diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/block/paride/pd.c | |
download | linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/block/paride/pd.c')
-rw-r--r-- | drivers/block/paride/pd.c | 950 |
1 files changed, 950 insertions, 0 deletions
diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c new file mode 100644 index 0000000..202a5a7 --- /dev/null +++ b/drivers/block/paride/pd.c @@ -0,0 +1,950 @@ +/* + pd.c (c) 1997-8 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU General Public License. + + This is the high-level driver for parallel port IDE hard + drives based on chips supported by the paride module. + + By default, the driver will autoprobe for a single parallel + port IDE drive, but if their individual parameters are + specified, the driver can handle up to 4 drives. + + The behaviour of the pd driver can be altered by setting + some parameters from the insmod command line. The following + parameters are adjustable: + + drive0 These four arguments can be arrays of + drive1 1-8 integers as follows: + drive2 + drive3 <prt>,<pro>,<uni>,<mod>,<geo>,<sby>,<dly>,<slv> + + Where, + + <prt> is the base of the parallel port address for + the corresponding drive. (required) + + <pro> is the protocol number for the adapter that + supports this drive. These numbers are + logged by 'paride' when the protocol modules + are initialised. (0 if not given) + + <uni> for those adapters that support chained + devices, this is the unit selector for the + chain of devices on the given port. It should + be zero for devices that don't support chaining. + (0 if not given) + + <mod> this can be -1 to choose the best mode, or one + of the mode numbers supported by the adapter. + (-1 if not given) + + <geo> this defaults to 0 to indicate that the driver + should use the CHS geometry provided by the drive + itself. If set to 1, the driver will provide + a logical geometry with 64 heads and 32 sectors + per track, to be consistent with most SCSI + drivers. (0 if not given) + + <sby> set this to zero to disable the power saving + standby mode, if needed. (1 if not given) + + <dly> some parallel ports require the driver to + go more slowly. -1 sets a default value that + should work with the chosen protocol. Otherwise, + set this to a small integer, the larger it is + the slower the port i/o. In some cases, setting + this to zero will speed up the device. (default -1) + + <slv> IDE disks can be jumpered to master or slave. + Set this to 0 to choose the master drive, 1 to + choose the slave, -1 (the default) to choose the + first drive found. + + + major You may use this parameter to overide the + default major number (45) that this driver + will use. Be sure to change the device + name as well. + + name This parameter is a character string that + contains the name the kernel will use for this + device (in /proc output, for instance). + (default "pd") + + cluster The driver will attempt to aggregate requests + for adjacent blocks into larger multi-block + clusters. The maximum cluster size (in 512 + byte sectors) is set with this parameter. + (default 64) + + verbose This parameter controls the amount of logging + that the driver will do. Set it to 0 for + normal operation, 1 to see autoprobe progress + messages, or 2 to see additional debugging + output. (default 0) + + nice This parameter controls the driver's use of + idle CPU time, at the expense of some speed. + + If this driver is built into the kernel, you can use kernel + the following command line parameters, with the same values + as the corresponding module parameters listed above: + + pd.drive0 + pd.drive1 + pd.drive2 + pd.drive3 + pd.cluster + pd.nice + + In addition, you can use the parameter pd.disable to disable + the driver entirely. + +*/ + +/* Changes: + + 1.01 GRG 1997.01.24 Restored pd_reset() + Added eject ioctl + 1.02 GRG 1998.05.06 SMP spinlock changes, + Added slave support + 1.03 GRG 1998.06.16 Eliminate an Ugh. + 1.04 GRG 1998.08.15 Extra debugging, use HZ in loop timing + 1.05 GRG 1998.09.24 Added jumbo support + +*/ + +#define PD_VERSION "1.05" +#define PD_MAJOR 45 +#define PD_NAME "pd" +#define PD_UNITS 4 + +/* Here are things one can override from the insmod command. + Most are autoprobed by paride unless set here. Verbose is off + by default. + +*/ + +static int verbose = 0; +static int major = PD_MAJOR; +static char *name = PD_NAME; +static int cluster = 64; +static int nice = 0; +static int disable = 0; + +static int drive0[8] = { 0, 0, 0, -1, 0, 1, -1, -1 }; +static int drive1[8] = { 0, 0, 0, -1, 0, 1, -1, -1 }; +static int drive2[8] = { 0, 0, 0, -1, 0, 1, -1, -1 }; +static int drive3[8] = { 0, 0, 0, -1, 0, 1, -1, -1 }; + +static int (*drives[4])[8] = {&drive0, &drive1, &drive2, &drive3}; + +enum {D_PRT, D_PRO, D_UNI, D_MOD, D_GEO, D_SBY, D_DLY, D_SLV}; + +/* end of parameters */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/fs.h> +#include <linux/delay.h> +#include <linux/hdreg.h> +#include <linux/cdrom.h> /* for the eject ioctl */ +#include <linux/blkdev.h> +#include <linux/blkpg.h> +#include <asm/uaccess.h> +#include <linux/sched.h> +#include <linux/workqueue.h> + +static DEFINE_SPINLOCK(pd_lock); + +module_param(verbose, bool, 0); +module_param(major, int, 0); +module_param(name, charp, 0); +module_param(cluster, int, 0); +module_param(nice, int, 0); +module_param_array(drive0, int, NULL, 0); +module_param_array(drive1, int, NULL, 0); +module_param_array(drive2, int, NULL, 0); +module_param_array(drive3, int, NULL, 0); + +#include "paride.h" + +#define PD_BITS 4 + +/* numbers for "SCSI" geometry */ + +#define PD_LOG_HEADS 64 +#define PD_LOG_SECTS 32 + +#define PD_ID_OFF 54 +#define PD_ID_LEN 14 + +#define PD_MAX_RETRIES 5 +#define PD_TMO 800 /* interrupt timeout in jiffies */ +#define PD_SPIN_DEL 50 /* spin delay in micro-seconds */ + +#define PD_SPIN (1000000*PD_TMO)/(HZ*PD_SPIN_DEL) + +#define STAT_ERR 0x00001 +#define STAT_INDEX 0x00002 +#define STAT_ECC 0x00004 +#define STAT_DRQ 0x00008 +#define STAT_SEEK 0x00010 +#define STAT_WRERR 0x00020 +#define STAT_READY 0x00040 +#define STAT_BUSY 0x00080 + +#define ERR_AMNF 0x00100 +#define ERR_TK0NF 0x00200 +#define ERR_ABRT 0x00400 +#define ERR_MCR 0x00800 +#define ERR_IDNF 0x01000 +#define ERR_MC 0x02000 +#define ERR_UNC 0x04000 +#define ERR_TMO 0x10000 + +#define IDE_READ 0x20 +#define IDE_WRITE 0x30 +#define IDE_READ_VRFY 0x40 +#define IDE_INIT_DEV_PARMS 0x91 +#define IDE_STANDBY 0x96 +#define IDE_ACKCHANGE 0xdb +#define IDE_DOORLOCK 0xde +#define IDE_DOORUNLOCK 0xdf +#define IDE_IDENTIFY 0xec +#define IDE_EJECT 0xed + +#define PD_NAMELEN 8 + +struct pd_unit { + struct pi_adapter pia; /* interface to paride layer */ + struct pi_adapter *pi; + int access; /* count of active opens ... */ + int capacity; /* Size of this volume in sectors */ + int heads; /* physical geometry */ + int sectors; + int cylinders; + int can_lba; + int drive; /* master=0 slave=1 */ + int changed; /* Have we seen a disk change ? */ + int removable; /* removable media device ? */ + int standby; + int alt_geom; + char name[PD_NAMELEN]; /* pda, pdb, etc ... */ + struct gendisk *gd; +}; + +static struct pd_unit pd[PD_UNITS]; + +static char pd_scratch[512]; /* scratch block buffer */ + +static char *pd_errs[17] = { "ERR", "INDEX", "ECC", "DRQ", "SEEK", "WRERR", + "READY", "BUSY", "AMNF", "TK0NF", "ABRT", "MCR", + "IDNF", "MC", "UNC", "???", "TMO" +}; + +static inline int status_reg(struct pd_unit *disk) +{ + return pi_read_regr(disk->pi, 1, 6); +} + +static inline int read_reg(struct pd_unit *disk, int reg) +{ + return pi_read_regr(disk->pi, 0, reg); +} + +static inline void write_status(struct pd_unit *disk, int val) +{ + pi_write_regr(disk->pi, 1, 6, val); +} + +static inline void write_reg(struct pd_unit *disk, int reg, int val) +{ + pi_write_regr(disk->pi, 0, reg, val); +} + +static inline u8 DRIVE(struct pd_unit *disk) +{ + return 0xa0+0x10*disk->drive; +} + +/* ide command interface */ + +static void pd_print_error(struct pd_unit *disk, char *msg, int status) +{ + int i; + + printk("%s: %s: status = 0x%x =", disk->name, msg, status); + for (i = 0; i < 18; i++) + if (status & (1 << i)) + printk(" %s", pd_errs[i]); + printk("\n"); +} + +static void pd_reset(struct pd_unit *disk) +{ /* called only for MASTER drive */ + write_status(disk, 4); + udelay(50); + write_status(disk, 0); + udelay(250); +} + +#define DBMSG(msg) ((verbose>1)?(msg):NULL) + +static int pd_wait_for(struct pd_unit *disk, int w, char *msg) +{ /* polled wait */ + int k, r, e; + + k = 0; + while (k < PD_SPIN) { + r = status_reg(disk); + k++; + if (((r & w) == w) && !(r & STAT_BUSY)) + break; + udelay(PD_SPIN_DEL); + } + e = (read_reg(disk, 1) << 8) + read_reg(disk, 7); + if (k >= PD_SPIN) + e |= ERR_TMO; + if ((e & (STAT_ERR | ERR_TMO)) && (msg != NULL)) + pd_print_error(disk, msg, e); + return e; +} + +static void pd_send_command(struct pd_unit *disk, int n, int s, int h, int c0, int c1, int func) +{ + write_reg(disk, 6, DRIVE(disk) + h); + write_reg(disk, 1, 0); /* the IDE task file */ + write_reg(disk, 2, n); + write_reg(disk, 3, s); + write_reg(disk, 4, c0); + write_reg(disk, 5, c1); + write_reg(disk, 7, func); + + udelay(1); +} + +static void pd_ide_command(struct pd_unit *disk, int func, int block, int count) +{ + int c1, c0, h, s; + + if (disk->can_lba) { + s = block & 255; + c0 = (block >>= 8) & 255; + c1 = (block >>= 8) & 255; + h = ((block >>= 8) & 15) + 0x40; + } else { + s = (block % disk->sectors) + 1; + h = (block /= disk->sectors) % disk->heads; + c0 = (block /= disk->heads) % 256; + c1 = (block >>= 8); + } + pd_send_command(disk, count, s, h, c0, c1, func); +} + +/* The i/o request engine */ + +enum action {Fail = 0, Ok = 1, Hold, Wait}; + +static struct request *pd_req; /* current request */ +static enum action (*phase)(void); + +static void run_fsm(void); + +static void ps_tq_int( void *data); + +static DECLARE_WORK(fsm_tq, ps_tq_int, NULL); + +static void schedule_fsm(void) +{ + if (!nice) + schedule_work(&fsm_tq); + else + schedule_delayed_work(&fsm_tq, nice-1); +} + +static void ps_tq_int(void *data) +{ + run_fsm(); +} + +static enum action do_pd_io_start(void); +static enum action pd_special(void); +static enum action do_pd_read_start(void); +static enum action do_pd_write_start(void); +static enum action do_pd_read_drq(void); +static enum action do_pd_write_done(void); + +static struct request_queue *pd_queue; +static int pd_claimed; + +static struct pd_unit *pd_current; /* current request's drive */ +static PIA *pi_current; /* current request's PIA */ + +static void run_fsm(void) +{ + while (1) { + enum action res; + unsigned long saved_flags; + int stop = 0; + + if (!phase) { + pd_current = pd_req->rq_disk->private_data; + pi_current = pd_current->pi; + phase = do_pd_io_start; + } + + switch (pd_claimed) { + case 0: + pd_claimed = 1; + if (!pi_schedule_claimed(pi_current, run_fsm)) + return; + case 1: + pd_claimed = 2; + pi_current->proto->connect(pi_current); + } + + switch(res = phase()) { + case Ok: case Fail: + pi_disconnect(pi_current); + pd_claimed = 0; + phase = NULL; + spin_lock_irqsave(&pd_lock, saved_flags); + end_request(pd_req, res); + pd_req = elv_next_request(pd_queue); + if (!pd_req) + stop = 1; + spin_unlock_irqrestore(&pd_lock, saved_flags); + if (stop) + return; + case Hold: + schedule_fsm(); + return; + case Wait: + pi_disconnect(pi_current); + pd_claimed = 0; + } + } +} + +static int pd_retries = 0; /* i/o error retry count */ +static int pd_block; /* address of next requested block */ +static int pd_count; /* number of blocks still to do */ +static int pd_run; /* sectors in current cluster */ +static int pd_cmd; /* current command READ/WRITE */ +static char *pd_buf; /* buffer for request in progress */ + +static enum action do_pd_io_start(void) +{ + if (pd_req->flags & REQ_SPECIAL) { + phase = pd_special; + return pd_special(); + } + + pd_cmd = rq_data_dir(pd_req); + if (pd_cmd == READ || pd_cmd == WRITE) { + pd_block = pd_req->sector; + pd_count = pd_req->current_nr_sectors; + if (pd_block + pd_count > get_capacity(pd_req->rq_disk)) + return Fail; + pd_run = pd_req->nr_sectors; + pd_buf = pd_req->buffer; + pd_retries = 0; + if (pd_cmd == READ) + return do_pd_read_start(); + else + return do_pd_write_start(); + } + return Fail; +} + +static enum action pd_special(void) +{ + enum action (*func)(struct pd_unit *) = pd_req->special; + return func(pd_current); +} + +static int pd_next_buf(void) +{ + unsigned long saved_flags; + + pd_count--; + pd_run--; + pd_buf += 512; + pd_block++; + if (!pd_run) + return 1; + if (pd_count) + return 0; + spin_lock_irqsave(&pd_lock, saved_flags); + end_request(pd_req, 1); + pd_count = pd_req->current_nr_sectors; + pd_buf = pd_req->buffer; + spin_unlock_irqrestore(&pd_lock, saved_flags); + return 0; +} + +static unsigned long pd_timeout; + +static enum action do_pd_read_start(void) +{ + if (pd_wait_for(pd_current, STAT_READY, "do_pd_read") & STAT_ERR) { + if (pd_retries < PD_MAX_RETRIES) { + pd_retries++; + return Wait; + } + return Fail; + } + pd_ide_command(pd_current, IDE_READ, pd_block, pd_run); + phase = do_pd_read_drq; + pd_timeout = jiffies + PD_TMO; + return Hold; +} + +static enum action do_pd_write_start(void) +{ + if (pd_wait_for(pd_current, STAT_READY, "do_pd_write") & STAT_ERR) { + if (pd_retries < PD_MAX_RETRIES) { + pd_retries++; + return Wait; + } + return Fail; + } + pd_ide_command(pd_current, IDE_WRITE, pd_block, pd_run); + while (1) { + if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_write_drq") & STAT_ERR) { + if (pd_retries < PD_MAX_RETRIES) { + pd_retries++; + return Wait; + } + return Fail; + } + pi_write_block(pd_current->pi, pd_buf, 512); + if (pd_next_buf()) + break; + } + phase = do_pd_write_done; + pd_timeout = jiffies + PD_TMO; + return Hold; +} + +static inline int pd_ready(void) +{ + return !(status_reg(pd_current) & STAT_BUSY); +} + +static enum action do_pd_read_drq(void) +{ + if (!pd_ready() && !time_after_eq(jiffies, pd_timeout)) + return Hold; + + while (1) { + if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_read_drq") & STAT_ERR) { + if (pd_retries < PD_MAX_RETRIES) { + pd_retries++; + phase = do_pd_read_start; + return Wait; + } + return Fail; + } + pi_read_block(pd_current->pi, pd_buf, 512); + if (pd_next_buf()) + break; + } + return Ok; +} + +static enum action do_pd_write_done(void) +{ + if (!pd_ready() && !time_after_eq(jiffies, pd_timeout)) + return Hold; + + if (pd_wait_for(pd_current, STAT_READY, "do_pd_write_done") & STAT_ERR) { + if (pd_retries < PD_MAX_RETRIES) { + pd_retries++; + phase = do_pd_write_start; + return Wait; + } + return Fail; + } + return Ok; +} + +/* special io requests */ + +/* According to the ATA standard, the default CHS geometry should be + available following a reset. Some Western Digital drives come up + in a mode where only LBA addresses are accepted until the device + parameters are initialised. +*/ + +static void pd_init_dev_parms(struct pd_unit *disk) +{ + pd_wait_for(disk, 0, DBMSG("before init_dev_parms")); + pd_send_command(disk, disk->sectors, 0, disk->heads - 1, 0, 0, + IDE_INIT_DEV_PARMS); + udelay(300); + pd_wait_for(disk, 0, "Initialise device parameters"); +} + +static enum action pd_door_lock(struct pd_unit *disk) +{ + if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) { + pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORLOCK); + pd_wait_for(disk, STAT_READY, "Lock done"); + } + return Ok; +} + +static enum action pd_door_unlock(struct pd_unit *disk) +{ + if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) { + pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK); + pd_wait_for(disk, STAT_READY, "Lock done"); + } + return Ok; +} + +static enum action pd_eject(struct pd_unit *disk) +{ + pd_wait_for(disk, 0, DBMSG("before unlock on eject")); + pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK); + pd_wait_for(disk, 0, DBMSG("after unlock on eject")); + pd_wait_for(disk, 0, DBMSG("before eject")); + pd_send_command(disk, 0, 0, 0, 0, 0, IDE_EJECT); + pd_wait_for(disk, 0, DBMSG("after eject")); + return Ok; +} + +static enum action pd_media_check(struct pd_unit *disk) +{ + int r = pd_wait_for(disk, STAT_READY, DBMSG("before media_check")); + if (!(r & STAT_ERR)) { + pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY); + r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after READ_VRFY")); + } else + disk->changed = 1; /* say changed if other error */ + if (r & ERR_MC) { + disk->changed = 1; + pd_send_command(disk, 1, 0, 0, 0, 0, IDE_ACKCHANGE); + pd_wait_for(disk, STAT_READY, DBMSG("RDY after ACKCHANGE")); + pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY); + r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after VRFY")); + } + return Ok; +} + +static void pd_standby_off(struct pd_unit *disk) +{ + pd_wait_for(disk, 0, DBMSG("before STANDBY")); + pd_send_command(disk, 0, 0, 0, 0, 0, IDE_STANDBY); + pd_wait_for(disk, 0, DBMSG("after STANDBY")); +} + +static enum action pd_identify(struct pd_unit *disk) +{ + int j; + char id[PD_ID_LEN + 1]; + +/* WARNING: here there may be dragons. reset() applies to both drives, + but we call it only on probing the MASTER. This should allow most + common configurations to work, but be warned that a reset can clear + settings on the SLAVE drive. +*/ + + if (disk->drive == 0) + pd_reset(disk); + + write_reg(disk, 6, DRIVE(disk)); + pd_wait_for(disk, 0, DBMSG("before IDENT")); + pd_send_command(disk, 1, 0, 0, 0, 0, IDE_IDENTIFY); + + if (pd_wait_for(disk, STAT_DRQ, DBMSG("IDENT DRQ")) & STAT_ERR) + return Fail; + pi_read_block(disk->pi, pd_scratch, 512); + disk->can_lba = pd_scratch[99] & 2; + disk->sectors = le16_to_cpu(*(u16 *) (pd_scratch + 12)); + disk->heads = le16_to_cpu(*(u16 *) (pd_scratch + 6)); + disk->cylinders = le16_to_cpu(*(u16 *) (pd_scratch + 2)); + if (disk->can_lba) + disk->capacity = le32_to_cpu(*(u32 *) (pd_scratch + 120)); + else + disk->capacity = disk->sectors * disk->heads * disk->cylinders; + + for (j = 0; j < PD_ID_LEN; j++) + id[j ^ 1] = pd_scratch[j + PD_ID_OFF]; + j = PD_ID_LEN - 1; + while ((j >= 0) && (id[j] <= 0x20)) + j--; + j++; + id[j] = 0; + + disk->removable = pd_scratch[0] & 0x80; + + printk("%s: %s, %s, %d blocks [%dM], (%d/%d/%d), %s media\n", + disk->name, id, + disk->drive ? "slave" : "master", + disk->capacity, disk->capacity / 2048, + disk->cylinders, disk->heads, disk->sectors, + disk->removable ? "removable" : "fixed"); + + if (disk->capacity) + pd_init_dev_parms(disk); + if (!disk->standby) + pd_standby_off(disk); + + return Ok; +} + +/* end of io request engine */ + +static void do_pd_request(request_queue_t * q) +{ + if (pd_req) + return; + pd_req = elv_next_request(q); + if (!pd_req) + return; + + schedule_fsm(); +} + +static int pd_special_command(struct pd_unit *disk, + enum action (*func)(struct pd_unit *disk)) +{ + DECLARE_COMPLETION(wait); + struct request rq; + int err = 0; + + memset(&rq, 0, sizeof(rq)); + rq.errors = 0; + rq.rq_status = RQ_ACTIVE; + rq.rq_disk = disk->gd; + rq.ref_count = 1; + rq.waiting = &wait; + rq.end_io = blk_end_sync_rq; + blk_insert_request(disk->gd->queue, &rq, 0, func, 0); + wait_for_completion(&wait); + rq.waiting = NULL; + if (rq.errors) + err = -EIO; + blk_put_request(&rq); + return err; +} + +/* kernel glue structures */ + +static int pd_open(struct inode *inode, struct file *file) +{ + struct pd_unit *disk = inode->i_bdev->bd_disk->private_data; + + disk->access++; + + if (disk->removable) { + pd_special_command(disk, pd_media_check); + pd_special_command(disk, pd_door_lock); + } + return 0; +} + +static int pd_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct pd_unit *disk = inode->i_bdev->bd_disk->private_data; + struct hd_geometry __user *geo = (struct hd_geometry __user *) arg; + struct hd_geometry g; + + switch (cmd) { + case CDROMEJECT: + if (disk->access == 1) + pd_special_command(disk, pd_eject); + return 0; + case HDIO_GETGEO: + if (disk->alt_geom) { + g.heads = PD_LOG_HEADS; + g.sectors = PD_LOG_SECTS; + g.cylinders = disk->capacity / (g.heads * g.sectors); + } else { + g.heads = disk->heads; + g.sectors = disk->sectors; + g.cylinders = disk->cylinders; + } + g.start = get_start_sect(inode->i_bdev); + if (copy_to_user(geo, &g, sizeof(struct hd_geometry))) + return -EFAULT; + return 0; + default: + return -EINVAL; + } +} + +static int pd_release(struct inode *inode, struct file *file) +{ + struct pd_unit *disk = inode->i_bdev->bd_disk->private_data; + + if (!--disk->access && disk->removable) + pd_special_command(disk, pd_door_unlock); + + return 0; +} + +static int pd_check_media(struct gendisk *p) +{ + struct pd_unit *disk = p->private_data; + int r; + if (!disk->removable) + return 0; + pd_special_command(disk, pd_media_check); + r = disk->changed; + disk->changed = 0; + return r; +} + +static int pd_revalidate(struct gendisk *p) +{ + struct pd_unit *disk = p->private_data; + if (pd_special_command(disk, pd_identify) == 0) + set_capacity(p, disk->capacity); + else + set_capacity(p, 0); + return 0; +} + +static struct block_device_operations pd_fops = { + .owner = THIS_MODULE, + .open = pd_open, + .release = pd_release, + .ioctl = pd_ioctl, + .media_changed = pd_check_media, + .revalidate_disk= pd_revalidate +}; + +/* probing */ + +static void pd_probe_drive(struct pd_unit *disk) +{ + struct gendisk *p = alloc_disk(1 << PD_BITS); + if (!p) + return; + strcpy(p->disk_name, disk->name); + p->fops = &pd_fops; + p->major = major; + p->first_minor = (disk - pd) << PD_BITS; + disk->gd = p; + p->private_data = disk; + p->queue = pd_queue; + + if (disk->drive == -1) { + for (disk->drive = 0; disk->drive <= 1; disk->drive++) + if (pd_special_command(disk, pd_identify) == 0) + return; + } else if (pd_special_command(disk, pd_identify) == 0) + return; + disk->gd = NULL; + put_disk(p); +} + +static int pd_detect(void) +{ + int found = 0, unit, pd_drive_count = 0; + struct pd_unit *disk; + + for (unit = 0; unit < PD_UNITS; unit++) { + int *parm = *drives[unit]; + struct pd_unit *disk = pd + unit; + disk->pi = &disk->pia; + disk->access = 0; + disk->changed = 1; + disk->capacity = 0; + disk->drive = parm[D_SLV]; + snprintf(disk->name, PD_NAMELEN, "%s%c", name, 'a'+unit); + disk->alt_geom = parm[D_GEO]; + disk->standby = parm[D_SBY]; + if (parm[D_PRT]) + pd_drive_count++; + } + + if (pd_drive_count == 0) { /* nothing spec'd - so autoprobe for 1 */ + disk = pd; + if (pi_init(disk->pi, 1, -1, -1, -1, -1, -1, pd_scratch, + PI_PD, verbose, disk->name)) { + pd_probe_drive(disk); + if (!disk->gd) + pi_release(disk->pi); + } + + } else { + for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) { + int *parm = *drives[unit]; + if (!parm[D_PRT]) + continue; + if (pi_init(disk->pi, 0, parm[D_PRT], parm[D_MOD], + parm[D_UNI], parm[D_PRO], parm[D_DLY], + pd_scratch, PI_PD, verbose, disk->name)) { + pd_probe_drive(disk); + if (!disk->gd) + pi_release(disk->pi); + } + } + } + for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) { + if (disk->gd) { + set_capacity(disk->gd, disk->capacity); + add_disk(disk->gd); + found = 1; + } + } + if (!found) + printk("%s: no valid drive found\n", name); + return found; +} + +static int __init pd_init(void) +{ + if (disable) + goto out1; + + pd_queue = blk_init_queue(do_pd_request, &pd_lock); + if (!pd_queue) + goto out1; + + blk_queue_max_sectors(pd_queue, cluster); + + if (register_blkdev(major, name)) + goto out2; + + printk("%s: %s version %s, major %d, cluster %d, nice %d\n", + name, name, PD_VERSION, major, cluster, nice); + if (!pd_detect()) + goto out3; + + return 0; + +out3: + unregister_blkdev(major, name); +out2: + blk_cleanup_queue(pd_queue); +out1: + return -ENODEV; +} + +static void __exit pd_exit(void) +{ + struct pd_unit *disk; + int unit; + unregister_blkdev(major, name); + for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) { + struct gendisk *p = disk->gd; + if (p) { + disk->gd = NULL; + del_gendisk(p); + put_disk(p); + pi_release(disk->pi); + } + } + blk_cleanup_queue(pd_queue); +} + +MODULE_LICENSE("GPL"); +module_init(pd_init) +module_exit(pd_exit) |