i2o: move to staging

The I2O layer deals with a technology that to say the least didn't catch on
in the market.

The only relevant products are some of the AMI MegaRAID - which supported I2O
and its native mode (The native mode is faster and runs on Linux), an
obscure crypto ethernet card that's now so many years out of date nobody
would use it, the old DPT controllers, which speak their own dialect and
have their own driver - and ermm.. thats about it.

We also know the code isn't in good shape as recently a patch was proposed
and queried as buggy, which in turn showed the existing code was broken
already by prior "clean up" and nobody had noticed that either.

It's coding style robot code nothing more. Like some forgotten corridor
cleaned relentlessly by a lost Roomba but where no user has trodden in years.

Move it to staging and then to /dev/null.

The headers remain as they are shared with dpt_i2o.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 0 insertions, 121 deletions

diff --git a/drivers/message/i2o/Kconfig b/drivers/message/i2o/Kconfig
deleted file mode 100644
index 5afa0e3..0000000
--- a/drivers/message/i2o/Kconfig
+++ /dev/null
@@ -1,121 +0,0 @@
-
-menuconfig I2O
-	tristate "I2O device support"
-	depends on PCI
-	---help---
-	  The Intelligent Input/Output (I2O) architecture allows hardware
-	  drivers to be split into two parts: an operating system specific
-	  module called the OSM and an hardware specific module called the
-	  HDM. The OSM can talk to a whole range of HDM's, and ideally the
-	  HDM's are not OS dependent. This allows for the same HDM driver to
-	  be used under different operating systems if the relevant OSM is in
-	  place. In order for this to work, you need to have an I2O interface
-	  adapter card in your computer. This card contains a special I/O
-	  processor (IOP), thus allowing high speeds since the CPU does not
-	  have to deal with I/O.
-
-	  If you say Y here, you will get a choice of interface adapter
-	  drivers and OSM's with the following questions.
-
-	  To compile this support as a module, choose M here: the
-	  modules will be called i2o_core.
-
-	  If unsure, say N.
-
-if I2O
-
-config I2O_LCT_NOTIFY_ON_CHANGES
-	bool "Enable LCT notification"
-	default y
-	---help---
-	  Only say N here if you have a I2O controller from SUN. The SUN
-	  firmware doesn't support LCT notification on changes. If this option
-	  is enabled on such a controller the driver will hang up in a endless
-	  loop. On all other controllers say Y.
-
-	  If unsure, say Y.
-
-config I2O_EXT_ADAPTEC
-	bool "Enable Adaptec extensions"
-	default y
-	---help---
-	  Say Y for support of raidutils for Adaptec I2O controllers. You also
-	  have to say Y to "I2O Configuration support", "I2O SCSI OSM" below
-	  and to "SCSI generic support" under "SCSI device configuration".
-
-config I2O_EXT_ADAPTEC_DMA64
-	bool "Enable 64-bit DMA"
-	depends on I2O_EXT_ADAPTEC && ( 64BIT || HIGHMEM64G )
-	default y
-	---help---
-	  Say Y for support of 64-bit DMA transfer mode on Adaptec I2O
-	  controllers.
-	  Note: You need at least firmware version 3709.
-
-config I2O_CONFIG
-	tristate "I2O Configuration support"
-	depends on VIRT_TO_BUS
-	---help---
-	  Say Y for support of the configuration interface for the I2O adapters.
-	  If you have a RAID controller from Adaptec and you want to use the
-	  raidutils to manage your RAID array, you have to say Y here.
-
-	  To compile this support as a module, choose M here: the
-	  module will be called i2o_config.
-
-	  Note: If you want to use the new API you have to download the
-	  i2o_config patch from http://i2o.shadowconnect.com/
-
-config I2O_CONFIG_OLD_IOCTL
-	bool "Enable ioctls (OBSOLETE)"
-	depends on I2O_CONFIG
-	default y
-	---help---
-	  Enables old ioctls.
-
-config I2O_BUS
-	tristate "I2O Bus Adapter OSM"
-	---help---
-	  Include support for the I2O Bus Adapter OSM. The Bus Adapter OSM
-	  provides access to the busses on the I2O controller. The main purpose
-	  is to rescan the bus to find new devices.
-
-	  To compile this support as a module, choose M here: the
-	  module will be called i2o_bus.
-
-config I2O_BLOCK
-	tristate "I2O Block OSM"
-	depends on BLOCK
-	---help---
-	  Include support for the I2O Block OSM. The Block OSM presents disk
-	  and other structured block devices to the operating system. If you
-	  are using an RAID controller, you could access the array only by
-	  the Block OSM driver. But it is possible to access the single disks
-	  by the SCSI OSM driver, for example to monitor the disks.
-
-	  To compile this support as a module, choose M here: the
-	  module will be called i2o_block.
-
-config I2O_SCSI
-	tristate "I2O SCSI OSM"
-	depends on SCSI
-	---help---
-	  Allows direct SCSI access to SCSI devices on a SCSI or FibreChannel
-	  I2O controller. You can use both the SCSI and Block OSM together if
-	  you wish. To access a RAID array, you must use the Block OSM driver.
-	  But you could use the SCSI OSM driver to monitor the single disks.
-
-	  To compile this support as a module, choose M here: the
-	  module will be called i2o_scsi.
-
-config I2O_PROC
-	tristate "I2O /proc support"
-	---help---
-	  If you say Y here and to "/proc file system support", you will be
-	  able to read I2O related information from the virtual directory
-	  /proc/i2o.
-
-	  To compile this support as a module, choose M here: the
-	  module will be called i2o_proc.
-
-endif # I2O