diff options
author | Thierry Reding <treding@nvidia.com> | 2015-08-14 10:40:09 (GMT) |
---|---|---|
committer | Thierry Reding <treding@nvidia.com> | 2015-10-20 11:56:54 (GMT) |
commit | 4182b8d454331c5ca85b57c0a7357073d96b170f (patch) | |
tree | c11fe0a90b81c8f8c060ffb2cb73388fdb4ffb76 /drivers/clk/tegra/clk-dfll.c | |
parent | 10d9be6ebe9199feb7680433a24b564a31a8f9b1 (diff) | |
download | linux-4182b8d454331c5ca85b57c0a7357073d96b170f.tar.xz |
clk: tegra: dfll: Monitor code is DEBUG_FS only
The monitor code is used with DEBUG_FS only, so move it into the
corresponding #ifdef block to avoid potential compiler warnings.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Diffstat (limited to 'drivers/clk/tegra/clk-dfll.c')
-rw-r--r-- | drivers/clk/tegra/clk-dfll.c | 99 |
1 files changed, 49 insertions, 50 deletions
diff --git a/drivers/clk/tegra/clk-dfll.c b/drivers/clk/tegra/clk-dfll.c index 6a75a74..c56a5c7 100644 --- a/drivers/clk/tegra/clk-dfll.c +++ b/drivers/clk/tegra/clk-dfll.c @@ -469,56 +469,6 @@ static unsigned long dfll_scale_dvco_rate(int scale_bits, } /* - * Monitor control - */ - -/** - * dfll_calc_monitored_rate - convert DFLL_MONITOR_DATA_VAL rate into real freq - * @monitor_data: value read from the DFLL_MONITOR_DATA_VAL bitfield - * @ref_rate: DFLL reference clock rate - * - * Convert @monitor_data from DFLL_MONITOR_DATA_VAL units into cycles - * per second. Returns the converted value. - */ -static u64 dfll_calc_monitored_rate(u32 monitor_data, - unsigned long ref_rate) -{ - return monitor_data * (ref_rate / REF_CLK_CYC_PER_DVCO_SAMPLE); -} - -/** - * dfll_read_monitor_rate - return the DFLL's output rate from internal monitor - * @td: DFLL instance - * - * If the DFLL is enabled, return the last rate reported by the DFLL's - * internal monitoring hardware. This works in both open-loop and - * closed-loop mode, and takes the output scaler setting into account. - * Assumes that the monitor was programmed to monitor frequency before - * the sample period started. If the driver believes that the DFLL is - * currently uninitialized or disabled, it will return 0, since - * otherwise the DFLL monitor data register will return the last - * measured rate from when the DFLL was active. - */ -static u64 dfll_read_monitor_rate(struct tegra_dfll *td) -{ - u32 v, s; - u64 pre_scaler_rate, post_scaler_rate; - - if (!dfll_is_running(td)) - return 0; - - v = dfll_readl(td, DFLL_MONITOR_DATA); - v = (v & DFLL_MONITOR_DATA_VAL_MASK) >> DFLL_MONITOR_DATA_VAL_SHIFT; - pre_scaler_rate = dfll_calc_monitored_rate(v, td->ref_rate); - - s = dfll_readl(td, DFLL_FREQ_REQ); - s = (s & DFLL_FREQ_REQ_SCALE_MASK) >> DFLL_FREQ_REQ_SCALE_SHIFT; - post_scaler_rate = dfll_scale_dvco_rate(s, pre_scaler_rate); - - return post_scaler_rate; -} - -/* * DFLL mode switching */ @@ -1096,6 +1046,55 @@ static void dfll_unregister_clk(struct tegra_dfll *td) */ #ifdef CONFIG_DEBUG_FS +/* + * Monitor control + */ + +/** + * dfll_calc_monitored_rate - convert DFLL_MONITOR_DATA_VAL rate into real freq + * @monitor_data: value read from the DFLL_MONITOR_DATA_VAL bitfield + * @ref_rate: DFLL reference clock rate + * + * Convert @monitor_data from DFLL_MONITOR_DATA_VAL units into cycles + * per second. Returns the converted value. + */ +static u64 dfll_calc_monitored_rate(u32 monitor_data, + unsigned long ref_rate) +{ + return monitor_data * (ref_rate / REF_CLK_CYC_PER_DVCO_SAMPLE); +} + +/** + * dfll_read_monitor_rate - return the DFLL's output rate from internal monitor + * @td: DFLL instance + * + * If the DFLL is enabled, return the last rate reported by the DFLL's + * internal monitoring hardware. This works in both open-loop and + * closed-loop mode, and takes the output scaler setting into account. + * Assumes that the monitor was programmed to monitor frequency before + * the sample period started. If the driver believes that the DFLL is + * currently uninitialized or disabled, it will return 0, since + * otherwise the DFLL monitor data register will return the last + * measured rate from when the DFLL was active. + */ +static u64 dfll_read_monitor_rate(struct tegra_dfll *td) +{ + u32 v, s; + u64 pre_scaler_rate, post_scaler_rate; + + if (!dfll_is_running(td)) + return 0; + + v = dfll_readl(td, DFLL_MONITOR_DATA); + v = (v & DFLL_MONITOR_DATA_VAL_MASK) >> DFLL_MONITOR_DATA_VAL_SHIFT; + pre_scaler_rate = dfll_calc_monitored_rate(v, td->ref_rate); + + s = dfll_readl(td, DFLL_FREQ_REQ); + s = (s & DFLL_FREQ_REQ_SCALE_MASK) >> DFLL_FREQ_REQ_SCALE_SHIFT; + post_scaler_rate = dfll_scale_dvco_rate(s, pre_scaler_rate); + + return post_scaler_rate; +} static int attr_enable_get(void *data, u64 *val) { |