IB/ipath: Deprecate ipath driver and move to staging.

It is now time for the ipath driver to begin to be phased out of the kernel.
This patch moves the ipath driver from the Infiniband sub tree to the staging
area where it will remain until the code is removed from the kernel in a few
releases.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

1 files changed, 0 insertions, 1183 deletions

diff --git a/drivers/infiniband/hw/ipath/ipath_eeprom.c b/drivers/infiniband/hw/ipath/ipath_eeprom.c
deleted file mode 100644
index fc71819..0000000
--- a/drivers/infiniband/hw/ipath/ipath_eeprom.c
+++ /dev/null
@@ -1,1183 +0,0 @@
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/vmalloc.h>
-
-#include "ipath_kernel.h"
-
-/*
- * InfiniPath I2C driver for a serial eeprom.  This is not a generic
- * I2C interface.  For a start, the device we're using (Atmel AT24C11)
- * doesn't work like a regular I2C device.  It looks like one
- * electrically, but not logically.  Normal I2C devices have a single
- * 7-bit or 10-bit I2C address that they respond to.  Valid 7-bit
- * addresses range from 0x03 to 0x77.  Addresses 0x00 to 0x02 and 0x78
- * to 0x7F are special reserved addresses (e.g. 0x00 is the "general
- * call" address.)  The Atmel device, on the other hand, responds to ALL
- * 7-bit addresses.  It's designed to be the only device on a given I2C
- * bus.  A 7-bit address corresponds to the memory address within the
- * Atmel device itself.
- *
- * Also, the timing requirements mean more than simple software
- * bitbanging, with readbacks from chip to ensure timing (simple udelay
- * is not enough).
- *
- * This all means that accessing the device is specialized enough
- * that using the standard kernel I2C bitbanging interface would be
- * impossible.  For example, the core I2C eeprom driver expects to find
- * a device at one or more of a limited set of addresses only.  It doesn't
- * allow writing to an eeprom.  It also doesn't provide any means of
- * accessing eeprom contents from within the kernel, only via sysfs.
- */
-
-/* Added functionality for IBA7220-based cards */
-#define IPATH_EEPROM_DEV_V1 0xA0
-#define IPATH_EEPROM_DEV_V2 0xA2
-#define IPATH_TEMP_DEV 0x98
-#define IPATH_BAD_DEV (IPATH_EEPROM_DEV_V2+2)
-#define IPATH_NO_DEV (0xFF)
-
-/*
- * The number of I2C chains is proliferating. Table below brings
- * some order to the madness. The basic principle is that the
- * table is scanned from the top, and a "probe" is made to the
- * device probe_dev. If that succeeds, the chain is considered
- * to be of that type, and dd->i2c_chain_type is set to the index+1
- * of the entry.
- * The +1 is so static initialization can mean "unknown, do probe."
- */
-static struct i2c_chain_desc {
-	u8 probe_dev;	/* If seen at probe, chain is this type */
-	u8 eeprom_dev;	/* Dev addr (if any) for EEPROM */
-	u8 temp_dev;	/* Dev Addr (if any) for Temp-sense */
-} i2c_chains[] = {
-	{ IPATH_BAD_DEV, IPATH_NO_DEV, IPATH_NO_DEV }, /* pre-iba7220 bds */
-	{ IPATH_EEPROM_DEV_V1, IPATH_EEPROM_DEV_V1, IPATH_TEMP_DEV}, /* V1 */
-	{ IPATH_EEPROM_DEV_V2, IPATH_EEPROM_DEV_V2, IPATH_TEMP_DEV}, /* V2 */
-	{ IPATH_NO_DEV }
-};
-
-enum i2c_type {
-	i2c_line_scl = 0,
-	i2c_line_sda
-};
-
-enum i2c_state {
-	i2c_line_low = 0,
-	i2c_line_high
-};
-
-#define READ_CMD 1
-#define WRITE_CMD 0
-
-/**
- * i2c_gpio_set - set a GPIO line
- * @dd: the infinipath device
- * @line: the line to set
- * @new_line_state: the state to set
- *
- * Returns 0 if the line was set to the new state successfully, non-zero
- * on error.
- */
-static int i2c_gpio_set(struct ipath_devdata *dd,
-			enum i2c_type line,
-			enum i2c_state new_line_state)
-{
-	u64 out_mask, dir_mask, *gpioval;
-	unsigned long flags = 0;
-
-	gpioval = &dd->ipath_gpio_out;
-
-	if (line == i2c_line_scl) {
-		dir_mask = dd->ipath_gpio_scl;
-		out_mask = (1UL << dd->ipath_gpio_scl_num);
-	} else {
-		dir_mask = dd->ipath_gpio_sda;
-		out_mask = (1UL << dd->ipath_gpio_sda_num);
-	}
-
-	spin_lock_irqsave(&dd->ipath_gpio_lock, flags);
-	if (new_line_state == i2c_line_high) {
-		/* tri-state the output rather than force high */
-		dd->ipath_extctrl &= ~dir_mask;
-	} else {
-		/* config line to be an output */
-		dd->ipath_extctrl |= dir_mask;
-	}
-	ipath_write_kreg(dd, dd->ipath_kregs->kr_extctrl, dd->ipath_extctrl);
-
-	/* set output as well (no real verify) */
-	if (new_line_state == i2c_line_high)
-		*gpioval |= out_mask;
-	else
-		*gpioval &= ~out_mask;
-
-	ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_out, *gpioval);
-	spin_unlock_irqrestore(&dd->ipath_gpio_lock, flags);
-
-	return 0;
-}
-
-/**
- * i2c_gpio_get - get a GPIO line state
- * @dd: the infinipath device
- * @line: the line to get
- * @curr_statep: where to put the line state
- *
- * Returns 0 if the line was set to the new state successfully, non-zero
- * on error.  curr_state is not set on error.
- */
-static int i2c_gpio_get(struct ipath_devdata *dd,
-			enum i2c_type line,
-			enum i2c_state *curr_statep)
-{
-	u64 read_val, mask;
-	int ret;
-	unsigned long flags = 0;
-
-	/* check args */
-	if (curr_statep == NULL) {
-		ret = 1;
-		goto bail;
-	}
-
-	/* config line to be an input */
-	if (line == i2c_line_scl)
-		mask = dd->ipath_gpio_scl;
-	else
-		mask = dd->ipath_gpio_sda;
-
-	spin_lock_irqsave(&dd->ipath_gpio_lock, flags);
-	dd->ipath_extctrl &= ~mask;
-	ipath_write_kreg(dd, dd->ipath_kregs->kr_extctrl, dd->ipath_extctrl);
-	/*
-	 * Below is very unlikely to reflect true input state if Output
-	 * Enable actually changed.
-	 */
-	read_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extstatus);
-	spin_unlock_irqrestore(&dd->ipath_gpio_lock, flags);
-
-	if (read_val & mask)
-		*curr_statep = i2c_line_high;
-	else
-		*curr_statep = i2c_line_low;
-
-	ret = 0;
-
-bail:
-	return ret;
-}
-
-/**
- * i2c_wait_for_writes - wait for a write
- * @dd: the infinipath device
- *
- * We use this instead of udelay directly, so we can make sure
- * that previous register writes have been flushed all the way
- * to the chip.  Since we are delaying anyway, the cost doesn't
- * hurt, and makes the bit twiddling more regular
- */
-static void i2c_wait_for_writes(struct ipath_devdata *dd)
-{
-	(void)ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
-	rmb();
-}
-
-static void scl_out(struct ipath_devdata *dd, u8 bit)
-{
-	udelay(1);
-	i2c_gpio_set(dd, i2c_line_scl, bit ? i2c_line_high : i2c_line_low);
-
-	i2c_wait_for_writes(dd);
-}
-
-static void sda_out(struct ipath_devdata *dd, u8 bit)
-{
-	i2c_gpio_set(dd, i2c_line_sda, bit ? i2c_line_high : i2c_line_low);
-
-	i2c_wait_for_writes(dd);
-}
-
-static u8 sda_in(struct ipath_devdata *dd, int wait)
-{
-	enum i2c_state bit;
-
-	if (i2c_gpio_get(dd, i2c_line_sda, &bit))
-		ipath_dbg("get bit failed!\n");
-
-	if (wait)
-		i2c_wait_for_writes(dd);
-
-	return bit == i2c_line_high ? 1U : 0;
-}
-
-/**
- * i2c_ackrcv - see if ack following write is true
- * @dd: the infinipath device
- */
-static int i2c_ackrcv(struct ipath_devdata *dd)
-{
-	u8 ack_received;
-
-	/* AT ENTRY SCL = LOW */
-	/* change direction, ignore data */
-	ack_received = sda_in(dd, 1);
-	scl_out(dd, i2c_line_high);
-	ack_received = sda_in(dd, 1) == 0;
-	scl_out(dd, i2c_line_low);
-	return ack_received;
-}
-
-/**
- * rd_byte - read a byte, leaving ACK, STOP, etc up to caller
- * @dd: the infinipath device
- *
- * Returns byte shifted out of device
- */
-static int rd_byte(struct ipath_devdata *dd)
-{
-	int bit_cntr, data;
-
-	data = 0;
-
-	for (bit_cntr = 7; bit_cntr >= 0; --bit_cntr) {
-		data <<= 1;
-		scl_out(dd, i2c_line_high);
-		data |= sda_in(dd, 0);
-		scl_out(dd, i2c_line_low);
-	}
-	return data;
-}
-
-/**
- * wr_byte - write a byte, one bit at a time
- * @dd: the infinipath device
- * @data: the byte to write
- *
- * Returns 0 if we got the following ack, otherwise 1
- */
-static int wr_byte(struct ipath_devdata *dd, u8 data)
-{
-	int bit_cntr;
-	u8 bit;
-
-	for (bit_cntr = 7; bit_cntr >= 0; bit_cntr--) {
-		bit = (data >> bit_cntr) & 1;
-		sda_out(dd, bit);
-		scl_out(dd, i2c_line_high);
-		scl_out(dd, i2c_line_low);
-	}
-	return (!i2c_ackrcv(dd)) ? 1 : 0;
-}
-
-static void send_ack(struct ipath_devdata *dd)
-{
-	sda_out(dd, i2c_line_low);
-	scl_out(dd, i2c_line_high);
-	scl_out(dd, i2c_line_low);
-	sda_out(dd, i2c_line_high);
-}
-
-/**
- * i2c_startcmd - transmit the start condition, followed by address/cmd
- * @dd: the infinipath device
- * @offset_dir: direction byte
- *
- *      (both clock/data high, clock high, data low while clock is high)
- */
-static int i2c_startcmd(struct ipath_devdata *dd, u8 offset_dir)
-{
-	int res;
-
-	/* issue start sequence */
-	sda_out(dd, i2c_line_high);
-	scl_out(dd, i2c_line_high);
-	sda_out(dd, i2c_line_low);
-	scl_out(dd, i2c_line_low);
-
-	/* issue length and direction byte */
-	res = wr_byte(dd, offset_dir);
-
-	if (res)
-		ipath_cdbg(VERBOSE, "No ack to complete start\n");
-
-	return res;
-}
-
-/**
- * stop_cmd - transmit the stop condition
- * @dd: the infinipath device
- *
- * (both clock/data low, clock high, data high while clock is high)
- */
-static void stop_cmd(struct ipath_devdata *dd)
-{
-	scl_out(dd, i2c_line_low);
-	sda_out(dd, i2c_line_low);
-	scl_out(dd, i2c_line_high);
-	sda_out(dd, i2c_line_high);
-	udelay(2);
-}
-
-/**
- * eeprom_reset - reset I2C communication
- * @dd: the infinipath device
- */
-
-static int eeprom_reset(struct ipath_devdata *dd)
-{
-	int clock_cycles_left = 9;
-	u64 *gpioval = &dd->ipath_gpio_out;
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&dd->ipath_gpio_lock, flags);
-	/* Make sure shadows are consistent */
-	dd->ipath_extctrl = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extctrl);
-	*gpioval = ipath_read_kreg64(dd, dd->ipath_kregs->kr_gpio_out);
-	spin_unlock_irqrestore(&dd->ipath_gpio_lock, flags);
-
-	ipath_cdbg(VERBOSE, "Resetting i2c eeprom; initial gpioout reg "
-		   "is %llx\n", (unsigned long long) *gpioval);
-
-	/*
-	 * This is to get the i2c into a known state, by first going low,
-	 * then tristate sda (and then tristate scl as first thing
-	 * in loop)
-	 */
-	scl_out(dd, i2c_line_low);
-	sda_out(dd, i2c_line_high);
-
-	/* Clock up to 9 cycles looking for SDA hi, then issue START and STOP */
-	while (clock_cycles_left--) {
-		scl_out(dd, i2c_line_high);
-
-		/* SDA seen high, issue START by dropping it while SCL high */
-		if (sda_in(dd, 0)) {
-			sda_out(dd, i2c_line_low);
-			scl_out(dd, i2c_line_low);
-			/* ATMEL spec says must be followed by STOP. */
-			scl_out(dd, i2c_line_high);
-			sda_out(dd, i2c_line_high);
-			ret = 0;
-			goto bail;
-		}
-
-		scl_out(dd, i2c_line_low);
-	}
-
-	ret = 1;
-
-bail:
-	return ret;
-}
-
-/*
- * Probe for I2C device at specified address. Returns 0 for "success"
- * to match rest of this file.
- * Leave bus in "reasonable" state for further commands.
- */
-static int i2c_probe(struct ipath_devdata *dd, int devaddr)
-{
-	int ret = 0;
-
-	ret = eeprom_reset(dd);
-	if (ret) {
-		ipath_dev_err(dd, "Failed reset probing device 0x%02X\n",
-			      devaddr);
-		return ret;
-	}
-	/*
-	 * Reset no longer leaves bus in start condition, so normal
-	 * i2c_startcmd() will do.
-	 */
-	ret = i2c_startcmd(dd, devaddr | READ_CMD);
-	if (ret)
-		ipath_cdbg(VERBOSE, "Failed startcmd for device 0x%02X\n",
-			   devaddr);
-	else {
-		/*
-		 * Device did respond. Complete a single-byte read, because some
-		 * devices apparently cannot handle STOP immediately after they
-		 * ACK the start-cmd.
-		 */
-		int data;
-		data = rd_byte(dd);
-		stop_cmd(dd);
-		ipath_cdbg(VERBOSE, "Response from device 0x%02X\n", devaddr);
-	}
-	return ret;
-}
-
-/*
- * Returns the "i2c type". This is a pointer to a struct that describes
- * the I2C chain on this board. To minimize impact on struct ipath_devdata,
- * the (small integer) index into the table is actually memoized, rather
- * then the pointer.
- * Memoization is because the type is determined on the first call per chip.
- * An alternative would be to move type determination to early
- * init code.
- */
-static struct i2c_chain_desc *ipath_i2c_type(struct ipath_devdata *dd)
-{
-	int idx;
-
-	/* Get memoized index, from previous successful probes */
-	idx = dd->ipath_i2c_chain_type - 1;
-	if (idx >= 0 && idx < (ARRAY_SIZE(i2c_chains) - 1))
-		goto done;
-
-	idx = 0;
-	while (i2c_chains[idx].probe_dev != IPATH_NO_DEV) {
-		/* if probe succeeds, this is type */
-		if (!i2c_probe(dd, i2c_chains[idx].probe_dev))
-			break;
-		++idx;
-	}
-
-	/*
-	 * Old EEPROM (first entry) may require a reset after probe,
-	 * rather than being able to "start" after "stop"
-	 */
-	if (idx == 0)
-		eeprom_reset(dd);
-
-	if (i2c_chains[idx].probe_dev == IPATH_NO_DEV)
-		idx = -1;
-	else
-		dd->ipath_i2c_chain_type = idx + 1;
-done:
-	return (idx >= 0) ? i2c_chains + idx : NULL;
-}
-
-static int ipath_eeprom_internal_read(struct ipath_devdata *dd,
-					u8 eeprom_offset, void *buffer, int len)
-{
-	int ret;
-	struct i2c_chain_desc *icd;
-	u8 *bp = buffer;
-
-	ret = 1;
-	icd = ipath_i2c_type(dd);
-	if (!icd)
-		goto bail;
-
-	if (icd->eeprom_dev == IPATH_NO_DEV) {
-		/* legacy not-really-I2C */
-		ipath_cdbg(VERBOSE, "Start command only address\n");
-		eeprom_offset = (eeprom_offset << 1) | READ_CMD;
-		ret = i2c_startcmd(dd, eeprom_offset);
-	} else {
-		/* Actual I2C */
-		ipath_cdbg(VERBOSE, "Start command uses devaddr\n");
-		if (i2c_startcmd(dd, icd->eeprom_dev | WRITE_CMD)) {
-			ipath_dbg("Failed EEPROM startcmd\n");
-			stop_cmd(dd);
-			ret = 1;
-			goto bail;
-		}
-		ret = wr_byte(dd, eeprom_offset);
-		stop_cmd(dd);
-		if (ret) {
-			ipath_dev_err(dd, "Failed to write EEPROM address\n");
-			ret = 1;
-			goto bail;
-		}
-		ret = i2c_startcmd(dd, icd->eeprom_dev | READ_CMD);
-	}
-	if (ret) {
-		ipath_dbg("Failed startcmd for dev %02X\n", icd->eeprom_dev);
-		stop_cmd(dd);
-		ret = 1;
-		goto bail;
-	}
-
-	/*
-	 * eeprom keeps clocking data out as long as we ack, automatically
-	 * incrementing the address.
-	 */
-	while (len-- > 0) {
-		/* get and store data */
-		*bp++ = rd_byte(dd);
-		/* send ack if not the last byte */
-		if (len)
-			send_ack(dd);
-	}
-
-	stop_cmd(dd);
-
-	ret = 0;
-
-bail:
-	return ret;
-}
-
-static int ipath_eeprom_internal_write(struct ipath_devdata *dd, u8 eeprom_offset,
-				       const void *buffer, int len)
-{
-	int sub_len;
-	const u8 *bp = buffer;
-	int max_wait_time, i;
-	int ret;
-	struct i2c_chain_desc *icd;
-
-	ret = 1;
-	icd = ipath_i2c_type(dd);
-	if (!icd)
-		goto bail;
-
-	while (len > 0) {
-		if (icd->eeprom_dev == IPATH_NO_DEV) {
-			if (i2c_startcmd(dd,
-					 (eeprom_offset << 1) | WRITE_CMD)) {
-				ipath_dbg("Failed to start cmd offset %u\n",
-					eeprom_offset);
-				goto failed_write;
-			}
-		} else {
-			/* Real I2C */
-			if (i2c_startcmd(dd, icd->eeprom_dev | WRITE_CMD)) {
-				ipath_dbg("Failed EEPROM startcmd\n");
-				goto failed_write;
-			}
-			ret = wr_byte(dd, eeprom_offset);
-			if (ret) {
-				ipath_dev_err(dd, "Failed to write EEPROM "
-					      "address\n");
-				goto failed_write;
-			}
-		}
-
-		sub_len = min(len, 4);
-		eeprom_offset += sub_len;
-		len -= sub_len;
-
-		for (i = 0; i < sub_len; i++) {
-			if (wr_byte(dd, *bp++)) {
-				ipath_dbg("no ack after byte %u/%u (%u "
-					  "total remain)\n", i, sub_len,
-					  len + sub_len - i);
-				goto failed_write;
-			}
-		}
-
-		stop_cmd(dd);
-
-		/*
-		 * wait for write complete by waiting for a successful
-		 * read (the chip replies with a zero after the write
-		 * cmd completes, and before it writes to the eeprom.
-		 * The startcmd for the read will fail the ack until
-		 * the writes have completed.   We do this inline to avoid
-		 * the debug prints that are in the real read routine
-		 * if the startcmd fails.
-		 * We also use the proper device address, so it doesn't matter
-		 * whether we have real eeprom_dev. legacy likes any address.
-		 */
-		max_wait_time = 100;
-		while (i2c_startcmd(dd, icd->eeprom_dev | READ_CMD)) {
-			stop_cmd(dd);
-			if (!--max_wait_time) {
-				ipath_dbg("Did not get successful read to "
-					  "complete write\n");
-				goto failed_write;
-			}
-		}
-		/* now read (and ignore) the resulting byte */
-		rd_byte(dd);
-		stop_cmd(dd);
-	}
-
-	ret = 0;
-	goto bail;
-
-failed_write:
-	stop_cmd(dd);
-	ret = 1;
-
-bail:
-	return ret;
-}
-
-/**
- * ipath_eeprom_read - receives bytes from the eeprom via I2C
- * @dd: the infinipath device
- * @eeprom_offset: address to read from
- * @buffer: where to store result
- * @len: number of bytes to receive
- */
-int ipath_eeprom_read(struct ipath_devdata *dd, u8 eeprom_offset,
-			void *buff, int len)
-{
-	int ret;
-
-	ret = mutex_lock_interruptible(&dd->ipath_eep_lock);
-	if (!ret) {
-		ret = ipath_eeprom_internal_read(dd, eeprom_offset, buff, len);
-		mutex_unlock(&dd->ipath_eep_lock);
-	}
-
-	return ret;
-}
-
-/**
- * ipath_eeprom_write - writes data to the eeprom via I2C
- * @dd: the infinipath device
- * @eeprom_offset: where to place data
- * @buffer: data to write
- * @len: number of bytes to write
- */
-int ipath_eeprom_write(struct ipath_devdata *dd, u8 eeprom_offset,
-			const void *buff, int len)
-{
-	int ret;
-
-	ret = mutex_lock_interruptible(&dd->ipath_eep_lock);
-	if (!ret) {
-		ret = ipath_eeprom_internal_write(dd, eeprom_offset, buff, len);
-		mutex_unlock(&dd->ipath_eep_lock);
-	}
-
-	return ret;
-}
-
-static u8 flash_csum(struct ipath_flash *ifp, int adjust)
-{
-	u8 *ip = (u8 *) ifp;
-	u8 csum = 0, len;
-
-	/*
-	 * Limit length checksummed to max length of actual data.
-	 * Checksum of erased eeprom will still be bad, but we avoid
-	 * reading past the end of the buffer we were passed.
-	 */
-	len = ifp->if_length;
-	if (len > sizeof(struct ipath_flash))
-		len = sizeof(struct ipath_flash);
-	while (len--)
-		csum += *ip++;
-	csum -= ifp->if_csum;
-	csum = ~csum;
-	if (adjust)
-		ifp->if_csum = csum;
-
-	return csum;
-}
-
-/**
- * ipath_get_guid - get the GUID from the i2c device
- * @dd: the infinipath device
- *
- * We have the capability to use the ipath_nguid field, and get
- * the guid from the first chip's flash, to use for all of them.
- */
-void ipath_get_eeprom_info(struct ipath_devdata *dd)
-{
-	void *buf;
-	struct ipath_flash *ifp;
-	__be64 guid;
-	int len, eep_stat;
-	u8 csum, *bguid;
-	int t = dd->ipath_unit;
-	struct ipath_devdata *dd0 = ipath_lookup(0);
-
-	if (t && dd0->ipath_nguid > 1 && t <= dd0->ipath_nguid) {
-		u8 oguid;
-		dd->ipath_guid = dd0->ipath_guid;
-		bguid = (u8 *) & dd->ipath_guid;
-
-		oguid = bguid[7];
-		bguid[7] += t;
-		if (oguid > bguid[7]) {
-			if (bguid[6] == 0xff) {
-				if (bguid[5] == 0xff) {
-					ipath_dev_err(
-						dd,
-						"Can't set %s GUID from "
-						"base, wraps to OUI!\n",
-						ipath_get_unit_name(t));
-					dd->ipath_guid = 0;
-					goto bail;
-				}
-				bguid[5]++;
-			}
-			bguid[6]++;
-		}
-		dd->ipath_nguid = 1;
-
-		ipath_dbg("nguid %u, so adding %u to device 0 guid, "
-			  "for %llx\n",
-			  dd0->ipath_nguid, t,
-			  (unsigned long long) be64_to_cpu(dd->ipath_guid));
-		goto bail;
-	}
-
-	/*
-	 * read full flash, not just currently used part, since it may have
-	 * been written with a newer definition
-	 * */
-	len = sizeof(struct ipath_flash);
-	buf = vmalloc(len);
-	if (!buf) {
-		ipath_dev_err(dd, "Couldn't allocate memory to read %u "
-			      "bytes from eeprom for GUID\n", len);
-		goto bail;
-	}
-
-	mutex_lock(&dd->ipath_eep_lock);
-	eep_stat = ipath_eeprom_internal_read(dd, 0, buf, len);
-	mutex_unlock(&dd->ipath_eep_lock);
-
-	if (eep_stat) {
-		ipath_dev_err(dd, "Failed reading GUID from eeprom\n");
-		goto done;
-	}
-	ifp = (struct ipath_flash *)buf;
-
-	csum = flash_csum(ifp, 0);
-	if (csum != ifp->if_csum) {
-		dev_info(&dd->pcidev->dev, "Bad I2C flash checksum: "
-			 "0x%x, not 0x%x\n", csum, ifp->if_csum);
-		goto done;
-	}
-	if (*(__be64 *) ifp->if_guid == cpu_to_be64(0) ||
-	    *(__be64 *) ifp->if_guid == ~cpu_to_be64(0)) {
-		ipath_dev_err(dd, "Invalid GUID %llx from flash; "
-			      "ignoring\n",
-			      *(unsigned long long *) ifp->if_guid);
-		/* don't allow GUID if all 0 or all 1's */
-		goto done;
-	}
-
-	/* complain, but allow it */
-	if (*(u64 *) ifp->if_guid == 0x100007511000000ULL)
-		dev_info(&dd->pcidev->dev, "Warning, GUID %llx is "
-			 "default, probably not correct!\n",
-			 *(unsigned long long *) ifp->if_guid);
-
-	bguid = ifp->if_guid;
-	if (!bguid[0] && !bguid[1] && !bguid[2]) {
-		/* original incorrect GUID format in flash; fix in
-		 * core copy, by shifting up 2 octets; don't need to
-		 * change top octet, since both it and shifted are
-		 * 0.. */
-		bguid[1] = bguid[3];
-		bguid[2] = bguid[4];
-		bguid[3] = bguid[4] = 0;
-		guid = *(__be64 *) ifp->if_guid;
-		ipath_cdbg(VERBOSE, "Old GUID format in flash, top 3 zero, "
-			   "shifting 2 octets\n");
-	} else
-		guid = *(__be64 *) ifp->if_guid;
-	dd->ipath_guid = guid;
-	dd->ipath_nguid = ifp->if_numguid;
-	/*
-	 * Things are slightly complicated by the desire to transparently
-	 * support both the Pathscale 10-digit serial number and the QLogic
-	 * 13-character version.
-	 */
-	if ((ifp->if_fversion > 1) && ifp->if_sprefix[0]
-		&& ((u8 *)ifp->if_sprefix)[0] != 0xFF) {
-		/* This board has a Serial-prefix, which is stored
-		 * elsewhere for backward-compatibility.
-		 */
-		char *snp = dd->ipath_serial;
-		memcpy(snp, ifp->if_sprefix, sizeof ifp->if_sprefix);
-		snp[sizeof ifp->if_sprefix] = '\0';
-		len = strlen(snp);
-		snp += len;
-		len = (sizeof dd->ipath_serial) - len;
-		if (len > sizeof ifp->if_serial) {
-			len = sizeof ifp->if_serial;
-		}
-		memcpy(snp, ifp->if_serial, len);
-	} else
-		memcpy(dd->ipath_serial, ifp->if_serial,
-		       sizeof ifp->if_serial);
-	if (!strstr(ifp->if_comment, "Tested successfully"))
-		ipath_dev_err(dd, "Board SN %s did not pass functional "
-			"test: %s\n", dd->ipath_serial,
-			ifp->if_comment);
-
-	ipath_cdbg(VERBOSE, "Initted GUID to %llx from eeprom\n",
-		   (unsigned long long) be64_to_cpu(dd->ipath_guid));
-
-	memcpy(&dd->ipath_eep_st_errs, &ifp->if_errcntp, IPATH_EEP_LOG_CNT);
-	/*
-	 * Power-on (actually "active") hours are kept as little-endian value
-	 * in EEPROM, but as seconds in a (possibly as small as 24-bit)
-	 * atomic_t while running.
-	 */
-	atomic_set(&dd->ipath_active_time, 0);
-	dd->ipath_eep_hrs = ifp->if_powerhour[0] | (ifp->if_powerhour[1] << 8);
-
-done:
-	vfree(buf);
-
-bail:;
-}
-
-/**
- * ipath_update_eeprom_log - copy active-time and error counters to eeprom
- * @dd: the infinipath device
- *
- * Although the time is kept as seconds in the ipath_devdata struct, it is
- * rounded to hours for re-write, as we have only 16 bits in EEPROM.
- * First-cut code reads whole (expected) struct ipath_flash, modifies,
- * re-writes. Future direction: read/write only what we need, assuming
- * that the EEPROM had to have been "good enough" for driver init, and
- * if not, we aren't making it worse.
- *
- */
-
-int ipath_update_eeprom_log(struct ipath_devdata *dd)
-{
-	void *buf;
-	struct ipath_flash *ifp;
-	int len, hi_water;
-	uint32_t new_time, new_hrs;
-	u8 csum;
-	int ret, idx;
-	unsigned long flags;
-
-	/* first, check if we actually need to do anything. */
-	ret = 0;
-	for (idx = 0; idx < IPATH_EEP_LOG_CNT; ++idx) {
-		if (dd->ipath_eep_st_new_errs[idx]) {
-			ret = 1;
-			break;
-		}
-	}
-	new_time = atomic_read(&dd->ipath_active_time);
-
-	if (ret == 0 && new_time < 3600)
-		return 0;
-
-	/*
-	 * The quick-check above determined that there is something worthy
-	 * of logging, so get current contents and do a more detailed idea.
-	 * read full flash, not just currently used part, since it may have
-	 * been written with a newer definition
-	 */
-	len = sizeof(struct ipath_flash);
-	buf = vmalloc(len);
-	ret = 1;
-	if (!buf) {
-		ipath_dev_err(dd, "Couldn't allocate memory to read %u "
-				"bytes from eeprom for logging\n", len);
-		goto bail;
-	}
-
-	/* Grab semaphore and read current EEPROM. If we get an
-	 * error, let go, but if not, keep it until we finish write.
-	 */
-	ret = mutex_lock_interruptible(&dd->ipath_eep_lock);
-	if (ret) {
-		ipath_dev_err(dd, "Unable to acquire EEPROM for logging\n");
-		goto free_bail;
-	}
-	ret = ipath_eeprom_internal_read(dd, 0, buf, len);
-	if (ret) {
-		mutex_unlock(&dd->ipath_eep_lock);
-		ipath_dev_err(dd, "Unable read EEPROM for logging\n");
-		goto free_bail;
-	}
-	ifp = (struct ipath_flash *)buf;
-
-	csum = flash_csum(ifp, 0);
-	if (csum != ifp->if_csum) {
-		mutex_unlock(&dd->ipath_eep_lock);
-		ipath_dev_err(dd, "EEPROM cks err (0x%02X, S/B 0x%02X)\n",
-				csum, ifp->if_csum);
-		ret = 1;
-		goto free_bail;
-	}
-	hi_water = 0;
-	spin_lock_irqsave(&dd->ipath_eep_st_lock, flags);
-	for (idx = 0; idx < IPATH_EEP_LOG_CNT; ++idx) {
-		int new_val = dd->ipath_eep_st_new_errs[idx];
-		if (new_val) {
-			/*
-			 * If we have seen any errors, add to EEPROM values
-			 * We need to saturate at 0xFF (255) and we also
-			 * would need to adjust the checksum if we were
-			 * trying to minimize EEPROM traffic
-			 * Note that we add to actual current count in EEPROM,
-			 * in case it was altered while we were running.
-			 */
-			new_val += ifp->if_errcntp[idx];
-			if (new_val > 0xFF)
-				new_val = 0xFF;
-			if (ifp->if_errcntp[idx] != new_val) {
-				ifp->if_errcntp[idx] = new_val;
-				hi_water = offsetof(struct ipath_flash,
-						if_errcntp) + idx;
-			}
-			/*
-			 * update our shadow (used to minimize EEPROM
-			 * traffic), to match what we are about to write.
-			 */
-			dd->ipath_eep_st_errs[idx] = new_val;
-			dd->ipath_eep_st_new_errs[idx] = 0;
-		}
-	}
-	/*
-	 * now update active-time. We would like to round to the nearest hour
-	 * but unless atomic_t are sure to be proper signed ints we cannot,
-	 * because we need to account for what we "transfer" to EEPROM and
-	 * if we log an hour at 31 minutes, then we would need to set
-	 * active_time to -29 to accurately count the _next_ hour.
-	 */
-	if (new_time >= 3600) {
-		new_hrs = new_time / 3600;
-		atomic_sub((new_hrs * 3600), &dd->ipath_active_time);
-		new_hrs += dd->ipath_eep_hrs;
-		if (new_hrs > 0xFFFF)
-			new_hrs = 0xFFFF;
-		dd->ipath_eep_hrs = new_hrs;
-		if ((new_hrs & 0xFF) != ifp->if_powerhour[0]) {
-			ifp->if_powerhour[0] = new_hrs & 0xFF;
-			hi_water = offsetof(struct ipath_flash, if_powerhour);
-		}
-		if ((new_hrs >> 8) != ifp->if_powerhour[1]) {
-			ifp->if_powerhour[1] = new_hrs >> 8;
-			hi_water = offsetof(struct ipath_flash, if_powerhour)
-					+ 1;
-		}
-	}
-	/*
-	 * There is a tiny possibility that we could somehow fail to write
-	 * the EEPROM after updating our shadows, but problems from holding
-	 * the spinlock too long are a much bigger issue.
-	 */
-	spin_unlock_irqrestore(&dd->ipath_eep_st_lock, flags);
-	if (hi_water) {
-		/* we made some change to the data, uopdate cksum and write */
-		csum = flash_csum(ifp, 1);
-		ret = ipath_eeprom_internal_write(dd, 0, buf, hi_water + 1);
-	}
-	mutex_unlock(&dd->ipath_eep_lock);
-	if (ret)
-		ipath_dev_err(dd, "Failed updating EEPROM\n");
-
-free_bail:
-	vfree(buf);
-bail:
-	return ret;
-
-}
-
-/**
- * ipath_inc_eeprom_err - increment one of the four error counters
- * that are logged to EEPROM.
- * @dd: the infinipath device
- * @eidx: 0..3, the counter to increment
- * @incr: how much to add
- *
- * Each counter is 8-bits, and saturates at 255 (0xFF). They
- * are copied to the EEPROM (aka flash) whenever ipath_update_eeprom_log()
- * is called, but it can only be called in a context that allows sleep.
- * This function can be called even at interrupt level.
- */
-
-void ipath_inc_eeprom_err(struct ipath_devdata *dd, u32 eidx, u32 incr)
-{
-	uint new_val;
-	unsigned long flags;
-
-	spin_lock_irqsave(&dd->ipath_eep_st_lock, flags);
-	new_val = dd->ipath_eep_st_new_errs[eidx] + incr;
-	if (new_val > 255)
-		new_val = 255;
-	dd->ipath_eep_st_new_errs[eidx] = new_val;
-	spin_unlock_irqrestore(&dd->ipath_eep_st_lock, flags);
-	return;
-}
-
-static int ipath_tempsense_internal_read(struct ipath_devdata *dd, u8 regnum)
-{
-	int ret;
-	struct i2c_chain_desc *icd;
-
-	ret = -ENOENT;
-
-	icd = ipath_i2c_type(dd);
-	if (!icd)
-		goto bail;
-
-	if (icd->temp_dev == IPATH_NO_DEV) {
-		/* tempsense only exists on new, real-I2C boards */
-		ret = -ENXIO;
-		goto bail;
-	}
-
-	if (i2c_startcmd(dd, icd->temp_dev | WRITE_CMD)) {
-		ipath_dbg("Failed tempsense startcmd\n");
-		stop_cmd(dd);
-		ret = -ENXIO;
-		goto bail;
-	}
-	ret = wr_byte(dd, regnum);
-	stop_cmd(dd);
-	if (ret) {
-		ipath_dev_err(dd, "Failed tempsense WR command %02X\n",
-			      regnum);
-		ret = -ENXIO;
-		goto bail;
-	}
-	if (i2c_startcmd(dd, icd->temp_dev | READ_CMD)) {
-		ipath_dbg("Failed tempsense RD startcmd\n");
-		stop_cmd(dd);
-		ret = -ENXIO;
-		goto bail;
-	}
-	/*
-	 * We can only clock out one byte per command, sensibly
-	 */
-	ret = rd_byte(dd);
-	stop_cmd(dd);
-
-bail:
-	return ret;
-}
-
-#define VALID_TS_RD_REG_MASK 0xBF
-
-/**
- * ipath_tempsense_read - read register of temp sensor via I2C
- * @dd: the infinipath device
- * @regnum: register to read from
- *
- * returns reg contents (0..255) or < 0 for error
- */
-int ipath_tempsense_read(struct ipath_devdata *dd, u8 regnum)
-{
-	int ret;
-
-	if (regnum > 7)
-		return -EINVAL;
-
-	/* return a bogus value for (the one) register we do not have */
-	if (!((1 << regnum) & VALID_TS_RD_REG_MASK))
-		return 0;
-
-	ret = mutex_lock_interruptible(&dd->ipath_eep_lock);
-	if (!ret) {
-		ret = ipath_tempsense_internal_read(dd, regnum);
-		mutex_unlock(&dd->ipath_eep_lock);
-	}
-
-	/*
-	 * There are three possibilities here:
-	 * ret is actual value (0..255)
-	 * ret is -ENXIO or -EINVAL from code in this file
-	 * ret is -EINTR from mutex_lock_interruptible.
-	 */
-	return ret;
-}
-
-static int ipath_tempsense_internal_write(struct ipath_devdata *dd,
-					  u8 regnum, u8 data)
-{
-	int ret = -ENOENT;
-	struct i2c_chain_desc *icd;
-
-	icd = ipath_i2c_type(dd);
-	if (!icd)
-		goto bail;
-
-	if (icd->temp_dev == IPATH_NO_DEV) {
-		/* tempsense only exists on new, real-I2C boards */
-		ret = -ENXIO;
-		goto bail;
-	}
-	if (i2c_startcmd(dd, icd->temp_dev | WRITE_CMD)) {
-		ipath_dbg("Failed tempsense startcmd\n");
-		stop_cmd(dd);
-		ret = -ENXIO;
-		goto bail;
-	}
-	ret = wr_byte(dd, regnum);
-	if (ret) {
-		stop_cmd(dd);
-		ipath_dev_err(dd, "Failed to write tempsense command %02X\n",
-			      regnum);
-		ret = -ENXIO;
-		goto bail;
-	}
-	ret = wr_byte(dd, data);
-	stop_cmd(dd);
-	ret = i2c_startcmd(dd, icd->temp_dev | READ_CMD);
-	if (ret) {
-		ipath_dev_err(dd, "Failed tempsense data wrt to %02X\n",
-			      regnum);
-		ret = -ENXIO;
-	}
-
-bail:
-	return ret;
-}
-
-#define VALID_TS_WR_REG_MASK ((1 << 9) | (1 << 0xB) | (1 << 0xD))
-
-/**
- * ipath_tempsense_write - write register of temp sensor via I2C
- * @dd: the infinipath device
- * @regnum: register to write
- * @data: data to write
- *
- * returns 0 for success or < 0 for error
- */
-int ipath_tempsense_write(struct ipath_devdata *dd, u8 regnum, u8 data)
-{
-	int ret;
-
-	if (regnum > 15 || !((1 << regnum) & VALID_TS_WR_REG_MASK))
-		return -EINVAL;
-
-	ret = mutex_lock_interruptible(&dd->ipath_eep_lock);
-	if (!ret) {
-		ret = ipath_tempsense_internal_write(dd, regnum, data);
-		mutex_unlock(&dd->ipath_eep_lock);
-	}
-
-	/*
-	 * There are three possibilities here:
-	 * ret is 0 for success
-	 * ret is -ENXIO or -EINVAL from code in this file
-	 * ret is -EINTR from mutex_lock_interruptible.
-	 */
-	return ret;
-}