diff options
author | John Crispin <blogic@openwrt.org> | 2012-05-11 16:48:39 (GMT) |
---|---|---|
committer | Ralf Baechle <ralf@linux-mips.org> | 2012-05-21 13:31:52 (GMT) |
commit | 5238f7bc356670ba702057c7de7f07909133f788 (patch) | |
tree | 44b2b896a3101e63a1d7497a60efc339e50b1dfa /drivers/gpio | |
parent | 57c8cb8f242988b8048a7058cd1edde025c6f232 (diff) | |
download | linux-5238f7bc356670ba702057c7de7f07909133f788.tar.xz |
GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder
Move the 2 drivers from arch/mips/lantiq/xway/ to the subsystem and make them
buildable.
The following 2 patches will convert the drivers to OF.
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Patchwork: https://patchwork.linux-mips.org/patch/3838/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'drivers/gpio')
-rw-r--r-- | drivers/gpio/Kconfig | 18 | ||||
-rw-r--r-- | drivers/gpio/Makefile | 2 | ||||
-rw-r--r-- | drivers/gpio/gpio-mm-lantiq.c | 126 | ||||
-rw-r--r-- | drivers/gpio/gpio-stp-xway.c | 152 |
4 files changed, 298 insertions, 0 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index e03653d..8fae079 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -96,6 +96,14 @@ config GPIO_EP93XX depends on ARCH_EP93XX select GPIO_GENERIC +config GPIO_MM_LANTIQ + bool "Lantiq Memory mapped GPIOs" + depends on LANTIQ && SOC_XWAY + help + This enables support for memory mapped GPIOs on the External Bus Unit + (EBU) found on Lantiq SoCs. The gpios are output only as they are + created by attaching a 16bit latch to the bus. + config GPIO_MPC5200 def_bool y depends on PPC_MPC52xx @@ -306,6 +314,16 @@ config GPIO_STMPE This enables support for the GPIOs found on the STMPE I/O Expanders. +config GPIO_STP_XWAY + bool "XWAY STP GPIOs" + depends on SOC_XWAY + help + This enables support for the Serial To Parallel (STP) unit found on + XWAY SoC. The STP allows the SoC to drive a shift registers cascade, + that can be up to 24 bit. This peripheral is aimed at driving leds. + Some of the gpios/leds can be auto updated by the soc with dsl and + phy status. + config GPIO_TC3589X bool "TC3589X GPIOs" depends on MFD_TC3589X diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 007f54b..ed1c96d 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_GPIO_MC33880) += gpio-mc33880.o obj-$(CONFIG_GPIO_MC9S08DZ60) += gpio-mc9s08dz60.o obj-$(CONFIG_GPIO_MCP23S08) += gpio-mcp23s08.o obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o +obj-$(CONFIG_GPIO_MM_LANTIQ) += gpio-mm-lantiq.o obj-$(CONFIG_GPIO_MPC5200) += gpio-mpc5200.o obj-$(CONFIG_GPIO_MPC8XXX) += gpio-mpc8xxx.o obj-$(CONFIG_GPIO_MSM_V1) += gpio-msm-v1.o @@ -49,6 +50,7 @@ obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o obj-$(CONFIG_GPIO_SCH) += gpio-sch.o obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o +obj-$(CONFIG_GPIO_STP_XWAY) += gpio-stp-xway.o obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o obj-$(CONFIG_GPIO_TC3589X) += gpio-tc3589x.o obj-$(CONFIG_ARCH_TEGRA) += gpio-tegra.o diff --git a/drivers/gpio/gpio-mm-lantiq.c b/drivers/gpio/gpio-mm-lantiq.c new file mode 100644 index 0000000..b91c7f1 --- /dev/null +++ b/drivers/gpio/gpio-mm-lantiq.c @@ -0,0 +1,126 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/export.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/gpio.h> +#include <linux/io.h> + +#include <lantiq_soc.h> + +/* + * By attaching hardware latches to the EBU it is possible to create output + * only gpios. This driver configures a special memory address, which when + * written to outputs 16 bit to the latches. + */ + +#define LTQ_EBU_BUSCON 0x1e7ff /* 16 bit access, slowest timing */ +#define LTQ_EBU_WP 0x80000000 /* write protect bit */ + +/* we keep a shadow value of the last value written to the ebu */ +static int ltq_ebu_gpio_shadow = 0x0; +static void __iomem *ltq_ebu_gpio_membase; + +static void ltq_ebu_apply(void) +{ + unsigned long flags; + + spin_lock_irqsave(&ebu_lock, flags); + ltq_ebu_w32(LTQ_EBU_BUSCON, LTQ_EBU_BUSCON1); + *((__u16 *)ltq_ebu_gpio_membase) = ltq_ebu_gpio_shadow; + ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1); + spin_unlock_irqrestore(&ebu_lock, flags); +} + +static void ltq_ebu_set(struct gpio_chip *chip, unsigned offset, int value) +{ + if (value) + ltq_ebu_gpio_shadow |= (1 << offset); + else + ltq_ebu_gpio_shadow &= ~(1 << offset); + ltq_ebu_apply(); +} + +static int ltq_ebu_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + ltq_ebu_set(chip, offset, value); + + return 0; +} + +static struct gpio_chip ltq_ebu_chip = { + .label = "ltq_ebu", + .direction_output = ltq_ebu_direction_output, + .set = ltq_ebu_set, + .base = 72, + .ngpio = 16, + .can_sleep = 1, + .owner = THIS_MODULE, +}; + +static int ltq_ebu_probe(struct platform_device *pdev) +{ + int ret = 0; + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + if (!res) { + dev_err(&pdev->dev, "failed to get memory resource\n"); + return -ENOENT; + } + + res = devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), dev_name(&pdev->dev)); + if (!res) { + dev_err(&pdev->dev, "failed to request memory resource\n"); + return -EBUSY; + } + + ltq_ebu_gpio_membase = devm_ioremap_nocache(&pdev->dev, res->start, + resource_size(res)); + if (!ltq_ebu_gpio_membase) { + dev_err(&pdev->dev, "Failed to ioremap mem region\n"); + return -ENOMEM; + } + + /* grab the default shadow value passed form the platform code */ + ltq_ebu_gpio_shadow = (unsigned int) pdev->dev.platform_data; + + /* tell the ebu controller which memory address we will be using */ + ltq_ebu_w32(pdev->resource->start | 0x1, LTQ_EBU_ADDRSEL1); + + /* write protect the region */ + ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1); + + ret = gpiochip_add(<q_ebu_chip); + if (!ret) + ltq_ebu_apply(); + return ret; +} + +static struct platform_driver ltq_ebu_driver = { + .probe = ltq_ebu_probe, + .driver = { + .name = "ltq_ebu", + .owner = THIS_MODULE, + }, +}; + +static int __init ltq_ebu_init(void) +{ + int ret = platform_driver_register(<q_ebu_driver); + + if (ret) + pr_info("ltq_ebu : Error registering platfom driver!"); + return ret; +} + +postcore_initcall(ltq_ebu_init); diff --git a/drivers/gpio/gpio-stp-xway.c b/drivers/gpio/gpio-stp-xway.c new file mode 100644 index 0000000..d674f1b --- /dev/null +++ b/drivers/gpio/gpio-stp-xway.c @@ -0,0 +1,152 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2007 John Crispin <blogic@openwrt.org> + * + */ + +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/export.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <lantiq_soc.h> + +#define LTQ_STP_CON0 0x00 +#define LTQ_STP_CON1 0x04 +#define LTQ_STP_CPU0 0x08 +#define LTQ_STP_CPU1 0x0C +#define LTQ_STP_AR 0x10 + +#define LTQ_STP_CON_SWU (1 << 31) +#define LTQ_STP_2HZ 0 +#define LTQ_STP_4HZ (1 << 23) +#define LTQ_STP_8HZ (2 << 23) +#define LTQ_STP_10HZ (3 << 23) +#define LTQ_STP_SPEED_MASK (0xf << 23) +#define LTQ_STP_UPD_FPI (1 << 31) +#define LTQ_STP_UPD_MASK (3 << 30) +#define LTQ_STP_ADSL_SRC (3 << 24) + +#define LTQ_STP_GROUP0 (1 << 0) + +#define LTQ_STP_RISING 0 +#define LTQ_STP_FALLING (1 << 26) +#define LTQ_STP_EDGE_MASK (1 << 26) + +#define ltq_stp_r32(reg) __raw_readl(ltq_stp_membase + reg) +#define ltq_stp_w32(val, reg) __raw_writel(val, ltq_stp_membase + reg) +#define ltq_stp_w32_mask(clear, set, reg) \ + ltq_w32((ltq_r32(ltq_stp_membase + reg) & ~(clear)) | (set), \ + ltq_stp_membase + (reg)) + +static int ltq_stp_shadow = 0xffff; +static void __iomem *ltq_stp_membase; + +static void ltq_stp_set(struct gpio_chip *chip, unsigned offset, int value) +{ + if (value) + ltq_stp_shadow |= (1 << offset); + else + ltq_stp_shadow &= ~(1 << offset); + ltq_stp_w32(ltq_stp_shadow, LTQ_STP_CPU0); +} + +static int ltq_stp_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + ltq_stp_set(chip, offset, value); + + return 0; +} + +static struct gpio_chip ltq_stp_chip = { + .label = "ltq_stp", + .direction_output = ltq_stp_direction_output, + .set = ltq_stp_set, + .base = 48, + .ngpio = 24, + .can_sleep = 1, + .owner = THIS_MODULE, +}; + +static int ltq_stp_hw_init(void) +{ + /* sane defaults */ + ltq_stp_w32(0, LTQ_STP_AR); + ltq_stp_w32(0, LTQ_STP_CPU0); + ltq_stp_w32(0, LTQ_STP_CPU1); + ltq_stp_w32(LTQ_STP_CON_SWU, LTQ_STP_CON0); + ltq_stp_w32(0, LTQ_STP_CON1); + + /* rising or falling edge */ + ltq_stp_w32_mask(LTQ_STP_EDGE_MASK, LTQ_STP_FALLING, LTQ_STP_CON0); + + /* per default stp 15-0 are set */ + ltq_stp_w32_mask(0, LTQ_STP_GROUP0, LTQ_STP_CON1); + + /* stp are update periodically by the FPI bus */ + ltq_stp_w32_mask(LTQ_STP_UPD_MASK, LTQ_STP_UPD_FPI, LTQ_STP_CON1); + + /* set stp update speed */ + ltq_stp_w32_mask(LTQ_STP_SPEED_MASK, LTQ_STP_8HZ, LTQ_STP_CON1); + + /* tell the hardware that pin (led) 0 and 1 are controlled + * by the dsl arc + */ + ltq_stp_w32_mask(0, LTQ_STP_ADSL_SRC, LTQ_STP_CON0); + + ltq_pmu_enable(PMU_LED); + return 0; +} + +static int __devinit ltq_stp_probe(struct platform_device *pdev) +{ + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + int ret = 0; + + if (!res) + return -ENOENT; + res = devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), dev_name(&pdev->dev)); + if (!res) { + dev_err(&pdev->dev, "failed to request STP memory\n"); + return -EBUSY; + } + ltq_stp_membase = devm_ioremap_nocache(&pdev->dev, res->start, + resource_size(res)); + if (!ltq_stp_membase) { + dev_err(&pdev->dev, "failed to remap STP memory\n"); + return -ENOMEM; + } + ret = gpiochip_add(<q_stp_chip); + if (!ret) + ret = ltq_stp_hw_init(); + + return ret; +} + +static struct platform_driver ltq_stp_driver = { + .probe = ltq_stp_probe, + .driver = { + .name = "ltq_stp", + .owner = THIS_MODULE, + }, +}; + +int __init ltq_stp_init(void) +{ + int ret = platform_driver_register(<q_stp_driver); + + if (ret) + pr_info("ltq_stp: error registering platfom driver"); + return ret; +} + +postcore_initcall(ltq_stp_init); |