Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Another merge window, another set of networking changes.  I've heard
  rumblings that the lightweight tunnels infrastructure has been voted
  networking change of the year.  But what do I know?

   1) Add conntrack support to openvswitch, from Joe Stringer.

   2) Initial support for VRF (Virtual Routing and Forwarding), which
      allows the segmentation of routing paths without using multiple
      devices.  There are some semantic kinks to work out still, but
      this is a reasonably strong foundation.  From David Ahern.

   3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.

   4) Ignore route nexthops with a link down state in ipv6, just like
      ipv4.  From Andy Gospodarek.

   5) Remove spinlock from fast path of act_gact and act_mirred, from
      Eric Dumazet.

   6) Document the DSA layer, from Florian Fainelli.

   7) Add netconsole support to bcmgenet, systemport, and DSA.  Also
      from Florian Fainelli.

   8) Add Mellanox Switch Driver and core infrastructure, from Jiri
      Pirko.

   9) Add support for "light weight tunnels", which allow for
      encapsulation and decapsulation without bearing the overhead of a
      full blown netdevice.  From Thomas Graf, Jiri Benc, and a cast of
      others.

  10) Add Identifier Locator Addressing support for ipv6, from Tom
      Herbert.

  11) Support fragmented SKBs in iwlwifi, from Johannes Berg.

  12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.

  13) Add BQL support to 3c59x driver, from Loganaden Velvindron.

  14) Stop using a zero TX queue length to mean that a device shouldn't
      have a qdisc attached, use an explicit flag instead.  From Phil
      Sutter.

  15) Use generic geneve netdevice infrastructure in openvswitch, from
      Pravin B Shelar.

  16) Add infrastructure to avoid re-forwarding a packet in software
      that was already forwarded by a hardware switch.  From Scott
      Feldman.

  17) Allow AF_PACKET fanout function to be implemented in a bpf
      program, from Willem de Bruijn"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
  netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
  netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
  net: fec: clear receive interrupts before processing a packet
  ipv6: fix exthdrs offload registration in out_rt path
  xen-netback: add support for multicast control
  bgmac: Update fixed_phy_register()
  sock, diag: fix panic in sock_diag_put_filterinfo
  flow_dissector: Use 'const' where possible.
  flow_dissector: Fix function argument ordering dependency
  ixgbe: Resolve "initialized field overwritten" warnings
  ixgbe: Remove bimodal SR-IOV disabling
  ixgbe: Add support for reporting 2.5G link speed
  ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
  ixgbe: support for ethtool set_rxfh
  ixgbe: Avoid needless PHY access on copper phys
  ixgbe: cleanup to use cached mask value
  ixgbe: Remove second instance of lan_id variable
  ixgbe: use kzalloc for allocating one thing
  flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
  ixgbe: Remove unused PCI bus types
  ...

1 files changed, 53 insertions, 26 deletions

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
index 49d5110..4dead49 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
@@ -1,6 +1,8 @@
-/* bnx2x_reg.h: Broadcom Everest network driver.
+/* bnx2x_reg.h: Qlogic Everest network driver.
  *
  * Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -2137,6 +2139,10 @@
 /* [RW 1] When this bit is set; the LLH will expect all packets to be with
    e1hov */
 #define NIG_REG_LLH_E1HOV_MODE					 0x160d8
+/* [RW 16] Outer VLAN type identifier for multi-function mode. In non
+ * multi-function mode; it will hold the inner VLAN type. Typically 0x8100.
+ */
+#define NIG_REG_LLH_E1HOV_TYPE_1				 0x16028
 /* [RW 1] When this bit is set; the LLH will classify the packet before
    sending it to the BRB or calculating WoL on it. */
 #define NIG_REG_LLH_MF_MODE					 0x16024
@@ -2953,7 +2959,12 @@
 #define PBF_REG_TQ_OCCUPANCY_Q0					 0x1403ac
 /* [R 13] Number of 8 bytes lines occupied in the task queue of queue 1. */
 #define PBF_REG_TQ_OCCUPANCY_Q1					 0x1403b0
-#define PB_REG_CONTROL						 0
+/* [RW 16] One of 8 values that should be compared to type in Ethernet
+ * parsing. If there is a match; the field after Ethernet is the first VLAN.
+ * Reset value is 0x8100 which is the standard VLAN type. Note that when
+ * checking second VLAN; type is compared only to 0x8100.
+ */
+#define PBF_REG_VLAN_TYPE_0					 0x15c06c
 /* [RW 2] Interrupt mask register #0 read/write */
 #define PB_REG_PB_INT_MASK					 0x28
 /* [R 2] Interrupt register #0 read */
@@ -3372,6 +3383,12 @@
 #define PRS_REG_TCM_CURRENT_CREDIT				 0x40160
 /* [R 8] debug only: TSDM current credit. Transaction based. */
 #define PRS_REG_TSDM_CURRENT_CREDIT				 0x4015c
+/* [RW 16] One of 8 values that should be compared to type in Ethernet
+ * parsing. If there is a match; the field after Ethernet is the first VLAN.
+ * Reset value is 0x8100 which is the standard VLAN type. Note that when
+ * checking second VLAN; type is compared only to 0x8100.
+ */
+#define PRS_REG_VLAN_TYPE_0					 0x401a8
 #define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT			 (0x1<<19)
 #define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF			 (0x1<<20)
 #define PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN			 (0x1<<22)
@@ -7240,6 +7257,9 @@ Theotherbitsarereservedandshouldbezero*/
 #define MDIO_AN_REG_8481_LEGACY_MII_CTRL	0xffe0
 #define MDIO_AN_REG_8481_MII_CTRL_FORCE_1G	0x40
 #define MDIO_AN_REG_8481_LEGACY_MII_STATUS	0xffe1
+#define MDIO_AN_REG_848xx_ID_MSB		0xffe2
+#define BCM84858_PHY_ID					0x600d
+#define MDIO_AN_REG_848xx_ID_LSB		0xffe3
 #define MDIO_AN_REG_8481_LEGACY_AN_ADV		0xffe4
 #define MDIO_AN_REG_8481_LEGACY_AN_EXPANSION	0xffe6
 #define MDIO_AN_REG_8481_1000T_CTRL		0xffe9
@@ -7283,31 +7303,31 @@ Theotherbitsarereservedandshouldbezero*/
 #define MDIO_84833_TOP_CFG_FW_NO_EEE		0x1f81
 #define MDIO_84833_TOP_CFG_XGPHY_STRAP1			0x401a
 #define MDIO_84833_SUPER_ISOLATE		0x8000
-/* These are mailbox register set used by 84833. */
-#define MDIO_84833_TOP_CFG_SCRATCH_REG0			0x4005
-#define MDIO_84833_TOP_CFG_SCRATCH_REG1			0x4006
-#define MDIO_84833_TOP_CFG_SCRATCH_REG2			0x4007
-#define MDIO_84833_TOP_CFG_SCRATCH_REG3			0x4008
-#define MDIO_84833_TOP_CFG_SCRATCH_REG4			0x4009
-#define MDIO_84833_TOP_CFG_SCRATCH_REG26		0x4037
-#define MDIO_84833_TOP_CFG_SCRATCH_REG27		0x4038
-#define MDIO_84833_TOP_CFG_SCRATCH_REG28		0x4039
-#define MDIO_84833_TOP_CFG_SCRATCH_REG29		0x403a
-#define MDIO_84833_TOP_CFG_SCRATCH_REG30		0x403b
-#define MDIO_84833_TOP_CFG_SCRATCH_REG31		0x403c
-#define MDIO_84833_CMD_HDLR_COMMAND	MDIO_84833_TOP_CFG_SCRATCH_REG0
-#define MDIO_84833_CMD_HDLR_STATUS	MDIO_84833_TOP_CFG_SCRATCH_REG26
-#define MDIO_84833_CMD_HDLR_DATA1	MDIO_84833_TOP_CFG_SCRATCH_REG27
-#define MDIO_84833_CMD_HDLR_DATA2	MDIO_84833_TOP_CFG_SCRATCH_REG28
-#define MDIO_84833_CMD_HDLR_DATA3	MDIO_84833_TOP_CFG_SCRATCH_REG29
-#define MDIO_84833_CMD_HDLR_DATA4	MDIO_84833_TOP_CFG_SCRATCH_REG30
-#define MDIO_84833_CMD_HDLR_DATA5	MDIO_84833_TOP_CFG_SCRATCH_REG31
+/* These are mailbox register set used by 84833/84858. */
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG0			0x4005
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG1			0x4006
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG2			0x4007
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG3			0x4008
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG4			0x4009
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG26		0x4037
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG27		0x4038
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG28		0x4039
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG29		0x403a
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG30		0x403b
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG31		0x403c
+#define MDIO_848xx_CMD_HDLR_COMMAND	(MDIO_848xx_TOP_CFG_SCRATCH_REG0)
+#define MDIO_848xx_CMD_HDLR_STATUS	(MDIO_848xx_TOP_CFG_SCRATCH_REG26)
+#define MDIO_848xx_CMD_HDLR_DATA1	(MDIO_848xx_TOP_CFG_SCRATCH_REG27)
+#define MDIO_848xx_CMD_HDLR_DATA2	(MDIO_848xx_TOP_CFG_SCRATCH_REG28)
+#define MDIO_848xx_CMD_HDLR_DATA3	(MDIO_848xx_TOP_CFG_SCRATCH_REG29)
+#define MDIO_848xx_CMD_HDLR_DATA4	(MDIO_848xx_TOP_CFG_SCRATCH_REG30)
+#define MDIO_848xx_CMD_HDLR_DATA5	(MDIO_848xx_TOP_CFG_SCRATCH_REG31)
 
-/* Mailbox command set used by 84833. */
-#define PHY84833_CMD_SET_PAIR_SWAP			0x8001
-#define PHY84833_CMD_GET_EEE_MODE			0x8008
-#define PHY84833_CMD_SET_EEE_MODE			0x8009
-/* Mailbox status set used by 84833. */
+/* Mailbox command set used by 84833/84858 */
+#define PHY848xx_CMD_SET_PAIR_SWAP			0x8001
+#define PHY848xx_CMD_GET_EEE_MODE			0x8008
+#define PHY848xx_CMD_SET_EEE_MODE			0x8009
+/* Mailbox status set used by 84833 only */
 #define PHY84833_STATUS_CMD_RECEIVED			0x0001
 #define PHY84833_STATUS_CMD_IN_PROGRESS			0x0002
 #define PHY84833_STATUS_CMD_COMPLETE_PASS		0x0004
@@ -7318,6 +7338,13 @@ Theotherbitsarereservedandshouldbezero*/
 #define PHY84833_STATUS_CMD_CLEAR_COMPLETE		0x0080
 #define PHY84833_STATUS_CMD_OPEN_OVERRIDE		0xa5a5
 
+/* Mailbox status set used by 84858 only */
+#define PHY84858_STATUS_CMD_RECEIVED			0x0001
+#define PHY84858_STATUS_CMD_IN_PROGRESS			0x0002
+#define PHY84858_STATUS_CMD_COMPLETE_PASS		0x0004
+#define PHY84858_STATUS_CMD_COMPLETE_ERROR		0x0008
+#define PHY84858_STATUS_CMD_SYSTEM_BUSY			0xbbbb
+
 
 /* Warpcore clause 45 addressing */
 #define MDIO_WC_DEVAD					0x3