Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree conversions and enablement from Olof Johansson:
 "Continued device tree conversion and enablement across a number of
  platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other
  smaller series as well.

  ux500 has seen continued conversion for platforms.  Several platforms
  have seen pinctrl-via-devicetree conversions for simpler
  multiplatform.  Tegra is adding data for new devices/drivers, and
  Exynos has a bunch of new bindings and devices added as well.

  So, pretty much the same progression in the right direction as the
  last few releases."

Fix up conflicts as per Olof.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits)
  ARM: ux500: Rename dbx500 cpufreq code to be more generic
  ARM: dts: add missing ux500 device trees
  ARM: ux500: Stop registering the PCM driver from platform code
  ARM: ux500: Move board specific GPIO info out to subordinate DTS files
  ARM: ux500: Disable the MMCI gpio-regulator by default
  ARM: Kirkwood: remove kirkwood_ehci_init() from new boards
  ARM: Kirkwood: Add support LED of OpenBlocks A6
  ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6
  ARM: kirkwood: Add NAND partiton map for OpenBlocks A6
  ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6
  ARM: kirkwood: Add support DT of second I2C bus
  ARM: kirkwood: Convert mplcec4 board to pinctrl
  ARM: Kirkwood: Convert km_kirkwood to pinctrl
  ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl
  ARM: Kirkwood: Convert IX2-200 to pinctrl.
  ARM: Kirkwood: Convert lsxl boards to pinctrl.
  ARM: Kirkwood: Convert ib62x0 to pinctrl.
  ARM: Kirkwood: Convert GoFlex Net to pinctrl.
  ARM: Kirkwood: Convert dreamplug to pinctrl.
  ARM: Kirkwood: Convert dockstar to pinctrl.
  ...

2 files changed, 23 insertions, 22 deletions

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 14a6c29..a5cbeec 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -171,7 +171,7 @@ config GPIO_MSM_V2
 
 config GPIO_MVEBU
 	def_bool y
-	depends on ARCH_MVEBU
+	depends on PLAT_ORION
 	select GPIO_GENERIC
 	select GENERIC_IRQ_CHIP
 
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index a006f0d..88f41e5 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -2797,27 +2797,6 @@ static __init void exynos4_gpiolib_init(void)
 	int group = 0;
 	void __iomem *gpx_base;
 
-#ifdef CONFIG_PINCTRL_SAMSUNG
-		/*
-		 * This gpio driver includes support for device tree support and
-		 * there are platforms using it. In order to maintain
-		 * compatibility with those platforms, and to allow non-dt
-		 * Exynos4210 platforms to use this gpiolib support, a check
-		 * is added to find out if there is a active pin-controller
-		 * driver support available. If it is available, this gpiolib
-		 * support is ignored and the gpiolib support available in
-		 * pin-controller driver is used. This is a temporary check and
-		 * will go away when all of the Exynos4210 platforms have
-		 * switched to using device tree and the pin-ctrl driver.
-		 */
-		struct device_node *pctrl_np;
-		const char *pctrl_compat = "samsung,pinctrl-exynos4210";
-		pctrl_np = of_find_compatible_node(NULL, NULL, pctrl_compat);
-		if (pctrl_np)
-			if (of_device_is_available(pctrl_np))
-				return;
-#endif
-
 	/* gpio part1 */
 	gpio_base1 = ioremap(EXYNOS4_PA_GPIO1, SZ_4K);
 	if (gpio_base1 == NULL) {
@@ -3032,6 +3011,28 @@ static __init int samsung_gpiolib_init(void)
 	int i, nr_chips;
 	int group = 0;
 
+#ifdef CONFIG_PINCTRL_SAMSUNG
+	/*
+	* This gpio driver includes support for device tree support and there
+	* are platforms using it. In order to maintain compatibility with those
+	* platforms, and to allow non-dt Exynos4210 platforms to use this
+	* gpiolib support, a check is added to find out if there is a active
+	* pin-controller driver support available. If it is available, this
+	* gpiolib support is ignored and the gpiolib support available in
+	* pin-controller driver is used. This is a temporary check and will go
+	* away when all of the Exynos4210 platforms have switched to using
+	* device tree and the pin-ctrl driver.
+	*/
+	struct device_node *pctrl_np;
+	static const struct of_device_id exynos_pinctrl_ids[] = {
+		{ .compatible = "samsung,pinctrl-exynos4210", },
+		{ .compatible = "samsung,pinctrl-exynos4x12", },
+	};
+	for_each_matching_node(pctrl_np, exynos_pinctrl_ids)
+		if (pctrl_np && of_device_is_available(pctrl_np))
+			return -ENODEV;
+#endif
+
 	samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs));
 
 	if (soc_is_s3c24xx()) {