Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 - some V4L2 API updates needed by embedded devices
 - DVB API extensions for ATSC-MH delivery system, used in US for mobile
   TV
 - new tuners for fc0011/0012/0013 and tua9001
 - a new dvb driver for af9033/9035
 - a new ATSC-MH frontend (lg2160)
 - new remote controller keymaps
 - Removal of a few legacy webcam driver that got replaced by gspca on
   several kernel versions ago
 - a new driver for Exynos 4/5 webcams(s5pp fimc-lite)
 - a new webcam sensor driver (smiapp)
 - a new video input driver for embedded (sta2x1xx)
 - several improvements, fixes, cleanups, etc inside the drivers.

Manually fix up conflicts due to err() -> dev_err() conversion in
drivers/staging/media/easycap/easycap_main.c

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (484 commits)
  [media] saa7134-cards: Remove a PCI entry added by mistake
  [media] radio-sf16fmi: add support for SF16-FMD
  [media] rc-loopback: remove duplicate line
  [media] patch for Asus My Cinema PS3-100 (1043:48cd)
  [media] au0828: Move the Kconfig knob under V4L_USB_DRIVERS
  [media] em28xx: simple comment fix
  [media] [resend] radio-sf16fmr2: add PnP support for SF16-FMD2
  [media] smiapp: Use v4l2_ctrl_new_int_menu() instead of v4l2_ctrl_new_custom()
  [media] smiapp: Add support for 8-bit uncompressed formats
  [media] smiapp: Allow generic quirk registers
  [media] smiapp: Use non-binning limits if the binning limit is zero
  [media] smiapp: Initialise rval in smiapp_read_nvm()
  [media] smiapp: Round minimum pre_pll up rather than down in ip_clk_freq check
  [media] smiapp: Use 8-bit reads only before identifying the sensor
  [media] smiapp: Quirk for sensors that only do 8-bit reads
  [media] smiapp: Pass struct sensor to register writing commands instead of i2c_client
  [media] smiapp: Allow using external clock from the clock framework
  [media] zl10353: change .read_snr() to report SNR as a 0.1 dB
  [media] media: add support to gspca/pac7302.c for 093a:2627 (Genius FaceCam 300)
  [media] m88rs2000 - only flip bit 2 on reg 0x70 on 16th try
  ...

1 files changed, 13 insertions, 2 deletions

diff --git a/drivers/media/video/via-camera.c b/drivers/media/video/via-camera.c
index 20f7237..308e150 100644
--- a/drivers/media/video/via-camera.c
+++ b/drivers/media/video/via-camera.c
@@ -18,6 +18,7 @@
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-chip-ident.h>
+#include <media/ov7670.h>
 #include <media/videobuf-dma-sg.h>
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
@@ -1347,11 +1348,21 @@ static __devinit bool viacam_serial_is_enabled(void)
 	return false;
 }
 
+static struct ov7670_config sensor_cfg = {
+	/* The XO-1.5 (only known user) clocks the camera at 90MHz. */
+	.clock_speed = 90,
+};
+
 static __devinit int viacam_probe(struct platform_device *pdev)
 {
 	int ret;
 	struct i2c_adapter *sensor_adapter;
 	struct viafb_dev *viadev = pdev->dev.platform_data;
+	struct i2c_board_info ov7670_info = {
+		.type = "ov7670",
+		.addr = 0x42 >> 1,
+		.platform_data = &sensor_cfg,
+	};
 
 	/*
 	 * Note that there are actually two capture channels on
@@ -1433,8 +1444,8 @@ static __devinit int viacam_probe(struct platform_device *pdev)
 	 * is OLPC-specific.  0x42 assumption is ov7670-specific.
 	 */
 	sensor_adapter = viafb_find_i2c_adapter(VIA_PORT_31);
-	cam->sensor = v4l2_i2c_new_subdev(&cam->v4l2_dev, sensor_adapter,
-			"ov7670", 0x42 >> 1, NULL);
+	cam->sensor = v4l2_i2c_new_subdev_board(&cam->v4l2_dev, sensor_adapter,
+			&ov7670_info, NULL);
 	if (cam->sensor == NULL) {
 		dev_err(&pdev->dev, "Unable to find the sensor!\n");
 		ret = -ENODEV;