diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/mtd/devices/docprobe.c | |
download | linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/mtd/devices/docprobe.c')
-rw-r--r-- | drivers/mtd/devices/docprobe.c | 355 |
1 files changed, 355 insertions, 0 deletions
diff --git a/drivers/mtd/devices/docprobe.c b/drivers/mtd/devices/docprobe.c new file mode 100644 index 0000000..197d670 --- /dev/null +++ b/drivers/mtd/devices/docprobe.c @@ -0,0 +1,355 @@ + +/* Linux driver for Disk-On-Chip devices */ +/* Probe routines common to all DoC devices */ +/* (C) 1999 Machine Vision Holdings, Inc. */ +/* (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> */ + +/* $Id: docprobe.c,v 1.44 2005/01/05 12:40:36 dwmw2 Exp $ */ + + + +/* DOC_PASSIVE_PROBE: + In order to ensure that the BIOS checksum is correct at boot time, and + hence that the onboard BIOS extension gets executed, the DiskOnChip + goes into reset mode when it is read sequentially: all registers + return 0xff until the chip is woken up again by writing to the + DOCControl register. + + Unfortunately, this means that the probe for the DiskOnChip is unsafe, + because one of the first things it does is write to where it thinks + the DOCControl register should be - which may well be shared memory + for another device. I've had machines which lock up when this is + attempted. Hence the possibility to do a passive probe, which will fail + to detect a chip in reset mode, but is at least guaranteed not to lock + the machine. + + If you have this problem, uncomment the following line: +#define DOC_PASSIVE_PROBE +*/ + + +/* DOC_SINGLE_DRIVER: + Millennium driver has been merged into DOC2000 driver. + + The old Millennium-only driver has been retained just in case there + are problems with the new code. If the combined driver doesn't work + for you, you can try the old one by undefining DOC_SINGLE_DRIVER + below and also enabling it in your configuration. If this fixes the + problems, please send a report to the MTD mailing list at + <linux-mtd@lists.infradead.org>. +*/ +#define DOC_SINGLE_DRIVER + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/types.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/doc2000.h> +#include <linux/mtd/compatmac.h> + +/* Where to look for the devices? */ +#ifndef CONFIG_MTD_DOCPROBE_ADDRESS +#define CONFIG_MTD_DOCPROBE_ADDRESS 0 +#endif + + +static unsigned long doc_config_location = CONFIG_MTD_DOCPROBE_ADDRESS; +module_param(doc_config_location, ulong, 0); +MODULE_PARM_DESC(doc_config_location, "Physical memory address at which to probe for DiskOnChip"); + +static unsigned long __initdata doc_locations[] = { +#if defined (__alpha__) || defined(__i386__) || defined(__x86_64__) +#ifdef CONFIG_MTD_DOCPROBE_HIGH + 0xfffc8000, 0xfffca000, 0xfffcc000, 0xfffce000, + 0xfffd0000, 0xfffd2000, 0xfffd4000, 0xfffd6000, + 0xfffd8000, 0xfffda000, 0xfffdc000, 0xfffde000, + 0xfffe0000, 0xfffe2000, 0xfffe4000, 0xfffe6000, + 0xfffe8000, 0xfffea000, 0xfffec000, 0xfffee000, +#else /* CONFIG_MTD_DOCPROBE_HIGH */ + 0xc8000, 0xca000, 0xcc000, 0xce000, + 0xd0000, 0xd2000, 0xd4000, 0xd6000, + 0xd8000, 0xda000, 0xdc000, 0xde000, + 0xe0000, 0xe2000, 0xe4000, 0xe6000, + 0xe8000, 0xea000, 0xec000, 0xee000, +#endif /* CONFIG_MTD_DOCPROBE_HIGH */ +#elif defined(__PPC__) + 0xe4000000, +#elif defined(CONFIG_MOMENCO_OCELOT) + 0x2f000000, + 0xff000000, +#elif defined(CONFIG_MOMENCO_OCELOT_G) || defined (CONFIG_MOMENCO_OCELOT_C) + 0xff000000, +##else +#warning Unknown architecture for DiskOnChip. No default probe locations defined +#endif + 0xffffffff }; + +/* doccheck: Probe a given memory window to see if there's a DiskOnChip present */ + +static inline int __init doccheck(void __iomem *potential, unsigned long physadr) +{ + void __iomem *window=potential; + unsigned char tmp, tmpb, tmpc, ChipID; +#ifndef DOC_PASSIVE_PROBE + unsigned char tmp2; +#endif + + /* Routine copied from the Linux DOC driver */ + +#ifdef CONFIG_MTD_DOCPROBE_55AA + /* Check for 0x55 0xAA signature at beginning of window, + this is no longer true once we remove the IPL (for Millennium */ + if (ReadDOC(window, Sig1) != 0x55 || ReadDOC(window, Sig2) != 0xaa) + return 0; +#endif /* CONFIG_MTD_DOCPROBE_55AA */ + +#ifndef DOC_PASSIVE_PROBE + /* It's not possible to cleanly detect the DiskOnChip - the + * bootup procedure will put the device into reset mode, and + * it's not possible to talk to it without actually writing + * to the DOCControl register. So we store the current contents + * of the DOCControl register's location, in case we later decide + * that it's not a DiskOnChip, and want to put it back how we + * found it. + */ + tmp2 = ReadDOC(window, DOCControl); + + /* Reset the DiskOnChip ASIC */ + WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, + window, DOCControl); + WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, + window, DOCControl); + + /* Enable the DiskOnChip ASIC */ + WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, + window, DOCControl); + WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, + window, DOCControl); +#endif /* !DOC_PASSIVE_PROBE */ + + /* We need to read the ChipID register four times. For some + newer DiskOnChip 2000 units, the first three reads will + return the DiskOnChip Millennium ident. Don't ask. */ + ChipID = ReadDOC(window, ChipID); + + switch (ChipID) { + case DOC_ChipID_Doc2k: + /* Check the TOGGLE bit in the ECC register */ + tmp = ReadDOC(window, 2k_ECCStatus) & DOC_TOGGLE_BIT; + tmpb = ReadDOC(window, 2k_ECCStatus) & DOC_TOGGLE_BIT; + tmpc = ReadDOC(window, 2k_ECCStatus) & DOC_TOGGLE_BIT; + if (tmp != tmpb && tmp == tmpc) + return ChipID; + break; + + case DOC_ChipID_DocMil: + /* Check for the new 2000 with Millennium ASIC */ + ReadDOC(window, ChipID); + ReadDOC(window, ChipID); + if (ReadDOC(window, ChipID) != DOC_ChipID_DocMil) + ChipID = DOC_ChipID_Doc2kTSOP; + + /* Check the TOGGLE bit in the ECC register */ + tmp = ReadDOC(window, ECCConf) & DOC_TOGGLE_BIT; + tmpb = ReadDOC(window, ECCConf) & DOC_TOGGLE_BIT; + tmpc = ReadDOC(window, ECCConf) & DOC_TOGGLE_BIT; + if (tmp != tmpb && tmp == tmpc) + return ChipID; + break; + + case DOC_ChipID_DocMilPlus16: + case DOC_ChipID_DocMilPlus32: + case 0: + /* Possible Millennium+, need to do more checks */ +#ifndef DOC_PASSIVE_PROBE + /* Possibly release from power down mode */ + for (tmp = 0; (tmp < 4); tmp++) + ReadDOC(window, Mplus_Power); + + /* Reset the DiskOnChip ASIC */ + tmp = DOC_MODE_RESET | DOC_MODE_MDWREN | DOC_MODE_RST_LAT | + DOC_MODE_BDECT; + WriteDOC(tmp, window, Mplus_DOCControl); + WriteDOC(~tmp, window, Mplus_CtrlConfirm); + + mdelay(1); + /* Enable the DiskOnChip ASIC */ + tmp = DOC_MODE_NORMAL | DOC_MODE_MDWREN | DOC_MODE_RST_LAT | + DOC_MODE_BDECT; + WriteDOC(tmp, window, Mplus_DOCControl); + WriteDOC(~tmp, window, Mplus_CtrlConfirm); + mdelay(1); +#endif /* !DOC_PASSIVE_PROBE */ + + ChipID = ReadDOC(window, ChipID); + + switch (ChipID) { + case DOC_ChipID_DocMilPlus16: + case DOC_ChipID_DocMilPlus32: + /* Check the TOGGLE bit in the toggle register */ + tmp = ReadDOC(window, Mplus_Toggle) & DOC_TOGGLE_BIT; + tmpb = ReadDOC(window, Mplus_Toggle) & DOC_TOGGLE_BIT; + tmpc = ReadDOC(window, Mplus_Toggle) & DOC_TOGGLE_BIT; + if (tmp != tmpb && tmp == tmpc) + return ChipID; + default: + break; + } + /* FALL TRHU */ + + default: + +#ifdef CONFIG_MTD_DOCPROBE_55AA + printk(KERN_DEBUG "Possible DiskOnChip with unknown ChipID %2.2X found at 0x%lx\n", + ChipID, physadr); +#endif +#ifndef DOC_PASSIVE_PROBE + /* Put back the contents of the DOCControl register, in case it's not + * actually a DiskOnChip. + */ + WriteDOC(tmp2, window, DOCControl); +#endif + return 0; + } + + printk(KERN_WARNING "DiskOnChip failed TOGGLE test, dropping.\n"); + +#ifndef DOC_PASSIVE_PROBE + /* Put back the contents of the DOCControl register: it's not a DiskOnChip */ + WriteDOC(tmp2, window, DOCControl); +#endif + return 0; +} + +static int docfound; + +static void __init DoC_Probe(unsigned long physadr) +{ + void __iomem *docptr; + struct DiskOnChip *this; + struct mtd_info *mtd; + int ChipID; + char namebuf[15]; + char *name = namebuf; + char *im_funcname = NULL; + char *im_modname = NULL; + void (*initroutine)(struct mtd_info *) = NULL; + + docptr = ioremap(physadr, DOC_IOREMAP_LEN); + + if (!docptr) + return; + + if ((ChipID = doccheck(docptr, physadr))) { + if (ChipID == DOC_ChipID_Doc2kTSOP) { + /* Remove this at your own peril. The hardware driver works but nothing prevents you from erasing bad blocks */ + printk(KERN_NOTICE "Refusing to drive DiskOnChip 2000 TSOP until Bad Block Table is correctly supported by INFTL\n"); + iounmap(docptr); + return; + } + docfound = 1; + mtd = kmalloc(sizeof(struct DiskOnChip) + sizeof(struct mtd_info), GFP_KERNEL); + + if (!mtd) { + printk(KERN_WARNING "Cannot allocate memory for data structures. Dropping.\n"); + iounmap(docptr); + return; + } + + this = (struct DiskOnChip *)(&mtd[1]); + + memset((char *)mtd,0, sizeof(struct mtd_info)); + memset((char *)this, 0, sizeof(struct DiskOnChip)); + + mtd->priv = this; + this->virtadr = docptr; + this->physadr = physadr; + this->ChipID = ChipID; + sprintf(namebuf, "with ChipID %2.2X", ChipID); + + switch(ChipID) { + case DOC_ChipID_Doc2kTSOP: + name="2000 TSOP"; + im_funcname = "DoC2k_init"; + im_modname = "doc2000"; + break; + + case DOC_ChipID_Doc2k: + name="2000"; + im_funcname = "DoC2k_init"; + im_modname = "doc2000"; + break; + + case DOC_ChipID_DocMil: + name="Millennium"; +#ifdef DOC_SINGLE_DRIVER + im_funcname = "DoC2k_init"; + im_modname = "doc2000"; +#else + im_funcname = "DoCMil_init"; + im_modname = "doc2001"; +#endif /* DOC_SINGLE_DRIVER */ + break; + + case DOC_ChipID_DocMilPlus16: + case DOC_ChipID_DocMilPlus32: + name="MillenniumPlus"; + im_funcname = "DoCMilPlus_init"; + im_modname = "doc2001plus"; + break; + } + + if (im_funcname) + initroutine = inter_module_get_request(im_funcname, im_modname); + + if (initroutine) { + (*initroutine)(mtd); + inter_module_put(im_funcname); + return; + } + printk(KERN_NOTICE "Cannot find driver for DiskOnChip %s at 0x%lX\n", name, physadr); + kfree(mtd); + } + iounmap(docptr); +} + + +/**************************************************************************** + * + * Module stuff + * + ****************************************************************************/ + +static int __init init_doc(void) +{ + int i; + + if (doc_config_location) { + printk(KERN_INFO "Using configured DiskOnChip probe address 0x%lx\n", doc_config_location); + DoC_Probe(doc_config_location); + } else { + for (i=0; (doc_locations[i] != 0xffffffff); i++) { + DoC_Probe(doc_locations[i]); + } + } + /* No banner message any more. Print a message if no DiskOnChip + found, so the user knows we at least tried. */ + if (!docfound) + printk(KERN_INFO "No recognised DiskOnChip devices found\n"); + return -EAGAIN; +} + +module_init(init_doc); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>"); +MODULE_DESCRIPTION("Probe code for DiskOnChip 2000 and Millennium devices"); + |