Merge tag 'iio-for-4.3b-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of new device support, features and cleanup for the 4.3 cycle.
Take 2 also includes a fix set that was too late for the 4.2 cycle.

As we had a lot of tools and docs work in this set, I have broken those
out into their own categories in this description.

Fixes from the pull request '4th set of IIO fixes for the 4.2 cycle'.
* Poll functions for both event chardev and the buffer one were returning
  negative error codes (via a positive value).
* A recent change to lsiio adding some error handling that was wrong and
  stopped the tool working.
* bmg160 was missing some dependencies in Kconfig
* berlin2-adc had a misshandled register (wrote a value rather than a bitmap)

New device support
* TI opt3001 light sensor
* TXC PA12 ALS and proximity sensor.
* mcp3301 ADC support (in mcp320x driver)
* ST lsm303agr accelerometer and magnetometer drivers (plus some st-sensors
  common support to allow different WHOAMI register addresses, devices with
  fixed scale and allow interrupt equiped magnetometers).
* ADIS16305, ADIS16367, ADIS16445IMUs (in the adis16400 driver)
* ADIS16266 gyro (in the adis16260 driver)
* ADIS16137 gyro (in the adis16136 driver)

New functionality
* mmc35240 DT bindings.
* Inverse unit conversion macros to aid handing of values written to sysfs
  attributes.

Core cleanup
* Forward declaration of struct iio_trigger to avoid a compile warning.

Driver cleanup / fixes
* mxs-lradc
  - Clarify which parts are supported.
  - Fix spelling erorrs.
  - Missing/extra includes
  - reorder includes
  - add datasheet name listings for all usable channels (to allow them
    to be bound by name from consumer drivers)
* acpi-als - add some function prefixes as per general iio style.
* bmc150_magn - replace a magic value with the existing define.
* vf610 - determine possible sample frequencies taking into account the
  electrical characteristics (defining a minimum sample time)
* dht11
  - whitespace
  - additional docs
  - avoid mulitple assignments in one line
  - Use the new funciton ktime_get_resolution_ns to cleanup a nasty trick
    previously used for timing.
* Fix all drivers that consider 0 a valid IRQ for historical reasons.
* Export I2C module alias info where previously missing (to allow autoprobing)
* Export OF module alias info where previously missing.
* mmc35240 - switch some variables into arrays to improve readability.
* mlx90614 - define some magic numbers for readability.
* bmc150_magn
  - expand area locked by a mutex to cover all the use of the
    data->buffer.
  - use descriptive naming for a mask instead of a magic value.
* berin2-adc
  - pass up an error code rather that a generic error
  - constify the iio_chan_spec
  - some other little tidy ups.
* stk8312
  - fix a dependency on triggered buffers in kconfig
  - add a check for invalid attribute values
  - improve error handling by returning error codes where possible and
    return immediately where relevant
  - rework macro defs to use GENMASK etc
  - change some variable types to reduce unnecessary casting
  - clean up code style
  - drop a local buffer copy for bulk reads and use the one in data->buffer
     instead.
* adis16400 - the adis16448 gyroscope scale was wrong.
* adis16480 - some more wrong scales for various parts.
* adis16300 - has an undocumented product id and serial number registers so
  use them.
* iio_simple_dummy - fix some wrong code indentation.
* bmc150-accel - use the chip ID to detect the chip present rather than
  verifying the expected part was there.  This was in response to a wrong
  ACPI entry on the WinBook TW100.
* mma8452
  - fix _get_hp_filter_index
  - drop a double include
  - pass up an error code rather than rewriting it
  - range check input values to attribute writes
  - register defs tidy up using GENMASK and reordering them to be easier to
    follow.
  - various coding style cleanups
  - put the Kconfig entry in the write place (alphabetically).

Tools related
* Tools cleanup - drop an explicity NULL comparison, some unnecessary braces,
  use the ARRAY_SIZE macro, send error messages to stderr instead of dropping
  them in the middle of normal output.
* Fix tools to allow that scale and offset attributes are optional.
* More tools fixes including allowing true 32bit data (previously an overflow
  prevented more than 31bits)
* Drop a stray header guard that ended up in a c file.
* Make calc_digits static as it isn't exported or in the header.
* Set ci_array pointer to NULL after free as a protection against non safe
  usage of the tools core code.  Also convert a double pointer to a single
  one as the extra level of indirection was unnecessary.

Docs
* DocBook introduction by Daniel Baluta.  Glad we are beginning to
  draw together some more introductory docs to suplement the various
  tools / examples.
* Drop bytes_per_datum sysfs attribute docs as it no longer exists.
* A whole load of missing / fixing of kernel-doc for the core of IIO.
* Document the trigger name sysfs attribute in the ABI docs.
* Minor typos in the ABI docs related to power down modes.

1 files changed, 97 insertions, 1 deletions

diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index b4bcfb7..f8dc4b8 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -43,6 +43,7 @@
 #define ST_MAGN_FS_AVL_8000MG			8000
 #define ST_MAGN_FS_AVL_8100MG			8100
 #define ST_MAGN_FS_AVL_12000MG			12000
+#define ST_MAGN_FS_AVL_15000MG			15000
 #define ST_MAGN_FS_AVL_16000MG			16000
 
 /* CUSTOM VALUES FOR SENSOR 0 */
@@ -157,6 +158,29 @@
 #define ST_MAGN_2_OUT_Y_L_ADDR			0x2a
 #define ST_MAGN_2_OUT_Z_L_ADDR			0x2c
 
+/* CUSTOM VALUES FOR SENSOR 3 */
+#define ST_MAGN_3_WAI_ADDR			0x4f
+#define ST_MAGN_3_WAI_EXP			0x40
+#define ST_MAGN_3_ODR_ADDR			0x60
+#define ST_MAGN_3_ODR_MASK			0x0c
+#define ST_MAGN_3_ODR_AVL_10HZ_VAL		0x00
+#define ST_MAGN_3_ODR_AVL_20HZ_VAL		0x01
+#define ST_MAGN_3_ODR_AVL_50HZ_VAL		0x02
+#define ST_MAGN_3_ODR_AVL_100HZ_VAL		0x03
+#define ST_MAGN_3_PW_ADDR			0x60
+#define ST_MAGN_3_PW_MASK			0x03
+#define ST_MAGN_3_PW_ON				0x00
+#define ST_MAGN_3_PW_OFF			0x03
+#define ST_MAGN_3_BDU_ADDR			0x62
+#define ST_MAGN_3_BDU_MASK			0x10
+#define ST_MAGN_3_DRDY_IRQ_ADDR			0x62
+#define ST_MAGN_3_DRDY_INT_MASK			0x01
+#define ST_MAGN_3_FS_AVL_15000_GAIN		1500
+#define ST_MAGN_3_MULTIREAD_BIT			false
+#define ST_MAGN_3_OUT_X_L_ADDR			0x68
+#define ST_MAGN_3_OUT_Y_L_ADDR			0x6a
+#define ST_MAGN_3_OUT_Z_L_ADDR			0x6c
+
 static const struct iio_chan_spec st_magn_16bit_channels[] = {
 	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
@@ -189,9 +213,26 @@ static const struct iio_chan_spec st_magn_2_16bit_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };
 
+static const struct iio_chan_spec st_magn_3_16bit_channels[] = {
+	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
+			ST_MAGN_3_OUT_X_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
+			ST_MAGN_3_OUT_Y_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
+			ST_MAGN_3_OUT_Z_L_ADDR),
+	IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
 static const struct st_sensor_settings st_magn_sensors_settings[] = {
 	{
 		.wai = 0, /* This sensor has no valid WhoAmI report 0 */
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LSM303DLH_MAGN_DEV_NAME,
 		},
@@ -268,6 +309,7 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
 	},
 	{
 		.wai = ST_MAGN_1_WAI_EXP,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LSM303DLHC_MAGN_DEV_NAME,
 			[1] = LSM303DLM_MAGN_DEV_NAME,
@@ -346,6 +388,7 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
 	},
 	{
 		.wai = ST_MAGN_2_WAI_EXP,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LIS3MDL_MAGN_DEV_NAME,
 		},
@@ -399,6 +442,48 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
 		.multi_read_bit = ST_MAGN_2_MULTIREAD_BIT,
 		.bootime = 2,
 	},
+	{
+		.wai = ST_MAGN_3_WAI_EXP,
+		.wai_addr = ST_MAGN_3_WAI_ADDR,
+		.sensors_supported = {
+			[0] = LSM303AGR_MAGN_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_magn_3_16bit_channels,
+		.odr = {
+			.addr = ST_MAGN_3_ODR_ADDR,
+			.mask = ST_MAGN_3_ODR_MASK,
+			.odr_avl = {
+				{ 10, ST_MAGN_3_ODR_AVL_10HZ_VAL, },
+				{ 20, ST_MAGN_3_ODR_AVL_20HZ_VAL, },
+				{ 50, ST_MAGN_3_ODR_AVL_50HZ_VAL, },
+				{ 100, ST_MAGN_3_ODR_AVL_100HZ_VAL, },
+			},
+		},
+		.pw = {
+			.addr = ST_MAGN_3_PW_ADDR,
+			.mask = ST_MAGN_3_PW_MASK,
+			.value_on = ST_MAGN_3_PW_ON,
+			.value_off = ST_MAGN_3_PW_OFF,
+		},
+		.fs = {
+			.fs_avl = {
+				[0] = {
+					.num = ST_MAGN_FS_AVL_15000MG,
+					.gain = ST_MAGN_3_FS_AVL_15000_GAIN,
+				},
+			},
+		},
+		.bdu = {
+			.addr = ST_MAGN_3_BDU_ADDR,
+			.mask = ST_MAGN_3_BDU_MASK,
+		},
+		.drdy_irq = {
+			.addr = ST_MAGN_3_DRDY_IRQ_ADDR,
+			.mask_int1 = ST_MAGN_3_DRDY_INT_MASK,
+		},
+		.multi_read_bit = ST_MAGN_3_MULTIREAD_BIT,
+		.bootime = 2,
+	},
 };
 
 static int st_magn_read_raw(struct iio_dev *indio_dev,
@@ -477,6 +562,16 @@ static const struct iio_info magn_info = {
 	.write_raw = &st_magn_write_raw,
 };
 
+#ifdef CONFIG_IIO_TRIGGER
+static const struct iio_trigger_ops st_magn_trigger_ops = {
+	.owner = THIS_MODULE,
+	.set_trigger_state = ST_MAGN_TRIGGER_SET_STATE,
+};
+#define ST_MAGN_TRIGGER_OPS (&st_magn_trigger_ops)
+#else
+#define ST_MAGN_TRIGGER_OPS NULL
+#endif
+
 int st_magn_common_probe(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *mdata = iio_priv(indio_dev);
@@ -513,7 +608,8 @@ int st_magn_common_probe(struct iio_dev *indio_dev)
 		return err;
 
 	if (irq > 0) {
-		err = st_sensors_allocate_trigger(indio_dev, NULL);
+		err = st_sensors_allocate_trigger(indio_dev,
+						ST_MAGN_TRIGGER_OPS);
 		if (err < 0)
 			goto st_magn_probe_trigger_error;
 	}