Merge tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core framework:
   - Add the MFD bindings doc to MAINTAINERS

  New drivers:
   - X-Powers AC100 Audio CODEC and RTC
   - TI LP873x PMIC
   - Rockchip RK808 PMIC
   - Samsung Exynos Low Power Audio

  New device support:
   - Add support for STMPE1600 variant to stmpe
   - Add support for PM8018 PMIC to pm8921-core
   - Add support for AXP806 PMIC in axp20x
   - Add support for AXP209 GPIO in axp20x

  New functionality:
   - Add support for Reset to all STMPE variants
   - Add support for MKBP event support to cros_ec
   - Add support for USB to intel_soc_pmic_bxtwc
   - Add support for IRQs and Power Button to tps65217

  Fix-ups:
   - Clean-up defunct author emails (da9063, max14577)
   - Kconfig fixups (wm8350-i2c, as37220
   - Constify (altera-a10sr, sm501)
   - Supply PCI IDs (intel-lpss-pci)
   - Improve clocking (qcom_rpm)
   - Fix IRQ probing (ucb1x00-core)
   - Ensure fault log is cleared (da9052)
   - Remove NO_IRQ check (ucb1x00-core)
   - Supply I2C properties (intel-lpss-acpi, intel-lpss-pci)
   - Non standard declaration (tps65217, max8997-irq)
   - Remove unused code (lp873x, db8500-prcmu, ab8500-debugfs,
     cros_ec_spi)
   - Make non-modular (altera-a10sr, intel_msic, smsc-ece1099,
     sun6i-prcm, twl-core)
   - OF bindings (ac100, stmpe, qcom-pm8xxx, qcom-rpm, rk808, axp20x,
     lp873x, exynos5433-lpass, act8945a, aspeed-scu, twl6040, arizona)

  Bugfixes:
   - Release OF pointer (qcom_rpm)
   - Avoid double shifting in suspend/resume (88pm80x)
   - Fix 'defined but not used' error (exynos-lpass)
   - Fix 'sleeping whilst attomic' (atmel-hlcdc)"

* tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
  mfd: arizona: Handle probe deferral for reset GPIO
  mfd: arizona: Remove arizona_of_get_named_gpio helper function
  mfd: arizona: Add DT options for max_channels_clocked and PDM speaker config
  mfd: twl6040: Register child device for twl6040-pdmclk
  mfd: cros_ec_spi: Remove unused variable 'request'
  mfd: omap-usb-host: Return value is not 'const int'
  mfd: ab8500-debugfs: Remove 'weak' function suspend_test_wake_cause_interrupt_is_mine()
  mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem()
  mfd: db8500-prcmu: Remove unused *prcmu_set_ddr_opp() calls
  mfd: ab8500-debugfs: Prevent initialised field from being over-written
  mfd: max8997-irq: 'inline' should be at the beginning of the declaration
  mfd: rk808: Fix RK818_IRQ_DISCHG_ILIM initializer
  mfd: tps65217: Fix nonstandard declaration
  mfd: lp873x: Remove unused mutex lock from struct lp873x
  mfd: atmel-hlcdc: Do not sleep in atomic context
  mfd: exynos-lpass: Mark PM functions as __maybe_unused
  mfd: intel-lpss: Add default I2C device properties for Apollo Lake
  mfd: twl-core: Make it explicitly non-modular
  mfd: sun6i-prcm: Make it explicitly non-modular
  mfd: smsc-ece1099: Make it explicitly non-modular
  ...

1 files changed, 137 insertions, 0 deletions

diff --git a/drivers/mfd/ac100.c b/drivers/mfd/ac100.c
new file mode 100644
index 0000000..9bc69cd
--- /dev/null
+++ b/drivers/mfd/ac100.c
@@ -0,0 +1,137 @@
+/*
+ * MFD core driver for X-Powers' AC100 Audio Codec IC
+ *
+ * The AC100 is a highly integrated audio codec and RTC subsystem designed
+ * for mobile applications. It has 3 I2S/PCM interfaces, a 2 channel DAC,
+ * a 2 channel ADC with 5 inputs and a builtin mixer. The RTC subsystem has
+ * 3 clock outputs.
+ *
+ * The audio codec and RTC parts are completely separate, sharing only the
+ * host interface for access to its registers.
+ *
+ * Copyright (2016) Chen-Yu Tsai
+ *
+ * Author: Chen-Yu Tsai <wens@csie.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/ac100.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/sunxi-rsb.h>
+
+static const struct regmap_range ac100_writeable_ranges[] = {
+	regmap_reg_range(AC100_CHIP_AUDIO_RST, AC100_I2S_SR_CTRL),
+	regmap_reg_range(AC100_I2S1_CLK_CTRL, AC100_I2S1_MXR_GAIN),
+	regmap_reg_range(AC100_I2S2_CLK_CTRL, AC100_I2S2_MXR_GAIN),
+	regmap_reg_range(AC100_I2S3_CLK_CTRL, AC100_I2S3_SIG_PATH_CTRL),
+	regmap_reg_range(AC100_ADC_DIG_CTRL, AC100_ADC_VOL_CTRL),
+	regmap_reg_range(AC100_HMIC_CTRL1, AC100_HMIC_STATUS),
+	regmap_reg_range(AC100_DAC_DIG_CTRL, AC100_DAC_MXR_GAIN),
+	regmap_reg_range(AC100_ADC_APC_CTRL, AC100_LINEOUT_CTRL),
+	regmap_reg_range(AC100_ADC_DAP_L_CTRL, AC100_ADC_DAP_OPT),
+	regmap_reg_range(AC100_DAC_DAP_CTRL, AC100_DAC_DAP_OPT),
+	regmap_reg_range(AC100_ADC_DAP_ENA, AC100_DAC_DAP_ENA),
+	regmap_reg_range(AC100_SRC1_CTRL1, AC100_SRC1_CTRL2),
+	regmap_reg_range(AC100_SRC2_CTRL1, AC100_SRC2_CTRL2),
+	regmap_reg_range(AC100_CLK32K_ANALOG_CTRL, AC100_CLKOUT_CTRL3),
+	regmap_reg_range(AC100_RTC_RST, AC100_RTC_UPD),
+	regmap_reg_range(AC100_ALM_INT_ENA, AC100_ALM_INT_STA),
+	regmap_reg_range(AC100_ALM_SEC, AC100_RTC_GP(15)),
+};
+
+static const struct regmap_range ac100_volatile_ranges[] = {
+	regmap_reg_range(AC100_CHIP_AUDIO_RST, AC100_PLL_CTRL2),
+	regmap_reg_range(AC100_HMIC_STATUS, AC100_HMIC_STATUS),
+	regmap_reg_range(AC100_ADC_DAP_L_STA, AC100_ADC_DAP_L_STA),
+	regmap_reg_range(AC100_SRC1_CTRL1, AC100_SRC1_CTRL1),
+	regmap_reg_range(AC100_SRC1_CTRL3, AC100_SRC2_CTRL1),
+	regmap_reg_range(AC100_SRC2_CTRL3, AC100_SRC2_CTRL4),
+	regmap_reg_range(AC100_RTC_RST, AC100_RTC_RST),
+	regmap_reg_range(AC100_RTC_SEC, AC100_ALM_INT_STA),
+	regmap_reg_range(AC100_ALM_SEC, AC100_ALM_UPD),
+};
+
+static const struct regmap_access_table ac100_writeable_table = {
+	.yes_ranges	= ac100_writeable_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(ac100_writeable_ranges),
+};
+
+static const struct regmap_access_table ac100_volatile_table = {
+	.yes_ranges	= ac100_volatile_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(ac100_volatile_ranges),
+};
+
+static const struct regmap_config ac100_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 16,
+	.wr_table	= &ac100_writeable_table,
+	.volatile_table	= &ac100_volatile_table,
+	.max_register	= AC100_RTC_GP(15),
+	.cache_type	= REGCACHE_RBTREE,
+};
+
+static struct mfd_cell ac100_cells[] = {
+	{
+		.name		= "ac100-codec",
+		.of_compatible	= "x-powers,ac100-codec",
+	}, {
+		.name		= "ac100-rtc",
+		.of_compatible	= "x-powers,ac100-rtc",
+	},
+};
+
+static int ac100_rsb_probe(struct sunxi_rsb_device *rdev)
+{
+	struct ac100_dev *ac100;
+	int ret;
+
+	ac100 = devm_kzalloc(&rdev->dev, sizeof(*ac100), GFP_KERNEL);
+	if (!ac100)
+		return -ENOMEM;
+
+	ac100->dev = &rdev->dev;
+	sunxi_rsb_device_set_drvdata(rdev, ac100);
+
+	ac100->regmap = devm_regmap_init_sunxi_rsb(rdev, &ac100_regmap_config);
+	if (IS_ERR(ac100->regmap)) {
+		ret = PTR_ERR(ac100->regmap);
+		dev_err(ac100->dev, "regmap init failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_mfd_add_devices(ac100->dev, PLATFORM_DEVID_NONE, ac100_cells,
+				   ARRAY_SIZE(ac100_cells), NULL, 0, NULL);
+	if (ret) {
+		dev_err(ac100->dev, "failed to add MFD devices: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id ac100_of_match[] = {
+	{ .compatible = "x-powers,ac100" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ac100_of_match);
+
+static struct sunxi_rsb_driver ac100_rsb_driver = {
+	.driver = {
+		.name	= "ac100",
+		.of_match_table	= of_match_ptr(ac100_of_match),
+	},
+	.probe	= ac100_rsb_probe,
+};
+module_sunxi_rsb_driver(ac100_rsb_driver);
+
+MODULE_DESCRIPTION("Audio codec MFD core driver for AC100");
+MODULE_AUTHOR("Chen-Yu Tsai <wens@csie.org>");
+MODULE_LICENSE("GPL v2");