diff options
author | Hans Verkuil <hans.verkuil@cisco.com> | 2013-03-10 12:59:37 (GMT) |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2013-03-24 15:05:48 (GMT) |
commit | c875dee536ee2a95a353f5ef991717383baf8d60 (patch) | |
tree | 19c149f2876046f2ccb875fe2340d3f91bedf53e /drivers/media/i2c/saa7115.c | |
parent | a0fc58868bbf34d0935947cdf1bc8c0ea32c68c4 (diff) | |
download | linux-c875dee536ee2a95a353f5ef991717383baf8d60.tar.xz |
[media] saa7115: improve querystd handling for the saa7115
The saa7115 has better PAL/NTSC detection, so it can detect PAL even
though the chip is currently set up for NTSC.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media/i2c/saa7115.c')
-rw-r--r-- | drivers/media/i2c/saa7115.c | 56 |
1 files changed, 28 insertions, 28 deletions
diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c index c3e7e12..cdff1f6 100644 --- a/drivers/media/i2c/saa7115.c +++ b/drivers/media/i2c/saa7115.c @@ -1360,6 +1360,34 @@ static int saa711x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) */ reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); + + if (state->ident == V4L2_IDENT_SAA7115) { + reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC); + + v4l2_dbg(1, debug, sd, "Status byte 1 (0x1e)=0x%02x\n", reg1e); + + switch (reg1e & 0x03) { + case 1: + *std &= V4L2_STD_NTSC; + break; + case 2: + /* + * V4L2_STD_PAL just cover the european PAL standards. + * This is wrong, as the device could also be using an + * other PAL standard. + */ + *std &= V4L2_STD_PAL | V4L2_STD_PAL_N | V4L2_STD_PAL_Nc | + V4L2_STD_PAL_M | V4L2_STD_PAL_60; + break; + case 3: + *std &= V4L2_STD_SECAM; + break; + default: + /* Can't detect anything */ + break; + } + } + v4l2_dbg(1, debug, sd, "Status byte 2 (0x1f)=0x%02x\n", reg1f); /* horizontal/vertical not locked */ @@ -1371,34 +1399,6 @@ static int saa711x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) else *std &= V4L2_STD_625_50; - if (state->ident != V4L2_IDENT_SAA7115) - goto ret; - - reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC); - - switch (reg1e & 0x03) { - case 1: - *std &= V4L2_STD_NTSC; - break; - case 2: - /* - * V4L2_STD_PAL just cover the european PAL standards. - * This is wrong, as the device could also be using an - * other PAL standard. - */ - *std &= V4L2_STD_PAL | V4L2_STD_PAL_N | V4L2_STD_PAL_Nc | - V4L2_STD_PAL_M | V4L2_STD_PAL_60; - break; - case 3: - *std &= V4L2_STD_SECAM; - break; - default: - /* Can't detect anything */ - break; - } - - v4l2_dbg(1, debug, sd, "Status byte 1 (0x1e)=0x%02x\n", reg1e); - ret: v4l2_dbg(1, debug, sd, "detected std mask = %08Lx\n", *std); |