summaryrefslogtreecommitdiff
path: root/drivers/cpufreq
diff options
context:
space:
mode:
authorVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>2006-10-03 19:38:45 (GMT)
committerDave Jones <davej@redhat.com>2006-10-15 23:57:11 (GMT)
commitdfde5d62ed9b28b0bda676c16e8cb635df244ef2 (patch)
tree12c690189fcc7155389860beae554199456b7d3e /drivers/cpufreq
parenta6f6e6e6ab464c9d1dff66570b78be2f66d8ba3d (diff)
downloadlinux-dfde5d62ed9b28b0bda676c16e8cb635df244ef2.tar.xz
[CPUFREQ][8/8] acpi-cpufreq: Add support for freq feedback from hardware
Enable ondemand governor and acpi-cpufreq to use IA32_APERF and IA32_MPERF MSR to get active frequency feedback for the last sampling interval. This will make ondemand take right frequency decisions when hardware coordination of frequency is going on. Without APERF/MPERF, ondemand can take wrong decision at times due to underlying hardware coordination or TM2. Example: * CPU 0 and CPU 1 are hardware cooridnated. * CPU 1 running at highest frequency. * CPU 0 was running at highest freq. Now ondemand reduces it to some intermediate frequency based on utilization. * Due to underlying hardware coordination with other CPU 1, CPU 0 continues to run at highest frequency (as long as other CPU is at highest). * When ondemand samples CPU 0 again next time, without actual frequency feedback from APERF/MPERF, it will think that previous frequency change was successful and can go to wrong target frequency. This is because it thinks that utilization it has got this sampling interval is when running at intermediate frequency, rather than actual highest frequency. More information about IA32_APERF IA32_MPERF MSR: Refer to IA-32 IntelĀ® Architecture Software Developer's Manual at http://developer.intel.com Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
Diffstat (limited to 'drivers/cpufreq')
-rw-r--r--drivers/cpufreq/cpufreq.c20
-rw-r--r--drivers/cpufreq/cpufreq_ondemand.c9
2 files changed, 28 insertions, 1 deletions
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 86e69b7..56c433e 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1274,6 +1274,26 @@ int cpufreq_driver_target(struct cpufreq_policy *policy,
}
EXPORT_SYMBOL_GPL(cpufreq_driver_target);
+int cpufreq_driver_getavg(struct cpufreq_policy *policy)
+{
+ int ret = 0;
+
+ policy = cpufreq_cpu_get(policy->cpu);
+ if (!policy)
+ return -EINVAL;
+
+ mutex_lock(&policy->lock);
+
+ if (cpu_online(policy->cpu) && cpufreq_driver->getavg)
+ ret = cpufreq_driver->getavg(policy->cpu);
+
+ mutex_unlock(&policy->lock);
+
+ cpufreq_cpu_put(policy);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpufreq_driver_getavg);
+
/*
* Locking: Must be called with the lock_cpu_hotplug() lock held
* when "event" is CPUFREQ_GOV_LIMITS
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index bf8aa45..291cfe9 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -393,8 +393,15 @@ static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
* policy. To be safe, we focus 10 points under the threshold.
*/
if (load < (dbs_tuners_ins.up_threshold - 10)) {
- unsigned int freq_next = (policy->cur * load) /
+ unsigned int freq_next, freq_cur;
+
+ freq_cur = cpufreq_driver_getavg(policy);
+ if (!freq_cur)
+ freq_cur = policy->cur;
+
+ freq_next = (freq_cur * load) /
(dbs_tuners_ins.up_threshold - 10);
+
if (!dbs_tuners_ins.powersave_bias) {
__cpufreq_driver_target(policy, freq_next,
CPUFREQ_RELATION_L);