diff options
author | Adriana Reus <adriana.reus@intel.com> | 2016-02-12 11:44:43 (GMT) |
---|---|---|
committer | Jonathan Cameron <jic23@kernel.org> | 2016-02-13 20:53:50 (GMT) |
commit | d430f3c36ca6e71f30c00757f5d43ca83b890ff4 (patch) | |
tree | f6d278c2b779a6749334f128d6f70f22b5342ce0 /drivers/iio/imu | |
parent | c278ac0ecd198a3a1be5b2f1159ffec2e3107ecb (diff) | |
download | linux-d430f3c36ca6e71f30c00757f5d43ca83b890ff4.tar.xz |
iio: imu: inv_mpu6050: Use regmap instead of i2c specific functions
Use regmap instead of i2c specific functions.
This is in preparation of splitting this driver into core and
i2c specific functionality.
Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Acked-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Diffstat (limited to 'drivers/iio/imu')
-rw-r--r-- | drivers/iio/imu/inv_mpu6050/Kconfig | 1 | ||||
-rw-r--r-- | drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 71 | ||||
-rw-r--r-- | drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 2 | ||||
-rw-r--r-- | drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 30 | ||||
-rw-r--r-- | drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 6 |
5 files changed, 57 insertions, 53 deletions
diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig index 48fbc0b..f301f3a 100644 --- a/drivers/iio/imu/inv_mpu6050/Kconfig +++ b/drivers/iio/imu/inv_mpu6050/Kconfig @@ -8,6 +8,7 @@ config INV_MPU6050_IIO select IIO_BUFFER select IIO_TRIGGERED_BUFFER select I2C_MUX + select REGMAP_I2C help This driver supports the Invensense MPU6050 devices. This driver can also support MPU6500 in MPU6050 compatibility mode diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index 1121f4e..151a378 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -27,6 +27,11 @@ #include <linux/acpi.h> #include "inv_mpu_iio.h" +static const struct regmap_config inv_mpu_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + /* * this is the gyro scale translated from dynamic range plus/minus * {250, 500, 1000, 2000} to rad/s @@ -75,11 +80,6 @@ static const struct inv_mpu6050_hw hw_info[INV_NUM_PARTS] = { }, }; -int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 d) -{ - return i2c_smbus_write_i2c_block_data(st->client, reg, 1, &d); -} - /* * The i2c read/write needs to happen in unlocked mode. As the parent * adapter is common. If we use locked versions, it will fail as @@ -159,16 +159,15 @@ static int inv_mpu6050_deselect_bypass(struct i2c_adapter *adap, int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask) { - u8 d, mgmt_1; + unsigned int d, mgmt_1; int result; /* switch clock needs to be careful. Only when gyro is on, can clock source be switched to gyro. Otherwise, it must be set to internal clock */ if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) { - result = i2c_smbus_read_i2c_block_data(st->client, - st->reg->pwr_mgmt_1, 1, &mgmt_1); - if (result != 1) + result = regmap_read(st->map, st->reg->pwr_mgmt_1, &mgmt_1); + if (result) return result; mgmt_1 &= ~INV_MPU6050_BIT_CLK_MASK; @@ -178,20 +177,19 @@ int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask) /* turning off gyro requires switch to internal clock first. Then turn off gyro engine */ mgmt_1 |= INV_CLK_INTERNAL; - result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1, mgmt_1); + result = regmap_write(st->map, st->reg->pwr_mgmt_1, mgmt_1); if (result) return result; } - result = i2c_smbus_read_i2c_block_data(st->client, - st->reg->pwr_mgmt_2, 1, &d); - if (result != 1) + result = regmap_read(st->map, st->reg->pwr_mgmt_2, &d); + if (result) return result; if (en) d &= ~mask; else d |= mask; - result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_2, d); + result = regmap_write(st->map, st->reg->pwr_mgmt_2, d); if (result) return result; @@ -201,7 +199,7 @@ int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask) if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) { /* switch internal clock to PLL */ mgmt_1 |= INV_CLK_PLL; - result = inv_mpu6050_write_reg(st, + result = regmap_write(st->map, st->reg->pwr_mgmt_1, mgmt_1); if (result) return result; @@ -218,15 +216,14 @@ int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on) if (power_on) { /* Already under indio-dev->mlock mutex */ if (!st->powerup_count) - result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1, - 0); + result = regmap_write(st->map, st->reg->pwr_mgmt_1, 0); if (!result) st->powerup_count++; } else { st->powerup_count--; if (!st->powerup_count) - result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1, - INV_MPU6050_BIT_SLEEP); + result = regmap_write(st->map, st->reg->pwr_mgmt_1, + INV_MPU6050_BIT_SLEEP); } if (result) @@ -257,22 +254,22 @@ static int inv_mpu6050_init_config(struct iio_dev *indio_dev) if (result) return result; d = (INV_MPU6050_FSR_2000DPS << INV_MPU6050_GYRO_CONFIG_FSR_SHIFT); - result = inv_mpu6050_write_reg(st, st->reg->gyro_config, d); + result = regmap_write(st->map, st->reg->gyro_config, d); if (result) return result; d = INV_MPU6050_FILTER_20HZ; - result = inv_mpu6050_write_reg(st, st->reg->lpf, d); + result = regmap_write(st->map, st->reg->lpf, d); if (result) return result; d = INV_MPU6050_ONE_K_HZ / INV_MPU6050_INIT_FIFO_RATE - 1; - result = inv_mpu6050_write_reg(st, st->reg->sample_rate_div, d); + result = regmap_write(st->map, st->reg->sample_rate_div, d); if (result) return result; d = (INV_MPU6050_FS_02G << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT); - result = inv_mpu6050_write_reg(st, st->reg->accl_config, d); + result = regmap_write(st->map, st->reg->accl_config, d); if (result) return result; @@ -290,9 +287,8 @@ static int inv_mpu6050_sensor_show(struct inv_mpu6050_state *st, int reg, __be16 d; ind = (axis - IIO_MOD_X) * 2; - result = i2c_smbus_read_i2c_block_data(st->client, reg + ind, 2, - (u8 *)&d); - if (result != 2) + result = regmap_bulk_read(st->map, reg + ind, (u8 *)&d, 2); + if (result) return -EINVAL; *val = (short)be16_to_cpup(&d); @@ -418,8 +414,7 @@ static int inv_mpu6050_write_gyro_scale(struct inv_mpu6050_state *st, int val) for (i = 0; i < ARRAY_SIZE(gyro_scale_6050); ++i) { if (gyro_scale_6050[i] == val) { d = (i << INV_MPU6050_GYRO_CONFIG_FSR_SHIFT); - result = inv_mpu6050_write_reg(st, - st->reg->gyro_config, d); + result = regmap_write(st->map, st->reg->gyro_config, d); if (result) return result; @@ -456,8 +451,7 @@ static int inv_mpu6050_write_accel_scale(struct inv_mpu6050_state *st, int val) for (i = 0; i < ARRAY_SIZE(accel_scale); ++i) { if (accel_scale[i] == val) { d = (i << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT); - result = inv_mpu6050_write_reg(st, - st->reg->accl_config, d); + result = regmap_write(st->map, st->reg->accl_config, d); if (result) return result; @@ -537,7 +531,7 @@ static int inv_mpu6050_set_lpf(struct inv_mpu6050_state *st, int rate) while ((h < hz[i]) && (i < ARRAY_SIZE(d) - 1)) i++; data = d[i]; - result = inv_mpu6050_write_reg(st, st->reg->lpf, data); + result = regmap_write(st->map, st->reg->lpf, data); if (result) return result; st->chip_config.lpf = data; @@ -575,7 +569,7 @@ static ssize_t inv_mpu6050_fifo_rate_store(struct device *dev, goto fifo_rate_fail; d = INV_MPU6050_ONE_K_HZ / fifo_rate - 1; - result = inv_mpu6050_write_reg(st, st->reg->sample_rate_div, d); + result = regmap_write(st->map, st->reg->sample_rate_div, d); if (result) goto fifo_rate_fail; st->chip_config.fifo_rate = fifo_rate; @@ -736,8 +730,8 @@ static int inv_check_and_setup_chip(struct inv_mpu6050_state *st) st->reg = hw_info[st->chip_type].reg; /* reset to make sure previous state are not there */ - result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1, - INV_MPU6050_BIT_H_RESET); + result = regmap_write(st->map, st->reg->pwr_mgmt_1, + INV_MPU6050_BIT_H_RESET); if (result) return result; msleep(INV_MPU6050_POWER_UP_TIME); @@ -778,11 +772,19 @@ static int inv_mpu_probe(struct i2c_client *client, struct iio_dev *indio_dev; struct inv_mpu6050_platform_data *pdata; int result; + struct regmap *regmap; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) return -ENOSYS; + regmap = devm_regmap_init_i2c(client, &inv_mpu_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "Failed to register i2c regmap %d\n", + (int)PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st)); if (!indio_dev) return -ENOMEM; @@ -790,6 +792,7 @@ static int inv_mpu_probe(struct i2c_client *client, st = iio_priv(indio_dev); st->client = client; st->powerup_count = 0; + st->map = regmap; pdata = dev_get_platdata(&client->dev); if (pdata) st->plat_data = *pdata; diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h index 455b99d..469cd1f 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h @@ -15,6 +15,7 @@ #include <linux/spinlock.h> #include <linux/iio/iio.h> #include <linux/iio/buffer.h> +#include <linux/regmap.h> #include <linux/iio/sysfs.h> #include <linux/iio/kfifo_buf.h> #include <linux/iio/trigger.h> @@ -125,6 +126,7 @@ struct inv_mpu6050_state { unsigned int powerup_count; struct inv_mpu6050_platform_data plat_data; DECLARE_KFIFO(timestamps, long long, TIMESTAMP_FIFO_SIZE); + struct regmap *map; }; /*register and associated bit definition*/ diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c index ba27e27..eb19dae 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c @@ -13,7 +13,6 @@ #include <linux/module.h> #include <linux/slab.h> -#include <linux/i2c.h> #include <linux/err.h> #include <linux/delay.h> #include <linux/sysfs.h> @@ -41,22 +40,22 @@ int inv_reset_fifo(struct iio_dev *indio_dev) struct inv_mpu6050_state *st = iio_priv(indio_dev); /* disable interrupt */ - result = inv_mpu6050_write_reg(st, st->reg->int_enable, 0); + result = regmap_write(st->map, st->reg->int_enable, 0); if (result) { dev_err(&st->client->dev, "int_enable failed %d\n", result); return result; } /* disable the sensor output to FIFO */ - result = inv_mpu6050_write_reg(st, st->reg->fifo_en, 0); + result = regmap_write(st->map, st->reg->fifo_en, 0); if (result) goto reset_fifo_fail; /* disable fifo reading */ - result = inv_mpu6050_write_reg(st, st->reg->user_ctrl, 0); + result = regmap_write(st->map, st->reg->user_ctrl, 0); if (result) goto reset_fifo_fail; /* reset FIFO*/ - result = inv_mpu6050_write_reg(st, st->reg->user_ctrl, + result = regmap_write(st->map, st->reg->user_ctrl, INV_MPU6050_BIT_FIFO_RST); if (result) goto reset_fifo_fail; @@ -67,13 +66,13 @@ int inv_reset_fifo(struct iio_dev *indio_dev) /* enable interrupt */ if (st->chip_config.accl_fifo_enable || st->chip_config.gyro_fifo_enable) { - result = inv_mpu6050_write_reg(st, st->reg->int_enable, + result = regmap_write(st->map, st->reg->int_enable, INV_MPU6050_BIT_DATA_RDY_EN); if (result) return result; } /* enable FIFO reading and I2C master interface*/ - result = inv_mpu6050_write_reg(st, st->reg->user_ctrl, + result = regmap_write(st->map, st->reg->user_ctrl, INV_MPU6050_BIT_FIFO_EN); if (result) goto reset_fifo_fail; @@ -83,7 +82,7 @@ int inv_reset_fifo(struct iio_dev *indio_dev) d |= INV_MPU6050_BITS_GYRO_OUT; if (st->chip_config.accl_fifo_enable) d |= INV_MPU6050_BIT_ACCEL_OUT; - result = inv_mpu6050_write_reg(st, st->reg->fifo_en, d); + result = regmap_write(st->map, st->reg->fifo_en, d); if (result) goto reset_fifo_fail; @@ -91,7 +90,7 @@ int inv_reset_fifo(struct iio_dev *indio_dev) reset_fifo_fail: dev_err(&st->client->dev, "reset fifo failed %d\n", result); - result = inv_mpu6050_write_reg(st, st->reg->int_enable, + result = regmap_write(st->map, st->reg->int_enable, INV_MPU6050_BIT_DATA_RDY_EN); return result; @@ -143,10 +142,10 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) * read fifo_count register to know how many bytes inside FIFO * right now */ - result = i2c_smbus_read_i2c_block_data(st->client, + result = regmap_bulk_read(st->map, st->reg->fifo_count_h, - INV_MPU6050_FIFO_COUNT_BYTE, data); - if (result != INV_MPU6050_FIFO_COUNT_BYTE) + data, INV_MPU6050_FIFO_COUNT_BYTE); + if (result) goto end_session; fifo_count = be16_to_cpup((__be16 *)(&data[0])); if (fifo_count < bytes_per_datum) @@ -161,10 +160,9 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) fifo_count / bytes_per_datum + INV_MPU6050_TIME_STAMP_TOR) goto flush_fifo; while (fifo_count >= bytes_per_datum) { - result = i2c_smbus_read_i2c_block_data(st->client, - st->reg->fifo_r_w, - bytes_per_datum, data); - if (result != bytes_per_datum) + result = regmap_bulk_read(st->map, st->reg->fifo_r_w, + data, bytes_per_datum); + if (result) goto flush_fifo; result = kfifo_out(&st->timestamps, ×tamp, 1); diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c index 844610c..ee9e66d 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c @@ -65,15 +65,15 @@ static int inv_mpu6050_set_enable(struct iio_dev *indio_dev, bool enable) if (result) return result; } else { - result = inv_mpu6050_write_reg(st, st->reg->fifo_en, 0); + result = regmap_write(st->map, st->reg->fifo_en, 0); if (result) return result; - result = inv_mpu6050_write_reg(st, st->reg->int_enable, 0); + result = regmap_write(st->map, st->reg->int_enable, 0); if (result) return result; - result = inv_mpu6050_write_reg(st, st->reg->user_ctrl, 0); + result = regmap_write(st->map, st->reg->user_ctrl, 0); if (result) return result; |