Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (116 commits)
  V4L/DVB (13698): pms: replace asm/uaccess.h to linux/uaccess.h
  V4L/DVB (13690): radio/si470x: #include <sched.h>
  V4L/DVB (13688): au8522: modify the attributes of local filter coefficients
  V4L/DVB (13687): cx231xx: use NULL when pointer is needed
  V4L/DVB: Davinci VPFE Capture: remove unused #include <linux/version.h>
  V4L/DVB (13685): Correct code taking the size of a pointer
  V4L/DVB (13684): Fix some cut-and-paste noise in dib0090.h
  V4L/DVB (13683): sanio-ms: clean up init, exit and id_table
  V4L/DVB (13682): dib8000: make some constant static
  V4L/DVB: lgs8gxx: Use shifts rather than multiply/divide when possible
  V4L/DVB (13680b): DocBook/media: create links for included sources
  V4L/DVB (13680a): DocBook/media: copy images after building HTML
  V4L/DVB (13678): Add support for yet another DvbWorld, TeVii and Prof USB devices
  V4L/DVB (13676): configurable IRQ mode on NetUP Dual DVB-S2 CI; IRQ from CAM processing (CI interface works faster)
  V4L/DVB (13674): stv090x: Add DiSEqC envelope mode
  V4L/DVB (13673): lnbp21: Implement 22 kHz tone control
  V4L/DVB (13671): sh_mobile_ceu_camera: Remove frame size page alignment
  V4L/DVB (13670): soc-camera: Add mt9t112 camera driver
  V4L/DVB (13669): tw9910: Add sync polarity support
  V4L/DVB (13668): tw9910: remove cropping
  ...

1 files changed, 24 insertions, 21 deletions

diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c
index 88987a5..e6c23d50 100644
--- a/drivers/media/video/et61x251/et61x251_core.c
+++ b/drivers/media/video/et61x251/et61x251_core.c
@@ -587,8 +587,8 @@ static int et61x251_stream_interrupt(struct et61x251_device* cam)
 	else if (cam->stream != STREAM_OFF) {
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "URB timeout reached. The camera is misconfigured. To "
-		       "use it, close and open /dev/video%d again.",
-		    cam->v4ldev->num);
+		       "use it, close and open %s again.",
+		    video_device_node_name(cam->v4ldev));
 		return -EIO;
 	}
 
@@ -1195,7 +1195,8 @@ static void et61x251_release_resources(struct kref *kref)
 
 	cam = container_of(kref, struct et61x251_device, kref);
 
-	DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->num);
+	DBG(2, "V4L2 device %s deregistered",
+	    video_device_node_name(cam->v4ldev));
 	video_set_drvdata(cam->v4ldev, NULL);
 	video_unregister_device(cam->v4ldev);
 	usb_put_dev(cam->usbdev);
@@ -1236,8 +1237,8 @@ static int et61x251_open(struct file *filp)
 	}
 
 	if (cam->users) {
-		DBG(2, "Device /dev/video%d is already in use",
-		       cam->v4ldev->num);
+		DBG(2, "Device %s is already in use",
+		       video_device_node_name(cam->v4ldev));
 		DBG(3, "Simultaneous opens are not supported");
 		if ((filp->f_flags & O_NONBLOCK) ||
 		    (filp->f_flags & O_NDELAY)) {
@@ -1280,7 +1281,8 @@ static int et61x251_open(struct file *filp)
 	cam->frame_count = 0;
 	et61x251_empty_framequeues(cam);
 
-	DBG(3, "Video device /dev/video%d is open", cam->v4ldev->num);
+	DBG(3, "Video device %s is open",
+	    video_device_node_name(cam->v4ldev));
 
 out:
 	mutex_unlock(&cam->open_mutex);
@@ -1304,7 +1306,8 @@ static int et61x251_release(struct file *filp)
 	cam->users--;
 	wake_up_interruptible_nr(&cam->wait_open, 1);
 
-	DBG(3, "Video device /dev/video%d closed", cam->v4ldev->num);
+	DBG(3, "Video device %s closed",
+	    video_device_node_name(cam->v4ldev));
 
 	kref_put(&cam->kref, et61x251_release_resources);
 
@@ -1846,8 +1849,8 @@ et61x251_vidioc_s_crop(struct et61x251_device* cam, void __user * arg)
 	if (err) { /* atomic, no rollback in ioctl() */
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
-		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->num);
+		       "use the camera, close and open %s again.",
+		    video_device_node_name(cam->v4ldev));
 		return -EIO;
 	}
 
@@ -1859,8 +1862,8 @@ et61x251_vidioc_s_crop(struct et61x251_device* cam, void __user * arg)
 	    nbuffers != et61x251_request_buffers(cam, nbuffers, cam->io)) {
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
-		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->num);
+		       "use the camera, close and open %s again.",
+		    video_device_node_name(cam->v4ldev));
 		return -ENOMEM;
 	}
 
@@ -2069,8 +2072,8 @@ et61x251_vidioc_try_s_fmt(struct et61x251_device* cam, unsigned int cmd,
 	if (err) { /* atomic, no rollback in ioctl() */
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
-		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->num);
+		       "use the camera, close and open %s again.",
+		    video_device_node_name(cam->v4ldev));
 		return -EIO;
 	}
 
@@ -2081,8 +2084,8 @@ et61x251_vidioc_try_s_fmt(struct et61x251_device* cam, unsigned int cmd,
 	    nbuffers != et61x251_request_buffers(cam, nbuffers, cam->io)) {
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
-		       "use the camera, close and open /dev/video%d again.",
-		    cam->v4ldev->num);
+		       "use the camera, close and open %s again.",
+		    video_device_node_name(cam->v4ldev));
 		return -ENOMEM;
 	}
 
@@ -2130,7 +2133,7 @@ et61x251_vidioc_s_jpegcomp(struct et61x251_device* cam, void __user * arg)
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
 		       "problems. To use the camera, close and open "
-		       "/dev/video%d again.", cam->v4ldev->num);
+		       "%s again.", video_device_node_name(cam->v4ldev));
 		return -EIO;
 	}
 
@@ -2584,7 +2587,6 @@ et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
 
 	strcpy(cam->v4ldev->name, "ET61X[12]51 PC Camera");
 	cam->v4ldev->fops = &et61x251_fops;
-	cam->v4ldev->minor = video_nr[dev_nr];
 	cam->v4ldev->release = video_device_release;
 	cam->v4ldev->parent = &udev->dev;
 	video_set_drvdata(cam->v4ldev, cam);
@@ -2603,7 +2605,8 @@ et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
 		goto fail;
 	}
 
-	DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->num);
+	DBG(2, "V4L2 device registered as %s",
+	    video_device_node_name(cam->v4ldev));
 
 	cam->module_param.force_munmap = force_munmap[dev_nr];
 	cam->module_param.frame_timeout = frame_timeout[dev_nr];
@@ -2654,9 +2657,9 @@ static void et61x251_usb_disconnect(struct usb_interface* intf)
 	DBG(2, "Disconnecting %s...", cam->v4ldev->name);
 
 	if (cam->users) {
-		DBG(2, "Device /dev/video%d is open! Deregistration and "
-		       "memory deallocation are deferred.",
-		    cam->v4ldev->num);
+		DBG(2, "Device %s is open! Deregistration and memory "
+		       "deallocation are deferred.",
+		    video_device_node_name(cam->v4ldev));
 		cam->state |= DEV_MISCONFIGURED;
 		et61x251_stop_transfer(cam);
 		cam->state |= DEV_DISCONNECTED;