diff options
author | Lucas De Marchi <lucas.demarchi@profusion.mobi> | 2011-03-31 01:57:33 (GMT) |
---|---|---|
committer | Lucas De Marchi <lucas.demarchi@profusion.mobi> | 2011-03-31 14:26:23 (GMT) |
commit | 25985edcedea6396277003854657b5f3cb31a628 (patch) | |
tree | f026e810210a2ee7290caeb737c23cb6472b7c38 /drivers/i2c | |
parent | 6aba74f2791287ec407e0f92487a725a25908067 (diff) | |
download | linux-25985edcedea6396277003854657b5f3cb31a628.tar.xz |
Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Diffstat (limited to 'drivers/i2c')
-rw-r--r-- | drivers/i2c/algos/i2c-algo-pca.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-ali1535.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-ali15x3.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-davinci.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-designware.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-elektor.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-i801.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-ibm_iic.c | 4 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-intel-mid.c | 14 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-isch.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-mxs.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-nomadik.c | 8 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-s6000.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-stu300.c | 4 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-tegra.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-xiic.c | 2 | ||||
-rw-r--r-- | drivers/i2c/i2c-core.c | 2 |
17 files changed, 28 insertions, 28 deletions
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index 2b9a8f5..4ca9cf9 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -343,7 +343,7 @@ static int pca_xfer(struct i2c_adapter *i2c_adap, ret = curmsg; out: - DEB1("}}} transfered %d/%d messages. " + DEB1("}}} transferred %d/%d messages. " "status is %#04x. control is %#04x\n", curmsg, num, pca_status(adap), pca_get_con(adap)); diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index 906a3ca5..dd36417 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -295,7 +295,7 @@ static int ali1535_transaction(struct i2c_adapter *adap) } /* Unfortunately the ALI SMB controller maps "no response" and "bus - * collision" into a single bit. No reponse is the usual case so don't + * collision" into a single bit. No response is the usual case so don't * do a printk. This means that bus collisions go unreported. */ if (temp & ALI1535_STS_BUSERR) { diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index b14f6d6..83e8a60 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -318,7 +318,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap) /* Unfortunately the ALI SMB controller maps "no response" and "bus - collision" into a single bit. No reponse is the usual case so don't + collision" into a single bit. No response is the usual case so don't do a printk. This means that bus collisions go unreported. */ diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index 5795c83..a76d85f 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -355,7 +355,7 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) /* * Write mode register first as needed for correct behaviour * on OMAP-L138, but don't set STT yet to avoid a race with XRDY - * occuring before we have loaded DXR + * occurring before we have loaded DXR */ davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag); diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware.c index b664ed8..b7a51c4 100644 --- a/drivers/i2c/busses/i2c-designware.c +++ b/drivers/i2c/busses/i2c-designware.c @@ -178,7 +178,7 @@ static char *abort_sources[] = { * @lock: protect this struct and IO registers * @clk: input reference clock * @cmd_err: run time hadware error code - * @msgs: points to an array of messages currently being transfered + * @msgs: points to an array of messages currently being transferred * @msgs_num: the number of elements in msgs * @msg_write_idx: the element index of the current tx message in the msgs * array diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index e5b1a3b..37e2e82 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -22,7 +22,7 @@ /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even Frodo Looijaard <frodol@dds.nl> */ -/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of +/* Partially rewriten by Oleg I. Vdovikin for mmapped support of for Alpha Processor Inc. UP-2000(+) boards */ #include <linux/kernel.h> diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index ed2e0c5..72c0415f 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -96,7 +96,7 @@ #define SMBHSTCFG_SMB_SMI_EN 2 #define SMBHSTCFG_I2C_EN 4 -/* Auxillary control register bits, ICH4+ only */ +/* Auxiliary control register bits, ICH4+ only */ #define SMBAUXCTL_CRC 1 #define SMBAUXCTL_E32B 2 diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index e4f88dc..3c110fb 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -494,7 +494,7 @@ static int iic_xfer_bytes(struct ibm_iic_private* dev, struct i2c_msg* pm, if (unlikely(ret < 0)) break; else if (unlikely(ret != count)){ - DBG("%d: xfer_bytes, requested %d, transfered %d\n", + DBG("%d: xfer_bytes, requested %d, transferred %d\n", dev->idx, count, ret); /* If it's not a last part of xfer, abort it */ @@ -593,7 +593,7 @@ static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) if (unlikely((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE)){ DBG("%d: iic_xfer, bus is not free\n", dev->idx); - /* Usually it means something serious has happend. + /* Usually it means something serious has happened. * We *cannot* have unfinished previous transfer * so it doesn't make any sense to try to stop it. * Probably we were not able to recover from the diff --git a/drivers/i2c/busses/i2c-intel-mid.c b/drivers/i2c/busses/i2c-intel-mid.c index c714927..e828ac8 100644 --- a/drivers/i2c/busses/i2c-intel-mid.c +++ b/drivers/i2c/busses/i2c-intel-mid.c @@ -170,8 +170,8 @@ struct intel_mid_i2c_private { /* Raw Interrupt Status Register */ #define IC_RAW_INTR_STAT 0x34 /* Read Only */ #define GEN_CALL (1 << 11) /* General call */ -#define START_DET (1 << 10) /* (RE)START occured */ -#define STOP_DET (1 << 9) /* STOP occured */ +#define START_DET (1 << 10) /* (RE)START occurred */ +#define STOP_DET (1 << 9) /* STOP occurred */ #define ACTIVITY (1 << 8) /* Bus busy */ #define RX_DONE (1 << 7) /* Not used in Master mode */ #define TX_ABRT (1 << 6) /* Transmit Abort */ @@ -375,7 +375,7 @@ static int intel_mid_i2c_disable(struct i2c_adapter *adap) * I2C should be disabled prior to other register operation. If failed, an * errno is returned. Mask and Clear all interrpts, this should be done at * first. Set common registers which will not be modified during normal - * transfers, including: controll register, FIFO threshold and clock freq. + * transfers, including: control register, FIFO threshold and clock freq. * Check APB data width at last. */ static int intel_mid_i2c_hwinit(struct intel_mid_i2c_private *i2c) @@ -455,7 +455,7 @@ static inline bool intel_mid_i2c_address_neq(const struct i2c_msg *p1, * * By reading register IC_TX_ABRT_SOURCE, various transfer errors can be * distingushed. At present, no circumstances have been found out that - * multiple errors would be occured simutaneously, so we simply use the + * multiple errors would be occurred simutaneously, so we simply use the * register value directly. * * At last the error bits are cleared. (Note clear ABRT_SBYTE_NORSTRT bit need @@ -469,7 +469,7 @@ static void intel_mid_i2c_abort(struct intel_mid_i2c_private *i2c) /* Single transfer error check: * According to databook, TX/RX FIFOs would be flushed when - * the abort interrupt occured. + * the abort interrupt occurred. */ if (abort & ABRT_MASTER_DIS) dev_err(&adap->dev, @@ -569,7 +569,7 @@ static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length) * Return Values: * 0 if the read transfer succeeds * -ETIMEDOUT if we cannot read the "raw" interrupt register - * -EINVAL if a transfer abort occured + * -EINVAL if a transfer abort occurred * * For every byte, a "WRITE" command will be loaded into IC_DATA_CMD prior to * data transfer. The actual "write" operation will be performed when the @@ -697,7 +697,7 @@ static int intel_mid_i2c_setup(struct i2c_adapter *adap, struct i2c_msg *pmsg) * @num: number of i2c_msg * * Return Values: - * + number of messages transfered + * + number of messages transferred * -ETIMEDOUT If cannot disable I2C controller or read IC_STATUS * -EINVAL If the address in i2c_msg is invalid * diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c index ddc258e..0682f8f 100644 --- a/drivers/i2c/busses/i2c-isch.c +++ b/drivers/i2c/busses/i2c-isch.c @@ -141,7 +141,7 @@ static int sch_transaction(void) * This is the main access entry for i2c-sch access * adap is i2c_adapter pointer, addr is the i2c device bus address, read_write * (0 for read and 1 for write), size is i2c transaction type and data is the - * union of transaction for data to be transfered or data read from bus. + * union of transaction for data to be transferred or data read from bus. * return 0 for success and others for failure. */ static s32 sch_access(struct i2c_adapter *adap, u16 addr, diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index caf96dc..7e78f7c 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -149,7 +149,7 @@ static void mxs_i2c_pioq_setup_write(struct mxs_i2c_dev *i2c, * We have to copy the slave address (u8) and buffer (arbitrary number * of u8) into the data register (u32). To achieve that, the u8 are put * into the MSBs of 'data' which is then shifted for the next u8. When - * apropriate, 'data' is written to MXS_I2C_DATA. So, the first u32 + * appropriate, 'data' is written to MXS_I2C_DATA. So, the first u32 * looks like this: * * 3 2 1 0 diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 594ed50..e10e5cf 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -126,9 +126,9 @@ enum i2c_operation { /** * struct i2c_nmk_client - client specific data * @slave_adr: 7-bit slave address - * @count: no. bytes to be transfered + * @count: no. bytes to be transferred * @buffer: client data buffer - * @xfer_bytes: bytes transfered till now + * @xfer_bytes: bytes transferred till now * @operation: current I2C operation */ struct i2c_nmk_client { @@ -330,7 +330,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev) * slsu defines the data setup time after SCL clock * stretching in terms of i2c clk cycles. The * needed setup time for the three modes are 250ns, - * 100ns, 10ns repectively thus leading to the values + * 100ns, 10ns respectively thus leading to the values * of 14, 6, 2 for a 48 MHz i2c clk. */ writel(dev->cfg.slsu << 16, dev->virtbase + I2C_SCR); @@ -364,7 +364,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev) /* * set the speed mode. Currently we support * only standard and fast mode of operation - * TODO - support for fast mode plus (upto 1Mb/s) + * TODO - support for fast mode plus (up to 1Mb/s) * and high speed (up to 3.4 Mb/s) */ if (dev->cfg.sm > I2C_FREQ_MODE_FAST) { diff --git a/drivers/i2c/busses/i2c-s6000.c b/drivers/i2c/busses/i2c-s6000.c index cadc021..cb5d01e 100644 --- a/drivers/i2c/busses/i2c-s6000.c +++ b/drivers/i2c/busses/i2c-s6000.c @@ -318,7 +318,7 @@ static int __devinit s6i2c_probe(struct platform_device *dev) rc = request_irq(iface->irq, s6i2c_interrupt_entry, IRQF_SHARED, dev->name, iface); if (rc) { - dev_err(&p_adap->dev, "s6i2c: cant get IRQ %d\n", iface->irq); + dev_err(&p_adap->dev, "s6i2c: can't get IRQ %d\n", iface->irq); goto err_clk_dis; } diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c index 266135d..9987961 100644 --- a/drivers/i2c/busses/i2c-stu300.c +++ b/drivers/i2c/busses/i2c-stu300.c @@ -497,7 +497,7 @@ static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate) u32 val; int i = 0; - /* Locate the apropriate clock setting */ + /* Locate the appropriate clock setting */ while (i < ARRAY_SIZE(stu300_clktable) - 1 && stu300_clktable[i].rate < clkrate) i++; @@ -644,7 +644,7 @@ static int stu300_send_address(struct stu300_dev *dev, ret = stu300_await_event(dev, STU300_EVENT_6); /* - * Clear any pending EVENT 6 no matter what happend during + * Clear any pending EVENT 6 no matter what happened during * await_event. */ val = stu300_r8(dev->virtbase + I2C_CR); diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 3921f66..b4ab39b 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -386,7 +386,7 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id) dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS); return IRQ_HANDLED; err: - /* An error occured, mask all interrupts */ + /* An error occurred, mask all interrupts */ tegra_i2c_mask_irq(i2c_dev, I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST | I2C_INT_PACKET_XFER_COMPLETE | I2C_INT_TX_FIFO_DATA_REQ | I2C_INT_RX_FIFO_DATA_REQ); diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index 9fbd7e6..e9d5ff4 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -21,7 +21,7 @@ * to the automotive development board Russellville. The copyright holder * as seen in the header is Intel corporation. * Mocean Laboratories forked off the GNU/Linux platform work into a - * separate company called Pelagicore AB, which commited the code to the + * separate company called Pelagicore AB, which committed the code to the * kernel. */ diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index e5f76a0..70c30e6 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -348,7 +348,7 @@ EXPORT_SYMBOL(i2c_verify_client); /* This is a permissive address validity check, I2C address map constraints - * are purposedly not enforced, except for the general call address. */ + * are purposely not enforced, except for the general call address. */ static int i2c_check_client_addr_validity(const struct i2c_client *client) { if (client->flags & I2C_CLIENT_TEN) { |