diff options
author | Doug Thompson <dougthompson@xmission.com> | 2009-04-27 14:16:50 (GMT) |
---|---|---|
committer | Borislav Petkov <borislav.petkov@amd.com> | 2009-06-10 10:18:55 (GMT) |
commit | 1afd3c98b5e8df68e1840b56c0ced15f314ce30d (patch) | |
tree | 4ddaa116db045cb3670f8ff6beda9f84480dc303 /drivers/edac | |
parent | ddff876d2022c5e06509f6535bc4fd61c4d6ffd6 (diff) | |
download | linux-1afd3c98b5e8df68e1840b56c0ced15f314ce30d.tar.xz |
amd64_edac: add F10h-and-later methods-p1
Borislav:
Fail f10_early_channel_count() if error encountered while reading a NB
register since those cached register contents are accessed afterwards.
- fix/cleanup comments
- fix function return value patterns
- cleanup debug calls
Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Diffstat (limited to 'drivers/edac')
-rw-r--r-- | drivers/edac/amd64_edac.c | 181 |
1 files changed, 181 insertions, 0 deletions
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 24c031f..b4ef2c7 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -1185,4 +1185,185 @@ static int k8_dbam_map_to_pages(struct amd64_pvt *pvt, int dram_map) return nr_pages; } +/* + * Get the number of DCT channels in use. + * + * Return: + * number of Memory Channels in operation + * Pass back: + * contents of the DCL0_LOW register + */ +static int f10_early_channel_count(struct amd64_pvt *pvt) +{ + int err = 0, channels = 0; + u32 dbam; + + err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_0, &pvt->dclr0); + if (err) + goto err_reg; + + err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_1, &pvt->dclr1); + if (err) + goto err_reg; + + /* If we are in 128 bit mode, then we are using 2 channels */ + if (pvt->dclr0 & F10_WIDTH_128) { + debugf0("Data WIDTH is 128 bits - 2 channels\n"); + channels = 2; + return channels; + } + + /* + * Need to check if in UN-ganged mode: In such, there are 2 channels, + * but they are NOT in 128 bit mode and thus the above 'dcl0' status bit + * will be OFF. + * + * Need to check DCT0[0] and DCT1[0] to see if only one of them has + * their CSEnable bit on. If so, then SINGLE DIMM case. + */ + debugf0("Data WIDTH is NOT 128 bits - need more decoding\n"); + /* + * Check DRAM Bank Address Mapping values for each DIMM to see if there + * is more than just one DIMM present in unganged mode. Need to check + * both controllers since DIMMs can be placed in either one. + */ + channels = 0; + err = pci_read_config_dword(pvt->dram_f2_ctl, DBAM0, &dbam); + if (err) + goto err_reg; + + if (DBAM_DIMM(0, dbam) > 0) + channels++; + if (DBAM_DIMM(1, dbam) > 0) + channels++; + if (DBAM_DIMM(2, dbam) > 0) + channels++; + if (DBAM_DIMM(3, dbam) > 0) + channels++; + + /* If more than 2 DIMMs are present, then we have 2 channels */ + if (channels > 2) + channels = 2; + else if (channels == 0) { + /* No DIMMs on DCT0, so look at DCT1 */ + err = pci_read_config_dword(pvt->dram_f2_ctl, DBAM1, &dbam); + if (err) + goto err_reg; + + if (DBAM_DIMM(0, dbam) > 0) + channels++; + if (DBAM_DIMM(1, dbam) > 0) + channels++; + if (DBAM_DIMM(2, dbam) > 0) + channels++; + if (DBAM_DIMM(3, dbam) > 0) + channels++; + + if (channels > 2) + channels = 2; + } + + /* If we found ALL 0 values, then assume just ONE DIMM-ONE Channel */ + if (channels == 0) + channels = 1; + + debugf0("DIMM count= %d\n", channels); + + return channels; + +err_reg: + return -1; + +} + +static int f10_dbam_map_to_pages(struct amd64_pvt *pvt, int dram_map) +{ + return 1 << (revf_quad_ddr2_shift[dram_map] - PAGE_SHIFT); +} + +/* Enable extended configuration access via 0xCF8 feature */ +static void amd64_setup(struct amd64_pvt *pvt) +{ + u32 reg; + + pci_read_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, ®); + + pvt->flags.cf8_extcfg = !!(reg & F10_NB_CFG_LOW_ENABLE_EXT_CFG); + reg |= F10_NB_CFG_LOW_ENABLE_EXT_CFG; + pci_write_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, reg); +} + +/* Restore the extended configuration access via 0xCF8 feature */ +static void amd64_teardown(struct amd64_pvt *pvt) +{ + u32 reg; + + pci_read_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, ®); + + reg &= ~F10_NB_CFG_LOW_ENABLE_EXT_CFG; + if (pvt->flags.cf8_extcfg) + reg |= F10_NB_CFG_LOW_ENABLE_EXT_CFG; + pci_write_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, reg); +} + +static u64 f10_get_error_address(struct mem_ctl_info *mci, + struct amd64_error_info_regs *info) +{ + return (((u64) (info->nbeah & 0xffff)) << 32) + + (info->nbeal & ~0x01); +} + +/* + * Read the Base and Limit registers for F10 based Memory controllers. Extract + * fields from the 'raw' reg into separate data fields. + * + * Isolates: BASE, LIMIT, IntlvEn, IntlvSel, RW_EN. + */ +static void f10_read_dram_base_limit(struct amd64_pvt *pvt, int dram) +{ + u32 high_offset, low_offset, high_base, low_base, high_limit, low_limit; + + low_offset = K8_DRAM_BASE_LOW + (dram << 3); + high_offset = F10_DRAM_BASE_HIGH + (dram << 3); + + /* read the 'raw' DRAM BASE Address register */ + pci_read_config_dword(pvt->addr_f1_ctl, low_offset, &low_base); + + /* Read from the ECS data register */ + pci_read_config_dword(pvt->addr_f1_ctl, high_offset, &high_base); + + /* Extract parts into separate data entries */ + pvt->dram_rw_en[dram] = (low_base & 0x3); + + if (pvt->dram_rw_en[dram] == 0) + return; + + pvt->dram_IntlvEn[dram] = (low_base >> 8) & 0x7; + + pvt->dram_base[dram] = (((((u64) high_base & 0x000000FF) << 32) | + ((u64) low_base & 0xFFFF0000))) << 8; + + low_offset = K8_DRAM_LIMIT_LOW + (dram << 3); + high_offset = F10_DRAM_LIMIT_HIGH + (dram << 3); + + /* read the 'raw' LIMIT registers */ + pci_read_config_dword(pvt->addr_f1_ctl, low_offset, &low_limit); + + /* Read from the ECS data register for the HIGH portion */ + pci_read_config_dword(pvt->addr_f1_ctl, high_offset, &high_limit); + + debugf0(" HW Regs: BASE=0x%08x-%08x LIMIT= 0x%08x-%08x\n", + high_base, low_base, high_limit, low_limit); + + pvt->dram_DstNode[dram] = (low_limit & 0x7); + pvt->dram_IntlvSel[dram] = (low_limit >> 8) & 0x7; + + /* + * Extract address values and form a LIMIT address. Limit is the HIGHEST + * memory location of the region, so low 24 bits need to be all ones. + */ + low_limit |= 0x0000FFFF; + pvt->dram_limit[dram] = + ((((u64) high_limit << 32) + (u64) low_limit) << 8) | (0xFF); +} |