summaryrefslogtreecommitdiff
path: root/drivers/ata
diff options
context:
space:
mode:
authorTejun Heo <tj@kernel.org>2008-11-13 01:04:46 (GMT)
committerJeff Garzik <jgarzik@redhat.com>2008-11-14 23:51:57 (GMT)
commit6a6b97d360702b98c02c7fca4c4e088dcf3a2985 (patch)
tree6b0d6a504c11bbea7096706065c31bd12e7d7e78 /drivers/ata
parent58e20d8d344b0ee083febb18c2b021d2427e56ca (diff)
downloadlinux-6a6b97d360702b98c02c7fca4c4e088dcf3a2985.tar.xz
libata: improve phantom device detection
Currently libata uses four methods to detect device presence. 1. PHY status if available. 2. TF register R/W test (only promotes presence, never demotes) 3. device signature after reset 4. IDENTIFY failure detection in SFF state machine Combination of the above works well in most cases but recently there have been a few reports where a phantom device causes unnecessary delay during probe. In both cases, PHY status wasn't available. In one case, it passed #2 and #3 and failed IDENTIFY with ATA_ERR which didn't qualify as #4. The other failed #2 but as it passed #3 and #4, it still caused failure. In both cases, phantom device reported diagnostic failure, so these cases can be safely worked around by considering any !ATA_DRQ IDENTIFY failure as NODEV_HINT if diagnostic failure is set. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/libata-sff.c13
1 files changed, 11 insertions, 2 deletions
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 4b47394..9033d16 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1227,10 +1227,19 @@ fsm_start:
/* ATA PIO protocol */
if (unlikely((status & ATA_DRQ) == 0)) {
/* handle BSY=0, DRQ=0 as error */
- if (likely(status & (ATA_ERR | ATA_DF)))
+ if (likely(status & (ATA_ERR | ATA_DF))) {
/* device stops HSM for abort/error */
qc->err_mask |= AC_ERR_DEV;
- else {
+
+ /* If diagnostic failed and this is
+ * IDENTIFY, it's likely a phantom
+ * device. Mark hint.
+ */
+ if (qc->dev->horkage &
+ ATA_HORKAGE_DIAGNOSTIC)
+ qc->err_mask |=
+ AC_ERR_NODEV_HINT;
+ } else {
/* HSM violation. Let EH handle this.
* Phantom devices also trigger this
* condition. Mark hint.