summaryrefslogtreecommitdiff
path: root/drivers/bluetooth
diff options
context:
space:
mode:
authorFrederic Danis <frederic.danis@linux.intel.com>2015-06-09 14:15:37 (GMT)
committerMarcel Holtmann <marcel@holtmann.org>2015-06-09 21:27:35 (GMT)
commit61b2fc2bb53f162121f4267f10d2a662911f3e86 (patch)
tree4cfde9a55db67caa61ed59dd376341b664bea68d /drivers/bluetooth
parentc9d442038ef729549e1fd14ff1d61d0d3a7f0560 (diff)
downloadlinux-61b2fc2bb53f162121f4267f10d2a662911f3e86.tar.xz
Bluetooth: hci_uart: Add bcm_set_baudrate()
Add vendor specific command to change controller device speed. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Diffstat (limited to 'drivers/bluetooth')
-rw-r--r--drivers/bluetooth/btbcm.h12
-rw-r--r--drivers/bluetooth/hci_bcm.c58
2 files changed, 70 insertions, 0 deletions
diff --git a/drivers/bluetooth/btbcm.h b/drivers/bluetooth/btbcm.h
index f405f84..02f5f96 100644
--- a/drivers/bluetooth/btbcm.h
+++ b/drivers/bluetooth/btbcm.h
@@ -21,6 +21,18 @@
*
*/
+#define BCM_UART_CLOCK_48MHZ 0x01
+#define BCM_UART_CLOCK_24MHZ 0x02
+
+struct bcm_update_uart_baud_rate {
+ __le16 zero;
+ __le32 baud_rate;
+} __packed;
+
+struct bcm_write_uart_clock_setting {
+ __u8 type;
+} __packed;
+
#if IS_ENABLED(CONFIG_BT_BCM)
int btbcm_check_bdaddr(struct hci_dev *hdev);
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 0704522..e4d66b6 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -37,6 +37,55 @@ struct bcm_data {
struct sk_buff_head txq;
};
+static int bcm_set_baudrate(struct hci_uart *hu, unsigned int speed)
+{
+ struct hci_dev *hdev = hu->hdev;
+ struct sk_buff *skb;
+ struct bcm_update_uart_baud_rate param;
+
+ if (speed > 3000000) {
+ struct bcm_write_uart_clock_setting clock;
+
+ clock.type = BCM_UART_CLOCK_48MHZ;
+
+ BT_DBG("%s: Set Controller clock (%d)", hdev->name, clock.type);
+
+ /* This Broadcom specific command changes the UART's controller
+ * clock for baud rate > 3000000.
+ */
+ skb = __hci_cmd_sync(hdev, 0xfc45, 1, &clock, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ int err = PTR_ERR(skb);
+ BT_ERR("%s: BCM: failed to write clock command (%d)",
+ hdev->name, err);
+ return err;
+ }
+
+ kfree_skb(skb);
+ }
+
+ BT_DBG("%s: Set Controller UART speed to %d bit/s", hdev->name, speed);
+
+ param.zero = cpu_to_le16(0);
+ param.baud_rate = cpu_to_le32(speed);
+
+ /* This Broadcom specific command changes the UART's controller baud
+ * rate.
+ */
+ skb = __hci_cmd_sync(hdev, 0xfc18, sizeof(param), &param,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ int err = PTR_ERR(skb);
+ BT_ERR("%s: BCM: failed to write update baudrate command (%d)",
+ hdev->name, err);
+ return err;
+ }
+
+ kfree_skb(skb);
+
+ return 0;
+}
+
static int bcm_open(struct hci_uart *hu)
{
struct bcm_data *bcm;
@@ -107,6 +156,12 @@ static int bcm_setup(struct hci_uart *hu)
if (hu->proto->init_speed)
hci_uart_set_baudrate(hu, hu->proto->init_speed);
+ if (hu->proto->oper_speed) {
+ err = bcm_set_baudrate(hu, hu->proto->oper_speed);
+ if (!err)
+ hci_uart_set_baudrate(hu, hu->proto->oper_speed);
+ }
+
finalize:
release_firmware(fw);
@@ -162,10 +217,13 @@ static struct sk_buff *bcm_dequeue(struct hci_uart *hu)
static const struct hci_uart_proto bcm_proto = {
.id = HCI_UART_BCM,
.name = "BCM",
+ .init_speed = 115200,
+ .oper_speed = 4000000,
.open = bcm_open,
.close = bcm_close,
.flush = bcm_flush,
.setup = bcm_setup,
+ .set_baudrate = bcm_set_baudrate,
.recv = bcm_recv,
.enqueue = bcm_enqueue,
.dequeue = bcm_dequeue,