diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-05-23 16:02:42 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-05-23 16:02:42 (GMT) |
commit | 6f73b3629f774c6cba589b15fd095112b25ca923 (patch) | |
tree | 50a60feae71cb5f40078f552b9b08468bc7b29c9 /drivers/i2c | |
parent | 3a8580f82024e30b31c662aa49346adf7a3bcdb5 (diff) | |
parent | 2074b1d9d53ae696dd3f49482bad43254f40f01d (diff) | |
download | linux-6f73b3629f774c6cba589b15fd095112b25ca923.tar.xz |
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Benjamin Herrenschmidt:
"Here are the powerpc goodies for 3.5. Main highlights are:
- Support for the NX crypto engine in Power7+
- A bunch of Anton goodness, including some micro optimization of our
syscall entry on Power7
- I converted a pile of our thermal control drivers to the new i2c
APIs (essentially turning the old therm_pm72 into a proper set of
windfarm drivers). That's one more step toward removing the
deprecated i2c APIs, there's still a few drivers to fix, but we are
getting close
- kexec/kdump support for 47x embedded cores
The big missing thing here is no updates from Freescale. Not sure
what's up here, but with Kumar not working for them anymore things are
a bit in a state of flux in that area."
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (71 commits)
powerpc: Fix irq distribution
Revert "powerpc/hw-breakpoint: Use generic hw-breakpoint interfaces for new PPC ptrace flags"
powerpc: Fixing a cputhread code documentation
powerpc/crypto: Enable the PFO-based encryption device
powerpc/crypto: Build files for the nx device driver
powerpc/crypto: debugfs routines and docs for the nx device driver
powerpc/crypto: SHA512 hash routines for nx encryption
powerpc/crypto: SHA256 hash routines for nx encryption
powerpc/crypto: AES-XCBC mode routines for nx encryption
powerpc/crypto: AES-GCM mode routines for nx encryption
powerpc/crypto: AES-ECB mode routines for nx encryption
powerpc/crypto: AES-CTR mode routines for nx encryption
powerpc/crypto: AES-CCM mode routines for nx encryption
powerpc/crypto: AES-CBC mode routines for nx encryption
powerpc/crypto: nx driver code supporting nx encryption
powerpc/pseries: Enable the PFO-based RNG accelerator
powerpc/pseries/hwrng: PFO-based hwrng driver
powerpc/pseries: Add PFO support to the VIO bus
powerpc/pseries: Add pseries update notifier for OFDT prop changes
powerpc/pseries: Add new hvcall constants to support PFO
...
Diffstat (limited to 'drivers/i2c')
-rw-r--r-- | drivers/i2c/busses/i2c-powermac.c | 98 |
1 files changed, 71 insertions, 27 deletions
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c index 7b397c6..31c47e1 100644 --- a/drivers/i2c/busses/i2c-powermac.c +++ b/drivers/i2c/busses/i2c-powermac.c @@ -227,6 +227,72 @@ static int __devexit i2c_powermac_remove(struct platform_device *dev) return 0; } +static void __devinit i2c_powermac_register_devices(struct i2c_adapter *adap, + struct pmac_i2c_bus *bus) +{ + struct i2c_client *newdev; + struct device_node *node; + + for_each_child_of_node(adap->dev.of_node, node) { + struct i2c_board_info info = {}; + struct dev_archdata dev_ad = {}; + const __be32 *reg; + char tmp[16]; + u32 addr; + int len; + + /* Get address & channel */ + reg = of_get_property(node, "reg", &len); + if (!reg || (len < sizeof(int))) { + dev_err(&adap->dev, "i2c-powermac: invalid reg on %s\n", + node->full_name); + continue; + } + addr = be32_to_cpup(reg); + + /* Multibus setup, check channel */ + if (!pmac_i2c_match_adapter(node, adap)) + continue; + + dev_dbg(&adap->dev, "i2c-powermac: register %s\n", + node->full_name); + + /* Make up a modalias. Note: we to _NOT_ want the standard + * i2c drivers to match with any of our powermac stuff + * unless they have been specifically modified to handle + * it on a case by case basis. For example, for thermal + * control, things like lm75 etc... shall match with their + * corresponding windfarm drivers, _NOT_ the generic ones, + * so we force a prefix of AAPL, onto the modalias to + * make that happen + */ + if (of_modalias_node(node, tmp, sizeof(tmp)) < 0) { + dev_err(&adap->dev, "i2c-powermac: modalias failure" + " on %s\n", node->full_name); + continue; + } + snprintf(info.type, sizeof(info.type), "MAC,%s", tmp); + + /* Fill out the rest of the info structure */ + info.addr = (addr & 0xff) >> 1; + info.irq = irq_of_parse_and_map(node, 0); + info.of_node = of_node_get(node); + info.archdata = &dev_ad; + + newdev = i2c_new_device(adap, &info); + if (!newdev) { + dev_err(&adap->dev, "i2c-powermac: Failure to register" + " %s\n", node->full_name); + of_node_put(node); + /* We do not dispose of the interrupt mapping on + * purpose. It's not necessary (interrupt cannot be + * re-used) and somebody else might have grabbed it + * via direct DT lookup so let's not bother + */ + continue; + } + } +} static int __devinit i2c_powermac_probe(struct platform_device *dev) { @@ -272,6 +338,7 @@ static int __devinit i2c_powermac_probe(struct platform_device *dev) adapter->algo = &i2c_powermac_algorithm; i2c_set_adapdata(adapter, bus); adapter->dev.parent = &dev->dev; + adapter->dev.of_node = dev->dev.of_node; rc = i2c_add_adapter(adapter); if (rc) { printk(KERN_ERR "i2c-powermac: Adapter %s registration " @@ -281,33 +348,10 @@ static int __devinit i2c_powermac_probe(struct platform_device *dev) printk(KERN_INFO "PowerMac i2c bus %s registered\n", adapter->name); - if (!strncmp(basename, "uni-n", 5)) { - struct device_node *np; - const u32 *prop; - struct i2c_board_info info; - - /* Instantiate I2C motion sensor if present */ - np = of_find_node_by_name(NULL, "accelerometer"); - if (np && of_device_is_compatible(np, "AAPL,accelerometer_1") && - (prop = of_get_property(np, "reg", NULL))) { - int i2c_bus; - const char *tmp_bus; - - /* look for bus either using "reg" or by path */ - tmp_bus = strstr(np->full_name, "/i2c-bus@"); - if (tmp_bus) - i2c_bus = *(tmp_bus + 9) - '0'; - else - i2c_bus = ((*prop) >> 8) & 0x0f; - - if (pmac_i2c_get_channel(bus) == i2c_bus) { - memset(&info, 0, sizeof(struct i2c_board_info)); - info.addr = ((*prop) & 0xff) >> 1; - strlcpy(info.type, "ams", I2C_NAME_SIZE); - i2c_new_device(adapter, &info); - } - } - } + /* Cannot use of_i2c_register_devices() due to Apple device-tree + * funkyness + */ + i2c_powermac_register_devices(adapter, bus); return rc; } |