Merge tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Bit a bit -fixes pull request in the merge window than usual dua to two
feauture-y things:
- Display CRCs are now enabled on all platforms, including the odd DP case
  on gm45/vlv. Since this is a testing-only feature it should ever hurt,
  but I figured it'll help with regression-testing -fixes. So I left it
  in and didn't postpone it to 3.14.
- Display power well refactoring from Imre. Would have caused major pain
  conflict with the bdw stage 1 patches if I'd postpone this to -next.
  It's only an relatively small interface rework, so shouldn't cause pain.
  It's also been in my tree since almost 3 weeks already.

That accounts for about two thirds of the pull, otherwise just bugfixes:
- vlv backlight fix from Jesse/Jani
- vlv vblank timestamp fix from Jesse
- improved edp detection through vbt from Ville (fixes a vlv issue)
- eDP vdd fix from Paulo
- fixes for dvo lvds on i830M
- a few smaller things all over

Note: This contains a backmerge of v3.12. Since the -internal branch
always applied on top of -nightly I need that unified base to merge bdw
patches. So you'll get a conflict with radeon connector props when pulling
this (and nouveau/master will also conflict a bit when Ben doesn't
rebase). The backmerge itself only had conflicts in drm/i915.

There's also a tiny conflict between Jani's backlight fix and your sysfs
lifetime fix in drm-next.

* tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel: (940 commits)
  drm/i915/vlv: use per-pipe backlight controls v2
  drm/i915: make backlight functions take a connector
  drm/i915: move opregion asle request handling to a work queue
  drm/i915/vlv: use PIPE_START_VBLANK interrupts on VLV
  drm/i915: Make intel_dp_is_edp() less specific
  drm/i915: Give names to the VBT child device type bits
  drm/i915/vlv: enable HDA display audio for Valleyview2
  drm/i915/dvo: call ->mode_set callback only when the port is running
  drm/i915: avoid unclaimed registers when capturing the error state
  drm/i915: Enable DP port CRC for the "auto" source on g4x/vlv
  drm/i915: scramble reset support for DP port CRC on vlv
  drm/i915: scramble reset support for DP port CRC on g4x
  drm/i916: add "auto" pipe CRC source
  ...

Conflicts:
	MAINTAINERS
	drivers/gpu/drm/i915/intel_panel.c
	drivers/gpu/drm/nouveau/core/subdev/mc/base.c
	drivers/gpu/drm/radeon/atombios_encoders.c
	drivers/gpu/drm/radeon/radeon_connectors.c

1 files changed, 25 insertions, 13 deletions

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h
index 76df015..c2dfea7 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h
@@ -640,23 +640,35 @@ static const struct {
  * [30] MCP Latched ump_tx_parity
  * [31] MCP Latched scpad_parity
  */
-#define MISC_AEU_ENABLE_MCP_PRTY_BITS	\
+#define MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS	\
 	(AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | \
 	 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | \
-	 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY | \
+	 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY)
+
+#define MISC_AEU_ENABLE_MCP_PRTY_BITS	\
+	(MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS | \
 	 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY)
 
 /* Below registers control the MCP parity attention output. When
  * MISC_AEU_ENABLE_MCP_PRTY_BITS are set - attentions are
  * enabled, when cleared - disabled.
  */
-static const u32 mcp_attn_ctl_regs[] = {
-	MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0,
-	MISC_REG_AEU_ENABLE4_NIG_0,
-	MISC_REG_AEU_ENABLE4_PXP_0,
-	MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0,
-	MISC_REG_AEU_ENABLE4_NIG_1,
-	MISC_REG_AEU_ENABLE4_PXP_1
+static const struct {
+	u32 addr;
+	u32 bits;
+} mcp_attn_ctl_regs[] = {
+	{ MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0,
+		MISC_AEU_ENABLE_MCP_PRTY_BITS },
+	{ MISC_REG_AEU_ENABLE4_NIG_0,
+		MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS },
+	{ MISC_REG_AEU_ENABLE4_PXP_0,
+		MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS },
+	{ MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0,
+		MISC_AEU_ENABLE_MCP_PRTY_BITS },
+	{ MISC_REG_AEU_ENABLE4_NIG_1,
+		MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS },
+	{ MISC_REG_AEU_ENABLE4_PXP_1,
+		MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS }
 };
 
 static inline void bnx2x_set_mcp_parity(struct bnx2x *bp, u8 enable)
@@ -665,14 +677,14 @@ static inline void bnx2x_set_mcp_parity(struct bnx2x *bp, u8 enable)
 	u32 reg_val;
 
 	for (i = 0; i < ARRAY_SIZE(mcp_attn_ctl_regs); i++) {
-		reg_val = REG_RD(bp, mcp_attn_ctl_regs[i]);
+		reg_val = REG_RD(bp, mcp_attn_ctl_regs[i].addr);
 
 		if (enable)
-			reg_val |= MISC_AEU_ENABLE_MCP_PRTY_BITS;
+			reg_val |= mcp_attn_ctl_regs[i].bits;
 		else
-			reg_val &= ~MISC_AEU_ENABLE_MCP_PRTY_BITS;
+			reg_val &= ~mcp_attn_ctl_regs[i].bits;
 
-		REG_WR(bp, mcp_attn_ctl_regs[i], reg_val);
+		REG_WR(bp, mcp_attn_ctl_regs[i].addr, reg_val);
 	}
 }