[media] usbvideo: deprecate the vicam driver

Move usbvideo to staging and mark it deprecated.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 files changed, 0 insertions, 3597 deletions

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 4b751ef..3655b30 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -915,8 +915,6 @@ source "drivers/media/video/cx231xx/Kconfig"
 
 source "drivers/media/video/usbvision/Kconfig"
 
-source "drivers/media/video/usbvideo/Kconfig"
-
 source "drivers/media/video/et61x251/Kconfig"
 
 config USB_SE401
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index ace7b6e..2f2e3ac 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -133,10 +133,6 @@ obj-$(CONFIG_USB_GSPCA)         += gspca/
 
 obj-$(CONFIG_VIDEO_HDPVR)	+= hdpvr/
 
-obj-$(CONFIG_USB_IBMCAM)        += usbvideo/
-obj-$(CONFIG_USB_KONICAWC)      += usbvideo/
-obj-$(CONFIG_USB_VICAM)         += usbvideo/
-obj-$(CONFIG_USB_QUICKCAM_MESSENGER)	+= usbvideo/
 obj-$(CONFIG_USB_S2255)		+= s2255drv.o
 
 obj-$(CONFIG_VIDEO_IVTV) += ivtv/
diff --git a/drivers/media/video/usbvideo/Kconfig b/drivers/media/video/usbvideo/Kconfig
deleted file mode 100644
index 357860d..0000000
--- a/drivers/media/video/usbvideo/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-config VIDEO_USBVIDEO
-	tristate
-
-config USB_VICAM
-	tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)"
-	depends on VIDEO_V4L1 && EXPERIMENTAL
-	select VIDEO_USBVIDEO
-	---help---
-	  Say Y here if you have 3com homeconnect camera (vicam).
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called vicam.
diff --git a/drivers/media/video/usbvideo/Makefile b/drivers/media/video/usbvideo/Makefile
deleted file mode 100644
index 3c99a9a..0000000
--- a/drivers/media/video/usbvideo/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-obj-$(CONFIG_VIDEO_USBVIDEO)    += usbvideo.o
-obj-$(CONFIG_USB_VICAM)         += vicam.o
diff --git a/drivers/media/video/usbvideo/usbvideo.c b/drivers/media/video/usbvideo/usbvideo.c
deleted file mode 100644
index f1fcf97..0000000
--- a/drivers/media/video/usbvideo/usbvideo.c
+++ /dev/null
@@ -1,2230 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/list.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <asm/io.h>
-
-#include "usbvideo.h"
-
-#if defined(MAP_NR)
-#define	virt_to_page(v)	MAP_NR(v)	/* Kernels 2.2.x */
-#endif
-
-static int video_nr = -1;
-module_param(video_nr, int, 0);
-
-/*
- * Local prototypes.
- */
-static void usbvideo_Disconnect(struct usb_interface *intf);
-static void usbvideo_CameraRelease(struct uvd *uvd);
-
-static long usbvideo_v4l_ioctl(struct file *file,
-			      unsigned int cmd, unsigned long arg);
-static int usbvideo_v4l_mmap(struct file *file, struct vm_area_struct *vma);
-static int usbvideo_v4l_open(struct file *file);
-static ssize_t usbvideo_v4l_read(struct file *file, char __user *buf,
-			     size_t count, loff_t *ppos);
-static int usbvideo_v4l_close(struct file *file);
-
-static int usbvideo_StartDataPump(struct uvd *uvd);
-static void usbvideo_StopDataPump(struct uvd *uvd);
-static int usbvideo_GetFrame(struct uvd *uvd, int frameNum);
-static int usbvideo_NewFrame(struct uvd *uvd, int framenum);
-static void usbvideo_SoftwareContrastAdjustment(struct uvd *uvd,
-						struct usbvideo_frame *frame);
-
-/*******************************/
-/* Memory management functions */
-/*******************************/
-static void *usbvideo_rvmalloc(unsigned long size)
-{
-	void *mem;
-	unsigned long adr;
-
-	size = PAGE_ALIGN(size);
-	mem = vmalloc_32(size);
-	if (!mem)
-		return NULL;
-
-	memset(mem, 0, size); /* Clear the ram out, no junk to the user */
-	adr = (unsigned long) mem;
-	while (size > 0) {
-		SetPageReserved(vmalloc_to_page((void *)adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-
-	return mem;
-}
-
-static void usbvideo_rvfree(void *mem, unsigned long size)
-{
-	unsigned long adr;
-
-	if (!mem)
-		return;
-
-	adr = (unsigned long) mem;
-	while ((long) size > 0) {
-		ClearPageReserved(vmalloc_to_page((void *)adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-	vfree(mem);
-}
-
-static void RingQueue_Initialize(struct RingQueue *rq)
-{
-	assert(rq != NULL);
-	init_waitqueue_head(&rq->wqh);
-}
-
-static void RingQueue_Allocate(struct RingQueue *rq, int rqLen)
-{
-	/* Make sure the requested size is a power of 2 and
-	   round up if necessary. This allows index wrapping
-	   using masks rather than modulo */
-
-	int i = 1;
-	assert(rq != NULL);
-	assert(rqLen > 0);
-
-	while(rqLen >> i)
-		i++;
-	if(rqLen != 1 << (i-1))
-		rqLen = 1 << i;
-
-	rq->length = rqLen;
-	rq->ri = rq->wi = 0;
-	rq->queue = usbvideo_rvmalloc(rq->length);
-	assert(rq->queue != NULL);
-}
-
-static int RingQueue_IsAllocated(const struct RingQueue *rq)
-{
-	if (rq == NULL)
-		return 0;
-	return (rq->queue != NULL) && (rq->length > 0);
-}
-
-static void RingQueue_Free(struct RingQueue *rq)
-{
-	assert(rq != NULL);
-	if (RingQueue_IsAllocated(rq)) {
-		usbvideo_rvfree(rq->queue, rq->length);
-		rq->queue = NULL;
-		rq->length = 0;
-	}
-}
-
-int RingQueue_Dequeue(struct RingQueue *rq, unsigned char *dst, int len)
-{
-	int rql, toread;
-
-	assert(rq != NULL);
-	assert(dst != NULL);
-
-	rql = RingQueue_GetLength(rq);
-	if(!rql)
-		return 0;
-
-	/* Clip requested length to available data */
-	if(len > rql)
-		len = rql;
-
-	toread = len;
-	if(rq->ri > rq->wi) {
-		/* Read data from tail */
-		int read = (toread < (rq->length - rq->ri)) ? toread : rq->length - rq->ri;
-		memcpy(dst, rq->queue + rq->ri, read);
-		toread -= read;
-		dst += read;
-		rq->ri = (rq->ri + read) & (rq->length-1);
-	}
-	if(toread) {
-		/* Read data from head */
-		memcpy(dst, rq->queue + rq->ri, toread);
-		rq->ri = (rq->ri + toread) & (rq->length-1);
-	}
-	return len;
-}
-
-EXPORT_SYMBOL(RingQueue_Dequeue);
-
-int RingQueue_Enqueue(struct RingQueue *rq, const unsigned char *cdata, int n)
-{
-	int enqueued = 0;
-
-	assert(rq != NULL);
-	assert(cdata != NULL);
-	assert(rq->length > 0);
-	while (n > 0) {
-		int m, q_avail;
-
-		/* Calculate the largest chunk that fits the tail of the ring */
-		q_avail = rq->length - rq->wi;
-		if (q_avail <= 0) {
-			rq->wi = 0;
-			q_avail = rq->length;
-		}
-		m = n;
-		assert(q_avail > 0);
-		if (m > q_avail)
-			m = q_avail;
-
-		memcpy(rq->queue + rq->wi, cdata, m);
-		RING_QUEUE_ADVANCE_INDEX(rq, wi, m);
-		cdata += m;
-		enqueued += m;
-		n -= m;
-	}
-	return enqueued;
-}
-
-EXPORT_SYMBOL(RingQueue_Enqueue);
-
-static void RingQueue_InterruptibleSleepOn(struct RingQueue *rq)
-{
-	assert(rq != NULL);
-	interruptible_sleep_on(&rq->wqh);
-}
-
-void RingQueue_WakeUpInterruptible(struct RingQueue *rq)
-{
-	assert(rq != NULL);
-	if (waitqueue_active(&rq->wqh))
-		wake_up_interruptible(&rq->wqh);
-}
-
-EXPORT_SYMBOL(RingQueue_WakeUpInterruptible);
-
-void RingQueue_Flush(struct RingQueue *rq)
-{
-	assert(rq != NULL);
-	rq->ri = 0;
-	rq->wi = 0;
-}
-
-EXPORT_SYMBOL(RingQueue_Flush);
-
-
-/*
- * usbvideo_VideosizeToString()
- *
- * This procedure converts given videosize value to readable string.
- *
- * History:
- * 07-Aug-2000 Created.
- * 19-Oct-2000 Reworked for usbvideo module.
- */
-static void usbvideo_VideosizeToString(char *buf, int bufLen, videosize_t vs)
-{
-	char tmp[40];
-	int n;
-
-	n = 1 + sprintf(tmp, "%ldx%ld", VIDEOSIZE_X(vs), VIDEOSIZE_Y(vs));
-	assert(n < sizeof(tmp));
-	if ((buf == NULL) || (bufLen < n))
-		err("usbvideo_VideosizeToString: buffer is too small.");
-	else
-		memmove(buf, tmp, n);
-}
-
-/*
- * usbvideo_OverlayChar()
- *
- * History:
- * 01-Feb-2000 Created.
- */
-static void usbvideo_OverlayChar(struct uvd *uvd, struct usbvideo_frame *frame,
-				 int x, int y, int ch)
-{
-	static const unsigned short digits[16] = {
-		0xF6DE, /* 0 */
-		0x2492, /* 1 */
-		0xE7CE, /* 2 */
-		0xE79E, /* 3 */
-		0xB792, /* 4 */
-		0xF39E, /* 5 */
-		0xF3DE, /* 6 */
-		0xF492, /* 7 */
-		0xF7DE, /* 8 */
-		0xF79E, /* 9 */
-		0x77DA, /* a */
-		0xD75C, /* b */
-		0xF24E, /* c */
-		0xD6DC, /* d */
-		0xF34E, /* e */
-		0xF348  /* f */
-	};
-	unsigned short digit;
-	int ix, iy;
-	int value;
-
-	if ((uvd == NULL) || (frame == NULL))
-		return;
-
-	value = hex_to_bin(ch);
-	if (value < 0)
-		return;
-	digit = digits[value];
-
-	for (iy=0; iy < 5; iy++) {
-		for (ix=0; ix < 3; ix++) {
-			if (digit & 0x8000) {
-				if (uvd->paletteBits & (1L << VIDEO_PALETTE_RGB24)) {
-/* TODO */				RGB24_PUTPIXEL(frame, x+ix, y+iy, 0xFF, 0xFF, 0xFF);
-				}
-			}
-			digit = digit << 1;
-		}
-	}
-}
-
-/*
- * usbvideo_OverlayString()
- *
- * History:
- * 01-Feb-2000 Created.
- */
-static void usbvideo_OverlayString(struct uvd *uvd, struct usbvideo_frame *frame,
-				   int x, int y, const char *str)
-{
-	while (*str) {
-		usbvideo_OverlayChar(uvd, frame, x, y, *str);
-		str++;
-		x += 4; /* 3 pixels character + 1 space */
-	}
-}
-
-/*
- * usbvideo_OverlayStats()
- *
- * Overlays important debugging information.
- *
- * History:
- * 01-Feb-2000 Created.
- */
-static void usbvideo_OverlayStats(struct uvd *uvd, struct usbvideo_frame *frame)
-{
-	const int y_diff = 8;
-	char tmp[16];
-	int x = 10, y=10;
-	long i, j, barLength;
-	const int qi_x1 = 60, qi_y1 = 10;
-	const int qi_x2 = VIDEOSIZE_X(frame->request) - 10, qi_h = 10;
-
-	/* Call the user callback, see if we may proceed after that */
-	if (VALID_CALLBACK(uvd, overlayHook)) {
-		if (GET_CALLBACK(uvd, overlayHook)(uvd, frame) < 0)
-			return;
-	}
-
-	/*
-	 * We draw a (mostly) hollow rectangle with qi_xxx coordinates.
-	 * Left edge symbolizes the queue index 0; right edge symbolizes
-	 * the full capacity of the queue.
-	 */
-	barLength = qi_x2 - qi_x1 - 2;
-	if ((barLength > 10) && (uvd->paletteBits & (1L << VIDEO_PALETTE_RGB24))) {
-/* TODO */	long u_lo, u_hi, q_used;
-		long m_ri, m_wi, m_lo, m_hi;
-
-		/*
-		 * Determine fill zones (used areas of the queue):
-		 * 0 xxxxxxx u_lo ...... uvd->dp.ri xxxxxxxx u_hi ..... uvd->dp.length
-		 *
-		 * if u_lo < 0 then there is no first filler.
-		 */
-
-		q_used = RingQueue_GetLength(&uvd->dp);
-		if ((uvd->dp.ri + q_used) >= uvd->dp.length) {
-			u_hi = uvd->dp.length;
-			u_lo = (q_used + uvd->dp.ri) & (uvd->dp.length-1);
-		} else {
-			u_hi = (q_used + uvd->dp.ri);
-			u_lo = -1;
-		}
-
-		/* Convert byte indices into screen units */
-		m_ri = qi_x1 + ((barLength * uvd->dp.ri) / uvd->dp.length);
-		m_wi = qi_x1 + ((barLength * uvd->dp.wi) / uvd->dp.length);
-		m_lo = (u_lo > 0) ? (qi_x1 + ((barLength * u_lo) / uvd->dp.length)) : -1;
-		m_hi = qi_x1 + ((barLength * u_hi) / uvd->dp.length);
-
-		for (j=qi_y1; j < (qi_y1 + qi_h); j++) {
-			for (i=qi_x1; i < qi_x2; i++) {
-				/* Draw border lines */
-				if ((j == qi_y1) || (j == (qi_y1 + qi_h - 1)) ||
-				    (i == qi_x1) || (i == (qi_x2 - 1))) {
-					RGB24_PUTPIXEL(frame, i, j, 0xFF, 0xFF, 0xFF);
-					continue;
-				}
-				/* For all other points the Y coordinate does not matter */
-				if ((i >= m_ri) && (i <= (m_ri + 3))) {
-					RGB24_PUTPIXEL(frame, i, j, 0x00, 0xFF, 0x00);
-				} else if ((i >= m_wi) && (i <= (m_wi + 3))) {
-					RGB24_PUTPIXEL(frame, i, j, 0xFF, 0x00, 0x00);
-				} else if ((i < m_lo) || ((i > m_ri) && (i < m_hi)))
-					RGB24_PUTPIXEL(frame, i, j, 0x00, 0x00, 0xFF);
-			}
-		}
-	}
-
-	sprintf(tmp, "%8lx", uvd->stats.frame_num);
-	usbvideo_OverlayString(uvd, frame, x, y, tmp);
-	y += y_diff;
-
-	sprintf(tmp, "%8lx", uvd->stats.urb_count);
-	usbvideo_OverlayString(uvd, frame, x, y, tmp);
-	y += y_diff;
-
-	sprintf(tmp, "%8lx", uvd->stats.urb_length);
-	usbvideo_OverlayString(uvd, frame, x, y, tmp);
-	y += y_diff;
-
-	sprintf(tmp, "%8lx", uvd->stats.data_count);
-	usbvideo_OverlayString(uvd, frame, x, y, tmp);
-	y += y_diff;
-
-	sprintf(tmp, "%8lx", uvd->stats.header_count);
-	usbvideo_OverlayString(uvd, frame, x, y, tmp);
-	y += y_diff;
-
-	sprintf(tmp, "%8lx", uvd->stats.iso_skip_count);
-	usbvideo_OverlayString(uvd, frame, x, y, tmp);
-	y += y_diff;
-
-	sprintf(tmp, "%8lx", uvd->stats.iso_err_count);
-	usbvideo_OverlayString(uvd, frame, x, y, tmp);
-	y += y_diff;
-
-	sprintf(tmp, "%8x", uvd->vpic.colour);
-	usbvideo_OverlayString(uvd, frame, x, y, tmp);
-	y += y_diff;
-
-	sprintf(tmp, "%8x", uvd->vpic.hue);
-	usbvideo_OverlayString(uvd, frame, x, y, tmp);
-	y += y_diff;
-
-	sprintf(tmp, "%8x", uvd->vpic.brightness >> 8);
-	usbvideo_OverlayString(uvd, frame, x, y, tmp);
-	y += y_diff;
-
-	sprintf(tmp, "%8x", uvd->vpic.contrast >> 12);
-	usbvideo_OverlayString(uvd, frame, x, y, tmp);
-	y += y_diff;
-
-	sprintf(tmp, "%8d", uvd->vpic.whiteness >> 8);
-	usbvideo_OverlayString(uvd, frame, x, y, tmp);
-	y += y_diff;
-}
-
-/*
- * usbvideo_ReportStatistics()
- *
- * This procedure prints packet and transfer statistics.
- *
- * History:
- * 14-Jan-2000 Corrected default multiplier.
- */
-static void usbvideo_ReportStatistics(const struct uvd *uvd)
-{
-	if ((uvd != NULL) && (uvd->stats.urb_count > 0)) {
-		unsigned long allPackets, badPackets, goodPackets, percent;
-		allPackets = uvd->stats.urb_count * CAMERA_URB_FRAMES;
-		badPackets = uvd->stats.iso_skip_count + uvd->stats.iso_err_count;
-		goodPackets = allPackets - badPackets;
-		/* Calculate percentage wisely, remember integer limits */
-		assert(allPackets != 0);
-		if (goodPackets < (((unsigned long)-1)/100))
-			percent = (100 * goodPackets) / allPackets;
-		else
-			percent = goodPackets / (allPackets / 100);
-		dev_info(&uvd->dev->dev,
-			 "Packet Statistics: Total=%lu. Empty=%lu. Usage=%lu%%\n",
-			 allPackets, badPackets, percent);
-		if (uvd->iso_packet_len > 0) {
-			unsigned long allBytes, xferBytes;
-			char multiplier = ' ';
-			allBytes = allPackets * uvd->iso_packet_len;
-			xferBytes = uvd->stats.data_count;
-			assert(allBytes != 0);
-			if (xferBytes < (((unsigned long)-1)/100))
-				percent = (100 * xferBytes) / allBytes;
-			else
-				percent = xferBytes / (allBytes / 100);
-			/* Scale xferBytes for easy reading */
-			if (xferBytes > 10*1024) {
-				xferBytes /= 1024;
-				multiplier = 'K';
-				if (xferBytes > 10*1024) {
-					xferBytes /= 1024;
-					multiplier = 'M';
-					if (xferBytes > 10*1024) {
-						xferBytes /= 1024;
-						multiplier = 'G';
-						if (xferBytes > 10*1024) {
-							xferBytes /= 1024;
-							multiplier = 'T';
-						}
-					}
-				}
-			}
-			dev_info(&uvd->dev->dev,
-				 "Transfer Statistics: Transferred=%lu%cB Usage=%lu%%\n",
-				 xferBytes, multiplier, percent);
-		}
-	}
-}
-
-/*
- * usbvideo_TestPattern()
- *
- * Procedure forms a test pattern (yellow grid on blue background).
- *
- * Parameters:
- * fullframe: if TRUE then entire frame is filled, otherwise the procedure
- *	      continues from the current scanline.
- * pmode      0: fill the frame with solid blue color (like on VCR or TV)
- *	      1: Draw a colored grid
- *
- * History:
- * 01-Feb-2000 Created.
- */
-void usbvideo_TestPattern(struct uvd *uvd, int fullframe, int pmode)
-{
-	struct usbvideo_frame *frame;
-	int num_cell = 0;
-	int scan_length = 0;
-	static int num_pass;
-
-	if (uvd == NULL) {
-		err("%s: uvd == NULL", __func__);
-		return;
-	}
-	if ((uvd->curframe < 0) || (uvd->curframe >= USBVIDEO_NUMFRAMES)) {
-		err("%s: uvd->curframe=%d.", __func__, uvd->curframe);
-		return;
-	}
-
-	/* Grab the current frame */
-	frame = &uvd->frame[uvd->curframe];
-
-	/* Optionally start at the beginning */
-	if (fullframe) {
-		frame->curline = 0;
-		frame->seqRead_Length = 0;
-	}
-#if 0
-	{	/* For debugging purposes only */
-		char tmp[20];
-		usbvideo_VideosizeToString(tmp, sizeof(tmp), frame->request);
-		dev_info(&uvd->dev->dev, "testpattern: frame=%s\n", tmp);
-	}
-#endif
-	/* Form every scan line */
-	for (; frame->curline < VIDEOSIZE_Y(frame->request); frame->curline++) {
-		int i;
-		unsigned char *f = frame->data +
-			(VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL * frame->curline);
-		for (i=0; i < VIDEOSIZE_X(frame->request); i++) {
-			unsigned char cb=0x80;
-			unsigned char cg = 0;
-			unsigned char cr = 0;
-
-			if (pmode == 1) {
-				if (frame->curline % 32 == 0)
-					cb = 0, cg = cr = 0xFF;
-				else if (i % 32 == 0) {
-					if (frame->curline % 32 == 1)
-						num_cell++;
-					cb = 0, cg = cr = 0xFF;
-				} else {
-					cb = ((num_cell*7) + num_pass) & 0xFF;
-					cg = ((num_cell*5) + num_pass*2) & 0xFF;
-					cr = ((num_cell*3) + num_pass*3) & 0xFF;
-				}
-			} else {
-				/* Just the blue screen */
-			}
-
-			*f++ = cb;
-			*f++ = cg;
-			*f++ = cr;
-			scan_length += 3;
-		}
-	}
-
-	frame->frameState = FrameState_Done;
-	frame->seqRead_Length += scan_length;
-	++num_pass;
-
-	/* We do this unconditionally, regardless of FLAGS_OVERLAY_STATS */
-	usbvideo_OverlayStats(uvd, frame);
-}
-
-EXPORT_SYMBOL(usbvideo_TestPattern);
-
-
-#ifdef DEBUG
-/*
- * usbvideo_HexDump()
- *
- * A debugging tool. Prints hex dumps.
- *
- * History:
- * 29-Jul-2000 Added printing of offsets.
- */
-void usbvideo_HexDump(const unsigned char *data, int len)
-{
-	const int bytes_per_line = 32;
-	char tmp[128]; /* 32*3 + 5 */
-	int i, k;
-
-	for (i=k=0; len > 0; i++, len--) {
-		if (i > 0 && ((i % bytes_per_line) == 0)) {
-			printk("%s\n", tmp);
-			k=0;
-		}
-		if ((i % bytes_per_line) == 0)
-			k += sprintf(&tmp[k], "%04x: ", i);
-		k += sprintf(&tmp[k], "%02x ", data[i]);
-	}
-	if (k > 0)
-		printk("%s\n", tmp);
-}
-
-EXPORT_SYMBOL(usbvideo_HexDump);
-
-#endif
-
-/* ******************************************************************** */
-
-/* XXX: this piece of crap really wants some error handling.. */
-static int usbvideo_ClientIncModCount(struct uvd *uvd)
-{
-	if (uvd == NULL) {
-		err("%s: uvd == NULL", __func__);
-		return -EINVAL;
-	}
-	if (uvd->handle == NULL) {
-		err("%s: uvd->handle == NULL", __func__);
-		return -EINVAL;
-	}
-	if (!try_module_get(uvd->handle->md_module)) {
-		err("%s: try_module_get() == 0", __func__);
-		return -ENODEV;
-	}
-	return 0;
-}
-
-static void usbvideo_ClientDecModCount(struct uvd *uvd)
-{
-	if (uvd == NULL) {
-		err("%s: uvd == NULL", __func__);
-		return;
-	}
-	if (uvd->handle == NULL) {
-		err("%s: uvd->handle == NULL", __func__);
-		return;
-	}
-	if (uvd->handle->md_module == NULL) {
-		err("%s: uvd->handle->md_module == NULL", __func__);
-		return;
-	}
-	module_put(uvd->handle->md_module);
-}
-
-int usbvideo_register(
-	struct usbvideo **pCams,
-	const int num_cams,
-	const int num_extra,
-	const char *driverName,
-	const struct usbvideo_cb *cbTbl,
-	struct module *md,
-	const struct usb_device_id *id_table)
-{
-	struct usbvideo *cams;
-	int i, base_size, result;
-
-	/* Check parameters for sanity */
-	if ((num_cams <= 0) || (pCams == NULL) || (cbTbl == NULL)) {
-		err("%s: Illegal call", __func__);
-		return -EINVAL;
-	}
-
-	/* Check registration callback - must be set! */
-	if (cbTbl->probe == NULL) {
-		err("%s: probe() is required!", __func__);
-		return -EINVAL;
-	}
-
-	base_size = num_cams * sizeof(struct uvd) + sizeof(struct usbvideo);
-	cams = kzalloc(base_size, GFP_KERNEL);
-	if (cams == NULL) {
-		err("Failed to allocate %d. bytes for usbvideo struct", base_size);
-		return -ENOMEM;
-	}
-	dbg("%s: Allocated $%p (%d. bytes) for %d. cameras",
-	    __func__, cams, base_size, num_cams);
-
-	/* Copy callbacks, apply defaults for those that are not set */
-	memmove(&cams->cb, cbTbl, sizeof(cams->cb));
-	if (cams->cb.getFrame == NULL)
-		cams->cb.getFrame = usbvideo_GetFrame;
-	if (cams->cb.disconnect == NULL)
-		cams->cb.disconnect = usbvideo_Disconnect;
-	if (cams->cb.startDataPump == NULL)
-		cams->cb.startDataPump = usbvideo_StartDataPump;
-	if (cams->cb.stopDataPump == NULL)
-		cams->cb.stopDataPump = usbvideo_StopDataPump;
-
-	cams->num_cameras = num_cams;
-	cams->cam = (struct uvd *) &cams[1];
-	cams->md_module = md;
-	mutex_init(&cams->lock);	/* to 1 == available */
-
-	for (i = 0; i < num_cams; i++) {
-		struct uvd *up = &cams->cam[i];
-
-		up->handle = cams;
-
-		/* Allocate user_data separately because of kmalloc's limits */
-		if (num_extra > 0) {
-			up->user_size = num_cams * num_extra;
-			up->user_data = kmalloc(up->user_size, GFP_KERNEL);
-			if (up->user_data == NULL) {
-				err("%s: Failed to allocate user_data (%d. bytes)",
-				    __func__, up->user_size);
-				while (i) {
-					up = &cams->cam[--i];
-					kfree(up->user_data);
-				}
-				kfree(cams);
-				return -ENOMEM;
-			}
-			dbg("%s: Allocated cams[%d].user_data=$%p (%d. bytes)",
-			     __func__, i, up->user_data, up->user_size);
-		}
-	}
-
-	/*
-	 * Register ourselves with USB stack.
-	 */
-	strcpy(cams->drvName, (driverName != NULL) ? driverName : "Unknown");
-	cams->usbdrv.name = cams->drvName;
-	cams->usbdrv.probe = cams->cb.probe;
-	cams->usbdrv.disconnect = cams->cb.disconnect;
-	cams->usbdrv.id_table = id_table;
-
-	/*
-	 * Update global handle to usbvideo. This is very important
-	 * because probe() can be called before usb_register() returns.
-	 * If the handle is not yet updated then the probe() will fail.
-	 */
-	*pCams = cams;
-	result = usb_register(&cams->usbdrv);
-	if (result) {
-		for (i = 0; i < num_cams; i++) {
-			struct uvd *up = &cams->cam[i];
-			kfree(up->user_data);
-		}
-		kfree(cams);
-	}
-
-	return result;
-}
-
-EXPORT_SYMBOL(usbvideo_register);
-
-/*
- * usbvideo_Deregister()
- *
- * Procedure frees all usbvideo and user data structures. Be warned that
- * if you had some dynamically allocated components in ->user field then
- * you should free them before calling here.
- */
-void usbvideo_Deregister(struct usbvideo **pCams)
-{
-	struct usbvideo *cams;
-	int i;
-
-	if (pCams == NULL) {
-		err("%s: pCams == NULL", __func__);
-		return;
-	}
-	cams = *pCams;
-	if (cams == NULL) {
-		err("%s: cams == NULL", __func__);
-		return;
-	}
-
-	dbg("%s: Deregistering %s driver.", __func__, cams->drvName);
-	usb_deregister(&cams->usbdrv);
-
-	dbg("%s: Deallocating cams=$%p (%d. cameras)", __func__, cams, cams->num_cameras);
-	for (i=0; i < cams->num_cameras; i++) {
-		struct uvd *up = &cams->cam[i];
-		int warning = 0;
-
-		if (up->user_data != NULL) {
-			if (up->user_size <= 0)
-				++warning;
-		} else {
-			if (up->user_size > 0)
-				++warning;
-		}
-		if (warning) {
-			err("%s: Warning: user_data=$%p user_size=%d.",
-			    __func__, up->user_data, up->user_size);
-		} else {
-			dbg("%s: Freeing %d. $%p->user_data=$%p",
-			    __func__, i, up, up->user_data);
-			kfree(up->user_data);
-		}
-	}
-	/* Whole array was allocated in one chunk */
-	dbg("%s: Freed %d uvd structures",
-	    __func__, cams->num_cameras);
-	kfree(cams);
-	*pCams = NULL;
-}
-
-EXPORT_SYMBOL(usbvideo_Deregister);
-
-/*
- * usbvideo_Disconnect()
- *
- * This procedure stops all driver activity. Deallocation of
- * the interface-private structure (pointed by 'ptr') is done now
- * (if we don't have any open files) or later, when those files
- * are closed. After that driver should be removable.
- *
- * This code handles surprise removal. The uvd->user is a counter which
- * increments on open() and decrements on close(). If we see here that
- * this counter is not 0 then we have a client who still has us opened.
- * We set uvd->remove_pending flag as early as possible, and after that
- * all access to the camera will gracefully fail. These failures should
- * prompt client to (eventually) close the video device, and then - in
- * usbvideo_v4l_close() - we decrement uvd->uvd_used and usage counter.
- *
- * History:
- * 22-Jan-2000 Added polling of MOD_IN_USE to delay removal until all users gone.
- * 27-Jan-2000 Reworked to allow pending disconnects; see xxx_close()
- * 24-May-2000 Corrected to prevent race condition (MOD_xxx_USE_COUNT).
- * 19-Oct-2000 Moved to usbvideo module.
- */
-static void usbvideo_Disconnect(struct usb_interface *intf)
-{
-	struct uvd *uvd = usb_get_intfdata (intf);
-	int i;
-
-	if (uvd == NULL) {
-		err("%s($%p): Illegal call.", __func__, intf);
-		return;
-	}
-
-	usb_set_intfdata (intf, NULL);
-
-	usbvideo_ClientIncModCount(uvd);
-	if (uvd->debug > 0)
-		dev_info(&intf->dev, "%s(%p.)\n", __func__, intf);
-
-	mutex_lock(&uvd->lock);
-	uvd->remove_pending = 1; /* Now all ISO data will be ignored */
-
-	/* At this time we ask to cancel outstanding URBs */
-	GET_CALLBACK(uvd, stopDataPump)(uvd);
-
-	for (i=0; i < USBVIDEO_NUMSBUF; i++)
-		usb_free_urb(uvd->sbuf[i].urb);
-
-	usb_put_dev(uvd->dev);
-	uvd->dev = NULL;    	    /* USB device is no more */
-
-	video_unregister_device(&uvd->vdev);
-	if (uvd->debug > 0)
-		dev_info(&intf->dev, "%s: Video unregistered.\n", __func__);
-
-	if (uvd->user)
-		dev_info(&intf->dev, "%s: In use, disconnect pending.\n",
-			 __func__);
-	else
-		usbvideo_CameraRelease(uvd);
-	mutex_unlock(&uvd->lock);
-	dev_info(&intf->dev, "USB camera disconnected.\n");
-
-	usbvideo_ClientDecModCount(uvd);
-}
-
-/*
- * usbvideo_CameraRelease()
- *
- * This code does final release of uvd. This happens
- * after the device is disconnected -and- all clients
- * closed their files.
- *
- * History:
- * 27-Jan-2000 Created.
- */
-static void usbvideo_CameraRelease(struct uvd *uvd)
-{
-	if (uvd == NULL) {
-		err("%s: Illegal call", __func__);
-		return;
-	}
-
-	RingQueue_Free(&uvd->dp);
-	if (VALID_CALLBACK(uvd, userFree))
-		GET_CALLBACK(uvd, userFree)(uvd);
-	uvd->uvd_used = 0;	/* This is atomic, no need to take mutex */
-}
-
-/*
- * usbvideo_find_struct()
- *
- * This code searches the array of preallocated (static) structures
- * and returns index of the first one that isn't in use. Returns -1
- * if there are no free structures.
- *
- * History:
- * 27-Jan-2000 Created.
- */
-static int usbvideo_find_struct(struct usbvideo *cams)
-{
-	int u, rv = -1;
-
-	if (cams == NULL) {
-		err("No usbvideo handle?");
-		return -1;
-	}
-	mutex_lock(&cams->lock);
-	for (u = 0; u < cams->num_cameras; u++) {
-		struct uvd *uvd = &cams->cam[u];
-		if (!uvd->uvd_used) /* This one is free */
-		{
-			uvd->uvd_used = 1;	/* In use now */
-			mutex_init(&uvd->lock);	/* to 1 == available */
-			uvd->dev = NULL;
-			rv = u;
-			break;
-		}
-	}
-	mutex_unlock(&cams->lock);
-	return rv;
-}
-
-static const struct v4l2_file_operations usbvideo_fops = {
-	.owner =  THIS_MODULE,
-	.open =   usbvideo_v4l_open,
-	.release =usbvideo_v4l_close,
-	.read =   usbvideo_v4l_read,
-	.mmap =   usbvideo_v4l_mmap,
-	.ioctl =  usbvideo_v4l_ioctl,
-};
-static const struct video_device usbvideo_template = {
-	.fops =       &usbvideo_fops,
-};
-
-struct uvd *usbvideo_AllocateDevice(struct usbvideo *cams)
-{
-	int i, devnum;
-	struct uvd *uvd = NULL;
-
-	if (cams == NULL) {
-		err("No usbvideo handle?");
-		return NULL;
-	}
-
-	devnum = usbvideo_find_struct(cams);
-	if (devnum == -1) {
-		err("IBM USB camera driver: Too many devices!");
-		return NULL;
-	}
-	uvd = &cams->cam[devnum];
-	dbg("Device entry #%d. at $%p", devnum, uvd);
-
-	/* Not relying upon caller we increase module counter ourselves */
-	usbvideo_ClientIncModCount(uvd);
-
-	mutex_lock(&uvd->lock);
-	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
-		uvd->sbuf[i].urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
-		if (uvd->sbuf[i].urb == NULL) {
-			err("usb_alloc_urb(%d.) failed.", FRAMES_PER_DESC);
-			uvd->uvd_used = 0;
-			uvd = NULL;
-			goto allocate_done;
-		}
-	}
-	uvd->user=0;
-	uvd->remove_pending = 0;
-	uvd->last_error = 0;
-	RingQueue_Initialize(&uvd->dp);
-
-	/* Initialize video device structure */
-	uvd->vdev = usbvideo_template;
-	sprintf(uvd->vdev.name, "%.20s USB Camera", cams->drvName);
-	/*
-	 * The client is free to overwrite those because we
-	 * return control to the client's probe function right now.
-	 */
-allocate_done:
-	mutex_unlock(&uvd->lock);
-	usbvideo_ClientDecModCount(uvd);
-	return uvd;
-}
-
-EXPORT_SYMBOL(usbvideo_AllocateDevice);
-
-int usbvideo_RegisterVideoDevice(struct uvd *uvd)
-{
-	char tmp1[20], tmp2[20];	/* Buffers for printing */
-
-	if (uvd == NULL) {
-		err("%s: Illegal call.", __func__);
-		return -EINVAL;
-	}
-	if (uvd->video_endp == 0) {
-		dev_info(&uvd->dev->dev,
-			 "%s: No video endpoint specified; data pump disabled.\n",
-			 __func__);
-	}
-	if (uvd->paletteBits == 0) {
-		err("%s: No palettes specified!", __func__);
-		return -EINVAL;
-	}
-	if (uvd->defaultPalette == 0) {
-		dev_info(&uvd->dev->dev, "%s: No default palette!\n",
-			 __func__);
-	}
-
-	uvd->max_frame_size = VIDEOSIZE_X(uvd->canvas) *
-		VIDEOSIZE_Y(uvd->canvas) * V4L_BYTES_PER_PIXEL;
-	usbvideo_VideosizeToString(tmp1, sizeof(tmp1), uvd->videosize);
-	usbvideo_VideosizeToString(tmp2, sizeof(tmp2), uvd->canvas);
-
-	if (uvd->debug > 0) {
-		dev_info(&uvd->dev->dev,
-			 "%s: iface=%d. endpoint=$%02x paletteBits=$%08lx\n",
-			 __func__, uvd->iface, uvd->video_endp,
-			 uvd->paletteBits);
-	}
-	if (uvd->dev == NULL) {
-		err("%s: uvd->dev == NULL", __func__);
-		return -EINVAL;
-	}
-	uvd->vdev.parent = &uvd->dev->dev;
-	uvd->vdev.release = video_device_release_empty;
-	if (video_register_device(&uvd->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
-		err("%s: video_register_device failed", __func__);
-		return -EPIPE;
-	}
-	if (uvd->debug > 1) {
-		dev_info(&uvd->dev->dev,
-			 "%s: video_register_device() successful\n", __func__);
-	}
-
-	dev_info(&uvd->dev->dev, "%s on %s: canvas=%s videosize=%s\n",
-		 (uvd->handle != NULL) ? uvd->handle->drvName : "???",
-		 video_device_node_name(&uvd->vdev), tmp2, tmp1);
-
-	usb_get_dev(uvd->dev);
-	return 0;
-}
-
-EXPORT_SYMBOL(usbvideo_RegisterVideoDevice);
-
-/* ******************************************************************** */
-
-static int usbvideo_v4l_mmap(struct file *file, struct vm_area_struct *vma)
-{
-	struct uvd *uvd = file->private_data;
-	unsigned long start = vma->vm_start;
-	unsigned long size  = vma->vm_end-vma->vm_start;
-	unsigned long page, pos;
-
-	if (!CAMERA_IS_OPERATIONAL(uvd))
-		return -EFAULT;
-
-	if (size > (((USBVIDEO_NUMFRAMES * uvd->max_frame_size) + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1)))
-		return -EINVAL;
-
-	pos = (unsigned long) uvd->fbuf;
-	while (size > 0) {
-		page = vmalloc_to_pfn((void *)pos);
-		if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
-			return -EAGAIN;
-
-		start += PAGE_SIZE;
-		pos += PAGE_SIZE;
-		if (size > PAGE_SIZE)
-			size -= PAGE_SIZE;
-		else
-			size = 0;
-	}
-
-	return 0;
-}
-
-/*
- * usbvideo_v4l_open()
- *
- * This is part of Video 4 Linux API. The driver can be opened by one
- * client only (checks internal counter 'uvdser'). The procedure
- * then allocates buffers needed for video processing.
- *
- * History:
- * 22-Jan-2000 Rewrote, moved scratch buffer allocation here. Now the
- *             camera is also initialized here (once per connect), at
- *             expense of V4L client (it waits on open() call).
- * 27-Jan-2000 Used USBVIDEO_NUMSBUF as number of URB buffers.
- * 24-May-2000 Corrected to prevent race condition (MOD_xxx_USE_COUNT).
- */
-static int usbvideo_v4l_open(struct file *file)
-{
-	struct video_device *dev = video_devdata(file);
-	struct uvd *uvd = (struct uvd *) dev;
-	const int sb_size = FRAMES_PER_DESC * uvd->iso_packet_len;
-	int i, errCode = 0;
-
-	if (uvd->debug > 1)
-		dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, dev);
-
-	if (usbvideo_ClientIncModCount(uvd) < 0)
-		return -ENODEV;
-	mutex_lock(&uvd->lock);
-
-	if (uvd->user) {
-		err("%s: Someone tried to open an already opened device!", __func__);
-		errCode = -EBUSY;
-	} else {
-		/* Clear statistics */
-		memset(&uvd->stats, 0, sizeof(uvd->stats));
-
-		/* Clean pointers so we know if we allocated something */
-		for (i=0; i < USBVIDEO_NUMSBUF; i++)
-			uvd->sbuf[i].data = NULL;
-
-		/* Allocate memory for the frame buffers */
-		uvd->fbuf_size = USBVIDEO_NUMFRAMES * uvd->max_frame_size;
-		uvd->fbuf = usbvideo_rvmalloc(uvd->fbuf_size);
-		RingQueue_Allocate(&uvd->dp, RING_QUEUE_SIZE);
-		if ((uvd->fbuf == NULL) ||
-		    (!RingQueue_IsAllocated(&uvd->dp))) {
-			err("%s: Failed to allocate fbuf or dp", __func__);
-			errCode = -ENOMEM;
-		} else {
-			/* Allocate all buffers */
-			for (i=0; i < USBVIDEO_NUMFRAMES; i++) {
-				uvd->frame[i].frameState = FrameState_Unused;
-				uvd->frame[i].data = uvd->fbuf + i*(uvd->max_frame_size);
-				/*
-				 * Set default sizes in case IOCTL (VIDIOCMCAPTURE)
-				 * is not used (using read() instead).
-				 */
-				uvd->frame[i].canvas = uvd->canvas;
-				uvd->frame[i].seqRead_Index = 0;
-			}
-			for (i=0; i < USBVIDEO_NUMSBUF; i++) {
-				uvd->sbuf[i].data = kmalloc(sb_size, GFP_KERNEL);
-				if (uvd->sbuf[i].data == NULL) {
-					errCode = -ENOMEM;
-					break;
-				}
-			}
-		}
-		if (errCode != 0) {
-			/* Have to free all that memory */
-			if (uvd->fbuf != NULL) {
-				usbvideo_rvfree(uvd->fbuf, uvd->fbuf_size);
-				uvd->fbuf = NULL;
-			}
-			RingQueue_Free(&uvd->dp);
-			for (i=0; i < USBVIDEO_NUMSBUF; i++) {
-				kfree(uvd->sbuf[i].data);
-				uvd->sbuf[i].data = NULL;
-			}
-		}
-	}
-
-	/* If so far no errors then we shall start the camera */
-	if (errCode == 0) {
-		/* Start data pump if we have valid endpoint */
-		if (uvd->video_endp != 0)
-			errCode = GET_CALLBACK(uvd, startDataPump)(uvd);
-		if (errCode == 0) {
-			if (VALID_CALLBACK(uvd, setupOnOpen)) {
-				if (uvd->debug > 1)
-					dev_info(&uvd->dev->dev,
-						 "%s: setupOnOpen callback\n",
-						 __func__);
-				errCode = GET_CALLBACK(uvd, setupOnOpen)(uvd);
-				if (errCode < 0) {
-					err("%s: setupOnOpen callback failed (%d.).",
-					    __func__, errCode);
-				} else if (uvd->debug > 1) {
-					dev_info(&uvd->dev->dev,
-						 "%s: setupOnOpen callback successful\n",
-						 __func__);
-				}
-			}
-			if (errCode == 0) {
-				uvd->settingsAdjusted = 0;
-				if (uvd->debug > 1)
-					dev_info(&uvd->dev->dev,
-						 "%s: Open succeeded.\n",
-						 __func__);
-				uvd->user++;
-				file->private_data = uvd;
-			}
-		}
-	}
-	mutex_unlock(&uvd->lock);
-	if (errCode != 0)
-		usbvideo_ClientDecModCount(uvd);
-	if (uvd->debug > 0)
-		dev_info(&uvd->dev->dev, "%s: Returning %d.\n", __func__,
-			 errCode);
-	return errCode;
-}
-
-/*
- * usbvideo_v4l_close()
- *
- * This is part of Video 4 Linux API. The procedure
- * stops streaming and deallocates all buffers that were earlier
- * allocated in usbvideo_v4l_open().
- *
- * History:
- * 22-Jan-2000 Moved scratch buffer deallocation here.
- * 27-Jan-2000 Used USBVIDEO_NUMSBUF as number of URB buffers.
- * 24-May-2000 Moved MOD_DEC_USE_COUNT outside of code that can sleep.
- */
-static int usbvideo_v4l_close(struct file *file)
-{
-	struct video_device *dev = file->private_data;
-	struct uvd *uvd = (struct uvd *) dev;
-	int i;
-
-	if (uvd->debug > 1)
-		dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, dev);
-
-	mutex_lock(&uvd->lock);
-	GET_CALLBACK(uvd, stopDataPump)(uvd);
-	usbvideo_rvfree(uvd->fbuf, uvd->fbuf_size);
-	uvd->fbuf = NULL;
-	RingQueue_Free(&uvd->dp);
-
-	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
-		kfree(uvd->sbuf[i].data);
-		uvd->sbuf[i].data = NULL;
-	}
-
-#if USBVIDEO_REPORT_STATS
-	usbvideo_ReportStatistics(uvd);
-#endif
-
-	uvd->user--;
-	if (uvd->remove_pending) {
-		if (uvd->debug > 0)
-			dev_info(&uvd->dev->dev, "%s: Final disconnect.\n",
-				 __func__);
-		usbvideo_CameraRelease(uvd);
-	}
-	mutex_unlock(&uvd->lock);
-	usbvideo_ClientDecModCount(uvd);
-
-	if (uvd->debug > 1)
-		dev_info(&uvd->dev->dev, "%s: Completed.\n", __func__);
-	file->private_data = NULL;
-	return 0;
-}
-
-/*
- * usbvideo_v4l_ioctl()
- *
- * This is part of Video 4 Linux API. The procedure handles ioctl() calls.
- *
- * History:
- * 22-Jan-2000 Corrected VIDIOCSPICT to reject unsupported settings.
- */
-static long usbvideo_v4l_do_ioctl(struct file *file, unsigned int cmd, void *arg)
-{
-	struct uvd *uvd = file->private_data;
-
-	if (!CAMERA_IS_OPERATIONAL(uvd))
-		return -EIO;
-
-	switch (cmd) {
-		case VIDIOCGCAP:
-		{
-			struct video_capability *b = arg;
-			*b = uvd->vcap;
-			return 0;
-		}
-		case VIDIOCGCHAN:
-		{
-			struct video_channel *v = arg;
-			*v = uvd->vchan;
-			return 0;
-		}
-		case VIDIOCSCHAN:
-		{
-			struct video_channel *v = arg;
-			if (v->channel != 0)
-				return -EINVAL;
-			return 0;
-		}
-		case VIDIOCGPICT:
-		{
-			struct video_picture *pic = arg;
-			*pic = uvd->vpic;
-			return 0;
-		}
-		case VIDIOCSPICT:
-		{
-			struct video_picture *pic = arg;
-			/*
-			 * Use temporary 'video_picture' structure to preserve our
-			 * own settings (such as color depth, palette) that we
-			 * aren't allowing everyone (V4L client) to change.
-			 */
-			uvd->vpic.brightness = pic->brightness;
-			uvd->vpic.hue = pic->hue;
-			uvd->vpic.colour = pic->colour;
-			uvd->vpic.contrast = pic->contrast;
-			uvd->settingsAdjusted = 0;	/* Will force new settings */
-			return 0;
-		}
-		case VIDIOCSWIN:
-		{
-			struct video_window *vw = arg;
-
-			if(VALID_CALLBACK(uvd, setVideoMode)) {
-				return GET_CALLBACK(uvd, setVideoMode)(uvd, vw);
-			}
-
-			if (vw->flags)
-				return -EINVAL;
-			if (vw->clipcount)
-				return -EINVAL;
-			if (vw->width != VIDEOSIZE_X(uvd->canvas))
-				return -EINVAL;
-			if (vw->height != VIDEOSIZE_Y(uvd->canvas))
-				return -EINVAL;
-
-			return 0;
-		}
-		case VIDIOCGWIN:
-		{
-			struct video_window *vw = arg;
-
-			vw->x = 0;
-			vw->y = 0;
-			vw->width = VIDEOSIZE_X(uvd->videosize);
-			vw->height = VIDEOSIZE_Y(uvd->videosize);
-			vw->chromakey = 0;
-			if (VALID_CALLBACK(uvd, getFPS))
-				vw->flags = GET_CALLBACK(uvd, getFPS)(uvd);
-			else
-				vw->flags = 10; /* FIXME: do better! */
-			return 0;
-		}
-		case VIDIOCGMBUF:
-		{
-			struct video_mbuf *vm = arg;
-			int i;
-
-			memset(vm, 0, sizeof(*vm));
-			vm->size = uvd->max_frame_size * USBVIDEO_NUMFRAMES;
-			vm->frames = USBVIDEO_NUMFRAMES;
-			for(i = 0; i < USBVIDEO_NUMFRAMES; i++)
-			  vm->offsets[i] = i * uvd->max_frame_size;
-
-			return 0;
-		}
-		case VIDIOCMCAPTURE:
-		{
-			struct video_mmap *vm = arg;
-
-			if (uvd->debug >= 1) {
-				dev_info(&uvd->dev->dev,
-					 "VIDIOCMCAPTURE: frame=%d. size=%dx%d, format=%d.\n",
-					 vm->frame, vm->width, vm->height, vm->format);
-			}
-			/*
-			 * Check if the requested size is supported. If the requestor
-			 * requests too big a frame then we may be tricked into accessing
-			 * outside of own preallocated frame buffer (in uvd->frame).
-			 * This will cause oops or a security hole. Theoretically, we
-			 * could only clamp the size down to acceptable bounds, but then
-			 * we'd need to figure out how to insert our smaller buffer into
-			 * larger caller's buffer... this is not an easy question. So we
-			 * here just flatly reject too large requests, assuming that the
-			 * caller will resubmit with smaller size. Callers should know
-			 * what size we support (returned by VIDIOCGCAP). However vidcat,
-			 * for one, does not care and allows to ask for any size.
-			 */
-			if ((vm->width > VIDEOSIZE_X(uvd->canvas)) ||
-			    (vm->height > VIDEOSIZE_Y(uvd->canvas))) {
-				if (uvd->debug > 0) {
-					dev_info(&uvd->dev->dev,
-						 "VIDIOCMCAPTURE: Size=%dx%d "
-						 "too large; allowed only up "
-						 "to %ldx%ld\n", vm->width,
-						 vm->height,
-						 VIDEOSIZE_X(uvd->canvas),
-						 VIDEOSIZE_Y(uvd->canvas));
-				}
-				return -EINVAL;
-			}
-			/* Check if the palette is supported */
-			if (((1L << vm->format) & uvd->paletteBits) == 0) {
-				if (uvd->debug > 0) {
-					dev_info(&uvd->dev->dev,
-						 "VIDIOCMCAPTURE: format=%d. "
-						 "not supported "
-						 "(paletteBits=$%08lx)\n",
-						 vm->format, uvd->paletteBits);
-				}
-				return -EINVAL;
-			}
-			if ((vm->frame < 0) || (vm->frame >= USBVIDEO_NUMFRAMES)) {
-				err("VIDIOCMCAPTURE: vm.frame=%d. !E [0-%d]", vm->frame, USBVIDEO_NUMFRAMES-1);
-				return -EINVAL;
-			}
-			if (uvd->frame[vm->frame].frameState == FrameState_Grabbing) {
-				/* Not an error - can happen */
-			}
-			uvd->frame[vm->frame].request = VIDEOSIZE(vm->width, vm->height);
-			uvd->frame[vm->frame].palette = vm->format;
-
-			/* Mark it as ready */
-			uvd->frame[vm->frame].frameState = FrameState_Ready;
-
-			return usbvideo_NewFrame(uvd, vm->frame);
-		}
-		case VIDIOCSYNC:
-		{
-			int *frameNum = arg;
-			int ret;
-
-			if (*frameNum < 0 || *frameNum >= USBVIDEO_NUMFRAMES)
-				return -EINVAL;
-
-			if (uvd->debug >= 1)
-				dev_info(&uvd->dev->dev,
-					 "VIDIOCSYNC: syncing to frame %d.\n",
-					 *frameNum);
-			if (uvd->flags & FLAGS_NO_DECODING)
-				ret = usbvideo_GetFrame(uvd, *frameNum);
-			else if (VALID_CALLBACK(uvd, getFrame)) {
-				ret = GET_CALLBACK(uvd, getFrame)(uvd, *frameNum);
-				if ((ret < 0) && (uvd->debug >= 1)) {
-					err("VIDIOCSYNC: getFrame() returned %d.", ret);
-				}
-			} else {
-				err("VIDIOCSYNC: getFrame is not set");
-				ret = -EFAULT;
-			}
-
-			/*
-			 * The frame is in FrameState_Done_Hold state. Release it
-			 * right now because its data is already mapped into
-			 * the user space and it's up to the application to
-			 * make use of it until it asks for another frame.
-			 */
-			uvd->frame[*frameNum].frameState = FrameState_Unused;
-			return ret;
-		}
-		case VIDIOCGFBUF:
-		{
-			struct video_buffer *vb = arg;
-
-			memset(vb, 0, sizeof(*vb));
-			return 0;
-		}
-		case VIDIOCKEY:
-			return 0;
-
-		case VIDIOCCAPTURE:
-			return -EINVAL;
-
-		case VIDIOCSFBUF:
-
-		case VIDIOCGTUNER:
-		case VIDIOCSTUNER:
-
-		case VIDIOCGFREQ:
-		case VIDIOCSFREQ:
-
-		case VIDIOCGAUDIO:
-		case VIDIOCSAUDIO:
-			return -EINVAL;
-
-		default:
-			return -ENOIOCTLCMD;
-	}
-	return 0;
-}
-
-static long usbvideo_v4l_ioctl(struct file *file,
-		       unsigned int cmd, unsigned long arg)
-{
-	return video_usercopy(file, cmd, arg, usbvideo_v4l_do_ioctl);
-}
-
-/*
- * usbvideo_v4l_read()
- *
- * This is mostly boring stuff. We simply ask for a frame and when it
- * arrives copy all the video data from it into user space. There is
- * no obvious need to override this method.
- *
- * History:
- * 20-Oct-2000 Created.
- * 01-Nov-2000 Added mutex (uvd->lock).
- */
-static ssize_t usbvideo_v4l_read(struct file *file, char __user *buf,
-		      size_t count, loff_t *ppos)
-{
-	struct uvd *uvd = file->private_data;
-	int noblock = file->f_flags & O_NONBLOCK;
-	int frmx = -1, i;
-	struct usbvideo_frame *frame;
-
-	if (!CAMERA_IS_OPERATIONAL(uvd) || (buf == NULL))
-		return -EFAULT;
-
-	if (uvd->debug >= 1)
-		dev_info(&uvd->dev->dev,
-			 "%s: %Zd. bytes, noblock=%d.\n",
-			 __func__, count, noblock);
-
-	mutex_lock(&uvd->lock);
-
-	/* See if a frame is completed, then use it. */
-	for(i = 0; i < USBVIDEO_NUMFRAMES; i++) {
-		if ((uvd->frame[i].frameState == FrameState_Done) ||
-		    (uvd->frame[i].frameState == FrameState_Done_Hold) ||
-		    (uvd->frame[i].frameState == FrameState_Error)) {
-			frmx = i;
-			break;
-		}
-	}
-
-	/* FIXME: If we don't start a frame here then who ever does? */
-	if (noblock && (frmx == -1)) {
-		count = -EAGAIN;
-		goto read_done;
-	}
-
-	/*
-	 * If no FrameState_Done, look for a FrameState_Grabbing state.
-	 * See if a frame is in process (grabbing), then use it.
-	 * We will need to wait until it becomes cooked, of course.
-	 */
-	if (frmx == -1) {
-		for(i = 0; i < USBVIDEO_NUMFRAMES; i++) {
-			if (uvd->frame[i].frameState == FrameState_Grabbing) {
-				frmx = i;
-				break;
-			}
-		}
-	}
-
-	/*
-	 * If no frame is active, start one. We don't care which one
-	 * it will be, so #0 is as good as any.
-	 * In read access mode we don't have convenience of VIDIOCMCAPTURE
-	 * to specify the requested palette (video format) on per-frame
-	 * basis. This means that we have to return data in -some- format
-	 * and just hope that the client knows what to do with it.
-	 * The default format is configured in uvd->defaultPalette field
-	 * as one of VIDEO_PALETTE_xxx values. We stuff it into the new
-	 * frame and initiate the frame filling process.
-	 */
-	if (frmx == -1) {
-		if (uvd->defaultPalette == 0) {
-			err("%s: No default palette; don't know what to do!", __func__);
-			count = -EFAULT;
-			goto read_done;
-		}
-		frmx = 0;
-		/*
-		 * We have no per-frame control over video size.
-		 * Therefore we only can use whatever size was
-		 * specified as default.
-		 */
-		uvd->frame[frmx].request = uvd->videosize;
-		uvd->frame[frmx].palette = uvd->defaultPalette;
-		uvd->frame[frmx].frameState = FrameState_Ready;
-		usbvideo_NewFrame(uvd, frmx);
-		/* Now frame 0 is supposed to start filling... */
-	}
-
-	/*
-	 * Get a pointer to the active frame. It is either previously
-	 * completed frame or frame in progress but not completed yet.
-	 */
-	frame = &uvd->frame[frmx];
-
-	/*
-	 * Sit back & wait until the frame gets filled and postprocessed.
-	 * If we fail to get the picture [in time] then return the error.
-	 * In this call we specify that we want the frame to be waited for,
-	 * postprocessed and switched into FrameState_Done_Hold state. This
-	 * state is used to hold the frame as "fully completed" between
-	 * subsequent partial reads of the same frame.
-	 */
-	if (frame->frameState != FrameState_Done_Hold) {
-		long rv = -EFAULT;
-		if (uvd->flags & FLAGS_NO_DECODING)
-			rv = usbvideo_GetFrame(uvd, frmx);
-		else if (VALID_CALLBACK(uvd, getFrame))
-			rv = GET_CALLBACK(uvd, getFrame)(uvd, frmx);
-		else
-			err("getFrame is not set");
-		if ((rv != 0) || (frame->frameState != FrameState_Done_Hold)) {
-			count = rv;
-			goto read_done;
-		}
-	}
-
-	/*
-	 * Copy bytes to user space. We allow for partial reads, which
-	 * means that the user application can request read less than
-	 * the full frame size. It is up to the application to issue
-	 * subsequent calls until entire frame is read.
-	 *
-	 * First things first, make sure we don't copy more than we
-	 * have - even if the application wants more. That would be
-	 * a big security embarassment!
-	 */
-	if ((count + frame->seqRead_Index) > frame->seqRead_Length)
-		count = frame->seqRead_Length - frame->seqRead_Index;
-
-	/*
-	 * Copy requested amount of data to user space. We start
-	 * copying from the position where we last left it, which
-	 * will be zero for a new frame (not read before).
-	 */
-	if (copy_to_user(buf, frame->data + frame->seqRead_Index, count)) {
-		count = -EFAULT;
-		goto read_done;
-	}
-
-	/* Update last read position */
-	frame->seqRead_Index += count;
-	if (uvd->debug >= 1) {
-		err("%s: {copy} count used=%Zd, new seqRead_Index=%ld",
-			__func__, count, frame->seqRead_Index);
-	}
-
-	/* Finally check if the frame is done with and "release" it */
-	if (frame->seqRead_Index >= frame->seqRead_Length) {
-		/* All data has been read */
-		frame->seqRead_Index = 0;
-
-		/* Mark it as available to be used again. */
-		uvd->frame[frmx].frameState = FrameState_Unused;
-		if (usbvideo_NewFrame(uvd, (frmx + 1) % USBVIDEO_NUMFRAMES)) {
-			err("%s: usbvideo_NewFrame failed.", __func__);
-		}
-	}
-read_done:
-	mutex_unlock(&uvd->lock);
-	return count;
-}
-
-/*
- * Make all of the blocks of data contiguous
- */
-static int usbvideo_CompressIsochronous(struct uvd *uvd, struct urb *urb)
-{
-	char *cdata;
-	int i, totlen = 0;
-
-	for (i = 0; i < urb->number_of_packets; i++) {
-		int n = urb->iso_frame_desc[i].actual_length;
-		int st = urb->iso_frame_desc[i].status;
-
-		cdata = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
-
-		/* Detect and ignore errored packets */
-		if (st < 0) {
-			if (uvd->debug >= 1)
-				err("Data error: packet=%d. len=%d. status=%d.", i, n, st);
-			uvd->stats.iso_err_count++;
-			continue;
-		}
-
-		/* Detect and ignore empty packets */
-		if (n <= 0) {
-			uvd->stats.iso_skip_count++;
-			continue;
-		}
-		totlen += n;	/* Little local accounting */
-		RingQueue_Enqueue(&uvd->dp, cdata, n);
-	}
-	return totlen;
-}
-
-static void usbvideo_IsocIrq(struct urb *urb)
-{
-	int i, ret, len;
-	struct uvd *uvd = urb->context;
-
-	/* We don't want to do anything if we are about to be removed! */
-	if (!CAMERA_IS_OPERATIONAL(uvd))
-		return;
-#if 0
-	if (urb->actual_length > 0) {
-		dev_info(&uvd->dev->dev,
-			 "urb=$%p status=%d. errcount=%d. length=%d.\n",
-			 urb, urb->status, urb->error_count,
-			 urb->actual_length);
-	} else {
-		static int c = 0;
-		if (c++ % 100 == 0)
-			dev_info(&uvd->dev->dev, "No Isoc data\n");
-	}
-#endif
-
-	if (!uvd->streaming) {
-		if (uvd->debug >= 1)
-			dev_info(&uvd->dev->dev,
-				 "Not streaming, but interrupt!\n");
-		return;
-	}
-
-	uvd->stats.urb_count++;
-	if (urb->actual_length <= 0)
-		goto urb_done_with;
-
-	/* Copy the data received into ring queue */
-	len = usbvideo_CompressIsochronous(uvd, urb);
-	uvd->stats.urb_length = len;
-	if (len <= 0)
-		goto urb_done_with;
-
-	/* Here we got some data */
-	uvd->stats.data_count += len;
-	RingQueue_WakeUpInterruptible(&uvd->dp);
-
-urb_done_with:
-	for (i = 0; i < FRAMES_PER_DESC; i++) {
-		urb->iso_frame_desc[i].status = 0;
-		urb->iso_frame_desc[i].actual_length = 0;
-	}
-	urb->status = 0;
-	urb->dev = uvd->dev;
-	ret = usb_submit_urb (urb, GFP_KERNEL);
-	if(ret)
-		err("usb_submit_urb error (%d)", ret);
-	return;
-}
-
-/*
- * usbvideo_StartDataPump()
- *
- * History:
- * 27-Jan-2000 Used ibmcam->iface, ibmcam->ifaceAltActive instead
- *             of hardcoded values. Simplified by using for loop,
- *             allowed any number of URBs.
- */
-static int usbvideo_StartDataPump(struct uvd *uvd)
-{
-	struct usb_device *dev = uvd->dev;
-	int i, errFlag;
-
-	if (uvd->debug > 1)
-		dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, uvd);
-
-	if (!CAMERA_IS_OPERATIONAL(uvd)) {
-		err("%s: Camera is not operational", __func__);
-		return -EFAULT;
-	}
-	uvd->curframe = -1;
-
-	/* Alternate interface 1 is is the biggest frame size */
-	i = usb_set_interface(dev, uvd->iface, uvd->ifaceAltActive);
-	if (i < 0) {
-		err("%s: usb_set_interface error", __func__);
-		uvd->last_error = i;
-		return -EBUSY;
-	}
-	if (VALID_CALLBACK(uvd, videoStart))
-		GET_CALLBACK(uvd, videoStart)(uvd);
-	else
-		err("%s: videoStart not set", __func__);
-
-	/* We double buffer the Iso lists */
-	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
-		int j, k;
-		struct urb *urb = uvd->sbuf[i].urb;
-		urb->dev = dev;
-		urb->context = uvd;
-		urb->pipe = usb_rcvisocpipe(dev, uvd->video_endp);
-		urb->interval = 1;
-		urb->transfer_flags = URB_ISO_ASAP;
-		urb->transfer_buffer = uvd->sbuf[i].data;
-		urb->complete = usbvideo_IsocIrq;
-		urb->number_of_packets = FRAMES_PER_DESC;
-		urb->transfer_buffer_length = uvd->iso_packet_len * FRAMES_PER_DESC;
-		for (j=k=0; j < FRAMES_PER_DESC; j++, k += uvd->iso_packet_len) {
-			urb->iso_frame_desc[j].offset = k;
-			urb->iso_frame_desc[j].length = uvd->iso_packet_len;
-		}
-	}
-
-	/* Submit all URBs */
-	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
-		errFlag = usb_submit_urb(uvd->sbuf[i].urb, GFP_KERNEL);
-		if (errFlag)
-			err("%s: usb_submit_isoc(%d) ret %d", __func__, i, errFlag);
-	}
-
-	uvd->streaming = 1;
-	if (uvd->debug > 1)
-		dev_info(&uvd->dev->dev,
-			 "%s: streaming=1 video_endp=$%02x\n", __func__,
-			 uvd->video_endp);
-	return 0;
-}
-
-/*
- * usbvideo_StopDataPump()
- *
- * This procedure stops streaming and deallocates URBs. Then it
- * activates zero-bandwidth alt. setting of the video interface.
- *
- * History:
- * 22-Jan-2000 Corrected order of actions to work after surprise removal.
- * 27-Jan-2000 Used uvd->iface, uvd->ifaceAltInactive instead of hardcoded values.
- */
-static void usbvideo_StopDataPump(struct uvd *uvd)
-{
-	int i, j;
-
-	if ((uvd == NULL) || (!uvd->streaming) || (uvd->dev == NULL))
-		return;
-
-	if (uvd->debug > 1)
-		dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, uvd);
-
-	/* Unschedule all of the iso td's */
-	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
-		usb_kill_urb(uvd->sbuf[i].urb);
-	}
-	if (uvd->debug > 1)
-		dev_info(&uvd->dev->dev, "%s: streaming=0\n", __func__);
-	uvd->streaming = 0;
-
-	if (!uvd->remove_pending) {
-		/* Invoke minidriver's magic to stop the camera */
-		if (VALID_CALLBACK(uvd, videoStop))
-			GET_CALLBACK(uvd, videoStop)(uvd);
-		else
-			err("%s: videoStop not set", __func__);
-
-		/* Set packet size to 0 */
-		j = usb_set_interface(uvd->dev, uvd->iface, uvd->ifaceAltInactive);
-		if (j < 0) {
-			err("%s: usb_set_interface() error %d.", __func__, j);
-			uvd->last_error = j;
-		}
-	}
-}
-
-/*
- * usbvideo_NewFrame()
- *
- * History:
- * 29-Mar-00 Added copying of previous frame into the current one.
- * 6-Aug-00  Added model 3 video sizes, removed redundant width, height.
- */
-static int usbvideo_NewFrame(struct uvd *uvd, int framenum)
-{
-	struct usbvideo_frame *frame;
-	int n;
-
-	if (uvd->debug > 1)
-		dev_info(&uvd->dev->dev, "usbvideo_NewFrame($%p,%d.)\n", uvd,
-			 framenum);
-
-	/* If we're not grabbing a frame right now and the other frame is */
-	/*  ready to be grabbed into, then use it instead */
-	if (uvd->curframe != -1)
-		return 0;
-
-	/* If necessary we adjust picture settings between frames */
-	if (!uvd->settingsAdjusted) {
-		if (VALID_CALLBACK(uvd, adjustPicture))
-			GET_CALLBACK(uvd, adjustPicture)(uvd);
-		uvd->settingsAdjusted = 1;
-	}
-
-	n = (framenum + 1) % USBVIDEO_NUMFRAMES;
-	if (uvd->frame[n].frameState == FrameState_Ready)
-		framenum = n;
-
-	frame = &uvd->frame[framenum];
-
-	frame->frameState = FrameState_Grabbing;
-	frame->scanstate = ScanState_Scanning;
-	frame->seqRead_Length = 0;	/* Accumulated in xxx_parse_data() */
-	frame->deinterlace = Deinterlace_None;
-	frame->flags = 0; /* No flags yet, up to minidriver (or us) to set them */
-	uvd->curframe = framenum;
-
-	/*
-	 * Normally we would want to copy previous frame into the current one
-	 * before we even start filling it with data; this allows us to stop
-	 * filling at any moment; top portion of the frame will be new and
-	 * bottom portion will stay as it was in previous frame. If we don't
-	 * do that then missing chunks of video stream will result in flickering
-	 * portions of old data whatever it was before.
-	 *
-	 * If we choose not to copy previous frame (to, for example, save few
-	 * bus cycles - the frame can be pretty large!) then we have an option
-	 * to clear the frame before using. If we experience losses in this
-	 * mode then missing picture will be black (no flickering).
-	 *
-	 * Finally, if user chooses not to clean the current frame before
-	 * filling it with data then the old data will be visible if we fail
-	 * to refill entire frame with new data.
-	 */
-	if (!(uvd->flags & FLAGS_SEPARATE_FRAMES)) {
-		/* This copies previous frame into this one to mask losses */
-		int prev = (framenum - 1 + USBVIDEO_NUMFRAMES) % USBVIDEO_NUMFRAMES;
-		memmove(frame->data, uvd->frame[prev].data, uvd->max_frame_size);
-	} else {
-		if (uvd->flags & FLAGS_CLEAN_FRAMES) {
-			/* This provides a "clean" frame but slows things down */
-			memset(frame->data, 0, uvd->max_frame_size);
-		}
-	}
-	return 0;
-}
-
-/*
- * usbvideo_CollectRawData()
- *
- * This procedure can be used instead of 'processData' callback if you
- * only want to dump the raw data from the camera into the output
- * device (frame buffer). You can look at it with V4L client, but the
- * image will be unwatchable. The main purpose of this code and of the
- * mode FLAGS_NO_DECODING is debugging and capturing of datastreams from
- * new, unknown cameras. This procedure will be automatically invoked
- * instead of the specified callback handler when uvd->flags has bit
- * FLAGS_NO_DECODING set. Therefore, any regular build of any driver
- * based on usbvideo can use this feature at any time.
- */
-static void usbvideo_CollectRawData(struct uvd *uvd, struct usbvideo_frame *frame)
-{
-	int n;
-
-	assert(uvd != NULL);
-	assert(frame != NULL);
-
-	/* Try to move data from queue into frame buffer */
-	n = RingQueue_GetLength(&uvd->dp);
-	if (n > 0) {
-		int m;
-		/* See how much space we have left */
-		m = uvd->max_frame_size - frame->seqRead_Length;
-		if (n > m)
-			n = m;
-		/* Now move that much data into frame buffer */
-		RingQueue_Dequeue(
-			&uvd->dp,
-			frame->data + frame->seqRead_Length,
-			m);
-		frame->seqRead_Length += m;
-	}
-	/* See if we filled the frame */
-	if (frame->seqRead_Length >= uvd->max_frame_size) {
-		frame->frameState = FrameState_Done;
-		uvd->curframe = -1;
-		uvd->stats.frame_num++;
-	}
-}
-
-static int usbvideo_GetFrame(struct uvd *uvd, int frameNum)
-{
-	struct usbvideo_frame *frame = &uvd->frame[frameNum];
-
-	if (uvd->debug >= 2)
-		dev_info(&uvd->dev->dev, "%s($%p,%d.)\n", __func__, uvd,
-			 frameNum);
-
-	switch (frame->frameState) {
-	case FrameState_Unused:
-		if (uvd->debug >= 2)
-			dev_info(&uvd->dev->dev, "%s: FrameState_Unused\n",
-				 __func__);
-		return -EINVAL;
-	case FrameState_Ready:
-	case FrameState_Grabbing:
-	case FrameState_Error:
-	{
-		int ntries, signalPending;
-	redo:
-		if (!CAMERA_IS_OPERATIONAL(uvd)) {
-			if (uvd->debug >= 2)
-				dev_info(&uvd->dev->dev,
-					 "%s: Camera is not operational (1)\n",
-					 __func__);
-			return -EIO;
-		}
-		ntries = 0;
-		do {
-			RingQueue_InterruptibleSleepOn(&uvd->dp);
-			signalPending = signal_pending(current);
-			if (!CAMERA_IS_OPERATIONAL(uvd)) {
-				if (uvd->debug >= 2)
-					dev_info(&uvd->dev->dev,
-						 "%s: Camera is not "
-						 "operational (2)\n", __func__);
-				return -EIO;
-			}
-			assert(uvd->fbuf != NULL);
-			if (signalPending) {
-				if (uvd->debug >= 2)
-					dev_info(&uvd->dev->dev,
-					"%s: Signal=$%08x\n", __func__,
-					signalPending);
-				if (uvd->flags & FLAGS_RETRY_VIDIOCSYNC) {
-					usbvideo_TestPattern(uvd, 1, 0);
-					uvd->curframe = -1;
-					uvd->stats.frame_num++;
-					if (uvd->debug >= 2)
-						dev_info(&uvd->dev->dev,
-							 "%s: Forced test "
-							 "pattern screen\n",
-							 __func__);
-					return 0;
-				} else {
-					/* Standard answer: Interrupted! */
-					if (uvd->debug >= 2)
-						dev_info(&uvd->dev->dev,
-							 "%s: Interrupted!\n",
-							 __func__);
-					return -EINTR;
-				}
-			} else {
-				/* No signals - we just got new data in dp queue */
-				if (uvd->flags & FLAGS_NO_DECODING)
-					usbvideo_CollectRawData(uvd, frame);
-				else if (VALID_CALLBACK(uvd, processData))
-					GET_CALLBACK(uvd, processData)(uvd, frame);
-				else
-					err("%s: processData not set", __func__);
-			}
-		} while (frame->frameState == FrameState_Grabbing);
-		if (uvd->debug >= 2) {
-			dev_info(&uvd->dev->dev,
-				 "%s: Grabbing done; state=%d. (%lu. bytes)\n",
-				 __func__, frame->frameState,
-				 frame->seqRead_Length);
-		}
-		if (frame->frameState == FrameState_Error) {
-			int ret = usbvideo_NewFrame(uvd, frameNum);
-			if (ret < 0) {
-				err("%s: usbvideo_NewFrame() failed (%d.)", __func__, ret);
-				return ret;
-			}
-			goto redo;
-		}
-		/* Note that we fall through to meet our destiny below */
-	}
-	case FrameState_Done:
-		/*
-		 * Do all necessary postprocessing of data prepared in
-		 * "interrupt" code and the collecting code above. The
-		 * frame gets marked as FrameState_Done by queue parsing code.
-		 * This status means that we collected enough data and
-		 * most likely processed it as we went through. However
-		 * the data may need postprocessing, such as deinterlacing
-		 * or picture adjustments implemented in software (horror!)
-		 *
-		 * As soon as the frame becomes "final" it gets promoted to
-		 * FrameState_Done_Hold status where it will remain until the
-		 * caller consumed all the video data from the frame. Then
-		 * the empty shell of ex-frame is thrown out for dogs to eat.
-		 * But we, worried about pets, will recycle the frame!
-		 */
-		uvd->stats.frame_num++;
-		if ((uvd->flags & FLAGS_NO_DECODING) == 0) {
-			if (VALID_CALLBACK(uvd, postProcess))
-				GET_CALLBACK(uvd, postProcess)(uvd, frame);
-			if (frame->flags & USBVIDEO_FRAME_FLAG_SOFTWARE_CONTRAST)
-				usbvideo_SoftwareContrastAdjustment(uvd, frame);
-		}
-		frame->frameState = FrameState_Done_Hold;
-		if (uvd->debug >= 2)
-			dev_info(&uvd->dev->dev,
-				 "%s: Entered FrameState_Done_Hold state.\n",
-				 __func__);
-		return 0;
-
-	case FrameState_Done_Hold:
-		/*
-		 * We stay in this state indefinitely until someone external,
-		 * like ioctl() or read() call finishes digesting the frame
-		 * data. Then it will mark the frame as FrameState_Unused and
-		 * it will be released back into the wild to roam freely.
-		 */
-		if (uvd->debug >= 2)
-			dev_info(&uvd->dev->dev,
-				 "%s: FrameState_Done_Hold state.\n",
-				 __func__);
-		return 0;
-	}
-
-	/* Catch-all for other cases. We shall not be here. */
-	err("%s: Invalid state %d.", __func__, frame->frameState);
-	frame->frameState = FrameState_Unused;
-	return 0;
-}
-
-/*
- * usbvideo_DeinterlaceFrame()
- *
- * This procedure deinterlaces the given frame. Some cameras produce
- * only half of scanlines - sometimes only even lines, sometimes only
- * odd lines. The deinterlacing method is stored in frame->deinterlace
- * variable.
- *
- * Here we scan the frame vertically and replace missing scanlines with
- * average between surrounding ones - before and after. If we have no
- * line above then we just copy next line. Similarly, if we need to
- * create a last line then preceding line is used.
- */
-void usbvideo_DeinterlaceFrame(struct uvd *uvd, struct usbvideo_frame *frame)
-{
-	if ((uvd == NULL) || (frame == NULL))
-		return;
-
-	if ((frame->deinterlace == Deinterlace_FillEvenLines) ||
-	    (frame->deinterlace == Deinterlace_FillOddLines))
-	{
-		const int v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL;
-		int i = (frame->deinterlace == Deinterlace_FillEvenLines) ? 0 : 1;
-
-		for (; i < VIDEOSIZE_Y(frame->request); i += 2) {
-			const unsigned char *fs1, *fs2;
-			unsigned char *fd;
-			int ip, in, j;	/* Previous and next lines */
-
-			/*
-			 * Need to average lines before and after 'i'.
-			 * If we go out of bounds seeking those lines then
-			 * we point back to existing line.
-			 */
-			ip = i - 1;	/* First, get rough numbers */
-			in = i + 1;
-
-			/* Now validate */
-			if (ip < 0)
-				ip = in;
-			if (in >= VIDEOSIZE_Y(frame->request))
-				in = ip;
-
-			/* Sanity check */
-			if ((ip < 0) || (in < 0) ||
-			    (ip >= VIDEOSIZE_Y(frame->request)) ||
-			    (in >= VIDEOSIZE_Y(frame->request)))
-			{
-				err("Error: ip=%d. in=%d. req.height=%ld.",
-				    ip, in, VIDEOSIZE_Y(frame->request));
-				break;
-			}
-
-			/* Now we need to average lines 'ip' and 'in' to produce line 'i' */
-			fs1 = frame->data + (v4l_linesize * ip);
-			fs2 = frame->data + (v4l_linesize * in);
-			fd = frame->data + (v4l_linesize * i);
-
-			/* Average lines around destination */
-			for (j=0; j < v4l_linesize; j++) {
-				fd[j] = (unsigned char)((((unsigned) fs1[j]) +
-							 ((unsigned)fs2[j])) >> 1);
-			}
-		}
-	}
-
-	/* Optionally display statistics on the screen */
-	if (uvd->flags & FLAGS_OVERLAY_STATS)
-		usbvideo_OverlayStats(uvd, frame);
-}
-
-EXPORT_SYMBOL(usbvideo_DeinterlaceFrame);
-
-/*
- * usbvideo_SoftwareContrastAdjustment()
- *
- * This code adjusts the contrast of the frame, assuming RGB24 format.
- * As most software image processing, this job is CPU-intensive.
- * Get a camera that supports hardware adjustment!
- *
- * History:
- * 09-Feb-2001  Created.
- */
-static void usbvideo_SoftwareContrastAdjustment(struct uvd *uvd,
-						struct usbvideo_frame *frame)
-{
-	int i, j, v4l_linesize;
-	signed long adj;
-	const int ccm = 128; /* Color correction median - see below */
-
-	if ((uvd == NULL) || (frame == NULL)) {
-		err("%s: Illegal call.", __func__);
-		return;
-	}
-	adj = (uvd->vpic.contrast - 0x8000) >> 8; /* -128..+127 = -ccm..+(ccm-1)*/
-	RESTRICT_TO_RANGE(adj, -ccm, ccm+1);
-	if (adj == 0) {
-		/* In rare case of no adjustment */
-		return;
-	}
-	v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL;
-	for (i=0; i < VIDEOSIZE_Y(frame->request); i++) {
-		unsigned char *fd = frame->data + (v4l_linesize * i);
-		for (j=0; j < v4l_linesize; j++) {
-			signed long v = (signed long) fd[j];
-			/* Magnify up to 2 times, reduce down to zero */
-			v = 128 + ((ccm + adj) * (v - 128)) / ccm;
-			RESTRICT_TO_RANGE(v, 0, 0xFF); /* Must flatten tails */
-			fd[j] = (unsigned char) v;
-		}
-	}
-}
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/usbvideo/usbvideo.h b/drivers/media/video/usbvideo/usbvideo.h
deleted file mode 100644
index c66985b..0000000
--- a/drivers/media/video/usbvideo/usbvideo.h
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef usbvideo_h
-#define	usbvideo_h
-
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include <linux/usb.h>
-#include <linux/mutex.h>
-
-/* Most helpful debugging aid */
-#define assert(expr) ((void) ((expr) ? 0 : (err("assert failed at line %d",__LINE__))))
-
-#define USBVIDEO_REPORT_STATS	1	/* Set to 0 to block statistics on close */
-
-/* Bit flags (options) */
-#define FLAGS_RETRY_VIDIOCSYNC		(1 << 0)
-#define	FLAGS_MONOCHROME		(1 << 1)
-#define FLAGS_DISPLAY_HINTS		(1 << 2)
-#define FLAGS_OVERLAY_STATS		(1 << 3)
-#define FLAGS_FORCE_TESTPATTERN		(1 << 4)
-#define FLAGS_SEPARATE_FRAMES		(1 << 5)
-#define FLAGS_CLEAN_FRAMES		(1 << 6)
-#define	FLAGS_NO_DECODING		(1 << 7)
-
-/* Bit flags for frames (apply to the frame where they are specified) */
-#define USBVIDEO_FRAME_FLAG_SOFTWARE_CONTRAST	(1 << 0)
-
-/* Camera capabilities (maximum) */
-#define CAMERA_URB_FRAMES       32
-#define CAMERA_MAX_ISO_PACKET   1023 /* 1022 actually sent by camera */
-#define FRAMES_PER_DESC		(CAMERA_URB_FRAMES)
-#define FRAME_SIZE_PER_DESC	(CAMERA_MAX_ISO_PACKET)
-
-/* This macro restricts an int variable to an inclusive range */
-#define RESTRICT_TO_RANGE(v,mi,ma) { if ((v) < (mi)) (v) = (mi); else if ((v) > (ma)) (v) = (ma); }
-
-#define V4L_BYTES_PER_PIXEL     3	/* Because we produce RGB24 */
-
-/*
- * Use this macro to construct constants for different video sizes.
- * We have to deal with different video sizes that have to be
- * configured in the device or compared against when we receive
- * a data. Normally one would define a bunch of VIDEOSIZE_x_by_y
- * #defines and that's the end of story. However this solution
- * does not allow to convert between real pixel sizes and the
- * constant (integer) value that may be used to tag a frame or
- * whatever. The set of macros below constructs videosize constants
- * from the pixel size and allows to reconstruct the pixel size
- * from the combined value later.
- */
-#define	VIDEOSIZE(x,y)	(((x) & 0xFFFFL) | (((y) & 0xFFFFL) << 16))
-#define	VIDEOSIZE_X(vs)	((vs) & 0xFFFFL)
-#define	VIDEOSIZE_Y(vs)	(((vs) >> 16) & 0xFFFFL)
-typedef unsigned long videosize_t;
-
-/*
- * This macro checks if the camera is still operational. The 'uvd'
- * pointer must be valid, uvd->dev must be valid, we are not
- * removing the device and the device has not erred on us.
- */
-#define CAMERA_IS_OPERATIONAL(uvd) (\
-	(uvd != NULL) && \
-	((uvd)->dev != NULL) && \
-	((uvd)->last_error == 0) && \
-	(!(uvd)->remove_pending))
-
-/*
- * We use macros to do YUV -> RGB conversion because this is
- * very important for speed and totally unimportant for size.
- *
- * YUV -> RGB Conversion
- * ---------------------
- *
- * B = 1.164*(Y-16)		    + 2.018*(V-128)
- * G = 1.164*(Y-16) - 0.813*(U-128) - 0.391*(V-128)
- * R = 1.164*(Y-16) + 1.596*(U-128)
- *
- * If you fancy integer arithmetics (as you should), hear this:
- *
- * 65536*B = 76284*(Y-16)		  + 132252*(V-128)
- * 65536*G = 76284*(Y-16) -  53281*(U-128) -  25625*(V-128)
- * 65536*R = 76284*(Y-16) + 104595*(U-128)
- *
- * Make sure the output values are within [0..255] range.
- */
-#define LIMIT_RGB(x) (((x) < 0) ? 0 : (((x) > 255) ? 255 : (x)))
-#define YUV_TO_RGB_BY_THE_BOOK(my,mu,mv,mr,mg,mb) { \
-    int mm_y, mm_yc, mm_u, mm_v, mm_r, mm_g, mm_b; \
-    mm_y = (my) - 16;  \
-    mm_u = (mu) - 128; \
-    mm_v = (mv) - 128; \
-    mm_yc= mm_y * 76284; \
-    mm_b = (mm_yc		+ 132252*mm_v	) >> 16; \
-    mm_g = (mm_yc -  53281*mm_u -  25625*mm_v	) >> 16; \
-    mm_r = (mm_yc + 104595*mm_u			) >> 16; \
-    mb = LIMIT_RGB(mm_b); \
-    mg = LIMIT_RGB(mm_g); \
-    mr = LIMIT_RGB(mm_r); \
-}
-
-#define	RING_QUEUE_SIZE		(128*1024)	/* Must be a power of 2 */
-#define	RING_QUEUE_ADVANCE_INDEX(rq,ind,n) (rq)->ind = ((rq)->ind + (n)) & ((rq)->length-1)
-#define	RING_QUEUE_DEQUEUE_BYTES(rq,n) RING_QUEUE_ADVANCE_INDEX(rq,ri,n)
-#define	RING_QUEUE_PEEK(rq,ofs) ((rq)->queue[((ofs) + (rq)->ri) & ((rq)->length-1)])
-
-struct RingQueue {
-	unsigned char *queue;	/* Data from the Isoc data pump */
-	int length;		/* How many bytes allocated for the queue */
-	int wi;			/* That's where we write */
-	int ri;			/* Read from here until you hit write index */
-	wait_queue_head_t wqh;	/* Processes waiting */
-};
-
-enum ScanState {
-	ScanState_Scanning,	/* Scanning for header */
-	ScanState_Lines		/* Parsing lines */
-};
-
-/* Completion states of the data parser */
-enum ParseState {
-	scan_Continue,		/* Just parse next item */
-	scan_NextFrame,		/* Frame done, send it to V4L */
-	scan_Out,		/* Not enough data for frame */
-	scan_EndParse		/* End parsing */
-};
-
-enum FrameState {
-	FrameState_Unused,	/* Unused (no MCAPTURE) */
-	FrameState_Ready,	/* Ready to start grabbing */
-	FrameState_Grabbing,	/* In the process of being grabbed into */
-	FrameState_Done,	/* Finished grabbing, but not been synced yet */
-	FrameState_Done_Hold,	/* Are syncing or reading */
-	FrameState_Error,	/* Something bad happened while processing */
-};
-
-/*
- * Some frames may contain only even or odd lines. This type
- * specifies what type of deinterlacing is required.
- */
-enum Deinterlace {
-	Deinterlace_None=0,
-	Deinterlace_FillOddLines,
-	Deinterlace_FillEvenLines
-};
-
-#define USBVIDEO_NUMFRAMES	2	/* How many frames we work with */
-#define USBVIDEO_NUMSBUF	2	/* How many URBs linked in a ring */
-
-/* This structure represents one Isoc request - URB and buffer */
-struct usbvideo_sbuf {
-	char *data;
-	struct urb *urb;
-};
-
-struct usbvideo_frame {
-	char *data;		/* Frame buffer */
-	unsigned long header;	/* Significant bits from the header */
-
-	videosize_t canvas;	/* The canvas (max. image) allocated */
-	videosize_t request;	/* That's what the application asked for */
-	unsigned short palette;	/* The desired format */
-
-	enum FrameState frameState;/* State of grabbing */
-	enum ScanState scanstate;	/* State of scanning */
-	enum Deinterlace deinterlace;
-	int flags;		/* USBVIDEO_FRAME_FLAG_xxx bit flags */
-
-	int curline;		/* Line of frame we're working on */
-
-	long seqRead_Length;	/* Raw data length of frame */
-	long seqRead_Index;	/* Amount of data that has been already read */
-
-	void *user;		/* Additional data that user may need */
-};
-
-/* Statistics that can be overlaid on screen */
-struct usbvideo_statistics {
-	unsigned long frame_num;	/* Sequential number of the frame */
-	unsigned long urb_count;        /* How many URBs we received so far */
-	unsigned long urb_length;       /* Length of last URB */
-	unsigned long data_count;       /* How many bytes we received */
-	unsigned long header_count;     /* How many frame headers we found */
-	unsigned long iso_skip_count;	/* How many empty ISO packets received */
-	unsigned long iso_err_count;	/* How many bad ISO packets received */
-};
-
-struct usbvideo;
-
-struct uvd {
-	struct video_device vdev;	/* Must be the first field! */
-	struct usb_device *dev;
-	struct usbvideo *handle;	/* Points back to the struct usbvideo */
-	void *user_data;		/* Camera-dependent data */
-	int user_size;			/* Size of that camera-dependent data */
-	int debug;			/* Debug level for usbvideo */
-	unsigned char iface;		/* Video interface number */
-	unsigned char video_endp;
-	unsigned char ifaceAltActive;
-	unsigned char ifaceAltInactive; /* Alt settings */
-	unsigned long flags;		/* FLAGS_USBVIDEO_xxx */
-	unsigned long paletteBits;	/* Which palettes we accept? */
-	unsigned short defaultPalette;	/* What palette to use for read() */
-	struct mutex lock;
-	int user;		/* user count for exclusive use */
-
-	videosize_t videosize;	/* Current setting */
-	videosize_t canvas;	/* This is the width,height of the V4L canvas */
-	int max_frame_size;	/* Bytes in one video frame */
-
-	int uvd_used;        	/* Is this structure in use? */
-	int streaming;		/* Are we streaming Isochronous? */
-	int grabbing;		/* Are we grabbing? */
-	int settingsAdjusted;	/* Have we adjusted contrast etc.? */
-	int last_error;		/* What calamity struck us? */
-
-	char *fbuf;		/* Videodev buffer area */
-	int fbuf_size;		/* Videodev buffer size */
-
-	int curframe;
-	int iso_packet_len;	/* Videomode-dependent, saves bus bandwidth */
-
-	struct RingQueue dp;	/* Isoc data pump */
-	struct usbvideo_frame frame[USBVIDEO_NUMFRAMES];
-	struct usbvideo_sbuf sbuf[USBVIDEO_NUMSBUF];
-
-	volatile int remove_pending;	/* If set then about to exit */
-
-	struct video_picture vpic, vpic_old;	/* Picture settings */
-	struct video_capability vcap;		/* Video capabilities */
-	struct video_channel vchan;	/* May be used for tuner support */
-	struct usbvideo_statistics stats;
-	char videoName[32];		/* Holds name like "video7" */
-};
-
-/*
- * usbvideo callbacks (virtual methods). They are set when usbvideo
- * services are registered. All of these default to NULL, except those
- * that default to usbvideo-provided methods.
- */
-struct usbvideo_cb {
-	int (*probe)(struct usb_interface *, const struct usb_device_id *);
-	void (*userFree)(struct uvd *);
-	void (*disconnect)(struct usb_interface *);
-	int (*setupOnOpen)(struct uvd *);
-	void (*videoStart)(struct uvd *);
-	void (*videoStop)(struct uvd *);
-	void (*processData)(struct uvd *, struct usbvideo_frame *);
-	void (*postProcess)(struct uvd *, struct usbvideo_frame *);
-	void (*adjustPicture)(struct uvd *);
-	int (*getFPS)(struct uvd *);
-	int (*overlayHook)(struct uvd *, struct usbvideo_frame *);
-	int (*getFrame)(struct uvd *, int);
-	int (*startDataPump)(struct uvd *uvd);
-	void (*stopDataPump)(struct uvd *uvd);
-	int (*setVideoMode)(struct uvd *uvd, struct video_window *vw);
-};
-
-struct usbvideo {
-	int num_cameras;		/* As allocated */
-	struct usb_driver usbdrv;	/* Interface to the USB stack */
-	char drvName[80];		/* Driver name */
-	struct mutex lock;		/* Mutex protecting camera structures */
-	struct usbvideo_cb cb;		/* Table of callbacks (virtual methods) */
-	struct video_device vdt;	/* Video device template */
-	struct uvd *cam;			/* Array of camera structures */
-	struct module *md_module;	/* Minidriver module */
-};
-
-
-/*
- * This macro retrieves callback address from the struct uvd object.
- * No validity checks are done here, so be sure to check the
- * callback beforehand with VALID_CALLBACK.
- */
-#define	GET_CALLBACK(uvd,cbName) ((uvd)->handle->cb.cbName)
-
-/*
- * This macro returns either callback pointer or NULL. This is safe
- * macro, meaning that most of components of data structures involved
- * may be NULL - this only results in NULL being returned. You may
- * wish to use this macro to make sure that the callback is callable.
- * However keep in mind that those checks take time.
- */
-#define	VALID_CALLBACK(uvd,cbName) ((((uvd) != NULL) && \
-		((uvd)->handle != NULL)) ? GET_CALLBACK(uvd,cbName) : NULL)
-
-int  RingQueue_Dequeue(struct RingQueue *rq, unsigned char *dst, int len);
-int  RingQueue_Enqueue(struct RingQueue *rq, const unsigned char *cdata, int n);
-void RingQueue_WakeUpInterruptible(struct RingQueue *rq);
-void RingQueue_Flush(struct RingQueue *rq);
-
-static inline int RingQueue_GetLength(const struct RingQueue *rq)
-{
-	return (rq->wi - rq->ri + rq->length) & (rq->length-1);
-}
-
-static inline int RingQueue_GetFreeSpace(const struct RingQueue *rq)
-{
-	return rq->length - RingQueue_GetLength(rq);
-}
-
-void usbvideo_DrawLine(
-	struct usbvideo_frame *frame,
-	int x1, int y1,
-	int x2, int y2,
-	unsigned char cr, unsigned char cg, unsigned char cb);
-void usbvideo_HexDump(const unsigned char *data, int len);
-void usbvideo_SayAndWait(const char *what);
-void usbvideo_TestPattern(struct uvd *uvd, int fullframe, int pmode);
-
-/* Memory allocation routines */
-unsigned long usbvideo_kvirt_to_pa(unsigned long adr);
-
-int usbvideo_register(
-	struct usbvideo **pCams,
-	const int num_cams,
-	const int num_extra,
-	const char *driverName,
-	const struct usbvideo_cb *cbTable,
-	struct module *md,
-	const struct usb_device_id *id_table);
-struct uvd *usbvideo_AllocateDevice(struct usbvideo *cams);
-int usbvideo_RegisterVideoDevice(struct uvd *uvd);
-void usbvideo_Deregister(struct usbvideo **uvt);
-
-int usbvideo_v4l_initialize(struct video_device *dev);
-
-void usbvideo_DeinterlaceFrame(struct uvd *uvd, struct usbvideo_frame *frame);
-
-/*
- * This code performs bounds checking - use it when working with
- * new formats, or else you may get oopses all over the place.
- * If pixel falls out of bounds then it gets shoved back (as close
- * to place of offence as possible) and is painted bright red.
- *
- * There are two important concepts: frame width, height and
- * V4L canvas width, height. The former is the area requested by
- * the application -for this very frame-. The latter is the largest
- * possible frame that we can serve (we advertise that via V4L ioctl).
- * The frame data is expected to be formatted as lines of length
- * VIDEOSIZE_X(fr->request), total VIDEOSIZE_Y(frame->request) lines.
- */
-static inline void RGB24_PUTPIXEL(
-	struct usbvideo_frame *fr,
-	int ix, int iy,
-	unsigned char vr,
-	unsigned char vg,
-	unsigned char vb)
-{
-	register unsigned char *pf;
-	int limiter = 0, mx, my;
-	mx = ix;
-	my = iy;
-	if (mx < 0) {
-		mx=0;
-		limiter++;
-	} else if (mx >= VIDEOSIZE_X((fr)->request)) {
-		mx= VIDEOSIZE_X((fr)->request) - 1;
-		limiter++;
-	}
-	if (my < 0) {
-		my = 0;
-		limiter++;
-	} else if (my >= VIDEOSIZE_Y((fr)->request)) {
-		my = VIDEOSIZE_Y((fr)->request) - 1;
-		limiter++;
-	}
-	pf = (fr)->data + V4L_BYTES_PER_PIXEL*((iy)*VIDEOSIZE_X((fr)->request) + (ix));
-	if (limiter) {
-		*pf++ = 0;
-		*pf++ = 0;
-		*pf++ = 0xFF;
-	} else {
-		*pf++ = (vb);
-		*pf++ = (vg);
-		*pf++ = (vr);
-	}
-}
-
-#endif /* usbvideo_h */
diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c
deleted file mode 100644
index dc17cce..0000000
--- a/drivers/media/video/usbvideo/vicam.c
+++ /dev/null
@@ -1,952 +0,0 @@
-/*
- * USB ViCam WebCam driver
- * Copyright (c) 2002 Joe Burks (jburks@wavicle.org),
- *                    Christopher L Cheney (ccheney@cheney.cx),
- *                    Pavel Machek (pavel@ucw.cz),
- *                    John Tyner (jtyner@cs.ucr.edu),
- *                    Monroe Williams (monroe@pobox.com)
- *
- * Supports 3COM HomeConnect PC Digital WebCam
- * Supports Compro PS39U WebCam
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * This source code is based heavily on the CPiA webcam driver which was
- * written by Peter Pregler, Scott J. Bertin and Johannes Erdfelt
- *
- * Portions of this code were also copied from usbvideo.c
- *
- * Special thanks to the whole team at Sourceforge for help making
- * this driver become a reality.  Notably:
- * Andy Armstrong who reverse engineered the color encoding and
- * Pavel Machek and Chris Cheney who worked on reverse engineering the
- *    camera controls and wrote the first generation driver.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/videodev.h>
-#include <linux/usb.h>
-#include <linux/vmalloc.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <linux/firmware.h>
-#include <linux/ihex.h>
-#include "usbvideo.h"
-
-// #define VICAM_DEBUG
-
-#ifdef VICAM_DEBUG
-#define ADBG(lineno,fmt,args...) printk(fmt, jiffies, __func__, lineno, ##args)
-#define DBG(fmt,args...) ADBG((__LINE__),KERN_DEBUG __FILE__"(%ld):%s (%d):"fmt,##args)
-#else
-#define DBG(fmn,args...) do {} while(0)
-#endif
-
-#define DRIVER_AUTHOR           "Joe Burks, jburks@wavicle.org"
-#define DRIVER_DESC             "ViCam WebCam Driver"
-
-/* Define these values to match your device */
-#define USB_VICAM_VENDOR_ID	0x04c1
-#define USB_VICAM_PRODUCT_ID	0x009d
-#define USB_COMPRO_VENDOR_ID	0x0602
-#define USB_COMPRO_PRODUCT_ID	0x1001
-
-#define VICAM_BYTES_PER_PIXEL   3
-#define VICAM_MAX_READ_SIZE     (512*242+128)
-#define VICAM_MAX_FRAME_SIZE    (VICAM_BYTES_PER_PIXEL*320*240)
-#define VICAM_FRAMES            2
-
-#define VICAM_HEADER_SIZE       64
-
-/* rvmalloc / rvfree copied from usbvideo.c
- *
- * Not sure why these are not yet non-statics which I can reference through
- * usbvideo.h the same as it is in 2.4.20.  I bet this will get fixed sometime
- * in the future.
- *
-*/
-static void *rvmalloc(unsigned long size)
-{
-	void *mem;
-	unsigned long adr;
-
-	size = PAGE_ALIGN(size);
-	mem = vmalloc_32(size);
-	if (!mem)
-		return NULL;
-
-	memset(mem, 0, size); /* Clear the ram out, no junk to the user */
-	adr = (unsigned long) mem;
-	while (size > 0) {
-		SetPageReserved(vmalloc_to_page((void *)adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-
-	return mem;
-}
-
-static void rvfree(void *mem, unsigned long size)
-{
-	unsigned long adr;
-
-	if (!mem)
-		return;
-
-	adr = (unsigned long) mem;
-	while ((long) size > 0) {
-		ClearPageReserved(vmalloc_to_page((void *)adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-	vfree(mem);
-}
-
-struct vicam_camera {
-	u16 shutter_speed;	// capture shutter speed
-	u16 gain;		// capture gain
-
-	u8 *raw_image;		// raw data captured from the camera
-	u8 *framebuf;		// processed data in RGB24 format
-	u8 *cntrlbuf;		// area used to send control msgs
-
-	struct video_device vdev;	// v4l video device
-	struct usb_device *udev;	// usb device
-
-	/* guard against simultaneous accesses to the camera */
-	struct mutex cam_lock;
-
-	int is_initialized;
-	u8 open_count;
-	u8 bulkEndpoint;
-	int needsDummyRead;
-};
-
-static int vicam_probe( struct usb_interface *intf, const struct usb_device_id *id);
-static void vicam_disconnect(struct usb_interface *intf);
-static void read_frame(struct vicam_camera *cam, int framenum);
-static void vicam_decode_color(const u8 *, u8 *);
-
-static int __send_control_msg(struct vicam_camera *cam,
-			      u8 request,
-			      u16 value,
-			      u16 index,
-			      unsigned char *cp,
-			      u16 size)
-{
-	int status;
-
-	/* cp must be memory that has been allocated by kmalloc */
-
-	status = usb_control_msg(cam->udev,
-				 usb_sndctrlpipe(cam->udev, 0),
-				 request,
-				 USB_DIR_OUT | USB_TYPE_VENDOR |
-				 USB_RECIP_DEVICE, value, index,
-				 cp, size, 1000);
-
-	status = min(status, 0);
-
-	if (status < 0) {
-		printk(KERN_INFO "Failed sending control message, error %d.\n",
-		       status);
-	}
-
-	return status;
-}
-
-static int send_control_msg(struct vicam_camera *cam,
-			    u8 request,
-			    u16 value,
-			    u16 index,
-			    unsigned char *cp,
-			    u16 size)
-{
-	int status = -ENODEV;
-	mutex_lock(&cam->cam_lock);
-	if (cam->udev) {
-		status = __send_control_msg(cam, request, value,
-					    index, cp, size);
-	}
-	mutex_unlock(&cam->cam_lock);
-	return status;
-}
-static int
-initialize_camera(struct vicam_camera *cam)
-{
-	int err;
-	const struct ihex_binrec *rec;
-	const struct firmware *uninitialized_var(fw);
-
-	err = request_ihex_firmware(&fw, "vicam/firmware.fw", &cam->udev->dev);
-	if (err) {
-		printk(KERN_ERR "Failed to load \"vicam/firmware.fw\": %d\n",
-		       err);
-		return err;
-	}
-
-	for (rec = (void *)fw->data; rec; rec = ihex_next_binrec(rec)) {
-		memcpy(cam->cntrlbuf, rec->data, be16_to_cpu(rec->len));
-
-		err = send_control_msg(cam, 0xff, 0, 0,
-				       cam->cntrlbuf, be16_to_cpu(rec->len));
-		if (err)
-			break;
-	}
-
-	release_firmware(fw);
-
-	return err;
-}
-
-static int
-set_camera_power(struct vicam_camera *cam, int state)
-{
-	int status;
-
-	if ((status = send_control_msg(cam, 0x50, state, 0, NULL, 0)) < 0)
-		return status;
-
-	if (state) {
-		send_control_msg(cam, 0x55, 1, 0, NULL, 0);
-	}
-
-	return 0;
-}
-
-static long
-vicam_ioctl(struct file *file, unsigned int ioctlnr, unsigned long arg)
-{
-	void __user *user_arg = (void __user *)arg;
-	struct vicam_camera *cam = file->private_data;
-	long retval = 0;
-
-	if (!cam)
-		return -ENODEV;
-
-	switch (ioctlnr) {
-		/* query capabilities */
-	case VIDIOCGCAP:
-		{
-			struct video_capability b;
-
-			DBG("VIDIOCGCAP\n");
-			memset(&b, 0, sizeof(b));
-			strcpy(b.name, "ViCam-based Camera");
-			b.type = VID_TYPE_CAPTURE;
-			b.channels = 1;
-			b.audios = 0;
-			b.maxwidth = 320;	/* VIDEOSIZE_CIF */
-			b.maxheight = 240;
-			b.minwidth = 320;	/* VIDEOSIZE_48_48 */
-			b.minheight = 240;
-
-			if (copy_to_user(user_arg, &b, sizeof(b)))
-				retval = -EFAULT;
-
-			break;
-		}
-		/* get/set video source - we are a camera and nothing else */
-	case VIDIOCGCHAN:
-		{
-			struct video_channel v;
-
-			DBG("VIDIOCGCHAN\n");
-			if (copy_from_user(&v, user_arg, sizeof(v))) {
-				retval = -EFAULT;
-				break;
-			}
-			if (v.channel != 0) {
-				retval = -EINVAL;
-				break;
-			}
-
-			v.channel = 0;
-			strcpy(v.name, "Camera");
-			v.tuners = 0;
-			v.flags = 0;
-			v.type = VIDEO_TYPE_CAMERA;
-			v.norm = 0;
-
-			if (copy_to_user(user_arg, &v, sizeof(v)))
-				retval = -EFAULT;
-			break;
-		}
-
-	case VIDIOCSCHAN:
-		{
-			int v;
-
-			if (copy_from_user(&v, user_arg, sizeof(v)))
-				retval = -EFAULT;
-			DBG("VIDIOCSCHAN %d\n", v);
-
-			if (retval == 0 && v != 0)
-				retval = -EINVAL;
-
-			break;
-		}
-
-		/* image properties */
-	case VIDIOCGPICT:
-		{
-			struct video_picture vp;
-			DBG("VIDIOCGPICT\n");
-			memset(&vp, 0, sizeof (struct video_picture));
-			vp.brightness = cam->gain << 8;
-			vp.depth = 24;
-			vp.palette = VIDEO_PALETTE_RGB24;
-			if (copy_to_user(user_arg, &vp, sizeof (struct video_picture)))
-				retval = -EFAULT;
-			break;
-		}
-
-	case VIDIOCSPICT:
-		{
-			struct video_picture vp;
-
-			if (copy_from_user(&vp, user_arg, sizeof(vp))) {
-				retval = -EFAULT;
-				break;
-			}
-
-			DBG("VIDIOCSPICT depth = %d, pal = %d\n", vp.depth,
-			    vp.palette);
-
-			cam->gain = vp.brightness >> 8;
-
-			if (vp.depth != 24
-			    || vp.palette != VIDEO_PALETTE_RGB24)
-				retval = -EINVAL;
-
-			break;
-		}
-
-		/* get/set capture window */
-	case VIDIOCGWIN:
-		{
-			struct video_window vw;
-			vw.x = 0;
-			vw.y = 0;
-			vw.width = 320;
-			vw.height = 240;
-			vw.chromakey = 0;
-			vw.flags = 0;
-			vw.clips = NULL;
-			vw.clipcount = 0;
-
-			DBG("VIDIOCGWIN\n");
-
-			if (copy_to_user(user_arg, (void *)&vw, sizeof(vw)))
-				retval = -EFAULT;
-
-			// I'm not sure what the deal with a capture window is, it is very poorly described
-			// in the doc.  So I won't support it now.
-			break;
-		}
-
-	case VIDIOCSWIN:
-		{
-
-			struct video_window vw;
-
-			if (copy_from_user(&vw, user_arg, sizeof(vw))) {
-				retval = -EFAULT;
-				break;
-			}
-
-			DBG("VIDIOCSWIN %d x %d\n", vw.width, vw.height);
-
-			if ( vw.width != 320 || vw.height != 240 )
-				retval = -EFAULT;
-
-			break;
-		}
-
-		/* mmap interface */
-	case VIDIOCGMBUF:
-		{
-			struct video_mbuf vm;
-			int i;
-
-			DBG("VIDIOCGMBUF\n");
-			memset(&vm, 0, sizeof (vm));
-			vm.size =
-			    VICAM_MAX_FRAME_SIZE * VICAM_FRAMES;
-			vm.frames = VICAM_FRAMES;
-			for (i = 0; i < VICAM_FRAMES; i++)
-				vm.offsets[i] = VICAM_MAX_FRAME_SIZE * i;
-
-			if (copy_to_user(user_arg, (void *)&vm, sizeof(vm)))
-				retval = -EFAULT;
-
-			break;
-		}
-
-	case VIDIOCMCAPTURE:
-		{
-			struct video_mmap vm;
-			// int video_size;
-
-			if (copy_from_user((void *)&vm, user_arg, sizeof(vm))) {
-				retval = -EFAULT;
-				break;
-			}
-
-			DBG("VIDIOCMCAPTURE frame=%d, height=%d, width=%d, format=%d.\n",vm.frame,vm.width,vm.height,vm.format);
-
-			if ( vm.frame >= VICAM_FRAMES || vm.format != VIDEO_PALETTE_RGB24 )
-				retval = -EINVAL;
-
-			// in theory right here we'd start the image capturing
-			// (fill in a bulk urb and submit it asynchronously)
-			//
-			// Instead we're going to do a total hack job for now and
-			// retrieve the frame in VIDIOCSYNC
-
-			break;
-		}
-
-	case VIDIOCSYNC:
-		{
-			int frame;
-
-			if (copy_from_user((void *)&frame, user_arg, sizeof(int))) {
-				retval = -EFAULT;
-				break;
-			}
-			DBG("VIDIOCSYNC: %d\n", frame);
-
-			read_frame(cam, frame);
-			vicam_decode_color(cam->raw_image,
-					   cam->framebuf +
-					   frame * VICAM_MAX_FRAME_SIZE );
-
-			break;
-		}
-
-		/* pointless to implement overlay with this camera */
-	case VIDIOCCAPTURE:
-	case VIDIOCGFBUF:
-	case VIDIOCSFBUF:
-	case VIDIOCKEY:
-		retval = -EINVAL;
-		break;
-
-		/* tuner interface - we have none */
-	case VIDIOCGTUNER:
-	case VIDIOCSTUNER:
-	case VIDIOCGFREQ:
-	case VIDIOCSFREQ:
-		retval = -EINVAL;
-		break;
-
-		/* audio interface - we have none */
-	case VIDIOCGAUDIO:
-	case VIDIOCSAUDIO:
-		retval = -EINVAL;
-		break;
-	default:
-		retval = -ENOIOCTLCMD;
-		break;
-	}
-
-	return retval;
-}
-
-static int
-vicam_open(struct file *file)
-{
-	struct vicam_camera *cam = video_drvdata(file);
-
-	DBG("open\n");
-
-	if (!cam) {
-		printk(KERN_ERR
-		       "vicam video_device improperly initialized");
-		return -EINVAL;
-	}
-
-	/* cam_lock/open_count protects us from simultaneous opens
-	 * ... for now. we probably shouldn't rely on this fact forever.
-	 */
-
-	mutex_lock(&cam->cam_lock);
-	if (cam->open_count > 0) {
-		printk(KERN_INFO
-		       "vicam_open called on already opened camera");
-		mutex_unlock(&cam->cam_lock);
-		return -EBUSY;
-	}
-
-	cam->raw_image = kmalloc(VICAM_MAX_READ_SIZE, GFP_KERNEL);
-	if (!cam->raw_image) {
-		mutex_unlock(&cam->cam_lock);
-		return -ENOMEM;
-	}
-
-	cam->framebuf = rvmalloc(VICAM_MAX_FRAME_SIZE * VICAM_FRAMES);
-	if (!cam->framebuf) {
-		kfree(cam->raw_image);
-		mutex_unlock(&cam->cam_lock);
-		return -ENOMEM;
-	}
-
-	cam->cntrlbuf = kmalloc(PAGE_SIZE, GFP_KERNEL);
-	if (!cam->cntrlbuf) {
-		kfree(cam->raw_image);
-		rvfree(cam->framebuf, VICAM_MAX_FRAME_SIZE * VICAM_FRAMES);
-		mutex_unlock(&cam->cam_lock);
-		return -ENOMEM;
-	}
-
-	cam->needsDummyRead = 1;
-	cam->open_count++;
-
-	file->private_data = cam;
-	mutex_unlock(&cam->cam_lock);
-
-
-	// First upload firmware, then turn the camera on
-
-	if (!cam->is_initialized) {
-		initialize_camera(cam);
-
-		cam->is_initialized = 1;
-	}
-
-	set_camera_power(cam, 1);
-
-	return 0;
-}
-
-static int
-vicam_close(struct file *file)
-{
-	struct vicam_camera *cam = file->private_data;
-	int open_count;
-	struct usb_device *udev;
-
-	DBG("close\n");
-
-	/* it's not the end of the world if
-	 * we fail to turn the camera off.
-	 */
-
-	set_camera_power(cam, 0);
-
-	kfree(cam->raw_image);
-	rvfree(cam->framebuf, VICAM_MAX_FRAME_SIZE * VICAM_FRAMES);
-	kfree(cam->cntrlbuf);
-
-	mutex_lock(&cam->cam_lock);
-
-	cam->open_count--;
-	open_count = cam->open_count;
-	udev = cam->udev;
-
-	mutex_unlock(&cam->cam_lock);
-
-	if (!open_count && !udev) {
-		kfree(cam);
-	}
-
-	return 0;
-}
-
-static void vicam_decode_color(const u8 *data, u8 *rgb)
-{
-	/* vicam_decode_color - Convert from Vicam Y-Cr-Cb to RGB
-	 * Copyright (C) 2002 Monroe Williams (monroe@pobox.com)
-	 */
-
-	int i, prevY, nextY;
-
-	prevY = 512;
-	nextY = 512;
-
-	data += VICAM_HEADER_SIZE;
-
-	for( i = 0; i < 240; i++, data += 512 ) {
-		const int y = ( i * 242 ) / 240;
-
-		int j, prevX, nextX;
-		int Y, Cr, Cb;
-
-		if ( y == 242 - 1 ) {
-			nextY = -512;
-		}
-
-		prevX = 1;
-		nextX = 1;
-
-		for ( j = 0; j < 320; j++, rgb += 3 ) {
-			const int x = ( j * 512 ) / 320;
-			const u8 * const src = &data[x];
-
-			if ( x == 512 - 1 ) {
-				nextX = -1;
-			}
-
-			Cr = ( src[prevX] - src[0] ) +
-				( src[nextX] - src[0] );
-			Cr /= 2;
-
-			Cb = ( src[prevY] - src[prevX + prevY] ) +
-				( src[prevY] - src[nextX + prevY] ) +
-				( src[nextY] - src[prevX + nextY] ) +
-				( src[nextY] - src[nextX + nextY] );
-			Cb /= 4;
-
-			Y = 1160 * ( src[0] + ( Cr / 2 ) - 16 );
-
-			if ( i & 1 ) {
-				int Ct = Cr;
-				Cr = Cb;
-				Cb = Ct;
-			}
-
-			if ( ( x ^ i ) & 1 ) {
-				Cr = -Cr;
-				Cb = -Cb;
-			}
-
-			rgb[0] = clamp( ( ( Y + ( 2017 * Cb ) ) +
-					500 ) / 900, 0, 255 );
-			rgb[1] = clamp( ( ( Y - ( 392 * Cb ) -
-					  ( 813 * Cr ) ) +
-					  500 ) / 1000, 0, 255 );
-			rgb[2] = clamp( ( ( Y + ( 1594 * Cr ) ) +
-					500 ) / 1300, 0, 255 );
-
-			prevX = -1;
-		}
-
-		prevY = -512;
-	}
-}
-
-static void
-read_frame(struct vicam_camera *cam, int framenum)
-{
-	unsigned char *request = cam->cntrlbuf;
-	int realShutter;
-	int n;
-	int actual_length;
-
-	if (cam->needsDummyRead) {
-		cam->needsDummyRead = 0;
-		read_frame(cam, framenum);
-	}
-
-	memset(request, 0, 16);
-	request[0] = cam->gain;	// 0 = 0% gain, FF = 100% gain
-
-	request[1] = 0;	// 512x242 capture
-
-	request[2] = 0x90;	// the function of these two bytes
-	request[3] = 0x07;	// is not yet understood
-
-	if (cam->shutter_speed > 60) {
-		// Short exposure
-		realShutter =
-		    ((-15631900 / cam->shutter_speed) + 260533) / 1000;
-		request[4] = realShutter & 0xFF;
-		request[5] = (realShutter >> 8) & 0xFF;
-		request[6] = 0x03;
-		request[7] = 0x01;
-	} else {
-		// Long exposure
-		realShutter = 15600 / cam->shutter_speed - 1;
-		request[4] = 0;
-		request[5] = 0;
-		request[6] = realShutter & 0xFF;
-		request[7] = realShutter >> 8;
-	}
-
-	// Per John Markus Bjørndalen, byte at index 8 causes problems if it isn't 0
-	request[8] = 0;
-	// bytes 9-15 do not seem to affect exposure or image quality
-
-	mutex_lock(&cam->cam_lock);
-
-	if (!cam->udev) {
-		goto done;
-	}
-
-	n = __send_control_msg(cam, 0x51, 0x80, 0, request, 16);
-
-	if (n < 0) {
-		printk(KERN_ERR
-		       " Problem sending frame capture control message");
-		goto done;
-	}
-
-	n = usb_bulk_msg(cam->udev,
-			 usb_rcvbulkpipe(cam->udev, cam->bulkEndpoint),
-			 cam->raw_image,
-			 512 * 242 + 128, &actual_length, 10000);
-
-	if (n < 0) {
-		printk(KERN_ERR "Problem during bulk read of frame data: %d\n",
-		       n);
-	}
-
- done:
-	mutex_unlock(&cam->cam_lock);
-}
-
-static ssize_t
-vicam_read( struct file *file, char __user *buf, size_t count, loff_t *ppos )
-{
-	struct vicam_camera *cam = file->private_data;
-
-	DBG("read %d bytes.\n", (int) count);
-
-	if (*ppos >= VICAM_MAX_FRAME_SIZE) {
-		*ppos = 0;
-		return 0;
-	}
-
-	if (*ppos == 0) {
-		read_frame(cam, 0);
-		vicam_decode_color(cam->raw_image,
-				   cam->framebuf +
-				   0 * VICAM_MAX_FRAME_SIZE);
-	}
-
-	count = min_t(size_t, count, VICAM_MAX_FRAME_SIZE - *ppos);
-
-	if (copy_to_user(buf, &cam->framebuf[*ppos], count)) {
-		count = -EFAULT;
-	} else {
-		*ppos += count;
-	}
-
-	if (count == VICAM_MAX_FRAME_SIZE) {
-		*ppos = 0;
-	}
-
-	return count;
-}
-
-
-static int
-vicam_mmap(struct file *file, struct vm_area_struct *vma)
-{
-	// TODO: allocate the raw frame buffer if necessary
-	unsigned long page, pos;
-	unsigned long start = vma->vm_start;
-	unsigned long size  = vma->vm_end-vma->vm_start;
-	struct vicam_camera *cam = file->private_data;
-
-	if (!cam)
-		return -ENODEV;
-
-	DBG("vicam_mmap: %ld\n", size);
-
-	/* We let mmap allocate as much as it wants because Linux was adding 2048 bytes
-	 * to the size the application requested for mmap and it was screwing apps up.
-	 if (size > VICAM_FRAMES*VICAM_MAX_FRAME_SIZE)
-	 return -EINVAL;
-	 */
-
-	pos = (unsigned long)cam->framebuf;
-	while (size > 0) {
-		page = vmalloc_to_pfn((void *)pos);
-		if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
-			return -EAGAIN;
-
-		start += PAGE_SIZE;
-		pos += PAGE_SIZE;
-		if (size > PAGE_SIZE)
-			size -= PAGE_SIZE;
-		else
-			size = 0;
-	}
-
-	return 0;
-}
-
-static const struct v4l2_file_operations vicam_fops = {
-	.owner		= THIS_MODULE,
-	.open		= vicam_open,
-	.release	= vicam_close,
-	.read		= vicam_read,
-	.mmap		= vicam_mmap,
-	.ioctl		= vicam_ioctl,
-};
-
-static struct video_device vicam_template = {
-	.name 		= "ViCam-based USB Camera",
-	.fops 		= &vicam_fops,
-	.release 	= video_device_release_empty,
-};
-
-/* table of devices that work with this driver */
-static struct usb_device_id vicam_table[] = {
-	{USB_DEVICE(USB_VICAM_VENDOR_ID, USB_VICAM_PRODUCT_ID)},
-	{USB_DEVICE(USB_COMPRO_VENDOR_ID, USB_COMPRO_PRODUCT_ID)},
-	{}			/* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, vicam_table);
-
-static struct usb_driver vicam_driver = {
-	.name		= "vicam",
-	.probe		= vicam_probe,
-	.disconnect	= vicam_disconnect,
-	.id_table	= vicam_table
-};
-
-/**
- *	vicam_probe
- *	@intf: the interface
- *	@id: the device id
- *
- *	Called by the usb core when a new device is connected that it thinks
- *	this driver might be interested in.
- */
-static int
-vicam_probe( struct usb_interface *intf, const struct usb_device_id *id)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	int bulkEndpoint = 0;
-	const struct usb_host_interface *interface;
-	const struct usb_endpoint_descriptor *endpoint;
-	struct vicam_camera *cam;
-
-	printk(KERN_INFO "ViCam based webcam connected\n");
-
-	interface = intf->cur_altsetting;
-
-	DBG(KERN_DEBUG "Interface %d. has %u. endpoints!\n",
-	       interface->desc.bInterfaceNumber, (unsigned) (interface->desc.bNumEndpoints));
-	endpoint = &interface->endpoint[0].desc;
-
-	if (usb_endpoint_is_bulk_in(endpoint)) {
-		/* we found a bulk in endpoint */
-		bulkEndpoint = endpoint->bEndpointAddress;
-	} else {
-		printk(KERN_ERR
-		       "No bulk in endpoint was found ?! (this is bad)\n");
-	}
-
-	if ((cam =
-	     kzalloc(sizeof (struct vicam_camera), GFP_KERNEL)) == NULL) {
-		printk(KERN_WARNING
-		       "could not allocate kernel memory for vicam_camera struct\n");
-		return -ENOMEM;
-	}
-
-
-	cam->shutter_speed = 15;
-
-	mutex_init(&cam->cam_lock);
-
-	memcpy(&cam->vdev, &vicam_template, sizeof(vicam_template));
-	video_set_drvdata(&cam->vdev, cam);
-
-	cam->udev = dev;
-	cam->bulkEndpoint = bulkEndpoint;
-
-	if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1) < 0) {
-		kfree(cam);
-		printk(KERN_WARNING "video_register_device failed\n");
-		return -EIO;
-	}
-
-	printk(KERN_INFO "ViCam webcam driver now controlling device %s\n",
-		video_device_node_name(&cam->vdev));
-
-	usb_set_intfdata (intf, cam);
-
-	return 0;
-}
-
-static void
-vicam_disconnect(struct usb_interface *intf)
-{
-	int open_count;
-	struct vicam_camera *cam = usb_get_intfdata (intf);
-	usb_set_intfdata (intf, NULL);
-
-	/* we must unregister the device before taking its
-	 * cam_lock. This is because the video open call
-	 * holds the same lock as video unregister. if we
-	 * unregister inside of the cam_lock and open also
-	 * uses the cam_lock, we get deadlock.
-	 */
-
-	video_unregister_device(&cam->vdev);
-
-	/* stop the camera from being used */
-
-	mutex_lock(&cam->cam_lock);
-
-	/* mark the camera as gone */
-
-	cam->udev = NULL;
-
-	/* the only thing left to do is synchronize with
-	 * our close/release function on who should release
-	 * the camera memory. if there are any users using the
-	 * camera, it's their job. if there are no users,
-	 * it's ours.
-	 */
-
-	open_count = cam->open_count;
-
-	mutex_unlock(&cam->cam_lock);
-
-	if (!open_count) {
-		kfree(cam);
-	}
-
-	printk(KERN_DEBUG "ViCam-based WebCam disconnected\n");
-}
-
-/*
- */
-static int __init
-usb_vicam_init(void)
-{
-	int retval;
-	DBG(KERN_INFO "ViCam-based WebCam driver startup\n");
-	retval = usb_register(&vicam_driver);
-	if (retval)
-		printk(KERN_WARNING "usb_register failed!\n");
-	return retval;
-}
-
-static void __exit
-usb_vicam_exit(void)
-{
-	DBG(KERN_INFO
-	       "ViCam-based WebCam driver shutdown\n");
-
-	usb_deregister(&vicam_driver);
-}
-
-module_init(usb_vicam_init);
-module_exit(usb_vicam_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-MODULE_FIRMWARE("vicam/firmware.fw");