diff options
author | Artem Bityutskiy <artem.bityutskiy@linux.intel.com> | 2013-03-06 07:23:47 (GMT) |
---|---|---|
committer | David Woodhouse <David.Woodhouse@intel.com> | 2013-04-05 11:04:31 (GMT) |
commit | b5a6c3095f0b8c69b1e5c4bacb7ee13069f2688d (patch) | |
tree | 67ef7bb97acc4a3f6fe92018e724bdecf7b9e5b7 /drivers/mtd/devices | |
parent | 8e12b474f9a2349bcaebda65bdc38e8398ff408e (diff) | |
download | linux-b5a6c3095f0b8c69b1e5c4bacb7ee13069f2688d.tar.xz |
mtd: doc: remove support for DoC 2000/2001/2001+
These drivers are deprecated for very long time, and we have a different driver
for these called "diskonchip". Thus, kill the ancient cruft.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Diffstat (limited to 'drivers/mtd/devices')
-rw-r--r-- | drivers/mtd/devices/Kconfig | 63 | ||||
-rw-r--r-- | drivers/mtd/devices/Makefile | 5 | ||||
-rw-r--r-- | drivers/mtd/devices/doc2000.c | 1178 | ||||
-rw-r--r-- | drivers/mtd/devices/doc2001.c | 824 | ||||
-rw-r--r-- | drivers/mtd/devices/doc2001plus.c | 1080 | ||||
-rw-r--r-- | drivers/mtd/devices/docecc.c | 521 | ||||
-rw-r--r-- | drivers/mtd/devices/docprobe.c | 325 |
7 files changed, 0 insertions, 3996 deletions
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 12311f5..ec4a2cc 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -205,69 +205,6 @@ config MTD_BLOCK2MTD comment "Disk-On-Chip Device Drivers" -config MTD_DOC2000 - tristate "M-Systems Disk-On-Chip 2000 and Millennium (DEPRECATED)" - depends on MTD_NAND - select MTD_DOCPROBE - select MTD_NAND_IDS - ---help--- - This provides an MTD device driver for the M-Systems DiskOnChip - 2000 and Millennium devices. Originally designed for the DiskOnChip - 2000, it also now includes support for the DiskOnChip Millennium. - If you have problems with this driver and the DiskOnChip Millennium, - you may wish to try the alternative Millennium driver below. To use - the alternative driver, you will need to undefine DOC_SINGLE_DRIVER - in the <file:drivers/mtd/devices/docprobe.c> source code. - - If you use this device, you probably also want to enable the NFTL - 'NAND Flash Translation Layer' option below, which is used to - emulate a block device by using a kind of file system on the flash - chips. - - NOTE: This driver is deprecated and will probably be removed soon. - Please try the new DiskOnChip driver under "NAND Flash Device - Drivers". - -config MTD_DOC2001 - tristate "M-Systems Disk-On-Chip Millennium-only alternative driver (DEPRECATED)" - depends on MTD_NAND - select MTD_DOCPROBE - select MTD_NAND_IDS - ---help--- - This provides an alternative MTD device driver for the M-Systems - DiskOnChip Millennium devices. Use this if you have problems with - the combined DiskOnChip 2000 and Millennium driver above. To get - the DiskOnChip probe code to load and use this driver instead of - the other one, you will need to undefine DOC_SINGLE_DRIVER near - the beginning of <file:drivers/mtd/devices/docprobe.c>. - - If you use this device, you probably also want to enable the NFTL - 'NAND Flash Translation Layer' option below, which is used to - emulate a block device by using a kind of file system on the flash - chips. - - NOTE: This driver is deprecated and will probably be removed soon. - Please try the new DiskOnChip driver under "NAND Flash Device - Drivers". - -config MTD_DOC2001PLUS - tristate "M-Systems Disk-On-Chip Millennium Plus" - depends on MTD_NAND - select MTD_DOCPROBE - select MTD_NAND_IDS - ---help--- - This provides an MTD device driver for the M-Systems DiskOnChip - Millennium Plus devices. - - If you use this device, you probably also want to enable the INFTL - 'Inverse NAND Flash Translation Layer' option below, which is used - to emulate a block device by using a kind of file system on the - flash chips. - - NOTE: This driver will soon be replaced by the new DiskOnChip driver - under "NAND Flash Device Drivers" (currently that driver does not - support all Millennium Plus devices). - config MTD_DOCG3 tristate "M-Systems Disk-On-Chip G3" select BCH diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile index 369a194..d83bd73 100644 --- a/drivers/mtd/devices/Makefile +++ b/drivers/mtd/devices/Makefile @@ -2,12 +2,7 @@ # linux/drivers/mtd/devices/Makefile # -obj-$(CONFIG_MTD_DOC2000) += doc2000.o -obj-$(CONFIG_MTD_DOC2001) += doc2001.o -obj-$(CONFIG_MTD_DOC2001PLUS) += doc2001plus.o obj-$(CONFIG_MTD_DOCG3) += docg3.o -obj-$(CONFIG_MTD_DOCPROBE) += docprobe.o -obj-$(CONFIG_MTD_DOCECC) += docecc.o obj-$(CONFIG_MTD_SLRAM) += slram.o obj-$(CONFIG_MTD_PHRAM) += phram.o obj-$(CONFIG_MTD_PMC551) += pmc551.o diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c deleted file mode 100644 index 363ec3c..0000000 --- a/drivers/mtd/devices/doc2000.c +++ /dev/null @@ -1,1178 +0,0 @@ - -/* - * Linux driver for Disk-On-Chip 2000 and Millennium - * (c) 1999 Machine Vision Holdings, Inc. - * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org> - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <asm/errno.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <linux/delay.h> -#include <linux/slab.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/bitops.h> -#include <linux/mutex.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/doc2000.h> - -#define DOC_SUPPORT_2000 -#define DOC_SUPPORT_2000TSOP -#define DOC_SUPPORT_MILLENNIUM - -#ifdef DOC_SUPPORT_2000 -#define DoC_is_2000(doc) (doc->ChipID == DOC_ChipID_Doc2k) -#else -#define DoC_is_2000(doc) (0) -#endif - -#if defined(DOC_SUPPORT_2000TSOP) || defined(DOC_SUPPORT_MILLENNIUM) -#define DoC_is_Millennium(doc) (doc->ChipID == DOC_ChipID_DocMil) -#else -#define DoC_is_Millennium(doc) (0) -#endif - -/* #define ECC_DEBUG */ - -/* I have no idea why some DoC chips can not use memcpy_from|to_io(). - * This may be due to the different revisions of the ASIC controller built-in or - * simplily a QA/Bug issue. Who knows ?? If you have trouble, please uncomment - * this: - #undef USE_MEMCPY -*/ - -static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf); -static int doc_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf); -static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, - struct mtd_oob_ops *ops); -static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, - struct mtd_oob_ops *ops); -static int doc_write_oob_nolock(struct mtd_info *mtd, loff_t ofs, size_t len, - size_t *retlen, const u_char *buf); -static int doc_erase (struct mtd_info *mtd, struct erase_info *instr); - -static struct mtd_info *doc2klist = NULL; - -/* Perform the required delay cycles by reading from the appropriate register */ -static void DoC_Delay(struct DiskOnChip *doc, unsigned short cycles) -{ - volatile char dummy; - int i; - - for (i = 0; i < cycles; i++) { - if (DoC_is_Millennium(doc)) - dummy = ReadDOC(doc->virtadr, NOP); - else - dummy = ReadDOC(doc->virtadr, DOCStatus); - } - -} - -/* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */ -static int _DoC_WaitReady(struct DiskOnChip *doc) -{ - void __iomem *docptr = doc->virtadr; - unsigned long timeo = jiffies + (HZ * 10); - - pr_debug("_DoC_WaitReady called for out-of-line wait\n"); - - /* Out-of-line routine to wait for chip response */ - while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) { - /* issue 2 read from NOP register after reading from CDSNControl register - see Software Requirement 11.4 item 2. */ - DoC_Delay(doc, 2); - - if (time_after(jiffies, timeo)) { - pr_debug("_DoC_WaitReady timed out.\n"); - return -EIO; - } - udelay(1); - cond_resched(); - } - - return 0; -} - -static inline int DoC_WaitReady(struct DiskOnChip *doc) -{ - void __iomem *docptr = doc->virtadr; - - /* This is inline, to optimise the common case, where it's ready instantly */ - int ret = 0; - - /* 4 read form NOP register should be issued in prior to the read from CDSNControl - see Software Requirement 11.4 item 2. */ - DoC_Delay(doc, 4); - - if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) - /* Call the out-of-line routine to wait */ - ret = _DoC_WaitReady(doc); - - /* issue 2 read from NOP register after reading from CDSNControl register - see Software Requirement 11.4 item 2. */ - DoC_Delay(doc, 2); - - return ret; -} - -/* DoC_Command: Send a flash command to the flash chip through the CDSN Slow IO register to - bypass the internal pipeline. Each of 4 delay cycles (read from the NOP register) is - required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */ - -static int DoC_Command(struct DiskOnChip *doc, unsigned char command, - unsigned char xtraflags) -{ - void __iomem *docptr = doc->virtadr; - - if (DoC_is_2000(doc)) - xtraflags |= CDSN_CTRL_FLASH_IO; - - /* Assert the CLE (Command Latch Enable) line to the flash chip */ - WriteDOC(xtraflags | CDSN_CTRL_CLE | CDSN_CTRL_CE, docptr, CDSNControl); - DoC_Delay(doc, 4); /* Software requirement 11.4.3 for Millennium */ - - if (DoC_is_Millennium(doc)) - WriteDOC(command, docptr, CDSNSlowIO); - - /* Send the command */ - WriteDOC_(command, docptr, doc->ioreg); - if (DoC_is_Millennium(doc)) - WriteDOC(command, docptr, WritePipeTerm); - - /* Lower the CLE line */ - WriteDOC(xtraflags | CDSN_CTRL_CE, docptr, CDSNControl); - DoC_Delay(doc, 4); /* Software requirement 11.4.3 for Millennium */ - - /* Wait for the chip to respond - Software requirement 11.4.1 (extended for any command) */ - return DoC_WaitReady(doc); -} - -/* DoC_Address: Set the current address for the flash chip through the CDSN Slow IO register to - bypass the internal pipeline. Each of 4 delay cycles (read from the NOP register) is - required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */ - -static int DoC_Address(struct DiskOnChip *doc, int numbytes, unsigned long ofs, - unsigned char xtraflags1, unsigned char xtraflags2) -{ - int i; - void __iomem *docptr = doc->virtadr; - - if (DoC_is_2000(doc)) - xtraflags1 |= CDSN_CTRL_FLASH_IO; - - /* Assert the ALE (Address Latch Enable) line to the flash chip */ - WriteDOC(xtraflags1 | CDSN_CTRL_ALE | CDSN_CTRL_CE, docptr, CDSNControl); - - DoC_Delay(doc, 4); /* Software requirement 11.4.3 for Millennium */ - - /* Send the address */ - /* Devices with 256-byte page are addressed as: - Column (bits 0-7), Page (bits 8-15, 16-23, 24-31) - * there is no device on the market with page256 - and more than 24 bits. - Devices with 512-byte page are addressed as: - Column (bits 0-7), Page (bits 9-16, 17-24, 25-31) - * 25-31 is sent only if the chip support it. - * bit 8 changes the read command to be sent - (NAND_CMD_READ0 or NAND_CMD_READ1). - */ - - if (numbytes == ADDR_COLUMN || numbytes == ADDR_COLUMN_PAGE) { - if (DoC_is_Millennium(doc)) - WriteDOC(ofs & 0xff, docptr, CDSNSlowIO); - WriteDOC_(ofs & 0xff, docptr, doc->ioreg); - } - - if (doc->page256) { - ofs = ofs >> 8; - } else { - ofs = ofs >> 9; - } - - if (numbytes == ADDR_PAGE || numbytes == ADDR_COLUMN_PAGE) { - for (i = 0; i < doc->pageadrlen; i++, ofs = ofs >> 8) { - if (DoC_is_Millennium(doc)) - WriteDOC(ofs & 0xff, docptr, CDSNSlowIO); - WriteDOC_(ofs & 0xff, docptr, doc->ioreg); - } - } - - if (DoC_is_Millennium(doc)) - WriteDOC(ofs & 0xff, docptr, WritePipeTerm); - - DoC_Delay(doc, 2); /* Needed for some slow flash chips. mf. */ - - /* FIXME: The SlowIO's for millennium could be replaced by - a single WritePipeTerm here. mf. */ - - /* Lower the ALE line */ - WriteDOC(xtraflags1 | xtraflags2 | CDSN_CTRL_CE, docptr, - CDSNControl); - - DoC_Delay(doc, 4); /* Software requirement 11.4.3 for Millennium */ - - /* Wait for the chip to respond - Software requirement 11.4.1 */ - return DoC_WaitReady(doc); -} - -/* Read a buffer from DoC, taking care of Millennium odditys */ -static void DoC_ReadBuf(struct DiskOnChip *doc, u_char * buf, int len) -{ - volatile int dummy; - int modulus = 0xffff; - void __iomem *docptr = doc->virtadr; - int i; - - if (len <= 0) - return; - - if (DoC_is_Millennium(doc)) { - /* Read the data via the internal pipeline through CDSN IO register, - see Pipelined Read Operations 11.3 */ - dummy = ReadDOC(docptr, ReadPipeInit); - - /* Millennium should use the LastDataRead register - Pipeline Reads */ - len--; - - /* This is needed for correctly ECC calculation */ - modulus = 0xff; - } - - for (i = 0; i < len; i++) - buf[i] = ReadDOC_(docptr, doc->ioreg + (i & modulus)); - - if (DoC_is_Millennium(doc)) { - buf[i] = ReadDOC(docptr, LastDataRead); - } -} - -/* Write a buffer to DoC, taking care of Millennium odditys */ -static void DoC_WriteBuf(struct DiskOnChip *doc, const u_char * buf, int len) -{ - void __iomem *docptr = doc->virtadr; - int i; - - if (len <= 0) - return; - - for (i = 0; i < len; i++) - WriteDOC_(buf[i], docptr, doc->ioreg + i); - - if (DoC_is_Millennium(doc)) { - WriteDOC(0x00, docptr, WritePipeTerm); - } -} - - -/* DoC_SelectChip: Select a given flash chip within the current floor */ - -static inline int DoC_SelectChip(struct DiskOnChip *doc, int chip) -{ - void __iomem *docptr = doc->virtadr; - - /* Software requirement 11.4.4 before writing DeviceSelect */ - /* Deassert the CE line to eliminate glitches on the FCE# outputs */ - WriteDOC(CDSN_CTRL_WP, docptr, CDSNControl); - DoC_Delay(doc, 4); /* Software requirement 11.4.3 for Millennium */ - - /* Select the individual flash chip requested */ - WriteDOC(chip, docptr, CDSNDeviceSelect); - DoC_Delay(doc, 4); - - /* Reassert the CE line */ - WriteDOC(CDSN_CTRL_CE | CDSN_CTRL_FLASH_IO | CDSN_CTRL_WP, docptr, - CDSNControl); - DoC_Delay(doc, 4); /* Software requirement 11.4.3 for Millennium */ - - /* Wait for it to be ready */ - return DoC_WaitReady(doc); -} - -/* DoC_SelectFloor: Select a given floor (bank of flash chips) */ - -static inline int DoC_SelectFloor(struct DiskOnChip *doc, int floor) -{ - void __iomem *docptr = doc->virtadr; - - /* Select the floor (bank) of chips required */ - WriteDOC(floor, docptr, FloorSelect); - - /* Wait for the chip to be ready */ - return DoC_WaitReady(doc); -} - -/* DoC_IdentChip: Identify a given NAND chip given {floor,chip} */ - -static int DoC_IdentChip(struct DiskOnChip *doc, int floor, int chip) -{ - int mfr, id, i, j; - volatile char dummy; - - /* Page in the required floor/chip */ - DoC_SelectFloor(doc, floor); - DoC_SelectChip(doc, chip); - - /* Reset the chip */ - if (DoC_Command(doc, NAND_CMD_RESET, CDSN_CTRL_WP)) { - pr_debug("DoC_Command (reset) for %d,%d returned true\n", - floor, chip); - return 0; - } - - - /* Read the NAND chip ID: 1. Send ReadID command */ - if (DoC_Command(doc, NAND_CMD_READID, CDSN_CTRL_WP)) { - pr_debug("DoC_Command (ReadID) for %d,%d returned true\n", - floor, chip); - return 0; - } - - /* Read the NAND chip ID: 2. Send address byte zero */ - DoC_Address(doc, ADDR_COLUMN, 0, CDSN_CTRL_WP, 0); - - /* Read the manufacturer and device id codes from the device */ - - if (DoC_is_Millennium(doc)) { - DoC_Delay(doc, 2); - dummy = ReadDOC(doc->virtadr, ReadPipeInit); - mfr = ReadDOC(doc->virtadr, LastDataRead); - - DoC_Delay(doc, 2); - dummy = ReadDOC(doc->virtadr, ReadPipeInit); - id = ReadDOC(doc->virtadr, LastDataRead); - } else { - /* CDSN Slow IO register see Software Req 11.4 item 5. */ - dummy = ReadDOC(doc->virtadr, CDSNSlowIO); - DoC_Delay(doc, 2); - mfr = ReadDOC_(doc->virtadr, doc->ioreg); - - /* CDSN Slow IO register see Software Req 11.4 item 5. */ - dummy = ReadDOC(doc->virtadr, CDSNSlowIO); - DoC_Delay(doc, 2); - id = ReadDOC_(doc->virtadr, doc->ioreg); - } - - /* No response - return failure */ - if (mfr == 0xff || mfr == 0) - return 0; - - /* Check it's the same as the first chip we identified. - * M-Systems say that any given DiskOnChip device should only - * contain _one_ type of flash part, although that's not a - * hardware restriction. */ - if (doc->mfr) { - if (doc->mfr == mfr && doc->id == id) - return 1; /* This is the same as the first */ - else - printk(KERN_WARNING - "Flash chip at floor %d, chip %d is different:\n", - floor, chip); - } - - /* Print and store the manufacturer and ID codes. */ - for (i = 0; nand_flash_ids[i].name != NULL; i++) { - if (id == nand_flash_ids[i].dev_id) { - /* Try to identify manufacturer */ - for (j = 0; nand_manuf_ids[j].id != 0x0; j++) { - if (nand_manuf_ids[j].id == mfr) - break; - } - printk(KERN_INFO - "Flash chip found: Manufacturer ID: %2.2X, " - "Chip ID: %2.2X (%s:%s)\n", mfr, id, - nand_manuf_ids[j].name, nand_flash_ids[i].name); - if (!doc->mfr) { - doc->mfr = mfr; - doc->id = id; - doc->chipshift = - ffs((nand_flash_ids[i].chipsize << 20)) - 1; - doc->page256 = (nand_flash_ids[i].pagesize == 256) ? 1 : 0; - doc->pageadrlen = doc->chipshift > 25 ? 3 : 2; - doc->erasesize = - nand_flash_ids[i].erasesize; - return 1; - } - return 0; - } - } - - - /* We haven't fully identified the chip. Print as much as we know. */ - printk(KERN_WARNING "Unknown flash chip found: %2.2X %2.2X\n", - id, mfr); - - printk(KERN_WARNING "Please report to dwmw2@infradead.org\n"); - return 0; -} - -/* DoC_ScanChips: Find all NAND chips present in a DiskOnChip, and identify them */ - -static void DoC_ScanChips(struct DiskOnChip *this, int maxchips) -{ - int floor, chip; - int numchips[MAX_FLOORS]; - int ret = 1; - - this->numchips = 0; - this->mfr = 0; - this->id = 0; - - /* For each floor, find the number of valid chips it contains */ - for (floor = 0; floor < MAX_FLOORS; floor++) { - ret = 1; - numchips[floor] = 0; - for (chip = 0; chip < maxchips && ret != 0; chip++) { - - ret = DoC_IdentChip(this, floor, chip); - if (ret) { - numchips[floor]++; - this->numchips++; - } - } - } - - /* If there are none at all that we recognise, bail */ - if (!this->numchips) { - printk(KERN_NOTICE "No flash chips recognised.\n"); - return; - } - - /* Allocate an array to hold the information for each chip */ - this->chips = kmalloc(sizeof(struct Nand) * this->numchips, GFP_KERNEL); - if (!this->chips) { - printk(KERN_NOTICE "No memory for allocating chip info structures\n"); - return; - } - - ret = 0; - - /* Fill out the chip array with {floor, chipno} for each - * detected chip in the device. */ - for (floor = 0; floor < MAX_FLOORS; floor++) { - for (chip = 0; chip < numchips[floor]; chip++) { - this->chips[ret].floor = floor; - this->chips[ret].chip = chip; - this->chips[ret].curadr = 0; - this->chips[ret].curmode = 0x50; - ret++; - } - } - - /* Calculate and print the total size of the device */ - this->totlen = this->numchips * (1 << this->chipshift); - - printk(KERN_INFO "%d flash chips found. Total DiskOnChip size: %ld MiB\n", - this->numchips, this->totlen >> 20); -} - -static int DoC2k_is_alias(struct DiskOnChip *doc1, struct DiskOnChip *doc2) -{ - int tmp1, tmp2, retval; - if (doc1->physadr == doc2->physadr) - return 1; - - /* Use the alias resolution register which was set aside for this - * purpose. If it's value is the same on both chips, they might - * be the same chip, and we write to one and check for a change in - * the other. It's unclear if this register is usuable in the - * DoC 2000 (it's in the Millennium docs), but it seems to work. */ - tmp1 = ReadDOC(doc1->virtadr, AliasResolution); - tmp2 = ReadDOC(doc2->virtadr, AliasResolution); - if (tmp1 != tmp2) - return 0; - - WriteDOC((tmp1 + 1) % 0xff, doc1->virtadr, AliasResolution); - tmp2 = ReadDOC(doc2->virtadr, AliasResolution); - if (tmp2 == (tmp1 + 1) % 0xff) - retval = 1; - else - retval = 0; - - /* Restore register contents. May not be necessary, but do it just to - * be safe. */ - WriteDOC(tmp1, doc1->virtadr, AliasResolution); - - return retval; -} - -/* This routine is found from the docprobe code by symbol_get(), - * which will bump the use count of this module. */ -void DoC2k_init(struct mtd_info *mtd) -{ - struct DiskOnChip *this = mtd->priv; - struct DiskOnChip *old = NULL; - int maxchips; - - /* We must avoid being called twice for the same device. */ - - if (doc2klist) - old = doc2klist->priv; - - while (old) { - if (DoC2k_is_alias(old, this)) { - printk(KERN_NOTICE - "Ignoring DiskOnChip 2000 at 0x%lX - already configured\n", - this->physadr); - iounmap(this->virtadr); - kfree(mtd); - return; - } - if (old->nextdoc) - old = old->nextdoc->priv; - else - old = NULL; - } - - - switch (this->ChipID) { - case DOC_ChipID_Doc2kTSOP: - mtd->name = "DiskOnChip 2000 TSOP"; - this->ioreg = DoC_Mil_CDSN_IO; - /* Pretend it's a Millennium */ - this->ChipID = DOC_ChipID_DocMil; - maxchips = MAX_CHIPS; - break; - case DOC_ChipID_Doc2k: - mtd->name = "DiskOnChip 2000"; - this->ioreg = DoC_2k_CDSN_IO; - maxchips = MAX_CHIPS; - break; - case DOC_ChipID_DocMil: - mtd->name = "DiskOnChip Millennium"; - this->ioreg = DoC_Mil_CDSN_IO; - maxchips = MAX_CHIPS_MIL; - break; - default: - printk("Unknown ChipID 0x%02x\n", this->ChipID); - kfree(mtd); - iounmap(this->virtadr); - return; - } - - printk(KERN_NOTICE "%s found at address 0x%lX\n", mtd->name, - this->physadr); - - mtd->type = MTD_NANDFLASH; - mtd->flags = MTD_CAP_NANDFLASH; - mtd->writebufsize = mtd->writesize = 512; - mtd->oobsize = 16; - mtd->ecc_strength = 2; - mtd->owner = THIS_MODULE; - mtd->_erase = doc_erase; - mtd->_read = doc_read; - mtd->_write = doc_write; - mtd->_read_oob = doc_read_oob; - mtd->_write_oob = doc_write_oob; - this->curfloor = -1; - this->curchip = -1; - mutex_init(&this->lock); - - /* Ident all the chips present. */ - DoC_ScanChips(this, maxchips); - - if (!this->totlen) { - kfree(mtd); - iounmap(this->virtadr); - } else { - this->nextdoc = doc2klist; - doc2klist = mtd; - mtd->size = this->totlen; - mtd->erasesize = this->erasesize; - mtd_device_register(mtd, NULL, 0); - return; - } -} -EXPORT_SYMBOL_GPL(DoC2k_init); - -static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t * retlen, u_char * buf) -{ - struct DiskOnChip *this = mtd->priv; - void __iomem *docptr = this->virtadr; - struct Nand *mychip; - unsigned char syndrome[6], eccbuf[6]; - volatile char dummy; - int i, len256 = 0, ret=0; - size_t left = len; - - mutex_lock(&this->lock); - while (left) { - len = left; - - /* Don't allow a single read to cross a 512-byte block boundary */ - if (from + len > ((from | 0x1ff) + 1)) - len = ((from | 0x1ff) + 1) - from; - - /* The ECC will not be calculated correctly if less than 512 is read */ - if (len != 0x200) - printk(KERN_WARNING - "ECC needs a full sector read (adr: %lx size %lx)\n", - (long) from, (long) len); - - /* printk("DoC_Read (adr: %lx size %lx)\n", (long) from, (long) len); */ - - - /* Find the chip which is to be used and select it */ - mychip = &this->chips[from >> (this->chipshift)]; - - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(this, mychip->floor); - DoC_SelectChip(this, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(this, mychip->chip); - } - - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - DoC_Command(this, - (!this->page256 - && (from & 0x100)) ? NAND_CMD_READ1 : NAND_CMD_READ0, - CDSN_CTRL_WP); - DoC_Address(this, ADDR_COLUMN_PAGE, from, CDSN_CTRL_WP, - CDSN_CTRL_ECC_IO); - - /* Prime the ECC engine */ - WriteDOC(DOC_ECC_RESET, docptr, ECCConf); - WriteDOC(DOC_ECC_EN, docptr, ECCConf); - - /* treat crossing 256-byte sector for 2M x 8bits devices */ - if (this->page256 && from + len > (from | 0xff) + 1) { - len256 = (from | 0xff) + 1 - from; - DoC_ReadBuf(this, buf, len256); - - DoC_Command(this, NAND_CMD_READ0, CDSN_CTRL_WP); - DoC_Address(this, ADDR_COLUMN_PAGE, from + len256, - CDSN_CTRL_WP, CDSN_CTRL_ECC_IO); - } - - DoC_ReadBuf(this, &buf[len256], len - len256); - - /* Let the caller know we completed it */ - *retlen += len; - - /* Read the ECC data through the DiskOnChip ECC logic */ - /* Note: this will work even with 2M x 8bit devices as */ - /* they have 8 bytes of OOB per 256 page. mf. */ - DoC_ReadBuf(this, eccbuf, 6); - - /* Flush the pipeline */ - if (DoC_is_Millennium(this)) { - dummy = ReadDOC(docptr, ECCConf); - dummy = ReadDOC(docptr, ECCConf); - i = ReadDOC(docptr, ECCConf); - } else { - dummy = ReadDOC(docptr, 2k_ECCStatus); - dummy = ReadDOC(docptr, 2k_ECCStatus); - i = ReadDOC(docptr, 2k_ECCStatus); - } - - /* Check the ECC Status */ - if (i & 0x80) { - int nb_errors; - /* There was an ECC error */ -#ifdef ECC_DEBUG - printk(KERN_ERR "DiskOnChip ECC Error: Read at %lx\n", (long)from); -#endif - /* Read the ECC syndrome through the DiskOnChip ECC - logic. These syndrome will be all ZERO when there - is no error */ - for (i = 0; i < 6; i++) { - syndrome[i] = - ReadDOC(docptr, ECCSyndrome0 + i); - } - nb_errors = doc_decode_ecc(buf, syndrome); - -#ifdef ECC_DEBUG - printk(KERN_ERR "Errors corrected: %x\n", nb_errors); -#endif - if (nb_errors < 0) { - /* We return error, but have actually done the - read. Not that this can be told to - user-space, via sys_read(), but at least - MTD-aware stuff can know about it by - checking *retlen */ - ret = -EIO; - } - } - -#ifdef PSYCHO_DEBUG - printk(KERN_DEBUG "ECC DATA at %lxB: %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n", - (long)from, eccbuf[0], eccbuf[1], eccbuf[2], - eccbuf[3], eccbuf[4], eccbuf[5]); -#endif - - /* disable the ECC engine */ - WriteDOC(DOC_ECC_DIS, docptr , ECCConf); - - /* according to 11.4.1, we need to wait for the busy line - * drop if we read to the end of the page. */ - if(0 == ((from + len) & 0x1ff)) - { - DoC_WaitReady(this); - } - - from += len; - left -= len; - buf += len; - } - - mutex_unlock(&this->lock); - - return ret; -} - -static int doc_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t * retlen, const u_char * buf) -{ - struct DiskOnChip *this = mtd->priv; - int di; /* Yes, DI is a hangover from when I was disassembling the binary driver */ - void __iomem *docptr = this->virtadr; - unsigned char eccbuf[6]; - volatile char dummy; - int len256 = 0; - struct Nand *mychip; - size_t left = len; - int status; - - mutex_lock(&this->lock); - while (left) { - len = left; - - /* Don't allow a single write to cross a 512-byte block boundary */ - if (to + len > ((to | 0x1ff) + 1)) - len = ((to | 0x1ff) + 1) - to; - - /* The ECC will not be calculated correctly if less than 512 is written */ -/* DBB- - if (len != 0x200 && eccbuf) - printk(KERN_WARNING - "ECC needs a full sector write (adr: %lx size %lx)\n", - (long) to, (long) len); - -DBB */ - - /* printk("DoC_Write (adr: %lx size %lx)\n", (long) to, (long) len); */ - - /* Find the chip which is to be used and select it */ - mychip = &this->chips[to >> (this->chipshift)]; - - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(this, mychip->floor); - DoC_SelectChip(this, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(this, mychip->chip); - } - - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - /* Set device to main plane of flash */ - DoC_Command(this, NAND_CMD_RESET, CDSN_CTRL_WP); - DoC_Command(this, - (!this->page256 - && (to & 0x100)) ? NAND_CMD_READ1 : NAND_CMD_READ0, - CDSN_CTRL_WP); - - DoC_Command(this, NAND_CMD_SEQIN, 0); - DoC_Address(this, ADDR_COLUMN_PAGE, to, 0, CDSN_CTRL_ECC_IO); - - /* Prime the ECC engine */ - WriteDOC(DOC_ECC_RESET, docptr, ECCConf); - WriteDOC(DOC_ECC_EN | DOC_ECC_RW, docptr, ECCConf); - - /* treat crossing 256-byte sector for 2M x 8bits devices */ - if (this->page256 && to + len > (to | 0xff) + 1) { - len256 = (to | 0xff) + 1 - to; - DoC_WriteBuf(this, buf, len256); - - DoC_Command(this, NAND_CMD_PAGEPROG, 0); - - DoC_Command(this, NAND_CMD_STATUS, CDSN_CTRL_WP); - /* There's an implicit DoC_WaitReady() in DoC_Command */ - - dummy = ReadDOC(docptr, CDSNSlowIO); - DoC_Delay(this, 2); - - if (ReadDOC_(docptr, this->ioreg) & 1) { - printk(KERN_ERR "Error programming flash\n"); - /* Error in programming */ - *retlen = 0; - mutex_unlock(&this->lock); - return -EIO; - } - - DoC_Command(this, NAND_CMD_SEQIN, 0); - DoC_Address(this, ADDR_COLUMN_PAGE, to + len256, 0, - CDSN_CTRL_ECC_IO); - } - - DoC_WriteBuf(this, &buf[len256], len - len256); - - WriteDOC(CDSN_CTRL_ECC_IO | CDSN_CTRL_CE, docptr, CDSNControl); - - if (DoC_is_Millennium(this)) { - WriteDOC(0, docptr, NOP); - WriteDOC(0, docptr, NOP); - WriteDOC(0, docptr, NOP); - } else { - WriteDOC_(0, docptr, this->ioreg); - WriteDOC_(0, docptr, this->ioreg); - WriteDOC_(0, docptr, this->ioreg); - } - - WriteDOC(CDSN_CTRL_ECC_IO | CDSN_CTRL_FLASH_IO | CDSN_CTRL_CE, docptr, - CDSNControl); - - /* Read the ECC data through the DiskOnChip ECC logic */ - for (di = 0; di < 6; di++) { - eccbuf[di] = ReadDOC(docptr, ECCSyndrome0 + di); - } - - /* Reset the ECC engine */ - WriteDOC(DOC_ECC_DIS, docptr, ECCConf); - -#ifdef PSYCHO_DEBUG - printk - ("OOB data at %lx is %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n", - (long) to, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3], - eccbuf[4], eccbuf[5]); -#endif - DoC_Command(this, NAND_CMD_PAGEPROG, 0); - - DoC_Command(this, NAND_CMD_STATUS, CDSN_CTRL_WP); - /* There's an implicit DoC_WaitReady() in DoC_Command */ - - if (DoC_is_Millennium(this)) { - ReadDOC(docptr, ReadPipeInit); - status = ReadDOC(docptr, LastDataRead); - } else { - dummy = ReadDOC(docptr, CDSNSlowIO); - DoC_Delay(this, 2); - status = ReadDOC_(docptr, this->ioreg); - } - - if (status & 1) { - printk(KERN_ERR "Error programming flash\n"); - /* Error in programming */ - *retlen = 0; - mutex_unlock(&this->lock); - return -EIO; - } - - /* Let the caller know we completed it */ - *retlen += len; - - { - unsigned char x[8]; - size_t dummy; - int ret; - - /* Write the ECC data to flash */ - for (di=0; di<6; di++) - x[di] = eccbuf[di]; - - x[6]=0x55; - x[7]=0x55; - - ret = doc_write_oob_nolock(mtd, to, 8, &dummy, x); - if (ret) { - mutex_unlock(&this->lock); - return ret; - } - } - - to += len; - left -= len; - buf += len; - } - - mutex_unlock(&this->lock); - return 0; -} - -static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, - struct mtd_oob_ops *ops) -{ - struct DiskOnChip *this = mtd->priv; - int len256 = 0, ret; - struct Nand *mychip; - uint8_t *buf = ops->oobbuf; - size_t len = ops->len; - - BUG_ON(ops->mode != MTD_OPS_PLACE_OOB); - - ofs += ops->ooboffs; - - mutex_lock(&this->lock); - - mychip = &this->chips[ofs >> this->chipshift]; - - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(this, mychip->floor); - DoC_SelectChip(this, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(this, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - /* update address for 2M x 8bit devices. OOB starts on the second */ - /* page to maintain compatibility with doc_read_ecc. */ - if (this->page256) { - if (!(ofs & 0x8)) - ofs += 0x100; - else - ofs -= 0x8; - } - - DoC_Command(this, NAND_CMD_READOOB, CDSN_CTRL_WP); - DoC_Address(this, ADDR_COLUMN_PAGE, ofs, CDSN_CTRL_WP, 0); - - /* treat crossing 8-byte OOB data for 2M x 8bit devices */ - /* Note: datasheet says it should automaticaly wrap to the */ - /* next OOB block, but it didn't work here. mf. */ - if (this->page256 && ofs + len > (ofs | 0x7) + 1) { - len256 = (ofs | 0x7) + 1 - ofs; - DoC_ReadBuf(this, buf, len256); - - DoC_Command(this, NAND_CMD_READOOB, CDSN_CTRL_WP); - DoC_Address(this, ADDR_COLUMN_PAGE, ofs & (~0x1ff), - CDSN_CTRL_WP, 0); - } - - DoC_ReadBuf(this, &buf[len256], len - len256); - - ops->retlen = len; - /* Reading the full OOB data drops us off of the end of the page, - * causing the flash device to go into busy mode, so we need - * to wait until ready 11.4.1 and Toshiba TC58256FT docs */ - - ret = DoC_WaitReady(this); - - mutex_unlock(&this->lock); - return ret; - -} - -static int doc_write_oob_nolock(struct mtd_info *mtd, loff_t ofs, size_t len, - size_t * retlen, const u_char * buf) -{ - struct DiskOnChip *this = mtd->priv; - int len256 = 0; - void __iomem *docptr = this->virtadr; - struct Nand *mychip = &this->chips[ofs >> this->chipshift]; - volatile int dummy; - int status; - - // printk("doc_write_oob(%lx, %d): %2.2X %2.2X %2.2X %2.2X ... %2.2X %2.2X .. %2.2X %2.2X\n",(long)ofs, len, - // buf[0], buf[1], buf[2], buf[3], buf[8], buf[9], buf[14],buf[15]); - - /* Find the chip which is to be used and select it */ - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(this, mychip->floor); - DoC_SelectChip(this, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(this, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - /* disable the ECC engine */ - WriteDOC (DOC_ECC_RESET, docptr, ECCConf); - WriteDOC (DOC_ECC_DIS, docptr, ECCConf); - - /* Reset the chip, see Software Requirement 11.4 item 1. */ - DoC_Command(this, NAND_CMD_RESET, CDSN_CTRL_WP); - - /* issue the Read2 command to set the pointer to the Spare Data Area. */ - DoC_Command(this, NAND_CMD_READOOB, CDSN_CTRL_WP); - - /* update address for 2M x 8bit devices. OOB starts on the second */ - /* page to maintain compatibility with doc_read_ecc. */ - if (this->page256) { - if (!(ofs & 0x8)) - ofs += 0x100; - else - ofs -= 0x8; - } - - /* issue the Serial Data In command to initial the Page Program process */ - DoC_Command(this, NAND_CMD_SEQIN, 0); - DoC_Address(this, ADDR_COLUMN_PAGE, ofs, 0, 0); - - /* treat crossing 8-byte OOB data for 2M x 8bit devices */ - /* Note: datasheet says it should automaticaly wrap to the */ - /* next OOB block, but it didn't work here. mf. */ - if (this->page256 && ofs + len > (ofs | 0x7) + 1) { - len256 = (ofs | 0x7) + 1 - ofs; - DoC_WriteBuf(this, buf, len256); - - DoC_Command(this, NAND_CMD_PAGEPROG, 0); - DoC_Command(this, NAND_CMD_STATUS, 0); - /* DoC_WaitReady() is implicit in DoC_Command */ - - if (DoC_is_Millennium(this)) { - ReadDOC(docptr, ReadPipeInit); - status = ReadDOC(docptr, LastDataRead); - } else { - dummy = ReadDOC(docptr, CDSNSlowIO); - DoC_Delay(this, 2); - status = ReadDOC_(docptr, this->ioreg); - } - - if (status & 1) { - printk(KERN_ERR "Error programming oob data\n"); - /* There was an error */ - *retlen = 0; - return -EIO; - } - DoC_Command(this, NAND_CMD_SEQIN, 0); - DoC_Address(this, ADDR_COLUMN_PAGE, ofs & (~0x1ff), 0, 0); - } - - DoC_WriteBuf(this, &buf[len256], len - len256); - - DoC_Command(this, NAND_CMD_PAGEPROG, 0); - DoC_Command(this, NAND_CMD_STATUS, 0); - /* DoC_WaitReady() is implicit in DoC_Command */ - - if (DoC_is_Millennium(this)) { - ReadDOC(docptr, ReadPipeInit); - status = ReadDOC(docptr, LastDataRead); - } else { - dummy = ReadDOC(docptr, CDSNSlowIO); - DoC_Delay(this, 2); - status = ReadDOC_(docptr, this->ioreg); - } - - if (status & 1) { - printk(KERN_ERR "Error programming oob data\n"); - /* There was an error */ - *retlen = 0; - return -EIO; - } - - *retlen = len; - return 0; - -} - -static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, - struct mtd_oob_ops *ops) -{ - struct DiskOnChip *this = mtd->priv; - int ret; - - BUG_ON(ops->mode != MTD_OPS_PLACE_OOB); - - mutex_lock(&this->lock); - ret = doc_write_oob_nolock(mtd, ofs + ops->ooboffs, ops->len, - &ops->retlen, ops->oobbuf); - - mutex_unlock(&this->lock); - return ret; -} - -static int doc_erase(struct mtd_info *mtd, struct erase_info *instr) -{ - struct DiskOnChip *this = mtd->priv; - __u32 ofs = instr->addr; - __u32 len = instr->len; - volatile int dummy; - void __iomem *docptr = this->virtadr; - struct Nand *mychip; - int status; - - mutex_lock(&this->lock); - - if (ofs & (mtd->erasesize-1) || len & (mtd->erasesize-1)) { - mutex_unlock(&this->lock); - return -EINVAL; - } - - instr->state = MTD_ERASING; - - /* FIXME: Do this in the background. Use timers or schedule_task() */ - while(len) { - mychip = &this->chips[ofs >> this->chipshift]; - - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(this, mychip->floor); - DoC_SelectChip(this, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(this, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - DoC_Command(this, NAND_CMD_ERASE1, 0); - DoC_Address(this, ADDR_PAGE, ofs, 0, 0); - DoC_Command(this, NAND_CMD_ERASE2, 0); - - DoC_Command(this, NAND_CMD_STATUS, CDSN_CTRL_WP); - - if (DoC_is_Millennium(this)) { - ReadDOC(docptr, ReadPipeInit); - status = ReadDOC(docptr, LastDataRead); - } else { - dummy = ReadDOC(docptr, CDSNSlowIO); - DoC_Delay(this, 2); - status = ReadDOC_(docptr, this->ioreg); - } - - if (status & 1) { - printk(KERN_ERR "Error erasing at 0x%x\n", ofs); - /* There was an error */ - instr->state = MTD_ERASE_FAILED; - goto callback; - } - ofs += mtd->erasesize; - len -= mtd->erasesize; - } - instr->state = MTD_ERASE_DONE; - - callback: - mtd_erase_callback(instr); - - mutex_unlock(&this->lock); - return 0; -} - - -/**************************************************************************** - * - * Module stuff - * - ****************************************************************************/ - -static void __exit cleanup_doc2000(void) -{ - struct mtd_info *mtd; - struct DiskOnChip *this; - - while ((mtd = doc2klist)) { - this = mtd->priv; - doc2klist = this->nextdoc; - - mtd_device_unregister(mtd); - - iounmap(this->virtadr); - kfree(this->chips); - kfree(mtd); - } -} - -module_exit(cleanup_doc2000); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al."); -MODULE_DESCRIPTION("MTD driver for DiskOnChip 2000 and Millennium"); - diff --git a/drivers/mtd/devices/doc2001.c b/drivers/mtd/devices/doc2001.c deleted file mode 100644 index 00644bb..0000000 --- a/drivers/mtd/devices/doc2001.c +++ /dev/null @@ -1,824 +0,0 @@ - -/* - * Linux driver for Disk-On-Chip Millennium - * (c) 1999 Machine Vision Holdings, Inc. - * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org> - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <asm/errno.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <linux/delay.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/bitops.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/doc2000.h> - -/* #define ECC_DEBUG */ - -/* I have no idea why some DoC chips can not use memcop_form|to_io(). - * This may be due to the different revisions of the ASIC controller built-in or - * simplily a QA/Bug issue. Who knows ?? If you have trouble, please uncomment - * this:*/ -#undef USE_MEMCPY - -static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf); -static int doc_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf); -static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, - struct mtd_oob_ops *ops); -static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, - struct mtd_oob_ops *ops); -static int doc_erase (struct mtd_info *mtd, struct erase_info *instr); - -static struct mtd_info *docmillist = NULL; - -/* Perform the required delay cycles by reading from the NOP register */ -static void DoC_Delay(void __iomem * docptr, unsigned short cycles) -{ - volatile char dummy; - int i; - - for (i = 0; i < cycles; i++) - dummy = ReadDOC(docptr, NOP); -} - -/* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */ -static int _DoC_WaitReady(void __iomem * docptr) -{ - unsigned short c = 0xffff; - - pr_debug("_DoC_WaitReady called for out-of-line wait\n"); - - /* Out-of-line routine to wait for chip response */ - while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B) && --c) - ; - - if (c == 0) - pr_debug("_DoC_WaitReady timed out.\n"); - - return (c == 0); -} - -static inline int DoC_WaitReady(void __iomem * docptr) -{ - /* This is inline, to optimise the common case, where it's ready instantly */ - int ret = 0; - - /* 4 read form NOP register should be issued in prior to the read from CDSNControl - see Software Requirement 11.4 item 2. */ - DoC_Delay(docptr, 4); - - if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) - /* Call the out-of-line routine to wait */ - ret = _DoC_WaitReady(docptr); - - /* issue 2 read from NOP register after reading from CDSNControl register - see Software Requirement 11.4 item 2. */ - DoC_Delay(docptr, 2); - - return ret; -} - -/* DoC_Command: Send a flash command to the flash chip through the CDSN IO register - with the internal pipeline. Each of 4 delay cycles (read from the NOP register) is - required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */ - -static void DoC_Command(void __iomem * docptr, unsigned char command, - unsigned char xtraflags) -{ - /* Assert the CLE (Command Latch Enable) line to the flash chip */ - WriteDOC(xtraflags | CDSN_CTRL_CLE | CDSN_CTRL_CE, docptr, CDSNControl); - DoC_Delay(docptr, 4); - - /* Send the command */ - WriteDOC(command, docptr, Mil_CDSN_IO); - WriteDOC(0x00, docptr, WritePipeTerm); - - /* Lower the CLE line */ - WriteDOC(xtraflags | CDSN_CTRL_CE, docptr, CDSNControl); - DoC_Delay(docptr, 4); -} - -/* DoC_Address: Set the current address for the flash chip through the CDSN IO register - with the internal pipeline. Each of 4 delay cycles (read from the NOP register) is - required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */ - -static inline void DoC_Address(void __iomem * docptr, int numbytes, unsigned long ofs, - unsigned char xtraflags1, unsigned char xtraflags2) -{ - /* Assert the ALE (Address Latch Enable) line to the flash chip */ - WriteDOC(xtraflags1 | CDSN_CTRL_ALE | CDSN_CTRL_CE, docptr, CDSNControl); - DoC_Delay(docptr, 4); - - /* Send the address */ - switch (numbytes) - { - case 1: - /* Send single byte, bits 0-7. */ - WriteDOC(ofs & 0xff, docptr, Mil_CDSN_IO); - WriteDOC(0x00, docptr, WritePipeTerm); - break; - case 2: - /* Send bits 9-16 followed by 17-23 */ - WriteDOC((ofs >> 9) & 0xff, docptr, Mil_CDSN_IO); - WriteDOC((ofs >> 17) & 0xff, docptr, Mil_CDSN_IO); - WriteDOC(0x00, docptr, WritePipeTerm); - break; - case 3: - /* Send 0-7, 9-16, then 17-23 */ - WriteDOC(ofs & 0xff, docptr, Mil_CDSN_IO); - WriteDOC((ofs >> 9) & 0xff, docptr, Mil_CDSN_IO); - WriteDOC((ofs >> 17) & 0xff, docptr, Mil_CDSN_IO); - WriteDOC(0x00, docptr, WritePipeTerm); - break; - default: - return; - } - - /* Lower the ALE line */ - WriteDOC(xtraflags1 | xtraflags2 | CDSN_CTRL_CE, docptr, CDSNControl); - DoC_Delay(docptr, 4); -} - -/* DoC_SelectChip: Select a given flash chip within the current floor */ -static int DoC_SelectChip(void __iomem * docptr, int chip) -{ - /* Select the individual flash chip requested */ - WriteDOC(chip, docptr, CDSNDeviceSelect); - DoC_Delay(docptr, 4); - - /* Wait for it to be ready */ - return DoC_WaitReady(docptr); -} - -/* DoC_SelectFloor: Select a given floor (bank of flash chips) */ -static int DoC_SelectFloor(void __iomem * docptr, int floor) -{ - /* Select the floor (bank) of chips required */ - WriteDOC(floor, docptr, FloorSelect); - - /* Wait for the chip to be ready */ - return DoC_WaitReady(docptr); -} - -/* DoC_IdentChip: Identify a given NAND chip given {floor,chip} */ -static int DoC_IdentChip(struct DiskOnChip *doc, int floor, int chip) -{ - int mfr, id, i, j; - volatile char dummy; - - /* Page in the required floor/chip - FIXME: is this supported by Millennium ?? */ - DoC_SelectFloor(doc->virtadr, floor); - DoC_SelectChip(doc->virtadr, chip); - - /* Reset the chip, see Software Requirement 11.4 item 1. */ - DoC_Command(doc->virtadr, NAND_CMD_RESET, CDSN_CTRL_WP); - DoC_WaitReady(doc->virtadr); - - /* Read the NAND chip ID: 1. Send ReadID command */ - DoC_Command(doc->virtadr, NAND_CMD_READID, CDSN_CTRL_WP); - - /* Read the NAND chip ID: 2. Send address byte zero */ - DoC_Address(doc->virtadr, 1, 0x00, CDSN_CTRL_WP, 0x00); - - /* Read the manufacturer and device id codes of the flash device through - CDSN IO register see Software Requirement 11.4 item 5.*/ - dummy = ReadDOC(doc->virtadr, ReadPipeInit); - DoC_Delay(doc->virtadr, 2); - mfr = ReadDOC(doc->virtadr, Mil_CDSN_IO); - - DoC_Delay(doc->virtadr, 2); - id = ReadDOC(doc->virtadr, Mil_CDSN_IO); - dummy = ReadDOC(doc->virtadr, LastDataRead); - - /* No response - return failure */ - if (mfr == 0xff || mfr == 0) - return 0; - - /* FIXME: to deal with multi-flash on multi-Millennium case more carefully */ - for (i = 0; nand_flash_ids[i].name != NULL; i++) { - if ( id == nand_flash_ids[i].dev_id) { - /* Try to identify manufacturer */ - for (j = 0; nand_manuf_ids[j].id != 0x0; j++) { - if (nand_manuf_ids[j].id == mfr) - break; - } - printk(KERN_INFO "Flash chip found: Manufacturer ID: %2.2X, " - "Chip ID: %2.2X (%s:%s)\n", - mfr, id, nand_manuf_ids[j].name, nand_flash_ids[i].name); - doc->mfr = mfr; - doc->id = id; - doc->chipshift = ffs((nand_flash_ids[i].chipsize << 20)) - 1; - break; - } - } - - if (nand_flash_ids[i].name == NULL) - return 0; - else - return 1; -} - -/* DoC_ScanChips: Find all NAND chips present in a DiskOnChip, and identify them */ -static void DoC_ScanChips(struct DiskOnChip *this) -{ - int floor, chip; - int numchips[MAX_FLOORS_MIL]; - int ret; - - this->numchips = 0; - this->mfr = 0; - this->id = 0; - - /* For each floor, find the number of valid chips it contains */ - for (floor = 0,ret = 1; floor < MAX_FLOORS_MIL; floor++) { - numchips[floor] = 0; - for (chip = 0; chip < MAX_CHIPS_MIL && ret != 0; chip++) { - ret = DoC_IdentChip(this, floor, chip); - if (ret) { - numchips[floor]++; - this->numchips++; - } - } - } - /* If there are none at all that we recognise, bail */ - if (!this->numchips) { - printk("No flash chips recognised.\n"); - return; - } - - /* Allocate an array to hold the information for each chip */ - this->chips = kmalloc(sizeof(struct Nand) * this->numchips, GFP_KERNEL); - if (!this->chips){ - printk("No memory for allocating chip info structures\n"); - return; - } - - /* Fill out the chip array with {floor, chipno} for each - * detected chip in the device. */ - for (floor = 0, ret = 0; floor < MAX_FLOORS_MIL; floor++) { - for (chip = 0 ; chip < numchips[floor] ; chip++) { - this->chips[ret].floor = floor; - this->chips[ret].chip = chip; - this->chips[ret].curadr = 0; - this->chips[ret].curmode = 0x50; - ret++; - } - } - - /* Calculate and print the total size of the device */ - this->totlen = this->numchips * (1 << this->chipshift); - printk(KERN_INFO "%d flash chips found. Total DiskOnChip size: %ld MiB\n", - this->numchips ,this->totlen >> 20); -} - -static int DoCMil_is_alias(struct DiskOnChip *doc1, struct DiskOnChip *doc2) -{ - int tmp1, tmp2, retval; - - if (doc1->physadr == doc2->physadr) - return 1; - - /* Use the alias resolution register which was set aside for this - * purpose. If it's value is the same on both chips, they might - * be the same chip, and we write to one and check for a change in - * the other. It's unclear if this register is usuable in the - * DoC 2000 (it's in the Millenium docs), but it seems to work. */ - tmp1 = ReadDOC(doc1->virtadr, AliasResolution); - tmp2 = ReadDOC(doc2->virtadr, AliasResolution); - if (tmp1 != tmp2) - return 0; - - WriteDOC((tmp1+1) % 0xff, doc1->virtadr, AliasResolution); - tmp2 = ReadDOC(doc2->virtadr, AliasResolution); - if (tmp2 == (tmp1+1) % 0xff) - retval = 1; - else - retval = 0; - - /* Restore register contents. May not be necessary, but do it just to - * be safe. */ - WriteDOC(tmp1, doc1->virtadr, AliasResolution); - - return retval; -} - -/* This routine is found from the docprobe code by symbol_get(), - * which will bump the use count of this module. */ -void DoCMil_init(struct mtd_info *mtd) -{ - struct DiskOnChip *this = mtd->priv; - struct DiskOnChip *old = NULL; - - /* We must avoid being called twice for the same device. */ - if (docmillist) - old = docmillist->priv; - - while (old) { - if (DoCMil_is_alias(this, old)) { - printk(KERN_NOTICE "Ignoring DiskOnChip Millennium at " - "0x%lX - already configured\n", this->physadr); - iounmap(this->virtadr); - kfree(mtd); - return; - } - if (old->nextdoc) - old = old->nextdoc->priv; - else - old = NULL; - } - - mtd->name = "DiskOnChip Millennium"; - printk(KERN_NOTICE "DiskOnChip Millennium found at address 0x%lX\n", - this->physadr); - - mtd->type = MTD_NANDFLASH; - mtd->flags = MTD_CAP_NANDFLASH; - - /* FIXME: erase size is not always 8KiB */ - mtd->erasesize = 0x2000; - mtd->writebufsize = mtd->writesize = 512; - mtd->oobsize = 16; - mtd->ecc_strength = 2; - mtd->owner = THIS_MODULE; - mtd->_erase = doc_erase; - mtd->_read = doc_read; - mtd->_write = doc_write; - mtd->_read_oob = doc_read_oob; - mtd->_write_oob = doc_write_oob; - this->curfloor = -1; - this->curchip = -1; - - /* Ident all the chips present. */ - DoC_ScanChips(this); - - if (!this->totlen) { - kfree(mtd); - iounmap(this->virtadr); - } else { - this->nextdoc = docmillist; - docmillist = mtd; - mtd->size = this->totlen; - mtd_device_register(mtd, NULL, 0); - return; - } -} -EXPORT_SYMBOL_GPL(DoCMil_init); - -static int doc_read (struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf) -{ - int i, ret; - volatile char dummy; - unsigned char syndrome[6], eccbuf[6]; - struct DiskOnChip *this = mtd->priv; - void __iomem *docptr = this->virtadr; - struct Nand *mychip = &this->chips[from >> (this->chipshift)]; - - /* Don't allow a single read to cross a 512-byte block boundary */ - if (from + len > ((from | 0x1ff) + 1)) - len = ((from | 0x1ff) + 1) - from; - - /* Find the chip which is to be used and select it */ - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(docptr, mychip->floor); - DoC_SelectChip(docptr, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(docptr, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - /* issue the Read0 or Read1 command depend on which half of the page - we are accessing. Polling the Flash Ready bit after issue 3 bytes - address in Sequence Read Mode, see Software Requirement 11.4 item 1.*/ - DoC_Command(docptr, (from >> 8) & 1, CDSN_CTRL_WP); - DoC_Address(docptr, 3, from, CDSN_CTRL_WP, 0x00); - DoC_WaitReady(docptr); - - /* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/ - WriteDOC (DOC_ECC_RESET, docptr, ECCConf); - WriteDOC (DOC_ECC_EN, docptr, ECCConf); - - /* Read the data via the internal pipeline through CDSN IO register, - see Pipelined Read Operations 11.3 */ - dummy = ReadDOC(docptr, ReadPipeInit); -#ifndef USE_MEMCPY - for (i = 0; i < len-1; i++) { - /* N.B. you have to increase the source address in this way or the - ECC logic will not work properly */ - buf[i] = ReadDOC(docptr, Mil_CDSN_IO + (i & 0xff)); - } -#else - memcpy_fromio(buf, docptr + DoC_Mil_CDSN_IO, len - 1); -#endif - buf[len - 1] = ReadDOC(docptr, LastDataRead); - - /* Let the caller know we completed it */ - *retlen = len; - ret = 0; - - /* Read the ECC data from Spare Data Area, - see Reed-Solomon EDC/ECC 11.1 */ - dummy = ReadDOC(docptr, ReadPipeInit); -#ifndef USE_MEMCPY - for (i = 0; i < 5; i++) { - /* N.B. you have to increase the source address in this way or the - ECC logic will not work properly */ - eccbuf[i] = ReadDOC(docptr, Mil_CDSN_IO + i); - } -#else - memcpy_fromio(eccbuf, docptr + DoC_Mil_CDSN_IO, 5); -#endif - eccbuf[5] = ReadDOC(docptr, LastDataRead); - - /* Flush the pipeline */ - dummy = ReadDOC(docptr, ECCConf); - dummy = ReadDOC(docptr, ECCConf); - - /* Check the ECC Status */ - if (ReadDOC(docptr, ECCConf) & 0x80) { - int nb_errors; - /* There was an ECC error */ -#ifdef ECC_DEBUG - printk("DiskOnChip ECC Error: Read at %lx\n", (long)from); -#endif - /* Read the ECC syndrome through the DiskOnChip ECC logic. - These syndrome will be all ZERO when there is no error */ - for (i = 0; i < 6; i++) { - syndrome[i] = ReadDOC(docptr, ECCSyndrome0 + i); - } - nb_errors = doc_decode_ecc(buf, syndrome); -#ifdef ECC_DEBUG - printk("ECC Errors corrected: %x\n", nb_errors); -#endif - if (nb_errors < 0) { - /* We return error, but have actually done the read. Not that - this can be told to user-space, via sys_read(), but at least - MTD-aware stuff can know about it by checking *retlen */ - ret = -EIO; - } - } - -#ifdef PSYCHO_DEBUG - printk("ECC DATA at %lx: %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n", - (long)from, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3], - eccbuf[4], eccbuf[5]); -#endif - - /* disable the ECC engine */ - WriteDOC(DOC_ECC_DIS, docptr , ECCConf); - - return ret; -} - -static int doc_write (struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) -{ - int i,ret = 0; - char eccbuf[6]; - volatile char dummy; - struct DiskOnChip *this = mtd->priv; - void __iomem *docptr = this->virtadr; - struct Nand *mychip = &this->chips[to >> (this->chipshift)]; - -#if 0 - /* Don't allow a single write to cross a 512-byte block boundary */ - if (to + len > ( (to | 0x1ff) + 1)) - len = ((to | 0x1ff) + 1) - to; -#else - /* Don't allow writes which aren't exactly one block */ - if (to & 0x1ff || len != 0x200) - return -EINVAL; -#endif - - /* Find the chip which is to be used and select it */ - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(docptr, mychip->floor); - DoC_SelectChip(docptr, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(docptr, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - /* Reset the chip, see Software Requirement 11.4 item 1. */ - DoC_Command(docptr, NAND_CMD_RESET, 0x00); - DoC_WaitReady(docptr); - /* Set device to main plane of flash */ - DoC_Command(docptr, NAND_CMD_READ0, 0x00); - - /* issue the Serial Data In command to initial the Page Program process */ - DoC_Command(docptr, NAND_CMD_SEQIN, 0x00); - DoC_Address(docptr, 3, to, 0x00, 0x00); - DoC_WaitReady(docptr); - - /* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/ - WriteDOC (DOC_ECC_RESET, docptr, ECCConf); - WriteDOC (DOC_ECC_EN | DOC_ECC_RW, docptr, ECCConf); - - /* Write the data via the internal pipeline through CDSN IO register, - see Pipelined Write Operations 11.2 */ -#ifndef USE_MEMCPY - for (i = 0; i < len; i++) { - /* N.B. you have to increase the source address in this way or the - ECC logic will not work properly */ - WriteDOC(buf[i], docptr, Mil_CDSN_IO + i); - } -#else - memcpy_toio(docptr + DoC_Mil_CDSN_IO, buf, len); -#endif - WriteDOC(0x00, docptr, WritePipeTerm); - - /* Write ECC data to flash, the ECC info is generated by the DiskOnChip ECC logic - see Reed-Solomon EDC/ECC 11.1 */ - WriteDOC(0, docptr, NOP); - WriteDOC(0, docptr, NOP); - WriteDOC(0, docptr, NOP); - - /* Read the ECC data through the DiskOnChip ECC logic */ - for (i = 0; i < 6; i++) { - eccbuf[i] = ReadDOC(docptr, ECCSyndrome0 + i); - } - - /* ignore the ECC engine */ - WriteDOC(DOC_ECC_DIS, docptr , ECCConf); - -#ifndef USE_MEMCPY - /* Write the ECC data to flash */ - for (i = 0; i < 6; i++) { - /* N.B. you have to increase the source address in this way or the - ECC logic will not work properly */ - WriteDOC(eccbuf[i], docptr, Mil_CDSN_IO + i); - } -#else - memcpy_toio(docptr + DoC_Mil_CDSN_IO, eccbuf, 6); -#endif - - /* write the block status BLOCK_USED (0x5555) at the end of ECC data - FIXME: this is only a hack for programming the IPL area for LinuxBIOS - and should be replace with proper codes in user space utilities */ - WriteDOC(0x55, docptr, Mil_CDSN_IO); - WriteDOC(0x55, docptr, Mil_CDSN_IO + 1); - - WriteDOC(0x00, docptr, WritePipeTerm); - -#ifdef PSYCHO_DEBUG - printk("OOB data at %lx is %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n", - (long) to, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3], - eccbuf[4], eccbuf[5]); -#endif - - /* Commit the Page Program command and wait for ready - see Software Requirement 11.4 item 1.*/ - DoC_Command(docptr, NAND_CMD_PAGEPROG, 0x00); - DoC_WaitReady(docptr); - - /* Read the status of the flash device through CDSN IO register - see Software Requirement 11.4 item 5.*/ - DoC_Command(docptr, NAND_CMD_STATUS, CDSN_CTRL_WP); - dummy = ReadDOC(docptr, ReadPipeInit); - DoC_Delay(docptr, 2); - if (ReadDOC(docptr, Mil_CDSN_IO) & 1) { - printk("Error programming flash\n"); - /* Error in programming - FIXME: implement Bad Block Replacement (in nftl.c ??) */ - ret = -EIO; - } - dummy = ReadDOC(docptr, LastDataRead); - - /* Let the caller know we completed it */ - *retlen = len; - - return ret; -} - -static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, - struct mtd_oob_ops *ops) -{ -#ifndef USE_MEMCPY - int i; -#endif - volatile char dummy; - struct DiskOnChip *this = mtd->priv; - void __iomem *docptr = this->virtadr; - struct Nand *mychip = &this->chips[ofs >> this->chipshift]; - uint8_t *buf = ops->oobbuf; - size_t len = ops->len; - - BUG_ON(ops->mode != MTD_OPS_PLACE_OOB); - - ofs += ops->ooboffs; - - /* Find the chip which is to be used and select it */ - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(docptr, mychip->floor); - DoC_SelectChip(docptr, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(docptr, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - /* disable the ECC engine */ - WriteDOC (DOC_ECC_RESET, docptr, ECCConf); - WriteDOC (DOC_ECC_DIS, docptr, ECCConf); - - /* issue the Read2 command to set the pointer to the Spare Data Area. - Polling the Flash Ready bit after issue 3 bytes address in - Sequence Read Mode, see Software Requirement 11.4 item 1.*/ - DoC_Command(docptr, NAND_CMD_READOOB, CDSN_CTRL_WP); - DoC_Address(docptr, 3, ofs, CDSN_CTRL_WP, 0x00); - DoC_WaitReady(docptr); - - /* Read the data out via the internal pipeline through CDSN IO register, - see Pipelined Read Operations 11.3 */ - dummy = ReadDOC(docptr, ReadPipeInit); -#ifndef USE_MEMCPY - for (i = 0; i < len-1; i++) { - /* N.B. you have to increase the source address in this way or the - ECC logic will not work properly */ - buf[i] = ReadDOC(docptr, Mil_CDSN_IO + i); - } -#else - memcpy_fromio(buf, docptr + DoC_Mil_CDSN_IO, len - 1); -#endif - buf[len - 1] = ReadDOC(docptr, LastDataRead); - - ops->retlen = len; - - return 0; -} - -static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, - struct mtd_oob_ops *ops) -{ -#ifndef USE_MEMCPY - int i; -#endif - volatile char dummy; - int ret = 0; - struct DiskOnChip *this = mtd->priv; - void __iomem *docptr = this->virtadr; - struct Nand *mychip = &this->chips[ofs >> this->chipshift]; - uint8_t *buf = ops->oobbuf; - size_t len = ops->len; - - BUG_ON(ops->mode != MTD_OPS_PLACE_OOB); - - ofs += ops->ooboffs; - - /* Find the chip which is to be used and select it */ - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(docptr, mychip->floor); - DoC_SelectChip(docptr, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(docptr, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - /* disable the ECC engine */ - WriteDOC (DOC_ECC_RESET, docptr, ECCConf); - WriteDOC (DOC_ECC_DIS, docptr, ECCConf); - - /* Reset the chip, see Software Requirement 11.4 item 1. */ - DoC_Command(docptr, NAND_CMD_RESET, CDSN_CTRL_WP); - DoC_WaitReady(docptr); - /* issue the Read2 command to set the pointer to the Spare Data Area. */ - DoC_Command(docptr, NAND_CMD_READOOB, CDSN_CTRL_WP); - - /* issue the Serial Data In command to initial the Page Program process */ - DoC_Command(docptr, NAND_CMD_SEQIN, 0x00); - DoC_Address(docptr, 3, ofs, 0x00, 0x00); - - /* Write the data via the internal pipeline through CDSN IO register, - see Pipelined Write Operations 11.2 */ -#ifndef USE_MEMCPY - for (i = 0; i < len; i++) { - /* N.B. you have to increase the source address in this way or the - ECC logic will not work properly */ - WriteDOC(buf[i], docptr, Mil_CDSN_IO + i); - } -#else - memcpy_toio(docptr + DoC_Mil_CDSN_IO, buf, len); -#endif - WriteDOC(0x00, docptr, WritePipeTerm); - - /* Commit the Page Program command and wait for ready - see Software Requirement 11.4 item 1.*/ - DoC_Command(docptr, NAND_CMD_PAGEPROG, 0x00); - DoC_WaitReady(docptr); - - /* Read the status of the flash device through CDSN IO register - see Software Requirement 11.4 item 5.*/ - DoC_Command(docptr, NAND_CMD_STATUS, 0x00); - dummy = ReadDOC(docptr, ReadPipeInit); - DoC_Delay(docptr, 2); - if (ReadDOC(docptr, Mil_CDSN_IO) & 1) { - printk("Error programming oob data\n"); - /* FIXME: implement Bad Block Replacement (in nftl.c ??) */ - ops->retlen = 0; - ret = -EIO; - } - dummy = ReadDOC(docptr, LastDataRead); - - ops->retlen = len; - - return ret; -} - -int doc_erase (struct mtd_info *mtd, struct erase_info *instr) -{ - volatile char dummy; - struct DiskOnChip *this = mtd->priv; - __u32 ofs = instr->addr; - __u32 len = instr->len; - void __iomem *docptr = this->virtadr; - struct Nand *mychip = &this->chips[ofs >> this->chipshift]; - - if (len != mtd->erasesize) - printk(KERN_WARNING "Erase not right size (%x != %x)n", - len, mtd->erasesize); - - /* Find the chip which is to be used and select it */ - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(docptr, mychip->floor); - DoC_SelectChip(docptr, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(docptr, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - instr->state = MTD_ERASE_PENDING; - - /* issue the Erase Setup command */ - DoC_Command(docptr, NAND_CMD_ERASE1, 0x00); - DoC_Address(docptr, 2, ofs, 0x00, 0x00); - - /* Commit the Erase Start command and wait for ready - see Software Requirement 11.4 item 1.*/ - DoC_Command(docptr, NAND_CMD_ERASE2, 0x00); - DoC_WaitReady(docptr); - - instr->state = MTD_ERASING; - - /* Read the status of the flash device through CDSN IO register - see Software Requirement 11.4 item 5. - FIXME: it seems that we are not wait long enough, some blocks are not - erased fully */ - DoC_Command(docptr, NAND_CMD_STATUS, CDSN_CTRL_WP); - dummy = ReadDOC(docptr, ReadPipeInit); - DoC_Delay(docptr, 2); - if (ReadDOC(docptr, Mil_CDSN_IO) & 1) { - printk("Error Erasing at 0x%x\n", ofs); - /* There was an error - FIXME: implement Bad Block Replacement (in nftl.c ??) */ - instr->state = MTD_ERASE_FAILED; - } else - instr->state = MTD_ERASE_DONE; - dummy = ReadDOC(docptr, LastDataRead); - - mtd_erase_callback(instr); - - return 0; -} - -/**************************************************************************** - * - * Module stuff - * - ****************************************************************************/ - -static void __exit cleanup_doc2001(void) -{ - struct mtd_info *mtd; - struct DiskOnChip *this; - - while ((mtd=docmillist)) { - this = mtd->priv; - docmillist = this->nextdoc; - - mtd_device_unregister(mtd); - - iounmap(this->virtadr); - kfree(this->chips); - kfree(mtd); - } -} - -module_exit(cleanup_doc2001); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al."); -MODULE_DESCRIPTION("Alternative driver for DiskOnChip Millennium"); diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c deleted file mode 100644 index 1b0c12f..0000000 --- a/drivers/mtd/devices/doc2001plus.c +++ /dev/null @@ -1,1080 +0,0 @@ -/* - * Linux driver for Disk-On-Chip Millennium Plus - * - * (c) 2002-2003 Greg Ungerer <gerg@snapgear.com> - * (c) 2002-2003 SnapGear Inc - * (c) 1999 Machine Vision Holdings, Inc. - * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org> - * - * Released under GPL - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <asm/errno.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <linux/delay.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/bitops.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/doc2000.h> - -/* #define ECC_DEBUG */ - -/* I have no idea why some DoC chips can not use memcop_form|to_io(). - * This may be due to the different revisions of the ASIC controller built-in or - * simplily a QA/Bug issue. Who knows ?? If you have trouble, please uncomment - * this:*/ -#undef USE_MEMCPY - -static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf); -static int doc_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf); -static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, - struct mtd_oob_ops *ops); -static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, - struct mtd_oob_ops *ops); -static int doc_erase (struct mtd_info *mtd, struct erase_info *instr); - -static struct mtd_info *docmilpluslist = NULL; - - -/* Perform the required delay cycles by writing to the NOP register */ -static void DoC_Delay(void __iomem * docptr, int cycles) -{ - int i; - - for (i = 0; (i < cycles); i++) - WriteDOC(0, docptr, Mplus_NOP); -} - -#define CDSN_CTRL_FR_B_MASK (CDSN_CTRL_FR_B0 | CDSN_CTRL_FR_B1) - -/* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */ -static int _DoC_WaitReady(void __iomem * docptr) -{ - unsigned int c = 0xffff; - - pr_debug("_DoC_WaitReady called for out-of-line wait\n"); - - /* Out-of-line routine to wait for chip response */ - while (((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) && --c) - ; - - if (c == 0) - pr_debug("_DoC_WaitReady timed out.\n"); - - return (c == 0); -} - -static inline int DoC_WaitReady(void __iomem * docptr) -{ - /* This is inline, to optimise the common case, where it's ready instantly */ - int ret = 0; - - /* read form NOP register should be issued prior to the read from CDSNControl - see Software Requirement 11.4 item 2. */ - DoC_Delay(docptr, 4); - - if ((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) - /* Call the out-of-line routine to wait */ - ret = _DoC_WaitReady(docptr); - - return ret; -} - -/* For some reason the Millennium Plus seems to occasionally put itself - * into reset mode. For me this happens randomly, with no pattern that I - * can detect. M-systems suggest always check this on any block level - * operation and setting to normal mode if in reset mode. - */ -static inline void DoC_CheckASIC(void __iomem * docptr) -{ - /* Make sure the DoC is in normal mode */ - if ((ReadDOC(docptr, Mplus_DOCControl) & DOC_MODE_NORMAL) == 0) { - WriteDOC((DOC_MODE_NORMAL | DOC_MODE_MDWREN), docptr, Mplus_DOCControl); - WriteDOC(~(DOC_MODE_NORMAL | DOC_MODE_MDWREN), docptr, Mplus_CtrlConfirm); - } -} - -/* DoC_Command: Send a flash command to the flash chip through the Flash - * command register. Need 2 Write Pipeline Terminates to complete send. - */ -static void DoC_Command(void __iomem * docptr, unsigned char command, - unsigned char xtraflags) -{ - WriteDOC(command, docptr, Mplus_FlashCmd); - WriteDOC(command, docptr, Mplus_WritePipeTerm); - WriteDOC(command, docptr, Mplus_WritePipeTerm); -} - -/* DoC_Address: Set the current address for the flash chip through the Flash - * Address register. Need 2 Write Pipeline Terminates to complete send. - */ -static inline void DoC_Address(struct DiskOnChip *doc, int numbytes, - unsigned long ofs, unsigned char xtraflags1, - unsigned char xtraflags2) -{ - void __iomem * docptr = doc->virtadr; - - /* Allow for possible Mill Plus internal flash interleaving */ - ofs >>= doc->interleave; - - switch (numbytes) { - case 1: - /* Send single byte, bits 0-7. */ - WriteDOC(ofs & 0xff, docptr, Mplus_FlashAddress); - break; - case 2: - /* Send bits 9-16 followed by 17-23 */ - WriteDOC((ofs >> 9) & 0xff, docptr, Mplus_FlashAddress); - WriteDOC((ofs >> 17) & 0xff, docptr, Mplus_FlashAddress); - break; - case 3: - /* Send 0-7, 9-16, then 17-23 */ - WriteDOC(ofs & 0xff, docptr, Mplus_FlashAddress); - WriteDOC((ofs >> 9) & 0xff, docptr, Mplus_FlashAddress); - WriteDOC((ofs >> 17) & 0xff, docptr, Mplus_FlashAddress); - break; - default: - return; - } - - WriteDOC(0x00, docptr, Mplus_WritePipeTerm); - WriteDOC(0x00, docptr, Mplus_WritePipeTerm); -} - -/* DoC_SelectChip: Select a given flash chip within the current floor */ -static int DoC_SelectChip(void __iomem * docptr, int chip) -{ - /* No choice for flash chip on Millennium Plus */ - return 0; -} - -/* DoC_SelectFloor: Select a given floor (bank of flash chips) */ -static int DoC_SelectFloor(void __iomem * docptr, int floor) -{ - WriteDOC((floor & 0x3), docptr, Mplus_DeviceSelect); - return 0; -} - -/* - * Translate the given offset into the appropriate command and offset. - * This does the mapping using the 16bit interleave layout defined by - * M-Systems, and looks like this for a sector pair: - * +-----------+-------+-------+-------+--------------+---------+-----------+ - * | 0 --- 511 |512-517|518-519|520-521| 522 --- 1033 |1034-1039|1040 - 1055| - * +-----------+-------+-------+-------+--------------+---------+-----------+ - * | Data 0 | ECC 0 |Flags0 |Flags1 | Data 1 |ECC 1 | OOB 1 + 2 | - * +-----------+-------+-------+-------+--------------+---------+-----------+ - */ -/* FIXME: This lives in INFTL not here. Other users of flash devices - may not want it */ -static unsigned int DoC_GetDataOffset(struct mtd_info *mtd, loff_t *from) -{ - struct DiskOnChip *this = mtd->priv; - - if (this->interleave) { - unsigned int ofs = *from & 0x3ff; - unsigned int cmd; - - if (ofs < 512) { - cmd = NAND_CMD_READ0; - ofs &= 0x1ff; - } else if (ofs < 1014) { - cmd = NAND_CMD_READ1; - ofs = (ofs & 0x1ff) + 10; - } else { - cmd = NAND_CMD_READOOB; - ofs = ofs - 1014; - } - - *from = (*from & ~0x3ff) | ofs; - return cmd; - } else { - /* No interleave */ - if ((*from) & 0x100) - return NAND_CMD_READ1; - return NAND_CMD_READ0; - } -} - -static unsigned int DoC_GetECCOffset(struct mtd_info *mtd, loff_t *from) -{ - unsigned int ofs, cmd; - - if (*from & 0x200) { - cmd = NAND_CMD_READOOB; - ofs = 10 + (*from & 0xf); - } else { - cmd = NAND_CMD_READ1; - ofs = (*from & 0xf); - } - - *from = (*from & ~0x3ff) | ofs; - return cmd; -} - -static unsigned int DoC_GetFlagsOffset(struct mtd_info *mtd, loff_t *from) -{ - unsigned int ofs, cmd; - - cmd = NAND_CMD_READ1; - ofs = (*from & 0x200) ? 8 : 6; - *from = (*from & ~0x3ff) | ofs; - return cmd; -} - -static unsigned int DoC_GetHdrOffset(struct mtd_info *mtd, loff_t *from) -{ - unsigned int ofs, cmd; - - cmd = NAND_CMD_READOOB; - ofs = (*from & 0x200) ? 24 : 16; - *from = (*from & ~0x3ff) | ofs; - return cmd; -} - -static inline void MemReadDOC(void __iomem * docptr, unsigned char *buf, int len) -{ -#ifndef USE_MEMCPY - int i; - for (i = 0; i < len; i++) - buf[i] = ReadDOC(docptr, Mil_CDSN_IO + i); -#else - memcpy_fromio(buf, docptr + DoC_Mil_CDSN_IO, len); -#endif -} - -static inline void MemWriteDOC(void __iomem * docptr, unsigned char *buf, int len) -{ -#ifndef USE_MEMCPY - int i; - for (i = 0; i < len; i++) - WriteDOC(buf[i], docptr, Mil_CDSN_IO + i); -#else - memcpy_toio(docptr + DoC_Mil_CDSN_IO, buf, len); -#endif -} - -/* DoC_IdentChip: Identify a given NAND chip given {floor,chip} */ -static int DoC_IdentChip(struct DiskOnChip *doc, int floor, int chip) -{ - int mfr, id, i, j; - volatile char dummy; - void __iomem * docptr = doc->virtadr; - - /* Page in the required floor/chip */ - DoC_SelectFloor(docptr, floor); - DoC_SelectChip(docptr, chip); - - /* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */ - WriteDOC((DOC_FLASH_CE | DOC_FLASH_WP), docptr, Mplus_FlashSelect); - - /* Reset the chip, see Software Requirement 11.4 item 1. */ - DoC_Command(docptr, NAND_CMD_RESET, 0); - DoC_WaitReady(docptr); - - /* Read the NAND chip ID: 1. Send ReadID command */ - DoC_Command(docptr, NAND_CMD_READID, 0); - - /* Read the NAND chip ID: 2. Send address byte zero */ - DoC_Address(doc, 1, 0x00, 0, 0x00); - - WriteDOC(0, docptr, Mplus_FlashControl); - DoC_WaitReady(docptr); - - /* Read the manufacturer and device id codes of the flash device through - CDSN IO register see Software Requirement 11.4 item 5.*/ - dummy = ReadDOC(docptr, Mplus_ReadPipeInit); - dummy = ReadDOC(docptr, Mplus_ReadPipeInit); - - mfr = ReadDOC(docptr, Mil_CDSN_IO); - if (doc->interleave) - dummy = ReadDOC(docptr, Mil_CDSN_IO); /* 2 way interleave */ - - id = ReadDOC(docptr, Mil_CDSN_IO); - if (doc->interleave) - dummy = ReadDOC(docptr, Mil_CDSN_IO); /* 2 way interleave */ - - dummy = ReadDOC(docptr, Mplus_LastDataRead); - dummy = ReadDOC(docptr, Mplus_LastDataRead); - - /* Disable flash internally */ - WriteDOC(0, docptr, Mplus_FlashSelect); - - /* No response - return failure */ - if (mfr == 0xff || mfr == 0) - return 0; - - for (i = 0; nand_flash_ids[i].name != NULL; i++) { - if (id == nand_flash_ids[i].dev_id) { - /* Try to identify manufacturer */ - for (j = 0; nand_manuf_ids[j].id != 0x0; j++) { - if (nand_manuf_ids[j].id == mfr) - break; - } - printk(KERN_INFO "Flash chip found: Manufacturer ID: %2.2X, " - "Chip ID: %2.2X (%s:%s)\n", mfr, id, - nand_manuf_ids[j].name, nand_flash_ids[i].name); - doc->mfr = mfr; - doc->id = id; - doc->chipshift = ffs((nand_flash_ids[i].chipsize << 20)) - 1; - doc->erasesize = nand_flash_ids[i].erasesize << doc->interleave; - break; - } - } - - if (nand_flash_ids[i].name == NULL) - return 0; - return 1; -} - -/* DoC_ScanChips: Find all NAND chips present in a DiskOnChip, and identify them */ -static void DoC_ScanChips(struct DiskOnChip *this) -{ - int floor, chip; - int numchips[MAX_FLOORS_MPLUS]; - int ret; - - this->numchips = 0; - this->mfr = 0; - this->id = 0; - - /* Work out the intended interleave setting */ - this->interleave = 0; - if (this->ChipID == DOC_ChipID_DocMilPlus32) - this->interleave = 1; - - /* Check the ASIC agrees */ - if ( (this->interleave << 2) != - (ReadDOC(this->virtadr, Mplus_Configuration) & 4)) { - u_char conf = ReadDOC(this->virtadr, Mplus_Configuration); - printk(KERN_NOTICE "Setting DiskOnChip Millennium Plus interleave to %s\n", - this->interleave?"on (16-bit)":"off (8-bit)"); - conf ^= 4; - WriteDOC(conf, this->virtadr, Mplus_Configuration); - } - - /* For each floor, find the number of valid chips it contains */ - for (floor = 0,ret = 1; floor < MAX_FLOORS_MPLUS; floor++) { - numchips[floor] = 0; - for (chip = 0; chip < MAX_CHIPS_MPLUS && ret != 0; chip++) { - ret = DoC_IdentChip(this, floor, chip); - if (ret) { - numchips[floor]++; - this->numchips++; - } - } - } - /* If there are none at all that we recognise, bail */ - if (!this->numchips) { - printk("No flash chips recognised.\n"); - return; - } - - /* Allocate an array to hold the information for each chip */ - this->chips = kmalloc(sizeof(struct Nand) * this->numchips, GFP_KERNEL); - if (!this->chips){ - printk("MTD: No memory for allocating chip info structures\n"); - return; - } - - /* Fill out the chip array with {floor, chipno} for each - * detected chip in the device. */ - for (floor = 0, ret = 0; floor < MAX_FLOORS_MPLUS; floor++) { - for (chip = 0 ; chip < numchips[floor] ; chip++) { - this->chips[ret].floor = floor; - this->chips[ret].chip = chip; - this->chips[ret].curadr = 0; - this->chips[ret].curmode = 0x50; - ret++; - } - } - - /* Calculate and print the total size of the device */ - this->totlen = this->numchips * (1 << this->chipshift); - printk(KERN_INFO "%d flash chips found. Total DiskOnChip size: %ld MiB\n", - this->numchips ,this->totlen >> 20); -} - -static int DoCMilPlus_is_alias(struct DiskOnChip *doc1, struct DiskOnChip *doc2) -{ - int tmp1, tmp2, retval; - - if (doc1->physadr == doc2->physadr) - return 1; - - /* Use the alias resolution register which was set aside for this - * purpose. If it's value is the same on both chips, they might - * be the same chip, and we write to one and check for a change in - * the other. It's unclear if this register is usuable in the - * DoC 2000 (it's in the Millennium docs), but it seems to work. */ - tmp1 = ReadDOC(doc1->virtadr, Mplus_AliasResolution); - tmp2 = ReadDOC(doc2->virtadr, Mplus_AliasResolution); - if (tmp1 != tmp2) - return 0; - - WriteDOC((tmp1+1) % 0xff, doc1->virtadr, Mplus_AliasResolution); - tmp2 = ReadDOC(doc2->virtadr, Mplus_AliasResolution); - if (tmp2 == (tmp1+1) % 0xff) - retval = 1; - else - retval = 0; - - /* Restore register contents. May not be necessary, but do it just to - * be safe. */ - WriteDOC(tmp1, doc1->virtadr, Mplus_AliasResolution); - - return retval; -} - -/* This routine is found from the docprobe code by symbol_get(), - * which will bump the use count of this module. */ -void DoCMilPlus_init(struct mtd_info *mtd) -{ - struct DiskOnChip *this = mtd->priv; - struct DiskOnChip *old = NULL; - - /* We must avoid being called twice for the same device. */ - if (docmilpluslist) - old = docmilpluslist->priv; - - while (old) { - if (DoCMilPlus_is_alias(this, old)) { - printk(KERN_NOTICE "Ignoring DiskOnChip Millennium " - "Plus at 0x%lX - already configured\n", - this->physadr); - iounmap(this->virtadr); - kfree(mtd); - return; - } - if (old->nextdoc) - old = old->nextdoc->priv; - else - old = NULL; - } - - mtd->name = "DiskOnChip Millennium Plus"; - printk(KERN_NOTICE "DiskOnChip Millennium Plus found at " - "address 0x%lX\n", this->physadr); - - mtd->type = MTD_NANDFLASH; - mtd->flags = MTD_CAP_NANDFLASH; - mtd->writebufsize = mtd->writesize = 512; - mtd->oobsize = 16; - mtd->ecc_strength = 2; - mtd->owner = THIS_MODULE; - mtd->_erase = doc_erase; - mtd->_read = doc_read; - mtd->_write = doc_write; - mtd->_read_oob = doc_read_oob; - mtd->_write_oob = doc_write_oob; - this->curfloor = -1; - this->curchip = -1; - - /* Ident all the chips present. */ - DoC_ScanChips(this); - - if (!this->totlen) { - kfree(mtd); - iounmap(this->virtadr); - } else { - this->nextdoc = docmilpluslist; - docmilpluslist = mtd; - mtd->size = this->totlen; - mtd->erasesize = this->erasesize; - mtd_device_register(mtd, NULL, 0); - return; - } -} -EXPORT_SYMBOL_GPL(DoCMilPlus_init); - -#if 0 -static int doc_dumpblk(struct mtd_info *mtd, loff_t from) -{ - int i; - loff_t fofs; - struct DiskOnChip *this = mtd->priv; - void __iomem * docptr = this->virtadr; - struct Nand *mychip = &this->chips[from >> (this->chipshift)]; - unsigned char *bp, buf[1056]; - char c[32]; - - from &= ~0x3ff; - - /* Don't allow read past end of device */ - if (from >= this->totlen) - return -EINVAL; - - DoC_CheckASIC(docptr); - - /* Find the chip which is to be used and select it */ - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(docptr, mychip->floor); - DoC_SelectChip(docptr, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(docptr, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - /* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */ - WriteDOC((DOC_FLASH_CE | DOC_FLASH_WP), docptr, Mplus_FlashSelect); - - /* Reset the chip, see Software Requirement 11.4 item 1. */ - DoC_Command(docptr, NAND_CMD_RESET, 0); - DoC_WaitReady(docptr); - - fofs = from; - DoC_Command(docptr, DoC_GetDataOffset(mtd, &fofs), 0); - DoC_Address(this, 3, fofs, 0, 0x00); - WriteDOC(0, docptr, Mplus_FlashControl); - DoC_WaitReady(docptr); - - /* disable the ECC engine */ - WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf); - - ReadDOC(docptr, Mplus_ReadPipeInit); - ReadDOC(docptr, Mplus_ReadPipeInit); - - /* Read the data via the internal pipeline through CDSN IO - register, see Pipelined Read Operations 11.3 */ - MemReadDOC(docptr, buf, 1054); - buf[1054] = ReadDOC(docptr, Mplus_LastDataRead); - buf[1055] = ReadDOC(docptr, Mplus_LastDataRead); - - memset(&c[0], 0, sizeof(c)); - printk("DUMP OFFSET=%x:\n", (int)from); - - for (i = 0, bp = &buf[0]; (i < 1056); i++) { - if ((i % 16) == 0) - printk("%08x: ", i); - printk(" %02x", *bp); - c[(i & 0xf)] = ((*bp >= 0x20) && (*bp <= 0x7f)) ? *bp : '.'; - bp++; - if (((i + 1) % 16) == 0) - printk(" %s\n", c); - } - printk("\n"); - - /* Disable flash internally */ - WriteDOC(0, docptr, Mplus_FlashSelect); - - return 0; -} -#endif - -static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf) -{ - int ret, i; - volatile char dummy; - loff_t fofs; - unsigned char syndrome[6], eccbuf[6]; - struct DiskOnChip *this = mtd->priv; - void __iomem * docptr = this->virtadr; - struct Nand *mychip = &this->chips[from >> (this->chipshift)]; - - /* Don't allow a single read to cross a 512-byte block boundary */ - if (from + len > ((from | 0x1ff) + 1)) - len = ((from | 0x1ff) + 1) - from; - - DoC_CheckASIC(docptr); - - /* Find the chip which is to be used and select it */ - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(docptr, mychip->floor); - DoC_SelectChip(docptr, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(docptr, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - /* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */ - WriteDOC((DOC_FLASH_CE | DOC_FLASH_WP), docptr, Mplus_FlashSelect); - - /* Reset the chip, see Software Requirement 11.4 item 1. */ - DoC_Command(docptr, NAND_CMD_RESET, 0); - DoC_WaitReady(docptr); - - fofs = from; - DoC_Command(docptr, DoC_GetDataOffset(mtd, &fofs), 0); - DoC_Address(this, 3, fofs, 0, 0x00); - WriteDOC(0, docptr, Mplus_FlashControl); - DoC_WaitReady(docptr); - - /* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/ - WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf); - WriteDOC(DOC_ECC_EN, docptr, Mplus_ECCConf); - - /* Let the caller know we completed it */ - *retlen = len; - ret = 0; - - ReadDOC(docptr, Mplus_ReadPipeInit); - ReadDOC(docptr, Mplus_ReadPipeInit); - - /* Read the data via the internal pipeline through CDSN IO - register, see Pipelined Read Operations 11.3 */ - MemReadDOC(docptr, buf, len); - - /* Read the ECC data following raw data */ - MemReadDOC(docptr, eccbuf, 4); - eccbuf[4] = ReadDOC(docptr, Mplus_LastDataRead); - eccbuf[5] = ReadDOC(docptr, Mplus_LastDataRead); - - /* Flush the pipeline */ - dummy = ReadDOC(docptr, Mplus_ECCConf); - dummy = ReadDOC(docptr, Mplus_ECCConf); - - /* Check the ECC Status */ - if (ReadDOC(docptr, Mplus_ECCConf) & 0x80) { - int nb_errors; - /* There was an ECC error */ -#ifdef ECC_DEBUG - printk("DiskOnChip ECC Error: Read at %lx\n", (long)from); -#endif - /* Read the ECC syndrome through the DiskOnChip ECC logic. - These syndrome will be all ZERO when there is no error */ - for (i = 0; i < 6; i++) - syndrome[i] = ReadDOC(docptr, Mplus_ECCSyndrome0 + i); - - nb_errors = doc_decode_ecc(buf, syndrome); -#ifdef ECC_DEBUG - printk("ECC Errors corrected: %x\n", nb_errors); -#endif - if (nb_errors < 0) { - /* We return error, but have actually done the - read. Not that this can be told to user-space, via - sys_read(), but at least MTD-aware stuff can know - about it by checking *retlen */ -#ifdef ECC_DEBUG - printk("%s(%d): Millennium Plus ECC error (from=0x%x:\n", - __FILE__, __LINE__, (int)from); - printk(" syndrome= %*phC\n", 6, syndrome); - printk(" eccbuf= %*phC\n", 6, eccbuf); -#endif - ret = -EIO; - } - } - -#ifdef PSYCHO_DEBUG - printk("ECC DATA at %lx: %*ph\n", (long)from, 6, eccbuf); -#endif - /* disable the ECC engine */ - WriteDOC(DOC_ECC_DIS, docptr , Mplus_ECCConf); - - /* Disable flash internally */ - WriteDOC(0, docptr, Mplus_FlashSelect); - - return ret; -} - -static int doc_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) -{ - int i, before, ret = 0; - loff_t fto; - volatile char dummy; - char eccbuf[6]; - struct DiskOnChip *this = mtd->priv; - void __iomem * docptr = this->virtadr; - struct Nand *mychip = &this->chips[to >> (this->chipshift)]; - - /* Don't allow writes which aren't exactly one block (512 bytes) */ - if ((to & 0x1ff) || (len != 0x200)) - return -EINVAL; - - /* Determine position of OOB flags, before or after data */ - before = (this->interleave && (to & 0x200)); - - DoC_CheckASIC(docptr); - - /* Find the chip which is to be used and select it */ - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(docptr, mychip->floor); - DoC_SelectChip(docptr, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(docptr, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - /* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */ - WriteDOC(DOC_FLASH_CE, docptr, Mplus_FlashSelect); - - /* Reset the chip, see Software Requirement 11.4 item 1. */ - DoC_Command(docptr, NAND_CMD_RESET, 0); - DoC_WaitReady(docptr); - - /* Set device to appropriate plane of flash */ - fto = to; - WriteDOC(DoC_GetDataOffset(mtd, &fto), docptr, Mplus_FlashCmd); - - /* On interleaved devices the flags for 2nd half 512 are before data */ - if (before) - fto -= 2; - - /* issue the Serial Data In command to initial the Page Program process */ - DoC_Command(docptr, NAND_CMD_SEQIN, 0x00); - DoC_Address(this, 3, fto, 0x00, 0x00); - - /* Disable the ECC engine */ - WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf); - - if (before) { - /* Write the block status BLOCK_USED (0x5555) */ - WriteDOC(0x55, docptr, Mil_CDSN_IO); - WriteDOC(0x55, docptr, Mil_CDSN_IO); - } - - /* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/ - WriteDOC(DOC_ECC_EN | DOC_ECC_RW, docptr, Mplus_ECCConf); - - MemWriteDOC(docptr, (unsigned char *) buf, len); - - /* Write ECC data to flash, the ECC info is generated by - the DiskOnChip ECC logic see Reed-Solomon EDC/ECC 11.1 */ - DoC_Delay(docptr, 3); - - /* Read the ECC data through the DiskOnChip ECC logic */ - for (i = 0; i < 6; i++) - eccbuf[i] = ReadDOC(docptr, Mplus_ECCSyndrome0 + i); - - /* disable the ECC engine */ - WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf); - - /* Write the ECC data to flash */ - MemWriteDOC(docptr, eccbuf, 6); - - if (!before) { - /* Write the block status BLOCK_USED (0x5555) */ - WriteDOC(0x55, docptr, Mil_CDSN_IO+6); - WriteDOC(0x55, docptr, Mil_CDSN_IO+7); - } - -#ifdef PSYCHO_DEBUG - printk("OOB data at %lx is %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n", - (long) to, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3], - eccbuf[4], eccbuf[5]); -#endif - - WriteDOC(0x00, docptr, Mplus_WritePipeTerm); - WriteDOC(0x00, docptr, Mplus_WritePipeTerm); - - /* Commit the Page Program command and wait for ready - see Software Requirement 11.4 item 1.*/ - DoC_Command(docptr, NAND_CMD_PAGEPROG, 0x00); - DoC_WaitReady(docptr); - - /* Read the status of the flash device through CDSN IO register - see Software Requirement 11.4 item 5.*/ - DoC_Command(docptr, NAND_CMD_STATUS, 0); - dummy = ReadDOC(docptr, Mplus_ReadPipeInit); - dummy = ReadDOC(docptr, Mplus_ReadPipeInit); - DoC_Delay(docptr, 2); - if ((dummy = ReadDOC(docptr, Mplus_LastDataRead)) & 1) { - printk("MTD: Error 0x%x programming at 0x%x\n", dummy, (int)to); - /* Error in programming - FIXME: implement Bad Block Replacement (in nftl.c ??) */ - ret = -EIO; - } - dummy = ReadDOC(docptr, Mplus_LastDataRead); - - /* Disable flash internally */ - WriteDOC(0, docptr, Mplus_FlashSelect); - - /* Let the caller know we completed it */ - *retlen = len; - - return ret; -} - -static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, - struct mtd_oob_ops *ops) -{ - loff_t fofs, base; - struct DiskOnChip *this = mtd->priv; - void __iomem * docptr = this->virtadr; - struct Nand *mychip = &this->chips[ofs >> this->chipshift]; - size_t i, size, got, want; - uint8_t *buf = ops->oobbuf; - size_t len = ops->len; - - BUG_ON(ops->mode != MTD_OPS_PLACE_OOB); - - ofs += ops->ooboffs; - - DoC_CheckASIC(docptr); - - /* Find the chip which is to be used and select it */ - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(docptr, mychip->floor); - DoC_SelectChip(docptr, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(docptr, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - /* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */ - WriteDOC((DOC_FLASH_CE | DOC_FLASH_WP), docptr, Mplus_FlashSelect); - - /* disable the ECC engine */ - WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf); - DoC_WaitReady(docptr); - - /* Maximum of 16 bytes in the OOB region, so limit read to that */ - if (len > 16) - len = 16; - got = 0; - want = len; - - for (i = 0; ((i < 3) && (want > 0)); i++) { - /* Figure out which region we are accessing... */ - fofs = ofs; - base = ofs & 0xf; - if (!this->interleave) { - DoC_Command(docptr, NAND_CMD_READOOB, 0); - size = 16 - base; - } else if (base < 6) { - DoC_Command(docptr, DoC_GetECCOffset(mtd, &fofs), 0); - size = 6 - base; - } else if (base < 8) { - DoC_Command(docptr, DoC_GetFlagsOffset(mtd, &fofs), 0); - size = 8 - base; - } else { - DoC_Command(docptr, DoC_GetHdrOffset(mtd, &fofs), 0); - size = 16 - base; - } - if (size > want) - size = want; - - /* Issue read command */ - DoC_Address(this, 3, fofs, 0, 0x00); - WriteDOC(0, docptr, Mplus_FlashControl); - DoC_WaitReady(docptr); - - ReadDOC(docptr, Mplus_ReadPipeInit); - ReadDOC(docptr, Mplus_ReadPipeInit); - MemReadDOC(docptr, &buf[got], size - 2); - buf[got + size - 2] = ReadDOC(docptr, Mplus_LastDataRead); - buf[got + size - 1] = ReadDOC(docptr, Mplus_LastDataRead); - - ofs += size; - got += size; - want -= size; - } - - /* Disable flash internally */ - WriteDOC(0, docptr, Mplus_FlashSelect); - - ops->retlen = len; - return 0; -} - -static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, - struct mtd_oob_ops *ops) -{ - volatile char dummy; - loff_t fofs, base; - struct DiskOnChip *this = mtd->priv; - void __iomem * docptr = this->virtadr; - struct Nand *mychip = &this->chips[ofs >> this->chipshift]; - size_t i, size, got, want; - int ret = 0; - uint8_t *buf = ops->oobbuf; - size_t len = ops->len; - - BUG_ON(ops->mode != MTD_OPS_PLACE_OOB); - - ofs += ops->ooboffs; - - DoC_CheckASIC(docptr); - - /* Find the chip which is to be used and select it */ - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(docptr, mychip->floor); - DoC_SelectChip(docptr, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(docptr, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - /* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */ - WriteDOC(DOC_FLASH_CE, docptr, Mplus_FlashSelect); - - - /* Maximum of 16 bytes in the OOB region, so limit write to that */ - if (len > 16) - len = 16; - got = 0; - want = len; - - for (i = 0; ((i < 3) && (want > 0)); i++) { - /* Reset the chip, see Software Requirement 11.4 item 1. */ - DoC_Command(docptr, NAND_CMD_RESET, 0); - DoC_WaitReady(docptr); - - /* Figure out which region we are accessing... */ - fofs = ofs; - base = ofs & 0x0f; - if (!this->interleave) { - WriteDOC(NAND_CMD_READOOB, docptr, Mplus_FlashCmd); - size = 16 - base; - } else if (base < 6) { - WriteDOC(DoC_GetECCOffset(mtd, &fofs), docptr, Mplus_FlashCmd); - size = 6 - base; - } else if (base < 8) { - WriteDOC(DoC_GetFlagsOffset(mtd, &fofs), docptr, Mplus_FlashCmd); - size = 8 - base; - } else { - WriteDOC(DoC_GetHdrOffset(mtd, &fofs), docptr, Mplus_FlashCmd); - size = 16 - base; - } - if (size > want) - size = want; - - /* Issue the Serial Data In command to initial the Page Program process */ - DoC_Command(docptr, NAND_CMD_SEQIN, 0x00); - DoC_Address(this, 3, fofs, 0, 0x00); - - /* Disable the ECC engine */ - WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf); - - /* Write the data via the internal pipeline through CDSN IO - register, see Pipelined Write Operations 11.2 */ - MemWriteDOC(docptr, (unsigned char *) &buf[got], size); - WriteDOC(0x00, docptr, Mplus_WritePipeTerm); - WriteDOC(0x00, docptr, Mplus_WritePipeTerm); - - /* Commit the Page Program command and wait for ready - see Software Requirement 11.4 item 1.*/ - DoC_Command(docptr, NAND_CMD_PAGEPROG, 0x00); - DoC_WaitReady(docptr); - - /* Read the status of the flash device through CDSN IO register - see Software Requirement 11.4 item 5.*/ - DoC_Command(docptr, NAND_CMD_STATUS, 0x00); - dummy = ReadDOC(docptr, Mplus_ReadPipeInit); - dummy = ReadDOC(docptr, Mplus_ReadPipeInit); - DoC_Delay(docptr, 2); - if ((dummy = ReadDOC(docptr, Mplus_LastDataRead)) & 1) { - printk("MTD: Error 0x%x programming oob at 0x%x\n", - dummy, (int)ofs); - /* FIXME: implement Bad Block Replacement */ - ops->retlen = 0; - ret = -EIO; - } - dummy = ReadDOC(docptr, Mplus_LastDataRead); - - ofs += size; - got += size; - want -= size; - } - - /* Disable flash internally */ - WriteDOC(0, docptr, Mplus_FlashSelect); - - ops->retlen = len; - return ret; -} - -int doc_erase(struct mtd_info *mtd, struct erase_info *instr) -{ - volatile char dummy; - struct DiskOnChip *this = mtd->priv; - __u32 ofs = instr->addr; - __u32 len = instr->len; - void __iomem * docptr = this->virtadr; - struct Nand *mychip = &this->chips[ofs >> this->chipshift]; - - DoC_CheckASIC(docptr); - - if (len != mtd->erasesize) - printk(KERN_WARNING "MTD: Erase not right size (%x != %x)n", - len, mtd->erasesize); - - /* Find the chip which is to be used and select it */ - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(docptr, mychip->floor); - DoC_SelectChip(docptr, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(docptr, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - instr->state = MTD_ERASE_PENDING; - - /* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */ - WriteDOC(DOC_FLASH_CE, docptr, Mplus_FlashSelect); - - DoC_Command(docptr, NAND_CMD_RESET, 0x00); - DoC_WaitReady(docptr); - - DoC_Command(docptr, NAND_CMD_ERASE1, 0); - DoC_Address(this, 2, ofs, 0, 0x00); - DoC_Command(docptr, NAND_CMD_ERASE2, 0); - DoC_WaitReady(docptr); - instr->state = MTD_ERASING; - - /* Read the status of the flash device through CDSN IO register - see Software Requirement 11.4 item 5. */ - DoC_Command(docptr, NAND_CMD_STATUS, 0); - dummy = ReadDOC(docptr, Mplus_ReadPipeInit); - dummy = ReadDOC(docptr, Mplus_ReadPipeInit); - if ((dummy = ReadDOC(docptr, Mplus_LastDataRead)) & 1) { - printk("MTD: Error 0x%x erasing at 0x%x\n", dummy, ofs); - /* FIXME: implement Bad Block Replacement (in nftl.c ??) */ - instr->state = MTD_ERASE_FAILED; - } else { - instr->state = MTD_ERASE_DONE; - } - dummy = ReadDOC(docptr, Mplus_LastDataRead); - - /* Disable flash internally */ - WriteDOC(0, docptr, Mplus_FlashSelect); - - mtd_erase_callback(instr); - - return 0; -} - -/**************************************************************************** - * - * Module stuff - * - ****************************************************************************/ - -static void __exit cleanup_doc2001plus(void) -{ - struct mtd_info *mtd; - struct DiskOnChip *this; - - while ((mtd=docmilpluslist)) { - this = mtd->priv; - docmilpluslist = this->nextdoc; - - mtd_device_unregister(mtd); - - iounmap(this->virtadr); - kfree(this->chips); - kfree(mtd); - } -} - -module_exit(cleanup_doc2001plus); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Greg Ungerer <gerg@snapgear.com> et al."); -MODULE_DESCRIPTION("Driver for DiskOnChip Millennium Plus"); diff --git a/drivers/mtd/devices/docecc.c b/drivers/mtd/devices/docecc.c deleted file mode 100644 index 4a1c39b..0000000 --- a/drivers/mtd/devices/docecc.c +++ /dev/null @@ -1,521 +0,0 @@ -/* - * ECC algorithm for M-systems disk on chip. We use the excellent Reed - * Solmon code of Phil Karn (karn@ka9q.ampr.org) available under the - * GNU GPL License. The rest is simply to convert the disk on chip - * syndrome into a standard syndome. - * - * Author: Fabrice Bellard (fabrice.bellard@netgem.com) - * Copyright (C) 2000 Netgem S.A. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <asm/errno.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <linux/delay.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/types.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/doc2000.h> - -#define DEBUG_ECC 0 -/* need to undef it (from asm/termbits.h) */ -#undef B0 - -#define MM 10 /* Symbol size in bits */ -#define KK (1023-4) /* Number of data symbols per block */ -#define B0 510 /* First root of generator polynomial, alpha form */ -#define PRIM 1 /* power of alpha used to generate roots of generator poly */ -#define NN ((1 << MM) - 1) - -typedef unsigned short dtype; - -/* 1+x^3+x^10 */ -static const int Pp[MM+1] = { 1, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1 }; - -/* This defines the type used to store an element of the Galois Field - * used by the code. Make sure this is something larger than a char if - * if anything larger than GF(256) is used. - * - * Note: unsigned char will work up to GF(256) but int seems to run - * faster on the Pentium. - */ -typedef int gf; - -/* No legal value in index form represents zero, so - * we need a special value for this purpose - */ -#define A0 (NN) - -/* Compute x % NN, where NN is 2**MM - 1, - * without a slow divide - */ -static inline gf -modnn(int x) -{ - while (x >= NN) { - x -= NN; - x = (x >> MM) + (x & NN); - } - return x; -} - -#define CLEAR(a,n) {\ -int ci;\ -for(ci=(n)-1;ci >=0;ci--)\ -(a)[ci] = 0;\ -} - -#define COPY(a,b,n) {\ -int ci;\ -for(ci=(n)-1;ci >=0;ci--)\ -(a)[ci] = (b)[ci];\ -} - -#define COPYDOWN(a,b,n) {\ -int ci;\ -for(ci=(n)-1;ci >=0;ci--)\ -(a)[ci] = (b)[ci];\ -} - -#define Ldec 1 - -/* generate GF(2**m) from the irreducible polynomial p(X) in Pp[0]..Pp[m] - lookup tables: index->polynomial form alpha_to[] contains j=alpha**i; - polynomial form -> index form index_of[j=alpha**i] = i - alpha=2 is the primitive element of GF(2**m) - HARI's COMMENT: (4/13/94) alpha_to[] can be used as follows: - Let @ represent the primitive element commonly called "alpha" that - is the root of the primitive polynomial p(x). Then in GF(2^m), for any - 0 <= i <= 2^m-2, - @^i = a(0) + a(1) @ + a(2) @^2 + ... + a(m-1) @^(m-1) - where the binary vector (a(0),a(1),a(2),...,a(m-1)) is the representation - of the integer "alpha_to[i]" with a(0) being the LSB and a(m-1) the MSB. Thus for - example the polynomial representation of @^5 would be given by the binary - representation of the integer "alpha_to[5]". - Similarly, index_of[] can be used as follows: - As above, let @ represent the primitive element of GF(2^m) that is - the root of the primitive polynomial p(x). In order to find the power - of @ (alpha) that has the polynomial representation - a(0) + a(1) @ + a(2) @^2 + ... + a(m-1) @^(m-1) - we consider the integer "i" whose binary representation with a(0) being LSB - and a(m-1) MSB is (a(0),a(1),...,a(m-1)) and locate the entry - "index_of[i]". Now, @^index_of[i] is that element whose polynomial - representation is (a(0),a(1),a(2),...,a(m-1)). - NOTE: - The element alpha_to[2^m-1] = 0 always signifying that the - representation of "@^infinity" = 0 is (0,0,0,...,0). - Similarly, the element index_of[0] = A0 always signifying - that the power of alpha which has the polynomial representation - (0,0,...,0) is "infinity". - -*/ - -static void -generate_gf(dtype Alpha_to[NN + 1], dtype Index_of[NN + 1]) -{ - register int i, mask; - - mask = 1; - Alpha_to[MM] = 0; - for (i = 0; i < MM; i++) { - Alpha_to[i] = mask; - Index_of[Alpha_to[i]] = i; - /* If Pp[i] == 1 then, term @^i occurs in poly-repr of @^MM */ - if (Pp[i] != 0) - Alpha_to[MM] ^= mask; /* Bit-wise EXOR operation */ - mask <<= 1; /* single left-shift */ - } - Index_of[Alpha_to[MM]] = MM; - /* - * Have obtained poly-repr of @^MM. Poly-repr of @^(i+1) is given by - * poly-repr of @^i shifted left one-bit and accounting for any @^MM - * term that may occur when poly-repr of @^i is shifted. - */ - mask >>= 1; - for (i = MM + 1; i < NN; i++) { - if (Alpha_to[i - 1] >= mask) - Alpha_to[i] = Alpha_to[MM] ^ ((Alpha_to[i - 1] ^ mask) << 1); - else - Alpha_to[i] = Alpha_to[i - 1] << 1; - Index_of[Alpha_to[i]] = i; - } - Index_of[0] = A0; - Alpha_to[NN] = 0; -} - -/* - * Performs ERRORS+ERASURES decoding of RS codes. bb[] is the content - * of the feedback shift register after having processed the data and - * the ECC. - * - * Return number of symbols corrected, or -1 if codeword is illegal - * or uncorrectable. If eras_pos is non-null, the detected error locations - * are written back. NOTE! This array must be at least NN-KK elements long. - * The corrected data are written in eras_val[]. They must be xor with the data - * to retrieve the correct data : data[erase_pos[i]] ^= erase_val[i] . - * - * First "no_eras" erasures are declared by the calling program. Then, the - * maximum # of errors correctable is t_after_eras = floor((NN-KK-no_eras)/2). - * If the number of channel errors is not greater than "t_after_eras" the - * transmitted codeword will be recovered. Details of algorithm can be found - * in R. Blahut's "Theory ... of Error-Correcting Codes". - - * Warning: the eras_pos[] array must not contain duplicate entries; decoder failure - * will result. The decoder *could* check for this condition, but it would involve - * extra time on every decoding operation. - * */ -static int -eras_dec_rs(dtype Alpha_to[NN + 1], dtype Index_of[NN + 1], - gf bb[NN - KK + 1], gf eras_val[NN-KK], int eras_pos[NN-KK], - int no_eras) -{ - int deg_lambda, el, deg_omega; - int i, j, r,k; - gf u,q,tmp,num1,num2,den,discr_r; - gf lambda[NN-KK + 1], s[NN-KK + 1]; /* Err+Eras Locator poly - * and syndrome poly */ - gf b[NN-KK + 1], t[NN-KK + 1], omega[NN-KK + 1]; - gf root[NN-KK], reg[NN-KK + 1], loc[NN-KK]; - int syn_error, count; - - syn_error = 0; - for(i=0;i<NN-KK;i++) - syn_error |= bb[i]; - - if (!syn_error) { - /* if remainder is zero, data[] is a codeword and there are no - * errors to correct. So return data[] unmodified - */ - count = 0; - goto finish; - } - - for(i=1;i<=NN-KK;i++){ - s[i] = bb[0]; - } - for(j=1;j<NN-KK;j++){ - if(bb[j] == 0) - continue; - tmp = Index_of[bb[j]]; - - for(i=1;i<=NN-KK;i++) - s[i] ^= Alpha_to[modnn(tmp + (B0+i-1)*PRIM*j)]; - } - - /* undo the feedback register implicit multiplication and convert - syndromes to index form */ - - for(i=1;i<=NN-KK;i++) { - tmp = Index_of[s[i]]; - if (tmp != A0) - tmp = modnn(tmp + 2 * KK * (B0+i-1)*PRIM); - s[i] = tmp; - } - - CLEAR(&lambda[1],NN-KK); - lambda[0] = 1; - - if (no_eras > 0) { - /* Init lambda to be the erasure locator polynomial */ - lambda[1] = Alpha_to[modnn(PRIM * eras_pos[0])]; - for (i = 1; i < no_eras; i++) { - u = modnn(PRIM*eras_pos[i]); - for (j = i+1; j > 0; j--) { - tmp = Index_of[lambda[j - 1]]; - if(tmp != A0) - lambda[j] ^= Alpha_to[modnn(u + tmp)]; - } - } -#if DEBUG_ECC >= 1 - /* Test code that verifies the erasure locator polynomial just constructed - Needed only for decoder debugging. */ - - /* find roots of the erasure location polynomial */ - for(i=1;i<=no_eras;i++) - reg[i] = Index_of[lambda[i]]; - count = 0; - for (i = 1,k=NN-Ldec; i <= NN; i++,k = modnn(NN+k-Ldec)) { - q = 1; - for (j = 1; j <= no_eras; j++) - if (reg[j] != A0) { - reg[j] = modnn(reg[j] + j); - q ^= Alpha_to[reg[j]]; - } - if (q != 0) - continue; - /* store root and error location number indices */ - root[count] = i; - loc[count] = k; - count++; - } - if (count != no_eras) { - printf("\n lambda(x) is WRONG\n"); - count = -1; - goto finish; - } -#if DEBUG_ECC >= 2 - printf("\n Erasure positions as determined by roots of Eras Loc Poly:\n"); - for (i = 0; i < count; i++) - printf("%d ", loc[i]); - printf("\n"); -#endif -#endif - } - for(i=0;i<NN-KK+1;i++) - b[i] = Index_of[lambda[i]]; - - /* - * Begin Berlekamp-Massey algorithm to determine error+erasure - * locator polynomial - */ - r = no_eras; - el = no_eras; - while (++r <= NN-KK) { /* r is the step number */ - /* Compute discrepancy at the r-th step in poly-form */ - discr_r = 0; - for (i = 0; i < r; i++){ - if ((lambda[i] != 0) && (s[r - i] != A0)) { - discr_r ^= Alpha_to[modnn(Index_of[lambda[i]] + s[r - i])]; - } - } - discr_r = Index_of[discr_r]; /* Index form */ - if (discr_r == A0) { - /* 2 lines below: B(x) <-- x*B(x) */ - COPYDOWN(&b[1],b,NN-KK); - b[0] = A0; - } else { - /* 7 lines below: T(x) <-- lambda(x) - discr_r*x*b(x) */ - t[0] = lambda[0]; - for (i = 0 ; i < NN-KK; i++) { - if(b[i] != A0) - t[i+1] = lambda[i+1] ^ Alpha_to[modnn(discr_r + b[i])]; - else - t[i+1] = lambda[i+1]; - } - if (2 * el <= r + no_eras - 1) { - el = r + no_eras - el; - /* - * 2 lines below: B(x) <-- inv(discr_r) * - * lambda(x) - */ - for (i = 0; i <= NN-KK; i++) - b[i] = (lambda[i] == 0) ? A0 : modnn(Index_of[lambda[i]] - discr_r + NN); - } else { - /* 2 lines below: B(x) <-- x*B(x) */ - COPYDOWN(&b[1],b,NN-KK); - b[0] = A0; - } - COPY(lambda,t,NN-KK+1); - } - } - - /* Convert lambda to index form and compute deg(lambda(x)) */ - deg_lambda = 0; - for(i=0;i<NN-KK+1;i++){ - lambda[i] = Index_of[lambda[i]]; - if(lambda[i] != A0) - deg_lambda = i; - } - /* - * Find roots of the error+erasure locator polynomial by Chien - * Search - */ - COPY(®[1],&lambda[1],NN-KK); - count = 0; /* Number of roots of lambda(x) */ - for (i = 1,k=NN-Ldec; i <= NN; i++,k = modnn(NN+k-Ldec)) { - q = 1; - for (j = deg_lambda; j > 0; j--){ - if (reg[j] != A0) { - reg[j] = modnn(reg[j] + j); - q ^= Alpha_to[reg[j]]; - } - } - if (q != 0) - continue; - /* store root (index-form) and error location number */ - root[count] = i; - loc[count] = k; - /* If we've already found max possible roots, - * abort the search to save time - */ - if(++count == deg_lambda) - break; - } - if (deg_lambda != count) { - /* - * deg(lambda) unequal to number of roots => uncorrectable - * error detected - */ - count = -1; - goto finish; - } - /* - * Compute err+eras evaluator poly omega(x) = s(x)*lambda(x) (modulo - * x**(NN-KK)). in index form. Also find deg(omega). - */ - deg_omega = 0; - for (i = 0; i < NN-KK;i++){ - tmp = 0; - j = (deg_lambda < i) ? deg_lambda : i; - for(;j >= 0; j--){ - if ((s[i + 1 - j] != A0) && (lambda[j] != A0)) - tmp ^= Alpha_to[modnn(s[i + 1 - j] + lambda[j])]; - } - if(tmp != 0) - deg_omega = i; - omega[i] = Index_of[tmp]; - } - omega[NN-KK] = A0; - - /* - * Compute error values in poly-form. num1 = omega(inv(X(l))), num2 = - * inv(X(l))**(B0-1) and den = lambda_pr(inv(X(l))) all in poly-form - */ - for (j = count-1; j >=0; j--) { - num1 = 0; - for (i = deg_omega; i >= 0; i--) { - if (omega[i] != A0) - num1 ^= Alpha_to[modnn(omega[i] + i * root[j])]; - } - num2 = Alpha_to[modnn(root[j] * (B0 - 1) + NN)]; - den = 0; - - /* lambda[i+1] for i even is the formal derivative lambda_pr of lambda[i] */ - for (i = min(deg_lambda,NN-KK-1) & ~1; i >= 0; i -=2) { - if(lambda[i+1] != A0) - den ^= Alpha_to[modnn(lambda[i+1] + i * root[j])]; - } - if (den == 0) { -#if DEBUG_ECC >= 1 - printf("\n ERROR: denominator = 0\n"); -#endif - /* Convert to dual- basis */ - count = -1; - goto finish; - } - /* Apply error to data */ - if (num1 != 0) { - eras_val[j] = Alpha_to[modnn(Index_of[num1] + Index_of[num2] + NN - Index_of[den])]; - } else { - eras_val[j] = 0; - } - } - finish: - for(i=0;i<count;i++) - eras_pos[i] = loc[i]; - return count; -} - -/***************************************************************************/ -/* The DOC specific code begins here */ - -#define SECTOR_SIZE 512 -/* The sector bytes are packed into NB_DATA MM bits words */ -#define NB_DATA (((SECTOR_SIZE + 1) * 8 + 6) / MM) - -/* - * Correct the errors in 'sector[]' by using 'ecc1[]' which is the - * content of the feedback shift register applyied to the sector and - * the ECC. Return the number of errors corrected (and correct them in - * sector), or -1 if error - */ -int doc_decode_ecc(unsigned char sector[SECTOR_SIZE], unsigned char ecc1[6]) -{ - int parity, i, nb_errors; - gf bb[NN - KK + 1]; - gf error_val[NN-KK]; - int error_pos[NN-KK], pos, bitpos, index, val; - dtype *Alpha_to, *Index_of; - - /* init log and exp tables here to save memory. However, it is slower */ - Alpha_to = kmalloc((NN + 1) * sizeof(dtype), GFP_KERNEL); - if (!Alpha_to) - return -1; - - Index_of = kmalloc((NN + 1) * sizeof(dtype), GFP_KERNEL); - if (!Index_of) { - kfree(Alpha_to); - return -1; - } - - generate_gf(Alpha_to, Index_of); - - parity = ecc1[1]; - - bb[0] = (ecc1[4] & 0xff) | ((ecc1[5] & 0x03) << 8); - bb[1] = ((ecc1[5] & 0xfc) >> 2) | ((ecc1[2] & 0x0f) << 6); - bb[2] = ((ecc1[2] & 0xf0) >> 4) | ((ecc1[3] & 0x3f) << 4); - bb[3] = ((ecc1[3] & 0xc0) >> 6) | ((ecc1[0] & 0xff) << 2); - - nb_errors = eras_dec_rs(Alpha_to, Index_of, bb, - error_val, error_pos, 0); - if (nb_errors <= 0) - goto the_end; - - /* correct the errors */ - for(i=0;i<nb_errors;i++) { - pos = error_pos[i]; - if (pos >= NB_DATA && pos < KK) { - nb_errors = -1; - goto the_end; - } - if (pos < NB_DATA) { - /* extract bit position (MSB first) */ - pos = 10 * (NB_DATA - 1 - pos) - 6; - /* now correct the following 10 bits. At most two bytes - can be modified since pos is even */ - index = (pos >> 3) ^ 1; - bitpos = pos & 7; - if ((index >= 0 && index < SECTOR_SIZE) || - index == (SECTOR_SIZE + 1)) { - val = error_val[i] >> (2 + bitpos); - parity ^= val; - if (index < SECTOR_SIZE) - sector[index] ^= val; - } - index = ((pos >> 3) + 1) ^ 1; - bitpos = (bitpos + 10) & 7; - if (bitpos == 0) - bitpos = 8; - if ((index >= 0 && index < SECTOR_SIZE) || - index == (SECTOR_SIZE + 1)) { - val = error_val[i] << (8 - bitpos); - parity ^= val; - if (index < SECTOR_SIZE) - sector[index] ^= val; - } - } - } - - /* use parity to test extra errors */ - if ((parity & 0xff) != 0) - nb_errors = -1; - - the_end: - kfree(Alpha_to); - kfree(Index_of); - return nb_errors; -} - -EXPORT_SYMBOL_GPL(doc_decode_ecc); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Fabrice Bellard <fabrice.bellard@netgem.com>"); -MODULE_DESCRIPTION("ECC code for correcting errors detected by DiskOnChip 2000 and Millennium ECC hardware"); diff --git a/drivers/mtd/devices/docprobe.c b/drivers/mtd/devices/docprobe.c deleted file mode 100644 index 88b3fd3..0000000 --- a/drivers/mtd/devices/docprobe.c +++ /dev/null @@ -1,325 +0,0 @@ - -/* Linux driver for Disk-On-Chip devices */ -/* Probe routines common to all DoC devices */ -/* (C) 1999 Machine Vision Holdings, Inc. */ -/* (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> */ - - -/* DOC_PASSIVE_PROBE: - In order to ensure that the BIOS checksum is correct at boot time, and - hence that the onboard BIOS extension gets executed, the DiskOnChip - goes into reset mode when it is read sequentially: all registers - return 0xff until the chip is woken up again by writing to the - DOCControl register. - - Unfortunately, this means that the probe for the DiskOnChip is unsafe, - because one of the first things it does is write to where it thinks - the DOCControl register should be - which may well be shared memory - for another device. I've had machines which lock up when this is - attempted. Hence the possibility to do a passive probe, which will fail - to detect a chip in reset mode, but is at least guaranteed not to lock - the machine. - - If you have this problem, uncomment the following line: -#define DOC_PASSIVE_PROBE -*/ - - -/* DOC_SINGLE_DRIVER: - Millennium driver has been merged into DOC2000 driver. - - The old Millennium-only driver has been retained just in case there - are problems with the new code. If the combined driver doesn't work - for you, you can try the old one by undefining DOC_SINGLE_DRIVER - below and also enabling it in your configuration. If this fixes the - problems, please send a report to the MTD mailing list at - <linux-mtd@lists.infradead.org>. -*/ -#define DOC_SINGLE_DRIVER - -#include <linux/kernel.h> -#include <linux/module.h> -#include <asm/errno.h> -#include <asm/io.h> -#include <linux/delay.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/types.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/doc2000.h> - - -static unsigned long doc_config_location = CONFIG_MTD_DOCPROBE_ADDRESS; -module_param(doc_config_location, ulong, 0); -MODULE_PARM_DESC(doc_config_location, "Physical memory address at which to probe for DiskOnChip"); - -static unsigned long __initdata doc_locations[] = { -#if defined (__alpha__) || defined(__i386__) || defined(__x86_64__) -#ifdef CONFIG_MTD_DOCPROBE_HIGH - 0xfffc8000, 0xfffca000, 0xfffcc000, 0xfffce000, - 0xfffd0000, 0xfffd2000, 0xfffd4000, 0xfffd6000, - 0xfffd8000, 0xfffda000, 0xfffdc000, 0xfffde000, - 0xfffe0000, 0xfffe2000, 0xfffe4000, 0xfffe6000, - 0xfffe8000, 0xfffea000, 0xfffec000, 0xfffee000, -#else /* CONFIG_MTD_DOCPROBE_HIGH */ - 0xc8000, 0xca000, 0xcc000, 0xce000, - 0xd0000, 0xd2000, 0xd4000, 0xd6000, - 0xd8000, 0xda000, 0xdc000, 0xde000, - 0xe0000, 0xe2000, 0xe4000, 0xe6000, - 0xe8000, 0xea000, 0xec000, 0xee000, -#endif /* CONFIG_MTD_DOCPROBE_HIGH */ -#endif - 0xffffffff }; - -/* doccheck: Probe a given memory window to see if there's a DiskOnChip present */ - -static inline int __init doccheck(void __iomem *potential, unsigned long physadr) -{ - void __iomem *window=potential; - unsigned char tmp, tmpb, tmpc, ChipID; -#ifndef DOC_PASSIVE_PROBE - unsigned char tmp2; -#endif - - /* Routine copied from the Linux DOC driver */ - -#ifdef CONFIG_MTD_DOCPROBE_55AA - /* Check for 0x55 0xAA signature at beginning of window, - this is no longer true once we remove the IPL (for Millennium */ - if (ReadDOC(window, Sig1) != 0x55 || ReadDOC(window, Sig2) != 0xaa) - return 0; -#endif /* CONFIG_MTD_DOCPROBE_55AA */ - -#ifndef DOC_PASSIVE_PROBE - /* It's not possible to cleanly detect the DiskOnChip - the - * bootup procedure will put the device into reset mode, and - * it's not possible to talk to it without actually writing - * to the DOCControl register. So we store the current contents - * of the DOCControl register's location, in case we later decide - * that it's not a DiskOnChip, and want to put it back how we - * found it. - */ - tmp2 = ReadDOC(window, DOCControl); - - /* Reset the DiskOnChip ASIC */ - WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, - window, DOCControl); - WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, - window, DOCControl); - - /* Enable the DiskOnChip ASIC */ - WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, - window, DOCControl); - WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, - window, DOCControl); -#endif /* !DOC_PASSIVE_PROBE */ - - /* We need to read the ChipID register four times. For some - newer DiskOnChip 2000 units, the first three reads will - return the DiskOnChip Millennium ident. Don't ask. */ - ChipID = ReadDOC(window, ChipID); - - switch (ChipID) { - case DOC_ChipID_Doc2k: - /* Check the TOGGLE bit in the ECC register */ - tmp = ReadDOC(window, 2k_ECCStatus) & DOC_TOGGLE_BIT; - tmpb = ReadDOC(window, 2k_ECCStatus) & DOC_TOGGLE_BIT; - tmpc = ReadDOC(window, 2k_ECCStatus) & DOC_TOGGLE_BIT; - if (tmp != tmpb && tmp == tmpc) - return ChipID; - break; - - case DOC_ChipID_DocMil: - /* Check for the new 2000 with Millennium ASIC */ - ReadDOC(window, ChipID); - ReadDOC(window, ChipID); - if (ReadDOC(window, ChipID) != DOC_ChipID_DocMil) - ChipID = DOC_ChipID_Doc2kTSOP; - - /* Check the TOGGLE bit in the ECC register */ - tmp = ReadDOC(window, ECCConf) & DOC_TOGGLE_BIT; - tmpb = ReadDOC(window, ECCConf) & DOC_TOGGLE_BIT; - tmpc = ReadDOC(window, ECCConf) & DOC_TOGGLE_BIT; - if (tmp != tmpb && tmp == tmpc) - return ChipID; - break; - - case DOC_ChipID_DocMilPlus16: - case DOC_ChipID_DocMilPlus32: - case 0: - /* Possible Millennium+, need to do more checks */ -#ifndef DOC_PASSIVE_PROBE - /* Possibly release from power down mode */ - for (tmp = 0; (tmp < 4); tmp++) - ReadDOC(window, Mplus_Power); - - /* Reset the DiskOnChip ASIC */ - tmp = DOC_MODE_RESET | DOC_MODE_MDWREN | DOC_MODE_RST_LAT | - DOC_MODE_BDECT; - WriteDOC(tmp, window, Mplus_DOCControl); - WriteDOC(~tmp, window, Mplus_CtrlConfirm); - - mdelay(1); - /* Enable the DiskOnChip ASIC */ - tmp = DOC_MODE_NORMAL | DOC_MODE_MDWREN | DOC_MODE_RST_LAT | - DOC_MODE_BDECT; - WriteDOC(tmp, window, Mplus_DOCControl); - WriteDOC(~tmp, window, Mplus_CtrlConfirm); - mdelay(1); -#endif /* !DOC_PASSIVE_PROBE */ - - ChipID = ReadDOC(window, ChipID); - - switch (ChipID) { - case DOC_ChipID_DocMilPlus16: - case DOC_ChipID_DocMilPlus32: - /* Check the TOGGLE bit in the toggle register */ - tmp = ReadDOC(window, Mplus_Toggle) & DOC_TOGGLE_BIT; - tmpb = ReadDOC(window, Mplus_Toggle) & DOC_TOGGLE_BIT; - tmpc = ReadDOC(window, Mplus_Toggle) & DOC_TOGGLE_BIT; - if (tmp != tmpb && tmp == tmpc) - return ChipID; - default: - break; - } - /* FALL TRHU */ - - default: - -#ifdef CONFIG_MTD_DOCPROBE_55AA - printk(KERN_DEBUG "Possible DiskOnChip with unknown ChipID %2.2X found at 0x%lx\n", - ChipID, physadr); -#endif -#ifndef DOC_PASSIVE_PROBE - /* Put back the contents of the DOCControl register, in case it's not - * actually a DiskOnChip. - */ - WriteDOC(tmp2, window, DOCControl); -#endif - return 0; - } - - printk(KERN_WARNING "DiskOnChip failed TOGGLE test, dropping.\n"); - -#ifndef DOC_PASSIVE_PROBE - /* Put back the contents of the DOCControl register: it's not a DiskOnChip */ - WriteDOC(tmp2, window, DOCControl); -#endif - return 0; -} - -static int docfound; - -extern void DoC2k_init(struct mtd_info *); -extern void DoCMil_init(struct mtd_info *); -extern void DoCMilPlus_init(struct mtd_info *); - -static void __init DoC_Probe(unsigned long physadr) -{ - void __iomem *docptr; - struct DiskOnChip *this; - struct mtd_info *mtd; - int ChipID; - char namebuf[15]; - char *name = namebuf; - void (*initroutine)(struct mtd_info *) = NULL; - - docptr = ioremap(physadr, DOC_IOREMAP_LEN); - - if (!docptr) - return; - - if ((ChipID = doccheck(docptr, physadr))) { - if (ChipID == DOC_ChipID_Doc2kTSOP) { - /* Remove this at your own peril. The hardware driver works but nothing prevents you from erasing bad blocks */ - printk(KERN_NOTICE "Refusing to drive DiskOnChip 2000 TSOP until Bad Block Table is correctly supported by INFTL\n"); - iounmap(docptr); - return; - } - docfound = 1; - mtd = kzalloc(sizeof(struct DiskOnChip) + sizeof(struct mtd_info), GFP_KERNEL); - if (!mtd) { - printk(KERN_WARNING "Cannot allocate memory for data structures. Dropping.\n"); - iounmap(docptr); - return; - } - - this = (struct DiskOnChip *)(&mtd[1]); - mtd->priv = this; - this->virtadr = docptr; - this->physadr = physadr; - this->ChipID = ChipID; - sprintf(namebuf, "with ChipID %2.2X", ChipID); - - switch(ChipID) { - case DOC_ChipID_Doc2kTSOP: - name="2000 TSOP"; - initroutine = symbol_request(DoC2k_init); - break; - - case DOC_ChipID_Doc2k: - name="2000"; - initroutine = symbol_request(DoC2k_init); - break; - - case DOC_ChipID_DocMil: - name="Millennium"; -#ifdef DOC_SINGLE_DRIVER - initroutine = symbol_request(DoC2k_init); -#else - initroutine = symbol_request(DoCMil_init); -#endif /* DOC_SINGLE_DRIVER */ - break; - - case DOC_ChipID_DocMilPlus16: - case DOC_ChipID_DocMilPlus32: - name="MillenniumPlus"; - initroutine = symbol_request(DoCMilPlus_init); - break; - } - - if (initroutine) { - (*initroutine)(mtd); - symbol_put_addr(initroutine); - return; - } - printk(KERN_NOTICE "Cannot find driver for DiskOnChip %s at 0x%lX\n", name, physadr); - kfree(mtd); - } - iounmap(docptr); -} - - -/**************************************************************************** - * - * Module stuff - * - ****************************************************************************/ - -static int __init init_doc(void) -{ - int i; - - if (doc_config_location) { - printk(KERN_INFO "Using configured DiskOnChip probe address 0x%lx\n", doc_config_location); - DoC_Probe(doc_config_location); - } else { - for (i=0; (doc_locations[i] != 0xffffffff); i++) { - DoC_Probe(doc_locations[i]); - } - } - /* No banner message any more. Print a message if no DiskOnChip - found, so the user knows we at least tried. */ - if (!docfound) - printk(KERN_INFO "No recognised DiskOnChip devices found\n"); - return -EAGAIN; -} - -module_init(init_doc); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>"); -MODULE_DESCRIPTION("Probe code for DiskOnChip 2000 and Millennium devices"); - |