Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Another merge window, another set of networking changes.  I've heard
  rumblings that the lightweight tunnels infrastructure has been voted
  networking change of the year.  But what do I know?

   1) Add conntrack support to openvswitch, from Joe Stringer.

   2) Initial support for VRF (Virtual Routing and Forwarding), which
      allows the segmentation of routing paths without using multiple
      devices.  There are some semantic kinks to work out still, but
      this is a reasonably strong foundation.  From David Ahern.

   3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.

   4) Ignore route nexthops with a link down state in ipv6, just like
      ipv4.  From Andy Gospodarek.

   5) Remove spinlock from fast path of act_gact and act_mirred, from
      Eric Dumazet.

   6) Document the DSA layer, from Florian Fainelli.

   7) Add netconsole support to bcmgenet, systemport, and DSA.  Also
      from Florian Fainelli.

   8) Add Mellanox Switch Driver and core infrastructure, from Jiri
      Pirko.

   9) Add support for "light weight tunnels", which allow for
      encapsulation and decapsulation without bearing the overhead of a
      full blown netdevice.  From Thomas Graf, Jiri Benc, and a cast of
      others.

  10) Add Identifier Locator Addressing support for ipv6, from Tom
      Herbert.

  11) Support fragmented SKBs in iwlwifi, from Johannes Berg.

  12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.

  13) Add BQL support to 3c59x driver, from Loganaden Velvindron.

  14) Stop using a zero TX queue length to mean that a device shouldn't
      have a qdisc attached, use an explicit flag instead.  From Phil
      Sutter.

  15) Use generic geneve netdevice infrastructure in openvswitch, from
      Pravin B Shelar.

  16) Add infrastructure to avoid re-forwarding a packet in software
      that was already forwarded by a hardware switch.  From Scott
      Feldman.

  17) Allow AF_PACKET fanout function to be implemented in a bpf
      program, from Willem de Bruijn"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
  netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
  netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
  net: fec: clear receive interrupts before processing a packet
  ipv6: fix exthdrs offload registration in out_rt path
  xen-netback: add support for multicast control
  bgmac: Update fixed_phy_register()
  sock, diag: fix panic in sock_diag_put_filterinfo
  flow_dissector: Use 'const' where possible.
  flow_dissector: Fix function argument ordering dependency
  ixgbe: Resolve "initialized field overwritten" warnings
  ixgbe: Remove bimodal SR-IOV disabling
  ixgbe: Add support for reporting 2.5G link speed
  ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
  ixgbe: support for ethtool set_rxfh
  ixgbe: Avoid needless PHY access on copper phys
  ixgbe: cleanup to use cached mask value
  ixgbe: Remove second instance of lan_id variable
  ixgbe: use kzalloc for allocating one thing
  flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
  ixgbe: Remove unused PCI bus types
  ...

1 files changed, 66 insertions, 5 deletions

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index 03b7404..b7d32e8 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -1,6 +1,8 @@
-/* bnx2x_cmn.h: Broadcom Everest network driver.
+/* bnx2x_cmn.h: QLogic Everest network driver.
  *
  * Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -620,6 +622,14 @@ int bnx2x_set_features(struct net_device *dev, netdev_features_t features);
  */
 void bnx2x_tx_timeout(struct net_device *dev);
 
+/** bnx2x_get_c2s_mapping - read inner-to-outer vlan configuration
+ * c2s_map should have BNX2X_MAX_PRIORITY entries.
+ * @bp:			driver handle
+ * @c2s_map:		should have BNX2X_MAX_PRIORITY entries for mapping
+ * @c2s_default:	entry for non-tagged configuration
+ */
+void bnx2x_get_c2s_mapping(struct bnx2x *bp, u8 *c2s_map, u8 *c2s_default);
+
 /*********************** Inlines **********************************/
 /*********************** Fast path ********************************/
 static inline void bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp)
@@ -931,14 +941,35 @@ static inline int bnx2x_func_start(struct bnx2x *bp)
 	start_params->mf_mode = bp->mf_mode;
 	start_params->sd_vlan_tag = bp->mf_ov;
 
+	/* Configure Ethertype for BD mode */
+	if (IS_MF_BD(bp)) {
+		DP(NETIF_MSG_IFUP, "Configuring ethertype 0x88a8 for BD\n");
+		start_params->sd_vlan_eth_type = ETH_P_8021AD;
+		REG_WR(bp, PRS_REG_VLAN_TYPE_0, ETH_P_8021AD);
+		REG_WR(bp, PBF_REG_VLAN_TYPE_0, ETH_P_8021AD);
+		REG_WR(bp, NIG_REG_LLH_E1HOV_TYPE_1, ETH_P_8021AD);
+
+		bnx2x_get_c2s_mapping(bp, start_params->c2s_pri,
+				      &start_params->c2s_pri_default);
+		start_params->c2s_pri_valid = 1;
+
+		DP(NETIF_MSG_IFUP,
+		   "Inner-to-Outer priority: %02x %02x %02x %02x %02x %02x %02x %02x [Default %02x]\n",
+		   start_params->c2s_pri[0], start_params->c2s_pri[1],
+		   start_params->c2s_pri[2], start_params->c2s_pri[3],
+		   start_params->c2s_pri[4], start_params->c2s_pri[5],
+		   start_params->c2s_pri[6], start_params->c2s_pri[7],
+		   start_params->c2s_pri_default);
+	}
+
 	if (CHIP_IS_E2(bp) || CHIP_IS_E3(bp))
 		start_params->network_cos_mode = STATIC_COS;
 	else /* CHIP_IS_E1X */
 		start_params->network_cos_mode = FW_WRR;
 
-	start_params->tunnel_mode	= TUNN_MODE_GRE;
-	start_params->gre_tunnel_type	= IPGRE_TUNNEL;
-	start_params->inner_gre_rss_en	= 1;
+	start_params->vxlan_dst_port = bp->vxlan_dst_port;
+
+	start_params->inner_rss = 1;
 
 	if (IS_MF_UFP(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp)) {
 		start_params->class_fail_ethtype = ETH_P_FIP;
@@ -1037,6 +1068,15 @@ static inline void bnx2x_init_vlan_mac_fp_objs(struct bnx2x_fastpath *fp,
 			   BNX2X_FILTER_MAC_PENDING,
 			   &bp->sp_state, obj_type,
 			   &bp->macs_pool);
+
+	if (!CHIP_IS_E1x(bp))
+		bnx2x_init_vlan_obj(bp, &bnx2x_sp_obj(bp, fp).vlan_obj,
+				    fp->cl_id, fp->cid, BP_FUNC(bp),
+				    bnx2x_sp(bp, vlan_rdata),
+				    bnx2x_sp_mapping(bp, vlan_rdata),
+				    BNX2X_FILTER_VLAN_PENDING,
+				    &bp->sp_state, obj_type,
+				    &bp->vlans_pool);
 }
 
 /**
@@ -1096,7 +1136,7 @@ static inline void bnx2x_init_bp_objs(struct bnx2x *bp)
 	bnx2x_init_mac_credit_pool(bp, &bp->macs_pool, BP_FUNC(bp),
 				   bnx2x_get_path_func_num(bp));
 
-	bnx2x_init_vlan_credit_pool(bp, &bp->vlans_pool, BP_ABS_FUNC(bp)>>1,
+	bnx2x_init_vlan_credit_pool(bp, &bp->vlans_pool, BP_FUNC(bp),
 				    bnx2x_get_path_func_num(bp));
 
 	/* RSS configuration object */
@@ -1106,6 +1146,8 @@ static inline void bnx2x_init_bp_objs(struct bnx2x *bp)
 				  bnx2x_sp_mapping(bp, rss_rdata),
 				  BNX2X_FILTER_RSS_CONF_PENDING, &bp->sp_state,
 				  BNX2X_OBJ_TYPE_RX);
+
+	bp->vlan_credit = PF_VLAN_CREDIT_E2(bp, bnx2x_get_path_func_num(bp));
 }
 
 static inline u8 bnx2x_fp_qzone_id(struct bnx2x_fastpath *fp)
@@ -1339,4 +1381,23 @@ void bnx2x_squeeze_objects(struct bnx2x *bp);
 void bnx2x_schedule_sp_rtnl(struct bnx2x*, enum sp_rtnl_flag,
 			    u32 verbose);
 
+/**
+ * bnx2x_set_os_driver_state - write driver state for management FW usage
+ *
+ * @bp:		driver handle
+ * @state:	OS_DRIVER_STATE_* value reflecting current driver state
+ */
+void bnx2x_set_os_driver_state(struct bnx2x *bp, u32 state);
+
+/**
+ * bnx2x_nvram_read - reads data from nvram [might sleep]
+ *
+ * @bp:		driver handle
+ * @offset:	byte offset in nvram
+ * @ret_buf:	pointer to buffer where data is to be stored
+ * @buf_size:   Length of 'ret_buf' in bytes
+ */
+int bnx2x_nvram_read(struct bnx2x *bp, u32 offset, u8 *ret_buf,
+		     int buf_size);
+
 #endif /* BNX2X_CMN_H */