diff options
author | Viresh Kumar <viresh.kumar@linaro.org> | 2013-04-04 12:54:16 (GMT) |
---|---|---|
committer | Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 2013-04-10 11:19:24 (GMT) |
commit | 59a2e613d07fbd592ff711c87458eabcf9c98902 (patch) | |
tree | 18ebcdccafa518791a17c94133144d17e73f6807 /drivers/cpufreq | |
parent | b7e614c8bf5c898b172d7dfed9853fdda35be5cc (diff) | |
download | linux-59a2e613d07fbd592ff711c87458eabcf9c98902.tar.xz |
cpufreq: sa11x0: move cpufreq driver to drivers/cpufreq
This patch moves cpufreq driver of ARM based sa11x0 platform to drivers/cpufreq.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Diffstat (limited to 'drivers/cpufreq')
-rw-r--r-- | drivers/cpufreq/Kconfig.arm | 6 | ||||
-rw-r--r-- | drivers/cpufreq/Makefile | 2 | ||||
-rw-r--r-- | drivers/cpufreq/sa1100-cpufreq.c | 247 | ||||
-rw-r--r-- | drivers/cpufreq/sa1110-cpufreq.c | 406 |
4 files changed, 661 insertions, 0 deletions
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 97f208d..09da6a3 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -127,6 +127,12 @@ config ARM_S5PV210_CPUFREQ If in doubt, say N. +config ARM_SA1100_CPUFREQ + bool + +config ARM_SA1110_CPUFREQ + bool + config ARM_SPEAR_CPUFREQ bool "SPEAr CPUFreq support" depends on PLAT_SPEAR diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 8d58016..8b21016 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -66,6 +66,8 @@ obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o +obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o +obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o obj-$(CONFIG_ARCH_TEGRA) += tegra-cpufreq.o diff --git a/drivers/cpufreq/sa1100-cpufreq.c b/drivers/cpufreq/sa1100-cpufreq.c new file mode 100644 index 0000000..cff18e8 --- /dev/null +++ b/drivers/cpufreq/sa1100-cpufreq.c @@ -0,0 +1,247 @@ +/* + * cpu-sa1100.c: clock scaling for the SA1100 + * + * Copyright (C) 2000 2001, The Delft University of Technology + * + * Authors: + * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version + * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl): + * - major rewrite for linux-2.3.99 + * - rewritten for the more generic power management scheme in + * linux-2.4.5-rmk1 + * + * This software has been developed while working on the LART + * computing board (http://www.lartmaker.nl/), which is + * sponsored by the Mobile Multi-media Communications + * (http://www.mobimedia.org/) and Ubiquitous Communications + * (http://www.ubicom.tudelft.nl/) projects. + * + * The authors can be reached at: + * + * Erik Mouw + * Information and Communication Theory Group + * Faculty of Information Technology and Systems + * Delft University of Technology + * P.O. Box 5031 + * 2600 GA Delft + * The Netherlands + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * + * Theory of operations + * ==================== + * + * Clock scaling can be used to lower the power consumption of the CPU + * core. This will give you a somewhat longer running time. + * + * The SA-1100 has a single register to change the core clock speed: + * + * PPCR 0x90020014 PLL config + * + * However, the DRAM timings are closely related to the core clock + * speed, so we need to change these, too. The used registers are: + * + * MDCNFG 0xA0000000 DRAM config + * MDCAS0 0xA0000004 Access waveform + * MDCAS1 0xA0000008 Access waveform + * MDCAS2 0xA000000C Access waveform + * + * Care must be taken to change the DRAM parameters the correct way, + * because otherwise the DRAM becomes unusable and the kernel will + * crash. + * + * The simple solution to avoid a kernel crash is to put the actual + * clock change in ROM and jump to that code from the kernel. The main + * disadvantage is that the ROM has to be modified, which is not + * possible on all SA-1100 platforms. Another disadvantage is that + * jumping to ROM makes clock switching unnecessary complicated. + * + * The idea behind this driver is that the memory configuration can be + * changed while running from DRAM (even with interrupts turned on!) + * as long as all re-configuration steps yield a valid DRAM + * configuration. The advantages are clear: it will run on all SA-1100 + * platforms, and the code is very simple. + * + * If you really want to understand what is going on in + * sa1100_update_dram_timings(), you'll have to read sections 8.2, + * 9.5.7.3, and 10.2 from the "Intel StrongARM SA-1100 Microprocessor + * Developers Manual" (available for free from Intel). + * + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/io.h> + +#include <asm/cputype.h> + +#include <mach/generic.h> +#include <mach/hardware.h> + +struct sa1100_dram_regs { + int speed; + u32 mdcnfg; + u32 mdcas0; + u32 mdcas1; + u32 mdcas2; +}; + + +static struct cpufreq_driver sa1100_driver; + +static struct sa1100_dram_regs sa1100_dram_settings[] = { + /*speed, mdcnfg, mdcas0, mdcas1, mdcas2, clock freq */ + { 59000, 0x00dc88a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 59.0 MHz */ + { 73700, 0x011490a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 73.7 MHz */ + { 88500, 0x014e90a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 88.5 MHz */ + {103200, 0x01889923, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 103.2 MHz */ + {118000, 0x01c29923, 0x9999998f, 0xfffffff9, 0xffffffff},/* 118.0 MHz */ + {132700, 0x01fb2123, 0x9999998f, 0xfffffff9, 0xffffffff},/* 132.7 MHz */ + {147500, 0x02352123, 0x3333330f, 0xfffffff3, 0xffffffff},/* 147.5 MHz */ + {162200, 0x026b29a3, 0x38e38e1f, 0xfff8e38e, 0xffffffff},/* 162.2 MHz */ + {176900, 0x02a329a3, 0x71c71c1f, 0xfff1c71c, 0xffffffff},/* 176.9 MHz */ + {191700, 0x02dd31a3, 0xe38e383f, 0xffe38e38, 0xffffffff},/* 191.7 MHz */ + {206400, 0x03153223, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 206.4 MHz */ + {221200, 0x034fba23, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 221.2 MHz */ + {235900, 0x03853a23, 0xe1e1e07f, 0xe1e1e1e1, 0xffffffe1},/* 235.9 MHz */ + {250700, 0x03bf3aa3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 250.7 MHz */ + {265400, 0x03f7c2a3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 265.4 MHz */ + {280200, 0x0431c2a3, 0x878780ff, 0x87878787, 0xffffff87},/* 280.2 MHz */ + { 0, 0, 0, 0, 0 } /* last entry */ +}; + +static void sa1100_update_dram_timings(int current_speed, int new_speed) +{ + struct sa1100_dram_regs *settings = sa1100_dram_settings; + + /* find speed */ + while (settings->speed != 0) { + if (new_speed == settings->speed) + break; + + settings++; + } + + if (settings->speed == 0) { + panic("%s: couldn't find dram setting for speed %d\n", + __func__, new_speed); + } + + /* No risk, no fun: run with interrupts on! */ + if (new_speed > current_speed) { + /* We're going FASTER, so first relax the memory + * timings before changing the core frequency + */ + + /* Half the memory access clock */ + MDCNFG |= MDCNFG_CDB2; + + /* The order of these statements IS important, keep 8 + * pulses!! + */ + MDCAS2 = settings->mdcas2; + MDCAS1 = settings->mdcas1; + MDCAS0 = settings->mdcas0; + MDCNFG = settings->mdcnfg; + } else { + /* We're going SLOWER: first decrease the core + * frequency and then tighten the memory settings. + */ + + /* Half the memory access clock */ + MDCNFG |= MDCNFG_CDB2; + + /* The order of these statements IS important, keep 8 + * pulses!! + */ + MDCAS0 = settings->mdcas0; + MDCAS1 = settings->mdcas1; + MDCAS2 = settings->mdcas2; + MDCNFG = settings->mdcnfg; + } +} + +static int sa1100_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int cur = sa11x0_getspeed(0); + unsigned int new_ppcr; + struct cpufreq_freqs freqs; + + new_ppcr = sa11x0_freq_to_ppcr(target_freq); + switch (relation) { + case CPUFREQ_RELATION_L: + if (sa11x0_ppcr_to_freq(new_ppcr) > policy->max) + new_ppcr--; + break; + case CPUFREQ_RELATION_H: + if ((sa11x0_ppcr_to_freq(new_ppcr) > target_freq) && + (sa11x0_ppcr_to_freq(new_ppcr - 1) >= policy->min)) + new_ppcr--; + break; + } + + freqs.old = cur; + freqs.new = sa11x0_ppcr_to_freq(new_ppcr); + + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + + if (freqs.new > cur) + sa1100_update_dram_timings(cur, freqs.new); + + PPCR = new_ppcr; + + if (freqs.new < cur) + sa1100_update_dram_timings(cur, freqs.new); + + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + + return 0; +} + +static int __init sa1100_cpu_init(struct cpufreq_policy *policy) +{ + if (policy->cpu != 0) + return -EINVAL; + policy->cur = policy->min = policy->max = sa11x0_getspeed(0); + policy->cpuinfo.min_freq = 59000; + policy->cpuinfo.max_freq = 287000; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + return 0; +} + +static struct cpufreq_driver sa1100_driver __refdata = { + .flags = CPUFREQ_STICKY, + .verify = sa11x0_verify_speed, + .target = sa1100_target, + .get = sa11x0_getspeed, + .init = sa1100_cpu_init, + .name = "sa1100", +}; + +static int __init sa1100_dram_init(void) +{ + if (cpu_is_sa1100()) + return cpufreq_register_driver(&sa1100_driver); + else + return -ENODEV; +} + +arch_initcall(sa1100_dram_init); diff --git a/drivers/cpufreq/sa1110-cpufreq.c b/drivers/cpufreq/sa1110-cpufreq.c new file mode 100644 index 0000000..39c90b6 --- /dev/null +++ b/drivers/cpufreq/sa1110-cpufreq.c @@ -0,0 +1,406 @@ +/* + * linux/arch/arm/mach-sa1100/cpu-sa1110.c + * + * Copyright (C) 2001 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Note: there are two erratas that apply to the SA1110 here: + * 7 - SDRAM auto-power-up failure (rev A0) + * 13 - Corruption of internal register reads/writes following + * SDRAM reads (rev A0, B0, B1) + * + * We ignore rev. A0 and B0 devices; I don't think they're worth supporting. + * + * The SDRAM type can be passed on the command line as cpu_sa1110.sdram=type + */ +#include <linux/cpufreq.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/moduleparam.h> +#include <linux/types.h> + +#include <asm/cputype.h> +#include <asm/mach-types.h> + +#include <mach/generic.h> +#include <mach/hardware.h> + +#undef DEBUG + +struct sdram_params { + const char name[20]; + u_char rows; /* bits */ + u_char cas_latency; /* cycles */ + u_char tck; /* clock cycle time (ns) */ + u_char trcd; /* activate to r/w (ns) */ + u_char trp; /* precharge to activate (ns) */ + u_char twr; /* write recovery time (ns) */ + u_short refresh; /* refresh time for array (us) */ +}; + +struct sdram_info { + u_int mdcnfg; + u_int mdrefr; + u_int mdcas[3]; +}; + +static struct sdram_params sdram_tbl[] __initdata = { + { /* Toshiba TC59SM716 CL2 */ + .name = "TC59SM716-CL2", + .rows = 12, + .tck = 10, + .trcd = 20, + .trp = 20, + .twr = 10, + .refresh = 64000, + .cas_latency = 2, + }, { /* Toshiba TC59SM716 CL3 */ + .name = "TC59SM716-CL3", + .rows = 12, + .tck = 8, + .trcd = 20, + .trp = 20, + .twr = 8, + .refresh = 64000, + .cas_latency = 3, + }, { /* Samsung K4S641632D TC75 */ + .name = "K4S641632D", + .rows = 14, + .tck = 9, + .trcd = 27, + .trp = 20, + .twr = 9, + .refresh = 64000, + .cas_latency = 3, + }, { /* Samsung K4S281632B-1H */ + .name = "K4S281632B-1H", + .rows = 12, + .tck = 10, + .trp = 20, + .twr = 10, + .refresh = 64000, + .cas_latency = 3, + }, { /* Samsung KM416S4030CT */ + .name = "KM416S4030CT", + .rows = 13, + .tck = 8, + .trcd = 24, /* 3 CLKs */ + .trp = 24, /* 3 CLKs */ + .twr = 16, /* Trdl: 2 CLKs */ + .refresh = 64000, + .cas_latency = 3, + }, { /* Winbond W982516AH75L CL3 */ + .name = "W982516AH75L", + .rows = 16, + .tck = 8, + .trcd = 20, + .trp = 20, + .twr = 8, + .refresh = 64000, + .cas_latency = 3, + }, { /* Micron MT48LC8M16A2TG-75 */ + .name = "MT48LC8M16A2TG-75", + .rows = 12, + .tck = 8, + .trcd = 20, + .trp = 20, + .twr = 8, + .refresh = 64000, + .cas_latency = 3, + }, +}; + +static struct sdram_params sdram_params; + +/* + * Given a period in ns and frequency in khz, calculate the number of + * cycles of frequency in period. Note that we round up to the next + * cycle, even if we are only slightly over. + */ +static inline u_int ns_to_cycles(u_int ns, u_int khz) +{ + return (ns * khz + 999999) / 1000000; +} + +/* + * Create the MDCAS register bit pattern. + */ +static inline void set_mdcas(u_int *mdcas, int delayed, u_int rcd) +{ + u_int shift; + + rcd = 2 * rcd - 1; + shift = delayed + 1 + rcd; + + mdcas[0] = (1 << rcd) - 1; + mdcas[0] |= 0x55555555 << shift; + mdcas[1] = mdcas[2] = 0x55555555 << (shift & 1); +} + +static void +sdram_calculate_timing(struct sdram_info *sd, u_int cpu_khz, + struct sdram_params *sdram) +{ + u_int mem_khz, sd_khz, trp, twr; + + mem_khz = cpu_khz / 2; + sd_khz = mem_khz; + + /* + * If SDCLK would invalidate the SDRAM timings, + * run SDCLK at half speed. + * + * CPU steppings prior to B2 must either run the memory at + * half speed or use delayed read latching (errata 13). + */ + if ((ns_to_cycles(sdram->tck, sd_khz) > 1) || + (CPU_REVISION < CPU_SA1110_B2 && sd_khz < 62000)) + sd_khz /= 2; + + sd->mdcnfg = MDCNFG & 0x007f007f; + + twr = ns_to_cycles(sdram->twr, mem_khz); + + /* trp should always be >1 */ + trp = ns_to_cycles(sdram->trp, mem_khz) - 1; + if (trp < 1) + trp = 1; + + sd->mdcnfg |= trp << 8; + sd->mdcnfg |= trp << 24; + sd->mdcnfg |= sdram->cas_latency << 12; + sd->mdcnfg |= sdram->cas_latency << 28; + sd->mdcnfg |= twr << 14; + sd->mdcnfg |= twr << 30; + + sd->mdrefr = MDREFR & 0xffbffff0; + sd->mdrefr |= 7; + + if (sd_khz != mem_khz) + sd->mdrefr |= MDREFR_K1DB2; + + /* initial number of '1's in MDCAS + 1 */ + set_mdcas(sd->mdcas, sd_khz >= 62000, + ns_to_cycles(sdram->trcd, mem_khz)); + +#ifdef DEBUG + printk(KERN_DEBUG "MDCNFG: %08x MDREFR: %08x MDCAS0: %08x MDCAS1: %08x MDCAS2: %08x\n", + sd->mdcnfg, sd->mdrefr, sd->mdcas[0], sd->mdcas[1], + sd->mdcas[2]); +#endif +} + +/* + * Set the SDRAM refresh rate. + */ +static inline void sdram_set_refresh(u_int dri) +{ + MDREFR = (MDREFR & 0xffff000f) | (dri << 4); + (void) MDREFR; +} + +/* + * Update the refresh period. We do this such that we always refresh + * the SDRAMs within their permissible period. The refresh period is + * always a multiple of the memory clock (fixed at cpu_clock / 2). + * + * FIXME: we don't currently take account of burst accesses here, + * but neither do Intels DM nor Angel. + */ +static void +sdram_update_refresh(u_int cpu_khz, struct sdram_params *sdram) +{ + u_int ns_row = (sdram->refresh * 1000) >> sdram->rows; + u_int dri = ns_to_cycles(ns_row, cpu_khz / 2) / 32; + +#ifdef DEBUG + mdelay(250); + printk(KERN_DEBUG "new dri value = %d\n", dri); +#endif + + sdram_set_refresh(dri); +} + +/* + * Ok, set the CPU frequency. + */ +static int sa1110_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct sdram_params *sdram = &sdram_params; + struct cpufreq_freqs freqs; + struct sdram_info sd; + unsigned long flags; + unsigned int ppcr, unused; + + switch (relation) { + case CPUFREQ_RELATION_L: + ppcr = sa11x0_freq_to_ppcr(target_freq); + if (sa11x0_ppcr_to_freq(ppcr) > policy->max) + ppcr--; + break; + case CPUFREQ_RELATION_H: + ppcr = sa11x0_freq_to_ppcr(target_freq); + if (ppcr && (sa11x0_ppcr_to_freq(ppcr) > target_freq) && + (sa11x0_ppcr_to_freq(ppcr-1) >= policy->min)) + ppcr--; + break; + default: + return -EINVAL; + } + + freqs.old = sa11x0_getspeed(0); + freqs.new = sa11x0_ppcr_to_freq(ppcr); + + sdram_calculate_timing(&sd, freqs.new, sdram); + +#if 0 + /* + * These values are wrong according to the SA1110 documentation + * and errata, but they seem to work. Need to get a storage + * scope on to the SDRAM signals to work out why. + */ + if (policy->max < 147500) { + sd.mdrefr |= MDREFR_K1DB2; + sd.mdcas[0] = 0xaaaaaa7f; + } else { + sd.mdrefr &= ~MDREFR_K1DB2; + sd.mdcas[0] = 0xaaaaaa9f; + } + sd.mdcas[1] = 0xaaaaaaaa; + sd.mdcas[2] = 0xaaaaaaaa; +#endif + + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + + /* + * The clock could be going away for some time. Set the SDRAMs + * to refresh rapidly (every 64 memory clock cycles). To get + * through the whole array, we need to wait 262144 mclk cycles. + * We wait 20ms to be safe. + */ + sdram_set_refresh(2); + if (!irqs_disabled()) + msleep(20); + else + mdelay(20); + + /* + * Reprogram the DRAM timings with interrupts disabled, and + * ensure that we are doing this within a complete cache line. + * This means that we won't access SDRAM for the duration of + * the programming. + */ + local_irq_save(flags); + asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (0)); + udelay(10); + __asm__ __volatile__("\n\ + b 2f \n\ + .align 5 \n\ +1: str %3, [%1, #0] @ MDCNFG \n\ + str %4, [%1, #28] @ MDREFR \n\ + str %5, [%1, #4] @ MDCAS0 \n\ + str %6, [%1, #8] @ MDCAS1 \n\ + str %7, [%1, #12] @ MDCAS2 \n\ + str %8, [%2, #0] @ PPCR \n\ + ldr %0, [%1, #0] \n\ + b 3f \n\ +2: b 1b \n\ +3: nop \n\ + nop" + : "=&r" (unused) + : "r" (&MDCNFG), "r" (&PPCR), "0" (sd.mdcnfg), + "r" (sd.mdrefr), "r" (sd.mdcas[0]), + "r" (sd.mdcas[1]), "r" (sd.mdcas[2]), "r" (ppcr)); + local_irq_restore(flags); + + /* + * Now, return the SDRAM refresh back to normal. + */ + sdram_update_refresh(freqs.new, sdram); + + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + + return 0; +} + +static int __init sa1110_cpu_init(struct cpufreq_policy *policy) +{ + if (policy->cpu != 0) + return -EINVAL; + policy->cur = policy->min = policy->max = sa11x0_getspeed(0); + policy->cpuinfo.min_freq = 59000; + policy->cpuinfo.max_freq = 287000; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + return 0; +} + +/* sa1110_driver needs __refdata because it must remain after init registers + * it with cpufreq_register_driver() */ +static struct cpufreq_driver sa1110_driver __refdata = { + .flags = CPUFREQ_STICKY, + .verify = sa11x0_verify_speed, + .target = sa1110_target, + .get = sa11x0_getspeed, + .init = sa1110_cpu_init, + .name = "sa1110", +}; + +static struct sdram_params *sa1110_find_sdram(const char *name) +{ + struct sdram_params *sdram; + + for (sdram = sdram_tbl; sdram < sdram_tbl + ARRAY_SIZE(sdram_tbl); + sdram++) + if (strcmp(name, sdram->name) == 0) + return sdram; + + return NULL; +} + +static char sdram_name[16]; + +static int __init sa1110_clk_init(void) +{ + struct sdram_params *sdram; + const char *name = sdram_name; + + if (!cpu_is_sa1110()) + return -ENODEV; + + if (!name[0]) { + if (machine_is_assabet()) + name = "TC59SM716-CL3"; + if (machine_is_pt_system3()) + name = "K4S641632D"; + if (machine_is_h3100()) + name = "KM416S4030CT"; + if (machine_is_jornada720()) + name = "K4S281632B-1H"; + if (machine_is_nanoengine()) + name = "MT48LC8M16A2TG-75"; + } + + sdram = sa1110_find_sdram(name); + if (sdram) { + printk(KERN_DEBUG "SDRAM: tck: %d trcd: %d trp: %d" + " twr: %d refresh: %d cas_latency: %d\n", + sdram->tck, sdram->trcd, sdram->trp, + sdram->twr, sdram->refresh, sdram->cas_latency); + + memcpy(&sdram_params, sdram, sizeof(sdram_params)); + + return cpufreq_register_driver(&sa1110_driver); + } + + return 0; +} + +module_param_string(sdram, sdram_name, sizeof(sdram_name), 0); +arch_initcall(sa1110_clk_init); |