diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-10-02 20:38:27 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-10-02 20:38:27 (GMT) |
commit | aecdc33e111b2c447b622e287c6003726daa1426 (patch) | |
tree | 3e7657eae4b785e1a1fb5dfb225dbae0b2f0cfc6 /drivers/net/ethernet/chelsio/cxgb4 | |
parent | a20acf99f75e49271381d65db097c9763060a1e8 (diff) | |
parent | a3a6cab5ea10cca64d036851fe0d932448f2fe4f (diff) | |
download | linux-aecdc33e111b2c447b622e287c6003726daa1426.tar.xz |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking changes from David Miller:
1) GRE now works over ipv6, from Dmitry Kozlov.
2) Make SCTP more network namespace aware, from Eric Biederman.
3) TEAM driver now works with non-ethernet devices, from Jiri Pirko.
4) Make openvswitch network namespace aware, from Pravin B Shelar.
5) IPV6 NAT implementation, from Patrick McHardy.
6) Server side support for TCP Fast Open, from Jerry Chu and others.
7) Packet BPF filter supports MOD and XOR, from Eric Dumazet and Daniel
Borkmann.
8) Increate the loopback default MTU to 64K, from Eric Dumazet.
9) Use a per-task rather than per-socket page fragment allocator for
outgoing networking traffic. This benefits processes that have very
many mostly idle sockets, which is quite common.
From Eric Dumazet.
10) Use up to 32K for page fragment allocations, with fallbacks to
smaller sizes when higher order page allocations fail. Benefits are
a) less segments for driver to process b) less calls to page
allocator c) less waste of space.
From Eric Dumazet.
11) Allow GRO to be used on GRE tunnels, from Eric Dumazet.
12) VXLAN device driver, one way to handle VLAN issues such as the
limitation of 4096 VLAN IDs yet still have some level of isolation.
From Stephen Hemminger.
13) As usual there is a large boatload of driver changes, with the scale
perhaps tilted towards the wireless side this time around.
Fix up various fairly trivial conflicts, mostly caused by the user
namespace changes.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1012 commits)
hyperv: Add buffer for extended info after the RNDIS response message.
hyperv: Report actual status in receive completion packet
hyperv: Remove extra allocated space for recv_pkt_list elements
hyperv: Fix page buffer handling in rndis_filter_send_request()
hyperv: Fix the missing return value in rndis_filter_set_packet_filter()
hyperv: Fix the max_xfer_size in RNDIS initialization
vxlan: put UDP socket in correct namespace
vxlan: Depend on CONFIG_INET
sfc: Fix the reported priorities of different filter types
sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP
sfc: Fix loopback self-test with separate_tx_channels=1
sfc: Fix MCDI structure field lookup
sfc: Add parentheses around use of bitfield macro arguments
sfc: Fix null function pointer in efx_sriov_channel_type
vxlan: virtual extensible lan
igmp: export symbol ip_mc_leave_group
netlink: add attributes to fdb interface
tg3: unconditionally select HWMON support when tg3 is enabled.
Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT"
gre: fix sparse warning
...
Diffstat (limited to 'drivers/net/ethernet/chelsio/cxgb4')
-rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 51 | ||||
-rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 954 | ||||
-rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h | 2 | ||||
-rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/sge.c | 341 | ||||
-rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 734 | ||||
-rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4_hw.h | 80 | ||||
-rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4_regs.h | 185 | ||||
-rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h | 97 |
8 files changed, 2166 insertions, 278 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h index ec2dafe..745a1f5 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h @@ -67,12 +67,12 @@ enum { }; enum { - MEMWIN0_APERTURE = 65536, - MEMWIN0_BASE = 0x30000, + MEMWIN0_APERTURE = 2048, + MEMWIN0_BASE = 0x1b800, MEMWIN1_APERTURE = 32768, MEMWIN1_BASE = 0x28000, - MEMWIN2_APERTURE = 2048, - MEMWIN2_BASE = 0x1b800, + MEMWIN2_APERTURE = 65536, + MEMWIN2_BASE = 0x30000, }; enum dev_master { @@ -211,6 +211,9 @@ struct tp_err_stats { struct tp_params { unsigned int ntxchan; /* # of Tx channels */ unsigned int tre; /* log2 of core clocks per TP tick */ + + uint32_t dack_re; /* DACK timer resolution */ + unsigned short tx_modq[NCHAN]; /* channel to modulation queue map */ }; struct vpd_params { @@ -315,6 +318,10 @@ enum { /* adapter flags */ USING_MSI = (1 << 1), USING_MSIX = (1 << 2), FW_OK = (1 << 4), + RSS_TNLALLLOOKUP = (1 << 5), + USING_SOFT_PARAMS = (1 << 6), + MASTER_PF = (1 << 7), + FW_OFLD_CONN = (1 << 9), }; struct rx_sw_desc; @@ -467,6 +474,11 @@ struct sge { u16 rdma_rxq[NCHAN]; u16 timer_val[SGE_NTIMERS]; u8 counter_val[SGE_NCOUNTERS]; + u32 fl_pg_order; /* large page allocation size */ + u32 stat_len; /* length of status page at ring end */ + u32 pktshift; /* padding between CPL & packet data */ + u32 fl_align; /* response queue message alignment */ + u32 fl_starve_thres; /* Free List starvation threshold */ unsigned int starve_thres; u8 idma_state[2]; unsigned int egr_start; @@ -511,6 +523,8 @@ struct adapter { struct net_device *port[MAX_NPORTS]; u8 chan_map[NCHAN]; /* channel -> port map */ + unsigned int l2t_start; + unsigned int l2t_end; struct l2t_data *l2t; void *uld_handle[CXGB4_ULD_MAX]; struct list_head list_node; @@ -619,7 +633,7 @@ int t4_sge_alloc_ctrl_txq(struct adapter *adap, struct sge_ctrl_txq *txq, int t4_sge_alloc_ofld_txq(struct adapter *adap, struct sge_ofld_txq *txq, struct net_device *dev, unsigned int iqid); irqreturn_t t4_sge_intr_msix(int irq, void *cookie); -void t4_sge_init(struct adapter *adap); +int t4_sge_init(struct adapter *adap); void t4_sge_start(struct adapter *adap); void t4_sge_stop(struct adapter *adap); extern int dbfifo_int_thresh; @@ -638,6 +652,14 @@ static inline unsigned int us_to_core_ticks(const struct adapter *adap, return (us * adap->params.vpd.cclk) / 1000; } +static inline unsigned int core_ticks_to_us(const struct adapter *adapter, + unsigned int ticks) +{ + /* add Core Clock / 2 to round ticks to nearest uS */ + return ((ticks * 1000 + adapter->params.vpd.cclk/2) / + adapter->params.vpd.cclk); +} + void t4_set_reg_field(struct adapter *adap, unsigned int addr, u32 mask, u32 val); @@ -656,6 +678,9 @@ static inline int t4_wr_mbox_ns(struct adapter *adap, int mbox, const void *cmd, return t4_wr_mbox_meat(adap, mbox, cmd, size, rpl, false); } +void t4_write_indirect(struct adapter *adap, unsigned int addr_reg, + unsigned int data_reg, const u32 *vals, + unsigned int nregs, unsigned int start_idx); void t4_intr_enable(struct adapter *adapter); void t4_intr_disable(struct adapter *adapter); int t4_slow_intr_handler(struct adapter *adapter); @@ -664,8 +689,12 @@ int t4_wait_dev_ready(struct adapter *adap); int t4_link_start(struct adapter *adap, unsigned int mbox, unsigned int port, struct link_config *lc); int t4_restart_aneg(struct adapter *adap, unsigned int mbox, unsigned int port); +int t4_memory_write(struct adapter *adap, int mtype, u32 addr, u32 len, + __be32 *buf); int t4_seeprom_wp(struct adapter *adapter, bool enable); +int get_vpd_params(struct adapter *adapter, struct vpd_params *p); int t4_load_fw(struct adapter *adapter, const u8 *fw_data, unsigned int size); +unsigned int t4_flash_cfg_addr(struct adapter *adapter); int t4_check_fw_version(struct adapter *adapter); int t4_prep_adapter(struct adapter *adapter); int t4_port_init(struct adapter *adap, int mbox, int pf, int vf); @@ -680,6 +709,8 @@ int t4_edc_read(struct adapter *adap, int idx, u32 addr, __be32 *data, void t4_get_port_stats(struct adapter *adap, int idx, struct port_stats *p); void t4_read_mtu_tbl(struct adapter *adap, u16 *mtus, u8 *mtu_log); +void t4_tp_wr_bits_indirect(struct adapter *adap, unsigned int addr, + unsigned int mask, unsigned int val); void t4_tp_get_tcp_stats(struct adapter *adap, struct tp_tcp_stats *v4, struct tp_tcp_stats *v6); void t4_load_mtus(struct adapter *adap, const unsigned short *mtus, @@ -695,6 +726,16 @@ int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox, int t4_fw_bye(struct adapter *adap, unsigned int mbox); int t4_early_init(struct adapter *adap, unsigned int mbox); int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset); +int t4_fw_halt(struct adapter *adap, unsigned int mbox, int force); +int t4_fw_restart(struct adapter *adap, unsigned int mbox, int reset); +int t4_fw_upgrade(struct adapter *adap, unsigned int mbox, + const u8 *fw_data, unsigned int size, int force); +int t4_fw_config_file(struct adapter *adap, unsigned int mbox, + unsigned int mtype, unsigned int maddr, + u32 *finiver, u32 *finicsum, u32 *cfcsum); +int t4_fixup_host_params(struct adapter *adap, unsigned int page_size, + unsigned int cache_line_size); +int t4_fw_initialize(struct adapter *adap, unsigned int mbox); int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf, unsigned int vf, unsigned int nparams, const u32 *params, u32 *val); diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 9339854..6b9f6bb 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -78,28 +78,45 @@ */ #define MAX_SGE_TIMERVAL 200U -#ifdef CONFIG_PCI_IOV -/* - * Virtual Function provisioning constants. We need two extra Ingress Queues - * with Interrupt capability to serve as the VF's Firmware Event Queue and - * Forwarded Interrupt Queue (when using MSI mode) -- neither will have Free - * Lists associated with them). For each Ethernet/Control Egress Queue and - * for each Free List, we need an Egress Context. - */ enum { + /* + * Physical Function provisioning constants. + */ + PFRES_NVI = 4, /* # of Virtual Interfaces */ + PFRES_NETHCTRL = 128, /* # of EQs used for ETH or CTRL Qs */ + PFRES_NIQFLINT = 128, /* # of ingress Qs/w Free List(s)/intr + */ + PFRES_NEQ = 256, /* # of egress queues */ + PFRES_NIQ = 0, /* # of ingress queues */ + PFRES_TC = 0, /* PCI-E traffic class */ + PFRES_NEXACTF = 128, /* # of exact MPS filters */ + + PFRES_R_CAPS = FW_CMD_CAP_PF, + PFRES_WX_CAPS = FW_CMD_CAP_PF, + +#ifdef CONFIG_PCI_IOV + /* + * Virtual Function provisioning constants. We need two extra Ingress + * Queues with Interrupt capability to serve as the VF's Firmware + * Event Queue and Forwarded Interrupt Queue (when using MSI mode) -- + * neither will have Free Lists associated with them). For each + * Ethernet/Control Egress Queue and for each Free List, we need an + * Egress Context. + */ VFRES_NPORTS = 1, /* # of "ports" per VF */ VFRES_NQSETS = 2, /* # of "Queue Sets" per VF */ VFRES_NVI = VFRES_NPORTS, /* # of Virtual Interfaces */ VFRES_NETHCTRL = VFRES_NQSETS, /* # of EQs used for ETH or CTRL Qs */ VFRES_NIQFLINT = VFRES_NQSETS+2,/* # of ingress Qs/w Free List(s)/intr */ - VFRES_NIQ = 0, /* # of non-fl/int ingress queues */ VFRES_NEQ = VFRES_NQSETS*2, /* # of egress queues */ + VFRES_NIQ = 0, /* # of non-fl/int ingress queues */ VFRES_TC = 0, /* PCI-E traffic class */ VFRES_NEXACTF = 16, /* # of exact MPS filters */ VFRES_R_CAPS = FW_CMD_CAP_DMAQ|FW_CMD_CAP_VF|FW_CMD_CAP_PORT, VFRES_WX_CAPS = FW_CMD_CAP_DMAQ|FW_CMD_CAP_VF, +#endif }; /* @@ -146,7 +163,6 @@ static unsigned int pfvfres_pmask(struct adapter *adapter, } /*NOTREACHED*/ } -#endif enum { MAX_TXQ_ENTRIES = 16384, @@ -193,6 +209,7 @@ static DEFINE_PCI_DEVICE_TABLE(cxgb4_pci_tbl) = { }; #define FW_FNAME "cxgb4/t4fw.bin" +#define FW_CFNAME "cxgb4/t4-config.txt" MODULE_DESCRIPTION(DRV_DESC); MODULE_AUTHOR("Chelsio Communications"); @@ -201,6 +218,28 @@ MODULE_VERSION(DRV_VERSION); MODULE_DEVICE_TABLE(pci, cxgb4_pci_tbl); MODULE_FIRMWARE(FW_FNAME); +/* + * Normally we're willing to become the firmware's Master PF but will be happy + * if another PF has already become the Master and initialized the adapter. + * Setting "force_init" will cause this driver to forcibly establish itself as + * the Master PF and initialize the adapter. + */ +static uint force_init; + +module_param(force_init, uint, 0644); +MODULE_PARM_DESC(force_init, "Forcibly become Master PF and initialize adapter"); + +/* + * Normally if the firmware we connect to has Configuration File support, we + * use that and only fall back to the old Driver-based initialization if the + * Configuration File fails for some reason. If force_old_init is set, then + * we'll always use the old Driver-based initialization sequence. + */ +static uint force_old_init; + +module_param(force_old_init, uint, 0644); +MODULE_PARM_DESC(force_old_init, "Force old initialization sequence"); + static int dflt_msg_enable = DFLT_MSG_ENABLE; module_param(dflt_msg_enable, int, 0644); @@ -236,6 +275,20 @@ module_param_array(intr_cnt, uint, NULL, 0644); MODULE_PARM_DESC(intr_cnt, "thresholds 1..3 for queue interrupt packet counters"); +/* + * Normally we tell the chip to deliver Ingress Packets into our DMA buffers + * offset by 2 bytes in order to have the IP headers line up on 4-byte + * boundaries. This is a requirement for many architectures which will throw + * a machine check fault if an attempt is made to access one of the 4-byte IP + * header fields on a non-4-byte boundary. And it's a major performance issue + * even on some architectures which allow it like some implementations of the + * x86 ISA. However, some architectures don't mind this and for some very + * edge-case performance sensitive applications (like forwarding large volumes + * of small packets), setting this DMA offset to 0 will decrease the number of + * PCI-E Bus transfers enough to measurably affect performance. + */ +static int rx_dma_offset = 2; + static bool vf_acls; #ifdef CONFIG_PCI_IOV @@ -248,6 +301,30 @@ module_param_array(num_vf, uint, NULL, 0644); MODULE_PARM_DESC(num_vf, "number of VFs for each of PFs 0-3"); #endif +/* + * The filter TCAM has a fixed portion and a variable portion. The fixed + * portion can match on source/destination IP IPv4/IPv6 addresses and TCP/UDP + * ports. The variable portion is 36 bits which can include things like Exact + * Match MAC Index (9 bits), Ether Type (16 bits), IP Protocol (8 bits), + * [Inner] VLAN Tag (17 bits), etc. which, if all were somehow selected, would + * far exceed the 36-bit budget for this "compressed" header portion of the + * filter. Thus, we have a scarce resource which must be carefully managed. + * + * By default we set this up to mostly match the set of filter matching + * capabilities of T3 but with accommodations for some of T4's more + * interesting features: + * + * { IP Fragment (1), MPS Match Type (3), IP Protocol (8), + * [Inner] VLAN (17), Port (3), FCoE (1) } + */ +enum { + TP_VLAN_PRI_MAP_DEFAULT = HW_TPL_FR_MT_PR_IV_P_FC, + TP_VLAN_PRI_MAP_FIRST = FCOE_SHIFT, + TP_VLAN_PRI_MAP_LAST = FRAGMENTATION_SHIFT, +}; + +static unsigned int tp_vlan_pri_map = TP_VLAN_PRI_MAP_DEFAULT; + static struct dentry *cxgb4_debugfs_root; static LIST_HEAD(adapter_list); @@ -852,11 +929,25 @@ static int upgrade_fw(struct adapter *adap) */ if (FW_HDR_FW_VER_MAJOR_GET(adap->params.fw_vers) != FW_VERSION_MAJOR || vers > adap->params.fw_vers) { - ret = -t4_load_fw(adap, fw->data, fw->size); + dev_info(dev, "upgrading firmware ...\n"); + ret = t4_fw_upgrade(adap, adap->mbox, fw->data, fw->size, + /*force=*/false); if (!ret) - dev_info(dev, "firmware upgraded to version %pI4 from " - FW_FNAME "\n", &hdr->fw_ver); + dev_info(dev, "firmware successfully upgraded to " + FW_FNAME " (%d.%d.%d.%d)\n", + FW_HDR_FW_VER_MAJOR_GET(vers), + FW_HDR_FW_VER_MINOR_GET(vers), + FW_HDR_FW_VER_MICRO_GET(vers), + FW_HDR_FW_VER_BUILD_GET(vers)); + else + dev_err(dev, "firmware upgrade failed! err=%d\n", -ret); + } else { + /* + * Tell our caller that we didn't upgrade the firmware. + */ + ret = -EINVAL; } + out: release_firmware(fw); return ret; } @@ -2470,8 +2561,8 @@ int cxgb4_sync_txq_pidx(struct net_device *dev, u16 qid, u16 pidx, else delta = size - hw_pidx + pidx; wmb(); - t4_write_reg(adap, MYPF_REG(A_SGE_PF_KDOORBELL), - V_QID(qid) | V_PIDX(delta)); + t4_write_reg(adap, MYPF_REG(SGE_PF_KDOORBELL), + QID(qid) | PIDX(delta)); } out: return ret; @@ -2579,8 +2670,8 @@ static void sync_txq_pidx(struct adapter *adap, struct sge_txq *q) else delta = q->size - hw_pidx + q->db_pidx; wmb(); - t4_write_reg(adap, MYPF_REG(A_SGE_PF_KDOORBELL), - V_QID(q->cntxt_id) | V_PIDX(delta)); + t4_write_reg(adap, MYPF_REG(SGE_PF_KDOORBELL), + QID(q->cntxt_id) | PIDX(delta)); } out: q->db_disabled = 0; @@ -2617,9 +2708,9 @@ static void process_db_full(struct work_struct *work) notify_rdma_uld(adap, CXGB4_CONTROL_DB_FULL); drain_db_fifo(adap, dbfifo_drain_delay); - t4_set_reg_field(adap, A_SGE_INT_ENABLE3, - F_DBFIFO_HP_INT | F_DBFIFO_LP_INT, - F_DBFIFO_HP_INT | F_DBFIFO_LP_INT); + t4_set_reg_field(adap, SGE_INT_ENABLE3, + DBFIFO_HP_INT | DBFIFO_LP_INT, + DBFIFO_HP_INT | DBFIFO_LP_INT); notify_rdma_uld(adap, CXGB4_CONTROL_DB_EMPTY); } @@ -2639,8 +2730,8 @@ static void process_db_drop(struct work_struct *work) void t4_db_full(struct adapter *adap) { - t4_set_reg_field(adap, A_SGE_INT_ENABLE3, - F_DBFIFO_HP_INT | F_DBFIFO_LP_INT, 0); + t4_set_reg_field(adap, SGE_INT_ENABLE3, + DBFIFO_HP_INT | DBFIFO_LP_INT, 0); queue_work(workq, &adap->db_full_task); } @@ -3076,6 +3167,10 @@ static void setup_memwin(struct adapter *adap) t4_write_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 2), (bar0 + MEMWIN2_BASE) | BIR(0) | WINDOW(ilog2(MEMWIN2_APERTURE) - 10)); +} + +static void setup_memwin_rdma(struct adapter *adap) +{ if (adap->vres.ocq.size) { unsigned int start, sz_kb; @@ -3155,6 +3250,488 @@ static int adap_init1(struct adapter *adap, struct fw_caps_config_cmd *c) /* * Phase 0 of initialization: contact FW, obtain config, perform basic init. + * + * If the firmware we're dealing with has Configuration File support, then + * we use that to perform all configuration + */ + +/* + * Tweak configuration based on module parameters, etc. Most of these have + * defaults assigned to them by Firmware Configuration Files (if we're using + * them) but need to be explicitly set if we're using hard-coded + * initialization. But even in the case of using Firmware Configuration + * Files, we'd like to expose the ability to change these via module + * parameters so these are essentially common tweaks/settings for + * Configuration Files and hard-coded initialization ... + */ +static int adap_init0_tweaks(struct adapter *adapter) +{ + /* + * Fix up various Host-Dependent Parameters like Page Size, Cache + * Line Size, etc. The firmware default is for a 4KB Page Size and + * 64B Cache Line Size ... + */ + t4_fixup_host_params(adapter, PAGE_SIZE, L1_CACHE_BYTES); + + /* + * Process module parameters which affect early initialization. + */ + if (rx_dma_offset != 2 && rx_dma_offset != 0) { + dev_err(&adapter->pdev->dev, + "Ignoring illegal rx_dma_offset=%d, using 2\n", + rx_dma_offset); + rx_dma_offset = 2; + } + t4_set_reg_field(adapter, SGE_CONTROL, + PKTSHIFT_MASK, + PKTSHIFT(rx_dma_offset)); + + /* + * Don't include the "IP Pseudo Header" in CPL_RX_PKT checksums: Linux + * adds the pseudo header itself. + */ + t4_tp_wr_bits_indirect(adapter, TP_INGRESS_CONFIG, + CSUM_HAS_PSEUDO_HDR, 0); + + return 0; +} + +/* + * Attempt to initialize the adapter via a Firmware Configuration File. + */ +static int adap_init0_config(struct adapter *adapter, int reset) +{ + struct fw_caps_config_cmd caps_cmd; + const struct firmware *cf; + unsigned long mtype = 0, maddr = 0; + u32 finiver, finicsum, cfcsum; + int ret, using_flash; + + /* + * Reset device if necessary. + */ + if (reset) { + ret = t4_fw_reset(adapter, adapter->mbox, + PIORSTMODE | PIORST); + if (ret < 0) + goto bye; + } + + /* + * If we have a T4 configuration file under /lib/firmware/cxgb4/, + * then use that. Otherwise, use the configuration file stored + * in the adapter flash ... + */ + ret = request_firmware(&cf, FW_CFNAME, adapter->pdev_dev); + if (ret < 0) { + using_flash = 1; + mtype = FW_MEMTYPE_CF_FLASH; + maddr = t4_flash_cfg_addr(adapter); + } else { + u32 params[7], val[7]; + + using_flash = 0; + if (cf->size >= FLASH_CFG_MAX_SIZE) + ret = -ENOMEM; + else { + params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CF)); + ret = t4_query_params(adapter, adapter->mbox, + adapter->fn, 0, 1, params, val); + if (ret == 0) { + /* + * For t4_memory_write() below addresses and + * sizes have to be in terms of multiples of 4 + * bytes. So, if the Configuration File isn't + * a multiple of 4 bytes in length we'll have + * to write that out separately since we can't + * guarantee that the bytes following the + * residual byte in the buffer returned by + * request_firmware() are zeroed out ... + */ + size_t resid = cf->size & 0x3; + size_t size = cf->size & ~0x3; + __be32 *data = (__be32 *)cf->data; + + mtype = FW_PARAMS_PARAM_Y_GET(val[0]); + maddr = FW_PARAMS_PARAM_Z_GET(val[0]) << 16; + + ret = t4_memory_write(adapter, mtype, maddr, + size, data); + if (ret == 0 && resid != 0) { + union { + __be32 word; + char buf[4]; + } last; + int i; + + last.word = data[size >> 2]; + for (i = resid; i < 4; i++) + last.buf[i] = 0; + ret = t4_memory_write(adapter, mtype, + maddr + size, + 4, &last.word); + } + } + } + + release_firmware(cf); + if (ret) + goto bye; + } + + /* + * Issue a Capability Configuration command to the firmware to get it + * to parse the Configuration File. We don't use t4_fw_config_file() + * because we want the ability to modify various features after we've + * processed the configuration file ... + */ + memset(&caps_cmd, 0, sizeof(caps_cmd)); + caps_cmd.op_to_write = + htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | + FW_CMD_READ); + caps_cmd.retval_len16 = + htonl(FW_CAPS_CONFIG_CMD_CFVALID | + FW_CAPS_CONFIG_CMD_MEMTYPE_CF(mtype) | + FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(maddr >> 16) | + FW_LEN16(caps_cmd)); + ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd), + &caps_cmd); + if (ret < 0) + goto bye; + + finiver = ntohl(caps_cmd.finiver); + finicsum = ntohl(caps_cmd.finicsum); + cfcsum = ntohl(caps_cmd.cfcsum); + if (finicsum != cfcsum) + dev_warn(adapter->pdev_dev, "Configuration File checksum "\ + "mismatch: [fini] csum=%#x, computed csum=%#x\n", + finicsum, cfcsum); + + /* + * If we're a pure NIC driver then disable all offloading facilities. + * This will allow the firmware to optimize aspects of the hardware + * configuration which will result in improved performance. + */ + caps_cmd.ofldcaps = 0; + caps_cmd.iscsicaps = 0; + caps_cmd.rdmacaps = 0; + caps_cmd.fcoecaps = 0; + + /* + * And now tell the firmware to use the configuration we just loaded. + */ + caps_cmd.op_to_write = + htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | + FW_CMD_WRITE); + caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd)); + ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd), + NULL); + if (ret < 0) + goto bye; + + /* + * Tweak configuration based on system architecture, module + * parameters, etc. + */ + ret = adap_init0_tweaks(adapter); + if (ret < 0) + goto bye; + + /* + * And finally tell the firmware to initialize itself using the + * parameters from the Configuration File. + */ + ret = t4_fw_initialize(adapter, adapter->mbox); + if (ret < 0) + goto bye; + + /* + * Return successfully and note that we're operating with parameters + * not supplied by the driver, rather than from hard-wired + * initialization constants burried in the driver. + */ + adapter->flags |= USING_SOFT_PARAMS; + dev_info(adapter->pdev_dev, "Successfully configured using Firmware "\ + "Configuration File %s, version %#x, computed checksum %#x\n", + (using_flash + ? "in device FLASH" + : "/lib/firmware/" FW_CFNAME), + finiver, cfcsum); + return 0; + + /* + * Something bad happened. Return the error ... (If the "error" + * is that there's no Configuration File on the adapter we don't + * want to issue a warning since this is fairly common.) + */ +bye: + if (ret != -ENOENT) + dev_warn(adapter->pdev_dev, "Configuration file error %d\n", + -ret); + return ret; +} + +/* + * Attempt to initialize the adapter via hard-coded, driver supplied + * parameters ... + */ +static int adap_init0_no_config(struct adapter *adapter, int reset) +{ + struct sge *s = &adapter->sge; + struct fw_caps_config_cmd caps_cmd; + u32 v; + int i, ret; + + /* + * Reset device if necessary + */ + if (reset) { + ret = t4_fw_reset(adapter, adapter->mbox, + PIORSTMODE | PIORST); + if (ret < 0) + goto bye; + } + + /* + * Get device capabilities and select which we'll be using. + */ + memset(&caps_cmd, 0, sizeof(caps_cmd)); + caps_cmd.op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | FW_CMD_READ); + caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd)); + ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd), + &caps_cmd); + if (ret < 0) + goto bye; + +#ifndef CONFIG_CHELSIO_T4_OFFLOAD + /* + * If we're a pure NIC driver then disable all offloading facilities. + * This will allow the firmware to optimize aspects of the hardware + * configuration which will result in improved performance. + */ + caps_cmd.ofldcaps = 0; + caps_cmd.iscsicaps = 0; + caps_cmd.rdmacaps = 0; + caps_cmd.fcoecaps = 0; +#endif + + if (caps_cmd.niccaps & htons(FW_CAPS_CONFIG_NIC_VM)) { + if (!vf_acls) + caps_cmd.niccaps ^= htons(FW_CAPS_CONFIG_NIC_VM); + else + caps_cmd.niccaps = htons(FW_CAPS_CONFIG_NIC_VM); + } else if (vf_acls) { + dev_err(adapter->pdev_dev, "virtualization ACLs not supported"); + goto bye; + } + caps_cmd.op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | FW_CMD_WRITE); + ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd), + NULL); + if (ret < 0) + goto bye; + + /* + * Tweak configuration based on system architecture, module + * parameters, etc. + */ + ret = adap_init0_tweaks(adapter); + if (ret < 0) + goto bye; + + /* + * Select RSS Global Mode we want to use. We use "Basic Virtual" + * mode which maps each Virtual Interface to its own section of + * the RSS Table and we turn on all map and hash enables ... + */ + adapter->flags |= RSS_TNLALLLOOKUP; + ret = t4_config_glbl_rss(adapter, adapter->mbox, + FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL, + FW_RSS_GLB_CONFIG_CMD_TNLMAPEN | + FW_RSS_GLB_CONFIG_CMD_HASHTOEPLITZ | + ((adapter->flags & RSS_TNLALLLOOKUP) ? + FW_RSS_GLB_CONFIG_CMD_TNLALLLKP : 0)); + if (ret < 0) + goto bye; + + /* + * Set up our own fundamental resource provisioning ... + */ + ret = t4_cfg_pfvf(adapter, adapter->mbox, adapter->fn, 0, + PFRES_NEQ, PFRES_NETHCTRL, + PFRES_NIQFLINT, PFRES_NIQ, + PFRES_TC, PFRES_NVI, + FW_PFVF_CMD_CMASK_MASK, + pfvfres_pmask(adapter, adapter->fn, 0), + PFRES_NEXACTF, + PFRES_R_CAPS, PFRES_WX_CAPS); + if (ret < 0) + goto bye; + + /* + * Perform low level SGE initialization. We need to do this before we + * send the firmware the INITIALIZE command because that will cause + * any other PF Drivers which are waiting for the Master + * Initialization to proceed forward. + */ + for (i = 0; i < SGE_NTIMERS - 1; i++) + s->timer_val[i] = min(intr_holdoff[i], MAX_SGE_TIMERVAL); + s->timer_val[SGE_NTIMERS - 1] = MAX_SGE_TIMERVAL; + s->counter_val[0] = 1; + for (i = 1; i < SGE_NCOUNTERS; i++) + s->counter_val[i] = min(intr_cnt[i - 1], + THRESHOLD_0_GET(THRESHOLD_0_MASK)); + t4_sge_init(adapter); + +#ifdef CONFIG_PCI_IOV + /* + * Provision resource limits for Virtual Functions. We currently + * grant them all the same static resource limits except for the Port + * Access Rights Mask which we're assigning based on the PF. All of + * the static provisioning stuff for both the PF and VF really needs + * to be managed in a persistent manner for each device which the + * firmware controls. + */ + { + int pf, vf; + + for (pf = 0; pf < ARRAY_SIZE(num_vf); pf++) { + if (num_vf[pf] <= 0) + continue; + + /* VF numbering starts at 1! */ + for (vf = 1; vf <= num_vf[pf]; vf++) { + ret = t4_cfg_pfvf(adapter, adapter->mbox, + pf, vf, + VFRES_NEQ, VFRES_NETHCTRL, + VFRES_NIQFLINT, VFRES_NIQ, + VFRES_TC, VFRES_NVI, + FW_PFVF_CMD_CMASK_GET( + FW_PFVF_CMD_CMASK_MASK), + pfvfres_pmask( + adapter, pf, vf), + VFRES_NEXACTF, + VFRES_R_CAPS, VFRES_WX_CAPS); + if (ret < 0) + dev_warn(adapter->pdev_dev, + "failed to "\ + "provision pf/vf=%d/%d; " + "err=%d\n", pf, vf, ret); + } + } + } +#endif + + /* + * Set up the default filter mode. Later we'll want to implement this + * via a firmware command, etc. ... This needs to be done before the + * firmare initialization command ... If the selected set of fields + * isn't equal to the default value, we'll need to make sure that the + * field selections will fit in the 36-bit budget. + */ + if (tp_vlan_pri_map != TP_VLAN_PRI_MAP_DEFAULT) { + int i, bits = 0; + + for (i = TP_VLAN_PRI_MAP_FIRST; i <= TP_VLAN_PRI_MAP_LAST; i++) + switch (tp_vlan_pri_map & (1 << i)) { + case 0: + /* compressed filter field not enabled */ + break; + case FCOE_MASK: + bits += 1; + break; + case PORT_MASK: + bits += 3; + break; + case VNIC_ID_MASK: + bits += 17; + break; + case VLAN_MASK: + bits += 17; + break; + case TOS_MASK: + bits += 8; + break; + case PROTOCOL_MASK: + bits += 8; + break; + case ETHERTYPE_MASK: + bits += 16; + break; + case MACMATCH_MASK: + bits += 9; + break; + case MPSHITTYPE_MASK: + bits += 3; + break; + case FRAGMENTATION_MASK: + bits += 1; + break; + } + + if (bits > 36) { + dev_err(adapter->pdev_dev, + "tp_vlan_pri_map=%#x needs %d bits > 36;"\ + " using %#x\n", tp_vlan_pri_map, bits, + TP_VLAN_PRI_MAP_DEFAULT); + tp_vlan_pri_map = TP_VLAN_PRI_MAP_DEFAULT; + } + } + v = tp_vlan_pri_map; + t4_write_indirect(adapter, TP_PIO_ADDR, TP_PIO_DATA, + &v, 1, TP_VLAN_PRI_MAP); + + /* + * We need Five Tuple Lookup mode to be set in TP_GLOBAL_CONFIG order + * to support any of the compressed filter fields above. Newer + * versions of the firmware do this automatically but it doesn't hurt + * to set it here. Meanwhile, we do _not_ need to set Lookup Every + * Packet in TP_INGRESS_CONFIG to support matching non-TCP packets + * since the firmware automatically turns this on and off when we have + * a non-zero number of filters active (since it does have a + * performance impact). + */ + if (tp_vlan_pri_map) + t4_set_reg_field(adapter, TP_GLOBAL_CONFIG, + FIVETUPLELOOKUP_MASK, + FIVETUPLELOOKUP_MASK); + + /* + * Tweak some settings. + */ + t4_write_reg(adapter, TP_SHIFT_CNT, SYNSHIFTMAX(6) | + RXTSHIFTMAXR1(4) | RXTSHIFTMAXR2(15) | + PERSHIFTBACKOFFMAX(8) | PERSHIFTMAX(8) | + KEEPALIVEMAXR1(4) | KEEPALIVEMAXR2(9)); + + /* + * Get basic stuff going by issuing the Firmware Initialize command. + * Note that this _must_ be after all PFVF commands ... + */ + ret = t4_fw_initialize(adapter, adapter->mbox); + if (ret < 0) + goto bye; + + /* + * Return successfully! + */ + dev_info(adapter->pdev_dev, "Successfully configured using built-in "\ + "driver parameters\n"); + return 0; + + /* + * Something bad happened. Return the error ... + */ +bye: + return ret; +} + +/* + * Phase 0 of initialization: contact FW, obtain config, perform basic init. */ static int adap_init0(struct adapter *adap) { @@ -3162,72 +3739,216 @@ static int adap_init0(struct adapter *adap) u32 v, port_vec; enum dev_state state; u32 params[7], val[7]; - struct fw_caps_config_cmd c; - - ret = t4_check_fw_version(adap); - if (ret == -EINVAL || ret > 0) { - if (upgrade_fw(adap) >= 0) /* recache FW version */ - ret = t4_check_fw_version(adap); - } - if (ret < 0) - return ret; + int reset = 1, j; - /* contact FW, request master */ - ret = t4_fw_hello(adap, adap->fn, adap->fn, MASTER_MUST, &state); + /* + * Contact FW, advertising Master capability (and potentially forcing + * ourselves as the Master PF if our module parameter force_init is + * set). + */ + ret = t4_fw_hello(adap, adap->mbox, adap->fn, + force_init ? MASTER_MUST : MASTER_MAY, + &state); if (ret < 0) { dev_err(adap->pdev_dev, "could not connect to FW, error %d\n", ret); return ret; } + if (ret == adap->mbox) + adap->flags |= MASTER_PF; + if (force_init && state == DEV_STATE_INIT) + state = DEV_STATE_UNINIT; - /* reset device */ - ret = t4_fw_reset(adap, adap->fn, PIORSTMODE | PIORST); - if (ret < 0) - goto bye; - - for (v = 0; v < SGE_NTIMERS - 1; v++) - adap->sge.timer_val[v] = min(intr_holdoff[v], MAX_SGE_TIMERVAL); - adap->sge.timer_val[SGE_NTIMERS - 1] = MAX_SGE_TIMERVAL; - adap->sge.counter_val[0] = 1; - for (v = 1; v < SGE_NCOUNTERS; v++) - adap->sge.counter_val[v] = min(intr_cnt[v - 1], - THRESHOLD_3_MASK); -#define FW_PARAM_DEV(param) \ - (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | \ - FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_##param)) + /* + * If we're the Master PF Driver and the device is uninitialized, + * then let's consider upgrading the firmware ... (We always want + * to check the firmware version number in order to A. get it for + * later reporting and B. to warn if the currently loaded firmware + * is excessively mismatched relative to the driver.) + */ + ret = t4_check_fw_version(adap); + if ((adap->flags & MASTER_PF) && state != DEV_STATE_INIT) { + if (ret == -EINVAL || ret > 0) { + if (upgrade_fw(adap) >= 0) { + /* + * Note that the chip was reset as part of the + * firmware upgrade so we don't reset it again + * below and grab the new firmware version. + */ + reset = 0; + ret = t4_check_fw_version(adap); + } + } + if (ret < 0) + return ret; + } - params[0] = FW_PARAM_DEV(CCLK); - ret = t4_query_params(adap, adap->fn, adap->fn, 0, 1, params, val); + /* + * Grab VPD parameters. This should be done after we establish a + * connection to the firmware since some of the VPD parameters + * (notably the Core Clock frequency) are retrieved via requests to + * the firmware. On the other hand, we need these fairly early on + * so we do this right after getting ahold of the firmware. + */ + ret = get_vpd_params(adap, &adap->params.vpd); if (ret < 0) goto bye; - adap->params.vpd.cclk = val[0]; - ret = adap_init1(adap, &c); + /* + * Find out what ports are available to us. Note that we need to do + * this before calling adap_init0_no_config() since it needs nports + * and portvec ... + */ + v = + FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_PORTVEC); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 1, &v, &port_vec); if (ret < 0) goto bye; + adap->params.nports = hweight32(port_vec); + adap->params.portvec = port_vec; + + /* + * If the firmware is initialized already (and we're not forcing a + * master initialization), note that we're living with existing + * adapter parameters. Otherwise, it's time to try initializing the + * adapter ... + */ + if (state == DEV_STATE_INIT) { + dev_info(adap->pdev_dev, "Coming up as %s: "\ + "Adapter already initialized\n", + adap->flags & MASTER_PF ? "MASTER" : "SLAVE"); + adap->flags |= USING_SOFT_PARAMS; + } else { + dev_info(adap->pdev_dev, "Coming up as MASTER: "\ + "Initializing adapter\n"); + + /* + * If the firmware doesn't support Configuration + * Files warn user and exit, + */ + if (ret < 0) + dev_warn(adap->pdev_dev, "Firmware doesn't support " + "configuration file.\n"); + if (force_old_init) + ret = adap_init0_no_config(adap, reset); + else { + /* + * Find out whether we're dealing with a version of + * the firmware which has configuration file support. + */ + params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CF)); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 1, + params, val); + + /* + * If the firmware doesn't support Configuration + * Files, use the old Driver-based, hard-wired + * initialization. Otherwise, try using the + * Configuration File support and fall back to the + * Driver-based initialization if there's no + * Configuration File found. + */ + if (ret < 0) + ret = adap_init0_no_config(adap, reset); + else { + /* + * The firmware provides us with a memory + * buffer where we can load a Configuration + * File from the host if we want to override + * the Configuration File in flash. + */ + + ret = adap_init0_config(adap, reset); + if (ret == -ENOENT) { + dev_info(adap->pdev_dev, + "No Configuration File present " + "on adapter. Using hard-wired " + "configuration parameters.\n"); + ret = adap_init0_no_config(adap, reset); + } + } + } + if (ret < 0) { + dev_err(adap->pdev_dev, + "could not initialize adapter, error %d\n", + -ret); + goto bye; + } + } + + /* + * If we're living with non-hard-coded parameters (either from a + * Firmware Configuration File or values programmed by a different PF + * Driver), give the SGE code a chance to pull in anything that it + * needs ... Note that this must be called after we retrieve our VPD + * parameters in order to know how to convert core ticks to seconds. + */ + if (adap->flags & USING_SOFT_PARAMS) { + ret = t4_sge_init(adap); + if (ret < 0) + goto bye; + } + + /* + * Grab some of our basic fundamental operating parameters. + */ +#define FW_PARAM_DEV(param) \ + (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | \ + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_##param)) + #define FW_PARAM_PFVF(param) \ - (FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) | \ - FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_PFVF_##param) | \ - FW_PARAMS_PARAM_Y(adap->fn)) + FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) | \ + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_PFVF_##param)| \ + FW_PARAMS_PARAM_Y(0) | \ + FW_PARAMS_PARAM_Z(0) - params[0] = FW_PARAM_DEV(PORTVEC); + params[0] = FW_PARAM_PFVF(EQ_START); params[1] = FW_PARAM_PFVF(L2T_START); params[2] = FW_PARAM_PFVF(L2T_END); params[3] = FW_PARAM_PFVF(FILTER_START); params[4] = FW_PARAM_PFVF(FILTER_END); params[5] = FW_PARAM_PFVF(IQFLINT_START); - params[6] = FW_PARAM_PFVF(EQ_START); - ret = t4_query_params(adap, adap->fn, adap->fn, 0, 7, params, val); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 6, params, val); if (ret < 0) goto bye; - port_vec = val[0]; + adap->sge.egr_start = val[0]; + adap->l2t_start = val[1]; + adap->l2t_end = val[2]; adap->tids.ftid_base = val[3]; adap->tids.nftids = val[4] - val[3] + 1; adap->sge.ingr_start = val[5]; - adap->sge.egr_start = val[6]; - if (c.ofldcaps) { + /* query params related to active filter region */ + params[0] = FW_PARAM_PFVF(ACTIVE_FILTER_START); + params[1] = FW_PARAM_PFVF(ACTIVE_FILTER_END); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2, params, val); + /* If Active filter size is set we enable establishing + * offload connection through firmware work request + */ + if ((val[0] != val[1]) && (ret >= 0)) { + adap->flags |= FW_OFLD_CONN; + adap->tids.aftid_base = val[0]; + adap->tids.aftid_end = val[1]; + } + +#ifdef CONFIG_CHELSIO_T4_OFFLOAD + /* + * Get device capabilities so we can determine what resources we need + * to manage. + */ + memset(&caps_cmd, 0, sizeof(caps_cmd)); + caps_cmd.op_to_write = htonl(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | FW_CMD_READ); + caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd)); + ret = t4_wr_mbox(adap, adap->mbox, &caps_cmd, sizeof(caps_cmd), + &caps_cmd); + if (ret < 0) + goto bye; + + if (caps_cmd.ofldcaps) { /* query offload-related parameters */ params[0] = FW_PARAM_DEV(NTID); params[1] = FW_PARAM_PFVF(SERVER_START); @@ -3235,28 +3956,55 @@ static int adap_init0(struct adapter *adap) params[3] = FW_PARAM_PFVF(TDDP_START); params[4] = FW_PARAM_PFVF(TDDP_END); params[5] = FW_PARAM_DEV(FLOWC_BUFFIFO_SZ); - ret = t4_query_params(adap, adap->fn, adap->fn, 0, 6, params, - val); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 6, + params, val); if (ret < 0) goto bye; adap->tids.ntids = val[0]; adap->tids.natids = min(adap->tids.ntids / 2, MAX_ATIDS); adap->tids.stid_base = val[1]; adap->tids.nstids = val[2] - val[1] + 1; + /* + * Setup server filter region. Divide the availble filter + * region into two parts. Regular filters get 1/3rd and server + * filters get 2/3rd part. This is only enabled if workarond + * path is enabled. + * 1. For regular filters. + * 2. Server filter: This are special filters which are used + * to redirect SYN packets to offload queue. + */ + if (adap->flags & FW_OFLD_CONN && !is_bypass(adap)) { + adap->tids.sftid_base = adap->tids.ftid_base + + DIV_ROUND_UP(adap->tids.nftids, 3); + adap->tids.nsftids = adap->tids.nftids - + DIV_ROUND_UP(adap->tids.nftids, 3); + adap->tids.nftids = adap->tids.sftid_base - + adap->tids.ftid_base; + } adap->vres.ddp.start = val[3]; adap->vres.ddp.size = val[4] - val[3] + 1; adap->params.ofldq_wr_cred = val[5]; + + params[0] = FW_PARAM_PFVF(ETHOFLD_START); + params[1] = FW_PARAM_PFVF(ETHOFLD_END); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2, + params, val); + if ((val[0] != val[1]) && (ret >= 0)) { + adap->tids.uotid_base = val[0]; + adap->tids.nuotids = val[1] - val[0] + 1; + } + adap->params.offload = 1; } - if (c.rdmacaps) { + if (caps_cmd.rdmacaps) { params[0] = FW_PARAM_PFVF(STAG_START); params[1] = FW_PARAM_PFVF(STAG_END); params[2] = FW_PARAM_PFVF(RQ_START); params[3] = FW_PARAM_PFVF(RQ_END); params[4] = FW_PARAM_PFVF(PBL_START); params[5] = FW_PARAM_PFVF(PBL_END); - ret = t4_query_params(adap, adap->fn, adap->fn, 0, 6, params, - val); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 6, + params, val); if (ret < 0) goto bye; adap->vres.stag.start = val[0]; @@ -3272,8 +4020,7 @@ static int adap_init0(struct adapter *adap) params[3] = FW_PARAM_PFVF(CQ_END); params[4] = FW_PARAM_PFVF(OCQ_START); params[5] = FW_PARAM_PFVF(OCQ_END); - ret = t4_query_params(adap, adap->fn, adap->fn, 0, 6, params, - val); + ret = t4_query_params(adap, 0, 0, 0, 6, params, val); if (ret < 0) goto bye; adap->vres.qp.start = val[0]; @@ -3283,11 +4030,11 @@ static int adap_init0(struct adapter *adap) adap->vres.ocq.start = val[4]; adap->vres.ocq.size = val[5] - val[4] + 1; } - if (c.iscsicaps) { + if (caps_cmd.iscsicaps) { params[0] = FW_PARAM_PFVF(ISCSI_START); params[1] = FW_PARAM_PFVF(ISCSI_END); - ret = t4_query_params(adap, adap->fn, adap->fn, 0, 2, params, - val); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2, + params, val); if (ret < 0) goto bye; adap->vres.iscsi.start = val[0]; @@ -3295,63 +4042,33 @@ static int adap_init0(struct adapter *adap) } #undef FW_PARAM_PFVF #undef FW_PARAM_DEV +#endif /* CONFIG_CHELSIO_T4_OFFLOAD */ - adap->params.nports = hweight32(port_vec); - adap->params.portvec = port_vec; - adap->flags |= FW_OK; - - /* These are finalized by FW initialization, load their values now */ + /* + * These are finalized by FW initialization, load their values now. + */ v = t4_read_reg(adap, TP_TIMER_RESOLUTION); adap->params.tp.tre = TIMERRESOLUTION_GET(v); + adap->params.tp.dack_re = DELAYEDACKRESOLUTION_GET(v); t4_read_mtu_tbl(adap, adap->params.mtus, NULL); t4_load_mtus(adap, adap->params.mtus, adap->params.a_wnd, adap->params.b_wnd); -#ifdef CONFIG_PCI_IOV - /* - * Provision resource limits for Virtual Functions. We currently - * grant them all the same static resource limits except for the Port - * Access Rights Mask which we're assigning based on the PF. All of - * the static provisioning stuff for both the PF and VF really needs - * to be managed in a persistent manner for each device which the - * firmware controls. - */ - { - int pf, vf; - - for (pf = 0; pf < ARRAY_SIZE(num_vf); pf++) { - if (num_vf[pf] <= 0) - continue; + /* MODQ_REQ_MAP defaults to setting queues 0-3 to chan 0-3 */ + for (j = 0; j < NCHAN; j++) + adap->params.tp.tx_modq[j] = j; - /* VF numbering starts at 1! */ - for (vf = 1; vf <= num_vf[pf]; vf++) { - ret = t4_cfg_pfvf(adap, adap->fn, pf, vf, - VFRES_NEQ, VFRES_NETHCTRL, - VFRES_NIQFLINT, VFRES_NIQ, - VFRES_TC, VFRES_NVI, - FW_PFVF_CMD_CMASK_MASK, - pfvfres_pmask(adap, pf, vf), - VFRES_NEXACTF, - VFRES_R_CAPS, VFRES_WX_CAPS); - if (ret < 0) - dev_warn(adap->pdev_dev, "failed to " - "provision pf/vf=%d/%d; " - "err=%d\n", pf, vf, ret); - } - } - } -#endif - - setup_memwin(adap); + adap->flags |= FW_OK; return 0; /* - * If a command timed out or failed with EIO FW does not operate within - * its spec or something catastrophic happened to HW/FW, stop issuing - * commands. + * Something bad happened. If a command timed out or failed with EIO + * FW does not operate within its spec or something catastrophic + * happened to HW/FW, stop issuing commands. */ -bye: if (ret != -ETIMEDOUT && ret != -EIO) - t4_fw_bye(adap, adap->fn); +bye: + if (ret != -ETIMEDOUT && ret != -EIO) + t4_fw_bye(adap, adap->mbox); return ret; } @@ -3806,7 +4523,9 @@ static int __devinit init_one(struct pci_dev *pdev, err = t4_prep_adapter(adapter); if (err) goto out_unmap_bar; + setup_memwin(adapter); err = adap_init0(adapter); + setup_memwin_rdma(adapter); if (err) goto out_unmap_bar; @@ -3948,8 +4667,11 @@ static void __devexit remove_one(struct pci_dev *pdev) { struct adapter *adapter = pci_get_drvdata(pdev); +#ifdef CONFIG_PCI_IOV pci_disable_sriov(pdev); +#endif + if (adapter) { int i; diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h index d79980c..1b899fe 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h @@ -100,6 +100,8 @@ struct tid_info { unsigned int nftids; unsigned int ftid_base; + unsigned int aftid_base; + unsigned int aftid_end; spinlock_t atid_lock ____cacheline_aligned_in_smp; union aopen_entry *afree; diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c index d49933e..3ecc087 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c @@ -68,9 +68,6 @@ */ #define RX_PKT_SKB_LEN 512 -/* Ethernet header padding prepended to RX_PKTs */ -#define RX_PKT_PAD 2 - /* * Max number of Tx descriptors we clean up at a time. Should be modest as * freeing skbs isn't cheap and it happens while holding locks. We just need @@ -137,13 +134,6 @@ */ #define MAX_CTRL_WR_LEN SGE_MAX_WR_LEN -enum { - /* packet alignment in FL buffers */ - FL_ALIGN = L1_CACHE_BYTES < 32 ? 32 : L1_CACHE_BYTES, - /* egress status entry size */ - STAT_LEN = L1_CACHE_BYTES > 64 ? 128 : 64 -}; - struct tx_sw_desc { /* SW state per Tx descriptor */ struct sk_buff *skb; struct ulptx_sgl *sgl; @@ -155,16 +145,57 @@ struct rx_sw_desc { /* SW state per Rx descriptor */ }; /* - * The low bits of rx_sw_desc.dma_addr have special meaning. + * Rx buffer sizes for "useskbs" Free List buffers (one ingress packet pe skb + * buffer). We currently only support two sizes for 1500- and 9000-byte MTUs. + * We could easily support more but there doesn't seem to be much need for + * that ... + */ +#define FL_MTU_SMALL 1500 +#define FL_MTU_LARGE 9000 + +static inline unsigned int fl_mtu_bufsize(struct adapter *adapter, + unsigned int mtu) +{ + struct sge *s = &adapter->sge; + + return ALIGN(s->pktshift + ETH_HLEN + VLAN_HLEN + mtu, s->fl_align); +} + +#define FL_MTU_SMALL_BUFSIZE(adapter) fl_mtu_bufsize(adapter, FL_MTU_SMALL) +#define FL_MTU_LARGE_BUFSIZE(adapter) fl_mtu_bufsize(adapter, FL_MTU_LARGE) + +/* + * Bits 0..3 of rx_sw_desc.dma_addr have special meaning. The hardware uses + * these to specify the buffer size as an index into the SGE Free List Buffer + * Size register array. We also use bit 4, when the buffer has been unmapped + * for DMA, but this is of course never sent to the hardware and is only used + * to prevent double unmappings. All of the above requires that the Free List + * Buffers which we allocate have the bottom 5 bits free (0) -- i.e. are + * 32-byte or or a power of 2 greater in alignment. Since the SGE's minimal + * Free List Buffer alignment is 32 bytes, this works out for us ... */ enum { - RX_LARGE_BUF = 1 << 0, /* buffer is larger than PAGE_SIZE */ - RX_UNMAPPED_BUF = 1 << 1, /* buffer is not mapped */ + RX_BUF_FLAGS = 0x1f, /* bottom five bits are special */ + RX_BUF_SIZE = 0x0f, /* bottom three bits are for buf sizes */ + RX_UNMAPPED_BUF = 0x10, /* buffer is not mapped */ + + /* + * XXX We shouldn't depend on being able to use these indices. + * XXX Especially when some other Master PF has initialized the + * XXX adapter or we use the Firmware Configuration File. We + * XXX should really search through the Host Buffer Size register + * XXX array for the appropriately sized buffer indices. + */ + RX_SMALL_PG_BUF = 0x0, /* small (PAGE_SIZE) page buffer */ + RX_LARGE_PG_BUF = 0x1, /* buffer large (FL_PG_ORDER) page buffer */ + + RX_SMALL_MTU_BUF = 0x2, /* small MTU buffer */ + RX_LARGE_MTU_BUF = 0x3, /* large MTU buffer */ }; static inline dma_addr_t get_buf_addr(const struct rx_sw_desc *d) { - return d->dma_addr & ~(dma_addr_t)(RX_LARGE_BUF | RX_UNMAPPED_BUF); + return d->dma_addr & ~(dma_addr_t)RX_BUF_FLAGS; } static inline bool is_buf_mapped(const struct rx_sw_desc *d) @@ -392,14 +423,35 @@ static inline void reclaim_completed_tx(struct adapter *adap, struct sge_txq *q, } } -static inline int get_buf_size(const struct rx_sw_desc *d) +static inline int get_buf_size(struct adapter *adapter, + const struct rx_sw_desc *d) { -#if FL_PG_ORDER > 0 - return (d->dma_addr & RX_LARGE_BUF) ? (PAGE_SIZE << FL_PG_ORDER) : - PAGE_SIZE; -#else - return PAGE_SIZE; -#endif + struct sge *s = &adapter->sge; + unsigned int rx_buf_size_idx = d->dma_addr & RX_BUF_SIZE; + int buf_size; + + switch (rx_buf_size_idx) { + case RX_SMALL_PG_BUF: + buf_size = PAGE_SIZE; + break; + + case RX_LARGE_PG_BUF: + buf_size = PAGE_SIZE << s->fl_pg_order; + break; + + case RX_SMALL_MTU_BUF: + buf_size = FL_MTU_SMALL_BUFSIZE(adapter); + break; + + case RX_LARGE_MTU_BUF: + buf_size = FL_MTU_LARGE_BUFSIZE(adapter); + break; + + default: + BUG_ON(1); + } + + return buf_size; } /** @@ -418,7 +470,8 @@ static void free_rx_bufs(struct adapter *adap, struct sge_fl *q, int n) if (is_buf_mapped(d)) dma_unmap_page(adap->pdev_dev, get_buf_addr(d), - get_buf_size(d), PCI_DMA_FROMDEVICE); + get_buf_size(adap, d), + PCI_DMA_FROMDEVICE); put_page(d->page); d->page = NULL; if (++q->cidx == q->size) @@ -444,7 +497,7 @@ static void unmap_rx_buf(struct adapter *adap, struct sge_fl *q) if (is_buf_mapped(d)) dma_unmap_page(adap->pdev_dev, get_buf_addr(d), - get_buf_size(d), PCI_DMA_FROMDEVICE); + get_buf_size(adap, d), PCI_DMA_FROMDEVICE); d->page = NULL; if (++q->cidx == q->size) q->cidx = 0; @@ -485,6 +538,7 @@ static inline void set_rx_sw_desc(struct rx_sw_desc *sd, struct page *pg, static unsigned int refill_fl(struct adapter *adap, struct sge_fl *q, int n, gfp_t gfp) { + struct sge *s = &adap->sge; struct page *pg; dma_addr_t mapping; unsigned int cred = q->avail; @@ -493,25 +547,27 @@ static unsigned int refill_fl(struct adapter *adap, struct sge_fl *q, int n, gfp |= __GFP_NOWARN | __GFP_COLD; -#if FL_PG_ORDER > 0 + if (s->fl_pg_order == 0) + goto alloc_small_pages; + /* * Prefer large buffers */ while (n) { - pg = alloc_pages(gfp | __GFP_COMP, FL_PG_ORDER); + pg = alloc_pages(gfp | __GFP_COMP, s->fl_pg_order); if (unlikely(!pg)) { q->large_alloc_failed++; break; /* fall back to single pages */ } mapping = dma_map_page(adap->pdev_dev, pg, 0, - PAGE_SIZE << FL_PG_ORDER, + PAGE_SIZE << s->fl_pg_order, PCI_DMA_FROMDEVICE); if (unlikely(dma_mapping_error(adap->pdev_dev, mapping))) { - __free_pages(pg, FL_PG_ORDER); + __free_pages(pg, s->fl_pg_order); goto out; /* do not try small pages for this error */ } - mapping |= RX_LARGE_BUF; + mapping |= RX_LARGE_PG_BUF; *d++ = cpu_to_be64(mapping); set_rx_sw_desc(sd, pg, mapping); @@ -525,8 +581,8 @@ static unsigned int refill_fl(struct adapter *adap, struct sge_fl *q, int n, } n--; } -#endif +alloc_small_pages: while (n--) { pg = __skb_alloc_page(gfp, NULL); if (unlikely(!pg)) { @@ -769,8 +825,8 @@ static inline void ring_tx_db(struct adapter *adap, struct sge_txq *q, int n) wmb(); /* write descriptors before telling HW */ spin_lock(&q->db_lock); if (!q->db_disabled) { - t4_write_reg(adap, MYPF_REG(A_SGE_PF_KDOORBELL), - V_QID(q->cntxt_id) | V_PIDX(n)); + t4_write_reg(adap, MYPF_REG(SGE_PF_KDOORBELL), + QID(q->cntxt_id) | PIDX(n)); } q->db_pidx = q->pidx; spin_unlock(&q->db_lock); @@ -1519,6 +1575,8 @@ static noinline int handle_trace_pkt(struct adapter *adap, static void do_gro(struct sge_eth_rxq *rxq, const struct pkt_gl *gl, const struct cpl_rx_pkt *pkt) { + struct adapter *adapter = rxq->rspq.adap; + struct sge *s = &adapter->sge; int ret; struct sk_buff *skb; @@ -1529,8 +1587,8 @@ static void do_gro(struct sge_eth_rxq *rxq, const struct pkt_gl *gl, return; } - copy_frags(skb, gl, RX_PKT_PAD); - skb->len = gl->tot_len - RX_PKT_PAD; + copy_frags(skb, gl, s->pktshift); + skb->len = gl->tot_len - s->pktshift; skb->data_len = skb->len; skb->truesize += skb->data_len; skb->ip_summed = CHECKSUM_UNNECESSARY; @@ -1566,6 +1624,7 @@ int t4_ethrx_handler(struct sge_rspq *q, const __be64 *rsp, struct sk_buff *skb; const struct cpl_rx_pkt *pkt; struct sge_eth_rxq *rxq = container_of(q, struct sge_eth_rxq, rspq); + struct sge *s = &q->adap->sge; if (unlikely(*(u8 *)rsp == CPL_TRACE_PKT)) return handle_trace_pkt(q->adap, si); @@ -1585,7 +1644,7 @@ int t4_ethrx_handler(struct sge_rspq *q, const __be64 *rsp, return 0; } - __skb_pull(skb, RX_PKT_PAD); /* remove ethernet header padding */ + __skb_pull(skb, s->pktshift); /* remove ethernet header padding */ skb->protocol = eth_type_trans(skb, q->netdev); skb_record_rx_queue(skb, q->idx); if (skb->dev->features & NETIF_F_RXHASH) @@ -1696,6 +1755,8 @@ static int process_responses(struct sge_rspq *q, int budget) int budget_left = budget; const struct rsp_ctrl *rc; struct sge_eth_rxq *rxq = container_of(q, struct sge_eth_rxq, rspq); + struct adapter *adapter = q->adap; + struct sge *s = &adapter->sge; while (likely(budget_left)) { rc = (void *)q->cur_desc + (q->iqe_len - sizeof(*rc)); @@ -1722,7 +1783,7 @@ static int process_responses(struct sge_rspq *q, int budget) /* gather packet fragments */ for (frags = 0, fp = si.frags; ; frags++, fp++) { rsd = &rxq->fl.sdesc[rxq->fl.cidx]; - bufsz = get_buf_size(rsd); + bufsz = get_buf_size(adapter, rsd); fp->page = rsd->page; fp->offset = q->offset; fp->size = min(bufsz, len); @@ -1747,7 +1808,7 @@ static int process_responses(struct sge_rspq *q, int budget) si.nfrags = frags + 1; ret = q->handler(q, q->cur_desc, &si); if (likely(ret == 0)) - q->offset += ALIGN(fp->size, FL_ALIGN); + q->offset += ALIGN(fp->size, s->fl_align); else restore_rx_bufs(&si, &rxq->fl, frags); } else if (likely(rsp_type == RSP_TYPE_CPL)) { @@ -1983,6 +2044,7 @@ int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq, { int ret, flsz = 0; struct fw_iq_cmd c; + struct sge *s = &adap->sge; struct port_info *pi = netdev_priv(dev); /* Size needs to be multiple of 16, including status entry. */ @@ -2015,11 +2077,11 @@ int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq, fl->size = roundup(fl->size, 8); fl->desc = alloc_ring(adap->pdev_dev, fl->size, sizeof(__be64), sizeof(struct rx_sw_desc), &fl->addr, - &fl->sdesc, STAT_LEN, NUMA_NO_NODE); + &fl->sdesc, s->stat_len, NUMA_NO_NODE); if (!fl->desc) goto fl_nomem; - flsz = fl->size / 8 + STAT_LEN / sizeof(struct tx_desc); + flsz = fl->size / 8 + s->stat_len / sizeof(struct tx_desc); c.iqns_to_fl0congen = htonl(FW_IQ_CMD_FL0PACKEN | FW_IQ_CMD_FL0FETCHRO(1) | FW_IQ_CMD_FL0DATARO(1) | @@ -2096,14 +2158,15 @@ int t4_sge_alloc_eth_txq(struct adapter *adap, struct sge_eth_txq *txq, { int ret, nentries; struct fw_eq_eth_cmd c; + struct sge *s = &adap->sge; struct port_info *pi = netdev_priv(dev); /* Add status entries */ - nentries = txq->q.size + STAT_LEN / sizeof(struct tx_desc); + nentries = txq->q.size + s->stat_len / sizeof(struct tx_desc); txq->q.desc = alloc_ring(adap->pdev_dev, txq->q.size, sizeof(struct tx_desc), sizeof(struct tx_sw_desc), - &txq->q.phys_addr, &txq->q.sdesc, STAT_LEN, + &txq->q.phys_addr, &txq->q.sdesc, s->stat_len, netdev_queue_numa_node_read(netdevq)); if (!txq->q.desc) return -ENOMEM; @@ -2149,10 +2212,11 @@ int t4_sge_alloc_ctrl_txq(struct adapter *adap, struct sge_ctrl_txq *txq, { int ret, nentries; struct fw_eq_ctrl_cmd c; + struct sge *s = &adap->sge; struct port_info *pi = netdev_priv(dev); /* Add status entries */ - nentries = txq->q.size + STAT_LEN / sizeof(struct tx_desc); + nentries = txq->q.size + s->stat_len / sizeof(struct tx_desc); txq->q.desc = alloc_ring(adap->pdev_dev, nentries, sizeof(struct tx_desc), 0, &txq->q.phys_addr, @@ -2200,14 +2264,15 @@ int t4_sge_alloc_ofld_txq(struct adapter *adap, struct sge_ofld_txq *txq, { int ret, nentries; struct fw_eq_ofld_cmd c; + struct sge *s = &adap->sge; struct port_info *pi = netdev_priv(dev); /* Add status entries */ - nentries = txq->q.size + STAT_LEN / sizeof(struct tx_desc); + nentries = txq->q.size + s->stat_len / sizeof(struct tx_desc); txq->q.desc = alloc_ring(adap->pdev_dev, txq->q.size, sizeof(struct tx_desc), sizeof(struct tx_sw_desc), - &txq->q.phys_addr, &txq->q.sdesc, STAT_LEN, + &txq->q.phys_addr, &txq->q.sdesc, s->stat_len, NUMA_NO_NODE); if (!txq->q.desc) return -ENOMEM; @@ -2251,8 +2316,10 @@ int t4_sge_alloc_ofld_txq(struct adapter *adap, struct sge_ofld_txq *txq, static void free_txq(struct adapter *adap, struct sge_txq *q) { + struct sge *s = &adap->sge; + dma_free_coherent(adap->pdev_dev, - q->size * sizeof(struct tx_desc) + STAT_LEN, + q->size * sizeof(struct tx_desc) + s->stat_len, q->desc, q->phys_addr); q->cntxt_id = 0; q->sdesc = NULL; @@ -2262,6 +2329,7 @@ static void free_txq(struct adapter *adap, struct sge_txq *q) static void free_rspq_fl(struct adapter *adap, struct sge_rspq *rq, struct sge_fl *fl) { + struct sge *s = &adap->sge; unsigned int fl_id = fl ? fl->cntxt_id : 0xffff; adap->sge.ingr_map[rq->cntxt_id - adap->sge.ingr_start] = NULL; @@ -2276,7 +2344,7 @@ static void free_rspq_fl(struct adapter *adap, struct sge_rspq *rq, if (fl) { free_rx_bufs(adap, fl, fl->avail); - dma_free_coherent(adap->pdev_dev, fl->size * 8 + STAT_LEN, + dma_free_coherent(adap->pdev_dev, fl->size * 8 + s->stat_len, fl->desc, fl->addr); kfree(fl->sdesc); fl->sdesc = NULL; @@ -2408,18 +2476,112 @@ void t4_sge_stop(struct adapter *adap) * Performs SGE initialization needed every time after a chip reset. * We do not initialize any of the queues here, instead the driver * top-level must request them individually. + * + * Called in two different modes: + * + * 1. Perform actual hardware initialization and record hard-coded + * parameters which were used. This gets used when we're the + * Master PF and the Firmware Configuration File support didn't + * work for some reason. + * + * 2. We're not the Master PF or initialization was performed with + * a Firmware Configuration File. In this case we need to grab + * any of the SGE operating parameters that we need to have in + * order to do our job and make sure we can live with them ... */ -void t4_sge_init(struct adapter *adap) + +static int t4_sge_init_soft(struct adapter *adap) { - unsigned int i, v; struct sge *s = &adap->sge; - unsigned int fl_align_log = ilog2(FL_ALIGN); + u32 fl_small_pg, fl_large_pg, fl_small_mtu, fl_large_mtu; + u32 timer_value_0_and_1, timer_value_2_and_3, timer_value_4_and_5; + u32 ingress_rx_threshold; - t4_set_reg_field(adap, SGE_CONTROL, PKTSHIFT_MASK | - INGPADBOUNDARY_MASK | EGRSTATUSPAGESIZE, - INGPADBOUNDARY(fl_align_log - 5) | PKTSHIFT(2) | - RXPKTCPLMODE | - (STAT_LEN == 128 ? EGRSTATUSPAGESIZE : 0)); + /* + * Verify that CPL messages are going to the Ingress Queue for + * process_responses() and that only packet data is going to the + * Free Lists. + */ + if ((t4_read_reg(adap, SGE_CONTROL) & RXPKTCPLMODE_MASK) != + RXPKTCPLMODE(X_RXPKTCPLMODE_SPLIT)) { + dev_err(adap->pdev_dev, "bad SGE CPL MODE\n"); + return -EINVAL; + } + + /* + * Validate the Host Buffer Register Array indices that we want to + * use ... + * + * XXX Note that we should really read through the Host Buffer Size + * XXX register array and find the indices of the Buffer Sizes which + * XXX meet our needs! + */ + #define READ_FL_BUF(x) \ + t4_read_reg(adap, SGE_FL_BUFFER_SIZE0+(x)*sizeof(u32)) + + fl_small_pg = READ_FL_BUF(RX_SMALL_PG_BUF); + fl_large_pg = READ_FL_BUF(RX_LARGE_PG_BUF); + fl_small_mtu = READ_FL_BUF(RX_SMALL_MTU_BUF); + fl_large_mtu = READ_FL_BUF(RX_LARGE_MTU_BUF); + + #undef READ_FL_BUF + + if (fl_small_pg != PAGE_SIZE || + (fl_large_pg != 0 && (fl_large_pg <= fl_small_pg || + (fl_large_pg & (fl_large_pg-1)) != 0))) { + dev_err(adap->pdev_dev, "bad SGE FL page buffer sizes [%d, %d]\n", + fl_small_pg, fl_large_pg); + return -EINVAL; + } + if (fl_large_pg) + s->fl_pg_order = ilog2(fl_large_pg) - PAGE_SHIFT; + + if (fl_small_mtu < FL_MTU_SMALL_BUFSIZE(adap) || + fl_large_mtu < FL_MTU_LARGE_BUFSIZE(adap)) { + dev_err(adap->pdev_dev, "bad SGE FL MTU sizes [%d, %d]\n", + fl_small_mtu, fl_large_mtu); + return -EINVAL; + } + + /* + * Retrieve our RX interrupt holdoff timer values and counter + * threshold values from the SGE parameters. + */ + timer_value_0_and_1 = t4_read_reg(adap, SGE_TIMER_VALUE_0_AND_1); + timer_value_2_and_3 = t4_read_reg(adap, SGE_TIMER_VALUE_2_AND_3); + timer_value_4_and_5 = t4_read_reg(adap, SGE_TIMER_VALUE_4_AND_5); + s->timer_val[0] = core_ticks_to_us(adap, + TIMERVALUE0_GET(timer_value_0_and_1)); + s->timer_val[1] = core_ticks_to_us(adap, + TIMERVALUE1_GET(timer_value_0_and_1)); + s->timer_val[2] = core_ticks_to_us(adap, + TIMERVALUE2_GET(timer_value_2_and_3)); + s->timer_val[3] = core_ticks_to_us(adap, + TIMERVALUE3_GET(timer_value_2_and_3)); + s->timer_val[4] = core_ticks_to_us(adap, + TIMERVALUE4_GET(timer_value_4_and_5)); + s->timer_val[5] = core_ticks_to_us(adap, + TIMERVALUE5_GET(timer_value_4_and_5)); + + ingress_rx_threshold = t4_read_reg(adap, SGE_INGRESS_RX_THRESHOLD); + s->counter_val[0] = THRESHOLD_0_GET(ingress_rx_threshold); + s->counter_val[1] = THRESHOLD_1_GET(ingress_rx_threshold); + s->counter_val[2] = THRESHOLD_2_GET(ingress_rx_threshold); + s->counter_val[3] = THRESHOLD_3_GET(ingress_rx_threshold); + + return 0; +} + +static int t4_sge_init_hard(struct adapter *adap) +{ + struct sge *s = &adap->sge; + + /* + * Set up our basic SGE mode to deliver CPL messages to our Ingress + * Queue and Packet Date to the Free List. + */ + t4_set_reg_field(adap, SGE_CONTROL, RXPKTCPLMODE_MASK, + RXPKTCPLMODE_MASK); /* * Set up to drop DOORBELL writes when the DOORBELL FIFO overflows @@ -2433,13 +2595,24 @@ void t4_sge_init(struct adapter *adap) t4_set_reg_field(adap, A_SGE_DOORBELL_CONTROL, F_ENABLE_DROP, F_ENABLE_DROP); - for (i = v = 0; i < 32; i += 4) - v |= (PAGE_SHIFT - 10) << i; - t4_write_reg(adap, SGE_HOST_PAGE_SIZE, v); - t4_write_reg(adap, SGE_FL_BUFFER_SIZE0, PAGE_SIZE); -#if FL_PG_ORDER > 0 - t4_write_reg(adap, SGE_FL_BUFFER_SIZE1, PAGE_SIZE << FL_PG_ORDER); -#endif + /* + * SGE_FL_BUFFER_SIZE0 (RX_SMALL_PG_BUF) is set up by + * t4_fixup_host_params(). + */ + s->fl_pg_order = FL_PG_ORDER; + if (s->fl_pg_order) + t4_write_reg(adap, + SGE_FL_BUFFER_SIZE0+RX_LARGE_PG_BUF*sizeof(u32), + PAGE_SIZE << FL_PG_ORDER); + t4_write_reg(adap, SGE_FL_BUFFER_SIZE0+RX_SMALL_MTU_BUF*sizeof(u32), + FL_MTU_SMALL_BUFSIZE(adap)); + t4_write_reg(adap, SGE_FL_BUFFER_SIZE0+RX_LARGE_MTU_BUF*sizeof(u32), + FL_MTU_LARGE_BUFSIZE(adap)); + + /* + * Note that the SGE Ingress Packet Count Interrupt Threshold and + * Timer Holdoff values must be supplied by our caller. + */ t4_write_reg(adap, SGE_INGRESS_RX_THRESHOLD, THRESHOLD_0(s->counter_val[0]) | THRESHOLD_1(s->counter_val[1]) | @@ -2449,14 +2622,54 @@ void t4_sge_init(struct adapter *adap) TIMERVALUE0(us_to_core_ticks(adap, s->timer_val[0])) | TIMERVALUE1(us_to_core_ticks(adap, s->timer_val[1]))); t4_write_reg(adap, SGE_TIMER_VALUE_2_AND_3, - TIMERVALUE0(us_to_core_ticks(adap, s->timer_val[2])) | - TIMERVALUE1(us_to_core_ticks(adap, s->timer_val[3]))); + TIMERVALUE2(us_to_core_ticks(adap, s->timer_val[2])) | + TIMERVALUE3(us_to_core_ticks(adap, s->timer_val[3]))); t4_write_reg(adap, SGE_TIMER_VALUE_4_AND_5, - TIMERVALUE0(us_to_core_ticks(adap, s->timer_val[4])) | - TIMERVALUE1(us_to_core_ticks(adap, s->timer_val[5]))); + TIMERVALUE4(us_to_core_ticks(adap, s->timer_val[4])) | + TIMERVALUE5(us_to_core_ticks(adap, s->timer_val[5]))); + + return 0; +} + +int t4_sge_init(struct adapter *adap) +{ + struct sge *s = &adap->sge; + u32 sge_control; + int ret; + + /* + * Ingress Padding Boundary and Egress Status Page Size are set up by + * t4_fixup_host_params(). + */ + sge_control = t4_read_reg(adap, SGE_CONTROL); + s->pktshift = PKTSHIFT_GET(sge_control); + s->stat_len = (sge_control & EGRSTATUSPAGESIZE_MASK) ? 128 : 64; + s->fl_align = 1 << (INGPADBOUNDARY_GET(sge_control) + + X_INGPADBOUNDARY_SHIFT); + + if (adap->flags & USING_SOFT_PARAMS) + ret = t4_sge_init_soft(adap); + else + ret = t4_sge_init_hard(adap); + if (ret < 0) + return ret; + + /* + * A FL with <= fl_starve_thres buffers is starving and a periodic + * timer will attempt to refill it. This needs to be larger than the + * SGE's Egress Congestion Threshold. If it isn't, then we can get + * stuck waiting for new packets while the SGE is waiting for us to + * give it more Free List entries. (Note that the SGE's Egress + * Congestion Threshold is in units of 2 Free List pointers.) + */ + s->fl_starve_thres + = EGRTHRESHOLD_GET(t4_read_reg(adap, SGE_CONM_CTRL))*2 + 1; + setup_timer(&s->rx_timer, sge_rx_timer_cb, (unsigned long)adap); setup_timer(&s->tx_timer, sge_tx_timer_cb, (unsigned long)adap); s->starve_thres = core_ticks_per_usec(adap) * 1000000; /* 1 s */ s->idma_state[0] = s->idma_state[1] = 0; spin_lock_init(&s->intrq_lock); + + return 0; } diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index af16013..35b81d8 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -120,6 +120,28 @@ static void t4_read_indirect(struct adapter *adap, unsigned int addr_reg, } } +/** + * t4_write_indirect - write indirectly addressed registers + * @adap: the adapter + * @addr_reg: register holding the indirect addresses + * @data_reg: register holding the value for the indirect registers + * @vals: values to write + * @nregs: how many indirect registers to write + * @start_idx: address of first indirect register to write + * + * Writes a sequential block of registers that are accessed indirectly + * through an address/data register pair. + */ +void t4_write_indirect(struct adapter *adap, unsigned int addr_reg, + unsigned int data_reg, const u32 *vals, + unsigned int nregs, unsigned int start_idx) +{ + while (nregs--) { + t4_write_reg(adap, addr_reg, start_idx++); + t4_write_reg(adap, data_reg, *vals++); + } +} + /* * Get the reply to a mailbox command and store it in @rpl in big-endian order. */ @@ -330,6 +352,143 @@ int t4_edc_read(struct adapter *adap, int idx, u32 addr, __be32 *data, u64 *ecc) return 0; } +/* + * t4_mem_win_rw - read/write memory through PCIE memory window + * @adap: the adapter + * @addr: address of first byte requested + * @data: MEMWIN0_APERTURE bytes of data containing the requested address + * @dir: direction of transfer 1 => read, 0 => write + * + * Read/write MEMWIN0_APERTURE bytes of data from MC starting at a + * MEMWIN0_APERTURE-byte-aligned address that covers the requested + * address @addr. + */ +static int t4_mem_win_rw(struct adapter *adap, u32 addr, __be32 *data, int dir) +{ + int i; + + /* + * Setup offset into PCIE memory window. Address must be a + * MEMWIN0_APERTURE-byte-aligned address. (Read back MA register to + * ensure that changes propagate before we attempt to use the new + * values.) + */ + t4_write_reg(adap, PCIE_MEM_ACCESS_OFFSET, + addr & ~(MEMWIN0_APERTURE - 1)); + t4_read_reg(adap, PCIE_MEM_ACCESS_OFFSET); + + /* Collecting data 4 bytes at a time upto MEMWIN0_APERTURE */ + for (i = 0; i < MEMWIN0_APERTURE; i = i+0x4) { + if (dir) + *data++ = t4_read_reg(adap, (MEMWIN0_BASE + i)); + else + t4_write_reg(adap, (MEMWIN0_BASE + i), *data++); + } + + return 0; +} + +/** + * t4_memory_rw - read/write EDC 0, EDC 1 or MC via PCIE memory window + * @adap: the adapter + * @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC + * @addr: address within indicated memory type + * @len: amount of memory to transfer + * @buf: host memory buffer + * @dir: direction of transfer 1 => read, 0 => write + * + * Reads/writes an [almost] arbitrary memory region in the firmware: the + * firmware memory address, length and host buffer must be aligned on + * 32-bit boudaries. The memory is transferred as a raw byte sequence + * from/to the firmware's memory. If this memory contains data + * structures which contain multi-byte integers, it's the callers + * responsibility to perform appropriate byte order conversions. + */ +static int t4_memory_rw(struct adapter *adap, int mtype, u32 addr, u32 len, + __be32 *buf, int dir) +{ + u32 pos, start, end, offset, memoffset; + int ret; + + /* + * Argument sanity checks ... + */ + if ((addr & 0x3) || (len & 0x3)) + return -EINVAL; + + /* + * Offset into the region of memory which is being accessed + * MEM_EDC0 = 0 + * MEM_EDC1 = 1 + * MEM_MC = 2 + */ + memoffset = (mtype * (5 * 1024 * 1024)); + + /* Determine the PCIE_MEM_ACCESS_OFFSET */ + addr = addr + memoffset; + + /* + * The underlaying EDC/MC read routines read MEMWIN0_APERTURE bytes + * at a time so we need to round down the start and round up the end. + * We'll start copying out of the first line at (addr - start) a word + * at a time. + */ + start = addr & ~(MEMWIN0_APERTURE-1); + end = (addr + len + MEMWIN0_APERTURE-1) & ~(MEMWIN0_APERTURE-1); + offset = (addr - start)/sizeof(__be32); + + for (pos = start; pos < end; pos += MEMWIN0_APERTURE, offset = 0) { + __be32 data[MEMWIN0_APERTURE/sizeof(__be32)]; + + /* + * If we're writing, copy the data from the caller's memory + * buffer + */ + if (!dir) { + /* + * If we're doing a partial write, then we need to do + * a read-modify-write ... + */ + if (offset || len < MEMWIN0_APERTURE) { + ret = t4_mem_win_rw(adap, pos, data, 1); + if (ret) + return ret; + } + while (offset < (MEMWIN0_APERTURE/sizeof(__be32)) && + len > 0) { + data[offset++] = *buf++; + len -= sizeof(__be32); + } + } + + /* + * Transfer a block of memory and bail if there's an error. + */ + ret = t4_mem_win_rw(adap, pos, data, dir); + if (ret) + return ret; + + /* + * If we're reading, copy the data into the caller's memory + * buffer. + */ + if (dir) + while (offset < (MEMWIN0_APERTURE/sizeof(__be32)) && + len > 0) { + *buf++ = data[offset++]; + len -= sizeof(__be32); + } + } + + return 0; +} + +int t4_memory_write(struct adapter *adap, int mtype, u32 addr, u32 len, + __be32 *buf) +{ + return t4_memory_rw(adap, mtype, addr, len, buf, 0); +} + #define EEPROM_STAT_ADDR 0x7bfc #define VPD_BASE 0 #define VPD_LEN 512 @@ -355,8 +514,9 @@ int t4_seeprom_wp(struct adapter *adapter, bool enable) * * Reads card parameters stored in VPD EEPROM. */ -static int get_vpd_params(struct adapter *adapter, struct vpd_params *p) +int get_vpd_params(struct adapter *adapter, struct vpd_params *p) { + u32 cclk_param, cclk_val; int i, ret; int ec, sn; u8 vpd[VPD_LEN], csum; @@ -418,6 +578,19 @@ static int get_vpd_params(struct adapter *adapter, struct vpd_params *p) i = pci_vpd_info_field_size(vpd + sn - PCI_VPD_INFO_FLD_HDR_SIZE); memcpy(p->sn, vpd + sn, min(i, SERNUM_LEN)); strim(p->sn); + + /* + * Ask firmware for the Core Clock since it knows how to translate the + * Reference Clock ('V2') VPD field into a Core Clock value ... + */ + cclk_param = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CCLK)); + ret = t4_query_params(adapter, adapter->mbox, 0, 0, + 1, &cclk_param, &cclk_val); + if (ret) + return ret; + p->cclk = cclk_val; + return 0; } @@ -718,6 +891,77 @@ static int t4_flash_erase_sectors(struct adapter *adapter, int start, int end) } /** + * t4_flash_cfg_addr - return the address of the flash configuration file + * @adapter: the adapter + * + * Return the address within the flash where the Firmware Configuration + * File is stored. + */ +unsigned int t4_flash_cfg_addr(struct adapter *adapter) +{ + if (adapter->params.sf_size == 0x100000) + return FLASH_FPGA_CFG_START; + else + return FLASH_CFG_START; +} + +/** + * t4_load_cfg - download config file + * @adap: the adapter + * @cfg_data: the cfg text file to write + * @size: text file size + * + * Write the supplied config text file to the card's serial flash. + */ +int t4_load_cfg(struct adapter *adap, const u8 *cfg_data, unsigned int size) +{ + int ret, i, n; + unsigned int addr; + unsigned int flash_cfg_start_sec; + unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec; + + addr = t4_flash_cfg_addr(adap); + flash_cfg_start_sec = addr / SF_SEC_SIZE; + + if (size > FLASH_CFG_MAX_SIZE) { + dev_err(adap->pdev_dev, "cfg file too large, max is %u bytes\n", + FLASH_CFG_MAX_SIZE); + return -EFBIG; + } + + i = DIV_ROUND_UP(FLASH_CFG_MAX_SIZE, /* # of sectors spanned */ + sf_sec_size); + ret = t4_flash_erase_sectors(adap, flash_cfg_start_sec, + flash_cfg_start_sec + i - 1); + /* + * If size == 0 then we're simply erasing the FLASH sectors associated + * with the on-adapter Firmware Configuration File. + */ + if (ret || size == 0) + goto out; + + /* this will write to the flash up to SF_PAGE_SIZE at a time */ + for (i = 0; i < size; i += SF_PAGE_SIZE) { + if ((size - i) < SF_PAGE_SIZE) + n = size - i; + else + n = SF_PAGE_SIZE; + ret = t4_write_flash(adap, addr, n, cfg_data); + if (ret) + goto out; + + addr += SF_PAGE_SIZE; + cfg_data += SF_PAGE_SIZE; + } + +out: + if (ret) + dev_err(adap->pdev_dev, "config file %s failed %d\n", + (size == 0 ? "clear" : "download"), ret); + return ret; +} + +/** * t4_load_fw - download firmware * @adap: the adapter * @fw_data: the firmware image to write @@ -1018,9 +1262,9 @@ static void sge_intr_handler(struct adapter *adapter) { ERR_INVALID_CIDX_INC, "SGE GTS CIDX increment too large", -1, 0 }, { ERR_CPL_OPCODE_0, "SGE received 0-length CPL", -1, 0 }, - { F_DBFIFO_LP_INT, NULL, -1, 0, t4_db_full }, - { F_DBFIFO_HP_INT, NULL, -1, 0, t4_db_full }, - { F_ERR_DROPPED_DB, NULL, -1, 0, t4_db_dropped }, + { DBFIFO_LP_INT, NULL, -1, 0, t4_db_full }, + { DBFIFO_HP_INT, NULL, -1, 0, t4_db_full }, + { ERR_DROPPED_DB, NULL, -1, 0, t4_db_dropped }, { ERR_DATA_CPL_ON_HIGH_QID1 | ERR_DATA_CPL_ON_HIGH_QID0, "SGE IQID > 1023 received CPL for FL", -1, 0 }, { ERR_BAD_DB_PIDX3, "SGE DBP 3 pidx increment too large", -1, @@ -1520,7 +1764,7 @@ void t4_intr_enable(struct adapter *adapter) ERR_BAD_DB_PIDX2 | ERR_BAD_DB_PIDX1 | ERR_BAD_DB_PIDX0 | ERR_ING_CTXT_PRIO | ERR_EGR_CTXT_PRIO | INGRESS_SIZE_ERR | - F_DBFIFO_HP_INT | F_DBFIFO_LP_INT | + DBFIFO_HP_INT | DBFIFO_LP_INT | EGRESS_SIZE_ERR); t4_write_reg(adapter, MYPF_REG(PL_PF_INT_ENABLE), PF_INTR_MASK); t4_set_reg_field(adapter, PL_INT_MAP0, 0, 1 << pf); @@ -1717,6 +1961,23 @@ void t4_read_mtu_tbl(struct adapter *adap, u16 *mtus, u8 *mtu_log) } /** + * t4_tp_wr_bits_indirect - set/clear bits in an indirect TP register + * @adap: the adapter + * @addr: the indirect TP register address + * @mask: specifies the field within the register to modify + * @val: new value for the field + * + * Sets a field of an indirect TP register to the given value. + */ +void t4_tp_wr_bits_indirect(struct adapter *adap, unsigned int addr, + unsigned int mask, unsigned int val) +{ + t4_write_reg(adap, TP_PIO_ADDR, addr); + val |= t4_read_reg(adap, TP_PIO_DATA) & ~mask; + t4_write_reg(adap, TP_PIO_DATA, val); +} + +/** * init_cong_ctrl - initialize congestion control parameters * @a: the alpha values for congestion control * @b: the beta values for congestion control @@ -2000,9 +2261,9 @@ int t4_fwaddrspace_write(struct adapter *adap, unsigned int mbox, struct fw_ldst_cmd c; memset(&c, 0, sizeof(c)); - c.op_to_addrspace = htonl(V_FW_CMD_OP(FW_LDST_CMD) | F_FW_CMD_REQUEST | - F_FW_CMD_WRITE | - V_FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_FIRMWARE)); + c.op_to_addrspace = htonl(FW_CMD_OP(FW_LDST_CMD) | FW_CMD_REQUEST | + FW_CMD_WRITE | + FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_FIRMWARE)); c.cycles_to_len16 = htonl(FW_LEN16(c)); c.u.addrval.addr = htonl(addr); c.u.addrval.val = htonl(val); @@ -2033,8 +2294,8 @@ int t4_mem_win_read_len(struct adapter *adap, u32 addr, __be32 *data, int len) if ((addr & 3) || (len + off) > MEMWIN0_APERTURE) return -EINVAL; - t4_write_reg(adap, A_PCIE_MEM_ACCESS_OFFSET, addr & ~15); - t4_read_reg(adap, A_PCIE_MEM_ACCESS_OFFSET); + t4_write_reg(adap, PCIE_MEM_ACCESS_OFFSET, addr & ~15); + t4_read_reg(adap, PCIE_MEM_ACCESS_OFFSET); for (i = 0; i < len; i += 4) *data++ = t4_read_reg(adap, (MEMWIN0_BASE + off + i)); @@ -2102,39 +2363,129 @@ int t4_mdio_wr(struct adapter *adap, unsigned int mbox, unsigned int phy_addr, } /** - * t4_fw_hello - establish communication with FW - * @adap: the adapter - * @mbox: mailbox to use for the FW command - * @evt_mbox: mailbox to receive async FW events - * @master: specifies the caller's willingness to be the device master - * @state: returns the current device state + * t4_fw_hello - establish communication with FW + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @evt_mbox: mailbox to receive async FW events + * @master: specifies the caller's willingness to be the device master + * @state: returns the current device state (if non-NULL) * - * Issues a command to establish communication with FW. + * Issues a command to establish communication with FW. Returns either + * an error (negative integer) or the mailbox of the Master PF. */ int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox, enum dev_master master, enum dev_state *state) { int ret; struct fw_hello_cmd c; + u32 v; + unsigned int master_mbox; + int retries = FW_CMD_HELLO_RETRIES; +retry: + memset(&c, 0, sizeof(c)); INIT_CMD(c, HELLO, WRITE); c.err_to_mbasyncnot = htonl( FW_HELLO_CMD_MASTERDIS(master == MASTER_CANT) | FW_HELLO_CMD_MASTERFORCE(master == MASTER_MUST) | - FW_HELLO_CMD_MBMASTER(master == MASTER_MUST ? mbox : 0xff) | - FW_HELLO_CMD_MBASYNCNOT(evt_mbox)); + FW_HELLO_CMD_MBMASTER(master == MASTER_MUST ? mbox : + FW_HELLO_CMD_MBMASTER_MASK) | + FW_HELLO_CMD_MBASYNCNOT(evt_mbox) | + FW_HELLO_CMD_STAGE(fw_hello_cmd_stage_os) | + FW_HELLO_CMD_CLEARINIT); + /* + * Issue the HELLO command to the firmware. If it's not successful + * but indicates that we got a "busy" or "timeout" condition, retry + * the HELLO until we exhaust our retry limit. + */ ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); - if (ret == 0 && state) { - u32 v = ntohl(c.err_to_mbasyncnot); - if (v & FW_HELLO_CMD_INIT) - *state = DEV_STATE_INIT; - else if (v & FW_HELLO_CMD_ERR) + if (ret < 0) { + if ((ret == -EBUSY || ret == -ETIMEDOUT) && retries-- > 0) + goto retry; + return ret; + } + + v = ntohl(c.err_to_mbasyncnot); + master_mbox = FW_HELLO_CMD_MBMASTER_GET(v); + if (state) { + if (v & FW_HELLO_CMD_ERR) *state = DEV_STATE_ERR; + else if (v & FW_HELLO_CMD_INIT) + *state = DEV_STATE_INIT; else *state = DEV_STATE_UNINIT; } - return ret; + + /* + * If we're not the Master PF then we need to wait around for the + * Master PF Driver to finish setting up the adapter. + * + * Note that we also do this wait if we're a non-Master-capable PF and + * there is no current Master PF; a Master PF may show up momentarily + * and we wouldn't want to fail pointlessly. (This can happen when an + * OS loads lots of different drivers rapidly at the same time). In + * this case, the Master PF returned by the firmware will be + * FW_PCIE_FW_MASTER_MASK so the test below will work ... + */ + if ((v & (FW_HELLO_CMD_ERR|FW_HELLO_CMD_INIT)) == 0 && + master_mbox != mbox) { + int waiting = FW_CMD_HELLO_TIMEOUT; + + /* + * Wait for the firmware to either indicate an error or + * initialized state. If we see either of these we bail out + * and report the issue to the caller. If we exhaust the + * "hello timeout" and we haven't exhausted our retries, try + * again. Otherwise bail with a timeout error. + */ + for (;;) { + u32 pcie_fw; + + msleep(50); + waiting -= 50; + + /* + * If neither Error nor Initialialized are indicated + * by the firmware keep waiting till we exaust our + * timeout ... and then retry if we haven't exhausted + * our retries ... + */ + pcie_fw = t4_read_reg(adap, MA_PCIE_FW); + if (!(pcie_fw & (FW_PCIE_FW_ERR|FW_PCIE_FW_INIT))) { + if (waiting <= 0) { + if (retries-- > 0) + goto retry; + + return -ETIMEDOUT; + } + continue; + } + + /* + * We either have an Error or Initialized condition + * report errors preferentially. + */ + if (state) { + if (pcie_fw & FW_PCIE_FW_ERR) + *state = DEV_STATE_ERR; + else if (pcie_fw & FW_PCIE_FW_INIT) + *state = DEV_STATE_INIT; + } + + /* + * If we arrived before a Master PF was selected and + * there's not a valid Master PF, grab its identity + * for our caller. + */ + if (master_mbox == FW_PCIE_FW_MASTER_MASK && + (pcie_fw & FW_PCIE_FW_MASTER_VLD)) + master_mbox = FW_PCIE_FW_MASTER_GET(pcie_fw); + break; + } + } + + return master_mbox; } /** @@ -2186,6 +2537,334 @@ int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset) } /** + * t4_fw_halt - issue a reset/halt to FW and put uP into RESET + * @adap: the adapter + * @mbox: mailbox to use for the FW RESET command (if desired) + * @force: force uP into RESET even if FW RESET command fails + * + * Issues a RESET command to firmware (if desired) with a HALT indication + * and then puts the microprocessor into RESET state. The RESET command + * will only be issued if a legitimate mailbox is provided (mbox <= + * FW_PCIE_FW_MASTER_MASK). + * + * This is generally used in order for the host to safely manipulate the + * adapter without fear of conflicting with whatever the firmware might + * be doing. The only way out of this state is to RESTART the firmware + * ... + */ +int t4_fw_halt(struct adapter *adap, unsigned int mbox, int force) +{ + int ret = 0; + + /* + * If a legitimate mailbox is provided, issue a RESET command + * with a HALT indication. + */ + if (mbox <= FW_PCIE_FW_MASTER_MASK) { + struct fw_reset_cmd c; + + memset(&c, 0, sizeof(c)); + INIT_CMD(c, RESET, WRITE); + c.val = htonl(PIORST | PIORSTMODE); + c.halt_pkd = htonl(FW_RESET_CMD_HALT(1U)); + ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); + } + + /* + * Normally we won't complete the operation if the firmware RESET + * command fails but if our caller insists we'll go ahead and put the + * uP into RESET. This can be useful if the firmware is hung or even + * missing ... We'll have to take the risk of putting the uP into + * RESET without the cooperation of firmware in that case. + * + * We also force the firmware's HALT flag to be on in case we bypassed + * the firmware RESET command above or we're dealing with old firmware + * which doesn't have the HALT capability. This will serve as a flag + * for the incoming firmware to know that it's coming out of a HALT + * rather than a RESET ... if it's new enough to understand that ... + */ + if (ret == 0 || force) { + t4_set_reg_field(adap, CIM_BOOT_CFG, UPCRST, UPCRST); + t4_set_reg_field(adap, PCIE_FW, FW_PCIE_FW_HALT, + FW_PCIE_FW_HALT); + } + + /* + * And we always return the result of the firmware RESET command + * even when we force the uP into RESET ... + */ + return ret; +} + +/** + * t4_fw_restart - restart the firmware by taking the uP out of RESET + * @adap: the adapter + * @reset: if we want to do a RESET to restart things + * + * Restart firmware previously halted by t4_fw_halt(). On successful + * return the previous PF Master remains as the new PF Master and there + * is no need to issue a new HELLO command, etc. + * + * We do this in two ways: + * + * 1. If we're dealing with newer firmware we'll simply want to take + * the chip's microprocessor out of RESET. This will cause the + * firmware to start up from its start vector. And then we'll loop + * until the firmware indicates it's started again (PCIE_FW.HALT + * reset to 0) or we timeout. + * + * 2. If we're dealing with older firmware then we'll need to RESET + * the chip since older firmware won't recognize the PCIE_FW.HALT + * flag and automatically RESET itself on startup. + */ +int t4_fw_restart(struct adapter *adap, unsigned int mbox, int reset) +{ + if (reset) { + /* + * Since we're directing the RESET instead of the firmware + * doing it automatically, we need to clear the PCIE_FW.HALT + * bit. + */ + t4_set_reg_field(adap, PCIE_FW, FW_PCIE_FW_HALT, 0); + + /* + * If we've been given a valid mailbox, first try to get the + * firmware to do the RESET. If that works, great and we can + * return success. Otherwise, if we haven't been given a + * valid mailbox or the RESET command failed, fall back to + * hitting the chip with a hammer. + */ + if (mbox <= FW_PCIE_FW_MASTER_MASK) { + t4_set_reg_field(adap, CIM_BOOT_CFG, UPCRST, 0); + msleep(100); + if (t4_fw_reset(adap, mbox, + PIORST | PIORSTMODE) == 0) + return 0; + } + + t4_write_reg(adap, PL_RST, PIORST | PIORSTMODE); + msleep(2000); + } else { + int ms; + + t4_set_reg_field(adap, CIM_BOOT_CFG, UPCRST, 0); + for (ms = 0; ms < FW_CMD_MAX_TIMEOUT; ) { + if (!(t4_read_reg(adap, PCIE_FW) & FW_PCIE_FW_HALT)) + return 0; + msleep(100); + ms += 100; + } + return -ETIMEDOUT; + } + return 0; +} + +/** + * t4_fw_upgrade - perform all of the steps necessary to upgrade FW + * @adap: the adapter + * @mbox: mailbox to use for the FW RESET command (if desired) + * @fw_data: the firmware image to write + * @size: image size + * @force: force upgrade even if firmware doesn't cooperate + * + * Perform all of the steps necessary for upgrading an adapter's + * firmware image. Normally this requires the cooperation of the + * existing firmware in order to halt all existing activities + * but if an invalid mailbox token is passed in we skip that step + * (though we'll still put the adapter microprocessor into RESET in + * that case). + * + * On successful return the new firmware will have been loaded and + * the adapter will have been fully RESET losing all previous setup + * state. On unsuccessful return the adapter may be completely hosed ... + * positive errno indicates that the adapter is ~probably~ intact, a + * negative errno indicates that things are looking bad ... + */ +int t4_fw_upgrade(struct adapter *adap, unsigned int mbox, + const u8 *fw_data, unsigned int size, int force) +{ + const struct fw_hdr *fw_hdr = (const struct fw_hdr *)fw_data; + int reset, ret; + + ret = t4_fw_halt(adap, mbox, force); + if (ret < 0 && !force) + return ret; + + ret = t4_load_fw(adap, fw_data, size); + if (ret < 0) + return ret; + + /* + * Older versions of the firmware don't understand the new + * PCIE_FW.HALT flag and so won't know to perform a RESET when they + * restart. So for newly loaded older firmware we'll have to do the + * RESET for it so it starts up on a clean slate. We can tell if + * the newly loaded firmware will handle this right by checking + * its header flags to see if it advertises the capability. + */ + reset = ((ntohl(fw_hdr->flags) & FW_HDR_FLAGS_RESET_HALT) == 0); + return t4_fw_restart(adap, mbox, reset); +} + + +/** + * t4_fw_config_file - setup an adapter via a Configuration File + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @mtype: the memory type where the Configuration File is located + * @maddr: the memory address where the Configuration File is located + * @finiver: return value for CF [fini] version + * @finicsum: return value for CF [fini] checksum + * @cfcsum: return value for CF computed checksum + * + * Issue a command to get the firmware to process the Configuration + * File located at the specified mtype/maddress. If the Configuration + * File is processed successfully and return value pointers are + * provided, the Configuration File "[fini] section version and + * checksum values will be returned along with the computed checksum. + * It's up to the caller to decide how it wants to respond to the + * checksums not matching but it recommended that a prominant warning + * be emitted in order to help people rapidly identify changed or + * corrupted Configuration Files. + * + * Also note that it's possible to modify things like "niccaps", + * "toecaps",etc. between processing the Configuration File and telling + * the firmware to use the new configuration. Callers which want to + * do this will need to "hand-roll" their own CAPS_CONFIGS commands for + * Configuration Files if they want to do this. + */ +int t4_fw_config_file(struct adapter *adap, unsigned int mbox, + unsigned int mtype, unsigned int maddr, + u32 *finiver, u32 *finicsum, u32 *cfcsum) +{ + struct fw_caps_config_cmd caps_cmd; + int ret; + + /* + * Tell the firmware to process the indicated Configuration File. + * If there are no errors and the caller has provided return value + * pointers for the [fini] section version, checksum and computed + * checksum, pass those back to the caller. + */ + memset(&caps_cmd, 0, sizeof(caps_cmd)); + caps_cmd.op_to_write = + htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | + FW_CMD_READ); + caps_cmd.retval_len16 = + htonl(FW_CAPS_CONFIG_CMD_CFVALID | + FW_CAPS_CONFIG_CMD_MEMTYPE_CF(mtype) | + FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(maddr >> 16) | + FW_LEN16(caps_cmd)); + ret = t4_wr_mbox(adap, mbox, &caps_cmd, sizeof(caps_cmd), &caps_cmd); + if (ret < 0) + return ret; + + if (finiver) + *finiver = ntohl(caps_cmd.finiver); + if (finicsum) + *finicsum = ntohl(caps_cmd.finicsum); + if (cfcsum) + *cfcsum = ntohl(caps_cmd.cfcsum); + + /* + * And now tell the firmware to use the configuration we just loaded. + */ + caps_cmd.op_to_write = + htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) | + FW_CMD_REQUEST | + FW_CMD_WRITE); + caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd)); + return t4_wr_mbox(adap, mbox, &caps_cmd, sizeof(caps_cmd), NULL); +} + +/** + * t4_fixup_host_params - fix up host-dependent parameters + * @adap: the adapter + * @page_size: the host's Base Page Size + * @cache_line_size: the host's Cache Line Size + * + * Various registers in T4 contain values which are dependent on the + * host's Base Page and Cache Line Sizes. This function will fix all of + * those registers with the appropriate values as passed in ... + */ +int t4_fixup_host_params(struct adapter *adap, unsigned int page_size, + unsigned int cache_line_size) +{ + unsigned int page_shift = fls(page_size) - 1; + unsigned int sge_hps = page_shift - 10; + unsigned int stat_len = cache_line_size > 64 ? 128 : 64; + unsigned int fl_align = cache_line_size < 32 ? 32 : cache_line_size; + unsigned int fl_align_log = fls(fl_align) - 1; + + t4_write_reg(adap, SGE_HOST_PAGE_SIZE, + HOSTPAGESIZEPF0(sge_hps) | + HOSTPAGESIZEPF1(sge_hps) | + HOSTPAGESIZEPF2(sge_hps) | + HOSTPAGESIZEPF3(sge_hps) | + HOSTPAGESIZEPF4(sge_hps) | + HOSTPAGESIZEPF5(sge_hps) | + HOSTPAGESIZEPF6(sge_hps) | + HOSTPAGESIZEPF7(sge_hps)); + + t4_set_reg_field(adap, SGE_CONTROL, + INGPADBOUNDARY(INGPADBOUNDARY_MASK) | + EGRSTATUSPAGESIZE_MASK, + INGPADBOUNDARY(fl_align_log - 5) | + EGRSTATUSPAGESIZE(stat_len != 64)); + + /* + * Adjust various SGE Free List Host Buffer Sizes. + * + * This is something of a crock since we're using fixed indices into + * the array which are also known by the sge.c code and the T4 + * Firmware Configuration File. We need to come up with a much better + * approach to managing this array. For now, the first four entries + * are: + * + * 0: Host Page Size + * 1: 64KB + * 2: Buffer size corresponding to 1500 byte MTU (unpacked mode) + * 3: Buffer size corresponding to 9000 byte MTU (unpacked mode) + * + * For the single-MTU buffers in unpacked mode we need to include + * space for the SGE Control Packet Shift, 14 byte Ethernet header, + * possible 4 byte VLAN tag, all rounded up to the next Ingress Packet + * Padding boundry. All of these are accommodated in the Factory + * Default Firmware Configuration File but we need to adjust it for + * this host's cache line size. + */ + t4_write_reg(adap, SGE_FL_BUFFER_SIZE0, page_size); + t4_write_reg(adap, SGE_FL_BUFFER_SIZE2, + (t4_read_reg(adap, SGE_FL_BUFFER_SIZE2) + fl_align-1) + & ~(fl_align-1)); + t4_write_reg(adap, SGE_FL_BUFFER_SIZE3, + (t4_read_reg(adap, SGE_FL_BUFFER_SIZE3) + fl_align-1) + & ~(fl_align-1)); + + t4_write_reg(adap, ULP_RX_TDDP_PSZ, HPZ0(page_shift - 12)); + + return 0; +} + +/** + * t4_fw_initialize - ask FW to initialize the device + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * + * Issues a command to FW to partially initialize the device. This + * performs initialization that generally doesn't depend on user input. + */ +int t4_fw_initialize(struct adapter *adap, unsigned int mbox) +{ + struct fw_initialize_cmd c; + + memset(&c, 0, sizeof(c)); + INIT_CMD(c, INITIALIZE, WRITE); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** * t4_query_params - query FW or device parameters * @adap: the adapter * @mbox: mailbox to use for the FW command @@ -2835,10 +3514,6 @@ int __devinit t4_prep_adapter(struct adapter *adapter) return ret; } - ret = get_vpd_params(adapter, &adapter->params.vpd); - if (ret < 0) - return ret; - init_cong_ctrl(adapter->params.a_wnd, adapter->params.b_wnd); /* @@ -2846,6 +3521,7 @@ int __devinit t4_prep_adapter(struct adapter *adapter) */ adapter->params.nports = 1; adapter->params.portvec = 1; + adapter->params.vpd.cclk = 50000; return 0; } diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h index c26b455..f534ed7 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h @@ -58,6 +58,7 @@ enum { enum { SF_PAGE_SIZE = 256, /* serial flash page size */ + SF_SEC_SIZE = 64 * 1024, /* serial flash sector size */ }; enum { RSP_TYPE_FLBUF, RSP_TYPE_CPL, RSP_TYPE_INTR }; /* response entry types */ @@ -137,4 +138,83 @@ struct rsp_ctrl { #define QINTR_CNT_EN 0x1 #define QINTR_TIMER_IDX(x) ((x) << 1) #define QINTR_TIMER_IDX_GET(x) (((x) >> 1) & 0x7) + +/* + * Flash layout. + */ +#define FLASH_START(start) ((start) * SF_SEC_SIZE) +#define FLASH_MAX_SIZE(nsecs) ((nsecs) * SF_SEC_SIZE) + +enum { + /* + * Various Expansion-ROM boot images, etc. + */ + FLASH_EXP_ROM_START_SEC = 0, + FLASH_EXP_ROM_NSECS = 6, + FLASH_EXP_ROM_START = FLASH_START(FLASH_EXP_ROM_START_SEC), + FLASH_EXP_ROM_MAX_SIZE = FLASH_MAX_SIZE(FLASH_EXP_ROM_NSECS), + + /* + * iSCSI Boot Firmware Table (iBFT) and other driver-related + * parameters ... + */ + FLASH_IBFT_START_SEC = 6, + FLASH_IBFT_NSECS = 1, + FLASH_IBFT_START = FLASH_START(FLASH_IBFT_START_SEC), + FLASH_IBFT_MAX_SIZE = FLASH_MAX_SIZE(FLASH_IBFT_NSECS), + + /* + * Boot configuration data. + */ + FLASH_BOOTCFG_START_SEC = 7, + FLASH_BOOTCFG_NSECS = 1, + FLASH_BOOTCFG_START = FLASH_START(FLASH_BOOTCFG_START_SEC), + FLASH_BOOTCFG_MAX_SIZE = FLASH_MAX_SIZE(FLASH_BOOTCFG_NSECS), + + /* + * Location of firmware image in FLASH. + */ + FLASH_FW_START_SEC = 8, + FLASH_FW_NSECS = 8, + FLASH_FW_START = FLASH_START(FLASH_FW_START_SEC), + FLASH_FW_MAX_SIZE = FLASH_MAX_SIZE(FLASH_FW_NSECS), + + /* + * iSCSI persistent/crash information. + */ + FLASH_ISCSI_CRASH_START_SEC = 29, + FLASH_ISCSI_CRASH_NSECS = 1, + FLASH_ISCSI_CRASH_START = FLASH_START(FLASH_ISCSI_CRASH_START_SEC), + FLASH_ISCSI_CRASH_MAX_SIZE = FLASH_MAX_SIZE(FLASH_ISCSI_CRASH_NSECS), + + /* + * FCoE persistent/crash information. + */ + FLASH_FCOE_CRASH_START_SEC = 30, + FLASH_FCOE_CRASH_NSECS = 1, + FLASH_FCOE_CRASH_START = FLASH_START(FLASH_FCOE_CRASH_START_SEC), + FLASH_FCOE_CRASH_MAX_SIZE = FLASH_MAX_SIZE(FLASH_FCOE_CRASH_NSECS), + + /* + * Location of Firmware Configuration File in FLASH. Since the FPGA + * "FLASH" is smaller we need to store the Configuration File in a + * different location -- which will overlap the end of the firmware + * image if firmware ever gets that large ... + */ + FLASH_CFG_START_SEC = 31, + FLASH_CFG_NSECS = 1, + FLASH_CFG_START = FLASH_START(FLASH_CFG_START_SEC), + FLASH_CFG_MAX_SIZE = FLASH_MAX_SIZE(FLASH_CFG_NSECS), + + FLASH_FPGA_CFG_START_SEC = 15, + FLASH_FPGA_CFG_START = FLASH_START(FLASH_FPGA_CFG_START_SEC), + + /* + * Sectors 32-63 are reserved for FLASH failover. + */ +}; + +#undef FLASH_START +#undef FLASH_MAX_SIZE + #endif /* __T4_HW_H */ diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h index 111fc32..a1a8b57 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h @@ -86,10 +86,17 @@ #define CIDXINC_SHIFT 0 #define CIDXINC(x) ((x) << CIDXINC_SHIFT) +#define X_RXPKTCPLMODE_SPLIT 1 +#define X_INGPADBOUNDARY_SHIFT 5 + #define SGE_CONTROL 0x1008 #define DCASYSTYPE 0x00080000U -#define RXPKTCPLMODE 0x00040000U -#define EGRSTATUSPAGESIZE 0x00020000U +#define RXPKTCPLMODE_MASK 0x00040000U +#define RXPKTCPLMODE_SHIFT 18 +#define RXPKTCPLMODE(x) ((x) << RXPKTCPLMODE_SHIFT) +#define EGRSTATUSPAGESIZE_MASK 0x00020000U +#define EGRSTATUSPAGESIZE_SHIFT 17 +#define EGRSTATUSPAGESIZE(x) ((x) << EGRSTATUSPAGESIZE_SHIFT) #define PKTSHIFT_MASK 0x00001c00U #define PKTSHIFT_SHIFT 10 #define PKTSHIFT(x) ((x) << PKTSHIFT_SHIFT) @@ -108,6 +115,35 @@ #define GLOBALENABLE 0x00000001U #define SGE_HOST_PAGE_SIZE 0x100c + +#define HOSTPAGESIZEPF7_MASK 0x0000000fU +#define HOSTPAGESIZEPF7_SHIFT 28 +#define HOSTPAGESIZEPF7(x) ((x) << HOSTPAGESIZEPF7_SHIFT) + +#define HOSTPAGESIZEPF6_MASK 0x0000000fU +#define HOSTPAGESIZEPF6_SHIFT 24 +#define HOSTPAGESIZEPF6(x) ((x) << HOSTPAGESIZEPF6_SHIFT) + +#define HOSTPAGESIZEPF5_MASK 0x0000000fU +#define HOSTPAGESIZEPF5_SHIFT 20 +#define HOSTPAGESIZEPF5(x) ((x) << HOSTPAGESIZEPF5_SHIFT) + +#define HOSTPAGESIZEPF4_MASK 0x0000000fU +#define HOSTPAGESIZEPF4_SHIFT 16 +#define HOSTPAGESIZEPF4(x) ((x) << HOSTPAGESIZEPF4_SHIFT) + +#define HOSTPAGESIZEPF3_MASK 0x0000000fU +#define HOSTPAGESIZEPF3_SHIFT 12 +#define HOSTPAGESIZEPF3(x) ((x) << HOSTPAGESIZEPF3_SHIFT) + +#define HOSTPAGESIZEPF2_MASK 0x0000000fU +#define HOSTPAGESIZEPF2_SHIFT 8 +#define HOSTPAGESIZEPF2(x) ((x) << HOSTPAGESIZEPF2_SHIFT) + +#define HOSTPAGESIZEPF1_MASK 0x0000000fU +#define HOSTPAGESIZEPF1_SHIFT 4 +#define HOSTPAGESIZEPF1(x) ((x) << HOSTPAGESIZEPF1_SHIFT) + #define HOSTPAGESIZEPF0_MASK 0x0000000fU #define HOSTPAGESIZEPF0_SHIFT 0 #define HOSTPAGESIZEPF0(x) ((x) << HOSTPAGESIZEPF0_SHIFT) @@ -155,6 +191,8 @@ #define SGE_INT_ENABLE3 0x1040 #define SGE_FL_BUFFER_SIZE0 0x1044 #define SGE_FL_BUFFER_SIZE1 0x1048 +#define SGE_FL_BUFFER_SIZE2 0x104c +#define SGE_FL_BUFFER_SIZE3 0x1050 #define SGE_INGRESS_RX_THRESHOLD 0x10a0 #define THRESHOLD_0_MASK 0x3f000000U #define THRESHOLD_0_SHIFT 24 @@ -173,6 +211,12 @@ #define THRESHOLD_3(x) ((x) << THRESHOLD_3_SHIFT) #define THRESHOLD_3_GET(x) (((x) & THRESHOLD_3_MASK) >> THRESHOLD_3_SHIFT) +#define SGE_CONM_CTRL 0x1094 +#define EGRTHRESHOLD_MASK 0x00003f00U +#define EGRTHRESHOLDshift 8 +#define EGRTHRESHOLD(x) ((x) << EGRTHRESHOLDshift) +#define EGRTHRESHOLD_GET(x) (((x) & EGRTHRESHOLD_MASK) >> EGRTHRESHOLDshift) + #define SGE_TIMER_VALUE_0_AND_1 0x10b8 #define TIMERVALUE0_MASK 0xffff0000U #define TIMERVALUE0_SHIFT 16 @@ -184,64 +228,54 @@ #define TIMERVALUE1_GET(x) (((x) & TIMERVALUE1_MASK) >> TIMERVALUE1_SHIFT) #define SGE_TIMER_VALUE_2_AND_3 0x10bc +#define TIMERVALUE2_MASK 0xffff0000U +#define TIMERVALUE2_SHIFT 16 +#define TIMERVALUE2(x) ((x) << TIMERVALUE2_SHIFT) +#define TIMERVALUE2_GET(x) (((x) & TIMERVALUE2_MASK) >> TIMERVALUE2_SHIFT) +#define TIMERVALUE3_MASK 0x0000ffffU +#define TIMERVALUE3_SHIFT 0 +#define TIMERVALUE3(x) ((x) << TIMERVALUE3_SHIFT) +#define TIMERVALUE3_GET(x) (((x) & TIMERVALUE3_MASK) >> TIMERVALUE3_SHIFT) + #define SGE_TIMER_VALUE_4_AND_5 0x10c0 +#define TIMERVALUE4_MASK 0xffff0000U +#define TIMERVALUE4_SHIFT 16 +#define TIMERVALUE4(x) ((x) << TIMERVALUE4_SHIFT) +#define TIMERVALUE4_GET(x) (((x) & TIMERVALUE4_MASK) >> TIMERVALUE4_SHIFT) +#define TIMERVALUE5_MASK 0x0000ffffU +#define TIMERVALUE5_SHIFT 0 +#define TIMERVALUE5(x) ((x) << TIMERVALUE5_SHIFT) +#define TIMERVALUE5_GET(x) (((x) & TIMERVALUE5_MASK) >> TIMERVALUE5_SHIFT) + #define SGE_DEBUG_INDEX 0x10cc #define SGE_DEBUG_DATA_HIGH 0x10d0 #define SGE_DEBUG_DATA_LOW 0x10d4 #define SGE_INGRESS_QUEUES_PER_PAGE_PF 0x10f4 -#define S_LP_INT_THRESH 12 -#define V_LP_INT_THRESH(x) ((x) << S_LP_INT_THRESH) #define S_HP_INT_THRESH 28 +#define M_HP_INT_THRESH 0xfU #define V_HP_INT_THRESH(x) ((x) << S_HP_INT_THRESH) +#define M_HP_COUNT 0x7ffU +#define S_HP_COUNT 16 +#define G_HP_COUNT(x) (((x) >> S_HP_COUNT) & M_HP_COUNT) +#define S_LP_INT_THRESH 12 +#define M_LP_INT_THRESH 0xfU +#define V_LP_INT_THRESH(x) ((x) << S_LP_INT_THRESH) +#define M_LP_COUNT 0x7ffU +#define S_LP_COUNT 0 +#define G_LP_COUNT(x) (((x) >> S_LP_COUNT) & M_LP_COUNT) #define A_SGE_DBFIFO_STATUS 0x10a4 #define S_ENABLE_DROP 13 #define V_ENABLE_DROP(x) ((x) << S_ENABLE_DROP) #define F_ENABLE_DROP V_ENABLE_DROP(1U) -#define A_SGE_DOORBELL_CONTROL 0x10a8 - -#define A_SGE_CTXT_CMD 0x11fc -#define A_SGE_DBQ_CTXT_BADDR 0x1084 - -#define A_SGE_PF_KDOORBELL 0x0 - -#define S_QID 15 -#define V_QID(x) ((x) << S_QID) - -#define S_PIDX 0 -#define V_PIDX(x) ((x) << S_PIDX) - -#define M_LP_COUNT 0x7ffU -#define S_LP_COUNT 0 -#define G_LP_COUNT(x) (((x) >> S_LP_COUNT) & M_LP_COUNT) - -#define M_HP_COUNT 0x7ffU -#define S_HP_COUNT 16 -#define G_HP_COUNT(x) (((x) >> S_HP_COUNT) & M_HP_COUNT) - -#define A_SGE_INT_ENABLE3 0x1040 - -#define S_DBFIFO_HP_INT 8 -#define V_DBFIFO_HP_INT(x) ((x) << S_DBFIFO_HP_INT) -#define F_DBFIFO_HP_INT V_DBFIFO_HP_INT(1U) - -#define S_DBFIFO_LP_INT 7 -#define V_DBFIFO_LP_INT(x) ((x) << S_DBFIFO_LP_INT) -#define F_DBFIFO_LP_INT V_DBFIFO_LP_INT(1U) - #define S_DROPPED_DB 0 #define V_DROPPED_DB(x) ((x) << S_DROPPED_DB) #define F_DROPPED_DB V_DROPPED_DB(1U) +#define A_SGE_DOORBELL_CONTROL 0x10a8 -#define S_ERR_DROPPED_DB 18 -#define V_ERR_DROPPED_DB(x) ((x) << S_ERR_DROPPED_DB) -#define F_ERR_DROPPED_DB V_ERR_DROPPED_DB(1U) - -#define A_PCIE_MEM_ACCESS_OFFSET 0x306c - -#define M_HP_INT_THRESH 0xfU -#define M_LP_INT_THRESH 0xfU +#define A_SGE_CTXT_CMD 0x11fc +#define A_SGE_DBQ_CTXT_BADDR 0x1084 #define PCIE_PF_CLI 0x44 #define PCIE_INT_CAUSE 0x3004 @@ -287,6 +321,8 @@ #define WINDOW(x) ((x) << WINDOW_SHIFT) #define PCIE_MEM_ACCESS_OFFSET 0x306c +#define PCIE_FW 0x30b8 + #define PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS 0x5908 #define RNPP 0x80000000U #define RPCP 0x20000000U @@ -364,7 +400,7 @@ #define MEM_WRAP_CLIENT_NUM_MASK 0x0000000fU #define MEM_WRAP_CLIENT_NUM_SHIFT 0 #define MEM_WRAP_CLIENT_NUM_GET(x) (((x) & MEM_WRAP_CLIENT_NUM_MASK) >> MEM_WRAP_CLIENT_NUM_SHIFT) - +#define MA_PCIE_FW 0x30b8 #define MA_PARITY_ERROR_STATUS 0x77f4 #define EDC_0_BASE_ADDR 0x7900 @@ -385,6 +421,7 @@ #define CIM_BOOT_CFG 0x7b00 #define BOOTADDR_MASK 0xffffff00U +#define UPCRST 0x1U #define CIM_PF_MAILBOX_DATA 0x240 #define CIM_PF_MAILBOX_CTRL 0x280 @@ -457,6 +494,13 @@ #define VLANEXTENABLE_MASK 0x0000f000U #define VLANEXTENABLE_SHIFT 12 +#define TP_GLOBAL_CONFIG 0x7d08 +#define FIVETUPLELOOKUP_SHIFT 17 +#define FIVETUPLELOOKUP_MASK 0x00060000U +#define FIVETUPLELOOKUP(x) ((x) << FIVETUPLELOOKUP_SHIFT) +#define FIVETUPLELOOKUP_GET(x) (((x) & FIVETUPLELOOKUP_MASK) >> \ + FIVETUPLELOOKUP_SHIFT) + #define TP_PARA_REG2 0x7d68 #define MAXRXDATA_MASK 0xffff0000U #define MAXRXDATA_SHIFT 16 @@ -466,8 +510,47 @@ #define TIMERRESOLUTION_MASK 0x00ff0000U #define TIMERRESOLUTION_SHIFT 16 #define TIMERRESOLUTION_GET(x) (((x) & TIMERRESOLUTION_MASK) >> TIMERRESOLUTION_SHIFT) +#define DELAYEDACKRESOLUTION_MASK 0x000000ffU +#define DELAYEDACKRESOLUTION_SHIFT 0 +#define DELAYEDACKRESOLUTION_GET(x) \ + (((x) & DELAYEDACKRESOLUTION_MASK) >> DELAYEDACKRESOLUTION_SHIFT) #define TP_SHIFT_CNT 0x7dc0 +#define SYNSHIFTMAX_SHIFT 24 +#define SYNSHIFTMAX_MASK 0xff000000U +#define SYNSHIFTMAX(x) ((x) << SYNSHIFTMAX_SHIFT) +#define SYNSHIFTMAX_GET(x) (((x) & SYNSHIFTMAX_MASK) >> \ + SYNSHIFTMAX_SHIFT) +#define RXTSHIFTMAXR1_SHIFT 20 +#define RXTSHIFTMAXR1_MASK 0x00f00000U +#define RXTSHIFTMAXR1(x) ((x) << RXTSHIFTMAXR1_SHIFT) +#define RXTSHIFTMAXR1_GET(x) (((x) & RXTSHIFTMAXR1_MASK) >> \ + RXTSHIFTMAXR1_SHIFT) +#define RXTSHIFTMAXR2_SHIFT 16 +#define RXTSHIFTMAXR2_MASK 0x000f0000U +#define RXTSHIFTMAXR2(x) ((x) << RXTSHIFTMAXR2_SHIFT) +#define RXTSHIFTMAXR2_GET(x) (((x) & RXTSHIFTMAXR2_MASK) >> \ + RXTSHIFTMAXR2_SHIFT) +#define PERSHIFTBACKOFFMAX_SHIFT 12 +#define PERSHIFTBACKOFFMAX_MASK 0x0000f000U +#define PERSHIFTBACKOFFMAX(x) ((x) << PERSHIFTBACKOFFMAX_SHIFT) +#define PERSHIFTBACKOFFMAX_GET(x) (((x) & PERSHIFTBACKOFFMAX_MASK) >> \ + PERSHIFTBACKOFFMAX_SHIFT) +#define PERSHIFTMAX_SHIFT 8 +#define PERSHIFTMAX_MASK 0x00000f00U +#define PERSHIFTMAX(x) ((x) << PERSHIFTMAX_SHIFT) +#define PERSHIFTMAX_GET(x) (((x) & PERSHIFTMAX_MASK) >> \ + PERSHIFTMAX_SHIFT) +#define KEEPALIVEMAXR1_SHIFT 4 +#define KEEPALIVEMAXR1_MASK 0x000000f0U +#define KEEPALIVEMAXR1(x) ((x) << KEEPALIVEMAXR1_SHIFT) +#define KEEPALIVEMAXR1_GET(x) (((x) & KEEPALIVEMAXR1_MASK) >> \ + KEEPALIVEMAXR1_SHIFT) +#define KEEPALIVEMAXR2_SHIFT 0 +#define KEEPALIVEMAXR2_MASK 0x0000000fU +#define KEEPALIVEMAXR2(x) ((x) << KEEPALIVEMAXR2_SHIFT) +#define KEEPALIVEMAXR2_GET(x) (((x) & KEEPALIVEMAXR2_MASK) >> \ + KEEPALIVEMAXR2_SHIFT) #define TP_CCTRL_TABLE 0x7ddc #define TP_MTU_TABLE 0x7de4 @@ -501,6 +584,20 @@ #define TP_INT_CAUSE 0x7e74 #define FLMTXFLSTEMPTY 0x40000000U +#define TP_VLAN_PRI_MAP 0x140 +#define FRAGMENTATION_SHIFT 9 +#define FRAGMENTATION_MASK 0x00000200U +#define MPSHITTYPE_MASK 0x00000100U +#define MACMATCH_MASK 0x00000080U +#define ETHERTYPE_MASK 0x00000040U +#define PROTOCOL_MASK 0x00000020U +#define TOS_MASK 0x00000010U +#define VLAN_MASK 0x00000008U +#define VNIC_ID_MASK 0x00000004U +#define PORT_MASK 0x00000002U +#define FCOE_SHIFT 0 +#define FCOE_MASK 0x00000001U + #define TP_INGRESS_CONFIG 0x141 #define VNIC 0x00000800U #define CSUM_HAS_PSEUDO_HDR 0x00000400U diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h index ad53f79..a636463 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h @@ -79,6 +79,8 @@ struct fw_wr_hdr { #define FW_WR_FLOWID(x) ((x) << 8) #define FW_WR_LEN16(x) ((x) << 0) +#define HW_TPL_FR_MT_PR_IV_P_FC 0X32B + struct fw_ulptx_wr { __be32 op_to_compl; __be32 flowid_len16; @@ -155,6 +157,17 @@ struct fw_eth_tx_pkt_vm_wr { #define FW_CMD_MAX_TIMEOUT 3000 +/* + * If a host driver does a HELLO and discovers that there's already a MASTER + * selected, we may have to wait for that MASTER to finish issuing RESET, + * configuration and INITIALIZE commands. Also, there's a possibility that + * our own HELLO may get lost if it happens right as the MASTER is issuign a + * RESET command, so we need to be willing to make a few retries of our HELLO. + */ +#define FW_CMD_HELLO_TIMEOUT (3 * FW_CMD_MAX_TIMEOUT) +#define FW_CMD_HELLO_RETRIES 3 + + enum fw_cmd_opcodes { FW_LDST_CMD = 0x01, FW_RESET_CMD = 0x03, @@ -304,7 +317,17 @@ struct fw_reset_cmd { __be32 op_to_write; __be32 retval_len16; __be32 val; - __be32 r3; + __be32 halt_pkd; +}; + +#define FW_RESET_CMD_HALT_SHIFT 31 +#define FW_RESET_CMD_HALT_MASK 0x1 +#define FW_RESET_CMD_HALT(x) ((x) << FW_RESET_CMD_HALT_SHIFT) +#define FW_RESET_CMD_HALT_GET(x) \ + (((x) >> FW_RESET_CMD_HALT_SHIFT) & FW_RESET_CMD_HALT_MASK) + +enum fw_hellow_cmd { + fw_hello_cmd_stage_os = 0x0 }; struct fw_hello_cmd { @@ -315,8 +338,14 @@ struct fw_hello_cmd { #define FW_HELLO_CMD_INIT (1U << 30) #define FW_HELLO_CMD_MASTERDIS(x) ((x) << 29) #define FW_HELLO_CMD_MASTERFORCE(x) ((x) << 28) -#define FW_HELLO_CMD_MBMASTER(x) ((x) << 24) +#define FW_HELLO_CMD_MBMASTER_MASK 0xfU +#define FW_HELLO_CMD_MBMASTER_SHIFT 24 +#define FW_HELLO_CMD_MBMASTER(x) ((x) << FW_HELLO_CMD_MBMASTER_SHIFT) +#define FW_HELLO_CMD_MBMASTER_GET(x) \ + (((x) >> FW_HELLO_CMD_MBMASTER_SHIFT) & FW_HELLO_CMD_MBMASTER_MASK) #define FW_HELLO_CMD_MBASYNCNOT(x) ((x) << 20) +#define FW_HELLO_CMD_STAGE(x) ((x) << 17) +#define FW_HELLO_CMD_CLEARINIT (1U << 16) __be32 fwrev; }; @@ -401,6 +430,14 @@ enum fw_caps_config_fcoe { FW_CAPS_CONFIG_FCOE_TARGET = 0x00000002, }; +enum fw_memtype_cf { + FW_MEMTYPE_CF_EDC0 = 0x0, + FW_MEMTYPE_CF_EDC1 = 0x1, + FW_MEMTYPE_CF_EXTMEM = 0x2, + FW_MEMTYPE_CF_FLASH = 0x4, + FW_MEMTYPE_CF_INTERNAL = 0x5, +}; + struct fw_caps_config_cmd { __be32 op_to_write; __be32 retval_len16; @@ -416,10 +453,15 @@ struct fw_caps_config_cmd { __be16 r4; __be16 iscsicaps; __be16 fcoecaps; - __be32 r5; - __be64 r6; + __be32 cfcsum; + __be32 finiver; + __be32 finicsum; }; +#define FW_CAPS_CONFIG_CMD_CFVALID (1U << 27) +#define FW_CAPS_CONFIG_CMD_MEMTYPE_CF(x) ((x) << 24) +#define FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(x) ((x) << 16) + /* * params command mnemonics */ @@ -451,6 +493,7 @@ enum fw_params_param_dev { FW_PARAMS_PARAM_DEV_INTVER_FCOE = 0x0A, FW_PARAMS_PARAM_DEV_FWREV = 0x0B, FW_PARAMS_PARAM_DEV_TPREV = 0x0C, + FW_PARAMS_PARAM_DEV_CF = 0x0D, }; /* @@ -492,6 +535,8 @@ enum fw_params_param_pfvf { FW_PARAMS_PARAM_PFVF_IQFLINT_END = 0x2A, FW_PARAMS_PARAM_PFVF_EQ_START = 0x2B, FW_PARAMS_PARAM_PFVF_EQ_END = 0x2C, + FW_PARAMS_PARAM_PFVF_ACTIVE_FILTER_START = 0x2D, + FW_PARAMS_PARAM_PFVF_ACTIVE_FILTER_END = 0x2E }; /* @@ -507,8 +552,16 @@ enum fw_params_param_dmaq { #define FW_PARAMS_MNEM(x) ((x) << 24) #define FW_PARAMS_PARAM_X(x) ((x) << 16) -#define FW_PARAMS_PARAM_Y(x) ((x) << 8) -#define FW_PARAMS_PARAM_Z(x) ((x) << 0) +#define FW_PARAMS_PARAM_Y_SHIFT 8 +#define FW_PARAMS_PARAM_Y_MASK 0xffU +#define FW_PARAMS_PARAM_Y(x) ((x) << FW_PARAMS_PARAM_Y_SHIFT) +#define FW_PARAMS_PARAM_Y_GET(x) (((x) >> FW_PARAMS_PARAM_Y_SHIFT) &\ + FW_PARAMS_PARAM_Y_MASK) +#define FW_PARAMS_PARAM_Z_SHIFT 0 +#define FW_PARAMS_PARAM_Z_MASK 0xffu +#define FW_PARAMS_PARAM_Z(x) ((x) << FW_PARAMS_PARAM_Z_SHIFT) +#define FW_PARAMS_PARAM_Z_GET(x) (((x) >> FW_PARAMS_PARAM_Z_SHIFT) &\ + FW_PARAMS_PARAM_Z_MASK) #define FW_PARAMS_PARAM_XYZ(x) ((x) << 0) #define FW_PARAMS_PARAM_YZ(x) ((x) << 0) @@ -1599,6 +1652,16 @@ struct fw_debug_cmd { } u; }; +#define FW_PCIE_FW_ERR (1U << 31) +#define FW_PCIE_FW_INIT (1U << 30) +#define FW_PCIE_FW_HALT (1U << 29) +#define FW_PCIE_FW_MASTER_VLD (1U << 15) +#define FW_PCIE_FW_MASTER_MASK 0x7 +#define FW_PCIE_FW_MASTER_SHIFT 12 +#define FW_PCIE_FW_MASTER(x) ((x) << FW_PCIE_FW_MASTER_SHIFT) +#define FW_PCIE_FW_MASTER_GET(x) (((x) >> FW_PCIE_FW_MASTER_SHIFT) & \ + FW_PCIE_FW_MASTER_MASK) + struct fw_hdr { u8 ver; u8 reserved1; @@ -1613,7 +1676,11 @@ struct fw_hdr { u8 intfver_iscsi; u8 intfver_fcoe; u8 reserved2; - __be32 reserved3[27]; + __u32 reserved3; + __u32 reserved4; + __u32 reserved5; + __be32 flags; + __be32 reserved6[23]; }; #define FW_HDR_FW_VER_MAJOR_GET(x) (((x) >> 24) & 0xff) @@ -1621,18 +1688,8 @@ struct fw_hdr { #define FW_HDR_FW_VER_MICRO_GET(x) (((x) >> 8) & 0xff) #define FW_HDR_FW_VER_BUILD_GET(x) (((x) >> 0) & 0xff) -#define S_FW_CMD_OP 24 -#define V_FW_CMD_OP(x) ((x) << S_FW_CMD_OP) - -#define S_FW_CMD_REQUEST 23 -#define V_FW_CMD_REQUEST(x) ((x) << S_FW_CMD_REQUEST) -#define F_FW_CMD_REQUEST V_FW_CMD_REQUEST(1U) - -#define S_FW_CMD_WRITE 21 -#define V_FW_CMD_WRITE(x) ((x) << S_FW_CMD_WRITE) -#define F_FW_CMD_WRITE V_FW_CMD_WRITE(1U) - -#define S_FW_LDST_CMD_ADDRSPACE 0 -#define V_FW_LDST_CMD_ADDRSPACE(x) ((x) << S_FW_LDST_CMD_ADDRSPACE) +enum fw_hdr_flags { + FW_HDR_FLAGS_RESET_HALT = 0x00000001, +}; #endif /* _T4FW_INTERFACE_H_ */ |