diff options
author | David Howells <dhowells@redhat.com> | 2006-12-05 14:37:56 (GMT) |
---|---|---|
committer | David Howells <dhowells@warthog.cambridge.redhat.com> | 2006-12-05 14:37:56 (GMT) |
commit | 4c1ac1b49122b805adfa4efc620592f68dccf5db (patch) | |
tree | 87557f4bc2fd4fe65b7570489c2f610c45c0adcd /drivers/net/e1000 | |
parent | c4028958b6ecad064b1a6303a6a5906d4fe48d73 (diff) | |
parent | d916faace3efc0bf19fe9a615a1ab8fa1a24cd93 (diff) | |
download | linux-4c1ac1b49122b805adfa4efc620592f68dccf5db.tar.xz |
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:
drivers/infiniband/core/iwcm.c
drivers/net/chelsio/cxgb2.c
drivers/net/wireless/bcm43xx/bcm43xx_main.c
drivers/net/wireless/prism54/islpci_eth.c
drivers/usb/core/hub.h
drivers/usb/input/hid-core.c
net/core/netpoll.c
Fix up merge failures with Linus's head and fix new compilation failures.
Signed-Off-By: David Howells <dhowells@redhat.com>
Diffstat (limited to 'drivers/net/e1000')
-rw-r--r-- | drivers/net/e1000/e1000.h | 17 | ||||
-rw-r--r-- | drivers/net/e1000/e1000_ethtool.c | 36 | ||||
-rw-r--r-- | drivers/net/e1000/e1000_hw.c | 139 | ||||
-rw-r--r-- | drivers/net/e1000/e1000_hw.h | 90 | ||||
-rw-r--r-- | drivers/net/e1000/e1000_main.c | 490 | ||||
-rw-r--r-- | drivers/net/e1000/e1000_osdep.h | 9 | ||||
-rw-r--r-- | drivers/net/e1000/e1000_param.c | 98 |
7 files changed, 583 insertions, 296 deletions
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 7ecce43..f091042 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -59,6 +59,9 @@ #include <linux/capability.h> #include <linux/in.h> #include <linux/ip.h> +#ifdef NETIF_F_TSO6 +#include <linux/ipv6.h> +#endif #include <linux/tcp.h> #include <linux/udp.h> #include <net/pkt_sched.h> @@ -254,6 +257,17 @@ struct e1000_adapter { spinlock_t tx_queue_lock; #endif atomic_t irq_sem; + unsigned int detect_link; + unsigned int total_tx_bytes; + unsigned int total_tx_packets; + unsigned int total_rx_bytes; + unsigned int total_rx_packets; + /* Interrupt Throttle Rate */ + uint32_t itr; + uint32_t itr_setting; + uint16_t tx_itr; + uint16_t rx_itr; + struct work_struct reset_task; uint8_t fc_autoneg; @@ -262,6 +276,7 @@ struct e1000_adapter { /* TX */ struct e1000_tx_ring *tx_ring; /* One per active queue */ + unsigned int restart_queue; unsigned long tx_queue_len; uint32_t txd_cmd; uint32_t tx_int_delay; @@ -310,8 +325,6 @@ struct e1000_adapter { uint64_t gorcl_old; uint16_t rx_ps_bsize0; - /* Interrupt Throttle Rate */ - uint32_t itr; /* OS defined structs */ struct net_device *netdev; diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index c564adb..da459f7 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -85,6 +85,7 @@ static const struct e1000_stats e1000_gstrings_stats[] = { { "tx_single_coll_ok", E1000_STAT(stats.scc) }, { "tx_multi_coll_ok", E1000_STAT(stats.mcc) }, { "tx_timeout_count", E1000_STAT(tx_timeout_count) }, + { "tx_restart_queue", E1000_STAT(restart_queue) }, { "rx_long_length_errors", E1000_STAT(stats.roc) }, { "rx_short_length_errors", E1000_STAT(stats.ruc) }, { "rx_align_errors", E1000_STAT(stats.algnerrc) }, @@ -133,9 +134,7 @@ e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) if (hw->autoneg == 1) { ecmd->advertising |= ADVERTISED_Autoneg; - /* the e1000 autoneg seems to match ethtool nicely */ - ecmd->advertising |= hw->autoneg_advertised; } @@ -285,7 +284,7 @@ e1000_set_pauseparam(struct net_device *netdev, e1000_reset(adapter); } else retval = ((hw->media_type == e1000_media_type_fiber) ? - e1000_setup_link(hw) : e1000_force_mac_fc(hw)); + e1000_setup_link(hw) : e1000_force_mac_fc(hw)); clear_bit(__E1000_RESETTING, &adapter->flags); return retval; @@ -350,6 +349,13 @@ e1000_set_tso(struct net_device *netdev, uint32_t data) else netdev->features &= ~NETIF_F_TSO; +#ifdef NETIF_F_TSO6 + if (data) + netdev->features |= NETIF_F_TSO6; + else + netdev->features &= ~NETIF_F_TSO6; +#endif + DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled"); adapter->tso_force = TRUE; return 0; @@ -774,7 +780,7 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) /* The status register is Read Only, so a write should fail. * Some bits that get toggled are ignored. */ - switch (adapter->hw.mac_type) { + switch (adapter->hw.mac_type) { /* there are several bits on newer hardware that are r/w */ case e1000_82571: case e1000_82572: @@ -802,12 +808,14 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) } /* restore previous status */ E1000_WRITE_REG(&adapter->hw, STATUS, before); + if (adapter->hw.mac_type != e1000_ich8lan) { REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF); REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF); REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF); REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF); } + REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF); REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF); REG_PATTERN_TEST(RDLEN, 0x000FFF80, 0x000FFFFF); @@ -820,8 +828,9 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) REG_PATTERN_TEST(TDLEN, 0x000FFF80, 0x000FFFFF); REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000); + before = (adapter->hw.mac_type == e1000_ich8lan ? - 0x06C3B33E : 0x06DFB3FE); + 0x06C3B33E : 0x06DFB3FE); REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB); REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000); @@ -834,10 +843,10 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF); REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF); value = (adapter->hw.mac_type == e1000_ich8lan ? - E1000_RAR_ENTRIES_ICH8LAN : E1000_RAR_ENTRIES); + E1000_RAR_ENTRIES_ICH8LAN : E1000_RAR_ENTRIES); for (i = 0; i < value; i++) { REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF, - 0xFFFFFFFF); + 0xFFFFFFFF); } } else { @@ -883,8 +892,7 @@ e1000_eeprom_test(struct e1000_adapter *adapter, uint64_t *data) } static irqreturn_t -e1000_test_intr(int irq, - void *data) +e1000_test_intr(int irq, void *data) { struct net_device *netdev = (struct net_device *) data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -905,11 +913,11 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) /* NOTE: we don't test MSI interrupts here, yet */ /* Hook up test interrupt handler just for this test */ - if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED, - netdev->name, netdev)) + if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED, netdev->name, + netdev)) shared_int = FALSE; else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED, - netdev->name, netdev)) { + netdev->name, netdev)) { *data = 1; return -1; } @@ -925,6 +933,7 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) if (adapter->hw.mac_type == e1000_ich8lan && i == 8) continue; + /* Interrupt to test */ mask = 1 << i; @@ -1674,7 +1683,7 @@ e1000_diag_test(struct net_device *netdev, if (e1000_link_test(adapter, &data[4])) eth_test->flags |= ETH_TEST_FL_FAILED; - /* Offline tests aren't run; pass by default */ + /* Online tests aren't run; pass by default */ data[0] = 0; data[1] = 0; data[2] = 0; @@ -1717,6 +1726,7 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter, struct ethtool_wol retval = 0; break; case E1000_DEV_ID_82571EB_QUAD_COPPER: + case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE: case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: /* quad port adapters only support WoL on port A */ if (!adapter->quad_port_a) { diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 65077f3..3655d90 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -385,6 +385,7 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82571EB_FIBER: case E1000_DEV_ID_82571EB_SERDES: case E1000_DEV_ID_82571EB_QUAD_COPPER: + case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE: hw->mac_type = e1000_82571; break; case E1000_DEV_ID_82572EI_COPPER: @@ -408,6 +409,8 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_ICH8_IGP_AMT: case E1000_DEV_ID_ICH8_IGP_C: case E1000_DEV_ID_ICH8_IFE: + case E1000_DEV_ID_ICH8_IFE_GT: + case E1000_DEV_ID_ICH8_IFE_G: case E1000_DEV_ID_ICH8_IGP_M: hw->mac_type = e1000_ich8lan; break; @@ -2367,6 +2370,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) /* Need to reset the PHY or these changes will be ignored */ mii_ctrl_reg |= MII_CR_RESET; + /* Disable MDI-X support for 10/100 */ } else if (hw->phy_type == e1000_phy_ife) { ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data); @@ -2379,6 +2383,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) ret_val = e1000_write_phy_reg(hw, IFE_PHY_MDIX_CONTROL, phy_data); if (ret_val) return ret_val; + } else { /* Clear Auto-Crossover to force MDI manually. IGP requires MDI * forced whenever speed or duplex are forced. @@ -3868,7 +3873,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code * -* Sets bit 15 of the MII Control regiser +* Sets bit 15 of the MII Control register ******************************************************************************/ int32_t e1000_phy_reset(struct e1000_hw *hw) @@ -3940,14 +3945,15 @@ e1000_phy_powerdown_workaround(struct e1000_hw *hw) E1000_WRITE_REG(hw, PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE | E1000_PHY_CTRL_NOND0A_GBE_DISABLE); - /* Write VR power-down enable */ + /* Write VR power-down enable - bits 9:8 should be 10b */ e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data); - e1000_write_phy_reg(hw, IGP3_VR_CTRL, phy_data | - IGP3_VR_CTRL_MODE_SHUT); + phy_data |= (1 << 9); + phy_data &= ~(1 << 8); + e1000_write_phy_reg(hw, IGP3_VR_CTRL, phy_data); /* Read it back and test */ e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data); - if ((phy_data & IGP3_VR_CTRL_MODE_SHUT) || retry) + if (((phy_data & IGP3_VR_CTRL_MODE_MASK) == IGP3_VR_CTRL_MODE_SHUT) || retry) break; /* Issue PHY reset and repeat at most one more time */ @@ -4549,7 +4555,7 @@ e1000_init_eeprom_params(struct e1000_hw *hw) case e1000_ich8lan: { int32_t i = 0; - uint32_t flash_size = E1000_READ_ICH8_REG(hw, ICH8_FLASH_GFPREG); + uint32_t flash_size = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_GFPREG); eeprom->type = e1000_eeprom_ich8; eeprom->use_eerd = FALSE; @@ -4565,12 +4571,14 @@ e1000_init_eeprom_params(struct e1000_hw *hw) } } - hw->flash_base_addr = (flash_size & ICH8_GFPREG_BASE_MASK) * - ICH8_FLASH_SECTOR_SIZE; + hw->flash_base_addr = (flash_size & ICH_GFPREG_BASE_MASK) * + ICH_FLASH_SECTOR_SIZE; + + hw->flash_bank_size = ((flash_size >> 16) & ICH_GFPREG_BASE_MASK) + 1; + hw->flash_bank_size -= (flash_size & ICH_GFPREG_BASE_MASK); + + hw->flash_bank_size *= ICH_FLASH_SECTOR_SIZE; - hw->flash_bank_size = ((flash_size >> 16) & ICH8_GFPREG_BASE_MASK) + 1; - hw->flash_bank_size -= (flash_size & ICH8_GFPREG_BASE_MASK); - hw->flash_bank_size *= ICH8_FLASH_SECTOR_SIZE; hw->flash_bank_size /= 2 * sizeof(uint16_t); break; @@ -5620,8 +5628,8 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) * signature is valid. We want to do this after the write * has completed so that we don't mark the segment valid * while the write is still in progress */ - if (i == E1000_ICH8_NVM_SIG_WORD) - high_byte = E1000_ICH8_NVM_SIG_MASK | high_byte; + if (i == E1000_ICH_NVM_SIG_WORD) + high_byte = E1000_ICH_NVM_SIG_MASK | high_byte; error = e1000_verify_write_ich8_byte(hw, (i << 1) + new_bank_offset + 1, high_byte); @@ -5643,18 +5651,18 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) * erase as well since these bits are 11 to start with * and we need to change bit 14 to 0b */ e1000_read_ich8_byte(hw, - E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset, + E1000_ICH_NVM_SIG_WORD * 2 + 1 + new_bank_offset, &high_byte); high_byte &= 0xBF; error = e1000_verify_write_ich8_byte(hw, - E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset, high_byte); + E1000_ICH_NVM_SIG_WORD * 2 + 1 + new_bank_offset, high_byte); /* And invalidate the previously valid segment by setting * its signature word (0x13) high_byte to 0b. This can be * done without an erase because flash erase sets all bits * to 1's. We can write 1's to 0's without an erase */ if (error == E1000_SUCCESS) { error = e1000_verify_write_ich8_byte(hw, - E1000_ICH8_NVM_SIG_WORD * 2 + 1 + old_bank_offset, 0); + E1000_ICH_NVM_SIG_WORD * 2 + 1 + old_bank_offset, 0); } /* Clear the now not used entry in the cache */ @@ -5841,6 +5849,7 @@ e1000_mta_set(struct e1000_hw *hw, hash_reg = (hash_value >> 5) & 0x7F; if (hw->mac_type == e1000_ich8lan) hash_reg &= 0x1F; + hash_bit = hash_value & 0x1F; mta = E1000_READ_REG_ARRAY(hw, MTA, hash_reg); @@ -6026,6 +6035,7 @@ e1000_id_led_init(struct e1000_hw * hw) else eeprom_data = ID_LED_DEFAULT; } + for (i = 0; i < 4; i++) { temp = (eeprom_data >> (i << 2)) & led_mask; switch (temp) { @@ -8486,7 +8496,7 @@ e1000_ich8_cycle_init(struct e1000_hw *hw) DEBUGFUNC("e1000_ich8_cycle_init"); - hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); /* May be check the Flash Des Valid bit in Hw status */ if (hsfsts.hsf_status.fldesvalid == 0) { @@ -8499,7 +8509,7 @@ e1000_ich8_cycle_init(struct e1000_hw *hw) hsfsts.hsf_status.flcerr = 1; hsfsts.hsf_status.dael = 1; - E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval); + E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval); /* Either we should have a hardware SPI cycle in progress bit to check * against, in order to start a new cycle or FDONE bit should be changed @@ -8514,13 +8524,13 @@ e1000_ich8_cycle_init(struct e1000_hw *hw) /* There is no cycle running at present, so we can start a cycle */ /* Begin by setting Flash Cycle Done. */ hsfsts.hsf_status.flcdone = 1; - E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval); + E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval); error = E1000_SUCCESS; } else { /* otherwise poll for sometime so the current cycle has a chance * to end before giving up. */ - for (i = 0; i < ICH8_FLASH_COMMAND_TIMEOUT; i++) { - hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + for (i = 0; i < ICH_FLASH_COMMAND_TIMEOUT; i++) { + hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); if (hsfsts.hsf_status.flcinprog == 0) { error = E1000_SUCCESS; break; @@ -8531,7 +8541,7 @@ e1000_ich8_cycle_init(struct e1000_hw *hw) /* Successful in waiting for previous cycle to timeout, * now set the Flash Cycle Done. */ hsfsts.hsf_status.flcdone = 1; - E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval); + E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval); } else { DEBUGOUT("Flash controller busy, cannot get access"); } @@ -8553,13 +8563,13 @@ e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout) uint32_t i = 0; /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */ - hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL); + hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL); hsflctl.hsf_ctrl.flcgo = 1; - E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval); + E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); /* wait till FDONE bit is set to 1 */ do { - hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); if (hsfsts.hsf_status.flcdone == 1) break; udelay(1); @@ -8593,10 +8603,10 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, DEBUGFUNC("e1000_read_ich8_data"); if (size < 1 || size > 2 || data == 0x0 || - index > ICH8_FLASH_LINEAR_ADDR_MASK) + index > ICH_FLASH_LINEAR_ADDR_MASK) return error; - flash_linear_address = (ICH8_FLASH_LINEAR_ADDR_MASK & index) + + flash_linear_address = (ICH_FLASH_LINEAR_ADDR_MASK & index) + hw->flash_base_addr; do { @@ -8606,25 +8616,25 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, if (error != E1000_SUCCESS) break; - hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL); + hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL); /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ hsflctl.hsf_ctrl.fldbcount = size - 1; - hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_READ; - E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval); + hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ; + E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); /* Write the last 24 bits of index into Flash Linear address field in * Flash Address */ /* TODO: TBD maybe check the index against the size of flash */ - E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address); + E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address); - error = e1000_ich8_flash_cycle(hw, ICH8_FLASH_COMMAND_TIMEOUT); + error = e1000_ich8_flash_cycle(hw, ICH_FLASH_COMMAND_TIMEOUT); /* Check if FCERR is set to 1, if set to 1, clear it and try the whole * sequence a few more times, else read in (shift in) the Flash Data0, * the order is least significant byte first msb to lsb */ if (error == E1000_SUCCESS) { - flash_data = E1000_READ_ICH8_REG(hw, ICH8_FLASH_FDATA0); + flash_data = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_FDATA0); if (size == 1) { *data = (uint8_t)(flash_data & 0x000000FF); } else if (size == 2) { @@ -8634,9 +8644,9 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, } else { /* If we've gotten here, then things are probably completely hosed, * but if the error condition is detected, it won't hurt to give - * it another try...ICH8_FLASH_CYCLE_REPEAT_COUNT times. + * it another try...ICH_FLASH_CYCLE_REPEAT_COUNT times. */ - hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); if (hsfsts.hsf_status.flcerr == 1) { /* Repeat for some time before giving up. */ continue; @@ -8645,7 +8655,7 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, break; } } - } while (count++ < ICH8_FLASH_CYCLE_REPEAT_COUNT); + } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); return error; } @@ -8672,10 +8682,10 @@ e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, DEBUGFUNC("e1000_write_ich8_data"); if (size < 1 || size > 2 || data > size * 0xff || - index > ICH8_FLASH_LINEAR_ADDR_MASK) + index > ICH_FLASH_LINEAR_ADDR_MASK) return error; - flash_linear_address = (ICH8_FLASH_LINEAR_ADDR_MASK & index) + + flash_linear_address = (ICH_FLASH_LINEAR_ADDR_MASK & index) + hw->flash_base_addr; do { @@ -8685,34 +8695,34 @@ e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, if (error != E1000_SUCCESS) break; - hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL); + hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL); /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ hsflctl.hsf_ctrl.fldbcount = size -1; - hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_WRITE; - E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval); + hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE; + E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); /* Write the last 24 bits of index into Flash Linear address field in * Flash Address */ - E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address); + E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address); if (size == 1) flash_data = (uint32_t)data & 0x00FF; else flash_data = (uint32_t)data; - E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FDATA0, flash_data); + E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FDATA0, flash_data); /* check if FCERR is set to 1 , if set to 1, clear it and try the whole * sequence a few more times else done */ - error = e1000_ich8_flash_cycle(hw, ICH8_FLASH_COMMAND_TIMEOUT); + error = e1000_ich8_flash_cycle(hw, ICH_FLASH_COMMAND_TIMEOUT); if (error == E1000_SUCCESS) { break; } else { /* If we're here, then things are most likely completely hosed, * but if the error condition is detected, it won't hurt to give - * it another try...ICH8_FLASH_CYCLE_REPEAT_COUNT times. + * it another try...ICH_FLASH_CYCLE_REPEAT_COUNT times. */ - hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); if (hsfsts.hsf_status.flcerr == 1) { /* Repeat for some time before giving up. */ continue; @@ -8721,7 +8731,7 @@ e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, break; } } - } while (count++ < ICH8_FLASH_CYCLE_REPEAT_COUNT); + } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); return error; } @@ -8840,7 +8850,7 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank) int32_t j = 0; int32_t error_flag = 0; - hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); /* Determine HW Sector size: Read BERASE bits of Hw flash Status register */ /* 00: The Hw sector is 256 bytes, hence we need to erase 16 @@ -8853,19 +8863,14 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank) * 11: The Hw sector size is 64K bytes */ if (hsfsts.hsf_status.berasesz == 0x0) { /* Hw sector size 256 */ - sub_sector_size = ICH8_FLASH_SEG_SIZE_256; - bank_size = ICH8_FLASH_SECTOR_SIZE; - iteration = ICH8_FLASH_SECTOR_SIZE / ICH8_FLASH_SEG_SIZE_256; + sub_sector_size = ICH_FLASH_SEG_SIZE_256; + bank_size = ICH_FLASH_SECTOR_SIZE; + iteration = ICH_FLASH_SECTOR_SIZE / ICH_FLASH_SEG_SIZE_256; } else if (hsfsts.hsf_status.berasesz == 0x1) { - bank_size = ICH8_FLASH_SEG_SIZE_4K; - iteration = 1; - } else if (hw->mac_type != e1000_ich8lan && - hsfsts.hsf_status.berasesz == 0x2) { - /* 8K erase size invalid for ICH8 - added in for ICH9 */ - bank_size = ICH9_FLASH_SEG_SIZE_8K; + bank_size = ICH_FLASH_SEG_SIZE_4K; iteration = 1; } else if (hsfsts.hsf_status.berasesz == 0x3) { - bank_size = ICH8_FLASH_SEG_SIZE_64K; + bank_size = ICH_FLASH_SEG_SIZE_64K; iteration = 1; } else { return error; @@ -8883,9 +8888,9 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank) /* Write a value 11 (block Erase) in Flash Cycle field in Hw flash * Control */ - hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL); - hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_ERASE; - E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval); + hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL); + hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE; + E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); /* Write the last 24 bits of an index within the block into Flash * Linear address field in Flash Address. This probably needs to @@ -8893,17 +8898,17 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank) * the software bank size (4, 8 or 64 KBytes) */ flash_linear_address = bank * bank_size + j * sub_sector_size; flash_linear_address += hw->flash_base_addr; - flash_linear_address &= ICH8_FLASH_LINEAR_ADDR_MASK; + flash_linear_address &= ICH_FLASH_LINEAR_ADDR_MASK; - E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address); + E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address); - error = e1000_ich8_flash_cycle(hw, ICH8_FLASH_ERASE_TIMEOUT); + error = e1000_ich8_flash_cycle(hw, ICH_FLASH_ERASE_TIMEOUT); /* Check if FCERR is set to 1. If 1, clear it and try the whole * sequence a few more times else Done */ if (error == E1000_SUCCESS) { break; } else { - hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); if (hsfsts.hsf_status.flcerr == 1) { /* repeat for some time before giving up */ continue; @@ -8912,7 +8917,7 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank) break; } } - } while ((count < ICH8_FLASH_CYCLE_REPEAT_COUNT) && !error_flag); + } while ((count < ICH_FLASH_CYCLE_REPEAT_COUNT) && !error_flag); if (error_flag == 1) break; } @@ -9013,5 +9018,3 @@ e1000_init_lcd_from_nvm(struct e1000_hw *hw) return E1000_SUCCESS; } - - diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index 449a603..3321fb1 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -128,11 +128,13 @@ typedef enum { /* PCI bus widths */ typedef enum { e1000_bus_width_unknown = 0, + /* These PCIe values should literally match the possible return values + * from config space */ + e1000_bus_width_pciex_1 = 1, + e1000_bus_width_pciex_2 = 2, + e1000_bus_width_pciex_4 = 4, e1000_bus_width_32, e1000_bus_width_64, - e1000_bus_width_pciex_1, - e1000_bus_width_pciex_2, - e1000_bus_width_pciex_4, e1000_bus_width_reserved } e1000_bus_width; @@ -326,6 +328,7 @@ int32_t e1000_phy_hw_reset(struct e1000_hw *hw); int32_t e1000_phy_reset(struct e1000_hw *hw); int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); int32_t e1000_validate_mdi_setting(struct e1000_hw *hw); + void e1000_phy_powerdown_workaround(struct e1000_hw *hw); /* EEPROM Functions */ @@ -390,7 +393,6 @@ int32_t e1000_mng_write_dhcp_info(struct e1000_hw *hw, uint8_t *buffer, uint16_t length); boolean_t e1000_check_mng_mode(struct e1000_hw *hw); boolean_t e1000_enable_tx_pkt_filtering(struct e1000_hw *hw); - int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data); int32_t e1000_validate_eeprom_checksum(struct e1000_hw *hw); int32_t e1000_update_eeprom_checksum(struct e1000_hw *hw); @@ -473,6 +475,7 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); #define E1000_DEV_ID_82571EB_FIBER 0x105F #define E1000_DEV_ID_82571EB_SERDES 0x1060 #define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4 +#define E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE 0x10BC #define E1000_DEV_ID_82572EI_COPPER 0x107D #define E1000_DEV_ID_82572EI_FIBER 0x107E #define E1000_DEV_ID_82572EI_SERDES 0x107F @@ -490,6 +493,8 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); #define E1000_DEV_ID_ICH8_IGP_AMT 0x104A #define E1000_DEV_ID_ICH8_IGP_C 0x104B #define E1000_DEV_ID_ICH8_IFE 0x104C +#define E1000_DEV_ID_ICH8_IFE_GT 0x10C4 +#define E1000_DEV_ID_ICH8_IFE_G 0x10C5 #define E1000_DEV_ID_ICH8_IGP_M 0x104D @@ -576,6 +581,7 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); * E1000_RAR_ENTRIES - 1 multicast addresses. */ #define E1000_RAR_ENTRIES 15 + #define E1000_RAR_ENTRIES_ICH8LAN 6 #define MIN_NUMBER_OF_DESCRIPTORS 8 @@ -1335,9 +1341,9 @@ struct e1000_hw_stats { uint64_t gotch; uint64_t rnbc; uint64_t ruc; + uint64_t rfc; uint64_t roc; uint64_t rlerrc; - uint64_t rfc; uint64_t rjc; uint64_t mgprc; uint64_t mgpdc; @@ -1577,8 +1583,8 @@ struct e1000_hw { #define E1000_HICR_FW_RESET 0xC0 #define E1000_SHADOW_RAM_WORDS 2048 -#define E1000_ICH8_NVM_SIG_WORD 0x13 -#define E1000_ICH8_NVM_SIG_MASK 0xC0 +#define E1000_ICH_NVM_SIG_WORD 0x13 +#define E1000_ICH_NVM_SIG_MASK 0xC0 /* EEPROM Read */ #define E1000_EERD_START 0x00000001 /* Start Read */ @@ -3172,6 +3178,7 @@ struct e1000_host_command_info { #define IGP3_VR_CTRL \ PHY_REG(776, 18) /* Voltage regulator control register */ #define IGP3_VR_CTRL_MODE_SHUT 0x0200 /* Enter powerdown, shutdown VRs */ +#define IGP3_VR_CTRL_MODE_MASK 0x0300 /* Shutdown VR Mask */ #define IGP3_CAPABILITY \ PHY_REG(776, 19) /* IGP3 Capability Register */ @@ -3256,41 +3263,40 @@ struct e1000_host_command_info { #define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */ #define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */ -#define ICH8_FLASH_COMMAND_TIMEOUT 5000 /* 5000 uSecs - adjusted */ -#define ICH8_FLASH_ERASE_TIMEOUT 3000000 /* Up to 3 seconds - worst case */ -#define ICH8_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles */ -#define ICH8_FLASH_SEG_SIZE_256 256 -#define ICH8_FLASH_SEG_SIZE_4K 4096 -#define ICH9_FLASH_SEG_SIZE_8K 8192 -#define ICH8_FLASH_SEG_SIZE_64K 65536 - -#define ICH8_CYCLE_READ 0x0 -#define ICH8_CYCLE_RESERVED 0x1 -#define ICH8_CYCLE_WRITE 0x2 -#define ICH8_CYCLE_ERASE 0x3 - -#define ICH8_FLASH_GFPREG 0x0000 -#define ICH8_FLASH_HSFSTS 0x0004 -#define ICH8_FLASH_HSFCTL 0x0006 -#define ICH8_FLASH_FADDR 0x0008 -#define ICH8_FLASH_FDATA0 0x0010 -#define ICH8_FLASH_FRACC 0x0050 -#define ICH8_FLASH_FREG0 0x0054 -#define ICH8_FLASH_FREG1 0x0058 -#define ICH8_FLASH_FREG2 0x005C -#define ICH8_FLASH_FREG3 0x0060 -#define ICH8_FLASH_FPR0 0x0074 -#define ICH8_FLASH_FPR1 0x0078 -#define ICH8_FLASH_SSFSTS 0x0090 -#define ICH8_FLASH_SSFCTL 0x0092 -#define ICH8_FLASH_PREOP 0x0094 -#define ICH8_FLASH_OPTYPE 0x0096 -#define ICH8_FLASH_OPMENU 0x0098 - -#define ICH8_FLASH_REG_MAPSIZE 0x00A0 -#define ICH8_FLASH_SECTOR_SIZE 4096 -#define ICH8_GFPREG_BASE_MASK 0x1FFF -#define ICH8_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF +#define ICH_FLASH_COMMAND_TIMEOUT 5000 /* 5000 uSecs - adjusted */ +#define ICH_FLASH_ERASE_TIMEOUT 3000000 /* Up to 3 seconds - worst case */ +#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles */ +#define ICH_FLASH_SEG_SIZE_256 256 +#define ICH_FLASH_SEG_SIZE_4K 4096 +#define ICH_FLASH_SEG_SIZE_64K 65536 + +#define ICH_CYCLE_READ 0x0 +#define ICH_CYCLE_RESERVED 0x1 +#define ICH_CYCLE_WRITE 0x2 +#define ICH_CYCLE_ERASE 0x3 + +#define ICH_FLASH_GFPREG 0x0000 +#define ICH_FLASH_HSFSTS 0x0004 +#define ICH_FLASH_HSFCTL 0x0006 +#define ICH_FLASH_FADDR 0x0008 +#define ICH_FLASH_FDATA0 0x0010 +#define ICH_FLASH_FRACC 0x0050 +#define ICH_FLASH_FREG0 0x0054 +#define ICH_FLASH_FREG1 0x0058 +#define ICH_FLASH_FREG2 0x005C +#define ICH_FLASH_FREG3 0x0060 +#define ICH_FLASH_FPR0 0x0074 +#define ICH_FLASH_FPR1 0x0078 +#define ICH_FLASH_SSFSTS 0x0090 +#define ICH_FLASH_SSFCTL 0x0092 +#define ICH_FLASH_PREOP 0x0094 +#define ICH_FLASH_OPTYPE 0x0096 +#define ICH_FLASH_OPMENU 0x0098 + +#define ICH_FLASH_REG_MAPSIZE 0x00A0 +#define ICH_FLASH_SECTOR_SIZE 4096 +#define ICH_GFPREG_BASE_MASK 0x1FFF +#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF /* ICH8 GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ /* Offset 04h HSFSTS */ diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 0329440..73f3a85 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -27,6 +27,7 @@ *******************************************************************************/ #include "e1000.h" +#include <net/ip6_checksum.h> char e1000_driver_name[] = "e1000"; static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; @@ -35,7 +36,7 @@ static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; #else #define DRIVERNAPI "-NAPI" #endif -#define DRV_VERSION "7.2.9-k4"DRIVERNAPI +#define DRV_VERSION "7.3.15-k2"DRIVERNAPI char e1000_driver_version[] = DRV_VERSION; static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; @@ -103,6 +104,9 @@ static struct pci_device_id e1000_pci_tbl[] = { INTEL_E1000_ETHERNET_DEVICE(0x10B9), INTEL_E1000_ETHERNET_DEVICE(0x10BA), INTEL_E1000_ETHERNET_DEVICE(0x10BB), + INTEL_E1000_ETHERNET_DEVICE(0x10BC), + INTEL_E1000_ETHERNET_DEVICE(0x10C4), + INTEL_E1000_ETHERNET_DEVICE(0x10C5), /* required last entry */ {0,} }; @@ -154,6 +158,9 @@ static struct net_device_stats * e1000_get_stats(struct net_device *netdev); static int e1000_change_mtu(struct net_device *netdev, int new_mtu); static int e1000_set_mac(struct net_device *netdev, void *p); static irqreturn_t e1000_intr(int irq, void *data); +#ifdef CONFIG_PCI_MSI +static irqreturn_t e1000_intr_msi(int irq, void *data); +#endif static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring); #ifdef CONFIG_E1000_NAPI @@ -285,7 +292,7 @@ static int e1000_request_irq(struct e1000_adapter *adapter) flags = IRQF_SHARED; #ifdef CONFIG_PCI_MSI - if (adapter->hw.mac_type > e1000_82547_rev_2) { + if (adapter->hw.mac_type >= e1000_82571) { adapter->have_msi = TRUE; if ((err = pci_enable_msi(adapter->pdev))) { DPRINTK(PROBE, ERR, @@ -293,8 +300,14 @@ static int e1000_request_irq(struct e1000_adapter *adapter) adapter->have_msi = FALSE; } } - if (adapter->have_msi) + if (adapter->have_msi) { flags &= ~IRQF_SHARED; + err = request_irq(adapter->pdev->irq, &e1000_intr_msi, flags, + netdev->name, netdev); + if (err) + DPRINTK(PROBE, ERR, + "Unable to allocate interrupt Error: %d\n", err); + } else #endif if ((err = request_irq(adapter->pdev->irq, &e1000_intr, flags, netdev->name, netdev))) @@ -375,7 +388,7 @@ e1000_update_mng_vlan(struct e1000_adapter *adapter) * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit. * For ASF and Pass Through versions of f/w this means that the * driver is no longer loaded. For AMT version (only with 82573) i - * of the f/w this means that the netowrk i/f is closed. + * of the f/w this means that the network i/f is closed. * **/ @@ -416,7 +429,7 @@ e1000_release_hw_control(struct e1000_adapter *adapter) * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit. * For ASF and Pass Through versions of f/w this means that * the driver is loaded. For AMT version (only with 82573) - * of the f/w this means that the netowrk i/f is open. + * of the f/w this means that the network i/f is open. * **/ @@ -426,6 +439,7 @@ e1000_get_hw_control(struct e1000_adapter *adapter) uint32_t ctrl_ext; uint32_t swsm; uint32_t extcnf; + /* Let firmware know the driver has taken over */ switch (adapter->hw.mac_type) { case e1000_82571: @@ -601,9 +615,6 @@ void e1000_reset(struct e1000_adapter *adapter) { uint32_t pba, manc; -#ifdef DISABLE_MULR - uint32_t tctl; -#endif uint16_t fc_high_water_mark = E1000_FC_HIGH_DIFF; /* Repartition Pba for greater than 9k mtu @@ -670,12 +681,7 @@ e1000_reset(struct e1000_adapter *adapter) e1000_reset_hw(&adapter->hw); if (adapter->hw.mac_type >= e1000_82544) E1000_WRITE_REG(&adapter->hw, WUC, 0); -#ifdef DISABLE_MULR - /* disable Multiple Reads in Transmit Control Register for debugging */ - tctl = E1000_READ_REG(hw, TCTL); - E1000_WRITE_REG(hw, TCTL, tctl & ~E1000_TCTL_MULR); -#endif if (e1000_init_hw(&adapter->hw)) DPRINTK(PROBE, ERR, "Hardware Error\n"); e1000_update_mng_vlan(adapter); @@ -851,9 +857,9 @@ e1000_probe(struct pci_dev *pdev, (adapter->hw.mac_type != e1000_82547)) netdev->features |= NETIF_F_TSO; -#ifdef NETIF_F_TSO_IPV6 +#ifdef NETIF_F_TSO6 if (adapter->hw.mac_type > e1000_82547_rev_2) - netdev->features |= NETIF_F_TSO_IPV6; + netdev->features |= NETIF_F_TSO6; #endif #endif if (pci_using_dac) @@ -967,6 +973,7 @@ e1000_probe(struct pci_dev *pdev, break; case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: case E1000_DEV_ID_82571EB_QUAD_COPPER: + case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE: /* if quad port adapter, disable WoL on all but port A */ if (global_quad_port_a != 0) adapter->eeprom_wol = 0; @@ -1278,12 +1285,10 @@ e1000_open(struct net_device *netdev) return -EBUSY; /* allocate transmit descriptors */ - if ((err = e1000_setup_all_tx_resources(adapter))) goto err_setup_tx; /* allocate receive descriptors */ - if ((err = e1000_setup_all_rx_resources(adapter))) goto err_setup_rx; @@ -1568,6 +1573,8 @@ e1000_configure_tx(struct e1000_adapter *adapter) if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) { tarc = E1000_READ_REG(hw, TARC0); + /* set the speed mode bit, we'll clear it if we're not at + * gigabit link later */ tarc |= (1 << 21); E1000_WRITE_REG(hw, TARC0, tarc); } else if (hw->mac_type == e1000_80003es2lan) { @@ -1582,8 +1589,11 @@ e1000_configure_tx(struct e1000_adapter *adapter) e1000_config_collision_dist(hw); /* Setup Transmit Descriptor Settings for eop descriptor */ - adapter->txd_cmd = E1000_TXD_CMD_IDE | E1000_TXD_CMD_EOP | - E1000_TXD_CMD_IFCS; + adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS; + + /* only set IDE if we are delaying interrupts using the timers */ + if (adapter->tx_int_delay) + adapter->txd_cmd |= E1000_TXD_CMD_IDE; if (hw->mac_type < e1000_82543) adapter->txd_cmd |= E1000_TXD_CMD_RPS; @@ -1820,8 +1830,11 @@ e1000_setup_rctl(struct e1000_adapter *adapter) /* Configure extra packet-split registers */ rfctl = E1000_READ_REG(&adapter->hw, RFCTL); rfctl |= E1000_RFCTL_EXTEN; - /* disable IPv6 packet split support */ - rfctl |= E1000_RFCTL_IPV6_DIS; + /* disable packet split support for IPv6 extension headers, + * because some malformed IPv6 headers can hang the RX */ + rfctl |= (E1000_RFCTL_IPV6_EX_DIS | + E1000_RFCTL_NEW_IPV6_EXT_DIS); + E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl); rctl |= E1000_RCTL_DTYP_PS; @@ -1884,7 +1897,7 @@ e1000_configure_rx(struct e1000_adapter *adapter) if (hw->mac_type >= e1000_82540) { E1000_WRITE_REG(hw, RADV, adapter->rx_abs_int_delay); - if (adapter->itr > 1) + if (adapter->itr_setting != 0) E1000_WRITE_REG(hw, ITR, 1000000000 / (adapter->itr * 256)); } @@ -1894,11 +1907,11 @@ e1000_configure_rx(struct e1000_adapter *adapter) /* Reset delay timers after every interrupt */ ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR; #ifdef CONFIG_E1000_NAPI - /* Auto-Mask interrupts upon ICR read. */ + /* Auto-Mask interrupts upon ICR access */ ctrl_ext |= E1000_CTRL_EXT_IAME; + E1000_WRITE_REG(hw, IAM, 0xffffffff); #endif E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); - E1000_WRITE_REG(hw, IAM, ~0); E1000_WRITE_FLUSH(hw); } @@ -1937,6 +1950,12 @@ e1000_configure_rx(struct e1000_adapter *adapter) E1000_WRITE_REG(hw, RXCSUM, rxcsum); } + /* enable early receives on 82573, only takes effect if using > 2048 + * byte total frame size. for example only for jumbo frames */ +#define E1000_ERT_2048 0x100 + if (hw->mac_type == e1000_82573) + E1000_WRITE_REG(hw, ERT, E1000_ERT_2048); + /* Enable Receives */ E1000_WRITE_REG(hw, RCTL, rctl); } @@ -1990,10 +2009,13 @@ e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter, buffer_info->dma, buffer_info->length, PCI_DMA_TODEVICE); + buffer_info->dma = 0; } - if (buffer_info->skb) + if (buffer_info->skb) { dev_kfree_skb_any(buffer_info->skb); - memset(buffer_info, 0, sizeof(struct e1000_buffer)); + buffer_info->skb = NULL; + } + /* buffer_info must be completely set up in the transmit path */ } /** @@ -2417,6 +2439,7 @@ e1000_watchdog(unsigned long data) DPRINTK(LINK, INFO, "Gigabit has been disabled, downgrading speed\n"); } + if (adapter->hw.mac_type == e1000_82573) { e1000_enable_tx_pkt_filtering(&adapter->hw); if (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id) @@ -2461,13 +2484,12 @@ e1000_watchdog(unsigned long data) if ((adapter->hw.mac_type == e1000_82571 || adapter->hw.mac_type == e1000_82572) && txb2b == 0) { -#define SPEED_MODE_BIT (1 << 21) uint32_t tarc0; tarc0 = E1000_READ_REG(&adapter->hw, TARC0); - tarc0 &= ~SPEED_MODE_BIT; + tarc0 &= ~(1 << 21); E1000_WRITE_REG(&adapter->hw, TARC0, tarc0); } - + #ifdef NETIF_F_TSO /* disable TSO for pcie and 10/100 speeds, to avoid * some hardware issues */ @@ -2479,9 +2501,15 @@ e1000_watchdog(unsigned long data) DPRINTK(PROBE,INFO, "10/100 speed: disabling TSO\n"); netdev->features &= ~NETIF_F_TSO; +#ifdef NETIF_F_TSO6 + netdev->features &= ~NETIF_F_TSO6; +#endif break; case SPEED_1000: netdev->features |= NETIF_F_TSO; +#ifdef NETIF_F_TSO6 + netdev->features |= NETIF_F_TSO6; +#endif break; default: /* oops */ @@ -2548,19 +2576,6 @@ e1000_watchdog(unsigned long data) } } - /* Dynamic mode for Interrupt Throttle Rate (ITR) */ - if (adapter->hw.mac_type >= e1000_82540 && adapter->itr == 1) { - /* Symmetric Tx/Rx gets a reduced ITR=2000; Total - * asymmetrical Tx or Rx gets ITR=8000; everyone - * else is between 2000-8000. */ - uint32_t goc = (adapter->gotcl + adapter->gorcl) / 10000; - uint32_t dif = (adapter->gotcl > adapter->gorcl ? - adapter->gotcl - adapter->gorcl : - adapter->gorcl - adapter->gotcl) / 10000; - uint32_t itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000; - E1000_WRITE_REG(&adapter->hw, ITR, 1000000000 / (itr * 256)); - } - /* Cause software interrupt to ensure rx ring is cleaned */ E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0); @@ -2576,6 +2591,135 @@ e1000_watchdog(unsigned long data) mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ); } +enum latency_range { + lowest_latency = 0, + low_latency = 1, + bulk_latency = 2, + latency_invalid = 255 +}; + +/** + * e1000_update_itr - update the dynamic ITR value based on statistics + * Stores a new ITR value based on packets and byte + * counts during the last interrupt. The advantage of per interrupt + * computation is faster updates and more accurate ITR for the current + * traffic pattern. Constants in this function were computed + * based on theoretical maximum wire speed and thresholds were set based + * on testing data as well as attempting to minimize response time + * while increasing bulk throughput. + * this functionality is controlled by the InterruptThrottleRate module + * parameter (see e1000_param.c) + * @adapter: pointer to adapter + * @itr_setting: current adapter->itr + * @packets: the number of packets during this measurement interval + * @bytes: the number of bytes during this measurement interval + **/ +static unsigned int e1000_update_itr(struct e1000_adapter *adapter, + uint16_t itr_setting, + int packets, + int bytes) +{ + unsigned int retval = itr_setting; + struct e1000_hw *hw = &adapter->hw; + + if (unlikely(hw->mac_type < e1000_82540)) + goto update_itr_done; + + if (packets == 0) + goto update_itr_done; + + + switch (itr_setting) { + case lowest_latency: + if ((packets < 5) && (bytes > 512)) + retval = low_latency; + break; + case low_latency: /* 50 usec aka 20000 ints/s */ + if (bytes > 10000) { + if ((packets < 10) || + ((bytes/packets) > 1200)) + retval = bulk_latency; + else if ((packets > 35)) + retval = lowest_latency; + } else if (packets <= 2 && bytes < 512) + retval = lowest_latency; + break; + case bulk_latency: /* 250 usec aka 4000 ints/s */ + if (bytes > 25000) { + if (packets > 35) + retval = low_latency; + } else { + if (bytes < 6000) + retval = low_latency; + } + break; + } + +update_itr_done: + return retval; +} + +static void e1000_set_itr(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + uint16_t current_itr; + uint32_t new_itr = adapter->itr; + + if (unlikely(hw->mac_type < e1000_82540)) + return; + + /* for non-gigabit speeds, just fix the interrupt rate at 4000 */ + if (unlikely(adapter->link_speed != SPEED_1000)) { + current_itr = 0; + new_itr = 4000; + goto set_itr_now; + } + + adapter->tx_itr = e1000_update_itr(adapter, + adapter->tx_itr, + adapter->total_tx_packets, + adapter->total_tx_bytes); + adapter->rx_itr = e1000_update_itr(adapter, + adapter->rx_itr, + adapter->total_rx_packets, + adapter->total_rx_bytes); + + current_itr = max(adapter->rx_itr, adapter->tx_itr); + + /* conservative mode eliminates the lowest_latency setting */ + if (current_itr == lowest_latency && (adapter->itr_setting == 3)) + current_itr = low_latency; + + switch (current_itr) { + /* counts and packets in update_itr are dependent on these numbers */ + case lowest_latency: + new_itr = 70000; + break; + case low_latency: + new_itr = 20000; /* aka hwitr = ~200 */ + break; + case bulk_latency: + new_itr = 4000; + break; + default: + break; + } + +set_itr_now: + if (new_itr != adapter->itr) { + /* this attempts to bias the interrupt rate towards Bulk + * by adding intermediate steps when interrupt rate is + * increasing */ + new_itr = new_itr > adapter->itr ? + min(adapter->itr + (new_itr >> 2), new_itr) : + new_itr; + adapter->itr = new_itr; + E1000_WRITE_REG(hw, ITR, 1000000000 / (new_itr * 256)); + } + + return; +} + #define E1000_TX_FLAGS_CSUM 0x00000001 #define E1000_TX_FLAGS_VLAN 0x00000002 #define E1000_TX_FLAGS_TSO 0x00000004 @@ -2616,7 +2760,7 @@ e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, 0); cmd_length = E1000_TXD_CMD_IP; ipcse = skb->h.raw - skb->data - 1; -#ifdef NETIF_F_TSO_IPV6 +#ifdef NETIF_F_TSO6 } else if (skb->protocol == htons(ETH_P_IPV6)) { skb->nh.ipv6h->payload_len = 0; skb->h.th->check = @@ -2652,6 +2796,7 @@ e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, context_desc->cmd_and_length = cpu_to_le32(cmd_length); buffer_info->time_stamp = jiffies; + buffer_info->next_to_watch = i; if (++i == tx_ring->count) i = 0; tx_ring->next_to_use = i; @@ -2680,12 +2825,13 @@ e1000_tx_csum(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, context_desc = E1000_CONTEXT_DESC(*tx_ring, i); context_desc->upper_setup.tcp_fields.tucss = css; - context_desc->upper_setup.tcp_fields.tucso = css + skb->csum; + context_desc->upper_setup.tcp_fields.tucso = css + skb->csum_offset; context_desc->upper_setup.tcp_fields.tucse = 0; context_desc->tcp_seg_setup.data = 0; context_desc->cmd_and_length = cpu_to_le32(E1000_TXD_CMD_DEXT); buffer_info->time_stamp = jiffies; + buffer_info->next_to_watch = i; if (unlikely(++i == tx_ring->count)) i = 0; tx_ring->next_to_use = i; @@ -2754,6 +2900,7 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, size, PCI_DMA_TODEVICE); buffer_info->time_stamp = jiffies; + buffer_info->next_to_watch = i; len -= size; offset += size; @@ -2793,6 +2940,7 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, size, PCI_DMA_TODEVICE); buffer_info->time_stamp = jiffies; + buffer_info->next_to_watch = i; len -= size; offset += size; @@ -2858,6 +3006,9 @@ e1000_tx_queue(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, tx_ring->next_to_use = i; writel(i, adapter->hw.hw_addr + tx_ring->tdt); + /* we need this if more than one processor can write to our tail + * at a time, it syncronizes IO on IA64/Altix systems */ + mmiowb(); } /** @@ -2951,6 +3102,7 @@ static int __e1000_maybe_stop_tx(struct net_device *netdev, int size) /* A reprieve! */ netif_start_queue(netdev); + ++adapter->restart_queue; return 0; } @@ -3009,9 +3161,9 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) max_per_txd = min(mss << 2, max_per_txd); max_txd_pwr = fls(max_per_txd) - 1; - /* TSO Workaround for 82571/2/3 Controllers -- if skb->data - * points to just header, pull a few bytes of payload from - * frags into skb->data */ + /* TSO Workaround for 82571/2/3 Controllers -- if skb->data + * points to just header, pull a few bytes of payload from + * frags into skb->data */ hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2)); if (skb->data_len && (hdr_len == (skb->len - skb->data_len))) { switch (adapter->hw.mac_type) { @@ -3316,12 +3468,12 @@ e1000_update_stats(struct e1000_adapter *adapter) adapter->stats.roc += E1000_READ_REG(hw, ROC); if (adapter->hw.mac_type != e1000_ich8lan) { - adapter->stats.prc64 += E1000_READ_REG(hw, PRC64); - adapter->stats.prc127 += E1000_READ_REG(hw, PRC127); - adapter->stats.prc255 += E1000_READ_REG(hw, PRC255); - adapter->stats.prc511 += E1000_READ_REG(hw, PRC511); - adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023); - adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522); + adapter->stats.prc64 += E1000_READ_REG(hw, PRC64); + adapter->stats.prc127 += E1000_READ_REG(hw, PRC127); + adapter->stats.prc255 += E1000_READ_REG(hw, PRC255); + adapter->stats.prc511 += E1000_READ_REG(hw, PRC511); + adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023); + adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522); } adapter->stats.symerrs += E1000_READ_REG(hw, SYMERRS); @@ -3352,12 +3504,12 @@ e1000_update_stats(struct e1000_adapter *adapter) adapter->stats.tpr += E1000_READ_REG(hw, TPR); if (adapter->hw.mac_type != e1000_ich8lan) { - adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64); - adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127); - adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255); - adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511); - adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023); - adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522); + adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64); + adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127); + adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255); + adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511); + adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023); + adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522); } adapter->stats.mptc += E1000_READ_REG(hw, MPTC); @@ -3383,18 +3535,17 @@ e1000_update_stats(struct e1000_adapter *adapter) adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC); if (adapter->hw.mac_type != e1000_ich8lan) { - adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC); - adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC); - adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC); - adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC); - adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC); - adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC); - adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC); + adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC); + adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC); + adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC); + adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC); + adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC); + adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC); + adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC); } } /* Fill out the OS statistics structure */ - adapter->net_stats.rx_packets = adapter->stats.gprc; adapter->net_stats.tx_packets = adapter->stats.gptc; adapter->net_stats.rx_bytes = adapter->stats.gorcl; @@ -3426,7 +3577,6 @@ e1000_update_stats(struct e1000_adapter *adapter) /* Tx Dropped needs to be maintained elsewhere */ /* Phy Stats */ - if (hw->media_type == e1000_media_type_copper) { if ((adapter->link_speed == SPEED_1000) && (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) { @@ -3442,6 +3592,95 @@ e1000_update_stats(struct e1000_adapter *adapter) spin_unlock_irqrestore(&adapter->stats_lock, flags); } +#ifdef CONFIG_PCI_MSI + +/** + * e1000_intr_msi - Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure + **/ + +static +irqreturn_t e1000_intr_msi(int irq, void *data) +{ + struct net_device *netdev = data; + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; +#ifndef CONFIG_E1000_NAPI + int i; +#endif + + /* this code avoids the read of ICR but has to get 1000 interrupts + * at every link change event before it will notice the change */ + if (++adapter->detect_link >= 1000) { + uint32_t icr = E1000_READ_REG(hw, ICR); +#ifdef CONFIG_E1000_NAPI + /* read ICR disables interrupts using IAM, so keep up with our + * enable/disable accounting */ + atomic_inc(&adapter->irq_sem); +#endif + adapter->detect_link = 0; + if ((icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) && + (icr & E1000_ICR_INT_ASSERTED)) { + hw->get_link_status = 1; + /* 80003ES2LAN workaround-- + * For packet buffer work-around on link down event; + * disable receives here in the ISR and + * reset adapter in watchdog + */ + if (netif_carrier_ok(netdev) && + (adapter->hw.mac_type == e1000_80003es2lan)) { + /* disable receives */ + uint32_t rctl = E1000_READ_REG(hw, RCTL); + E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN); + } + /* guard against interrupt when we're going down */ + if (!test_bit(__E1000_DOWN, &adapter->flags)) + mod_timer(&adapter->watchdog_timer, + jiffies + 1); + } + } else { + E1000_WRITE_REG(hw, ICR, (0xffffffff & ~(E1000_ICR_RXSEQ | + E1000_ICR_LSC))); + /* bummer we have to flush here, but things break otherwise as + * some event appears to be lost or delayed and throughput + * drops. In almost all tests this flush is un-necessary */ + E1000_WRITE_FLUSH(hw); +#ifdef CONFIG_E1000_NAPI + /* Interrupt Auto-Mask (IAM)...upon writing ICR, interrupts are + * masked. No need for the IMC write, but it does mean we + * should account for it ASAP. */ + atomic_inc(&adapter->irq_sem); +#endif + } + +#ifdef CONFIG_E1000_NAPI + if (likely(netif_rx_schedule_prep(netdev))) { + adapter->total_tx_bytes = 0; + adapter->total_tx_packets = 0; + adapter->total_rx_bytes = 0; + adapter->total_rx_packets = 0; + __netif_rx_schedule(netdev); + } else + e1000_irq_enable(adapter); +#else + adapter->total_tx_bytes = 0; + adapter->total_rx_bytes = 0; + adapter->total_tx_packets = 0; + adapter->total_rx_packets = 0; + + for (i = 0; i < E1000_MAX_INTR; i++) + if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) & + !e1000_clean_tx_irq(adapter, adapter->tx_ring))) + break; + + if (likely(adapter->itr_setting & 3)) + e1000_set_itr(adapter); +#endif + + return IRQ_HANDLED; +} +#endif /** * e1000_intr - Interrupt Handler @@ -3458,7 +3697,17 @@ e1000_intr(int irq, void *data) uint32_t rctl, icr = E1000_READ_REG(hw, ICR); #ifndef CONFIG_E1000_NAPI int i; -#else +#endif + if (unlikely(!icr)) + return IRQ_NONE; /* Not our interrupt */ + +#ifdef CONFIG_E1000_NAPI + /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is + * not set, then the adapter didn't send an interrupt */ + if (unlikely(hw->mac_type >= e1000_82571 && + !(icr & E1000_ICR_INT_ASSERTED))) + return IRQ_NONE; + /* Interrupt Auto-Mask...upon reading ICR, * interrupts are masked. No need for the * IMC write, but it does mean we should @@ -3467,14 +3716,6 @@ e1000_intr(int irq, void *data) atomic_inc(&adapter->irq_sem); #endif - if (unlikely(!icr)) { -#ifdef CONFIG_E1000_NAPI - if (hw->mac_type >= e1000_82571) - e1000_irq_enable(adapter); -#endif - return IRQ_NONE; /* Not our interrupt */ - } - if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) { hw->get_link_status = 1; /* 80003ES2LAN workaround-- @@ -3495,13 +3736,20 @@ e1000_intr(int irq, void *data) #ifdef CONFIG_E1000_NAPI if (unlikely(hw->mac_type < e1000_82571)) { + /* disable interrupts, without the synchronize_irq bit */ atomic_inc(&adapter->irq_sem); E1000_WRITE_REG(hw, IMC, ~0); E1000_WRITE_FLUSH(hw); } - if (likely(netif_rx_schedule_prep(netdev))) + if (likely(netif_rx_schedule_prep(netdev))) { + adapter->total_tx_bytes = 0; + adapter->total_tx_packets = 0; + adapter->total_rx_bytes = 0; + adapter->total_rx_packets = 0; __netif_rx_schedule(netdev); - else + } else + /* this really should not happen! if it does it is basically a + * bug, but not a hard error, so enable ints and continue */ e1000_irq_enable(adapter); #else /* Writing IMC and IMS is needed for 82547. @@ -3519,16 +3767,23 @@ e1000_intr(int irq, void *data) E1000_WRITE_REG(hw, IMC, ~0); } + adapter->total_tx_bytes = 0; + adapter->total_rx_bytes = 0; + adapter->total_tx_packets = 0; + adapter->total_rx_packets = 0; + for (i = 0; i < E1000_MAX_INTR; i++) if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) & !e1000_clean_tx_irq(adapter, adapter->tx_ring))) break; + if (likely(adapter->itr_setting & 3)) + e1000_set_itr(adapter); + if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2) e1000_irq_enable(adapter); #endif - return IRQ_HANDLED; } @@ -3572,6 +3827,8 @@ e1000_clean(struct net_device *poll_dev, int *budget) if ((!tx_cleaned && (work_done == 0)) || !netif_running(poll_dev)) { quit_polling: + if (likely(adapter->itr_setting & 3)) + e1000_set_itr(adapter); netif_rx_complete(poll_dev); e1000_irq_enable(adapter); return 0; @@ -3598,6 +3855,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, unsigned int count = 0; #endif boolean_t cleaned = FALSE; + unsigned int total_tx_bytes=0, total_tx_packets=0; i = tx_ring->next_to_clean; eop = tx_ring->buffer_info[i].next_to_watch; @@ -3609,13 +3867,19 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, buffer_info = &tx_ring->buffer_info[i]; cleaned = (i == eop); + if (cleaned) { + /* this packet count is wrong for TSO but has a + * tendency to make dynamic ITR change more + * towards bulk */ + total_tx_packets++; + total_tx_bytes += buffer_info->skb->len; + } e1000_unmap_and_free_tx_resource(adapter, buffer_info); - memset(tx_desc, 0, sizeof(struct e1000_tx_desc)); + tx_desc->upper.data = 0; if (unlikely(++i == tx_ring->count)) i = 0; } - eop = tx_ring->buffer_info[i].next_to_watch; eop_desc = E1000_TX_DESC(*tx_ring, eop); #ifdef CONFIG_E1000_NAPI @@ -3634,8 +3898,10 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, * sees the new next_to_clean. */ smp_mb(); - if (netif_queue_stopped(netdev)) + if (netif_queue_stopped(netdev)) { netif_wake_queue(netdev); + ++adapter->restart_queue; + } } if (adapter->detect_tx_hung) { @@ -3673,6 +3939,8 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, netif_stop_queue(netdev); } } + adapter->total_tx_bytes += total_tx_bytes; + adapter->total_tx_packets += total_tx_packets; return cleaned; } @@ -3752,6 +4020,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, unsigned int i; int cleaned_count = 0; boolean_t cleaned = FALSE; + unsigned int total_rx_bytes=0, total_rx_packets=0; i = rx_ring->next_to_clean; rx_desc = E1000_RX_DESC(*rx_ring, i); @@ -3760,6 +4029,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, while (rx_desc->status & E1000_RXD_STAT_DD) { struct sk_buff *skb; u8 status; + #ifdef CONFIG_E1000_NAPI if (*work_done >= work_to_do) break; @@ -3817,6 +4087,10 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, * done after the TBI_ACCEPT workaround above */ length -= 4; + /* probably a little skewed due to removing CRC */ + total_rx_bytes += length; + total_rx_packets++; + /* code added for copybreak, this should improve * performance for small packets with large amounts * of reassembly being done in the stack */ @@ -3832,12 +4106,11 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, /* save the skb in buffer_info as good */ buffer_info->skb = skb; skb = new_skb; - skb_put(skb, length); } - } else - skb_put(skb, length); - + /* else just continue with the old one */ + } /* end copybreak code */ + skb_put(skb, length); /* Receive Checksum Offload */ e1000_rx_checksum(adapter, @@ -3886,6 +4159,8 @@ next_desc: if (cleaned_count) adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count); + adapter->total_rx_packets += total_rx_packets; + adapter->total_rx_bytes += total_rx_bytes; return cleaned; } @@ -3915,6 +4190,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, uint32_t length, staterr; int cleaned_count = 0; boolean_t cleaned = FALSE; + unsigned int total_rx_bytes=0, total_rx_packets=0; i = rx_ring->next_to_clean; rx_desc = E1000_RX_DESC_PS(*rx_ring, i); @@ -3999,7 +4275,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, goto copydone; } /* if */ } - + for (j = 0; j < adapter->rx_ps_pages; j++) { if (!(length= le16_to_cpu(rx_desc->wb.upper.length[j]))) break; @@ -4019,6 +4295,9 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, pskb_trim(skb, skb->len - 4); copydone: + total_rx_bytes += skb->len; + total_rx_packets++; + e1000_rx_checksum(adapter, staterr, le16_to_cpu(rx_desc->wb.lower.hi_dword.csum_ip.csum), skb); skb->protocol = eth_type_trans(skb, netdev); @@ -4067,6 +4346,8 @@ next_desc: if (cleaned_count) adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count); + adapter->total_rx_packets += total_rx_packets; + adapter->total_rx_bytes += total_rx_bytes; return cleaned; } @@ -4234,7 +4515,7 @@ e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, } skb = netdev_alloc_skb(netdev, - adapter->rx_ps_bsize0 + NET_IP_ALIGN); + adapter->rx_ps_bsize0 + NET_IP_ALIGN); if (unlikely(!skb)) { adapter->alloc_rx_buff_failed++; @@ -4511,7 +4792,6 @@ e1000_read_pcie_cap_reg(struct e1000_hw *hw, uint32_t reg, uint16_t *value) return E1000_SUCCESS; } - void e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value) { @@ -4534,12 +4814,12 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) E1000_WRITE_REG(&adapter->hw, CTRL, ctrl); if (adapter->hw.mac_type != e1000_ich8lan) { - /* enable VLAN receive filtering */ - rctl = E1000_READ_REG(&adapter->hw, RCTL); - rctl |= E1000_RCTL_VFE; - rctl &= ~E1000_RCTL_CFIEN; - E1000_WRITE_REG(&adapter->hw, RCTL, rctl); - e1000_update_mng_vlan(adapter); + /* enable VLAN receive filtering */ + rctl = E1000_READ_REG(&adapter->hw, RCTL); + rctl |= E1000_RCTL_VFE; + rctl &= ~E1000_RCTL_CFIEN; + E1000_WRITE_REG(&adapter->hw, RCTL, rctl); + e1000_update_mng_vlan(adapter); } } else { /* disable VLAN tag insert/strip */ @@ -4548,14 +4828,16 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) E1000_WRITE_REG(&adapter->hw, CTRL, ctrl); if (adapter->hw.mac_type != e1000_ich8lan) { - /* disable VLAN filtering */ - rctl = E1000_READ_REG(&adapter->hw, RCTL); - rctl &= ~E1000_RCTL_VFE; - E1000_WRITE_REG(&adapter->hw, RCTL, rctl); - if (adapter->mng_vlan_id != (uint16_t)E1000_MNG_VLAN_NONE) { - e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); - adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; - } + /* disable VLAN filtering */ + rctl = E1000_READ_REG(&adapter->hw, RCTL); + rctl &= ~E1000_RCTL_VFE; + E1000_WRITE_REG(&adapter->hw, RCTL, rctl); + if (adapter->mng_vlan_id != + (uint16_t)E1000_MNG_VLAN_NONE) { + e1000_vlan_rx_kill_vid(netdev, + adapter->mng_vlan_id); + adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; + } } } diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h index a464cb2..18afc0c 100644 --- a/drivers/net/e1000/e1000_osdep.h +++ b/drivers/net/e1000/e1000_osdep.h @@ -107,17 +107,16 @@ typedef enum { #define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, STATUS) -#define E1000_WRITE_ICH8_REG(a, reg, value) ( \ +#define E1000_WRITE_ICH_FLASH_REG(a, reg, value) ( \ writel((value), ((a)->flash_address + reg))) -#define E1000_READ_ICH8_REG(a, reg) ( \ +#define E1000_READ_ICH_FLASH_REG(a, reg) ( \ readl((a)->flash_address + reg)) -#define E1000_WRITE_ICH8_REG16(a, reg, value) ( \ +#define E1000_WRITE_ICH_FLASH_REG16(a, reg, value) ( \ writew((value), ((a)->flash_address + reg))) -#define E1000_READ_ICH8_REG16(a, reg) ( \ +#define E1000_READ_ICH_FLASH_REG16(a, reg) ( \ readw((a)->flash_address + reg)) - #endif /* _E1000_OSDEP_H_ */ diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c index 9c3c1ac..cbfcd7f 100644 --- a/drivers/net/e1000/e1000_param.c +++ b/drivers/net/e1000/e1000_param.c @@ -44,16 +44,6 @@ */ #define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET } -/* Module Parameters are always initialized to -1, so that the driver - * can tell the difference between no user specified value or the - * user asking for the default value. - * The true default values are loaded in when e1000_check_options is called. - * - * This is a GCC extension to ANSI C. - * See the item "Labeled Elements in Initializers" in the section - * "Extensions to the C Language Family" of the GCC documentation. - */ - #define E1000_PARAM(X, desc) \ static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \ static int num_##X = 0; \ @@ -67,7 +57,6 @@ * * Default Value: 256 */ - E1000_PARAM(TxDescriptors, "Number of transmit descriptors"); /* Receive Descriptor Count @@ -77,7 +66,6 @@ E1000_PARAM(TxDescriptors, "Number of transmit descriptors"); * * Default Value: 256 */ - E1000_PARAM(RxDescriptors, "Number of receive descriptors"); /* User Specified Speed Override @@ -90,7 +78,6 @@ E1000_PARAM(RxDescriptors, "Number of receive descriptors"); * * Default Value: 0 */ - E1000_PARAM(Speed, "Speed setting"); /* User Specified Duplex Override @@ -102,7 +89,6 @@ E1000_PARAM(Speed, "Speed setting"); * * Default Value: 0 */ - E1000_PARAM(Duplex, "Duplex setting"); /* Auto-negotiation Advertisement Override @@ -119,8 +105,9 @@ E1000_PARAM(Duplex, "Duplex setting"); * * Default Value: 0x2F (copper); 0x20 (fiber) */ - E1000_PARAM(AutoNeg, "Advertised auto-negotiation setting"); +#define AUTONEG_ADV_DEFAULT 0x2F +#define AUTONEG_ADV_MASK 0x2F /* User Specified Flow Control Override * @@ -132,8 +119,8 @@ E1000_PARAM(AutoNeg, "Advertised auto-negotiation setting"); * * Default Value: Read flow control settings from the EEPROM */ - E1000_PARAM(FlowControl, "Flow Control setting"); +#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL /* XsumRX - Receive Checksum Offload Enable/Disable * @@ -144,53 +131,54 @@ E1000_PARAM(FlowControl, "Flow Control setting"); * * Default Value: 1 */ - E1000_PARAM(XsumRX, "Disable or enable Receive Checksum offload"); /* Transmit Interrupt Delay in units of 1.024 microseconds + * Tx interrupt delay needs to typically be set to something non zero * * Valid Range: 0-65535 - * - * Default Value: 64 */ - E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay"); +#define DEFAULT_TIDV 8 +#define MAX_TXDELAY 0xFFFF +#define MIN_TXDELAY 0 /* Transmit Absolute Interrupt Delay in units of 1.024 microseconds * * Valid Range: 0-65535 - * - * Default Value: 0 */ - E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay"); +#define DEFAULT_TADV 32 +#define MAX_TXABSDELAY 0xFFFF +#define MIN_TXABSDELAY 0 /* Receive Interrupt Delay in units of 1.024 microseconds + * hardware will likely hang if you set this to anything but zero. * * Valid Range: 0-65535 - * - * Default Value: 0 */ - E1000_PARAM(RxIntDelay, "Receive Interrupt Delay"); +#define DEFAULT_RDTR 0 +#define MAX_RXDELAY 0xFFFF +#define MIN_RXDELAY 0 /* Receive Absolute Interrupt Delay in units of 1.024 microseconds * * Valid Range: 0-65535 - * - * Default Value: 128 */ - E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay"); +#define DEFAULT_RADV 8 +#define MAX_RXABSDELAY 0xFFFF +#define MIN_RXABSDELAY 0 /* Interrupt Throttle Rate (interrupts/sec) * - * Valid Range: 100-100000 (0=off, 1=dynamic) - * - * Default Value: 8000 + * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative) */ - E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); +#define DEFAULT_ITR 3 +#define MAX_ITR 100000 +#define MIN_ITR 100 /* Enable Smart Power Down of the PHY * @@ -198,7 +186,6 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); * * Default Value: 0 (disabled) */ - E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down"); /* Enable Kumeran Lock Loss workaround @@ -207,33 +194,8 @@ E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down"); * * Default Value: 1 (enabled) */ - E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround"); -#define AUTONEG_ADV_DEFAULT 0x2F -#define AUTONEG_ADV_MASK 0x2F -#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL - -#define DEFAULT_RDTR 0 -#define MAX_RXDELAY 0xFFFF -#define MIN_RXDELAY 0 - -#define DEFAULT_RADV 128 -#define MAX_RXABSDELAY 0xFFFF -#define MIN_RXABSDELAY 0 - -#define DEFAULT_TIDV 64 -#define MAX_TXDELAY 0xFFFF -#define MIN_TXDELAY 0 - -#define DEFAULT_TADV 64 -#define MAX_TXABSDELAY 0xFFFF -#define MIN_TXABSDELAY 0 - -#define DEFAULT_ITR 8000 -#define MAX_ITR 100000 -#define MIN_ITR 100 - struct e1000_option { enum { enable_option, range_option, list_option } type; char *name; @@ -510,15 +472,27 @@ e1000_check_options(struct e1000_adapter *adapter) break; case 1: DPRINTK(PROBE, INFO, "%s set to dynamic mode\n", - opt.name); + opt.name); + adapter->itr_setting = adapter->itr; + adapter->itr = 20000; + break; + case 3: + DPRINTK(PROBE, INFO, + "%s set to dynamic conservative mode\n", + opt.name); + adapter->itr_setting = adapter->itr; + adapter->itr = 20000; break; default: e1000_validate_option(&adapter->itr, &opt, - adapter); + adapter); + /* save the setting, because the dynamic bits change itr */ + adapter->itr_setting = adapter->itr; break; } } else { - adapter->itr = opt.def; + adapter->itr_setting = opt.def; + adapter->itr = 20000; } } { /* Smart Power Down */ |