summaryrefslogtreecommitdiff
path: root/drivers/mmc/card
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-03-29 03:59:45 (GMT)
committerLinus Torvalds <torvalds@linux-foundation.org>2012-03-29 03:59:45 (GMT)
commitb5174fa3a7f4f8f150bfa3b917c92608953dfa0f (patch)
tree5efd32dd52fe55f760094e78f18acd3ff869751d /drivers/mmc/card
parentafb9bd704c7116076879352a2cc2c43aa12c1e14 (diff)
parent135111cc5595c6a24dd826d503e2d2bae92da1c4 (diff)
downloadlinux-b5174fa3a7f4f8f150bfa3b917c92608953dfa0f.tar.xz
Merge tag 'mmc-merge-for-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Pull MMC updates from Chris Ball: Core: * Support for MMC 4.5 Data Tag feature -- we tag REQ_META, so devices that support Data Tag will provide increased throughput for metadata. * Faster detection of card removal on I/O errors. Drivers: * dw_mmc now supports eMMC Power Off Notify, has PCI support, and implements pre_req and post_req for asynchronous requests. * omap_hsmmc now supports device tree. * esdhc now has power management support. * sdhci-tegra now supports Tegra30 devices. * sdhci-spear now supports hibernation. * tmio_mmc now supports using a GPIO for card detection. * Intel PCH now supports 8-bit bus transfers. * tag 'mmc-merge-for-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (53 commits) mmc: sh_mmcif: simplify bitmask macros mmc: sh_mobile_sdhi: support modular mmc-core with non-standard hotplug mmc: sh_mobile_sdhi: add a callback for board specific init code mmc: tmio: cosmetic: prettify the tmio_mmc_set_ios() function mmc: sh_mobile_sdhi: do not manage PM clocks manually mmc: tmio_mmc: remove unused sdio_irq_enabled flag mmc: tmio_mmc: power status flag doesn't have to be exposed in platform data mmc: sh_mobile_sdhi: pass card hotplug GPIO number to TMIO MMC mmc: tmio_mmc: support the generic MMC GPIO card hotplug helper mmc: tmio: calculate the native hotplug condition only once mmc: simplify mmc_cd_gpio_request() by removing two parameters mmc: sdhci-pci: allow 8-bit bus width for Intel PCH mmc: sdhci: check interrupt flags in ISR again mmc: sdhci-pci: Add MSI support mmc: core: warn when card doesn't support HPI mmc: davinci: Poll status for small size transfers mmc: davinci: Eliminate spurious interrupts mmc: omap_hsmmc: Avoid a regulator voltage change with dt mmc: omap_hsmmc: Convert hsmmc driver to use device tree mmc: sdhci-pci: add SDHCI_QUIRK2_HOST_OFF_CARD_ON for Medfield SDIO ...
Diffstat (limited to 'drivers/mmc/card')
-rw-r--r--drivers/mmc/card/block.c21
1 files changed, 16 insertions, 5 deletions
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 4c3b284..eed213a 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1079,6 +1079,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
struct mmc_blk_request *brq = &mqrq->brq;
struct request *req = mqrq->req;
struct mmc_blk_data *md = mq->data;
+ bool do_data_tag;
/*
* Reliable writes are used to implement Forced Unit Access and
@@ -1155,6 +1156,16 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
mmc_apply_rel_rw(brq, card, req);
/*
+ * Data tag is used only during writing meta data to speed
+ * up write and any subsequent read of this meta data
+ */
+ do_data_tag = (card->ext_csd.data_tag_unit_size) &&
+ (req->cmd_flags & REQ_META) &&
+ (rq_data_dir(req) == WRITE) &&
+ ((brq->data.blocks * brq->data.blksz) >=
+ card->ext_csd.data_tag_unit_size);
+
+ /*
* Pre-defined multi-block transfers are preferable to
* open ended-ones (and necessary for reliable writes).
* However, it is not sufficient to just send CMD23,
@@ -1172,13 +1183,13 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
* We'll avoid using CMD23-bounded multiblock writes for
* these, while retaining features like reliable writes.
*/
-
- if ((md->flags & MMC_BLK_CMD23) &&
- mmc_op_multi(brq->cmd.opcode) &&
- (do_rel_wr || !(card->quirks & MMC_QUIRK_BLK_NO_CMD23))) {
+ if ((md->flags & MMC_BLK_CMD23) && mmc_op_multi(brq->cmd.opcode) &&
+ (do_rel_wr || !(card->quirks & MMC_QUIRK_BLK_NO_CMD23) ||
+ do_data_tag)) {
brq->sbc.opcode = MMC_SET_BLOCK_COUNT;
brq->sbc.arg = brq->data.blocks |
- (do_rel_wr ? (1 << 31) : 0);
+ (do_rel_wr ? (1 << 31) : 0) |
+ (do_data_tag ? (1 << 29) : 0);
brq->sbc.flags = MMC_RSP_R1 | MMC_CMD_AC;
brq->mrq.sbc = &brq->sbc;
}