAGE_NO_NCQ_TRIM, },
 
 	/*
 	 * Some WD SATA-I drives spin up and down erratically when the link
@@ -4792,21 +4794,26 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
 static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
 {
 	struct ata_queued_cmd *qc = NULL;
-	unsigned int i;
+	unsigned int i, tag;
 
 	/* no command while frozen */
 	if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
 		return NULL;
 
-	/* the last tag is reserved for internal command. */
-	for (i = 0; i < ATA_MAX_QUEUE - 1; i++)
-		if (!test_and_set_bit(i, &ap->qc_allocated)) {
-			qc = __ata_qc_from_tag(ap, i);
+	for (i = 0; i < ATA_MAX_QUEUE; i++) {
+		tag = (i + ap->last_tag + 1) % ATA_MAX_QUEUE;
+
+		/* the last tag is reserved for internal command. */
+		if (tag == ATA_TAG_INTERNAL)
+			continue;
+
+		if (!test_and_set_bit(tag, &ap->qc_allocated)) {
+			qc = __ata_qc_from_tag(ap, tag);
+			qc->tag = tag;
+			ap->last_tag = tag;
 			break;
 		}
-
-	if (qc)
-		qc->tag = i;
+	}
 
 	return qc;
 }
@@ -6307,6 +6314,8 @@ int ata_host_activate(struct ata_host *host, int irq,
 static void ata_port_detach(struct ata_port *ap)
 {
 	unsigned long flags;
+	struct ata_link *link;
+	struct ata_device *dev;
 
 	if (!ap->ops->error_handler)
 		goto skip_eh;
@@ -6326,6 +6335,13 @@ static void ata_port_detach(struct ata_port *ap)
 	cancel_delayed_work_sync(&ap->hotplug_task);
 
  skip_eh:
+	/* clean up zpodd on port removal */
+	ata_for_each_link(link, ap, HOST_FIRST) {
+		ata_for_each_dev(dev, link, ALL) {
+			if (zpodd_dev_enabled(dev))
+				zpodd_exit(dev);
+		}
+	}
 	if (ap->pmp_link) {
 		int i;
 		for (i = 0; i < SATA_PMP_MAX_PORTS; i++)
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index 6fac524..4edb1a8 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -898,9 +898,12 @@ static int arasan_cf_probe(struct platform_device *pdev)
 
 	cf_card_detect(acdev, 0);
 
-	return ata_host_activate(host, acdev->irq, irq_handler, 0,
-			&arasan_cf_sht);
+	ret = ata_host_activate(host, acdev->irq, irq_handler, 0,
+				&arasan_cf_sht);
+	if (!ret)
+		return 0;
 
+	cf_exit(acdev);
 free_clk:
 	clk_put(acdev->clk);
 	return ret;
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index e9c8727..8a66f23 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -407,12 +407,13 @@ static int pata_at91_probe(struct platform_device *pdev)
 
 	host->private_data = info;
 
-	return ata_host_activate(host, gpio_is_valid(irq) ? gpio_to_irq(irq) : 0,
-			gpio_is_valid(irq) ? ata_sff_interrupt : NULL,
-			irq_flags, &pata_at91_sht);
+	ret = ata_host_activate(host, gpio_is_valid(irq) ? gpio_to_irq(irq) : 0,
+				gpio_is_valid(irq) ? ata_sff_interrupt : NULL,
+				irq_flags, &pata_at91_sht);
+	if (ret)
+		goto err_put;
 
-	if (!ret)
-		return 0;
+	return 0;
 
 err_put:
 	clk_put(info->mck);
diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c
index a79566d..0610e78 100644
--- a/drivers/ata/pata_samsung_cf.c
+++ b/drivers/ata/pata_samsung_cf.c
@@ -594,9 +594,13 @@ static int __init pata_s3c_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, host);
 
-	return ata_host_activate(host, info->irq,
-			info->irq ? pata_s3c_irq : NULL,
-			0, &pata_s3c_sht);
+	ret = ata_host_activate(host, info->irq,
+				info->irq ? pata_s3c_irq : NULL,
+				0, &pata_s3c_sht);
+	if (ret)
+		goto stop_clk;
+
+	return 0;
 
 stop_clk:
 	clk_disable(info->clk);