[PATCH] I2O: new sysfs attributes and Adaptec specific block device access and 64-bit DMA support

Changes:
 - Added Bus-OSM which could be used by user space programs to reset a
   channel on the controller
 - Make ioctl's in Config-OSM obsolete in prefer for sysfs attributes and
   move those to its own file
 - Added sysfs attribute for firmware read and write access for I2O
   controllers
 - Added special handling of firmware read and write access for Adaptec
   controllers
 - Added vendor id and product id as sysfs-attribute to Executive classes
 - Added automatic notification of LCT change handling to Exec-OSM
 - Added flushing function to Block-OSM for later barrier implementation
 - Use PRIVATE messages for Block access on Adaptec controllers, which are
   faster then BLOCK class access
 - Cleaned up support for Promise controller
 - New messages are now detected using the IRQ status register as
   suggested by the I2O spec
 - Added i2o_dma_high() and i2o_dma_low() functions
 - Added facility for SG tablesize calculation when using 32-bit and
   64-bit DMA addresses
 - Added i2o_dma_map_single() and i2o_dma_map_sg() which could build the
   SG list for 32-bit as well as 64-bit DMA addresses

Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 files changed, 1176 insertions, 475 deletions

diff --git a/drivers/message/i2o/Kconfig b/drivers/message/i2o/Kconfig
index 8d132b0..ce278e0 100644
--- a/drivers/message/i2o/Kconfig
+++ b/drivers/message/i2o/Kconfig
@@ -35,6 +35,24 @@ config I2O_CONFIG
 	  To compile this support as a module, choose M here: the
 	  module will be called i2o_config.
 
+config I2O_CONFIG_OLD_IOCTL
+	bool "Enable ioctls (OBSOLETE)"
+	depends on I2O_CONFIG
+	default y
+	---help---
+	  Enables old ioctls.
+
+config I2O_BUS
+	tristate "I2O Bus Adapter OSM"
+	depends on I2O
+	---help---
+	  Include support for the I2O Bus Adapter OSM. The Bus Adapter OSM
+	  provides access to the busses on the I2O controller. The main purpose
+	  is to rescan the bus to find new devices.
+
+	  To compile this support as a module, choose M here: the
+	  module will be called i2o_bus.
+
 config I2O_BLOCK
 	tristate "I2O Block OSM"
 	depends on I2O
diff --git a/drivers/message/i2o/Makefile b/drivers/message/i2o/Makefile
index aabc6cd..2c2e39a 100644
--- a/drivers/message/i2o/Makefile
+++ b/drivers/message/i2o/Makefile
@@ -6,8 +6,11 @@
 #
 
 i2o_core-y		+= iop.o driver.o device.o debug.o pci.o exec-osm.o
+i2o_bus-y		+= bus-osm.o
+i2o_config-y		+= config-osm.o
 obj-$(CONFIG_I2O)	+= i2o_core.o
 obj-$(CONFIG_I2O_CONFIG)+= i2o_config.o
+obj-$(CONFIG_I2O_BUS)	+= i2o_bus.o
 obj-$(CONFIG_I2O_BLOCK)	+= i2o_block.o
 obj-$(CONFIG_I2O_SCSI)	+= i2o_scsi.o
 obj-$(CONFIG_I2O_PROC)	+= i2o_proc.o
diff --git a/drivers/message/i2o/bus-osm.c b/drivers/message/i2o/bus-osm.c
new file mode 100644
index 0000000..d43c358
--- /dev/null
+++ b/drivers/message/i2o/bus-osm.c
@@ -0,0 +1,164 @@
+/*
+ *	Bus Adapter OSM
+ *
+ *	Copyright (C) 2005	Markus Lidel <Markus.Lidel@shadowconnect.com>
+ *
+ *	This program is free software; you can redistribute it and/or modify it
+ *	under the terms of the GNU General Public License as published by the
+ *	Free Software Foundation; either version 2 of the License, or (at your
+ *	option) any later version.
+ *
+ *	Fixes/additions:
+ *		Markus Lidel <Markus.Lidel@shadowconnect.com>
+ *			initial version.
+ */
+
+#include <linux/module.h>
+#include <linux/i2o.h>
+
+#define OSM_NAME	"bus-osm"
+#define OSM_VERSION	"$Rev$"
+#define OSM_DESCRIPTION	"I2O Bus Adapter OSM"
+
+static struct i2o_driver i2o_bus_driver;
+
+/* Bus OSM class handling definition */
+static struct i2o_class_id i2o_bus_class_id[] = {
+	{I2O_CLASS_BUS_ADAPTER},
+	{I2O_CLASS_END}
+};
+
+/**
+ *	i2o_bus_scan - Scan the bus for new devices
+ *	@dev: I2O device of the bus, which should be scanned
+ *
+ *	Scans the bus dev for new / removed devices. After the scan a new LCT
+ *	will be fetched automatically.
+ *
+ *	Returns 0 on success or negative error code on failure.
+ */
+static int i2o_bus_scan(struct i2o_device *dev)
+{
+	struct i2o_message __iomem *msg;
+	u32 m;
+
+	m = i2o_msg_get_wait(dev->iop, &msg, I2O_TIMEOUT_MESSAGE_GET);
+	if (m == I2O_QUEUE_EMPTY)
+		return -ETIMEDOUT;
+
+	writel(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]);
+	writel(I2O_CMD_BUS_SCAN << 24 | HOST_TID << 12 | dev->lct_data.tid,
+	       &msg->u.head[1]);
+
+	return i2o_msg_post_wait(dev->iop, m, 60);
+};
+
+/**
+ *	i2o_bus_store_scan - Scan the I2O Bus Adapter
+ *	@d: device which should be scanned
+ *
+ *	Returns count.
+ */
+static ssize_t i2o_bus_store_scan(struct device *d, const char *buf,
+				  size_t count)
+{
+	struct i2o_device *i2o_dev = to_i2o_device(d);
+	int rc;
+
+	if ((rc = i2o_bus_scan(i2o_dev)))
+		osm_warn("bus scan failed %d\n", rc);
+
+	return count;
+}
+
+/* Bus Adapter OSM device attributes */
+static DEVICE_ATTR(scan, S_IWUSR, NULL, i2o_bus_store_scan);
+
+/**
+ *	i2o_bus_probe - verify if dev is a I2O Bus Adapter device and install it
+ *	@dev: device to verify if it is a I2O Bus Adapter device
+ *
+ *	Because we want all Bus Adapters always return 0.
+ *
+ *	Returns 0.
+ */
+static int i2o_bus_probe(struct device *dev)
+{
+	struct i2o_device *i2o_dev = to_i2o_device(get_device(dev));
+
+	device_create_file(dev, &dev_attr_scan);
+
+	osm_info("device added (TID: %03x)\n", i2o_dev->lct_data.tid);
+
+	return 0;
+};
+
+/**
+ *	i2o_bus_remove - remove the I2O Bus Adapter device from the system again
+ *	@dev: I2O Bus Adapter device which should be removed
+ *
+ *	Always returns 0.
+ */
+static int i2o_bus_remove(struct device *dev)
+{
+	struct i2o_device *i2o_dev = to_i2o_device(dev);
+
+	device_remove_file(dev, &dev_attr_scan);
+
+	put_device(dev);
+
+	osm_info("device removed (TID: %03x)\n", i2o_dev->lct_data.tid);
+
+	return 0;
+};
+
+/* Bus Adapter OSM driver struct */
+static struct i2o_driver i2o_bus_driver = {
+	.name = OSM_NAME,
+	.classes = i2o_bus_class_id,
+	.driver = {
+		   .probe = i2o_bus_probe,
+		   .remove = i2o_bus_remove,
+		   },
+};
+
+/**
+ *	i2o_bus_init - Bus Adapter OSM initialization function
+ *
+ *	Only register the Bus Adapter OSM in the I2O core.
+ *
+ *	Returns 0 on success or negative error code on failure.
+ */
+static int __init i2o_bus_init(void)
+{
+	int rc;
+
+	printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n");
+
+	/* Register Bus Adapter OSM into I2O core */
+	rc = i2o_driver_register(&i2o_bus_driver);
+	if (rc) {
+		osm_err("Could not register Bus Adapter OSM\n");
+		return rc;
+	}
+
+	return 0;
+};
+
+/**
+ *	i2o_bus_exit - Bus Adapter OSM exit function
+ *
+ *	Unregisters Bus Adapter OSM from I2O core.
+ */
+static void __exit i2o_bus_exit(void)
+{
+	i2o_driver_unregister(&i2o_bus_driver);
+};
+
+MODULE_AUTHOR("Markus Lidel <Markus.Lidel@shadowconnect.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(OSM_DESCRIPTION);
+MODULE_VERSION(OSM_VERSION);
+
+module_init(i2o_bus_init);
+module_exit(i2o_bus_exit);
diff --git a/drivers/message/i2o/config-osm.c b/drivers/message/i2o/config-osm.c
new file mode 100644
index 0000000..d026760
--- /dev/null
+++ b/drivers/message/i2o/config-osm.c
@@ -0,0 +1,579 @@
+/*
+ *	Configuration OSM
+ *
+ *	Copyright (C) 2005	Markus Lidel <Markus.Lidel@shadowconnect.com>
+ *
+ *	This program is free software; you can redistribute it and/or modify it
+ *	under the terms of the GNU General Public License as published by the
+ *	Free Software Foundation; either version 2 of the License, or (at your
+ *	option) any later version.
+ *
+ *	Fixes/additions:
+ *		Markus Lidel <Markus.Lidel@shadowconnect.com>
+ *			initial version.
+ */
+
+#include <linux/module.h>
+#include <linux/i2o.h>
+#include <linux/namei.h>
+
+#include <asm/uaccess.h>
+
+#define OSM_NAME	"config-osm"
+#define OSM_VERSION	"1.248"
+#define OSM_DESCRIPTION	"I2O Configuration OSM"
+
+/* access mode user rw */
+#define S_IWRSR (S_IRUSR | S_IWUSR)
+
+static struct i2o_driver i2o_config_driver;
+
+/* Special file operations for sysfs */
+struct fops_attribute {
+	struct bin_attribute bin;
+	struct file_operations fops;
+};
+
+/**
+ *	sysfs_read_dummy
+ */
+static ssize_t sysfs_read_dummy(struct kobject *kobj, char *buf, loff_t offset,
+				size_t count)
+{
+	return 0;
+};
+
+/**
+ *	sysfs_write_dummy
+ */
+static ssize_t sysfs_write_dummy(struct kobject *kobj, char *buf, loff_t offset,
+				 size_t count)
+{
+	return 0;
+};
+
+/**
+ *	sysfs_create_fops_file - Creates attribute with special file operations
+ *	@kobj: kobject which should contains the attribute
+ *	@attr: attributes which should be used to create file
+ *
+ *	First creates attribute @attr in kobject @kobj. If it is the first time
+ *	this function is called, merge old fops from sysfs with new one and
+ *	write it back. Afterwords the new fops will be set for the created
+ *	attribute.
+ *
+ *	Returns 0 on success or negative error code on failure.
+ */
+static int sysfs_create_fops_file(struct kobject *kobj,
+				  struct fops_attribute *attr)
+{
+	struct file_operations tmp, *fops;
+	struct dentry *d;
+	struct qstr qstr;
+	int rc;
+
+	fops = &attr->fops;
+
+	if (fops->read)
+		attr->bin.read = sysfs_read_dummy;
+
+	if (fops->write)
+		attr->bin.write = sysfs_write_dummy;
+
+	if ((rc = sysfs_create_bin_file(kobj, &attr->bin)))
+		return rc;
+
+	qstr.name = attr->bin.attr.name;
+	qstr.len = strlen(qstr.name);
+	qstr.hash = full_name_hash(qstr.name, qstr.len);
+
+	if ((d = lookup_hash(&qstr, kobj->dentry))) {
+		if (!fops->owner) {
+			memcpy(&tmp, d->d_inode->i_fop, sizeof(tmp));
+			if (fops->read)
+				tmp.read = fops->read;
+			if (fops->write)
+				tmp.write = fops->write;
+			memcpy(fops, &tmp, sizeof(tmp));
+		}
+
+		d->d_inode->i_fop = fops;
+	} else
+		sysfs_remove_bin_file(kobj, &attr->bin);
+
+	return -ENOENT;
+};
+
+/**
+ *	sysfs_remove_fops_file - Remove attribute with special file operations
+ *	@kobj: kobject which contains the attribute
+ *	@attr: attributes which are used to create file
+ *
+ *	Only wrapper arround sysfs_remove_bin_file()
+ *
+ *	Returns 0 on success or negative error code on failure.
+ */
+static inline int sysfs_remove_fops_file(struct kobject *kobj,
+					 struct fops_attribute *attr)
+{
+	return sysfs_remove_bin_file(kobj, &attr->bin);
+};
+
+/**
+ *	i2o_config_read_hrt - Returns the HRT of the controller
+ *	@kob: kernel object handle
+ *	@buf: buffer into which the HRT should be copied
+ *	@off: file offset
+ *	@count: number of bytes to read
+ *
+ *	Put @count bytes starting at @off into @buf from the HRT of the I2O
+ *	controller corresponding to @kobj.
+ *
+ *	Returns number of bytes copied into buffer.
+ */
+static ssize_t i2o_config_read_hrt(struct kobject *kobj, char *buf,
+				   loff_t offset, size_t count)
+{
+	struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop;
+	i2o_hrt *hrt = c->hrt.virt;
+
+	u32 size = (hrt->num_entries * hrt->entry_len + 2) * 4;
+
+	if (offset > size)
+		return 0;
+
+	if (offset + count > size)
+		count = size - offset;
+
+	memcpy(buf, (u8 *) hrt + offset, count);
+
+	return count;
+};
+
+/**
+ *	i2o_config_read_lct - Returns the LCT of the controller
+ *	@kob: kernel object handle
+ *	@buf: buffer into which the LCT should be copied
+ *	@off: file offset
+ *	@count: number of bytes to read
+ *
+ *	Put @count bytes starting at @off into @buf from the LCT of the I2O
+ *	controller corresponding to @kobj.
+ *
+ *	Returns number of bytes copied into buffer.
+ */
+static ssize_t i2o_config_read_lct(struct kobject *kobj, char *buf,
+				   loff_t offset, size_t count)
+{
+	struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop;
+	u32 size = c->lct->table_size * 4;
+
+	if (offset > size)
+		return 0;
+
+	if (offset + count > size)
+		count = size - offset;
+
+	memcpy(buf, (u8 *) c->lct + offset, count);
+
+	return count;
+};
+
+#define I2O_CONFIG_SW_ATTR(_name,_mode,_type,_swid) \
+static ssize_t i2o_config_##_name##_read(struct file *file, char __user *buf, size_t count, loff_t * offset) { \
+	return i2o_config_sw_read(file, buf, count, offset, _type, _swid); \
+};\
+\
+static ssize_t i2o_config_##_name##_write(struct file *file, const char __user *buf, size_t count, loff_t * offset) { \
+	return i2o_config_sw_write(file, buf, count, offset, _type, _swid); \
+}; \
+\
+static struct fops_attribute i2o_config_attr_##_name = { \
+	.bin = { .attr = { .name = __stringify(_name), .mode = _mode, \
+			   .owner = THIS_MODULE }, \
+		 .size = 0, }, \
+	.fops = { .write = i2o_config_##_name##_write, \
+		  .read = i2o_config_##_name##_read} \
+};
+
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+
+/**
+ *	i2o_config_dpt_reagion - Converts type and id to flash region
+ *	@swtype: type of software module reading
+ *	@swid: id of software which should be read
+ *
+ *	Converts type and id from I2O spec to the matching region for DPT /
+ *	Adaptec controllers.
+ *
+ *	Returns region which match type and id or -1 on error.
+ */
+static u32 i2o_config_dpt_region(u8 swtype, u8 swid)
+{
+	switch (swtype) {
+	case I2O_SOFTWARE_MODULE_IRTOS:
+		/*
+		 * content: operation firmware
+		 * region size:
+		 *      0xbc000 for 2554, 3754, 2564, 3757
+		 *      0x170000 for 2865
+		 *      0x17c000 for 3966
+		 */
+		if (!swid)
+			return 0;
+
+		break;
+
+	case I2O_SOFTWARE_MODULE_IOP_PRIVATE:
+		/*
+		 * content: BIOS and SMOR
+		 * BIOS size: first 0x8000 bytes
+		 * region size:
+		 *      0x40000 for 2554, 3754, 2564, 3757
+		 *      0x80000 for 2865, 3966
+		 */
+		if (!swid)
+			return 1;
+
+		break;
+
+	case I2O_SOFTWARE_MODULE_IOP_CONFIG:
+		switch (swid) {
+		case 0:
+			/*
+			 * content: NVRAM defaults
+			 * region size: 0x2000 bytes
+			 */
+			return 2;
+		case 1:
+			/*
+			 * content: serial number
+			 * region size: 0x2000 bytes
+			 */
+			return 3;
+		}
+		break;
+	}
+
+	return -1;
+};
+
+#endif
+
+/**
+ *	i2o_config_sw_read - Read a software module from controller
+ *	@file: file pointer
+ *	@buf: buffer into which the data should be copied
+ *	@count: number of bytes to read
+ *	@off: file offset
+ *	@swtype: type of software module reading
+ *	@swid: id of software which should be read
+ *
+ *	Transfers @count bytes at offset @offset from IOP into buffer using
+ *	type @swtype and id @swid as described in I2O spec.
+ *
+ *	Returns number of bytes copied into buffer or error code on failure.
+ */
+static ssize_t i2o_config_sw_read(struct file *file, char __user * buf,
+				  size_t count, loff_t * offset, u8 swtype,
+				  u32 swid)
+{
+	struct sysfs_dirent *sd = file->f_dentry->d_parent->d_fsdata;
+	struct kobject *kobj = sd->s_element;
+	struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop;
+	u32 m, function = I2O_CMD_SW_UPLOAD;
+	struct i2o_dma buffer;
+	struct i2o_message __iomem *msg;
+	u32 __iomem *mptr;
+	int rc, status;
+
+	m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
+	if (m == I2O_QUEUE_EMPTY)
+		return -EBUSY;
+
+	mptr = &msg->body[3];
+
+	if ((rc = i2o_dma_alloc(&c->pdev->dev, &buffer, count, GFP_KERNEL))) {
+		i2o_msg_nop(c, m);
+		return rc;
+	}
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+	if (c->adaptec) {
+		mptr = &msg->body[4];
+		function = I2O_CMD_PRIVATE;
+
+		writel(TEN_WORD_MSG_SIZE | SGL_OFFSET_8, &msg->u.head[0]);
+
+		writel(I2O_VENDOR_DPT << 16 | I2O_DPT_FLASH_READ,
+		       &msg->body[0]);
+		writel(i2o_config_dpt_region(swtype, swid), &msg->body[1]);
+		writel(*offset, &msg->body[2]);
+		writel(count, &msg->body[3]);
+	} else
+#endif
+		writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_7, &msg->u.head[0]);
+
+	writel(0xD0000000 | count, mptr++);
+	writel(buffer.phys, mptr);
+
+	writel(function << 24 | HOST_TID << 12 | ADAPTER_TID, &msg->u.head[1]);
+	writel(i2o_config_driver.context, &msg->u.head[2]);
+	writel(0, &msg->u.head[3]);
+
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+	if (!c->adaptec)
+#endif
+	{
+		writel((u32) swtype << 16 | (u32) 1 << 8, &msg->body[0]);
+		writel(0, &msg->body[1]);
+		writel(swid, &msg->body[2]);
+	}
+
+	status = i2o_msg_post_wait_mem(c, m, 60, &buffer);
+
+	if (status == I2O_POST_WAIT_OK) {
+		if (!(rc = copy_to_user(buf, buffer.virt, count))) {
+			rc = count;
+			*offset += count;
+		}
+	} else
+		rc = -EIO;
+
+	if (status != -ETIMEDOUT)
+		i2o_dma_free(&c->pdev->dev, &buffer);
+
+	return rc;
+};
+
+/**
+ *	i2o_config_sw_write - Write a software module to controller
+ *	@file: file pointer
+ *	@buf: buffer into which the data should be copied
+ *	@count: number of bytes to read
+ *	@off: file offset
+ *	@swtype: type of software module writing
+ *	@swid: id of software which should be written
+ *
+ *	Transfers @count bytes at offset @offset from buffer to IOP using
+ *	type @swtype and id @swid as described in I2O spec.
+ *
+ *	Returns number of bytes copied from buffer or error code on failure.
+ */
+static ssize_t i2o_config_sw_write(struct file *file, const char __user * buf,
+				   size_t count, loff_t * offset, u8 swtype,
+				   u32 swid)
+{
+	struct sysfs_dirent *sd = file->f_dentry->d_parent->d_fsdata;
+	struct kobject *kobj = sd->s_element;
+	struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop;
+	u32 m, function = I2O_CMD_SW_DOWNLOAD;
+	struct i2o_dma buffer;
+	struct i2o_message __iomem *msg;
+	u32 __iomem *mptr;
+	int rc, status;
+
+	m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
+	if (m == I2O_QUEUE_EMPTY)
+		return -EBUSY;
+
+	mptr = &msg->body[3];
+
+	if ((rc = i2o_dma_alloc(&c->pdev->dev, &buffer, count, GFP_KERNEL)))
+		goto nop_msg;
+
+	if ((rc = copy_from_user(buffer.virt, buf, count)))
+		goto free_buffer;
+
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+	if (c->adaptec) {
+		mptr = &msg->body[4];
+		function = I2O_CMD_PRIVATE;
+
+		writel(TEN_WORD_MSG_SIZE | SGL_OFFSET_8, &msg->u.head[0]);
+
+		writel(I2O_VENDOR_DPT << 16 | I2O_DPT_FLASH_WRITE,
+		       &msg->body[0]);
+		writel(i2o_config_dpt_region(swtype, swid), &msg->body[1]);
+		writel(*offset, &msg->body[2]);
+		writel(count, &msg->body[3]);
+	} else
+#endif
+		writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_7, &msg->u.head[0]);
+
+	writel(0xD4000000 | count, mptr++);
+	writel(buffer.phys, mptr);
+
+	writel(function << 24 | HOST_TID << 12 | ADAPTER_TID, &msg->u.head[1]);
+	writel(i2o_config_driver.context, &msg->u.head[2]);
+	writel(0, &msg->u.head[3]);
+
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+	if (!c->adaptec)
+#endif
+	{
+		writel((u32) swtype << 16 | (u32) 1 << 8, &msg->body[0]);
+		writel(0, &msg->body[1]);
+		writel(swid, &msg->body[2]);
+	}
+
+	status = i2o_msg_post_wait_mem(c, m, 60, &buffer);
+
+	if (status != -ETIMEDOUT)
+		i2o_dma_free(&c->pdev->dev, &buffer);
+
+	if (status != I2O_POST_WAIT_OK)
+		return -EIO;
+
+	*offset += count;
+
+	return count;
+
+      free_buffer:
+	i2o_dma_free(&c->pdev->dev, &buffer);
+
+      nop_msg:
+	i2o_msg_nop(c, m);
+
+	return rc;
+};
+
+/* attribute for HRT in sysfs */
+static struct bin_attribute i2o_config_hrt_attr = {
+	.attr = {
+		 .name = "hrt",
+		 .mode = S_IRUGO,
+		 .owner = THIS_MODULE},
+	.size = 0,
+	.read = i2o_config_read_hrt
+};
+
+/* attribute for LCT in sysfs */
+static struct bin_attribute i2o_config_lct_attr = {
+	.attr = {
+		 .name = "lct",
+		 .mode = S_IRUGO,
+		 .owner = THIS_MODULE},
+	.size = 0,
+	.read = i2o_config_read_lct
+};
+
+/* IRTOS firmware access */
+I2O_CONFIG_SW_ATTR(irtos, S_IWRSR, I2O_SOFTWARE_MODULE_IRTOS, 0);
+
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+
+/*
+ * attribute for BIOS / SMOR, nvram and serial number access on DPT / Adaptec
+ * controllers
+ */
+I2O_CONFIG_SW_ATTR(bios, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_PRIVATE, 0);
+I2O_CONFIG_SW_ATTR(nvram, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_CONFIG, 0);
+I2O_CONFIG_SW_ATTR(serial, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_CONFIG, 1);
+
+#endif
+
+/**
+ *	i2o_config_notify_controller_add - Notify of added controller
+ *	@c: the controller which was added
+ *
+ *	If a I2O controller is added, we catch the notification to add sysfs
+ *	entries.
+ */
+static void i2o_config_notify_controller_add(struct i2o_controller *c)
+{
+	struct kobject *kobj = &c->exec->device.kobj;
+
+	sysfs_create_bin_file(kobj, &i2o_config_hrt_attr);
+	sysfs_create_bin_file(kobj, &i2o_config_lct_attr);
+
+	sysfs_create_fops_file(kobj, &i2o_config_attr_irtos);
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+	if (c->adaptec) {
+		sysfs_create_fops_file(kobj, &i2o_config_attr_bios);
+		sysfs_create_fops_file(kobj, &i2o_config_attr_nvram);
+		sysfs_create_fops_file(kobj, &i2o_config_attr_serial);
+	}
+#endif
+};
+
+/**
+ *	i2o_config_notify_controller_remove - Notify of removed controller
+ *	@c: the controller which was removed
+ *
+ *	If a I2O controller is removed, we catch the notification to remove the
+ *	sysfs entries.
+ */
+static void i2o_config_notify_controller_remove(struct i2o_controller *c)
+{
+	struct kobject *kobj = &c->exec->device.kobj;
+
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+	if (c->adaptec) {
+		sysfs_remove_fops_file(kobj, &i2o_config_attr_serial);
+		sysfs_remove_fops_file(kobj, &i2o_config_attr_nvram);
+		sysfs_remove_fops_file(kobj, &i2o_config_attr_bios);
+	}
+#endif
+	sysfs_remove_fops_file(kobj, &i2o_config_attr_irtos);
+
+	sysfs_remove_bin_file(kobj, &i2o_config_lct_attr);
+	sysfs_remove_bin_file(kobj, &i2o_config_hrt_attr);
+};
+
+/* Config OSM driver struct */
+static struct i2o_driver i2o_config_driver = {
+	.name = OSM_NAME,
+	.notify_controller_add = i2o_config_notify_controller_add,
+	.notify_controller_remove = i2o_config_notify_controller_remove
+};
+
+#ifdef CONFIG_I2O_CONFIG_OLD_IOCTL
+#include "i2o_config.c"
+#endif
+
+/**
+ *	i2o_config_init - Configuration OSM initialization function
+ *
+ *	Registers Configuration OSM in the I2O core and if old ioctl's are
+ *	compiled in initialize them.
+ *
+ *	Returns 0 on success or negative error code on failure.
+ */
+static int __init i2o_config_init(void)
+{
+	printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n");
+
+	if (i2o_driver_register(&i2o_config_driver)) {
+		osm_err("handler register failed.\n");
+		return -EBUSY;
+	}
+#ifdef CONFIG_I2O_CONFIG_OLD_IOCTL
+	if (i2o_config_old_init())
+		i2o_driver_unregister(&i2o_config_driver);
+#endif
+
+	return 0;
+}
+
+/**
+ *	i2o_config_exit - Configuration OSM exit function
+ *
+ *	If old ioctl's are compiled in exit remove them and unregisters
+ *	Configuration OSM from I2O core.
+ */
+static void i2o_config_exit(void)
+{
+#ifdef CONFIG_I2O_CONFIG_OLD_IOCTL
+	i2o_config_old_exit();
+#endif
+
+	i2o_driver_unregister(&i2o_config_driver);
+}
+
+MODULE_AUTHOR("Markus Lidel <Markus.Lidel@shadowconnect.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(OSM_DESCRIPTION);
+MODULE_VERSION(OSM_VERSION);
+
+module_init(i2o_config_init);
+module_exit(i2o_config_exit);
diff --git a/drivers/message/i2o/driver.c b/drivers/message/i2o/driver.c
index bebdd50..393be8e 100644
--- a/drivers/message/i2o/driver.c
+++ b/drivers/message/i2o/driver.c
@@ -180,7 +180,13 @@ int i2o_driver_dispatch(struct i2o_controller *c, u32 m)
 {
 	struct i2o_driver *drv;
 	struct i2o_message __iomem *msg = i2o_msg_out_to_virt(c, m);
-	u32 context = readl(&msg->u.s.icntxt);
+	u32 context;
+	unsigned long flags;
+
+	if(unlikely(!msg))
+		return -EIO;
+
+	context = readl(&msg->u.s.icntxt);
 
 	if (unlikely(context >= i2o_max_drivers)) {
 		osm_warn("%s: Spurious reply to unknown driver %d\n", c->name,
@@ -188,9 +194,9 @@ int i2o_driver_dispatch(struct i2o_controller *c, u32 m)
 		return -EIO;
 	}
 
-	spin_lock(&i2o_drivers_lock);
+	spin_lock_irqsave(&i2o_drivers_lock, flags);
 	drv = i2o_drivers[context];
-	spin_unlock(&i2o_drivers_lock);
+	spin_unlock_irqrestore(&i2o_drivers_lock, flags);
 
 	if (unlikely(!drv)) {
 		osm_warn("%s: Spurious reply to unknown driver %d\n", c->name,
diff --git a/drivers/message/i2o/exec-osm.c b/drivers/message/i2o/exec-osm.c
index 5581344..0160221 100644
--- a/drivers/message/i2o/exec-osm.c
+++ b/drivers/message/i2o/exec-osm.c
@@ -206,6 +206,7 @@ static int i2o_msg_post_wait_complete(struct i2o_controller *c, u32 m,
 				      u32 context)
 {
 	struct i2o_exec_wait *wait, *tmp;
+	unsigned long flags;
 	static spinlock_t lock = SPIN_LOCK_UNLOCKED;
 	int rc = 1;
 
@@ -216,11 +217,13 @@ static int i2o_msg_post_wait_complete(struct i2o_controller *c, u32 m,
 	 * already expired. Not much we can do about that except log it for
 	 * debug purposes, increase timeout, and recompile.
 	 */
-	spin_lock(&lock);
+	spin_lock_irqsave(&lock, flags);
 	list_for_each_entry_safe(wait, tmp, &i2o_exec_wait_list, list) {
 		if (wait->tcntxt == context) {
 			list_del(&wait->list);
 
+			spin_unlock_irqrestore(&lock, flags);
+
 			wait->m = m;
 			wait->msg = msg;
 			wait->complete = 1;
@@ -242,13 +245,11 @@ static int i2o_msg_post_wait_complete(struct i2o_controller *c, u32 m,
 				rc = -1;
 			}
 
-			spin_unlock(&lock);
-
 			return rc;
 		}
 	}
 
-	spin_unlock(&lock);
+	spin_unlock_irqrestore(&lock, flags);
 
 	osm_warn("%s: Bogus reply in POST WAIT (tr-context: %08x)!\n", c->name,
 		 context);
@@ -257,6 +258,50 @@ static int i2o_msg_post_wait_complete(struct i2o_controller *c, u32 m,
 };
 
 /**
+ *	i2o_exec_show_vendor_id - Displays Vendor ID of controller
+ *	@d: device of which the Vendor ID should be displayed
+ *	@buf: buffer into which the Vendor ID should be printed
+ *
+ *	Returns number of bytes printed into buffer.
+ */
+static ssize_t i2o_exec_show_vendor_id(struct device *d, char *buf)
+{
+	struct i2o_device *dev = to_i2o_device(d);
+	u16 id;
+
+	if (i2o_parm_field_get(dev, 0x0000, 0, &id, 2)) {
+		sprintf(buf, "0x%04x", id);
+		return strlen(buf) + 1;
+	}
+
+	return 0;
+};
+
+/**
+ *	i2o_exec_show_product_id - Displays Product ID of controller
+ *	@d: device of which the Product ID should be displayed
+ *	@buf: buffer into which the Product ID should be printed
+ *
+ *	Returns number of bytes printed into buffer.
+ */
+static ssize_t i2o_exec_show_product_id(struct device *d, char *buf)
+{
+	struct i2o_device *dev = to_i2o_device(d);
+	u16 id;
+
+	if (i2o_parm_field_get(dev, 0x0000, 1, &id, 2)) {
+		sprintf(buf, "0x%04x", id);
+		return strlen(buf) + 1;
+	}
+
+	return 0;
+};
+
+/* Exec-OSM device attributes */
+static DEVICE_ATTR(vendor_id, S_IRUGO, i2o_exec_show_vendor_id, NULL);
+static DEVICE_ATTR(product_id, S_IRUGO, i2o_exec_show_product_id, NULL);
+
+/**
  *	i2o_exec_probe - Called if a new I2O device (executive class) appears
  *	@dev: I2O device which should be probed
  *
@@ -268,10 +313,16 @@ static int i2o_msg_post_wait_complete(struct i2o_controller *c, u32 m,
 static int i2o_exec_probe(struct device *dev)
 {
 	struct i2o_device *i2o_dev = to_i2o_device(dev);
+	struct i2o_controller *c = i2o_dev->iop;
 
 	i2o_event_register(i2o_dev, &i2o_exec_driver, 0, 0xffffffff);
 
-	i2o_dev->iop->exec = i2o_dev;
+	c->exec = i2o_dev;
+
+	i2o_exec_lct_notify(c, c->lct->change_ind + 1);
+
+	device_create_file(dev, &dev_attr_vendor_id);
+	device_create_file(dev, &dev_attr_product_id);
 
 	return 0;
 };
@@ -286,6 +337,9 @@ static int i2o_exec_probe(struct device *dev)
  */
 static int i2o_exec_remove(struct device *dev)
 {
+	device_remove_file(dev, &dev_attr_product_id);
+	device_remove_file(dev, &dev_attr_vendor_id);
+
 	i2o_event_register(to_i2o_device(dev), &i2o_exec_driver, 0, 0);
 
 	return 0;
@@ -297,12 +351,16 @@ static int i2o_exec_remove(struct device *dev)
  *
  *	This function handles asynchronus LCT NOTIFY replies. It parses the
  *	new LCT and if the buffer for the LCT was to small sends a LCT NOTIFY
- *	again.
+ *	again, otherwise send LCT NOTIFY to get informed on next LCT change.
  */
 static void i2o_exec_lct_modified(struct i2o_controller *c)
 {
-	if (i2o_device_parse_lct(c) == -EAGAIN)
-		i2o_exec_lct_notify(c, 0);
+	u32 change_ind = 0;
+
+	if (i2o_device_parse_lct(c) != -EAGAIN)
+		change_ind = c->lct->change_ind + 1;
+
+	i2o_exec_lct_notify(c, change_ind);
 };
 
 /**
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index e69421e..1dd2b9d 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -147,6 +147,29 @@ static int i2o_block_device_flush(struct i2o_device *dev)
 };
 
 /**
+ *	i2o_block_issue_flush - device-flush interface for block-layer
+ *	@queue: the request queue of the device which should be flushed
+ *	@disk: gendisk
+ *	@error_sector: error offset
+ *
+ *	Helper function to provide flush functionality to block-layer.
+ *
+ *	Returns 0 on success or negative error code on failure.
+ */
+
+static int i2o_block_issue_flush(request_queue_t * queue, struct gendisk *disk,
+				 sector_t * error_sector)
+{
+	struct i2o_block_device *i2o_blk_dev = queue->queuedata;
+	int rc = -ENODEV;
+
+	if (likely(i2o_blk_dev))
+		rc = i2o_block_device_flush(i2o_blk_dev->i2o_dev);
+
+	return rc;
+}
+
+/**
  *	i2o_block_device_mount - Mount (load) the media of device dev
  *	@dev: I2O device which should receive the mount request
  *	@media_id: Media Identifier
@@ -299,28 +322,31 @@ static inline void i2o_block_request_free(struct i2o_block_request *ireq)
 
 /**
  *	i2o_block_sglist_alloc - Allocate the SG list and map it
+ *	@c: I2O controller to which the request belongs
  *	@ireq: I2O block request
  *
- *	Builds the SG list and map it into to be accessable by the controller.
+ *	Builds the SG list and map it to be accessable by the controller.
  *
- *	Returns the number of elements in the SG list or 0 on failure.
+ *	Returns 0 on failure or 1 on success.
  */
-static inline int i2o_block_sglist_alloc(struct i2o_block_request *ireq)
+static inline int i2o_block_sglist_alloc(struct i2o_controller *c,
+					 struct i2o_block_request *ireq,
+					 u32 __iomem ** mptr)
 {
-	struct device *dev = &ireq->i2o_blk_dev->i2o_dev->iop->pdev->dev;
 	int nents;
+	enum dma_data_direction direction;
 
+	ireq->dev = &c->pdev->dev;
 	nents = blk_rq_map_sg(ireq->req->q, ireq->req, ireq->sg_table);
 
 	if (rq_data_dir(ireq->req) == READ)
-		ireq->sg_dma_direction = PCI_DMA_FROMDEVICE;
+		direction = PCI_DMA_FROMDEVICE;
 	else
-		ireq->sg_dma_direction = PCI_DMA_TODEVICE;
+		direction = PCI_DMA_TODEVICE;
 
-	ireq->sg_nents = dma_map_sg(dev, ireq->sg_table, nents,
-				    ireq->sg_dma_direction);
+	ireq->sg_nents = nents;
 
-	return ireq->sg_nents;
+	return i2o_dma_map_sg(c, ireq->sg_table, nents, direction, mptr);
 };
 
 /**
@@ -331,10 +357,14 @@ static inline int i2o_block_sglist_alloc(struct i2o_block_request *ireq)
  */
 static inline void i2o_block_sglist_free(struct i2o_block_request *ireq)
 {
-	struct device *dev = &ireq->i2o_blk_dev->i2o_dev->iop->pdev->dev;
+	enum dma_data_direction direction;
 
-	dma_unmap_sg(dev, ireq->sg_table, ireq->sg_nents,
-		     ireq->sg_dma_direction);
+	if (rq_data_dir(ireq->req) == READ)
+		direction = PCI_DMA_FROMDEVICE;
+	else
+		direction = PCI_DMA_TODEVICE;
+
+	dma_unmap_sg(ireq->dev, ireq->sg_table, ireq->sg_nents, direction);
 };
 
 /**
@@ -352,6 +382,11 @@ static int i2o_block_prep_req_fn(struct request_queue *q, struct request *req)
 	struct i2o_block_device *i2o_blk_dev = q->queuedata;
 	struct i2o_block_request *ireq;
 
+	if (unlikely(!i2o_blk_dev)) {
+		osm_err("block device already removed\n");
+		return BLKPREP_KILL;
+	}
+
 	/* request is already processed by us, so return */
 	if (req->flags & REQ_SPECIAL) {
 		osm_debug("REQ_SPECIAL already set!\n");
@@ -414,11 +449,11 @@ static void i2o_block_end_request(struct request *req, int uptodate,
 {
 	struct i2o_block_request *ireq = req->special;
 	struct i2o_block_device *dev = ireq->i2o_blk_dev;
-	request_queue_t *q = dev->gd->queue;
+	request_queue_t *q = req->q;
 	unsigned long flags;
 
 	if (end_that_request_chunk(req, uptodate, nr_bytes)) {
-		int leftover = (req->hard_nr_sectors << 9);
+		int leftover = (req->hard_nr_sectors << KERNEL_SECTOR_SHIFT);
 
 		if (blk_pc_request(req))
 			leftover = req->data_len;
@@ -432,8 +467,11 @@ static void i2o_block_end_request(struct request *req, int uptodate,
 	spin_lock_irqsave(q->queue_lock, flags);
 
 	end_that_request_last(req);
-	dev->open_queue_depth--;
-	list_del(&ireq->queue);
+
+	if (likely(dev)) {
+		dev->open_queue_depth--;
+		list_del(&ireq->queue);
+	}
 
 	blk_start_queue(q);
 
@@ -483,8 +521,8 @@ static int i2o_block_reply(struct i2o_controller *c, u32 m,
 		 *      Don't stick a supertrak100 into cache aggressive modes
 		 */
 
-		osm_err("%03x error status: %02x, detailed status: %04x\n",
-			(le32_to_cpu(msg->u.head[1]) >> 12 & 0xfff),
+		osm_err("TID %03x error status: 0x%02x, detailed status: "
+			"0x%04x\n", (le32_to_cpu(msg->u.head[1]) >> 12 & 0xfff),
 			status >> 24, status & 0xffff);
 
 		req->errors++;
@@ -705,18 +743,25 @@ static int i2o_block_media_changed(struct gendisk *disk)
 static int i2o_block_transfer(struct request *req)
 {
 	struct i2o_block_device *dev = req->rq_disk->private_data;
-	struct i2o_controller *c = dev->i2o_dev->iop;
+	struct i2o_controller *c;
 	int tid = dev->i2o_dev->lct_data.tid;
 	struct i2o_message __iomem *msg;
-	void __iomem *mptr;
+	u32 __iomem *mptr;
 	struct i2o_block_request *ireq = req->special;
-	struct scatterlist *sg;
-	int sgnum;
-	int i;
 	u32 m;
 	u32 tcntxt;
-	u32 sg_flags;
+	u32 sgl_offset = SGL_OFFSET_8;
+	u32 ctl_flags = 0x00000000;
 	int rc;
+	u32 cmd;
+
+	if (unlikely(!dev->i2o_dev)) {
+		osm_err("transfer to removed drive\n");
+		rc = -ENODEV;
+		goto exit;
+	}
+
+	c = dev->i2o_dev->iop;
 
 	m = i2o_msg_get(c, &msg);
 	if (m == I2O_QUEUE_EMPTY) {
@@ -730,80 +775,109 @@ static int i2o_block_transfer(struct request *req)
 		goto nop_msg;
 	}
 
-	if ((sgnum = i2o_block_sglist_alloc(ireq)) <= 0) {
-		rc = -ENOMEM;
-		goto context_remove;
-	}
-
-	/* Build the message based on the request. */
 	writel(i2o_block_driver.context, &msg->u.s.icntxt);
 	writel(tcntxt, &msg->u.s.tcntxt);
-	writel(req->nr_sectors << 9, &msg->body[1]);
 
-	writel((((u64) req->sector) << 9) & 0xffffffff, &msg->body[2]);
-	writel(req->sector >> 23, &msg->body[3]);
-
-	mptr = &msg->body[4];
-
-	sg = ireq->sg_table;
+	mptr = &msg->body[0];
 
 	if (rq_data_dir(req) == READ) {
-		writel(I2O_CMD_BLOCK_READ << 24 | HOST_TID << 12 | tid,
-		       &msg->u.head[1]);
-		sg_flags = 0x10000000;
+		cmd = I2O_CMD_BLOCK_READ << 24;
+
 		switch (dev->rcache) {
-		case CACHE_NULL:
-			writel(0, &msg->body[0]);
-			break;
 		case CACHE_PREFETCH:
-			writel(0x201F0008, &msg->body[0]);
+			ctl_flags = 0x201F0008;
 			break;
+
 		case CACHE_SMARTFETCH:
 			if (req->nr_sectors > 16)
-				writel(0x201F0008, &msg->body[0]);
+				ctl_flags = 0x201F0008;
 			else
-				writel(0x001F0000, &msg->body[0]);
+				ctl_flags = 0x001F0000;
+			break;
+
+		default:
 			break;
 		}
 	} else {
-		writel(I2O_CMD_BLOCK_WRITE << 24 | HOST_TID << 12 | tid,
-		       &msg->u.head[1]);
-		sg_flags = 0x14000000;
+		cmd = I2O_CMD_BLOCK_WRITE << 24;
+
 		switch (dev->wcache) {
-		case CACHE_NULL:
-			writel(0, &msg->body[0]);
-			break;
 		case CACHE_WRITETHROUGH:
-			writel(0x001F0008, &msg->body[0]);
+			ctl_flags = 0x001F0008;
 			break;
 		case CACHE_WRITEBACK:
-			writel(0x001F0010, &msg->body[0]);
+			ctl_flags = 0x001F0010;
 			break;
 		case CACHE_SMARTBACK:
 			if (req->nr_sectors > 16)
-				writel(0x001F0004, &msg->body[0]);
+				ctl_flags = 0x001F0004;
 			else
-				writel(0x001F0010, &msg->body[0]);
+				ctl_flags = 0x001F0010;
 			break;
 		case CACHE_SMARTTHROUGH:
 			if (req->nr_sectors > 16)
-				writel(0x001F0004, &msg->body[0]);
+				ctl_flags = 0x001F0004;
 			else
-				writel(0x001F0010, &msg->body[0]);
+				ctl_flags = 0x001F0010;
+		default:
+			break;
+		}
+	}
+
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+	if (c->adaptec) {
+		u8 cmd[10];
+		u32 scsi_flags;
+		u16 hwsec = queue_hardsect_size(req->q) >> KERNEL_SECTOR_SHIFT;
+
+		memset(cmd, 0, 10);
+
+		sgl_offset = SGL_OFFSET_12;
+
+		writel(I2O_CMD_PRIVATE << 24 | HOST_TID << 12 | tid,
+		       &msg->u.head[1]);
+
+		writel(I2O_VENDOR_DPT << 16 | I2O_CMD_SCSI_EXEC, mptr++);
+		writel(tid, mptr++);
+
+		/*
+		 * ENABLE_DISCONNECT
+		 * SIMPLE_TAG
+		 * RETURN_SENSE_DATA_IN_REPLY_MESSAGE_FRAME
+		 */
+		if (rq_data_dir(req) == READ) {
+			cmd[0] = 0x28;
+			scsi_flags = 0x60a0000a;
+		} else {
+			cmd[0] = 0x2A;
+			scsi_flags = 0xa0a0000a;
 		}
+
+		writel(scsi_flags, mptr++);
+
+		*((u32 *) & cmd[2]) = cpu_to_be32(req->sector * hwsec);
+		*((u16 *) & cmd[7]) = cpu_to_be16(req->nr_sectors * hwsec);
+
+		memcpy_toio(mptr, cmd, 10);
+		mptr += 4;
+		writel(req->nr_sectors << KERNEL_SECTOR_SHIFT, mptr++);
+	} else
+#endif
+	{
+		writel(cmd | HOST_TID << 12 | tid, &msg->u.head[1]);
+		writel(ctl_flags, mptr++);
+		writel(req->nr_sectors << KERNEL_SECTOR_SHIFT, mptr++);
+		writel((u32) (req->sector << KERNEL_SECTOR_SHIFT), mptr++);
+		writel(req->sector >> (32 - KERNEL_SECTOR_SHIFT), mptr++);
 	}
 
-	for (i = sgnum; i > 0; i--) {
-		if (i == 1)
-			sg_flags |= 0x80000000;
-		writel(sg_flags | sg_dma_len(sg), mptr);
-		writel(sg_dma_address(sg), mptr + 4);
-		mptr += 8;
-		sg++;
+	if (!i2o_block_sglist_alloc(c, ireq, &mptr)) {
+		rc = -ENOMEM;
+		goto context_remove;
 	}
 
-	writel(I2O_MESSAGE_SIZE(mptr - &msg->u.head[0]) | SGL_OFFSET_8,
-	       &msg->u.head[0]);
+	writel(I2O_MESSAGE_SIZE(mptr - &msg->u.head[0]) |
+	       sgl_offset, &msg->u.head[0]);
 
 	list_add_tail(&ireq->queue, &dev->open_queue);
 	dev->open_queue_depth++;
@@ -846,11 +920,13 @@ static void i2o_block_request_fn(struct request_queue *q)
 
 			queue_depth = ireq->i2o_blk_dev->open_queue_depth;
 
-			if (queue_depth < I2O_BLOCK_MAX_OPEN_REQUESTS)
+			if (queue_depth < I2O_BLOCK_MAX_OPEN_REQUESTS) {
 				if (!i2o_block_transfer(req)) {
 					blkdev_dequeue_request(req);
 					continue;
-				}
+				} else
+					osm_info("transfer error\n");
+			}
 
 			if (queue_depth)
 				break;
@@ -933,6 +1009,7 @@ static struct i2o_block_device *i2o_block_device_alloc(void)
 	}
 
 	blk_queue_prep_rq(queue, i2o_block_prep_req_fn);
+	blk_queue_issue_flush_fn(queue, i2o_block_issue_flush);
 
 	gd->major = I2O_MAJOR;
 	gd->queue = queue;
@@ -974,7 +1051,18 @@ static int i2o_block_probe(struct device *dev)
 	u64 size;
 	u32 blocksize;
 	u32 flags, status;
-	int segments;
+	u16 body_size = 4;
+	unsigned short max_sectors;
+
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+	if (c->adaptec)
+		body_size = 8;
+#endif
+
+	if (c->limit_sectors)
+		max_sectors = I2O_MAX_SECTORS_LIMITED;
+	else
+		max_sectors = I2O_MAX_SECTORS;
 
 	/* skip devices which are used by IOP */
 	if (i2o_dev->lct_data.user_tid != 0xfff) {
@@ -1009,50 +1097,35 @@ static int i2o_block_probe(struct device *dev)
 	queue = gd->queue;
 	queue->queuedata = i2o_blk_dev;
 
-	blk_queue_max_phys_segments(queue, I2O_MAX_SEGMENTS);
-	blk_queue_max_sectors(queue, I2O_MAX_SECTORS);
-
-	if (c->short_req)
-		segments = 8;
-	else {
-		i2o_status_block *sb;
+	blk_queue_max_phys_segments(queue, I2O_MAX_PHYS_SEGMENTS);
+	blk_queue_max_sectors(queue, max_sectors);
+	blk_queue_max_hw_segments(queue, i2o_sg_tablesize(c, body_size));
 
-		sb = c->status_block.virt;
-
-		segments = (sb->inbound_frame_size -
-			    sizeof(struct i2o_message) / 4 - 4) / 2;
-	}
-
-	blk_queue_max_hw_segments(queue, segments);
-
-	osm_debug("max sectors = %d\n", I2O_MAX_SECTORS);
-	osm_debug("phys segments = %d\n", I2O_MAX_SEGMENTS);
-	osm_debug("hw segments = %d\n", segments);
+	osm_debug("max sectors = %d\n", queue->max_phys_segments);
+	osm_debug("phys segments = %d\n", queue->max_sectors);
+	osm_debug("max hw segments = %d\n", queue->max_hw_segments);
 
 	/*
 	 *      Ask for the current media data. If that isn't supported
 	 *      then we ask for the device capacity data
 	 */
-	if (!i2o_parm_field_get(i2o_dev, 0x0004, 0, &size, 8))
-		if (!i2o_parm_field_get(i2o_dev, 0x0000, 4, &size, 8)) {
-			osm_warn("could not get size of %s\n", gd->disk_name);
-			size = 0;
-		}
+	if (i2o_parm_field_get(i2o_dev, 0x0004, 1, &blocksize, 4) ||
+	    i2o_parm_field_get(i2o_dev, 0x0000, 3, &blocksize, 4)) {
+		blk_queue_hardsect_size(queue, blocksize);
+	} else
+		osm_warn("unable to get blocksize of %s\n", gd->disk_name);
 
-	if (!i2o_parm_field_get(i2o_dev, 0x0004, 1, &blocksize, 4))
-		if (!i2o_parm_field_get(i2o_dev, 0x0000, 3, &blocksize, 4)) {
-			osm_warn("unable to get blocksize of %s\n",
-				 gd->disk_name);
-			blocksize = 0;
-		}
+	if (i2o_parm_field_get(i2o_dev, 0x0004, 0, &size, 8) ||
+	    i2o_parm_field_get(i2o_dev, 0x0000, 4, &size, 8)) {
+		set_capacity(gd, size >> KERNEL_SECTOR_SHIFT);
+	} else
+		osm_warn("could not get size of %s\n", gd->disk_name);
 
 	if (!i2o_parm_field_get(i2o_dev, 0x0000, 2, &i2o_blk_dev->power, 2))
 		i2o_blk_dev->power = 0;
 	i2o_parm_field_get(i2o_dev, 0x0000, 5, &flags, 4);
 	i2o_parm_field_get(i2o_dev, 0x0000, 6, &status, 4);
 
-	set_capacity(gd, size >> 9);
-
 	i2o_event_register(i2o_dev, &i2o_block_driver, 0, 0xffffffff);
 
 	add_disk(gd);
@@ -1109,7 +1182,7 @@ static int __init i2o_block_init(void)
 		goto exit;
 	}
 
-	i2o_blk_req_pool.pool = mempool_create(I2O_REQ_MEMPOOL_SIZE,
+	i2o_blk_req_pool.pool = mempool_create(I2O_BLOCK_REQ_MEMPOOL_SIZE,
 					       mempool_alloc_slab,
 					       mempool_free_slab,
 					       i2o_blk_req_pool.slab);
diff --git a/drivers/message/i2o/i2o_block.h b/drivers/message/i2o/i2o_block.h
index 712111f..9e1a95f 100644
--- a/drivers/message/i2o/i2o_block.h
+++ b/drivers/message/i2o/i2o_block.h
@@ -84,9 +84,9 @@ struct i2o_block_request
 	struct list_head queue;
 	struct request *req;		/* corresponding request */
 	struct i2o_block_device *i2o_blk_dev;	/* I2O block device */
-	int sg_dma_direction;		/* direction of DMA buffer read/write */
+	struct device *dev;		/* device used for DMA */
 	int sg_nents;			/* number of SG elements */
-	struct scatterlist sg_table[I2O_MAX_SEGMENTS]; /* SG table */
+	struct scatterlist sg_table[I2O_MAX_PHYS_SEGMENTS]; /* SG table */
 };
 
 /* I2O Block device delayed request */
diff --git a/drivers/message/i2o/i2o_config.c b/drivers/message/i2o/i2o_config.c
index 383e89a..849d90a 100644
--- a/drivers/message/i2o/i2o_config.c
+++ b/drivers/message/i2o/i2o_config.c
@@ -30,27 +30,11 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/i2o.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
 #include <linux/miscdevice.h>
-#include <linux/mm.h>
-#include <linux/spinlock.h>
 #include <linux/smp_lock.h>
-#include <linux/ioctl32.h>
 #include <linux/compat.h>
-#include <linux/syscalls.h>
 
 #include <asm/uaccess.h>
-#include <asm/io.h>
-
-#define OSM_NAME	"config-osm"
-#define OSM_VERSION	"$Rev$"
-#define OSM_DESCRIPTION	"I2O Configuration OSM"
 
 extern int i2o_parm_issue(struct i2o_device *, int, void *, int, void *, int);
 
@@ -80,125 +64,6 @@ struct i2o_cfg_info {
 static struct i2o_cfg_info *open_files = NULL;
 static ulong i2o_cfg_info_id = 0;
 
-/**
- *	i2o_config_read_hrt - Returns the HRT of the controller
- *	@kob: kernel object handle
- *	@buf: buffer into which the HRT should be copied
- *	@off: file offset
- *	@count: number of bytes to read
- *
- *	Put @count bytes starting at @off into @buf from the HRT of the I2O
- *	controller corresponding to @kobj.
- *
- *	Returns number of bytes copied into buffer.
- */
-static ssize_t i2o_config_read_hrt(struct kobject *kobj, char *buf,
-				   loff_t offset, size_t count)
-{
-	struct i2o_controller *c = to_i2o_controller(container_of(kobj,
-								  struct device,
-								  kobj));
-	i2o_hrt *hrt = c->hrt.virt;
-
-	u32 size = (hrt->num_entries * hrt->entry_len + 2) * 4;
-
-	if(offset > size)
-		return 0;
-
-	if(offset + count > size)
-		count = size - offset;
-
-	memcpy(buf, (u8 *) hrt + offset, count);
-
-	return count;
-};
-
-/**
- *	i2o_config_read_lct - Returns the LCT of the controller
- *	@kob: kernel object handle
- *	@buf: buffer into which the LCT should be copied
- *	@off: file offset
- *	@count: number of bytes to read
- *
- *	Put @count bytes starting at @off into @buf from the LCT of the I2O
- *	controller corresponding to @kobj.
- *
- *	Returns number of bytes copied into buffer.
- */
-static ssize_t i2o_config_read_lct(struct kobject *kobj, char *buf,
-				   loff_t offset, size_t count)
-{
-	struct i2o_controller *c = to_i2o_controller(container_of(kobj,
-								  struct device,
-								  kobj));
-	u32 size = c->lct->table_size * 4;
-
-	if(offset > size)
-		return 0;
-
-	if(offset + count > size)
-		count = size - offset;
-
-	memcpy(buf, (u8 *) c->lct + offset, count);
-
-	return count;
-};
-
-/* attribute for HRT in sysfs */
-static struct bin_attribute i2o_config_hrt_attr = {
-	.attr = {
-		.name = "hrt",
-		.mode = S_IRUGO,
-		.owner = THIS_MODULE
-	},
-	.size = 0,
-	.read = i2o_config_read_hrt
-};
-
-/* attribute for LCT in sysfs */
-static struct bin_attribute i2o_config_lct_attr = {
-	.attr = {
-		.name = "lct",
-		.mode = S_IRUGO,
-		.owner = THIS_MODULE
-	},
-	.size = 0,
-	.read = i2o_config_read_lct
-};
-
-/**
- *	i2o_config_notify_controller_add - Notify of added controller
- *	@c: the controller which was added
- *
- *	If a I2O controller is added, we catch the notification to add sysfs
- *	entries.
- */
-static void i2o_config_notify_controller_add(struct i2o_controller *c)
-{
-	sysfs_create_bin_file(&(c->device.kobj), &i2o_config_hrt_attr);
-	sysfs_create_bin_file(&(c->device.kobj), &i2o_config_lct_attr);
-};
-
-/**
- *	i2o_config_notify_controller_remove - Notify of removed controller
- *	@c: the controller which was removed
- *
- *	If a I2O controller is removed, we catch the notification to remove the
- *	sysfs entries.
- */
-static void i2o_config_notify_controller_remove(struct i2o_controller *c)
-{
-	sysfs_remove_bin_file(&c->device.kobj, &i2o_config_lct_attr);
-	sysfs_remove_bin_file(&c->device.kobj, &i2o_config_hrt_attr);
-};
-
-/* Config OSM driver struct */
-static struct i2o_driver i2o_config_driver = {
-	.name = OSM_NAME,
-	.notify_controller_add = i2o_config_notify_controller_add,
-	.notify_controller_remove = i2o_config_notify_controller_remove
-};
-
 static int i2o_cfg_getiops(unsigned long arg)
 {
 	struct i2o_controller *c;
@@ -1257,37 +1122,20 @@ static struct miscdevice i2o_miscdev = {
 	&config_fops
 };
 
-static int __init i2o_config_init(void)
+static int __init i2o_config_old_init(void)
 {
-	printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n");
-
 	spin_lock_init(&i2o_config_lock);
 
 	if (misc_register(&i2o_miscdev) < 0) {
 		osm_err("can't register device.\n");
 		return -EBUSY;
 	}
-	/*
-	 *      Install our handler
-	 */
-	if (i2o_driver_register(&i2o_config_driver)) {
-		osm_err("handler register failed.\n");
-		misc_deregister(&i2o_miscdev);
-		return -EBUSY;
-	}
 	return 0;
 }
 
-static void i2o_config_exit(void)
+static void i2o_config_old_exit(void)
 {
 	misc_deregister(&i2o_miscdev);
-	i2o_driver_unregister(&i2o_config_driver);
 }
 
 MODULE_AUTHOR("Red Hat Software");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION(OSM_DESCRIPTION);
-MODULE_VERSION(OSM_VERSION);
-
-module_init(i2o_config_init);
-module_exit(i2o_config_exit);
diff --git a/drivers/message/i2o/i2o_proc.c b/drivers/message/i2o/i2o_proc.c
index b176d0e..e5b7445 100644
--- a/drivers/message/i2o/i2o_proc.c
+++ b/drivers/message/i2o/i2o_proc.c
@@ -228,7 +228,7 @@ static const char *i2o_get_class_name(int class)
 	case I2O_CLASS_FLOPPY_DEVICE:
 		idx = 12;
 		break;
-	case I2O_CLASS_BUS_ADAPTER_PORT:
+	case I2O_CLASS_BUS_ADAPTER:
 		idx = 13;
 		break;
 	case I2O_CLASS_PEER_TRANSPORT_AGENT:
@@ -490,7 +490,7 @@ static int i2o_seq_show_lct(struct seq_file *seq, void *v)
 				seq_printf(seq, ", Unknown Device Type");
 			break;
 
-		case I2O_CLASS_BUS_ADAPTER_PORT:
+		case I2O_CLASS_BUS_ADAPTER:
 			if (lct->lct_entry[i].sub_class < BUS_TABLE_SIZE)
 				seq_printf(seq, ", %s",
 					   bus_ports[lct->lct_entry[i].
diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c
index 812c29e..c3b0c29 100644
--- a/drivers/message/i2o/i2o_scsi.c
+++ b/drivers/message/i2o/i2o_scsi.c
@@ -103,7 +103,7 @@ static struct i2o_scsi_host *i2o_scsi_host_alloc(struct i2o_controller *c)
 	i2o_status_block *sb;
 
 	list_for_each_entry(i2o_dev, &c->devices, list)
-	    if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER_PORT) {
+	    if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER) {
 		if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1)
 		   && (type == 0x01))	/* SCSI bus */
 			max_channel++;
@@ -139,7 +139,7 @@ static struct i2o_scsi_host *i2o_scsi_host_alloc(struct i2o_controller *c)
 
 	i = 0;
 	list_for_each_entry(i2o_dev, &c->devices, list)
-	    if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER_PORT) {
+	    if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER) {
 		if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1) || (type == 1))	/* only SCSI bus */
 			i2o_shost->channel[i++] = i2o_dev;
 
@@ -186,6 +186,7 @@ static int i2o_scsi_remove(struct device *dev)
 
 	shost_for_each_device(scsi_dev, i2o_shost->scsi_host)
 	    if (scsi_dev->hostdata == i2o_dev) {
+		sysfs_remove_link(&i2o_dev->device.kobj, "scsi");
 		scsi_remove_device(scsi_dev);
 		scsi_device_put(scsi_dev);
 		break;
@@ -259,12 +260,14 @@ static int i2o_scsi_probe(struct device *dev)
 	scsi_dev =
 	    __scsi_add_device(i2o_shost->scsi_host, channel, id, lun, i2o_dev);
 
-	if (!scsi_dev) {
+	if (IS_ERR(scsi_dev)) {
 		osm_warn("can not add SCSI device %03x\n",
 			 i2o_dev->lct_data.tid);
-		return -EFAULT;
+		return PTR_ERR(scsi_dev);
 	}
 
+	sysfs_create_link(&i2o_dev->device.kobj, &scsi_dev->sdev_gendev.kobj, "scsi");
+
 	osm_info("device added (TID: %03x) channel: %d, id: %d, lun: %d\n",
 		 i2o_dev->lct_data.tid, channel, id, (unsigned int)lun);
 
@@ -545,7 +548,13 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
 	int tid;
 	struct i2o_message __iomem *msg;
 	u32 m;
-	u32 scsi_flags, sg_flags;
+	/*
+	 * ENABLE_DISCONNECT
+	 * SIMPLE_TAG
+	 * RETURN_SENSE_DATA_IN_REPLY_MESSAGE_FRAME
+	 */
+	u32 scsi_flags = 0x20a00000;
+	u32 sg_flags;
 	u32 __iomem *mptr;
 	u32 __iomem *lenptr;
 	u32 len;
@@ -591,17 +600,19 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
 
 	switch (SCpnt->sc_data_direction) {
 	case PCI_DMA_NONE:
-		scsi_flags = 0x00000000;	// DATA NO XFER
+		/* DATA NO XFER */
 		sg_flags = 0x00000000;
 		break;
 
 	case PCI_DMA_TODEVICE:
-		scsi_flags = 0x80000000;	// DATA OUT (iop-->dev)
+		/* DATA OUT (iop-->dev) */
+		scsi_flags |= 0x80000000;
 		sg_flags = 0x14000000;
 		break;
 
 	case PCI_DMA_FROMDEVICE:
-		scsi_flags = 0x40000000;	// DATA IN  (iop<--dev)
+		/* DATA IN  (iop<--dev) */
+		scsi_flags |= 0x40000000;
 		sg_flags = 0x10000000;
 		break;
 
@@ -639,8 +650,7 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
 	   }
 	 */
 
-	/* Direction, disconnect ok, tag, CDBLen */
-	writel(scsi_flags | 0x20200000 | SCpnt->cmd_len, mptr ++);
+	writel(scsi_flags | SCpnt->cmd_len, mptr++);
 
 	/* Write SCSI command into the message - always 16 byte block */
 	memcpy_toio(mptr, SCpnt->cmnd, 16);
diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c
index 62b0d8b..4031205 100644
--- a/drivers/message/i2o/iop.c
+++ b/drivers/message/i2o/iop.c
@@ -456,6 +456,70 @@ static int i2o_iop_clear(struct i2o_controller *c)
 }
 
 /**
+ *	i2o_iop_init_outbound_queue - setup the outbound message queue
+ *	@c: I2O controller
+ *
+ *	Clear and (re)initialize IOP's outbound queue and post the message
+ *	frames to the IOP.
+ *
+ *	Returns 0 on success or a negative errno code on failure.
+ */
+static int i2o_iop_init_outbound_queue(struct i2o_controller *c)
+{
+	u8 *status = c->status.virt;
+	u32 m;
+	struct i2o_message __iomem *msg;
+	ulong timeout;
+	int i;
+
+	osm_debug("%s: Initializing Outbound Queue...\n", c->name);
+
+	memset(status, 0, 4);
+
+	m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
+	if (m == I2O_QUEUE_EMPTY)
+		return -ETIMEDOUT;
+
+	writel(EIGHT_WORD_MSG_SIZE | TRL_OFFSET_6, &msg->u.head[0]);
+	writel(I2O_CMD_OUTBOUND_INIT << 24 | HOST_TID << 12 | ADAPTER_TID,
+	       &msg->u.head[1]);
+	writel(i2o_exec_driver.context, &msg->u.s.icntxt);
+	writel(0x0106, &msg->u.s.tcntxt);	/* FIXME: why 0x0106, maybe in
+						   Spec? */
+	writel(PAGE_SIZE, &msg->body[0]);
+	/* Outbound msg frame size in words and Initcode */
+	writel(MSG_FRAME_SIZE << 16 | 0x80, &msg->body[1]);
+	writel(0xd0000004, &msg->body[2]);
+	writel(i2o_dma_low(c->status.phys), &msg->body[3]);
+	writel(i2o_dma_high(c->status.phys), &msg->body[4]);
+
+	i2o_msg_post(c, m);
+
+	timeout = jiffies + I2O_TIMEOUT_INIT_OUTBOUND_QUEUE * HZ;
+	while (*status <= I2O_CMD_IN_PROGRESS) {
+		if (time_after(jiffies, timeout)) {
+			osm_warn("%s: Timeout Initializing\n", c->name);
+			return -ETIMEDOUT;
+		}
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(1);
+
+		rmb();
+	}
+
+	m = c->out_queue.phys;
+
+	/* Post frames */
+	for (i = 0; i < NMBR_MSG_FRAMES; i++) {
+		i2o_flush_reply(c, m);
+		udelay(1);	/* Promise */
+		m += MSG_FRAME_SIZE * 4;
+	}
+
+	return 0;
+}
+
+/**
  *	i2o_iop_reset - reset an I2O controller
  *	@c: controller to reset
  *
@@ -491,25 +555,16 @@ static int i2o_iop_reset(struct i2o_controller *c)
 	writel(0, &msg->u.s.tcntxt);	//FIXME: use reasonable transaction context
 	writel(0, &msg->body[0]);
 	writel(0, &msg->body[1]);
-	writel(i2o_ptr_low((void *)c->status.phys), &msg->body[2]);
-	writel(i2o_ptr_high((void *)c->status.phys), &msg->body[3]);
+	writel(i2o_dma_low(c->status.phys), &msg->body[2]);
+	writel(i2o_dma_high(c->status.phys), &msg->body[3]);
 
 	i2o_msg_post(c, m);
 
 	/* Wait for a reply */
 	timeout = jiffies + I2O_TIMEOUT_RESET * HZ;
 	while (!*status) {
-		if (time_after(jiffies, timeout)) {
-			printk(KERN_ERR "%s: IOP reset timeout.\n", c->name);
-			rc = -ETIMEDOUT;
-			goto exit;
-		}
-
-		/* Promise bug */
-		if (status[1] || status[4]) {
-			*status = 0;
+		if (time_after(jiffies, timeout))
 			break;
-		}
 
 		set_current_state(TASK_UNINTERRUPTIBLE);
 		schedule_timeout(1);
@@ -517,14 +572,20 @@ static int i2o_iop_reset(struct i2o_controller *c)
 		rmb();
 	}
 
-	if (*status == I2O_CMD_IN_PROGRESS) {
+	switch (*status) {
+	case I2O_CMD_REJECTED:
+		osm_warn("%s: IOP reset rejected\n", c->name);
+		rc = -EPERM;
+		break;
+
+	case I2O_CMD_IN_PROGRESS:
 		/*
 		 * Once the reset is sent, the IOP goes into the INIT state
-		 * which is indeterminate.  We need to wait until the IOP
-		 * has rebooted before we can let the system talk to
-		 * it. We read the inbound Free_List until a message is
-		 * available. If we can't read one in the given ammount of
-		 * time, we assume the IOP could not reboot properly.
+		 * which is indeterminate. We need to wait until the IOP has
+		 * rebooted before we can let the system talk to it. We read
+		 * the inbound Free_List until a message is available. If we
+		 * can't read one in the given ammount of time, we assume the
+		 * IOP could not reboot properly.
 		 */
 		pr_debug("%s: Reset in progress, waiting for reboot...\n",
 			 c->name);
@@ -543,19 +604,26 @@ static int i2o_iop_reset(struct i2o_controller *c)
 			m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_RESET);
 		}
 		i2o_msg_nop(c, m);
-	}
 
-	/* from here all quiesce commands are safe */
-	c->no_quiesce = 0;
+		/* from here all quiesce commands are safe */
+		c->no_quiesce = 0;
 
-	/* If IopReset was rejected or didn't perform reset, try IopClear */
-	i2o_status_get(c);
-	if (*status == I2O_CMD_REJECTED || sb->iop_state != ADAPTER_STATE_RESET) {
-		printk(KERN_WARNING "%s: Reset rejected, trying to clear\n",
-		       c->name);
-		i2o_iop_clear(c);
-	} else
-		pr_debug("%s: Reset completed.\n", c->name);
+		/* verify if controller is in state RESET */
+		i2o_status_get(c);
+
+		if (!c->promise && (sb->iop_state != ADAPTER_STATE_RESET))
+			osm_warn("%s: reset completed, but adapter not in RESET"
+				 " state.\n", c->name);
+		else
+			osm_debug("%s: reset completed.\n", c->name);
+
+		break;
+
+	default:
+		osm_err("%s: IOP reset timeout.\n", c->name);
+		rc = -ETIMEDOUT;
+		break;
+	}
 
       exit:
 	/* Enable all IOPs */
@@ -565,87 +633,6 @@ static int i2o_iop_reset(struct i2o_controller *c)
 };
 
 /**
- *	i2o_iop_init_outbound_queue - setup the outbound message queue
- *	@c: I2O controller
- *
- *	Clear and (re)initialize IOP's outbound queue and post the message
- *	frames to the IOP.
- *
- *	Returns 0 on success or a negative errno code on failure.
- */
-static int i2o_iop_init_outbound_queue(struct i2o_controller *c)
-{
-	u8 *status = c->status.virt;
-	u32 m;
-	struct i2o_message __iomem *msg;
-	ulong timeout;
-	int i;
-
-	pr_debug("%s: Initializing Outbound Queue...\n", c->name);
-
-	memset(status, 0, 4);
-
-	m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
-	if (m == I2O_QUEUE_EMPTY)
-		return -ETIMEDOUT;
-
-	writel(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_6, &msg->u.head[0]);
-	writel(I2O_CMD_OUTBOUND_INIT << 24 | HOST_TID << 12 | ADAPTER_TID,
-	       &msg->u.head[1]);
-	writel(i2o_exec_driver.context, &msg->u.s.icntxt);
-	writel(0x00000000, &msg->u.s.tcntxt);
-	writel(PAGE_SIZE, &msg->body[0]);
-	writel(MSG_FRAME_SIZE << 16 | 0x80, &msg->body[1]);	/* Outbound msg frame
-								   size in words and Initcode */
-	writel(0xd0000004, &msg->body[2]);
-	writel(i2o_ptr_low((void *)c->status.phys), &msg->body[3]);
-	writel(i2o_ptr_high((void *)c->status.phys), &msg->body[4]);
-
-	i2o_msg_post(c, m);
-
-	timeout = jiffies + I2O_TIMEOUT_INIT_OUTBOUND_QUEUE * HZ;
-	while (*status <= I2O_CMD_IN_PROGRESS) {
-		if (time_after(jiffies, timeout)) {
-			printk(KERN_WARNING "%s: Timeout Initializing\n",
-			       c->name);
-			return -ETIMEDOUT;
-		}
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout(1);
-
-		rmb();
-	}
-
-	m = c->out_queue.phys;
-
-	/* Post frames */
-	for (i = 0; i < NMBR_MSG_FRAMES; i++) {
-		i2o_flush_reply(c, m);
-		udelay(1);	/* Promise */
-		m += MSG_FRAME_SIZE * 4;
-	}
-
-	return 0;
-}
-
-/**
- *	i2o_iop_send_nop - send a core NOP message
- *	@c: controller
- *
- *	Send a no-operation message with a reply set to cause no
- *	action either. Needed for bringing up promise controllers.
- */
-static int i2o_iop_send_nop(struct i2o_controller *c)
-{
-	struct i2o_message __iomem *msg;
-	u32 m = i2o_msg_get_wait(c, &msg, HZ);
-	if (m == I2O_QUEUE_EMPTY)
-		return -ETIMEDOUT;
-	i2o_msg_nop(c, m);
-	return 0;
-}
-
-/**
  *	i2o_iop_activate - Bring controller up to HOLD
  *	@c: controller
  *
@@ -656,26 +643,9 @@ static int i2o_iop_send_nop(struct i2o_controller *c)
  */
 static int i2o_iop_activate(struct i2o_controller *c)
 {
-	struct pci_dev *i960 = NULL;
 	i2o_status_block *sb = c->status_block.virt;
 	int rc;
-
-	if (c->promise) {
-		/* Beat up the hardware first of all */
-		i960 =
-		    pci_find_slot(c->pdev->bus->number,
-				  PCI_DEVFN(PCI_SLOT(c->pdev->devfn), 0));
-		if (i960)
-			pci_write_config_word(i960, 0x42, 0);
-
-		/* Follow this sequence precisely or the controller
-		   ceases to perform useful functions until reboot */
-		if ((rc = i2o_iop_send_nop(c)))
-			return rc;
-
-		if ((rc = i2o_iop_reset(c)))
-			return rc;
-	}
+	int state;
 
 	/* In INIT state, Wait Inbound Q to initialize (in i2o_status_get) */
 	/* In READY state, Get status */
@@ -684,7 +654,8 @@ static int i2o_iop_activate(struct i2o_controller *c)
 	if (rc) {
 		printk(KERN_INFO "%s: Unable to obtain status, "
 		       "attempting a reset.\n", c->name);
-		if (i2o_iop_reset(c))
+		rc = i2o_iop_reset(c);
+		if (rc)
 			return rc;
 	}
 
@@ -697,37 +668,37 @@ static int i2o_iop_activate(struct i2o_controller *c)
 	switch (sb->iop_state) {
 	case ADAPTER_STATE_FAULTED:
 		printk(KERN_CRIT "%s: hardware fault\n", c->name);
-		return -ENODEV;
+		return -EFAULT;
 
 	case ADAPTER_STATE_READY:
 	case ADAPTER_STATE_OPERATIONAL:
 	case ADAPTER_STATE_HOLD:
 	case ADAPTER_STATE_FAILED:
 		pr_debug("%s: already running, trying to reset...\n", c->name);
-		if (i2o_iop_reset(c))
-			return -ENODEV;
+		rc = i2o_iop_reset(c);
+		if (rc)
+			return rc;
 	}
 
+	/* preserve state */
+	state = sb->iop_state;
+
 	rc = i2o_iop_init_outbound_queue(c);
 	if (rc)
 		return rc;
 
-	if (c->promise) {
-		if ((rc = i2o_iop_send_nop(c)))
-			return rc;
+	/* if adapter was not in RESET state clear now */
+	if (state != ADAPTER_STATE_RESET)
+		i2o_iop_clear(c);
 
-		if ((rc = i2o_status_get(c)))
-			return rc;
+	i2o_status_get(c);
 
-		if (i960)
-			pci_write_config_word(i960, 0x42, 0x3FF);
+	if (sb->iop_state != ADAPTER_STATE_HOLD) {
+		osm_err("%s: failed to bring IOP into HOLD state\n", c->name);
+		return -EIO;
 	}
 
-	/* In HOLD state */
-
-	rc = i2o_hrt_get(c);
-
-	return rc;
+	return i2o_hrt_get(c);
 };
 
 /**
@@ -1030,8 +1001,8 @@ int i2o_status_get(struct i2o_controller *c)
 	writel(0, &msg->u.s.tcntxt);	// FIXME: use resonable transaction context
 	writel(0, &msg->body[0]);
 	writel(0, &msg->body[1]);
-	writel(i2o_ptr_low((void *)c->status_block.phys), &msg->body[2]);
-	writel(i2o_ptr_high((void *)c->status_block.phys), &msg->body[3]);
+	writel(i2o_dma_low(c->status_block.phys), &msg->body[2]);
+	writel(i2o_dma_high(c->status_block.phys), &msg->body[3]);
 	writel(sizeof(i2o_status_block), &msg->body[4]);	/* always 88 bytes */
 
 	i2o_msg_post(c, m);
diff --git a/drivers/message/i2o/pci.c b/drivers/message/i2o/pci.c
index f33fd81..a499af0 100644
--- a/drivers/message/i2o/pci.c
+++ b/drivers/message/i2o/pci.c
@@ -50,30 +50,6 @@ static struct pci_device_id __devinitdata i2o_pci_ids[] = {
 };
 
 /**
- *	i2o_dma_realloc - Realloc DMA memory
- *	@dev: struct device pointer to the PCI device of the I2O controller
- *	@addr: pointer to a i2o_dma struct DMA buffer
- *	@len: new length of memory
- *	@gfp_mask: GFP mask
- *
- *	If there was something allocated in the addr, free it first. If len > 0
- *	than try to allocate it and write the addresses back to the addr
- *	structure. If len == 0 set the virtual address to NULL.
- *
- *	Returns the 0 on success or negative error code on failure.
- */
-int i2o_dma_realloc(struct device *dev, struct i2o_dma *addr, size_t len,
-		    unsigned int gfp_mask)
-{
-	i2o_dma_free(dev, addr);
-
-	if (len)
-		return i2o_dma_alloc(dev, addr, len, gfp_mask);
-
-	return 0;
-};
-
-/**
  *	i2o_pci_free - Frees the DMA memory for the I2O controller
  *	@c: I2O controller to free
  *
@@ -185,6 +161,7 @@ static int __devinit i2o_pci_alloc(struct i2o_controller *c)
 	} else
 		c->in_queue = c->base;
 
+	c->irq_status = c->base.virt + I2O_IRQ_STATUS;
 	c->irq_mask = c->base.virt + I2O_IRQ_MASK;
 	c->in_port = c->base.virt + I2O_IN_PORT;
 	c->out_port = c->base.virt + I2O_OUT_PORT;
@@ -232,36 +209,30 @@ static int __devinit i2o_pci_alloc(struct i2o_controller *c)
 static irqreturn_t i2o_pci_interrupt(int irq, void *dev_id, struct pt_regs *r)
 {
 	struct i2o_controller *c = dev_id;
-	struct device *dev = &c->pdev->dev;
-	u32 mv = readl(c->out_port);
-
-	/*
-	 * Old 960 steppings had a bug in the I2O unit that caused
-	 * the queue to appear empty when it wasn't.
-	 */
-	if (mv == I2O_QUEUE_EMPTY) {
-		mv = readl(c->out_port);
-		if (unlikely(mv == I2O_QUEUE_EMPTY))
-			return IRQ_NONE;
-		else
-			pr_debug("%s: 960 bug detected\n", c->name);
-	}
+	u32 m;
+	irqreturn_t rc = IRQ_NONE;
+
+	while (readl(c->irq_status) & I2O_IRQ_OUTBOUND_POST) {
+		m = readl(c->out_port);
+		if (m == I2O_QUEUE_EMPTY) {
+			/*
+			 * Old 960 steppings had a bug in the I2O unit that
+			 * caused the queue to appear empty when it wasn't.
+			 */
+			m = readl(c->out_port);
+			if (unlikely(m == I2O_QUEUE_EMPTY))
+				break;
+		}
 
-	while (mv != I2O_QUEUE_EMPTY) {
 		/* dispatch it */
-		if (i2o_driver_dispatch(c, mv))
+		if (i2o_driver_dispatch(c, m))
 			/* flush it if result != 0 */
-			i2o_flush_reply(c, mv);
+			i2o_flush_reply(c, m);
 
-		/*
-		 * That 960 bug again...
-		 */
-		mv = readl(c->out_port);
-		if (mv == I2O_QUEUE_EMPTY)
-			mv = readl(c->out_port);
+		rc = IRQ_HANDLED;
 	}
 
-	return IRQ_HANDLED;
+	return rc;
 }
 
 /**