mmc: Convert pr_warning to pr_warn

Use the much more common pr_warn instead of pr_warning.

Other miscellanea:

o Coalesce formats
o Realign arguments
o Remove extra spaces when coalescing formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

4 files changed, 26 insertions, 36 deletions

diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index e4e1a53..94cddf3 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -985,7 +985,8 @@ static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data)
 		 * one block being transferred. */
 
 		if (data->blocks > 1) {
-			pr_warning("%s: can't do non-word sized block transfers (blksz %d)\n", __func__, data->blksz);
+			pr_warn("%s: can't do non-word sized block transfers (blksz %d)\n",
+				__func__, data->blksz);
 			return -EINVAL;
 		}
 	}
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 7481bd8..db113ab 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1754,8 +1754,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 			ret = regulator_set_voltage(mmc->supply.vqmmc, 2700000,
 						    3600000);
 			if (ret) {
-				pr_warning("%s: Switching to 3.3V signalling voltage "
-						" failed\n", mmc_hostname(mmc));
+				pr_warn("%s: Switching to 3.3V signalling voltage failed\n",
+					mmc_hostname(mmc));
 				return -EIO;
 			}
 		}
@@ -1767,8 +1767,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 		if (!(ctrl & SDHCI_CTRL_VDD_180))
 			return 0;
 
-		pr_warning("%s: 3.3V regulator output did not became stable\n",
-				mmc_hostname(mmc));
+		pr_warn("%s: 3.3V regulator output did not became stable\n",
+			mmc_hostname(mmc));
 
 		return -EAGAIN;
 	case MMC_SIGNAL_VOLTAGE_180:
@@ -1776,8 +1776,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 			ret = regulator_set_voltage(mmc->supply.vqmmc,
 					1700000, 1950000);
 			if (ret) {
-				pr_warning("%s: Switching to 1.8V signalling voltage "
-						" failed\n", mmc_hostname(mmc));
+				pr_warn("%s: Switching to 1.8V signalling voltage failed\n",
+					mmc_hostname(mmc));
 				return -EIO;
 			}
 		}
@@ -1794,8 +1794,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 		if (ctrl & SDHCI_CTRL_VDD_180)
 			return 0;
 
-		pr_warning("%s: 1.8V regulator output did not became stable\n",
-				mmc_hostname(mmc));
+		pr_warn("%s: 1.8V regulator output did not became stable\n",
+			mmc_hostname(mmc));
 
 		return -EAGAIN;
 	case MMC_SIGNAL_VOLTAGE_120:
@@ -1803,8 +1803,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 			ret = regulator_set_voltage(mmc->supply.vqmmc, 1100000,
 						    1300000);
 			if (ret) {
-				pr_warning("%s: Switching to 1.2V signalling voltage "
-						" failed\n", mmc_hostname(mmc));
+				pr_warn("%s: Switching to 1.2V signalling voltage failed\n",
+					mmc_hostname(mmc));
 				return -EIO;
 			}
 		}
@@ -2844,8 +2844,7 @@ int sdhci_add_host(struct sdhci_host *host)
 	if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
 		if (host->ops->enable_dma) {
 			if (host->ops->enable_dma(host)) {
-				pr_warning("%s: No suitable DMA "
-					"available. Falling back to PIO.\n",
+				pr_warn("%s: No suitable DMA available - falling back to PIO\n",
 					mmc_hostname(mmc));
 				host->flags &=
 					~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
@@ -2867,15 +2866,14 @@ int sdhci_add_host(struct sdhci_host *host)
 			dma_free_coherent(mmc_dev(mmc), ADMA_SIZE,
 					  host->adma_desc, host->adma_addr);
 			kfree(host->align_buffer);
-			pr_warning("%s: Unable to allocate ADMA "
-				"buffers. Falling back to standard DMA.\n",
+			pr_warn("%s: Unable to allocate ADMA buffers - falling back to standard DMA\n",
 				mmc_hostname(mmc));
 			host->flags &= ~SDHCI_USE_ADMA;
 			host->adma_desc = NULL;
 			host->align_buffer = NULL;
 		} else if (host->adma_addr & 3) {
-			pr_warning("%s: unable to allocate aligned ADMA descriptor\n",
-				   mmc_hostname(mmc));
+			pr_warn("%s: unable to allocate aligned ADMA descriptor\n",
+				mmc_hostname(mmc));
 			host->flags &= ~SDHCI_USE_ADMA;
 			dma_free_coherent(mmc_dev(mmc), ADMA_SIZE,
 					  host->adma_desc, host->adma_addr);
@@ -3202,8 +3200,8 @@ int sdhci_add_host(struct sdhci_host *host)
 		mmc->max_blk_size = (caps[0] & SDHCI_MAX_BLOCK_MASK) >>
 				SDHCI_MAX_BLOCK_SHIFT;
 		if (mmc->max_blk_size >= 3) {
-			pr_warning("%s: Invalid maximum block size, "
-				"assuming 512 bytes\n", mmc_hostname(mmc));
+			pr_warn("%s: Invalid maximum block size, assuming 512 bytes\n",
+				mmc_hostname(mmc));
 			mmc->max_blk_size = 0;
 		}
 	}
diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c
index d1760eb..93c4b40 100644
--- a/drivers/mmc/host/tifm_sd.c
+++ b/drivers/mmc/host/tifm_sd.c
@@ -952,8 +952,8 @@ static int tifm_sd_probe(struct tifm_dev *sock)
 
 	if (!(TIFM_SOCK_STATE_OCCUPIED
 	      & readl(sock->addr + SOCK_PRESENT_STATE))) {
-		pr_warning("%s : card gone, unexpectedly\n",
-		       dev_name(&sock->dev));
+		pr_warn("%s : card gone, unexpectedly\n",
+			dev_name(&sock->dev));
 		return rc;
 	}
 
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index 1defd5e..9a6dfb0 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -803,8 +803,7 @@ static void wbsd_request(struct mmc_host *mmc, struct mmc_request *mrq)
 
 		default:
 #ifdef CONFIG_MMC_DEBUG
-			pr_warning("%s: Data command %d is not "
-				"supported by this controller.\n",
+			pr_warn("%s: Data command %d is not supported by this controller\n",
 				mmc_hostname(host->mmc), cmd->opcode);
 #endif
 			cmd->error = -EINVAL;
@@ -1429,8 +1428,8 @@ free:
 	free_dma(dma);
 
 err:
-	pr_warning(DRIVER_NAME ": Unable to allocate DMA %d. "
-		"Falling back on FIFO.\n", dma);
+	pr_warn(DRIVER_NAME ": Unable to allocate DMA %d - falling back on FIFO\n",
+		dma);
 }
 
 static void wbsd_release_dma(struct wbsd_host *host)
@@ -1664,9 +1663,7 @@ static int wbsd_init(struct device *dev, int base, int irq, int dma,
 	ret = wbsd_scan(host);
 	if (ret) {
 		if (pnp && (ret == -ENODEV)) {
-			pr_warning(DRIVER_NAME
-				": Unable to confirm device presence. You may "
-				"experience lock-ups.\n");
+			pr_warn(DRIVER_NAME ": Unable to confirm device presence - you may experience lock-ups\n");
 		} else {
 			wbsd_free_mmc(dev);
 			return ret;
@@ -1688,10 +1685,7 @@ static int wbsd_init(struct device *dev, int base, int irq, int dma,
 	 */
 	if (pnp) {
 		if ((host->config != 0) && !wbsd_chip_validate(host)) {
-			pr_warning(DRIVER_NAME
-				": PnP active but chip not configured! "
-				"You probably have a buggy BIOS. "
-				"Configuring chip manually.\n");
+			pr_warn(DRIVER_NAME ": PnP active but chip not configured! You probably have a buggy BIOS. Configuring chip manually.\n");
 			wbsd_chip_config(host);
 		}
 	} else
@@ -1884,10 +1878,7 @@ static int wbsd_pnp_resume(struct pnp_dev *pnp_dev)
 	 */
 	if (host->config != 0) {
 		if (!wbsd_chip_validate(host)) {
-			pr_warning(DRIVER_NAME
-				": PnP active but chip not configured! "
-				"You probably have a buggy BIOS. "
-				"Configuring chip manually.\n");
+			pr_warn(DRIVER_NAME ": PnP active but chip not configured! You probably have a buggy BIOS. Configuring chip manually.\n");
 			wbsd_chip_config(host);
 		}
 	}