Merge tag 'drm-intel-next-2014-07-11' of git://anongit.freedesktop.org/drm-intel into drm-next

- fbc improvements when stolen memory is tight (Ben)
- cdclk handling improvements for vlv/chv (Ville)
- proper fix for stuck primary planes on gmch platforms with cxsr (Imre&Ebgert
  Eich)
- gen8 hw semaphore support (Ben)
- more execlist prep work from Oscar Mateo
- locking fixes for primary planes (Matt Roper)
- code rework to support runtime pm for dpms on hsw/bdw (Paulo, Imre & me), but
  not yet enabled because some fixes from Paulo haven't made the cut
- more gpu boost tuning from Chris
- as usual piles of little things all over

* tag 'drm-intel-next-2014-07-11' of git://anongit.freedesktop.org/drm-intel: (93 commits)
  drm/i915: Make the RPS interrupt generation mask handle the vlv wa
  drm/i915: Move RPS evaluation interval counters to i915->rps
  drm/i915: Don't cast a pointer to void* unnecessarily
  drm/i915: don't read LVDS regs at compute_config time
  drm/i915: check the power domains in intel_lvds_get_hw_state()
  drm/i915: check the power domains in ironlake_get_pipe_config()
  drm/i915: don't skip shared DPLL assertion on LPT
  drm/i915: Only touch WRPLL hw state in enable/disable hooks
  drm/i915: Switch to common shared dpll framework for WRPLLs
  drm/i915: ->enable hook for WRPLLs
  drm/i915: ->disable hook for WRPLLs
  drm/i915: State readout support for WRPLLs
  drm/i915: add POWER_DOMAIN_PLLS
  drm/i915: Document that the pll->mode_set hook is optional
  drm/i915: Basic shared dpll support for WRPLLs
  drm/i915: Precompute static ddi_pll_sel values in encoders
  drm/i915: BDW also has special-purpose DP DDI clocks
  drm/i915: State readout and cross-checking for ddi_pll_sel
  drm/i915: Move ddi_pll_sel into the pipe config
  drm/i915: Add a debugfs file for the shared dpll state
  ...

1 files changed, 48 insertions, 11 deletions

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index b5ec489..c06a62a 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -746,6 +746,22 @@ intel_dp_connector_unregister(struct intel_connector *intel_connector)
 }
 
 static void
+hsw_dp_set_ddi_pll_sel(struct intel_crtc_config *pipe_config, int link_bw)
+{
+	switch (link_bw) {
+	case DP_LINK_BW_1_62:
+		pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_810;
+		break;
+	case DP_LINK_BW_2_7:
+		pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_1350;
+		break;
+	case DP_LINK_BW_5_4:
+		pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_2700;
+		break;
+	}
+}
+
+static void
 intel_dp_set_clock(struct intel_encoder *encoder,
 		   struct intel_crtc_config *pipe_config, int link_bw)
 {
@@ -756,8 +772,6 @@ intel_dp_set_clock(struct intel_encoder *encoder,
 	if (IS_G4X(dev)) {
 		divisor = gen4_dpll;
 		count = ARRAY_SIZE(gen4_dpll);
-	} else if (IS_HASWELL(dev)) {
-		/* Haswell has special-purpose DP DDI clocks. */
 	} else if (HAS_PCH_SPLIT(dev)) {
 		divisor = pch_dpll;
 		count = ARRAY_SIZE(pch_dpll);
@@ -928,7 +942,10 @@ found:
 				&pipe_config->dp_m2_n2);
 	}
 
-	intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw);
+	if (HAS_DDI(dev))
+		hsw_dp_set_ddi_pll_sel(pipe_config, intel_dp->link_bw);
+	else
+		intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw);
 
 	return true;
 }
@@ -1316,8 +1333,6 @@ void intel_edp_panel_off(struct intel_dp *intel_dp)
 
 	DRM_DEBUG_KMS("Turn eDP power off\n");
 
-	edp_wait_backlight_off(intel_dp);
-
 	WARN(!intel_dp->want_panel_vdd, "Need VDD to turn off panel\n");
 
 	pp = ironlake_get_pp_control(intel_dp);
@@ -1353,6 +1368,9 @@ void intel_edp_backlight_on(struct intel_dp *intel_dp)
 		return;
 
 	DRM_DEBUG_KMS("\n");
+
+	intel_panel_enable_backlight(intel_dp->attached_connector);
+
 	/*
 	 * If we enable the backlight right away following a panel power
 	 * on, we may see slight flicker as the panel syncs with the eDP
@@ -1367,8 +1385,6 @@ void intel_edp_backlight_on(struct intel_dp *intel_dp)
 
 	I915_WRITE(pp_ctrl_reg, pp);
 	POSTING_READ(pp_ctrl_reg);
-
-	intel_panel_enable_backlight(intel_dp->attached_connector);
 }
 
 void intel_edp_backlight_off(struct intel_dp *intel_dp)
@@ -1381,8 +1397,6 @@ void intel_edp_backlight_off(struct intel_dp *intel_dp)
 	if (!is_edp(intel_dp))
 		return;
 
-	intel_panel_disable_backlight(intel_dp->attached_connector);
-
 	DRM_DEBUG_KMS("\n");
 	pp = ironlake_get_pp_control(intel_dp);
 	pp &= ~EDP_BLC_ENABLE;
@@ -1392,6 +1406,10 @@ void intel_edp_backlight_off(struct intel_dp *intel_dp)
 	I915_WRITE(pp_ctrl_reg, pp);
 	POSTING_READ(pp_ctrl_reg);
 	intel_dp->last_backlight_off = jiffies;
+
+	edp_wait_backlight_off(intel_dp);
+
+	intel_panel_disable_backlight(intel_dp->attached_connector);
 }
 
 static void ironlake_edp_pll_on(struct intel_dp *intel_dp)
@@ -1751,7 +1769,7 @@ static bool intel_edp_psr_match_conditions(struct intel_dp *intel_dp)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_crtc *crtc = dig_port->base.base.crtc;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	struct drm_i915_gem_object *obj = to_intel_framebuffer(crtc->primary->fb)->obj;
+	struct drm_i915_gem_object *obj = intel_fb_obj(crtc->primary->fb);
 	struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base;
 
 	dev_priv->psr.source_ok = false;
@@ -1784,7 +1802,6 @@ static bool intel_edp_psr_match_conditions(struct intel_dp *intel_dp)
 		return false;
 	}
 
-	obj = to_intel_framebuffer(crtc->primary->fb)->obj;
 	if (obj->tiling_mode != I915_TILING_X ||
 	    obj->fence_reg == I915_FENCE_REG_NONE) {
 		DRM_DEBUG_KMS("PSR condition failed: fb not tiled or fenced\n");
@@ -3815,6 +3832,22 @@ intel_dp_hot_plug(struct intel_encoder *intel_encoder)
 	intel_dp_check_link_status(intel_dp);
 }
 
+bool
+intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
+{
+	struct intel_dp *intel_dp = &intel_dig_port->dp;
+
+	if (long_hpd)
+		return true;
+
+	/*
+	 * we'll check the link status via the normal hot plug path later -
+	 * but for short hpds we should check it now
+	 */
+	intel_dp_check_link_status(intel_dp);
+	return false;
+}
+
 /* Return which DP Port should be selected for Transcoder DP control */
 int
 intel_trans_dp_port_sel(struct drm_crtc *crtc)
@@ -4387,6 +4420,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 void
 intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
 {
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_digital_port *intel_dig_port;
 	struct intel_encoder *intel_encoder;
 	struct drm_encoder *encoder;
@@ -4443,6 +4477,9 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
 	intel_encoder->cloneable = 0;
 	intel_encoder->hot_plug = intel_dp_hot_plug;
 
+	intel_dig_port->hpd_pulse = intel_dp_hpd_pulse;
+	dev_priv->hpd_irq_port[port] = intel_dig_port;
+
 	if (!intel_dp_init_connector(intel_dig_port, intel_connector)) {
 		drm_encoder_cleanup(encoder);
 		kfree(intel_dig_port);