diff options
author | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-03-30 14:46:36 (GMT) |
---|---|---|
committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-08-11 02:54:11 (GMT) |
commit | b955f6ca776f3bab3d1e2c5fb1d247b203cbda14 (patch) | |
tree | 88e47fa3369f95c5673d4d654ae5f432cdc79048 /drivers/net/ethernet/amd/atarilance.c | |
parent | ca7a8e85262e93065b2a49dfb96a24d4a534a049 (diff) | |
download | linux-b955f6ca776f3bab3d1e2c5fb1d247b203cbda14.tar.xz |
amd: Move AMD (Lance) chipset drivers
Moves the drivers for the AMD chipsets into drivers/net/ethernet/amd/
and the necessary Kconfig and Makfile changes.
The au1000 (Alchemy) driver was also moved into the same directory
even though it is not a "Lance" driver.
CC: Peter Maydell <pmaydell@chiark.greenend.org.uk>
CC: Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
CC: "Maciej W. Rozycki" <macro@linux-mips.org>
CC: Donald Becker <becker@scyld.com>
CC: Sam Creasey <sammy@users.qual.net>
CC: Miguel de Icaza <miguel@nuclecu.unam.mx>
CC: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
CC: Don Fry <pcnet32@frontier.com>
CC: Geert Uytterhoeven <geert@linux-m68k.org>
CC: Russell King <linux@arm.linux.org.uk>
CC: David Davies <davies@maniac.ultranet.com>
CC: "M.Hipp" <hippm@informatik.uni-tuebingen.de>
CC: Pete Popov <ppopov@embeddedalley.com>
CC: David Hinds <dahinds@users.sourceforge.net>
CC: "Roger C. Pao" <rpao@paonet.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet/amd/atarilance.c')
-rw-r--r-- | drivers/net/ethernet/amd/atarilance.c | 1176 |
1 files changed, 1176 insertions, 0 deletions
diff --git a/drivers/net/ethernet/amd/atarilance.c b/drivers/net/ethernet/amd/atarilance.c new file mode 100644 index 0000000..1264d78 --- /dev/null +++ b/drivers/net/ethernet/amd/atarilance.c @@ -0,0 +1,1176 @@ +/* atarilance.c: Ethernet driver for VME Lance cards on the Atari */ +/* + Written 1995/96 by Roman Hodek (Roman.Hodek@informatik.uni-erlangen.de) + + This software may be used and distributed according to the terms + of the GNU General Public License, incorporated herein by reference. + + This drivers was written with the following sources of reference: + - The driver for the Riebl Lance card by the TU Vienna. + - The modified TUW driver for PAM's VME cards + - The PC-Linux driver for Lance cards (but this is for bus master + cards, not the shared memory ones) + - The Amiga Ariadne driver + + v1.0: (in 1.2.13pl4/0.9.13) + Initial version + v1.1: (in 1.2.13pl5) + more comments + deleted some debugging stuff + optimized register access (keep AREG pointing to CSR0) + following AMD, CSR0_STRT should be set only after IDON is detected + use memcpy() for data transfers, that also employs long word moves + better probe procedure for 24-bit systems + non-VME-RieblCards need extra delays in memcpy + must also do write test, since 0xfxe00000 may hit ROM + use 8/32 tx/rx buffers, which should give better NFS performance; + this is made possible by shifting the last packet buffer after the + RieblCard reserved area + v1.2: (in 1.2.13pl8) + again fixed probing for the Falcon; 0xfe01000 hits phys. 0x00010000 + and thus RAM, in case of no Lance found all memory contents have to + be restored! + Now possible to compile as module. + v1.3: 03/30/96 Jes Sorensen, Roman (in 1.3) + Several little 1.3 adaptions + When the lance is stopped it jumps back into little-endian + mode. It is therefore necessary to put it back where it + belongs, in big endian mode, in order to make things work. + This might be the reason why multicast-mode didn't work + before, but I'm not able to test it as I only got an Amiga + (we had similar problems with the A2065 driver). + +*/ + +static char version[] = "atarilance.c: v1.3 04/04/96 " + "Roman.Hodek@informatik.uni-erlangen.de\n"; + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/module.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/skbuff.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/bitops.h> + +#include <asm/setup.h> +#include <asm/irq.h> +#include <asm/atarihw.h> +#include <asm/atariints.h> +#include <asm/io.h> + +/* Debug level: + * 0 = silent, print only serious errors + * 1 = normal, print error messages + * 2 = debug, print debug infos + * 3 = debug, print even more debug infos (packet data) + */ + +#define LANCE_DEBUG 1 + +#ifdef LANCE_DEBUG +static int lance_debug = LANCE_DEBUG; +#else +static int lance_debug = 1; +#endif +module_param(lance_debug, int, 0); +MODULE_PARM_DESC(lance_debug, "atarilance debug level (0-3)"); +MODULE_LICENSE("GPL"); + +/* Print debug messages on probing? */ +#undef LANCE_DEBUG_PROBE + +#define DPRINTK(n,a) \ + do { \ + if (lance_debug >= n) \ + printk a; \ + } while( 0 ) + +#ifdef LANCE_DEBUG_PROBE +# define PROBE_PRINT(a) printk a +#else +# define PROBE_PRINT(a) +#endif + +/* These define the number of Rx and Tx buffers as log2. (Only powers + * of two are valid) + * Much more rx buffers (32) are reserved than tx buffers (8), since receiving + * is more time critical then sending and packets may have to remain in the + * board's memory when main memory is low. + */ + +#define TX_LOG_RING_SIZE 3 +#define RX_LOG_RING_SIZE 5 + +/* These are the derived values */ + +#define TX_RING_SIZE (1 << TX_LOG_RING_SIZE) +#define TX_RING_LEN_BITS (TX_LOG_RING_SIZE << 5) +#define TX_RING_MOD_MASK (TX_RING_SIZE - 1) + +#define RX_RING_SIZE (1 << RX_LOG_RING_SIZE) +#define RX_RING_LEN_BITS (RX_LOG_RING_SIZE << 5) +#define RX_RING_MOD_MASK (RX_RING_SIZE - 1) + +#define TX_TIMEOUT (HZ/5) + +/* The LANCE Rx and Tx ring descriptors. */ +struct lance_rx_head { + unsigned short base; /* Low word of base addr */ + volatile unsigned char flag; + unsigned char base_hi; /* High word of base addr (unused) */ + short buf_length; /* This length is 2s complement! */ + volatile short msg_length; /* This length is "normal". */ +}; + +struct lance_tx_head { + unsigned short base; /* Low word of base addr */ + volatile unsigned char flag; + unsigned char base_hi; /* High word of base addr (unused) */ + short length; /* Length is 2s complement! */ + volatile short misc; +}; + +struct ringdesc { + unsigned short adr_lo; /* Low 16 bits of address */ + unsigned char len; /* Length bits */ + unsigned char adr_hi; /* High 8 bits of address (unused) */ +}; + +/* The LANCE initialization block, described in databook. */ +struct lance_init_block { + unsigned short mode; /* Pre-set mode */ + unsigned char hwaddr[6]; /* Physical ethernet address */ + unsigned filter[2]; /* Multicast filter (unused). */ + /* Receive and transmit ring base, along with length bits. */ + struct ringdesc rx_ring; + struct ringdesc tx_ring; +}; + +/* The whole layout of the Lance shared memory */ +struct lance_memory { + struct lance_init_block init; + struct lance_tx_head tx_head[TX_RING_SIZE]; + struct lance_rx_head rx_head[RX_RING_SIZE]; + char packet_area[0]; /* packet data follow after the + * init block and the ring + * descriptors and are located + * at runtime */ +}; + +/* RieblCard specifics: + * The original TOS driver for these cards reserves the area from offset + * 0xee70 to 0xeebb for storing configuration data. Of interest to us is the + * Ethernet address there, and the magic for verifying the data's validity. + * The reserved area isn't touch by packet buffers. Furthermore, offset 0xfffe + * is reserved for the interrupt vector number. + */ +#define RIEBL_RSVD_START 0xee70 +#define RIEBL_RSVD_END 0xeec0 +#define RIEBL_MAGIC 0x09051990 +#define RIEBL_MAGIC_ADDR ((unsigned long *)(((char *)MEM) + 0xee8a)) +#define RIEBL_HWADDR_ADDR ((unsigned char *)(((char *)MEM) + 0xee8e)) +#define RIEBL_IVEC_ADDR ((unsigned short *)(((char *)MEM) + 0xfffe)) + +/* This is a default address for the old RieblCards without a battery + * that have no ethernet address at boot time. 00:00:36:04 is the + * prefix for Riebl cards, the 00:00 at the end is arbitrary. + */ + +static unsigned char OldRieblDefHwaddr[6] = { + 0x00, 0x00, 0x36, 0x04, 0x00, 0x00 +}; + + +/* I/O registers of the Lance chip */ + +struct lance_ioreg { +/* base+0x0 */ volatile unsigned short data; +/* base+0x2 */ volatile unsigned short addr; + unsigned char _dummy1[3]; +/* base+0x7 */ volatile unsigned char ivec; + unsigned char _dummy2[5]; +/* base+0xd */ volatile unsigned char eeprom; + unsigned char _dummy3; +/* base+0xf */ volatile unsigned char mem; +}; + +/* Types of boards this driver supports */ + +enum lance_type { + OLD_RIEBL, /* old Riebl card without battery */ + NEW_RIEBL, /* new Riebl card with battery */ + PAM_CARD /* PAM card with EEPROM */ +}; + +static char *lance_names[] = { + "Riebl-Card (without battery)", + "Riebl-Card (with battery)", + "PAM intern card" +}; + +/* The driver's private device structure */ + +struct lance_private { + enum lance_type cardtype; + struct lance_ioreg *iobase; + struct lance_memory *mem; + int cur_rx, cur_tx; /* The next free ring entry */ + int dirty_tx; /* Ring entries to be freed. */ + /* copy function */ + void *(*memcpy_f)( void *, const void *, size_t ); +/* This must be long for set_bit() */ + long tx_full; + spinlock_t devlock; +}; + +/* I/O register access macros */ + +#define MEM lp->mem +#define DREG IO->data +#define AREG IO->addr +#define REGA(a) (*( AREG = (a), &DREG )) + +/* Definitions for packet buffer access: */ +#define PKT_BUF_SZ 1544 +/* Get the address of a packet buffer corresponding to a given buffer head */ +#define PKTBUF_ADDR(head) (((unsigned char *)(MEM)) + (head)->base) + +/* Possible memory/IO addresses for probing */ + +static struct lance_addr { + unsigned long memaddr; + unsigned long ioaddr; + int slow_flag; +} lance_addr_list[] = { + { 0xfe010000, 0xfe00fff0, 0 }, /* RieblCard VME in TT */ + { 0xffc10000, 0xffc0fff0, 0 }, /* RieblCard VME in MegaSTE + (highest byte stripped) */ + { 0xffe00000, 0xffff7000, 1 }, /* RieblCard in ST + (highest byte stripped) */ + { 0xffd00000, 0xffff7000, 1 }, /* RieblCard in ST with hw modif. to + avoid conflict with ROM + (highest byte stripped) */ + { 0xffcf0000, 0xffcffff0, 0 }, /* PAMCard VME in TT and MSTE + (highest byte stripped) */ + { 0xfecf0000, 0xfecffff0, 0 }, /* Rhotron's PAMCard VME in TT and MSTE + (highest byte stripped) */ +}; + +#define N_LANCE_ADDR ARRAY_SIZE(lance_addr_list) + + +/* Definitions for the Lance */ + +/* tx_head flags */ +#define TMD1_ENP 0x01 /* end of packet */ +#define TMD1_STP 0x02 /* start of packet */ +#define TMD1_DEF 0x04 /* deferred */ +#define TMD1_ONE 0x08 /* one retry needed */ +#define TMD1_MORE 0x10 /* more than one retry needed */ +#define TMD1_ERR 0x40 /* error summary */ +#define TMD1_OWN 0x80 /* ownership (set: chip owns) */ + +#define TMD1_OWN_CHIP TMD1_OWN +#define TMD1_OWN_HOST 0 + +/* tx_head misc field */ +#define TMD3_TDR 0x03FF /* Time Domain Reflectometry counter */ +#define TMD3_RTRY 0x0400 /* failed after 16 retries */ +#define TMD3_LCAR 0x0800 /* carrier lost */ +#define TMD3_LCOL 0x1000 /* late collision */ +#define TMD3_UFLO 0x4000 /* underflow (late memory) */ +#define TMD3_BUFF 0x8000 /* buffering error (no ENP) */ + +/* rx_head flags */ +#define RMD1_ENP 0x01 /* end of packet */ +#define RMD1_STP 0x02 /* start of packet */ +#define RMD1_BUFF 0x04 /* buffer error */ +#define RMD1_CRC 0x08 /* CRC error */ +#define RMD1_OFLO 0x10 /* overflow */ +#define RMD1_FRAM 0x20 /* framing error */ +#define RMD1_ERR 0x40 /* error summary */ +#define RMD1_OWN 0x80 /* ownership (set: ship owns) */ + +#define RMD1_OWN_CHIP RMD1_OWN +#define RMD1_OWN_HOST 0 + +/* register names */ +#define CSR0 0 /* mode/status */ +#define CSR1 1 /* init block addr (low) */ +#define CSR2 2 /* init block addr (high) */ +#define CSR3 3 /* misc */ +#define CSR8 8 /* address filter */ +#define CSR15 15 /* promiscuous mode */ + +/* CSR0 */ +/* (R=readable, W=writeable, S=set on write, C=clear on write) */ +#define CSR0_INIT 0x0001 /* initialize (RS) */ +#define CSR0_STRT 0x0002 /* start (RS) */ +#define CSR0_STOP 0x0004 /* stop (RS) */ +#define CSR0_TDMD 0x0008 /* transmit demand (RS) */ +#define CSR0_TXON 0x0010 /* transmitter on (R) */ +#define CSR0_RXON 0x0020 /* receiver on (R) */ +#define CSR0_INEA 0x0040 /* interrupt enable (RW) */ +#define CSR0_INTR 0x0080 /* interrupt active (R) */ +#define CSR0_IDON 0x0100 /* initialization done (RC) */ +#define CSR0_TINT 0x0200 /* transmitter interrupt (RC) */ +#define CSR0_RINT 0x0400 /* receiver interrupt (RC) */ +#define CSR0_MERR 0x0800 /* memory error (RC) */ +#define CSR0_MISS 0x1000 /* missed frame (RC) */ +#define CSR0_CERR 0x2000 /* carrier error (no heartbeat :-) (RC) */ +#define CSR0_BABL 0x4000 /* babble: tx-ed too many bits (RC) */ +#define CSR0_ERR 0x8000 /* error (RC) */ + +/* CSR3 */ +#define CSR3_BCON 0x0001 /* byte control */ +#define CSR3_ACON 0x0002 /* ALE control */ +#define CSR3_BSWP 0x0004 /* byte swap (1=big endian) */ + + + +/***************************** Prototypes *****************************/ + +static unsigned long lance_probe1( struct net_device *dev, struct lance_addr + *init_rec ); +static int lance_open( struct net_device *dev ); +static void lance_init_ring( struct net_device *dev ); +static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev ); +static irqreturn_t lance_interrupt( int irq, void *dev_id ); +static int lance_rx( struct net_device *dev ); +static int lance_close( struct net_device *dev ); +static void set_multicast_list( struct net_device *dev ); +static int lance_set_mac_address( struct net_device *dev, void *addr ); +static void lance_tx_timeout (struct net_device *dev); + +/************************* End of Prototypes **************************/ + + + + + +static void *slow_memcpy( void *dst, const void *src, size_t len ) + +{ char *cto = dst; + const char *cfrom = src; + + while( len-- ) { + *cto++ = *cfrom++; + MFPDELAY(); + } + return dst; +} + + +struct net_device * __init atarilance_probe(int unit) +{ + int i; + static int found; + struct net_device *dev; + int err = -ENODEV; + + if (!MACH_IS_ATARI || found) + /* Assume there's only one board possible... That seems true, since + * the Riebl/PAM board's address cannot be changed. */ + return ERR_PTR(-ENODEV); + + dev = alloc_etherdev(sizeof(struct lance_private)); + if (!dev) + return ERR_PTR(-ENOMEM); + if (unit >= 0) { + sprintf(dev->name, "eth%d", unit); + netdev_boot_setup_check(dev); + } + + for( i = 0; i < N_LANCE_ADDR; ++i ) { + if (lance_probe1( dev, &lance_addr_list[i] )) { + found = 1; + err = register_netdev(dev); + if (!err) + return dev; + free_irq(dev->irq, dev); + break; + } + } + free_netdev(dev); + return ERR_PTR(err); +} + + +/* Derived from hwreg_present() in atari/config.c: */ + +static noinline int __init addr_accessible(volatile void *regp, int wordflag, + int writeflag) +{ + int ret; + unsigned long flags; + long *vbr, save_berr; + + local_irq_save(flags); + + __asm__ __volatile__ ( "movec %/vbr,%0" : "=r" (vbr) : ); + save_berr = vbr[2]; + + __asm__ __volatile__ + ( "movel %/sp,%/d1\n\t" + "movel #Lberr,%2@\n\t" + "moveq #0,%0\n\t" + "tstl %3\n\t" + "bne 1f\n\t" + "moveb %1@,%/d0\n\t" + "nop \n\t" + "bra 2f\n" +"1: movew %1@,%/d0\n\t" + "nop \n" +"2: tstl %4\n\t" + "beq 2f\n\t" + "tstl %3\n\t" + "bne 1f\n\t" + "clrb %1@\n\t" + "nop \n\t" + "moveb %/d0,%1@\n\t" + "nop \n\t" + "bra 2f\n" +"1: clrw %1@\n\t" + "nop \n\t" + "movew %/d0,%1@\n\t" + "nop \n" +"2: moveq #1,%0\n" +"Lberr: movel %/d1,%/sp" + : "=&d" (ret) + : "a" (regp), "a" (&vbr[2]), "rm" (wordflag), "rm" (writeflag) + : "d0", "d1", "memory" + ); + + vbr[2] = save_berr; + local_irq_restore(flags); + + return ret; +} + +static const struct net_device_ops lance_netdev_ops = { + .ndo_open = lance_open, + .ndo_stop = lance_close, + .ndo_start_xmit = lance_start_xmit, + .ndo_set_multicast_list = set_multicast_list, + .ndo_set_mac_address = lance_set_mac_address, + .ndo_tx_timeout = lance_tx_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, +}; + +static unsigned long __init lance_probe1( struct net_device *dev, + struct lance_addr *init_rec ) +{ + volatile unsigned short *memaddr = + (volatile unsigned short *)init_rec->memaddr; + volatile unsigned short *ioaddr = + (volatile unsigned short *)init_rec->ioaddr; + struct lance_private *lp; + struct lance_ioreg *IO; + int i; + static int did_version; + unsigned short save1, save2; + + PROBE_PRINT(( "Probing for Lance card at mem %#lx io %#lx\n", + (long)memaddr, (long)ioaddr )); + + /* Test whether memory readable and writable */ + PROBE_PRINT(( "lance_probe1: testing memory to be accessible\n" )); + if (!addr_accessible( memaddr, 1, 1 )) goto probe_fail; + + /* Written values should come back... */ + PROBE_PRINT(( "lance_probe1: testing memory to be writable (1)\n" )); + save1 = *memaddr; + *memaddr = 0x0001; + if (*memaddr != 0x0001) goto probe_fail; + PROBE_PRINT(( "lance_probe1: testing memory to be writable (2)\n" )); + *memaddr = 0x0000; + if (*memaddr != 0x0000) goto probe_fail; + *memaddr = save1; + + /* First port should be readable and writable */ + PROBE_PRINT(( "lance_probe1: testing ioport to be accessible\n" )); + if (!addr_accessible( ioaddr, 1, 1 )) goto probe_fail; + + /* and written values should be readable */ + PROBE_PRINT(( "lance_probe1: testing ioport to be writeable\n" )); + save2 = ioaddr[1]; + ioaddr[1] = 0x0001; + if (ioaddr[1] != 0x0001) goto probe_fail; + + /* The CSR0_INIT bit should not be readable */ + PROBE_PRINT(( "lance_probe1: testing CSR0 register function (1)\n" )); + save1 = ioaddr[0]; + ioaddr[1] = CSR0; + ioaddr[0] = CSR0_INIT | CSR0_STOP; + if (ioaddr[0] != CSR0_STOP) { + ioaddr[0] = save1; + ioaddr[1] = save2; + goto probe_fail; + } + PROBE_PRINT(( "lance_probe1: testing CSR0 register function (2)\n" )); + ioaddr[0] = CSR0_STOP; + if (ioaddr[0] != CSR0_STOP) { + ioaddr[0] = save1; + ioaddr[1] = save2; + goto probe_fail; + } + + /* Now ok... */ + PROBE_PRINT(( "lance_probe1: Lance card detected\n" )); + goto probe_ok; + + probe_fail: + return 0; + + probe_ok: + lp = netdev_priv(dev); + MEM = (struct lance_memory *)memaddr; + IO = lp->iobase = (struct lance_ioreg *)ioaddr; + dev->base_addr = (unsigned long)ioaddr; /* informational only */ + lp->memcpy_f = init_rec->slow_flag ? slow_memcpy : memcpy; + + REGA( CSR0 ) = CSR0_STOP; + + /* Now test for type: If the eeprom I/O port is readable, it is a + * PAM card */ + if (addr_accessible( &(IO->eeprom), 0, 0 )) { + /* Switch back to Ram */ + i = IO->mem; + lp->cardtype = PAM_CARD; + } + else if (*RIEBL_MAGIC_ADDR == RIEBL_MAGIC) { + lp->cardtype = NEW_RIEBL; + } + else + lp->cardtype = OLD_RIEBL; + + if (lp->cardtype == PAM_CARD || + memaddr == (unsigned short *)0xffe00000) { + /* PAMs card and Riebl on ST use level 5 autovector */ + if (request_irq(IRQ_AUTO_5, lance_interrupt, IRQ_TYPE_PRIO, + "PAM,Riebl-ST Ethernet", dev)) { + printk( "Lance: request for irq %d failed\n", IRQ_AUTO_5 ); + return 0; + } + dev->irq = (unsigned short)IRQ_AUTO_5; + } + else { + /* For VME-RieblCards, request a free VME int; + * (This must be unsigned long, since dev->irq is short and the + * IRQ_MACHSPEC bit would be cut off...) + */ + unsigned long irq = atari_register_vme_int(); + if (!irq) { + printk( "Lance: request for VME interrupt failed\n" ); + return 0; + } + if (request_irq(irq, lance_interrupt, IRQ_TYPE_PRIO, + "Riebl-VME Ethernet", dev)) { + printk( "Lance: request for irq %ld failed\n", irq ); + return 0; + } + dev->irq = irq; + } + + printk("%s: %s at io %#lx, mem %#lx, irq %d%s, hwaddr ", + dev->name, lance_names[lp->cardtype], + (unsigned long)ioaddr, + (unsigned long)memaddr, + dev->irq, + init_rec->slow_flag ? " (slow memcpy)" : "" ); + + /* Get the ethernet address */ + switch( lp->cardtype ) { + case OLD_RIEBL: + /* No ethernet address! (Set some default address) */ + memcpy( dev->dev_addr, OldRieblDefHwaddr, 6 ); + break; + case NEW_RIEBL: + lp->memcpy_f( dev->dev_addr, RIEBL_HWADDR_ADDR, 6 ); + break; + case PAM_CARD: + i = IO->eeprom; + for( i = 0; i < 6; ++i ) + dev->dev_addr[i] = + ((((unsigned short *)MEM)[i*2] & 0x0f) << 4) | + ((((unsigned short *)MEM)[i*2+1] & 0x0f)); + i = IO->mem; + break; + } + printk("%pM\n", dev->dev_addr); + if (lp->cardtype == OLD_RIEBL) { + printk( "%s: Warning: This is a default ethernet address!\n", + dev->name ); + printk( " Use \"ifconfig hw ether ...\" to set the address.\n" ); + } + + spin_lock_init(&lp->devlock); + + MEM->init.mode = 0x0000; /* Disable Rx and Tx. */ + for( i = 0; i < 6; i++ ) + MEM->init.hwaddr[i] = dev->dev_addr[i^1]; /* <- 16 bit swap! */ + MEM->init.filter[0] = 0x00000000; + MEM->init.filter[1] = 0x00000000; + MEM->init.rx_ring.adr_lo = offsetof( struct lance_memory, rx_head ); + MEM->init.rx_ring.adr_hi = 0; + MEM->init.rx_ring.len = RX_RING_LEN_BITS; + MEM->init.tx_ring.adr_lo = offsetof( struct lance_memory, tx_head ); + MEM->init.tx_ring.adr_hi = 0; + MEM->init.tx_ring.len = TX_RING_LEN_BITS; + + if (lp->cardtype == PAM_CARD) + IO->ivec = IRQ_SOURCE_TO_VECTOR(dev->irq); + else + *RIEBL_IVEC_ADDR = IRQ_SOURCE_TO_VECTOR(dev->irq); + + if (did_version++ == 0) + DPRINTK( 1, ( version )); + + dev->netdev_ops = &lance_netdev_ops; + + /* XXX MSch */ + dev->watchdog_timeo = TX_TIMEOUT; + + return 1; +} + + +static int lance_open( struct net_device *dev ) +{ + struct lance_private *lp = netdev_priv(dev); + struct lance_ioreg *IO = lp->iobase; + int i; + + DPRINTK( 2, ( "%s: lance_open()\n", dev->name )); + + lance_init_ring(dev); + /* Re-initialize the LANCE, and start it when done. */ + + REGA( CSR3 ) = CSR3_BSWP | (lp->cardtype == PAM_CARD ? CSR3_ACON : 0); + REGA( CSR2 ) = 0; + REGA( CSR1 ) = 0; + REGA( CSR0 ) = CSR0_INIT; + /* From now on, AREG is kept to point to CSR0 */ + + i = 1000000; + while (--i > 0) + if (DREG & CSR0_IDON) + break; + if (i <= 0 || (DREG & CSR0_ERR)) { + DPRINTK( 2, ( "lance_open(): opening %s failed, i=%d, csr0=%04x\n", + dev->name, i, DREG )); + DREG = CSR0_STOP; + return -EIO; + } + DREG = CSR0_IDON; + DREG = CSR0_STRT; + DREG = CSR0_INEA; + + netif_start_queue (dev); + + DPRINTK( 2, ( "%s: LANCE is open, csr0 %04x\n", dev->name, DREG )); + + return 0; +} + + +/* Initialize the LANCE Rx and Tx rings. */ + +static void lance_init_ring( struct net_device *dev ) +{ + struct lance_private *lp = netdev_priv(dev); + int i; + unsigned offset; + + lp->tx_full = 0; + lp->cur_rx = lp->cur_tx = 0; + lp->dirty_tx = 0; + + offset = offsetof( struct lance_memory, packet_area ); + +/* If the packet buffer at offset 'o' would conflict with the reserved area + * of RieblCards, advance it */ +#define CHECK_OFFSET(o) \ + do { \ + if (lp->cardtype == OLD_RIEBL || lp->cardtype == NEW_RIEBL) { \ + if (((o) < RIEBL_RSVD_START) ? (o)+PKT_BUF_SZ > RIEBL_RSVD_START \ + : (o) < RIEBL_RSVD_END) \ + (o) = RIEBL_RSVD_END; \ + } \ + } while(0) + + for( i = 0; i < TX_RING_SIZE; i++ ) { + CHECK_OFFSET(offset); + MEM->tx_head[i].base = offset; + MEM->tx_head[i].flag = TMD1_OWN_HOST; + MEM->tx_head[i].base_hi = 0; + MEM->tx_head[i].length = 0; + MEM->tx_head[i].misc = 0; + offset += PKT_BUF_SZ; + } + + for( i = 0; i < RX_RING_SIZE; i++ ) { + CHECK_OFFSET(offset); + MEM->rx_head[i].base = offset; + MEM->rx_head[i].flag = TMD1_OWN_CHIP; + MEM->rx_head[i].base_hi = 0; + MEM->rx_head[i].buf_length = -PKT_BUF_SZ; + MEM->rx_head[i].msg_length = 0; + offset += PKT_BUF_SZ; + } +} + + +/* XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */ + + +static void lance_tx_timeout (struct net_device *dev) +{ + struct lance_private *lp = netdev_priv(dev); + struct lance_ioreg *IO = lp->iobase; + + AREG = CSR0; + DPRINTK( 1, ( "%s: transmit timed out, status %04x, resetting.\n", + dev->name, DREG )); + DREG = CSR0_STOP; + /* + * Always set BSWP after a STOP as STOP puts it back into + * little endian mode. + */ + REGA( CSR3 ) = CSR3_BSWP | (lp->cardtype == PAM_CARD ? CSR3_ACON : 0); + dev->stats.tx_errors++; +#ifndef final_version + { int i; + DPRINTK( 2, ( "Ring data: dirty_tx %d cur_tx %d%s cur_rx %d\n", + lp->dirty_tx, lp->cur_tx, + lp->tx_full ? " (full)" : "", + lp->cur_rx )); + for( i = 0 ; i < RX_RING_SIZE; i++ ) + DPRINTK( 2, ( "rx #%d: base=%04x blen=%04x mlen=%04x\n", + i, MEM->rx_head[i].base, + -MEM->rx_head[i].buf_length, + MEM->rx_head[i].msg_length )); + for( i = 0 ; i < TX_RING_SIZE; i++ ) + DPRINTK( 2, ( "tx #%d: base=%04x len=%04x misc=%04x\n", + i, MEM->tx_head[i].base, + -MEM->tx_head[i].length, + MEM->tx_head[i].misc )); + } +#endif + /* XXX MSch: maybe purge/reinit ring here */ + /* lance_restart, essentially */ + lance_init_ring(dev); + REGA( CSR0 ) = CSR0_INEA | CSR0_INIT | CSR0_STRT; + dev->trans_start = jiffies; /* prevent tx timeout */ + netif_wake_queue(dev); +} + +/* XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */ + +static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev ) +{ + struct lance_private *lp = netdev_priv(dev); + struct lance_ioreg *IO = lp->iobase; + int entry, len; + struct lance_tx_head *head; + unsigned long flags; + + DPRINTK( 2, ( "%s: lance_start_xmit() called, csr0 %4.4x.\n", + dev->name, DREG )); + + + /* The old LANCE chips doesn't automatically pad buffers to min. size. */ + len = skb->len; + if (len < ETH_ZLEN) + len = ETH_ZLEN; + /* PAM-Card has a bug: Can only send packets with even number of bytes! */ + else if (lp->cardtype == PAM_CARD && (len & 1)) + ++len; + + if (len > skb->len) { + if (skb_padto(skb, len)) + return NETDEV_TX_OK; + } + + netif_stop_queue (dev); + + /* Fill in a Tx ring entry */ + if (lance_debug >= 3) { + printk( "%s: TX pkt type 0x%04x from %pM to %pM" + " data at 0x%08x len %d\n", + dev->name, ((u_short *)skb->data)[6], + &skb->data[6], skb->data, + (int)skb->data, (int)skb->len ); + } + + /* We're not prepared for the int until the last flags are set/reset. And + * the int may happen already after setting the OWN_CHIP... */ + spin_lock_irqsave (&lp->devlock, flags); + + /* Mask to ring buffer boundary. */ + entry = lp->cur_tx & TX_RING_MOD_MASK; + head = &(MEM->tx_head[entry]); + + /* Caution: the write order is important here, set the "ownership" bits + * last. + */ + + + head->length = -len; + head->misc = 0; + lp->memcpy_f( PKTBUF_ADDR(head), (void *)skb->data, skb->len ); + head->flag = TMD1_OWN_CHIP | TMD1_ENP | TMD1_STP; + dev->stats.tx_bytes += skb->len; + dev_kfree_skb( skb ); + lp->cur_tx++; + while( lp->cur_tx >= TX_RING_SIZE && lp->dirty_tx >= TX_RING_SIZE ) { + lp->cur_tx -= TX_RING_SIZE; + lp->dirty_tx -= TX_RING_SIZE; + } + + /* Trigger an immediate send poll. */ + DREG = CSR0_INEA | CSR0_TDMD; + + if ((MEM->tx_head[(entry+1) & TX_RING_MOD_MASK].flag & TMD1_OWN) == + TMD1_OWN_HOST) + netif_start_queue (dev); + else + lp->tx_full = 1; + spin_unlock_irqrestore (&lp->devlock, flags); + + return NETDEV_TX_OK; +} + +/* The LANCE interrupt handler. */ + +static irqreturn_t lance_interrupt( int irq, void *dev_id ) +{ + struct net_device *dev = dev_id; + struct lance_private *lp; + struct lance_ioreg *IO; + int csr0, boguscnt = 10; + int handled = 0; + + if (dev == NULL) { + DPRINTK( 1, ( "lance_interrupt(): interrupt for unknown device.\n" )); + return IRQ_NONE; + } + + lp = netdev_priv(dev); + IO = lp->iobase; + spin_lock (&lp->devlock); + + AREG = CSR0; + + while( ((csr0 = DREG) & (CSR0_ERR | CSR0_TINT | CSR0_RINT)) && + --boguscnt >= 0) { + handled = 1; + /* Acknowledge all of the current interrupt sources ASAP. */ + DREG = csr0 & ~(CSR0_INIT | CSR0_STRT | CSR0_STOP | + CSR0_TDMD | CSR0_INEA); + + DPRINTK( 2, ( "%s: interrupt csr0=%04x new csr=%04x.\n", + dev->name, csr0, DREG )); + + if (csr0 & CSR0_RINT) /* Rx interrupt */ + lance_rx( dev ); + + if (csr0 & CSR0_TINT) { /* Tx-done interrupt */ + int dirty_tx = lp->dirty_tx; + + while( dirty_tx < lp->cur_tx) { + int entry = dirty_tx & TX_RING_MOD_MASK; + int status = MEM->tx_head[entry].flag; + + if (status & TMD1_OWN_CHIP) + break; /* It still hasn't been Txed */ + + MEM->tx_head[entry].flag = 0; + + if (status & TMD1_ERR) { + /* There was an major error, log it. */ + int err_status = MEM->tx_head[entry].misc; + dev->stats.tx_errors++; + if (err_status & TMD3_RTRY) dev->stats.tx_aborted_errors++; + if (err_status & TMD3_LCAR) dev->stats.tx_carrier_errors++; + if (err_status & TMD3_LCOL) dev->stats.tx_window_errors++; + if (err_status & TMD3_UFLO) { + /* Ackk! On FIFO errors the Tx unit is turned off! */ + dev->stats.tx_fifo_errors++; + /* Remove this verbosity later! */ + DPRINTK( 1, ( "%s: Tx FIFO error! Status %04x\n", + dev->name, csr0 )); + /* Restart the chip. */ + DREG = CSR0_STRT; + } + } else { + if (status & (TMD1_MORE | TMD1_ONE | TMD1_DEF)) + dev->stats.collisions++; + dev->stats.tx_packets++; + } + + /* XXX MSch: free skb?? */ + dirty_tx++; + } + +#ifndef final_version + if (lp->cur_tx - dirty_tx >= TX_RING_SIZE) { + DPRINTK( 0, ( "out-of-sync dirty pointer," + " %d vs. %d, full=%ld.\n", + dirty_tx, lp->cur_tx, lp->tx_full )); + dirty_tx += TX_RING_SIZE; + } +#endif + + if (lp->tx_full && (netif_queue_stopped(dev)) && + dirty_tx > lp->cur_tx - TX_RING_SIZE + 2) { + /* The ring is no longer full, clear tbusy. */ + lp->tx_full = 0; + netif_wake_queue (dev); + } + + lp->dirty_tx = dirty_tx; + } + + /* Log misc errors. */ + if (csr0 & CSR0_BABL) dev->stats.tx_errors++; /* Tx babble. */ + if (csr0 & CSR0_MISS) dev->stats.rx_errors++; /* Missed a Rx frame. */ + if (csr0 & CSR0_MERR) { + DPRINTK( 1, ( "%s: Bus master arbitration failure (?!?), " + "status %04x.\n", dev->name, csr0 )); + /* Restart the chip. */ + DREG = CSR0_STRT; + } + } + + /* Clear any other interrupt, and set interrupt enable. */ + DREG = CSR0_BABL | CSR0_CERR | CSR0_MISS | CSR0_MERR | + CSR0_IDON | CSR0_INEA; + + DPRINTK( 2, ( "%s: exiting interrupt, csr0=%#04x.\n", + dev->name, DREG )); + + spin_unlock (&lp->devlock); + return IRQ_RETVAL(handled); +} + + +static int lance_rx( struct net_device *dev ) +{ + struct lance_private *lp = netdev_priv(dev); + int entry = lp->cur_rx & RX_RING_MOD_MASK; + int i; + + DPRINTK( 2, ( "%s: rx int, flag=%04x\n", dev->name, + MEM->rx_head[entry].flag )); + + /* If we own the next entry, it's a new packet. Send it up. */ + while( (MEM->rx_head[entry].flag & RMD1_OWN) == RMD1_OWN_HOST ) { + struct lance_rx_head *head = &(MEM->rx_head[entry]); + int status = head->flag; + + if (status != (RMD1_ENP|RMD1_STP)) { /* There was an error. */ + /* There is a tricky error noted by John Murphy, + <murf@perftech.com> to Russ Nelson: Even with full-sized + buffers it's possible for a jabber packet to use two + buffers, with only the last correctly noting the error. */ + if (status & RMD1_ENP) /* Only count a general error at the */ + dev->stats.rx_errors++; /* end of a packet.*/ + if (status & RMD1_FRAM) dev->stats.rx_frame_errors++; + if (status & RMD1_OFLO) dev->stats.rx_over_errors++; + if (status & RMD1_CRC) dev->stats.rx_crc_errors++; + if (status & RMD1_BUFF) dev->stats.rx_fifo_errors++; + head->flag &= (RMD1_ENP|RMD1_STP); + } else { + /* Malloc up new buffer, compatible with net-3. */ + short pkt_len = head->msg_length & 0xfff; + struct sk_buff *skb; + + if (pkt_len < 60) { + printk( "%s: Runt packet!\n", dev->name ); + dev->stats.rx_errors++; + } + else { + skb = dev_alloc_skb( pkt_len+2 ); + if (skb == NULL) { + DPRINTK( 1, ( "%s: Memory squeeze, deferring packet.\n", + dev->name )); + for( i = 0; i < RX_RING_SIZE; i++ ) + if (MEM->rx_head[(entry+i) & RX_RING_MOD_MASK].flag & + RMD1_OWN_CHIP) + break; + + if (i > RX_RING_SIZE - 2) { + dev->stats.rx_dropped++; + head->flag |= RMD1_OWN_CHIP; + lp->cur_rx++; + } + break; + } + + if (lance_debug >= 3) { + u_char *data = PKTBUF_ADDR(head); + + printk(KERN_DEBUG "%s: RX pkt type 0x%04x from %pM to %pM " + "data %02x %02x %02x %02x %02x %02x %02x %02x " + "len %d\n", + dev->name, ((u_short *)data)[6], + &data[6], data, + data[15], data[16], data[17], data[18], + data[19], data[20], data[21], data[22], + pkt_len); + } + + skb_reserve( skb, 2 ); /* 16 byte align */ + skb_put( skb, pkt_len ); /* Make room */ + lp->memcpy_f( skb->data, PKTBUF_ADDR(head), pkt_len ); + skb->protocol = eth_type_trans( skb, dev ); + netif_rx( skb ); + dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len; + } + } + + head->flag |= RMD1_OWN_CHIP; + entry = (++lp->cur_rx) & RX_RING_MOD_MASK; + } + lp->cur_rx &= RX_RING_MOD_MASK; + + /* From lance.c (Donald Becker): */ + /* We should check that at least two ring entries are free. If not, + we should free one and mark stats->rx_dropped++. */ + + return 0; +} + + +static int lance_close( struct net_device *dev ) +{ + struct lance_private *lp = netdev_priv(dev); + struct lance_ioreg *IO = lp->iobase; + + netif_stop_queue (dev); + + AREG = CSR0; + + DPRINTK( 2, ( "%s: Shutting down ethercard, status was %2.2x.\n", + dev->name, DREG )); + + /* We stop the LANCE here -- it occasionally polls + memory if we don't. */ + DREG = CSR0_STOP; + + return 0; +} + + +/* Set or clear the multicast filter for this adaptor. + num_addrs == -1 Promiscuous mode, receive all packets + num_addrs == 0 Normal mode, clear multicast list + num_addrs > 0 Multicast mode, receive normal and MC packets, and do + best-effort filtering. + */ + +static void set_multicast_list( struct net_device *dev ) +{ + struct lance_private *lp = netdev_priv(dev); + struct lance_ioreg *IO = lp->iobase; + + if (netif_running(dev)) + /* Only possible if board is already started */ + return; + + /* We take the simple way out and always enable promiscuous mode. */ + DREG = CSR0_STOP; /* Temporarily stop the lance. */ + + if (dev->flags & IFF_PROMISC) { + /* Log any net taps. */ + DPRINTK( 2, ( "%s: Promiscuous mode enabled.\n", dev->name )); + REGA( CSR15 ) = 0x8000; /* Set promiscuous mode */ + } else { + short multicast_table[4]; + int num_addrs = netdev_mc_count(dev); + int i; + /* We don't use the multicast table, but rely on upper-layer + * filtering. */ + memset( multicast_table, (num_addrs == 0) ? 0 : -1, + sizeof(multicast_table) ); + for( i = 0; i < 4; i++ ) + REGA( CSR8+i ) = multicast_table[i]; + REGA( CSR15 ) = 0; /* Unset promiscuous mode */ + } + + /* + * Always set BSWP after a STOP as STOP puts it back into + * little endian mode. + */ + REGA( CSR3 ) = CSR3_BSWP | (lp->cardtype == PAM_CARD ? CSR3_ACON : 0); + + /* Resume normal operation and reset AREG to CSR0 */ + REGA( CSR0 ) = CSR0_IDON | CSR0_INEA | CSR0_STRT; +} + + +/* This is needed for old RieblCards and possible for new RieblCards */ + +static int lance_set_mac_address( struct net_device *dev, void *addr ) +{ + struct lance_private *lp = netdev_priv(dev); + struct sockaddr *saddr = addr; + int i; + + if (lp->cardtype != OLD_RIEBL && lp->cardtype != NEW_RIEBL) + return -EOPNOTSUPP; + + if (netif_running(dev)) { + /* Only possible while card isn't started */ + DPRINTK( 1, ( "%s: hwaddr can be set only while card isn't open.\n", + dev->name )); + return -EIO; + } + + memcpy( dev->dev_addr, saddr->sa_data, dev->addr_len ); + for( i = 0; i < 6; i++ ) + MEM->init.hwaddr[i] = dev->dev_addr[i^1]; /* <- 16 bit swap! */ + lp->memcpy_f( RIEBL_HWADDR_ADDR, dev->dev_addr, 6 ); + /* set also the magic for future sessions */ + *RIEBL_MAGIC_ADDR = RIEBL_MAGIC; + + return 0; +} + + +#ifdef MODULE +static struct net_device *atarilance_dev; + +static int __init atarilance_module_init(void) +{ + atarilance_dev = atarilance_probe(-1); + if (IS_ERR(atarilance_dev)) + return PTR_ERR(atarilance_dev); + return 0; +} + +static void __exit atarilance_module_exit(void) +{ + unregister_netdev(atarilance_dev); + free_irq(atarilance_dev->irq, atarilance_dev); + free_netdev(atarilance_dev); +} +module_init(atarilance_module_init); +module_exit(atarilance_module_exit); +#endif /* MODULE */ + + +/* + * Local variables: + * c-indent-level: 4 + * tab-width: 4 + * End: + */ |