clk: sirf: re-arch to make the codes support both prima2 and atlas6

sirfprima2 and sirfatlas6 are two different SoCs in CSR SiRF series. for
prima2 and atlas6, there are many shared clocks but there are still
some different register layout and hardware clocks, then result in
different clock table.

here we re-arch the driver to
1. clk-common.c provides common clocks for prima2 and atlas6,
2. clk-prima2.h describles registers of prima2 and clk-prima2.c provides
prima2 specific clocks and clock table.
3. clk-atlas6.h describles registers of atlas6 and clk-atlas6.c provides
atlas6 specific clocks and clock table.
4. clk.h and clk.c expose external interfaces and provide uniform entry
for both prima2 and atlas6.

so both prima2 and atlas6 will get support by drivers/clk/sirf.

Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Rongjun Ying <Rongjun.Ying@csr.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

1 files changed, 151 insertions, 0 deletions

diff --git a/drivers/clk/sirf/clk-prima2.c b/drivers/clk/sirf/clk-prima2.c
new file mode 100644
index 0000000..7adc5c7
--- /dev/null
+++ b/drivers/clk/sirf/clk-prima2.c
@@ -0,0 +1,151 @@
+/*
+ * Clock tree for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#include "prima2.h"
+#include "clk-common.c"
+
+static struct clk_dmn clk_mmc01 = {
+	.regofs = SIRFSOC_CLKC_MMC_CFG,
+	.enable_bit = 59,
+	.hw = {
+		.init = &clk_mmc01_init,
+	},
+};
+
+static struct clk_dmn clk_mmc23 = {
+	.regofs = SIRFSOC_CLKC_MMC_CFG,
+	.enable_bit = 60,
+	.hw = {
+		.init = &clk_mmc23_init,
+	},
+};
+
+static struct clk_dmn clk_mmc45 = {
+	.regofs = SIRFSOC_CLKC_MMC_CFG,
+	.enable_bit = 61,
+	.hw = {
+		.init = &clk_mmc45_init,
+	},
+};
+
+static struct clk_init_data clk_nand_init = {
+	.name = "nand",
+	.ops = &ios_ops,
+	.parent_names = std_clk_io_parents,
+	.num_parents = ARRAY_SIZE(std_clk_io_parents),
+};
+
+static struct clk_std clk_nand = {
+	.enable_bit = 34,
+	.hw = {
+		.init = &clk_nand_init,
+	},
+};
+
+enum prima2_clk_index {
+	/* 0    1     2      3      4      5      6       7         8      9 */
+	rtc,    osc,   pll1,  pll2,  pll3,  mem,   sys,   security, dsp,   gps,
+	mf,     io,    cpu,   uart0, uart1, uart2, tsc,   i2c0,     i2c1,  spi0,
+	spi1,   pwmc,  efuse, pulse, dmac0, dmac1, nand,  audio,    usp0,  usp1,
+	usp2,   vip,   gfx,   mm,    lcd,   vpp,   mmc01, mmc23,    mmc45, usbpll,
+	usb0,  usb1,   cphif, maxclk,
+};
+
+static __initdata struct clk_hw *prima2_clk_hw_array[maxclk] = {
+	NULL, /* dummy */
+	NULL,
+	&clk_pll1.hw,
+	&clk_pll2.hw,
+	&clk_pll3.hw,
+	&clk_mem.hw,
+	&clk_sys.hw,
+	&clk_security.hw,
+	&clk_dsp.hw,
+	&clk_gps.hw,
+	&clk_mf.hw,
+	&clk_io.hw,
+	&clk_cpu.hw,
+	&clk_uart0.hw,
+	&clk_uart1.hw,
+	&clk_uart2.hw,
+	&clk_tsc.hw,
+	&clk_i2c0.hw,
+	&clk_i2c1.hw,
+	&clk_spi0.hw,
+	&clk_spi1.hw,
+	&clk_pwmc.hw,
+	&clk_efuse.hw,
+	&clk_pulse.hw,
+	&clk_dmac0.hw,
+	&clk_dmac1.hw,
+	&clk_nand.hw,
+	&clk_audio.hw,
+	&clk_usp0.hw,
+	&clk_usp1.hw,
+	&clk_usp2.hw,
+	&clk_vip.hw,
+	&clk_gfx.hw,
+	&clk_mm.hw,
+	&clk_lcd.hw,
+	&clk_vpp.hw,
+	&clk_mmc01.hw,
+	&clk_mmc23.hw,
+	&clk_mmc45.hw,
+	&usb_pll_clk_hw,
+	&clk_usb0.hw,
+	&clk_usb1.hw,
+	&clk_cphif.hw,
+};
+
+static struct clk *prima2_clks[maxclk];
+
+static void __init prima2_clk_init(struct device_node *np)
+{
+	struct device_node *rscnp;
+	int i;
+
+	rscnp = of_find_compatible_node(NULL, NULL, "sirf,prima2-rsc");
+	sirfsoc_rsc_vbase = of_iomap(rscnp, 0);
+	if (!sirfsoc_rsc_vbase)
+		panic("unable to map rsc registers\n");
+	of_node_put(rscnp);
+
+	sirfsoc_clk_vbase = of_iomap(np, 0);
+	if (!sirfsoc_clk_vbase)
+		panic("unable to map clkc registers\n");
+
+	/* These are always available (RTC and 26MHz OSC)*/
+	prima2_clks[rtc] = clk_register_fixed_rate(NULL, "rtc", NULL,
+		CLK_IS_ROOT, 32768);
+	prima2_clks[osc] = clk_register_fixed_rate(NULL, "osc", NULL,
+		CLK_IS_ROOT, 26000000);
+
+	for (i = pll1; i < maxclk; i++) {
+		prima2_clks[i] = clk_register(NULL, prima2_clk_hw_array[i]);
+		BUG_ON(!prima2_clks[i]);
+	}
+	clk_register_clkdev(prima2_clks[cpu], NULL, "cpu");
+	clk_register_clkdev(prima2_clks[io],  NULL, "io");
+	clk_register_clkdev(prima2_clks[mem],  NULL, "mem");
+	clk_register_clkdev(prima2_clks[mem],  NULL, "osc");
+
+	clk_data.clks = prima2_clks;
+	clk_data.clk_num = maxclk;
+
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+CLK_OF_DECLARE(prima2_clk, "sirf,prima2-clkc", prima2_clk_init);