diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2010-08-16 00:32:47 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2010-08-16 00:32:47 (GMT) |
commit | 7355a5a654ccbbfd2fd11bb1e2389910f786ea92 (patch) | |
tree | a1aa0b16bab51f8c5c505fe237d3ba6ba20b88aa /drivers/mtd/nand/denali.c | |
parent | 7a1b29a82ba76427de791098c095ce31dab9333d (diff) | |
parent | 84c4f46d9c0bd67b763b01a6b4c86dcfde6c818a (diff) | |
download | linux-7355a5a654ccbbfd2fd11bb1e2389910f786ea92.tar.xz |
Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6:
mtd/nand_ids: Fix buswidth
mtd/m25p80: fix test for end of loop
mtd/m25p80: retlen is never NULL
MIPS: Fix gen_nand probe structures contents
gen_nand: Test if nr_chips field is valid
BFIN: Fix gen_nand probe structures contents
nand/denali: move all hardware initialization work to denali_hw_init
nand/denali: Add a page check in denali_read_page & denali_read_page_raw
nand/denali: use cpu_relax() while waiting for hardware interrupt
nand/denali: change read_status function method
nand/denali: Fixed check patch warnings
ARM: Fix gen_nand probe structures contents
mtd/nand_base: fix kernel-doc warnings & typos
nand/denali: use dev_xx debug function to replace nand_dbg_print and some printk
nand/denali: Fixed handle ECC error bugs
nand/denali: use iowrite32() to replace denali_write32()
nand/denali: Fixed probe function bugs
Diffstat (limited to 'drivers/mtd/nand/denali.c')
-rw-r--r-- | drivers/mtd/nand/denali.c | 497 |
1 files changed, 194 insertions, 303 deletions
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 618fb42..532fe07 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -56,7 +56,7 @@ MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting." INTR_STATUS0__ERASE_COMP) /* indicates whether or not the internal value for the flash bank is - valid or not */ + * valid or not */ #define CHIP_SELECT_INVALID -1 #define SUPPORT_8BITECC 1 @@ -71,7 +71,7 @@ MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting." #define mtd_to_denali(m) container_of(m, struct denali_nand_info, mtd) /* These constants are defined by the driver to enable common driver - configuration options. */ + * configuration options. */ #define SPARE_ACCESS 0x41 #define MAIN_ACCESS 0x42 #define MAIN_SPARE_ACCESS 0x43 @@ -97,7 +97,7 @@ static const struct pci_device_id denali_pci_ids[] = { /* these are static lookup tables that give us easy access to - registers in the NAND controller. + * registers in the NAND controller. */ static const uint32_t intr_status_addresses[4] = {INTR_STATUS0, INTR_STATUS1, @@ -119,9 +119,6 @@ static const uint32_t reset_complete[4] = {INTR_STATUS0__RST_COMP, INTR_STATUS2__RST_COMP, INTR_STATUS3__RST_COMP}; -/* specifies the debug level of the driver */ -static int nand_debug_level; - /* forward declarations */ static void clear_interrupts(struct denali_nand_info *denali); static uint32_t wait_for_irq(struct denali_nand_info *denali, @@ -130,22 +127,6 @@ static void denali_irq_enable(struct denali_nand_info *denali, uint32_t int_mask); static uint32_t read_interrupt_status(struct denali_nand_info *denali); -#define DEBUG_DENALI 0 - -/* This is a wrapper for writing to the denali registers. - * this allows us to create debug information so we can - * observe how the driver is programming the device. - * it uses standard linux convention for (val, addr) */ -static void denali_write32(uint32_t value, void *addr) -{ - iowrite32(value, addr); - -#if DEBUG_DENALI - printk(KERN_INFO "wrote: 0x%x -> 0x%x\n", value, - (uint32_t)((uint32_t)addr & 0x1fff)); -#endif -} - /* Certain operations for the denali NAND controller use * an indexed mode to read/write data. The operation is * performed by writing the address value of the command @@ -155,15 +136,15 @@ static void denali_write32(uint32_t value, void *addr) static void index_addr(struct denali_nand_info *denali, uint32_t address, uint32_t data) { - denali_write32(address, denali->flash_mem); - denali_write32(data, denali->flash_mem + 0x10); + iowrite32(address, denali->flash_mem); + iowrite32(data, denali->flash_mem + 0x10); } /* Perform an indexed read of the device */ static void index_addr_read_data(struct denali_nand_info *denali, uint32_t address, uint32_t *pdata) { - denali_write32(address, denali->flash_mem); + iowrite32(address, denali->flash_mem); *pdata = ioread32(denali->flash_mem + 0x10); } @@ -188,18 +169,11 @@ static void read_status(struct denali_nand_info *denali) /* initialize the data buffer to store status */ reset_buf(denali); - /* initiate a device status read */ - cmd = MODE_11 | BANK(denali->flash_bank); - index_addr(denali, cmd | COMMAND_CYCLE, 0x70); - denali_write32(cmd | STATUS_CYCLE, denali->flash_mem); - - /* update buffer with status value */ - write_byte_to_buf(denali, ioread32(denali->flash_mem + 0x10)); - -#if DEBUG_DENALI - printk(KERN_INFO "device reporting status value of 0x%2x\n", - denali->buf.buf[0]); -#endif + cmd = ioread32(denali->flash_reg + WRITE_PROTECT); + if (cmd) + write_byte_to_buf(denali, NAND_STATUS_WP); + else + write_byte_to_buf(denali, 0); } /* resets a specific device connected to the core */ @@ -213,12 +187,12 @@ static void reset_bank(struct denali_nand_info *denali) clear_interrupts(denali); bank = device_reset_banks[denali->flash_bank]; - denali_write32(bank, denali->flash_reg + DEVICE_RESET); + iowrite32(bank, denali->flash_reg + DEVICE_RESET); irq_status = wait_for_irq(denali, irq_mask); if (irq_status & operation_timeout[denali->flash_bank]) - printk(KERN_ERR "reset bank failed.\n"); + dev_err(&denali->dev->dev, "reset bank failed.\n"); } /* Reset the flash controller */ @@ -226,28 +200,28 @@ static uint16_t denali_nand_reset(struct denali_nand_info *denali) { uint32_t i; - nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n", + dev_dbg(&denali->dev->dev, "%s, Line %d, Function: %s\n", __FILE__, __LINE__, __func__); for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++) - denali_write32(reset_complete[i] | operation_timeout[i], + iowrite32(reset_complete[i] | operation_timeout[i], denali->flash_reg + intr_status_addresses[i]); for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++) { - denali_write32(device_reset_banks[i], + iowrite32(device_reset_banks[i], denali->flash_reg + DEVICE_RESET); while (!(ioread32(denali->flash_reg + - intr_status_addresses[i]) & + intr_status_addresses[i]) & (reset_complete[i] | operation_timeout[i]))) - ; + cpu_relax(); if (ioread32(denali->flash_reg + intr_status_addresses[i]) & operation_timeout[i]) - nand_dbg_print(NAND_DBG_WARN, + dev_dbg(&denali->dev->dev, "NAND Reset operation timed out on bank %d\n", i); } for (i = 0; i < LLD_MAX_FLASH_BANKS; i++) - denali_write32(reset_complete[i] | operation_timeout[i], + iowrite32(reset_complete[i] | operation_timeout[i], denali->flash_reg + intr_status_addresses[i]); return PASS; @@ -280,7 +254,7 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali, uint16_t acc_clks; uint16_t addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt; - nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n", + dev_dbg(&denali->dev->dev, "%s, Line %d, Function: %s\n", __FILE__, __LINE__, __func__); en_lo = CEIL_DIV(Trp[mode], CLK_X); @@ -317,7 +291,7 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali, acc_clks++; if ((data_invalid - acc_clks * CLK_X) < 2) - nand_dbg_print(NAND_DBG_WARN, "%s, Line %d: Warning!\n", + dev_warn(&denali->dev->dev, "%s, Line %d: Warning!\n", __FILE__, __LINE__); addr_2_data = CEIL_DIV(Tadl[mode], CLK_X); @@ -345,14 +319,14 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali, (ioread32(denali->flash_reg + DEVICE_ID) == 0x88)) acc_clks = 6; - denali_write32(acc_clks, denali->flash_reg + ACC_CLKS); - denali_write32(re_2_we, denali->flash_reg + RE_2_WE); - denali_write32(re_2_re, denali->flash_reg + RE_2_RE); - denali_write32(we_2_re, denali->flash_reg + WE_2_RE); - denali_write32(addr_2_data, denali->flash_reg + ADDR_2_DATA); - denali_write32(en_lo, denali->flash_reg + RDWR_EN_LO_CNT); - denali_write32(en_hi, denali->flash_reg + RDWR_EN_HI_CNT); - denali_write32(cs_cnt, denali->flash_reg + CS_SETUP_CNT); + iowrite32(acc_clks, denali->flash_reg + ACC_CLKS); + iowrite32(re_2_we, denali->flash_reg + RE_2_WE); + iowrite32(re_2_re, denali->flash_reg + RE_2_RE); + iowrite32(we_2_re, denali->flash_reg + WE_2_RE); + iowrite32(addr_2_data, denali->flash_reg + ADDR_2_DATA); + iowrite32(en_lo, denali->flash_reg + RDWR_EN_LO_CNT); + iowrite32(en_hi, denali->flash_reg + RDWR_EN_HI_CNT); + iowrite32(cs_cnt, denali->flash_reg + CS_SETUP_CNT); } /* queries the NAND device to see what ONFI modes it supports. */ @@ -387,13 +361,13 @@ static void get_samsung_nand_para(struct denali_nand_info *denali, { if (device_id == 0xd3) { /* Samsung K9WAG08U1A */ /* Set timing register values according to datasheet */ - denali_write32(5, denali->flash_reg + ACC_CLKS); - denali_write32(20, denali->flash_reg + RE_2_WE); - denali_write32(12, denali->flash_reg + WE_2_RE); - denali_write32(14, denali->flash_reg + ADDR_2_DATA); - denali_write32(3, denali->flash_reg + RDWR_EN_LO_CNT); - denali_write32(2, denali->flash_reg + RDWR_EN_HI_CNT); - denali_write32(2, denali->flash_reg + CS_SETUP_CNT); + iowrite32(5, denali->flash_reg + ACC_CLKS); + iowrite32(20, denali->flash_reg + RE_2_WE); + iowrite32(12, denali->flash_reg + WE_2_RE); + iowrite32(14, denali->flash_reg + ADDR_2_DATA); + iowrite32(3, denali->flash_reg + RDWR_EN_LO_CNT); + iowrite32(2, denali->flash_reg + RDWR_EN_HI_CNT); + iowrite32(2, denali->flash_reg + CS_SETUP_CNT); } } @@ -405,15 +379,15 @@ static void get_toshiba_nand_para(struct denali_nand_info *denali) /* spare area size for some kind of Toshiba NAND device */ if ((ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) == 4096) && (ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) == 64)) { - denali_write32(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE); + iowrite32(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE); tmp = ioread32(denali->flash_reg + DEVICES_CONNECTED) * ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE); - denali_write32(tmp, + iowrite32(tmp, denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE); #if SUPPORT_15BITECC - denali_write32(15, denali->flash_reg + ECC_CORRECTION); + iowrite32(15, denali->flash_reg + ECC_CORRECTION); #elif SUPPORT_8BITECC - denali_write32(8, denali->flash_reg + ECC_CORRECTION); + iowrite32(8, denali->flash_reg + ECC_CORRECTION); #endif } } @@ -426,26 +400,26 @@ static void get_hynix_nand_para(struct denali_nand_info *denali, switch (device_id) { case 0xD5: /* Hynix H27UAG8T2A, H27UBG8U5A or H27UCG8VFA */ case 0xD7: /* Hynix H27UDG8VEM, H27UCG8UDM or H27UCG8V5A */ - denali_write32(128, denali->flash_reg + PAGES_PER_BLOCK); - denali_write32(4096, denali->flash_reg + DEVICE_MAIN_AREA_SIZE); - denali_write32(224, denali->flash_reg + DEVICE_SPARE_AREA_SIZE); + iowrite32(128, denali->flash_reg + PAGES_PER_BLOCK); + iowrite32(4096, denali->flash_reg + DEVICE_MAIN_AREA_SIZE); + iowrite32(224, denali->flash_reg + DEVICE_SPARE_AREA_SIZE); main_size = 4096 * ioread32(denali->flash_reg + DEVICES_CONNECTED); spare_size = 224 * ioread32(denali->flash_reg + DEVICES_CONNECTED); - denali_write32(main_size, + iowrite32(main_size, denali->flash_reg + LOGICAL_PAGE_DATA_SIZE); - denali_write32(spare_size, + iowrite32(spare_size, denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE); - denali_write32(0, denali->flash_reg + DEVICE_WIDTH); + iowrite32(0, denali->flash_reg + DEVICE_WIDTH); #if SUPPORT_15BITECC - denali_write32(15, denali->flash_reg + ECC_CORRECTION); + iowrite32(15, denali->flash_reg + ECC_CORRECTION); #elif SUPPORT_8BITECC - denali_write32(8, denali->flash_reg + ECC_CORRECTION); + iowrite32(8, denali->flash_reg + ECC_CORRECTION); #endif break; default: - nand_dbg_print(NAND_DBG_WARN, + dev_warn(&denali->dev->dev, "Spectra: Unknown Hynix NAND (Device ID: 0x%x)." "Will use default parameter values instead.\n", device_id); @@ -453,7 +427,7 @@ static void get_hynix_nand_para(struct denali_nand_info *denali, } /* determines how many NAND chips are connected to the controller. Note for - Intel CE4100 devices we don't support more than one device. + * Intel CE4100 devices we don't support more than one device. */ static void find_valid_banks(struct denali_nand_info *denali) { @@ -467,7 +441,7 @@ static void find_valid_banks(struct denali_nand_info *denali) index_addr_read_data(denali, (uint32_t)(MODE_11 | (i << 24) | 2), &id[i]); - nand_dbg_print(NAND_DBG_DEBUG, + dev_dbg(&denali->dev->dev, "Return 1st ID for bank[%d]: %x\n", i, id[i]); if (i == 0) { @@ -487,12 +461,13 @@ static void find_valid_banks(struct denali_nand_info *denali) * Multichip support is not enabled. */ if (denali->total_used_banks != 1) { - printk(KERN_ERR "Sorry, Intel CE4100 only supports " + dev_err(&denali->dev->dev, + "Sorry, Intel CE4100 only supports " "a single NAND device.\n"); BUG(); } } - nand_dbg_print(NAND_DBG_DEBUG, + dev_dbg(&denali->dev->dev, "denali->total_used_banks: %d\n", denali->total_used_banks); } @@ -526,8 +501,9 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali) uint32_t id_bytes[5], addr; uint8_t i, maf_id, device_id; - nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n", - __FILE__, __LINE__, __func__); + dev_dbg(&denali->dev->dev, + "%s, Line %d, Function: %s\n", + __FILE__, __LINE__, __func__); /* Use read id method to get device ID and other * params. For some NAND chips, controller can't @@ -554,12 +530,14 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali) get_hynix_nand_para(denali, device_id); } - nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:" - "acc_clks: %d, re_2_we: %d, we_2_re: %d," - "addr_2_data: %d, rdwr_en_lo_cnt: %d, " + dev_info(&denali->dev->dev, + "Dump timing register values:" + "acc_clks: %d, re_2_we: %d, re_2_re: %d\n" + "we_2_re: %d, addr_2_data: %d, rdwr_en_lo_cnt: %d\n" "rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n", ioread32(denali->flash_reg + ACC_CLKS), ioread32(denali->flash_reg + RE_2_WE), + ioread32(denali->flash_reg + RE_2_RE), ioread32(denali->flash_reg + WE_2_RE), ioread32(denali->flash_reg + ADDR_2_DATA), ioread32(denali->flash_reg + RDWR_EN_LO_CNT), @@ -582,17 +560,17 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali) static void denali_set_intr_modes(struct denali_nand_info *denali, uint16_t INT_ENABLE) { - nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n", + dev_dbg(&denali->dev->dev, "%s, Line %d, Function: %s\n", __FILE__, __LINE__, __func__); if (INT_ENABLE) - denali_write32(1, denali->flash_reg + GLOBAL_INT_ENABLE); + iowrite32(1, denali->flash_reg + GLOBAL_INT_ENABLE); else - denali_write32(0, denali->flash_reg + GLOBAL_INT_ENABLE); + iowrite32(0, denali->flash_reg + GLOBAL_INT_ENABLE); } /* validation function to verify that the controlling software is making - a valid request + * a valid request */ static inline bool is_flash_bank_valid(int flash_bank) { @@ -609,10 +587,10 @@ static void denali_irq_init(struct denali_nand_info *denali) int_mask = DENALI_IRQ_ALL; /* Clear all status bits */ - denali_write32(0xFFFF, denali->flash_reg + INTR_STATUS0); - denali_write32(0xFFFF, denali->flash_reg + INTR_STATUS1); - denali_write32(0xFFFF, denali->flash_reg + INTR_STATUS2); - denali_write32(0xFFFF, denali->flash_reg + INTR_STATUS3); + iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS0); + iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS1); + iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS2); + iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS3); denali_irq_enable(denali, int_mask); } @@ -626,10 +604,10 @@ static void denali_irq_cleanup(int irqnum, struct denali_nand_info *denali) static void denali_irq_enable(struct denali_nand_info *denali, uint32_t int_mask) { - denali_write32(int_mask, denali->flash_reg + INTR_EN0); - denali_write32(int_mask, denali->flash_reg + INTR_EN1); - denali_write32(int_mask, denali->flash_reg + INTR_EN2); - denali_write32(int_mask, denali->flash_reg + INTR_EN3); + iowrite32(int_mask, denali->flash_reg + INTR_EN0); + iowrite32(int_mask, denali->flash_reg + INTR_EN1); + iowrite32(int_mask, denali->flash_reg + INTR_EN2); + iowrite32(int_mask, denali->flash_reg + INTR_EN3); } /* This function only returns when an interrupt that this driver cares about @@ -648,7 +626,7 @@ static inline void clear_interrupt(struct denali_nand_info *denali, intr_status_reg = intr_status_addresses[denali->flash_bank]; - denali_write32(irq_mask, denali->flash_reg + intr_status_reg); + iowrite32(irq_mask, denali->flash_reg + intr_status_reg); } static void clear_interrupts(struct denali_nand_info *denali) @@ -657,11 +635,7 @@ static void clear_interrupts(struct denali_nand_info *denali) spin_lock_irq(&denali->irq_lock); status = read_interrupt_status(denali); - -#if DEBUG_DENALI - denali->irq_debug_array[denali->idx++] = 0x30000000 | status; - denali->idx %= 32; -#endif + clear_interrupt(denali, status); denali->irq_status = 0x0; spin_unlock_irq(&denali->irq_lock); @@ -676,17 +650,6 @@ static uint32_t read_interrupt_status(struct denali_nand_info *denali) return ioread32(denali->flash_reg + intr_status_reg); } -#if DEBUG_DENALI -static void print_irq_log(struct denali_nand_info *denali) -{ - int i = 0; - - printk(KERN_INFO "ISR debug log index = %X\n", denali->idx); - for (i = 0; i < 32; i++) - printk(KERN_INFO "%08X: %08X\n", i, denali->irq_debug_array[i]); -} -#endif - /* This is the interrupt service routine. It handles all interrupts * sent to this device. Note that on CE4100, this is a shared * interrupt. @@ -707,13 +670,6 @@ static irqreturn_t denali_isr(int irq, void *dev_id) * the interrupt, since this is a shared interrupt */ irq_status = denali_irq_detected(denali); if (irq_status != 0) { -#if DEBUG_DENALI - denali->irq_debug_array[denali->idx++] = - 0x10000000 | irq_status; - denali->idx %= 32; - - printk(KERN_INFO "IRQ status = 0x%04x\n", irq_status); -#endif /* handle interrupt */ /* first acknowledge it */ clear_interrupt(denali, irq_status); @@ -739,41 +695,20 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask) unsigned long timeout = msecs_to_jiffies(1000); do { -#if DEBUG_DENALI - printk(KERN_INFO "waiting for 0x%x\n", irq_mask); -#endif comp_res = wait_for_completion_timeout(&denali->complete, timeout); spin_lock_irq(&denali->irq_lock); intr_status = denali->irq_status; -#if DEBUG_DENALI - denali->irq_debug_array[denali->idx++] = - 0x20000000 | (irq_mask << 16) | intr_status; - denali->idx %= 32; -#endif - if (intr_status & irq_mask) { denali->irq_status &= ~irq_mask; spin_unlock_irq(&denali->irq_lock); -#if DEBUG_DENALI - if (retry) - printk(KERN_INFO "status on retry = 0x%x\n", - intr_status); -#endif /* our interrupt was detected */ break; } else { /* these are not the interrupts you are looking for - * need to wait again */ spin_unlock_irq(&denali->irq_lock); -#if DEBUG_DENALI - print_irq_log(denali); - printk(KERN_INFO "received irq nobody cared:" - " irq_status = 0x%x, irq_mask = 0x%x," - " timeout = %ld\n", intr_status, - irq_mask, comp_res); -#endif retry = true; } } while (comp_res != 0); @@ -789,7 +724,7 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask) } /* This helper function setups the registers for ECC and whether or not - the spare area will be transfered. */ + * the spare area will be transfered. */ static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en, bool transfer_spare) { @@ -800,13 +735,13 @@ static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en, transfer_spare_flag = transfer_spare ? TRANSFER_SPARE_REG__FLAG : 0; /* Enable spare area/ECC per user's request. */ - denali_write32(ecc_en_flag, denali->flash_reg + ECC_ENABLE); - denali_write32(transfer_spare_flag, + iowrite32(ecc_en_flag, denali->flash_reg + ECC_ENABLE); + iowrite32(transfer_spare_flag, denali->flash_reg + TRANSFER_SPARE_REG); } /* sends a pipeline command operation to the controller. See the Denali NAND - controller's user guide for more information (section 4.2.3.6). + * controller's user guide for more information (section 4.2.3.6). */ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en, @@ -827,16 +762,6 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, setup_ecc_for_xfer(denali, ecc_en, transfer_spare); -#if DEBUG_DENALI - spin_lock_irq(&denali->irq_lock); - denali->irq_debug_array[denali->idx++] = - 0x40000000 | ioread32(denali->flash_reg + ECC_ENABLE) | - (access_type << 4); - denali->idx %= 32; - spin_unlock_irq(&denali->irq_lock); -#endif - - /* clear interrupts */ clear_interrupts(denali); @@ -844,14 +769,14 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, if (op == DENALI_WRITE && access_type != SPARE_ACCESS) { cmd = MODE_01 | addr; - denali_write32(cmd, denali->flash_mem); + iowrite32(cmd, denali->flash_mem); } else if (op == DENALI_WRITE && access_type == SPARE_ACCESS) { /* read spare area */ cmd = MODE_10 | addr; index_addr(denali, (uint32_t)cmd, access_type); cmd = MODE_01 | addr; - denali_write32(cmd, denali->flash_mem); + iowrite32(cmd, denali->flash_mem); } else if (op == DENALI_READ) { /* setup page read request for access type */ cmd = MODE_10 | addr; @@ -863,7 +788,7 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, */ if (access_type == SPARE_ACCESS) { cmd = MODE_01 | addr; - denali_write32(cmd, denali->flash_mem); + iowrite32(cmd, denali->flash_mem); } else { index_addr(denali, (uint32_t)cmd, 0x2000 | op | page_count); @@ -875,13 +800,14 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, irq_status = wait_for_irq(denali, irq_mask); if (irq_status == 0) { - printk(KERN_ERR "cmd, page, addr on timeout " - "(0x%x, 0x%x, 0x%x)\n", cmd, - denali->page, addr); + dev_err(&denali->dev->dev, + "cmd, page, addr on timeout " + "(0x%x, 0x%x, 0x%x)\n", + cmd, denali->page, addr); status = FAIL; } else { cmd = MODE_01 | addr; - denali_write32(cmd, denali->flash_mem); + iowrite32(cmd, denali->flash_mem); } } } @@ -902,7 +828,7 @@ static int write_data_to_flash_mem(struct denali_nand_info *denali, /* write the data to the flash memory */ buf32 = (uint32_t *)buf; for (i = 0; i < len / 4; i++) - denali_write32(*buf32++, denali->flash_mem + 0x10); + iowrite32(*buf32++, denali->flash_mem + 0x10); return i*4; /* intent is to return the number of bytes read */ } @@ -945,24 +871,15 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) DENALI_WRITE) == PASS) { write_data_to_flash_mem(denali, buf, mtd->oobsize); -#if DEBUG_DENALI - spin_lock_irq(&denali->irq_lock); - denali->irq_debug_array[denali->idx++] = - 0x80000000 | mtd->oobsize; - denali->idx %= 32; - spin_unlock_irq(&denali->irq_lock); -#endif - - /* wait for operation to complete */ irq_status = wait_for_irq(denali, irq_mask); if (irq_status == 0) { - printk(KERN_ERR "OOB write failed\n"); + dev_err(&denali->dev->dev, "OOB write failed\n"); status = -EIO; } } else { - printk(KERN_ERR "unable to send pipeline command\n"); + dev_err(&denali->dev->dev, "unable to send pipeline command\n"); status = -EIO; } return status; @@ -977,9 +894,6 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) denali->page = page; -#if DEBUG_DENALI - printk(KERN_INFO "read_oob %d\n", page); -#endif if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS, DENALI_READ) == PASS) { read_data_from_flash_mem(denali, buf, mtd->oobsize); @@ -990,7 +904,7 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) irq_status = wait_for_irq(denali, irq_mask); if (irq_status == 0) - printk(KERN_ERR "page on OOB timeout %d\n", + dev_err(&denali->dev->dev, "page on OOB timeout %d\n", denali->page); /* We set the device back to MAIN_ACCESS here as I observed @@ -1002,14 +916,6 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) addr = BANK(denali->flash_bank) | denali->page; cmd = MODE_10 | addr; index_addr(denali, (uint32_t)cmd, MAIN_ACCESS); - -#if DEBUG_DENALI - spin_lock_irq(&denali->irq_lock); - denali->irq_debug_array[denali->idx++] = - 0x60000000 | mtd->oobsize; - denali->idx %= 32; - spin_unlock_irq(&denali->irq_lock); -#endif } } @@ -1029,12 +935,12 @@ bool is_erased(uint8_t *buf, int len) #define ECC_SECTOR(x) (((x) & ECC_ERROR_ADDRESS__SECTOR_NR) >> 12) #define ECC_BYTE(x) (((x) & ECC_ERROR_ADDRESS__OFFSET)) #define ECC_CORRECTION_VALUE(x) ((x) & ERR_CORRECTION_INFO__BYTEMASK) -#define ECC_ERROR_CORRECTABLE(x) (!((x) & ERR_CORRECTION_INFO)) -#define ECC_ERR_DEVICE(x) ((x) & ERR_CORRECTION_INFO__DEVICE_NR >> 8) +#define ECC_ERROR_CORRECTABLE(x) (!((x) & ERR_CORRECTION_INFO__ERROR_TYPE)) +#define ECC_ERR_DEVICE(x) (((x) & ERR_CORRECTION_INFO__DEVICE_NR) >> 8) #define ECC_LAST_ERR(x) ((x) & ERR_CORRECTION_INFO__LAST_ERR_INFO) static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf, - uint8_t *oobbuf, uint32_t irq_status) + uint32_t irq_status) { bool check_erased_page = false; @@ -1043,6 +949,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf, uint32_t err_address = 0, err_correction_info = 0; uint32_t err_byte = 0, err_sector = 0, err_device = 0; uint32_t err_correction_value = 0; + denali_set_intr_modes(denali, false); do { err_address = ioread32(denali->flash_reg + @@ -1050,7 +957,6 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf, err_sector = ECC_SECTOR(err_address); err_byte = ECC_BYTE(err_address); - err_correction_info = ioread32(denali->flash_reg + ERR_CORRECTION_INFO); err_correction_value = @@ -1058,20 +964,23 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf, err_device = ECC_ERR_DEVICE(err_correction_info); if (ECC_ERROR_CORRECTABLE(err_correction_info)) { - /* offset in our buffer is computed as: - sector number * sector size + offset in - sector - */ - int offset = err_sector * ECC_SECTOR_SIZE + - err_byte; - if (offset < denali->mtd.writesize) { + /* If err_byte is larger than ECC_SECTOR_SIZE, + * means error happend in OOB, so we ignore + * it. It's no need for us to correct it + * err_device is represented the NAND error + * bits are happened in if there are more + * than one NAND connected. + * */ + if (err_byte < ECC_SECTOR_SIZE) { + int offset; + offset = (err_sector * + ECC_SECTOR_SIZE + + err_byte) * + denali->devnum + + err_device; /* correct the ECC error */ buf[offset] ^= err_correction_value; denali->mtd.ecc_stats.corrected++; - } else { - /* bummer, couldn't correct the error */ - printk(KERN_ERR "ECC offset invalid\n"); - denali->mtd.ecc_stats.failed++; } } else { /* if the error is not correctable, need to @@ -1080,14 +989,16 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf, * */ check_erased_page = true; } - -#if DEBUG_DENALI - printk(KERN_INFO "Detected ECC error in page %d:" - " err_addr = 0x%08x, info to fix is" - " 0x%08x\n", denali->page, err_address, - err_correction_info); -#endif } while (!ECC_LAST_ERR(err_correction_info)); + /* Once handle all ecc errors, controller will triger + * a ECC_TRANSACTION_DONE interrupt, so here just wait + * for a while for this interrupt + * */ + while (!(read_interrupt_status(denali) & + INTR_STATUS0__ECC_TRANSACTION_DONE)) + cpu_relax(); + clear_interrupts(denali); + denali_set_intr_modes(denali, true); } return check_erased_page; } @@ -1100,7 +1011,7 @@ static void denali_enable_dma(struct denali_nand_info *denali, bool en) if (en) reg_val = DMA_ENABLE__FLAG; - denali_write32(reg_val, denali->flash_reg + DMA_ENABLE); + iowrite32(reg_val, denali->flash_reg + DMA_ENABLE); ioread32(denali->flash_reg + DMA_ENABLE); } @@ -1129,7 +1040,7 @@ static void denali_setup_dma(struct denali_nand_info *denali, int op) } /* writes a page. user specifies type, and this function handles the - configuration details. */ + * configuration details. */ static void write_page(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, bool raw_xfer) { @@ -1171,8 +1082,9 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip, irq_status = wait_for_irq(denali, irq_mask); if (irq_status == 0) { - printk(KERN_ERR "timeout on write_page" - " (type = %d)\n", raw_xfer); + dev_err(&denali->dev->dev, + "timeout on write_page (type = %d)\n", + raw_xfer); denali->status = (irq_status & INTR_STATUS0__PROGRAM_FAIL) ? NAND_STATUS_FAIL : PASS; @@ -1185,8 +1097,9 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip, /* NAND core entry points */ /* this is the callback that the NAND core calls to write a page. Since - writing a page with ECC or without is similar, all the work is done - by write_page above. */ + * writing a page with ECC or without is similar, all the work is done + * by write_page above. + * */ static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf) { @@ -1196,8 +1109,8 @@ static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip, } /* This is the callback that the NAND core calls to write a page without ECC. - raw access is similiar to ECC page writes, so all the work is done in the - write_page() function above. + * raw access is similiar to ECC page writes, so all the work is done in the + * write_page() function above. */ static void denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf) @@ -1236,6 +1149,13 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, INTR_STATUS0__ECC_ERR; bool check_erased_page = false; + if (page != denali->page) { + dev_err(&denali->dev->dev, "IN %s: page %d is not" + " equal to denali->page %d, investigate!!", + __func__, page, denali->page); + BUG(); + } + setup_ecc_for_xfer(denali, true, false); denali_enable_dma(denali, true); @@ -1251,7 +1171,7 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, memcpy(buf, denali->buf.buf, mtd->writesize); - check_erased_page = handle_ecc(denali, buf, chip->oob_poi, irq_status); + check_erased_page = handle_ecc(denali, buf, irq_status); denali_enable_dma(denali, false); if (check_erased_page) { @@ -1280,6 +1200,13 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, uint32_t irq_status = 0; uint32_t irq_mask = INTR_STATUS0__DMA_CMD_COMP; + if (page != denali->page) { + dev_err(&denali->dev->dev, "IN %s: page %d is not" + " equal to denali->page %d, investigate!!", + __func__, page, denali->page); + BUG(); + } + setup_ecc_for_xfer(denali, false, true); denali_enable_dma(denali, true); @@ -1309,18 +1236,13 @@ static uint8_t denali_read_byte(struct mtd_info *mtd) if (denali->buf.head < denali->buf.tail) result = denali->buf.buf[denali->buf.head++]; -#if DEBUG_DENALI - printk(KERN_INFO "read byte -> 0x%02x\n", result); -#endif return result; } static void denali_select_chip(struct mtd_info *mtd, int chip) { struct denali_nand_info *denali = mtd_to_denali(mtd); -#if DEBUG_DENALI - printk(KERN_INFO "denali select chip %d\n", chip); -#endif + spin_lock_irq(&denali->irq_lock); denali->flash_bank = chip; spin_unlock_irq(&denali->irq_lock); @@ -1332,9 +1254,6 @@ static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip) int status = denali->status; denali->status = 0; -#if DEBUG_DENALI - printk(KERN_INFO "waitfunc %d\n", status); -#endif return status; } @@ -1344,9 +1263,6 @@ static void denali_erase(struct mtd_info *mtd, int page) uint32_t cmd = 0x0, irq_status = 0; -#if DEBUG_DENALI - printk(KERN_INFO "erase page: %d\n", page); -#endif /* clear interrupts */ clear_interrupts(denali); @@ -1369,9 +1285,6 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col, uint32_t addr, id; int i; -#if DEBUG_DENALI - printk(KERN_INFO "cmdfunc: 0x%x %d %d\n", cmd, col, page); -#endif switch (cmd) { case NAND_CMD_PAGEPROG: break; @@ -1415,7 +1328,9 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col, static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data, uint8_t *ecc_code) { - printk(KERN_ERR "denali_ecc_calculate called unexpectedly\n"); + struct denali_nand_info *denali = mtd_to_denali(mtd); + dev_err(&denali->dev->dev, + "denali_ecc_calculate called unexpectedly\n"); BUG(); return -EIO; } @@ -1423,14 +1338,18 @@ static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data, static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data, uint8_t *read_ecc, uint8_t *calc_ecc) { - printk(KERN_ERR "denali_ecc_correct called unexpectedly\n"); + struct denali_nand_info *denali = mtd_to_denali(mtd); + dev_err(&denali->dev->dev, + "denali_ecc_correct called unexpectedly\n"); BUG(); return -EIO; } static void denali_ecc_hwctl(struct mtd_info *mtd, int mode) { - printk(KERN_ERR "denali_ecc_hwctl called unexpectedly\n"); + struct denali_nand_info *denali = mtd_to_denali(mtd); + dev_err(&denali->dev->dev, + "denali_ecc_hwctl called unexpectedly\n"); BUG(); } /* end NAND core entry points */ @@ -1445,18 +1364,18 @@ static void denali_hw_init(struct denali_nand_info *denali) * */ denali->bbtskipbytes = ioread32(denali->flash_reg + SPARE_AREA_SKIP_BYTES); - denali_irq_init(denali); denali_nand_reset(denali); - denali_write32(0x0F, denali->flash_reg + RB_PIN_ENABLED); - denali_write32(CHIP_EN_DONT_CARE__FLAG, + iowrite32(0x0F, denali->flash_reg + RB_PIN_ENABLED); + iowrite32(CHIP_EN_DONT_CARE__FLAG, denali->flash_reg + CHIP_ENABLE_DONT_CARE); - denali_write32(0x0, denali->flash_reg + SPARE_AREA_SKIP_BYTES); - denali_write32(0xffff, denali->flash_reg + SPARE_AREA_MARKER); + iowrite32(0xffff, denali->flash_reg + SPARE_AREA_MARKER); /* Should set value for these registers when init */ - denali_write32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES); - denali_write32(1, denali->flash_reg + ECC_ENABLE); + iowrite32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES); + iowrite32(1, denali->flash_reg + ECC_ENABLE); + denali_nand_timing_set(denali); + denali_irq_init(denali); } /* Althogh controller spec said SLC ECC is forceb to be 4bit, @@ -1526,9 +1445,6 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) unsigned long csr_len, mem_len; struct denali_nand_info *denali; - nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n", - __FILE__, __LINE__, __func__); - denali = kzalloc(sizeof(*denali), GFP_KERNEL); if (!denali) return -ENOMEM; @@ -1536,7 +1452,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) ret = pci_enable_device(dev); if (ret) { printk(KERN_ERR "Spectra: pci_enable_device failed.\n"); - goto failed_enable; + goto failed_alloc_memery; } if (id->driver_data == INTEL_CE4100) { @@ -1547,7 +1463,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) printk(KERN_ERR "Intel CE4100 only supports" " ONFI timing mode 1 or below\n"); ret = -EINVAL; - goto failed_enable; + goto failed_enable_dev; } denali->platform = INTEL_CE4100; mem_base = pci_resource_start(dev, 0); @@ -1557,17 +1473,12 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) } else { denali->platform = INTEL_MRST; csr_base = pci_resource_start(dev, 0); - csr_len = pci_resource_start(dev, 0); + csr_len = pci_resource_len(dev, 0); mem_base = pci_resource_start(dev, 1); mem_len = pci_resource_len(dev, 1); if (!mem_len) { mem_base = csr_base + csr_len; mem_len = csr_len; - nand_dbg_print(NAND_DBG_WARN, - "Spectra: No second" - " BAR for PCI device;" - " assuming %08Lx\n", - (uint64_t)csr_base); } } @@ -1576,7 +1487,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) if (ret) { printk(KERN_ERR "Spectra: no usable DMA configuration\n"); - goto failed_enable; + goto failed_enable_dev; } denali->buf.dma_buf = pci_map_single(dev, denali->buf.buf, @@ -1584,50 +1495,44 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) PCI_DMA_BIDIRECTIONAL); if (pci_dma_mapping_error(dev, denali->buf.dma_buf)) { - printk(KERN_ERR "Spectra: failed to map DMA buffer\n"); - goto failed_enable; + dev_err(&dev->dev, "Spectra: failed to map DMA buffer\n"); + goto failed_enable_dev; } pci_set_master(dev); denali->dev = dev; + denali->mtd.dev.parent = &dev->dev; ret = pci_request_regions(dev, DENALI_NAND_NAME); if (ret) { printk(KERN_ERR "Spectra: Unable to request memory regions\n"); - goto failed_req_csr; + goto failed_dma_map; } denali->flash_reg = ioremap_nocache(csr_base, csr_len); if (!denali->flash_reg) { printk(KERN_ERR "Spectra: Unable to remap memory region\n"); ret = -ENOMEM; - goto failed_remap_csr; + goto failed_req_regions; } - nand_dbg_print(NAND_DBG_DEBUG, "Spectra: CSR 0x%08Lx -> 0x%p (0x%lx)\n", - (uint64_t)csr_base, denali->flash_reg, csr_len); denali->flash_mem = ioremap_nocache(mem_base, mem_len); if (!denali->flash_mem) { printk(KERN_ERR "Spectra: ioremap_nocache failed!"); - iounmap(denali->flash_reg); ret = -ENOMEM; - goto failed_remap_csr; + goto failed_remap_reg; } - nand_dbg_print(NAND_DBG_WARN, - "Spectra: Remapped flash base address: " - "0x%p, len: %ld\n", - denali->flash_mem, csr_len); - denali_hw_init(denali); denali_drv_init(denali); - nand_dbg_print(NAND_DBG_DEBUG, "Spectra: IRQ %d\n", dev->irq); + /* denali_isr register is done after all the hardware + * initilization is finished*/ if (request_irq(dev->irq, denali_isr, IRQF_SHARED, DENALI_NAND_NAME, denali)) { printk(KERN_ERR "Spectra: Unable to allocate IRQ\n"); ret = -ENODEV; - goto failed_request_irq; + goto failed_remap_mem; } /* now that our ISR is registered, we can enable interrupts */ @@ -1635,21 +1540,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) pci_set_drvdata(dev, denali); - denali_nand_timing_set(denali); - - nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:" - "acc_clks: %d, re_2_we: %d, we_2_re: %d," - "addr_2_data: %d, rdwr_en_lo_cnt: %d, " - "rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n", - ioread32(denali->flash_reg + ACC_CLKS), - ioread32(denali->flash_reg + RE_2_WE), - ioread32(denali->flash_reg + WE_2_RE), - ioread32(denali->flash_reg + ADDR_2_DATA), - ioread32(denali->flash_reg + RDWR_EN_LO_CNT), - ioread32(denali->flash_reg + RDWR_EN_HI_CNT), - ioread32(denali->flash_reg + CS_SETUP_CNT)); - - denali->mtd.name = "Denali NAND"; + denali->mtd.name = "denali-nand"; denali->mtd.owner = THIS_MODULE; denali->mtd.priv = &denali->nand; @@ -1664,7 +1555,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) * with the nand subsystem */ if (nand_scan_ident(&denali->mtd, LLD_MAX_FLASH_BANKS, NULL)) { ret = -ENXIO; - goto failed_nand; + goto failed_req_irq; } /* MTD supported page sizes vary by kernel. We validate our @@ -1674,7 +1565,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) ret = -ENODEV; printk(KERN_ERR "Spectra: device size not supported by this " "version of MTD."); - goto failed_nand; + goto failed_req_irq; } /* support for multi nand @@ -1719,17 +1610,17 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) /* if MLC OOB size is large enough, use 15bit ECC*/ denali->nand.ecc.layout = &nand_15bit_oob; denali->nand.ecc.bytes = ECC_15BITS; - denali_write32(15, denali->flash_reg + ECC_CORRECTION); + iowrite32(15, denali->flash_reg + ECC_CORRECTION); } else if (denali->mtd.oobsize < (denali->bbtskipbytes + ECC_8BITS * (denali->mtd.writesize / ECC_SECTOR_SIZE))) { printk(KERN_ERR "Your NAND chip OOB is not large enough to" " contain 8bit ECC correction codes"); - goto failed_nand; + goto failed_req_irq; } else { denali->nand.ecc.layout = &nand_8bit_oob; denali->nand.ecc.bytes = ECC_8BITS; - denali_write32(8, denali->flash_reg + ECC_CORRECTION); + iowrite32(8, denali->flash_reg + ECC_CORRECTION); } denali->nand.ecc.bytes *= denali->devnum; @@ -1769,28 +1660,31 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) if (nand_scan_tail(&denali->mtd)) { ret = -ENXIO; - goto failed_nand; + goto failed_req_irq; } ret = add_mtd_device(&denali->mtd); if (ret) { - printk(KERN_ERR "Spectra: Failed to register" - " MTD device: %d\n", ret); - goto failed_nand; + dev_err(&dev->dev, "Spectra: Failed to register MTD: %d\n", + ret); + goto failed_req_irq; } return 0; - failed_nand: +failed_req_irq: denali_irq_cleanup(dev->irq, denali); - failed_request_irq: - iounmap(denali->flash_reg); +failed_remap_mem: iounmap(denali->flash_mem); - failed_remap_csr: +failed_remap_reg: + iounmap(denali->flash_reg); +failed_req_regions: pci_release_regions(dev); - failed_req_csr: +failed_dma_map: pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE, PCI_DMA_BIDIRECTIONAL); - failed_enable: +failed_enable_dev: + pci_disable_device(dev); +failed_alloc_memery: kfree(denali); return ret; } @@ -1800,9 +1694,6 @@ static void denali_pci_remove(struct pci_dev *dev) { struct denali_nand_info *denali = pci_get_drvdata(dev); - nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n", - __FILE__, __LINE__, __func__); - nand_release(&denali->mtd); del_mtd_device(&denali->mtd); |