diff options
| author | Alan Nisota <alannisota@gmail.com> | 2007-08-18 20:52:35 (GMT) |
|---|---|---|
| committer | Mauro Carvalho Chehab <mchehab@infradead.org> | 2007-10-10 01:05:22 (GMT) |
| commit | 458b634cd86968032171a4d6db5c89a772ff0348 (patch) | |
| tree | 420b1a0933457e5910f2bcee542cc77e4aef5ee3 /drivers/media/dvb/dvb-usb/gp8psk.h | |
| parent | fa40b2237ab6ed239967f76432438080232b88fe (diff) | |
| download | linux-458b634cd86968032171a4d6db5c89a772ff0348.tar.xz | |
V4L/DVB (6037): Updated GenPix USB driver
There are now 4 different versions of the GENPIX USB adapter. The
newest 'Skywalker' models are fully self-contained, and need no
additional hardware to be used. A very reliable DVB-S card even without
using any of the alternate modulatations (which this kernel module does
not currently support)
The following patch adds support for all 4 versions of the genpix
adapter (www.genpix-electronics.com).
Signed-off-by: Alan Nisota alannisota@gmail.com
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Diffstat (limited to 'drivers/media/dvb/dvb-usb/gp8psk.h')
| -rw-r--r-- | drivers/media/dvb/dvb-usb/gp8psk.h | 32 |
1 files changed, 25 insertions, 7 deletions
diff --git a/drivers/media/dvb/dvb-usb/gp8psk.h b/drivers/media/dvb/dvb-usb/gp8psk.h index 3eba706..e83a575 100644 --- a/drivers/media/dvb/dvb-usb/gp8psk.h +++ b/drivers/media/dvb/dvb-usb/gp8psk.h @@ -1,7 +1,8 @@ /* DVB USB compliant Linux driver for the - * - GENPIX 8pks/qpsk USB2.0 DVB-S module + * - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module * * Copyright (C) 2006 Alan Nisota (alannisota@gmail.com) + * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com) * * Thanks to GENPIX for the sample code used to implement this module. * @@ -30,21 +31,37 @@ extern int dvb_usb_gp8psk_debug; #define TH_COMMAND_IN 0xC0 #define TH_COMMAND_OUT 0xC1 -/* command bytes */ -#define GET_8PSK_CONFIG 0x80 +/* gp8psk commands */ + +#define GET_8PSK_CONFIG 0x80 /* in */ #define SET_8PSK_CONFIG 0x81 +#define I2C_WRITE 0x83 +#define I2C_READ 0x84 #define ARM_TRANSFER 0x85 #define TUNE_8PSK 0x86 -#define GET_SIGNAL_STRENGTH 0x87 +#define GET_SIGNAL_STRENGTH 0x87 /* in */ #define LOAD_BCM4500 0x88 -#define BOOT_8PSK 0x89 -#define START_INTERSIL 0x8A +#define BOOT_8PSK 0x89 /* in */ +#define START_INTERSIL 0x8A /* in */ #define SET_LNB_VOLTAGE 0x8B #define SET_22KHZ_TONE 0x8C #define SEND_DISEQC_COMMAND 0x8D #define SET_DVB_MODE 0x8E #define SET_DN_SWITCH 0x8F -#define GET_SIGNAL_LOCK 0x90 +#define GET_SIGNAL_LOCK 0x90 /* in */ +#define GET_SERIAL_NUMBER 0x93 /* in */ +#define USE_EXTRA_VOLT 0x94 +#define CW3K_INIT 0x9d + +/* PSK_configuration bits */ +#define bm8pskStarted 0x01 +#define bm8pskFW_Loaded 0x02 +#define bmIntersilOn 0x04 +#define bmDVBmode 0x08 +#define bm22kHz 0x10 +#define bmSEL18V 0x20 +#define bmDCtuned 0x40 +#define bmArmed 0x80 /* Satellite modulation modes */ #define ADV_MOD_DVB_QPSK 0 /* DVB-S QPSK */ @@ -75,5 +92,6 @@ extern struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d); extern int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen); extern int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen); +extern int gp8psk_bcm4500_reload(struct dvb_usb_device *d); #endif |