Merge tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Bit a bit -fixes pull request in the merge window than usual dua to two
feauture-y things:
- Display CRCs are now enabled on all platforms, including the odd DP case
  on gm45/vlv. Since this is a testing-only feature it should ever hurt,
  but I figured it'll help with regression-testing -fixes. So I left it
  in and didn't postpone it to 3.14.
- Display power well refactoring from Imre. Would have caused major pain
  conflict with the bdw stage 1 patches if I'd postpone this to -next.
  It's only an relatively small interface rework, so shouldn't cause pain.
  It's also been in my tree since almost 3 weeks already.

That accounts for about two thirds of the pull, otherwise just bugfixes:
- vlv backlight fix from Jesse/Jani
- vlv vblank timestamp fix from Jesse
- improved edp detection through vbt from Ville (fixes a vlv issue)
- eDP vdd fix from Paulo
- fixes for dvo lvds on i830M
- a few smaller things all over

Note: This contains a backmerge of v3.12. Since the -internal branch
always applied on top of -nightly I need that unified base to merge bdw
patches. So you'll get a conflict with radeon connector props when pulling
this (and nouveau/master will also conflict a bit when Ben doesn't
rebase). The backmerge itself only had conflicts in drm/i915.

There's also a tiny conflict between Jani's backlight fix and your sysfs
lifetime fix in drm-next.

* tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel: (940 commits)
  drm/i915/vlv: use per-pipe backlight controls v2
  drm/i915: make backlight functions take a connector
  drm/i915: move opregion asle request handling to a work queue
  drm/i915/vlv: use PIPE_START_VBLANK interrupts on VLV
  drm/i915: Make intel_dp_is_edp() less specific
  drm/i915: Give names to the VBT child device type bits
  drm/i915/vlv: enable HDA display audio for Valleyview2
  drm/i915/dvo: call ->mode_set callback only when the port is running
  drm/i915: avoid unclaimed registers when capturing the error state
  drm/i915: Enable DP port CRC for the "auto" source on g4x/vlv
  drm/i915: scramble reset support for DP port CRC on vlv
  drm/i915: scramble reset support for DP port CRC on g4x
  drm/i916: add "auto" pipe CRC source
  ...

Conflicts:
	MAINTAINERS
	drivers/gpu/drm/i915/intel_panel.c
	drivers/gpu/drm/nouveau/core/subdev/mc/base.c
	drivers/gpu/drm/radeon/atombios_encoders.c
	drivers/gpu/drm/radeon/radeon_connectors.c

1 files changed, 9 insertions, 9 deletions

diff --git a/drivers/media/i2c/adv7511.c b/drivers/media/i2c/adv7511.c
index 7a576097..7c8d971 100644
--- a/drivers/media/i2c/adv7511.c
+++ b/drivers/media/i2c/adv7511.c
@@ -119,16 +119,14 @@ static int adv7511_s_clock_freq(struct v4l2_subdev *sd, u32 freq);
 
 static const struct v4l2_dv_timings_cap adv7511_timings_cap = {
 	.type = V4L2_DV_BT_656_1120,
-	.bt = {
-		.max_width = ADV7511_MAX_WIDTH,
-		.max_height = ADV7511_MAX_HEIGHT,
-		.min_pixelclock = ADV7511_MIN_PIXELCLOCK,
-		.max_pixelclock = ADV7511_MAX_PIXELCLOCK,
-		.standards = V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
+	/* keep this initialization for compatibility with GCC < 4.4.6 */
+	.reserved = { 0 },
+	V4L2_INIT_BT_TIMINGS(0, ADV7511_MAX_WIDTH, 0, ADV7511_MAX_HEIGHT,
+		ADV7511_MIN_PIXELCLOCK, ADV7511_MAX_PIXELCLOCK,
+		V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
 			V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT,
-		.capabilities = V4L2_DV_BT_CAP_PROGRESSIVE |
-			V4L2_DV_BT_CAP_REDUCED_BLANKING | V4L2_DV_BT_CAP_CUSTOM,
-	},
+		V4L2_DV_BT_CAP_PROGRESSIVE | V4L2_DV_BT_CAP_REDUCED_BLANKING |
+			V4L2_DV_BT_CAP_CUSTOM)
 };
 
 static inline struct adv7511_state *get_adv7511_state(struct v4l2_subdev *sd)
@@ -1126,6 +1124,7 @@ static int adv7511_probe(struct i2c_client *client, const struct i2c_device_id *
 	state->i2c_edid = i2c_new_dummy(client->adapter, state->i2c_edid_addr >> 1);
 	if (state->i2c_edid == NULL) {
 		v4l2_err(sd, "failed to register edid i2c client\n");
+		err = -ENOMEM;
 		goto err_entity;
 	}
 
@@ -1133,6 +1132,7 @@ static int adv7511_probe(struct i2c_client *client, const struct i2c_device_id *
 	state->work_queue = create_singlethread_workqueue(sd->name);
 	if (state->work_queue == NULL) {
 		v4l2_err(sd, "could not create workqueue\n");
+		err = -ENOMEM;
 		goto err_unreg_cec;
 	}