diff options
author | Kevin Hilman <khilman@ti.com> | 2011-05-20 09:53:37 (GMT) |
---|---|---|
committer | Kevin Hilman <khilman@ti.com> | 2011-05-27 15:43:34 (GMT) |
commit | e5cdb13ff95e1400bc94d3e6610fc5e95be3b5b1 (patch) | |
tree | 0421e5fc4819966c366fd68a6cdfc5f89422c430 /drivers/gpio/gpio-omap.c | |
parent | 5ee1a81b84ee8b0bd0b4f8cdbac48b472863c1f2 (diff) | |
download | linux-e5cdb13ff95e1400bc94d3e6610fc5e95be3b5b1.tar.xz |
GPIO: OMAP: move to drivers/gpio
Move OMAP GPIO driver to drivers/gpio. Builds whenever
CONFIG_ARCH_OMAP=y.
Signed-off-by: Kevin Hilman <khilman@ti.com>
Diffstat (limited to 'drivers/gpio/gpio-omap.c')
-rw-r--r-- | drivers/gpio/gpio-omap.c | 2007 |
1 files changed, 2007 insertions, 0 deletions
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c new file mode 100644 index 0000000..6c51191 --- /dev/null +++ b/drivers/gpio/gpio-omap.c @@ -0,0 +1,2007 @@ +/* + * Support functions for OMAP GPIO + * + * Copyright (C) 2003-2005 Nokia Corporation + * Written by Juha Yrjölä <juha.yrjola@nokia.com> + * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/syscore_ops.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/pm_runtime.h> + +#include <mach/hardware.h> +#include <asm/irq.h> +#include <mach/irqs.h> +#include <mach/gpio.h> +#include <asm/mach/irq.h> + +struct gpio_bank { + unsigned long pbase; + void __iomem *base; + u16 irq; + u16 virtual_irq_start; + int method; +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) + u32 suspend_wakeup; + u32 saved_wakeup; +#endif + u32 non_wakeup_gpios; + u32 enabled_non_wakeup_gpios; + + u32 saved_datain; + u32 saved_fallingdetect; + u32 saved_risingdetect; + u32 level_mask; + u32 toggle_mask; + spinlock_t lock; + struct gpio_chip chip; + struct clk *dbck; + u32 mod_usage; + u32 dbck_enable_mask; + struct device *dev; + bool dbck_flag; + int stride; +}; + +#ifdef CONFIG_ARCH_OMAP3 +struct omap3_gpio_regs { + u32 irqenable1; + u32 irqenable2; + u32 wake_en; + u32 ctrl; + u32 oe; + u32 leveldetect0; + u32 leveldetect1; + u32 risingdetect; + u32 fallingdetect; + u32 dataout; +}; + +static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS]; +#endif + +/* + * TODO: Cleanup gpio_bank usage as it is having information + * related to all instances of the device + */ +static struct gpio_bank *gpio_bank; + +static int bank_width; + +/* TODO: Analyze removing gpio_bank_count usage from driver code */ +int gpio_bank_count; + +static inline struct gpio_bank *get_gpio_bank(int gpio) +{ + if (cpu_is_omap15xx()) { + if (OMAP_GPIO_IS_MPUIO(gpio)) + return &gpio_bank[0]; + return &gpio_bank[1]; + } + if (cpu_is_omap16xx()) { + if (OMAP_GPIO_IS_MPUIO(gpio)) + return &gpio_bank[0]; + return &gpio_bank[1 + (gpio >> 4)]; + } + if (cpu_is_omap7xx()) { + if (OMAP_GPIO_IS_MPUIO(gpio)) + return &gpio_bank[0]; + return &gpio_bank[1 + (gpio >> 5)]; + } + if (cpu_is_omap24xx()) + return &gpio_bank[gpio >> 5]; + if (cpu_is_omap34xx() || cpu_is_omap44xx()) + return &gpio_bank[gpio >> 5]; + BUG(); + return NULL; +} + +static inline int get_gpio_index(int gpio) +{ + if (cpu_is_omap7xx()) + return gpio & 0x1f; + if (cpu_is_omap24xx()) + return gpio & 0x1f; + if (cpu_is_omap34xx() || cpu_is_omap44xx()) + return gpio & 0x1f; + return gpio & 0x0f; +} + +static inline int gpio_valid(int gpio) +{ + if (gpio < 0) + return -1; + if (cpu_class_is_omap1() && OMAP_GPIO_IS_MPUIO(gpio)) { + if (gpio >= OMAP_MAX_GPIO_LINES + 16) + return -1; + return 0; + } + if (cpu_is_omap15xx() && gpio < 16) + return 0; + if ((cpu_is_omap16xx()) && gpio < 64) + return 0; + if (cpu_is_omap7xx() && gpio < 192) + return 0; + if (cpu_is_omap2420() && gpio < 128) + return 0; + if (cpu_is_omap2430() && gpio < 160) + return 0; + if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192) + return 0; + return -1; +} + +static int check_gpio(int gpio) +{ + if (unlikely(gpio_valid(gpio) < 0)) { + printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio); + dump_stack(); + return -1; + } + return 0; +} + +static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) +{ + void __iomem *reg = bank->base; + u32 l; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP1 + case METHOD_MPUIO: + reg += OMAP_MPUIO_IO_CNTL / bank->stride; + break; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_DIR_CONTROL; + break; +#endif +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + reg += OMAP1610_GPIO_DIRECTION; + break; +#endif +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DIR_CONTROL; + break; +#endif +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_OE; + break; +#endif +#if defined(CONFIG_ARCH_OMAP4) + case METHOD_GPIO_44XX: + reg += OMAP4_GPIO_OE; + break; +#endif + default: + WARN_ON(1); + return; + } + l = __raw_readl(reg); + if (is_input) + l |= 1 << gpio; + else + l &= ~(1 << gpio); + __raw_writel(l, reg); +} + +static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) +{ + void __iomem *reg = bank->base; + u32 l = 0; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP1 + case METHOD_MPUIO: + reg += OMAP_MPUIO_OUTPUT / bank->stride; + l = __raw_readl(reg); + if (enable) + l |= 1 << gpio; + else + l &= ~(1 << gpio); + break; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_DATA_OUTPUT; + l = __raw_readl(reg); + if (enable) + l |= 1 << gpio; + else + l &= ~(1 << gpio); + break; +#endif +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + if (enable) + reg += OMAP1610_GPIO_SET_DATAOUT; + else + reg += OMAP1610_GPIO_CLEAR_DATAOUT; + l = 1 << gpio; + break; +#endif +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DATA_OUTPUT; + l = __raw_readl(reg); + if (enable) + l |= 1 << gpio; + else + l &= ~(1 << gpio); + break; +#endif +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + case METHOD_GPIO_24XX: + if (enable) + reg += OMAP24XX_GPIO_SETDATAOUT; + else + reg += OMAP24XX_GPIO_CLEARDATAOUT; + l = 1 << gpio; + break; +#endif +#ifdef CONFIG_ARCH_OMAP4 + case METHOD_GPIO_44XX: + if (enable) + reg += OMAP4_GPIO_SETDATAOUT; + else + reg += OMAP4_GPIO_CLEARDATAOUT; + l = 1 << gpio; + break; +#endif + default: + WARN_ON(1); + return; + } + __raw_writel(l, reg); +} + +static int _get_gpio_datain(struct gpio_bank *bank, int gpio) +{ + void __iomem *reg; + + if (check_gpio(gpio) < 0) + return -EINVAL; + reg = bank->base; + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP1 + case METHOD_MPUIO: + reg += OMAP_MPUIO_INPUT_LATCH / bank->stride; + break; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_DATA_INPUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + reg += OMAP1610_GPIO_DATAIN; + break; +#endif +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DATA_INPUT; + break; +#endif +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_DATAIN; + break; +#endif +#ifdef CONFIG_ARCH_OMAP4 + case METHOD_GPIO_44XX: + reg += OMAP4_GPIO_DATAIN; + break; +#endif + default: + return -EINVAL; + } + return (__raw_readl(reg) + & (1 << get_gpio_index(gpio))) != 0; +} + +static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) +{ + void __iomem *reg; + + if (check_gpio(gpio) < 0) + return -EINVAL; + reg = bank->base; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP1 + case METHOD_MPUIO: + reg += OMAP_MPUIO_OUTPUT / bank->stride; + break; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_DATA_OUTPUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + reg += OMAP1610_GPIO_DATAOUT; + break; +#endif +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DATA_OUTPUT; + break; +#endif +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_DATAOUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP4 + case METHOD_GPIO_44XX: + reg += OMAP4_GPIO_DATAOUT; + break; +#endif + default: + return -EINVAL; + } + + return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0; +} + +#define MOD_REG_BIT(reg, bit_mask, set) \ +do { \ + int l = __raw_readl(base + reg); \ + if (set) l |= bit_mask; \ + else l &= ~bit_mask; \ + __raw_writel(l, base + reg); \ +} while(0) + +/** + * _set_gpio_debounce - low level gpio debounce time + * @bank: the gpio bank we're acting upon + * @gpio: the gpio number on this @gpio + * @debounce: debounce time to use + * + * OMAP's debounce time is in 31us steps so we need + * to convert and round up to the closest unit. + */ +static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, + unsigned debounce) +{ + void __iomem *reg = bank->base; + u32 val; + u32 l; + + if (!bank->dbck_flag) + return; + + if (debounce < 32) + debounce = 0x01; + else if (debounce > 7936) + debounce = 0xff; + else + debounce = (debounce / 0x1f) - 1; + + l = 1 << get_gpio_index(gpio); + + if (bank->method == METHOD_GPIO_44XX) + reg += OMAP4_GPIO_DEBOUNCINGTIME; + else + reg += OMAP24XX_GPIO_DEBOUNCE_VAL; + + __raw_writel(debounce, reg); + + reg = bank->base; + if (bank->method == METHOD_GPIO_44XX) + reg += OMAP4_GPIO_DEBOUNCENABLE; + else + reg += OMAP24XX_GPIO_DEBOUNCE_EN; + + val = __raw_readl(reg); + + if (debounce) { + val |= l; + clk_enable(bank->dbck); + } else { + val &= ~l; + clk_disable(bank->dbck); + } + bank->dbck_enable_mask = val; + + __raw_writel(val, reg); +} + +#ifdef CONFIG_ARCH_OMAP2PLUS +static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, + int trigger) +{ + void __iomem *base = bank->base; + u32 gpio_bit = 1 << gpio; + u32 val; + + if (cpu_is_omap44xx()) { + MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit, + trigger & IRQ_TYPE_LEVEL_LOW); + MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit, + trigger & IRQ_TYPE_LEVEL_HIGH); + MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_RISING); + MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_FALLING); + } else { + MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, + trigger & IRQ_TYPE_LEVEL_LOW); + MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, + trigger & IRQ_TYPE_LEVEL_HIGH); + MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_RISING); + MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_FALLING); + } + if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { + if (cpu_is_omap44xx()) { + if (trigger != 0) + __raw_writel(1 << gpio, bank->base+ + OMAP4_GPIO_IRQWAKEN0); + else { + val = __raw_readl(bank->base + + OMAP4_GPIO_IRQWAKEN0); + __raw_writel(val & (~(1 << gpio)), bank->base + + OMAP4_GPIO_IRQWAKEN0); + } + } else { + /* + * GPIO wakeup request can only be generated on edge + * transitions + */ + if (trigger & IRQ_TYPE_EDGE_BOTH) + __raw_writel(1 << gpio, bank->base + + OMAP24XX_GPIO_SETWKUENA); + else + __raw_writel(1 << gpio, bank->base + + OMAP24XX_GPIO_CLEARWKUENA); + } + } + /* This part needs to be executed always for OMAP34xx */ + if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) { + /* + * Log the edge gpio and manually trigger the IRQ + * after resume if the input level changes + * to avoid irq lost during PER RET/OFF mode + * Applies for omap2 non-wakeup gpio and all omap3 gpios + */ + if (trigger & IRQ_TYPE_EDGE_BOTH) + bank->enabled_non_wakeup_gpios |= gpio_bit; + else + bank->enabled_non_wakeup_gpios &= ~gpio_bit; + } + + if (cpu_is_omap44xx()) { + bank->level_mask = + __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) | + __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1); + } else { + bank->level_mask = + __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) | + __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); + } +} +#endif + +#ifdef CONFIG_ARCH_OMAP1 +/* + * This only applies to chips that can't do both rising and falling edge + * detection at once. For all other chips, this function is a noop. + */ +static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) +{ + void __iomem *reg = bank->base; + u32 l = 0; + + switch (bank->method) { + case METHOD_MPUIO: + reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride; + break; +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_INT_CONTROL; + break; +#endif +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_CONTROL; + break; +#endif + default: + return; + } + + l = __raw_readl(reg); + if ((l >> gpio) & 1) + l &= ~(1 << gpio); + else + l |= 1 << gpio; + + __raw_writel(l, reg); +} +#endif + +static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) +{ + void __iomem *reg = bank->base; + u32 l = 0; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP1 + case METHOD_MPUIO: + reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride; + l = __raw_readl(reg); + if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) + bank->toggle_mask |= 1 << gpio; + if (trigger & IRQ_TYPE_EDGE_RISING) + l |= 1 << gpio; + else if (trigger & IRQ_TYPE_EDGE_FALLING) + l &= ~(1 << gpio); + else + goto bad; + break; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_INT_CONTROL; + l = __raw_readl(reg); + if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) + bank->toggle_mask |= 1 << gpio; + if (trigger & IRQ_TYPE_EDGE_RISING) + l |= 1 << gpio; + else if (trigger & IRQ_TYPE_EDGE_FALLING) + l &= ~(1 << gpio); + else + goto bad; + break; +#endif +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + if (gpio & 0x08) + reg += OMAP1610_GPIO_EDGE_CTRL2; + else + reg += OMAP1610_GPIO_EDGE_CTRL1; + gpio &= 0x07; + l = __raw_readl(reg); + l &= ~(3 << (gpio << 1)); + if (trigger & IRQ_TYPE_EDGE_RISING) + l |= 2 << (gpio << 1); + if (trigger & IRQ_TYPE_EDGE_FALLING) + l |= 1 << (gpio << 1); + if (trigger) + /* Enable wake-up during idle for dynamic tick */ + __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_SET_WAKEUPENA); + else + __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA); + break; +#endif +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_CONTROL; + l = __raw_readl(reg); + if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) + bank->toggle_mask |= 1 << gpio; + if (trigger & IRQ_TYPE_EDGE_RISING) + l |= 1 << gpio; + else if (trigger & IRQ_TYPE_EDGE_FALLING) + l &= ~(1 << gpio); + else + goto bad; + break; +#endif +#ifdef CONFIG_ARCH_OMAP2PLUS + case METHOD_GPIO_24XX: + case METHOD_GPIO_44XX: + set_24xx_gpio_triggering(bank, gpio, trigger); + return 0; +#endif + default: + goto bad; + } + __raw_writel(l, reg); + return 0; +bad: + return -EINVAL; +} + +static int gpio_irq_type(struct irq_data *d, unsigned type) +{ + struct gpio_bank *bank; + unsigned gpio; + int retval; + unsigned long flags; + + if (!cpu_class_is_omap2() && d->irq > IH_MPUIO_BASE) + gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE); + else + gpio = d->irq - IH_GPIO_BASE; + + if (check_gpio(gpio) < 0) + return -EINVAL; + + if (type & ~IRQ_TYPE_SENSE_MASK) + return -EINVAL; + + /* OMAP1 allows only only edge triggering */ + if (!cpu_class_is_omap2() + && (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))) + return -EINVAL; + + bank = irq_data_get_irq_chip_data(d); + spin_lock_irqsave(&bank->lock, flags); + retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type); + spin_unlock_irqrestore(&bank->lock, flags); + + if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) + __irq_set_handler_locked(d->irq, handle_level_irq); + else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) + __irq_set_handler_locked(d->irq, handle_edge_irq); + + return retval; +} + +static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) +{ + void __iomem *reg = bank->base; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP1 + case METHOD_MPUIO: + /* MPUIO irqstatus is reset by reading the status register, + * so do nothing here */ + return; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_INT_STATUS; + break; +#endif +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + reg += OMAP1610_GPIO_IRQSTATUS1; + break; +#endif +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_STATUS; + break; +#endif +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_IRQSTATUS1; + break; +#endif +#if defined(CONFIG_ARCH_OMAP4) + case METHOD_GPIO_44XX: + reg += OMAP4_GPIO_IRQSTATUS0; + break; +#endif + default: + WARN_ON(1); + return; + } + __raw_writel(gpio_mask, reg); + + /* Workaround for clearing DSP GPIO interrupts to allow retention */ + if (cpu_is_omap24xx() || cpu_is_omap34xx()) + reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2; + else if (cpu_is_omap44xx()) + reg = bank->base + OMAP4_GPIO_IRQSTATUS1; + + if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) { + __raw_writel(gpio_mask, reg); + + /* Flush posted write for the irq status to avoid spurious interrupts */ + __raw_readl(reg); + } +} + +static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio) +{ + _clear_gpio_irqbank(bank, 1 << get_gpio_index(gpio)); +} + +static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) +{ + void __iomem *reg = bank->base; + int inv = 0; + u32 l; + u32 mask; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP1 + case METHOD_MPUIO: + reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride; + mask = 0xffff; + inv = 1; + break; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_INT_MASK; + mask = 0xffff; + inv = 1; + break; +#endif +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + reg += OMAP1610_GPIO_IRQENABLE1; + mask = 0xffff; + break; +#endif +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_MASK; + mask = 0xffffffff; + inv = 1; + break; +#endif +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_IRQENABLE1; + mask = 0xffffffff; + break; +#endif +#if defined(CONFIG_ARCH_OMAP4) + case METHOD_GPIO_44XX: + reg += OMAP4_GPIO_IRQSTATUSSET0; + mask = 0xffffffff; + break; +#endif + default: + WARN_ON(1); + return 0; + } + + l = __raw_readl(reg); + if (inv) + l = ~l; + l &= mask; + return l; +} + +static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable) +{ + void __iomem *reg = bank->base; + u32 l; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP1 + case METHOD_MPUIO: + reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride; + l = __raw_readl(reg); + if (enable) + l &= ~(gpio_mask); + else + l |= gpio_mask; + break; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_INT_MASK; + l = __raw_readl(reg); + if (enable) + l &= ~(gpio_mask); + else + l |= gpio_mask; + break; +#endif +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + if (enable) + reg += OMAP1610_GPIO_SET_IRQENABLE1; + else + reg += OMAP1610_GPIO_CLEAR_IRQENABLE1; + l = gpio_mask; + break; +#endif +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_MASK; + l = __raw_readl(reg); + if (enable) + l &= ~(gpio_mask); + else + l |= gpio_mask; + break; +#endif +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + case METHOD_GPIO_24XX: + if (enable) + reg += OMAP24XX_GPIO_SETIRQENABLE1; + else + reg += OMAP24XX_GPIO_CLEARIRQENABLE1; + l = gpio_mask; + break; +#endif +#ifdef CONFIG_ARCH_OMAP4 + case METHOD_GPIO_44XX: + if (enable) + reg += OMAP4_GPIO_IRQSTATUSSET0; + else + reg += OMAP4_GPIO_IRQSTATUSCLR0; + l = gpio_mask; + break; +#endif + default: + WARN_ON(1); + return; + } + __raw_writel(l, reg); +} + +static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable) +{ + _enable_gpio_irqbank(bank, 1 << get_gpio_index(gpio), enable); +} + +/* + * Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register. + * 1510 does not seem to have a wake-up register. If JTAG is connected + * to the target, system will wake up always on GPIO events. While + * system is running all registered GPIO interrupts need to have wake-up + * enabled. When system is suspended, only selected GPIO interrupts need + * to have wake-up enabled. + */ +static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) +{ + unsigned long uninitialized_var(flags); + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_MPUIO: + case METHOD_GPIO_1610: + spin_lock_irqsave(&bank->lock, flags); + if (enable) + bank->suspend_wakeup |= (1 << gpio); + else + bank->suspend_wakeup &= ~(1 << gpio); + spin_unlock_irqrestore(&bank->lock, flags); + return 0; +#endif +#ifdef CONFIG_ARCH_OMAP2PLUS + case METHOD_GPIO_24XX: + case METHOD_GPIO_44XX: + if (bank->non_wakeup_gpios & (1 << gpio)) { + printk(KERN_ERR "Unable to modify wakeup on " + "non-wakeup GPIO%d\n", + (bank - gpio_bank) * 32 + gpio); + return -EINVAL; + } + spin_lock_irqsave(&bank->lock, flags); + if (enable) + bank->suspend_wakeup |= (1 << gpio); + else + bank->suspend_wakeup &= ~(1 << gpio); + spin_unlock_irqrestore(&bank->lock, flags); + return 0; +#endif + default: + printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n", + bank->method); + return -EINVAL; + } +} + +static void _reset_gpio(struct gpio_bank *bank, int gpio) +{ + _set_gpio_direction(bank, get_gpio_index(gpio), 1); + _set_gpio_irqenable(bank, gpio, 0); + _clear_gpio_irqstatus(bank, gpio); + _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); +} + +/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ +static int gpio_wake_enable(struct irq_data *d, unsigned int enable) +{ + unsigned int gpio = d->irq - IH_GPIO_BASE; + struct gpio_bank *bank; + int retval; + + if (check_gpio(gpio) < 0) + return -ENODEV; + bank = irq_data_get_irq_chip_data(d); + retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable); + + return retval; +} + +static int omap_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip); + unsigned long flags; + + spin_lock_irqsave(&bank->lock, flags); + + /* Set trigger to none. You need to enable the desired trigger with + * request_irq() or set_irq_type(). + */ + _set_gpio_triggering(bank, offset, IRQ_TYPE_NONE); + +#ifdef CONFIG_ARCH_OMAP15XX + if (bank->method == METHOD_GPIO_1510) { + void __iomem *reg; + + /* Claim the pin for MPU */ + reg = bank->base + OMAP1510_GPIO_PIN_CONTROL; + __raw_writel(__raw_readl(reg) | (1 << offset), reg); + } +#endif + if (!cpu_class_is_omap1()) { + if (!bank->mod_usage) { + void __iomem *reg = bank->base; + u32 ctrl; + + if (cpu_is_omap24xx() || cpu_is_omap34xx()) + reg += OMAP24XX_GPIO_CTRL; + else if (cpu_is_omap44xx()) + reg += OMAP4_GPIO_CTRL; + ctrl = __raw_readl(reg); + /* Module is enabled, clocks are not gated */ + ctrl &= 0xFFFFFFFE; + __raw_writel(ctrl, reg); + } + bank->mod_usage |= 1 << offset; + } + spin_unlock_irqrestore(&bank->lock, flags); + + return 0; +} + +static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip); + unsigned long flags; + + spin_lock_irqsave(&bank->lock, flags); +#ifdef CONFIG_ARCH_OMAP16XX + if (bank->method == METHOD_GPIO_1610) { + /* Disable wake-up during idle for dynamic tick */ + void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; + __raw_writel(1 << offset, reg); + } +#endif +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + if (bank->method == METHOD_GPIO_24XX) { + /* Disable wake-up during idle for dynamic tick */ + void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA; + __raw_writel(1 << offset, reg); + } +#endif +#ifdef CONFIG_ARCH_OMAP4 + if (bank->method == METHOD_GPIO_44XX) { + /* Disable wake-up during idle for dynamic tick */ + void __iomem *reg = bank->base + OMAP4_GPIO_IRQWAKEN0; + __raw_writel(1 << offset, reg); + } +#endif + if (!cpu_class_is_omap1()) { + bank->mod_usage &= ~(1 << offset); + if (!bank->mod_usage) { + void __iomem *reg = bank->base; + u32 ctrl; + + if (cpu_is_omap24xx() || cpu_is_omap34xx()) + reg += OMAP24XX_GPIO_CTRL; + else if (cpu_is_omap44xx()) + reg += OMAP4_GPIO_CTRL; + ctrl = __raw_readl(reg); + /* Module is disabled, clocks are gated */ + ctrl |= 1; + __raw_writel(ctrl, reg); + } + } + _reset_gpio(bank, bank->chip.base + offset); + spin_unlock_irqrestore(&bank->lock, flags); +} + +/* + * We need to unmask the GPIO bank interrupt as soon as possible to + * avoid missing GPIO interrupts for other lines in the bank. + * Then we need to mask-read-clear-unmask the triggered GPIO lines + * in the bank to avoid missing nested interrupts for a GPIO line. + * If we wait to unmask individual GPIO lines in the bank after the + * line's interrupt handler has been run, we may miss some nested + * interrupts. + */ +static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + void __iomem *isr_reg = NULL; + u32 isr; + unsigned int gpio_irq, gpio_index; + struct gpio_bank *bank; + u32 retrigger = 0; + int unmasked = 0; + struct irq_chip *chip = irq_desc_get_chip(desc); + + chained_irq_enter(chip, desc); + + bank = irq_get_handler_data(irq); +#ifdef CONFIG_ARCH_OMAP1 + if (bank->method == METHOD_MPUIO) + isr_reg = bank->base + + OMAP_MPUIO_GPIO_INT / bank->stride; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + if (bank->method == METHOD_GPIO_1510) + isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS; +#endif +#if defined(CONFIG_ARCH_OMAP16XX) + if (bank->method == METHOD_GPIO_1610) + isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1; +#endif +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + if (bank->method == METHOD_GPIO_7XX) + isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS; +#endif +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + if (bank->method == METHOD_GPIO_24XX) + isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; +#endif +#if defined(CONFIG_ARCH_OMAP4) + if (bank->method == METHOD_GPIO_44XX) + isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0; +#endif + + if (WARN_ON(!isr_reg)) + goto exit; + + while(1) { + u32 isr_saved, level_mask = 0; + u32 enabled; + + enabled = _get_gpio_irqbank_mask(bank); + isr_saved = isr = __raw_readl(isr_reg) & enabled; + + if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO)) + isr &= 0x0000ffff; + + if (cpu_class_is_omap2()) { + level_mask = bank->level_mask & enabled; + } + + /* clear edge sensitive interrupts before handler(s) are + called so that we don't miss any interrupt occurred while + executing them */ + _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 0); + _clear_gpio_irqbank(bank, isr_saved & ~level_mask); + _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 1); + + /* if there is only edge sensitive GPIO pin interrupts + configured, we could unmask GPIO bank interrupt immediately */ + if (!level_mask && !unmasked) { + unmasked = 1; + chained_irq_exit(chip, desc); + } + + isr |= retrigger; + retrigger = 0; + if (!isr) + break; + + gpio_irq = bank->virtual_irq_start; + for (; isr != 0; isr >>= 1, gpio_irq++) { + gpio_index = get_gpio_index(irq_to_gpio(gpio_irq)); + + if (!(isr & 1)) + continue; + +#ifdef CONFIG_ARCH_OMAP1 + /* + * Some chips can't respond to both rising and falling + * at the same time. If this irq was requested with + * both flags, we need to flip the ICR data for the IRQ + * to respond to the IRQ for the opposite direction. + * This will be indicated in the bank toggle_mask. + */ + if (bank->toggle_mask & (1 << gpio_index)) + _toggle_gpio_edge_triggering(bank, gpio_index); +#endif + + generic_handle_irq(gpio_irq); + } + } + /* if bank has any level sensitive GPIO pin interrupt + configured, we must unmask the bank interrupt only after + handler(s) are executed in order to avoid spurious bank + interrupt */ +exit: + if (!unmasked) + chained_irq_exit(chip, desc); +} + +static void gpio_irq_shutdown(struct irq_data *d) +{ + unsigned int gpio = d->irq - IH_GPIO_BASE; + struct gpio_bank *bank = irq_data_get_irq_chip_data(d); + + _reset_gpio(bank, gpio); +} + +static void gpio_ack_irq(struct irq_data *d) +{ + unsigned int gpio = d->irq - IH_GPIO_BASE; + struct gpio_bank *bank = irq_data_get_irq_chip_data(d); + + _clear_gpio_irqstatus(bank, gpio); +} + +static void gpio_mask_irq(struct irq_data *d) +{ + unsigned int gpio = d->irq - IH_GPIO_BASE; + struct gpio_bank *bank = irq_data_get_irq_chip_data(d); + + _set_gpio_irqenable(bank, gpio, 0); + _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); +} + +static void gpio_unmask_irq(struct irq_data *d) +{ + unsigned int gpio = d->irq - IH_GPIO_BASE; + struct gpio_bank *bank = irq_data_get_irq_chip_data(d); + unsigned int irq_mask = 1 << get_gpio_index(gpio); + u32 trigger = irqd_get_trigger_type(d); + + if (trigger) + _set_gpio_triggering(bank, get_gpio_index(gpio), trigger); + + /* For level-triggered GPIOs, the clearing must be done after + * the HW source is cleared, thus after the handler has run */ + if (bank->level_mask & irq_mask) { + _set_gpio_irqenable(bank, gpio, 0); + _clear_gpio_irqstatus(bank, gpio); + } + + _set_gpio_irqenable(bank, gpio, 1); +} + +static struct irq_chip gpio_irq_chip = { + .name = "GPIO", + .irq_shutdown = gpio_irq_shutdown, + .irq_ack = gpio_ack_irq, + .irq_mask = gpio_mask_irq, + .irq_unmask = gpio_unmask_irq, + .irq_set_type = gpio_irq_type, + .irq_set_wake = gpio_wake_enable, +}; + +/*---------------------------------------------------------------------*/ + +#ifdef CONFIG_ARCH_OMAP1 + +/* MPUIO uses the always-on 32k clock */ + +static void mpuio_ack_irq(struct irq_data *d) +{ + /* The ISR is reset automatically, so do nothing here. */ +} + +static void mpuio_mask_irq(struct irq_data *d) +{ + unsigned int gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE); + struct gpio_bank *bank = irq_data_get_irq_chip_data(d); + + _set_gpio_irqenable(bank, gpio, 0); +} + +static void mpuio_unmask_irq(struct irq_data *d) +{ + unsigned int gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE); + struct gpio_bank *bank = irq_data_get_irq_chip_data(d); + + _set_gpio_irqenable(bank, gpio, 1); +} + +static struct irq_chip mpuio_irq_chip = { + .name = "MPUIO", + .irq_ack = mpuio_ack_irq, + .irq_mask = mpuio_mask_irq, + .irq_unmask = mpuio_unmask_irq, + .irq_set_type = gpio_irq_type, +#ifdef CONFIG_ARCH_OMAP16XX + /* REVISIT: assuming only 16xx supports MPUIO wake events */ + .irq_set_wake = gpio_wake_enable, +#endif +}; + + +#define bank_is_mpuio(bank) ((bank)->method == METHOD_MPUIO) + + +#ifdef CONFIG_ARCH_OMAP16XX + +#include <linux/platform_device.h> + +static int omap_mpuio_suspend_noirq(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gpio_bank *bank = platform_get_drvdata(pdev); + void __iomem *mask_reg = bank->base + + OMAP_MPUIO_GPIO_MASKIT / bank->stride; + unsigned long flags; + + spin_lock_irqsave(&bank->lock, flags); + bank->saved_wakeup = __raw_readl(mask_reg); + __raw_writel(0xffff & ~bank->suspend_wakeup, mask_reg); + spin_unlock_irqrestore(&bank->lock, flags); + + return 0; +} + +static int omap_mpuio_resume_noirq(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gpio_bank *bank = platform_get_drvdata(pdev); + void __iomem *mask_reg = bank->base + + OMAP_MPUIO_GPIO_MASKIT / bank->stride; + unsigned long flags; + + spin_lock_irqsave(&bank->lock, flags); + __raw_writel(bank->saved_wakeup, mask_reg); + spin_unlock_irqrestore(&bank->lock, flags); + + return 0; +} + +static const struct dev_pm_ops omap_mpuio_dev_pm_ops = { + .suspend_noirq = omap_mpuio_suspend_noirq, + .resume_noirq = omap_mpuio_resume_noirq, +}; + +/* use platform_driver for this. */ +static struct platform_driver omap_mpuio_driver = { + .driver = { + .name = "mpuio", + .pm = &omap_mpuio_dev_pm_ops, + }, +}; + +static struct platform_device omap_mpuio_device = { + .name = "mpuio", + .id = -1, + .dev = { + .driver = &omap_mpuio_driver.driver, + } + /* could list the /proc/iomem resources */ +}; + +static inline void mpuio_init(void) +{ + struct gpio_bank *bank = get_gpio_bank(OMAP_MPUIO(0)); + platform_set_drvdata(&omap_mpuio_device, bank); + + if (platform_driver_register(&omap_mpuio_driver) == 0) + (void) platform_device_register(&omap_mpuio_device); +} + +#else +static inline void mpuio_init(void) {} +#endif /* 16xx */ + +#else + +extern struct irq_chip mpuio_irq_chip; + +#define bank_is_mpuio(bank) 0 +static inline void mpuio_init(void) {} + +#endif + +/*---------------------------------------------------------------------*/ + +/* REVISIT these are stupid implementations! replace by ones that + * don't switch on METHOD_* and which mostly avoid spinlocks + */ + +static int gpio_input(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_bank *bank; + unsigned long flags; + + bank = container_of(chip, struct gpio_bank, chip); + spin_lock_irqsave(&bank->lock, flags); + _set_gpio_direction(bank, offset, 1); + spin_unlock_irqrestore(&bank->lock, flags); + return 0; +} + +static int gpio_is_input(struct gpio_bank *bank, int mask) +{ + void __iomem *reg = bank->base; + + switch (bank->method) { + case METHOD_MPUIO: + reg += OMAP_MPUIO_IO_CNTL / bank->stride; + break; + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_DIR_CONTROL; + break; + case METHOD_GPIO_1610: + reg += OMAP1610_GPIO_DIRECTION; + break; + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DIR_CONTROL; + break; + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_OE; + break; + case METHOD_GPIO_44XX: + reg += OMAP4_GPIO_OE; + break; + default: + WARN_ONCE(1, "gpio_is_input: incorrect OMAP GPIO method"); + return -EINVAL; + } + return __raw_readl(reg) & mask; +} + +static int gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_bank *bank; + void __iomem *reg; + int gpio; + u32 mask; + + gpio = chip->base + offset; + bank = get_gpio_bank(gpio); + reg = bank->base; + mask = 1 << get_gpio_index(gpio); + + if (gpio_is_input(bank, mask)) + return _get_gpio_datain(bank, gpio); + else + return _get_gpio_dataout(bank, gpio); +} + +static int gpio_output(struct gpio_chip *chip, unsigned offset, int value) +{ + struct gpio_bank *bank; + unsigned long flags; + + bank = container_of(chip, struct gpio_bank, chip); + spin_lock_irqsave(&bank->lock, flags); + _set_gpio_dataout(bank, offset, value); + _set_gpio_direction(bank, offset, 0); + spin_unlock_irqrestore(&bank->lock, flags); + return 0; +} + +static int gpio_debounce(struct gpio_chip *chip, unsigned offset, + unsigned debounce) +{ + struct gpio_bank *bank; + unsigned long flags; + + bank = container_of(chip, struct gpio_bank, chip); + + if (!bank->dbck) { + bank->dbck = clk_get(bank->dev, "dbclk"); + if (IS_ERR(bank->dbck)) + dev_err(bank->dev, "Could not get gpio dbck\n"); + } + + spin_lock_irqsave(&bank->lock, flags); + _set_gpio_debounce(bank, offset, debounce); + spin_unlock_irqrestore(&bank->lock, flags); + + return 0; +} + +static void gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct gpio_bank *bank; + unsigned long flags; + + bank = container_of(chip, struct gpio_bank, chip); + spin_lock_irqsave(&bank->lock, flags); + _set_gpio_dataout(bank, offset, value); + spin_unlock_irqrestore(&bank->lock, flags); +} + +static int gpio_2irq(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_bank *bank; + + bank = container_of(chip, struct gpio_bank, chip); + return bank->virtual_irq_start + offset; +} + +/*---------------------------------------------------------------------*/ + +static void __init omap_gpio_show_rev(struct gpio_bank *bank) +{ + u32 rev; + + if (cpu_is_omap16xx() && !(bank->method != METHOD_MPUIO)) + rev = __raw_readw(bank->base + OMAP1610_GPIO_REVISION); + else if (cpu_is_omap24xx() || cpu_is_omap34xx()) + rev = __raw_readl(bank->base + OMAP24XX_GPIO_REVISION); + else if (cpu_is_omap44xx()) + rev = __raw_readl(bank->base + OMAP4_GPIO_REVISION); + else + return; + + printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n", + (rev >> 4) & 0x0f, rev & 0x0f); +} + +/* This lock class tells lockdep that GPIO irqs are in a different + * category than their parents, so it won't report false recursion. + */ +static struct lock_class_key gpio_lock_class; + +static inline int init_gpio_info(struct platform_device *pdev) +{ + /* TODO: Analyze removing gpio_bank_count usage from driver code */ + gpio_bank = kzalloc(gpio_bank_count * sizeof(struct gpio_bank), + GFP_KERNEL); + if (!gpio_bank) { + dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n"); + return -ENOMEM; + } + return 0; +} + +/* TODO: Cleanup cpu_is_* checks */ +static void omap_gpio_mod_init(struct gpio_bank *bank, int id) +{ + if (cpu_class_is_omap2()) { + if (cpu_is_omap44xx()) { + __raw_writel(0xffffffff, bank->base + + OMAP4_GPIO_IRQSTATUSCLR0); + __raw_writel(0x00000000, bank->base + + OMAP4_GPIO_DEBOUNCENABLE); + /* Initialize interface clk ungated, module enabled */ + __raw_writel(0, bank->base + OMAP4_GPIO_CTRL); + } else if (cpu_is_omap34xx()) { + __raw_writel(0x00000000, bank->base + + OMAP24XX_GPIO_IRQENABLE1); + __raw_writel(0xffffffff, bank->base + + OMAP24XX_GPIO_IRQSTATUS1); + __raw_writel(0x00000000, bank->base + + OMAP24XX_GPIO_DEBOUNCE_EN); + + /* Initialize interface clk ungated, module enabled */ + __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL); + } else if (cpu_is_omap24xx()) { + static const u32 non_wakeup_gpios[] = { + 0xe203ffc0, 0x08700040 + }; + if (id < ARRAY_SIZE(non_wakeup_gpios)) + bank->non_wakeup_gpios = non_wakeup_gpios[id]; + } + } else if (cpu_class_is_omap1()) { + if (bank_is_mpuio(bank)) + __raw_writew(0xffff, bank->base + + OMAP_MPUIO_GPIO_MASKIT / bank->stride); + if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { + __raw_writew(0xffff, bank->base + + OMAP1510_GPIO_INT_MASK); + __raw_writew(0x0000, bank->base + + OMAP1510_GPIO_INT_STATUS); + } + if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) { + __raw_writew(0x0000, bank->base + + OMAP1610_GPIO_IRQENABLE1); + __raw_writew(0xffff, bank->base + + OMAP1610_GPIO_IRQSTATUS1); + __raw_writew(0x0014, bank->base + + OMAP1610_GPIO_SYSCONFIG); + + /* + * Enable system clock for GPIO module. + * The CAM_CLK_CTRL *is* really the right place. + */ + omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, + ULPD_CAM_CLK_CTRL); + } + if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) { + __raw_writel(0xffffffff, bank->base + + OMAP7XX_GPIO_INT_MASK); + __raw_writel(0x00000000, bank->base + + OMAP7XX_GPIO_INT_STATUS); + } + } +} + +static void __init omap_gpio_chip_init(struct gpio_bank *bank) +{ + int j; + static int gpio; + + bank->mod_usage = 0; + /* + * REVISIT eventually switch from OMAP-specific gpio structs + * over to the generic ones + */ + bank->chip.request = omap_gpio_request; + bank->chip.free = omap_gpio_free; + bank->chip.direction_input = gpio_input; + bank->chip.get = gpio_get; + bank->chip.direction_output = gpio_output; + bank->chip.set_debounce = gpio_debounce; + bank->chip.set = gpio_set; + bank->chip.to_irq = gpio_2irq; + if (bank_is_mpuio(bank)) { + bank->chip.label = "mpuio"; +#ifdef CONFIG_ARCH_OMAP16XX + bank->chip.dev = &omap_mpuio_device.dev; +#endif + bank->chip.base = OMAP_MPUIO(0); + } else { + bank->chip.label = "gpio"; + bank->chip.base = gpio; + gpio += bank_width; + } + bank->chip.ngpio = bank_width; + + gpiochip_add(&bank->chip); + + for (j = bank->virtual_irq_start; + j < bank->virtual_irq_start + bank_width; j++) { + irq_set_lockdep_class(j, &gpio_lock_class); + irq_set_chip_data(j, bank); + if (bank_is_mpuio(bank)) + irq_set_chip(j, &mpuio_irq_chip); + else + irq_set_chip(j, &gpio_irq_chip); + irq_set_handler(j, handle_simple_irq); + set_irq_flags(j, IRQF_VALID); + } + irq_set_chained_handler(bank->irq, gpio_irq_handler); + irq_set_handler_data(bank->irq, bank); +} + +static int __devinit omap_gpio_probe(struct platform_device *pdev) +{ + static int gpio_init_done; + struct omap_gpio_platform_data *pdata; + struct resource *res; + int id; + struct gpio_bank *bank; + + if (!pdev->dev.platform_data) + return -EINVAL; + + pdata = pdev->dev.platform_data; + + if (!gpio_init_done) { + int ret; + + ret = init_gpio_info(pdev); + if (ret) + return ret; + } + + id = pdev->id; + bank = &gpio_bank[id]; + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (unlikely(!res)) { + dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n", id); + return -ENODEV; + } + + bank->irq = res->start; + bank->virtual_irq_start = pdata->virtual_irq_start; + bank->method = pdata->bank_type; + bank->dev = &pdev->dev; + bank->dbck_flag = pdata->dbck_flag; + bank->stride = pdata->bank_stride; + bank_width = pdata->bank_width; + + spin_lock_init(&bank->lock); + + /* Static mapping, never released */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!res)) { + dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n", id); + return -ENODEV; + } + + bank->base = ioremap(res->start, resource_size(res)); + if (!bank->base) { + dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n", id); + return -ENOMEM; + } + + pm_runtime_enable(bank->dev); + pm_runtime_get_sync(bank->dev); + + omap_gpio_mod_init(bank, id); + omap_gpio_chip_init(bank); + omap_gpio_show_rev(bank); + + if (!gpio_init_done) + gpio_init_done = 1; + + return 0; +} + +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) +static int omap_gpio_suspend(void) +{ + int i; + + if (!cpu_class_is_omap2() && !cpu_is_omap16xx()) + return 0; + + for (i = 0; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + void __iomem *wake_status; + void __iomem *wake_clear; + void __iomem *wake_set; + unsigned long flags; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE; + wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; + wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; + break; +#endif +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + case METHOD_GPIO_24XX: + wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN; + wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; + wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; + break; +#endif +#ifdef CONFIG_ARCH_OMAP4 + case METHOD_GPIO_44XX: + wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0; + wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0; + wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0; + break; +#endif + default: + continue; + } + + spin_lock_irqsave(&bank->lock, flags); + bank->saved_wakeup = __raw_readl(wake_status); + __raw_writel(0xffffffff, wake_clear); + __raw_writel(bank->suspend_wakeup, wake_set); + spin_unlock_irqrestore(&bank->lock, flags); + } + + return 0; +} + +static void omap_gpio_resume(void) +{ + int i; + + if (!cpu_class_is_omap2() && !cpu_is_omap16xx()) + return; + + for (i = 0; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + void __iomem *wake_clear; + void __iomem *wake_set; + unsigned long flags; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; + wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; + break; +#endif +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + case METHOD_GPIO_24XX: + wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; + wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; + break; +#endif +#ifdef CONFIG_ARCH_OMAP4 + case METHOD_GPIO_44XX: + wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0; + wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0; + break; +#endif + default: + continue; + } + + spin_lock_irqsave(&bank->lock, flags); + __raw_writel(0xffffffff, wake_clear); + __raw_writel(bank->saved_wakeup, wake_set); + spin_unlock_irqrestore(&bank->lock, flags); + } +} + +static struct syscore_ops omap_gpio_syscore_ops = { + .suspend = omap_gpio_suspend, + .resume = omap_gpio_resume, +}; + +#endif + +#ifdef CONFIG_ARCH_OMAP2PLUS + +static int workaround_enabled; + +void omap2_gpio_prepare_for_idle(int off_mode) +{ + int i, c = 0; + int min = 0; + + if (cpu_is_omap34xx()) + min = 1; + + for (i = min; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + u32 l1 = 0, l2 = 0; + int j; + + for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) + clk_disable(bank->dbck); + + if (!off_mode) + continue; + + /* If going to OFF, remove triggering for all + * non-wakeup GPIOs. Otherwise spurious IRQs will be + * generated. See OMAP2420 Errata item 1.101. */ + if (!(bank->enabled_non_wakeup_gpios)) + continue; + + if (cpu_is_omap24xx() || cpu_is_omap34xx()) { + bank->saved_datain = __raw_readl(bank->base + + OMAP24XX_GPIO_DATAIN); + l1 = __raw_readl(bank->base + + OMAP24XX_GPIO_FALLINGDETECT); + l2 = __raw_readl(bank->base + + OMAP24XX_GPIO_RISINGDETECT); + } + + if (cpu_is_omap44xx()) { + bank->saved_datain = __raw_readl(bank->base + + OMAP4_GPIO_DATAIN); + l1 = __raw_readl(bank->base + + OMAP4_GPIO_FALLINGDETECT); + l2 = __raw_readl(bank->base + + OMAP4_GPIO_RISINGDETECT); + } + + bank->saved_fallingdetect = l1; + bank->saved_risingdetect = l2; + l1 &= ~bank->enabled_non_wakeup_gpios; + l2 &= ~bank->enabled_non_wakeup_gpios; + + if (cpu_is_omap24xx() || cpu_is_omap34xx()) { + __raw_writel(l1, bank->base + + OMAP24XX_GPIO_FALLINGDETECT); + __raw_writel(l2, bank->base + + OMAP24XX_GPIO_RISINGDETECT); + } + + if (cpu_is_omap44xx()) { + __raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT); + __raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT); + } + + c++; + } + if (!c) { + workaround_enabled = 0; + return; + } + workaround_enabled = 1; +} + +void omap2_gpio_resume_after_idle(void) +{ + int i; + int min = 0; + + if (cpu_is_omap34xx()) + min = 1; + for (i = min; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + u32 l = 0, gen, gen0, gen1; + int j; + + for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) + clk_enable(bank->dbck); + + if (!workaround_enabled) + continue; + + if (!(bank->enabled_non_wakeup_gpios)) + continue; + + if (cpu_is_omap24xx() || cpu_is_omap34xx()) { + __raw_writel(bank->saved_fallingdetect, + bank->base + OMAP24XX_GPIO_FALLINGDETECT); + __raw_writel(bank->saved_risingdetect, + bank->base + OMAP24XX_GPIO_RISINGDETECT); + l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); + } + + if (cpu_is_omap44xx()) { + __raw_writel(bank->saved_fallingdetect, + bank->base + OMAP4_GPIO_FALLINGDETECT); + __raw_writel(bank->saved_risingdetect, + bank->base + OMAP4_GPIO_RISINGDETECT); + l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN); + } + + /* Check if any of the non-wakeup interrupt GPIOs have changed + * state. If so, generate an IRQ by software. This is + * horribly racy, but it's the best we can do to work around + * this silicon bug. */ + l ^= bank->saved_datain; + l &= bank->enabled_non_wakeup_gpios; + + /* + * No need to generate IRQs for the rising edge for gpio IRQs + * configured with falling edge only; and vice versa. + */ + gen0 = l & bank->saved_fallingdetect; + gen0 &= bank->saved_datain; + + gen1 = l & bank->saved_risingdetect; + gen1 &= ~(bank->saved_datain); + + /* FIXME: Consider GPIO IRQs with level detections properly! */ + gen = l & (~(bank->saved_fallingdetect) & + ~(bank->saved_risingdetect)); + /* Consider all GPIO IRQs needed to be updated */ + gen |= gen0 | gen1; + + if (gen) { + u32 old0, old1; + + if (cpu_is_omap24xx() || cpu_is_omap34xx()) { + old0 = __raw_readl(bank->base + + OMAP24XX_GPIO_LEVELDETECT0); + old1 = __raw_readl(bank->base + + OMAP24XX_GPIO_LEVELDETECT1); + __raw_writel(old0 | gen, bank->base + + OMAP24XX_GPIO_LEVELDETECT0); + __raw_writel(old1 | gen, bank->base + + OMAP24XX_GPIO_LEVELDETECT1); + __raw_writel(old0, bank->base + + OMAP24XX_GPIO_LEVELDETECT0); + __raw_writel(old1, bank->base + + OMAP24XX_GPIO_LEVELDETECT1); + } + + if (cpu_is_omap44xx()) { + old0 = __raw_readl(bank->base + + OMAP4_GPIO_LEVELDETECT0); + old1 = __raw_readl(bank->base + + OMAP4_GPIO_LEVELDETECT1); + __raw_writel(old0 | l, bank->base + + OMAP4_GPIO_LEVELDETECT0); + __raw_writel(old1 | l, bank->base + + OMAP4_GPIO_LEVELDETECT1); + __raw_writel(old0, bank->base + + OMAP4_GPIO_LEVELDETECT0); + __raw_writel(old1, bank->base + + OMAP4_GPIO_LEVELDETECT1); + } + } + } + +} + +#endif + +#ifdef CONFIG_ARCH_OMAP3 +/* save the registers of bank 2-6 */ +void omap_gpio_save_context(void) +{ + int i; + + /* saving banks from 2-6 only since GPIO1 is in WKUP */ + for (i = 1; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + gpio_context[i].irqenable1 = + __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1); + gpio_context[i].irqenable2 = + __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2); + gpio_context[i].wake_en = + __raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN); + gpio_context[i].ctrl = + __raw_readl(bank->base + OMAP24XX_GPIO_CTRL); + gpio_context[i].oe = + __raw_readl(bank->base + OMAP24XX_GPIO_OE); + gpio_context[i].leveldetect0 = + __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0); + gpio_context[i].leveldetect1 = + __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); + gpio_context[i].risingdetect = + __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT); + gpio_context[i].fallingdetect = + __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT); + gpio_context[i].dataout = + __raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT); + } +} + +/* restore the required registers of bank 2-6 */ +void omap_gpio_restore_context(void) +{ + int i; + + for (i = 1; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + __raw_writel(gpio_context[i].irqenable1, + bank->base + OMAP24XX_GPIO_IRQENABLE1); + __raw_writel(gpio_context[i].irqenable2, + bank->base + OMAP24XX_GPIO_IRQENABLE2); + __raw_writel(gpio_context[i].wake_en, + bank->base + OMAP24XX_GPIO_WAKE_EN); + __raw_writel(gpio_context[i].ctrl, + bank->base + OMAP24XX_GPIO_CTRL); + __raw_writel(gpio_context[i].oe, + bank->base + OMAP24XX_GPIO_OE); + __raw_writel(gpio_context[i].leveldetect0, + bank->base + OMAP24XX_GPIO_LEVELDETECT0); + __raw_writel(gpio_context[i].leveldetect1, + bank->base + OMAP24XX_GPIO_LEVELDETECT1); + __raw_writel(gpio_context[i].risingdetect, + bank->base + OMAP24XX_GPIO_RISINGDETECT); + __raw_writel(gpio_context[i].fallingdetect, + bank->base + OMAP24XX_GPIO_FALLINGDETECT); + __raw_writel(gpio_context[i].dataout, + bank->base + OMAP24XX_GPIO_DATAOUT); + } +} +#endif + +static struct platform_driver omap_gpio_driver = { + .probe = omap_gpio_probe, + .driver = { + .name = "omap_gpio", + }, +}; + +/* + * gpio driver register needs to be done before + * machine_init functions access gpio APIs. + * Hence omap_gpio_drv_reg() is a postcore_initcall. + */ +static int __init omap_gpio_drv_reg(void) +{ + return platform_driver_register(&omap_gpio_driver); +} +postcore_initcall(omap_gpio_drv_reg); + +static int __init omap_gpio_sysinit(void) +{ + mpuio_init(); + +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) + if (cpu_is_omap16xx() || cpu_class_is_omap2()) + register_syscore_ops(&omap_gpio_syscore_ops); +#endif + + return 0; +} + +arch_initcall(omap_gpio_sysinit); |