[media] rc-core: document the protocol type

Right now the protocol information is not preserved, rc-core gets handed a
scancode but has no idea which protocol it corresponds to.

This patch (which required reading through the source/keymap for all drivers,
not fun) makes the protocol information explicit which is important
documentation and makes it easier to e.g. support multiple protocols with one
decoder (think rc5 and rc-streamzap). The information isn't used yet so there
should be no functional changes.

[m.chehab@samsung.com: rebased, added cxusb and removed bad whitespacing]
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

1 files changed, 18 insertions, 12 deletions

diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index 970b93d..9abcf77 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -623,6 +623,7 @@ EXPORT_SYMBOL_GPL(rc_repeat);
 /**
  * ir_do_keydown() - internal function to process a keypress
  * @dev:	the struct rc_dev descriptor of the device
+ * @protocol:	the protocol of the keypress
  * @scancode:   the scancode of the keypress
  * @keycode:    the keycode of the keypress
  * @toggle:     the toggle value of the keypress
@@ -630,12 +631,13 @@ EXPORT_SYMBOL_GPL(rc_repeat);
  * This function is used internally to register a keypress, it must be
  * called with keylock held.
  */
-static void ir_do_keydown(struct rc_dev *dev, int scancode,
-			  u32 keycode, u8 toggle)
+static void ir_do_keydown(struct rc_dev *dev, enum rc_type protocol,
+			  u32 scancode, u32 keycode, u8 toggle)
 {
 	bool new_event = (!dev->keypressed		 ||
+			  dev->last_protocol != protocol ||
 			  dev->last_scancode != scancode ||
-			  dev->last_toggle != toggle);
+			  dev->last_toggle   != toggle);
 
 	if (new_event && dev->keypressed)
 		ir_do_keyup(dev, false);
@@ -645,13 +647,14 @@ static void ir_do_keydown(struct rc_dev *dev, int scancode,
 	if (new_event && keycode != KEY_RESERVED) {
 		/* Register a keypress */
 		dev->keypressed = true;
+		dev->last_protocol = protocol;
 		dev->last_scancode = scancode;
 		dev->last_toggle = toggle;
 		dev->last_keycode = keycode;
 
 		IR_dprintk(1, "%s: key down event, "
-			   "key 0x%04x, scancode 0x%04x\n",
-			   dev->input_name, keycode, scancode);
+			   "key 0x%04x, protocol 0x%04x, scancode 0x%08x\n",
+			   dev->input_name, keycode, protocol, scancode);
 		input_report_key(dev->input_dev, keycode, 1);
 
 		led_trigger_event(led_feedback, LED_FULL);
@@ -663,20 +666,21 @@ static void ir_do_keydown(struct rc_dev *dev, int scancode,
 /**
  * rc_keydown() - generates input event for a key press
  * @dev:	the struct rc_dev descriptor of the device
- * @scancode:   the scancode that we're seeking
+ * @protocol:	the protocol for the keypress
+ * @scancode:	the scancode for the keypress
  * @toggle:     the toggle value (protocol dependent, if the protocol doesn't
  *              support toggle values, this should be set to zero)
  *
  * This routine is used to signal that a key has been pressed on the
  * remote control.
  */
-void rc_keydown(struct rc_dev *dev, int scancode, u8 toggle)
+void rc_keydown(struct rc_dev *dev, enum rc_type protocol, u32 scancode, u8 toggle)
 {
 	unsigned long flags;
 	u32 keycode = rc_g_keycode_from_table(dev, scancode);
 
 	spin_lock_irqsave(&dev->keylock, flags);
-	ir_do_keydown(dev, scancode, keycode, toggle);
+	ir_do_keydown(dev, protocol, scancode, keycode, toggle);
 
 	if (dev->keypressed) {
 		dev->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
@@ -690,20 +694,22 @@ EXPORT_SYMBOL_GPL(rc_keydown);
  * rc_keydown_notimeout() - generates input event for a key press without
  *                          an automatic keyup event at a later time
  * @dev:	the struct rc_dev descriptor of the device
- * @scancode:   the scancode that we're seeking
+ * @protocol:	the protocol for the keypress
+ * @scancode:	the scancode for the keypress
  * @toggle:     the toggle value (protocol dependent, if the protocol doesn't
  *              support toggle values, this should be set to zero)
  *
  * This routine is used to signal that a key has been pressed on the
  * remote control. The driver must manually call rc_keyup() at a later stage.
  */
-void rc_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle)
+void rc_keydown_notimeout(struct rc_dev *dev, enum rc_type protocol,
+			  u32 scancode, u8 toggle)
 {
 	unsigned long flags;
 	u32 keycode = rc_g_keycode_from_table(dev, scancode);
 
 	spin_lock_irqsave(&dev->keylock, flags);
-	ir_do_keydown(dev, scancode, keycode, toggle);
+	ir_do_keydown(dev, protocol, scancode, keycode, toggle);
 	spin_unlock_irqrestore(&dev->keylock, flags);
 }
 EXPORT_SYMBOL_GPL(rc_keydown_notimeout);
@@ -1315,7 +1321,7 @@ int rc_register_device(struct rc_dev *dev)
 	dev->dev.groups = dev->sysfs_groups;
 	dev->sysfs_groups[attr++] = &rc_dev_protocol_attr_grp;
 	if (dev->s_filter)
-		dev->sysfs_groups[attr++] = &rc_dev_filter_attr_grp;	
+		dev->sysfs_groups[attr++] = &rc_dev_filter_attr_grp;
 	if (dev->s_wakeup_filter)
 		dev->sysfs_groups[attr++] = &rc_dev_wakeup_filter_attr_grp;
 	if (dev->change_wakeup_protocol)