Merge tag 'iio-for-4.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanups for IIO in the 4.5 cycle

Usual mixed bag, but the big item perhaps in this series is the DMA buffer
support added by Lars-Peter Clausen. It's been in the works for a long time
and it will be interesting to see what hardware support shows up now that
this is available.

New core features + associate cleanup.
* Add generic DMA buffer infrastructure
* Add a DMAengine framework based buffer
 Also associated minor changes.
   - Set the device buffer watermark based on the minimum watermark for all
     attached buffers rather than just the 'primary' one.
   - iio_buffer_init - only set the watermark default if one hasn't already
     been provided.  This allows simple support for devices with a fixed
     watermark.
   - read only attribute for watermark on fixed watermark devices.
   - add explicit buffer enable/disable callbacks to allow the buffer to
     do more than trivial actions when it is being turned on and off.
* IIO_VAL_INT support in write_raw_get_fmt function.

New device support
* Freescale MMA7455/7456L accelerometers
* Memsic MXC6255XC accelerometer
* ST lis2dh12 accelerometer
* TI ADS8688 ADC
* TI Palamas (twl6035/7) gpadc

New driver features
* mma8452
  - support either of the available interrupt pins to cope with the case
    where board layout has lead to a particular one being connected.

Staging graduation
* Dummy driver
  - this driver acts as both an example and a test device for those with
    out hardware to develop userspace code against.

Cleanups and minor bits and bobs.
* treewide
  - Sort out the ordering of iio_device_register/unregister vs runtime
    pm function calls so that it's all nice and consistent and not race
    prone.
  - Check sscanf return values.  None of the cases will actually happen as
    the strings are supplied internally, but best to be consistent on this.
* ad7780
  - switch over to the gpio descriptor interface and remove the now unused
    platform data which gets rid of a header entirely.
* ad7793
  - drop a pointless else statement.
* at91_adc
  - Swap kmalloc_array in for a kmalloc doing the same job.
* dummy
  - get rid of some commented out lines that snuck in during the move of
    the driver.
* lm3533-als
  - Print an error message on provision of an invalid resistance.
* mcp320x
  - Add compatible strings with vendor prefix and deprecate those with
    no vendor prefix.
* mxs-lradc
  - Use BIT macro in various places rather than shifted ones.
* pa12203001
  - Power off the chip if the registration fails.
* pulsedlight-lidar-lite
  - add runtime PM support.
* xilinx XADC
  - constify an iio_buffer_setup_ops structure.

16 files changed, 742 insertions, 50 deletions

diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 969428d..edc29b1 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -64,7 +64,7 @@ config IIO_ST_ACCEL_3AXIS
 	help
 	  Say yes here to build support for STMicroelectronics accelerometers:
 	  LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
-	  LIS331DLH, LSM303DL, LSM303DLM, LSM330.
+	  LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12.
 
 	  This driver can also be built as a module. If so, these modules
 	  will be created:
@@ -107,6 +107,35 @@ config KXCJK1013
 	  To compile this driver as a module, choose M here: the module will
 	  be called kxcjk-1013.
 
+config MMA7455
+	tristate
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+
+config MMA7455_I2C
+	tristate "Freescale MMA7455L/MMA7456L Accelerometer I2C Driver"
+	depends on I2C
+	select MMA7455
+	select REGMAP_I2C
+	help
+	  Say yes here to build support for the Freescale MMA7455L and
+	  MMA7456L 3-axis accelerometer.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called mma7455_i2c.
+
+config MMA7455_SPI
+	tristate "Freescale MMA7455L/MMA7456L Accelerometer SPI Driver"
+	depends on SPI_MASTER
+	select MMA7455
+	select REGMAP_SPI
+	help
+	  Say yes here to build support for the Freescale MMA7455L and
+	  MMA7456L 3-axis accelerometer.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called mma7455_spi.
+
 config MMA8452
 	tristate "Freescale MMA8452Q and similar Accelerometers Driver"
 	depends on I2C
@@ -158,6 +187,17 @@ config MXC4005
 	  To compile this driver as a module, choose M. The module will be
 	  called mxc4005.
 
+config MXC6255
+	tristate "Memsic MXC6255 Orientation Sensing Accelerometer Driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say yes here to build support for the Memsic MXC6255 Orientation
+	  Sensing Accelerometer Driver.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called mxc6255.
+
 config STK8312
 	tristate "Sensortek STK8312 3-Axis Accelerometer Driver"
 	depends on I2C
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index 7925f16..71b6794 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -10,6 +10,11 @@ obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o
 obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
 obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o
 obj-$(CONFIG_KXSD9)	+= kxsd9.o
+
+obj-$(CONFIG_MMA7455)		+= mma7455_core.o
+obj-$(CONFIG_MMA7455_I2C)	+= mma7455_i2c.o
+obj-$(CONFIG_MMA7455_SPI)	+= mma7455_spi.o
+
 obj-$(CONFIG_MMA8452)	+= mma8452.o
 
 obj-$(CONFIG_MMA9551_CORE)	+= mma9551_core.o
@@ -17,6 +22,7 @@ obj-$(CONFIG_MMA9551)		+= mma9551.o
 obj-$(CONFIG_MMA9553)		+= mma9553.o
 
 obj-$(CONFIG_MXC4005)		+= mxc4005.o
+obj-$(CONFIG_MXC6255)		+= mxc6255.o
 
 obj-$(CONFIG_STK8312)		+= stk8312.o
 obj-$(CONFIG_STK8BA50)		+= stk8ba50.o
diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c
index 2d33f1e..c73331f7 100644
--- a/drivers/iio/accel/bmc150-accel-core.c
+++ b/drivers/iio/accel/bmc150-accel-core.c
@@ -1623,24 +1623,22 @@ int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
 		}
 	}
 
-	ret = iio_device_register(indio_dev);
-	if (ret < 0) {
-		dev_err(dev, "Unable to register iio device\n");
-		goto err_trigger_unregister;
-	}
-
 	ret = pm_runtime_set_active(dev);
 	if (ret)
-		goto err_iio_unregister;
+		goto err_trigger_unregister;
 
 	pm_runtime_enable(dev);
 	pm_runtime_set_autosuspend_delay(dev, BMC150_AUTO_SUSPEND_DELAY_MS);
 	pm_runtime_use_autosuspend(dev);
 
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(dev, "Unable to register iio device\n");
+		goto err_trigger_unregister;
+	}
+
 	return 0;
 
-err_iio_unregister:
-	iio_device_unregister(indio_dev);
 err_trigger_unregister:
 	bmc150_accel_unregister_triggers(data, BMC150_ACCEL_TRIGGERS - 1);
 err_buffer_cleanup:
@@ -1655,12 +1653,12 @@ int bmc150_accel_core_remove(struct device *dev)
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct bmc150_accel_data *data = iio_priv(indio_dev);
 
+	iio_device_unregister(indio_dev);
+
 	pm_runtime_disable(data->dev);
 	pm_runtime_set_suspended(data->dev);
 	pm_runtime_put_noidle(data->dev);
 
-	iio_device_unregister(indio_dev);
-
 	bmc150_accel_unregister_triggers(data, BMC150_ACCEL_TRIGGERS - 1);
 
 	iio_triggered_buffer_cleanup(indio_dev);
diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
index 18c1b06..edec1d0 100644
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -1264,25 +1264,23 @@ static int kxcjk1013_probe(struct i2c_client *client,
 		goto err_trigger_unregister;
 	}
 
-	ret = iio_device_register(indio_dev);
-	if (ret < 0) {
-		dev_err(&client->dev, "unable to register iio device\n");
-		goto err_buffer_cleanup;
-	}
-
 	ret = pm_runtime_set_active(&client->dev);
 	if (ret)
-		goto err_iio_unregister;
+		goto err_buffer_cleanup;
 
 	pm_runtime_enable(&client->dev);
 	pm_runtime_set_autosuspend_delay(&client->dev,
 					 KXCJK1013_SLEEP_DELAY_MS);
 	pm_runtime_use_autosuspend(&client->dev);
 
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(&client->dev, "unable to register iio device\n");
+		goto err_buffer_cleanup;
+	}
+
 	return 0;
 
-err_iio_unregister:
-	iio_device_unregister(indio_dev);
 err_buffer_cleanup:
 	if (data->dready_trig)
 		iio_triggered_buffer_cleanup(indio_dev);
@@ -1302,12 +1300,12 @@ static int kxcjk1013_remove(struct i2c_client *client)
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 	struct kxcjk1013_data *data = iio_priv(indio_dev);
 
+	iio_device_unregister(indio_dev);
+
 	pm_runtime_disable(&client->dev);
 	pm_runtime_set_suspended(&client->dev);
 	pm_runtime_put_noidle(&client->dev);
 
-	iio_device_unregister(indio_dev);
-
 	if (data->dready_trig) {
 		iio_triggered_buffer_cleanup(indio_dev);
 		iio_trigger_unregister(data->dready_trig);
diff --git a/drivers/iio/accel/mma7455.h b/drivers/iio/accel/mma7455.h
new file mode 100644
index 0000000..2b1152c
--- /dev/null
+++ b/drivers/iio/accel/mma7455.h
@@ -0,0 +1,19 @@
+/*
+ * IIO accel driver for Freescale MMA7455L 3-axis 10-bit accelerometer
+ * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MMA7455_H
+#define __MMA7455_H
+
+extern const struct regmap_config mma7455_core_regmap;
+
+int mma7455_core_probe(struct device *dev, struct regmap *regmap,
+		       const char *name);
+int mma7455_core_remove(struct device *dev);
+
+#endif
diff --git a/drivers/iio/accel/mma7455_core.c b/drivers/iio/accel/mma7455_core.c
new file mode 100644
index 0000000..c633cc2
--- /dev/null
+++ b/drivers/iio/accel/mma7455_core.c
@@ -0,0 +1,311 @@
+/*
+ * IIO accel core driver for Freescale MMA7455L 3-axis 10-bit accelerometer
+ * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * UNSUPPORTED hardware features:
+ *  - 8-bit mode with different scales
+ *  - INT1/INT2 interrupts
+ *  - Offset calibration
+ *  - Events
+ */
+
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "mma7455.h"
+
+#define MMA7455_REG_XOUTL		0x00
+#define MMA7455_REG_XOUTH		0x01
+#define MMA7455_REG_YOUTL		0x02
+#define MMA7455_REG_YOUTH		0x03
+#define MMA7455_REG_ZOUTL		0x04
+#define MMA7455_REG_ZOUTH		0x05
+#define MMA7455_REG_STATUS		0x09
+#define  MMA7455_STATUS_DRDY		BIT(0)
+#define MMA7455_REG_WHOAMI		0x0f
+#define  MMA7455_WHOAMI_ID		0x55
+#define MMA7455_REG_MCTL		0x16
+#define  MMA7455_MCTL_MODE_STANDBY	0x00
+#define  MMA7455_MCTL_MODE_MEASURE	0x01
+#define MMA7455_REG_CTL1		0x18
+#define  MMA7455_CTL1_DFBW_MASK		BIT(7)
+#define  MMA7455_CTL1_DFBW_125HZ	BIT(7)
+#define  MMA7455_CTL1_DFBW_62_5HZ	0
+#define MMA7455_REG_TW			0x1e
+
+/*
+ * When MMA7455 is used in 10-bit it has a fullscale of -8g
+ * corresponding to raw value -512. The userspace interface
+ * uses m/s^2 and we declare micro units.
+ * So scale factor is given by:
+ *       g * 8 * 1e6 / 512 = 153228.90625, with g = 9.80665
+ */
+#define MMA7455_10BIT_SCALE	153229
+
+struct mma7455_data {
+	struct regmap *regmap;
+	struct device *dev;
+};
+
+static int mma7455_drdy(struct mma7455_data *mma7455)
+{
+	unsigned int reg;
+	int tries = 3;
+	int ret;
+
+	while (tries-- > 0) {
+		ret = regmap_read(mma7455->regmap, MMA7455_REG_STATUS, &reg);
+		if (ret)
+			return ret;
+
+		if (reg & MMA7455_STATUS_DRDY)
+			return 0;
+
+		msleep(20);
+	}
+
+	dev_warn(mma7455->dev, "data not ready\n");
+
+	return -EIO;
+}
+
+static irqreturn_t mma7455_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct mma7455_data *mma7455 = iio_priv(indio_dev);
+	u8 buf[16]; /* 3 x 16-bit channels + padding + ts */
+	int ret;
+
+	ret = mma7455_drdy(mma7455);
+	if (ret)
+		goto done;
+
+	ret = regmap_bulk_read(mma7455->regmap, MMA7455_REG_XOUTL, buf,
+			       sizeof(__le16) * 3);
+	if (ret)
+		goto done;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns());
+
+done:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int mma7455_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct mma7455_data *mma7455 = iio_priv(indio_dev);
+	unsigned int reg;
+	__le16 data;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (iio_buffer_enabled(indio_dev))
+			return -EBUSY;
+
+		ret = mma7455_drdy(mma7455);
+		if (ret)
+			return ret;
+
+		ret = regmap_bulk_read(mma7455->regmap, chan->address, &data,
+				       sizeof(data));
+		if (ret)
+			return ret;
+
+		*val = sign_extend32(le16_to_cpu(data), 9);
+
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		*val2 = MMA7455_10BIT_SCALE;
+
+		return IIO_VAL_INT_PLUS_MICRO;
+
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = regmap_read(mma7455->regmap, MMA7455_REG_CTL1, &reg);
+		if (ret)
+			return ret;
+
+		if (reg & MMA7455_CTL1_DFBW_MASK)
+			*val = 250;
+		else
+			*val = 125;
+
+		return IIO_VAL_INT;
+	}
+
+	return -EINVAL;
+}
+
+static int mma7455_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct mma7455_data *mma7455 = iio_priv(indio_dev);
+	int i;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (val == 250 && val2 == 0)
+			i = MMA7455_CTL1_DFBW_125HZ;
+		else if (val == 125 && val2 == 0)
+			i = MMA7455_CTL1_DFBW_62_5HZ;
+		else
+			return -EINVAL;
+
+		return regmap_update_bits(mma7455->regmap, MMA7455_REG_CTL1,
+					  MMA7455_CTL1_DFBW_MASK, i);
+
+	case IIO_CHAN_INFO_SCALE:
+		/* In 10-bit mode there is only one scale available */
+		if (val == 0 && val2 == MMA7455_10BIT_SCALE)
+			return 0;
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static IIO_CONST_ATTR(sampling_frequency_available, "125 250");
+
+static struct attribute *mma7455_attributes[] = {
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group mma7455_group = {
+	.attrs = mma7455_attributes,
+};
+
+static const struct iio_info mma7455_info = {
+	.attrs = &mma7455_group,
+	.read_raw = mma7455_read_raw,
+	.write_raw = mma7455_write_raw,
+	.driver_module = THIS_MODULE,
+};
+
+#define MMA7455_CHANNEL(axis, idx) { \
+	.type = IIO_ACCEL, \
+	.modified = 1, \
+	.address = MMA7455_REG_##axis##OUTL,\
+	.channel2 = IIO_MOD_##axis, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+				    BIT(IIO_CHAN_INFO_SCALE), \
+	.scan_index = idx, \
+	.scan_type = { \
+		.sign = 's', \
+		.realbits = 10, \
+		.storagebits = 16, \
+		.endianness = IIO_LE, \
+	}, \
+}
+
+static const struct iio_chan_spec mma7455_channels[] = {
+	MMA7455_CHANNEL(X, 0),
+	MMA7455_CHANNEL(Y, 1),
+	MMA7455_CHANNEL(Z, 2),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
+static const unsigned long mma7455_scan_masks[] = {0x7, 0};
+
+const struct regmap_config mma7455_core_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = MMA7455_REG_TW,
+};
+EXPORT_SYMBOL_GPL(mma7455_core_regmap);
+
+int mma7455_core_probe(struct device *dev, struct regmap *regmap,
+		       const char *name)
+{
+	struct mma7455_data *mma7455;
+	struct iio_dev *indio_dev;
+	unsigned int reg;
+	int ret;
+
+	ret = regmap_read(regmap, MMA7455_REG_WHOAMI, &reg);
+	if (ret) {
+		dev_err(dev, "unable to read reg\n");
+		return ret;
+	}
+
+	if (reg != MMA7455_WHOAMI_ID) {
+		dev_err(dev, "device id mismatch\n");
+		return -ENODEV;
+	}
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*mma7455));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, indio_dev);
+	mma7455 = iio_priv(indio_dev);
+	mma7455->regmap = regmap;
+	mma7455->dev = dev;
+
+	indio_dev->info = &mma7455_info;
+	indio_dev->name = name;
+	indio_dev->dev.parent = dev;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = mma7455_channels;
+	indio_dev->num_channels = ARRAY_SIZE(mma7455_channels);
+	indio_dev->available_scan_masks = mma7455_scan_masks;
+
+	regmap_write(mma7455->regmap, MMA7455_REG_MCTL,
+		     MMA7455_MCTL_MODE_MEASURE);
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+					 mma7455_trigger_handler, NULL);
+	if (ret) {
+		dev_err(dev, "unable to setup triggered buffer\n");
+		return ret;
+	}
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(dev, "unable to register device\n");
+		iio_triggered_buffer_cleanup(indio_dev);
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mma7455_core_probe);
+
+int mma7455_core_remove(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct mma7455_data *mma7455 = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+
+	regmap_write(mma7455->regmap, MMA7455_REG_MCTL,
+		     MMA7455_MCTL_MODE_STANDBY);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mma7455_core_remove);
+
+MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
+MODULE_DESCRIPTION("Freescale MMA7455L core accelerometer driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/mma7455_i2c.c b/drivers/iio/accel/mma7455_i2c.c
new file mode 100644
index 0000000..3cab5fb
--- /dev/null
+++ b/drivers/iio/accel/mma7455_i2c.c
@@ -0,0 +1,56 @@
+/*
+ * IIO accel I2C driver for Freescale MMA7455L 3-axis 10-bit accelerometer
+ * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "mma7455.h"
+
+static int mma7455_i2c_probe(struct i2c_client *i2c,
+			     const struct i2c_device_id *id)
+{
+	struct regmap *regmap;
+	const char *name = NULL;
+
+	regmap = devm_regmap_init_i2c(i2c, &mma7455_core_regmap);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	if (id)
+		name = id->name;
+
+	return mma7455_core_probe(&i2c->dev, regmap, name);
+}
+
+static int mma7455_i2c_remove(struct i2c_client *i2c)
+{
+	return mma7455_core_remove(&i2c->dev);
+}
+
+static const struct i2c_device_id mma7455_i2c_ids[] = {
+	{ "mma7455", 0 },
+	{ "mma7456", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mma7455_i2c_ids);
+
+static struct i2c_driver mma7455_i2c_driver = {
+	.probe = mma7455_i2c_probe,
+	.remove = mma7455_i2c_remove,
+	.id_table = mma7455_i2c_ids,
+	.driver = {
+		.name	= "mma7455-i2c",
+	},
+};
+module_i2c_driver(mma7455_i2c_driver);
+
+MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
+MODULE_DESCRIPTION("Freescale MMA7455L I2C accelerometer driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/mma7455_spi.c b/drivers/iio/accel/mma7455_spi.c
new file mode 100644
index 0000000..79df8f2
--- /dev/null
+++ b/drivers/iio/accel/mma7455_spi.c
@@ -0,0 +1,52 @@
+/*
+ * IIO accel SPI driver for Freescale MMA7455L 3-axis 10-bit accelerometer
+ * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include "mma7455.h"
+
+static int mma7455_spi_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_spi(spi, &mma7455_core_regmap);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	return mma7455_core_probe(&spi->dev, regmap, id->name);
+}
+
+static int mma7455_spi_remove(struct spi_device *spi)
+{
+	return mma7455_core_remove(&spi->dev);
+}
+
+static const struct spi_device_id mma7455_spi_ids[] = {
+	{ "mma7455", 0 },
+	{ "mma7456", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, mma7455_spi_ids);
+
+static struct spi_driver mma7455_spi_driver = {
+	.probe = mma7455_spi_probe,
+	.remove = mma7455_spi_remove,
+	.id_table = mma7455_spi_ids,
+	.driver = {
+		.name = "mma7455-spi",
+	},
+};
+module_spi_driver(mma7455_spi_driver);
+
+MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
+MODULE_DESCRIPTION("Freescale MMA7455L SPI accelerometer driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 1eccc2d..116a6e4 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -29,6 +29,7 @@
 #include <linux/iio/events.h>
 #include <linux/delay.h>
 #include <linux/of_device.h>
+#include <linux/of_irq.h>
 
 #define MMA8452_STATUS				0x00
 #define  MMA8452_STATUS_DRDY			(BIT(2) | BIT(1) | BIT(0))
@@ -1130,13 +1131,21 @@ static int mma8452_probe(struct i2c_client *client,
 					   MMA8452_INT_FF_MT;
 		int enabled_interrupts = MMA8452_INT_TRANS |
 					 MMA8452_INT_FF_MT;
+		int irq2;
 
-		/* Assume wired to INT1 pin */
-		ret = i2c_smbus_write_byte_data(client,
-						MMA8452_CTRL_REG5,
-						supported_interrupts);
-		if (ret < 0)
-			return ret;
+		irq2 = of_irq_get_byname(client->dev.of_node, "INT2");
+
+		if (irq2 == client->irq) {
+			dev_dbg(&client->dev, "using interrupt line INT2\n");
+		} else {
+			ret = i2c_smbus_write_byte_data(client,
+							MMA8452_CTRL_REG5,
+							supported_interrupts);
+			if (ret < 0)
+				return ret;
+
+			dev_dbg(&client->dev, "using interrupt line INT1\n");
+		}
 
 		ret = i2c_smbus_write_byte_data(client,
 						MMA8452_CTRL_REG4,
diff --git a/drivers/iio/accel/mma9551.c b/drivers/iio/accel/mma9551.c
index 7db7cc0..d899a4d 100644
--- a/drivers/iio/accel/mma9551.c
+++ b/drivers/iio/accel/mma9551.c
@@ -495,25 +495,23 @@ static int mma9551_probe(struct i2c_client *client,
 	if (ret < 0)
 		goto out_poweroff;
 
-	ret = iio_device_register(indio_dev);
-	if (ret < 0) {
-		dev_err(&client->dev, "unable to register iio device\n");
-		goto out_poweroff;
-	}
-
 	ret = pm_runtime_set_active(&client->dev);
 	if (ret < 0)
-		goto out_iio_unregister;
+		goto out_poweroff;
 
 	pm_runtime_enable(&client->dev);
 	pm_runtime_set_autosuspend_delay(&client->dev,
 					 MMA9551_AUTO_SUSPEND_DELAY_MS);
 	pm_runtime_use_autosuspend(&client->dev);
 
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(&client->dev, "unable to register iio device\n");
+		goto out_poweroff;
+	}
+
 	return 0;
 
-out_iio_unregister:
-	iio_device_unregister(indio_dev);
 out_poweroff:
 	mma9551_set_device_state(client, false);
 
@@ -525,11 +523,12 @@ static int mma9551_remove(struct i2c_client *client)
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 	struct mma9551_data *data = iio_priv(indio_dev);
 
+	iio_device_unregister(indio_dev);
+
 	pm_runtime_disable(&client->dev);
 	pm_runtime_set_suspended(&client->dev);
 	pm_runtime_put_noidle(&client->dev);
 
-	iio_device_unregister(indio_dev);
 	mutex_lock(&data->mutex);
 	mma9551_set_device_state(data->client, false);
 	mutex_unlock(&data->mutex);
diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c
index 9408ef3..fa7d362 100644
--- a/drivers/iio/accel/mma9553.c
+++ b/drivers/iio/accel/mma9553.c
@@ -1133,27 +1133,24 @@ static int mma9553_probe(struct i2c_client *client,
 		}
 	}
 
-	ret = iio_device_register(indio_dev);
-	if (ret < 0) {
-		dev_err(&client->dev, "unable to register iio device\n");
-		goto out_poweroff;
-	}
-
 	ret = pm_runtime_set_active(&client->dev);
 	if (ret < 0)
-		goto out_iio_unregister;
+		goto out_poweroff;
 
 	pm_runtime_enable(&client->dev);
 	pm_runtime_set_autosuspend_delay(&client->dev,
 					 MMA9551_AUTO_SUSPEND_DELAY_MS);
 	pm_runtime_use_autosuspend(&client->dev);
 
-	dev_dbg(&indio_dev->dev, "Registered device %s\n", name);
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(&client->dev, "unable to register iio device\n");
+		goto out_poweroff;
+	}
 
+	dev_dbg(&indio_dev->dev, "Registered device %s\n", name);
 	return 0;
 
-out_iio_unregister:
-	iio_device_unregister(indio_dev);
 out_poweroff:
 	mma9551_set_device_state(client, false);
 	return ret;
@@ -1164,11 +1161,12 @@ static int mma9553_remove(struct i2c_client *client)
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 	struct mma9553_data *data = iio_priv(indio_dev);
 
+	iio_device_unregister(indio_dev);
+
 	pm_runtime_disable(&client->dev);
 	pm_runtime_set_suspended(&client->dev);
 	pm_runtime_put_noidle(&client->dev);
 
-	iio_device_unregister(indio_dev);
 	mutex_lock(&data->mutex);
 	mma9551_set_device_state(data->client, false);
 	mutex_unlock(&data->mutex);
diff --git a/drivers/iio/accel/mxc6255.c b/drivers/iio/accel/mxc6255.c
new file mode 100644
index 0000000..97ccde7
--- /dev/null
+++ b/drivers/iio/accel/mxc6255.c
@@ -0,0 +1,198 @@
+/*
+ * MXC6255 - MEMSIC orientation sensing accelerometer
+ *
+ * Copyright (c) 2015, Intel Corporation.
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * IIO driver for MXC6255 (7-bit I2C slave address 0x15).
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/iio/iio.h>
+#include <linux/delay.h>
+#include <linux/acpi.h>
+#include <linux/regmap.h>
+#include <linux/iio/sysfs.h>
+
+#define MXC6255_DRV_NAME		"mxc6255"
+#define MXC6255_REGMAP_NAME		"mxc6255_regmap"
+
+#define MXC6255_REG_XOUT		0x00
+#define MXC6255_REG_YOUT		0x01
+#define MXC6255_REG_CHIP_ID		0x08
+
+#define MXC6255_CHIP_ID			0x05
+
+/*
+ * MXC6255 has only one measurement range: +/- 2G.
+ * The acceleration output is an 8-bit value.
+ *
+ * Scale is calculated as follows:
+ * (2 + 2) * 9.80665 / (2^8 - 1) = 0.153829
+ *
+ * Scale value for +/- 2G measurement range
+ */
+#define MXC6255_SCALE			153829
+
+enum mxc6255_axis {
+	AXIS_X,
+	AXIS_Y,
+};
+
+struct mxc6255_data {
+	struct i2c_client *client;
+	struct regmap *regmap;
+};
+
+static int mxc6255_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct mxc6255_data *data = iio_priv(indio_dev);
+	unsigned int reg;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = regmap_read(data->regmap, chan->address, &reg);
+		if (ret < 0) {
+			dev_err(&data->client->dev,
+				"Error reading reg %lu\n", chan->address);
+			return ret;
+		}
+
+		*val = sign_extend32(reg, 7);
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		*val2 = MXC6255_SCALE;
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info mxc6255_info = {
+	.driver_module	= THIS_MODULE,
+	.read_raw	= mxc6255_read_raw,
+};
+
+#define MXC6255_CHANNEL(_axis, reg) {				\
+	.type = IIO_ACCEL,					\
+	.modified = 1,						\
+	.channel2 = IIO_MOD_##_axis,				\
+	.address = reg,						\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+}
+
+static const struct iio_chan_spec mxc6255_channels[] = {
+	MXC6255_CHANNEL(X, MXC6255_REG_XOUT),
+	MXC6255_CHANNEL(Y, MXC6255_REG_YOUT),
+};
+
+static bool mxc6255_is_readable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case MXC6255_REG_XOUT:
+	case MXC6255_REG_YOUT:
+	case MXC6255_REG_CHIP_ID:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config mxc6255_regmap_config = {
+	.name = MXC6255_REGMAP_NAME,
+
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.readable_reg = mxc6255_is_readable_reg,
+};
+
+static int mxc6255_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct mxc6255_data *data;
+	struct iio_dev *indio_dev;
+	struct regmap *regmap;
+	unsigned int chip_id;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	regmap = devm_regmap_init_i2c(client, &mxc6255_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Error initializing regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+	data->regmap = regmap;
+
+	indio_dev->name = MXC6255_DRV_NAME;
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->channels = mxc6255_channels;
+	indio_dev->num_channels = ARRAY_SIZE(mxc6255_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &mxc6255_info;
+
+	ret = regmap_read(data->regmap, MXC6255_REG_CHIP_ID, &chip_id);
+	if (ret < 0) {
+		dev_err(&client->dev, "Error reading chip id %d\n", ret);
+		return ret;
+	}
+
+	if (chip_id != MXC6255_CHIP_ID) {
+		dev_err(&client->dev, "Invalid chip id %x\n", chip_id);
+		return -ENODEV;
+	}
+
+	dev_dbg(&client->dev, "Chip id %x\n", chip_id);
+
+	ret = devm_iio_device_register(&client->dev, indio_dev);
+	if (ret < 0) {
+		dev_err(&client->dev, "Could not register IIO device\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct acpi_device_id mxc6255_acpi_match[] = {
+	{"MXC6255",	0},
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, mxc6255_acpi_match);
+
+static const struct i2c_device_id mxc6255_id[] = {
+	{"mxc6255",	0},
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mxc6255_id);
+
+static struct i2c_driver mxc6255_driver = {
+	.driver = {
+		.name = MXC6255_DRV_NAME,
+		.acpi_match_table = ACPI_PTR(mxc6255_acpi_match),
+	},
+	.probe		= mxc6255_probe,
+	.id_table	= mxc6255_id,
+};
+
+module_i2c_driver(mxc6255_driver);
+
+MODULE_AUTHOR("Teodora Baluta <teodora.baluta@intel.com>");
+MODULE_DESCRIPTION("MEMSIC MXC6255 orientation sensing accelerometer driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
index 468f21f..5d4a189 100644
--- a/drivers/iio/accel/st_accel.h
+++ b/drivers/iio/accel/st_accel.h
@@ -27,6 +27,7 @@
 #define LSM303DLM_ACCEL_DEV_NAME	"lsm303dlm_accel"
 #define LSM330_ACCEL_DEV_NAME		"lsm330_accel"
 #define LSM303AGR_ACCEL_DEV_NAME	"lsm303agr_accel"
+#define LIS2DH12_ACCEL_DEV_NAME		"lis2dh12_accel"
 
 /**
 * struct st_sensors_platform_data - default accel platform data
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 197a08b..70f0427 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -232,6 +232,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			[3] = LSM330DL_ACCEL_DEV_NAME,
 			[4] = LSM330DLC_ACCEL_DEV_NAME,
 			[5] = LSM303AGR_ACCEL_DEV_NAME,
+			[6] = LIS2DH12_ACCEL_DEV_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
 		.odr = {
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
index 8b9cc84..294a32f 100644
--- a/drivers/iio/accel/st_accel_i2c.c
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -72,6 +72,10 @@ static const struct of_device_id st_accel_of_match[] = {
 		.compatible = "st,lsm303agr-accel",
 		.data = LSM303AGR_ACCEL_DEV_NAME,
 	},
+	{
+		.compatible = "st,lis2dh12-accel",
+		.data = LIS2DH12_ACCEL_DEV_NAME,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_accel_of_match);
@@ -121,6 +125,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
 	{ LSM303DLM_ACCEL_DEV_NAME },
 	{ LSM330_ACCEL_DEV_NAME },
 	{ LSM303AGR_ACCEL_DEV_NAME },
+	{ LIS2DH12_ACCEL_DEV_NAME },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
index f71b0d3..fcd5847 100644
--- a/drivers/iio/accel/st_accel_spi.c
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -58,6 +58,7 @@ static const struct spi_device_id st_accel_id_table[] = {
 	{ LSM303DLM_ACCEL_DEV_NAME },
 	{ LSM330_ACCEL_DEV_NAME },
 	{ LSM303AGR_ACCEL_DEV_NAME },
+	{ LIS2DH12_ACCEL_DEV_NAME },
 	{},
 };
 MODULE_DEVICE_TABLE(spi, st_accel_id_table);