summaryrefslogtreecommitdiff
path: root/drivers/i2c/busses
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-08-09 16:15:07 (GMT)
committerLinus Torvalds <torvalds@linux-foundation.org>2014-08-09 16:15:07 (GMT)
commitf7dbaef50558c08917a18f390c2609f253dc6659 (patch)
treec638428e9370117da5a2277e9fe3197ca091fc82 /drivers/i2c/busses
parent7b9828d44194b2d90595ed4bd5131cacbf29b201 (diff)
parentebba48b702ab11bbb76e357a7246bc2f19ad02bc (diff)
downloadlinux-f7dbaef50558c08917a18f390c2609f253dc6659.tar.xz
Merge branch 'i2c/for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: "Highlights: - class based instantiation finally dropped for most embedded drivers bringing boot up performance gains - removed two drivers (one outdated, one a duplicate) - ACPI has now operation region support (thanks to Lan Tianyu) - the i2c-stub driver got overhauled and gained new features to become more useful when writing i2c client drivers (thanks to Guenter Roeck and Jean Delvare) The rest is driver bugfixes, added bindings/ids, cleanups..." * 'i2c/for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (43 commits) i2c: mpc: delete unneeded test before of_node_put i2c: rk3x: fix interrupt handling issue i2c: imx: Fix format warning for dev_dbg i2c: qup: disable clks and return instead of just returning error i2c: exynos5: always enable HSI2C i2c: designware: add new bindings i2c: gpio: Drop dead code in i2c_gpio_remove i2c: pca954x: put the mux to disconnected state after resume i2c: st: Update i2c timings drivers/i2c/busses: use correct type for dma_map/unmap i2c: i2c-st: Use %pa to print 'resource_size_t' type i2c: s3c2410: resume the I2C controller earlier i2c: stub: Avoid an array overrun on I2C block transfers i2c: i801: Add device ID for Intel Wildcat Point PCH i2c: i801: Fix the alignment of the device table i2c: stub: Add support for banked register ranges i2c: stub: Remember the number of emulated chips i2c: stub: Add support for SMBus block commands i2c: efm32: correct namespacing of location property i2c: exynos5: remove extra line and fix an assignment ...
Diffstat (limited to 'drivers/i2c/busses')
-rw-r--r--drivers/i2c/busses/Kconfig46
-rw-r--r--drivers/i2c/busses/Makefile2
-rw-r--r--drivers/i2c/busses/i2c-at91.c6
-rw-r--r--drivers/i2c/busses/i2c-bcm2835.c2
-rw-r--r--drivers/i2c/busses/i2c-bfin-twi.c2
-rw-r--r--drivers/i2c/busses/i2c-davinci.c2
-rw-r--r--drivers/i2c/busses/i2c-designware-pcidrv.c9
-rw-r--r--drivers/i2c/busses/i2c-designware-platdrv.c3
-rw-r--r--drivers/i2c/busses/i2c-efm32.c8
-rw-r--r--drivers/i2c/busses/i2c-exynos5.c16
-rw-r--r--drivers/i2c/busses/i2c-gpio.c2
-rw-r--r--drivers/i2c/busses/i2c-i801.c139
-rw-r--r--drivers/i2c/busses/i2c-imx.c5
-rw-r--r--drivers/i2c/busses/i2c-mpc.c3
-rw-r--r--drivers/i2c/busses/i2c-mv64xxx.c2
-rw-r--r--drivers/i2c/busses/i2c-nomadik.c8
-rw-r--r--drivers/i2c/busses/i2c-ocores.c12
-rw-r--r--drivers/i2c/busses/i2c-omap.c2
-rw-r--r--drivers/i2c/busses/i2c-qup.c12
-rw-r--r--drivers/i2c/busses/i2c-rcar.c14
-rw-r--r--drivers/i2c/busses/i2c-rk3x.c2
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c16
-rw-r--r--drivers/i2c/busses/i2c-s6000.c404
-rw-r--r--drivers/i2c/busses/i2c-s6000.h79
-rw-r--r--drivers/i2c/busses/i2c-sirf.c2
-rw-r--r--drivers/i2c/busses/i2c-st.c34
-rw-r--r--drivers/i2c/busses/i2c-stu300.c2
-rw-r--r--drivers/i2c/busses/i2c-taos-evm.c13
-rw-r--r--drivers/i2c/busses/i2c-tegra.c2
-rw-r--r--drivers/i2c/busses/i2c-xiic.c12
-rw-r--r--drivers/i2c/busses/scx200_i2c.c129
31 files changed, 179 insertions, 811 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 9f7d585..2ac87fa 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -109,6 +109,7 @@ config I2C_I801
Avoton (SOC)
Wellsburg (PCH)
Coleto Creek (PCH)
+ Wildcat Point (PCH)
Wildcat Point-LP (PCH)
BayTrail (SOC)
@@ -465,9 +466,9 @@ config I2C_EG20T
config I2C_EXYNOS5
tristate "Exynos5 high-speed I2C driver"
depends on ARCH_EXYNOS5 && OF
+ default y
help
- Say Y here to include support for high-speed I2C controller in the
- Exynos5 based Samsung SoCs.
+ High-speed I2C controller on Exynos5 based Samsung SoCs.
config I2C_GPIO
tristate "GPIO-based bitbanging I2C"
@@ -700,16 +701,6 @@ config I2C_S3C2410
Say Y here to include support for I2C controller in the
Samsung SoCs.
-config I2C_S6000
- tristate "S6000 I2C support"
- depends on XTENSA_VARIANT_S6000
- help
- This driver supports the on chip I2C device on the
- S6000 xtensa processor family.
-
- To compile this driver as a module, choose M here. The module
- will be called i2c-s6000.
-
config I2C_SH7760
tristate "Renesas SH7760 I2C Controller"
depends on CPU_SUBTYPE_SH7760
@@ -1018,37 +1009,6 @@ config I2C_CROS_EC_TUNNEL
connected there. This will work whatever the interface used to
talk to the EC (SPI, I2C or LPC).
-config SCx200_I2C
- tristate "NatSemi SCx200 I2C using GPIO pins (DEPRECATED)"
- depends on SCx200_GPIO
- select I2C_ALGOBIT
- help
- Enable the use of two GPIO pins of a SCx200 processor as an I2C bus.
-
- If you don't know what to do here, say N.
-
- This support is also available as a module. If so, the module
- will be called scx200_i2c.
-
- This driver is deprecated and will be dropped soon. Use i2c-gpio
- (or scx200_acb) instead.
-
-config SCx200_I2C_SCL
- int "GPIO pin used for SCL"
- depends on SCx200_I2C
- default "12"
- help
- Enter the GPIO pin number used for the SCL signal. This value can
- also be specified with a module parameter.
-
-config SCx200_I2C_SDA
- int "GPIO pin used for SDA"
- depends on SCx200_I2C
- default "13"
- help
- Enter the GPIO pin number used for the SSA signal. This value can
- also be specified with a module parameter.
-
config SCx200_ACB
tristate "Geode ACCESS.bus support"
depends on X86_32 && PCI
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index dd9a7f8..49bf07e 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -68,7 +68,6 @@ obj-$(CONFIG_I2C_QUP) += i2c-qup.o
obj-$(CONFIG_I2C_RIIC) += i2c-riic.o
obj-$(CONFIG_I2C_RK3X) += i2c-rk3x.o
obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
-obj-$(CONFIG_I2C_S6000) += i2c-s6000.o
obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o
obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o
obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o
@@ -101,6 +100,5 @@ obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
-obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index e95f9ba..79a6899 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -210,7 +210,7 @@ static void at91_twi_write_data_dma_callback(void *data)
struct at91_twi_dev *dev = (struct at91_twi_dev *)data;
dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg),
- dev->buf_len, DMA_MEM_TO_DEV);
+ dev->buf_len, DMA_TO_DEVICE);
at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
}
@@ -289,7 +289,7 @@ static void at91_twi_read_data_dma_callback(void *data)
struct at91_twi_dev *dev = (struct at91_twi_dev *)data;
dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg),
- dev->buf_len, DMA_DEV_TO_MEM);
+ dev->buf_len, DMA_FROM_DEVICE);
/* The last two bytes have to be read without using dma */
dev->buf += dev->buf_len - 2;
@@ -768,7 +768,7 @@ static int at91_twi_probe(struct platform_device *pdev)
snprintf(dev->adapter.name, sizeof(dev->adapter.name), "AT91");
i2c_set_adapdata(&dev->adapter, dev);
dev->adapter.owner = THIS_MODULE;
- dev->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED;
+ dev->adapter.class = I2C_CLASS_DEPRECATED;
dev->adapter.algo = &at91_twi_algorithm;
dev->adapter.dev.parent = dev->dev;
dev->adapter.nr = pdev->id;
diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index 214ff97..4b8ecd0 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -277,7 +277,7 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
adap = &i2c_dev->adapter;
i2c_set_adapdata(adap, i2c_dev);
adap->owner = THIS_MODULE;
- adap->class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED;
+ adap->class = I2C_CLASS_DEPRECATED;
strlcpy(adap->name, "bcm2835 I2C adapter", sizeof(adap->name));
adap->algo = &bcm2835_i2c_algo;
adap->dev.parent = &pdev->dev;
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index 3e271e7..067c161 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -648,7 +648,7 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name));
p_adap->algo = &bfin_twi_algorithm;
p_adap->algo_data = iface;
- p_adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED;
+ p_adap->class = I2C_CLASS_DEPRECATED;
p_adap->dev.parent = &pdev->dev;
p_adap->timeout = 5 * HZ;
p_adap->retries = 3;
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 389bc68..4d96147 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -712,7 +712,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
adap = &dev->adapter;
i2c_set_adapdata(adap, dev);
adap->owner = THIS_MODULE;
- adap->class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED;
+ adap->class = I2C_CLASS_DEPRECATED;
strlcpy(adap->name, "DaVinci I2C adapter", sizeof(adap->name));
adap->algo = &i2c_davinci_algo;
adap->dev.parent = &pdev->dev;
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 3356f7a..d31d313 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -188,6 +188,7 @@ static struct dw_pci_controller dw_pci_controllers[] = {
.scl_sda_cfg = &hsw_config,
},
};
+
static struct i2c_algorithm i2c_dw_algo = {
.master_xfer = i2c_dw_xfer,
.functionality = i2c_dw_func,
@@ -350,6 +351,14 @@ static const struct pci_device_id i2_designware_pci_ids[] = {
/* Haswell */
{ PCI_VDEVICE(INTEL, 0x9c61), haswell },
{ PCI_VDEVICE(INTEL, 0x9c62), haswell },
+ /* Braswell / Cherrytrail */
+ { PCI_VDEVICE(INTEL, 0x22C1), baytrail,},
+ { PCI_VDEVICE(INTEL, 0x22C2), baytrail },
+ { PCI_VDEVICE(INTEL, 0x22C3), baytrail },
+ { PCI_VDEVICE(INTEL, 0x22C4), baytrail },
+ { PCI_VDEVICE(INTEL, 0x22C5), baytrail },
+ { PCI_VDEVICE(INTEL, 0x22C6), baytrail },
+ { PCI_VDEVICE(INTEL, 0x22C7), baytrail },
{ 0,}
};
MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 402ec39..bc87733 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -106,6 +106,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = {
{ "INT3432", 0 },
{ "INT3433", 0 },
{ "80860F41", 0 },
+ { "808622C1", 0 },
{ }
};
MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
@@ -202,7 +203,7 @@ static int dw_i2c_probe(struct platform_device *pdev)
adap = &dev->adapter;
i2c_set_adapdata(adap, dev);
adap->owner = THIS_MODULE;
- adap->class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED;
+ adap->class = I2C_CLASS_DEPRECATED;
strlcpy(adap->name, "Synopsys DesignWare I2C adapter",
sizeof(adap->name));
adap->algo = &i2c_dw_algo;
diff --git a/drivers/i2c/busses/i2c-efm32.c b/drivers/i2c/busses/i2c-efm32.c
index f7eccd6..10b8323 100644
--- a/drivers/i2c/busses/i2c-efm32.c
+++ b/drivers/i2c/busses/i2c-efm32.c
@@ -370,7 +370,13 @@ static int efm32_i2c_probe(struct platform_device *pdev)
return ret;
}
- ret = of_property_read_u32(np, "efm32,location", &location);
+
+ ret = of_property_read_u32(np, "energymicro,location", &location);
+
+ if (ret)
+ /* fall back to wrongly namespaced property */
+ ret = of_property_read_u32(np, "efm32,location", &location);
+
if (!ret) {
dev_dbg(&pdev->dev, "using location %u\n", location);
} else {
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index 63d2292..28073f1 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -405,7 +405,6 @@ static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id)
int_status = readl(i2c->regs + HSI2C_INT_STATUS);
writel(int_status, i2c->regs + HSI2C_INT_STATUS);
- fifo_status = readl(i2c->regs + HSI2C_FIFO_STATUS);
/* handle interrupt related to the transfer status */
if (int_status & HSI2C_INT_I2C) {
@@ -526,7 +525,7 @@ static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop)
if (i2c->msg->flags & I2C_M_RD) {
i2c_ctl |= HSI2C_RXCHON;
- i2c_auto_conf = HSI2C_READ_WRITE;
+ i2c_auto_conf |= HSI2C_READ_WRITE;
trig_lvl = (i2c->msg->len > i2c->variant->fifo_depth) ?
(i2c->variant->fifo_depth * 3 / 4) : i2c->msg->len;
@@ -549,7 +548,6 @@ static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop)
writel(fifo_ctl, i2c->regs + HSI2C_FIFO_CTL);
writel(i2c_ctl, i2c->regs + HSI2C_CTL);
-
/*
* Enable interrupts before starting the transfer so that we don't
* miss any INT_I2C interrupts.
@@ -789,8 +787,16 @@ static int exynos5_i2c_resume_noirq(struct device *dev)
}
#endif
-static SIMPLE_DEV_PM_OPS(exynos5_i2c_dev_pm_ops, exynos5_i2c_suspend_noirq,
- exynos5_i2c_resume_noirq);
+static const struct dev_pm_ops exynos5_i2c_dev_pm_ops = {
+#ifdef CONFIG_PM_SLEEP
+ .suspend_noirq = exynos5_i2c_suspend_noirq,
+ .resume_noirq = exynos5_i2c_resume_noirq,
+ .freeze_noirq = exynos5_i2c_suspend_noirq,
+ .thaw_noirq = exynos5_i2c_resume_noirq,
+ .poweroff_noirq = exynos5_i2c_suspend_noirq,
+ .restore_noirq = exynos5_i2c_resume_noirq,
+#endif
+};
static struct platform_driver exynos5_i2c_driver = {
.probe = exynos5_i2c_probe,
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index 71a45b2..933f1e4 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -238,12 +238,10 @@ static int i2c_gpio_probe(struct platform_device *pdev)
static int i2c_gpio_remove(struct platform_device *pdev)
{
struct i2c_gpio_private_data *priv;
- struct i2c_gpio_platform_data *pdata;
struct i2c_adapter *adap;
priv = platform_get_drvdata(pdev);
adap = &priv->adap;
- pdata = &priv->pdata;
i2c_del_adapter(adap);
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 6777cd6..2994690 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -22,57 +22,58 @@
*/
/*
- Supports the following Intel I/O Controller Hubs (ICH):
-
- I/O Block I2C
- region SMBus Block proc. block
- Chip name PCI ID size PEC buffer call read
- ----------------------------------------------------------------------
- 82801AA (ICH) 0x2413 16 no no no no
- 82801AB (ICH0) 0x2423 16 no no no no
- 82801BA (ICH2) 0x2443 16 no no no no
- 82801CA (ICH3) 0x2483 32 soft no no no
- 82801DB (ICH4) 0x24c3 32 hard yes no no
- 82801E (ICH5) 0x24d3 32 hard yes yes yes
- 6300ESB 0x25a4 32 hard yes yes yes
- 82801F (ICH6) 0x266a 32 hard yes yes yes
- 6310ESB/6320ESB 0x269b 32 hard yes yes yes
- 82801G (ICH7) 0x27da 32 hard yes yes yes
- 82801H (ICH8) 0x283e 32 hard yes yes yes
- 82801I (ICH9) 0x2930 32 hard yes yes yes
- EP80579 (Tolapai) 0x5032 32 hard yes yes yes
- ICH10 0x3a30 32 hard yes yes yes
- ICH10 0x3a60 32 hard yes yes yes
- 5/3400 Series (PCH) 0x3b30 32 hard yes yes yes
- 6 Series (PCH) 0x1c22 32 hard yes yes yes
- Patsburg (PCH) 0x1d22 32 hard yes yes yes
- Patsburg (PCH) IDF 0x1d70 32 hard yes yes yes
- Patsburg (PCH) IDF 0x1d71 32 hard yes yes yes
- Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes
- DH89xxCC (PCH) 0x2330 32 hard yes yes yes
- Panther Point (PCH) 0x1e22 32 hard yes yes yes
- Lynx Point (PCH) 0x8c22 32 hard yes yes yes
- Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes
- Avoton (SOC) 0x1f3c 32 hard yes yes yes
- Wellsburg (PCH) 0x8d22 32 hard yes yes yes
- Wellsburg (PCH) MS 0x8d7d 32 hard yes yes yes
- Wellsburg (PCH) MS 0x8d7e 32 hard yes yes yes
- Wellsburg (PCH) MS 0x8d7f 32 hard yes yes yes
- Coleto Creek (PCH) 0x23b0 32 hard yes yes yes
- Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes
- BayTrail (SOC) 0x0f12 32 hard yes yes yes
-
- Features supported by this driver:
- Software PEC no
- Hardware PEC yes
- Block buffer yes
- Block process call transaction no
- I2C block read transaction yes (doesn't use the block buffer)
- Slave mode no
- Interrupt processing yes
-
- See the file Documentation/i2c/busses/i2c-i801 for details.
-*/
+ * Supports the following Intel I/O Controller Hubs (ICH):
+ *
+ * I/O Block I2C
+ * region SMBus Block proc. block
+ * Chip name PCI ID size PEC buffer call read
+ * ---------------------------------------------------------------------------
+ * 82801AA (ICH) 0x2413 16 no no no no
+ * 82801AB (ICH0) 0x2423 16 no no no no
+ * 82801BA (ICH2) 0x2443 16 no no no no
+ * 82801CA (ICH3) 0x2483 32 soft no no no
+ * 82801DB (ICH4) 0x24c3 32 hard yes no no
+ * 82801E (ICH5) 0x24d3 32 hard yes yes yes
+ * 6300ESB 0x25a4 32 hard yes yes yes
+ * 82801F (ICH6) 0x266a 32 hard yes yes yes
+ * 6310ESB/6320ESB 0x269b 32 hard yes yes yes
+ * 82801G (ICH7) 0x27da 32 hard yes yes yes
+ * 82801H (ICH8) 0x283e 32 hard yes yes yes
+ * 82801I (ICH9) 0x2930 32 hard yes yes yes
+ * EP80579 (Tolapai) 0x5032 32 hard yes yes yes
+ * ICH10 0x3a30 32 hard yes yes yes
+ * ICH10 0x3a60 32 hard yes yes yes
+ * 5/3400 Series (PCH) 0x3b30 32 hard yes yes yes
+ * 6 Series (PCH) 0x1c22 32 hard yes yes yes
+ * Patsburg (PCH) 0x1d22 32 hard yes yes yes
+ * Patsburg (PCH) IDF 0x1d70 32 hard yes yes yes
+ * Patsburg (PCH) IDF 0x1d71 32 hard yes yes yes
+ * Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes
+ * DH89xxCC (PCH) 0x2330 32 hard yes yes yes
+ * Panther Point (PCH) 0x1e22 32 hard yes yes yes
+ * Lynx Point (PCH) 0x8c22 32 hard yes yes yes
+ * Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes
+ * Avoton (SOC) 0x1f3c 32 hard yes yes yes
+ * Wellsburg (PCH) 0x8d22 32 hard yes yes yes
+ * Wellsburg (PCH) MS 0x8d7d 32 hard yes yes yes
+ * Wellsburg (PCH) MS 0x8d7e 32 hard yes yes yes
+ * Wellsburg (PCH) MS 0x8d7f 32 hard yes yes yes
+ * Coleto Creek (PCH) 0x23b0 32 hard yes yes yes
+ * Wildcat Point (PCH) 0x8ca2 32 hard yes yes yes
+ * Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes
+ * BayTrail (SOC) 0x0f12 32 hard yes yes yes
+ *
+ * Features supported by this driver:
+ * Software PEC no
+ * Hardware PEC yes
+ * Block buffer yes
+ * Block process call transaction no
+ * I2C block read transaction yes (doesn't use the block buffer)
+ * Slave mode no
+ * Interrupt processing yes
+ *
+ * See the file Documentation/i2c/busses/i2c-i801 for details.
+ */
#include <linux/interrupt.h>
#include <linux/module.h>
@@ -162,24 +163,25 @@
STATUS_ERROR_FLAGS)
/* Older devices have their ID defined in <linux/pci_ids.h> */
-#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12
-#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
-#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22
+#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12
+#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22
/* Patsburg also has three 'Integrated Device Function' SMBus controllers */
-#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70
-#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71
-#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72
-#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22
-#define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS 0x1f3c
-#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330
-#define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS 0x23b0
-#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30
-#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22
-#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS 0x8d22
-#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0 0x8d7d
-#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1 0x8d7e
-#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2 0x8d7f
-#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22
+#define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS 0x1f3c
+#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330
+#define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS 0x23b0
+#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22
+#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS 0x8ca2
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS 0x8d22
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0 0x8d7d
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1 0x8d7e
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2 0x8d7f
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22
#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2
struct i801_mux_config {
@@ -823,6 +825,7 @@ static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
{ 0, }
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index aa8bc14..613069b 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -735,10 +735,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
clk_disable_unprepare(i2c_imx->clk);
dev_dbg(&i2c_imx->adapter.dev, "claimed irq %d\n", irq);
- dev_dbg(&i2c_imx->adapter.dev, "device resources from 0x%x to 0x%x\n",
- res->start, res->end);
- dev_dbg(&i2c_imx->adapter.dev, "allocated %d bytes at 0x%x\n",
- resource_size(res), res->start);
+ dev_dbg(&i2c_imx->adapter.dev, "device resources: %pR\n", res);
dev_dbg(&i2c_imx->adapter.dev, "adapter name: \"%s\"\n",
i2c_imx->adapter.name);
dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n");
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 6a32aa0..0edf630 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -341,8 +341,7 @@ static u32 mpc_i2c_get_sec_cfg_8xxx(void)
iounmap(reg);
}
}
- if (node)
- of_node_put(node);
+ of_node_put(node);
return val;
}
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 9f4b775..6dc5ded 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -863,7 +863,7 @@ mv64xxx_i2c_probe(struct platform_device *pd)
drv_data->adapter.dev.parent = &pd->dev;
drv_data->adapter.algo = &mv64xxx_i2c_algo;
drv_data->adapter.owner = THIS_MODULE;
- drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED;
+ drv_data->adapter.class = I2C_CLASS_DEPRECATED;
drv_data->adapter.nr = pd->id;
drv_data->adapter.dev.of_node = pd->dev.of_node;
platform_set_drvdata(pd, drv_data);
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 0e55d85..9ad038d 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -1032,10 +1032,10 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
adap = &dev->adap;
adap->dev.of_node = np;
adap->dev.parent = &adev->dev;
- adap->owner = THIS_MODULE;
- adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED;
- adap->algo = &nmk_i2c_algo;
- adap->timeout = msecs_to_jiffies(dev->timeout);
+ adap->owner = THIS_MODULE;
+ adap->class = I2C_CLASS_DEPRECATED;
+ adap->algo = &nmk_i2c_algo;
+ adap->timeout = msecs_to_jiffies(dev->timeout);
snprintf(adap->name, sizeof(adap->name),
"Nomadik I2C at %pR", &adev->res);
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 0e10cc6..2a4fe0b 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -239,15 +239,15 @@ static u32 ocores_func(struct i2c_adapter *adap)
}
static const struct i2c_algorithm ocores_algorithm = {
- .master_xfer = ocores_xfer,
- .functionality = ocores_func,
+ .master_xfer = ocores_xfer,
+ .functionality = ocores_func,
};
static struct i2c_adapter ocores_adapter = {
- .owner = THIS_MODULE,
- .name = "i2c-ocores",
- .class = I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED,
- .algo = &ocores_algorithm,
+ .owner = THIS_MODULE,
+ .name = "i2c-ocores",
+ .class = I2C_CLASS_DEPRECATED,
+ .algo = &ocores_algorithm,
};
static const struct of_device_id ocores_i2c_match[] = {
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index b182793..0dffb0e 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1236,7 +1236,7 @@ omap_i2c_probe(struct platform_device *pdev)
adap = &dev->adapter;
i2c_set_adapdata(adap, dev);
adap->owner = THIS_MODULE;
- adap->class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED;
+ adap->class = I2C_CLASS_DEPRECATED;
strlcpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
adap->algo = &omap_i2c_algo;
adap->dev.parent = &pdev->dev;
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index 2a5efb5..3a4d64e 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -633,13 +633,17 @@ static int qup_i2c_probe(struct platform_device *pdev)
* associated with each byte written/received
*/
size = QUP_OUTPUT_BLOCK_SIZE(io_mode);
- if (size >= ARRAY_SIZE(blk_sizes))
- return -EIO;
+ if (size >= ARRAY_SIZE(blk_sizes)) {
+ ret = -EIO;
+ goto fail;
+ }
qup->out_blk_sz = blk_sizes[size] / 2;
size = QUP_INPUT_BLOCK_SIZE(io_mode);
- if (size >= ARRAY_SIZE(blk_sizes))
- return -EIO;
+ if (size >= ARRAY_SIZE(blk_sizes)) {
+ ret = -EIO;
+ goto fail;
+ }
qup->in_blk_sz = blk_sizes[size] / 2;
size = QUP_OUTPUT_FIFO_SIZE(io_mode);
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 8994059..f3c7139 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -541,13 +541,13 @@ static int rcar_i2c_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
init_waitqueue_head(&priv->wait);
- adap = &priv->adap;
- adap->nr = pdev->id;
- adap->algo = &rcar_i2c_algo;
- adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED;
- adap->retries = 3;
- adap->dev.parent = dev;
- adap->dev.of_node = dev->of_node;
+ adap = &priv->adap;
+ adap->nr = pdev->id;
+ adap->algo = &rcar_i2c_algo;
+ adap->class = I2C_CLASS_DEPRECATED;
+ adap->retries = 3;
+ adap->dev.parent = dev;
+ adap->dev.of_node = dev->of_node;
i2c_set_adapdata(adap, priv);
strlcpy(adap->name, pdev->name, sizeof(adap->name));
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index a979150..69e1185 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -399,7 +399,7 @@ static irqreturn_t rk3x_i2c_irq(int irqno, void *dev_id)
}
/* is there anything left to handle? */
- if (unlikely(ipd == 0))
+ if (unlikely((ipd & REG_INT_ALL) == 0))
goto out;
switch (i2c->state) {
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index e828a1d..e086fb0 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -1128,11 +1128,11 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
s3c24xx_i2c_parse_dt(pdev->dev.of_node, i2c);
strlcpy(i2c->adap.name, "s3c2410-i2c", sizeof(i2c->adap.name));
- i2c->adap.owner = THIS_MODULE;
- i2c->adap.algo = &s3c24xx_i2c_algorithm;
+ i2c->adap.owner = THIS_MODULE;
+ i2c->adap.algo = &s3c24xx_i2c_algorithm;
i2c->adap.retries = 2;
- i2c->adap.class = I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED;
- i2c->tx_setup = 50;
+ i2c->adap.class = I2C_CLASS_DEPRECATED;
+ i2c->tx_setup = 50;
init_waitqueue_head(&i2c->wait);
@@ -1267,7 +1267,7 @@ static int s3c24xx_i2c_suspend_noirq(struct device *dev)
return 0;
}
-static int s3c24xx_i2c_resume(struct device *dev)
+static int s3c24xx_i2c_resume_noirq(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
@@ -1285,7 +1285,11 @@ static int s3c24xx_i2c_resume(struct device *dev)
static const struct dev_pm_ops s3c24xx_i2c_dev_pm_ops = {
#ifdef CONFIG_PM_SLEEP
.suspend_noirq = s3c24xx_i2c_suspend_noirq,
- .resume = s3c24xx_i2c_resume,
+ .resume_noirq = s3c24xx_i2c_resume_noirq,
+ .freeze_noirq = s3c24xx_i2c_suspend_noirq,
+ .thaw_noirq = s3c24xx_i2c_resume_noirq,
+ .poweroff_noirq = s3c24xx_i2c_suspend_noirq,
+ .restore_noirq = s3c24xx_i2c_resume_noirq,
#endif
};
diff --git a/drivers/i2c/busses/i2c-s6000.c b/drivers/i2c/busses/i2c-s6000.c
deleted file mode 100644
index dd186a0..0000000
--- a/drivers/i2c/busses/i2c-s6000.c
+++ /dev/null
@@ -1,404 +0,0 @@
-/*
- * drivers/i2c/busses/i2c-s6000.c
- *
- * Description: Driver for S6000 Family I2C Interface
- * Copyright (c) 2008 emlix GmbH
- * Author: Oskar Schirmer <oskar@scara.com>
- *
- * Partially based on i2c-bfin-twi.c driver by <sonic.zhang@analog.com>
- * Copyright (c) 2005-2007 Analog Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/i2c/s6000.h>
-#include <linux/timer.h>
-#include <linux/spinlock.h>
-#include <linux/completion.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include "i2c-s6000.h"
-
-#define DRV_NAME "i2c-s6000"
-
-#define POLL_TIMEOUT (2 * HZ)
-
-struct s6i2c_if {
- u8 __iomem *reg; /* memory mapped registers */
- int irq;
- spinlock_t lock;
- struct i2c_msg *msgs; /* messages currently handled */
- int msgs_num; /* nb of msgs to do */
- int msgs_push; /* nb of msgs read/written */
- int msgs_done; /* nb of msgs finally handled */
- unsigned push; /* nb of bytes read/written in msg */
- unsigned done; /* nb of bytes finally handled */
- int timeout_count; /* timeout retries left */
- struct timer_list timeout_timer;
- struct i2c_adapter adap;
- struct completion complete;
- struct clk *clk;
- struct resource *res;
-};
-
-static inline u16 i2c_rd16(struct s6i2c_if *iface, unsigned n)
-{
- return readw(iface->reg + (n));
-}
-
-static inline void i2c_wr16(struct s6i2c_if *iface, unsigned n, u16 v)
-{
- writew(v, iface->reg + (n));
-}
-
-static inline u32 i2c_rd32(struct s6i2c_if *iface, unsigned n)
-{
- return readl(iface->reg + (n));
-}
-
-static inline void i2c_wr32(struct s6i2c_if *iface, unsigned n, u32 v)
-{
- writel(v, iface->reg + (n));
-}
-
-static struct s6i2c_if s6i2c_if;
-
-static void s6i2c_handle_interrupt(struct s6i2c_if *iface)
-{
- if (i2c_rd16(iface, S6_I2C_INTRSTAT) & (1 << S6_I2C_INTR_TXABRT)) {
- i2c_rd16(iface, S6_I2C_CLRTXABRT);
- i2c_wr16(iface, S6_I2C_INTRMASK, 0);
- complete(&iface->complete);
- return;
- }
- if (iface->msgs_done >= iface->msgs_num) {
- dev_err(&iface->adap.dev, "s6i2c: spurious I2C irq: %04x\n",
- i2c_rd16(iface, S6_I2C_INTRSTAT));
- i2c_wr16(iface, S6_I2C_INTRMASK, 0);
- return;
- }
- while ((iface->msgs_push < iface->msgs_num)
- && (i2c_rd16(iface, S6_I2C_STATUS) & (1 << S6_I2C_STATUS_TFNF))) {
- struct i2c_msg *m = &iface->msgs[iface->msgs_push];
- if (!(m->flags & I2C_M_RD))
- i2c_wr16(iface, S6_I2C_DATACMD, m->buf[iface->push]);
- else
- i2c_wr16(iface, S6_I2C_DATACMD,
- 1 << S6_I2C_DATACMD_READ);
- if (++iface->push >= m->len) {
- iface->push = 0;
- iface->msgs_push += 1;
- }
- }
- do {
- struct i2c_msg *m = &iface->msgs[iface->msgs_done];
- if (!(m->flags & I2C_M_RD)) {
- if (iface->msgs_done < iface->msgs_push)
- iface->msgs_done += 1;
- else
- break;
- } else if (i2c_rd16(iface, S6_I2C_STATUS)
- & (1 << S6_I2C_STATUS_RFNE)) {
- m->buf[iface->done] = i2c_rd16(iface, S6_I2C_DATACMD);
- if (++iface->done >= m->len) {
- iface->done = 0;
- iface->msgs_done += 1;
- }
- } else{
- break;
- }
- } while (iface->msgs_done < iface->msgs_num);
- if (iface->msgs_done >= iface->msgs_num) {
- i2c_wr16(iface, S6_I2C_INTRMASK, 1 << S6_I2C_INTR_TXABRT);
- complete(&iface->complete);
- } else if (iface->msgs_push >= iface->msgs_num) {
- i2c_wr16(iface, S6_I2C_INTRMASK, (1 << S6_I2C_INTR_TXABRT) |
- (1 << S6_I2C_INTR_RXFULL));
- } else {
- i2c_wr16(iface, S6_I2C_INTRMASK, (1 << S6_I2C_INTR_TXABRT) |
- (1 << S6_I2C_INTR_TXEMPTY) |
- (1 << S6_I2C_INTR_RXFULL));
- }
-}
-
-static irqreturn_t s6i2c_interrupt_entry(int irq, void *dev_id)
-{
- struct s6i2c_if *iface = dev_id;
- if (!(i2c_rd16(iface, S6_I2C_STATUS) & ((1 << S6_I2C_INTR_RXUNDER)
- | (1 << S6_I2C_INTR_RXOVER)
- | (1 << S6_I2C_INTR_RXFULL)
- | (1 << S6_I2C_INTR_TXOVER)
- | (1 << S6_I2C_INTR_TXEMPTY)
- | (1 << S6_I2C_INTR_RDREQ)
- | (1 << S6_I2C_INTR_TXABRT)
- | (1 << S6_I2C_INTR_RXDONE)
- | (1 << S6_I2C_INTR_ACTIVITY)
- | (1 << S6_I2C_INTR_STOPDET)
- | (1 << S6_I2C_INTR_STARTDET)
- | (1 << S6_I2C_INTR_GENCALL))))
- return IRQ_NONE;
-
- spin_lock(&iface->lock);
- del_timer(&iface->timeout_timer);
- s6i2c_handle_interrupt(iface);
- spin_unlock(&iface->lock);
- return IRQ_HANDLED;
-}
-
-static void s6i2c_timeout(unsigned long data)
-{
- struct s6i2c_if *iface = (struct s6i2c_if *)data;
- unsigned long flags;
-
- spin_lock_irqsave(&iface->lock, flags);
- s6i2c_handle_interrupt(iface);
- if (--iface->timeout_count > 0) {
- iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
- add_timer(&iface->timeout_timer);
- } else {
- complete(&iface->complete);
- i2c_wr16(iface, S6_I2C_INTRMASK, 0);
- }
- spin_unlock_irqrestore(&iface->lock, flags);
-}
-
-static int s6i2c_master_xfer(struct i2c_adapter *adap,
- struct i2c_msg *msgs, int num)
-{
- struct s6i2c_if *iface = adap->algo_data;
- int i;
- if (num == 0)
- return 0;
- if (i2c_rd16(iface, S6_I2C_STATUS) & (1 << S6_I2C_STATUS_ACTIVITY))
- yield();
- i2c_wr16(iface, S6_I2C_INTRMASK, 0);
- i2c_rd16(iface, S6_I2C_CLRINTR);
- for (i = 0; i < num; i++) {
- if (msgs[i].flags & I2C_M_TEN) {
- dev_err(&adap->dev,
- "s6i2c: 10 bits addr not supported\n");
- return -EINVAL;
- }
- if (msgs[i].len == 0) {
- dev_err(&adap->dev,
- "s6i2c: zero length message not supported\n");
- return -EINVAL;
- }
- if (msgs[i].addr != msgs[0].addr) {
- dev_err(&adap->dev,
- "s6i2c: multiple xfer cannot change target\n");
- return -EINVAL;
- }
- }
-
- iface->msgs = msgs;
- iface->msgs_num = num;
- iface->msgs_push = 0;
- iface->msgs_done = 0;
- iface->push = 0;
- iface->done = 0;
- iface->timeout_count = 10;
- i2c_wr16(iface, S6_I2C_TAR, msgs[0].addr);
- i2c_wr16(iface, S6_I2C_ENABLE, 1);
- i2c_wr16(iface, S6_I2C_INTRMASK, (1 << S6_I2C_INTR_TXEMPTY) |
- (1 << S6_I2C_INTR_TXABRT));
-
- iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
- add_timer(&iface->timeout_timer);
- wait_for_completion(&iface->complete);
- del_timer_sync(&iface->timeout_timer);
- while (i2c_rd32(iface, S6_I2C_TXFLR) > 0)
- schedule();
- while (i2c_rd16(iface, S6_I2C_STATUS) & (1 << S6_I2C_STATUS_ACTIVITY))
- schedule();
-
- i2c_wr16(iface, S6_I2C_INTRMASK, 0);
- i2c_wr16(iface, S6_I2C_ENABLE, 0);
- return iface->msgs_done;
-}
-
-static u32 s6i2c_functionality(struct i2c_adapter *adap)
-{
- return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
-}
-
-static struct i2c_algorithm s6i2c_algorithm = {
- .master_xfer = s6i2c_master_xfer,
- .functionality = s6i2c_functionality,
-};
-
-static u16 nanoseconds_on_clk(struct s6i2c_if *iface, u32 ns)
-{
- u32 dividend = ((clk_get_rate(iface->clk) / 1000) * ns) / 1000000;
- if (dividend > 0xffff)
- return 0xffff;
- return dividend;
-}
-
-static int s6i2c_probe(struct platform_device *dev)
-{
- struct s6i2c_if *iface = &s6i2c_if;
- struct i2c_adapter *p_adap;
- const char *clock;
- int bus_num, rc;
- spin_lock_init(&iface->lock);
- init_completion(&iface->complete);
- iface->irq = platform_get_irq(dev, 0);
- if (iface->irq < 0) {
- rc = iface->irq;
- goto err_out;
- }
- iface->res = platform_get_resource(dev, IORESOURCE_MEM, 0);
- if (!iface->res) {
- rc = -ENXIO;
- goto err_out;
- }
- iface->res = request_mem_region(iface->res->start,
- resource_size(iface->res),
- dev->dev.bus_id);
- if (!iface->res) {
- rc = -EBUSY;
- goto err_out;
- }
- iface->reg = ioremap_nocache(iface->res->start,
- resource_size(iface->res));
- if (!iface->reg) {
- rc = -ENOMEM;
- goto err_reg;
- }
-
- clock = 0;
- bus_num = -1;
- if (dev_get_platdata(&dev->dev)) {
- struct s6_i2c_platform_data *pdata =
- dev_get_platdata(&dev->dev);
- bus_num = pdata->bus_num;
- clock = pdata->clock;
- }
- iface->clk = clk_get(&dev->dev, clock);
- if (IS_ERR(iface->clk)) {
- rc = PTR_ERR(iface->clk);
- goto err_map;
- }
- rc = clk_enable(iface->clk);
- if (rc < 0)
- goto err_clk_put;
- init_timer(&iface->timeout_timer);
- iface->timeout_timer.function = s6i2c_timeout;
- iface->timeout_timer.data = (unsigned long)iface;
-
- p_adap = &iface->adap;
- strlcpy(p_adap->name, dev->name, sizeof(p_adap->name));
- p_adap->algo = &s6i2c_algorithm;
- p_adap->algo_data = iface;
- p_adap->nr = bus_num;
- p_adap->class = 0;
- p_adap->dev.parent = &dev->dev;
- i2c_wr16(iface, S6_I2C_INTRMASK, 0);
- rc = request_irq(iface->irq, s6i2c_interrupt_entry,
- IRQF_SHARED, dev->name, iface);
- if (rc) {
- dev_err(&p_adap->dev, "s6i2c: can't get IRQ %d\n", iface->irq);
- goto err_clk_dis;
- }
-
- i2c_wr16(iface, S6_I2C_ENABLE, 0);
- udelay(1);
- i2c_wr32(iface, S6_I2C_SRESET, 1 << S6_I2C_SRESET_IC_SRST);
- i2c_wr16(iface, S6_I2C_CLRTXABRT, 1);
- i2c_wr16(iface, S6_I2C_CON,
- (1 << S6_I2C_CON_MASTER) |
- (S6_I2C_CON_SPEED_NORMAL << S6_I2C_CON_SPEED) |
- (0 << S6_I2C_CON_10BITSLAVE) |
- (0 << S6_I2C_CON_10BITMASTER) |
- (1 << S6_I2C_CON_RESTARTENA) |
- (1 << S6_I2C_CON_SLAVEDISABLE));
- i2c_wr16(iface, S6_I2C_SSHCNT, nanoseconds_on_clk(iface, 4000));
- i2c_wr16(iface, S6_I2C_SSLCNT, nanoseconds_on_clk(iface, 4700));
- i2c_wr16(iface, S6_I2C_FSHCNT, nanoseconds_on_clk(iface, 600));
- i2c_wr16(iface, S6_I2C_FSLCNT, nanoseconds_on_clk(iface, 1300));
- i2c_wr16(iface, S6_I2C_RXTL, 0);
- i2c_wr16(iface, S6_I2C_TXTL, 0);
-
- platform_set_drvdata(dev, iface);
- rc = i2c_add_numbered_adapter(p_adap);
- if (rc)
- goto err_irq_free;
- return 0;
-
-err_irq_free:
- free_irq(iface->irq, iface);
-err_clk_dis:
- clk_disable(iface->clk);
-err_clk_put:
- clk_put(iface->clk);
-err_map:
- iounmap(iface->reg);
-err_reg:
- release_mem_region(iface->res->start,
- resource_size(iface->res));
-err_out:
- return rc;
-}
-
-static int s6i2c_remove(struct platform_device *pdev)
-{
- struct s6i2c_if *iface = platform_get_drvdata(pdev);
- i2c_wr16(iface, S6_I2C_ENABLE, 0);
- i2c_del_adapter(&iface->adap);
- free_irq(iface->irq, iface);
- clk_disable(iface->clk);
- clk_put(iface->clk);
- iounmap(iface->reg);
- release_mem_region(iface->res->start,
- resource_size(iface->res));
- return 0;
-}
-
-static struct platform_driver s6i2c_driver = {
- .probe = s6i2c_probe,
- .remove = s6i2c_remove,
- .driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-static int __init s6i2c_init(void)
-{
- pr_info("I2C: S6000 I2C driver\n");
- return platform_driver_register(&s6i2c_driver);
-}
-
-static void __exit s6i2c_exit(void)
-{
- platform_driver_unregister(&s6i2c_driver);
-}
-
-MODULE_DESCRIPTION("I2C-Bus adapter routines for S6000 I2C");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" DRV_NAME);
-
-subsys_initcall(s6i2c_init);
-module_exit(s6i2c_exit);
diff --git a/drivers/i2c/busses/i2c-s6000.h b/drivers/i2c/busses/i2c-s6000.h
deleted file mode 100644
index 4936f9f..0000000
--- a/drivers/i2c/busses/i2c-s6000.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * drivers/i2c/busses/i2c-s6000.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2008 Emlix GmbH <info@emlix.com>
- * Author: Oskar Schirmer <oskar@scara.com>
- */
-
-#ifndef __DRIVERS_I2C_BUSSES_I2C_S6000_H
-#define __DRIVERS_I2C_BUSSES_I2C_S6000_H
-
-#define S6_I2C_CON 0x000
-#define S6_I2C_CON_MASTER 0
-#define S6_I2C_CON_SPEED 1
-#define S6_I2C_CON_SPEED_NORMAL 1
-#define S6_I2C_CON_SPEED_FAST 2
-#define S6_I2C_CON_SPEED_MASK 3
-#define S6_I2C_CON_10BITSLAVE 3
-#define S6_I2C_CON_10BITMASTER 4
-#define S6_I2C_CON_RESTARTENA 5
-#define S6_I2C_CON_SLAVEDISABLE 6
-#define S6_I2C_TAR 0x004
-#define S6_I2C_TAR_GCORSTART 10
-#define S6_I2C_TAR_SPECIAL 11
-#define S6_I2C_SAR 0x008
-#define S6_I2C_HSMADDR 0x00C
-#define S6_I2C_DATACMD 0x010
-#define S6_I2C_DATACMD_READ 8
-#define S6_I2C_SSHCNT 0x014
-#define S6_I2C_SSLCNT 0x018
-#define S6_I2C_FSHCNT 0x01C
-#define S6_I2C_FSLCNT 0x020
-#define S6_I2C_INTRSTAT 0x02C
-#define S6_I2C_INTRMASK 0x030
-#define S6_I2C_RAWINTR 0x034
-#define S6_I2C_INTR_RXUNDER 0
-#define S6_I2C_INTR_RXOVER 1
-#define S6_I2C_INTR_RXFULL 2
-#define S6_I2C_INTR_TXOVER 3
-#define S6_I2C_INTR_TXEMPTY 4
-#define S6_I2C_INTR_RDREQ 5
-#define S6_I2C_INTR_TXABRT 6
-#define S6_I2C_INTR_RXDONE 7
-#define S6_I2C_INTR_ACTIVITY 8
-#define S6_I2C_INTR_STOPDET 9
-#define S6_I2C_INTR_STARTDET 10
-#define S6_I2C_INTR_GENCALL 11
-#define S6_I2C_RXTL 0x038
-#define S6_I2C_TXTL 0x03C
-#define S6_I2C_CLRINTR 0x040
-#define S6_I2C_CLRRXUNDER 0x044
-#define S6_I2C_CLRRXOVER 0x048
-#define S6_I2C_CLRTXOVER 0x04C
-#define S6_I2C_CLRRDREQ 0x050
-#define S6_I2C_CLRTXABRT 0x054
-#define S6_I2C_CLRRXDONE 0x058
-#define S6_I2C_CLRACTIVITY 0x05C
-#define S6_I2C_CLRSTOPDET 0x060
-#define S6_I2C_CLRSTARTDET 0x064
-#define S6_I2C_CLRGENCALL 0x068
-#define S6_I2C_ENABLE 0x06C
-#define S6_I2C_STATUS 0x070
-#define S6_I2C_STATUS_ACTIVITY 0
-#define S6_I2C_STATUS_TFNF 1
-#define S6_I2C_STATUS_TFE 2
-#define S6_I2C_STATUS_RFNE 3
-#define S6_I2C_STATUS_RFF 4
-#define S6_I2C_TXFLR 0x074
-#define S6_I2C_RXFLR 0x078
-#define S6_I2C_SRESET 0x07C
-#define S6_I2C_SRESET_IC_SRST 0
-#define S6_I2C_SRESET_IC_MASTER_SRST 1
-#define S6_I2C_SRESET_IC_SLAVE_SRST 2
-#define S6_I2C_TXABRTSOURCE 0x080
-
-#endif
diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c
index a3216de..b1336d5 100644
--- a/drivers/i2c/busses/i2c-sirf.c
+++ b/drivers/i2c/busses/i2c-sirf.c
@@ -311,7 +311,7 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev)
goto out;
}
adap = &siic->adapter;
- adap->class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED;
+ adap->class = I2C_CLASS_DEPRECATED;
mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
siic->base = devm_ioremap_resource(&pdev->dev, mem_res);
diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c
index 95b94767..2e4eccd 100644
--- a/drivers/i2c/busses/i2c-st.c
+++ b/drivers/i2c/busses/i2c-st.c
@@ -206,25 +206,31 @@ static inline void st_i2c_clr_bits(void __iomem *reg, u32 mask)
writel_relaxed(readl_relaxed(reg) & ~mask, reg);
}
-/* From I2C Specifications v0.5 */
+/*
+ * From I2C Specifications v0.5.
+ *
+ * All the values below have +10% margin added to be
+ * compatible with some out-of-spec devices,
+ * like HDMI link of the Toshiba 19AV600 TV.
+ */
static struct st_i2c_timings i2c_timings[] = {
[I2C_MODE_STANDARD] = {
.rate = 100000,
- .rep_start_hold = 4000,
- .rep_start_setup = 4700,
- .start_hold = 4000,
- .data_setup_time = 250,
- .stop_setup_time = 4000,
- .bus_free_time = 4700,
+ .rep_start_hold = 4400,
+ .rep_start_setup = 5170,
+ .start_hold = 4400,
+ .data_setup_time = 275,
+ .stop_setup_time = 4400,
+ .bus_free_time = 5170,
},
[I2C_MODE_FAST] = {
.rate = 400000,
- .rep_start_hold = 600,
- .rep_start_setup = 600,
- .start_hold = 600,
- .data_setup_time = 100,
- .stop_setup_time = 600,
- .bus_free_time = 1300,
+ .rep_start_hold = 660,
+ .rep_start_setup = 660,
+ .start_hold = 660,
+ .data_setup_time = 110,
+ .stop_setup_time = 660,
+ .bus_free_time = 1430,
},
};
@@ -815,7 +821,7 @@ static int st_i2c_probe(struct platform_device *pdev)
adap = &i2c_dev->adap;
i2c_set_adapdata(adap, i2c_dev);
- snprintf(adap->name, sizeof(adap->name), "ST I2C(0x%x)", res->start);
+ snprintf(adap->name, sizeof(adap->name), "ST I2C(0x%pa)", &res->start);
adap->owner = THIS_MODULE;
adap->timeout = 2 * HZ;
adap->retries = 0;
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index fefb1c1..6a44f37 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -909,7 +909,7 @@ static int stu300_probe(struct platform_device *pdev)
adap = &dev->adapter;
adap->owner = THIS_MODULE;
/* DDC class but actually often used for more generic I2C */
- adap->class = I2C_CLASS_DDC | I2C_CLASS_DEPRECATED;
+ adap->class = I2C_CLASS_DEPRECATED;
strlcpy(adap->name, "ST Microelectronics DDC I2C adapter",
sizeof(adap->name));
adap->nr = bus_nr;
diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c
index 0576026..10855a0 100644
--- a/drivers/i2c/busses/i2c-taos-evm.c
+++ b/drivers/i2c/busses/i2c-taos-evm.c
@@ -311,19 +311,8 @@ static struct serio_driver taos_drv = {
.interrupt = taos_interrupt,
};
-static int __init taos_init(void)
-{
- return serio_register_driver(&taos_drv);
-}
-
-static void __exit taos_exit(void)
-{
- serio_unregister_driver(&taos_drv);
-}
+module_serio_driver(taos_drv);
MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
MODULE_DESCRIPTION("TAOS evaluation module driver");
MODULE_LICENSE("GPL");
-
-module_init(taos_init);
-module_exit(taos_exit);
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index f1bb2fc..87d0371 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -792,7 +792,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
i2c_set_adapdata(&i2c_dev->adapter, i2c_dev);
i2c_dev->adapter.owner = THIS_MODULE;
- i2c_dev->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED;
+ i2c_dev->adapter.class = I2C_CLASS_DEPRECATED;
strlcpy(i2c_dev->adapter.name, "Tegra I2C adapter",
sizeof(i2c_dev->adapter.name));
i2c_dev->adapter.algo = &tegra_i2c_algo;
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 7731f17..ade9223 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -677,15 +677,15 @@ static u32 xiic_func(struct i2c_adapter *adap)
}
static const struct i2c_algorithm xiic_algorithm = {
- .master_xfer = xiic_xfer,
- .functionality = xiic_func,
+ .master_xfer = xiic_xfer,
+ .functionality = xiic_func,
};
static struct i2c_adapter xiic_adapter = {
- .owner = THIS_MODULE,
- .name = DRIVER_NAME,
- .class = I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED,
- .algo = &xiic_algorithm,
+ .owner = THIS_MODULE,
+ .name = DRIVER_NAME,
+ .class = I2C_CLASS_DEPRECATED,
+ .algo = &xiic_algorithm,
};
diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c
deleted file mode 100644
index 8eadf0f4..0000000
--- a/drivers/i2c/busses/scx200_i2c.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/* linux/drivers/i2c/busses/scx200_i2c.c
-
- Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
-
- National Semiconductor SCx200 I2C bus on GPIO pins
-
- Based on i2c-velleman.c Copyright (C) 1995-96, 2000 Simon G. Vogl
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/io.h>
-
-#include <linux/scx200_gpio.h>
-
-MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>");
-MODULE_DESCRIPTION("NatSemi SCx200 I2C Driver");
-MODULE_LICENSE("GPL");
-
-static int scl = CONFIG_SCx200_I2C_SCL;
-static int sda = CONFIG_SCx200_I2C_SDA;
-
-module_param(scl, int, 0);
-MODULE_PARM_DESC(scl, "GPIO line for SCL");
-module_param(sda, int, 0);
-MODULE_PARM_DESC(sda, "GPIO line for SDA");
-
-static void scx200_i2c_setscl(void *data, int state)
-{
- scx200_gpio_set(scl, state);
-}
-
-static void scx200_i2c_setsda(void *data, int state)
-{
- scx200_gpio_set(sda, state);
-}
-
-static int scx200_i2c_getscl(void *data)
-{
- return scx200_gpio_get(scl);
-}
-
-static int scx200_i2c_getsda(void *data)
-{
- return scx200_gpio_get(sda);
-}
-
-/* ------------------------------------------------------------------------
- * Encapsulate the above functions in the correct operations structure.
- * This is only done when more than one hardware adapter is supported.
- */
-
-static struct i2c_algo_bit_data scx200_i2c_data = {
- .setsda = scx200_i2c_setsda,
- .setscl = scx200_i2c_setscl,
- .getsda = scx200_i2c_getsda,
- .getscl = scx200_i2c_getscl,
- .udelay = 10,
- .timeout = HZ,
-};
-
-static struct i2c_adapter scx200_i2c_ops = {
- .owner = THIS_MODULE,
- .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
- .algo_data = &scx200_i2c_data,
- .name = "NatSemi SCx200 I2C",
-};
-
-static int scx200_i2c_init(void)
-{
- pr_debug("NatSemi SCx200 I2C Driver\n");
-
- if (!scx200_gpio_present()) {
- pr_err("no SCx200 gpio pins available\n");
- return -ENODEV;
- }
-
- pr_debug("SCL=GPIO%02u, SDA=GPIO%02u\n", scl, sda);
-
- if (scl == -1 || sda == -1 || scl == sda) {
- pr_err("scl and sda must be specified\n");
- return -EINVAL;
- }
-
- /* Configure GPIOs as open collector outputs */
- scx200_gpio_configure(scl, ~2, 5);
- scx200_gpio_configure(sda, ~2, 5);
-
- if (i2c_bit_add_bus(&scx200_i2c_ops) < 0) {
- pr_err("adapter %s registration failed\n", scx200_i2c_ops.name);
- return -ENODEV;
- }
-
- return 0;
-}
-
-static void scx200_i2c_cleanup(void)
-{
- i2c_del_adapter(&scx200_i2c_ops);
-}
-
-module_init(scx200_i2c_init);
-module_exit(scx200_i2c_cleanup);
-
-/*
- Local variables:
- compile-command: "make -k -C ../.. SUBDIRS=drivers/i2c modules"
- c-basic-offset: 8
- End:
-*/