diff options
| author | Mauro Carvalho Chehab <m.chehab@samsung.com> | 2013-12-28 10:42:47 (GMT) |
|---|---|---|
| committer | Mauro Carvalho Chehab <m.chehab@samsung.com> | 2014-01-10 08:10:07 (GMT) |
| commit | d20e4ed6d30c6ecee315eea0efb3449c3591d09e (patch) | |
| tree | 618cb9da20c3ed822495338301b3eb77bc47efdc /drivers/media | |
| parent | d1b7213b480a42c9bc78938a1b3f4bc14089467f (diff) | |
| download | linux-d20e4ed6d30c6ecee315eea0efb3449c3591d09e.tar.xz | |
[media] em28xx: use a better value for I2C timeouts
In the lack of a better spec, let's assume the timeout
values compatible with SMBus spec:
http://smbus.org/specs/smbus110.pdf
at chapter 8 - Electrical Characteristics of SMBus devices
Ok, SMBus is a subset of I2C, and not all devices will be
following it, but the timeout value before this patch was not
even following the spec.
So, while we don't have a better guess for it, use 35 + 1
ms as the timeout.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Diffstat (limited to 'drivers/media')
| -rw-r--r-- | drivers/media/usb/em28xx/em28xx.h | 17 |
1 files changed, 15 insertions, 2 deletions
diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h index b0aa849..efdf386 100644 --- a/drivers/media/usb/em28xx/em28xx.h +++ b/drivers/media/usb/em28xx/em28xx.h @@ -183,8 +183,21 @@ #define EM28XX_INTERLACED_DEFAULT 1 -/* time in msecs to wait for i2c writes to finish */ -#define EM2800_I2C_XFER_TIMEOUT 20 +/* + * Time in msecs to wait for i2c xfers to finish. + * 35ms is the maximum time a SMBUS device could wait when + * clock stretching is used. As the transfer itself will take + * some time to happen, set it to 35 ms. + * + * Ok, I2C doesn't specify any limit. So, eventually, we may need + * to increase this timeout. + * + * FIXME: this assumes that an I2C message is not longer than 1ms. + * This is actually dependent on the I2C bus speed, although most + * devices use a 100kHz clock. So, this assumtion is true most of + * the time. + */ +#define EM28XX_I2C_XFER_TIMEOUT 36 /* time in msecs to wait for AC97 xfers to finish */ #define EM28XX_AC97_XFER_TIMEOUT 100 |