DMA: PL330: Merge PL330 driver into drivers/dma/

Currently there were two part of DMAC PL330 driver for
support old styled s3c-pl330 which has been merged into
drivers/dma/pl330.c driver. Actually, there is no reason
to separate them now.

Basically this patch merges arch/arm/common/pl330.c into
drivers/dma/pl330.c driver and removes useless exported
symbol, externed function and so on.

The newer pl330 driver tested on SMDKV310 and SMDK4212 boards

Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>

2 files changed, 2113 insertions, 2 deletions

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index f1a2749..65c61db 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -201,7 +201,6 @@ config PL330_DMA
 	tristate "DMA API Driver for PL330"
 	select DMA_ENGINE
 	depends on ARM_AMBA
-	select PL330
 	help
 	  Select if your platform has one or more PL330 DMACs.
 	  You need to provide platform specific settings via
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 84ebea9..2e351f4 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -1,4 +1,6 @@
-/* linux/drivers/dma/pl330.c
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
  * Copyright (C) 2010 Samsung Electronics Co. Ltd.
  *	Jaswinder Singh <jassi.brar@samsung.com>
@@ -9,10 +11,15 @@
  * (at your option) any later version.
  */
 
+#include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/module.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
 #include <linux/interrupt.h>
 #include <linux/amba/bus.h>
@@ -21,8 +28,489 @@
 #include <linux/scatterlist.h>
 #include <linux/of.h>
 
+#define PL330_MAX_CHAN		8
+#define PL330_MAX_IRQS		32
+#define PL330_MAX_PERI		32
+
+enum pl330_srccachectrl {
+	SCCTRL0,	/* Noncacheable and nonbufferable */
+	SCCTRL1,	/* Bufferable only */
+	SCCTRL2,	/* Cacheable, but do not allocate */
+	SCCTRL3,	/* Cacheable and bufferable, but do not allocate */
+	SINVALID1,
+	SINVALID2,
+	SCCTRL6,	/* Cacheable write-through, allocate on reads only */
+	SCCTRL7,	/* Cacheable write-back, allocate on reads only */
+};
+
+enum pl330_dstcachectrl {
+	DCCTRL0,	/* Noncacheable and nonbufferable */
+	DCCTRL1,	/* Bufferable only */
+	DCCTRL2,	/* Cacheable, but do not allocate */
+	DCCTRL3,	/* Cacheable and bufferable, but do not allocate */
+	DINVALID1 = 8,
+	DINVALID2,
+	DCCTRL6,	/* Cacheable write-through, allocate on writes only */
+	DCCTRL7,	/* Cacheable write-back, allocate on writes only */
+};
+
+enum pl330_byteswap {
+	SWAP_NO,
+	SWAP_2,
+	SWAP_4,
+	SWAP_8,
+	SWAP_16,
+};
+
+enum pl330_reqtype {
+	MEMTOMEM,
+	MEMTODEV,
+	DEVTOMEM,
+	DEVTODEV,
+};
+
+/* Register and Bit field Definitions */
+#define DS			0x0
+#define DS_ST_STOP		0x0
+#define DS_ST_EXEC		0x1
+#define DS_ST_CMISS		0x2
+#define DS_ST_UPDTPC		0x3
+#define DS_ST_WFE		0x4
+#define DS_ST_ATBRR		0x5
+#define DS_ST_QBUSY		0x6
+#define DS_ST_WFP		0x7
+#define DS_ST_KILL		0x8
+#define DS_ST_CMPLT		0x9
+#define DS_ST_FLTCMP		0xe
+#define DS_ST_FAULT		0xf
+
+#define DPC			0x4
+#define INTEN			0x20
+#define ES			0x24
+#define INTSTATUS		0x28
+#define INTCLR			0x2c
+#define FSM			0x30
+#define FSC			0x34
+#define FTM			0x38
+
+#define _FTC			0x40
+#define FTC(n)			(_FTC + (n)*0x4)
+
+#define _CS			0x100
+#define CS(n)			(_CS + (n)*0x8)
+#define CS_CNS			(1 << 21)
+
+#define _CPC			0x104
+#define CPC(n)			(_CPC + (n)*0x8)
+
+#define _SA			0x400
+#define SA(n)			(_SA + (n)*0x20)
+
+#define _DA			0x404
+#define DA(n)			(_DA + (n)*0x20)
+
+#define _CC			0x408
+#define CC(n)			(_CC + (n)*0x20)
+
+#define CC_SRCINC		(1 << 0)
+#define CC_DSTINC		(1 << 14)
+#define CC_SRCPRI		(1 << 8)
+#define CC_DSTPRI		(1 << 22)
+#define CC_SRCNS		(1 << 9)
+#define CC_DSTNS		(1 << 23)
+#define CC_SRCIA		(1 << 10)
+#define CC_DSTIA		(1 << 24)
+#define CC_SRCBRSTLEN_SHFT	4
+#define CC_DSTBRSTLEN_SHFT	18
+#define CC_SRCBRSTSIZE_SHFT	1
+#define CC_DSTBRSTSIZE_SHFT	15
+#define CC_SRCCCTRL_SHFT	11
+#define CC_SRCCCTRL_MASK	0x7
+#define CC_DSTCCTRL_SHFT	25
+#define CC_DRCCCTRL_MASK	0x7
+#define CC_SWAP_SHFT		28
+
+#define _LC0			0x40c
+#define LC0(n)			(_LC0 + (n)*0x20)
+
+#define _LC1			0x410
+#define LC1(n)			(_LC1 + (n)*0x20)
+
+#define DBGSTATUS		0xd00
+#define DBG_BUSY		(1 << 0)
+
+#define DBGCMD			0xd04
+#define DBGINST0		0xd08
+#define DBGINST1		0xd0c
+
+#define CR0			0xe00
+#define CR1			0xe04
+#define CR2			0xe08
+#define CR3			0xe0c
+#define CR4			0xe10
+#define CRD			0xe14
+
+#define PERIPH_ID		0xfe0
+#define PCELL_ID		0xff0
+
+#define CR0_PERIPH_REQ_SET	(1 << 0)
+#define CR0_BOOT_EN_SET		(1 << 1)
+#define CR0_BOOT_MAN_NS		(1 << 2)
+#define CR0_NUM_CHANS_SHIFT	4
+#define CR0_NUM_CHANS_MASK	0x7
+#define CR0_NUM_PERIPH_SHIFT	12
+#define CR0_NUM_PERIPH_MASK	0x1f
+#define CR0_NUM_EVENTS_SHIFT	17
+#define CR0_NUM_EVENTS_MASK	0x1f
+
+#define CR1_ICACHE_LEN_SHIFT	0
+#define CR1_ICACHE_LEN_MASK	0x7
+#define CR1_NUM_ICACHELINES_SHIFT	4
+#define CR1_NUM_ICACHELINES_MASK	0xf
+
+#define CRD_DATA_WIDTH_SHIFT	0
+#define CRD_DATA_WIDTH_MASK	0x7
+#define CRD_WR_CAP_SHIFT	4
+#define CRD_WR_CAP_MASK		0x7
+#define CRD_WR_Q_DEP_SHIFT	8
+#define CRD_WR_Q_DEP_MASK	0xf
+#define CRD_RD_CAP_SHIFT	12
+#define CRD_RD_CAP_MASK		0x7
+#define CRD_RD_Q_DEP_SHIFT	16
+#define CRD_RD_Q_DEP_MASK	0xf
+#define CRD_DATA_BUFF_SHIFT	20
+#define CRD_DATA_BUFF_MASK	0x3ff
+
+#define PART			0x330
+#define DESIGNER		0x41
+#define REVISION		0x0
+#define INTEG_CFG		0x0
+#define PERIPH_ID_VAL		((PART << 0) | (DESIGNER << 12))
+
+#define PCELL_ID_VAL		0xb105f00d
+
+#define PL330_STATE_STOPPED		(1 << 0)
+#define PL330_STATE_EXECUTING		(1 << 1)
+#define PL330_STATE_WFE			(1 << 2)
+#define PL330_STATE_FAULTING		(1 << 3)
+#define PL330_STATE_COMPLETING		(1 << 4)
+#define PL330_STATE_WFP			(1 << 5)
+#define PL330_STATE_KILLING		(1 << 6)
+#define PL330_STATE_FAULT_COMPLETING	(1 << 7)
+#define PL330_STATE_CACHEMISS		(1 << 8)
+#define PL330_STATE_UPDTPC		(1 << 9)
+#define PL330_STATE_ATBARRIER		(1 << 10)
+#define PL330_STATE_QUEUEBUSY		(1 << 11)
+#define PL330_STATE_INVALID		(1 << 15)
+
+#define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
+				| PL330_STATE_WFE | PL330_STATE_FAULTING)
+
+#define CMD_DMAADDH		0x54
+#define CMD_DMAEND		0x00
+#define CMD_DMAFLUSHP		0x35
+#define CMD_DMAGO		0xa0
+#define CMD_DMALD		0x04
+#define CMD_DMALDP		0x25
+#define CMD_DMALP		0x20
+#define CMD_DMALPEND		0x28
+#define CMD_DMAKILL		0x01
+#define CMD_DMAMOV		0xbc
+#define CMD_DMANOP		0x18
+#define CMD_DMARMB		0x12
+#define CMD_DMASEV		0x34
+#define CMD_DMAST		0x08
+#define CMD_DMASTP		0x29
+#define CMD_DMASTZ		0x0c
+#define CMD_DMAWFE		0x36
+#define CMD_DMAWFP		0x30
+#define CMD_DMAWMB		0x13
+
+#define SZ_DMAADDH		3
+#define SZ_DMAEND		1
+#define SZ_DMAFLUSHP		2
+#define SZ_DMALD		1
+#define SZ_DMALDP		2
+#define SZ_DMALP		2
+#define SZ_DMALPEND		2
+#define SZ_DMAKILL		1
+#define SZ_DMAMOV		6
+#define SZ_DMANOP		1
+#define SZ_DMARMB		1
+#define SZ_DMASEV		2
+#define SZ_DMAST		1
+#define SZ_DMASTP		2
+#define SZ_DMASTZ		1
+#define SZ_DMAWFE		2
+#define SZ_DMAWFP		2
+#define SZ_DMAWMB		1
+#define SZ_DMAGO		6
+
+#define BRST_LEN(ccr)		((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
+#define BRST_SIZE(ccr)		(1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
+
+#define BYTE_TO_BURST(b, ccr)	((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
+#define BURST_TO_BYTE(c, ccr)	((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
+
+/*
+ * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
+ * at 1byte/burst for P<->M and M<->M respectively.
+ * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
+ * should be enough for P<->M and M<->M respectively.
+ */
+#define MCODE_BUFF_PER_REQ	256
+
+/* If the _pl330_req is available to the client */
+#define IS_FREE(req)	(*((u8 *)((req)->mc_cpu)) == CMD_DMAEND)
+
+/* Use this _only_ to wait on transient states */
+#define UNTIL(t, s)	while (!(_state(t) & (s))) cpu_relax();
+
+#ifdef PL330_DEBUG_MCGEN
+static unsigned cmd_line;
+#define PL330_DBGCMD_DUMP(off, x...)	do { \
+						printk("%x:", cmd_line); \
+						printk(x); \
+						cmd_line += off; \
+					} while (0)
+#define PL330_DBGMC_START(addr)		(cmd_line = addr)
+#else
+#define PL330_DBGCMD_DUMP(off, x...)	do {} while (0)
+#define PL330_DBGMC_START(addr)		do {} while (0)
+#endif
+
+/* The number of default descriptors */
 #define NR_DEFAULT_DESC	16
 
+/* Populated by the PL330 core driver for DMA API driver's info */
+struct pl330_config {
+	u32	periph_id;
+	u32	pcell_id;
+#define DMAC_MODE_NS	(1 << 0)
+	unsigned int	mode;
+	unsigned int	data_bus_width:10; /* In number of bits */
+	unsigned int	data_buf_dep:10;
+	unsigned int	num_chan:4;
+	unsigned int	num_peri:6;
+	u32		peri_ns;
+	unsigned int	num_events:6;
+	u32		irq_ns;
+};
+
+/* Handle to the DMAC provided to the PL330 core */
+struct pl330_info {
+	/* Owning device */
+	struct device *dev;
+	/* Size of MicroCode buffers for each channel. */
+	unsigned mcbufsz;
+	/* ioremap'ed address of PL330 registers. */
+	void __iomem	*base;
+	/* Client can freely use it. */
+	void	*client_data;
+	/* PL330 core data, Client must not touch it. */
+	void	*pl330_data;
+	/* Populated by the PL330 core driver during pl330_add */
+	struct pl330_config	pcfg;
+	/*
+	 * If the DMAC has some reset mechanism, then the
+	 * client may want to provide pointer to the method.
+	 */
+	void (*dmac_reset)(struct pl330_info *pi);
+};
+
+/**
+ * Request Configuration.
+ * The PL330 core does not modify this and uses the last
+ * working configuration if the request doesn't provide any.
+ *
+ * The Client may want to provide this info only for the
+ * first request and a request with new settings.
+ */
+struct pl330_reqcfg {
+	/* Address Incrementing */
+	unsigned dst_inc:1;
+	unsigned src_inc:1;
+
+	/*
+	 * For now, the SRC & DST protection levels
+	 * and burst size/length are assumed same.
+	 */
+	bool nonsecure;
+	bool privileged;
+	bool insnaccess;
+	unsigned brst_len:5;
+	unsigned brst_size:3; /* in power of 2 */
+
+	enum pl330_dstcachectrl dcctl;
+	enum pl330_srccachectrl scctl;
+	enum pl330_byteswap swap;
+};
+
+/*
+ * One cycle of DMAC operation.
+ * There may be more than one xfer in a request.
+ */
+struct pl330_xfer {
+	u32 src_addr;
+	u32 dst_addr;
+	/* Size to xfer */
+	u32 bytes;
+	/*
+	 * Pointer to next xfer in the list.
+	 * The last xfer in the req must point to NULL.
+	 */
+	struct pl330_xfer *next;
+};
+
+/* The xfer callbacks are made with one of these arguments. */
+enum pl330_op_err {
+	/* The all xfers in the request were success. */
+	PL330_ERR_NONE,
+	/* If req aborted due to global error. */
+	PL330_ERR_ABORT,
+	/* If req failed due to problem with Channel. */
+	PL330_ERR_FAIL,
+};
+
+/* A request defining Scatter-Gather List ending with NULL xfer. */
+struct pl330_req {
+	enum pl330_reqtype rqtype;
+	/* Index of peripheral for the xfer. */
+	unsigned peri:5;
+	/* Unique token for this xfer, set by the client. */
+	void *token;
+	/* Callback to be called after xfer. */
+	void (*xfer_cb)(void *token, enum pl330_op_err err);
+	/* If NULL, req will be done at last set parameters. */
+	struct pl330_reqcfg *cfg;
+	/* Pointer to first xfer in the request. */
+	struct pl330_xfer *x;
+};
+
+/*
+ * To know the status of the channel and DMAC, the client
+ * provides a pointer to this structure. The PL330 core
+ * fills it with current information.
+ */
+struct pl330_chanstatus {
+	/*
+	 * If the DMAC engine halted due to some error,
+	 * the client should remove-add DMAC.
+	 */
+	bool dmac_halted;
+	/*
+	 * If channel is halted due to some error,
+	 * the client should ABORT/FLUSH and START the channel.
+	 */
+	bool faulting;
+	/* Location of last load */
+	u32 src_addr;
+	/* Location of last store */
+	u32 dst_addr;
+	/*
+	 * Pointer to the currently active req, NULL if channel is
+	 * inactive, even though the requests may be present.
+	 */
+	struct pl330_req *top_req;
+	/* Pointer to req waiting second in the queue if any. */
+	struct pl330_req *wait_req;
+};
+
+enum pl330_chan_op {
+	/* Start the channel */
+	PL330_OP_START,
+	/* Abort the active xfer */
+	PL330_OP_ABORT,
+	/* Stop xfer and flush queue */
+	PL330_OP_FLUSH,
+};
+
+struct _xfer_spec {
+	u32 ccr;
+	struct pl330_req *r;
+	struct pl330_xfer *x;
+};
+
+enum dmamov_dst {
+	SAR = 0,
+	CCR,
+	DAR,
+};
+
+enum pl330_dst {
+	SRC = 0,
+	DST,
+};
+
+enum pl330_cond {
+	SINGLE,
+	BURST,
+	ALWAYS,
+};
+
+struct _pl330_req {
+	u32 mc_bus;
+	void *mc_cpu;
+	/* Number of bytes taken to setup MC for the req */
+	u32 mc_len;
+	struct pl330_req *r;
+	/* Hook to attach to DMAC's list of reqs with due callback */
+	struct list_head rqd;
+};
+
+/* ToBeDone for tasklet */
+struct _pl330_tbd {
+	bool reset_dmac;
+	bool reset_mngr;
+	u8 reset_chan;
+};
+
+/* A DMAC Thread */
+struct pl330_thread {
+	u8 id;
+	int ev;
+	/* If the channel is not yet acquired by any client */
+	bool free;
+	/* Parent DMAC */
+	struct pl330_dmac *dmac;
+	/* Only two at a time */
+	struct _pl330_req req[2];
+	/* Index of the last enqueued request */
+	unsigned lstenq;
+	/* Index of the last submitted request or -1 if the DMA is stopped */
+	int req_running;
+};
+
+enum pl330_dmac_state {
+	UNINIT,
+	INIT,
+	DYING,
+};
+
+/* A DMAC */
+struct pl330_dmac {
+	spinlock_t		lock;
+	/* Holds list of reqs with due callbacks */
+	struct list_head	req_done;
+	/* Pointer to platform specific stuff */
+	struct pl330_info	*pinfo;
+	/* Maximum possible events/irqs */
+	int			events[32];
+	/* BUS address of MicroCode buffer */
+	u32			mcode_bus;
+	/* CPU address of MicroCode buffer */
+	void			*mcode_cpu;
+	/* List of all Channel threads */
+	struct pl330_thread	*channels;
+	/* Pointer to the MANAGER thread */
+	struct pl330_thread	*manager;
+	/* To handle bad news in interrupt */
+	struct tasklet_struct	tasks;
+	struct _pl330_tbd	dmac_tbd;
+	/* State of DMAC operation */
+	enum pl330_dmac_state	state;
+};
+
 enum desc_status {
 	/* In the DMAC pool */
 	FREE,
@@ -117,6 +605,1630 @@ struct dma_pl330_desc {
 	struct dma_pl330_chan *pchan;
 };
 
+static inline void _callback(struct pl330_req *r, enum pl330_op_err err)
+{
+	if (r && r->xfer_cb)
+		r->xfer_cb(r->token, err);
+}
+
+static inline bool _queue_empty(struct pl330_thread *thrd)
+{
+	return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1]))
+		? true : false;
+}
+
+static inline bool _queue_full(struct pl330_thread *thrd)
+{
+	return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1]))
+		? false : true;
+}
+
+static inline bool is_manager(struct pl330_thread *thrd)
+{
+	struct pl330_dmac *pl330 = thrd->dmac;
+
+	/* MANAGER is indexed at the end */
+	if (thrd->id == pl330->pinfo->pcfg.num_chan)
+		return true;
+	else
+		return false;
+}
+
+/* If manager of the thread is in Non-Secure mode */
+static inline bool _manager_ns(struct pl330_thread *thrd)
+{
+	struct pl330_dmac *pl330 = thrd->dmac;
+
+	return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false;
+}
+
+static inline u32 get_id(struct pl330_info *pi, u32 off)
+{
+	void __iomem *regs = pi->base;
+	u32 id = 0;
+
+	id |= (readb(regs + off + 0x0) << 0);
+	id |= (readb(regs + off + 0x4) << 8);
+	id |= (readb(regs + off + 0x8) << 16);
+	id |= (readb(regs + off + 0xc) << 24);
+
+	return id;
+}
+
+static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[],
+		enum pl330_dst da, u16 val)
+{
+	if (dry_run)
+		return SZ_DMAADDH;
+
+	buf[0] = CMD_DMAADDH;
+	buf[0] |= (da << 1);
+	*((u16 *)&buf[1]) = val;
+
+	PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n",
+		da == 1 ? "DA" : "SA", val);
+
+	return SZ_DMAADDH;
+}
+
+static inline u32 _emit_END(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMAEND;
+
+	buf[0] = CMD_DMAEND;
+
+	PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
+
+	return SZ_DMAEND;
+}
+
+static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
+{
+	if (dry_run)
+		return SZ_DMAFLUSHP;
+
+	buf[0] = CMD_DMAFLUSHP;
+
+	peri &= 0x1f;
+	peri <<= 3;
+	buf[1] = peri;
+
+	PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
+
+	return SZ_DMAFLUSHP;
+}
+
+static inline u32 _emit_LD(unsigned dry_run, u8 buf[],	enum pl330_cond cond)
+{
+	if (dry_run)
+		return SZ_DMALD;
+
+	buf[0] = CMD_DMALD;
+
+	if (cond == SINGLE)
+		buf[0] |= (0 << 1) | (1 << 0);
+	else if (cond == BURST)
+		buf[0] |= (1 << 1) | (1 << 0);
+
+	PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
+		cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
+
+	return SZ_DMALD;
+}
+
+static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
+		enum pl330_cond cond, u8 peri)
+{
+	if (dry_run)
+		return SZ_DMALDP;
+
+	buf[0] = CMD_DMALDP;
+
+	if (cond == BURST)
+		buf[0] |= (1 << 1);
+
+	peri &= 0x1f;
+	peri <<= 3;
+	buf[1] = peri;
+
+	PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
+		cond == SINGLE ? 'S' : 'B', peri >> 3);
+
+	return SZ_DMALDP;
+}
+
+static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
+		unsigned loop, u8 cnt)
+{
+	if (dry_run)
+		return SZ_DMALP;
+
+	buf[0] = CMD_DMALP;
+
+	if (loop)
+		buf[0] |= (1 << 1);
+
+	cnt--; /* DMAC increments by 1 internally */
+	buf[1] = cnt;
+
+	PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
+
+	return SZ_DMALP;
+}
+
+struct _arg_LPEND {
+	enum pl330_cond cond;
+	bool forever;
+	unsigned loop;
+	u8 bjump;
+};
+
+static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
+		const struct _arg_LPEND *arg)
+{
+	enum pl330_cond cond = arg->cond;
+	bool forever = arg->forever;
+	unsigned loop = arg->loop;
+	u8 bjump = arg->bjump;
+
+	if (dry_run)
+		return SZ_DMALPEND;
+
+	buf[0] = CMD_DMALPEND;
+
+	if (loop)
+		buf[0] |= (1 << 2);
+
+	if (!forever)
+		buf[0] |= (1 << 4);
+
+	if (cond == SINGLE)
+		buf[0] |= (0 << 1) | (1 << 0);
+	else if (cond == BURST)
+		buf[0] |= (1 << 1) | (1 << 0);
+
+	buf[1] = bjump;
+
+	PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
+			forever ? "FE" : "END",
+			cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
+			loop ? '1' : '0',
+			bjump);
+
+	return SZ_DMALPEND;
+}
+
+static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMAKILL;
+
+	buf[0] = CMD_DMAKILL;
+
+	return SZ_DMAKILL;
+}
+
+static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
+		enum dmamov_dst dst, u32 val)
+{
+	if (dry_run)
+		return SZ_DMAMOV;
+
+	buf[0] = CMD_DMAMOV;
+	buf[1] = dst;
+	*((u32 *)&buf[2]) = val;
+
+	PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
+		dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
+
+	return SZ_DMAMOV;
+}
+
+static inline u32 _emit_NOP(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMANOP;
+
+	buf[0] = CMD_DMANOP;
+
+	PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n");
+
+	return SZ_DMANOP;
+}
+
+static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMARMB;
+
+	buf[0] = CMD_DMARMB;
+
+	PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
+
+	return SZ_DMARMB;
+}
+
+static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
+{
+	if (dry_run)
+		return SZ_DMASEV;
+
+	buf[0] = CMD_DMASEV;
+
+	ev &= 0x1f;
+	ev <<= 3;
+	buf[1] = ev;
+
+	PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
+
+	return SZ_DMASEV;
+}
+
+static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
+{
+	if (dry_run)
+		return SZ_DMAST;
+
+	buf[0] = CMD_DMAST;
+
+	if (cond == SINGLE)
+		buf[0] |= (0 << 1) | (1 << 0);
+	else if (cond == BURST)
+		buf[0] |= (1 << 1) | (1 << 0);
+
+	PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
+		cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
+
+	return SZ_DMAST;
+}
+
+static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
+		enum pl330_cond cond, u8 peri)
+{
+	if (dry_run)
+		return SZ_DMASTP;
+
+	buf[0] = CMD_DMASTP;
+
+	if (cond == BURST)
+		buf[0] |= (1 << 1);
+
+	peri &= 0x1f;
+	peri <<= 3;
+	buf[1] = peri;
+
+	PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
+		cond == SINGLE ? 'S' : 'B', peri >> 3);
+
+	return SZ_DMASTP;
+}
+
+static inline u32 _emit_STZ(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMASTZ;
+
+	buf[0] = CMD_DMASTZ;
+
+	PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n");
+
+	return SZ_DMASTZ;
+}
+
+static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev,
+		unsigned invalidate)
+{
+	if (dry_run)
+		return SZ_DMAWFE;
+
+	buf[0] = CMD_DMAWFE;
+
+	ev &= 0x1f;
+	ev <<= 3;
+	buf[1] = ev;
+
+	if (invalidate)
+		buf[1] |= (1 << 1);
+
+	PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n",
+		ev >> 3, invalidate ? ", I" : "");
+
+	return SZ_DMAWFE;
+}
+
+static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
+		enum pl330_cond cond, u8 peri)
+{
+	if (dry_run)
+		return SZ_DMAWFP;
+
+	buf[0] = CMD_DMAWFP;
+
+	if (cond == SINGLE)
+		buf[0] |= (0 << 1) | (0 << 0);
+	else if (cond == BURST)
+		buf[0] |= (1 << 1) | (0 << 0);
+	else
+		buf[0] |= (0 << 1) | (1 << 0);
+
+	peri &= 0x1f;
+	peri <<= 3;
+	buf[1] = peri;
+
+	PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
+		cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
+
+	return SZ_DMAWFP;
+}
+
+static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMAWMB;
+
+	buf[0] = CMD_DMAWMB;
+
+	PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
+
+	return SZ_DMAWMB;
+}
+
+struct _arg_GO {
+	u8 chan;
+	u32 addr;
+	unsigned ns;
+};
+
+static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
+		const struct _arg_GO *arg)
+{
+	u8 chan = arg->chan;
+	u32 addr = arg->addr;
+	unsigned ns = arg->ns;
+
+	if (dry_run)
+		return SZ_DMAGO;
+
+	buf[0] = CMD_DMAGO;
+	buf[0] |= (ns << 1);
+
+	buf[1] = chan & 0x7;
+
+	*((u32 *)&buf[2]) = addr;
+
+	return SZ_DMAGO;
+}
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+
+/* Returns Time-Out */
+static bool _until_dmac_idle(struct pl330_thread *thrd)
+{
+	void __iomem *regs = thrd->dmac->pinfo->base;
+	unsigned long loops = msecs_to_loops(5);
+
+	do {
+		/* Until Manager is Idle */
+		if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
+			break;
+
+		cpu_relax();
+	} while (--loops);
+
+	if (!loops)
+		return true;
+
+	return false;
+}
+
+static inline void _execute_DBGINSN(struct pl330_thread *thrd,
+		u8 insn[], bool as_manager)
+{
+	void __iomem *regs = thrd->dmac->pinfo->base;
+	u32 val;
+
+	val = (insn[0] << 16) | (insn[1] << 24);
+	if (!as_manager) {
+		val |= (1 << 0);
+		val |= (thrd->id << 8); /* Channel Number */
+	}
+	writel(val, regs + DBGINST0);
+
+	val = *((u32 *)&insn[2]);
+	writel(val, regs + DBGINST1);
+
+	/* If timed out due to halted state-machine */
+	if (_until_dmac_idle(thrd)) {
+		dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n");
+		return;
+	}
+
+	/* Get going */
+	writel(0, regs + DBGCMD);
+}
+
+/*
+ * Mark a _pl330_req as free.
+ * We do it by writing DMAEND as the first instruction
+ * because no valid request is going to have DMAEND as
+ * its first instruction to execute.
+ */
+static void mark_free(struct pl330_thread *thrd, int idx)
+{
+	struct _pl330_req *req = &thrd->req[idx];
+
+	_emit_END(0, req->mc_cpu);
+	req->mc_len = 0;
+
+	thrd->req_running = -1;
+}
+
+static inline u32 _state(struct pl330_thread *thrd)
+{
+	void __iomem *regs = thrd->dmac->pinfo->base;
+	u32 val;
+
+	if (is_manager(thrd))
+		val = readl(regs + DS) & 0xf;
+	else
+		val = readl(regs + CS(thrd->id)) & 0xf;
+
+	switch (val) {
+	case DS_ST_STOP:
+		return PL330_STATE_STOPPED;
+	case DS_ST_EXEC:
+		return PL330_STATE_EXECUTING;
+	case DS_ST_CMISS:
+		return PL330_STATE_CACHEMISS;
+	case DS_ST_UPDTPC:
+		return PL330_STATE_UPDTPC;
+	case DS_ST_WFE:
+		return PL330_STATE_WFE;
+	case DS_ST_FAULT:
+		return PL330_STATE_FAULTING;
+	case DS_ST_ATBRR:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_ATBARRIER;
+	case DS_ST_QBUSY:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_QUEUEBUSY;
+	case DS_ST_WFP:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_WFP;
+	case DS_ST_KILL:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_KILLING;
+	case DS_ST_CMPLT:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_COMPLETING;
+	case DS_ST_FLTCMP:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_FAULT_COMPLETING;
+	default:
+		return PL330_STATE_INVALID;
+	}
+}
+
+static void _stop(struct pl330_thread *thrd)
+{
+	void __iomem *regs = thrd->dmac->pinfo->base;
+	u8 insn[6] = {0, 0, 0, 0, 0, 0};
+
+	if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
+		UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
+
+	/* Return if nothing needs to be done */
+	if (_state(thrd) == PL330_STATE_COMPLETING
+		  || _state(thrd) == PL330_STATE_KILLING
+		  || _state(thrd) == PL330_STATE_STOPPED)
+		return;
+
+	_emit_KILL(0, insn);
+
+	/* Stop generating interrupts for SEV */
+	writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN);
+
+	_execute_DBGINSN(thrd, insn, is_manager(thrd));
+}
+
+/* Start doing req 'idx' of thread 'thrd' */
+static bool _trigger(struct pl330_thread *thrd)
+{
+	void __iomem *regs = thrd->dmac->pinfo->base;
+	struct _pl330_req *req;
+	struct pl330_req *r;
+	struct _arg_GO go;
+	unsigned ns;
+	u8 insn[6] = {0, 0, 0, 0, 0, 0};
+	int idx;
+
+	/* Return if already ACTIVE */
+	if (_state(thrd) != PL330_STATE_STOPPED)
+		return true;
+
+	idx = 1 - thrd->lstenq;
+	if (!IS_FREE(&thrd->req[idx]))
+		req = &thrd->req[idx];
+	else {
+		idx = thrd->lstenq;
+		if (!IS_FREE(&thrd->req[idx]))
+			req = &thrd->req[idx];
+		else
+			req = NULL;
+	}
+
+	/* Return if no request */
+	if (!req || !req->r)
+		return true;
+
+	r = req->r;
+
+	if (r->cfg)
+		ns = r->cfg->nonsecure ? 1 : 0;
+	else if (readl(regs + CS(thrd->id)) & CS_CNS)
+		ns = 1;
+	else
+		ns = 0;
+
+	/* See 'Abort Sources' point-4 at Page 2-25 */
+	if (_manager_ns(thrd) && !ns)
+		dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n",
+			__func__, __LINE__);
+
+	go.chan = thrd->id;
+	go.addr = req->mc_bus;
+	go.ns = ns;
+	_emit_GO(0, insn, &go);
+
+	/* Set to generate interrupts for SEV */
+	writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
+
+	/* Only manager can execute GO */
+	_execute_DBGINSN(thrd, insn, true);
+
+	thrd->req_running = idx;
+
+	return true;
+}
+
+static bool _start(struct pl330_thread *thrd)
+{
+	switch (_state(thrd)) {
+	case PL330_STATE_FAULT_COMPLETING:
+		UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
+
+		if (_state(thrd) == PL330_STATE_KILLING)
+			UNTIL(thrd, PL330_STATE_STOPPED)
+
+	case PL330_STATE_FAULTING:
+		_stop(thrd);
+
+	case PL330_STATE_KILLING:
+	case PL330_STATE_COMPLETING:
+		UNTIL(thrd, PL330_STATE_STOPPED)
+
+	case PL330_STATE_STOPPED:
+		return _trigger(thrd);
+
+	case PL330_STATE_WFP:
+	case PL330_STATE_QUEUEBUSY:
+	case PL330_STATE_ATBARRIER:
+	case PL330_STATE_UPDTPC:
+	case PL330_STATE_CACHEMISS:
+	case PL330_STATE_EXECUTING:
+		return true;
+
+	case PL330_STATE_WFE: /* For RESUME, nothing yet */
+	default:
+		return false;
+	}
+}
+
+static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs, int cyc)
+{
+	int off = 0;
+
+	while (cyc--) {
+		off += _emit_LD(dry_run, &buf[off], ALWAYS);
+		off += _emit_RMB(dry_run, &buf[off]);
+		off += _emit_ST(dry_run, &buf[off], ALWAYS);
+		off += _emit_WMB(dry_run, &buf[off]);
+	}
+
+	return off;
+}
+
+static inline int _ldst_devtomem(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs, int cyc)
+{
+	int off = 0;
+
+	while (cyc--) {
+		off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+		off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+		off += _emit_ST(dry_run, &buf[off], ALWAYS);
+		off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
+	}
+
+	return off;
+}
+
+static inline int _ldst_memtodev(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs, int cyc)
+{
+	int off = 0;
+
+	while (cyc--) {
+		off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+		off += _emit_LD(dry_run, &buf[off], ALWAYS);
+		off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+		off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
+	}
+
+	return off;
+}
+
+static int _bursts(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs, int cyc)
+{
+	int off = 0;
+
+	switch (pxs->r->rqtype) {
+	case MEMTODEV:
+		off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc);
+		break;
+	case DEVTOMEM:
+		off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc);
+		break;
+	case MEMTOMEM:
+		off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
+		break;
+	default:
+		off += 0x40000000; /* Scare off the Client */
+		break;
+	}
+
+	return off;
+}
+
+/* Returns bytes consumed and updates bursts */
+static inline int _loop(unsigned dry_run, u8 buf[],
+		unsigned long *bursts, const struct _xfer_spec *pxs)
+{
+	int cyc, cycmax, szlp, szlpend, szbrst, off;
+	unsigned lcnt0, lcnt1, ljmp0, ljmp1;
+	struct _arg_LPEND lpend;
+
+	/* Max iterations possible in DMALP is 256 */
+	if (*bursts >= 256*256) {
+		lcnt1 = 256;
+		lcnt0 = 256;
+		cyc = *bursts / lcnt1 / lcnt0;
+	} else if (*bursts > 256) {
+		lcnt1 = 256;
+		lcnt0 = *bursts / lcnt1;
+		cyc = 1;
+	} else {
+		lcnt1 = *bursts;
+		lcnt0 = 0;
+		cyc = 1;
+	}
+
+	szlp = _emit_LP(1, buf, 0, 0);
+	szbrst = _bursts(1, buf, pxs, 1);
+
+	lpend.cond = ALWAYS;
+	lpend.forever = false;
+	lpend.loop = 0;
+	lpend.bjump = 0;
+	szlpend = _emit_LPEND(1, buf, &lpend);
+
+	if (lcnt0) {
+		szlp *= 2;
+		szlpend *= 2;
+	}
+
+	/*
+	 * Max bursts that we can unroll due to limit on the
+	 * size of backward jump that can be encoded in DMALPEND
+	 * which is 8-bits and hence 255
+	 */
+	cycmax = (255 - (szlp + szlpend)) / szbrst;
+
+	cyc = (cycmax < cyc) ? cycmax : cyc;
+
+	off = 0;
+
+	if (lcnt0) {
+		off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
+		ljmp0 = off;
+	}
+
+	off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
+	ljmp1 = off;
+
+	off += _bursts(dry_run, &buf[off], pxs, cyc);
+
+	lpend.cond = ALWAYS;
+	lpend.forever = false;
+	lpend.loop = 1;
+	lpend.bjump = off - ljmp1;
+	off += _emit_LPEND(dry_run, &buf[off], &lpend);
+
+	if (lcnt0) {
+		lpend.cond = ALWAYS;
+		lpend.forever = false;
+		lpend.loop = 0;
+		lpend.bjump = off - ljmp0;
+		off += _emit_LPEND(dry_run, &buf[off], &lpend);
+	}
+
+	*bursts = lcnt1 * cyc;
+	if (lcnt0)
+		*bursts *= lcnt0;
+
+	return off;
+}
+
+static inline int _setup_loops(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs)
+{
+	struct pl330_xfer *x = pxs->x;
+	u32 ccr = pxs->ccr;
+	unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
+	int off = 0;
+
+	while (bursts) {
+		c = bursts;
+		off += _loop(dry_run, &buf[off], &c, pxs);
+		bursts -= c;
+	}
+
+	return off;
+}
+
+static inline int _setup_xfer(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs)
+{
+	struct pl330_xfer *x = pxs->x;
+	int off = 0;
+
+	/* DMAMOV SAR, x->src_addr */
+	off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
+	/* DMAMOV DAR, x->dst_addr */
+	off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
+
+	/* Setup Loop(s) */
+	off += _setup_loops(dry_run, &buf[off], pxs);
+
+	return off;
+}
+
+/*
+ * A req is a sequence of one or more xfer units.
+ * Returns the number of bytes taken to setup the MC for the req.
+ */
+static int _setup_req(unsigned dry_run, struct pl330_thread *thrd,
+		unsigned index, struct _xfer_spec *pxs)
+{
+	struct _pl330_req *req = &thrd->req[index];
+	struct pl330_xfer *x;
+	u8 *buf = req->mc_cpu;
+	int off = 0;
+
+	PL330_DBGMC_START(req->mc_bus);
+
+	/* DMAMOV CCR, ccr */
+	off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
+
+	x = pxs->r->x;
+	do {
+		/* Error if xfer length is not aligned at burst size */
+		if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
+			return -EINVAL;
+
+		pxs->x = x;
+		off += _setup_xfer(dry_run, &buf[off], pxs);
+
+		x = x->next;
+	} while (x);
+
+	/* DMASEV peripheral/event */
+	off += _emit_SEV(dry_run, &buf[off], thrd->ev);
+	/* DMAEND */
+	off += _emit_END(dry_run, &buf[off]);
+
+	return off;
+}
+
+static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
+{
+	u32 ccr = 0;
+
+	if (rqc->src_inc)
+		ccr |= CC_SRCINC;
+
+	if (rqc->dst_inc)
+		ccr |= CC_DSTINC;
+
+	/* We set same protection levels for Src and DST for now */
+	if (rqc->privileged)
+		ccr |= CC_SRCPRI | CC_DSTPRI;
+	if (rqc->nonsecure)
+		ccr |= CC_SRCNS | CC_DSTNS;
+	if (rqc->insnaccess)
+		ccr |= CC_SRCIA | CC_DSTIA;
+
+	ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
+	ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
+
+	ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
+	ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
+
+	ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
+	ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
+
+	ccr |= (rqc->swap << CC_SWAP_SHFT);
+
+	return ccr;
+}
+
+static inline bool _is_valid(u32 ccr)
+{
+	enum pl330_dstcachectrl dcctl;
+	enum pl330_srccachectrl scctl;
+
+	dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK;
+	scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK;
+
+	if (dcctl == DINVALID1 || dcctl == DINVALID2
+			|| scctl == SINVALID1 || scctl == SINVALID2)
+		return false;
+	else
+		return true;
+}
+
+/*
+ * Submit a list of xfers after which the client wants notification.
+ * Client is not notified after each xfer unit, just once after all
+ * xfer units are done or some error occurs.
+ */
+static int pl330_submit_req(void *ch_id, struct pl330_req *r)
+{
+	struct pl330_thread *thrd = ch_id;
+	struct pl330_dmac *pl330;
+	struct pl330_info *pi;
+	struct _xfer_spec xs;
+	unsigned long flags;
+	void __iomem *regs;
+	unsigned idx;
+	u32 ccr;
+	int ret = 0;
+
+	/* No Req or Unacquired Channel or DMAC */
+	if (!r || !thrd || thrd->free)
+		return -EINVAL;
+
+	pl330 = thrd->dmac;
+	pi = pl330->pinfo;
+	regs = pi->base;
+
+	if (pl330->state == DYING
+		|| pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
+		dev_info(thrd->dmac->pinfo->dev, "%s:%d\n",
+			__func__, __LINE__);
+		return -EAGAIN;
+	}
+
+	/* If request for non-existing peripheral */
+	if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) {
+		dev_info(thrd->dmac->pinfo->dev,
+				"%s:%d Invalid peripheral(%u)!\n",
+				__func__, __LINE__, r->peri);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	if (_queue_full(thrd)) {
+		ret = -EAGAIN;
+		goto xfer_exit;
+	}
+
+	/* Prefer Secure Channel */
+	if (!_manager_ns(thrd))
+		r->cfg->nonsecure = 0;
+	else
+		r->cfg->nonsecure = 1;
+
+	/* Use last settings, if not provided */
+	if (r->cfg)
+		ccr = _prepare_ccr(r->cfg);
+	else
+		ccr = readl(regs + CC(thrd->id));
+
+	/* If this req doesn't have valid xfer settings */
+	if (!_is_valid(ccr)) {
+		ret = -EINVAL;
+		dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n",
+			__func__, __LINE__, ccr);
+		goto xfer_exit;
+	}
+
+	idx = IS_FREE(&thrd->req[0]) ? 0 : 1;
+
+	xs.ccr = ccr;
+	xs.r = r;
+
+	/* First dry run to check if req is acceptable */
+	ret = _setup_req(1, thrd, idx, &xs);
+	if (ret < 0)
+		goto xfer_exit;
+
+	if (ret > pi->mcbufsz / 2) {
+		dev_info(thrd->dmac->pinfo->dev,
+			"%s:%d Trying increasing mcbufsz\n",
+				__func__, __LINE__);
+		ret = -ENOMEM;
+		goto xfer_exit;
+	}
+
+	/* Hook the request */
+	thrd->lstenq = idx;
+	thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs);
+	thrd->req[idx].r = r;
+
+	ret = 0;
+
+xfer_exit:
+	spin_unlock_irqrestore(&pl330->lock, flags);
+
+	return ret;
+}
+
+static void pl330_dotask(unsigned long data)
+{
+	struct pl330_dmac *pl330 = (struct pl330_dmac *) data;
+	struct pl330_info *pi = pl330->pinfo;
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	/* The DMAC itself gone nuts */
+	if (pl330->dmac_tbd.reset_dmac) {
+		pl330->state = DYING;
+		/* Reset the manager too */
+		pl330->dmac_tbd.reset_mngr = true;
+		/* Clear the reset flag */
+		pl330->dmac_tbd.reset_dmac = false;
+	}
+
+	if (pl330->dmac_tbd.reset_mngr) {
+		_stop(pl330->manager);
+		/* Reset all channels */
+		pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1;
+		/* Clear the reset flag */
+		pl330->dmac_tbd.reset_mngr = false;
+	}
+
+	for (i = 0; i < pi->pcfg.num_chan; i++) {
+
+		if (pl330->dmac_tbd.reset_chan & (1 << i)) {
+			struct pl330_thread *thrd = &pl330->channels[i];
+			void __iomem *regs = pi->base;
+			enum pl330_op_err err;
+
+			_stop(thrd);
+
+			if (readl(regs + FSC) & (1 << thrd->id))
+				err = PL330_ERR_FAIL;
+			else
+				err = PL330_ERR_ABORT;
+
+			spin_unlock_irqrestore(&pl330->lock, flags);
+
+			_callback(thrd->req[1 - thrd->lstenq].r, err);
+			_callback(thrd->req[thrd->lstenq].r, err);
+
+			spin_lock_irqsave(&pl330->lock, flags);
+
+			thrd->req[0].r = NULL;
+			thrd->req[1].r = NULL;
+			mark_free(thrd, 0);
+			mark_free(thrd, 1);
+
+			/* Clear the reset flag */
+			pl330->dmac_tbd.reset_chan &= ~(1 << i);
+		}
+	}
+
+	spin_unlock_irqrestore(&pl330->lock, flags);
+
+	return;
+}
+
+/* Returns 1 if state was updated, 0 otherwise */
+static int pl330_update(const struct pl330_info *pi)
+{
+	struct _pl330_req *rqdone;
+	struct pl330_dmac *pl330;
+	unsigned long flags;
+	void __iomem *regs;
+	u32 val;
+	int id, ev, ret = 0;
+
+	if (!pi || !pi->pl330_data)
+		return 0;
+
+	regs = pi->base;
+	pl330 = pi->pl330_data;
+
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	val = readl(regs + FSM) & 0x1;
+	if (val)
+		pl330->dmac_tbd.reset_mngr = true;
+	else
+		pl330->dmac_tbd.reset_mngr = false;
+
+	val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1);
+	pl330->dmac_tbd.reset_chan |= val;
+	if (val) {
+		int i = 0;
+		while (i < pi->pcfg.num_chan) {
+			if (val & (1 << i)) {
+				dev_info(pi->dev,
+					"Reset Channel-%d\t CS-%x FTC-%x\n",
+						i, readl(regs + CS(i)),
+						readl(regs + FTC(i)));
+				_stop(&pl330->channels[i]);
+			}
+			i++;
+		}
+	}
+
+	/* Check which event happened i.e, thread notified */
+	val = readl(regs + ES);
+	if (pi->pcfg.num_events < 32
+			&& val & ~((1 << pi->pcfg.num_events) - 1)) {
+		pl330->dmac_tbd.reset_dmac = true;
+		dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__);
+		ret = 1;
+		goto updt_exit;
+	}
+
+	for (ev = 0; ev < pi->pcfg.num_events; ev++) {
+		if (val & (1 << ev)) { /* Event occurred */
+			struct pl330_thread *thrd;
+			u32 inten = readl(regs + INTEN);
+			int active;
+
+			/* Clear the event */
+			if (inten & (1 << ev))
+				writel(1 << ev, regs + INTCLR);
+
+			ret = 1;
+
+			id = pl330->events[ev];
+
+			thrd = &pl330->channels[id];
+
+			active = thrd->req_running;
+			if (active == -1) /* Aborted */
+				continue;
+
+			rqdone = &thrd->req[active];
+			mark_free(thrd, active);
+
+			/* Get going again ASAP */
+			_start(thrd);
+
+			/* For now, just make a list of callbacks to be done */
+			list_add_tail(&rqdone->rqd, &pl330->req_done);
+		}
+	}
+
+	/* Now that we are in no hurry, do the callbacks */
+	while (!list_empty(&pl330->req_done)) {
+		struct pl330_req *r;
+
+		rqdone = container_of(pl330->req_done.next,
+					struct _pl330_req, rqd);
+
+		list_del_init(&rqdone->rqd);
+
+		/* Detach the req */
+		r = rqdone->r;
+		rqdone->r = NULL;
+
+		spin_unlock_irqrestore(&pl330->lock, flags);
+		_callback(r, PL330_ERR_NONE);
+		spin_lock_irqsave(&pl330->lock, flags);
+	}
+
+updt_exit:
+	spin_unlock_irqrestore(&pl330->lock, flags);
+
+	if (pl330->dmac_tbd.reset_dmac
+			|| pl330->dmac_tbd.reset_mngr
+			|| pl330->dmac_tbd.reset_chan) {
+		ret = 1;
+		tasklet_schedule(&pl330->tasks);
+	}
+
+	return ret;
+}
+
+static int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
+{
+	struct pl330_thread *thrd = ch_id;
+	struct pl330_dmac *pl330;
+	unsigned long flags;
+	int ret = 0, active = thrd->req_running;
+
+	if (!thrd || thrd->free || thrd->dmac->state == DYING)
+		return -EINVAL;
+
+	pl330 = thrd->dmac;
+
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	switch (op) {
+	case PL330_OP_FLUSH:
+		/* Make sure the channel is stopped */
+		_stop(thrd);
+
+		thrd->req[0].r = NULL;
+		thrd->req[1].r = NULL;
+		mark_free(thrd, 0);
+		mark_free(thrd, 1);
+		break;
+
+	case PL330_OP_ABORT:
+		/* Make sure the channel is stopped */
+		_stop(thrd);
+
+		/* ABORT is only for the active req */
+		if (active == -1)
+			break;
+
+		thrd->req[active].r = NULL;
+		mark_free(thrd, active);
+
+		/* Start the next */
+	case PL330_OP_START:
+		if ((active == -1) && !_start(thrd))
+			ret = -EIO;
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	spin_unlock_irqrestore(&pl330->lock, flags);
+	return ret;
+}
+
+static int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus)
+{
+	struct pl330_thread *thrd = ch_id;
+	struct pl330_dmac *pl330;
+	struct pl330_info *pi;
+	void __iomem *regs;
+	int active;
+	u32 val;
+
+	if (!pstatus || !thrd || thrd->free)
+		return -EINVAL;
+
+	pl330 = thrd->dmac;
+	pi = pl330->pinfo;
+	regs = pi->base;
+
+	/* The client should remove the DMAC and add again */
+	if (pl330->state == DYING)
+		pstatus->dmac_halted = true;
+	else
+		pstatus->dmac_halted = false;
+
+	val = readl(regs + FSC);
+	if (val & (1 << thrd->id))
+		pstatus->faulting = true;
+	else
+		pstatus->faulting = false;
+
+	active = thrd->req_running;
+
+	if (active == -1) {
+		/* Indicate that the thread is not running */
+		pstatus->top_req = NULL;
+		pstatus->wait_req = NULL;
+	} else {
+		pstatus->top_req = thrd->req[active].r;
+		pstatus->wait_req = !IS_FREE(&thrd->req[1 - active])
+					? thrd->req[1 - active].r : NULL;
+	}
+
+	pstatus->src_addr = readl(regs + SA(thrd->id));
+	pstatus->dst_addr = readl(regs + DA(thrd->id));
+
+	return 0;
+}
+
+/* Reserve an event */
+static inline int _alloc_event(struct pl330_thread *thrd)
+{
+	struct pl330_dmac *pl330 = thrd->dmac;
+	struct pl330_info *pi = pl330->pinfo;
+	int ev;
+
+	for (ev = 0; ev < pi->pcfg.num_events; ev++)
+		if (pl330->events[ev] == -1) {
+			pl330->events[ev] = thrd->id;
+			return ev;
+		}
+
+	return -1;
+}
+
+static bool _chan_ns(const struct pl330_info *pi, int i)
+{
+	return pi->pcfg.irq_ns & (1 << i);
+}
+
+/* Upon success, returns IdentityToken for the
+ * allocated channel, NULL otherwise.
+ */
+static void *pl330_request_channel(const struct pl330_info *pi)
+{
+	struct pl330_thread *thrd = NULL;
+	struct pl330_dmac *pl330;
+	unsigned long flags;
+	int chans, i;
+
+	if (!pi || !pi->pl330_data)
+		return NULL;
+
+	pl330 = pi->pl330_data;
+
+	if (pl330->state == DYING)
+		return NULL;
+
+	chans = pi->pcfg.num_chan;
+
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	for (i = 0; i < chans; i++) {
+		thrd = &pl330->channels[i];
+		if ((thrd->free) && (!_manager_ns(thrd) ||
+					_chan_ns(pi, i))) {
+			thrd->ev = _alloc_event(thrd);
+			if (thrd->ev >= 0) {
+				thrd->free = false;
+				thrd->lstenq = 1;
+				thrd->req[0].r = NULL;
+				mark_free(thrd, 0);
+				thrd->req[1].r = NULL;
+				mark_free(thrd, 1);
+				break;
+			}
+		}
+		thrd = NULL;
+	}
+
+	spin_unlock_irqrestore(&pl330->lock, flags);
+
+	return thrd;
+}
+
+/* Release an event */
+static inline void _free_event(struct pl330_thread *thrd, int ev)
+{
+	struct pl330_dmac *pl330 = thrd->dmac;
+	struct pl330_info *pi = pl330->pinfo;
+
+	/* If the event is valid and was held by the thread */
+	if (ev >= 0 && ev < pi->pcfg.num_events
+			&& pl330->events[ev] == thrd->id)
+		pl330->events[ev] = -1;
+}
+
+static void pl330_release_channel(void *ch_id)
+{
+	struct pl330_thread *thrd = ch_id;
+	struct pl330_dmac *pl330;
+	unsigned long flags;
+
+	if (!thrd || thrd->free)
+		return;
+
+	_stop(thrd);
+
+	_callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT);
+	_callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT);
+
+	pl330 = thrd->dmac;
+
+	spin_lock_irqsave(&pl330->lock, flags);
+	_free_event(thrd, thrd->ev);
+	thrd->free = true;
+	spin_unlock_irqrestore(&pl330->lock, flags);
+}
+
+/* Initialize the structure for PL330 configuration, that can be used
+ * by the client driver the make best use of the DMAC
+ */
+static void read_dmac_config(struct pl330_info *pi)
+{
+	void __iomem *regs = pi->base;
+	u32 val;
+
+	val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
+	val &= CRD_DATA_WIDTH_MASK;
+	pi->pcfg.data_bus_width = 8 * (1 << val);
+
+	val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
+	val &= CRD_DATA_BUFF_MASK;
+	pi->pcfg.data_buf_dep = val + 1;
+
+	val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
+	val &= CR0_NUM_CHANS_MASK;
+	val += 1;
+	pi->pcfg.num_chan = val;
+
+	val = readl(regs + CR0);
+	if (val & CR0_PERIPH_REQ_SET) {
+		val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
+		val += 1;
+		pi->pcfg.num_peri = val;
+		pi->pcfg.peri_ns = readl(regs + CR4);
+	} else {
+		pi->pcfg.num_peri = 0;
+	}
+
+	val = readl(regs + CR0);
+	if (val & CR0_BOOT_MAN_NS)
+		pi->pcfg.mode |= DMAC_MODE_NS;
+	else
+		pi->pcfg.mode &= ~DMAC_MODE_NS;
+
+	val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
+	val &= CR0_NUM_EVENTS_MASK;
+	val += 1;
+	pi->pcfg.num_events = val;
+
+	pi->pcfg.irq_ns = readl(regs + CR3);
+
+	pi->pcfg.periph_id = get_id(pi, PERIPH_ID);
+	pi->pcfg.pcell_id = get_id(pi, PCELL_ID);
+}
+
+static inline void _reset_thread(struct pl330_thread *thrd)
+{
+	struct pl330_dmac *pl330 = thrd->dmac;
+	struct pl330_info *pi = pl330->pinfo;
+
+	thrd->req[0].mc_cpu = pl330->mcode_cpu
+				+ (thrd->id * pi->mcbufsz);
+	thrd->req[0].mc_bus = pl330->mcode_bus
+				+ (thrd->id * pi->mcbufsz);
+	thrd->req[0].r = NULL;
+	mark_free(thrd, 0);
+
+	thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
+				+ pi->mcbufsz / 2;
+	thrd->req[1].mc_bus = thrd->req[0].mc_bus
+				+ pi->mcbufsz / 2;
+	thrd->req[1].r = NULL;
+	mark_free(thrd, 1);
+}
+
+static int dmac_alloc_threads(struct pl330_dmac *pl330)
+{
+	struct pl330_info *pi = pl330->pinfo;
+	int chans = pi->pcfg.num_chan;
+	struct pl330_thread *thrd;
+	int i;
+
+	/* Allocate 1 Manager and 'chans' Channel threads */
+	pl330->channels = kzalloc((1 + chans) * sizeof(*thrd),
+					GFP_KERNEL);
+	if (!pl330->channels)
+		return -ENOMEM;
+
+	/* Init Channel threads */
+	for (i = 0; i < chans; i++) {
+		thrd = &pl330->channels[i];
+		thrd->id = i;
+		thrd->dmac = pl330;
+		_reset_thread(thrd);
+		thrd->free = true;
+	}
+
+	/* MANAGER is indexed at the end */
+	thrd = &pl330->channels[chans];
+	thrd->id = chans;
+	thrd->dmac = pl330;
+	thrd->free = false;
+	pl330->manager = thrd;
+
+	return 0;
+}
+
+static int dmac_alloc_resources(struct pl330_dmac *pl330)
+{
+	struct pl330_info *pi = pl330->pinfo;
+	int chans = pi->pcfg.num_chan;
+	int ret;
+
+	/*
+	 * Alloc MicroCode buffer for 'chans' Channel threads.
+	 * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
+	 */
+	pl330->mcode_cpu = dma_alloc_coherent(pi->dev,
+				chans * pi->mcbufsz,
+				&pl330->mcode_bus, GFP_KERNEL);
+	if (!pl330->mcode_cpu) {
+		dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
+			__func__, __LINE__);
+		return -ENOMEM;
+	}
+
+	ret = dmac_alloc_threads(pl330);
+	if (ret) {
+		dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n",
+			__func__, __LINE__);
+		dma_free_coherent(pi->dev,
+				chans * pi->mcbufsz,
+				pl330->mcode_cpu, pl330->mcode_bus);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int pl330_add(struct pl330_info *pi)
+{
+	struct pl330_dmac *pl330;
+	void __iomem *regs;
+	int i, ret;
+
+	if (!pi || !pi->dev)
+		return -EINVAL;
+
+	/* If already added */
+	if (pi->pl330_data)
+		return -EINVAL;
+
+	/*
+	 * If the SoC can perform reset on the DMAC, then do it
+	 * before reading its configuration.
+	 */
+	if (pi->dmac_reset)
+		pi->dmac_reset(pi);
+
+	regs = pi->base;
+
+	/* Check if we can handle this DMAC */
+	if ((get_id(pi, PERIPH_ID) & 0xfffff) != PERIPH_ID_VAL
+	   || get_id(pi, PCELL_ID) != PCELL_ID_VAL) {
+		dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n",
+			get_id(pi, PERIPH_ID), get_id(pi, PCELL_ID));
+		return -EINVAL;
+	}
+
+	/* Read the configuration of the DMAC */
+	read_dmac_config(pi);
+
+	if (pi->pcfg.num_events == 0) {
+		dev_err(pi->dev, "%s:%d Can't work without events!\n",
+			__func__, __LINE__);
+		return -EINVAL;
+	}
+
+	pl330 = kzalloc(sizeof(*pl330), GFP_KERNEL);
+	if (!pl330) {
+		dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
+			__func__, __LINE__);
+		return -ENOMEM;
+	}
+
+	/* Assign the info structure and private data */
+	pl330->pinfo = pi;
+	pi->pl330_data = pl330;
+
+	spin_lock_init(&pl330->lock);
+
+	INIT_LIST_HEAD(&pl330->req_done);
+
+	/* Use default MC buffer size if not provided */
+	if (!pi->mcbufsz)
+		pi->mcbufsz = MCODE_BUFF_PER_REQ * 2;
+
+	/* Mark all events as free */
+	for (i = 0; i < pi->pcfg.num_events; i++)
+		pl330->events[i] = -1;
+
+	/* Allocate resources needed by the DMAC */
+	ret = dmac_alloc_resources(pl330);
+	if (ret) {
+		dev_err(pi->dev, "Unable to create channels for DMAC\n");
+		kfree(pl330);
+		return ret;
+	}
+
+	tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330);
+
+	pl330->state = INIT;
+
+	return 0;
+}
+
+static int dmac_free_threads(struct pl330_dmac *pl330)
+{
+	struct pl330_info *pi = pl330->pinfo;
+	int chans = pi->pcfg.num_chan;
+	struct pl330_thread *thrd;
+	int i;
+
+	/* Release Channel threads */
+	for (i = 0; i < chans; i++) {
+		thrd = &pl330->channels[i];
+		pl330_release_channel((void *)thrd);
+	}
+
+	/* Free memory */
+	kfree(pl330->channels);
+
+	return 0;
+}
+
+static void dmac_free_resources(struct pl330_dmac *pl330)
+{
+	struct pl330_info *pi = pl330->pinfo;
+	int chans = pi->pcfg.num_chan;
+
+	dmac_free_threads(pl330);
+
+	dma_free_coherent(pi->dev, chans * pi->mcbufsz,
+				pl330->mcode_cpu, pl330->mcode_bus);
+}
+
+static void pl330_del(struct pl330_info *pi)
+{
+	struct pl330_dmac *pl330;
+
+	if (!pi || !pi->pl330_data)
+		return;
+
+	pl330 = pi->pl330_data;
+
+	pl330->state = UNINIT;
+
+	tasklet_kill(&pl330->tasks);
+
+	/* Free DMAC resources */
+	dmac_free_resources(pl330);
+
+	kfree(pl330);
+	pi->pl330_data = NULL;
+}
+
 /* forward declaration */
 static struct amba_driver pl330_driver;